embassy/examples/stm32f7/src/bin/eth.rs

#![no_std]
#![no_main]
#![feature(type_alias_impl_trait)]

use defmt::*;
use embassy_executor::Spawner;
use embassy_net::tcp::TcpSocket;
use embassy_net::{Ipv4Address, Stack, StackResources};
use embassy_stm32::eth::generic_smi::GenericSMI;
use embassy_stm32::eth::{Ethernet, PacketQueue};
use embassy_stm32::peripherals::ETH;
use embassy_stm32::rng::Rng;
use embassy_stm32::time::Hertz;
use embassy_stm32::{bind_interrupts, eth, peripherals, rng, Config};
use embassy_time::Timer;
use embedded_io_async::Write;
use rand_core::RngCore;
use static_cell::make_static;
use {defmt_rtt as _, panic_probe as _};

bind_interrupts!(struct Irqs {
    ETH => eth::InterruptHandler;
    RNG => rng::InterruptHandler<peripherals::RNG>;
});

type Device = Ethernet<'static, ETH, GenericSMI>;

#[embassy_executor::task]
async fn net_task(stack: &'static Stack<Device>) -> ! {
    stack.run().await
}

#[embassy_executor::main]
async fn main(spawner: Spawner) -> ! {
    let mut config = Config::default();
    {
        use embassy_stm32::rcc::*;
        config.rcc.hse = Some(Hse {
            freq: Hertz(8_000_000),
            mode: HseMode::Bypass,
        });
        config.rcc.pll_src = PllSource::HSE;
        config.rcc.pll = Some(Pll {
            prediv: PllPreDiv::DIV4,
            mul: PllMul::MUL216,
            divp: Some(Pllp::DIV2), // 8mhz / 4 * 216 / 2 = 216Mhz
            divq: None,
            divr: None,
        });
        config.rcc.ahb_pre = AHBPrescaler::DIV1;
        config.rcc.apb1_pre = APBPrescaler::DIV4;
        config.rcc.apb2_pre = APBPrescaler::DIV2;
        config.rcc.sys = Sysclk::PLL1_P;
    }
    let p = embassy_stm32::init(config);

    info!("Hello World!");

    // Generate random seed.
    let mut rng = Rng::new(p.RNG, Irqs);
    let mut seed = [0; 8];
    rng.fill_bytes(&mut seed);
    let seed = u64::from_le_bytes(seed);

    let mac_addr = [0x00, 0x00, 0xDE, 0xAD, 0xBE, 0xEF];

    let device = Ethernet::new(
        make_static!(PacketQueue::<16, 16>::new()),
        p.ETH,
        Irqs,
        p.PA1,
        p.PA2,
        p.PC1,
        p.PA7,
        p.PC4,
        p.PC5,
        p.PG13,
        p.PB13,
        p.PG11,
        GenericSMI::new(0),
        mac_addr,
    );

    let config = embassy_net::Config::dhcpv4(Default::default());
    //let config = embassy_net::Config::ipv4_static(embassy_net::StaticConfigV4 {
    //    address: Ipv4Cidr::new(Ipv4Address::new(10, 42, 0, 61), 24),
    //    dns_servers: Vec::new(),
    //    gateway: Some(Ipv4Address::new(10, 42, 0, 1)),
    //});

    // Init network stack
    let stack = &*make_static!(Stack::new(
        device,
        config,
        make_static!(StackResources::<2>::new()),
        seed
    ));

    // Launch network task
    unwrap!(spawner.spawn(net_task(stack)));

    // Ensure DHCP configuration is up before trying connect
    stack.wait_config_up().await;

    info!("Network task initialized");

    // Then we can use it!
    let mut rx_buffer = [0; 4096];
    let mut tx_buffer = [0; 4096];

    loop {
        let mut socket = TcpSocket::new(&stack, &mut rx_buffer, &mut tx_buffer);

        socket.set_timeout(Some(embassy_time::Duration::from_secs(10)));

        let remote_endpoint = (Ipv4Address::new(10, 42, 0, 1), 8000);
        info!("connecting...");
        let r = socket.connect(remote_endpoint).await;
        if let Err(e) = r {
            info!("connect error: {:?}", e);
            Timer::after_secs(1).await;
            continue;
        }
        info!("connected!");
        let buf = [0; 1024];
        loop {
            let r = socket.write_all(&buf).await;
            if let Err(e) = r {
                info!("write error: {:?}", e);
                break;
            }
            Timer::after_secs(1).await;
        }
    }
}