embassy/examples/rp/src/bin/wifi_ap_tcp_server.rs

//! This example uses the RP Pico W board Wifi chip (cyw43).
//! Creates an Access point Wifi network and creates a TCP endpoint on port 1234.

#![no_std]
#![no_main]
#![feature(type_alias_impl_trait)]
#![feature(async_fn_in_trait)]
#![allow(stable_features, unknown_lints, async_fn_in_trait)]

use core::str::from_utf8;

use cyw43_pio::PioSpi;
use defmt::*;
use embassy_executor::Spawner;
use embassy_net::tcp::TcpSocket;
use embassy_net::{Config, Stack, StackResources};
use embassy_rp::bind_interrupts;
use embassy_rp::gpio::{Level, Output};
use embassy_rp::peripherals::{DMA_CH0, PIN_23, PIN_25, PIO0};
use embassy_rp::pio::{InterruptHandler, Pio};
use embassy_time::Duration;
use embedded_io_async::Write;
use static_cell::make_static;
use {defmt_rtt as _, panic_probe as _};

bind_interrupts!(struct Irqs {
    PIO0_IRQ_0 => InterruptHandler<PIO0>;
});

#[embassy_executor::task]
async fn wifi_task(
    runner: cyw43::Runner<'static, Output<'static, PIN_23>, PioSpi<'static, PIN_25, PIO0, 0, DMA_CH0>>,
) -> ! {
    runner.run().await
}

#[embassy_executor::task]
async fn net_task(stack: &'static Stack<cyw43::NetDriver<'static>>) -> ! {
    stack.run().await
}

#[embassy_executor::main]
async fn main(spawner: Spawner) {
    info!("Hello World!");

    let p = embassy_rp::init(Default::default());

    let fw = include_bytes!("../../../../cyw43-firmware/43439A0.bin");
    let clm = include_bytes!("../../../../cyw43-firmware/43439A0_clm.bin");

    // To make flashing faster for development, you may want to flash the firmwares independently
    // at hardcoded addresses, instead of baking them into the program with `include_bytes!`:
    //     probe-rs download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
    //     probe-rs download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
    //let fw = unsafe { core::slice::from_raw_parts(0x10100000 as *const u8, 230321) };
    //let clm = unsafe { core::slice::from_raw_parts(0x10140000 as *const u8, 4752) };

    let pwr = Output::new(p.PIN_23, Level::Low);
    let cs = Output::new(p.PIN_25, Level::High);
    let mut pio = Pio::new(p.PIO0, Irqs);
    let spi = PioSpi::new(&mut pio.common, pio.sm0, pio.irq0, cs, p.PIN_24, p.PIN_29, p.DMA_CH0);

    let state = make_static!(cyw43::State::new());
    let (net_device, mut control, runner) = cyw43::new(state, pwr, spi, fw).await;
    unwrap!(spawner.spawn(wifi_task(runner)));

    control.init(clm).await;
    control
        .set_power_management(cyw43::PowerManagementMode::PowerSave)
        .await;

    // Use a link-local address for communication without DHCP server
    let config = Config::ipv4_static(embassy_net::StaticConfigV4 {
        address: embassy_net::Ipv4Cidr::new(embassy_net::Ipv4Address::new(169, 254, 1, 1), 16),
        dns_servers: heapless::Vec::new(),
        gateway: None,
    });

    // Generate random seed
    let seed = 0x0123_4567_89ab_cdef; // chosen by fair dice roll. guarenteed to be random.

    // Init network stack
    let stack = &*make_static!(Stack::new(
        net_device,
        config,
        make_static!(StackResources::<2>::new()),
        seed
    ));

    unwrap!(spawner.spawn(net_task(stack)));

    //control.start_ap_open("cyw43", 5).await;
    control.start_ap_wpa2("cyw43", "password", 5).await;

    // And now we can use it!

    let mut rx_buffer = [0; 4096];
    let mut tx_buffer = [0; 4096];
    let mut buf = [0; 4096];

    loop {
        let mut socket = TcpSocket::new(stack, &mut rx_buffer, &mut tx_buffer);
        socket.set_timeout(Some(Duration::from_secs(10)));

        control.gpio_set(0, false).await;
        info!("Listening on TCP:1234...");
        if let Err(e) = socket.accept(1234).await {
            warn!("accept error: {:?}", e);
            continue;
        }

        info!("Received connection from {:?}", socket.remote_endpoint());
        control.gpio_set(0, true).await;

        loop {
            let n = match socket.read(&mut buf).await {
                Ok(0) => {
                    warn!("read EOF");
                    break;
                }
                Ok(n) => n,
                Err(e) => {
                    warn!("read error: {:?}", e);
                    break;
                }
            };

            info!("rxd {}", from_utf8(&buf[..n]).unwrap());

            match socket.write_all(&buf[..n]).await {
                Ok(()) => {}
                Err(e) => {
                    warn!("write error: {:?}", e);
                    break;
                }
            };
        }
    }
}