embassy/examples/stm32wb/src/bin/tl_mbox_mac.rs

#![no_std]
#![no_main]
#![feature(type_alias_impl_trait)]

use defmt::*;
use embassy_executor::Spawner;
use embassy_stm32::bind_interrupts;
use embassy_stm32::ipcc::{Config, ReceiveInterruptHandler, TransmitInterruptHandler};
use embassy_stm32_wpan::sub::mm;
use embassy_stm32_wpan::TlMbox;
use {defmt_rtt as _, panic_probe as _};

bind_interrupts!(struct Irqs{
    IPCC_C1_RX => ReceiveInterruptHandler;
    IPCC_C1_TX => TransmitInterruptHandler;
});

#[embassy_executor::task]
async fn run_mm_queue(memory_manager: mm::MemoryManager) {
    memory_manager.run_queue().await;
}

#[embassy_executor::main]
async fn main(spawner: Spawner) {
    /*
        How to make this work:

        - Obtain a NUCLEO-STM32WB55 from your preferred supplier.
        - Download and Install STM32CubeProgrammer.
        - Download stm32wb5x_FUS_fw.bin, stm32wb5x_BLE_Stack_full_fw.bin, and Release_Notes.html from
          gh:STMicroelectronics/STM32CubeWB@2234d97/Projects/STM32WB_Copro_Wireless_Binaries/STM32WB5x
        - Open STM32CubeProgrammer
        - On the right-hand pane, click "firmware upgrade" to upgrade the st-link firmware.
        - Once complete, click connect to connect to the device.
        - On the left hand pane, click the RSS signal icon to open "Firmware Upgrade Services".
        - In the Release_Notes.html, find the memory address that corresponds to your device for the stm32wb5x_FUS_fw.bin file
        - Select that file, the memory address, "verify download", and then "Firmware Upgrade".
        - Once complete, in the Release_Notes.html, find the memory address that corresponds to your device for the
          stm32wb5x_BLE_Stack_full_fw.bin file. It should not be the same memory address.
        - Select that file, the memory address, "verify download", and then "Firmware Upgrade".
        - Select "Start Wireless Stack".
        - Disconnect from the device.
        - In the examples folder for stm32wb, modify the memory.x file to match your target device.
        - Run this example.

        Note: extended stack versions are not supported at this time. Do not attempt to install a stack with "extended" in the name.
    */

    let p = embassy_stm32::init(Default::default());
    info!("Hello World!");

    let config = Config::default();
    let mbox = TlMbox::init(p.IPCC, Irqs, config);

    spawner.spawn(run_mm_queue(mbox.mm_subsystem)).unwrap();

    let sys_event = mbox.sys_subsystem.read().await;
    info!("sys event: {}", sys_event.payload());

    core::mem::drop(sys_event);

    let result = mbox.sys_subsystem.shci_c2_mac_802_15_4_init().await;
    info!("initialized mac: {}", result);

    //
    //    info!("starting ble...");
    //    mbox.ble_subsystem.t_write(0x0c, &[]).await;
    //
    //    info!("waiting for ble...");
    //    let ble_event = mbox.ble_subsystem.tl_read().await;
    //
    //    info!("ble event: {}", ble_event.payload());

    info!("Test OK");
    cortex_m::asm::bkpt();
}