embassy/examples/stm32wl/src/bin/subghz.rs

131 lines
4.2 KiB
Rust
Raw Normal View History

#![no_std]
#![no_main]
#![macro_use]
#![allow(dead_code)]
#![feature(generic_associated_types)]
#![feature(type_alias_impl_trait)]
use defmt_rtt as _; // global logger
use panic_probe as _;
use defmt::*;
use embassy::channel::signal::Signal;
use embassy::interrupt::{Interrupt, InterruptExt};
use embassy_stm32::dma::NoDma;
use embassy_stm32::exti::ExtiInput;
use embassy_stm32::gpio::{Input, Level, Output, Pull, Speed};
use embassy_stm32::interrupt;
use embassy_stm32::subghz::*;
use embassy_stm32::Peripherals;
const PING_DATA: &str = "PING";
const DATA_LEN: u8 = PING_DATA.len() as u8;
const PING_DATA_BYTES: &[u8] = PING_DATA.as_bytes();
const PREAMBLE_LEN: u16 = 5 * 8;
const RF_FREQ: RfFreq = RfFreq::from_frequency(867_500_000);
const SYNC_WORD: [u8; 8] = [0x79, 0x80, 0x0C, 0xC0, 0x29, 0x95, 0xF8, 0x4A];
const SYNC_WORD_LEN: u8 = SYNC_WORD.len() as u8;
const SYNC_WORD_LEN_BITS: u8 = SYNC_WORD_LEN * 8;
const TX_BUF_OFFSET: u8 = 128;
const RX_BUF_OFFSET: u8 = 0;
const LORA_PACKET_PARAMS: LoRaPacketParams = LoRaPacketParams::new()
.set_crc_en(true)
.set_preamble_len(PREAMBLE_LEN)
.set_payload_len(DATA_LEN)
.set_invert_iq(false)
.set_header_type(HeaderType::Fixed);
const LORA_MOD_PARAMS: LoRaModParams = LoRaModParams::new()
.set_bw(LoRaBandwidth::Bw125)
.set_cr(CodingRate::Cr45)
.set_ldro_en(true)
.set_sf(SpreadingFactor::Sf7);
// configuration for +10 dBm output power
// see table 35 "PA optimal setting and operating modes"
const PA_CONFIG: PaConfig = PaConfig::new()
.set_pa_duty_cycle(0x1)
.set_hp_max(0x0)
.set_pa(PaSel::Lp);
const TCXO_MODE: TcxoMode = TcxoMode::new()
.set_txco_trim(TcxoTrim::Volts1pt7)
.set_timeout(Timeout::from_duration_sat(
core::time::Duration::from_millis(10),
));
const TX_PARAMS: TxParams = TxParams::new()
.set_power(0x0D)
.set_ramp_time(RampTime::Micros40);
fn config() -> embassy_stm32::Config {
let mut config = embassy_stm32::Config::default();
config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSE32;
config
}
#[embassy::main(config = "config()")]
async fn main(_spawner: embassy::executor::Spawner, p: Peripherals) {
let mut led1 = Output::new(p.PB15, Level::High, Speed::Low);
let mut led2 = Output::new(p.PB9, Level::Low, Speed::Low);
let mut led3 = Output::new(p.PB11, Level::Low, Speed::Low);
let button = Input::new(p.PA0, Pull::Up);
let mut pin = ExtiInput::new(button, p.EXTI0);
static IRQ_SIGNAL: Signal<()> = Signal::new();
let radio_irq = interrupt::take!(SUBGHZ_RADIO);
radio_irq.set_handler(|_| {
IRQ_SIGNAL.signal(());
unsafe { interrupt::SUBGHZ_RADIO::steal() }.disable();
});
let mut radio = SubGhz::new(p.SUBGHZSPI, p.PA5, p.PA7, p.PA6, NoDma, NoDma);
defmt::info!("Radio ready for use");
led1.set_low();
led2.set_high();
unwrap!(radio.set_standby(StandbyClk::Rc));
unwrap!(radio.set_tcxo_mode(&TCXO_MODE));
unwrap!(radio.set_standby(StandbyClk::Hse));
unwrap!(radio.set_regulator_mode(RegMode::Ldo));
unwrap!(radio.set_buffer_base_address(TX_BUF_OFFSET, RX_BUF_OFFSET));
unwrap!(radio.set_pa_config(&PA_CONFIG));
unwrap!(radio.set_pa_ocp(Ocp::Max60m));
unwrap!(radio.set_tx_params(&TX_PARAMS));
unwrap!(radio.set_packet_type(PacketType::LoRa));
unwrap!(radio.set_lora_sync_word(LoRaSyncWord::Public));
unwrap!(radio.set_lora_mod_params(&LORA_MOD_PARAMS));
unwrap!(radio.set_lora_packet_params(&LORA_PACKET_PARAMS));
unwrap!(radio.calibrate_image(CalibrateImage::ISM_863_870));
unwrap!(radio.set_rf_frequency(&RF_FREQ));
defmt::info!("Status: {:?}", unwrap!(radio.status()));
led2.set_low();
loop {
pin.wait_for_rising_edge().await;
led3.set_high();
unwrap!(radio.set_irq_cfg(&CfgIrq::new().irq_enable_all(Irq::TxDone)));
unwrap!(radio.write_buffer(TX_BUF_OFFSET, PING_DATA_BYTES));
unwrap!(radio.set_tx(Timeout::DISABLED));
radio_irq.enable();
IRQ_SIGNAL.wait().await;
let (_, irq_status) = unwrap!(radio.irq_status());
if irq_status & Irq::TxDone.mask() != 0 {
defmt::info!("TX done");
}
unwrap!(radio.clear_irq_status(irq_status));
led3.set_low();
}
}