stm32: consolidate crates

embassy-stm32-examples/src/bin/can.rs

@@ -0,0 +1,57 @@
+#![no_std]
+#![no_main]
+#![feature(trait_alias)]
+#![feature(type_alias_impl_trait)]
+#![feature(min_type_alias_impl_trait)]
+#![feature(impl_trait_in_bindings)]
+
+#[path = "../example_common.rs"]
+mod example_common;
+use example_common::{panic, *};
+
+use bxcan::filter::Mask32;
+use cortex_m_rt::entry;
+use embassy::executor::Executor;
+use embassy::util::Forever;
+use embassy_stm32::{can, interrupt};
+use stm32f4xx_hal::prelude::*;
+use stm32f4xx_hal::{can::Can, stm32};
+
+#[embassy::task]
+async fn run(dp: stm32::Peripherals, _cp: cortex_m::Peripherals) {
+    let gpioa = dp.GPIOA.split();
+
+    let rx = gpioa.pa11.into_alternate_af9();
+    let tx = gpioa.pa12.into_alternate_af9();
+    let mut can = bxcan::Can::new(Can::new(dp.CAN1, (tx, rx)));
+
+    // APB1 (PCLK1): 24MHz, Bit rate: 20kBit/s, Sample Point 87.5%
+    // Value was calculated with http://www.bittiming.can-wiki.info/
+    can.modify_config().set_bit_timing(0x001c_004a);
+    // Configure filters so that can frames can be received.
+    can.modify_filters().enable_bank(0, Mask32::accept_all());
+
+    let mut can = can::Can::new(can, interrupt::take!(CAN1_TX), interrupt::take!(CAN1_RX0));
+
+    let _frame = can.receive().await;
+}
+
+static EXECUTOR: Forever<Executor> = Forever::new();
+
+#[entry]
+fn main() -> ! {
+    let dp = stm32::Peripherals::take().unwrap();
+    let cp = cortex_m::peripheral::Peripherals::take().unwrap();
+
+    dp.DBGMCU.cr.modify(|_, w| {
+        w.dbg_sleep().set_bit();
+        w.dbg_standby().set_bit();
+        w.dbg_stop().set_bit()
+    });
+    dp.RCC.ahb1enr.modify(|_, w| w.dma1en().enabled());
+
+    let executor = EXECUTOR.put(Executor::new());
+    executor.run(|spawner| {
+        unwrap!(spawner.spawn(run(dp, cp)));
+    });
+}

embassy-stm32-examples/src/bin/exti.rs

@@ -0,0 +1,58 @@
+#![no_std]
+#![no_main]
+#![feature(trait_alias)]
+#![feature(min_type_alias_impl_trait)]
+#![feature(impl_trait_in_bindings)]
+#![feature(type_alias_impl_trait)]
+
+#[path = "../example_common.rs"]
+mod example_common;
+use example_common::{panic, *};
+
+use cortex_m_rt::entry;
+use embassy::executor::Executor;
+use embassy::traits::gpio::*;
+use embassy::util::Forever;
+use embassy_stm32::exti::ExtiPin;
+use embassy_stm32::interrupt;
+use futures::pin_mut;
+use stm32f4xx_hal::prelude::*;
+use stm32f4xx_hal::stm32;
+
+#[embassy::task]
+async fn run(dp: stm32::Peripherals, _cp: cortex_m::Peripherals) {
+    let gpioa = dp.GPIOA.split();
+
+    let button = gpioa.pa0.into_pull_up_input();
+    let mut syscfg = dp.SYSCFG.constrain();
+
+    let pin = ExtiPin::new(button, interrupt::take!(EXTI0), &mut syscfg);
+    pin_mut!(pin);
+
+    info!("Starting loop");
+
+    loop {
+        pin.as_mut().wait_for_rising_edge().await;
+        info!("edge detected!");
+    }
+}
+
+static EXECUTOR: Forever<Executor> = Forever::new();
+
+#[entry]
+fn main() -> ! {
+    let dp = stm32::Peripherals::take().unwrap();
+    let cp = cortex_m::peripheral::Peripherals::take().unwrap();
+
+    dp.DBGMCU.cr.modify(|_, w| {
+        w.dbg_sleep().set_bit();
+        w.dbg_standby().set_bit();
+        w.dbg_stop().set_bit()
+    });
+    dp.RCC.ahb1enr.modify(|_, w| w.dma1en().enabled());
+
+    let executor = EXECUTOR.put(Executor::new());
+    executor.run(|spawner| {
+        unwrap!(spawner.spawn(run(dp, cp)));
+    });
+}

embassy-stm32-examples/src/bin/hello.rs

@@ -0,0 +1,42 @@
+#![no_std]
+#![no_main]
+#![feature(trait_alias)]
+#![feature(min_type_alias_impl_trait)]
+#![feature(impl_trait_in_bindings)]
+#![feature(type_alias_impl_trait)]
+
+#[path = "../example_common.rs"]
+mod example_common;
+use example_common::*;
+
+use cortex_m_rt::entry;
+use stm32f4xx_hal::prelude::*;
+
+#[entry]
+fn main() -> ! {
+    info!("Hello World!");
+
+    let p = stm32f4xx_hal::stm32::Peripherals::take().unwrap();
+
+    p.DBGMCU.cr.modify(|_, w| {
+        w.dbg_sleep().set_bit();
+        w.dbg_standby().set_bit();
+        w.dbg_stop().set_bit()
+    });
+    p.RCC.ahb1enr.modify(|_, w| w.dma1en().enabled());
+
+    let gpioa = p.GPIOA.split();
+    let gpioc = p.GPIOC.split();
+
+    let mut led = gpioc.pc13.into_push_pull_output();
+    let button = gpioa.pa0.into_pull_up_input();
+    led.set_low().unwrap();
+
+    loop {
+        if button.is_high().unwrap() {
+            led.set_low().unwrap();
+        } else {
+            led.set_high().unwrap();
+        }
+    }
+}

embassy-stm32-examples/src/bin/rtc_async.rs

@@ -0,0 +1,39 @@
+#![no_std]
+#![no_main]
+#![feature(min_type_alias_impl_trait)]
+#![feature(impl_trait_in_bindings)]
+#![feature(type_alias_impl_trait)]
+
+#[path = "../example_common.rs"]
+mod example_common;
+use example_common::*;
+
+use defmt::panic;
+use embassy;
+use embassy::executor::Spawner;
+use embassy::time::{Duration, Timer};
+use embassy_stm32;
+use embassy_stm32::hal;
+
+#[embassy::task]
+async fn run1() {
+    loop {
+        info!("BIG INFREQUENT TICK");
+        Timer::after(Duration::from_ticks(32768 * 2 as u64)).await;
+    }
+}
+
+#[embassy::task]
+async fn run2() {
+    loop {
+        info!("tick");
+        Timer::after(Duration::from_ticks(13000 as u64)).await;
+    }
+}
+
+#[embassy::main(use_hse = 16)]
+async fn main(spawner: Spawner) {
+    let (dp, clocks) = embassy_stm32::Peripherals::take().unwrap();
+
+    spawner.spawn(run1()).unwrap();
+}

embassy-stm32-examples/src/bin/serial.rs

@@ -0,0 +1,79 @@
+#![no_std]
+#![no_main]
+#![feature(trait_alias)]
+#![feature(min_type_alias_impl_trait)]
+#![feature(impl_trait_in_bindings)]
+#![feature(type_alias_impl_trait)]
+
+#[path = "../example_common.rs"]
+mod example_common;
+use example_common::{panic, *};
+
+use cortex_m::singleton;
+use cortex_m_rt::entry;
+use embassy::executor::{Executor, Spawner};
+use embassy::traits::uart::{Read, Write};
+use embassy::util::Forever;
+use embassy_stm32::interrupt;
+use embassy_stm32::serial;
+use futures::pin_mut;
+use stm32f4xx_hal::dma::StreamsTuple;
+use stm32f4xx_hal::prelude::*;
+use stm32f4xx_hal::serial::config::Config;
+use stm32f4xx_hal::stm32;
+
+#[embassy::main(use_hse = 16, sysclk = 48, pclk1 = 24)]
+async fn main(spawner: Spawner) {
+    let (dp, clocks) = embassy_stm32::Peripherals::take().unwrap();
+    let cp = cortex_m::peripheral::Peripherals::take().unwrap();
+
+    dp.DBGMCU.cr.modify(|_, w| {
+        w.dbg_sleep().set_bit();
+        w.dbg_standby().set_bit();
+        w.dbg_stop().set_bit()
+    });
+
+    // https://gist.github.com/thalesfragoso/a07340c5df6eee3b04c42fdc69ecdcb1
+    let gpioa = dp.GPIOA.split();
+    let streams = StreamsTuple::new(dp.DMA2);
+
+    let _serial = unsafe {
+        serial::Serial::new(
+            dp.USART1,
+            (streams.7, streams.2),
+            (
+                gpioa.pa9.into_alternate_af7(),
+                gpioa.pa10.into_alternate_af7(),
+            ),
+            interrupt::take!(DMA2_STREAM7),
+            interrupt::take!(DMA2_STREAM2),
+            interrupt::take!(USART1),
+            Config::default().baudrate(9600.bps()),
+            clocks,
+        )
+    };
+
+    let streams = StreamsTuple::new(dp.DMA1);
+
+    let mut serial = unsafe {
+        serial::Serial::new(
+            dp.USART2,
+            (streams.6, streams.5),
+            (
+                gpioa.pa2.into_alternate_af7(),
+                gpioa.pa3.into_alternate_af7(),
+            ),
+            interrupt::take!(DMA1_STREAM6),
+            interrupt::take!(DMA1_STREAM5),
+            interrupt::take!(USART2),
+            Config::default().baudrate(9600.bps()),
+            clocks,
+        )
+    };
+    pin_mut!(serial);
+
+    let buf = singleton!(: [u8; 30] = [0; 30]).unwrap();
+
+    buf[5] = 0x01;
+    serial.write(buf).await.unwrap();
+}

embassy-stm32-examples/src/bin/usb_serial.rs

@@ -0,0 +1,117 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+#![feature(min_type_alias_impl_trait)]
+#![feature(impl_trait_in_bindings)]
+
+#[path = "../example_common.rs"]
+mod example_common;
+use example_common::*;
+
+use cortex_m_rt::entry;
+use defmt::panic;
+use embassy::executor::{Executor, Spawner};
+use embassy::interrupt::InterruptExt;
+use embassy::io::{AsyncBufReadExt, AsyncWriteExt};
+use embassy::time::{Duration, Timer};
+use embassy::util::Forever;
+use embassy_extras::usb::usb_serial::UsbSerial;
+use embassy_extras::usb::Usb;
+use embassy_stm32::{interrupt, pac, rtc};
+use futures::future::{select, Either};
+use futures::pin_mut;
+use stm32f4xx_hal::otg_fs::{UsbBus, USB};
+use stm32f4xx_hal::prelude::*;
+use usb_device::bus::UsbBusAllocator;
+use usb_device::prelude::*;
+
+#[embassy::task]
+async fn run1(bus: &'static mut UsbBusAllocator<UsbBus<USB>>) {
+    info!("Async task");
+
+    let mut read_buf = [0u8; 128];
+    let mut write_buf = [0u8; 128];
+    let serial = UsbSerial::new(bus, &mut read_buf, &mut write_buf);
+
+    let device = UsbDeviceBuilder::new(bus, UsbVidPid(0x16c0, 0x27dd))
+        .manufacturer("Fake company")
+        .product("Serial port")
+        .serial_number("TEST")
+        .device_class(0x02)
+        .build();
+
+    let irq = interrupt::take!(OTG_FS);
+    irq.set_priority(interrupt::Priority::Level3);
+
+    let usb = Usb::new(device, serial, irq);
+    pin_mut!(usb);
+    usb.as_mut().start();
+
+    let (mut read_interface, mut write_interface) = usb.as_ref().take_serial_0();
+
+    let mut buf = [0u8; 64];
+    loop {
+        let mut n = 0;
+        let left = {
+            let recv_fut = async {
+                loop {
+                    let byte = unwrap!(read_interface.read_byte().await);
+                    unwrap!(write_interface.write_byte(byte).await);
+                    buf[n] = byte;
+
+                    n += 1;
+                    if byte == b'\n' || byte == b'\r' || n == buf.len() {
+                        break;
+                    }
+                }
+            };
+            pin_mut!(recv_fut);
+
+            let timeout = Timer::after(Duration::from_ticks(32768 * 10));
+
+            match select(recv_fut, timeout).await {
+                Either::Left(_) => true,
+                Either::Right(_) => false,
+            }
+        };
+
+        if left {
+            for c in buf[..n].iter_mut() {
+                if 0x61 <= *c && *c <= 0x7a {
+                    *c &= !0x20;
+                }
+            }
+            unwrap!(write_interface.write_byte(b'\n').await);
+            unwrap!(write_interface.write_all(&buf[..n]).await);
+            unwrap!(write_interface.write_byte(b'\n').await);
+        } else {
+            unwrap!(write_interface.write_all(b"\r\nSend something\r\n").await);
+        }
+    }
+}
+
+static USB_BUS: Forever<UsbBusAllocator<UsbBus<USB>>> = Forever::new();
+
+#[embassy::main(use_hse = 25, sysclk = 48, require_pll48clk)]
+async fn main(spawner: Spawner) -> ! {
+    static mut EP_MEMORY: [u32; 1024] = [0; 1024];
+
+    info!("Hello World!");
+
+    let (p, clocks) = embassy_stm32::Peripherals::take().unwrap();
+
+    let gpioa = p.GPIOA.split();
+    let usb = USB {
+        usb_global: p.OTG_FS_GLOBAL,
+        usb_device: p.OTG_FS_DEVICE,
+        usb_pwrclk: p.OTG_FS_PWRCLK,
+        pin_dm: gpioa.pa11.into_alternate_af10(),
+        pin_dp: gpioa.pa12.into_alternate_af10(),
+        hclk: clocks.hclk(),
+    };
+    // Rust analyzer isn't recognizing the static ref magic `cortex-m` does
+    #[allow(unused_unsafe)]
+    let usb_bus = USB_BUS.put(UsbBus::new(usb, unsafe { &mut EP_MEMORY }));
+
+    spawner.spawn(run1(usb_bus)).unwrap();
+}

embassy-stm32-examples/src/example_common.rs

@@ -0,0 +1,17 @@
+#![macro_use]
+
+use defmt_rtt as _; // global logger
+use panic_probe as _;
+
+pub use defmt::*;
+
+use core::sync::atomic::{AtomicUsize, Ordering};
+
+defmt::timestamp! {"{=u64}", {
+        static COUNT: AtomicUsize = AtomicUsize::new(0);
+        // NOTE(no-CAS) `timestamps` runs with interrupts disabled
+        let n = COUNT.load(Ordering::Relaxed);
+        COUNT.store(n + 1, Ordering::Relaxed);
+        n as u64
+    }
+}