Add example for using CAN with STM32F103 (BluePill) with a real CAN

examples/stm32f1/src/bin/can.rs

@@ -0,0 +1,79 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::bind_interrupts;
+use embassy_stm32::can::bxcan::filter::Mask32;
+use embassy_stm32::can::bxcan::{Fifo, Frame, StandardId, Id};
+use embassy_stm32::can::{Can, Rx0InterruptHandler, Rx1InterruptHandler, SceInterruptHandler, TxInterruptHandler};
+use embassy_stm32::Config;
+
+use embassy_stm32::peripherals::CAN;
+use {defmt_rtt as _, panic_probe as _};
+
+bind_interrupts!(struct Irqs {
+    USB_LP_CAN1_RX0 => Rx0InterruptHandler<CAN>;
+    CAN1_RX1 => Rx1InterruptHandler<CAN>;
+    CAN1_SCE => SceInterruptHandler<CAN>;
+    USB_HP_CAN1_TX => TxInterruptHandler<CAN>;
+});
+
+// This example is configured to work with real CAN transceivers on B8/B9.
+// See other examples for loopback.
+
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+
+    let p = embassy_stm32::init(Config::default());
+
+    // Set alternate pin mapping to B8/B9
+    embassy_stm32::pac::AFIO.mapr().modify(|w| w.set_can1_remap(2));
+
+    let mut can = Can::new(p.CAN, p.PB8, p.PB9, Irqs);
+
+
+    can.as_mut()
+        .modify_filters()
+        .enable_bank(0, Fifo::Fifo0, Mask32::accept_all());
+
+    can.as_mut()
+        .modify_config()
+        .set_loopback(false)
+        .set_silent(false)
+        .leave_disabled();
+        
+
+    can.set_bitrate(250_000);
+
+    can.enable().await;
+
+
+    let mut i: u8 = 0;
+    loop {
+        let tx_frame = Frame::new_data(unwrap!(StandardId::new(i as _)), [i]);
+        can.write(&tx_frame).await;
+
+        match can.read().await {
+            Ok(env) => {
+
+                match env.frame.id() {
+                    Id::Extended(id) => {
+                        defmt::println!("Extended Frame id={:x}", id.as_raw());
+                    },
+                    Id::Standard(id) => {
+                        defmt::println!("Standard Frame id={:x}", id.as_raw());
+                    },
+                }
+
+            },
+            Err(err) => {
+                defmt::println!("Error {}", err);
+
+            }
+        }
+        i += 1;
+    }
+}