Apply Pedantic Clippy Lints

This commit is contained in:
Rafael Bachmann 2023-10-15 23:45:44 +02:00
parent 66e62e9994
commit 31d4516516
12 changed files with 123 additions and 143 deletions

View File

@ -70,9 +70,11 @@ fn main() {
// envvars take priority.
if !cfg.seen_env {
if cfg.seen_feature {
panic!("multiple values set for feature {}: {} and {}", name, cfg.value, value);
}
assert!(
!cfg.seen_feature,
"multiple values set for feature {}: {} and {}",
name, cfg.value, value
);
cfg.value = value;
cfg.seen_feature = true;

View File

@ -1,17 +1,17 @@
use heapless::Vec;
use crate::config::*;
use crate::config::MAX_HANDLER_COUNT;
use crate::descriptor::{BosWriter, DescriptorWriter};
use crate::driver::{Driver, Endpoint, EndpointType};
#[cfg(feature = "msos-descriptor")]
use crate::msos::{DeviceLevelDescriptor, FunctionLevelDescriptor, MsOsDescriptorWriter};
use crate::types::*;
use crate::types::{InterfaceNumber, StringIndex};
use crate::{Handler, Interface, UsbDevice, MAX_INTERFACE_COUNT, STRING_INDEX_CUSTOM_START};
#[derive(Debug, Copy, Clone)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[non_exhaustive]
/// Configuration used when creating [UsbDevice].
/// Configuration used when creating [`UsbDevice`].
pub struct Config<'a> {
pub(crate) vendor_id: u16,
pub(crate) product_id: u16,
@ -159,9 +159,10 @@ impl<'d, D: Driver<'d>> Builder<'d, D> {
panic!("if composite_with_iads is set, you must set device_class = 0xEF, device_sub_class = 0x02, device_protocol = 0x01");
}
if config.max_power > 500 {
panic!("The maximum allowed value for `max_power` is 500mA");
}
assert!(
config.max_power <= 500,
"The maximum allowed value for `max_power` is 500mA"
);
match config.max_packet_size_0 {
8 | 16 | 32 | 64 => {}
@ -260,12 +261,11 @@ impl<'d, D: Driver<'d>> Builder<'d, D> {
/// The Handler is called on some USB bus events, and to handle all control requests not already
/// handled by the USB stack.
pub fn handler(&mut self, handler: &'d mut dyn Handler) {
if self.handlers.push(handler).is_err() {
panic!(
assert!(
self.handlers.push(handler).is_ok(),
"embassy-usb: handler list full. Increase the `max_handler_count` compile-time setting. Current value: {}",
MAX_HANDLER_COUNT
)
}
);
}
/// Allocates a new string index.
@ -332,12 +332,10 @@ impl<'a, 'd, D: Driver<'d>> FunctionBuilder<'a, 'd, D> {
num_alt_settings: 0,
};
if self.builder.interfaces.push(iface).is_err() {
panic!(
assert!(self.builder.interfaces.push(iface).is_ok(),
"embassy-usb: interface list full. Increase the `max_interface_count` compile-time setting. Current value: {}",
MAX_INTERFACE_COUNT
)
}
);
InterfaceBuilder {
builder: self.builder,
@ -371,7 +369,7 @@ pub struct InterfaceBuilder<'a, 'd, D: Driver<'d>> {
impl<'a, 'd, D: Driver<'d>> InterfaceBuilder<'a, 'd, D> {
/// Get the interface number.
pub fn interface_number(&self) -> InterfaceNumber {
pub const fn interface_number(&self) -> InterfaceNumber {
self.interface_number
}
@ -422,12 +420,12 @@ pub struct InterfaceAltBuilder<'a, 'd, D: Driver<'d>> {
impl<'a, 'd, D: Driver<'d>> InterfaceAltBuilder<'a, 'd, D> {
/// Get the interface number.
pub fn interface_number(&self) -> InterfaceNumber {
pub const fn interface_number(&self) -> InterfaceNumber {
self.interface_number
}
/// Get the alternate setting number.
pub fn alt_setting_number(&self) -> u8 {
pub const fn alt_setting_number(&self) -> u8 {
self.alt_setting_number
}
@ -436,7 +434,7 @@ impl<'a, 'd, D: Driver<'d>> InterfaceAltBuilder<'a, 'd, D> {
/// Descriptors are written in the order builder functions are called. Note that some
/// classes care about the order.
pub fn descriptor(&mut self, descriptor_type: u8, descriptor: &[u8]) {
self.builder.config_descriptor.write(descriptor_type, descriptor)
self.builder.config_descriptor.write(descriptor_type, descriptor);
}
fn endpoint_in(&mut self, ep_type: EndpointType, max_packet_size: u16, interval_ms: u8) -> D::EndpointIn {

View File

@ -11,7 +11,7 @@ use embassy_sync::waitqueue::WakerRegistration;
use crate::control::{self, InResponse, OutResponse, Recipient, Request, RequestType};
use crate::driver::{Driver, Endpoint, EndpointError, EndpointIn, EndpointOut};
use crate::types::*;
use crate::types::InterfaceNumber;
use crate::{Builder, Handler};
/// This should be used as `device_class` when building the `UsbDevice`.
@ -50,7 +50,7 @@ impl<'a> State<'a> {
pub fn new() -> Self {
Self {
control: MaybeUninit::uninit(),
shared: Default::default(),
shared: ControlShared::default(),
}
}
}
@ -61,9 +61,9 @@ impl<'a> State<'a> {
/// writing USB packets with no intermediate buffers, but it will not act like a stream-like serial
/// port. The following constraints must be followed if you use this class directly:
///
/// - `read_packet` must be called with a buffer large enough to hold max_packet_size bytes.
/// - `write_packet` must not be called with a buffer larger than max_packet_size bytes.
/// - If you write a packet that is exactly max_packet_size bytes long, it won't be processed by the
/// - `read_packet` must be called with a buffer large enough to hold `max_packet_size` bytes.
/// - `write_packet` must not be called with a buffer larger than `max_packet_size` bytes.
/// - If you write a packet that is exactly `max_packet_size` bytes long, it won't be processed by the
/// host operating system until a subsequent shorter packet is sent. A zero-length packet (ZLP)
/// can be sent if there is no other data to send. This is because USB bulk transactions must be
/// terminated with a short packet, even if the bulk endpoint is used for stream-like data.
@ -109,17 +109,16 @@ impl Default for ControlShared {
impl ControlShared {
async fn changed(&self) {
poll_fn(|cx| match self.changed.load(Ordering::Relaxed) {
true => {
poll_fn(|cx| {
if self.changed.load(Ordering::Relaxed) {
self.changed.store(false, Ordering::Relaxed);
Poll::Ready(())
}
false => {
} else {
self.waker.borrow_mut().register(cx.waker());
Poll::Pending
}
})
.await
.await;
}
}
@ -198,7 +197,7 @@ impl<'d> Handler for Control<'d> {
// REQ_GET_ENCAPSULATED_COMMAND is not really supported - it will be rejected below.
REQ_GET_LINE_CODING if req.length == 7 => {
debug!("Sending line coding");
let coding = self.shared().line_coding.lock(|x| x.get());
let coding = self.shared().line_coding.lock(Cell::get);
assert!(buf.len() >= 7);
buf[0..4].copy_from_slice(&coding.data_rate.to_le_bytes());
buf[4] = coding.stop_bits as u8;
@ -212,8 +211,8 @@ impl<'d> Handler for Control<'d> {
}
impl<'d, D: Driver<'d>> CdcAcmClass<'d, D> {
/// Creates a new CdcAcmClass with the provided UsbBus and max_packet_size in bytes. For
/// full-speed devices, max_packet_size has to be one of 8, 16, 32 or 64.
/// Creates a new CdcAcmClass with the provided UsbBus and `max_packet_size` in bytes. For
/// full-speed devices, `max_packet_size` has to be one of 8, 16, 32 or 64.
pub fn new(builder: &mut Builder<'d, D>, state: &'d mut State<'d>, max_packet_size: u16) -> Self {
assert!(builder.control_buf_len() >= 7);
@ -289,7 +288,7 @@ impl<'d, D: Driver<'d>> CdcAcmClass<'d, D> {
/// Gets the current line coding. The line coding contains information that's mainly relevant
/// for USB to UART serial port emulators, and can be ignored if not relevant.
pub fn line_coding(&self) -> LineCoding {
self.control.line_coding.lock(|x| x.get())
self.control.line_coding.lock(Cell::get)
}
/// Gets the DTR (data terminal ready) state
@ -314,7 +313,7 @@ impl<'d, D: Driver<'d>> CdcAcmClass<'d, D> {
/// Waits for the USB host to enable this interface
pub async fn wait_connection(&mut self) {
self.read_ep.wait_enabled().await
self.read_ep.wait_enabled().await;
}
/// Split the class into a sender and receiver.
@ -362,7 +361,7 @@ pub struct ControlChanged<'d> {
impl<'d> ControlChanged<'d> {
/// Return a future for when the control settings change
pub async fn control_changed(&self) {
self.control.changed().await
self.control.changed().await;
}
}
@ -384,7 +383,7 @@ impl<'d, D: Driver<'d>> Sender<'d, D> {
/// Gets the current line coding. The line coding contains information that's mainly relevant
/// for USB to UART serial port emulators, and can be ignored if not relevant.
pub fn line_coding(&self) -> LineCoding {
self.control.line_coding.lock(|x| x.get())
self.control.line_coding.lock(Cell::get)
}
/// Gets the DTR (data terminal ready) state
@ -404,7 +403,7 @@ impl<'d, D: Driver<'d>> Sender<'d, D> {
/// Waits for the USB host to enable this interface
pub async fn wait_connection(&mut self) {
self.write_ep.wait_enabled().await
self.write_ep.wait_enabled().await;
}
}
@ -426,7 +425,7 @@ impl<'d, D: Driver<'d>> Receiver<'d, D> {
/// Gets the current line coding. The line coding contains information that's mainly relevant
/// for USB to UART serial port emulators, and can be ignored if not relevant.
pub fn line_coding(&self) -> LineCoding {
self.control.line_coding.lock(|x| x.get())
self.control.line_coding.lock(Cell::get)
}
/// Gets the DTR (data terminal ready) state
@ -446,7 +445,7 @@ impl<'d, D: Driver<'d>> Receiver<'d, D> {
/// Waits for the USB host to enable this interface
pub async fn wait_connection(&mut self) {
self.read_ep.wait_enabled().await
self.read_ep.wait_enabled().await;
}
}
@ -520,17 +519,17 @@ impl LineCoding {
}
/// Gets the number of data bits for UART communication.
pub fn data_bits(&self) -> u8 {
pub const fn data_bits(&self) -> u8 {
self.data_bits
}
/// Gets the parity type for UART communication.
pub fn parity_type(&self) -> ParityType {
pub const fn parity_type(&self) -> ParityType {
self.parity_type
}
/// Gets the data rate in bits per second for UART communication.
pub fn data_rate(&self) -> u32 {
pub const fn data_rate(&self) -> u32 {
self.data_rate
}
}

View File

@ -16,10 +16,11 @@
use core::intrinsics::copy_nonoverlapping;
use core::mem::{size_of, MaybeUninit};
use core::ptr::addr_of;
use crate::control::{self, InResponse, OutResponse, Recipient, Request, RequestType};
use crate::driver::{Driver, Endpoint, EndpointError, EndpointIn, EndpointOut};
use crate::types::*;
use crate::types::{InterfaceNumber, StringIndex};
use crate::{Builder, Handler};
pub mod embassy_net;
@ -62,9 +63,9 @@ const REQ_SET_NTB_INPUT_SIZE: u8 = 0x86;
//const NOTIF_POLL_INTERVAL: u8 = 20;
const NTB_MAX_SIZE: usize = 2048;
const SIG_NTH: u32 = 0x484d434e;
const SIG_NDP_NO_FCS: u32 = 0x304d434e;
const SIG_NDP_WITH_FCS: u32 = 0x314d434e;
const SIG_NTH: u32 = 0x484d_434e;
const SIG_NDP_NO_FCS: u32 = 0x304d_434e;
const SIG_NDP_WITH_FCS: u32 = 0x314d_434e;
const ALTERNATE_SETTING_DISABLED: u8 = 0x00;
const ALTERNATE_SETTING_ENABLED: u8 = 0x01;
@ -111,7 +112,7 @@ struct NtbParametersDir {
fn byteify<T>(buf: &mut [u8], data: T) -> &[u8] {
let len = size_of::<T>();
unsafe { copy_nonoverlapping(&data as *const _ as *const u8, buf.as_mut_ptr(), len) }
unsafe { copy_nonoverlapping(addr_of!(data).cast(), buf.as_mut_ptr(), len) }
&buf[..len]
}
@ -132,12 +133,12 @@ impl<'a> State<'a> {
pub fn new() -> Self {
Self {
control: MaybeUninit::uninit(),
shared: Default::default(),
shared: ControlShared::default(),
}
}
}
/// Shared data between Control and CdcAcmClass
/// Shared data between Control and `CdcAcmClass`
#[derive(Default)]
struct ControlShared {
mac_addr: [u8; 6],
@ -378,12 +379,12 @@ impl<'d, D: Driver<'d>> Sender<'d, D> {
///
/// This waits until the packet is successfully stored in the CDC-NCM endpoint buffers.
pub async fn write_packet(&mut self, data: &[u8]) -> Result<(), EndpointError> {
let seq = self.seq;
self.seq = self.seq.wrapping_add(1);
const OUT_HEADER_LEN: usize = 28;
const ABS_MAX_PACKET_SIZE: usize = 512;
let seq = self.seq;
self.seq = self.seq.wrapping_add(1);
let header = NtbOutHeader {
nth_sig: SIG_NTH,
nth_len: 0x0c,
@ -460,12 +461,9 @@ impl<'d, D: Driver<'d>> Receiver<'d, D> {
let ntb = &ntb[..pos];
// Process NTB header (NTH)
let nth = match ntb.get(..12) {
Some(x) => x,
None => {
let Some(nth) = ntb.get(..12) else {
warn!("Received too short NTB");
continue;
}
};
let sig = u32::from_le_bytes(nth[0..4].try_into().unwrap());
if sig != SIG_NTH {
@ -475,12 +473,9 @@ impl<'d, D: Driver<'d>> Receiver<'d, D> {
let ndp_idx = u16::from_le_bytes(nth[10..12].try_into().unwrap()) as usize;
// Process NTB Datagram Pointer (NDP)
let ndp = match ntb.get(ndp_idx..ndp_idx + 12) {
Some(x) => x,
None => {
let Some(ndp) = ntb.get(ndp_idx..ndp_idx + 12) else {
warn!("NTH has an NDP pointer out of range.");
continue;
}
};
let sig = u32::from_le_bytes(ndp[0..4].try_into().unwrap());
if sig != SIG_NDP_NO_FCS && sig != SIG_NDP_WITH_FCS {
@ -496,12 +491,9 @@ impl<'d, D: Driver<'d>> Receiver<'d, D> {
}
// Process actual datagram, finally.
let datagram = match ntb.get(datagram_index..datagram_index + datagram_len) {
Some(x) => x,
None => {
let Some(datagram) = ntb.get(datagram_index..datagram_index + datagram_len) else {
warn!("NDP has a datagram pointer out of range.");
continue;
}
};
buf[..datagram_len].copy_from_slice(datagram);

View File

@ -63,7 +63,7 @@ pub enum ReportId {
}
impl ReportId {
fn try_from(value: u16) -> Result<Self, ()> {
const fn try_from(value: u16) -> Result<Self, ()> {
match value >> 8 {
1 => Ok(ReportId::In(value as u8)),
2 => Ok(ReportId::Out(value as u8)),
@ -87,7 +87,7 @@ impl<'d> Default for State<'d> {
impl<'d> State<'d> {
/// Create a new `State`.
pub fn new() -> Self {
pub const fn new() -> Self {
State {
control: MaybeUninit::uninit(),
out_report_offset: AtomicUsize::new(0),
@ -154,7 +154,7 @@ fn build<'d, D: Driver<'d>>(
}
impl<'d, D: Driver<'d>, const READ_N: usize, const WRITE_N: usize> HidReaderWriter<'d, D, READ_N, WRITE_N> {
/// Creates a new HidReaderWriter.
/// Creates a new `HidReaderWriter`.
///
/// This will allocate one IN and one OUT endpoints. If you only need writing (sending)
/// HID reports, consider using [`HidWriter::new`] instead, which allocates an IN endpoint only.
@ -230,7 +230,7 @@ pub enum ReadError {
impl From<EndpointError> for ReadError {
fn from(val: EndpointError) -> Self {
use EndpointError::*;
use EndpointError::{BufferOverflow, Disabled};
match val {
BufferOverflow => ReadError::BufferOverflow,
Disabled => ReadError::Disabled,
@ -258,16 +258,15 @@ impl<'d, D: Driver<'d>, const N: usize> HidWriter<'d, D, N> {
/// Waits for the interrupt in endpoint to be enabled.
pub async fn ready(&mut self) {
self.ep_in.wait_enabled().await
self.ep_in.wait_enabled().await;
}
/// Writes an input report by serializing the given report structure.
#[cfg(feature = "usbd-hid")]
pub async fn write_serialize<IR: AsInputReport>(&mut self, r: &IR) -> Result<(), EndpointError> {
let mut buf: [u8; N] = [0; N];
let size = match serialize(&mut buf, r) {
Ok(size) => size,
Err(_) => return Err(EndpointError::BufferOverflow),
let Ok(size) = serialize(&mut buf, r) else {
return Err(EndpointError::BufferOverflow);
};
self.write(&buf[0..size]).await
}
@ -293,7 +292,7 @@ impl<'d, D: Driver<'d>, const N: usize> HidWriter<'d, D, N> {
impl<'d, D: Driver<'d>, const N: usize> HidReader<'d, D, N> {
/// Waits for the interrupt out endpoint to be enabled.
pub async fn ready(&mut self) {
self.ep_out.wait_enabled().await
self.ep_out.wait_enabled().await;
}
/// Delivers output reports from the Interrupt Out pipe to `handler`.
@ -350,9 +349,8 @@ impl<'d, D: Driver<'d>, const N: usize> HidReader<'d, D, N> {
if size < max_packet_size || total == N {
self.offset.store(0, Ordering::Release);
break;
} else {
self.offset.store(total, Ordering::Release);
}
self.offset.store(total, Ordering::Release);
}
Err(err) => {
self.offset.store(0, Ordering::Release);

View File

@ -27,9 +27,9 @@ const MIDI_OUT_SIZE: u8 = 0x09;
/// writing USB packets with no intermediate buffers, but it will not act like a stream-like port.
/// The following constraints must be followed if you use this class directly:
///
/// - `read_packet` must be called with a buffer large enough to hold max_packet_size bytes.
/// - `write_packet` must not be called with a buffer larger than max_packet_size bytes.
/// - If you write a packet that is exactly max_packet_size bytes long, it won't be processed by the
/// - `read_packet` must be called with a buffer large enough to hold `max_packet_size` bytes.
/// - `write_packet` must not be called with a buffer larger than `max_packet_size` bytes.
/// - If you write a packet that is exactly `max_packet_size` bytes long, it won't be processed by the
/// host operating system until a subsequent shorter packet is sent. A zero-length packet (ZLP)
/// can be sent if there is no other data to send. This is because USB bulk transactions must be
/// terminated with a short packet, even if the bulk endpoint is used for stream-like data.
@ -39,8 +39,8 @@ pub struct MidiClass<'d, D: Driver<'d>> {
}
impl<'d, D: Driver<'d>> MidiClass<'d, D> {
/// Creates a new MidiClass with the provided UsbBus, number of input and output jacks and max_packet_size in bytes.
/// For full-speed devices, max_packet_size has to be one of 8, 16, 32 or 64.
/// Creates a new `MidiClass` with the provided UsbBus, number of input and output jacks and `max_packet_size` in bytes.
/// For full-speed devices, `max_packet_size` has to be one of 8, 16, 32 or 64.
pub fn new(builder: &mut Builder<'d, D>, n_in_jacks: u8, n_out_jacks: u8, max_packet_size: u16) -> Self {
let mut func = builder.function(USB_AUDIO_CLASS, USB_AUDIOCONTROL_SUBCLASS, PROTOCOL_NONE);
@ -160,7 +160,7 @@ impl<'d, D: Driver<'d>> MidiClass<'d, D> {
/// Waits for the USB host to enable this interface
pub async fn wait_connection(&mut self) {
self.read_ep.wait_enabled().await
self.read_ep.wait_enabled().await;
}
/// Split the class into a sender and receiver.
@ -197,7 +197,7 @@ impl<'d, D: Driver<'d>> Sender<'d, D> {
/// Waits for the USB host to enable this interface
pub async fn wait_connection(&mut self) {
self.write_ep.wait_enabled().await
self.write_ep.wait_enabled().await;
}
}
@ -222,6 +222,6 @@ impl<'d, D: Driver<'d>> Receiver<'d, D> {
/// Waits for the USB host to enable this interface
pub async fn wait_connection(&mut self) {
self.read_ep.wait_enabled().await
self.read_ep.wait_enabled().await;
}
}

View File

@ -120,7 +120,7 @@ impl Request {
}
/// Gets the descriptor type and index from the value field of a GET_DESCRIPTOR request.
pub fn descriptor_type_index(&self) -> (u8, u8) {
pub const fn descriptor_type_index(&self) -> (u8, u8) {
((self.value >> 8) as u8, self.value as u8)
}
}

View File

@ -2,7 +2,7 @@
use crate::builder::Config;
use crate::driver::EndpointInfo;
use crate::types::*;
use crate::types::{InterfaceNumber, StringIndex};
use crate::CONFIGURATION_VALUE;
/// Standard descriptor types
@ -59,7 +59,7 @@ impl<'a> DescriptorWriter<'a> {
}
/// Gets the current position in the buffer, i.e. the number of bytes written so far.
pub fn position(&self) -> usize {
pub const fn position(&self) -> usize {
self.position
}
@ -67,9 +67,10 @@ impl<'a> DescriptorWriter<'a> {
pub fn write(&mut self, descriptor_type: u8, descriptor: &[u8]) {
let length = descriptor.len();
if (self.position + 2 + length) > self.buf.len() || (length + 2) > 255 {
panic!("Descriptor buffer full");
}
assert!(
(self.position + 2 + length) <= self.buf.len() && (length + 2) <= 255,
"Descriptor buffer full"
);
self.buf[self.position] = (length + 2) as u8;
self.buf[self.position + 1] = descriptor_type;
@ -102,7 +103,7 @@ impl<'a> DescriptorWriter<'a> {
config.serial_number.map_or(0, |_| 3), // iSerialNumber
1, // bNumConfigurations
],
)
);
}
pub(crate) fn configuration(&mut self, config: &Config) {
@ -120,7 +121,7 @@ impl<'a> DescriptorWriter<'a> {
| if config.supports_remote_wakeup { 0x20 } else { 0x00 }, // bmAttributes
(config.max_power / 2) as u8, // bMaxPower
],
)
);
}
#[allow(unused)]
@ -248,9 +249,7 @@ impl<'a> DescriptorWriter<'a> {
pub(crate) fn string(&mut self, string: &str) {
let mut pos = self.position;
if pos + 2 > self.buf.len() {
panic!("Descriptor buffer full");
}
assert!(pos + 2 <= self.buf.len(), "Descriptor buffer full");
self.buf[pos] = 0; // length placeholder
self.buf[pos + 1] = descriptor_type::STRING;
@ -258,9 +257,7 @@ impl<'a> DescriptorWriter<'a> {
pos += 2;
for c in string.encode_utf16() {
if pos >= self.buf.len() {
panic!("Descriptor buffer full");
}
assert!(pos < self.buf.len(), "Descriptor buffer full");
self.buf[pos..pos + 2].copy_from_slice(&c.to_le_bytes());
pos += 2;
@ -279,7 +276,7 @@ pub struct BosWriter<'a> {
}
impl<'a> BosWriter<'a> {
pub(crate) fn new(writer: DescriptorWriter<'a>) -> Self {
pub(crate) const fn new(writer: DescriptorWriter<'a>) -> Self {
Self {
writer,
num_caps_mark: None,
@ -314,9 +311,10 @@ impl<'a> BosWriter<'a> {
let mut start = self.writer.position;
let blen = data.len();
if (start + blen + 3) > self.writer.buf.len() || (blen + 3) > 255 {
panic!("Descriptor buffer full");
}
assert!(
(start + blen + 3) <= self.writer.buf.len() && (blen + 3) <= 255,
"Descriptor buffer full"
);
self.writer.buf[start] = (blen + 3) as u8;
self.writer.buf[start + 1] = descriptor_type::CAPABILITY;

View File

@ -11,11 +11,11 @@ pub struct Reader<'a> {
}
impl<'a> Reader<'a> {
pub fn new(data: &'a [u8]) -> Self {
pub const fn new(data: &'a [u8]) -> Self {
Self { data }
}
pub fn eof(&self) -> bool {
pub const fn eof(&self) -> bool {
self.data.is_empty()
}
@ -102,7 +102,7 @@ pub fn foreach_endpoint(data: &[u8], mut f: impl FnMut(EndpointInfo)) -> Result<
}
descriptor_type::ENDPOINT => {
ep.ep_address = EndpointAddress::from(r.read_u8()?);
f(ep)
f(ep);
}
_ => {}
}

View File

@ -24,12 +24,12 @@ use embassy_futures::select::{select, Either};
use heapless::Vec;
pub use crate::builder::{Builder, Config, FunctionBuilder, InterfaceAltBuilder, InterfaceBuilder};
use crate::config::*;
use crate::control::*;
use crate::descriptor::*;
use crate::config::{MAX_HANDLER_COUNT, MAX_INTERFACE_COUNT};
use crate::control::{InResponse, OutResponse, Recipient, Request, RequestType};
use crate::descriptor::{descriptor_type, lang_id};
use crate::descriptor_reader::foreach_endpoint;
use crate::driver::{Bus, ControlPipe, Direction, Driver, EndpointAddress, Event};
use crate::types::*;
use crate::types::{InterfaceNumber, StringIndex};
/// The global state of the USB device.
///
@ -364,6 +364,8 @@ impl<'d, D: Driver<'d>> UsbDevice<'d, D> {
}
async fn handle_control_in(&mut self, req: Request) {
const DEVICE_DESCRIPTOR_LEN: usize = 18;
let mut resp_length = req.length as usize;
let max_packet_size = self.control.max_packet_size();
@ -371,7 +373,6 @@ impl<'d, D: Driver<'d>> UsbDevice<'d, D> {
// The host doesn't know our EP0 max packet size yet, and might assume
// a full-length packet is a short packet, thinking we're done sending data.
// See https://github.com/hathach/tinyusb/issues/184
const DEVICE_DESCRIPTOR_LEN: usize = 18;
if self.inner.address == 0 && max_packet_size < DEVICE_DESCRIPTOR_LEN && max_packet_size < resp_length {
trace!("received control req while not addressed: capping response to 1 packet.");
resp_length = max_packet_size;
@ -432,7 +433,7 @@ impl<'d, D: Driver<'d>> UsbDevice<'d, D> {
self.control.accept_set_address(self.inner.address).await;
self.inner.set_address_pending = false;
} else {
self.control.accept().await
self.control.accept().await;
}
}
OutResponse::Rejected => self.control.reject().await,
@ -545,9 +546,8 @@ impl<'d, D: Driver<'d>> Inner<'d, D> {
OutResponse::Accepted
}
(Request::SET_CONFIGURATION, CONFIGURATION_NONE_U16) => match self.device_state {
UsbDeviceState::Default => OutResponse::Accepted,
_ => {
(Request::SET_CONFIGURATION, CONFIGURATION_NONE_U16) => {
if self.device_state != UsbDeviceState::Default {
debug!("SET_CONFIGURATION: unconfigured");
self.device_state = UsbDeviceState::Addressed;
@ -561,17 +561,15 @@ impl<'d, D: Driver<'d>> Inner<'d, D> {
for h in &mut self.handlers {
h.configured(false);
}
}
OutResponse::Accepted
}
},
_ => OutResponse::Rejected,
},
(RequestType::Standard, Recipient::Interface) => {
let iface_num = InterfaceNumber::new(req.index as _);
let iface = match self.interfaces.get_mut(iface_num.0 as usize) {
Some(iface) => iface,
None => return OutResponse::Rejected,
let Some(iface) = self.interfaces.get_mut(iface_num.0 as usize) else {
return OutResponse::Rejected;
};
match req.request {
@ -647,9 +645,8 @@ impl<'d, D: Driver<'d>> Inner<'d, D> {
_ => InResponse::Rejected,
},
(RequestType::Standard, Recipient::Interface) => {
let iface = match self.interfaces.get_mut(req.index as usize) {
Some(iface) => iface,
None => return InResponse::Rejected,
let Some(iface) = self.interfaces.get_mut(req.index as usize) else {
return InResponse::Rejected;
};
match req.request {
@ -753,16 +750,12 @@ impl<'d, D: Driver<'d>> Inner<'d, D> {
};
if let Some(s) = s {
if buf.len() < 2 {
panic!("control buffer too small");
}
assert!(buf.len() >= 2, "control buffer too small");
buf[1] = descriptor_type::STRING;
let mut pos = 2;
for c in s.encode_utf16() {
if pos + 2 >= buf.len() {
panic!("control buffer too small");
}
assert!(pos + 2 < buf.len(), "control buffer too small");
buf[pos..pos + 2].copy_from_slice(&c.to_le_bytes());
pos += 2;

View File

@ -6,7 +6,7 @@
use core::mem::size_of;
use super::{capability_type, BosWriter};
use crate::descriptor::{capability_type, BosWriter};
use crate::types::InterfaceNumber;
/// A serialized Microsoft OS 2.0 Descriptor set.

View File

@ -7,7 +7,7 @@
pub struct InterfaceNumber(pub u8);
impl InterfaceNumber {
pub(crate) fn new(index: u8) -> InterfaceNumber {
pub(crate) const fn new(index: u8) -> InterfaceNumber {
InterfaceNumber(index)
}
}
@ -25,7 +25,7 @@ impl From<InterfaceNumber> for u8 {
pub struct StringIndex(pub u8);
impl StringIndex {
pub(crate) fn new(index: u8) -> StringIndex {
pub(crate) const fn new(index: u8) -> StringIndex {
StringIndex(index)
}
}