net/driver: remove Medium, make HardwareAddress non_exhaustive.

cyw43/src/control.rs

@@ -1,7 +1,7 @@
 use core::cmp::{max, min};
 
-use ch::driver::LinkState;
 use embassy_net_driver_channel as ch;
+use embassy_net_driver_channel::driver::{HardwareAddress, LinkState};
 use embassy_time::Timer;
 
 pub use crate::bus::SpiBusCyw43;
@@ -133,7 +133,7 @@ impl<'a> Control<'a> {
 
         Timer::after_millis(100).await;
 
-        self.state_ch.set_ethernet_address(mac_addr);
+        self.state_ch.set_hardware_address(HardwareAddress::Ethernet(mac_addr));
 
         debug!("INIT DONE");
     }

embassy-net-driver-channel/CHANGELOG.md

@@ -5,14 +5,12 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-## 0.2.0 - 2023-10-15
+## 0.2.0 - 2023-10-18
 
-- Update embassy-net-driver
+- Update `embassy-net-driver` to v0.2
-- `Runner::new` now takes an `embassy_net_driver::HardwareAddress` parameter
+- `Runner::new` now takes an `embassy_net_driver::HardwareAddress` parameter.
-- Added `Runner::set_ieee802154_address`, `Runner::ieee802154_address`
+- `Runner::set_ethernet_address` is now `set_hardware_address`.
 
 ## 0.1.0 - 2023-06-29
 
 - First release
-
-

embassy-net-driver-channel/README.md

@@ -7,7 +7,9 @@ The `embassy-net-driver` trait is polling-based. To implement it, you must write
 hand, and hook up the `Waker`s provided by `embassy-net` to the right interrupt handlers so that `embassy-net`
 knows when to poll your driver again to make more progress.
 
-With `embassy-net-driver-channel`
+With `embassy-net-driver-channel` you get a "channel-like" interface instead, where you can send/receive packets
+to/from embassy-net. The intended usage is to spawn a "driver task" in the background that does this, passing
+packets between the hardware and the channel.
 
 ## A note about deadlocks
 
@@ -41,7 +43,7 @@ However, this code has a latent deadlock bug. The symptom is it can hang at `rx_
 
 The reason is that, under load, both the TX and RX queues can get full at the same time. When this happens, the `embassy-net` task stalls trying to send because the TX queue is full, therefore it stops processing packets in the RX queue. Your driver task also stalls because the RX queue is full, therefore it stops processing packets in the TX queue.
 
-The fix is to make sure to always service the TX queue while you're waiting for space to become available in the TX queue. For example, select on either "tx_chan.tx_buf() available" or "INT is low AND rx_chan.rx_buf() available":
+The fix is to make sure to always service the TX queue while you're waiting for space to become available in the RX queue. For example, select on either "tx_chan.tx_buf() available" or "INT is low AND rx_chan.rx_buf() available":
 
 ```rust,ignore
 loop {
@@ -79,12 +81,10 @@ These `embassy-net` drivers are implemented using this crate. You can look at th
 - [`embassy-net-wiznet`](https://github.com/embassy-rs/embassy/tree/main/embassy-net-wiznet) for Wiznet SPI Ethernet MAC+PHY chips.
 - [`embassy-net-esp-hosted`](https://github.com/embassy-rs/embassy/tree/main/embassy-net-esp-hosted) for using ESP32 chips with the [`esp-hosted`](https://github.com/espressif/esp-hosted) firmware as WiFi adapters for another non-ESP32 MCU.
 
-
 ## Interoperability
 
 This crate can run on any executor.
 
-
 ## License
 
 This work is licensed under either of

embassy-net-driver-channel/src/lib.rs

@@ -8,9 +8,8 @@ use core::cell::RefCell;
 use core::mem::MaybeUninit;
 use core::task::{Context, Poll};
 
-use driver::HardwareAddress;
 pub use embassy_net_driver as driver;
-use embassy_net_driver::{Capabilities, LinkState, Medium};
+use embassy_net_driver::{Capabilities, LinkState};
 use embassy_sync::blocking_mutex::raw::NoopRawMutex;
 use embassy_sync::blocking_mutex::Mutex;
 use embassy_sync::waitqueue::WakerRegistration;
@@ -161,18 +160,10 @@ impl<'d> StateRunner<'d> {
         });
     }
 
-    pub fn set_ethernet_address(&self, address: [u8; 6]) {
+    pub fn set_hardware_address(&self, address: driver::HardwareAddress) {
         self.shared.lock(|s| {
             let s = &mut *s.borrow_mut();
-            s.hardware_address = driver::HardwareAddress::Ethernet(address);
+            s.hardware_address = address;
-            s.waker.wake();
-        });
-    }
-
-    pub fn set_ieee802154_address(&self, address: [u8; 8]) {
-        self.shared.lock(|s| {
-            let s = &mut *s.borrow_mut();
-            s.hardware_address = driver::HardwareAddress::Ieee802154(address);
             s.waker.wake();
         });
     }
@@ -232,11 +223,6 @@ pub fn new<'d, const MTU: usize, const N_RX: usize, const N_TX: usize>(
 ) -> (Runner<'d, MTU>, Device<'d, MTU>) {
     let mut caps = Capabilities::default();
     caps.max_transmission_unit = MTU;
-    caps.medium = match &hardware_address {
-        HardwareAddress::Ethernet(_) => Medium::Ethernet,
-        HardwareAddress::Ieee802154(_) => Medium::Ieee802154,
-        HardwareAddress::Ip => Medium::Ip,
-    };
 
     // safety: this is a self-referential struct, however:
     // - it can't move while the `'d` borrow is active.

embassy-net-driver/CHANGELOG.md

@@ -5,13 +5,13 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-## 0.2.0 - 2023-10-15
+## 0.2.0 - 2023-10-18
 
-- Added `Driver::ieee802154_address`
+- Added support for IEEE 802.15.4 mediums.
-- Added `Medium::Ieee802154`
+- Added `Driver::hardware_address()`, `HardwareAddress`.
+- Removed `Medium` enum. The medium is deduced out of the hardware address.
+- Removed `Driver::ethernet_address()`. Replacement is `hardware_address()`.
 
 ## 0.1.0 - 2023-06-29
 
 - First release
-
-

embassy-net-driver/src/lib.rs

@@ -7,12 +7,23 @@ use core::task::Context;
 /// Representation of an hardware address, such as an Ethernet address or an IEEE802.15.4 address.
 #[derive(Debug, Clone, Copy, PartialEq, Eq)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
+#[non_exhaustive]
 pub enum HardwareAddress {
-    /// A six-octet Ethernet address
+    /// Ethernet medium, with a A six-octet Ethernet address.
+    ///
+    /// Devices of this type send and receive Ethernet frames,
+    /// and interfaces using it must do neighbor discovery via ARP or NDISC.
+    ///
+    /// Examples of devices of this type are Ethernet, WiFi (802.11), Linux `tap`, and VPNs in tap (layer 2) mode.
     Ethernet([u8; 6]),
-    /// An eight-octet IEEE802.15.4 address
+    /// 6LoWPAN over IEEE802.15.4, with an eight-octet address.
     Ieee802154([u8; 8]),
-    /// Indicates that a Driver is IP-native, and has no hardware address
+    /// Indicates that a Driver is IP-native, and has no hardware address.
+    ///
+    /// Devices of this type send and receive IP frames, without an
+    /// Ethernet header. MAC addresses are not used, and no neighbor discovery (ARP, NDISC) is done.
+    ///
+    /// Examples of devices of this type are the Linux `tun`, PPP interfaces, VPNs in tun (layer 3) mode.
     Ip,
 }
 
@@ -64,6 +75,10 @@ pub trait Driver {
     fn capabilities(&self) -> Capabilities;
 
     /// Get the device's hardware address.
+    ///
+    /// The returned hardware address also determines the "medium" of this driver. This indicates
+    /// what kind of packet the sent/received bytes are, and determines some behaviors of
+    /// the interface. For example, ARP/NDISC address resolution is only done for Ethernet mediums.
     fn hardware_address(&self) -> HardwareAddress;
 }
 
@@ -124,13 +139,6 @@ pub trait TxToken {
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
 #[non_exhaustive]
 pub struct Capabilities {
-    /// Medium of the device.
-    ///
-    /// This indicates what kind of packet the sent/received bytes are, and determines
-    /// some behaviors of Interface. For example, ARP/NDISC address resolution is only done
-    /// for Ethernet mediums.
-    pub medium: Medium,
-
     /// Maximum transmission unit.
     ///
     /// The network device is unable to send or receive frames larger than the value returned
@@ -161,32 +169,6 @@ pub struct Capabilities {
     pub checksum: ChecksumCapabilities,
 }
 
-/// Type of medium of a device.
-#[derive(Debug, Eq, PartialEq, Copy, Clone)]
-#[cfg_attr(feature = "defmt", derive(defmt::Format))]
-pub enum Medium {
-    /// Ethernet medium. Devices of this type send and receive Ethernet frames,
-    /// and interfaces using it must do neighbor discovery via ARP or NDISC.
-    ///
-    /// Examples of devices of this type are Ethernet, WiFi (802.11), Linux `tap`, and VPNs in tap (layer 2) mode.
-    Ethernet,
-
-    /// IP medium. Devices of this type send and receive IP frames, without an
-    /// Ethernet header. MAC addresses are not used, and no neighbor discovery (ARP, NDISC) is done.
-    ///
-    /// Examples of devices of this type are the Linux `tun`, PPP interfaces, VPNs in tun (layer 3) mode.
-    Ip,
-
-    /// IEEE 802_15_4 medium
-    Ieee802154,
-}
-
-impl Default for Medium {
-    fn default() -> Medium {
-        Medium::Ethernet
-    }
-}
-
 /// A description of checksum behavior for every supported protocol.
 #[derive(Debug, Clone, Default)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]

embassy-net-enc28j60/src/lib.rs

@@ -19,7 +19,7 @@ mod traits;
 use core::cmp;
 use core::convert::TryInto;
 
-use embassy_net_driver::{Capabilities, HardwareAddress, LinkState, Medium};
+use embassy_net_driver::{Capabilities, HardwareAddress, LinkState};
 use embassy_time::Duration;
 use embedded_hal::digital::OutputPin;
 use embedded_hal::spi::{Operation, SpiDevice};
@@ -671,7 +671,6 @@ where
     fn capabilities(&self) -> Capabilities {
         let mut caps = Capabilities::default();
         caps.max_transmission_unit = MTU;
-        caps.medium = Medium::Ethernet;
         caps
     }
 

embassy-net-esp-hosted/src/control.rs

@@ -1,5 +1,5 @@
-use ch::driver::LinkState;
 use embassy_net_driver_channel as ch;
+use embassy_net_driver_channel::driver::{HardwareAddress, LinkState};
 use heapless::String;
 
 use crate::ioctl::Shared;
@@ -77,7 +77,7 @@ impl<'a> Control<'a> {
 
         let mac_addr = self.get_mac_addr().await?;
         debug!("mac addr: {:02x}", mac_addr);
-        self.state_ch.set_ethernet_address(mac_addr);
+        self.state_ch.set_hardware_address(HardwareAddress::Ethernet(mac_addr));
 
         Ok(())
     }

embassy-net/CHANGELOG.md

@@ -5,7 +5,7 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-## 0.2.0 - 2023-10-15
+## 0.2.0 - 2023-10-18
 
 - Re-export `smoltcp::wire::IpEndpoint`
 - Add poll functions on UdpSocket
@@ -27,5 +27,3 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## 0.1.0 - 2023-06-29
 
 - First release
-
-

embassy-net/src/device.rs

@@ -1,7 +1,7 @@
 use core::task::Context;
 
-use embassy_net_driver::{Capabilities, Checksum, Driver, Medium, RxToken, TxToken};
+use embassy_net_driver::{Capabilities, Checksum, Driver, RxToken, TxToken};
-use smoltcp::phy;
+use smoltcp::phy::{self, Medium};
 use smoltcp::time::Instant;
 
 pub(crate) struct DriverAdapter<'d, 'c, T>
@@ -11,6 +11,7 @@ where
     // must be Some when actually using this to rx/tx
     pub cx: Option<&'d mut Context<'c>>,
     pub inner: &'d mut T,
+    pub medium: Medium,
 }
 
 impl<'d, 'c, T> phy::Device for DriverAdapter<'d, 'c, T>
@@ -46,19 +47,7 @@ where
 
         smolcaps.max_transmission_unit = caps.max_transmission_unit;
         smolcaps.max_burst_size = caps.max_burst_size;
-        smolcaps.medium = match caps.medium {
+        smolcaps.medium = self.medium;
-            #[cfg(feature = "medium-ethernet")]
-            Medium::Ethernet => phy::Medium::Ethernet,
-            #[cfg(feature = "medium-ip")]
-            Medium::Ip => phy::Medium::Ip,
-            #[cfg(feature = "medium-ieee802154")]
-            Medium::Ieee802154 => phy::Medium::Ieee802154,
-            #[allow(unreachable_patterns)]
-            _ => panic!(
-                "Unsupported medium {:?}. Make sure to enable it in embassy-net's Cargo features.",
-                caps.medium
-            ),
-        };
         smolcaps.checksum.ipv4 = convert(caps.checksum.ipv4);
         smolcaps.checksum.tcp = convert(caps.checksum.tcp);
         smolcaps.checksum.udp = convert(caps.checksum.udp);

embassy-net/src/lib.rs

@@ -33,6 +33,7 @@ use heapless::Vec;
 pub use smoltcp::iface::MulticastError;
 #[allow(unused_imports)]
 use smoltcp::iface::{Interface, SocketHandle, SocketSet, SocketStorage};
+use smoltcp::phy::Medium;
 #[cfg(feature = "dhcpv4")]
 use smoltcp::socket::dhcpv4::{self, RetryConfig};
 #[cfg(feature = "medium-ethernet")]
@@ -264,14 +265,17 @@ pub(crate) struct SocketStack {
     next_local_port: u16,
 }
 
-fn to_smoltcp_hardware_address(addr: driver::HardwareAddress) -> HardwareAddress {
+fn to_smoltcp_hardware_address(addr: driver::HardwareAddress) -> (HardwareAddress, Medium) {
     match addr {
         #[cfg(feature = "medium-ethernet")]
-        driver::HardwareAddress::Ethernet(eth) => HardwareAddress::Ethernet(EthernetAddress(eth)),
+        driver::HardwareAddress::Ethernet(eth) => (HardwareAddress::Ethernet(EthernetAddress(eth)), Medium::Ethernet),
         #[cfg(feature = "medium-ieee802154")]
-        driver::HardwareAddress::Ieee802154(ieee) => HardwareAddress::Ieee802154(Ieee802154Address::Extended(ieee)),
+        driver::HardwareAddress::Ieee802154(ieee) => (
+            HardwareAddress::Ieee802154(Ieee802154Address::Extended(ieee)),
+            Medium::Ieee802154,
+        ),
         #[cfg(feature = "medium-ip")]
-        driver::HardwareAddress::Ip => HardwareAddress::Ip,
+        driver::HardwareAddress::Ip => (HardwareAddress::Ip, Medium::Ip),
 
         #[allow(unreachable_patterns)]
         _ => panic!(
@@ -289,7 +293,8 @@ impl<D: Driver> Stack<D> {
         resources: &'static mut StackResources<SOCK>,
         random_seed: u64,
     ) -> Self {
-        let mut iface_cfg = smoltcp::iface::Config::new(to_smoltcp_hardware_address(device.hardware_address()));
+        let (hardware_addr, medium) = to_smoltcp_hardware_address(device.hardware_address());
+        let mut iface_cfg = smoltcp::iface::Config::new(hardware_addr);
         iface_cfg.random_seed = random_seed;
 
         let iface = Interface::new(
@@ -297,6 +302,7 @@ impl<D: Driver> Stack<D> {
             &mut DriverAdapter {
                 inner: &mut device,
                 cx: None,
+                medium,
             },
             instant_to_smoltcp(Instant::now()),
         );
@@ -356,7 +362,7 @@ impl<D: Driver> Stack<D> {
 
     /// Get the hardware address of the network interface.
     pub fn hardware_address(&self) -> HardwareAddress {
-        self.with(|_s, i| to_smoltcp_hardware_address(i.device.hardware_address()))
+        self.with(|_s, i| to_smoltcp_hardware_address(i.device.hardware_address()).0)
     }
 
     /// Get whether the link is up.
@@ -812,18 +818,28 @@ impl<D: Driver> Inner<D> {
     fn poll(&mut self, cx: &mut Context<'_>, s: &mut SocketStack) {
         s.waker.register(cx.waker());
 
+        let (_hardware_addr, medium) = to_smoltcp_hardware_address(self.device.hardware_address());
+
         #[cfg(any(feature = "medium-ethernet", feature = "medium-ieee802154"))]
-        if self.device.capabilities().medium == embassy_net_driver::Medium::Ethernet
-            || self.device.capabilities().medium == embassy_net_driver::Medium::Ieee802154
         {
-            s.iface
+            let do_set = match medium {
-                .set_hardware_addr(to_smoltcp_hardware_address(self.device.hardware_address()));
+                #[cfg(feature = "medium-ethernet")]
+                Medium::Ethernet => true,
+                #[cfg(feature = "medium-ieee802154")]
+                Medium::Ieee802154 => true,
+                #[allow(unreachable_patterns)]
+                _ => false,
+            };
+            if do_set {
+                s.iface.set_hardware_addr(_hardware_addr);
+            }
         }
 
         let timestamp = instant_to_smoltcp(Instant::now());
         let mut smoldev = DriverAdapter {
             cx: Some(cx),
             inner: &mut self.device,
+            medium,
         };
         s.iface.poll(timestamp, &mut smoldev, &mut s.sockets);
 

embassy-stm32-wpan/src/mac/driver.rs

@@ -3,7 +3,7 @@
 
 use core::task::Context;
 
-use embassy_net_driver::{Capabilities, HardwareAddress, LinkState, Medium};
+use embassy_net_driver::{Capabilities, HardwareAddress, LinkState};
 use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex;
 use embassy_sync::channel::Channel;
 
@@ -60,24 +60,15 @@ impl<'d> embassy_net_driver::Driver for Driver<'d> {
         let mut caps = Capabilities::default();
         caps.max_transmission_unit = MTU;
         // caps.max_burst_size = Some(self.tx.len());
-
-        caps.medium = Medium::Ieee802154;
         caps
     }
 
     fn link_state(&mut self, _cx: &mut Context) -> LinkState {
-        //        if self.phy.poll_link(&mut self.station_management, cx) {
-        //            LinkState::Up
-        //        } else {
-        //            LinkState::Down
-        //        }
-
         LinkState::Down
     }
 
     fn hardware_address(&self) -> HardwareAddress {
         // self.mac_addr
-
         HardwareAddress::Ieee802154([0; 8])
     }
 }