rp/gpio: implement Input

embassy-rp-examples/src/bin/blinky.rs

@@ -0,0 +1,32 @@
+#![no_std]
+#![no_main]
+#![feature(asm)]
+#![feature(min_type_alias_impl_trait)]
+#![feature(impl_trait_in_bindings)]
+#![feature(type_alias_impl_trait)]
+#![allow(incomplete_features)]
+
+#[path = "../example_common.rs"]
+mod example_common;
+
+use defmt::*;
+use embassy::executor::Spawner;
+use embassy_rp::{gpio, Peripherals};
+use embedded_hal::digital::v2::OutputPin;
+
+#[embassy::main]
+async fn main(_spawner: Spawner) {
+    let p = unwrap!(Peripherals::take());
+
+    let mut led = gpio::Output::new(p.PIN_25, gpio::Level::Low);
+
+    loop {
+        info!("led on!");
+        led.set_high().unwrap();
+        cortex_m::asm::delay(1_000_000);
+
+        info!("led off!");
+        led.set_low().unwrap();
+        cortex_m::asm::delay(1_000_000);
+    }
+}

embassy-rp-examples/src/bin/button.rs

@@ -0,0 +1,28 @@
+#![no_std]
+#![no_main]
+#![feature(asm)]
+#![feature(min_type_alias_impl_trait)]
+#![feature(impl_trait_in_bindings)]
+#![feature(type_alias_impl_trait)]
+#![allow(incomplete_features)]
+
+#[path = "../example_common.rs"]
+mod example_common;
+
+use defmt::*;
+use embassy::executor::Spawner;
+use embassy_rp::gpio::{Input, Pull};
+use embassy_rp::Peripherals;
+use embedded_hal::digital::v2::InputPin;
+
+#[embassy::main]
+async fn main(_spawner: Spawner) {
+    let p = unwrap!(Peripherals::take());
+
+    let button = Input::new(p.PIN_28, Pull::Up);
+
+    loop {
+        info!("high? {=bool}", button.is_high().unwrap());
+        cortex_m::asm::delay(1_000_000);
+    }
+}

embassy-rp-examples/src/bin/uart.rs

@@ -0,0 +1,28 @@
+#![no_std]
+#![no_main]
+#![feature(asm)]
+#![feature(min_type_alias_impl_trait)]
+#![feature(impl_trait_in_bindings)]
+#![feature(type_alias_impl_trait)]
+#![allow(incomplete_features)]
+
+#[path = "../example_common.rs"]
+mod example_common;
+
+use defmt::*;
+use embassy::executor::Spawner;
+use embassy_rp::{uart, Peripherals};
+
+#[embassy::main]
+async fn main(_spanwer: Spawner) {
+    let p = unwrap!(Peripherals::take());
+
+    let config = uart::Config::default();
+    let mut uart = uart::Uart::new(p.UART0, p.PIN_0, p.PIN_1, p.PIN_2, p.PIN_3, config);
+    uart.send("Hello World!\r\n".as_bytes());
+
+    loop {
+        uart.send("hello there!\r\n".as_bytes());
+        cortex_m::asm::delay(1_000_000);
+    }
+}

embassy-rp-examples/src/example_common.rs

@@ -0,0 +1,16 @@
+use core::sync::atomic::{AtomicUsize, Ordering};
+use defmt_rtt as _;
+use panic_probe as _;
+
+#[link_section = ".boot2"]
+#[used]
+pub static BOOT2: [u8; 256] = rp2040_boot2::BOOT_LOADER;
+
+defmt::timestamp! {"{=u64}", {
+    static COUNT: AtomicUsize = AtomicUsize::new(0);
+    // NOTE(no-CAS) `timestamps` runs with interrupts disabled
+    let n = COUNT.load(Ordering::Relaxed);
+    COUNT.store(n + 1, Ordering::Relaxed);
+    n as u64
+}
+}

embassy-rp-examples/src/main.rs

@@ -1,72 +0,0 @@
-#![no_std]
-#![no_main]
-#![feature(asm)]
-#![feature(min_type_alias_impl_trait)]
-#![feature(impl_trait_in_bindings)]
-#![feature(type_alias_impl_trait)]
-
-use core::sync::atomic::{AtomicUsize, Ordering};
-use defmt::{panic, *};
-use defmt_rtt as _;
-use embassy::executor::Spawner;
-use embassy::interrupt::InterruptExt;
-use embassy_rp::{dma, gpio, interrupt, uart, Peripherals};
-use embedded_hal::digital::v2::OutputPin;
-use panic_probe as _;
-use rp2040_pac2 as pac;
-
-#[link_section = ".boot2"]
-#[used]
-pub static BOOT2: [u8; 256] = rp2040_boot2::BOOT_LOADER;
-
-defmt::timestamp! {"{=u64}", {
-    static COUNT: AtomicUsize = AtomicUsize::new(0);
-    // NOTE(no-CAS) `timestamps` runs with interrupts disabled
-    let n = COUNT.load(Ordering::Relaxed);
-    COUNT.store(n + 1, Ordering::Relaxed);
-    n as u64
-}
-}
-
-#[embassy::main]
-async fn main(spanwer: Spawner) {
-    let p = unwrap!(Peripherals::take());
-
-    let mut config = uart::Config::default();
-    let mut uart = uart::Uart::new(p.UART0, p.PIN_0, p.PIN_1, p.PIN_2, p.PIN_3, config);
-    uart.send("Hello World!\r\n".as_bytes());
-
-    let mut led = gpio::Output::new(p.PIN_25, gpio::Level::Low);
-
-    let irq = interrupt::take!(DMA_IRQ_0);
-    unsafe {
-        //pac::DMA.inte0().write(|w| w.set_inte0(1 << 0));
-    }
-    irq.set_handler(dma_irq);
-    irq.unpend();
-    irq.enable();
-
-    let from: [u32; 4] = [1, 2, 3, 4];
-    let mut to: [u32; 4] = [9, 8, 7, 6];
-    info!("before dma: from = {:?}, to = {:?}", from, to);
-    cortex_m::asm::delay(4_000_000);
-    dma::Dma::copy(p.DMA_CH0, &from, &mut to);
-    cortex_m::asm::delay(4_000_000);
-    info!("after dma: from = {:?}, to = {:?}", from, to);
-
-    loop {
-        info!("led on!");
-        uart.send("ON!\r".as_bytes());
-        led.set_high().unwrap();
-        cortex_m::asm::delay(1_000_000);
-
-        info!("led off!");
-        uart.send("Off!\r".as_bytes());
-        led.set_low().unwrap();
-        cortex_m::asm::delay(4_000_000);
-    }
-}
-
-unsafe fn dma_irq(ctx: *mut ()) {
-    info!("DMA IRQ!");
-}

embassy-rp/src/gpio.rs

@@ -40,7 +40,24 @@ impl<'d, T: Pin> Input<'d, T> {
     pub fn new(pin: impl PeripheralBorrow<Target = T> + 'd, pull: Pull) -> Self {
         unborrow!(pin);
 
-        // todo
+        unsafe {
+            pin.pad_ctrl().write(|w| {
+                w.set_ie(true);
+                match pull {
+                    Pull::Up => w.set_pue(true),
+                    Pull::Down => w.set_pde(true),
+                    Pull::None => {}
+                }
+            });
+
+            // disable output in SIO, to use it as input
+            pin.sio_oe().value_clr().write_value(1 << pin.pin());
+
+            pin.io().ctrl().write(|w| {
+                w.set_funcsel(pac::io::vals::Gpio0CtrlFuncsel::SIO_0.0);
+            });
+        }
+
         Self {
             pin,
             phantom: PhantomData,
@@ -62,8 +79,8 @@ impl<'d, T: Pin> InputPin for Input<'d, T> {
     }
 
     fn is_low(&self) -> Result<bool, Self::Error> {
-        // todo
+        let val = 1 << self.pin.pin();
-        Ok(true)
+        Ok(unsafe { self.pin.sio_in().read() } & val == 0)
     }
 }