1105: embassy-rp: Add multicore support r=Dirbaio a=kalkyl

This PR adds multicore support + critical-section impl using hardware spinlocks.
Based on the rp2040-hal implementation.

Co-authored-by: kalkyl <henrik.alser@me.com>
Co-authored-by: Henrik Alsér <henrik.alser@me.com>
This commit is contained in:
bors[bot] 2022-12-13 14:55:34 +00:00 committed by GitHub
commit 47747d3b73
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
9 changed files with 590 additions and 12 deletions

View File

@ -15,6 +15,9 @@ flavors = [
[features] [features]
defmt = ["dep:defmt", "embassy-usb-driver?/defmt", "embassy-hal-common/defmt"] defmt = ["dep:defmt", "embassy-usb-driver?/defmt", "embassy-hal-common/defmt"]
# critical section that is safe for multicore use
critical-section-impl = ["critical-section/restore-state-u8"]
# Reexport the PAC for the currently enabled chip at `embassy_rp::pac`. # Reexport the PAC for the currently enabled chip at `embassy_rp::pac`.
# This is unstable because semver-minor (non-breaking) releases of embassy-rp may major-bump (breaking) the PAC version. # This is unstable because semver-minor (non-breaking) releases of embassy-rp may major-bump (breaking) the PAC version.
# If this is an issue for you, you're encouraged to directly depend on a fixed version of the PAC. # If this is an issue for you, you're encouraged to directly depend on a fixed version of the PAC.

View File

@ -0,0 +1,142 @@
use core::sync::atomic::{AtomicU8, Ordering};
use crate::pac;
struct RpSpinlockCs;
critical_section::set_impl!(RpSpinlockCs);
/// Marker value to indicate no-one has the lock.
///
/// Initialising `LOCK_OWNER` to 0 means cheaper static initialisation so it's the best choice
const LOCK_UNOWNED: u8 = 0;
/// Indicates which core owns the lock so that we can call critical_section recursively.
///
/// 0 = no one has the lock, 1 = core0 has the lock, 2 = core1 has the lock
static LOCK_OWNER: AtomicU8 = AtomicU8::new(LOCK_UNOWNED);
/// Marker value to indicate that we already owned the lock when we started the `critical_section`.
///
/// Since we can't take the spinlock when we already have it, we need some other way to keep track of `critical_section` ownership.
/// `critical_section` provides a token for communicating between `acquire` and `release` so we use that.
/// If we're the outermost call to `critical_section` we use the values 0 and 1 to indicate we should release the spinlock and set the interrupts back to disabled and enabled, respectively.
/// The value 2 indicates that we aren't the outermost call, and should not release the spinlock or re-enable interrupts in `release`
const LOCK_ALREADY_OWNED: u8 = 2;
unsafe impl critical_section::Impl for RpSpinlockCs {
unsafe fn acquire() -> u8 {
RpSpinlockCs::acquire()
}
unsafe fn release(token: u8) {
RpSpinlockCs::release(token);
}
}
impl RpSpinlockCs {
unsafe fn acquire() -> u8 {
// Store the initial interrupt state and current core id in stack variables
let interrupts_active = cortex_m::register::primask::read().is_active();
// We reserved 0 as our `LOCK_UNOWNED` value, so add 1 to core_id so we get 1 for core0, 2 for core1.
let core = pac::SIO.cpuid().read() as u8 + 1;
// Do we already own the spinlock?
if LOCK_OWNER.load(Ordering::Acquire) == core {
// We already own the lock, so we must have called acquire within a critical_section.
// Return the magic inner-loop value so that we know not to re-enable interrupts in release()
LOCK_ALREADY_OWNED
} else {
// Spin until we get the lock
loop {
// Need to disable interrupts to ensure that we will not deadlock
// if an interrupt enters critical_section::Impl after we acquire the lock
cortex_m::interrupt::disable();
// Ensure the compiler doesn't re-order accesses and violate safety here
core::sync::atomic::compiler_fence(Ordering::SeqCst);
// Read the spinlock reserved for `critical_section`
if let Some(lock) = Spinlock31::try_claim() {
// We just acquired the lock.
// 1. Forget it, so we don't immediately unlock
core::mem::forget(lock);
// 2. Store which core we are so we can tell if we're called recursively
LOCK_OWNER.store(core, Ordering::Relaxed);
break;
}
// We didn't get the lock, enable interrupts if they were enabled before we started
if interrupts_active {
cortex_m::interrupt::enable();
}
}
// If we broke out of the loop we have just acquired the lock
// As the outermost loop, we want to return the interrupt status to restore later
interrupts_active as _
}
}
unsafe fn release(token: u8) {
// Did we already own the lock at the start of the `critical_section`?
if token != LOCK_ALREADY_OWNED {
// No, it wasn't owned at the start of this `critical_section`, so this core no longer owns it.
// Set `LOCK_OWNER` back to `LOCK_UNOWNED` to ensure the next critical section tries to obtain the spinlock instead
LOCK_OWNER.store(LOCK_UNOWNED, Ordering::Relaxed);
// Ensure the compiler doesn't re-order accesses and violate safety here
core::sync::atomic::compiler_fence(Ordering::SeqCst);
// Release the spinlock to allow others to enter critical_section again
Spinlock31::release();
// Re-enable interrupts if they were enabled when we first called acquire()
// We only do this on the outermost `critical_section` to ensure interrupts stay disabled
// for the whole time that we have the lock
if token != 0 {
cortex_m::interrupt::enable();
}
}
}
}
pub struct Spinlock<const N: usize>(core::marker::PhantomData<()>)
where
Spinlock<N>: SpinlockValid;
impl<const N: usize> Spinlock<N>
where
Spinlock<N>: SpinlockValid,
{
/// Try to claim the spinlock. Will return `Some(Self)` if the lock is obtained, and `None` if the lock is
/// already in use somewhere else.
pub fn try_claim() -> Option<Self> {
// Safety: We're only reading from this register
unsafe {
let lock = pac::SIO.spinlock(N).read();
if lock > 0 {
Some(Self(core::marker::PhantomData))
} else {
None
}
}
}
/// Clear a locked spin-lock.
///
/// # Safety
///
/// Only call this function if you hold the spin-lock.
pub unsafe fn release() {
unsafe {
// Write (any value): release the lock
pac::SIO.spinlock(N).write_value(1);
}
}
}
impl<const N: usize> Drop for Spinlock<N>
where
Spinlock<N>: SpinlockValid,
{
fn drop(&mut self) {
// This is safe because we own the object, and hence hold the lock.
unsafe { Self::release() }
}
}
pub(crate) type Spinlock31 = Spinlock<31>;
pub trait SpinlockValid {}
impl SpinlockValid for Spinlock<31> {}

View File

@ -6,6 +6,7 @@ use embedded_storage::nor_flash::{
ReadNorFlash, ReadNorFlash,
}; };
use crate::pac;
use crate::peripherals::FLASH; use crate::peripherals::FLASH;
pub const FLASH_BASE: usize = 0x10000000; pub const FLASH_BASE: usize = 0x10000000;
@ -28,6 +29,7 @@ pub enum Error {
OutOfBounds, OutOfBounds,
/// Unaligned operation or using unaligned buffers. /// Unaligned operation or using unaligned buffers.
Unaligned, Unaligned,
InvalidCore,
Other, Other,
} }
@ -46,7 +48,7 @@ impl NorFlashError for Error {
match self { match self {
Self::OutOfBounds => NorFlashErrorKind::OutOfBounds, Self::OutOfBounds => NorFlashErrorKind::OutOfBounds,
Self::Unaligned => NorFlashErrorKind::NotAligned, Self::Unaligned => NorFlashErrorKind::NotAligned,
Self::Other => NorFlashErrorKind::Other, _ => NorFlashErrorKind::Other,
} }
} }
} }
@ -87,7 +89,7 @@ impl<'d, T: Instance, const FLASH_SIZE: usize> Flash<'d, T, FLASH_SIZE> {
let len = to - from; let len = to - from;
unsafe { self.in_ram(|| ram_helpers::flash_range_erase(from, len, true)) }; unsafe { self.in_ram(|| ram_helpers::flash_range_erase(from, len, true))? };
Ok(()) Ok(())
} }
@ -112,7 +114,7 @@ impl<'d, T: Instance, const FLASH_SIZE: usize> Flash<'d, T, FLASH_SIZE> {
let unaligned_offset = offset as usize - start; let unaligned_offset = offset as usize - start;
unsafe { self.in_ram(|| ram_helpers::flash_range_program(unaligned_offset as u32, &pad_buf, true)) } unsafe { self.in_ram(|| ram_helpers::flash_range_program(unaligned_offset as u32, &pad_buf, true))? }
} }
let remaining_len = bytes.len() - start_padding; let remaining_len = bytes.len() - start_padding;
@ -130,12 +132,12 @@ impl<'d, T: Instance, const FLASH_SIZE: usize> Flash<'d, T, FLASH_SIZE> {
if bytes.as_ptr() as usize >= 0x2000_0000 { if bytes.as_ptr() as usize >= 0x2000_0000 {
let aligned_data = &bytes[start_padding..end_padding]; let aligned_data = &bytes[start_padding..end_padding];
unsafe { self.in_ram(|| ram_helpers::flash_range_program(aligned_offset as u32, aligned_data, true)) } unsafe { self.in_ram(|| ram_helpers::flash_range_program(aligned_offset as u32, aligned_data, true))? }
} else { } else {
for chunk in bytes[start_padding..end_padding].chunks_exact(PAGE_SIZE) { for chunk in bytes[start_padding..end_padding].chunks_exact(PAGE_SIZE) {
let mut ram_buf = [0xFF_u8; PAGE_SIZE]; let mut ram_buf = [0xFF_u8; PAGE_SIZE];
ram_buf.copy_from_slice(chunk); ram_buf.copy_from_slice(chunk);
unsafe { self.in_ram(|| ram_helpers::flash_range_program(aligned_offset as u32, &ram_buf, true)) } unsafe { self.in_ram(|| ram_helpers::flash_range_program(aligned_offset as u32, &ram_buf, true))? }
aligned_offset += PAGE_SIZE; aligned_offset += PAGE_SIZE;
} }
} }
@ -150,7 +152,7 @@ impl<'d, T: Instance, const FLASH_SIZE: usize> Flash<'d, T, FLASH_SIZE> {
let unaligned_offset = end_offset - (PAGE_SIZE - rem_offset); let unaligned_offset = end_offset - (PAGE_SIZE - rem_offset);
unsafe { self.in_ram(|| ram_helpers::flash_range_program(unaligned_offset as u32, &pad_buf, true)) } unsafe { self.in_ram(|| ram_helpers::flash_range_program(unaligned_offset as u32, &pad_buf, true))? }
} }
Ok(()) Ok(())
@ -159,10 +161,17 @@ impl<'d, T: Instance, const FLASH_SIZE: usize> Flash<'d, T, FLASH_SIZE> {
/// Make sure to uphold the contract points with rp2040-flash. /// Make sure to uphold the contract points with rp2040-flash.
/// - interrupts must be disabled /// - interrupts must be disabled
/// - DMA must not access flash memory /// - DMA must not access flash memory
unsafe fn in_ram(&mut self, operation: impl FnOnce()) { unsafe fn in_ram(&mut self, operation: impl FnOnce()) -> Result<(), Error> {
let dma_status = &mut [false; crate::dma::CHANNEL_COUNT]; let dma_status = &mut [false; crate::dma::CHANNEL_COUNT];
// TODO: Make sure CORE1 is paused during the entire duration of the RAM function // Make sure we're running on CORE0
let core_id: u32 = unsafe { pac::SIO.cpuid().read() };
if core_id != 0 {
return Err(Error::InvalidCore);
}
// Make sure CORE1 is paused during the entire duration of the RAM function
crate::multicore::pause_core1();
critical_section::with(|_| { critical_section::with(|_| {
// Pause all DMA channels for the duration of the ram operation // Pause all DMA channels for the duration of the ram operation
@ -185,6 +194,10 @@ impl<'d, T: Instance, const FLASH_SIZE: usize> Flash<'d, T, FLASH_SIZE> {
} }
} }
}); });
// Resume CORE1 execution
crate::multicore::resume_core1();
Ok(())
} }
} }

View File

@ -5,6 +5,9 @@
// This mod MUST go first, so that the others see its macros. // This mod MUST go first, so that the others see its macros.
pub(crate) mod fmt; pub(crate) mod fmt;
#[cfg(feature = "critical-section-impl")]
mod critical_section_impl;
mod intrinsics; mod intrinsics;
pub mod adc; pub mod adc;
@ -31,6 +34,7 @@ pub mod usb;
pub mod clocks; pub mod clocks;
pub mod flash; pub mod flash;
pub mod multicore;
mod reset; mod reset;
// Reexports // Reexports
@ -111,6 +115,8 @@ embassy_hal_common::peripherals! {
ADC, ADC,
CORE1,
PIO0, PIO0,
PIO1, PIO1,
} }

306
embassy-rp/src/multicore.rs Normal file
View File

@ -0,0 +1,306 @@
//! Multicore support
//!
//! This module handles setup of the 2nd cpu core on the rp2040, which we refer to as core1.
//! It provides functionality for setting up the stack, and starting core1.
//!
//! The entrypoint for core1 can be any function that never returns, including closures.
//!
//! Enable the `critical-section-impl` feature in embassy-rp when sharing data across cores using
//! the `embassy-sync` primitives and `CriticalSectionRawMutex`.
//!
//! # Usage
//! ```no_run
//! static mut CORE1_STACK: Stack<4096> = Stack::new();
//! static EXECUTOR0: StaticCell<Executor> = StaticCell::new();
//! static EXECUTOR1: StaticCell<Executor> = StaticCell::new();
//!
//! #[cortex_m_rt::entry]
//! fn main() -> ! {
//! let p = embassy_rp::init(Default::default());
//!
//! spawn_core1(p.CORE1, unsafe { &mut CORE1_STACK }, move || {
//! let executor1 = EXECUTOR1.init(Executor::new());
//! executor1.run(|spawner| unwrap!(spawner.spawn(core1_task())));
//! });
//!
//! let executor0 = EXECUTOR0.init(Executor::new());
//! executor0.run(|spawner| unwrap!(spawner.spawn(core0_task())));
//! }
//! ```
use core::mem::ManuallyDrop;
use core::sync::atomic::{compiler_fence, Ordering};
use atomic_polyfill::AtomicBool;
use crate::interrupt::{Interrupt, InterruptExt};
use crate::peripherals::CORE1;
use crate::{interrupt, pac};
const PAUSE_TOKEN: u32 = 0xDEADBEEF;
const RESUME_TOKEN: u32 = !0xDEADBEEF;
static IS_CORE1_INIT: AtomicBool = AtomicBool::new(false);
#[inline(always)]
fn install_stack_guard(stack_bottom: *mut usize) {
let core = unsafe { cortex_m::Peripherals::steal() };
// Trap if MPU is already configured
if core.MPU.ctrl.read() != 0 {
cortex_m::asm::udf();
}
// The minimum we can protect is 32 bytes on a 32 byte boundary, so round up which will
// just shorten the valid stack range a tad.
let addr = (stack_bottom as u32 + 31) & !31;
// Mask is 1 bit per 32 bytes of the 256 byte range... clear the bit for the segment we want
let subregion_select = 0xff ^ (1 << ((addr >> 5) & 7));
unsafe {
core.MPU.ctrl.write(5); // enable mpu with background default map
core.MPU.rbar.write((addr & !0xff) | 0x8);
core.MPU.rasr.write(
1 // enable region
| (0x7 << 1) // size 2^(7 + 1) = 256
| (subregion_select << 8)
| 0x10000000, // XN = disable instruction fetch; no other bits means no permissions
);
}
}
#[inline(always)]
fn core1_setup(stack_bottom: *mut usize) {
install_stack_guard(stack_bottom);
}
/// Data type for a properly aligned stack of N bytes
#[repr(C, align(32))]
pub struct Stack<const SIZE: usize> {
/// Memory to be used for the stack
pub mem: [u8; SIZE],
}
impl<const SIZE: usize> Stack<SIZE> {
/// Construct a stack of length SIZE, initialized to 0
pub const fn new() -> Stack<SIZE> {
Stack { mem: [0_u8; SIZE] }
}
}
#[interrupt]
#[link_section = ".data.ram_func"]
unsafe fn SIO_IRQ_PROC1() {
let sio = pac::SIO;
// Clear IRQ
sio.fifo().st().write(|w| w.set_wof(false));
while sio.fifo().st().read().vld() {
// Pause CORE1 execution and disable interrupts
if fifo_read_wfe() == PAUSE_TOKEN {
cortex_m::interrupt::disable();
// Signal to CORE0 that execution is paused
fifo_write(PAUSE_TOKEN);
// Wait for `resume` signal from CORE0
while fifo_read_wfe() != RESUME_TOKEN {
cortex_m::asm::nop();
}
cortex_m::interrupt::enable();
// Signal to CORE0 that execution is resumed
fifo_write(RESUME_TOKEN);
}
}
}
/// Spawn a function on this core
pub fn spawn_core1<F, const SIZE: usize>(_core1: CORE1, stack: &'static mut Stack<SIZE>, entry: F)
where
F: FnOnce() -> bad::Never + Send + 'static,
{
// The first two ignored `u64` parameters are there to take up all of the registers,
// which means that the rest of the arguments are taken from the stack,
// where we're able to put them from core 0.
extern "C" fn core1_startup<F: FnOnce() -> bad::Never>(
_: u64,
_: u64,
entry: &mut ManuallyDrop<F>,
stack_bottom: *mut usize,
) -> ! {
core1_setup(stack_bottom);
let entry = unsafe { ManuallyDrop::take(entry) };
// Signal that it's safe for core 0 to get rid of the original value now.
fifo_write(1);
IS_CORE1_INIT.store(true, Ordering::Release);
// Enable fifo interrupt on CORE1 for `pause` functionality.
let irq = unsafe { interrupt::SIO_IRQ_PROC1::steal() };
irq.enable();
entry()
}
// Reset the core
unsafe {
let psm = pac::PSM;
psm.frce_off().modify(|w| w.set_proc1(true));
while !psm.frce_off().read().proc1() {
cortex_m::asm::nop();
}
psm.frce_off().modify(|w| w.set_proc1(false));
}
let mem = unsafe { core::slice::from_raw_parts_mut(stack.mem.as_mut_ptr() as *mut usize, stack.mem.len() / 4) };
// Set up the stack
let mut stack_ptr = unsafe { mem.as_mut_ptr().add(mem.len()) };
// We don't want to drop this, since it's getting moved to the other core.
let mut entry = ManuallyDrop::new(entry);
// Push the arguments to `core1_startup` onto the stack.
unsafe {
// Push `stack_bottom`.
stack_ptr = stack_ptr.sub(1);
stack_ptr.cast::<*mut usize>().write(mem.as_mut_ptr());
// Push `entry`.
stack_ptr = stack_ptr.sub(1);
stack_ptr.cast::<&mut ManuallyDrop<F>>().write(&mut entry);
}
// Make sure the compiler does not reorder the stack writes after to after the
// below FIFO writes, which would result in them not being seen by the second
// core.
//
// From the compiler perspective, this doesn't guarantee that the second core
// actually sees those writes. However, we know that the RP2040 doesn't have
// memory caches, and writes happen in-order.
compiler_fence(Ordering::Release);
let p = unsafe { cortex_m::Peripherals::steal() };
let vector_table = p.SCB.vtor.read();
// After reset, core 1 is waiting to receive commands over FIFO.
// This is the sequence to have it jump to some code.
let cmd_seq = [
0,
0,
1,
vector_table as usize,
stack_ptr as usize,
core1_startup::<F> as usize,
];
let mut seq = 0;
let mut fails = 0;
loop {
let cmd = cmd_seq[seq] as u32;
if cmd == 0 {
fifo_drain();
cortex_m::asm::sev();
}
fifo_write(cmd);
let response = fifo_read();
if cmd == response {
seq += 1;
} else {
seq = 0;
fails += 1;
if fails > 16 {
// The second core isn't responding, and isn't going to take the entrypoint
panic!("CORE1 not responding");
}
}
if seq >= cmd_seq.len() {
break;
}
}
// Wait until the other core has copied `entry` before returning.
fifo_read();
}
/// Pause execution on CORE1.
pub fn pause_core1() {
if IS_CORE1_INIT.load(Ordering::Acquire) {
fifo_write(PAUSE_TOKEN);
// Wait for CORE1 to signal it has paused execution.
while fifo_read() != PAUSE_TOKEN {}
}
}
/// Resume CORE1 execution.
pub fn resume_core1() {
if IS_CORE1_INIT.load(Ordering::Acquire) {
fifo_write(RESUME_TOKEN);
// Wait for CORE1 to signal it has resumed execution.
while fifo_read() != RESUME_TOKEN {}
}
}
// Push a value to the inter-core FIFO, block until space is available
#[inline(always)]
fn fifo_write(value: u32) {
unsafe {
let sio = pac::SIO;
// Wait for the FIFO to have enough space
while !sio.fifo().st().read().rdy() {
cortex_m::asm::nop();
}
sio.fifo().wr().write_value(value);
}
// Fire off an event to the other core.
// This is required as the other core may be `wfe` (waiting for event)
cortex_m::asm::sev();
}
// Pop a value from inter-core FIFO, block until available
#[inline(always)]
fn fifo_read() -> u32 {
unsafe {
let sio = pac::SIO;
// Wait until FIFO has data
while !sio.fifo().st().read().vld() {
cortex_m::asm::nop();
}
sio.fifo().rd().read()
}
}
// Pop a value from inter-core FIFO, `wfe` until available
#[inline(always)]
fn fifo_read_wfe() -> u32 {
unsafe {
let sio = pac::SIO;
// Wait until FIFO has data
while !sio.fifo().st().read().vld() {
cortex_m::asm::wfe();
}
sio.fifo().rd().read()
}
}
// Drain inter-core FIFO
#[inline(always)]
fn fifo_drain() {
unsafe {
let sio = pac::SIO;
while sio.fifo().st().read().vld() {
let _ = sio.fifo().rd().read();
}
}
}
// https://github.com/nvzqz/bad-rs/blob/master/src/never.rs
mod bad {
pub(crate) type Never = <F as HasOutput>::Output;
pub trait HasOutput {
type Output;
}
impl<O> HasOutput for fn() -> O {
type Output = O;
}
type F = fn() -> !;
}

View File

@ -9,7 +9,7 @@ license = "MIT OR Apache-2.0"
embassy-sync = { version = "0.1.0", path = "../../embassy-sync", features = ["defmt"] } embassy-sync = { version = "0.1.0", path = "../../embassy-sync", features = ["defmt"] }
embassy-executor = { version = "0.1.0", path = "../../embassy-executor", features = ["defmt", "integrated-timers"] } embassy-executor = { version = "0.1.0", path = "../../embassy-executor", features = ["defmt", "integrated-timers"] }
embassy-time = { version = "0.1.0", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime"] } embassy-time = { version = "0.1.0", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime"] }
embassy-rp = { version = "0.1.0", path = "../../embassy-rp", features = ["defmt", "unstable-traits", "nightly", "unstable-pac", "time-driver", "pio"] } embassy-rp = { version = "0.1.0", path = "../../embassy-rp", features = ["defmt", "unstable-traits", "nightly", "unstable-pac", "time-driver", "pio", "critical-section-impl"] }
embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"] } embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"] }
embassy-net = { version = "0.1.0", path = "../../embassy-net", features = ["defmt", "nightly", "tcp", "dhcpv4", "medium-ethernet", "pool-16"] } embassy-net = { version = "0.1.0", path = "../../embassy-net", features = ["defmt", "nightly", "tcp", "dhcpv4", "medium-ethernet", "pool-16"] }
embassy-futures = { version = "0.1.0", path = "../../embassy-futures" } embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }
@ -18,7 +18,8 @@ embassy-usb-logger = { version = "0.1.0", path = "../../embassy-usb-logger" }
defmt = "0.3" defmt = "0.3"
defmt-rtt = "0.4" defmt-rtt = "0.4"
cortex-m = { version = "0.7.6", features = ["critical-section-single-core"] } #cortex-m = { version = "0.7.6", features = ["critical-section-single-core"] }
cortex-m = { version = "0.7.6" }
cortex-m-rt = "0.7.0" cortex-m-rt = "0.7.0"
panic-probe = { version = "0.3", features = ["print-defmt"] } panic-probe = { version = "0.3", features = ["print-defmt"] }
futures = { version = "0.3.17", default-features = false, features = ["async-await", "cfg-target-has-atomic", "unstable"] } futures = { version = "0.3.17", default-features = false, features = ["async-await", "cfg-target-has-atomic", "unstable"] }

View File

@ -0,0 +1,60 @@
#![no_std]
#![no_main]
#![feature(type_alias_impl_trait)]
use defmt::*;
use embassy_executor::Executor;
use embassy_executor::_export::StaticCell;
use embassy_rp::gpio::{Level, Output};
use embassy_rp::multicore::{spawn_core1, Stack};
use embassy_rp::peripherals::PIN_25;
use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex;
use embassy_sync::channel::Channel;
use embassy_time::{Duration, Timer};
use {defmt_rtt as _, panic_probe as _};
static mut CORE1_STACK: Stack<4096> = Stack::new();
static EXECUTOR0: StaticCell<Executor> = StaticCell::new();
static EXECUTOR1: StaticCell<Executor> = StaticCell::new();
static CHANNEL: Channel<CriticalSectionRawMutex, LedState, 1> = Channel::new();
enum LedState {
On,
Off,
}
#[cortex_m_rt::entry]
fn main() -> ! {
let p = embassy_rp::init(Default::default());
let led = Output::new(p.PIN_25, Level::Low);
spawn_core1(p.CORE1, unsafe { &mut CORE1_STACK }, move || {
let executor1 = EXECUTOR1.init(Executor::new());
executor1.run(|spawner| unwrap!(spawner.spawn(core1_task(led))));
});
let executor0 = EXECUTOR0.init(Executor::new());
executor0.run(|spawner| unwrap!(spawner.spawn(core0_task())));
}
#[embassy_executor::task]
async fn core0_task() {
info!("Hello from core 0");
loop {
CHANNEL.send(LedState::On).await;
Timer::after(Duration::from_millis(100)).await;
CHANNEL.send(LedState::Off).await;
Timer::after(Duration::from_millis(400)).await;
}
}
#[embassy_executor::task]
async fn core1_task(mut led: Output<'static, PIN_25>) {
info!("Hello from core 1");
loop {
match CHANNEL.recv().await {
LedState::On => led.set_high(),
LedState::Off => led.set_low(),
}
}
}

View File

@ -8,13 +8,13 @@ license = "MIT OR Apache-2.0"
embassy-sync = { version = "0.1.0", path = "../../embassy-sync", features = ["defmt"] } embassy-sync = { version = "0.1.0", path = "../../embassy-sync", features = ["defmt"] }
embassy-executor = { version = "0.1.0", path = "../../embassy-executor", features = ["defmt", "integrated-timers"] } embassy-executor = { version = "0.1.0", path = "../../embassy-executor", features = ["defmt", "integrated-timers"] }
embassy-time = { version = "0.1.0", path = "../../embassy-time", features = ["defmt"] } embassy-time = { version = "0.1.0", path = "../../embassy-time", features = ["defmt"] }
embassy-rp = { version = "0.1.0", path = "../../embassy-rp", features = ["nightly", "defmt", "unstable-pac", "unstable-traits", "time-driver"] } embassy-rp = { version = "0.1.0", path = "../../embassy-rp", features = ["nightly", "defmt", "unstable-pac", "unstable-traits", "time-driver", "critical-section-impl"] }
embassy-futures = { version = "0.1.0", path = "../../embassy-futures" } embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }
defmt = "0.3.0" defmt = "0.3.0"
defmt-rtt = "0.4" defmt-rtt = "0.4"
cortex-m = { version = "0.7.6", features = ["critical-section-single-core"] } cortex-m = { version = "0.7.6" }
cortex-m-rt = "0.7.0" cortex-m-rt = "0.7.0"
embedded-hal = "0.2.6" embedded-hal = "0.2.6"
embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-alpha.9" } embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-alpha.9" }

View File

@ -0,0 +1,47 @@
#![no_std]
#![no_main]
#![feature(type_alias_impl_trait)]
use defmt::{info, unwrap};
use embassy_executor::Executor;
use embassy_executor::_export::StaticCell;
use embassy_rp::multicore::{spawn_core1, Stack};
use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex;
use embassy_sync::channel::Channel;
use {defmt_rtt as _, panic_probe as _};
static mut CORE1_STACK: Stack<1024> = Stack::new();
static EXECUTOR0: StaticCell<Executor> = StaticCell::new();
static EXECUTOR1: StaticCell<Executor> = StaticCell::new();
static CHANNEL0: Channel<CriticalSectionRawMutex, bool, 1> = Channel::new();
static CHANNEL1: Channel<CriticalSectionRawMutex, bool, 1> = Channel::new();
#[cortex_m_rt::entry]
fn main() -> ! {
let p = embassy_rp::init(Default::default());
spawn_core1(p.CORE1, unsafe { &mut CORE1_STACK }, move || {
let executor1 = EXECUTOR1.init(Executor::new());
executor1.run(|spawner| unwrap!(spawner.spawn(core1_task())));
});
let executor0 = EXECUTOR0.init(Executor::new());
executor0.run(|spawner| unwrap!(spawner.spawn(core0_task())));
}
#[embassy_executor::task]
async fn core0_task() {
info!("CORE0 is running");
let ping = true;
CHANNEL0.send(ping).await;
let pong = CHANNEL1.recv().await;
assert_eq!(ping, pong);
info!("Test OK");
cortex_m::asm::bkpt();
}
#[embassy_executor::task]
async fn core1_task() {
info!("CORE1 is running");
let ping = CHANNEL0.recv().await;
CHANNEL1.send(ping).await;
}