From 545cc9326b47efc27549a60b3539e93ea0d04d70 Mon Sep 17 00:00:00 2001 From: Grant Miller Date: Sun, 23 Oct 2022 16:31:10 -0500 Subject: [PATCH] stm32/adc: Remove voltage and temperature conversions --- embassy-stm32/src/adc/f1.rs | 21 ------------------ embassy-stm32/src/adc/v2.rs | 23 ------------------- embassy-stm32/src/adc/v3.rs | 39 --------------------------------- embassy-stm32/src/adc/v4.rs | 14 ------------ examples/stm32f1/src/bin/adc.rs | 12 ++++++++-- examples/stm32f4/src/bin/adc.rs | 27 ++++++++++++++++++++--- examples/stm32f7/src/bin/adc.rs | 12 +++++++++- 7 files changed, 45 insertions(+), 103 deletions(-) diff --git a/embassy-stm32/src/adc/f1.rs b/embassy-stm32/src/adc/f1.rs index 50d4f9bf..c5b317ce 100644 --- a/embassy-stm32/src/adc/f1.rs +++ b/embassy-stm32/src/adc/f1.rs @@ -86,7 +86,6 @@ pub use sample_time::SampleTime; pub struct Adc<'d, T: Instance> { sample_time: SampleTime, - calibrated_vdda: u32, phantom: PhantomData<&'d mut T>, } @@ -122,7 +121,6 @@ impl<'d, T: Instance> Adc<'d, T> { Self { sample_time: Default::default(), - calibrated_vdda: VDDA_CALIB_MV, phantom: PhantomData, } } @@ -162,29 +160,10 @@ impl<'d, T: Instance> Adc<'d, T> { Temperature {} } - /// Calculates the system VDDA by sampling the internal VREF channel and comparing - /// to the expected value. If the chip's VDDA is not stable, run this before each ADC - /// conversion. - pub fn calibrate(&mut self, vref: &mut Vref) -> u32 { - let old_sample_time = self.sample_time; - self.sample_time = SampleTime::Cycles239_5; - - let vref_samp = self.read(vref); - self.sample_time = old_sample_time; - - self.calibrated_vdda = (ADC_MAX * VREF_INT) / u32::from(vref_samp); - self.calibrated_vdda - } - pub fn set_sample_time(&mut self, sample_time: SampleTime) { self.sample_time = sample_time; } - /// Convert a measurement to millivolts - pub fn to_millivolts(&self, sample: u16) -> u16 { - ((u32::from(sample) * self.calibrated_vdda) / ADC_MAX) as u16 - } - /// Perform a single conversion. fn convert(&mut self) -> u16 { unsafe { diff --git a/embassy-stm32/src/adc/v2.rs b/embassy-stm32/src/adc/v2.rs index 4fe4ad1f..53419c7f 100644 --- a/embassy-stm32/src/adc/v2.rs +++ b/embassy-stm32/src/adc/v2.rs @@ -80,15 +80,6 @@ impl super::sealed::InternalChannel for Temperature { } impl Temperature { - /// Converts temperature sensor reading in millivolts to degrees celcius - pub fn to_celcius(sample_mv: u16) -> f32 { - // From 6.3.22 Temperature sensor characteristics - const V25: i32 = 760; // mV - const AVG_SLOPE: f32 = 2.5; // mV/C - - (sample_mv as i32 - V25) as f32 / AVG_SLOPE + 25.0 - } - /// Time needed for temperature sensor readings to stabilize pub fn start_time_us() -> u32 { 10 @@ -172,7 +163,6 @@ impl Prescaler { pub struct Adc<'d, T: Instance> { sample_time: SampleTime, - vref_mv: u32, resolution: Resolution, phantom: PhantomData<&'d mut T>, } @@ -200,7 +190,6 @@ where Self { sample_time: Default::default(), resolution: Resolution::default(), - vref_mv: VREF_DEFAULT_MV, phantom: PhantomData, } } @@ -213,18 +202,6 @@ where self.resolution = resolution; } - /// Set VREF value in millivolts. This value is used for [to_millivolts()] sample conversion. - /// - /// Use this if you have a known precise VREF (VDDA) pin reference voltage. - pub fn set_vref_mv(&mut self, vref_mv: u32) { - self.vref_mv = vref_mv; - } - - /// Convert a measurement to millivolts - pub fn to_millivolts(&self, sample: u16) -> u16 { - ((u32::from(sample) * self.vref_mv) / self.resolution.to_max_count()) as u16 - } - /// Enables internal voltage reference and returns [VrefInt], which can be used in /// [Adc::read_internal()] to perform conversion. pub fn enable_vrefint(&self) -> VrefInt { diff --git a/embassy-stm32/src/adc/v3.rs b/embassy-stm32/src/adc/v3.rs index 0f109088..816feeac 100644 --- a/embassy-stm32/src/adc/v3.rs +++ b/embassy-stm32/src/adc/v3.rs @@ -205,7 +205,6 @@ pub use sample_time::SampleTime; pub struct Adc<'d, T: Instance> { sample_time: SampleTime, - vref_mv: u32, resolution: Resolution, phantom: PhantomData<&'d mut T>, } @@ -244,7 +243,6 @@ impl<'d, T: Instance> Adc<'d, T> { Self { sample_time: Default::default(), resolution: Resolution::default(), - vref_mv: VREF_DEFAULT_MV, phantom: PhantomData, } } @@ -285,31 +283,6 @@ impl<'d, T: Instance> Adc<'d, T> { Vbat {} } - /// Calculates the system VDDA by sampling the internal VREFINT channel and comparing - /// the result with the value stored at the factory. If the chip's VDDA is not stable, run - /// this before each ADC conversion. - #[cfg(not(stm32g0))] // TODO is this supposed to be public? - #[allow(unused)] // TODO is this supposed to be public? - fn calibrate(&mut self, vrefint: &mut VrefInt) { - #[cfg(stm32l5)] - let vrefint_cal: u32 = todo!(); - #[cfg(not(stm32l5))] - let vrefint_cal = unsafe { crate::pac::VREFINTCAL.data().read().value() }; - let old_sample_time = self.sample_time; - - // "Table 24. Embedded internal voltage reference" states that the sample time needs to be - // at a minimum 4 us. With 640.5 ADC cycles we have a minimum of 8 us at 80 MHz, leaving - // some headroom. - self.sample_time = SampleTime::Cycles640_5; - - // This can't actually fail, it's just in a result to satisfy hal trait - let vrefint_samp = self.read(vrefint); - - self.sample_time = old_sample_time; - - self.vref_mv = (VREF_CALIB_MV * u32::from(vrefint_cal)) / u32::from(vrefint_samp); - } - pub fn set_sample_time(&mut self, sample_time: SampleTime) { self.sample_time = sample_time; } @@ -318,18 +291,6 @@ impl<'d, T: Instance> Adc<'d, T> { self.resolution = resolution; } - /// Set VREF value in millivolts. This value is used for [to_millivolts()] sample conversion. - /// - /// Use this if you have a known precise VREF (VDDA) pin reference voltage. - pub fn set_vref_mv(&mut self, vref_mv: u32) { - self.vref_mv = vref_mv; - } - - /// Convert a measurement to millivolts - pub fn to_millivolts(&self, sample: u16) -> u16 { - ((u32::from(sample) * self.vref_mv) / self.resolution.to_max_count()) as u16 - } - /* /// Convert a raw sample from the `Temperature` to deg C pub fn to_degrees_centigrade(sample: u16) -> f32 { diff --git a/embassy-stm32/src/adc/v4.rs b/embassy-stm32/src/adc/v4.rs index eda2b2a7..2b8f1053 100644 --- a/embassy-stm32/src/adc/v4.rs +++ b/embassy-stm32/src/adc/v4.rs @@ -314,7 +314,6 @@ impl Prescaler { pub struct Adc<'d, T: Instance> { sample_time: SampleTime, - vref_mv: u32, resolution: Resolution, phantom: PhantomData<&'d mut T>, } @@ -352,7 +351,6 @@ impl<'d, T: Instance + crate::rcc::RccPeripheral> Adc<'d, T> { let mut s = Self { sample_time: Default::default(), - vref_mv: VREF_DEFAULT_MV, resolution: Resolution::default(), phantom: PhantomData, }; @@ -459,18 +457,6 @@ impl<'d, T: Instance + crate::rcc::RccPeripheral> Adc<'d, T> { self.resolution = resolution; } - /// Set VREF value in millivolts. This value is used for [to_millivolts()] sample conversion. - /// - /// Use this if you have a known precise VREF (VDDA) pin reference voltage. - pub fn set_vref_mv(&mut self, vref_mv: u32) { - self.vref_mv = vref_mv; - } - - /// Convert a measurement to millivolts - pub fn to_millivolts(&self, sample: u16) -> u16 { - ((u32::from(sample) * self.vref_mv) / self.resolution.to_max_count()) as u16 - } - /// Perform a single conversion. fn convert(&mut self) -> u16 { unsafe { diff --git a/examples/stm32f1/src/bin/adc.rs b/examples/stm32f1/src/bin/adc.rs index 2d6b4a0e..3521d06b 100644 --- a/examples/stm32f1/src/bin/adc.rs +++ b/examples/stm32f1/src/bin/adc.rs @@ -17,10 +17,18 @@ async fn main(_spawner: Spawner) { let mut pin = p.PB1; let mut vref = adc.enable_vref(&mut Delay); - adc.calibrate(&mut vref); + let vref_sample = adc.read(&mut vref); + let convert_to_millivolts = |sample| { + // From http://www.st.com/resource/en/datasheet/CD00161566.pdf + // 5.3.4 Embedded reference voltage + const VREF_MV: u32 = 1200; + + (u32::from(sample) * VREF_MV / u32::from(vref_sample)) as u16 + }; + loop { let v = adc.read(&mut pin); - info!("--> {} - {} mV", v, adc.to_millivolts(v)); + info!("--> {} - {} mV", v, convert_to_millivolts(v)); Timer::after(Duration::from_millis(100)).await; } } diff --git a/examples/stm32f4/src/bin/adc.rs b/examples/stm32f4/src/bin/adc.rs index 1d030f7d..5e036bb4 100644 --- a/examples/stm32f4/src/bin/adc.rs +++ b/examples/stm32f4/src/bin/adc.rs @@ -24,19 +24,40 @@ async fn main(_spawner: Spawner) { // Startup delay can be combined to the maximum of either delay.delay_us(Temperature::start_time_us().max(VrefInt::start_time_us())); + let vref_sample = adc.read_internal(&mut vrefint); + + let convert_to_millivolts = |sample| { + // From http://www.st.com/resource/en/datasheet/DM00071990.pdf + // 6.3.24 Reference voltage + const VREF_MILLIVOLTS: u32 = 1210; // mV + + (u32::from(sample) * VREF_MILLIVOLTS / u32::from(vref_sample)) as u16 + }; + + let convert_to_celcius = |sample| { + // From http://www.st.com/resource/en/datasheet/DM00071990.pdf + // 6.3.22 Temperature sensor characteristics + const V25: i32 = 760; // mV + const AVG_SLOPE: f32 = 2.5; // mV/C + + let sample_mv = convert_to_millivolts(sample) as i32; + + (sample_mv - V25) as f32 / AVG_SLOPE + 25.0 + }; + loop { // Read pin let v = adc.read(&mut pin); - info!("PC1: {} ({} mV)", v, adc.to_millivolts(v)); + info!("PC1: {} ({} mV)", v, convert_to_millivolts(v)); // Read internal temperature let v = adc.read_internal(&mut temp); - let celcius = Temperature::to_celcius(adc.to_millivolts(v)); + let celcius = convert_to_celcius(v); info!("Internal temp: {} ({} C)", v, celcius); // Read internal voltage reference let v = adc.read_internal(&mut vrefint); - info!("VrefInt: {} ({} mV)", v, adc.to_millivolts(v)); + info!("VrefInt: {} ({} mV)", v, convert_to_millivolts(v)); Timer::after(Duration::from_millis(100)).await; } diff --git a/examples/stm32f7/src/bin/adc.rs b/examples/stm32f7/src/bin/adc.rs index 80fad8c4..d932f8b3 100644 --- a/examples/stm32f7/src/bin/adc.rs +++ b/examples/stm32f7/src/bin/adc.rs @@ -16,9 +16,19 @@ async fn main(_spawner: Spawner) { let mut adc = Adc::new(p.ADC1, &mut Delay); let mut pin = p.PA3; + let mut vref = adc.enable_vrefint(); + let vref_sample = adc.read_internal(&mut vref); + let convert_to_millivolts = |sample| { + // From http://www.st.com/resource/en/datasheet/DM00273119.pdf + // 6.3.27 Reference voltage + const VREF_MV: u32 = 1210; + + (u32::from(sample) * VREF_MV / u32::from(vref_sample)) as u16 + }; + loop { let v = adc.read(&mut pin); - info!("--> {} - {} mV", v, adc.to_millivolts(v)); + info!("--> {} - {} mV", v, convert_to_millivolts(v)); Timer::after(Duration::from_millis(100)).await; } }