sync: flatten module structure.

examples/nrf/src/bin/channel.rs

@@ -6,7 +6,7 @@ use defmt::unwrap;
 use embassy_executor::Spawner;
 use embassy_nrf::gpio::{Level, Output, OutputDrive};
 use embassy_sync::blocking_mutex::raw::ThreadModeRawMutex;
-use embassy_sync::channel::mpmc::Channel;
+use embassy_sync::channel::Channel;
 use embassy_time::{Duration, Timer};
 use {defmt_rtt as _, panic_probe as _};
 

examples/nrf/src/bin/channel_sender_receiver.rs

@@ -6,7 +6,7 @@ use defmt::unwrap;
 use embassy_executor::Spawner;
 use embassy_nrf::gpio::{AnyPin, Level, Output, OutputDrive, Pin};
 use embassy_sync::blocking_mutex::raw::NoopRawMutex;
-use embassy_sync::channel::mpmc::{Channel, Receiver, Sender};
+use embassy_sync::channel::{Channel, Receiver, Sender};
 use embassy_time::{Duration, Timer};
 use static_cell::StaticCell;
 use {defmt_rtt as _, panic_probe as _};

examples/nrf/src/bin/pubsub.rs

@@ -5,7 +5,7 @@
 use defmt::unwrap;
 use embassy_executor::Spawner;
 use embassy_sync::blocking_mutex::raw::ThreadModeRawMutex;
-use embassy_sync::channel::pubsub::{DynSubscriber, PubSubChannel, Subscriber};
+use embassy_sync::pubsub::{DynSubscriber, PubSubChannel, Subscriber};
 use embassy_time::{Duration, Timer};
 use {defmt_rtt as _, panic_probe as _};
 

examples/nrf/src/bin/uart_split.rs

@@ -8,7 +8,7 @@ use embassy_nrf::peripherals::UARTE0;
 use embassy_nrf::uarte::UarteRx;
 use embassy_nrf::{interrupt, uarte};
 use embassy_sync::blocking_mutex::raw::ThreadModeRawMutex;
-use embassy_sync::channel::mpmc::Channel;
+use embassy_sync::channel::Channel;
 use {defmt_rtt as _, panic_probe as _};
 
 static CHANNEL: Channel<ThreadModeRawMutex, [u8; 8], 1> = Channel::new();

examples/nrf/src/bin/usb_ethernet.rs

@@ -15,7 +15,7 @@ use embassy_nrf::rng::Rng;
 use embassy_nrf::usb::{Driver, PowerUsb};
 use embassy_nrf::{interrupt, pac, peripherals};
 use embassy_sync::blocking_mutex::raw::ThreadModeRawMutex;
-use embassy_sync::channel::mpmc::Channel;
+use embassy_sync::channel::Channel;
 use embassy_usb::{Builder, Config, UsbDevice};
 use embassy_usb_ncm::{CdcNcmClass, Receiver, Sender, State};
 use embedded_io::asynch::{Read, Write};

examples/nrf/src/bin/usb_hid_keyboard.rs

@@ -12,7 +12,7 @@ use embassy_futures::{select, Either};
 use embassy_nrf::gpio::{Input, Pin, Pull};
 use embassy_nrf::usb::{Driver, PowerUsb};
 use embassy_nrf::{interrupt, pac};
-use embassy_sync::channel::signal::Signal;
+use embassy_sync::signal::Signal;
 use embassy_usb::control::OutResponse;
 use embassy_usb::{Builder, Config, DeviceStateHandler};
 use embassy_usb_hid::{HidReaderWriter, ReportId, RequestHandler, State};

examples/stm32f3/src/bin/button_events.rs

@@ -16,7 +16,7 @@ use embassy_stm32::exti::ExtiInput;
 use embassy_stm32::gpio::{AnyPin, Input, Level, Output, Pin, Pull, Speed};
 use embassy_stm32::peripherals::PA0;
 use embassy_sync::blocking_mutex::raw::ThreadModeRawMutex;
-use embassy_sync::channel::mpmc::Channel;
+use embassy_sync::channel::Channel;
 use embassy_time::{with_timeout, Duration, Timer};
 use {defmt_rtt as _, panic_probe as _};
 

examples/stm32h7/src/bin/signal.rs

@@ -4,7 +4,7 @@
 
 use defmt::{info, unwrap};
 use embassy_executor::Spawner;
-use embassy_sync::channel::signal::Signal;
+use embassy_sync::signal::Signal;
 use embassy_time::{Duration, Timer};
 use {defmt_rtt as _, panic_probe as _};
 

examples/stm32h7/src/bin/usart_split.rs

@@ -8,7 +8,7 @@ use embassy_stm32::dma::NoDma;
 use embassy_stm32::peripherals::{DMA1_CH1, UART7};
 use embassy_stm32::usart::{Config, Uart, UartRx};
 use embassy_sync::blocking_mutex::raw::ThreadModeRawMutex;
-use embassy_sync::channel::mpmc::Channel;
+use embassy_sync::channel::Channel;
 use {defmt_rtt as _, panic_probe as _};
 
 #[embassy_executor::task]

examples/stm32l5/src/bin/usb_ethernet.rs

@@ -16,7 +16,7 @@ use embassy_stm32::time::Hertz;
 use embassy_stm32::usb::Driver;
 use embassy_stm32::{interrupt, Config};
 use embassy_sync::blocking_mutex::raw::ThreadModeRawMutex;
-use embassy_sync::channel::mpmc::Channel;
+use embassy_sync::channel::Channel;
 use embassy_usb::{Builder, UsbDevice};
 use embassy_usb_ncm::{CdcNcmClass, Receiver, Sender, State};
 use embedded_io::asynch::{Read, Write};

examples/stm32wl/src/bin/subghz.rs

@@ -13,7 +13,7 @@ use embassy_stm32::gpio::{Input, Level, Output, Pull, Speed};
 use embassy_stm32::interrupt;
 use embassy_stm32::interrupt::{Interrupt, InterruptExt};
 use embassy_stm32::subghz::*;
-use embassy_sync::channel::signal::Signal;
+use embassy_sync::signal::Signal;
 use {defmt_rtt as _, panic_probe as _};
 
 const PING_DATA: &str = "PING";