856: embassy-stm32/pwm: Generalize channel selection r=Dirbaio a=bgamari

550da471be previously refactored the STM32
PWM logic in such a way to preclude use of non-contiguous channels (e.g.
channel 2 but not channel 1). Refactor it yet again to yet again allow
this sort of usage.

Co-authored-by: Ben Gamari <ben@smart-cactus.org>
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
This commit is contained in:
bors[bot] 2022-07-23 14:16:51 +00:00 committed by GitHub
commit 6b8cd6fbb3
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 54 additions and 65 deletions

View File

@ -1,85 +1,71 @@
use core::marker::PhantomData;
use embassy_hal_common::{into_ref, PeripheralRef};
use super::*;
#[allow(unused_imports)]
use crate::gpio::sealed::{AFType, Pin};
use crate::gpio::AnyPin;
use crate::time::Hertz;
use crate::Peripheral;
pub struct Ch1;
pub struct Ch2;
pub struct Ch3;
pub struct Ch4;
pub struct PwmPin<'d, Perip, Channel> {
_pin: PeripheralRef<'d, AnyPin>,
phantom: PhantomData<(Perip, Channel)>,
}
macro_rules! channel_impl {
($new_chx:ident, $channel:ident, $pin_trait:ident) => {
impl<'d, Perip: CaptureCompare16bitInstance> PwmPin<'d, Perip, $channel> {
pub fn $new_chx(pin: impl Peripheral<P = impl $pin_trait<Perip>> + 'd) -> Self {
into_ref!(pin);
critical_section::with(|_| unsafe {
pin.set_low();
pin.set_as_af(pin.af_num(), AFType::OutputPushPull);
#[cfg(gpio_v2)]
pin.set_speed(crate::gpio::Speed::VeryHigh);
});
PwmPin {
_pin: pin.map_into(),
phantom: PhantomData,
}
}
}
};
}
channel_impl!(new_ch1, Ch1, Channel1Pin);
channel_impl!(new_ch2, Ch2, Channel2Pin);
channel_impl!(new_ch3, Ch3, Channel3Pin);
channel_impl!(new_ch4, Ch4, Channel4Pin);
pub struct SimplePwm<'d, T> {
inner: PeripheralRef<'d, T>,
}
macro_rules! config_pins {
($($pin:ident),*) => {
into_ref!($($pin),*);
// NOTE(unsafe) Exclusive access to the registers
critical_section::with(|_| unsafe {
$(
$pin.set_low();
$pin.set_as_af($pin.af_num(), AFType::OutputPushPull);
#[cfg(gpio_v2)]
$pin.set_speed(crate::gpio::Speed::VeryHigh);
)*
})
};
}
impl<'d, T: CaptureCompare16bitInstance> SimplePwm<'d, T> {
pub fn new_1ch(
pub fn new(
tim: impl Peripheral<P = T> + 'd,
ch1: impl Peripheral<P = impl Channel1Pin<T>> + 'd,
_ch1: Option<PwmPin<'d, T, Ch1>>,
_ch2: Option<PwmPin<'d, T, Ch2>>,
_ch3: Option<PwmPin<'d, T, Ch3>>,
_ch4: Option<PwmPin<'d, T, Ch4>>,
freq: Hertz,
) -> Self {
Self::new_inner(tim, freq, move || {
config_pins!(ch1);
})
Self::new_inner(tim, freq)
}
pub fn new_2ch(
tim: impl Peripheral<P = T> + 'd,
ch1: impl Peripheral<P = impl Channel1Pin<T>> + 'd,
ch2: impl Peripheral<P = impl Channel2Pin<T>> + 'd,
freq: Hertz,
) -> Self {
Self::new_inner(tim, freq, move || {
config_pins!(ch1, ch2);
})
}
pub fn new_3ch(
tim: impl Peripheral<P = T> + 'd,
ch1: impl Peripheral<P = impl Channel1Pin<T>> + 'd,
ch2: impl Peripheral<P = impl Channel2Pin<T>> + 'd,
ch3: impl Peripheral<P = impl Channel3Pin<T>> + 'd,
freq: Hertz,
) -> Self {
Self::new_inner(tim, freq, move || {
config_pins!(ch1, ch2, ch3);
})
}
pub fn new_4ch(
tim: impl Peripheral<P = T> + 'd,
ch1: impl Peripheral<P = impl Channel1Pin<T>> + 'd,
ch2: impl Peripheral<P = impl Channel2Pin<T>> + 'd,
ch3: impl Peripheral<P = impl Channel3Pin<T>> + 'd,
ch4: impl Peripheral<P = impl Channel4Pin<T>> + 'd,
freq: Hertz,
) -> Self {
Self::new_inner(tim, freq, move || {
config_pins!(ch1, ch2, ch3, ch4);
})
}
fn new_inner(tim: impl Peripheral<P = T> + 'd, freq: Hertz, configure_pins: impl FnOnce()) -> Self {
fn new_inner(tim: impl Peripheral<P = T> + 'd, freq: Hertz) -> Self {
into_ref!(tim);
T::enable();
<T as crate::rcc::sealed::RccPeripheral>::reset();
configure_pins();
let mut this = Self { inner: tim };
this.inner.set_frequency(freq);

View File

@ -5,7 +5,7 @@
use defmt::*;
use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_stm32::pwm::simple_pwm::SimplePwm;
use embassy_stm32::pwm::simple_pwm::{PwmPin, SimplePwm};
use embassy_stm32::pwm::Channel;
use embassy_stm32::time::khz;
use embassy_stm32::Peripherals;
@ -15,7 +15,8 @@ use {defmt_rtt as _, panic_probe as _};
async fn main(_spawner: Spawner, p: Peripherals) {
info!("Hello World!");
let mut pwm = SimplePwm::new_1ch(p.TIM1, p.PE9, khz(10));
let ch1 = PwmPin::new_ch1(p.PE9);
let mut pwm = SimplePwm::new(p.TIM1, Some(ch1), None, None, None, khz(10));
let max = pwm.get_max_duty();
pwm.enable(Channel::Ch1);

View File

@ -5,7 +5,7 @@
use defmt::*;
use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_stm32::pwm::simple_pwm::SimplePwm;
use embassy_stm32::pwm::simple_pwm::{PwmPin, SimplePwm};
use embassy_stm32::pwm::Channel;
use embassy_stm32::time::khz;
use embassy_stm32::Peripherals;
@ -15,7 +15,8 @@ use {defmt_rtt as _, panic_probe as _};
async fn main(_spawner: Spawner, p: Peripherals) {
info!("Hello World!");
let mut pwm = SimplePwm::new_1ch(p.TIM2, p.PA5, khz(10));
let ch1 = PwmPin::new_ch1(p.PA5);
let mut pwm = SimplePwm::new(p.TIM2, Some(ch1), None, None, None, khz(10));
let max = pwm.get_max_duty();
pwm.enable(Channel::Ch1);

View File

@ -5,7 +5,7 @@
use defmt::*;
use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_stm32::pwm::simple_pwm::SimplePwm;
use embassy_stm32::pwm::simple_pwm::{PwmPin, SimplePwm};
use embassy_stm32::pwm::Channel;
use embassy_stm32::time::{khz, mhz};
use embassy_stm32::{Config, Peripherals};
@ -27,7 +27,8 @@ pub fn config() -> Config {
async fn main(_spawner: Spawner, p: Peripherals) {
info!("Hello World!");
let mut pwm = SimplePwm::new_1ch(p.TIM3, p.PA6, khz(10));
let ch1 = PwmPin::new_ch1(p.PA6);
let mut pwm = SimplePwm::new(p.TIM3, Some(ch1), None, None, None, khz(10));
let max = pwm.get_max_duty();
pwm.enable(Channel::Ch1);