Add lora-phy examples.

examples/stm32l0/src/bin/lora_lorawan.rs

@@ -0,0 +1,88 @@
+//! This example runs on the STM32 LoRa Discovery board, which has a builtin Semtech Sx1276 radio.
+//! It demonstrates LoRaWAN join functionality.
+#![no_std]
+#![no_main]
+#![macro_use]
+#![feature(type_alias_impl_trait)]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_lora::iv::Stm32l0InterfaceVariant;
+use embassy_lora::LoraTimer;
+use embassy_stm32::exti::{Channel, ExtiInput};
+use embassy_stm32::gpio::{Input, Level, Output, Pin, Pull, Speed};
+use embassy_stm32::rng::Rng;
+use embassy_stm32::spi;
+use embassy_stm32::time::khz;
+use embassy_time::Delay;
+use lora_phy::mod_params::*;
+use lora_phy::sx1276_7_8_9::SX1276_7_8_9;
+use lora_phy::LoRa;
+use lorawan::default_crypto::DefaultFactory as Crypto;
+use lorawan_device::async_device::lora_radio::LoRaRadio;
+use lorawan_device::async_device::{region, Device, JoinMode};
+use {defmt_rtt as _, panic_probe as _};
+
+const LORAWAN_REGION: region::Region = region::Region::EU868; // warning: set this appropriately for the region
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let mut config = embassy_stm32::Config::default();
+    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSI16;
+    config.rcc.enable_hsi48 = true;
+    let p = embassy_stm32::init(config);
+
+    // SPI for sx1276
+    let spi = spi::Spi::new(
+        p.SPI1,
+        p.PB3,
+        p.PA7,
+        p.PA6,
+        p.DMA1_CH3,
+        p.DMA1_CH2,
+        khz(200),
+        spi::Config::default(),
+    );
+
+    let nss = Output::new(p.PA15.degrade(), Level::High, Speed::Low);
+    let reset = Output::new(p.PC0.degrade(), Level::High, Speed::Low);
+
+    let irq_pin = Input::new(p.PB4.degrade(), Pull::Up);
+    let irq = ExtiInput::new(irq_pin, p.EXTI4.degrade());
+
+    let iv = Stm32l0InterfaceVariant::new(nss, reset, irq, None, None).unwrap();
+
+    let mut delay = Delay;
+
+    let lora = {
+        match LoRa::new(SX1276_7_8_9::new(BoardType::Stm32l0Sx1276, spi, iv), true, &mut delay).await {
+            Ok(l) => l,
+            Err(err) => {
+                info!("Radio error = {}", err);
+                return;
+            }
+        }
+    };
+
+    let radio = LoRaRadio::new(lora);
+    let region: region::Configuration = region::Configuration::new(LORAWAN_REGION);
+    let mut device: Device<_, Crypto, _, _> = Device::new(region, radio, LoraTimer::new(), Rng::new(p.RNG));
+
+    defmt::info!("Joining LoRaWAN network");
+
+    // TODO: Adjust the EUI and Keys according to your network credentials
+    match device
+        .join(&JoinMode::OTAA {
+            deveui: [0, 0, 0, 0, 0, 0, 0, 0],
+            appeui: [0, 0, 0, 0, 0, 0, 0, 0],
+            appkey: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
+        })
+        .await
+    {
+        Ok(()) => defmt::info!("LoRaWAN network joined"),
+        Err(err) => {
+            info!("Radio error = {}", err);
+            return;
+        }
+    };
+}