diff --git a/embassy-stm32/src/pac/regs.rs b/embassy-stm32/src/pac/regs.rs
index 7b24a5d0..db2ba6f8 100644
--- a/embassy-stm32/src/pac/regs.rs
+++ b/embassy-stm32/src/pac/regs.rs
@@ -1,2526 +1,2124 @@
 #![no_std]
 #![doc = "Peripheral access API (generated using svd2rust v0.17.0 (22741fa 2021-04-20))"]
-pub mod gpio_v2 {
+pub mod rcc_l0 {
     use crate::generic::*;
-    #[doc = "General-purpose I/Os"]
+    #[doc = "Reset and clock control"]
     #[derive(Copy, Clone)]
-    pub struct Gpio(pub *mut u8);
-    unsafe impl Send for Gpio {}
-    unsafe impl Sync for Gpio {}
-    impl Gpio {
-        #[doc = "GPIO port mode register"]
-        pub fn moder(self) -> Reg<regs::Moder, RW> {
+    pub struct Rcc(pub *mut u8);
+    unsafe impl Send for Rcc {}
+    unsafe impl Sync for Rcc {}
+    impl Rcc {
+        #[doc = "Clock control register"]
+        pub fn cr(self) -> Reg<regs::Cr, RW> {
             unsafe { Reg::from_ptr(self.0.add(0usize)) }
         }
-        #[doc = "GPIO port output type register"]
-        pub fn otyper(self) -> Reg<regs::Otyper, RW> {
+        #[doc = "Internal clock sources calibration register"]
+        pub fn icscr(self) -> Reg<regs::Icscr, RW> {
             unsafe { Reg::from_ptr(self.0.add(4usize)) }
         }
-        #[doc = "GPIO port output speed register"]
-        pub fn ospeedr(self) -> Reg<regs::Ospeedr, RW> {
+        #[doc = "Clock recovery RC register"]
+        pub fn crrcr(self) -> Reg<regs::Crrcr, RW> {
             unsafe { Reg::from_ptr(self.0.add(8usize)) }
         }
-        #[doc = "GPIO port pull-up/pull-down register"]
-        pub fn pupdr(self) -> Reg<regs::Pupdr, RW> {
+        #[doc = "Clock configuration register"]
+        pub fn cfgr(self) -> Reg<regs::Cfgr, RW> {
             unsafe { Reg::from_ptr(self.0.add(12usize)) }
         }
-        #[doc = "GPIO port input data register"]
-        pub fn idr(self) -> Reg<regs::Idr, R> {
+        #[doc = "Clock interrupt enable register"]
+        pub fn cier(self) -> Reg<regs::Cier, R> {
             unsafe { Reg::from_ptr(self.0.add(16usize)) }
         }
-        #[doc = "GPIO port output data register"]
-        pub fn odr(self) -> Reg<regs::Odr, RW> {
+        #[doc = "Clock interrupt flag register"]
+        pub fn cifr(self) -> Reg<regs::Cifr, R> {
             unsafe { Reg::from_ptr(self.0.add(20usize)) }
         }
-        #[doc = "GPIO port bit set/reset register"]
-        pub fn bsrr(self) -> Reg<regs::Bsrr, W> {
+        #[doc = "Clock interrupt clear register"]
+        pub fn cicr(self) -> Reg<regs::Cicr, R> {
             unsafe { Reg::from_ptr(self.0.add(24usize)) }
         }
-        #[doc = "GPIO port configuration lock register"]
-        pub fn lckr(self) -> Reg<regs::Lckr, RW> {
+        #[doc = "GPIO reset register"]
+        pub fn ioprstr(self) -> Reg<regs::Ioprstr, RW> {
             unsafe { Reg::from_ptr(self.0.add(28usize)) }
         }
-        #[doc = "GPIO alternate function register (low, high)"]
-        pub fn afr(self, n: usize) -> Reg<regs::Afr, RW> {
-            assert!(n < 2usize);
-            unsafe { Reg::from_ptr(self.0.add(32usize + n * 4usize)) }
-        }
-    }
-    pub mod regs {
-        use crate::generic::*;
-        #[doc = "GPIO port output data register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Odr(pub u32);
-        impl Odr {
-            #[doc = "Port output data (y = 0..15)"]
-            pub fn odr(&self, n: usize) -> super::vals::Odr {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Odr(val as u8)
-            }
-            #[doc = "Port output data (y = 0..15)"]
-            pub fn set_odr(&mut self, n: usize, val: super::vals::Odr) {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Odr {
-            fn default() -> Odr {
-                Odr(0)
-            }
-        }
-        #[doc = "GPIO port bit set/reset register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Bsrr(pub u32);
-        impl Bsrr {
-            #[doc = "Port x set bit y (y= 0..15)"]
-            pub fn bs(&self, n: usize) -> bool {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Port x set bit y (y= 0..15)"]
-            pub fn set_bs(&mut self, n: usize, val: bool) {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Port x set bit y (y= 0..15)"]
-            pub fn br(&self, n: usize) -> bool {
-                assert!(n < 16usize);
-                let offs = 16usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Port x set bit y (y= 0..15)"]
-            pub fn set_br(&mut self, n: usize, val: bool) {
-                assert!(n < 16usize);
-                let offs = 16usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Bsrr {
-            fn default() -> Bsrr {
-                Bsrr(0)
-            }
-        }
-        #[doc = "GPIO port configuration lock register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Lckr(pub u32);
-        impl Lckr {
-            #[doc = "Port x lock bit y (y= 0..15)"]
-            pub fn lck(&self, n: usize) -> super::vals::Lck {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Lck(val as u8)
-            }
-            #[doc = "Port x lock bit y (y= 0..15)"]
-            pub fn set_lck(&mut self, n: usize, val: super::vals::Lck) {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-            #[doc = "Port x lock bit y (y= 0..15)"]
-            pub const fn lckk(&self) -> super::vals::Lckk {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Lckk(val as u8)
-            }
-            #[doc = "Port x lock bit y (y= 0..15)"]
-            pub fn set_lckk(&mut self, val: super::vals::Lckk) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-        }
-        impl Default for Lckr {
-            fn default() -> Lckr {
-                Lckr(0)
-            }
-        }
-        #[doc = "GPIO port output type register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Otyper(pub u32);
-        impl Otyper {
-            #[doc = "Port x configuration bits (y = 0..15)"]
-            pub fn ot(&self, n: usize) -> super::vals::Ot {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Ot(val as u8)
-            }
-            #[doc = "Port x configuration bits (y = 0..15)"]
-            pub fn set_ot(&mut self, n: usize, val: super::vals::Ot) {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Otyper {
-            fn default() -> Otyper {
-                Otyper(0)
-            }
-        }
-        #[doc = "GPIO port input data register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Idr(pub u32);
-        impl Idr {
-            #[doc = "Port input data (y = 0..15)"]
-            pub fn idr(&self, n: usize) -> super::vals::Idr {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Idr(val as u8)
-            }
-            #[doc = "Port input data (y = 0..15)"]
-            pub fn set_idr(&mut self, n: usize, val: super::vals::Idr) {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Idr {
-            fn default() -> Idr {
-                Idr(0)
-            }
-        }
-        #[doc = "GPIO port mode register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Moder(pub u32);
-        impl Moder {
-            #[doc = "Port x configuration bits (y = 0..15)"]
-            pub fn moder(&self, n: usize) -> super::vals::Moder {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 2usize;
-                let val = (self.0 >> offs) & 0x03;
-                super::vals::Moder(val as u8)
-            }
-            #[doc = "Port x configuration bits (y = 0..15)"]
-            pub fn set_moder(&mut self, n: usize, val: super::vals::Moder) {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 2usize;
-                self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs);
-            }
-        }
-        impl Default for Moder {
-            fn default() -> Moder {
-                Moder(0)
-            }
-        }
-        #[doc = "GPIO alternate function register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Afr(pub u32);
-        impl Afr {
-            #[doc = "Alternate function selection for port x bit y (y = 0..15)"]
-            pub fn afr(&self, n: usize) -> super::vals::Afr {
-                assert!(n < 8usize);
-                let offs = 0usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x0f;
-                super::vals::Afr(val as u8)
-            }
-            #[doc = "Alternate function selection for port x bit y (y = 0..15)"]
-            pub fn set_afr(&mut self, n: usize, val: super::vals::Afr) {
-                assert!(n < 8usize);
-                let offs = 0usize + n * 4usize;
-                self.0 = (self.0 & !(0x0f << offs)) | (((val.0 as u32) & 0x0f) << offs);
-            }
-        }
-        impl Default for Afr {
-            fn default() -> Afr {
-                Afr(0)
-            }
-        }
-        #[doc = "GPIO port output speed register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ospeedr(pub u32);
-        impl Ospeedr {
-            #[doc = "Port x configuration bits (y = 0..15)"]
-            pub fn ospeedr(&self, n: usize) -> super::vals::Ospeedr {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 2usize;
-                let val = (self.0 >> offs) & 0x03;
-                super::vals::Ospeedr(val as u8)
-            }
-            #[doc = "Port x configuration bits (y = 0..15)"]
-            pub fn set_ospeedr(&mut self, n: usize, val: super::vals::Ospeedr) {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 2usize;
-                self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs);
-            }
-        }
-        impl Default for Ospeedr {
-            fn default() -> Ospeedr {
-                Ospeedr(0)
-            }
-        }
-        #[doc = "GPIO port pull-up/pull-down register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Pupdr(pub u32);
-        impl Pupdr {
-            #[doc = "Port x configuration bits (y = 0..15)"]
-            pub fn pupdr(&self, n: usize) -> super::vals::Pupdr {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 2usize;
-                let val = (self.0 >> offs) & 0x03;
-                super::vals::Pupdr(val as u8)
-            }
-            #[doc = "Port x configuration bits (y = 0..15)"]
-            pub fn set_pupdr(&mut self, n: usize, val: super::vals::Pupdr) {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 2usize;
-                self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs);
-            }
-        }
-        impl Default for Pupdr {
-            fn default() -> Pupdr {
-                Pupdr(0)
-            }
-        }
-    }
-    pub mod vals {
-        use crate::generic::*;
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lckk(pub u8);
-        impl Lckk {
-            #[doc = "Port configuration lock key not active"]
-            pub const NOTACTIVE: Self = Self(0);
-            #[doc = "Port configuration lock key active"]
-            pub const ACTIVE: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Afr(pub u8);
-        impl Afr {
-            #[doc = "AF0"]
-            pub const AF0: Self = Self(0);
-            #[doc = "AF1"]
-            pub const AF1: Self = Self(0x01);
-            #[doc = "AF2"]
-            pub const AF2: Self = Self(0x02);
-            #[doc = "AF3"]
-            pub const AF3: Self = Self(0x03);
-            #[doc = "AF4"]
-            pub const AF4: Self = Self(0x04);
-            #[doc = "AF5"]
-            pub const AF5: Self = Self(0x05);
-            #[doc = "AF6"]
-            pub const AF6: Self = Self(0x06);
-            #[doc = "AF7"]
-            pub const AF7: Self = Self(0x07);
-            #[doc = "AF8"]
-            pub const AF8: Self = Self(0x08);
-            #[doc = "AF9"]
-            pub const AF9: Self = Self(0x09);
-            #[doc = "AF10"]
-            pub const AF10: Self = Self(0x0a);
-            #[doc = "AF11"]
-            pub const AF11: Self = Self(0x0b);
-            #[doc = "AF12"]
-            pub const AF12: Self = Self(0x0c);
-            #[doc = "AF13"]
-            pub const AF13: Self = Self(0x0d);
-            #[doc = "AF14"]
-            pub const AF14: Self = Self(0x0e);
-            #[doc = "AF15"]
-            pub const AF15: Self = Self(0x0f);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Pupdr(pub u8);
-        impl Pupdr {
-            #[doc = "No pull-up, pull-down"]
-            pub const FLOATING: Self = Self(0);
-            #[doc = "Pull-up"]
-            pub const PULLUP: Self = Self(0x01);
-            #[doc = "Pull-down"]
-            pub const PULLDOWN: Self = Self(0x02);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lck(pub u8);
-        impl Lck {
-            #[doc = "Port configuration not locked"]
-            pub const UNLOCKED: Self = Self(0);
-            #[doc = "Port configuration locked"]
-            pub const LOCKED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Bsw(pub u8);
-        impl Bsw {
-            #[doc = "Sets the corresponding ODRx bit"]
-            pub const SET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ospeedr(pub u8);
-        impl Ospeedr {
-            #[doc = "Low speed"]
-            pub const LOWSPEED: Self = Self(0);
-            #[doc = "Medium speed"]
-            pub const MEDIUMSPEED: Self = Self(0x01);
-            #[doc = "High speed"]
-            pub const HIGHSPEED: Self = Self(0x02);
-            #[doc = "Very high speed"]
-            pub const VERYHIGHSPEED: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Brw(pub u8);
-        impl Brw {
-            #[doc = "Resets the corresponding ODRx bit"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Moder(pub u8);
-        impl Moder {
-            #[doc = "Input mode (reset state)"]
-            pub const INPUT: Self = Self(0);
-            #[doc = "General purpose output mode"]
-            pub const OUTPUT: Self = Self(0x01);
-            #[doc = "Alternate function mode"]
-            pub const ALTERNATE: Self = Self(0x02);
-            #[doc = "Analog mode"]
-            pub const ANALOG: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Odr(pub u8);
-        impl Odr {
-            #[doc = "Set output to logic low"]
-            pub const LOW: Self = Self(0);
-            #[doc = "Set output to logic high"]
-            pub const HIGH: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Idr(pub u8);
-        impl Idr {
-            #[doc = "Input is logic low"]
-            pub const LOW: Self = Self(0);
-            #[doc = "Input is logic high"]
-            pub const HIGH: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ot(pub u8);
-        impl Ot {
-            #[doc = "Output push-pull (reset state)"]
-            pub const PUSHPULL: Self = Self(0);
-            #[doc = "Output open-drain"]
-            pub const OPENDRAIN: Self = Self(0x01);
-        }
-    }
-}
-pub mod syscfg_l4 {
-    use crate::generic::*;
-    #[doc = "System configuration controller"]
-    #[derive(Copy, Clone)]
-    pub struct Syscfg(pub *mut u8);
-    unsafe impl Send for Syscfg {}
-    unsafe impl Sync for Syscfg {}
-    impl Syscfg {
-        #[doc = "memory remap register"]
-        pub fn memrmp(self) -> Reg<regs::Memrmp, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "configuration register 1"]
-        pub fn cfgr1(self) -> Reg<regs::Cfgr1, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "external interrupt configuration register 1"]
-        pub fn exticr(self, n: usize) -> Reg<regs::Exticr, RW> {
-            assert!(n < 4usize);
-            unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) }
-        }
-        #[doc = "SCSR"]
-        pub fn scsr(self) -> Reg<regs::Scsr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(24usize)) }
-        }
-        #[doc = "CFGR2"]
-        pub fn cfgr2(self) -> Reg<regs::Cfgr2, RW> {
-            unsafe { Reg::from_ptr(self.0.add(28usize)) }
-        }
-        #[doc = "SWPR"]
-        pub fn swpr(self) -> Reg<regs::Swpr, W> {
+        #[doc = "AHB peripheral reset register"]
+        pub fn ahbrstr(self) -> Reg<regs::Ahbrstr, RW> {
             unsafe { Reg::from_ptr(self.0.add(32usize)) }
         }
-        #[doc = "SKR"]
-        pub fn skr(self) -> Reg<regs::Skr, W> {
+        #[doc = "APB2 peripheral reset register"]
+        pub fn apb2rstr(self) -> Reg<regs::Apb2rstr, RW> {
             unsafe { Reg::from_ptr(self.0.add(36usize)) }
         }
-    }
-    pub mod regs {
-        use crate::generic::*;
-        #[doc = "SWPR"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Swpr(pub u32);
-        impl Swpr {
-            #[doc = "SRAWM2 write protection."]
-            pub fn pwp(&self, n: usize) -> bool {
-                assert!(n < 32usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "SRAWM2 write protection."]
-            pub fn set_pwp(&mut self, n: usize, val: bool) {
-                assert!(n < 32usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Swpr {
-            fn default() -> Swpr {
-                Swpr(0)
-            }
-        }
-        #[doc = "external interrupt configuration register 4"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Exticr(pub u32);
-        impl Exticr {
-            #[doc = "EXTI12 configuration bits"]
-            pub fn exti(&self, n: usize) -> u8 {
-                assert!(n < 4usize);
-                let offs = 0usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x0f;
-                val as u8
-            }
-            #[doc = "EXTI12 configuration bits"]
-            pub fn set_exti(&mut self, n: usize, val: u8) {
-                assert!(n < 4usize);
-                let offs = 0usize + n * 4usize;
-                self.0 = (self.0 & !(0x0f << offs)) | (((val as u32) & 0x0f) << offs);
-            }
-        }
-        impl Default for Exticr {
-            fn default() -> Exticr {
-                Exticr(0)
-            }
-        }
-        #[doc = "memory remap register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Memrmp(pub u32);
-        impl Memrmp {
-            #[doc = "Memory mapping selection"]
-            pub const fn mem_mode(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0x07;
-                val as u8
-            }
-            #[doc = "Memory mapping selection"]
-            pub fn set_mem_mode(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x07 << 0usize)) | (((val as u32) & 0x07) << 0usize);
-            }
-            #[doc = "QUADSPI memory mapping swap"]
-            pub const fn qfs(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "QUADSPI memory mapping swap"]
-            pub fn set_qfs(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Flash Bank mode selection"]
-            pub const fn fb_mode(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Flash Bank mode selection"]
-            pub fn set_fb_mode(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-        }
-        impl Default for Memrmp {
-            fn default() -> Memrmp {
-                Memrmp(0)
-            }
-        }
-        #[doc = "CFGR2"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cfgr2(pub u32);
-        impl Cfgr2 {
-            #[doc = "Cortex LOCKUP (Hardfault) output enable bit"]
-            pub const fn cll(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Cortex LOCKUP (Hardfault) output enable bit"]
-            pub fn set_cll(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "SRAM2 parity lock bit"]
-            pub const fn spl(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SRAM2 parity lock bit"]
-            pub fn set_spl(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "PVD lock enable bit"]
-            pub const fn pvdl(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "PVD lock enable bit"]
-            pub fn set_pvdl(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "ECC Lock"]
-            pub const fn eccl(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "ECC Lock"]
-            pub fn set_eccl(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "SRAM2 parity error flag"]
-            pub const fn spf(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SRAM2 parity error flag"]
-            pub fn set_spf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-        }
-        impl Default for Cfgr2 {
-            fn default() -> Cfgr2 {
-                Cfgr2(0)
-            }
-        }
-        #[doc = "SCSR"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Scsr(pub u32);
-        impl Scsr {
-            #[doc = "SRAM2 Erase"]
-            pub const fn sram2er(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SRAM2 Erase"]
-            pub fn set_sram2er(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "SRAM2 busy by erase operation"]
-            pub const fn sram2bsy(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SRAM2 busy by erase operation"]
-            pub fn set_sram2bsy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-        }
-        impl Default for Scsr {
-            fn default() -> Scsr {
-                Scsr(0)
-            }
-        }
-        #[doc = "configuration register 1"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cfgr1(pub u32);
-        impl Cfgr1 {
-            #[doc = "Firewall disable"]
-            pub const fn fwdis(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Firewall disable"]
-            pub fn set_fwdis(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "I/O analog switch voltage booster enable"]
-            pub const fn boosten(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "I/O analog switch voltage booster enable"]
-            pub fn set_boosten(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB6"]
-            pub const fn i2c_pb6_fmp(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB6"]
-            pub fn set_i2c_pb6_fmp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
-            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB7"]
-            pub const fn i2c_pb7_fmp(&self) -> bool {
-                let val = (self.0 >> 17usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB7"]
-            pub fn set_i2c_pb7_fmp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
-            }
-            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB8"]
-            pub const fn i2c_pb8_fmp(&self) -> bool {
-                let val = (self.0 >> 18usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB8"]
-            pub fn set_i2c_pb8_fmp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize);
-            }
-            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB9"]
-            pub const fn i2c_pb9_fmp(&self) -> bool {
-                let val = (self.0 >> 19usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB9"]
-            pub fn set_i2c_pb9_fmp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize);
-            }
-            #[doc = "I2C1 Fast-mode Plus driving capability activation"]
-            pub const fn i2c1_fmp(&self) -> bool {
-                let val = (self.0 >> 20usize) & 0x01;
-                val != 0
-            }
-            #[doc = "I2C1 Fast-mode Plus driving capability activation"]
-            pub fn set_i2c1_fmp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
-            }
-            #[doc = "I2C2 Fast-mode Plus driving capability activation"]
-            pub const fn i2c2_fmp(&self) -> bool {
-                let val = (self.0 >> 21usize) & 0x01;
-                val != 0
-            }
-            #[doc = "I2C2 Fast-mode Plus driving capability activation"]
-            pub fn set_i2c2_fmp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
-            }
-            #[doc = "I2C3 Fast-mode Plus driving capability activation"]
-            pub const fn i2c3_fmp(&self) -> bool {
-                let val = (self.0 >> 22usize) & 0x01;
-                val != 0
-            }
-            #[doc = "I2C3 Fast-mode Plus driving capability activation"]
-            pub fn set_i2c3_fmp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
-            }
-            #[doc = "Floating Point Unit interrupts enable bits"]
-            pub const fn fpu_ie(&self) -> u8 {
-                let val = (self.0 >> 26usize) & 0x3f;
-                val as u8
-            }
-            #[doc = "Floating Point Unit interrupts enable bits"]
-            pub fn set_fpu_ie(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x3f << 26usize)) | (((val as u32) & 0x3f) << 26usize);
-            }
-        }
-        impl Default for Cfgr1 {
-            fn default() -> Cfgr1 {
-                Cfgr1(0)
-            }
-        }
-        #[doc = "SKR"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Skr(pub u32);
-        impl Skr {
-            #[doc = "SRAM2 write protection key for software erase"]
-            pub const fn key(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0xff;
-                val as u8
-            }
-            #[doc = "SRAM2 write protection key for software erase"]
-            pub fn set_key(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
-            }
-        }
-        impl Default for Skr {
-            fn default() -> Skr {
-                Skr(0)
-            }
-        }
-    }
-}
-pub mod pwr_h7 {
-    use crate::generic::*;
-    #[doc = "PWR"]
-    #[derive(Copy, Clone)]
-    pub struct Pwr(pub *mut u8);
-    unsafe impl Send for Pwr {}
-    unsafe impl Sync for Pwr {}
-    impl Pwr {
-        #[doc = "PWR control register 1"]
-        pub fn cr1(self) -> Reg<regs::Cr1, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "PWR control status register 1"]
-        pub fn csr1(self) -> Reg<regs::Csr1, R> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "This register is not reset by wakeup from Standby mode, RESET signal and VDD POR. It is only reset by VSW POR and VSWRST reset. This register shall not be accessed when VSWRST bit in RCC_BDCR register resets the VSW domain.After reset, PWR_CR2 register is write-protected. Prior to modifying its content, the DBP bit in PWR_CR1 register must be set to disable the write protection."]
-        pub fn cr2(self) -> Reg<regs::Cr2, RW> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
-        }
-        #[doc = "Reset only by POR only, not reset by wakeup from Standby mode and RESET pad. The lower byte of this register is written once after POR and shall be written before changing VOS level or ck_sys clock frequency. No limitation applies to the upper bytes.Programming data corresponding to an invalid combination of SDLEVEL, SDEXTHP, SDEN, LDOEN and BYPASS bits (see Table9) will be ignored: data will not be written, the written-once mechanism will lock the register and any further write access will be ignored. The default supply configuration will be kept and the ACTVOSRDY bit in PWR control status register 1 (PWR_CSR1) will go on indicating invalid voltage levels. The system shall be power cycled before writing a new value."]
-        pub fn cr3(self) -> Reg<regs::Cr3, RW> {
-            unsafe { Reg::from_ptr(self.0.add(12usize)) }
-        }
-        #[doc = "This register allows controlling CPU1 power."]
-        pub fn cpucr(self) -> Reg<regs::Cpucr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(16usize)) }
-        }
-        #[doc = "This register allows controlling D3 domain power.Following reset VOSRDY will be read 1 by software"]
-        pub fn d3cr(self) -> Reg<regs::D3cr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(24usize)) }
-        }
-        #[doc = "reset only by system reset, not reset by wakeup from Standby mode5 wait states are required when writing this register (when clearing a WKUPF bit in PWR_WKUPFR, the AHB write access will complete after the WKUPF has been cleared)."]
-        pub fn wkupcr(self) -> Reg<regs::Wkupcr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(32usize)) }
-        }
-        #[doc = "reset only by system reset, not reset by wakeup from Standby mode"]
-        pub fn wkupfr(self) -> Reg<regs::Wkupfr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(36usize)) }
-        }
-        #[doc = "Reset only by system reset, not reset by wakeup from Standby mode"]
-        pub fn wkupepr(self) -> Reg<regs::Wkupepr, RW> {
+        #[doc = "APB1 peripheral reset register"]
+        pub fn apb1rstr(self) -> Reg<regs::Apb1rstr, RW> {
             unsafe { Reg::from_ptr(self.0.add(40usize)) }
         }
-    }
-    pub mod regs {
-        use crate::generic::*;
-        #[doc = "reset only by system reset, not reset by wakeup from Standby mode5 wait states are required when writing this register (when clearing a WKUPF bit in PWR_WKUPFR, the AHB write access will complete after the WKUPF has been cleared)."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Wkupcr(pub u32);
-        impl Wkupcr {
-            #[doc = "Clear Wakeup pin flag for WKUP. These bits are always read as 0."]
-            pub const fn wkupc(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0x3f;
-                val as u8
-            }
-            #[doc = "Clear Wakeup pin flag for WKUP. These bits are always read as 0."]
-            pub fn set_wkupc(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x3f << 0usize)) | (((val as u32) & 0x3f) << 0usize);
-            }
+        #[doc = "GPIO clock enable register"]
+        pub fn iopenr(self) -> Reg<regs::Iopenr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(44usize)) }
         }
-        impl Default for Wkupcr {
-            fn default() -> Wkupcr {
-                Wkupcr(0)
-            }
+        #[doc = "AHB peripheral clock enable register"]
+        pub fn ahbenr(self) -> Reg<regs::Ahbenr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(48usize)) }
         }
-        #[doc = "PWR control status register 1"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Csr1(pub u32);
-        impl Csr1 {
-            #[doc = "Programmable voltage detect output This bit is set and cleared by hardware. It is valid only if the PVD has been enabled by the PVDE bit. Note: since the PVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the PVDE bit is set."]
-            pub const fn pvdo(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Programmable voltage detect output This bit is set and cleared by hardware. It is valid only if the PVD has been enabled by the PVDE bit. Note: since the PVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the PVDE bit is set."]
-            pub fn set_pvdo(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Voltage levels ready bit for currently used VOS and SDLEVEL This bit is set to 1 by hardware when the voltage regulator and the SD converter are both disabled and Bypass mode is selected in PWR control register 3 (PWR_CR3)."]
-            pub const fn actvosrdy(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Voltage levels ready bit for currently used VOS and SDLEVEL This bit is set to 1 by hardware when the voltage regulator and the SD converter are both disabled and Bypass mode is selected in PWR control register 3 (PWR_CR3)."]
-            pub fn set_actvosrdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
-            }
-            #[doc = "VOS currently applied for VCORE voltage scaling selection. These bits reflect the last VOS value applied to the PMU."]
-            pub const fn actvos(&self) -> u8 {
-                let val = (self.0 >> 14usize) & 0x03;
-                val as u8
-            }
-            #[doc = "VOS currently applied for VCORE voltage scaling selection. These bits reflect the last VOS value applied to the PMU."]
-            pub fn set_actvos(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 14usize)) | (((val as u32) & 0x03) << 14usize);
-            }
-            #[doc = "Analog voltage detector output on VDDA This bit is set and cleared by hardware. It is valid only if AVD on VDDA is enabled by the AVDEN bit. Note: Since the AVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the AVDEN bit is set."]
-            pub const fn avdo(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Analog voltage detector output on VDDA This bit is set and cleared by hardware. It is valid only if AVD on VDDA is enabled by the AVDEN bit. Note: Since the AVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the AVDEN bit is set."]
-            pub fn set_avdo(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
+        #[doc = "APB2 peripheral clock enable register"]
+        pub fn apb2enr(self) -> Reg<regs::Apb2enr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(52usize)) }
         }
-        impl Default for Csr1 {
-            fn default() -> Csr1 {
-                Csr1(0)
-            }
+        #[doc = "APB1 peripheral clock enable register"]
+        pub fn apb1enr(self) -> Reg<regs::Apb1enr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(56usize)) }
         }
-        #[doc = "This register allows controlling D3 domain power.Following reset VOSRDY will be read 1 by software"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct D3cr(pub u32);
-        impl D3cr {
-            #[doc = "VOS Ready bit for VCORE voltage scaling output selection. This bit is set to 1 by hardware when Bypass mode is selected in PWR control register 3 (PWR_CR3)."]
-            pub const fn vosrdy(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
-                val != 0
-            }
-            #[doc = "VOS Ready bit for VCORE voltage scaling output selection. This bit is set to 1 by hardware when Bypass mode is selected in PWR control register 3 (PWR_CR3)."]
-            pub fn set_vosrdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
-            }
-            #[doc = "Voltage scaling selection according to performance These bits control the VCORE voltage level and allow to obtains the best trade-off between power consumption and performance: When increasing the performance, the voltage scaling shall be changed before increasing the system frequency. When decreasing performance, the system frequency shall first be decreased before changing the voltage scaling."]
-            pub const fn vos(&self) -> u8 {
-                let val = (self.0 >> 14usize) & 0x03;
-                val as u8
-            }
-            #[doc = "Voltage scaling selection according to performance These bits control the VCORE voltage level and allow to obtains the best trade-off between power consumption and performance: When increasing the performance, the voltage scaling shall be changed before increasing the system frequency. When decreasing performance, the system frequency shall first be decreased before changing the voltage scaling."]
-            pub fn set_vos(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 14usize)) | (((val as u32) & 0x03) << 14usize);
-            }
+        #[doc = "GPIO clock enable in sleep mode register"]
+        pub fn iopsmen(self) -> Reg<regs::Iopsmen, RW> {
+            unsafe { Reg::from_ptr(self.0.add(60usize)) }
         }
-        impl Default for D3cr {
-            fn default() -> D3cr {
-                D3cr(0)
-            }
+        #[doc = "AHB peripheral clock enable in sleep mode register"]
+        pub fn ahbsmenr(self) -> Reg<regs::Ahbsmenr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(64usize)) }
         }
-        #[doc = "Reset only by system reset, not reset by wakeup from Standby mode"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Wkupepr(pub u32);
-        impl Wkupepr {
-            #[doc = "Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge."]
-            pub fn wkupen(&self, n: usize) -> bool {
-                assert!(n < 6usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge."]
-            pub fn set_wkupen(&mut self, n: usize, val: bool) {
-                assert!(n < 6usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin."]
-            pub fn wkupp(&self, n: usize) -> bool {
-                assert!(n < 6usize);
-                let offs = 8usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin."]
-            pub fn set_wkupp(&mut self, n: usize, val: bool) {
-                assert!(n < 6usize);
-                let offs = 8usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Wakeup pin pull configuration"]
-            pub fn wkuppupd(&self, n: usize) -> u8 {
-                assert!(n < 6usize);
-                let offs = 16usize + n * 2usize;
-                let val = (self.0 >> offs) & 0x03;
-                val as u8
-            }
-            #[doc = "Wakeup pin pull configuration"]
-            pub fn set_wkuppupd(&mut self, n: usize, val: u8) {
-                assert!(n < 6usize);
-                let offs = 16usize + n * 2usize;
-                self.0 = (self.0 & !(0x03 << offs)) | (((val as u32) & 0x03) << offs);
-            }
+        #[doc = "APB2 peripheral clock enable in sleep mode register"]
+        pub fn apb2smenr(self) -> Reg<regs::Apb2smenr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(68usize)) }
         }
-        impl Default for Wkupepr {
-            fn default() -> Wkupepr {
-                Wkupepr(0)
-            }
+        #[doc = "APB1 peripheral clock enable in sleep mode register"]
+        pub fn apb1smenr(self) -> Reg<regs::Apb1smenr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(72usize)) }
         }
-        #[doc = "This register is not reset by wakeup from Standby mode, RESET signal and VDD POR. It is only reset by VSW POR and VSWRST reset. This register shall not be accessed when VSWRST bit in RCC_BDCR register resets the VSW domain.After reset, PWR_CR2 register is write-protected. Prior to modifying its content, the DBP bit in PWR_CR1 register must be set to disable the write protection."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr2(pub u32);
-        impl Cr2 {
-            #[doc = "Backup regulator enable When set, the Backup regulator (used to maintain the backup RAM content in Standby and VBAT modes) is enabled. If BREN is reset, the backup regulator is switched off. The backup RAM can still be used in Run and Stop modes. However, its content will be lost in Standby and VBAT modes. If BREN is set, the application must wait till the Backup Regulator Ready flag (BRRDY) is set to indicate that the data written into the SRAM will be maintained in Standby and VBAT modes."]
-            pub const fn bren(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Backup regulator enable When set, the Backup regulator (used to maintain the backup RAM content in Standby and VBAT modes) is enabled. If BREN is reset, the backup regulator is switched off. The backup RAM can still be used in Run and Stop modes. However, its content will be lost in Standby and VBAT modes. If BREN is set, the application must wait till the Backup Regulator Ready flag (BRRDY) is set to indicate that the data written into the SRAM will be maintained in Standby and VBAT modes."]
-            pub fn set_bren(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "VBAT and temperature monitoring enable When set, the VBAT supply and temperature monitoring is enabled."]
-            pub const fn monen(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "VBAT and temperature monitoring enable When set, the VBAT supply and temperature monitoring is enabled."]
-            pub fn set_monen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Backup regulator ready This bit is set by hardware to indicate that the Backup regulator is ready."]
-            pub const fn brrdy(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Backup regulator ready This bit is set by hardware to indicate that the Backup regulator is ready."]
-            pub fn set_brrdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
-            #[doc = "VBAT level monitoring versus low threshold"]
-            pub const fn vbatl(&self) -> bool {
-                let val = (self.0 >> 20usize) & 0x01;
-                val != 0
-            }
-            #[doc = "VBAT level monitoring versus low threshold"]
-            pub fn set_vbatl(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
-            }
-            #[doc = "VBAT level monitoring versus high threshold"]
-            pub const fn vbath(&self) -> bool {
-                let val = (self.0 >> 21usize) & 0x01;
-                val != 0
-            }
-            #[doc = "VBAT level monitoring versus high threshold"]
-            pub fn set_vbath(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
-            }
-            #[doc = "Temperature level monitoring versus low threshold"]
-            pub const fn templ(&self) -> bool {
-                let val = (self.0 >> 22usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Temperature level monitoring versus low threshold"]
-            pub fn set_templ(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
-            }
-            #[doc = "Temperature level monitoring versus high threshold"]
-            pub const fn temph(&self) -> bool {
-                let val = (self.0 >> 23usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Temperature level monitoring versus high threshold"]
-            pub fn set_temph(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
-            }
+        #[doc = "Clock configuration register"]
+        pub fn ccipr(self) -> Reg<regs::Ccipr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(76usize)) }
         }
-        impl Default for Cr2 {
-            fn default() -> Cr2 {
-                Cr2(0)
-            }
-        }
-        #[doc = "Reset only by POR only, not reset by wakeup from Standby mode and RESET pad. The lower byte of this register is written once after POR and shall be written before changing VOS level or ck_sys clock frequency. No limitation applies to the upper bytes.Programming data corresponding to an invalid combination of SDLEVEL, SDEXTHP, SDEN, LDOEN and BYPASS bits (see Table9) will be ignored: data will not be written, the written-once mechanism will lock the register and any further write access will be ignored. The default supply configuration will be kept and the ACTVOSRDY bit in PWR control status register 1 (PWR_CSR1) will go on indicating invalid voltage levels. The system shall be power cycled before writing a new value."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr3(pub u32);
-        impl Cr3 {
-            #[doc = "Power management unit bypass"]
-            pub const fn bypass(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Power management unit bypass"]
-            pub fn set_bypass(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Low drop-out regulator enable"]
-            pub const fn ldoen(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Low drop-out regulator enable"]
-            pub fn set_ldoen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "SD converter Enable"]
-            pub const fn scuen(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SD converter Enable"]
-            pub fn set_scuen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "VBAT charging enable"]
-            pub const fn vbe(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "VBAT charging enable"]
-            pub fn set_vbe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "VBAT charging resistor selection"]
-            pub const fn vbrs(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "VBAT charging resistor selection"]
-            pub fn set_vbrs(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "VDD33USB voltage level detector enable."]
-            pub const fn usb33den(&self) -> bool {
-                let val = (self.0 >> 24usize) & 0x01;
-                val != 0
-            }
-            #[doc = "VDD33USB voltage level detector enable."]
-            pub fn set_usb33den(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize);
-            }
-            #[doc = "USB regulator enable."]
-            pub const fn usbregen(&self) -> bool {
-                let val = (self.0 >> 25usize) & 0x01;
-                val != 0
-            }
-            #[doc = "USB regulator enable."]
-            pub fn set_usbregen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize);
-            }
-            #[doc = "USB supply ready."]
-            pub const fn usb33rdy(&self) -> bool {
-                let val = (self.0 >> 26usize) & 0x01;
-                val != 0
-            }
-            #[doc = "USB supply ready."]
-            pub fn set_usb33rdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
-            }
-        }
-        impl Default for Cr3 {
-            fn default() -> Cr3 {
-                Cr3(0)
-            }
-        }
-        #[doc = "reset only by system reset, not reset by wakeup from Standby mode"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Wkupfr(pub u32);
-        impl Wkupfr {
-            #[doc = "Wakeup pin WKUPF flag. This bit is set by hardware and cleared only by a Reset pin or by setting the WKUPCn+1 bit in the PWR wakeup clear register (PWR_WKUPCR)."]
-            pub fn wkupf(&self, n: usize) -> bool {
-                assert!(n < 6usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Wakeup pin WKUPF flag. This bit is set by hardware and cleared only by a Reset pin or by setting the WKUPCn+1 bit in the PWR wakeup clear register (PWR_WKUPCR)."]
-            pub fn set_wkupf(&mut self, n: usize, val: bool) {
-                assert!(n < 6usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Wkupfr {
-            fn default() -> Wkupfr {
-                Wkupfr(0)
-            }
-        }
-        #[doc = "PWR control register 1"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr1(pub u32);
-        impl Cr1 {
-            #[doc = "Low-power Deepsleep with SVOS3 (SVOS4 and SVOS5 always use low-power, regardless of the setting of this bit)"]
-            pub const fn lpds(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Low-power Deepsleep with SVOS3 (SVOS4 and SVOS5 always use low-power, regardless of the setting of this bit)"]
-            pub fn set_lpds(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Programmable voltage detector enable"]
-            pub const fn pvde(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Programmable voltage detector enable"]
-            pub fn set_pvde(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Programmable voltage detector level selection These bits select the voltage threshold detected by the PVD. Note: Refer to Section Electrical characteristics of the product datasheet for more details."]
-            pub const fn pls(&self) -> u8 {
-                let val = (self.0 >> 5usize) & 0x07;
-                val as u8
-            }
-            #[doc = "Programmable voltage detector level selection These bits select the voltage threshold detected by the PVD. Note: Refer to Section Electrical characteristics of the product datasheet for more details."]
-            pub fn set_pls(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x07 << 5usize)) | (((val as u32) & 0x07) << 5usize);
-            }
-            #[doc = "Disable backup domain write protection In reset state, the RCC_BDCR register, the RTC registers (including the backup registers), BREN and MOEN bits in PWR_CR2 register, are protected against parasitic write access. This bit must be set to enable write access to these registers."]
-            pub const fn dbp(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Disable backup domain write protection In reset state, the RCC_BDCR register, the RTC registers (including the backup registers), BREN and MOEN bits in PWR_CR2 register, are protected against parasitic write access. This bit must be set to enable write access to these registers."]
-            pub fn set_dbp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Flash low-power mode in DStop mode This bit allows to obtain the best trade-off between low-power consumption and restart time when exiting from DStop mode. When it is set, the Flash memory enters low-power mode when D1 domain is in DStop mode."]
-            pub const fn flps(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Flash low-power mode in DStop mode This bit allows to obtain the best trade-off between low-power consumption and restart time when exiting from DStop mode. When it is set, the Flash memory enters low-power mode when D1 domain is in DStop mode."]
-            pub fn set_flps(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "System Stop mode voltage scaling selection These bits control the VCORE voltage level in system Stop mode, to obtain the best trade-off between power consumption and performance."]
-            pub const fn svos(&self) -> u8 {
-                let val = (self.0 >> 14usize) & 0x03;
-                val as u8
-            }
-            #[doc = "System Stop mode voltage scaling selection These bits control the VCORE voltage level in system Stop mode, to obtain the best trade-off between power consumption and performance."]
-            pub fn set_svos(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 14usize)) | (((val as u32) & 0x03) << 14usize);
-            }
-            #[doc = "Peripheral voltage monitor on VDDA enable"]
-            pub const fn avden(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Peripheral voltage monitor on VDDA enable"]
-            pub fn set_avden(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
-            #[doc = "Analog voltage detector level selection These bits select the voltage threshold detected by the AVD."]
-            pub const fn als(&self) -> u8 {
-                let val = (self.0 >> 17usize) & 0x03;
-                val as u8
-            }
-            #[doc = "Analog voltage detector level selection These bits select the voltage threshold detected by the AVD."]
-            pub fn set_als(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 17usize)) | (((val as u32) & 0x03) << 17usize);
-            }
-        }
-        impl Default for Cr1 {
-            fn default() -> Cr1 {
-                Cr1(0)
-            }
-        }
-        #[doc = "This register allows controlling CPU1 power."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cpucr(pub u32);
-        impl Cpucr {
-            #[doc = "D1 domain Power Down Deepsleep selection. This bit allows CPU1 to define the Deepsleep mode for D1 domain."]
-            pub const fn pdds_d1(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "D1 domain Power Down Deepsleep selection. This bit allows CPU1 to define the Deepsleep mode for D1 domain."]
-            pub fn set_pdds_d1(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "D2 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for D2 domain."]
-            pub const fn pdds_d2(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "D2 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for D2 domain."]
-            pub fn set_pdds_d2(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "System D3 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for System D3 domain."]
-            pub const fn pdds_d3(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "System D3 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for System D3 domain."]
-            pub fn set_pdds_d3(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "STOP flag This bit is set by hardware and cleared only by any reset or by setting the CPU1 CSSF bit."]
-            pub const fn stopf(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "STOP flag This bit is set by hardware and cleared only by any reset or by setting the CPU1 CSSF bit."]
-            pub fn set_stopf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "System Standby flag This bit is set by hardware and cleared only by a POR (Power-on Reset) or by setting the CPU1 CSSF bit"]
-            pub const fn sbf(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "System Standby flag This bit is set by hardware and cleared only by a POR (Power-on Reset) or by setting the CPU1 CSSF bit"]
-            pub fn set_sbf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "D1 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D1 domain is no longer in DStandby mode."]
-            pub const fn sbf_d1(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "D1 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D1 domain is no longer in DStandby mode."]
-            pub fn set_sbf_d1(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "D2 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D2 domain is no longer in DStandby mode."]
-            pub const fn sbf_d2(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "D2 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D2 domain is no longer in DStandby mode."]
-            pub fn set_sbf_d2(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Clear D1 domain CPU1 Standby, Stop and HOLD flags (always read as 0) This bit is cleared to 0 by hardware."]
-            pub const fn cssf(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Clear D1 domain CPU1 Standby, Stop and HOLD flags (always read as 0) This bit is cleared to 0 by hardware."]
-            pub fn set_cssf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "Keep system D3 domain in Run mode regardless of the CPU sub-systems modes"]
-            pub const fn run_d3(&self) -> bool {
-                let val = (self.0 >> 11usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Keep system D3 domain in Run mode regardless of the CPU sub-systems modes"]
-            pub fn set_run_d3(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
-            }
-        }
-        impl Default for Cpucr {
-            fn default() -> Cpucr {
-                Cpucr(0)
-            }
-        }
-    }
-}
-pub mod i2c_v2 {
-    use crate::generic::*;
-    #[doc = "Inter-integrated circuit"]
-    #[derive(Copy, Clone)]
-    pub struct I2c(pub *mut u8);
-    unsafe impl Send for I2c {}
-    unsafe impl Sync for I2c {}
-    impl I2c {
-        #[doc = "Control register 1"]
-        pub fn cr1(self) -> Reg<regs::Cr1, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "Control register 2"]
-        pub fn cr2(self) -> Reg<regs::Cr2, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "Own address register 1"]
-        pub fn oar1(self) -> Reg<regs::Oar1, RW> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
-        }
-        #[doc = "Own address register 2"]
-        pub fn oar2(self) -> Reg<regs::Oar2, RW> {
-            unsafe { Reg::from_ptr(self.0.add(12usize)) }
-        }
-        #[doc = "Timing register"]
-        pub fn timingr(self) -> Reg<regs::Timingr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(16usize)) }
-        }
-        #[doc = "Status register 1"]
-        pub fn timeoutr(self) -> Reg<regs::Timeoutr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(20usize)) }
-        }
-        #[doc = "Interrupt and Status register"]
-        pub fn isr(self) -> Reg<regs::Isr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(24usize)) }
-        }
-        #[doc = "Interrupt clear register"]
-        pub fn icr(self) -> Reg<regs::Icr, W> {
-            unsafe { Reg::from_ptr(self.0.add(28usize)) }
-        }
-        #[doc = "PEC register"]
-        pub fn pecr(self) -> Reg<regs::Pecr, R> {
-            unsafe { Reg::from_ptr(self.0.add(32usize)) }
-        }
-        #[doc = "Receive data register"]
-        pub fn rxdr(self) -> Reg<regs::Rxdr, R> {
-            unsafe { Reg::from_ptr(self.0.add(36usize)) }
-        }
-        #[doc = "Transmit data register"]
-        pub fn txdr(self) -> Reg<regs::Txdr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(40usize)) }
-        }
-    }
-    pub mod vals {
-        use crate::generic::*;
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct RdWrn(pub u8);
-        impl RdWrn {
-            #[doc = "Master requests a write transfer"]
-            pub const WRITE: Self = Self(0);
-            #[doc = "Master requests a read transfer"]
-            pub const READ: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Pecerr(pub u8);
-        impl Pecerr {
-            #[doc = "Received PEC does match with PEC register"]
-            pub const MATCH: Self = Self(0);
-            #[doc = "Received PEC does not match with PEC register"]
-            pub const NOMATCH: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Oamsk(pub u8);
-        impl Oamsk {
-            #[doc = "No mask"]
-            pub const NOMASK: Self = Self(0);
-            #[doc = "OA2[1]
-is masked and don’t care. Only OA2[7:2]
-are compared"]
-            pub const MASK1: Self = Self(0x01);
-            #[doc = "OA2[2:1]
-are masked and don’t care. Only OA2[7:3]
-are compared"]
-            pub const MASK2: Self = Self(0x02);
-            #[doc = "OA2[3:1]
-are masked and don’t care. Only OA2[7:4]
-are compared"]
-            pub const MASK3: Self = Self(0x03);
-            #[doc = "OA2[4:1]
-are masked and don’t care. Only OA2[7:5]
-are compared"]
-            pub const MASK4: Self = Self(0x04);
-            #[doc = "OA2[5:1]
-are masked and don’t care. Only OA2[7:6]
-are compared"]
-            pub const MASK5: Self = Self(0x05);
-            #[doc = "OA2[6:1]
-are masked and don’t care. Only OA2[7]
-is compared."]
-            pub const MASK6: Self = Self(0x06);
-            #[doc = "OA2[7:1]
-are masked and don’t care. No comparison is done, and all (except reserved) 7-bit received addresses are acknowledged"]
-            pub const MASK7: Self = Self(0x07);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Dnf(pub u8);
-        impl Dnf {
-            #[doc = "Digital filter disabled"]
-            pub const NOFILTER: Self = Self(0);
-            #[doc = "Digital filter enabled and filtering capability up to 1 tI2CCLK"]
-            pub const FILTER1: Self = Self(0x01);
-            #[doc = "Digital filter enabled and filtering capability up to 2 tI2CCLK"]
-            pub const FILTER2: Self = Self(0x02);
-            #[doc = "Digital filter enabled and filtering capability up to 3 tI2CCLK"]
-            pub const FILTER3: Self = Self(0x03);
-            #[doc = "Digital filter enabled and filtering capability up to 4 tI2CCLK"]
-            pub const FILTER4: Self = Self(0x04);
-            #[doc = "Digital filter enabled and filtering capability up to 5 tI2CCLK"]
-            pub const FILTER5: Self = Self(0x05);
-            #[doc = "Digital filter enabled and filtering capability up to 6 tI2CCLK"]
-            pub const FILTER6: Self = Self(0x06);
-            #[doc = "Digital filter enabled and filtering capability up to 7 tI2CCLK"]
-            pub const FILTER7: Self = Self(0x07);
-            #[doc = "Digital filter enabled and filtering capability up to 8 tI2CCLK"]
-            pub const FILTER8: Self = Self(0x08);
-            #[doc = "Digital filter enabled and filtering capability up to 9 tI2CCLK"]
-            pub const FILTER9: Self = Self(0x09);
-            #[doc = "Digital filter enabled and filtering capability up to 10 tI2CCLK"]
-            pub const FILTER10: Self = Self(0x0a);
-            #[doc = "Digital filter enabled and filtering capability up to 11 tI2CCLK"]
-            pub const FILTER11: Self = Self(0x0b);
-            #[doc = "Digital filter enabled and filtering capability up to 12 tI2CCLK"]
-            pub const FILTER12: Self = Self(0x0c);
-            #[doc = "Digital filter enabled and filtering capability up to 13 tI2CCLK"]
-            pub const FILTER13: Self = Self(0x0d);
-            #[doc = "Digital filter enabled and filtering capability up to 14 tI2CCLK"]
-            pub const FILTER14: Self = Self(0x0e);
-            #[doc = "Digital filter enabled and filtering capability up to 15 tI2CCLK"]
-            pub const FILTER15: Self = Self(0x0f);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Dir(pub u8);
-        impl Dir {
-            #[doc = "Write transfer, slave enters receiver mode"]
-            pub const WRITE: Self = Self(0);
-            #[doc = "Read transfer, slave enters transmitter mode"]
-            pub const READ: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Headr(pub u8);
-        impl Headr {
-            #[doc = "The master sends the complete 10 bit slave address read sequence"]
-            pub const COMPLETE: Self = Self(0);
-            #[doc = "The master only sends the 1st 7 bits of the 10 bit address, followed by Read direction"]
-            pub const PARTIAL: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Pecbyte(pub u8);
-        impl Pecbyte {
-            #[doc = "No PEC transfer"]
-            pub const NOPEC: Self = Self(0);
-            #[doc = "PEC transmission/reception is requested"]
-            pub const PEC: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Oamode(pub u8);
-        impl Oamode {
-            #[doc = "Own address 1 is a 7-bit address"]
-            pub const BIT7: Self = Self(0);
-            #[doc = "Own address 1 is a 10-bit address"]
-            pub const BIT10: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Stop(pub u8);
-        impl Stop {
-            #[doc = "No Stop generation"]
-            pub const NOSTOP: Self = Self(0);
-            #[doc = "Stop generation after current byte transfer"]
-            pub const STOP: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Autoend(pub u8);
-        impl Autoend {
-            #[doc = "Software end mode: TC flag is set when NBYTES data are transferred, stretching SCL low"]
-            pub const SOFTWARE: Self = Self(0);
-            #[doc = "Automatic end mode: a STOP condition is automatically sent when NBYTES data are transferred"]
-            pub const AUTOMATIC: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Add(pub u8);
-        impl Add {
-            #[doc = "The master operates in 7-bit addressing mode"]
-            pub const BIT7: Self = Self(0);
-            #[doc = "The master operates in 10-bit addressing mode"]
-            pub const BIT10: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Reload(pub u8);
-        impl Reload {
-            #[doc = "The transfer is completed after the NBYTES data transfer (STOP or RESTART will follow)"]
-            pub const COMPLETED: Self = Self(0);
-            #[doc = "The transfer is not completed after the NBYTES data transfer (NBYTES will be reloaded)"]
-            pub const NOTCOMPLETED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Nack(pub u8);
-        impl Nack {
-            #[doc = "an ACK is sent after current received byte"]
-            pub const ACK: Self = Self(0);
-            #[doc = "a NACK is sent after current received byte"]
-            pub const NACK: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Start(pub u8);
-        impl Start {
-            #[doc = "No Start generation"]
-            pub const NOSTART: Self = Self(0);
-            #[doc = "Restart/Start generation"]
-            pub const START: Self = Self(0x01);
+        #[doc = "Control and status register"]
+        pub fn csr(self) -> Reg<regs::Csr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(80usize)) }
         }
     }
     pub mod regs {
         use crate::generic::*;
-        #[doc = "Own address register 2"]
+        #[doc = "APB1 peripheral clock enable register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Oar2(pub u32);
-        impl Oar2 {
-            #[doc = "Interface address"]
-            pub const fn oa2(&self) -> u8 {
-                let val = (self.0 >> 1usize) & 0x7f;
-                val as u8
-            }
-            #[doc = "Interface address"]
-            pub fn set_oa2(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x7f << 1usize)) | (((val as u32) & 0x7f) << 1usize);
-            }
-            #[doc = "Own Address 2 masks"]
-            pub const fn oa2msk(&self) -> super::vals::Oamsk {
-                let val = (self.0 >> 8usize) & 0x07;
-                super::vals::Oamsk(val as u8)
-            }
-            #[doc = "Own Address 2 masks"]
-            pub fn set_oa2msk(&mut self, val: super::vals::Oamsk) {
-                self.0 = (self.0 & !(0x07 << 8usize)) | (((val.0 as u32) & 0x07) << 8usize);
-            }
-            #[doc = "Own Address 2 enable"]
-            pub const fn oa2en(&self) -> bool {
-                let val = (self.0 >> 15usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Own Address 2 enable"]
-            pub fn set_oa2en(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
-            }
-        }
-        impl Default for Oar2 {
-            fn default() -> Oar2 {
-                Oar2(0)
-            }
-        }
-        #[doc = "Control register 1"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr1(pub u32);
-        impl Cr1 {
-            #[doc = "Peripheral enable"]
-            pub const fn pe(&self) -> bool {
+        pub struct Apb1enr(pub u32);
+        impl Apb1enr {
+            #[doc = "Timer2 clock enable bit"]
+            pub const fn tim2en(&self) -> super::vals::Lptimen {
                 let val = (self.0 >> 0usize) & 0x01;
-                val != 0
+                super::vals::Lptimen(val as u8)
             }
-            #[doc = "Peripheral enable"]
-            pub fn set_pe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            #[doc = "Timer2 clock enable bit"]
+            pub fn set_tim2en(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
             }
-            #[doc = "TX Interrupt enable"]
-            pub const fn txie(&self) -> bool {
+            #[doc = "Timer3 clock enable bit"]
+            pub const fn tim3en(&self) -> super::vals::Lptimen {
                 let val = (self.0 >> 1usize) & 0x01;
-                val != 0
+                super::vals::Lptimen(val as u8)
             }
-            #[doc = "TX Interrupt enable"]
-            pub fn set_txie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            #[doc = "Timer3 clock enable bit"]
+            pub fn set_tim3en(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
             }
-            #[doc = "RX Interrupt enable"]
-            pub const fn rxie(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "RX Interrupt enable"]
-            pub fn set_rxie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Address match interrupt enable (slave only)"]
-            pub const fn addrie(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Address match interrupt enable (slave only)"]
-            pub fn set_addrie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Not acknowledge received interrupt enable"]
-            pub const fn nackie(&self) -> bool {
+            #[doc = "Timer 6 clock enable bit"]
+            pub const fn tim6en(&self) -> super::vals::Lptimen {
                 let val = (self.0 >> 4usize) & 0x01;
-                val != 0
+                super::vals::Lptimen(val as u8)
             }
-            #[doc = "Not acknowledge received interrupt enable"]
-            pub fn set_nackie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            #[doc = "Timer 6 clock enable bit"]
+            pub fn set_tim6en(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
             }
-            #[doc = "STOP detection Interrupt enable"]
-            pub const fn stopie(&self) -> bool {
+            #[doc = "Timer 7 clock enable bit"]
+            pub const fn tim7en(&self) -> super::vals::Lptimen {
                 let val = (self.0 >> 5usize) & 0x01;
-                val != 0
+                super::vals::Lptimen(val as u8)
             }
-            #[doc = "STOP detection Interrupt enable"]
-            pub fn set_stopie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            #[doc = "Timer 7 clock enable bit"]
+            pub fn set_tim7en(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
             }
-            #[doc = "Transfer Complete interrupt enable"]
-            pub const fn tcie(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transfer Complete interrupt enable"]
-            pub fn set_tcie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Error interrupts enable"]
-            pub const fn errie(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Error interrupts enable"]
-            pub fn set_errie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Digital noise filter"]
-            pub const fn dnf(&self) -> super::vals::Dnf {
-                let val = (self.0 >> 8usize) & 0x0f;
-                super::vals::Dnf(val as u8)
-            }
-            #[doc = "Digital noise filter"]
-            pub fn set_dnf(&mut self, val: super::vals::Dnf) {
-                self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize);
-            }
-            #[doc = "Analog noise filter OFF"]
-            pub const fn anfoff(&self) -> bool {
-                let val = (self.0 >> 12usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Analog noise filter OFF"]
-            pub fn set_anfoff(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
-            }
-            #[doc = "DMA transmission requests enable"]
-            pub const fn txdmaen(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DMA transmission requests enable"]
-            pub fn set_txdmaen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
-            }
-            #[doc = "DMA reception requests enable"]
-            pub const fn rxdmaen(&self) -> bool {
-                let val = (self.0 >> 15usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DMA reception requests enable"]
-            pub fn set_rxdmaen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
-            }
-            #[doc = "Slave byte control"]
-            pub const fn sbc(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Slave byte control"]
-            pub fn set_sbc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
-            #[doc = "Clock stretching disable"]
-            pub const fn nostretch(&self) -> bool {
-                let val = (self.0 >> 17usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Clock stretching disable"]
-            pub fn set_nostretch(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
-            }
-            #[doc = "General call enable"]
-            pub const fn gcen(&self) -> bool {
-                let val = (self.0 >> 19usize) & 0x01;
-                val != 0
-            }
-            #[doc = "General call enable"]
-            pub fn set_gcen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize);
-            }
-            #[doc = "SMBus Host address enable"]
-            pub const fn smbhen(&self) -> bool {
-                let val = (self.0 >> 20usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SMBus Host address enable"]
-            pub fn set_smbhen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
-            }
-            #[doc = "SMBus Device Default address enable"]
-            pub const fn smbden(&self) -> bool {
-                let val = (self.0 >> 21usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SMBus Device Default address enable"]
-            pub fn set_smbden(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
-            }
-            #[doc = "SMBUS alert enable"]
-            pub const fn alerten(&self) -> bool {
-                let val = (self.0 >> 22usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SMBUS alert enable"]
-            pub fn set_alerten(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
-            }
-            #[doc = "PEC enable"]
-            pub const fn pecen(&self) -> bool {
-                let val = (self.0 >> 23usize) & 0x01;
-                val != 0
-            }
-            #[doc = "PEC enable"]
-            pub fn set_pecen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
-            }
-        }
-        impl Default for Cr1 {
-            fn default() -> Cr1 {
-                Cr1(0)
-            }
-        }
-        #[doc = "Own address register 1"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Oar1(pub u32);
-        impl Oar1 {
-            #[doc = "Interface address"]
-            pub const fn oa1(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x03ff;
-                val as u16
-            }
-            #[doc = "Interface address"]
-            pub fn set_oa1(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x03ff << 0usize)) | (((val as u32) & 0x03ff) << 0usize);
-            }
-            #[doc = "Own Address 1 10-bit mode"]
-            pub const fn oa1mode(&self) -> super::vals::Oamode {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Oamode(val as u8)
-            }
-            #[doc = "Own Address 1 10-bit mode"]
-            pub fn set_oa1mode(&mut self, val: super::vals::Oamode) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "Own Address 1 enable"]
-            pub const fn oa1en(&self) -> bool {
-                let val = (self.0 >> 15usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Own Address 1 enable"]
-            pub fn set_oa1en(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
-            }
-        }
-        impl Default for Oar1 {
-            fn default() -> Oar1 {
-                Oar1(0)
-            }
-        }
-        #[doc = "PEC register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Pecr(pub u32);
-        impl Pecr {
-            #[doc = "Packet error checking register"]
-            pub const fn pec(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0xff;
-                val as u8
-            }
-            #[doc = "Packet error checking register"]
-            pub fn set_pec(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
-            }
-        }
-        impl Default for Pecr {
-            fn default() -> Pecr {
-                Pecr(0)
-            }
-        }
-        #[doc = "Status register 1"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Timeoutr(pub u32);
-        impl Timeoutr {
-            #[doc = "Bus timeout A"]
-            pub const fn timeouta(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x0fff;
-                val as u16
-            }
-            #[doc = "Bus timeout A"]
-            pub fn set_timeouta(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
-            }
-            #[doc = "Idle clock timeout detection"]
-            pub const fn tidle(&self) -> bool {
-                let val = (self.0 >> 12usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Idle clock timeout detection"]
-            pub fn set_tidle(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
-            }
-            #[doc = "Clock timeout enable"]
-            pub const fn timouten(&self) -> bool {
-                let val = (self.0 >> 15usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Clock timeout enable"]
-            pub fn set_timouten(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
-            }
-            #[doc = "Bus timeout B"]
-            pub const fn timeoutb(&self) -> u16 {
-                let val = (self.0 >> 16usize) & 0x0fff;
-                val as u16
-            }
-            #[doc = "Bus timeout B"]
-            pub fn set_timeoutb(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize);
-            }
-            #[doc = "Extended clock timeout enable"]
-            pub const fn texten(&self) -> bool {
-                let val = (self.0 >> 31usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Extended clock timeout enable"]
-            pub fn set_texten(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
-            }
-        }
-        impl Default for Timeoutr {
-            fn default() -> Timeoutr {
-                Timeoutr(0)
-            }
-        }
-        #[doc = "Control register 2"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr2(pub u32);
-        impl Cr2 {
-            #[doc = "Slave address bit (master mode)"]
-            pub const fn sadd(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x03ff;
-                val as u16
-            }
-            #[doc = "Slave address bit (master mode)"]
-            pub fn set_sadd(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x03ff << 0usize)) | (((val as u32) & 0x03ff) << 0usize);
-            }
-            #[doc = "Transfer direction (master mode)"]
-            pub const fn rd_wrn(&self) -> super::vals::RdWrn {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::RdWrn(val as u8)
-            }
-            #[doc = "Transfer direction (master mode)"]
-            pub fn set_rd_wrn(&mut self, val: super::vals::RdWrn) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "10-bit addressing mode (master mode)"]
-            pub const fn add10(&self) -> super::vals::Add {
+            #[doc = "Window watchdog clock enable bit"]
+            pub const fn wwdgen(&self) -> super::vals::Lptimen {
                 let val = (self.0 >> 11usize) & 0x01;
-                super::vals::Add(val as u8)
+                super::vals::Lptimen(val as u8)
             }
-            #[doc = "10-bit addressing mode (master mode)"]
-            pub fn set_add10(&mut self, val: super::vals::Add) {
+            #[doc = "Window watchdog clock enable bit"]
+            pub fn set_wwdgen(&mut self, val: super::vals::Lptimen) {
                 self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
             }
-            #[doc = "10-bit address header only read direction (master receiver mode)"]
-            pub const fn head10r(&self) -> super::vals::Headr {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Headr(val as u8)
-            }
-            #[doc = "10-bit address header only read direction (master receiver mode)"]
-            pub fn set_head10r(&mut self, val: super::vals::Headr) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "Start generation"]
-            pub const fn start(&self) -> super::vals::Start {
-                let val = (self.0 >> 13usize) & 0x01;
-                super::vals::Start(val as u8)
-            }
-            #[doc = "Start generation"]
-            pub fn set_start(&mut self, val: super::vals::Start) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize);
-            }
-            #[doc = "Stop generation (master mode)"]
-            pub const fn stop(&self) -> super::vals::Stop {
+            #[doc = "SPI2 clock enable bit"]
+            pub const fn spi2en(&self) -> super::vals::Lptimen {
                 let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Stop(val as u8)
+                super::vals::Lptimen(val as u8)
             }
-            #[doc = "Stop generation (master mode)"]
-            pub fn set_stop(&mut self, val: super::vals::Stop) {
+            #[doc = "SPI2 clock enable bit"]
+            pub fn set_spi2en(&mut self, val: super::vals::Lptimen) {
                 self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
             }
-            #[doc = "NACK generation (slave mode)"]
-            pub const fn nack(&self) -> super::vals::Nack {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Nack(val as u8)
+            #[doc = "UART2 clock enable bit"]
+            pub const fn usart2en(&self) -> super::vals::Lptimen {
+                let val = (self.0 >> 17usize) & 0x01;
+                super::vals::Lptimen(val as u8)
             }
-            #[doc = "NACK generation (slave mode)"]
-            pub fn set_nack(&mut self, val: super::vals::Nack) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            #[doc = "UART2 clock enable bit"]
+            pub fn set_usart2en(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
             }
-            #[doc = "Number of bytes"]
-            pub const fn nbytes(&self) -> u8 {
+            #[doc = "LPUART1 clock enable bit"]
+            pub const fn lpuart1en(&self) -> super::vals::Lptimen {
+                let val = (self.0 >> 18usize) & 0x01;
+                super::vals::Lptimen(val as u8)
+            }
+            #[doc = "LPUART1 clock enable bit"]
+            pub fn set_lpuart1en(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
+            }
+            #[doc = "USART4 clock enable bit"]
+            pub const fn usart4en(&self) -> super::vals::Lptimen {
+                let val = (self.0 >> 19usize) & 0x01;
+                super::vals::Lptimen(val as u8)
+            }
+            #[doc = "USART4 clock enable bit"]
+            pub fn set_usart4en(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
+            }
+            #[doc = "USART5 clock enable bit"]
+            pub const fn usart5en(&self) -> super::vals::Lptimen {
+                let val = (self.0 >> 20usize) & 0x01;
+                super::vals::Lptimen(val as u8)
+            }
+            #[doc = "USART5 clock enable bit"]
+            pub fn set_usart5en(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize);
+            }
+            #[doc = "I2C1 clock enable bit"]
+            pub const fn i2c1en(&self) -> super::vals::Lptimen {
+                let val = (self.0 >> 21usize) & 0x01;
+                super::vals::Lptimen(val as u8)
+            }
+            #[doc = "I2C1 clock enable bit"]
+            pub fn set_i2c1en(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
+            }
+            #[doc = "I2C2 clock enable bit"]
+            pub const fn i2c2en(&self) -> super::vals::Lptimen {
+                let val = (self.0 >> 22usize) & 0x01;
+                super::vals::Lptimen(val as u8)
+            }
+            #[doc = "I2C2 clock enable bit"]
+            pub fn set_i2c2en(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
+            }
+            #[doc = "USB clock enable bit"]
+            pub const fn usben(&self) -> super::vals::Lptimen {
+                let val = (self.0 >> 23usize) & 0x01;
+                super::vals::Lptimen(val as u8)
+            }
+            #[doc = "USB clock enable bit"]
+            pub fn set_usben(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize);
+            }
+            #[doc = "Clock recovery system clock enable bit"]
+            pub const fn crsen(&self) -> super::vals::Lptimen {
+                let val = (self.0 >> 27usize) & 0x01;
+                super::vals::Lptimen(val as u8)
+            }
+            #[doc = "Clock recovery system clock enable bit"]
+            pub fn set_crsen(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
+            }
+            #[doc = "Power interface clock enable bit"]
+            pub const fn pwren(&self) -> super::vals::Lptimen {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::Lptimen(val as u8)
+            }
+            #[doc = "Power interface clock enable bit"]
+            pub fn set_pwren(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
+            }
+            #[doc = "DAC interface clock enable bit"]
+            pub const fn dacen(&self) -> super::vals::Lptimen {
+                let val = (self.0 >> 29usize) & 0x01;
+                super::vals::Lptimen(val as u8)
+            }
+            #[doc = "DAC interface clock enable bit"]
+            pub fn set_dacen(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
+            }
+            #[doc = "I2C3 clock enable bit"]
+            pub const fn i2c3en(&self) -> super::vals::Lptimen {
+                let val = (self.0 >> 30usize) & 0x01;
+                super::vals::Lptimen(val as u8)
+            }
+            #[doc = "I2C3 clock enable bit"]
+            pub fn set_i2c3en(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize);
+            }
+            #[doc = "Low power timer clock enable bit"]
+            pub const fn lptim1en(&self) -> super::vals::Lptimen {
+                let val = (self.0 >> 31usize) & 0x01;
+                super::vals::Lptimen(val as u8)
+            }
+            #[doc = "Low power timer clock enable bit"]
+            pub fn set_lptim1en(&mut self, val: super::vals::Lptimen) {
+                self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
+            }
+        }
+        impl Default for Apb1enr {
+            fn default() -> Apb1enr {
+                Apb1enr(0)
+            }
+        }
+        #[doc = "Clock interrupt flag register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cifr(pub u32);
+        impl Cifr {
+            #[doc = "LSI ready interrupt flag"]
+            pub const fn lsirdyf(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LSI ready interrupt flag"]
+            pub fn set_lsirdyf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "LSE ready interrupt flag"]
+            pub const fn lserdyf(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LSE ready interrupt flag"]
+            pub fn set_lserdyf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "HSI16 ready interrupt flag"]
+            pub const fn hsi16rdyf(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "HSI16 ready interrupt flag"]
+            pub fn set_hsi16rdyf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "HSE ready interrupt flag"]
+            pub const fn hserdyf(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "HSE ready interrupt flag"]
+            pub fn set_hserdyf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "PLL ready interrupt flag"]
+            pub const fn pllrdyf(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "PLL ready interrupt flag"]
+            pub fn set_pllrdyf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "MSI ready interrupt flag"]
+            pub const fn msirdyf(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "MSI ready interrupt flag"]
+            pub fn set_msirdyf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "HSI48 ready interrupt flag"]
+            pub const fn hsi48rdyf(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "HSI48 ready interrupt flag"]
+            pub fn set_hsi48rdyf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "LSE Clock Security System Interrupt flag"]
+            pub const fn csslsef(&self) -> super::vals::Csslsef {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Csslsef(val as u8)
+            }
+            #[doc = "LSE Clock Security System Interrupt flag"]
+            pub fn set_csslsef(&mut self, val: super::vals::Csslsef) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Clock Security System Interrupt flag"]
+            pub const fn csshsef(&self) -> super::vals::Csshsef {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::Csshsef(val as u8)
+            }
+            #[doc = "Clock Security System Interrupt flag"]
+            pub fn set_csshsef(&mut self, val: super::vals::Csshsef) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+        }
+        impl Default for Cifr {
+            fn default() -> Cifr {
+                Cifr(0)
+            }
+        }
+        #[doc = "Internal clock sources calibration register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Icscr(pub u32);
+        impl Icscr {
+            #[doc = "nternal high speed clock calibration"]
+            pub const fn hsi16cal(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0xff;
+                val as u8
+            }
+            #[doc = "nternal high speed clock calibration"]
+            pub fn set_hsi16cal(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
+            }
+            #[doc = "High speed internal clock trimming"]
+            pub const fn hsi16trim(&self) -> u8 {
+                let val = (self.0 >> 8usize) & 0x1f;
+                val as u8
+            }
+            #[doc = "High speed internal clock trimming"]
+            pub fn set_hsi16trim(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x1f << 8usize)) | (((val as u32) & 0x1f) << 8usize);
+            }
+            #[doc = "MSI clock ranges"]
+            pub const fn msirange(&self) -> super::vals::Msirange {
+                let val = (self.0 >> 13usize) & 0x07;
+                super::vals::Msirange(val as u8)
+            }
+            #[doc = "MSI clock ranges"]
+            pub fn set_msirange(&mut self, val: super::vals::Msirange) {
+                self.0 = (self.0 & !(0x07 << 13usize)) | (((val.0 as u32) & 0x07) << 13usize);
+            }
+            #[doc = "MSI clock calibration"]
+            pub const fn msical(&self) -> u8 {
                 let val = (self.0 >> 16usize) & 0xff;
                 val as u8
             }
-            #[doc = "Number of bytes"]
-            pub fn set_nbytes(&mut self, val: u8) {
+            #[doc = "MSI clock calibration"]
+            pub fn set_msical(&mut self, val: u8) {
                 self.0 = (self.0 & !(0xff << 16usize)) | (((val as u32) & 0xff) << 16usize);
             }
-            #[doc = "NBYTES reload mode"]
-            pub const fn reload(&self) -> super::vals::Reload {
-                let val = (self.0 >> 24usize) & 0x01;
-                super::vals::Reload(val as u8)
-            }
-            #[doc = "NBYTES reload mode"]
-            pub fn set_reload(&mut self, val: super::vals::Reload) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
-            }
-            #[doc = "Automatic end mode (master mode)"]
-            pub const fn autoend(&self) -> super::vals::Autoend {
-                let val = (self.0 >> 25usize) & 0x01;
-                super::vals::Autoend(val as u8)
-            }
-            #[doc = "Automatic end mode (master mode)"]
-            pub fn set_autoend(&mut self, val: super::vals::Autoend) {
-                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
-            }
-            #[doc = "Packet error checking byte"]
-            pub const fn pecbyte(&self) -> super::vals::Pecbyte {
-                let val = (self.0 >> 26usize) & 0x01;
-                super::vals::Pecbyte(val as u8)
-            }
-            #[doc = "Packet error checking byte"]
-            pub fn set_pecbyte(&mut self, val: super::vals::Pecbyte) {
-                self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize);
-            }
-        }
-        impl Default for Cr2 {
-            fn default() -> Cr2 {
-                Cr2(0)
-            }
-        }
-        #[doc = "Transmit data register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Txdr(pub u32);
-        impl Txdr {
-            #[doc = "8-bit transmit data"]
-            pub const fn txdata(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0xff;
+            #[doc = "MSI clock trimming"]
+            pub const fn msitrim(&self) -> u8 {
+                let val = (self.0 >> 24usize) & 0xff;
                 val as u8
             }
-            #[doc = "8-bit transmit data"]
-            pub fn set_txdata(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
+            #[doc = "MSI clock trimming"]
+            pub fn set_msitrim(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 24usize)) | (((val as u32) & 0xff) << 24usize);
             }
         }
-        impl Default for Txdr {
-            fn default() -> Txdr {
-                Txdr(0)
+        impl Default for Icscr {
+            fn default() -> Icscr {
+                Icscr(0)
             }
         }
-        #[doc = "Interrupt and Status register"]
+        #[doc = "APB2 peripheral clock enable register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Isr(pub u32);
-        impl Isr {
-            #[doc = "Transmit data register empty (transmitters)"]
-            pub const fn txe(&self) -> bool {
+        pub struct Apb2enr(pub u32);
+        impl Apb2enr {
+            #[doc = "System configuration controller clock enable bit"]
+            pub const fn syscfgen(&self) -> super::vals::Dbgen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Dbgen(val as u8)
+            }
+            #[doc = "System configuration controller clock enable bit"]
+            pub fn set_syscfgen(&mut self, val: super::vals::Dbgen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "TIM21 timer clock enable bit"]
+            pub const fn tim21en(&self) -> super::vals::Dbgen {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Dbgen(val as u8)
+            }
+            #[doc = "TIM21 timer clock enable bit"]
+            pub fn set_tim21en(&mut self, val: super::vals::Dbgen) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "TIM22 timer clock enable bit"]
+            pub const fn tim22en(&self) -> super::vals::Dbgen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Dbgen(val as u8)
+            }
+            #[doc = "TIM22 timer clock enable bit"]
+            pub fn set_tim22en(&mut self, val: super::vals::Dbgen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "MiFaRe Firewall clock enable bit"]
+            pub const fn mifien(&self) -> super::vals::Dbgen {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Dbgen(val as u8)
+            }
+            #[doc = "MiFaRe Firewall clock enable bit"]
+            pub fn set_mifien(&mut self, val: super::vals::Dbgen) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "ADC clock enable bit"]
+            pub const fn adcen(&self) -> super::vals::Dbgen {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Dbgen(val as u8)
+            }
+            #[doc = "ADC clock enable bit"]
+            pub fn set_adcen(&mut self, val: super::vals::Dbgen) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "SPI1 clock enable bit"]
+            pub const fn spi1en(&self) -> super::vals::Dbgen {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Dbgen(val as u8)
+            }
+            #[doc = "SPI1 clock enable bit"]
+            pub fn set_spi1en(&mut self, val: super::vals::Dbgen) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "USART1 clock enable bit"]
+            pub const fn usart1en(&self) -> super::vals::Dbgen {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Dbgen(val as u8)
+            }
+            #[doc = "USART1 clock enable bit"]
+            pub fn set_usart1en(&mut self, val: super::vals::Dbgen) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "DBG clock enable bit"]
+            pub const fn dbgen(&self) -> super::vals::Dbgen {
+                let val = (self.0 >> 22usize) & 0x01;
+                super::vals::Dbgen(val as u8)
+            }
+            #[doc = "DBG clock enable bit"]
+            pub fn set_dbgen(&mut self, val: super::vals::Dbgen) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
+            }
+        }
+        impl Default for Apb2enr {
+            fn default() -> Apb2enr {
+                Apb2enr(0)
+            }
+        }
+        #[doc = "APB2 peripheral reset register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Apb2rstr(pub u32);
+        impl Apb2rstr {
+            #[doc = "System configuration controller reset"]
+            pub const fn syscfgrst(&self) -> bool {
                 let val = (self.0 >> 0usize) & 0x01;
                 val != 0
             }
-            #[doc = "Transmit data register empty (transmitters)"]
-            pub fn set_txe(&mut self, val: bool) {
+            #[doc = "System configuration controller reset"]
+            pub fn set_syscfgrst(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
             }
-            #[doc = "Transmit interrupt status (transmitters)"]
-            pub const fn txis(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transmit interrupt status (transmitters)"]
-            pub fn set_txis(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Receive data register not empty (receivers)"]
-            pub const fn rxne(&self) -> bool {
+            #[doc = "TIM21 timer reset"]
+            pub const fn tim21rst(&self) -> bool {
                 let val = (self.0 >> 2usize) & 0x01;
                 val != 0
             }
-            #[doc = "Receive data register not empty (receivers)"]
-            pub fn set_rxne(&mut self, val: bool) {
+            #[doc = "TIM21 timer reset"]
+            pub fn set_tim21rst(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
             }
-            #[doc = "Address matched (slave mode)"]
-            pub const fn addr(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Address matched (slave mode)"]
-            pub fn set_addr(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Not acknowledge received flag"]
-            pub const fn nackf(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Not acknowledge received flag"]
-            pub fn set_nackf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Stop detection flag"]
-            pub const fn stopf(&self) -> bool {
+            #[doc = "TIM22 timer reset"]
+            pub const fn tim22rst(&self) -> bool {
                 let val = (self.0 >> 5usize) & 0x01;
                 val != 0
             }
-            #[doc = "Stop detection flag"]
-            pub fn set_stopf(&mut self, val: bool) {
+            #[doc = "TIM22 timer reset"]
+            pub fn set_tim22rst(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
             }
-            #[doc = "Transfer Complete (master mode)"]
-            pub const fn tc(&self) -> bool {
+            #[doc = "ADC interface reset"]
+            pub const fn adcrst(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "ADC interface reset"]
+            pub fn set_adcrst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "SPI 1 reset"]
+            pub const fn spi1rst(&self) -> bool {
+                let val = (self.0 >> 12usize) & 0x01;
+                val != 0
+            }
+            #[doc = "SPI 1 reset"]
+            pub fn set_spi1rst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
+            }
+            #[doc = "USART1 reset"]
+            pub const fn usart1rst(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "USART1 reset"]
+            pub fn set_usart1rst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+            #[doc = "DBG reset"]
+            pub const fn dbgrst(&self) -> bool {
+                let val = (self.0 >> 22usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DBG reset"]
+            pub fn set_dbgrst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
+            }
+        }
+        impl Default for Apb2rstr {
+            fn default() -> Apb2rstr {
+                Apb2rstr(0)
+            }
+        }
+        #[doc = "Clock configuration register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cfgr(pub u32);
+        impl Cfgr {
+            #[doc = "System clock switch"]
+            pub const fn sw(&self) -> super::vals::Sw {
+                let val = (self.0 >> 0usize) & 0x03;
+                super::vals::Sw(val as u8)
+            }
+            #[doc = "System clock switch"]
+            pub fn set_sw(&mut self, val: super::vals::Sw) {
+                self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize);
+            }
+            #[doc = "System clock switch status"]
+            pub const fn sws(&self) -> super::vals::Sws {
+                let val = (self.0 >> 2usize) & 0x03;
+                super::vals::Sws(val as u8)
+            }
+            #[doc = "System clock switch status"]
+            pub fn set_sws(&mut self, val: super::vals::Sws) {
+                self.0 = (self.0 & !(0x03 << 2usize)) | (((val.0 as u32) & 0x03) << 2usize);
+            }
+            #[doc = "AHB prescaler"]
+            pub const fn hpre(&self) -> super::vals::Hpre {
+                let val = (self.0 >> 4usize) & 0x0f;
+                super::vals::Hpre(val as u8)
+            }
+            #[doc = "AHB prescaler"]
+            pub fn set_hpre(&mut self, val: super::vals::Hpre) {
+                self.0 = (self.0 & !(0x0f << 4usize)) | (((val.0 as u32) & 0x0f) << 4usize);
+            }
+            #[doc = "APB low-speed prescaler (APB1)"]
+            pub fn ppre(&self, n: usize) -> super::vals::Ppre {
+                assert!(n < 2usize);
+                let offs = 8usize + n * 3usize;
+                let val = (self.0 >> offs) & 0x07;
+                super::vals::Ppre(val as u8)
+            }
+            #[doc = "APB low-speed prescaler (APB1)"]
+            pub fn set_ppre(&mut self, n: usize, val: super::vals::Ppre) {
+                assert!(n < 2usize);
+                let offs = 8usize + n * 3usize;
+                self.0 = (self.0 & !(0x07 << offs)) | (((val.0 as u32) & 0x07) << offs);
+            }
+            #[doc = "Wake-up from stop clock selection"]
+            pub const fn stopwuck(&self) -> super::vals::Stopwuck {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Stopwuck(val as u8)
+            }
+            #[doc = "Wake-up from stop clock selection"]
+            pub fn set_stopwuck(&mut self, val: super::vals::Stopwuck) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "PLL entry clock source"]
+            pub const fn pllsrc(&self) -> super::vals::Pllsrc {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Pllsrc(val as u8)
+            }
+            #[doc = "PLL entry clock source"]
+            pub fn set_pllsrc(&mut self, val: super::vals::Pllsrc) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "PLL multiplication factor"]
+            pub const fn pllmul(&self) -> super::vals::Pllmul {
+                let val = (self.0 >> 18usize) & 0x0f;
+                super::vals::Pllmul(val as u8)
+            }
+            #[doc = "PLL multiplication factor"]
+            pub fn set_pllmul(&mut self, val: super::vals::Pllmul) {
+                self.0 = (self.0 & !(0x0f << 18usize)) | (((val.0 as u32) & 0x0f) << 18usize);
+            }
+            #[doc = "PLL output division"]
+            pub const fn plldiv(&self) -> super::vals::Plldiv {
+                let val = (self.0 >> 22usize) & 0x03;
+                super::vals::Plldiv(val as u8)
+            }
+            #[doc = "PLL output division"]
+            pub fn set_plldiv(&mut self, val: super::vals::Plldiv) {
+                self.0 = (self.0 & !(0x03 << 22usize)) | (((val.0 as u32) & 0x03) << 22usize);
+            }
+            #[doc = "Microcontroller clock output selection"]
+            pub const fn mcosel(&self) -> super::vals::Mcosel {
+                let val = (self.0 >> 24usize) & 0x0f;
+                super::vals::Mcosel(val as u8)
+            }
+            #[doc = "Microcontroller clock output selection"]
+            pub fn set_mcosel(&mut self, val: super::vals::Mcosel) {
+                self.0 = (self.0 & !(0x0f << 24usize)) | (((val.0 as u32) & 0x0f) << 24usize);
+            }
+            #[doc = "Microcontroller clock output prescaler"]
+            pub const fn mcopre(&self) -> super::vals::Mcopre {
+                let val = (self.0 >> 28usize) & 0x07;
+                super::vals::Mcopre(val as u8)
+            }
+            #[doc = "Microcontroller clock output prescaler"]
+            pub fn set_mcopre(&mut self, val: super::vals::Mcopre) {
+                self.0 = (self.0 & !(0x07 << 28usize)) | (((val.0 as u32) & 0x07) << 28usize);
+            }
+        }
+        impl Default for Cfgr {
+            fn default() -> Cfgr {
+                Cfgr(0)
+            }
+        }
+        #[doc = "APB1 peripheral reset register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Apb1rstr(pub u32);
+        impl Apb1rstr {
+            #[doc = "Timer2 reset"]
+            pub const fn tim2rst(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Timer2 reset"]
+            pub fn set_tim2rst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Timer3 reset"]
+            pub const fn tim3rst(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Timer3 reset"]
+            pub fn set_tim3rst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Timer 6 reset"]
+            pub const fn tim6rst(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Timer 6 reset"]
+            pub fn set_tim6rst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Timer 7 reset"]
+            pub const fn tim7rst(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Timer 7 reset"]
+            pub fn set_tim7rst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Window watchdog reset"]
+            pub const fn wwdrst(&self) -> bool {
+                let val = (self.0 >> 11usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Window watchdog reset"]
+            pub fn set_wwdrst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
+            }
+            #[doc = "SPI2 reset"]
+            pub const fn spi2rst(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "SPI2 reset"]
+            pub fn set_spi2rst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+            #[doc = "UART2 reset"]
+            pub const fn lpuart12rst(&self) -> bool {
+                let val = (self.0 >> 17usize) & 0x01;
+                val != 0
+            }
+            #[doc = "UART2 reset"]
+            pub fn set_lpuart12rst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
+            }
+            #[doc = "LPUART1 reset"]
+            pub const fn lpuart1rst(&self) -> bool {
+                let val = (self.0 >> 18usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LPUART1 reset"]
+            pub fn set_lpuart1rst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize);
+            }
+            #[doc = "USART4 reset"]
+            pub const fn usart4rst(&self) -> bool {
+                let val = (self.0 >> 19usize) & 0x01;
+                val != 0
+            }
+            #[doc = "USART4 reset"]
+            pub fn set_usart4rst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize);
+            }
+            #[doc = "USART5 reset"]
+            pub const fn usart5rst(&self) -> bool {
+                let val = (self.0 >> 20usize) & 0x01;
+                val != 0
+            }
+            #[doc = "USART5 reset"]
+            pub fn set_usart5rst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
+            }
+            #[doc = "I2C1 reset"]
+            pub const fn i2c1rst(&self) -> bool {
+                let val = (self.0 >> 21usize) & 0x01;
+                val != 0
+            }
+            #[doc = "I2C1 reset"]
+            pub fn set_i2c1rst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
+            }
+            #[doc = "I2C2 reset"]
+            pub const fn i2c2rst(&self) -> bool {
+                let val = (self.0 >> 22usize) & 0x01;
+                val != 0
+            }
+            #[doc = "I2C2 reset"]
+            pub fn set_i2c2rst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
+            }
+            #[doc = "USB reset"]
+            pub const fn usbrst(&self) -> bool {
+                let val = (self.0 >> 23usize) & 0x01;
+                val != 0
+            }
+            #[doc = "USB reset"]
+            pub fn set_usbrst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
+            }
+            #[doc = "Clock recovery system reset"]
+            pub const fn crsrst(&self) -> bool {
+                let val = (self.0 >> 27usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Clock recovery system reset"]
+            pub fn set_crsrst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize);
+            }
+            #[doc = "Power interface reset"]
+            pub const fn pwrrst(&self) -> bool {
+                let val = (self.0 >> 28usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Power interface reset"]
+            pub fn set_pwrrst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize);
+            }
+            #[doc = "DAC interface reset"]
+            pub const fn dacrst(&self) -> bool {
+                let val = (self.0 >> 29usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DAC interface reset"]
+            pub fn set_dacrst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize);
+            }
+            #[doc = "I2C3 reset"]
+            pub const fn i2c3rst(&self) -> bool {
+                let val = (self.0 >> 30usize) & 0x01;
+                val != 0
+            }
+            #[doc = "I2C3 reset"]
+            pub fn set_i2c3rst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize);
+            }
+            #[doc = "Low power timer reset"]
+            pub const fn lptim1rst(&self) -> bool {
+                let val = (self.0 >> 31usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Low power timer reset"]
+            pub fn set_lptim1rst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
+            }
+        }
+        impl Default for Apb1rstr {
+            fn default() -> Apb1rstr {
+                Apb1rstr(0)
+            }
+        }
+        #[doc = "GPIO clock enable register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Iopenr(pub u32);
+        impl Iopenr {
+            #[doc = "IO port A clock enable bit"]
+            pub const fn iopaen(&self) -> super::vals::Iophen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Iophen(val as u8)
+            }
+            #[doc = "IO port A clock enable bit"]
+            pub fn set_iopaen(&mut self, val: super::vals::Iophen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "IO port B clock enable bit"]
+            pub const fn iopben(&self) -> super::vals::Iophen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Iophen(val as u8)
+            }
+            #[doc = "IO port B clock enable bit"]
+            pub fn set_iopben(&mut self, val: super::vals::Iophen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "IO port A clock enable bit"]
+            pub const fn iopcen(&self) -> super::vals::Iophen {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Iophen(val as u8)
+            }
+            #[doc = "IO port A clock enable bit"]
+            pub fn set_iopcen(&mut self, val: super::vals::Iophen) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "I/O port D clock enable bit"]
+            pub const fn iopden(&self) -> super::vals::Iophen {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Iophen(val as u8)
+            }
+            #[doc = "I/O port D clock enable bit"]
+            pub fn set_iopden(&mut self, val: super::vals::Iophen) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "I/O port E clock enable bit"]
+            pub const fn iopeen(&self) -> super::vals::Iophen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Iophen(val as u8)
+            }
+            #[doc = "I/O port E clock enable bit"]
+            pub fn set_iopeen(&mut self, val: super::vals::Iophen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "I/O port H clock enable bit"]
+            pub const fn iophen(&self) -> super::vals::Iophen {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Iophen(val as u8)
+            }
+            #[doc = "I/O port H clock enable bit"]
+            pub fn set_iophen(&mut self, val: super::vals::Iophen) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+        }
+        impl Default for Iopenr {
+            fn default() -> Iopenr {
+                Iopenr(0)
+            }
+        }
+        #[doc = "Clock configuration register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ccipr(pub u32);
+        impl Ccipr {
+            #[doc = "USART1 clock source selection bits"]
+            pub const fn usart1sel(&self) -> super::vals::Lpuartsel {
+                let val = (self.0 >> 0usize) & 0x03;
+                super::vals::Lpuartsel(val as u8)
+            }
+            #[doc = "USART1 clock source selection bits"]
+            pub fn set_usart1sel(&mut self, val: super::vals::Lpuartsel) {
+                self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize);
+            }
+            #[doc = "USART2 clock source selection bits"]
+            pub const fn usart2sel(&self) -> super::vals::Lpuartsel {
+                let val = (self.0 >> 2usize) & 0x03;
+                super::vals::Lpuartsel(val as u8)
+            }
+            #[doc = "USART2 clock source selection bits"]
+            pub fn set_usart2sel(&mut self, val: super::vals::Lpuartsel) {
+                self.0 = (self.0 & !(0x03 << 2usize)) | (((val.0 as u32) & 0x03) << 2usize);
+            }
+            #[doc = "LPUART1 clock source selection bits"]
+            pub const fn lpuart1sel(&self) -> super::vals::Lpuartsel {
+                let val = (self.0 >> 10usize) & 0x03;
+                super::vals::Lpuartsel(val as u8)
+            }
+            #[doc = "LPUART1 clock source selection bits"]
+            pub fn set_lpuart1sel(&mut self, val: super::vals::Lpuartsel) {
+                self.0 = (self.0 & !(0x03 << 10usize)) | (((val.0 as u32) & 0x03) << 10usize);
+            }
+            #[doc = "I2C1 clock source selection bits"]
+            pub const fn i2c1sel(&self) -> super::vals::Icsel {
+                let val = (self.0 >> 12usize) & 0x03;
+                super::vals::Icsel(val as u8)
+            }
+            #[doc = "I2C1 clock source selection bits"]
+            pub fn set_i2c1sel(&mut self, val: super::vals::Icsel) {
+                self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize);
+            }
+            #[doc = "I2C3 clock source selection bits"]
+            pub const fn i2c3sel(&self) -> super::vals::Icsel {
+                let val = (self.0 >> 16usize) & 0x03;
+                super::vals::Icsel(val as u8)
+            }
+            #[doc = "I2C3 clock source selection bits"]
+            pub fn set_i2c3sel(&mut self, val: super::vals::Icsel) {
+                self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize);
+            }
+            #[doc = "Low Power Timer clock source selection bits"]
+            pub const fn lptim1sel(&self) -> super::vals::Lptimsel {
+                let val = (self.0 >> 18usize) & 0x03;
+                super::vals::Lptimsel(val as u8)
+            }
+            #[doc = "Low Power Timer clock source selection bits"]
+            pub fn set_lptim1sel(&mut self, val: super::vals::Lptimsel) {
+                self.0 = (self.0 & !(0x03 << 18usize)) | (((val.0 as u32) & 0x03) << 18usize);
+            }
+            #[doc = "48 MHz HSI48 clock source selection bit"]
+            pub const fn hsi48msel(&self) -> bool {
+                let val = (self.0 >> 26usize) & 0x01;
+                val != 0
+            }
+            #[doc = "48 MHz HSI48 clock source selection bit"]
+            pub fn set_hsi48msel(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
+            }
+        }
+        impl Default for Ccipr {
+            fn default() -> Ccipr {
+                Ccipr(0)
+            }
+        }
+        #[doc = "AHB peripheral clock enable register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ahbenr(pub u32);
+        impl Ahbenr {
+            #[doc = "DMA clock enable bit"]
+            pub const fn dmaen(&self) -> super::vals::Crypen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Crypen(val as u8)
+            }
+            #[doc = "DMA clock enable bit"]
+            pub fn set_dmaen(&mut self, val: super::vals::Crypen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "NVM interface clock enable bit"]
+            pub const fn mifen(&self) -> super::vals::Crypen {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::Crypen(val as u8)
+            }
+            #[doc = "NVM interface clock enable bit"]
+            pub fn set_mifen(&mut self, val: super::vals::Crypen) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+            #[doc = "CRC clock enable bit"]
+            pub const fn crcen(&self) -> super::vals::Crypen {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Crypen(val as u8)
+            }
+            #[doc = "CRC clock enable bit"]
+            pub fn set_crcen(&mut self, val: super::vals::Crypen) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "Touch Sensing clock enable bit"]
+            pub const fn touchen(&self) -> super::vals::Crypen {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Crypen(val as u8)
+            }
+            #[doc = "Touch Sensing clock enable bit"]
+            pub fn set_touchen(&mut self, val: super::vals::Crypen) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "Random Number Generator clock enable bit"]
+            pub const fn rngen(&self) -> super::vals::Crypen {
+                let val = (self.0 >> 20usize) & 0x01;
+                super::vals::Crypen(val as u8)
+            }
+            #[doc = "Random Number Generator clock enable bit"]
+            pub fn set_rngen(&mut self, val: super::vals::Crypen) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize);
+            }
+            #[doc = "Crypto clock enable bit"]
+            pub const fn crypen(&self) -> super::vals::Crypen {
+                let val = (self.0 >> 24usize) & 0x01;
+                super::vals::Crypen(val as u8)
+            }
+            #[doc = "Crypto clock enable bit"]
+            pub fn set_crypen(&mut self, val: super::vals::Crypen) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
+            }
+        }
+        impl Default for Ahbenr {
+            fn default() -> Ahbenr {
+                Ahbenr(0)
+            }
+        }
+        #[doc = "Control and status register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Csr(pub u32);
+        impl Csr {
+            #[doc = "Internal low-speed oscillator enable"]
+            pub const fn lsion(&self) -> super::vals::Csslseon {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Csslseon(val as u8)
+            }
+            #[doc = "Internal low-speed oscillator enable"]
+            pub fn set_lsion(&mut self, val: super::vals::Csslseon) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Internal low-speed oscillator ready bit"]
+            pub const fn lsirdy(&self) -> super::vals::Lserdy {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Lserdy(val as u8)
+            }
+            #[doc = "Internal low-speed oscillator ready bit"]
+            pub fn set_lsirdy(&mut self, val: super::vals::Lserdy) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "External low-speed oscillator enable bit"]
+            pub const fn lseon(&self) -> super::vals::Csslseon {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::Csslseon(val as u8)
+            }
+            #[doc = "External low-speed oscillator enable bit"]
+            pub fn set_lseon(&mut self, val: super::vals::Csslseon) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+            #[doc = "External low-speed oscillator ready bit"]
+            pub const fn lserdy(&self) -> super::vals::Lserdy {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Lserdy(val as u8)
+            }
+            #[doc = "External low-speed oscillator ready bit"]
+            pub fn set_lserdy(&mut self, val: super::vals::Lserdy) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "External low-speed oscillator bypass bit"]
+            pub const fn lsebyp(&self) -> super::vals::Lsebyp {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::Lsebyp(val as u8)
+            }
+            #[doc = "External low-speed oscillator bypass bit"]
+            pub fn set_lsebyp(&mut self, val: super::vals::Lsebyp) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "LSEDRV"]
+            pub const fn lsedrv(&self) -> super::vals::Lsedrv {
+                let val = (self.0 >> 11usize) & 0x03;
+                super::vals::Lsedrv(val as u8)
+            }
+            #[doc = "LSEDRV"]
+            pub fn set_lsedrv(&mut self, val: super::vals::Lsedrv) {
+                self.0 = (self.0 & !(0x03 << 11usize)) | (((val.0 as u32) & 0x03) << 11usize);
+            }
+            #[doc = "CSSLSEON"]
+            pub const fn csslseon(&self) -> super::vals::Csslseon {
+                let val = (self.0 >> 13usize) & 0x01;
+                super::vals::Csslseon(val as u8)
+            }
+            #[doc = "CSSLSEON"]
+            pub fn set_csslseon(&mut self, val: super::vals::Csslseon) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize);
+            }
+            #[doc = "CSS on LSE failure detection flag"]
+            pub const fn csslsed(&self) -> super::vals::Csslsed {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Csslsed(val as u8)
+            }
+            #[doc = "CSS on LSE failure detection flag"]
+            pub fn set_csslsed(&mut self, val: super::vals::Csslsed) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "RTC and LCD clock source selection bits"]
+            pub const fn rtcsel(&self) -> super::vals::Rtcsel {
+                let val = (self.0 >> 16usize) & 0x03;
+                super::vals::Rtcsel(val as u8)
+            }
+            #[doc = "RTC and LCD clock source selection bits"]
+            pub fn set_rtcsel(&mut self, val: super::vals::Rtcsel) {
+                self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize);
+            }
+            #[doc = "RTC clock enable bit"]
+            pub const fn rtcen(&self) -> super::vals::Rtcen {
+                let val = (self.0 >> 18usize) & 0x01;
+                super::vals::Rtcen(val as u8)
+            }
+            #[doc = "RTC clock enable bit"]
+            pub fn set_rtcen(&mut self, val: super::vals::Rtcen) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
+            }
+            #[doc = "RTC software reset bit"]
+            pub const fn rtcrst(&self) -> bool {
+                let val = (self.0 >> 19usize) & 0x01;
+                val != 0
+            }
+            #[doc = "RTC software reset bit"]
+            pub fn set_rtcrst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize);
+            }
+            #[doc = "Remove reset flag"]
+            pub const fn rmvf(&self) -> bool {
+                let val = (self.0 >> 24usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Remove reset flag"]
+            pub fn set_rmvf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize);
+            }
+            #[doc = "OBLRSTF"]
+            pub const fn oblrstf(&self) -> bool {
+                let val = (self.0 >> 25usize) & 0x01;
+                val != 0
+            }
+            #[doc = "OBLRSTF"]
+            pub fn set_oblrstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize);
+            }
+            #[doc = "PIN reset flag"]
+            pub const fn pinrstf(&self) -> bool {
+                let val = (self.0 >> 26usize) & 0x01;
+                val != 0
+            }
+            #[doc = "PIN reset flag"]
+            pub fn set_pinrstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
+            }
+            #[doc = "POR/PDR reset flag"]
+            pub const fn porrstf(&self) -> bool {
+                let val = (self.0 >> 27usize) & 0x01;
+                val != 0
+            }
+            #[doc = "POR/PDR reset flag"]
+            pub fn set_porrstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize);
+            }
+            #[doc = "Software reset flag"]
+            pub const fn sftrstf(&self) -> bool {
+                let val = (self.0 >> 28usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Software reset flag"]
+            pub fn set_sftrstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize);
+            }
+            #[doc = "Independent watchdog reset flag"]
+            pub const fn iwdgrstf(&self) -> bool {
+                let val = (self.0 >> 29usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Independent watchdog reset flag"]
+            pub fn set_iwdgrstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize);
+            }
+            #[doc = "Window watchdog reset flag"]
+            pub const fn wwdgrstf(&self) -> bool {
+                let val = (self.0 >> 30usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Window watchdog reset flag"]
+            pub fn set_wwdgrstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize);
+            }
+            #[doc = "Low-power reset flag"]
+            pub const fn lpwrrstf(&self) -> bool {
+                let val = (self.0 >> 31usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Low-power reset flag"]
+            pub fn set_lpwrrstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
+            }
+        }
+        impl Default for Csr {
+            fn default() -> Csr {
+                Csr(0)
+            }
+        }
+        #[doc = "Clock control register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr(pub u32);
+        impl Cr {
+            #[doc = "16 MHz high-speed internal clock enable"]
+            pub const fn hsi16on(&self) -> super::vals::Pllon {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Pllon(val as u8)
+            }
+            #[doc = "16 MHz high-speed internal clock enable"]
+            pub fn set_hsi16on(&mut self, val: super::vals::Pllon) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "High-speed internal clock enable bit for some IP kernels"]
+            pub const fn hsi16keron(&self) -> super::vals::Pllon {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Pllon(val as u8)
+            }
+            #[doc = "High-speed internal clock enable bit for some IP kernels"]
+            pub fn set_hsi16keron(&mut self, val: super::vals::Pllon) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Internal high-speed clock ready flag"]
+            pub const fn hsi16rdyf(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Internal high-speed clock ready flag"]
+            pub fn set_hsi16rdyf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "HSI16DIVEN"]
+            pub const fn hsi16diven(&self) -> super::vals::Hsidiven {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Hsidiven(val as u8)
+            }
+            #[doc = "HSI16DIVEN"]
+            pub fn set_hsi16diven(&mut self, val: super::vals::Hsidiven) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "HSI16DIVF"]
+            pub const fn hsi16divf(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "HSI16DIVF"]
+            pub fn set_hsi16divf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "16 MHz high-speed internal clock output enable"]
+            pub const fn hsi16outen(&self) -> super::vals::Hsiouten {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Hsiouten(val as u8)
+            }
+            #[doc = "16 MHz high-speed internal clock output enable"]
+            pub fn set_hsi16outen(&mut self, val: super::vals::Hsiouten) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "MSI clock enable bit"]
+            pub const fn msion(&self) -> super::vals::Pllon {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::Pllon(val as u8)
+            }
+            #[doc = "MSI clock enable bit"]
+            pub fn set_msion(&mut self, val: super::vals::Pllon) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+            #[doc = "MSI clock ready flag"]
+            pub const fn msirdy(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "MSI clock ready flag"]
+            pub fn set_msirdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "HSE clock enable bit"]
+            pub const fn hseon(&self) -> super::vals::Pllon {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Pllon(val as u8)
+            }
+            #[doc = "HSE clock enable bit"]
+            pub fn set_hseon(&mut self, val: super::vals::Pllon) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "HSE clock ready flag"]
+            pub const fn hserdy(&self) -> bool {
+                let val = (self.0 >> 17usize) & 0x01;
+                val != 0
+            }
+            #[doc = "HSE clock ready flag"]
+            pub fn set_hserdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
+            }
+            #[doc = "HSE clock bypass bit"]
+            pub const fn hsebyp(&self) -> super::vals::Hsebyp {
+                let val = (self.0 >> 18usize) & 0x01;
+                super::vals::Hsebyp(val as u8)
+            }
+            #[doc = "HSE clock bypass bit"]
+            pub fn set_hsebyp(&mut self, val: super::vals::Hsebyp) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
+            }
+            #[doc = "Clock security system on HSE enable bit"]
+            pub const fn csshseon(&self) -> super::vals::Pllon {
+                let val = (self.0 >> 19usize) & 0x01;
+                super::vals::Pllon(val as u8)
+            }
+            #[doc = "Clock security system on HSE enable bit"]
+            pub fn set_csshseon(&mut self, val: super::vals::Pllon) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
+            }
+            #[doc = "TC/LCD prescaler"]
+            pub const fn rtcpre(&self) -> super::vals::Rtcpre {
+                let val = (self.0 >> 20usize) & 0x03;
+                super::vals::Rtcpre(val as u8)
+            }
+            #[doc = "TC/LCD prescaler"]
+            pub fn set_rtcpre(&mut self, val: super::vals::Rtcpre) {
+                self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize);
+            }
+            #[doc = "PLL enable bit"]
+            pub const fn pllon(&self) -> super::vals::Pllon {
+                let val = (self.0 >> 24usize) & 0x01;
+                super::vals::Pllon(val as u8)
+            }
+            #[doc = "PLL enable bit"]
+            pub fn set_pllon(&mut self, val: super::vals::Pllon) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
+            }
+            #[doc = "PLL clock ready flag"]
+            pub const fn pllrdy(&self) -> bool {
+                let val = (self.0 >> 25usize) & 0x01;
+                val != 0
+            }
+            #[doc = "PLL clock ready flag"]
+            pub fn set_pllrdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize);
+            }
+        }
+        impl Default for Cr {
+            fn default() -> Cr {
+                Cr(0)
+            }
+        }
+        #[doc = "GPIO reset register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ioprstr(pub u32);
+        impl Ioprstr {
+            #[doc = "I/O port A reset"]
+            pub const fn ioparst(&self) -> super::vals::Iophrst {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Iophrst(val as u8)
+            }
+            #[doc = "I/O port A reset"]
+            pub fn set_ioparst(&mut self, val: super::vals::Iophrst) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "I/O port B reset"]
+            pub const fn iopbrst(&self) -> super::vals::Iophrst {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Iophrst(val as u8)
+            }
+            #[doc = "I/O port B reset"]
+            pub fn set_iopbrst(&mut self, val: super::vals::Iophrst) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "I/O port A reset"]
+            pub const fn iopcrst(&self) -> super::vals::Iophrst {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Iophrst(val as u8)
+            }
+            #[doc = "I/O port A reset"]
+            pub fn set_iopcrst(&mut self, val: super::vals::Iophrst) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "I/O port D reset"]
+            pub const fn iopdrst(&self) -> super::vals::Iophrst {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Iophrst(val as u8)
+            }
+            #[doc = "I/O port D reset"]
+            pub fn set_iopdrst(&mut self, val: super::vals::Iophrst) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "I/O port E reset"]
+            pub const fn ioperst(&self) -> super::vals::Iophrst {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Iophrst(val as u8)
+            }
+            #[doc = "I/O port E reset"]
+            pub fn set_ioperst(&mut self, val: super::vals::Iophrst) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "I/O port H reset"]
+            pub const fn iophrst(&self) -> super::vals::Iophrst {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Iophrst(val as u8)
+            }
+            #[doc = "I/O port H reset"]
+            pub fn set_iophrst(&mut self, val: super::vals::Iophrst) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+        }
+        impl Default for Ioprstr {
+            fn default() -> Ioprstr {
+                Ioprstr(0)
+            }
+        }
+        #[doc = "GPIO clock enable in sleep mode register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Iopsmen(pub u32);
+        impl Iopsmen {
+            #[doc = "IOPASMEN"]
+            pub const fn iopasmen(&self) -> super::vals::Iophsmen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Iophsmen(val as u8)
+            }
+            #[doc = "IOPASMEN"]
+            pub fn set_iopasmen(&mut self, val: super::vals::Iophsmen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "IOPBSMEN"]
+            pub const fn iopbsmen(&self) -> super::vals::Iophsmen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Iophsmen(val as u8)
+            }
+            #[doc = "IOPBSMEN"]
+            pub fn set_iopbsmen(&mut self, val: super::vals::Iophsmen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "IOPCSMEN"]
+            pub const fn iopcsmen(&self) -> super::vals::Iophsmen {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Iophsmen(val as u8)
+            }
+            #[doc = "IOPCSMEN"]
+            pub fn set_iopcsmen(&mut self, val: super::vals::Iophsmen) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "IOPDSMEN"]
+            pub const fn iopdsmen(&self) -> super::vals::Iophsmen {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Iophsmen(val as u8)
+            }
+            #[doc = "IOPDSMEN"]
+            pub fn set_iopdsmen(&mut self, val: super::vals::Iophsmen) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Port E clock enable during Sleep mode bit"]
+            pub const fn iopesmen(&self) -> super::vals::Iophsmen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Iophsmen(val as u8)
+            }
+            #[doc = "Port E clock enable during Sleep mode bit"]
+            pub fn set_iopesmen(&mut self, val: super::vals::Iophsmen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "IOPHSMEN"]
+            pub const fn iophsmen(&self) -> super::vals::Iophsmen {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Iophsmen(val as u8)
+            }
+            #[doc = "IOPHSMEN"]
+            pub fn set_iophsmen(&mut self, val: super::vals::Iophsmen) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+        }
+        impl Default for Iopsmen {
+            fn default() -> Iopsmen {
+                Iopsmen(0)
+            }
+        }
+        #[doc = "APB2 peripheral clock enable in sleep mode register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Apb2smenr(pub u32);
+        impl Apb2smenr {
+            #[doc = "System configuration controller clock enable during sleep mode bit"]
+            pub const fn syscfgsmen(&self) -> super::vals::Dbgsmen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Dbgsmen(val as u8)
+            }
+            #[doc = "System configuration controller clock enable during sleep mode bit"]
+            pub fn set_syscfgsmen(&mut self, val: super::vals::Dbgsmen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "TIM21 timer clock enable during sleep mode bit"]
+            pub const fn tim21smen(&self) -> super::vals::Dbgsmen {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Dbgsmen(val as u8)
+            }
+            #[doc = "TIM21 timer clock enable during sleep mode bit"]
+            pub fn set_tim21smen(&mut self, val: super::vals::Dbgsmen) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "TIM22 timer clock enable during sleep mode bit"]
+            pub const fn tim22smen(&self) -> super::vals::Dbgsmen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Dbgsmen(val as u8)
+            }
+            #[doc = "TIM22 timer clock enable during sleep mode bit"]
+            pub fn set_tim22smen(&mut self, val: super::vals::Dbgsmen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "ADC clock enable during sleep mode bit"]
+            pub const fn adcsmen(&self) -> super::vals::Dbgsmen {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Dbgsmen(val as u8)
+            }
+            #[doc = "ADC clock enable during sleep mode bit"]
+            pub fn set_adcsmen(&mut self, val: super::vals::Dbgsmen) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "SPI1 clock enable during sleep mode bit"]
+            pub const fn spi1smen(&self) -> super::vals::Dbgsmen {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Dbgsmen(val as u8)
+            }
+            #[doc = "SPI1 clock enable during sleep mode bit"]
+            pub fn set_spi1smen(&mut self, val: super::vals::Dbgsmen) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "USART1 clock enable during sleep mode bit"]
+            pub const fn usart1smen(&self) -> super::vals::Dbgsmen {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Dbgsmen(val as u8)
+            }
+            #[doc = "USART1 clock enable during sleep mode bit"]
+            pub fn set_usart1smen(&mut self, val: super::vals::Dbgsmen) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "DBG clock enable during sleep mode bit"]
+            pub const fn dbgsmen(&self) -> super::vals::Dbgsmen {
+                let val = (self.0 >> 22usize) & 0x01;
+                super::vals::Dbgsmen(val as u8)
+            }
+            #[doc = "DBG clock enable during sleep mode bit"]
+            pub fn set_dbgsmen(&mut self, val: super::vals::Dbgsmen) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
+            }
+        }
+        impl Default for Apb2smenr {
+            fn default() -> Apb2smenr {
+                Apb2smenr(0)
+            }
+        }
+        #[doc = "AHB peripheral clock enable in sleep mode register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ahbsmenr(pub u32);
+        impl Ahbsmenr {
+            #[doc = "DMA clock enable during sleep mode bit"]
+            pub const fn dmasmen(&self) -> super::vals::Dmasmen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Dmasmen(val as u8)
+            }
+            #[doc = "DMA clock enable during sleep mode bit"]
+            pub fn set_dmasmen(&mut self, val: super::vals::Dmasmen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "NVM interface clock enable during sleep mode bit"]
+            pub const fn mifsmen(&self) -> super::vals::Mifsmen {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::Mifsmen(val as u8)
+            }
+            #[doc = "NVM interface clock enable during sleep mode bit"]
+            pub fn set_mifsmen(&mut self, val: super::vals::Mifsmen) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+            #[doc = "SRAM interface clock enable during sleep mode bit"]
+            pub const fn sramsmen(&self) -> super::vals::Sramsmen {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Sramsmen(val as u8)
+            }
+            #[doc = "SRAM interface clock enable during sleep mode bit"]
+            pub fn set_sramsmen(&mut self, val: super::vals::Sramsmen) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "CRC clock enable during sleep mode bit"]
+            pub const fn crcsmen(&self) -> super::vals::Crcsmen {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Crcsmen(val as u8)
+            }
+            #[doc = "CRC clock enable during sleep mode bit"]
+            pub fn set_crcsmen(&mut self, val: super::vals::Crcsmen) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "Touch Sensing clock enable during sleep mode bit"]
+            pub const fn touchsmen(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Touch Sensing clock enable during sleep mode bit"]
+            pub fn set_touchsmen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
+            }
+            #[doc = "Random Number Generator clock enable during sleep mode bit"]
+            pub const fn rngsmen(&self) -> bool {
+                let val = (self.0 >> 20usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Random Number Generator clock enable during sleep mode bit"]
+            pub fn set_rngsmen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
+            }
+            #[doc = "Crypto clock enable during sleep mode bit"]
+            pub const fn crypsmen(&self) -> super::vals::Crypsmen {
+                let val = (self.0 >> 24usize) & 0x01;
+                super::vals::Crypsmen(val as u8)
+            }
+            #[doc = "Crypto clock enable during sleep mode bit"]
+            pub fn set_crypsmen(&mut self, val: super::vals::Crypsmen) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
+            }
+        }
+        impl Default for Ahbsmenr {
+            fn default() -> Ahbsmenr {
+                Ahbsmenr(0)
+            }
+        }
+        #[doc = "Clock interrupt enable register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cier(pub u32);
+        impl Cier {
+            #[doc = "LSI ready interrupt flag"]
+            pub const fn lsirdyie(&self) -> super::vals::Hsirdyie {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Hsirdyie(val as u8)
+            }
+            #[doc = "LSI ready interrupt flag"]
+            pub fn set_lsirdyie(&mut self, val: super::vals::Hsirdyie) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "LSE ready interrupt flag"]
+            pub const fn lserdyie(&self) -> super::vals::Hsirdyie {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Hsirdyie(val as u8)
+            }
+            #[doc = "LSE ready interrupt flag"]
+            pub fn set_lserdyie(&mut self, val: super::vals::Hsirdyie) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "HSI16 ready interrupt flag"]
+            pub const fn hsi16rdyie(&self) -> super::vals::Hsirdyie {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Hsirdyie(val as u8)
+            }
+            #[doc = "HSI16 ready interrupt flag"]
+            pub fn set_hsi16rdyie(&mut self, val: super::vals::Hsirdyie) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "HSE ready interrupt flag"]
+            pub const fn hserdyie(&self) -> super::vals::Hsirdyie {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Hsirdyie(val as u8)
+            }
+            #[doc = "HSE ready interrupt flag"]
+            pub fn set_hserdyie(&mut self, val: super::vals::Hsirdyie) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "PLL ready interrupt flag"]
+            pub const fn pllrdyie(&self) -> super::vals::Hsirdyie {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Hsirdyie(val as u8)
+            }
+            #[doc = "PLL ready interrupt flag"]
+            pub fn set_pllrdyie(&mut self, val: super::vals::Hsirdyie) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "MSI ready interrupt flag"]
+            pub const fn msirdyie(&self) -> super::vals::Hsirdyie {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Hsirdyie(val as u8)
+            }
+            #[doc = "MSI ready interrupt flag"]
+            pub fn set_msirdyie(&mut self, val: super::vals::Hsirdyie) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "HSI48 ready interrupt flag"]
+            pub const fn hsi48rdyie(&self) -> super::vals::Hsirdyie {
+                let val = (self.0 >> 6usize) & 0x01;
+                super::vals::Hsirdyie(val as u8)
+            }
+            #[doc = "HSI48 ready interrupt flag"]
+            pub fn set_hsi48rdyie(&mut self, val: super::vals::Hsirdyie) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            }
+            #[doc = "LSE CSS interrupt flag"]
+            pub const fn csslse(&self) -> super::vals::Csslse {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Csslse(val as u8)
+            }
+            #[doc = "LSE CSS interrupt flag"]
+            pub fn set_csslse(&mut self, val: super::vals::Csslse) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+        }
+        impl Default for Cier {
+            fn default() -> Cier {
+                Cier(0)
+            }
+        }
+        #[doc = "AHB peripheral reset register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ahbrstr(pub u32);
+        impl Ahbrstr {
+            #[doc = "DMA reset"]
+            pub const fn dmarst(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DMA reset"]
+            pub fn set_dmarst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Memory interface reset"]
+            pub const fn mifrst(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Memory interface reset"]
+            pub fn set_mifrst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Test integration module reset"]
+            pub const fn crcrst(&self) -> bool {
+                let val = (self.0 >> 12usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Test integration module reset"]
+            pub fn set_crcrst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
+            }
+            #[doc = "Touch Sensing reset"]
+            pub const fn touchrst(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Touch Sensing reset"]
+            pub fn set_touchrst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
+            }
+            #[doc = "Random Number Generator module reset"]
+            pub const fn rngrst(&self) -> bool {
+                let val = (self.0 >> 20usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Random Number Generator module reset"]
+            pub fn set_rngrst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
+            }
+            #[doc = "Crypto module reset"]
+            pub const fn cryprst(&self) -> bool {
+                let val = (self.0 >> 24usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Crypto module reset"]
+            pub fn set_cryprst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize);
+            }
+        }
+        impl Default for Ahbrstr {
+            fn default() -> Ahbrstr {
+                Ahbrstr(0)
+            }
+        }
+        #[doc = "APB1 peripheral clock enable in sleep mode register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Apb1smenr(pub u32);
+        impl Apb1smenr {
+            #[doc = "Timer2 clock enable during sleep mode bit"]
+            pub const fn tim2smen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "Timer2 clock enable during sleep mode bit"]
+            pub fn set_tim2smen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Timer3 clock enable during Sleep mode bit"]
+            pub const fn tim3smen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "Timer3 clock enable during Sleep mode bit"]
+            pub fn set_tim3smen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Timer 6 clock enable during sleep mode bit"]
+            pub const fn tim6smen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "Timer 6 clock enable during sleep mode bit"]
+            pub fn set_tim6smen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Timer 7 clock enable during Sleep mode bit"]
+            pub const fn tim7smen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "Timer 7 clock enable during Sleep mode bit"]
+            pub fn set_tim7smen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Window watchdog clock enable during sleep mode bit"]
+            pub const fn wwdgsmen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 11usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "Window watchdog clock enable during sleep mode bit"]
+            pub fn set_wwdgsmen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
+            }
+            #[doc = "SPI2 clock enable during sleep mode bit"]
+            pub const fn spi2smen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "SPI2 clock enable during sleep mode bit"]
+            pub fn set_spi2smen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "UART2 clock enable during sleep mode bit"]
+            pub const fn usart2smen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 17usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "UART2 clock enable during sleep mode bit"]
+            pub fn set_usart2smen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
+            }
+            #[doc = "LPUART1 clock enable during sleep mode bit"]
+            pub const fn lpuart1smen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 18usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "LPUART1 clock enable during sleep mode bit"]
+            pub fn set_lpuart1smen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
+            }
+            #[doc = "USART4 clock enable during Sleep mode bit"]
+            pub const fn usart4smen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 19usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "USART4 clock enable during Sleep mode bit"]
+            pub fn set_usart4smen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
+            }
+            #[doc = "USART5 clock enable during Sleep mode bit"]
+            pub const fn usart5smen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 20usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "USART5 clock enable during Sleep mode bit"]
+            pub fn set_usart5smen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize);
+            }
+            #[doc = "I2C1 clock enable during sleep mode bit"]
+            pub const fn i2c1smen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 21usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "I2C1 clock enable during sleep mode bit"]
+            pub fn set_i2c1smen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
+            }
+            #[doc = "I2C2 clock enable during sleep mode bit"]
+            pub const fn i2c2smen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 22usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "I2C2 clock enable during sleep mode bit"]
+            pub fn set_i2c2smen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
+            }
+            #[doc = "USB clock enable during sleep mode bit"]
+            pub const fn usbsmen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 23usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "USB clock enable during sleep mode bit"]
+            pub fn set_usbsmen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize);
+            }
+            #[doc = "Clock recovery system clock enable during sleep mode bit"]
+            pub const fn crssmen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 27usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "Clock recovery system clock enable during sleep mode bit"]
+            pub fn set_crssmen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
+            }
+            #[doc = "Power interface clock enable during sleep mode bit"]
+            pub const fn pwrsmen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "Power interface clock enable during sleep mode bit"]
+            pub fn set_pwrsmen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
+            }
+            #[doc = "DAC interface clock enable during sleep mode bit"]
+            pub const fn dacsmen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 29usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "DAC interface clock enable during sleep mode bit"]
+            pub fn set_dacsmen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
+            }
+            #[doc = "2C3 clock enable during Sleep mode bit"]
+            pub const fn i2c3smen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 30usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "2C3 clock enable during Sleep mode bit"]
+            pub fn set_i2c3smen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize);
+            }
+            #[doc = "Low power timer clock enable during sleep mode bit"]
+            pub const fn lptim1smen(&self) -> super::vals::Lptimsmen {
+                let val = (self.0 >> 31usize) & 0x01;
+                super::vals::Lptimsmen(val as u8)
+            }
+            #[doc = "Low power timer clock enable during sleep mode bit"]
+            pub fn set_lptim1smen(&mut self, val: super::vals::Lptimsmen) {
+                self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
+            }
+        }
+        impl Default for Apb1smenr {
+            fn default() -> Apb1smenr {
+                Apb1smenr(0)
+            }
+        }
+        #[doc = "Clock interrupt clear register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cicr(pub u32);
+        impl Cicr {
+            #[doc = "LSI ready Interrupt clear"]
+            pub const fn lsirdyc(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LSI ready Interrupt clear"]
+            pub fn set_lsirdyc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "LSE ready Interrupt clear"]
+            pub const fn lserdyc(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LSE ready Interrupt clear"]
+            pub fn set_lserdyc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "HSI16 ready Interrupt clear"]
+            pub const fn hsi16rdyc(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "HSI16 ready Interrupt clear"]
+            pub fn set_hsi16rdyc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "HSE ready Interrupt clear"]
+            pub const fn hserdyc(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "HSE ready Interrupt clear"]
+            pub fn set_hserdyc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "PLL ready Interrupt clear"]
+            pub const fn pllrdyc(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "PLL ready Interrupt clear"]
+            pub fn set_pllrdyc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "MSI ready Interrupt clear"]
+            pub const fn msirdyc(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "MSI ready Interrupt clear"]
+            pub fn set_msirdyc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "HSI48 ready Interrupt clear"]
+            pub const fn hsi48rdyc(&self) -> bool {
                 let val = (self.0 >> 6usize) & 0x01;
                 val != 0
             }
-            #[doc = "Transfer Complete (master mode)"]
-            pub fn set_tc(&mut self, val: bool) {
+            #[doc = "HSI48 ready Interrupt clear"]
+            pub fn set_hsi48rdyc(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
             }
-            #[doc = "Transfer Complete Reload"]
-            pub const fn tcr(&self) -> bool {
+            #[doc = "LSE Clock Security System Interrupt clear"]
+            pub const fn csslsec(&self) -> bool {
                 let val = (self.0 >> 7usize) & 0x01;
                 val != 0
             }
-            #[doc = "Transfer Complete Reload"]
-            pub fn set_tcr(&mut self, val: bool) {
+            #[doc = "LSE Clock Security System Interrupt clear"]
+            pub fn set_csslsec(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
             }
-            #[doc = "Bus error"]
-            pub const fn berr(&self) -> bool {
+            #[doc = "Clock Security System Interrupt clear"]
+            pub const fn csshsec(&self) -> bool {
                 let val = (self.0 >> 8usize) & 0x01;
                 val != 0
             }
-            #[doc = "Bus error"]
-            pub fn set_berr(&mut self, val: bool) {
+            #[doc = "Clock Security System Interrupt clear"]
+            pub fn set_csshsec(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
             }
-            #[doc = "Arbitration lost"]
-            pub const fn arlo(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Arbitration lost"]
-            pub fn set_arlo(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "Overrun/Underrun (slave mode)"]
-            pub const fn ovr(&self) -> bool {
-                let val = (self.0 >> 10usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Overrun/Underrun (slave mode)"]
-            pub fn set_ovr(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
-            }
-            #[doc = "PEC Error in reception"]
-            pub const fn pecerr(&self) -> super::vals::Pecerr {
-                let val = (self.0 >> 11usize) & 0x01;
-                super::vals::Pecerr(val as u8)
-            }
-            #[doc = "PEC Error in reception"]
-            pub fn set_pecerr(&mut self, val: super::vals::Pecerr) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
-            }
-            #[doc = "Timeout or t_low detection flag"]
-            pub const fn timeout(&self) -> bool {
-                let val = (self.0 >> 12usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Timeout or t_low detection flag"]
-            pub fn set_timeout(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
-            }
-            #[doc = "SMBus alert"]
-            pub const fn alert(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SMBus alert"]
-            pub fn set_alert(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
-            }
-            #[doc = "Bus busy"]
-            pub const fn busy(&self) -> bool {
-                let val = (self.0 >> 15usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Bus busy"]
-            pub fn set_busy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
-            }
-            #[doc = "Transfer direction (Slave mode)"]
-            pub const fn dir(&self) -> super::vals::Dir {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Dir(val as u8)
-            }
-            #[doc = "Transfer direction (Slave mode)"]
-            pub fn set_dir(&mut self, val: super::vals::Dir) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "Address match code (Slave mode)"]
-            pub const fn addcode(&self) -> u8 {
-                let val = (self.0 >> 17usize) & 0x7f;
-                val as u8
-            }
-            #[doc = "Address match code (Slave mode)"]
-            pub fn set_addcode(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x7f << 17usize)) | (((val as u32) & 0x7f) << 17usize);
+        }
+        impl Default for Cicr {
+            fn default() -> Cicr {
+                Cicr(0)
             }
         }
-        impl Default for Isr {
-            fn default() -> Isr {
-                Isr(0)
-            }
-        }
-        #[doc = "Interrupt clear register"]
+        #[doc = "Clock recovery RC register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Icr(pub u32);
-        impl Icr {
-            #[doc = "Address Matched flag clear"]
-            pub const fn addrcf(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
+        pub struct Crrcr(pub u32);
+        impl Crrcr {
+            #[doc = "48MHz HSI clock enable bit"]
+            pub const fn hsi48on(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
                 val != 0
             }
-            #[doc = "Address Matched flag clear"]
-            pub fn set_addrcf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            #[doc = "48MHz HSI clock enable bit"]
+            pub fn set_hsi48on(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
             }
-            #[doc = "Not Acknowledge flag clear"]
-            pub const fn nackcf(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
+            #[doc = "48MHz HSI clock ready flag"]
+            pub const fn hsi48rdy(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
                 val != 0
             }
-            #[doc = "Not Acknowledge flag clear"]
-            pub fn set_nackcf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            #[doc = "48MHz HSI clock ready flag"]
+            pub fn set_hsi48rdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
             }
-            #[doc = "Stop detection flag clear"]
-            pub const fn stopcf(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
+            #[doc = "48 MHz HSI clock divided by 6 output enable"]
+            pub const fn hsi48div6en(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
                 val != 0
             }
-            #[doc = "Stop detection flag clear"]
-            pub fn set_stopcf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            #[doc = "48 MHz HSI clock divided by 6 output enable"]
+            pub fn set_hsi48div6en(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
             }
-            #[doc = "Bus error flag clear"]
-            pub const fn berrcf(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Bus error flag clear"]
-            pub fn set_berrcf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Arbitration lost flag clear"]
-            pub const fn arlocf(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Arbitration lost flag clear"]
-            pub fn set_arlocf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "Overrun/Underrun flag clear"]
-            pub const fn ovrcf(&self) -> bool {
-                let val = (self.0 >> 10usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Overrun/Underrun flag clear"]
-            pub fn set_ovrcf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
-            }
-            #[doc = "PEC Error flag clear"]
-            pub const fn peccf(&self) -> bool {
-                let val = (self.0 >> 11usize) & 0x01;
-                val != 0
-            }
-            #[doc = "PEC Error flag clear"]
-            pub fn set_peccf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
-            }
-            #[doc = "Timeout detection flag clear"]
-            pub const fn timoutcf(&self) -> bool {
-                let val = (self.0 >> 12usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Timeout detection flag clear"]
-            pub fn set_timoutcf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
-            }
-            #[doc = "Alert flag clear"]
-            pub const fn alertcf(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Alert flag clear"]
-            pub fn set_alertcf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
-            }
-        }
-        impl Default for Icr {
-            fn default() -> Icr {
-                Icr(0)
-            }
-        }
-        #[doc = "Receive data register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Rxdr(pub u32);
-        impl Rxdr {
-            #[doc = "8-bit receive data"]
-            pub const fn rxdata(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0xff;
-                val as u8
-            }
-            #[doc = "8-bit receive data"]
-            pub fn set_rxdata(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
-            }
-        }
-        impl Default for Rxdr {
-            fn default() -> Rxdr {
-                Rxdr(0)
-            }
-        }
-        #[doc = "Timing register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Timingr(pub u32);
-        impl Timingr {
-            #[doc = "SCL low period (master mode)"]
-            pub const fn scll(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0xff;
-                val as u8
-            }
-            #[doc = "SCL low period (master mode)"]
-            pub fn set_scll(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
-            }
-            #[doc = "SCL high period (master mode)"]
-            pub const fn sclh(&self) -> u8 {
+            #[doc = "48 MHz HSI clock calibration"]
+            pub const fn hsi48cal(&self) -> u8 {
                 let val = (self.0 >> 8usize) & 0xff;
                 val as u8
             }
-            #[doc = "SCL high period (master mode)"]
-            pub fn set_sclh(&mut self, val: u8) {
+            #[doc = "48 MHz HSI clock calibration"]
+            pub fn set_hsi48cal(&mut self, val: u8) {
                 self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize);
             }
-            #[doc = "Data hold time"]
-            pub const fn sdadel(&self) -> u8 {
-                let val = (self.0 >> 16usize) & 0x0f;
-                val as u8
-            }
-            #[doc = "Data hold time"]
-            pub fn set_sdadel(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x0f << 16usize)) | (((val as u32) & 0x0f) << 16usize);
-            }
-            #[doc = "Data setup time"]
-            pub const fn scldel(&self) -> u8 {
-                let val = (self.0 >> 20usize) & 0x0f;
-                val as u8
-            }
-            #[doc = "Data setup time"]
-            pub fn set_scldel(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x0f << 20usize)) | (((val as u32) & 0x0f) << 20usize);
-            }
-            #[doc = "Timing prescaler"]
-            pub const fn presc(&self) -> u8 {
-                let val = (self.0 >> 28usize) & 0x0f;
-                val as u8
-            }
-            #[doc = "Timing prescaler"]
-            pub fn set_presc(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x0f << 28usize)) | (((val as u32) & 0x0f) << 28usize);
-            }
         }
-        impl Default for Timingr {
-            fn default() -> Timingr {
-                Timingr(0)
-            }
-        }
-    }
-}
-pub mod exti_v1 {
-    use crate::generic::*;
-    #[doc = "External interrupt/event controller"]
-    #[derive(Copy, Clone)]
-    pub struct Exti(pub *mut u8);
-    unsafe impl Send for Exti {}
-    unsafe impl Sync for Exti {}
-    impl Exti {
-        #[doc = "Interrupt mask register (EXTI_IMR)"]
-        pub fn imr(self) -> Reg<regs::Imr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "Event mask register (EXTI_EMR)"]
-        pub fn emr(self) -> Reg<regs::Emr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "Rising Trigger selection register (EXTI_RTSR)"]
-        pub fn rtsr(self) -> Reg<regs::Rtsr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
-        }
-        #[doc = "Falling Trigger selection register (EXTI_FTSR)"]
-        pub fn ftsr(self) -> Reg<regs::Ftsr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(12usize)) }
-        }
-        #[doc = "Software interrupt event register (EXTI_SWIER)"]
-        pub fn swier(self) -> Reg<regs::Swier, RW> {
-            unsafe { Reg::from_ptr(self.0.add(16usize)) }
-        }
-        #[doc = "Pending register (EXTI_PR)"]
-        pub fn pr(self) -> Reg<regs::Pr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(20usize)) }
-        }
-    }
-    pub mod regs {
-        use crate::generic::*;
-        #[doc = "Software interrupt event register (EXTI_SWIER)"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Swier(pub u32);
-        impl Swier {
-            #[doc = "Software Interrupt on line 0"]
-            pub fn swier(&self, n: usize) -> bool {
-                assert!(n < 23usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Software Interrupt on line 0"]
-            pub fn set_swier(&mut self, n: usize, val: bool) {
-                assert!(n < 23usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Swier {
-            fn default() -> Swier {
-                Swier(0)
-            }
-        }
-        #[doc = "Rising Trigger selection register (EXTI_RTSR)"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Rtsr(pub u32);
-        impl Rtsr {
-            #[doc = "Rising trigger event configuration of line 0"]
-            pub fn tr(&self, n: usize) -> super::vals::Tr {
-                assert!(n < 23usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Tr(val as u8)
-            }
-            #[doc = "Rising trigger event configuration of line 0"]
-            pub fn set_tr(&mut self, n: usize, val: super::vals::Tr) {
-                assert!(n < 23usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Rtsr {
-            fn default() -> Rtsr {
-                Rtsr(0)
-            }
-        }
-        #[doc = "Falling Trigger selection register (EXTI_FTSR)"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ftsr(pub u32);
-        impl Ftsr {
-            #[doc = "Falling trigger event configuration of line 0"]
-            pub fn tr(&self, n: usize) -> super::vals::Tr {
-                assert!(n < 23usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Tr(val as u8)
-            }
-            #[doc = "Falling trigger event configuration of line 0"]
-            pub fn set_tr(&mut self, n: usize, val: super::vals::Tr) {
-                assert!(n < 23usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Ftsr {
-            fn default() -> Ftsr {
-                Ftsr(0)
-            }
-        }
-        #[doc = "Interrupt mask register (EXTI_IMR)"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Imr(pub u32);
-        impl Imr {
-            #[doc = "Interrupt Mask on line 0"]
-            pub fn mr(&self, n: usize) -> super::vals::Mr {
-                assert!(n < 23usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Mr(val as u8)
-            }
-            #[doc = "Interrupt Mask on line 0"]
-            pub fn set_mr(&mut self, n: usize, val: super::vals::Mr) {
-                assert!(n < 23usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Imr {
-            fn default() -> Imr {
-                Imr(0)
-            }
-        }
-        #[doc = "Pending register (EXTI_PR)"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Pr(pub u32);
-        impl Pr {
-            #[doc = "Pending bit 0"]
-            pub fn pr(&self, n: usize) -> bool {
-                assert!(n < 23usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Pending bit 0"]
-            pub fn set_pr(&mut self, n: usize, val: bool) {
-                assert!(n < 23usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Pr {
-            fn default() -> Pr {
-                Pr(0)
-            }
-        }
-        #[doc = "Event mask register (EXTI_EMR)"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Emr(pub u32);
-        impl Emr {
-            #[doc = "Event Mask on line 0"]
-            pub fn mr(&self, n: usize) -> super::vals::Mr {
-                assert!(n < 23usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Mr(val as u8)
-            }
-            #[doc = "Event Mask on line 0"]
-            pub fn set_mr(&mut self, n: usize, val: super::vals::Mr) {
-                assert!(n < 23usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Emr {
-            fn default() -> Emr {
-                Emr(0)
+        impl Default for Crrcr {
+            fn default() -> Crrcr {
+                Crrcr(0)
             }
         }
     }
@@ -2528,657 +2126,692 @@ pub mod exti_v1 {
         use crate::generic::*;
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Tr(pub u8);
-        impl Tr {
-            #[doc = "Falling edge trigger is disabled"]
+        pub struct Dbgsmen(pub u8);
+        impl Dbgsmen {
+            #[doc = "Clock disabled"]
             pub const DISABLED: Self = Self(0);
-            #[doc = "Falling edge trigger is enabled"]
+            #[doc = "Clock enabled"]
             pub const ENABLED: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Mr(pub u8);
-        impl Mr {
-            #[doc = "Interrupt request line is masked"]
-            pub const MASKED: Self = Self(0);
-            #[doc = "Interrupt request line is unmasked"]
-            pub const UNMASKED: Self = Self(0x01);
+        pub struct Lsedrv(pub u8);
+        impl Lsedrv {
+            #[doc = "Lowest drive"]
+            pub const LOW: Self = Self(0);
+            #[doc = "Medium low drive"]
+            pub const MEDIUMLOW: Self = Self(0x01);
+            #[doc = "Medium high drive"]
+            pub const MEDIUMHIGH: Self = Self(0x02);
+            #[doc = "Highest drive"]
+            pub const HIGH: Self = Self(0x03);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Prr(pub u8);
-        impl Prr {
-            #[doc = "No trigger request occurred"]
-            pub const NOTPENDING: Self = Self(0);
-            #[doc = "Selected trigger request occurred"]
-            pub const PENDING: Self = Self(0x01);
+        pub struct Pllsrc(pub u8);
+        impl Pllsrc {
+            #[doc = "HSI selected as PLL input clock"]
+            pub const HSI16: Self = Self(0);
+            #[doc = "HSE selected as PLL input clock"]
+            pub const HSE: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Prw(pub u8);
-        impl Prw {
-            #[doc = "Clears pending bit"]
+        pub struct Hsiouten(pub u8);
+        impl Hsiouten {
+            #[doc = "HSI output clock disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "HSI output clock enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Csslsed(pub u8);
+        impl Csslsed {
+            #[doc = "No failure detected on LSE (32 kHz oscillator)"]
+            pub const NOFAILURE: Self = Self(0);
+            #[doc = "Failure detected on LSE (32 kHz oscillator)"]
+            pub const FAILURE: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Iophrst(pub u8);
+        impl Iophrst {
+            #[doc = "Reset I/O port"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Crcsmen(pub u8);
+        impl Crcsmen {
+            #[doc = "Test integration module clock disabled in Sleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Test integration module clock enabled in Sleep mode (if enabled by CRCEN)"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Mcosel(pub u8);
+        impl Mcosel {
+            #[doc = "No clock"]
+            pub const NOCLOCK: Self = Self(0);
+            #[doc = "SYSCLK clock selected"]
+            pub const SYSCLK: Self = Self(0x01);
+            #[doc = "HSI oscillator clock selected"]
+            pub const HSI16: Self = Self(0x02);
+            #[doc = "MSI oscillator clock selected"]
+            pub const MSI: Self = Self(0x03);
+            #[doc = "HSE oscillator clock selected"]
+            pub const HSE: Self = Self(0x04);
+            #[doc = "PLL clock selected"]
+            pub const PLL: Self = Self(0x05);
+            #[doc = "LSI oscillator clock selected"]
+            pub const LSI: Self = Self(0x06);
+            #[doc = "LSE oscillator clock selected"]
+            pub const LSE: Self = Self(0x07);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Csshsef(pub u8);
+        impl Csshsef {
+            #[doc = "No clock security interrupt caused by HSE clock failure"]
+            pub const NOCLOCK: Self = Self(0);
+            #[doc = "Clock security interrupt caused by HSE clock failure"]
+            pub const CLOCK: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Icsel(pub u8);
+        impl Icsel {
+            #[doc = "APB clock selected as peripheral clock"]
+            pub const APB: Self = Self(0);
+            #[doc = "System clock selected as peripheral clock"]
+            pub const SYSTEM: Self = Self(0x01);
+            #[doc = "HSI16 clock selected as peripheral clock"]
+            pub const HSI16: Self = Self(0x02);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Cryprstw(pub u8);
+        impl Cryprstw {
+            #[doc = "Reset the module"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Iophsmen(pub u8);
+        impl Iophsmen {
+            #[doc = "Port x clock is disabled in Sleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Port x clock is enabled in Sleep mode (if enabled by IOPHEN)"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Pllmul(pub u8);
+        impl Pllmul {
+            #[doc = "PLL clock entry x 3"]
+            pub const MUL3: Self = Self(0);
+            #[doc = "PLL clock entry x 4"]
+            pub const MUL4: Self = Self(0x01);
+            #[doc = "PLL clock entry x 6"]
+            pub const MUL6: Self = Self(0x02);
+            #[doc = "PLL clock entry x 8"]
+            pub const MUL8: Self = Self(0x03);
+            #[doc = "PLL clock entry x 12"]
+            pub const MUL12: Self = Self(0x04);
+            #[doc = "PLL clock entry x 16"]
+            pub const MUL16: Self = Self(0x05);
+            #[doc = "PLL clock entry x 24"]
+            pub const MUL24: Self = Self(0x06);
+            #[doc = "PLL clock entry x 32"]
+            pub const MUL32: Self = Self(0x07);
+            #[doc = "PLL clock entry x 48"]
+            pub const MUL48: Self = Self(0x08);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lsebyp(pub u8);
+        impl Lsebyp {
+            #[doc = "LSE oscillator not bypassed"]
+            pub const NOTBYPASSED: Self = Self(0);
+            #[doc = "LSE oscillator bypassed"]
+            pub const BYPASSED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Hsi16rdyfr(pub u8);
+        impl Hsi16rdyfr {
+            #[doc = "HSI 16 MHz oscillator not ready"]
+            pub const NOTREADY: Self = Self(0);
+            #[doc = "HSI 16 MHz oscillator ready"]
+            pub const READY: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lpwrrstfr(pub u8);
+        impl Lpwrrstfr {
+            #[doc = "No reset has occured"]
+            pub const NORESET: Self = Self(0);
+            #[doc = "A reset has occured"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Dbgrstw(pub u8);
+        impl Dbgrstw {
+            #[doc = "Reset the module"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lptimrstw(pub u8);
+        impl Lptimrstw {
+            #[doc = "Reset the module"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Hsi48rdyfr(pub u8);
+        impl Hsi48rdyfr {
+            #[doc = "No clock ready interrupt"]
+            pub const NOTINTERRUPTED: Self = Self(0);
+            #[doc = "Clock ready interrupt"]
+            pub const INTERRUPTED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Iophen(pub u8);
+        impl Iophen {
+            #[doc = "Port clock disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Port clock enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lptimsel(pub u8);
+        impl Lptimsel {
+            #[doc = "APB clock selected as Timer clock"]
+            pub const APB: Self = Self(0);
+            #[doc = "LSI clock selected as Timer clock"]
+            pub const LSI: Self = Self(0x01);
+            #[doc = "HSI16 clock selected as Timer clock"]
+            pub const HSI16: Self = Self(0x02);
+            #[doc = "LSE clock selected as Timer clock"]
+            pub const LSE: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Rtcsel(pub u8);
+        impl Rtcsel {
+            #[doc = "No clock"]
+            pub const NOCLOCK: Self = Self(0);
+            #[doc = "LSE oscillator clock used as RTC clock"]
+            pub const LSE: Self = Self(0x01);
+            #[doc = "LSI oscillator clock used as RTC clock"]
+            pub const LSI: Self = Self(0x02);
+            #[doc = "HSE oscillator clock divided by a programmable prescaler (selection through the RTCPRE[1:0]
+bits in the RCC clock control register (RCC_CR)) used as the RTC clock"]
+            pub const HSE: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Rtcpre(pub u8);
+        impl Rtcpre {
+            #[doc = "HSE divided by 2"]
+            pub const DIV2: Self = Self(0);
+            #[doc = "HSE divided by 4"]
+            pub const DIV4: Self = Self(0x01);
+            #[doc = "HSE divided by 8"]
+            pub const DIV8: Self = Self(0x02);
+            #[doc = "HSE divided by 16"]
+            pub const DIV16: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lserdy(pub u8);
+        impl Lserdy {
+            #[doc = "Oscillator not ready"]
+            pub const NOTREADY: Self = Self(0);
+            #[doc = "Oscillator ready"]
+            pub const READY: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Sw(pub u8);
+        impl Sw {
+            #[doc = "MSI oscillator used as system clock"]
+            pub const MSI: Self = Self(0);
+            #[doc = "HSI oscillator used as system clock"]
+            pub const HSI16: Self = Self(0x01);
+            #[doc = "HSE oscillator used as system clock"]
+            pub const HSE: Self = Self(0x02);
+            #[doc = "PLL used as system clock"]
+            pub const PLL: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Hserdyr(pub u8);
+        impl Hserdyr {
+            #[doc = "Oscillator is not stable"]
+            pub const NOTREADY: Self = Self(0);
+            #[doc = "Oscillator is stable"]
+            pub const READY: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Csslseon(pub u8);
+        impl Csslseon {
+            #[doc = "Oscillator OFF"]
+            pub const OFF: Self = Self(0);
+            #[doc = "Oscillator ON"]
+            pub const ON: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Csshsecw(pub u8);
+        impl Csshsecw {
+            #[doc = "Clear interrupt flag"]
             pub const CLEAR: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Swierw(pub u8);
-        impl Swierw {
-            #[doc = "Generates an interrupt request"]
-            pub const PEND: Self = Self(0x01);
+        pub struct Hsidivfr(pub u8);
+        impl Hsidivfr {
+            #[doc = "16 MHz HSI clock not divided"]
+            pub const NOTDIVIDED: Self = Self(0);
+            #[doc = "16 MHz HSI clock divided by 4"]
+            pub const DIV4: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Dbgen(pub u8);
+        impl Dbgen {
+            #[doc = "Clock disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Clock enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Rtcen(pub u8);
+        impl Rtcen {
+            #[doc = "RTC clock disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "RTC clock enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Sramsmen(pub u8);
+        impl Sramsmen {
+            #[doc = "NVM interface clock disabled in Sleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "NVM interface clock enabled in Sleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Msirange(pub u8);
+        impl Msirange {
+            #[doc = "range 0 around 65.536 kHz"]
+            pub const RANGE0: Self = Self(0);
+            #[doc = "range 1 around 131.072 kHz"]
+            pub const RANGE1: Self = Self(0x01);
+            #[doc = "range 2 around 262.144 kHz"]
+            pub const RANGE2: Self = Self(0x02);
+            #[doc = "range 3 around 524.288 kHz"]
+            pub const RANGE3: Self = Self(0x03);
+            #[doc = "range 4 around 1.048 MHz"]
+            pub const RANGE4: Self = Self(0x04);
+            #[doc = "range 5 around 2.097 MHz (reset value)"]
+            pub const RANGE5: Self = Self(0x05);
+            #[doc = "range 6 around 4.194 MHz"]
+            pub const RANGE6: Self = Self(0x06);
+            #[doc = "not allowed"]
+            pub const RANGE7: Self = Self(0x07);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Rtcrstw(pub u8);
+        impl Rtcrstw {
+            #[doc = "Resets the RTC peripheral"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Csslse(pub u8);
+        impl Csslse {
+            #[doc = "LSE CSS interrupt disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "LSE CSS interrupt enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Hpre(pub u8);
+        impl Hpre {
+            #[doc = "system clock not divided"]
+            pub const DIV1: Self = Self(0);
+            #[doc = "system clock divided by 2"]
+            pub const DIV2: Self = Self(0x08);
+            #[doc = "system clock divided by 4"]
+            pub const DIV4: Self = Self(0x09);
+            #[doc = "system clock divided by 8"]
+            pub const DIV8: Self = Self(0x0a);
+            #[doc = "system clock divided by 16"]
+            pub const DIV16: Self = Self(0x0b);
+            #[doc = "system clock divided by 64"]
+            pub const DIV64: Self = Self(0x0c);
+            #[doc = "system clock divided by 128"]
+            pub const DIV128: Self = Self(0x0d);
+            #[doc = "system clock divided by 256"]
+            pub const DIV256: Self = Self(0x0e);
+            #[doc = "system clock divided by 512"]
+            pub const DIV512: Self = Self(0x0f);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Hsebyp(pub u8);
+        impl Hsebyp {
+            #[doc = "HSE oscillator not bypassed"]
+            pub const NOTBYPASSED: Self = Self(0);
+            #[doc = "HSE oscillator bypassed"]
+            pub const BYPASSED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lptimen(pub u8);
+        impl Lptimen {
+            #[doc = "Clock disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Clock enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Hsidiven(pub u8);
+        impl Hsidiven {
+            #[doc = "no 16 MHz HSI division requested"]
+            pub const NOTDIVIDED: Self = Self(0);
+            #[doc = "16 MHz HSI division by 4 requested"]
+            pub const DIV4: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lptimsmen(pub u8);
+        impl Lptimsmen {
+            #[doc = "Clock disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Clock enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Plldiv(pub u8);
+        impl Plldiv {
+            #[doc = "PLLVCO / 2"]
+            pub const DIV2: Self = Self(0x01);
+            #[doc = "PLLVCO / 3"]
+            pub const DIV3: Self = Self(0x02);
+            #[doc = "PLLVCO / 4"]
+            pub const DIV4: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Hsirdyie(pub u8);
+        impl Hsirdyie {
+            #[doc = "Ready interrupt disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Ready interrupt enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Dmasmen(pub u8);
+        impl Dmasmen {
+            #[doc = "DMA clock disabled in Sleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "DMA clock enabled in Sleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Rmvfw(pub u8);
+        impl Rmvfw {
+            #[doc = "Clears the reset flag"]
+            pub const CLEAR: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Mcopre(pub u8);
+        impl Mcopre {
+            #[doc = "No division"]
+            pub const DIV1: Self = Self(0);
+            #[doc = "Division by 2"]
+            pub const DIV2: Self = Self(0x01);
+            #[doc = "Division by 4"]
+            pub const DIV4: Self = Self(0x02);
+            #[doc = "Division by 8"]
+            pub const DIV8: Self = Self(0x03);
+            #[doc = "Division by 16"]
+            pub const DIV16: Self = Self(0x04);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ppre(pub u8);
+        impl Ppre {
+            #[doc = "HCLK not divided"]
+            pub const DIV1: Self = Self(0);
+            #[doc = "HCLK divided by 2"]
+            pub const DIV2: Self = Self(0x04);
+            #[doc = "HCLK divided by 4"]
+            pub const DIV4: Self = Self(0x05);
+            #[doc = "HCLK divided by 8"]
+            pub const DIV8: Self = Self(0x06);
+            #[doc = "HCLK divided by 16"]
+            pub const DIV16: Self = Self(0x07);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Stopwuck(pub u8);
+        impl Stopwuck {
+            #[doc = "Internal 64 KHz to 4 MHz (MSI) oscillator selected as wake-up from Stop clock"]
+            pub const MSI: Self = Self(0);
+            #[doc = "Internal 16 MHz (HSI) oscillator selected as wake-up from Stop clock (or HSI16/4 if HSI16DIVEN=1)"]
+            pub const HSI16: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Pllrdyr(pub u8);
+        impl Pllrdyr {
+            #[doc = "PLL unlocked"]
+            pub const UNLOCKED: Self = Self(0);
+            #[doc = "PLL locked"]
+            pub const LOCKED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lpuartsel(pub u8);
+        impl Lpuartsel {
+            #[doc = "APB clock selected as peripheral clock"]
+            pub const APB: Self = Self(0);
+            #[doc = "System clock selected as peripheral clock"]
+            pub const SYSTEM: Self = Self(0x01);
+            #[doc = "HSI16 clock selected as peripheral clock"]
+            pub const HSI16: Self = Self(0x02);
+            #[doc = "LSE clock selected as peripheral clock"]
+            pub const LSE: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Crypen(pub u8);
+        impl Crypen {
+            #[doc = "Clock disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Clock enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Csslsef(pub u8);
+        impl Csslsef {
+            #[doc = "No failure detected on LSE clock failure"]
+            pub const NOFAILURE: Self = Self(0);
+            #[doc = "Failure detected on LSE clock failure"]
+            pub const FAILURE: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Pllon(pub u8);
+        impl Pllon {
+            #[doc = "Clock disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Clock enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Crypsmen(pub u8);
+        impl Crypsmen {
+            #[doc = "Crypto clock disabled in Sleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Crypto clock enabled in Sleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Mifsmen(pub u8);
+        impl Mifsmen {
+            #[doc = "NVM interface clock disabled in Sleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "NVM interface clock enabled in Sleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Sws(pub u8);
+        impl Sws {
+            #[doc = "MSI oscillator used as system clock"]
+            pub const MSI: Self = Self(0);
+            #[doc = "HSI oscillator used as system clock"]
+            pub const HSI16: Self = Self(0x01);
+            #[doc = "HSE oscillator used as system clock"]
+            pub const HSE: Self = Self(0x02);
+            #[doc = "PLL used as system clock"]
+            pub const PLL: Self = Self(0x03);
         }
     }
 }
-pub mod spi_v1 {
+pub mod rng_v1 {
     use crate::generic::*;
-    #[doc = "Serial peripheral interface"]
+    #[doc = "Random number generator"]
     #[derive(Copy, Clone)]
-    pub struct Spi(pub *mut u8);
-    unsafe impl Send for Spi {}
-    unsafe impl Sync for Spi {}
-    impl Spi {
-        #[doc = "control register 1"]
-        pub fn cr1(self) -> Reg<regs::Cr1, RW> {
+    pub struct Rng(pub *mut u8);
+    unsafe impl Send for Rng {}
+    unsafe impl Sync for Rng {}
+    impl Rng {
+        #[doc = "control register"]
+        pub fn cr(self) -> Reg<regs::Cr, RW> {
             unsafe { Reg::from_ptr(self.0.add(0usize)) }
         }
-        #[doc = "control register 2"]
-        pub fn cr2(self) -> Reg<regs::Cr2, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
         #[doc = "status register"]
         pub fn sr(self) -> Reg<regs::Sr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
         }
         #[doc = "data register"]
-        pub fn dr(self) -> Reg<regs::Dr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(12usize)) }
-        }
-        #[doc = "CRC polynomial register"]
-        pub fn crcpr(self) -> Reg<regs::Crcpr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(16usize)) }
-        }
-        #[doc = "RX CRC register"]
-        pub fn rxcrcr(self) -> Reg<regs::Rxcrcr, R> {
-            unsafe { Reg::from_ptr(self.0.add(20usize)) }
-        }
-        #[doc = "TX CRC register"]
-        pub fn txcrcr(self) -> Reg<regs::Txcrcr, R> {
-            unsafe { Reg::from_ptr(self.0.add(24usize)) }
+        pub fn dr(self) -> Reg<u32, R> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
         }
     }
     pub mod regs {
         use crate::generic::*;
-        #[doc = "control register 2"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr2(pub u32);
-        impl Cr2 {
-            #[doc = "Rx buffer DMA enable"]
-            pub const fn rxdmaen(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Rx buffer DMA enable"]
-            pub fn set_rxdmaen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Tx buffer DMA enable"]
-            pub const fn txdmaen(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Tx buffer DMA enable"]
-            pub fn set_txdmaen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "SS output enable"]
-            pub const fn ssoe(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SS output enable"]
-            pub fn set_ssoe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Frame format"]
-            pub const fn frf(&self) -> super::vals::Frf {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Frf(val as u8)
-            }
-            #[doc = "Frame format"]
-            pub fn set_frf(&mut self, val: super::vals::Frf) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Error interrupt enable"]
-            pub const fn errie(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Error interrupt enable"]
-            pub fn set_errie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "RX buffer not empty interrupt enable"]
-            pub const fn rxneie(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "RX buffer not empty interrupt enable"]
-            pub fn set_rxneie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Tx buffer empty interrupt enable"]
-            pub const fn txeie(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Tx buffer empty interrupt enable"]
-            pub fn set_txeie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-        }
-        impl Default for Cr2 {
-            fn default() -> Cr2 {
-                Cr2(0)
-            }
-        }
         #[doc = "status register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
         pub struct Sr(pub u32);
         impl Sr {
-            #[doc = "Receive buffer not empty"]
-            pub const fn rxne(&self) -> bool {
+            #[doc = "Data ready"]
+            pub const fn drdy(&self) -> bool {
                 let val = (self.0 >> 0usize) & 0x01;
                 val != 0
             }
-            #[doc = "Receive buffer not empty"]
-            pub fn set_rxne(&mut self, val: bool) {
+            #[doc = "Data ready"]
+            pub fn set_drdy(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
             }
-            #[doc = "Transmit buffer empty"]
-            pub const fn txe(&self) -> bool {
+            #[doc = "Clock error current status"]
+            pub const fn cecs(&self) -> bool {
                 let val = (self.0 >> 1usize) & 0x01;
                 val != 0
             }
-            #[doc = "Transmit buffer empty"]
-            pub fn set_txe(&mut self, val: bool) {
+            #[doc = "Clock error current status"]
+            pub fn set_cecs(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
             }
-            #[doc = "CRC error flag"]
-            pub const fn crcerr(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
+            #[doc = "Seed error current status"]
+            pub const fn secs(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
                 val != 0
             }
-            #[doc = "CRC error flag"]
-            pub fn set_crcerr(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            #[doc = "Seed error current status"]
+            pub fn set_secs(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
             }
-            #[doc = "Mode fault"]
-            pub const fn modf(&self) -> bool {
+            #[doc = "Clock error interrupt status"]
+            pub const fn ceis(&self) -> bool {
                 let val = (self.0 >> 5usize) & 0x01;
                 val != 0
             }
-            #[doc = "Mode fault"]
-            pub fn set_modf(&mut self, val: bool) {
+            #[doc = "Clock error interrupt status"]
+            pub fn set_ceis(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
             }
-            #[doc = "Overrun flag"]
-            pub const fn ovr(&self) -> bool {
+            #[doc = "Seed error interrupt status"]
+            pub const fn seis(&self) -> bool {
                 let val = (self.0 >> 6usize) & 0x01;
                 val != 0
             }
-            #[doc = "Overrun flag"]
-            pub fn set_ovr(&mut self, val: bool) {
+            #[doc = "Seed error interrupt status"]
+            pub fn set_seis(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
             }
-            #[doc = "Busy flag"]
-            pub const fn bsy(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Busy flag"]
-            pub fn set_bsy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "TI frame format error"]
-            pub const fn fre(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "TI frame format error"]
-            pub fn set_fre(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
         }
         impl Default for Sr {
             fn default() -> Sr {
                 Sr(0)
             }
         }
-        #[doc = "control register 1"]
+        #[doc = "control register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr1(pub u32);
-        impl Cr1 {
-            #[doc = "Clock phase"]
-            pub const fn cpha(&self) -> super::vals::Cpha {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Cpha(val as u8)
-            }
-            #[doc = "Clock phase"]
-            pub fn set_cpha(&mut self, val: super::vals::Cpha) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Clock polarity"]
-            pub const fn cpol(&self) -> super::vals::Cpol {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Cpol(val as u8)
-            }
-            #[doc = "Clock polarity"]
-            pub fn set_cpol(&mut self, val: super::vals::Cpol) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Master selection"]
-            pub const fn mstr(&self) -> super::vals::Mstr {
+        pub struct Cr(pub u32);
+        impl Cr {
+            #[doc = "Random number generator enable"]
+            pub const fn rngen(&self) -> bool {
                 let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Mstr(val as u8)
-            }
-            #[doc = "Master selection"]
-            pub fn set_mstr(&mut self, val: super::vals::Mstr) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Baud rate control"]
-            pub const fn br(&self) -> super::vals::Br {
-                let val = (self.0 >> 3usize) & 0x07;
-                super::vals::Br(val as u8)
-            }
-            #[doc = "Baud rate control"]
-            pub fn set_br(&mut self, val: super::vals::Br) {
-                self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize);
-            }
-            #[doc = "SPI enable"]
-            pub const fn spe(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
                 val != 0
             }
-            #[doc = "SPI enable"]
-            pub fn set_spe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            #[doc = "Random number generator enable"]
+            pub fn set_rngen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
             }
-            #[doc = "Frame format"]
-            pub const fn lsbfirst(&self) -> super::vals::Lsbfirst {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Lsbfirst(val as u8)
-            }
-            #[doc = "Frame format"]
-            pub fn set_lsbfirst(&mut self, val: super::vals::Lsbfirst) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Internal slave select"]
-            pub const fn ssi(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
+            #[doc = "Interrupt enable"]
+            pub const fn ie(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
                 val != 0
             }
-            #[doc = "Internal slave select"]
-            pub fn set_ssi(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Software slave management"]
-            pub const fn ssm(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Software slave management"]
-            pub fn set_ssm(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "Receive only"]
-            pub const fn rxonly(&self) -> super::vals::Rxonly {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Rxonly(val as u8)
-            }
-            #[doc = "Receive only"]
-            pub fn set_rxonly(&mut self, val: super::vals::Rxonly) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "Data frame format"]
-            pub const fn dff(&self) -> super::vals::Dff {
-                let val = (self.0 >> 11usize) & 0x01;
-                super::vals::Dff(val as u8)
-            }
-            #[doc = "Data frame format"]
-            pub fn set_dff(&mut self, val: super::vals::Dff) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
-            }
-            #[doc = "CRC transfer next"]
-            pub const fn crcnext(&self) -> super::vals::Crcnext {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Crcnext(val as u8)
-            }
-            #[doc = "CRC transfer next"]
-            pub fn set_crcnext(&mut self, val: super::vals::Crcnext) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "Hardware CRC calculation enable"]
-            pub const fn crcen(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Hardware CRC calculation enable"]
-            pub fn set_crcen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
-            }
-            #[doc = "Output enable in bidirectional mode"]
-            pub const fn bidioe(&self) -> super::vals::Bidioe {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Bidioe(val as u8)
-            }
-            #[doc = "Output enable in bidirectional mode"]
-            pub fn set_bidioe(&mut self, val: super::vals::Bidioe) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "Bidirectional data mode enable"]
-            pub const fn bidimode(&self) -> super::vals::Bidimode {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Bidimode(val as u8)
-            }
-            #[doc = "Bidirectional data mode enable"]
-            pub fn set_bidimode(&mut self, val: super::vals::Bidimode) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            #[doc = "Interrupt enable"]
+            pub fn set_ie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
             }
         }
-        impl Default for Cr1 {
-            fn default() -> Cr1 {
-                Cr1(0)
+        impl Default for Cr {
+            fn default() -> Cr {
+                Cr(0)
             }
         }
-        #[doc = "TX CRC register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Txcrcr(pub u32);
-        impl Txcrcr {
-            #[doc = "Tx CRC register"]
-            pub const fn tx_crc(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "Tx CRC register"]
-            pub fn set_tx_crc(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
-        }
-        impl Default for Txcrcr {
-            fn default() -> Txcrcr {
-                Txcrcr(0)
-            }
-        }
-        #[doc = "CRC polynomial register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Crcpr(pub u32);
-        impl Crcpr {
-            #[doc = "CRC polynomial register"]
-            pub const fn crcpoly(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "CRC polynomial register"]
-            pub fn set_crcpoly(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
-        }
-        impl Default for Crcpr {
-            fn default() -> Crcpr {
-                Crcpr(0)
-            }
-        }
-        #[doc = "data register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Dr(pub u32);
-        impl Dr {
-            #[doc = "Data register"]
-            pub const fn dr(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "Data register"]
-            pub fn set_dr(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
-        }
-        impl Default for Dr {
-            fn default() -> Dr {
-                Dr(0)
-            }
-        }
-        #[doc = "RX CRC register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Rxcrcr(pub u32);
-        impl Rxcrcr {
-            #[doc = "Rx CRC register"]
-            pub const fn rx_crc(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "Rx CRC register"]
-            pub fn set_rx_crc(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
-        }
-        impl Default for Rxcrcr {
-            fn default() -> Rxcrcr {
-                Rxcrcr(0)
-            }
-        }
-    }
-    pub mod vals {
-        use crate::generic::*;
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Bidioe(pub u8);
-        impl Bidioe {
-            #[doc = "Output disabled (receive-only mode)"]
-            pub const OUTPUTDISABLED: Self = Self(0);
-            #[doc = "Output enabled (transmit-only mode)"]
-            pub const OUTPUTENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Frer(pub u8);
-        impl Frer {
-            #[doc = "No frame format error"]
-            pub const NOERROR: Self = Self(0);
-            #[doc = "A frame format error occurred"]
-            pub const ERROR: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Dff(pub u8);
-        impl Dff {
-            #[doc = "8-bit data frame format is selected for transmission/reception"]
-            pub const EIGHTBIT: Self = Self(0);
-            #[doc = "16-bit data frame format is selected for transmission/reception"]
-            pub const SIXTEENBIT: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Crcnext(pub u8);
-        impl Crcnext {
-            #[doc = "Next transmit value is from Tx buffer"]
-            pub const TXBUFFER: Self = Self(0);
-            #[doc = "Next transmit value is from Tx CRC register"]
-            pub const CRC: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lsbfirst(pub u8);
-        impl Lsbfirst {
-            #[doc = "Data is transmitted/received with the MSB first"]
-            pub const MSBFIRST: Self = Self(0);
-            #[doc = "Data is transmitted/received with the LSB first"]
-            pub const LSBFIRST: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Bidimode(pub u8);
-        impl Bidimode {
-            #[doc = "2-line unidirectional data mode selected"]
-            pub const UNIDIRECTIONAL: Self = Self(0);
-            #[doc = "1-line bidirectional data mode selected"]
-            pub const BIDIRECTIONAL: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Mstr(pub u8);
-        impl Mstr {
-            #[doc = "Slave configuration"]
-            pub const SLAVE: Self = Self(0);
-            #[doc = "Master configuration"]
-            pub const MASTER: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Iscfg(pub u8);
-        impl Iscfg {
-            #[doc = "Slave - transmit"]
-            pub const SLAVETX: Self = Self(0);
-            #[doc = "Slave - receive"]
-            pub const SLAVERX: Self = Self(0x01);
-            #[doc = "Master - transmit"]
-            pub const MASTERTX: Self = Self(0x02);
-            #[doc = "Master - receive"]
-            pub const MASTERRX: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Br(pub u8);
-        impl Br {
-            #[doc = "f_PCLK / 2"]
-            pub const DIV2: Self = Self(0);
-            #[doc = "f_PCLK / 4"]
-            pub const DIV4: Self = Self(0x01);
-            #[doc = "f_PCLK / 8"]
-            pub const DIV8: Self = Self(0x02);
-            #[doc = "f_PCLK / 16"]
-            pub const DIV16: Self = Self(0x03);
-            #[doc = "f_PCLK / 32"]
-            pub const DIV32: Self = Self(0x04);
-            #[doc = "f_PCLK / 64"]
-            pub const DIV64: Self = Self(0x05);
-            #[doc = "f_PCLK / 128"]
-            pub const DIV128: Self = Self(0x06);
-            #[doc = "f_PCLK / 256"]
-            pub const DIV256: Self = Self(0x07);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Rxonly(pub u8);
-        impl Rxonly {
-            #[doc = "Full duplex (Transmit and receive)"]
-            pub const FULLDUPLEX: Self = Self(0);
-            #[doc = "Output disabled (Receive-only mode)"]
-            pub const OUTPUTDISABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Cpol(pub u8);
-        impl Cpol {
-            #[doc = "CK to 0 when idle"]
-            pub const IDLELOW: Self = Self(0);
-            #[doc = "CK to 1 when idle"]
-            pub const IDLEHIGH: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Frf(pub u8);
-        impl Frf {
-            #[doc = "SPI Motorola mode"]
-            pub const MOTOROLA: Self = Self(0);
-            #[doc = "SPI TI mode"]
-            pub const TI: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Cpha(pub u8);
-        impl Cpha {
-            #[doc = "The first clock transition is the first data capture edge"]
-            pub const FIRSTEDGE: Self = Self(0);
-            #[doc = "The second clock transition is the first data capture edge"]
-            pub const SECONDEDGE: Self = Self(0x01);
-        }
-    }
-}
-pub mod generic {
-    use core::marker::PhantomData;
-    #[derive(Copy, Clone)]
-    pub struct RW;
-    #[derive(Copy, Clone)]
-    pub struct R;
-    #[derive(Copy, Clone)]
-    pub struct W;
-    mod sealed {
-        use super::*;
-        pub trait Access {}
-        impl Access for R {}
-        impl Access for W {}
-        impl Access for RW {}
-    }
-    pub trait Access: sealed::Access + Copy {}
-    impl Access for R {}
-    impl Access for W {}
-    impl Access for RW {}
-    pub trait Read: Access {}
-    impl Read for RW {}
-    impl Read for R {}
-    pub trait Write: Access {}
-    impl Write for RW {}
-    impl Write for W {}
-    #[derive(Copy, Clone)]
-    pub struct Reg<T: Copy, A: Access> {
-        ptr: *mut u8,
-        phantom: PhantomData<*mut (T, A)>,
-    }
-    unsafe impl<T: Copy, A: Access> Send for Reg<T, A> {}
-    unsafe impl<T: Copy, A: Access> Sync for Reg<T, A> {}
-    impl<T: Copy, A: Access> Reg<T, A> {
-        pub fn from_ptr(ptr: *mut u8) -> Self {
-            Self {
-                ptr,
-                phantom: PhantomData,
-            }
-        }
-        pub fn ptr(&self) -> *mut T {
-            self.ptr as _
-        }
-    }
-    impl<T: Copy, A: Read> Reg<T, A> {
-        pub unsafe fn read(&self) -> T {
-            (self.ptr as *mut T).read_volatile()
-        }
-    }
-    impl<T: Copy, A: Write> Reg<T, A> {
-        pub unsafe fn write_value(&self, val: T) {
-            (self.ptr as *mut T).write_volatile(val)
-        }
-    }
-    impl<T: Default + Copy, A: Write> Reg<T, A> {
-        pub unsafe fn write<R>(&self, f: impl FnOnce(&mut T) -> R) -> R {
-            let mut val = Default::default();
-            let res = f(&mut val);
-            self.write_value(val);
-            res
-        }
-    }
-    impl<T: Copy, A: Read + Write> Reg<T, A> {
-        pub unsafe fn modify<R>(&self, f: impl FnOnce(&mut T) -> R) -> R {
-            let mut val = self.read();
-            let res = f(&mut val);
-            self.write_value(val);
-            res
-        }
     }
 }
 pub mod rcc_h7 {
@@ -3476,1735 +3109,376 @@ pub mod rcc_h7 {
             unsafe { Reg::from_ptr(self.0.add(380usize)) }
         }
     }
-    pub mod vals {
-        use crate::generic::*;
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Timpre(pub u8);
-        impl Timpre {
-            #[doc = "Timer kernel clock equal to 2x pclk by default"]
-            pub const DEFAULTX2: Self = Self(0);
-            #[doc = "Timer kernel clock equal to 4x pclk by default"]
-            pub const DEFAULTX4: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Apb4enrSyscfgen(pub u8);
-        impl Apb4enrSyscfgen {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Ahb2lpenrDcmilpen(pub u8);
-        impl C1Ahb2lpenrDcmilpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ww1rsc(pub u8);
-        impl Ww1rsc {
-            #[doc = "Clear WWDG1 scope control"]
-            pub const CLEAR: Self = Self(0);
-            #[doc = "Set WWDG1 scope control"]
-            pub const SET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lseon(pub u8);
-        impl Lseon {
-            #[doc = "LSE oscillator Off"]
-            pub const OFF: Self = Self(0);
-            #[doc = "LSE oscillator On"]
-            pub const ON: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Camitfrst(pub u8);
-        impl Camitfrst {
-            #[doc = "Reset the selected module"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lsecssdr(pub u8);
-        impl Lsecssdr {
-            #[doc = "No failure detected on 32 kHz oscillator"]
-            pub const NOFAILURE: Self = Self(0);
-            #[doc = "Failure detected on 32 kHz oscillator"]
-            pub const FAILURE: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Stopwuck(pub u8);
-        impl Stopwuck {
-            #[doc = "HSI selected as wake up clock from system Stop"]
-            pub const HSI: Self = Self(0);
-            #[doc = "CSI selected as wake up clock from system Stop"]
-            pub const CSI: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Gpioarst(pub u8);
-        impl Gpioarst {
-            #[doc = "Reset the selected module"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Apb3lpenrLtdclpen(pub u8);
-        impl C1Apb3lpenrLtdclpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Apb1henrCrsen(pub u8);
-        impl Apb1henrCrsen {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Pll1vcosel(pub u8);
-        impl Pll1vcosel {
-            #[doc = "VCO frequency range 192 to 836 MHz"]
-            pub const WIDEVCO: Self = Self(0);
-            #[doc = "VCO frequency range 150 to 420 MHz"]
-            pub const MEDIUMVCO: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Mdmarst(pub u8);
-        impl Mdmarst {
-            #[doc = "Reset the selected module"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ckpersel(pub u8);
-        impl Ckpersel {
-            #[doc = "HSI selected as peripheral clock"]
-            pub const HSI: Self = Self(0);
-            #[doc = "CSI selected as peripheral clock"]
-            pub const CSI: Self = Self(0x01);
-            #[doc = "HSE selected as peripheral clock"]
-            pub const HSE: Self = Self(0x02);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Ahb4enrGpioaen(pub u8);
-        impl C1Ahb4enrGpioaen {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Usart16sel(pub u8);
-        impl Usart16sel {
-            #[doc = "rcc_pclk2 selected as peripheral clock"]
-            pub const RCC_PCLK2: Self = Self(0);
-            #[doc = "pll2_q selected as peripheral clock"]
-            pub const PLL2_Q: Self = Self(0x01);
-            #[doc = "pll3_q selected as peripheral clock"]
-            pub const PLL3_Q: Self = Self(0x02);
-            #[doc = "hsi_ker selected as peripheral clock"]
-            pub const HSI_KER: Self = Self(0x03);
-            #[doc = "csi_ker selected as peripheral clock"]
-            pub const CSI_KER: Self = Self(0x04);
-            #[doc = "LSE selected as peripheral clock"]
-            pub const LSE: Self = Self(0x05);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Pllsrc(pub u8);
-        impl Pllsrc {
-            #[doc = "HSI selected as PLL clock"]
-            pub const HSI: Self = Self(0);
-            #[doc = "CSI selected as PLL clock"]
-            pub const CSI: Self = Self(0x01);
-            #[doc = "HSE selected as PLL clock"]
-            pub const HSE: Self = Self(0x02);
-            #[doc = "No clock sent to DIVMx dividers and PLLs"]
-            pub const NONE: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct RsrRmvf(pub u8);
-        impl RsrRmvf {
-            #[doc = "Not clearing the the reset flags"]
-            pub const NOTACTIVE: Self = Self(0);
-            #[doc = "Clear the reset flags"]
-            pub const CLEAR: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hsion(pub u8);
-        impl Hsion {
-            #[doc = "Clock Off"]
-            pub const OFF: Self = Self(0);
-            #[doc = "Clock On"]
-            pub const ON: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Apb1lenrTim2en(pub u8);
-        impl C1Apb1lenrTim2en {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Apb2enrTim1en(pub u8);
-        impl Apb2enrTim1en {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lsion(pub u8);
-        impl Lsion {
-            #[doc = "LSI oscillator Off"]
-            pub const OFF: Self = Self(0);
-            #[doc = "LSI oscillator On"]
-            pub const ON: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Apb1llpenrTim2lpen(pub u8);
-        impl C1Apb1llpenrTim2lpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Crsrst(pub u8);
-        impl Crsrst {
-            #[doc = "Reset the selected module"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ahb2lpenrDcmilpen(pub u8);
-        impl Ahb2lpenrDcmilpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Divp1(pub u8);
-        impl Divp1 {
-            #[doc = "pll_p_ck = vco_ck"]
-            pub const DIV1: Self = Self(0);
-            #[doc = "pll_p_ck = vco_ck / 2"]
-            pub const DIV2: Self = Self(0x01);
-            #[doc = "pll_p_ck = vco_ck / 4"]
-            pub const DIV4: Self = Self(0x03);
-            #[doc = "pll_p_ck = vco_ck / 6"]
-            pub const DIV6: Self = Self(0x05);
-            #[doc = "pll_p_ck = vco_ck / 8"]
-            pub const DIV8: Self = Self(0x07);
-            #[doc = "pll_p_ck = vco_ck / 10"]
-            pub const DIV10: Self = Self(0x09);
-            #[doc = "pll_p_ck = vco_ck / 12"]
-            pub const DIV12: Self = Self(0x0b);
-            #[doc = "pll_p_ck = vco_ck / 14"]
-            pub const DIV14: Self = Self(0x0d);
-            #[doc = "pll_p_ck = vco_ck / 16"]
-            pub const DIV16: Self = Self(0x0f);
-            #[doc = "pll_p_ck = vco_ck / 18"]
-            pub const DIV18: Self = Self(0x11);
-            #[doc = "pll_p_ck = vco_ck / 20"]
-            pub const DIV20: Self = Self(0x13);
-            #[doc = "pll_p_ck = vco_ck / 22"]
-            pub const DIV22: Self = Self(0x15);
-            #[doc = "pll_p_ck = vco_ck / 24"]
-            pub const DIV24: Self = Self(0x17);
-            #[doc = "pll_p_ck = vco_ck / 26"]
-            pub const DIV26: Self = Self(0x19);
-            #[doc = "pll_p_ck = vco_ck / 28"]
-            pub const DIV28: Self = Self(0x1b);
-            #[doc = "pll_p_ck = vco_ck / 30"]
-            pub const DIV30: Self = Self(0x1d);
-            #[doc = "pll_p_ck = vco_ck / 32"]
-            pub const DIV32: Self = Self(0x1f);
-            #[doc = "pll_p_ck = vco_ck / 34"]
-            pub const DIV34: Self = Self(0x21);
-            #[doc = "pll_p_ck = vco_ck / 36"]
-            pub const DIV36: Self = Self(0x23);
-            #[doc = "pll_p_ck = vco_ck / 38"]
-            pub const DIV38: Self = Self(0x25);
-            #[doc = "pll_p_ck = vco_ck / 40"]
-            pub const DIV40: Self = Self(0x27);
-            #[doc = "pll_p_ck = vco_ck / 42"]
-            pub const DIV42: Self = Self(0x29);
-            #[doc = "pll_p_ck = vco_ck / 44"]
-            pub const DIV44: Self = Self(0x2b);
-            #[doc = "pll_p_ck = vco_ck / 46"]
-            pub const DIV46: Self = Self(0x2d);
-            #[doc = "pll_p_ck = vco_ck / 48"]
-            pub const DIV48: Self = Self(0x2f);
-            #[doc = "pll_p_ck = vco_ck / 50"]
-            pub const DIV50: Self = Self(0x31);
-            #[doc = "pll_p_ck = vco_ck / 52"]
-            pub const DIV52: Self = Self(0x33);
-            #[doc = "pll_p_ck = vco_ck / 54"]
-            pub const DIV54: Self = Self(0x35);
-            #[doc = "pll_p_ck = vco_ck / 56"]
-            pub const DIV56: Self = Self(0x37);
-            #[doc = "pll_p_ck = vco_ck / 58"]
-            pub const DIV58: Self = Self(0x39);
-            #[doc = "pll_p_ck = vco_ck / 60"]
-            pub const DIV60: Self = Self(0x3b);
-            #[doc = "pll_p_ck = vco_ck / 62"]
-            pub const DIV62: Self = Self(0x3d);
-            #[doc = "pll_p_ck = vco_ck / 64"]
-            pub const DIV64: Self = Self(0x3f);
-            #[doc = "pll_p_ck = vco_ck / 66"]
-            pub const DIV66: Self = Self(0x41);
-            #[doc = "pll_p_ck = vco_ck / 68"]
-            pub const DIV68: Self = Self(0x43);
-            #[doc = "pll_p_ck = vco_ck / 70"]
-            pub const DIV70: Self = Self(0x45);
-            #[doc = "pll_p_ck = vco_ck / 72"]
-            pub const DIV72: Self = Self(0x47);
-            #[doc = "pll_p_ck = vco_ck / 74"]
-            pub const DIV74: Self = Self(0x49);
-            #[doc = "pll_p_ck = vco_ck / 76"]
-            pub const DIV76: Self = Self(0x4b);
-            #[doc = "pll_p_ck = vco_ck / 78"]
-            pub const DIV78: Self = Self(0x4d);
-            #[doc = "pll_p_ck = vco_ck / 80"]
-            pub const DIV80: Self = Self(0x4f);
-            #[doc = "pll_p_ck = vco_ck / 82"]
-            pub const DIV82: Self = Self(0x51);
-            #[doc = "pll_p_ck = vco_ck / 84"]
-            pub const DIV84: Self = Self(0x53);
-            #[doc = "pll_p_ck = vco_ck / 86"]
-            pub const DIV86: Self = Self(0x55);
-            #[doc = "pll_p_ck = vco_ck / 88"]
-            pub const DIV88: Self = Self(0x57);
-            #[doc = "pll_p_ck = vco_ck / 90"]
-            pub const DIV90: Self = Self(0x59);
-            #[doc = "pll_p_ck = vco_ck / 92"]
-            pub const DIV92: Self = Self(0x5b);
-            #[doc = "pll_p_ck = vco_ck / 94"]
-            pub const DIV94: Self = Self(0x5d);
-            #[doc = "pll_p_ck = vco_ck / 96"]
-            pub const DIV96: Self = Self(0x5f);
-            #[doc = "pll_p_ck = vco_ck / 98"]
-            pub const DIV98: Self = Self(0x61);
-            #[doc = "pll_p_ck = vco_ck / 100"]
-            pub const DIV100: Self = Self(0x63);
-            #[doc = "pll_p_ck = vco_ck / 102"]
-            pub const DIV102: Self = Self(0x65);
-            #[doc = "pll_p_ck = vco_ck / 104"]
-            pub const DIV104: Self = Self(0x67);
-            #[doc = "pll_p_ck = vco_ck / 106"]
-            pub const DIV106: Self = Self(0x69);
-            #[doc = "pll_p_ck = vco_ck / 108"]
-            pub const DIV108: Self = Self(0x6b);
-            #[doc = "pll_p_ck = vco_ck / 110"]
-            pub const DIV110: Self = Self(0x6d);
-            #[doc = "pll_p_ck = vco_ck / 112"]
-            pub const DIV112: Self = Self(0x6f);
-            #[doc = "pll_p_ck = vco_ck / 114"]
-            pub const DIV114: Self = Self(0x71);
-            #[doc = "pll_p_ck = vco_ck / 116"]
-            pub const DIV116: Self = Self(0x73);
-            #[doc = "pll_p_ck = vco_ck / 118"]
-            pub const DIV118: Self = Self(0x75);
-            #[doc = "pll_p_ck = vco_ck / 120"]
-            pub const DIV120: Self = Self(0x77);
-            #[doc = "pll_p_ck = vco_ck / 122"]
-            pub const DIV122: Self = Self(0x79);
-            #[doc = "pll_p_ck = vco_ck / 124"]
-            pub const DIV124: Self = Self(0x7b);
-            #[doc = "pll_p_ck = vco_ck / 126"]
-            pub const DIV126: Self = Self(0x7d);
-            #[doc = "pll_p_ck = vco_ck / 128"]
-            pub const DIV128: Self = Self(0x7f);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1RsrRmvf(pub u8);
-        impl C1RsrRmvf {
-            #[doc = "Not clearing the the reset flags"]
-            pub const NOTACTIVE: Self = Self(0);
-            #[doc = "Clear the reset flags"]
-            pub const CLEAR: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hpre(pub u8);
-        impl Hpre {
-            #[doc = "sys_ck not divided"]
-            pub const DIV1: Self = Self(0);
-            #[doc = "sys_ck divided by 2"]
-            pub const DIV2: Self = Self(0x08);
-            #[doc = "sys_ck divided by 4"]
-            pub const DIV4: Self = Self(0x09);
-            #[doc = "sys_ck divided by 8"]
-            pub const DIV8: Self = Self(0x0a);
-            #[doc = "sys_ck divided by 16"]
-            pub const DIV16: Self = Self(0x0b);
-            #[doc = "sys_ck divided by 64"]
-            pub const DIV64: Self = Self(0x0c);
-            #[doc = "sys_ck divided by 128"]
-            pub const DIV128: Self = Self(0x0d);
-            #[doc = "sys_ck divided by 256"]
-            pub const DIV256: Self = Self(0x0e);
-            #[doc = "sys_ck divided by 512"]
-            pub const DIV512: Self = Self(0x0f);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct RsrCpurstfr(pub u8);
-        impl RsrCpurstfr {
-            #[doc = "No reset occoured for block"]
-            pub const NORESETOCCOURED: Self = Self(0);
-            #[doc = "Reset occoured for block"]
-            pub const RESETOCCOURRED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Ahb4lpenrGpioalpen(pub u8);
-        impl C1Ahb4lpenrGpioalpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lptim2sel(pub u8);
-        impl Lptim2sel {
-            #[doc = "rcc_pclk4 selected as peripheral clock"]
-            pub const RCC_PCLK4: Self = Self(0);
-            #[doc = "pll2_p selected as peripheral clock"]
-            pub const PLL2_P: Self = Self(0x01);
-            #[doc = "pll3_r selected as peripheral clock"]
-            pub const PLL3_R: Self = Self(0x02);
-            #[doc = "LSE selected as peripheral clock"]
-            pub const LSE: Self = Self(0x03);
-            #[doc = "LSI selected as peripheral clock"]
-            pub const LSI: Self = Self(0x04);
-            #[doc = "PER selected as peripheral clock"]
-            pub const PER: Self = Self(0x05);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Apb4lpenrSyscfglpen(pub u8);
-        impl C1Apb4lpenrSyscfglpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Divp1en(pub u8);
-        impl Divp1en {
-            #[doc = "Clock ouput is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Clock output is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lsedrv(pub u8);
-        impl Lsedrv {
-            #[doc = "Lowest LSE oscillator driving capability"]
-            pub const LOWEST: Self = Self(0);
-            #[doc = "Medium low LSE oscillator driving capability"]
-            pub const MEDIUMLOW: Self = Self(0x01);
-            #[doc = "Medium high LSE oscillator driving capability"]
-            pub const MEDIUMHIGH: Self = Self(0x02);
-            #[doc = "Highest LSE oscillator driving capability"]
-            pub const HIGHEST: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Tim1rst(pub u8);
-        impl Tim1rst {
-            #[doc = "Reset the selected module"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Apb1henrCrsen(pub u8);
-        impl C1Apb1henrCrsen {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct D3ppre(pub u8);
-        impl D3ppre {
-            #[doc = "rcc_hclk not divided"]
-            pub const DIV1: Self = Self(0);
-            #[doc = "rcc_hclk divided by 2"]
-            pub const DIV2: Self = Self(0x04);
-            #[doc = "rcc_hclk divided by 4"]
-            pub const DIV4: Self = Self(0x05);
-            #[doc = "rcc_hclk divided by 8"]
-            pub const DIV8: Self = Self(0x06);
-            #[doc = "rcc_hclk divided by 16"]
-            pub const DIV16: Self = Self(0x07);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lptim1sel(pub u8);
-        impl Lptim1sel {
-            #[doc = "rcc_pclk1 selected as peripheral clock"]
-            pub const RCC_PCLK1: Self = Self(0);
-            #[doc = "pll2_p selected as peripheral clock"]
-            pub const PLL2_P: Self = Self(0x01);
-            #[doc = "pll3_r selected as peripheral clock"]
-            pub const PLL3_R: Self = Self(0x02);
-            #[doc = "LSE selected as peripheral clock"]
-            pub const LSE: Self = Self(0x03);
-            #[doc = "LSI selected as peripheral clock"]
-            pub const LSI: Self = Self(0x04);
-            #[doc = "PER selected as peripheral clock"]
-            pub const PER: Self = Self(0x05);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Usart234578sel(pub u8);
-        impl Usart234578sel {
-            #[doc = "rcc_pclk1 selected as peripheral clock"]
-            pub const RCC_PCLK1: Self = Self(0);
-            #[doc = "pll2_q selected as peripheral clock"]
-            pub const PLL2_Q: Self = Self(0x01);
-            #[doc = "pll3_q selected as peripheral clock"]
-            pub const PLL3_Q: Self = Self(0x02);
-            #[doc = "hsi_ker selected as peripheral clock"]
-            pub const HSI_KER: Self = Self(0x03);
-            #[doc = "csi_ker selected as peripheral clock"]
-            pub const CSI_KER: Self = Self(0x04);
-            #[doc = "LSE selected as peripheral clock"]
-            pub const LSE: Self = Self(0x05);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lpuart1sel(pub u8);
-        impl Lpuart1sel {
-            #[doc = "rcc_pclk_d3 selected as peripheral clock"]
-            pub const RCC_PCLK_D3: Self = Self(0);
-            #[doc = "pll2_q selected as peripheral clock"]
-            pub const PLL2_Q: Self = Self(0x01);
-            #[doc = "pll3_q selected as peripheral clock"]
-            pub const PLL3_Q: Self = Self(0x02);
-            #[doc = "hsi_ker selected as peripheral clock"]
-            pub const HSI_KER: Self = Self(0x03);
-            #[doc = "csi_ker selected as peripheral clock"]
-            pub const CSI_KER: Self = Self(0x04);
-            #[doc = "LSE selected as peripheral clock"]
-            pub const LSE: Self = Self(0x05);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Dfsdm1sel(pub u8);
-        impl Dfsdm1sel {
-            #[doc = "rcc_pclk2 selected as peripheral clock"]
-            pub const RCC_PCLK2: Self = Self(0);
-            #[doc = "System clock selected as peripheral clock"]
-            pub const SYS: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Ahb3enrMdmaen(pub u8);
-        impl C1Ahb3enrMdmaen {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hsirdyr(pub u8);
-        impl Hsirdyr {
-            #[doc = "Clock not ready"]
-            pub const NOTREADY: Self = Self(0);
-            #[doc = "Clock ready"]
-            pub const READY: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Adcsel(pub u8);
-        impl Adcsel {
-            #[doc = "pll2_p selected as peripheral clock"]
-            pub const PLL2_P: Self = Self(0);
-            #[doc = "pll3_r selected as peripheral clock"]
-            pub const PLL3_R: Self = Self(0x01);
-            #[doc = "PER selected as peripheral clock"]
-            pub const PER: Self = Self(0x02);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ahb4enrGpioaen(pub u8);
-        impl Ahb4enrGpioaen {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hsidivfr(pub u8);
-        impl Hsidivfr {
-            #[doc = "New HSIDIV ratio has not yet propagated to hsi_ck"]
-            pub const NOTPROPAGATED: Self = Self(0);
-            #[doc = "HSIDIV ratio has propagated to hsi_ck"]
-            pub const PROPAGATED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Ahb1enrDma1en(pub u8);
-        impl C1Ahb1enrDma1en {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hsidiv(pub u8);
-        impl Hsidiv {
-            #[doc = "No division"]
-            pub const DIV1: Self = Self(0);
-            #[doc = "Division by 2"]
-            pub const DIV2: Self = Self(0x01);
-            #[doc = "Division by 4"]
-            pub const DIV4: Self = Self(0x02);
-            #[doc = "Division by 8"]
-            pub const DIV8: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Swpsel(pub u8);
-        impl Swpsel {
-            #[doc = "pclk selected as peripheral clock"]
-            pub const PCLK: Self = Self(0);
-            #[doc = "hsi_ker selected as peripheral clock"]
-            pub const HSI_KER: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Apb2lpenrTim1lpen(pub u8);
-        impl C1Apb2lpenrTim1lpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Tim2rst(pub u8);
-        impl Tim2rst {
-            #[doc = "Reset the selected module"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Ahb3lpenrMdmalpen(pub u8);
-        impl C1Ahb3lpenrMdmalpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct I2c123sel(pub u8);
-        impl I2c123sel {
-            #[doc = "rcc_pclk1 selected as peripheral clock"]
-            pub const RCC_PCLK1: Self = Self(0);
-            #[doc = "pll3_r selected as peripheral clock"]
-            pub const PLL3_R: Self = Self(0x01);
-            #[doc = "hsi_ker selected as peripheral clock"]
-            pub const HSI_KER: Self = Self(0x02);
-            #[doc = "csi_ker selected as peripheral clock"]
-            pub const CSI_KER: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Pll1fracen(pub u8);
-        impl Pll1fracen {
-            #[doc = "Reset latch to tranfer FRACN to the Sigma-Delta modulator"]
-            pub const RESET: Self = Self(0);
-            #[doc = "Set latch to tranfer FRACN to the Sigma-Delta modulator"]
-            pub const SET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Apb3lpenrLtdclpen(pub u8);
-        impl Apb3lpenrLtdclpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Ahb2enrDcmien(pub u8);
-        impl C1Ahb2enrDcmien {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Cecsel(pub u8);
-        impl Cecsel {
-            #[doc = "LSE selected as peripheral clock"]
-            pub const LSE: Self = Self(0);
-            #[doc = "LSI selected as peripheral clock"]
-            pub const LSI: Self = Self(0x01);
-            #[doc = "csi_ker selected as peripheral clock"]
-            pub const CSI_KER: Self = Self(0x02);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ahb1enrDma1en(pub u8);
-        impl Ahb1enrDma1en {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hsebyp(pub u8);
-        impl Hsebyp {
-            #[doc = "HSE crystal oscillator not bypassed"]
-            pub const NOTBYPASSED: Self = Self(0);
-            #[doc = "HSE crystal oscillator bypassed with external clock"]
-            pub const BYPASSED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ltdcrst(pub u8);
-        impl Ltdcrst {
-            #[doc = "Reset the selected module"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Apb1lenrTim2en(pub u8);
-        impl Apb1lenrTim2en {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Apb2lpenrTim1lpen(pub u8);
-        impl Apb2lpenrTim1lpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ahb4lpenrGpioalpen(pub u8);
-        impl Ahb4lpenrGpioalpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ahb1lpenrDma1lpen(pub u8);
-        impl Ahb1lpenrDma1lpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Rtcsel(pub u8);
-        impl Rtcsel {
-            #[doc = "No clock"]
-            pub const NOCLOCK: Self = Self(0);
-            #[doc = "LSE oscillator clock used as RTC clock"]
-            pub const LSE: Self = Self(0x01);
-            #[doc = "LSI oscillator clock used as RTC clock"]
-            pub const LSI: Self = Self(0x02);
-            #[doc = "HSE oscillator clock divided by a prescaler used as RTC clock"]
-            pub const HSE: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Apb1hlpenrCrslpen(pub u8);
-        impl Apb1hlpenrCrslpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Apb4enrSyscfgen(pub u8);
-        impl C1Apb4enrSyscfgen {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Spi6sel(pub u8);
-        impl Spi6sel {
-            #[doc = "rcc_pclk4 selected as peripheral clock"]
-            pub const RCC_PCLK4: Self = Self(0);
-            #[doc = "pll2_q selected as peripheral clock"]
-            pub const PLL2_Q: Self = Self(0x01);
-            #[doc = "pll3_q selected as peripheral clock"]
-            pub const PLL3_Q: Self = Self(0x02);
-            #[doc = "hsi_ker selected as peripheral clock"]
-            pub const HSI_KER: Self = Self(0x03);
-            #[doc = "csi_ker selected as peripheral clock"]
-            pub const CSI_KER: Self = Self(0x04);
-            #[doc = "HSE selected as peripheral clock"]
-            pub const HSE: Self = Self(0x05);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hrtimsel(pub u8);
-        impl Hrtimsel {
-            #[doc = "The HRTIM prescaler clock source is the same as other timers (rcc_timy_ker_ck)"]
-            pub const TIMY_KER: Self = Self(0);
-            #[doc = "The HRTIM prescaler clock source is the CPU clock (c_ck)"]
-            pub const C_CK: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ahb3enrMdmaen(pub u8);
-        impl Ahb3enrMdmaen {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Apb3enrLtdcen(pub u8);
-        impl C1Apb3enrLtdcen {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Pll1rge(pub u8);
-        impl Pll1rge {
-            #[doc = "Frequency is between 1 and 2 MHz"]
-            pub const RANGE1: Self = Self(0);
-            #[doc = "Frequency is between 2 and 4 MHz"]
-            pub const RANGE2: Self = Self(0x01);
-            #[doc = "Frequency is between 4 and 8 MHz"]
-            pub const RANGE4: Self = Self(0x02);
-            #[doc = "Frequency is between 8 and 16 MHz"]
-            pub const RANGE8: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Rtcen(pub u8);
-        impl Rtcen {
-            #[doc = "RTC clock disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "RTC clock enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Dma1rst(pub u8);
-        impl Dma1rst {
-            #[doc = "Reset the selected module"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lsirdyie(pub u8);
-        impl Lsirdyie {
-            #[doc = "Interrupt disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Interrupt enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct I2c4sel(pub u8);
-        impl I2c4sel {
-            #[doc = "rcc_pclk4 selected as peripheral clock"]
-            pub const RCC_PCLK4: Self = Self(0);
-            #[doc = "pll3_r selected as peripheral clock"]
-            pub const PLL3_R: Self = Self(0x01);
-            #[doc = "hsi_ker selected as peripheral clock"]
-            pub const HSI_KER: Self = Self(0x02);
-            #[doc = "csi_ker selected as peripheral clock"]
-            pub const CSI_KER: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Sai1sel(pub u8);
-        impl Sai1sel {
-            #[doc = "pll1_q selected as peripheral clock"]
-            pub const PLL1_Q: Self = Self(0);
-            #[doc = "pll2_p selected as peripheral clock"]
-            pub const PLL2_P: Self = Self(0x01);
-            #[doc = "pll3_p selected as peripheral clock"]
-            pub const PLL3_P: Self = Self(0x02);
-            #[doc = "I2S_CKIN selected as peripheral clock"]
-            pub const I2S_CKIN: Self = Self(0x03);
-            #[doc = "PER selected as peripheral clock"]
-            pub const PER: Self = Self(0x04);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Apb2enrTim1en(pub u8);
-        impl C1Apb2enrTim1en {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Ahb1lpenrDma1lpen(pub u8);
-        impl C1Ahb1lpenrDma1lpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Usbsel(pub u8);
-        impl Usbsel {
-            #[doc = "Disable the kernel clock"]
-            pub const DISABLE: Self = Self(0);
-            #[doc = "pll1_q selected as peripheral clock"]
-            pub const PLL1_Q: Self = Self(0x01);
-            #[doc = "pll3_q selected as peripheral clock"]
-            pub const PLL3_Q: Self = Self(0x02);
-            #[doc = "HSI48 selected as peripheral clock"]
-            pub const HSI48: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1RsrCpurstfr(pub u8);
-        impl C1RsrCpurstfr {
-            #[doc = "No reset occoured for block"]
-            pub const NORESETOCCOURED: Self = Self(0);
-            #[doc = "Reset occoured for block"]
-            pub const RESETOCCOURRED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Fmcsel(pub u8);
-        impl Fmcsel {
-            #[doc = "rcc_hclk3 selected as peripheral clock"]
-            pub const RCC_HCLK3: Self = Self(0);
-            #[doc = "pll1_q selected as peripheral clock"]
-            pub const PLL1_Q: Self = Self(0x01);
-            #[doc = "pll2_r selected as peripheral clock"]
-            pub const PLL2_R: Self = Self(0x02);
-            #[doc = "PER selected as peripheral clock"]
-            pub const PER: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Mco2(pub u8);
-        impl Mco2 {
-            #[doc = "System clock selected for micro-controller clock output"]
-            pub const SYSCLK: Self = Self(0);
-            #[doc = "pll2_p selected for micro-controller clock output"]
-            pub const PLL2_P: Self = Self(0x01);
-            #[doc = "HSE selected for micro-controller clock output"]
-            pub const HSE: Self = Self(0x02);
-            #[doc = "pll1_p selected for micro-controller clock output"]
-            pub const PLL1_P: Self = Self(0x03);
-            #[doc = "CSI selected for micro-controller clock output"]
-            pub const CSI: Self = Self(0x04);
-            #[doc = "LSI selected for micro-controller clock output"]
-            pub const LSI: Self = Self(0x05);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Mco1(pub u8);
-        impl Mco1 {
-            #[doc = "HSI selected for micro-controller clock output"]
-            pub const HSI: Self = Self(0);
-            #[doc = "LSE selected for micro-controller clock output"]
-            pub const LSE: Self = Self(0x01);
-            #[doc = "HSE selected for micro-controller clock output"]
-            pub const HSE: Self = Self(0x02);
-            #[doc = "pll1_q selected for micro-controller clock output"]
-            pub const PLL1_Q: Self = Self(0x03);
-            #[doc = "HSI48 selected for micro-controller clock output"]
-            pub const HSI48: Self = Self(0x04);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Bdrst(pub u8);
-        impl Bdrst {
-            #[doc = "Resets the entire VSW domain"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lsebyp(pub u8);
-        impl Lsebyp {
-            #[doc = "LSE crystal oscillator not bypassed"]
-            pub const NOTBYPASSED: Self = Self(0);
-            #[doc = "LSE crystal oscillator bypassed with external clock"]
-            pub const BYPASSED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Sdmmcsel(pub u8);
-        impl Sdmmcsel {
-            #[doc = "pll1_q selected as peripheral clock"]
-            pub const PLL1_Q: Self = Self(0);
-            #[doc = "pll2_r selected as peripheral clock"]
-            pub const PLL2_R: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Apb1llpenrTim2lpen(pub u8);
-        impl Apb1llpenrTim2lpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct C1Apb1hlpenrCrslpen(pub u8);
-        impl C1Apb1hlpenrCrslpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Spdifsel(pub u8);
-        impl Spdifsel {
-            #[doc = "pll1_q selected as peripheral clock"]
-            pub const PLL1_Q: Self = Self(0);
-            #[doc = "pll2_r selected as peripheral clock"]
-            pub const PLL2_R: Self = Self(0x01);
-            #[doc = "pll3_r selected as peripheral clock"]
-            pub const PLL3_R: Self = Self(0x02);
-            #[doc = "hsi_ker selected as peripheral clock"]
-            pub const HSI_KER: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lserdyr(pub u8);
-        impl Lserdyr {
-            #[doc = "LSE oscillator not ready"]
-            pub const NOTREADY: Self = Self(0);
-            #[doc = "LSE oscillator ready"]
-            pub const READY: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Spi45sel(pub u8);
-        impl Spi45sel {
-            #[doc = "APB clock selected as peripheral clock"]
-            pub const APB: Self = Self(0);
-            #[doc = "pll2_q selected as peripheral clock"]
-            pub const PLL2_Q: Self = Self(0x01);
-            #[doc = "pll3_q selected as peripheral clock"]
-            pub const PLL3_Q: Self = Self(0x02);
-            #[doc = "hsi_ker selected as peripheral clock"]
-            pub const HSI_KER: Self = Self(0x03);
-            #[doc = "csi_ker selected as peripheral clock"]
-            pub const CSI_KER: Self = Self(0x04);
-            #[doc = "HSE selected as peripheral clock"]
-            pub const HSE: Self = Self(0x05);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Bdmaamen(pub u8);
-        impl Bdmaamen {
-            #[doc = "Clock disabled in autonomous mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Clock enabled in autonomous mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ahb3lpenrMdmalpen(pub u8);
-        impl Ahb3lpenrMdmalpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Sw(pub u8);
-        impl Sw {
-            #[doc = "HSI selected as system clock"]
-            pub const HSI: Self = Self(0);
-            #[doc = "CSI selected as system clock"]
-            pub const CSI: Self = Self(0x01);
-            #[doc = "HSE selected as system clock"]
-            pub const HSE: Self = Self(0x02);
-            #[doc = "PLL1 selected as system clock"]
-            pub const PLL1: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct D2ppre1(pub u8);
-        impl D2ppre1 {
-            #[doc = "rcc_hclk not divided"]
-            pub const DIV1: Self = Self(0);
-            #[doc = "rcc_hclk divided by 2"]
-            pub const DIV2: Self = Self(0x04);
-            #[doc = "rcc_hclk divided by 4"]
-            pub const DIV4: Self = Self(0x05);
-            #[doc = "rcc_hclk divided by 8"]
-            pub const DIV8: Self = Self(0x06);
-            #[doc = "rcc_hclk divided by 16"]
-            pub const DIV16: Self = Self(0x07);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct D1ppre(pub u8);
-        impl D1ppre {
-            #[doc = "rcc_hclk not divided"]
-            pub const DIV1: Self = Self(0);
-            #[doc = "rcc_hclk divided by 2"]
-            pub const DIV2: Self = Self(0x04);
-            #[doc = "rcc_hclk divided by 4"]
-            pub const DIV4: Self = Self(0x05);
-            #[doc = "rcc_hclk divided by 8"]
-            pub const DIV8: Self = Self(0x06);
-            #[doc = "rcc_hclk divided by 16"]
-            pub const DIV16: Self = Self(0x07);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Syscfgrst(pub u8);
-        impl Syscfgrst {
-            #[doc = "Reset the selected module"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Sai4asel(pub u8);
-        impl Sai4asel {
-            #[doc = "pll1_q selected as peripheral clock"]
-            pub const PLL1_Q: Self = Self(0);
-            #[doc = "pll2_p selected as peripheral clock"]
-            pub const PLL2_P: Self = Self(0x01);
-            #[doc = "pll3_p selected as peripheral clock"]
-            pub const PLL3_P: Self = Self(0x02);
-            #[doc = "i2s_ckin selected as peripheral clock"]
-            pub const I2S_CKIN: Self = Self(0x03);
-            #[doc = "PER selected as peripheral clock"]
-            pub const PER: Self = Self(0x04);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Apb4lpenrSyscfglpen(pub u8);
-        impl Apb4lpenrSyscfglpen {
-            #[doc = "The selected clock is disabled during csleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled during csleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Apb3enrLtdcen(pub u8);
-        impl Apb3enrLtdcen {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ahb2enrDcmien(pub u8);
-        impl Ahb2enrDcmien {
-            #[doc = "The selected clock is disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "The selected clock is enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Rngsel(pub u8);
-        impl Rngsel {
-            #[doc = "HSI48 selected as peripheral clock"]
-            pub const HSI48: Self = Self(0);
-            #[doc = "pll1_q selected as peripheral clock"]
-            pub const PLL1_Q: Self = Self(0x01);
-            #[doc = "LSE selected as peripheral clock"]
-            pub const LSE: Self = Self(0x02);
-            #[doc = "LSI selected as peripheral clock"]
-            pub const LSI: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Swsr(pub u8);
-        impl Swsr {
-            #[doc = "HSI oscillator used as system clock"]
-            pub const HSI: Self = Self(0);
-            #[doc = "CSI oscillator used as system clock"]
-            pub const CSI: Self = Self(0x01);
-            #[doc = "HSE oscillator used as system clock"]
-            pub const HSE: Self = Self(0x02);
-            #[doc = "PLL1 used as system clock"]
-            pub const PLL1: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Fdcansel(pub u8);
-        impl Fdcansel {
-            #[doc = "HSE selected as peripheral clock"]
-            pub const HSE: Self = Self(0);
-            #[doc = "pll1_q selected as peripheral clock"]
-            pub const PLL1_Q: Self = Self(0x01);
-            #[doc = "pll2_q selected as peripheral clock"]
-            pub const PLL2_Q: Self = Self(0x02);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lsirdyr(pub u8);
-        impl Lsirdyr {
-            #[doc = "LSI oscillator not ready"]
-            pub const NOTREADY: Self = Self(0);
-            #[doc = "LSI oscillator ready"]
-            pub const READY: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lsirdyc(pub u8);
-        impl Lsirdyc {
-            #[doc = "Clear interrupt flag"]
-            pub const CLEAR: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lsecsson(pub u8);
-        impl Lsecsson {
-            #[doc = "Clock security system on 32 kHz oscillator off"]
-            pub const SECURITYOFF: Self = Self(0);
-            #[doc = "Clock security system on 32 kHz oscillator on"]
-            pub const SECURITYON: Self = Self(0x01);
-        }
-    }
     pub mod regs {
         use crate::generic::*;
-        #[doc = "RCC APB1 Peripheral Reset Register"]
+        #[doc = "RCC APB3 Sleep Clock Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb1hrstr(pub u32);
-        impl Apb1hrstr {
-            #[doc = "Clock Recovery System reset"]
-            pub const fn crsrst(&self) -> super::vals::Crsrst {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Crsrst(val as u8)
-            }
-            #[doc = "Clock Recovery System reset"]
-            pub fn set_crsrst(&mut self, val: super::vals::Crsrst) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "SWPMI block reset"]
-            pub const fn swprst(&self) -> super::vals::Crsrst {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Crsrst(val as u8)
-            }
-            #[doc = "SWPMI block reset"]
-            pub fn set_swprst(&mut self, val: super::vals::Crsrst) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "OPAMP block reset"]
-            pub const fn opamprst(&self) -> super::vals::Crsrst {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Crsrst(val as u8)
-            }
-            #[doc = "OPAMP block reset"]
-            pub fn set_opamprst(&mut self, val: super::vals::Crsrst) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "MDIOS block reset"]
-            pub const fn mdiosrst(&self) -> super::vals::Crsrst {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Crsrst(val as u8)
-            }
-            #[doc = "MDIOS block reset"]
-            pub fn set_mdiosrst(&mut self, val: super::vals::Crsrst) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "FDCAN block reset"]
-            pub const fn fdcanrst(&self) -> super::vals::Crsrst {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::Crsrst(val as u8)
-            }
-            #[doc = "FDCAN block reset"]
-            pub fn set_fdcanrst(&mut self, val: super::vals::Crsrst) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
-            }
-        }
-        impl Default for Apb1hrstr {
-            fn default() -> Apb1hrstr {
-                Apb1hrstr(0)
-            }
-        }
-        #[doc = "RCC AHB4 Sleep Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ahb4lpenr(pub u32);
-        impl Ahb4lpenr {
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioalpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioalpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioblpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioblpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioclpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioclpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpiodlpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+        pub struct Apb3lpenr(pub u32);
+        impl Apb3lpenr {
+            #[doc = "LTDC peripheral clock enable during CSleep mode"]
+            pub const fn ltdclpen(&self) -> super::vals::Apb3lpenrLtdclpen {
                 let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
+                super::vals::Apb3lpenrLtdclpen(val as u8)
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpiodlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+            #[doc = "LTDC peripheral clock enable during CSleep mode"]
+            pub fn set_ltdclpen(&mut self, val: super::vals::Apb3lpenrLtdclpen) {
                 self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioelpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioelpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioflpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioflpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioglpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+            #[doc = "WWDG1 Clock Enable During CSleep Mode"]
+            pub const fn wwdg1lpen(&self) -> super::vals::Apb3lpenrLtdclpen {
                 let val = (self.0 >> 6usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
+                super::vals::Apb3lpenrLtdclpen(val as u8)
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioglpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+            #[doc = "WWDG1 Clock Enable During CSleep Mode"]
+            pub fn set_wwdg1lpen(&mut self, val: super::vals::Apb3lpenrLtdclpen) {
                 self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpiohlpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpiohlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioilpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioilpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpiojlpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpiojlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioklpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioklpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "CRC peripheral clock enable during CSleep mode"]
-            pub const fn crclpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 19usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "CRC peripheral clock enable during CSleep mode"]
-            pub fn set_crclpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
-            }
-            #[doc = "BDMA Clock Enable During CSleep Mode"]
-            pub const fn bdmalpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 21usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "BDMA Clock Enable During CSleep Mode"]
-            pub fn set_bdmalpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
-            }
-            #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn adc3lpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 24usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_adc3lpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
-            }
-            #[doc = "Backup RAM Clock Enable During CSleep Mode"]
-            pub const fn bkpramlpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "Backup RAM Clock Enable During CSleep Mode"]
-            pub fn set_bkpramlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
-            }
-            #[doc = "SRAM4 Clock Enable During CSleep Mode"]
-            pub const fn sram4lpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 29usize) & 0x01;
-                super::vals::Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "SRAM4 Clock Enable During CSleep Mode"]
-            pub fn set_sram4lpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
+        }
+        impl Default for Apb3lpenr {
+            fn default() -> Apb3lpenr {
+                Apb3lpenr(0)
             }
         }
-        impl Default for Ahb4lpenr {
-            fn default() -> Ahb4lpenr {
-                Ahb4lpenr(0)
-            }
-        }
-        #[doc = "RCC AHB3 Sleep Clock Register"]
+        #[doc = "RCC AHB2 Clock Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ahb3lpenr(pub u32);
-        impl Ahb3lpenr {
-            #[doc = "MDMA Clock Enable During CSleep Mode"]
-            pub const fn mdmalpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+        pub struct C1Ahb2enr(pub u32);
+        impl C1Ahb2enr {
+            #[doc = "DCMI peripheral clock"]
+            pub const fn dcmien(&self) -> super::vals::C1Ahb2enrDcmien {
                 let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Ahb3lpenrMdmalpen(val as u8)
+                super::vals::C1Ahb2enrDcmien(val as u8)
             }
-            #[doc = "MDMA Clock Enable During CSleep Mode"]
-            pub fn set_mdmalpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+            #[doc = "DCMI peripheral clock"]
+            pub fn set_dcmien(&mut self, val: super::vals::C1Ahb2enrDcmien) {
                 self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
             }
-            #[doc = "DMA2D Clock Enable During CSleep Mode"]
-            pub const fn dma2dlpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+            #[doc = "CRYPT peripheral clock enable"]
+            pub const fn crypten(&self) -> super::vals::C1Ahb2enrDcmien {
                 let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Ahb3lpenrMdmalpen(val as u8)
+                super::vals::C1Ahb2enrDcmien(val as u8)
             }
-            #[doc = "DMA2D Clock Enable During CSleep Mode"]
-            pub fn set_dma2dlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+            #[doc = "CRYPT peripheral clock enable"]
+            pub fn set_crypten(&mut self, val: super::vals::C1Ahb2enrDcmien) {
                 self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
             }
-            #[doc = "JPGDEC Clock Enable During CSleep Mode"]
-            pub const fn jpgdeclpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+            #[doc = "HASH peripheral clock enable"]
+            pub const fn hashen(&self) -> super::vals::C1Ahb2enrDcmien {
                 let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Ahb3lpenrMdmalpen(val as u8)
+                super::vals::C1Ahb2enrDcmien(val as u8)
             }
-            #[doc = "JPGDEC Clock Enable During CSleep Mode"]
-            pub fn set_jpgdeclpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+            #[doc = "HASH peripheral clock enable"]
+            pub fn set_hashen(&mut self, val: super::vals::C1Ahb2enrDcmien) {
                 self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
             }
-            #[doc = "FLITF Clock Enable During CSleep Mode"]
-            pub const fn flashlpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::Ahb3lpenrMdmalpen(val as u8)
+            #[doc = "RNG peripheral clocks enable"]
+            pub const fn rngen(&self) -> super::vals::C1Ahb2enrDcmien {
+                let val = (self.0 >> 6usize) & 0x01;
+                super::vals::C1Ahb2enrDcmien(val as u8)
             }
-            #[doc = "FLITF Clock Enable During CSleep Mode"]
-            pub fn set_flashlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            #[doc = "RNG peripheral clocks enable"]
+            pub fn set_rngen(&mut self, val: super::vals::C1Ahb2enrDcmien) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
             }
-            #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn fmclpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Ahb3lpenrMdmalpen(val as u8)
+            #[doc = "SDMMC2 and SDMMC2 delay clock enable"]
+            pub const fn sdmmc2en(&self) -> super::vals::C1Ahb2enrDcmien {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::C1Ahb2enrDcmien(val as u8)
             }
-            #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_fmclpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            #[doc = "SDMMC2 and SDMMC2 delay clock enable"]
+            pub fn set_sdmmc2en(&mut self, val: super::vals::C1Ahb2enrDcmien) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
             }
-            #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"]
-            pub const fn qspilpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Ahb3lpenrMdmalpen(val as u8)
-            }
-            #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"]
-            pub fn set_qspilpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"]
-            pub const fn sdmmc1lpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Ahb3lpenrMdmalpen(val as u8)
-            }
-            #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"]
-            pub fn set_sdmmc1lpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"]
-            pub const fn d1dtcm1lpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::Ahb3lpenrMdmalpen(val as u8)
-            }
-            #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"]
-            pub fn set_d1dtcm1lpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
-            }
-            #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"]
-            pub const fn dtcm2lpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+            #[doc = "SRAM1 block enable"]
+            pub const fn sram1en(&self) -> super::vals::C1Ahb2enrDcmien {
                 let val = (self.0 >> 29usize) & 0x01;
-                super::vals::Ahb3lpenrMdmalpen(val as u8)
+                super::vals::C1Ahb2enrDcmien(val as u8)
             }
-            #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"]
-            pub fn set_dtcm2lpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+            #[doc = "SRAM1 block enable"]
+            pub fn set_sram1en(&mut self, val: super::vals::C1Ahb2enrDcmien) {
                 self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
             }
-            #[doc = "D1ITCM Block Clock Enable During CSleep mode"]
-            pub const fn itcmlpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+            #[doc = "SRAM2 block enable"]
+            pub const fn sram2en(&self) -> super::vals::C1Ahb2enrDcmien {
                 let val = (self.0 >> 30usize) & 0x01;
-                super::vals::Ahb3lpenrMdmalpen(val as u8)
+                super::vals::C1Ahb2enrDcmien(val as u8)
             }
-            #[doc = "D1ITCM Block Clock Enable During CSleep mode"]
-            pub fn set_itcmlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+            #[doc = "SRAM2 block enable"]
+            pub fn set_sram2en(&mut self, val: super::vals::C1Ahb2enrDcmien) {
                 self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize);
             }
-            #[doc = "AXISRAM Block Clock Enable During CSleep mode"]
-            pub const fn axisramlpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+            #[doc = "SRAM3 block enable"]
+            pub const fn sram3en(&self) -> super::vals::C1Ahb2enrDcmien {
                 let val = (self.0 >> 31usize) & 0x01;
-                super::vals::Ahb3lpenrMdmalpen(val as u8)
+                super::vals::C1Ahb2enrDcmien(val as u8)
             }
-            #[doc = "AXISRAM Block Clock Enable During CSleep mode"]
-            pub fn set_axisramlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+            #[doc = "SRAM3 block enable"]
+            pub fn set_sram3en(&mut self, val: super::vals::C1Ahb2enrDcmien) {
                 self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
             }
         }
-        impl Default for Ahb3lpenr {
-            fn default() -> Ahb3lpenr {
-                Ahb3lpenr(0)
+        impl Default for C1Ahb2enr {
+            fn default() -> C1Ahb2enr {
+                C1Ahb2enr(0)
             }
         }
-        #[doc = "RCC AHB4 Sleep Clock Register"]
+        #[doc = "clock control register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct C1Ahb4lpenr(pub u32);
-        impl C1Ahb4lpenr {
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioalpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
+        pub struct Cr(pub u32);
+        impl Cr {
+            #[doc = "Internal high-speed clock enable"]
+            pub const fn hsion(&self) -> super::vals::Hsion {
                 let val = (self.0 >> 0usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
+                super::vals::Hsion(val as u8)
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioalpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
+            #[doc = "Internal high-speed clock enable"]
+            pub fn set_hsion(&mut self, val: super::vals::Hsion) {
                 self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioblpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
+            #[doc = "High Speed Internal clock enable in Stop mode"]
+            pub const fn hsikeron(&self) -> super::vals::Hsion {
                 let val = (self.0 >> 1usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
+                super::vals::Hsion(val as u8)
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioblpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
+            #[doc = "High Speed Internal clock enable in Stop mode"]
+            pub fn set_hsikeron(&mut self, val: super::vals::Hsion) {
                 self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioclpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
+            #[doc = "HSI clock ready flag"]
+            pub const fn hsirdy(&self) -> bool {
                 let val = (self.0 >> 2usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
+                val != 0
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioclpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            #[doc = "HSI clock ready flag"]
+            pub fn set_hsirdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpiodlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
+            #[doc = "HSI clock divider"]
+            pub const fn hsidiv(&self) -> super::vals::Hsidiv {
+                let val = (self.0 >> 3usize) & 0x03;
+                super::vals::Hsidiv(val as u8)
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpiodlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            #[doc = "HSI clock divider"]
+            pub fn set_hsidiv(&mut self, val: super::vals::Hsidiv) {
+                self.0 = (self.0 & !(0x03 << 3usize)) | (((val.0 as u32) & 0x03) << 3usize);
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioelpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioelpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioflpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
+            #[doc = "HSI divider flag"]
+            pub const fn hsidivf(&self) -> bool {
                 let val = (self.0 >> 5usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
+                val != 0
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioflpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            #[doc = "HSI divider flag"]
+            pub fn set_hsidivf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioglpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 6usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioglpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
-            }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpiohlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
+            #[doc = "CSI clock enable"]
+            pub const fn csion(&self) -> super::vals::Hsion {
                 let val = (self.0 >> 7usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
+                super::vals::Hsion(val as u8)
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpiohlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
+            #[doc = "CSI clock enable"]
+            pub fn set_csion(&mut self, val: super::vals::Hsion) {
                 self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioilpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
+            #[doc = "CSI clock ready flag"]
+            pub const fn csirdy(&self) -> bool {
                 let val = (self.0 >> 8usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
+                val != 0
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioilpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            #[doc = "CSI clock ready flag"]
+            pub fn set_csirdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpiojlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
+            #[doc = "CSI clock enable in Stop mode"]
+            pub const fn csikeron(&self) -> super::vals::Hsion {
                 let val = (self.0 >> 9usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
+                super::vals::Hsion(val as u8)
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpiojlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
+            #[doc = "CSI clock enable in Stop mode"]
+            pub fn set_csikeron(&mut self, val: super::vals::Hsion) {
                 self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub const fn gpioklpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
+            #[doc = "RC48 clock enable"]
+            pub const fn hsi48on(&self) -> super::vals::Hsion {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Hsion(val as u8)
             }
-            #[doc = "GPIO peripheral clock enable during CSleep mode"]
-            pub fn set_gpioklpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            #[doc = "RC48 clock enable"]
+            pub fn set_hsi48on(&mut self, val: super::vals::Hsion) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
             }
-            #[doc = "CRC peripheral clock enable during CSleep mode"]
-            pub const fn crclpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
+            #[doc = "RC48 clock ready flag"]
+            pub const fn hsi48rdy(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "RC48 clock ready flag"]
+            pub fn set_hsi48rdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+            #[doc = "D1 domain clocks ready flag"]
+            pub const fn d1ckrdy(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "D1 domain clocks ready flag"]
+            pub fn set_d1ckrdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+            #[doc = "D2 domain clocks ready flag"]
+            pub const fn d2ckrdy(&self) -> bool {
+                let val = (self.0 >> 15usize) & 0x01;
+                val != 0
+            }
+            #[doc = "D2 domain clocks ready flag"]
+            pub fn set_d2ckrdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
+            }
+            #[doc = "HSE clock enable"]
+            pub const fn hseon(&self) -> super::vals::Hsion {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Hsion(val as u8)
+            }
+            #[doc = "HSE clock enable"]
+            pub fn set_hseon(&mut self, val: super::vals::Hsion) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "HSE clock ready flag"]
+            pub const fn hserdy(&self) -> bool {
+                let val = (self.0 >> 17usize) & 0x01;
+                val != 0
+            }
+            #[doc = "HSE clock ready flag"]
+            pub fn set_hserdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
+            }
+            #[doc = "HSE clock bypass"]
+            pub const fn hsebyp(&self) -> super::vals::Hsebyp {
+                let val = (self.0 >> 18usize) & 0x01;
+                super::vals::Hsebyp(val as u8)
+            }
+            #[doc = "HSE clock bypass"]
+            pub fn set_hsebyp(&mut self, val: super::vals::Hsebyp) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
+            }
+            #[doc = "HSE Clock Security System enable"]
+            pub const fn hsecsson(&self) -> super::vals::Hsion {
                 let val = (self.0 >> 19usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
+                super::vals::Hsion(val as u8)
             }
-            #[doc = "CRC peripheral clock enable during CSleep mode"]
-            pub fn set_crclpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
+            #[doc = "HSE Clock Security System enable"]
+            pub fn set_hsecsson(&mut self, val: super::vals::Hsion) {
                 self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
             }
-            #[doc = "BDMA Clock Enable During CSleep Mode"]
-            pub const fn bdmalpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 21usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
-            }
-            #[doc = "BDMA Clock Enable During CSleep Mode"]
-            pub fn set_bdmalpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
-            }
-            #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn adc3lpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
+            #[doc = "PLL1 enable"]
+            pub const fn pll1on(&self) -> super::vals::Hsion {
                 let val = (self.0 >> 24usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
+                super::vals::Hsion(val as u8)
             }
-            #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_adc3lpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
+            #[doc = "PLL1 enable"]
+            pub fn set_pll1on(&mut self, val: super::vals::Hsion) {
                 self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
             }
-            #[doc = "Backup RAM Clock Enable During CSleep Mode"]
-            pub const fn bkpramlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
+            #[doc = "PLL1 clock ready flag"]
+            pub const fn pll1rdy(&self) -> bool {
+                let val = (self.0 >> 25usize) & 0x01;
+                val != 0
             }
-            #[doc = "Backup RAM Clock Enable During CSleep Mode"]
-            pub fn set_bkpramlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
+            #[doc = "PLL1 clock ready flag"]
+            pub fn set_pll1rdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize);
+            }
+            #[doc = "PLL2 enable"]
+            pub const fn pll2on(&self) -> super::vals::Hsion {
+                let val = (self.0 >> 26usize) & 0x01;
+                super::vals::Hsion(val as u8)
+            }
+            #[doc = "PLL2 enable"]
+            pub fn set_pll2on(&mut self, val: super::vals::Hsion) {
+                self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize);
+            }
+            #[doc = "PLL2 clock ready flag"]
+            pub const fn pll2rdy(&self) -> bool {
+                let val = (self.0 >> 27usize) & 0x01;
+                val != 0
+            }
+            #[doc = "PLL2 clock ready flag"]
+            pub fn set_pll2rdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize);
+            }
+            #[doc = "PLL3 enable"]
+            pub const fn pll3on(&self) -> super::vals::Hsion {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::Hsion(val as u8)
+            }
+            #[doc = "PLL3 enable"]
+            pub fn set_pll3on(&mut self, val: super::vals::Hsion) {
                 self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
             }
-            #[doc = "SRAM4 Clock Enable During CSleep Mode"]
-            pub const fn sram4lpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
+            #[doc = "PLL3 clock ready flag"]
+            pub const fn pll3rdy(&self) -> bool {
                 let val = (self.0 >> 29usize) & 0x01;
-                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
+                val != 0
             }
-            #[doc = "SRAM4 Clock Enable During CSleep Mode"]
-            pub fn set_sram4lpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
-                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
+            #[doc = "PLL3 clock ready flag"]
+            pub fn set_pll3rdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize);
             }
         }
-        impl Default for C1Ahb4lpenr {
-            fn default() -> C1Ahb4lpenr {
-                C1Ahb4lpenr(0)
+        impl Default for Cr {
+            fn default() -> Cr {
+                Cr(0)
+            }
+        }
+        #[doc = "RCC APB3 Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Apb3enr(pub u32);
+        impl Apb3enr {
+            #[doc = "LTDC peripheral clock enable"]
+            pub const fn ltdcen(&self) -> super::vals::Apb3enrLtdcen {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Apb3enrLtdcen(val as u8)
+            }
+            #[doc = "LTDC peripheral clock enable"]
+            pub fn set_ltdcen(&mut self, val: super::vals::Apb3enrLtdcen) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "WWDG1 Clock Enable"]
+            pub const fn wwdg1en(&self) -> super::vals::Apb3enrLtdcen {
+                let val = (self.0 >> 6usize) & 0x01;
+                super::vals::Apb3enrLtdcen(val as u8)
+            }
+            #[doc = "WWDG1 Clock Enable"]
+            pub fn set_wwdg1en(&mut self, val: super::vals::Apb3enrLtdcen) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            }
+        }
+        impl Default for Apb3enr {
+            fn default() -> Apb3enr {
+                Apb3enr(0)
+            }
+        }
+        #[doc = "RCC Clock Recovery RC Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Crrcr(pub u32);
+        impl Crrcr {
+            #[doc = "Internal RC 48 MHz clock calibration"]
+            pub const fn hsi48cal(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x03ff;
+                val as u16
+            }
+            #[doc = "Internal RC 48 MHz clock calibration"]
+            pub fn set_hsi48cal(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x03ff << 0usize)) | (((val as u32) & 0x03ff) << 0usize);
+            }
+        }
+        impl Default for Crrcr {
+            fn default() -> Crrcr {
+                Crrcr(0)
             }
         }
         #[doc = "RCC Global Control Register"]
@@ -5227,93 +3501,6 @@ pub mod rcc_h7 {
                 Gcr(0)
             }
         }
-        #[doc = "RCC Clock Source Interrupt Enable Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cier(pub u32);
-        impl Cier {
-            #[doc = "LSI ready Interrupt Enable"]
-            pub const fn lsirdyie(&self) -> super::vals::Lsirdyie {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Lsirdyie(val as u8)
-            }
-            #[doc = "LSI ready Interrupt Enable"]
-            pub fn set_lsirdyie(&mut self, val: super::vals::Lsirdyie) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "LSE ready Interrupt Enable"]
-            pub const fn lserdyie(&self) -> super::vals::Lsirdyie {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Lsirdyie(val as u8)
-            }
-            #[doc = "LSE ready Interrupt Enable"]
-            pub fn set_lserdyie(&mut self, val: super::vals::Lsirdyie) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "HSI ready Interrupt Enable"]
-            pub const fn hsirdyie(&self) -> super::vals::Lsirdyie {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Lsirdyie(val as u8)
-            }
-            #[doc = "HSI ready Interrupt Enable"]
-            pub fn set_hsirdyie(&mut self, val: super::vals::Lsirdyie) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "HSE ready Interrupt Enable"]
-            pub const fn hserdyie(&self) -> super::vals::Lsirdyie {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Lsirdyie(val as u8)
-            }
-            #[doc = "HSE ready Interrupt Enable"]
-            pub fn set_hserdyie(&mut self, val: super::vals::Lsirdyie) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "CSI ready Interrupt Enable"]
-            pub const fn csirdyie(&self) -> super::vals::Lsirdyie {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Lsirdyie(val as u8)
-            }
-            #[doc = "CSI ready Interrupt Enable"]
-            pub fn set_csirdyie(&mut self, val: super::vals::Lsirdyie) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "RC48 ready Interrupt Enable"]
-            pub const fn hsi48rdyie(&self) -> super::vals::Lsirdyie {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Lsirdyie(val as u8)
-            }
-            #[doc = "RC48 ready Interrupt Enable"]
-            pub fn set_hsi48rdyie(&mut self, val: super::vals::Lsirdyie) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "PLL1 ready Interrupt Enable"]
-            pub fn pllrdyie(&self, n: usize) -> super::vals::Lsirdyie {
-                assert!(n < 3usize);
-                let offs = 6usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Lsirdyie(val as u8)
-            }
-            #[doc = "PLL1 ready Interrupt Enable"]
-            pub fn set_pllrdyie(&mut self, n: usize, val: super::vals::Lsirdyie) {
-                assert!(n < 3usize);
-                let offs = 6usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-            #[doc = "LSE clock security system Interrupt Enable"]
-            pub const fn lsecssie(&self) -> super::vals::Lsirdyie {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Lsirdyie(val as u8)
-            }
-            #[doc = "LSE clock security system Interrupt Enable"]
-            pub fn set_lsecssie(&mut self, val: super::vals::Lsirdyie) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-        }
-        impl Default for Cier {
-            fn default() -> Cier {
-                Cier(0)
-            }
-        }
         #[doc = "RCC Domain 3 Clock Configuration Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -5334,1123 +3521,6 @@ pub mod rcc_h7 {
                 D3cfgr(0)
             }
         }
-        #[doc = "RCC Internal Clock Source Calibration Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Icscr(pub u32);
-        impl Icscr {
-            #[doc = "HSI clock calibration"]
-            pub const fn hsical(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x0fff;
-                val as u16
-            }
-            #[doc = "HSI clock calibration"]
-            pub fn set_hsical(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
-            }
-            #[doc = "HSI clock trimming"]
-            pub const fn hsitrim(&self) -> u8 {
-                let val = (self.0 >> 12usize) & 0x3f;
-                val as u8
-            }
-            #[doc = "HSI clock trimming"]
-            pub fn set_hsitrim(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x3f << 12usize)) | (((val as u32) & 0x3f) << 12usize);
-            }
-            #[doc = "CSI clock calibration"]
-            pub const fn csical(&self) -> u8 {
-                let val = (self.0 >> 18usize) & 0xff;
-                val as u8
-            }
-            #[doc = "CSI clock calibration"]
-            pub fn set_csical(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 18usize)) | (((val as u32) & 0xff) << 18usize);
-            }
-            #[doc = "CSI clock trimming"]
-            pub const fn csitrim(&self) -> u8 {
-                let val = (self.0 >> 26usize) & 0x1f;
-                val as u8
-            }
-            #[doc = "CSI clock trimming"]
-            pub fn set_csitrim(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x1f << 26usize)) | (((val as u32) & 0x1f) << 26usize);
-            }
-        }
-        impl Default for Icscr {
-            fn default() -> Icscr {
-                Icscr(0)
-            }
-        }
-        #[doc = "RCC AHB1 Sleep Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ahb1lpenr(pub u32);
-        impl Ahb1lpenr {
-            #[doc = "DMA1 Clock Enable During CSleep Mode"]
-            pub const fn dma1lpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "DMA1 Clock Enable During CSleep Mode"]
-            pub fn set_dma1lpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "DMA2 Clock Enable During CSleep Mode"]
-            pub const fn dma2lpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "DMA2 Clock Enable During CSleep Mode"]
-            pub fn set_dma2lpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn adc12lpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_adc12lpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"]
-            pub const fn eth1maclpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"]
-            pub fn set_eth1maclpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
-            #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"]
-            pub const fn eth1txlpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"]
-            pub fn set_eth1txlpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "Ethernet Reception Clock Enable During CSleep Mode"]
-            pub const fn eth1rxlpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 17usize) & 0x01;
-                super::vals::Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "Ethernet Reception Clock Enable During CSleep Mode"]
-            pub fn set_eth1rxlpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
-            }
-            #[doc = "USB1OTG peripheral clock enable during CSleep mode"]
-            pub const fn usb1otglpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 25usize) & 0x01;
-                super::vals::Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "USB1OTG peripheral clock enable during CSleep mode"]
-            pub fn set_usb1otglpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
-            }
-            #[doc = "USB_PHY1 clock enable during CSleep mode"]
-            pub const fn usb1otghsulpilpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 26usize) & 0x01;
-                super::vals::Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "USB_PHY1 clock enable during CSleep mode"]
-            pub fn set_usb1otghsulpilpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize);
-            }
-            #[doc = "USB2OTG peripheral clock enable during CSleep mode"]
-            pub const fn usb2otglpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 27usize) & 0x01;
-                super::vals::Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "USB2OTG peripheral clock enable during CSleep mode"]
-            pub fn set_usb2otglpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
-            }
-            #[doc = "USB_PHY2 clocks enable during CSleep mode"]
-            pub const fn usb2otghsulpilpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "USB_PHY2 clocks enable during CSleep mode"]
-            pub fn set_usb2otghsulpilpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
-            }
-        }
-        impl Default for Ahb1lpenr {
-            fn default() -> Ahb1lpenr {
-                Ahb1lpenr(0)
-            }
-        }
-        #[doc = "RCC APB3 Peripheral Reset Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb3rstr(pub u32);
-        impl Apb3rstr {
-            #[doc = "LTDC block reset"]
-            pub const fn ltdcrst(&self) -> super::vals::Ltdcrst {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Ltdcrst(val as u8)
-            }
-            #[doc = "LTDC block reset"]
-            pub fn set_ltdcrst(&mut self, val: super::vals::Ltdcrst) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-        }
-        impl Default for Apb3rstr {
-            fn default() -> Apb3rstr {
-                Apb3rstr(0)
-            }
-        }
-        #[doc = "RCC AHB1 Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct C1Ahb1enr(pub u32);
-        impl C1Ahb1enr {
-            #[doc = "DMA1 Clock Enable"]
-            pub const fn dma1en(&self) -> super::vals::C1Ahb1enrDma1en {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::C1Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "DMA1 Clock Enable"]
-            pub fn set_dma1en(&mut self, val: super::vals::C1Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "DMA2 Clock Enable"]
-            pub const fn dma2en(&self) -> super::vals::C1Ahb1enrDma1en {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::C1Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "DMA2 Clock Enable"]
-            pub fn set_dma2en(&mut self, val: super::vals::C1Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "ADC1/2 Peripheral Clocks Enable"]
-            pub const fn adc12en(&self) -> super::vals::C1Ahb1enrDma1en {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::C1Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "ADC1/2 Peripheral Clocks Enable"]
-            pub fn set_adc12en(&mut self, val: super::vals::C1Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Ethernet MAC bus interface Clock Enable"]
-            pub const fn eth1macen(&self) -> super::vals::C1Ahb1enrDma1en {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::C1Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "Ethernet MAC bus interface Clock Enable"]
-            pub fn set_eth1macen(&mut self, val: super::vals::C1Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
-            #[doc = "Ethernet Transmission Clock Enable"]
-            pub const fn eth1txen(&self) -> super::vals::C1Ahb1enrDma1en {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::C1Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "Ethernet Transmission Clock Enable"]
-            pub fn set_eth1txen(&mut self, val: super::vals::C1Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "Ethernet Reception Clock Enable"]
-            pub const fn eth1rxen(&self) -> super::vals::C1Ahb1enrDma1en {
-                let val = (self.0 >> 17usize) & 0x01;
-                super::vals::C1Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "Ethernet Reception Clock Enable"]
-            pub fn set_eth1rxen(&mut self, val: super::vals::C1Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
-            }
-            #[doc = "USB1OTG Peripheral Clocks Enable"]
-            pub const fn usb1otgen(&self) -> super::vals::C1Ahb1enrDma1en {
-                let val = (self.0 >> 25usize) & 0x01;
-                super::vals::C1Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "USB1OTG Peripheral Clocks Enable"]
-            pub fn set_usb1otgen(&mut self, val: super::vals::C1Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
-            }
-            #[doc = "USB_PHY1 Clocks Enable"]
-            pub const fn usb1ulpien(&self) -> super::vals::C1Ahb1enrDma1en {
-                let val = (self.0 >> 26usize) & 0x01;
-                super::vals::C1Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "USB_PHY1 Clocks Enable"]
-            pub fn set_usb1ulpien(&mut self, val: super::vals::C1Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize);
-            }
-            #[doc = "USB2OTG Peripheral Clocks Enable"]
-            pub const fn usb2otgen(&self) -> super::vals::C1Ahb1enrDma1en {
-                let val = (self.0 >> 27usize) & 0x01;
-                super::vals::C1Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "USB2OTG Peripheral Clocks Enable"]
-            pub fn set_usb2otgen(&mut self, val: super::vals::C1Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
-            }
-            #[doc = "USB_PHY2 Clocks Enable"]
-            pub const fn usb2ulpien(&self) -> super::vals::C1Ahb1enrDma1en {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::C1Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "USB_PHY2 Clocks Enable"]
-            pub fn set_usb2ulpien(&mut self, val: super::vals::C1Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
-            }
-        }
-        impl Default for C1Ahb1enr {
-            fn default() -> C1Ahb1enr {
-                C1Ahb1enr(0)
-            }
-        }
-        #[doc = "RCC APB1 Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct C1Apb1henr(pub u32);
-        impl C1Apb1henr {
-            #[doc = "Clock Recovery System peripheral clock enable"]
-            pub const fn crsen(&self) -> super::vals::C1Apb1henrCrsen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::C1Apb1henrCrsen(val as u8)
-            }
-            #[doc = "Clock Recovery System peripheral clock enable"]
-            pub fn set_crsen(&mut self, val: super::vals::C1Apb1henrCrsen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "SWPMI Peripheral Clocks Enable"]
-            pub const fn swpen(&self) -> super::vals::C1Apb1henrCrsen {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::C1Apb1henrCrsen(val as u8)
-            }
-            #[doc = "SWPMI Peripheral Clocks Enable"]
-            pub fn set_swpen(&mut self, val: super::vals::C1Apb1henrCrsen) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "OPAMP peripheral clock enable"]
-            pub const fn opampen(&self) -> super::vals::C1Apb1henrCrsen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::C1Apb1henrCrsen(val as u8)
-            }
-            #[doc = "OPAMP peripheral clock enable"]
-            pub fn set_opampen(&mut self, val: super::vals::C1Apb1henrCrsen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "MDIOS peripheral clock enable"]
-            pub const fn mdiosen(&self) -> super::vals::C1Apb1henrCrsen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::C1Apb1henrCrsen(val as u8)
-            }
-            #[doc = "MDIOS peripheral clock enable"]
-            pub fn set_mdiosen(&mut self, val: super::vals::C1Apb1henrCrsen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "FDCAN Peripheral Clocks Enable"]
-            pub const fn fdcanen(&self) -> super::vals::C1Apb1henrCrsen {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::C1Apb1henrCrsen(val as u8)
-            }
-            #[doc = "FDCAN Peripheral Clocks Enable"]
-            pub fn set_fdcanen(&mut self, val: super::vals::C1Apb1henrCrsen) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
-            }
-        }
-        impl Default for C1Apb1henr {
-            fn default() -> C1Apb1henr {
-                C1Apb1henr(0)
-            }
-        }
-        #[doc = "RCC AHB1 Sleep Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct C1Ahb1lpenr(pub u32);
-        impl C1Ahb1lpenr {
-            #[doc = "DMA1 Clock Enable During CSleep Mode"]
-            pub const fn dma1lpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "DMA1 Clock Enable During CSleep Mode"]
-            pub fn set_dma1lpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "DMA2 Clock Enable During CSleep Mode"]
-            pub const fn dma2lpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "DMA2 Clock Enable During CSleep Mode"]
-            pub fn set_dma2lpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn adc12lpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_adc12lpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"]
-            pub const fn eth1maclpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"]
-            pub fn set_eth1maclpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
-            #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"]
-            pub const fn eth1txlpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"]
-            pub fn set_eth1txlpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "Ethernet Reception Clock Enable During CSleep Mode"]
-            pub const fn eth1rxlpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 17usize) & 0x01;
-                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "Ethernet Reception Clock Enable During CSleep Mode"]
-            pub fn set_eth1rxlpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
-            }
-            #[doc = "USB1OTG peripheral clock enable during CSleep mode"]
-            pub const fn usb1otglpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 25usize) & 0x01;
-                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "USB1OTG peripheral clock enable during CSleep mode"]
-            pub fn set_usb1otglpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
-            }
-            #[doc = "USB_PHY1 clock enable during CSleep mode"]
-            pub const fn usb1ulpilpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 26usize) & 0x01;
-                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "USB_PHY1 clock enable during CSleep mode"]
-            pub fn set_usb1ulpilpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize);
-            }
-            #[doc = "USB2OTG peripheral clock enable during CSleep mode"]
-            pub const fn usb2otglpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 27usize) & 0x01;
-                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "USB2OTG peripheral clock enable during CSleep mode"]
-            pub fn set_usb2otglpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
-            }
-            #[doc = "USB_PHY2 clocks enable during CSleep mode"]
-            pub const fn usb2ulpilpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
-            }
-            #[doc = "USB_PHY2 clocks enable during CSleep mode"]
-            pub fn set_usb2ulpilpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
-            }
-        }
-        impl Default for C1Ahb1lpenr {
-            fn default() -> C1Ahb1lpenr {
-                C1Ahb1lpenr(0)
-            }
-        }
-        #[doc = "RCC AHB4 Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct C1Ahb4enr(pub u32);
-        impl C1Ahb4enr {
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpioaen(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpioaen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpioben(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpioben(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpiocen(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpiocen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpioden(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpioden(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpioeen(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpioeen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpiofen(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpiofen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpiogen(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 6usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpiogen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpiohen(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpiohen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpioien(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpioien(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpiojen(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpiojen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpioken(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpioken(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "CRC peripheral clock enable"]
-            pub const fn crcen(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 19usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "CRC peripheral clock enable"]
-            pub fn set_crcen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
-            }
-            #[doc = "BDMA and DMAMUX2 Clock Enable"]
-            pub const fn bdmaen(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 21usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "BDMA and DMAMUX2 Clock Enable"]
-            pub fn set_bdmaen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
-            }
-            #[doc = "ADC3 Peripheral Clocks Enable"]
-            pub const fn adc3en(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 24usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "ADC3 Peripheral Clocks Enable"]
-            pub fn set_adc3en(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
-            }
-            #[doc = "HSEM peripheral clock enable"]
-            pub const fn hsemen(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 25usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "HSEM peripheral clock enable"]
-            pub fn set_hsemen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
-            }
-            #[doc = "Backup RAM Clock Enable"]
-            pub const fn bkpramen(&self) -> super::vals::C1Ahb4enrGpioaen {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::C1Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "Backup RAM Clock Enable"]
-            pub fn set_bkpramen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
-            }
-        }
-        impl Default for C1Ahb4enr {
-            fn default() -> C1Ahb4enr {
-                C1Ahb4enr(0)
-            }
-        }
-        #[doc = "RCC Backup Domain Control Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Bdcr(pub u32);
-        impl Bdcr {
-            #[doc = "LSE oscillator enabled"]
-            pub const fn lseon(&self) -> super::vals::Lseon {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Lseon(val as u8)
-            }
-            #[doc = "LSE oscillator enabled"]
-            pub fn set_lseon(&mut self, val: super::vals::Lseon) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "LSE oscillator ready"]
-            pub const fn lserdy(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LSE oscillator ready"]
-            pub fn set_lserdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "LSE oscillator bypass"]
-            pub const fn lsebyp(&self) -> super::vals::Lsebyp {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Lsebyp(val as u8)
-            }
-            #[doc = "LSE oscillator bypass"]
-            pub fn set_lsebyp(&mut self, val: super::vals::Lsebyp) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "LSE oscillator driving capability"]
-            pub const fn lsedrv(&self) -> super::vals::Lsedrv {
-                let val = (self.0 >> 3usize) & 0x03;
-                super::vals::Lsedrv(val as u8)
-            }
-            #[doc = "LSE oscillator driving capability"]
-            pub fn set_lsedrv(&mut self, val: super::vals::Lsedrv) {
-                self.0 = (self.0 & !(0x03 << 3usize)) | (((val.0 as u32) & 0x03) << 3usize);
-            }
-            #[doc = "LSE clock security system enable"]
-            pub const fn lsecsson(&self) -> super::vals::Lsecsson {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Lsecsson(val as u8)
-            }
-            #[doc = "LSE clock security system enable"]
-            pub fn set_lsecsson(&mut self, val: super::vals::Lsecsson) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "LSE clock security system failure detection"]
-            pub const fn lsecssd(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LSE clock security system failure detection"]
-            pub fn set_lsecssd(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "RTC clock source selection"]
-            pub const fn rtcsel(&self) -> super::vals::Rtcsel {
-                let val = (self.0 >> 8usize) & 0x03;
-                super::vals::Rtcsel(val as u8)
-            }
-            #[doc = "RTC clock source selection"]
-            pub fn set_rtcsel(&mut self, val: super::vals::Rtcsel) {
-                self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize);
-            }
-            #[doc = "RTC clock enable"]
-            pub const fn rtcen(&self) -> super::vals::Rtcen {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Rtcen(val as u8)
-            }
-            #[doc = "RTC clock enable"]
-            pub fn set_rtcen(&mut self, val: super::vals::Rtcen) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
-            #[doc = "VSwitch domain software reset"]
-            pub const fn bdrst(&self) -> super::vals::Bdrst {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Bdrst(val as u8)
-            }
-            #[doc = "VSwitch domain software reset"]
-            pub fn set_bdrst(&mut self, val: super::vals::Bdrst) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-        }
-        impl Default for Bdcr {
-            fn default() -> Bdcr {
-                Bdcr(0)
-            }
-        }
-        #[doc = "RCC AHB1 Peripheral Reset Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ahb1rstr(pub u32);
-        impl Ahb1rstr {
-            #[doc = "DMA1 block reset"]
-            pub const fn dma1rst(&self) -> super::vals::Dma1rst {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Dma1rst(val as u8)
-            }
-            #[doc = "DMA1 block reset"]
-            pub fn set_dma1rst(&mut self, val: super::vals::Dma1rst) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "DMA2 block reset"]
-            pub const fn dma2rst(&self) -> super::vals::Dma1rst {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Dma1rst(val as u8)
-            }
-            #[doc = "DMA2 block reset"]
-            pub fn set_dma2rst(&mut self, val: super::vals::Dma1rst) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "ADC1&2 block reset"]
-            pub const fn adc12rst(&self) -> super::vals::Dma1rst {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Dma1rst(val as u8)
-            }
-            #[doc = "ADC1&2 block reset"]
-            pub fn set_adc12rst(&mut self, val: super::vals::Dma1rst) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "ETH1MAC block reset"]
-            pub const fn eth1macrst(&self) -> super::vals::Dma1rst {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Dma1rst(val as u8)
-            }
-            #[doc = "ETH1MAC block reset"]
-            pub fn set_eth1macrst(&mut self, val: super::vals::Dma1rst) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
-            #[doc = "USB1OTG block reset"]
-            pub const fn usb1otgrst(&self) -> super::vals::Dma1rst {
-                let val = (self.0 >> 25usize) & 0x01;
-                super::vals::Dma1rst(val as u8)
-            }
-            #[doc = "USB1OTG block reset"]
-            pub fn set_usb1otgrst(&mut self, val: super::vals::Dma1rst) {
-                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
-            }
-            #[doc = "USB2OTG block reset"]
-            pub const fn usb2otgrst(&self) -> super::vals::Dma1rst {
-                let val = (self.0 >> 27usize) & 0x01;
-                super::vals::Dma1rst(val as u8)
-            }
-            #[doc = "USB2OTG block reset"]
-            pub fn set_usb2otgrst(&mut self, val: super::vals::Dma1rst) {
-                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
-            }
-        }
-        impl Default for Ahb1rstr {
-            fn default() -> Ahb1rstr {
-                Ahb1rstr(0)
-            }
-        }
-        #[doc = "RCC AHB2 Peripheral Reset Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ahb2rstr(pub u32);
-        impl Ahb2rstr {
-            #[doc = "CAMITF block reset"]
-            pub const fn camitfrst(&self) -> super::vals::Camitfrst {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Camitfrst(val as u8)
-            }
-            #[doc = "CAMITF block reset"]
-            pub fn set_camitfrst(&mut self, val: super::vals::Camitfrst) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Cryptography block reset"]
-            pub const fn cryptrst(&self) -> super::vals::Camitfrst {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Camitfrst(val as u8)
-            }
-            #[doc = "Cryptography block reset"]
-            pub fn set_cryptrst(&mut self, val: super::vals::Camitfrst) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Hash block reset"]
-            pub const fn hashrst(&self) -> super::vals::Camitfrst {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Camitfrst(val as u8)
-            }
-            #[doc = "Hash block reset"]
-            pub fn set_hashrst(&mut self, val: super::vals::Camitfrst) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Random Number Generator block reset"]
-            pub const fn rngrst(&self) -> super::vals::Camitfrst {
-                let val = (self.0 >> 6usize) & 0x01;
-                super::vals::Camitfrst(val as u8)
-            }
-            #[doc = "Random Number Generator block reset"]
-            pub fn set_rngrst(&mut self, val: super::vals::Camitfrst) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
-            }
-            #[doc = "SDMMC2 and SDMMC2 Delay block reset"]
-            pub const fn sdmmc2rst(&self) -> super::vals::Camitfrst {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Camitfrst(val as u8)
-            }
-            #[doc = "SDMMC2 and SDMMC2 Delay block reset"]
-            pub fn set_sdmmc2rst(&mut self, val: super::vals::Camitfrst) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-        }
-        impl Default for Ahb2rstr {
-            fn default() -> Ahb2rstr {
-                Ahb2rstr(0)
-            }
-        }
-        #[doc = "RCC APB1 Low Sleep Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb1llpenr(pub u32);
-        impl Apb1llpenr {
-            #[doc = "TIM2 peripheral clock enable during CSleep mode"]
-            pub const fn tim2lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "TIM2 peripheral clock enable during CSleep mode"]
-            pub fn set_tim2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "TIM3 peripheral clock enable during CSleep mode"]
-            pub const fn tim3lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "TIM3 peripheral clock enable during CSleep mode"]
-            pub fn set_tim3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "TIM4 peripheral clock enable during CSleep mode"]
-            pub const fn tim4lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "TIM4 peripheral clock enable during CSleep mode"]
-            pub fn set_tim4lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "TIM5 peripheral clock enable during CSleep mode"]
-            pub const fn tim5lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "TIM5 peripheral clock enable during CSleep mode"]
-            pub fn set_tim5lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "TIM6 peripheral clock enable during CSleep mode"]
-            pub const fn tim6lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "TIM6 peripheral clock enable during CSleep mode"]
-            pub fn set_tim6lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "TIM7 peripheral clock enable during CSleep mode"]
-            pub const fn tim7lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "TIM7 peripheral clock enable during CSleep mode"]
-            pub fn set_tim7lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "TIM12 peripheral clock enable during CSleep mode"]
-            pub const fn tim12lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 6usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "TIM12 peripheral clock enable during CSleep mode"]
-            pub fn set_tim12lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
-            }
-            #[doc = "TIM13 peripheral clock enable during CSleep mode"]
-            pub const fn tim13lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "TIM13 peripheral clock enable during CSleep mode"]
-            pub fn set_tim13lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "TIM14 peripheral clock enable during CSleep mode"]
-            pub const fn tim14lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "TIM14 peripheral clock enable during CSleep mode"]
-            pub fn set_tim14lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
-            }
-            #[doc = "LPTIM1 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn lptim1lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "LPTIM1 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_lptim1lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "SPI2 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn spi2lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "SPI2 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_spi2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "SPI3 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn spi3lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "SPI3 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_spi3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
-            #[doc = "SPDIFRX Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn spdifrxlpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "SPDIFRX Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_spdifrxlpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "USART2 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn usart2lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 17usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "USART2 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_usart2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
-            }
-            #[doc = "USART3 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn usart3lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 18usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "USART3 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_usart3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
-            }
-            #[doc = "UART4 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn uart4lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 19usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "UART4 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_uart4lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
-            }
-            #[doc = "UART5 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn uart5lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 20usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "UART5 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_uart5lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize);
-            }
-            #[doc = "I2C1 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn i2c1lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 21usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "I2C1 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_i2c1lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
-            }
-            #[doc = "I2C2 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn i2c2lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 22usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "I2C2 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_i2c2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
-            }
-            #[doc = "I2C3 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn i2c3lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 23usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "I2C3 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_i2c3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize);
-            }
-            #[doc = "HDMI-CEC Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn ceclpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 27usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "HDMI-CEC Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_ceclpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
-            }
-            #[doc = "DAC1/2 peripheral clock enable during CSleep mode"]
-            pub const fn dac12lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 29usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "DAC1/2 peripheral clock enable during CSleep mode"]
-            pub fn set_dac12lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
-            }
-            #[doc = "UART7 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn uart7lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 30usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "UART7 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_uart7lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize);
-            }
-            #[doc = "UART8 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn uart8lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
-                let val = (self.0 >> 31usize) & 0x01;
-                super::vals::Apb1llpenrTim2lpen(val as u8)
-            }
-            #[doc = "UART8 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_uart8lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
-                self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
-            }
-        }
-        impl Default for Apb1llpenr {
-            fn default() -> Apb1llpenr {
-                Apb1llpenr(0)
-            }
-        }
-        #[doc = "RCC Clock Source Interrupt Clear Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cicr(pub u32);
-        impl Cicr {
-            #[doc = "LSI ready Interrupt Clear"]
-            pub const fn lsirdyc(&self) -> super::vals::Lsirdyc {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Lsirdyc(val as u8)
-            }
-            #[doc = "LSI ready Interrupt Clear"]
-            pub fn set_lsirdyc(&mut self, val: super::vals::Lsirdyc) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "LSE ready Interrupt Clear"]
-            pub const fn lserdyc(&self) -> super::vals::Lsirdyc {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Lsirdyc(val as u8)
-            }
-            #[doc = "LSE ready Interrupt Clear"]
-            pub fn set_lserdyc(&mut self, val: super::vals::Lsirdyc) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "HSI ready Interrupt Clear"]
-            pub const fn hsirdyc(&self) -> super::vals::Lsirdyc {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Lsirdyc(val as u8)
-            }
-            #[doc = "HSI ready Interrupt Clear"]
-            pub fn set_hsirdyc(&mut self, val: super::vals::Lsirdyc) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "HSE ready Interrupt Clear"]
-            pub const fn hserdyc(&self) -> super::vals::Lsirdyc {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Lsirdyc(val as u8)
-            }
-            #[doc = "HSE ready Interrupt Clear"]
-            pub fn set_hserdyc(&mut self, val: super::vals::Lsirdyc) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "CSI ready Interrupt Clear"]
-            pub const fn hse_ready_interrupt_clear(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CSI ready Interrupt Clear"]
-            pub fn set_hse_ready_interrupt_clear(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "RC48 ready Interrupt Clear"]
-            pub const fn hsi48rdyc(&self) -> super::vals::Lsirdyc {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Lsirdyc(val as u8)
-            }
-            #[doc = "RC48 ready Interrupt Clear"]
-            pub fn set_hsi48rdyc(&mut self, val: super::vals::Lsirdyc) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "PLL1 ready Interrupt Clear"]
-            pub fn pllrdyc(&self, n: usize) -> super::vals::Lsirdyc {
-                assert!(n < 3usize);
-                let offs = 6usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Lsirdyc(val as u8)
-            }
-            #[doc = "PLL1 ready Interrupt Clear"]
-            pub fn set_pllrdyc(&mut self, n: usize, val: super::vals::Lsirdyc) {
-                assert!(n < 3usize);
-                let offs = 6usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-            #[doc = "LSE clock security system Interrupt Clear"]
-            pub const fn lsecssc(&self) -> super::vals::Lsirdyc {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Lsirdyc(val as u8)
-            }
-            #[doc = "LSE clock security system Interrupt Clear"]
-            pub fn set_lsecssc(&mut self, val: super::vals::Lsirdyc) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "HSE clock security system Interrupt Clear"]
-            pub const fn hsecssc(&self) -> super::vals::Lsirdyc {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Lsirdyc(val as u8)
-            }
-            #[doc = "HSE clock security system Interrupt Clear"]
-            pub fn set_hsecssc(&mut self, val: super::vals::Lsirdyc) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-        }
-        impl Default for Cicr {
-            fn default() -> Cicr {
-                Cicr(0)
-            }
-        }
         #[doc = "RCC APB1 Clock Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -6678,600 +3748,96 @@ pub mod rcc_h7 {
                 C1Apb1lenr(0)
             }
         }
-        #[doc = "RCC Reset Status Register"]
+        #[doc = "RCC Backup Domain Control Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct C1Rsr(pub u32);
-        impl C1Rsr {
-            #[doc = "Remove reset flag"]
-            pub const fn rmvf(&self) -> super::vals::C1RsrRmvf {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::C1RsrRmvf(val as u8)
-            }
-            #[doc = "Remove reset flag"]
-            pub fn set_rmvf(&mut self, val: super::vals::C1RsrRmvf) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "CPU reset flag"]
-            pub const fn cpurstf(&self) -> bool {
-                let val = (self.0 >> 17usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CPU reset flag"]
-            pub fn set_cpurstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
-            }
-            #[doc = "D1 domain power switch reset flag"]
-            pub const fn d1rstf(&self) -> bool {
-                let val = (self.0 >> 19usize) & 0x01;
-                val != 0
-            }
-            #[doc = "D1 domain power switch reset flag"]
-            pub fn set_d1rstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize);
-            }
-            #[doc = "D2 domain power switch reset flag"]
-            pub const fn d2rstf(&self) -> bool {
-                let val = (self.0 >> 20usize) & 0x01;
-                val != 0
-            }
-            #[doc = "D2 domain power switch reset flag"]
-            pub fn set_d2rstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
-            }
-            #[doc = "BOR reset flag"]
-            pub const fn borrstf(&self) -> bool {
-                let val = (self.0 >> 21usize) & 0x01;
-                val != 0
-            }
-            #[doc = "BOR reset flag"]
-            pub fn set_borrstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
-            }
-            #[doc = "Pin reset flag (NRST)"]
-            pub const fn pinrstf(&self) -> bool {
-                let val = (self.0 >> 22usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Pin reset flag (NRST)"]
-            pub fn set_pinrstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
-            }
-            #[doc = "POR/PDR reset flag"]
-            pub const fn porrstf(&self) -> bool {
-                let val = (self.0 >> 23usize) & 0x01;
-                val != 0
-            }
-            #[doc = "POR/PDR reset flag"]
-            pub fn set_porrstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
-            }
-            #[doc = "System reset from CPU reset flag"]
-            pub const fn sftrstf(&self) -> bool {
-                let val = (self.0 >> 24usize) & 0x01;
-                val != 0
-            }
-            #[doc = "System reset from CPU reset flag"]
-            pub fn set_sftrstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize);
-            }
-            #[doc = "Independent Watchdog reset flag"]
-            pub const fn iwdg1rstf(&self) -> bool {
-                let val = (self.0 >> 26usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Independent Watchdog reset flag"]
-            pub fn set_iwdg1rstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
-            }
-            #[doc = "Window Watchdog reset flag"]
-            pub const fn wwdg1rstf(&self) -> bool {
-                let val = (self.0 >> 28usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Window Watchdog reset flag"]
-            pub fn set_wwdg1rstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize);
-            }
-            #[doc = "Reset due to illegal D1 DStandby or CPU CStop flag"]
-            pub const fn lpwrrstf(&self) -> bool {
-                let val = (self.0 >> 30usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Reset due to illegal D1 DStandby or CPU CStop flag"]
-            pub fn set_lpwrrstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize);
-            }
-        }
-        impl Default for C1Rsr {
-            fn default() -> C1Rsr {
-                C1Rsr(0)
-            }
-        }
-        #[doc = "RCC PLLs Configuration Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Pllcfgr(pub u32);
-        impl Pllcfgr {
-            #[doc = "PLL1 fractional latch enable"]
-            pub fn pllfracen(&self, n: usize) -> super::vals::Pll1fracen {
-                assert!(n < 3usize);
-                let offs = 0usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Pll1fracen(val as u8)
-            }
-            #[doc = "PLL1 fractional latch enable"]
-            pub fn set_pllfracen(&mut self, n: usize, val: super::vals::Pll1fracen) {
-                assert!(n < 3usize);
-                let offs = 0usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-            #[doc = "PLL1 VCO selection"]
-            pub fn pllvcosel(&self, n: usize) -> super::vals::Pll1vcosel {
-                assert!(n < 3usize);
-                let offs = 1usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Pll1vcosel(val as u8)
-            }
-            #[doc = "PLL1 VCO selection"]
-            pub fn set_pllvcosel(&mut self, n: usize, val: super::vals::Pll1vcosel) {
-                assert!(n < 3usize);
-                let offs = 1usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-            #[doc = "PLL1 input frequency range"]
-            pub fn pllrge(&self, n: usize) -> super::vals::Pll1rge {
-                assert!(n < 3usize);
-                let offs = 2usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x03;
-                super::vals::Pll1rge(val as u8)
-            }
-            #[doc = "PLL1 input frequency range"]
-            pub fn set_pllrge(&mut self, n: usize, val: super::vals::Pll1rge) {
-                assert!(n < 3usize);
-                let offs = 2usize + n * 4usize;
-                self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs);
-            }
-            #[doc = "PLL1 DIVP divider output enable"]
-            pub fn divpen(&self, n: usize) -> super::vals::Divp1en {
-                assert!(n < 3usize);
-                let offs = 16usize + n * 3usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Divp1en(val as u8)
-            }
-            #[doc = "PLL1 DIVP divider output enable"]
-            pub fn set_divpen(&mut self, n: usize, val: super::vals::Divp1en) {
-                assert!(n < 3usize);
-                let offs = 16usize + n * 3usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-            #[doc = "PLL1 DIVQ divider output enable"]
-            pub fn divqen(&self, n: usize) -> super::vals::Divp1en {
-                assert!(n < 3usize);
-                let offs = 17usize + n * 3usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Divp1en(val as u8)
-            }
-            #[doc = "PLL1 DIVQ divider output enable"]
-            pub fn set_divqen(&mut self, n: usize, val: super::vals::Divp1en) {
-                assert!(n < 3usize);
-                let offs = 17usize + n * 3usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-            #[doc = "PLL1 DIVR divider output enable"]
-            pub fn divren(&self, n: usize) -> super::vals::Divp1en {
-                assert!(n < 3usize);
-                let offs = 18usize + n * 3usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Divp1en(val as u8)
-            }
-            #[doc = "PLL1 DIVR divider output enable"]
-            pub fn set_divren(&mut self, n: usize, val: super::vals::Divp1en) {
-                assert!(n < 3usize);
-                let offs = 18usize + n * 3usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Pllcfgr {
-            fn default() -> Pllcfgr {
-                Pllcfgr(0)
-            }
-        }
-        #[doc = "RCC PLL3 Dividers Configuration Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Pll3divr(pub u32);
-        impl Pll3divr {
-            #[doc = "Multiplication factor for PLL1 VCO"]
-            pub const fn divn3(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x01ff;
-                val as u16
-            }
-            #[doc = "Multiplication factor for PLL1 VCO"]
-            pub fn set_divn3(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize);
-            }
-            #[doc = "PLL DIVP division factor"]
-            pub const fn divp3(&self) -> u8 {
-                let val = (self.0 >> 9usize) & 0x7f;
-                val as u8
-            }
-            #[doc = "PLL DIVP division factor"]
-            pub fn set_divp3(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x7f << 9usize)) | (((val as u32) & 0x7f) << 9usize);
-            }
-            #[doc = "PLL DIVQ division factor"]
-            pub const fn divq3(&self) -> u8 {
-                let val = (self.0 >> 16usize) & 0x7f;
-                val as u8
-            }
-            #[doc = "PLL DIVQ division factor"]
-            pub fn set_divq3(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x7f << 16usize)) | (((val as u32) & 0x7f) << 16usize);
-            }
-            #[doc = "PLL DIVR division factor"]
-            pub const fn divr3(&self) -> u8 {
-                let val = (self.0 >> 24usize) & 0x7f;
-                val as u8
-            }
-            #[doc = "PLL DIVR division factor"]
-            pub fn set_divr3(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize);
-            }
-        }
-        impl Default for Pll3divr {
-            fn default() -> Pll3divr {
-                Pll3divr(0)
-            }
-        }
-        #[doc = "RCC AHB4 Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ahb4enr(pub u32);
-        impl Ahb4enr {
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpioaen(&self) -> super::vals::Ahb4enrGpioaen {
+        pub struct Bdcr(pub u32);
+        impl Bdcr {
+            #[doc = "LSE oscillator enabled"]
+            pub const fn lseon(&self) -> super::vals::Lseon {
                 let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
+                super::vals::Lseon(val as u8)
             }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpioaen(&mut self, val: super::vals::Ahb4enrGpioaen) {
+            #[doc = "LSE oscillator enabled"]
+            pub fn set_lseon(&mut self, val: super::vals::Lseon) {
                 self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
             }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpioben(&self) -> super::vals::Ahb4enrGpioaen {
+            #[doc = "LSE oscillator ready"]
+            pub const fn lserdy(&self) -> bool {
                 let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
+                val != 0
             }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpioben(&mut self, val: super::vals::Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            #[doc = "LSE oscillator ready"]
+            pub fn set_lserdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
             }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpiocen(&self) -> super::vals::Ahb4enrGpioaen {
+            #[doc = "LSE oscillator bypass"]
+            pub const fn lsebyp(&self) -> super::vals::Lsebyp {
                 let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
+                super::vals::Lsebyp(val as u8)
             }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpiocen(&mut self, val: super::vals::Ahb4enrGpioaen) {
+            #[doc = "LSE oscillator bypass"]
+            pub fn set_lsebyp(&mut self, val: super::vals::Lsebyp) {
                 self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
             }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpioden(&self) -> super::vals::Ahb4enrGpioaen {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
+            #[doc = "LSE oscillator driving capability"]
+            pub const fn lsedrv(&self) -> super::vals::Lsedrv {
+                let val = (self.0 >> 3usize) & 0x03;
+                super::vals::Lsedrv(val as u8)
             }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpioden(&mut self, val: super::vals::Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            #[doc = "LSE oscillator driving capability"]
+            pub fn set_lsedrv(&mut self, val: super::vals::Lsedrv) {
+                self.0 = (self.0 & !(0x03 << 3usize)) | (((val.0 as u32) & 0x03) << 3usize);
             }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpioeen(&self) -> super::vals::Ahb4enrGpioaen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpioeen(&mut self, val: super::vals::Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpiofen(&self) -> super::vals::Ahb4enrGpioaen {
+            #[doc = "LSE clock security system enable"]
+            pub const fn lsecsson(&self) -> super::vals::Lsecsson {
                 let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
+                super::vals::Lsecsson(val as u8)
             }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpiofen(&mut self, val: super::vals::Ahb4enrGpioaen) {
+            #[doc = "LSE clock security system enable"]
+            pub fn set_lsecsson(&mut self, val: super::vals::Lsecsson) {
                 self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
             }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpiogen(&self) -> super::vals::Ahb4enrGpioaen {
+            #[doc = "LSE clock security system failure detection"]
+            pub const fn lsecssd(&self) -> bool {
                 let val = (self.0 >> 6usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
+                val != 0
             }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpiogen(&mut self, val: super::vals::Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            #[doc = "LSE clock security system failure detection"]
+            pub fn set_lsecssd(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
             }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpiohen(&self) -> super::vals::Ahb4enrGpioaen {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
+            #[doc = "RTC clock source selection"]
+            pub const fn rtcsel(&self) -> super::vals::Rtcsel {
+                let val = (self.0 >> 8usize) & 0x03;
+                super::vals::Rtcsel(val as u8)
             }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpiohen(&mut self, val: super::vals::Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            #[doc = "RTC clock source selection"]
+            pub fn set_rtcsel(&mut self, val: super::vals::Rtcsel) {
+                self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize);
             }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpioien(&self) -> super::vals::Ahb4enrGpioaen {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpioien(&mut self, val: super::vals::Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpiojen(&self) -> super::vals::Ahb4enrGpioaen {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpiojen(&mut self, val: super::vals::Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub const fn gpioken(&self) -> super::vals::Ahb4enrGpioaen {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "0GPIO peripheral clock enable"]
-            pub fn set_gpioken(&mut self, val: super::vals::Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "CRC peripheral clock enable"]
-            pub const fn crcen(&self) -> super::vals::Ahb4enrGpioaen {
-                let val = (self.0 >> 19usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "CRC peripheral clock enable"]
-            pub fn set_crcen(&mut self, val: super::vals::Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
-            }
-            #[doc = "BDMA and DMAMUX2 Clock Enable"]
-            pub const fn bdmaen(&self) -> super::vals::Ahb4enrGpioaen {
-                let val = (self.0 >> 21usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "BDMA and DMAMUX2 Clock Enable"]
-            pub fn set_bdmaen(&mut self, val: super::vals::Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
-            }
-            #[doc = "ADC3 Peripheral Clocks Enable"]
-            pub const fn adc3en(&self) -> super::vals::Ahb4enrGpioaen {
-                let val = (self.0 >> 24usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "ADC3 Peripheral Clocks Enable"]
-            pub fn set_adc3en(&mut self, val: super::vals::Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
-            }
-            #[doc = "HSEM peripheral clock enable"]
-            pub const fn hsemen(&self) -> super::vals::Ahb4enrGpioaen {
-                let val = (self.0 >> 25usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "HSEM peripheral clock enable"]
-            pub fn set_hsemen(&mut self, val: super::vals::Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
-            }
-            #[doc = "Backup RAM Clock Enable"]
-            pub const fn bkpramen(&self) -> super::vals::Ahb4enrGpioaen {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::Ahb4enrGpioaen(val as u8)
-            }
-            #[doc = "Backup RAM Clock Enable"]
-            pub fn set_bkpramen(&mut self, val: super::vals::Ahb4enrGpioaen) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
-            }
-        }
-        impl Default for Ahb4enr {
-            fn default() -> Ahb4enr {
-                Ahb4enr(0)
-            }
-        }
-        #[doc = "RCC APB1 Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb1henr(pub u32);
-        impl Apb1henr {
-            #[doc = "Clock Recovery System peripheral clock enable"]
-            pub const fn crsen(&self) -> super::vals::Apb1henrCrsen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Apb1henrCrsen(val as u8)
-            }
-            #[doc = "Clock Recovery System peripheral clock enable"]
-            pub fn set_crsen(&mut self, val: super::vals::Apb1henrCrsen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "SWPMI Peripheral Clocks Enable"]
-            pub const fn swpen(&self) -> super::vals::Apb1henrCrsen {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Apb1henrCrsen(val as u8)
-            }
-            #[doc = "SWPMI Peripheral Clocks Enable"]
-            pub fn set_swpen(&mut self, val: super::vals::Apb1henrCrsen) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "OPAMP peripheral clock enable"]
-            pub const fn opampen(&self) -> super::vals::Apb1henrCrsen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Apb1henrCrsen(val as u8)
-            }
-            #[doc = "OPAMP peripheral clock enable"]
-            pub fn set_opampen(&mut self, val: super::vals::Apb1henrCrsen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "MDIOS peripheral clock enable"]
-            pub const fn mdiosen(&self) -> super::vals::Apb1henrCrsen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Apb1henrCrsen(val as u8)
-            }
-            #[doc = "MDIOS peripheral clock enable"]
-            pub fn set_mdiosen(&mut self, val: super::vals::Apb1henrCrsen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "FDCAN Peripheral Clocks Enable"]
-            pub const fn fdcanen(&self) -> super::vals::Apb1henrCrsen {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::Apb1henrCrsen(val as u8)
-            }
-            #[doc = "FDCAN Peripheral Clocks Enable"]
-            pub fn set_fdcanen(&mut self, val: super::vals::Apb1henrCrsen) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
-            }
-        }
-        impl Default for Apb1henr {
-            fn default() -> Apb1henr {
-                Apb1henr(0)
-            }
-        }
-        #[doc = "RCC APB4 Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb4enr(pub u32);
-        impl Apb4enr {
-            #[doc = "SYSCFG peripheral clock enable"]
-            pub const fn syscfgen(&self) -> super::vals::Apb4enrSyscfgen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "SYSCFG peripheral clock enable"]
-            pub fn set_syscfgen(&mut self, val: super::vals::Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "LPUART1 Peripheral Clocks Enable"]
-            pub const fn lpuart1en(&self) -> super::vals::Apb4enrSyscfgen {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "LPUART1 Peripheral Clocks Enable"]
-            pub fn set_lpuart1en(&mut self, val: super::vals::Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "SPI6 Peripheral Clocks Enable"]
-            pub const fn spi6en(&self) -> super::vals::Apb4enrSyscfgen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "SPI6 Peripheral Clocks Enable"]
-            pub fn set_spi6en(&mut self, val: super::vals::Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "I2C4 Peripheral Clocks Enable"]
-            pub const fn i2c4en(&self) -> super::vals::Apb4enrSyscfgen {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "I2C4 Peripheral Clocks Enable"]
-            pub fn set_i2c4en(&mut self, val: super::vals::Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "LPTIM2 Peripheral Clocks Enable"]
-            pub const fn lptim2en(&self) -> super::vals::Apb4enrSyscfgen {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "LPTIM2 Peripheral Clocks Enable"]
-            pub fn set_lptim2en(&mut self, val: super::vals::Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "LPTIM3 Peripheral Clocks Enable"]
-            pub const fn lptim3en(&self) -> super::vals::Apb4enrSyscfgen {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "LPTIM3 Peripheral Clocks Enable"]
-            pub fn set_lptim3en(&mut self, val: super::vals::Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "LPTIM4 Peripheral Clocks Enable"]
-            pub const fn lptim4en(&self) -> super::vals::Apb4enrSyscfgen {
-                let val = (self.0 >> 11usize) & 0x01;
-                super::vals::Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "LPTIM4 Peripheral Clocks Enable"]
-            pub fn set_lptim4en(&mut self, val: super::vals::Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
-            }
-            #[doc = "LPTIM5 Peripheral Clocks Enable"]
-            pub const fn lptim5en(&self) -> super::vals::Apb4enrSyscfgen {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "LPTIM5 Peripheral Clocks Enable"]
-            pub fn set_lptim5en(&mut self, val: super::vals::Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "COMP1/2 peripheral clock enable"]
-            pub const fn comp12en(&self) -> super::vals::Apb4enrSyscfgen {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "COMP1/2 peripheral clock enable"]
-            pub fn set_comp12en(&mut self, val: super::vals::Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "VREF peripheral clock enable"]
-            pub const fn vrefen(&self) -> super::vals::Apb4enrSyscfgen {
+            #[doc = "RTC clock enable"]
+            pub const fn rtcen(&self) -> super::vals::Rtcen {
                 let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Apb4enrSyscfgen(val as u8)
+                super::vals::Rtcen(val as u8)
             }
-            #[doc = "VREF peripheral clock enable"]
-            pub fn set_vrefen(&mut self, val: super::vals::Apb4enrSyscfgen) {
+            #[doc = "RTC clock enable"]
+            pub fn set_rtcen(&mut self, val: super::vals::Rtcen) {
                 self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
             }
-            #[doc = "RTC APB Clock Enable"]
-            pub const fn rtcapben(&self) -> super::vals::Apb4enrSyscfgen {
+            #[doc = "VSwitch domain software reset"]
+            pub const fn bdrst(&self) -> super::vals::Bdrst {
                 let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Apb4enrSyscfgen(val as u8)
+                super::vals::Bdrst(val as u8)
             }
-            #[doc = "RTC APB Clock Enable"]
-            pub fn set_rtcapben(&mut self, val: super::vals::Apb4enrSyscfgen) {
+            #[doc = "VSwitch domain software reset"]
+            pub fn set_bdrst(&mut self, val: super::vals::Bdrst) {
                 self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
             }
-            #[doc = "SAI4 Peripheral Clocks Enable"]
-            pub const fn sai4en(&self) -> super::vals::Apb4enrSyscfgen {
-                let val = (self.0 >> 21usize) & 0x01;
-                super::vals::Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "SAI4 Peripheral Clocks Enable"]
-            pub fn set_sai4en(&mut self, val: super::vals::Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
-            }
         }
-        impl Default for Apb4enr {
-            fn default() -> Apb4enr {
-                Apb4enr(0)
-            }
-        }
-        #[doc = "RCC Clock Recovery RC Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Crrcr(pub u32);
-        impl Crrcr {
-            #[doc = "Internal RC 48 MHz clock calibration"]
-            pub const fn hsi48cal(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x03ff;
-                val as u16
-            }
-            #[doc = "Internal RC 48 MHz clock calibration"]
-            pub fn set_hsi48cal(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x03ff << 0usize)) | (((val as u32) & 0x03ff) << 0usize);
-            }
-        }
-        impl Default for Crrcr {
-            fn default() -> Crrcr {
-                Crrcr(0)
+        impl Default for Bdcr {
+            fn default() -> Bdcr {
+                Bdcr(0)
             }
         }
         #[doc = "RCC Reset Status Register"]
@@ -7384,33 +3950,450 @@ pub mod rcc_h7 {
                 Rsr(0)
             }
         }
-        #[doc = "RCC Clock Control and Status Register"]
+        #[doc = "RCC Internal Clock Source Calibration Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Csr(pub u32);
-        impl Csr {
-            #[doc = "LSI oscillator enable"]
-            pub const fn lsion(&self) -> super::vals::Lsion {
+        pub struct Icscr(pub u32);
+        impl Icscr {
+            #[doc = "HSI clock calibration"]
+            pub const fn hsical(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x0fff;
+                val as u16
+            }
+            #[doc = "HSI clock calibration"]
+            pub fn set_hsical(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
+            }
+            #[doc = "HSI clock trimming"]
+            pub const fn hsitrim(&self) -> u8 {
+                let val = (self.0 >> 12usize) & 0x3f;
+                val as u8
+            }
+            #[doc = "HSI clock trimming"]
+            pub fn set_hsitrim(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x3f << 12usize)) | (((val as u32) & 0x3f) << 12usize);
+            }
+            #[doc = "CSI clock calibration"]
+            pub const fn csical(&self) -> u8 {
+                let val = (self.0 >> 18usize) & 0xff;
+                val as u8
+            }
+            #[doc = "CSI clock calibration"]
+            pub fn set_csical(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 18usize)) | (((val as u32) & 0xff) << 18usize);
+            }
+            #[doc = "CSI clock trimming"]
+            pub const fn csitrim(&self) -> u8 {
+                let val = (self.0 >> 26usize) & 0x1f;
+                val as u8
+            }
+            #[doc = "CSI clock trimming"]
+            pub fn set_csitrim(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x1f << 26usize)) | (((val as u32) & 0x1f) << 26usize);
+            }
+        }
+        impl Default for Icscr {
+            fn default() -> Icscr {
+                Icscr(0)
+            }
+        }
+        #[doc = "RCC APB4 Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct C1Apb4enr(pub u32);
+        impl C1Apb4enr {
+            #[doc = "SYSCFG peripheral clock enable"]
+            pub const fn syscfgen(&self) -> super::vals::C1Apb4enrSyscfgen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::C1Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "SYSCFG peripheral clock enable"]
+            pub fn set_syscfgen(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "LPUART1 Peripheral Clocks Enable"]
+            pub const fn lpuart1en(&self) -> super::vals::C1Apb4enrSyscfgen {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::C1Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "LPUART1 Peripheral Clocks Enable"]
+            pub fn set_lpuart1en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "SPI6 Peripheral Clocks Enable"]
+            pub const fn spi6en(&self) -> super::vals::C1Apb4enrSyscfgen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::C1Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "SPI6 Peripheral Clocks Enable"]
+            pub fn set_spi6en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "I2C4 Peripheral Clocks Enable"]
+            pub const fn i2c4en(&self) -> super::vals::C1Apb4enrSyscfgen {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::C1Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "I2C4 Peripheral Clocks Enable"]
+            pub fn set_i2c4en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "LPTIM2 Peripheral Clocks Enable"]
+            pub const fn lptim2en(&self) -> super::vals::C1Apb4enrSyscfgen {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::C1Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "LPTIM2 Peripheral Clocks Enable"]
+            pub fn set_lptim2en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "LPTIM3 Peripheral Clocks Enable"]
+            pub const fn lptim3en(&self) -> super::vals::C1Apb4enrSyscfgen {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::C1Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "LPTIM3 Peripheral Clocks Enable"]
+            pub fn set_lptim3en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "LPTIM4 Peripheral Clocks Enable"]
+            pub const fn lptim4en(&self) -> super::vals::C1Apb4enrSyscfgen {
+                let val = (self.0 >> 11usize) & 0x01;
+                super::vals::C1Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "LPTIM4 Peripheral Clocks Enable"]
+            pub fn set_lptim4en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
+            }
+            #[doc = "LPTIM5 Peripheral Clocks Enable"]
+            pub const fn lptim5en(&self) -> super::vals::C1Apb4enrSyscfgen {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::C1Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "LPTIM5 Peripheral Clocks Enable"]
+            pub fn set_lptim5en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "COMP1/2 peripheral clock enable"]
+            pub const fn comp12en(&self) -> super::vals::C1Apb4enrSyscfgen {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::C1Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "COMP1/2 peripheral clock enable"]
+            pub fn set_comp12en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "VREF peripheral clock enable"]
+            pub const fn vrefen(&self) -> super::vals::C1Apb4enrSyscfgen {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::C1Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "VREF peripheral clock enable"]
+            pub fn set_vrefen(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "RTC APB Clock Enable"]
+            pub const fn rtcapben(&self) -> super::vals::C1Apb4enrSyscfgen {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::C1Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "RTC APB Clock Enable"]
+            pub fn set_rtcapben(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "SAI4 Peripheral Clocks Enable"]
+            pub const fn sai4en(&self) -> super::vals::C1Apb4enrSyscfgen {
+                let val = (self.0 >> 21usize) & 0x01;
+                super::vals::C1Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "SAI4 Peripheral Clocks Enable"]
+            pub fn set_sai4en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
+            }
+        }
+        impl Default for C1Apb4enr {
+            fn default() -> C1Apb4enr {
+                C1Apb4enr(0)
+            }
+        }
+        #[doc = "RCC Clock Source Interrupt Flag Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cifr(pub u32);
+        impl Cifr {
+            #[doc = "LSI ready Interrupt Flag"]
+            pub const fn lsirdyf(&self) -> bool {
                 let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Lsion(val as u8)
+                val != 0
             }
-            #[doc = "LSI oscillator enable"]
-            pub fn set_lsion(&mut self, val: super::vals::Lsion) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            #[doc = "LSI ready Interrupt Flag"]
+            pub fn set_lsirdyf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
             }
-            #[doc = "LSI oscillator ready"]
-            pub const fn lsirdy(&self) -> bool {
+            #[doc = "LSE ready Interrupt Flag"]
+            pub const fn lserdyf(&self) -> bool {
                 let val = (self.0 >> 1usize) & 0x01;
                 val != 0
             }
-            #[doc = "LSI oscillator ready"]
-            pub fn set_lsirdy(&mut self, val: bool) {
+            #[doc = "LSE ready Interrupt Flag"]
+            pub fn set_lserdyf(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
             }
+            #[doc = "HSI ready Interrupt Flag"]
+            pub const fn hsirdyf(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "HSI ready Interrupt Flag"]
+            pub fn set_hsirdyf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "HSE ready Interrupt Flag"]
+            pub const fn hserdyf(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "HSE ready Interrupt Flag"]
+            pub fn set_hserdyf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "CSI ready Interrupt Flag"]
+            pub const fn csirdy(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CSI ready Interrupt Flag"]
+            pub fn set_csirdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "RC48 ready Interrupt Flag"]
+            pub const fn hsi48rdyf(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "RC48 ready Interrupt Flag"]
+            pub fn set_hsi48rdyf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "PLL1 ready Interrupt Flag"]
+            pub fn pllrdyf(&self, n: usize) -> bool {
+                assert!(n < 3usize);
+                let offs = 6usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "PLL1 ready Interrupt Flag"]
+            pub fn set_pllrdyf(&mut self, n: usize, val: bool) {
+                assert!(n < 3usize);
+                let offs = 6usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "LSE clock security system Interrupt Flag"]
+            pub const fn lsecssf(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LSE clock security system Interrupt Flag"]
+            pub fn set_lsecssf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "HSE clock security system Interrupt Flag"]
+            pub const fn hsecssf(&self) -> bool {
+                let val = (self.0 >> 10usize) & 0x01;
+                val != 0
+            }
+            #[doc = "HSE clock security system Interrupt Flag"]
+            pub fn set_hsecssf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            }
         }
-        impl Default for Csr {
-            fn default() -> Csr {
-                Csr(0)
+        impl Default for Cifr {
+            fn default() -> Cifr {
+                Cifr(0)
+            }
+        }
+        #[doc = "RCC Domain 2 Kernel Clock Configuration Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct D2ccip2r(pub u32);
+        impl D2ccip2r {
+            #[doc = "USART2/3, UART4,5, 7/8 (APB1) kernel clock source selection"]
+            pub const fn usart234578sel(&self) -> super::vals::Usart234578sel {
+                let val = (self.0 >> 0usize) & 0x07;
+                super::vals::Usart234578sel(val as u8)
+            }
+            #[doc = "USART2/3, UART4,5, 7/8 (APB1) kernel clock source selection"]
+            pub fn set_usart234578sel(&mut self, val: super::vals::Usart234578sel) {
+                self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize);
+            }
+            #[doc = "USART1 and 6 kernel clock source selection"]
+            pub const fn usart16sel(&self) -> super::vals::Usart16sel {
+                let val = (self.0 >> 3usize) & 0x07;
+                super::vals::Usart16sel(val as u8)
+            }
+            #[doc = "USART1 and 6 kernel clock source selection"]
+            pub fn set_usart16sel(&mut self, val: super::vals::Usart16sel) {
+                self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize);
+            }
+            #[doc = "RNG kernel clock source selection"]
+            pub const fn rngsel(&self) -> super::vals::Rngsel {
+                let val = (self.0 >> 8usize) & 0x03;
+                super::vals::Rngsel(val as u8)
+            }
+            #[doc = "RNG kernel clock source selection"]
+            pub fn set_rngsel(&mut self, val: super::vals::Rngsel) {
+                self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize);
+            }
+            #[doc = "I2C1,2,3 kernel clock source selection"]
+            pub const fn i2c123sel(&self) -> super::vals::I2c123sel {
+                let val = (self.0 >> 12usize) & 0x03;
+                super::vals::I2c123sel(val as u8)
+            }
+            #[doc = "I2C1,2,3 kernel clock source selection"]
+            pub fn set_i2c123sel(&mut self, val: super::vals::I2c123sel) {
+                self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize);
+            }
+            #[doc = "USBOTG 1 and 2 kernel clock source selection"]
+            pub const fn usbsel(&self) -> super::vals::Usbsel {
+                let val = (self.0 >> 20usize) & 0x03;
+                super::vals::Usbsel(val as u8)
+            }
+            #[doc = "USBOTG 1 and 2 kernel clock source selection"]
+            pub fn set_usbsel(&mut self, val: super::vals::Usbsel) {
+                self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize);
+            }
+            #[doc = "HDMI-CEC kernel clock source selection"]
+            pub const fn cecsel(&self) -> super::vals::Cecsel {
+                let val = (self.0 >> 22usize) & 0x03;
+                super::vals::Cecsel(val as u8)
+            }
+            #[doc = "HDMI-CEC kernel clock source selection"]
+            pub fn set_cecsel(&mut self, val: super::vals::Cecsel) {
+                self.0 = (self.0 & !(0x03 << 22usize)) | (((val.0 as u32) & 0x03) << 22usize);
+            }
+            #[doc = "LPTIM1 kernel clock source selection"]
+            pub const fn lptim1sel(&self) -> super::vals::Lptim1sel {
+                let val = (self.0 >> 28usize) & 0x07;
+                super::vals::Lptim1sel(val as u8)
+            }
+            #[doc = "LPTIM1 kernel clock source selection"]
+            pub fn set_lptim1sel(&mut self, val: super::vals::Lptim1sel) {
+                self.0 = (self.0 & !(0x07 << 28usize)) | (((val.0 as u32) & 0x07) << 28usize);
+            }
+        }
+        impl Default for D2ccip2r {
+            fn default() -> D2ccip2r {
+                D2ccip2r(0)
+            }
+        }
+        #[doc = "RCC Clock Configuration Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cfgr(pub u32);
+        impl Cfgr {
+            #[doc = "System clock switch"]
+            pub const fn sw(&self) -> super::vals::Sw {
+                let val = (self.0 >> 0usize) & 0x07;
+                super::vals::Sw(val as u8)
+            }
+            #[doc = "System clock switch"]
+            pub fn set_sw(&mut self, val: super::vals::Sw) {
+                self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize);
+            }
+            #[doc = "System clock switch status"]
+            pub const fn sws(&self) -> u8 {
+                let val = (self.0 >> 3usize) & 0x07;
+                val as u8
+            }
+            #[doc = "System clock switch status"]
+            pub fn set_sws(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x07 << 3usize)) | (((val as u32) & 0x07) << 3usize);
+            }
+            #[doc = "System clock selection after a wake up from system Stop"]
+            pub const fn stopwuck(&self) -> super::vals::Stopwuck {
+                let val = (self.0 >> 6usize) & 0x01;
+                super::vals::Stopwuck(val as u8)
+            }
+            #[doc = "System clock selection after a wake up from system Stop"]
+            pub fn set_stopwuck(&mut self, val: super::vals::Stopwuck) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Kernel clock selection after a wake up from system Stop"]
+            pub const fn stopkerwuck(&self) -> super::vals::Stopwuck {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Stopwuck(val as u8)
+            }
+            #[doc = "Kernel clock selection after a wake up from system Stop"]
+            pub fn set_stopkerwuck(&mut self, val: super::vals::Stopwuck) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "HSE division factor for RTC clock"]
+            pub const fn rtcpre(&self) -> u8 {
+                let val = (self.0 >> 8usize) & 0x3f;
+                val as u8
+            }
+            #[doc = "HSE division factor for RTC clock"]
+            pub fn set_rtcpre(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x3f << 8usize)) | (((val as u32) & 0x3f) << 8usize);
+            }
+            #[doc = "High Resolution Timer clock prescaler selection"]
+            pub const fn hrtimsel(&self) -> super::vals::Hrtimsel {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Hrtimsel(val as u8)
+            }
+            #[doc = "High Resolution Timer clock prescaler selection"]
+            pub fn set_hrtimsel(&mut self, val: super::vals::Hrtimsel) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "Timers clocks prescaler selection"]
+            pub const fn timpre(&self) -> super::vals::Timpre {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Timpre(val as u8)
+            }
+            #[doc = "Timers clocks prescaler selection"]
+            pub fn set_timpre(&mut self, val: super::vals::Timpre) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "MCO1 prescaler"]
+            pub const fn mco1pre(&self) -> u8 {
+                let val = (self.0 >> 18usize) & 0x0f;
+                val as u8
+            }
+            #[doc = "MCO1 prescaler"]
+            pub fn set_mco1pre(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x0f << 18usize)) | (((val as u32) & 0x0f) << 18usize);
+            }
+            #[doc = "Micro-controller clock output 1"]
+            pub const fn mco1(&self) -> super::vals::Mco1 {
+                let val = (self.0 >> 22usize) & 0x07;
+                super::vals::Mco1(val as u8)
+            }
+            #[doc = "Micro-controller clock output 1"]
+            pub fn set_mco1(&mut self, val: super::vals::Mco1) {
+                self.0 = (self.0 & !(0x07 << 22usize)) | (((val.0 as u32) & 0x07) << 22usize);
+            }
+            #[doc = "MCO2 prescaler"]
+            pub const fn mco2pre(&self) -> u8 {
+                let val = (self.0 >> 25usize) & 0x0f;
+                val as u8
+            }
+            #[doc = "MCO2 prescaler"]
+            pub fn set_mco2pre(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x0f << 25usize)) | (((val as u32) & 0x0f) << 25usize);
+            }
+            #[doc = "Micro-controller clock output 2"]
+            pub const fn mco2(&self) -> super::vals::Mco2 {
+                let val = (self.0 >> 29usize) & 0x07;
+                super::vals::Mco2(val as u8)
+            }
+            #[doc = "Micro-controller clock output 2"]
+            pub fn set_mco2(&mut self, val: super::vals::Mco2) {
+                self.0 = (self.0 & !(0x07 << 29usize)) | (((val.0 as u32) & 0x07) << 29usize);
+            }
+        }
+        impl Default for Cfgr {
+            fn default() -> Cfgr {
+                Cfgr(0)
             }
         }
         #[doc = "RCC Domain 2 Clock Configuration Register"]
@@ -7442,6 +4425,369 @@ pub mod rcc_h7 {
                 D2cfgr(0)
             }
         }
+        #[doc = "RCC Domain 2 Kernel Clock Configuration Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct D2ccip1r(pub u32);
+        impl D2ccip1r {
+            #[doc = "SAI1 and DFSDM1 kernel Aclk clock source selection"]
+            pub const fn sai1sel(&self) -> super::vals::Sai1sel {
+                let val = (self.0 >> 0usize) & 0x07;
+                super::vals::Sai1sel(val as u8)
+            }
+            #[doc = "SAI1 and DFSDM1 kernel Aclk clock source selection"]
+            pub fn set_sai1sel(&mut self, val: super::vals::Sai1sel) {
+                self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize);
+            }
+            #[doc = "SAI2 and SAI3 kernel clock source selection"]
+            pub const fn sai23sel(&self) -> super::vals::Sai1sel {
+                let val = (self.0 >> 6usize) & 0x07;
+                super::vals::Sai1sel(val as u8)
+            }
+            #[doc = "SAI2 and SAI3 kernel clock source selection"]
+            pub fn set_sai23sel(&mut self, val: super::vals::Sai1sel) {
+                self.0 = (self.0 & !(0x07 << 6usize)) | (((val.0 as u32) & 0x07) << 6usize);
+            }
+            #[doc = "SPI/I2S1,2 and 3 kernel clock source selection"]
+            pub const fn spi123sel(&self) -> super::vals::Sai1sel {
+                let val = (self.0 >> 12usize) & 0x07;
+                super::vals::Sai1sel(val as u8)
+            }
+            #[doc = "SPI/I2S1,2 and 3 kernel clock source selection"]
+            pub fn set_spi123sel(&mut self, val: super::vals::Sai1sel) {
+                self.0 = (self.0 & !(0x07 << 12usize)) | (((val.0 as u32) & 0x07) << 12usize);
+            }
+            #[doc = "SPI4 and 5 kernel clock source selection"]
+            pub const fn spi45sel(&self) -> super::vals::Spi45sel {
+                let val = (self.0 >> 16usize) & 0x07;
+                super::vals::Spi45sel(val as u8)
+            }
+            #[doc = "SPI4 and 5 kernel clock source selection"]
+            pub fn set_spi45sel(&mut self, val: super::vals::Spi45sel) {
+                self.0 = (self.0 & !(0x07 << 16usize)) | (((val.0 as u32) & 0x07) << 16usize);
+            }
+            #[doc = "SPDIFRX kernel clock source selection"]
+            pub const fn spdifsel(&self) -> super::vals::Spdifsel {
+                let val = (self.0 >> 20usize) & 0x03;
+                super::vals::Spdifsel(val as u8)
+            }
+            #[doc = "SPDIFRX kernel clock source selection"]
+            pub fn set_spdifsel(&mut self, val: super::vals::Spdifsel) {
+                self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize);
+            }
+            #[doc = "DFSDM1 kernel Clk clock source selection"]
+            pub const fn dfsdm1sel(&self) -> super::vals::Dfsdm1sel {
+                let val = (self.0 >> 24usize) & 0x01;
+                super::vals::Dfsdm1sel(val as u8)
+            }
+            #[doc = "DFSDM1 kernel Clk clock source selection"]
+            pub fn set_dfsdm1sel(&mut self, val: super::vals::Dfsdm1sel) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
+            }
+            #[doc = "FDCAN kernel clock source selection"]
+            pub const fn fdcansel(&self) -> super::vals::Fdcansel {
+                let val = (self.0 >> 28usize) & 0x03;
+                super::vals::Fdcansel(val as u8)
+            }
+            #[doc = "FDCAN kernel clock source selection"]
+            pub fn set_fdcansel(&mut self, val: super::vals::Fdcansel) {
+                self.0 = (self.0 & !(0x03 << 28usize)) | (((val.0 as u32) & 0x03) << 28usize);
+            }
+            #[doc = "SWPMI kernel clock source selection"]
+            pub const fn swpsel(&self) -> super::vals::Swpsel {
+                let val = (self.0 >> 31usize) & 0x01;
+                super::vals::Swpsel(val as u8)
+            }
+            #[doc = "SWPMI kernel clock source selection"]
+            pub fn set_swpsel(&mut self, val: super::vals::Swpsel) {
+                self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
+            }
+        }
+        impl Default for D2ccip1r {
+            fn default() -> D2ccip1r {
+                D2ccip1r(0)
+            }
+        }
+        #[doc = "RCC AHB2 Peripheral Reset Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ahb2rstr(pub u32);
+        impl Ahb2rstr {
+            #[doc = "CAMITF block reset"]
+            pub const fn camitfrst(&self) -> super::vals::Camitfrst {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Camitfrst(val as u8)
+            }
+            #[doc = "CAMITF block reset"]
+            pub fn set_camitfrst(&mut self, val: super::vals::Camitfrst) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Cryptography block reset"]
+            pub const fn cryptrst(&self) -> super::vals::Camitfrst {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Camitfrst(val as u8)
+            }
+            #[doc = "Cryptography block reset"]
+            pub fn set_cryptrst(&mut self, val: super::vals::Camitfrst) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Hash block reset"]
+            pub const fn hashrst(&self) -> super::vals::Camitfrst {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Camitfrst(val as u8)
+            }
+            #[doc = "Hash block reset"]
+            pub fn set_hashrst(&mut self, val: super::vals::Camitfrst) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Random Number Generator block reset"]
+            pub const fn rngrst(&self) -> super::vals::Camitfrst {
+                let val = (self.0 >> 6usize) & 0x01;
+                super::vals::Camitfrst(val as u8)
+            }
+            #[doc = "Random Number Generator block reset"]
+            pub fn set_rngrst(&mut self, val: super::vals::Camitfrst) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            }
+            #[doc = "SDMMC2 and SDMMC2 Delay block reset"]
+            pub const fn sdmmc2rst(&self) -> super::vals::Camitfrst {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Camitfrst(val as u8)
+            }
+            #[doc = "SDMMC2 and SDMMC2 Delay block reset"]
+            pub fn set_sdmmc2rst(&mut self, val: super::vals::Camitfrst) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+        }
+        impl Default for Ahb2rstr {
+            fn default() -> Ahb2rstr {
+                Ahb2rstr(0)
+            }
+        }
+        #[doc = "RCC AHB1 Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ahb1enr(pub u32);
+        impl Ahb1enr {
+            #[doc = "DMA1 Clock Enable"]
+            pub const fn dma1en(&self) -> super::vals::Ahb1enrDma1en {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "DMA1 Clock Enable"]
+            pub fn set_dma1en(&mut self, val: super::vals::Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "DMA2 Clock Enable"]
+            pub const fn dma2en(&self) -> super::vals::Ahb1enrDma1en {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "DMA2 Clock Enable"]
+            pub fn set_dma2en(&mut self, val: super::vals::Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "ADC1/2 Peripheral Clocks Enable"]
+            pub const fn adc12en(&self) -> super::vals::Ahb1enrDma1en {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "ADC1/2 Peripheral Clocks Enable"]
+            pub fn set_adc12en(&mut self, val: super::vals::Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Ethernet MAC bus interface Clock Enable"]
+            pub const fn eth1macen(&self) -> super::vals::Ahb1enrDma1en {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "Ethernet MAC bus interface Clock Enable"]
+            pub fn set_eth1macen(&mut self, val: super::vals::Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "Ethernet Transmission Clock Enable"]
+            pub const fn eth1txen(&self) -> super::vals::Ahb1enrDma1en {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "Ethernet Transmission Clock Enable"]
+            pub fn set_eth1txen(&mut self, val: super::vals::Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "Ethernet Reception Clock Enable"]
+            pub const fn eth1rxen(&self) -> super::vals::Ahb1enrDma1en {
+                let val = (self.0 >> 17usize) & 0x01;
+                super::vals::Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "Ethernet Reception Clock Enable"]
+            pub fn set_eth1rxen(&mut self, val: super::vals::Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
+            }
+            #[doc = "Enable USB_PHY2 clocks"]
+            pub const fn usb2otghsulpien(&self) -> super::vals::Ahb1enrDma1en {
+                let val = (self.0 >> 18usize) & 0x01;
+                super::vals::Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "Enable USB_PHY2 clocks"]
+            pub fn set_usb2otghsulpien(&mut self, val: super::vals::Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
+            }
+            #[doc = "USB1OTG Peripheral Clocks Enable"]
+            pub const fn usb1otgen(&self) -> super::vals::Ahb1enrDma1en {
+                let val = (self.0 >> 25usize) & 0x01;
+                super::vals::Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "USB1OTG Peripheral Clocks Enable"]
+            pub fn set_usb1otgen(&mut self, val: super::vals::Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
+            }
+            #[doc = "USB_PHY1 Clocks Enable"]
+            pub const fn usb1ulpien(&self) -> super::vals::Ahb1enrDma1en {
+                let val = (self.0 >> 26usize) & 0x01;
+                super::vals::Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "USB_PHY1 Clocks Enable"]
+            pub fn set_usb1ulpien(&mut self, val: super::vals::Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize);
+            }
+            #[doc = "USB2OTG Peripheral Clocks Enable"]
+            pub const fn usb2otgen(&self) -> super::vals::Ahb1enrDma1en {
+                let val = (self.0 >> 27usize) & 0x01;
+                super::vals::Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "USB2OTG Peripheral Clocks Enable"]
+            pub fn set_usb2otgen(&mut self, val: super::vals::Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
+            }
+            #[doc = "USB_PHY2 Clocks Enable"]
+            pub const fn usb2ulpien(&self) -> super::vals::Ahb1enrDma1en {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "USB_PHY2 Clocks Enable"]
+            pub fn set_usb2ulpien(&mut self, val: super::vals::Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
+            }
+        }
+        impl Default for Ahb1enr {
+            fn default() -> Ahb1enr {
+                Ahb1enr(0)
+            }
+        }
+        #[doc = "RCC APB3 Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct C1Apb3enr(pub u32);
+        impl C1Apb3enr {
+            #[doc = "LTDC peripheral clock enable"]
+            pub const fn ltdcen(&self) -> super::vals::C1Apb3enrLtdcen {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::C1Apb3enrLtdcen(val as u8)
+            }
+            #[doc = "LTDC peripheral clock enable"]
+            pub fn set_ltdcen(&mut self, val: super::vals::C1Apb3enrLtdcen) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "WWDG1 Clock Enable"]
+            pub const fn wwdg1en(&self) -> super::vals::C1Apb3enrLtdcen {
+                let val = (self.0 >> 6usize) & 0x01;
+                super::vals::C1Apb3enrLtdcen(val as u8)
+            }
+            #[doc = "WWDG1 Clock Enable"]
+            pub fn set_wwdg1en(&mut self, val: super::vals::C1Apb3enrLtdcen) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            }
+        }
+        impl Default for C1Apb3enr {
+            fn default() -> C1Apb3enr {
+                C1Apb3enr(0)
+            }
+        }
+        #[doc = "RCC APB1 Peripheral Reset Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Apb1hrstr(pub u32);
+        impl Apb1hrstr {
+            #[doc = "Clock Recovery System reset"]
+            pub const fn crsrst(&self) -> super::vals::Crsrst {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Crsrst(val as u8)
+            }
+            #[doc = "Clock Recovery System reset"]
+            pub fn set_crsrst(&mut self, val: super::vals::Crsrst) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "SWPMI block reset"]
+            pub const fn swprst(&self) -> super::vals::Crsrst {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Crsrst(val as u8)
+            }
+            #[doc = "SWPMI block reset"]
+            pub fn set_swprst(&mut self, val: super::vals::Crsrst) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "OPAMP block reset"]
+            pub const fn opamprst(&self) -> super::vals::Crsrst {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Crsrst(val as u8)
+            }
+            #[doc = "OPAMP block reset"]
+            pub fn set_opamprst(&mut self, val: super::vals::Crsrst) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "MDIOS block reset"]
+            pub const fn mdiosrst(&self) -> super::vals::Crsrst {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Crsrst(val as u8)
+            }
+            #[doc = "MDIOS block reset"]
+            pub fn set_mdiosrst(&mut self, val: super::vals::Crsrst) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "FDCAN block reset"]
+            pub const fn fdcanrst(&self) -> super::vals::Crsrst {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::Crsrst(val as u8)
+            }
+            #[doc = "FDCAN block reset"]
+            pub fn set_fdcanrst(&mut self, val: super::vals::Crsrst) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+        }
+        impl Default for Apb1hrstr {
+            fn default() -> Apb1hrstr {
+                Apb1hrstr(0)
+            }
+        }
+        #[doc = "RCC CSI configuration register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Csicfgr(pub u32);
+        impl Csicfgr {
+            #[doc = "CSI clock calibration"]
+            pub const fn csical(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x01ff;
+                val as u16
+            }
+            #[doc = "CSI clock calibration"]
+            pub fn set_csical(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize);
+            }
+            #[doc = "CSI clock trimming"]
+            pub const fn csitrim(&self) -> u8 {
+                let val = (self.0 >> 24usize) & 0x3f;
+                val as u8
+            }
+            #[doc = "CSI clock trimming"]
+            pub fn set_csitrim(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x3f << 24usize)) | (((val as u32) & 0x3f) << 24usize);
+            }
+        }
+        impl Default for Csicfgr {
+            fn default() -> Csicfgr {
+                Csicfgr(0)
+            }
+        }
         #[doc = "RCC APB1 Low Sleep Clock Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -7669,89 +5015,1987 @@ pub mod rcc_h7 {
                 C1Apb1llpenr(0)
             }
         }
-        #[doc = "RCC APB1 High Sleep Clock Register"]
+        #[doc = "RCC APB2 Clock Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb1hlpenr(pub u32);
-        impl Apb1hlpenr {
-            #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"]
-            pub const fn crslpen(&self) -> super::vals::Apb1hlpenrCrslpen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Apb1hlpenrCrslpen(val as u8)
+        pub struct Apb2enr(pub u32);
+        impl Apb2enr {
+            #[doc = "TIM1 peripheral clock enable"]
+            pub const fn tim1en(&self) -> super::vals::Apb2enrTim1en {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Apb2enrTim1en(val as u8)
             }
-            #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"]
-            pub fn set_crslpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) {
+            #[doc = "TIM1 peripheral clock enable"]
+            pub fn set_tim1en(&mut self, val: super::vals::Apb2enrTim1en) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "TIM8 peripheral clock enable"]
+            pub const fn tim8en(&self) -> super::vals::Apb2enrTim1en {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Apb2enrTim1en(val as u8)
+            }
+            #[doc = "TIM8 peripheral clock enable"]
+            pub fn set_tim8en(&mut self, val: super::vals::Apb2enrTim1en) {
                 self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
             }
-            #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn swplpen(&self) -> super::vals::Apb1hlpenrCrslpen {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Apb1hlpenrCrslpen(val as u8)
-            }
-            #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_swplpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "OPAMP peripheral clock enable during CSleep mode"]
-            pub const fn opamplpen(&self) -> super::vals::Apb1hlpenrCrslpen {
+            #[doc = "USART1 Peripheral Clocks Enable"]
+            pub const fn usart1en(&self) -> super::vals::Apb2enrTim1en {
                 let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Apb1hlpenrCrslpen(val as u8)
+                super::vals::Apb2enrTim1en(val as u8)
             }
-            #[doc = "OPAMP peripheral clock enable during CSleep mode"]
-            pub fn set_opamplpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) {
+            #[doc = "USART1 Peripheral Clocks Enable"]
+            pub fn set_usart1en(&mut self, val: super::vals::Apb2enrTim1en) {
                 self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
             }
-            #[doc = "MDIOS peripheral clock enable during CSleep mode"]
-            pub const fn mdioslpen(&self) -> super::vals::Apb1hlpenrCrslpen {
+            #[doc = "USART6 Peripheral Clocks Enable"]
+            pub const fn usart6en(&self) -> super::vals::Apb2enrTim1en {
                 let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Apb1hlpenrCrslpen(val as u8)
+                super::vals::Apb2enrTim1en(val as u8)
             }
-            #[doc = "MDIOS peripheral clock enable during CSleep mode"]
-            pub fn set_mdioslpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) {
+            #[doc = "USART6 Peripheral Clocks Enable"]
+            pub fn set_usart6en(&mut self, val: super::vals::Apb2enrTim1en) {
                 self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
             }
-            #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn fdcanlpen(&self) -> super::vals::Apb1hlpenrCrslpen {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::Apb1hlpenrCrslpen(val as u8)
+            #[doc = "SPI1 Peripheral Clocks Enable"]
+            pub const fn spi1en(&self) -> super::vals::Apb2enrTim1en {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Apb2enrTim1en(val as u8)
             }
-            #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_fdcanlpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            #[doc = "SPI1 Peripheral Clocks Enable"]
+            pub fn set_spi1en(&mut self, val: super::vals::Apb2enrTim1en) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "SPI4 Peripheral Clocks Enable"]
+            pub const fn spi4en(&self) -> super::vals::Apb2enrTim1en {
+                let val = (self.0 >> 13usize) & 0x01;
+                super::vals::Apb2enrTim1en(val as u8)
+            }
+            #[doc = "SPI4 Peripheral Clocks Enable"]
+            pub fn set_spi4en(&mut self, val: super::vals::Apb2enrTim1en) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize);
+            }
+            #[doc = "TIM15 peripheral clock enable"]
+            pub const fn tim15en(&self) -> super::vals::Apb2enrTim1en {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Apb2enrTim1en(val as u8)
+            }
+            #[doc = "TIM15 peripheral clock enable"]
+            pub fn set_tim15en(&mut self, val: super::vals::Apb2enrTim1en) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "TIM16 peripheral clock enable"]
+            pub const fn tim16en(&self) -> super::vals::Apb2enrTim1en {
+                let val = (self.0 >> 17usize) & 0x01;
+                super::vals::Apb2enrTim1en(val as u8)
+            }
+            #[doc = "TIM16 peripheral clock enable"]
+            pub fn set_tim16en(&mut self, val: super::vals::Apb2enrTim1en) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
+            }
+            #[doc = "TIM17 peripheral clock enable"]
+            pub const fn tim17en(&self) -> super::vals::Apb2enrTim1en {
+                let val = (self.0 >> 18usize) & 0x01;
+                super::vals::Apb2enrTim1en(val as u8)
+            }
+            #[doc = "TIM17 peripheral clock enable"]
+            pub fn set_tim17en(&mut self, val: super::vals::Apb2enrTim1en) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
+            }
+            #[doc = "SPI5 Peripheral Clocks Enable"]
+            pub const fn spi5en(&self) -> super::vals::Apb2enrTim1en {
+                let val = (self.0 >> 20usize) & 0x01;
+                super::vals::Apb2enrTim1en(val as u8)
+            }
+            #[doc = "SPI5 Peripheral Clocks Enable"]
+            pub fn set_spi5en(&mut self, val: super::vals::Apb2enrTim1en) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize);
+            }
+            #[doc = "SAI1 Peripheral Clocks Enable"]
+            pub const fn sai1en(&self) -> super::vals::Apb2enrTim1en {
+                let val = (self.0 >> 22usize) & 0x01;
+                super::vals::Apb2enrTim1en(val as u8)
+            }
+            #[doc = "SAI1 Peripheral Clocks Enable"]
+            pub fn set_sai1en(&mut self, val: super::vals::Apb2enrTim1en) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
+            }
+            #[doc = "SAI2 Peripheral Clocks Enable"]
+            pub const fn sai2en(&self) -> super::vals::Apb2enrTim1en {
+                let val = (self.0 >> 23usize) & 0x01;
+                super::vals::Apb2enrTim1en(val as u8)
+            }
+            #[doc = "SAI2 Peripheral Clocks Enable"]
+            pub fn set_sai2en(&mut self, val: super::vals::Apb2enrTim1en) {
+                self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize);
+            }
+            #[doc = "SAI3 Peripheral Clocks Enable"]
+            pub const fn sai3en(&self) -> super::vals::Apb2enrTim1en {
+                let val = (self.0 >> 24usize) & 0x01;
+                super::vals::Apb2enrTim1en(val as u8)
+            }
+            #[doc = "SAI3 Peripheral Clocks Enable"]
+            pub fn set_sai3en(&mut self, val: super::vals::Apb2enrTim1en) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
+            }
+            #[doc = "DFSDM1 Peripheral Clocks Enable"]
+            pub const fn dfsdm1en(&self) -> super::vals::Apb2enrTim1en {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::Apb2enrTim1en(val as u8)
+            }
+            #[doc = "DFSDM1 Peripheral Clocks Enable"]
+            pub fn set_dfsdm1en(&mut self, val: super::vals::Apb2enrTim1en) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
+            }
+            #[doc = "HRTIM peripheral clock enable"]
+            pub const fn hrtimen(&self) -> super::vals::Apb2enrTim1en {
+                let val = (self.0 >> 29usize) & 0x01;
+                super::vals::Apb2enrTim1en(val as u8)
+            }
+            #[doc = "HRTIM peripheral clock enable"]
+            pub fn set_hrtimen(&mut self, val: super::vals::Apb2enrTim1en) {
+                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
             }
         }
-        impl Default for Apb1hlpenr {
-            fn default() -> Apb1hlpenr {
-                Apb1hlpenr(0)
+        impl Default for Apb2enr {
+            fn default() -> Apb2enr {
+                Apb2enr(0)
             }
         }
-        #[doc = "RCC CSI configuration register"]
+        #[doc = "RCC APB4 Peripheral Reset Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Csicfgr(pub u32);
-        impl Csicfgr {
-            #[doc = "CSI clock calibration"]
-            pub const fn csical(&self) -> u16 {
+        pub struct Apb4rstr(pub u32);
+        impl Apb4rstr {
+            #[doc = "SYSCFG block reset"]
+            pub const fn syscfgrst(&self) -> super::vals::Syscfgrst {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Syscfgrst(val as u8)
+            }
+            #[doc = "SYSCFG block reset"]
+            pub fn set_syscfgrst(&mut self, val: super::vals::Syscfgrst) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "LPUART1 block reset"]
+            pub const fn lpuart1rst(&self) -> super::vals::Syscfgrst {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Syscfgrst(val as u8)
+            }
+            #[doc = "LPUART1 block reset"]
+            pub fn set_lpuart1rst(&mut self, val: super::vals::Syscfgrst) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "SPI6 block reset"]
+            pub const fn spi6rst(&self) -> super::vals::Syscfgrst {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Syscfgrst(val as u8)
+            }
+            #[doc = "SPI6 block reset"]
+            pub fn set_spi6rst(&mut self, val: super::vals::Syscfgrst) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "I2C4 block reset"]
+            pub const fn i2c4rst(&self) -> super::vals::Syscfgrst {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Syscfgrst(val as u8)
+            }
+            #[doc = "I2C4 block reset"]
+            pub fn set_i2c4rst(&mut self, val: super::vals::Syscfgrst) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "LPTIM2 block reset"]
+            pub const fn lptim2rst(&self) -> super::vals::Syscfgrst {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Syscfgrst(val as u8)
+            }
+            #[doc = "LPTIM2 block reset"]
+            pub fn set_lptim2rst(&mut self, val: super::vals::Syscfgrst) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "LPTIM3 block reset"]
+            pub const fn lptim3rst(&self) -> super::vals::Syscfgrst {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::Syscfgrst(val as u8)
+            }
+            #[doc = "LPTIM3 block reset"]
+            pub fn set_lptim3rst(&mut self, val: super::vals::Syscfgrst) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "LPTIM4 block reset"]
+            pub const fn lptim4rst(&self) -> super::vals::Syscfgrst {
+                let val = (self.0 >> 11usize) & 0x01;
+                super::vals::Syscfgrst(val as u8)
+            }
+            #[doc = "LPTIM4 block reset"]
+            pub fn set_lptim4rst(&mut self, val: super::vals::Syscfgrst) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
+            }
+            #[doc = "LPTIM5 block reset"]
+            pub const fn lptim5rst(&self) -> super::vals::Syscfgrst {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Syscfgrst(val as u8)
+            }
+            #[doc = "LPTIM5 block reset"]
+            pub fn set_lptim5rst(&mut self, val: super::vals::Syscfgrst) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "COMP12 Blocks Reset"]
+            pub const fn comp12rst(&self) -> super::vals::Syscfgrst {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Syscfgrst(val as u8)
+            }
+            #[doc = "COMP12 Blocks Reset"]
+            pub fn set_comp12rst(&mut self, val: super::vals::Syscfgrst) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "VREF block reset"]
+            pub const fn vrefrst(&self) -> super::vals::Syscfgrst {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Syscfgrst(val as u8)
+            }
+            #[doc = "VREF block reset"]
+            pub fn set_vrefrst(&mut self, val: super::vals::Syscfgrst) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "SAI4 block reset"]
+            pub const fn sai4rst(&self) -> super::vals::Syscfgrst {
+                let val = (self.0 >> 21usize) & 0x01;
+                super::vals::Syscfgrst(val as u8)
+            }
+            #[doc = "SAI4 block reset"]
+            pub fn set_sai4rst(&mut self, val: super::vals::Syscfgrst) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
+            }
+        }
+        impl Default for Apb4rstr {
+            fn default() -> Apb4rstr {
+                Apb4rstr(0)
+            }
+        }
+        #[doc = "RCC AHB1 Sleep Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ahb1lpenr(pub u32);
+        impl Ahb1lpenr {
+            #[doc = "DMA1 Clock Enable During CSleep Mode"]
+            pub const fn dma1lpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "DMA1 Clock Enable During CSleep Mode"]
+            pub fn set_dma1lpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "DMA2 Clock Enable During CSleep Mode"]
+            pub const fn dma2lpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "DMA2 Clock Enable During CSleep Mode"]
+            pub fn set_dma2lpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn adc12lpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_adc12lpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"]
+            pub const fn eth1maclpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"]
+            pub fn set_eth1maclpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"]
+            pub const fn eth1txlpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"]
+            pub fn set_eth1txlpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "Ethernet Reception Clock Enable During CSleep Mode"]
+            pub const fn eth1rxlpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 17usize) & 0x01;
+                super::vals::Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "Ethernet Reception Clock Enable During CSleep Mode"]
+            pub fn set_eth1rxlpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
+            }
+            #[doc = "USB1OTG peripheral clock enable during CSleep mode"]
+            pub const fn usb1otglpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 25usize) & 0x01;
+                super::vals::Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "USB1OTG peripheral clock enable during CSleep mode"]
+            pub fn set_usb1otglpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
+            }
+            #[doc = "USB_PHY1 clock enable during CSleep mode"]
+            pub const fn usb1otghsulpilpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 26usize) & 0x01;
+                super::vals::Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "USB_PHY1 clock enable during CSleep mode"]
+            pub fn set_usb1otghsulpilpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize);
+            }
+            #[doc = "USB2OTG peripheral clock enable during CSleep mode"]
+            pub const fn usb2otglpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 27usize) & 0x01;
+                super::vals::Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "USB2OTG peripheral clock enable during CSleep mode"]
+            pub fn set_usb2otglpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
+            }
+            #[doc = "USB_PHY2 clocks enable during CSleep mode"]
+            pub const fn usb2otghsulpilpen(&self) -> super::vals::Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "USB_PHY2 clocks enable during CSleep mode"]
+            pub fn set_usb2otghsulpilpen(&mut self, val: super::vals::Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
+            }
+        }
+        impl Default for Ahb1lpenr {
+            fn default() -> Ahb1lpenr {
+                Ahb1lpenr(0)
+            }
+        }
+        #[doc = "RCC AHB4 Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct C1Ahb4enr(pub u32);
+        impl C1Ahb4enr {
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpioaen(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpioaen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpioben(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpioben(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpiocen(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpiocen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpioden(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpioden(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpioeen(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpioeen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpiofen(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpiofen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpiogen(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 6usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpiogen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpiohen(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpiohen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpioien(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpioien(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpiojen(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpiojen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpioken(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpioken(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "CRC peripheral clock enable"]
+            pub const fn crcen(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 19usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "CRC peripheral clock enable"]
+            pub fn set_crcen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
+            }
+            #[doc = "BDMA and DMAMUX2 Clock Enable"]
+            pub const fn bdmaen(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 21usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "BDMA and DMAMUX2 Clock Enable"]
+            pub fn set_bdmaen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
+            }
+            #[doc = "ADC3 Peripheral Clocks Enable"]
+            pub const fn adc3en(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 24usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "ADC3 Peripheral Clocks Enable"]
+            pub fn set_adc3en(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
+            }
+            #[doc = "HSEM peripheral clock enable"]
+            pub const fn hsemen(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 25usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "HSEM peripheral clock enable"]
+            pub fn set_hsemen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
+            }
+            #[doc = "Backup RAM Clock Enable"]
+            pub const fn bkpramen(&self) -> super::vals::C1Ahb4enrGpioaen {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::C1Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "Backup RAM Clock Enable"]
+            pub fn set_bkpramen(&mut self, val: super::vals::C1Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
+            }
+        }
+        impl Default for C1Ahb4enr {
+            fn default() -> C1Ahb4enr {
+                C1Ahb4enr(0)
+            }
+        }
+        #[doc = "RCC PLL2 Fractional Divider Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Pll2fracr(pub u32);
+        impl Pll2fracr {
+            #[doc = "Fractional part of the multiplication factor for PLL VCO"]
+            pub const fn fracn2(&self) -> u16 {
+                let val = (self.0 >> 3usize) & 0x1fff;
+                val as u16
+            }
+            #[doc = "Fractional part of the multiplication factor for PLL VCO"]
+            pub fn set_fracn2(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x1fff << 3usize)) | (((val as u32) & 0x1fff) << 3usize);
+            }
+        }
+        impl Default for Pll2fracr {
+            fn default() -> Pll2fracr {
+                Pll2fracr(0)
+            }
+        }
+        #[doc = "RCC Domain 1 Kernel Clock Configuration Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct D1ccipr(pub u32);
+        impl D1ccipr {
+            #[doc = "FMC kernel clock source selection"]
+            pub const fn fmcsel(&self) -> super::vals::Fmcsel {
+                let val = (self.0 >> 0usize) & 0x03;
+                super::vals::Fmcsel(val as u8)
+            }
+            #[doc = "FMC kernel clock source selection"]
+            pub fn set_fmcsel(&mut self, val: super::vals::Fmcsel) {
+                self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize);
+            }
+            #[doc = "QUADSPI kernel clock source selection"]
+            pub const fn qspisel(&self) -> super::vals::Fmcsel {
+                let val = (self.0 >> 4usize) & 0x03;
+                super::vals::Fmcsel(val as u8)
+            }
+            #[doc = "QUADSPI kernel clock source selection"]
+            pub fn set_qspisel(&mut self, val: super::vals::Fmcsel) {
+                self.0 = (self.0 & !(0x03 << 4usize)) | (((val.0 as u32) & 0x03) << 4usize);
+            }
+            #[doc = "SDMMC kernel clock source selection"]
+            pub const fn sdmmcsel(&self) -> super::vals::Sdmmcsel {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Sdmmcsel(val as u8)
+            }
+            #[doc = "SDMMC kernel clock source selection"]
+            pub fn set_sdmmcsel(&mut self, val: super::vals::Sdmmcsel) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "per_ck clock source selection"]
+            pub const fn ckpersel(&self) -> super::vals::Ckpersel {
+                let val = (self.0 >> 28usize) & 0x03;
+                super::vals::Ckpersel(val as u8)
+            }
+            #[doc = "per_ck clock source selection"]
+            pub fn set_ckpersel(&mut self, val: super::vals::Ckpersel) {
+                self.0 = (self.0 & !(0x03 << 28usize)) | (((val.0 as u32) & 0x03) << 28usize);
+            }
+        }
+        impl Default for D1ccipr {
+            fn default() -> D1ccipr {
+                D1ccipr(0)
+            }
+        }
+        #[doc = "RCC APB1 Low Sleep Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Apb1llpenr(pub u32);
+        impl Apb1llpenr {
+            #[doc = "TIM2 peripheral clock enable during CSleep mode"]
+            pub const fn tim2lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "TIM2 peripheral clock enable during CSleep mode"]
+            pub fn set_tim2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "TIM3 peripheral clock enable during CSleep mode"]
+            pub const fn tim3lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "TIM3 peripheral clock enable during CSleep mode"]
+            pub fn set_tim3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "TIM4 peripheral clock enable during CSleep mode"]
+            pub const fn tim4lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "TIM4 peripheral clock enable during CSleep mode"]
+            pub fn set_tim4lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "TIM5 peripheral clock enable during CSleep mode"]
+            pub const fn tim5lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "TIM5 peripheral clock enable during CSleep mode"]
+            pub fn set_tim5lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "TIM6 peripheral clock enable during CSleep mode"]
+            pub const fn tim6lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "TIM6 peripheral clock enable during CSleep mode"]
+            pub fn set_tim6lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "TIM7 peripheral clock enable during CSleep mode"]
+            pub const fn tim7lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "TIM7 peripheral clock enable during CSleep mode"]
+            pub fn set_tim7lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "TIM12 peripheral clock enable during CSleep mode"]
+            pub const fn tim12lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 6usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "TIM12 peripheral clock enable during CSleep mode"]
+            pub fn set_tim12lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            }
+            #[doc = "TIM13 peripheral clock enable during CSleep mode"]
+            pub const fn tim13lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "TIM13 peripheral clock enable during CSleep mode"]
+            pub fn set_tim13lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "TIM14 peripheral clock enable during CSleep mode"]
+            pub const fn tim14lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "TIM14 peripheral clock enable during CSleep mode"]
+            pub fn set_tim14lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+            #[doc = "LPTIM1 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn lptim1lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "LPTIM1 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_lptim1lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "SPI2 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn spi2lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "SPI2 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_spi2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "SPI3 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn spi3lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "SPI3 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_spi3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "SPDIFRX Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn spdifrxlpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "SPDIFRX Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_spdifrxlpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "USART2 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn usart2lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 17usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "USART2 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_usart2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
+            }
+            #[doc = "USART3 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn usart3lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 18usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "USART3 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_usart3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
+            }
+            #[doc = "UART4 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn uart4lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 19usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "UART4 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_uart4lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
+            }
+            #[doc = "UART5 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn uart5lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 20usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "UART5 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_uart5lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize);
+            }
+            #[doc = "I2C1 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn i2c1lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 21usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "I2C1 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_i2c1lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
+            }
+            #[doc = "I2C2 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn i2c2lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 22usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "I2C2 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_i2c2lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
+            }
+            #[doc = "I2C3 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn i2c3lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 23usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "I2C3 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_i2c3lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize);
+            }
+            #[doc = "HDMI-CEC Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn ceclpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 27usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "HDMI-CEC Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_ceclpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
+            }
+            #[doc = "DAC1/2 peripheral clock enable during CSleep mode"]
+            pub const fn dac12lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 29usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "DAC1/2 peripheral clock enable during CSleep mode"]
+            pub fn set_dac12lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
+            }
+            #[doc = "UART7 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn uart7lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 30usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "UART7 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_uart7lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize);
+            }
+            #[doc = "UART8 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn uart8lpen(&self) -> super::vals::Apb1llpenrTim2lpen {
+                let val = (self.0 >> 31usize) & 0x01;
+                super::vals::Apb1llpenrTim2lpen(val as u8)
+            }
+            #[doc = "UART8 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_uart8lpen(&mut self, val: super::vals::Apb1llpenrTim2lpen) {
+                self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
+            }
+        }
+        impl Default for Apb1llpenr {
+            fn default() -> Apb1llpenr {
+                Apb1llpenr(0)
+            }
+        }
+        #[doc = "RCC PLL3 Dividers Configuration Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Pll3divr(pub u32);
+        impl Pll3divr {
+            #[doc = "Multiplication factor for PLL1 VCO"]
+            pub const fn divn3(&self) -> u16 {
                 let val = (self.0 >> 0usize) & 0x01ff;
                 val as u16
             }
-            #[doc = "CSI clock calibration"]
-            pub fn set_csical(&mut self, val: u16) {
+            #[doc = "Multiplication factor for PLL1 VCO"]
+            pub fn set_divn3(&mut self, val: u16) {
                 self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize);
             }
-            #[doc = "CSI clock trimming"]
-            pub const fn csitrim(&self) -> u8 {
-                let val = (self.0 >> 24usize) & 0x3f;
+            #[doc = "PLL DIVP division factor"]
+            pub const fn divp3(&self) -> u8 {
+                let val = (self.0 >> 9usize) & 0x7f;
                 val as u8
             }
-            #[doc = "CSI clock trimming"]
-            pub fn set_csitrim(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x3f << 24usize)) | (((val as u32) & 0x3f) << 24usize);
+            #[doc = "PLL DIVP division factor"]
+            pub fn set_divp3(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x7f << 9usize)) | (((val as u32) & 0x7f) << 9usize);
+            }
+            #[doc = "PLL DIVQ division factor"]
+            pub const fn divq3(&self) -> u8 {
+                let val = (self.0 >> 16usize) & 0x7f;
+                val as u8
+            }
+            #[doc = "PLL DIVQ division factor"]
+            pub fn set_divq3(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x7f << 16usize)) | (((val as u32) & 0x7f) << 16usize);
+            }
+            #[doc = "PLL DIVR division factor"]
+            pub const fn divr3(&self) -> u8 {
+                let val = (self.0 >> 24usize) & 0x7f;
+                val as u8
+            }
+            #[doc = "PLL DIVR division factor"]
+            pub fn set_divr3(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize);
             }
         }
-        impl Default for Csicfgr {
-            fn default() -> Csicfgr {
-                Csicfgr(0)
+        impl Default for Pll3divr {
+            fn default() -> Pll3divr {
+                Pll3divr(0)
+            }
+        }
+        #[doc = "RCC D3 Autonomous mode Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct D3amr(pub u32);
+        impl D3amr {
+            #[doc = "BDMA and DMAMUX Autonomous mode enable"]
+            pub const fn bdmaamen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "BDMA and DMAMUX Autonomous mode enable"]
+            pub fn set_bdmaamen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "LPUART1 Autonomous mode enable"]
+            pub const fn lpuart1amen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "LPUART1 Autonomous mode enable"]
+            pub fn set_lpuart1amen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "SPI6 Autonomous mode enable"]
+            pub const fn spi6amen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "SPI6 Autonomous mode enable"]
+            pub fn set_spi6amen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "I2C4 Autonomous mode enable"]
+            pub const fn i2c4amen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "I2C4 Autonomous mode enable"]
+            pub fn set_i2c4amen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "LPTIM2 Autonomous mode enable"]
+            pub const fn lptim2amen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "LPTIM2 Autonomous mode enable"]
+            pub fn set_lptim2amen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "LPTIM3 Autonomous mode enable"]
+            pub const fn lptim3amen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "LPTIM3 Autonomous mode enable"]
+            pub fn set_lptim3amen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "LPTIM4 Autonomous mode enable"]
+            pub const fn lptim4amen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 11usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "LPTIM4 Autonomous mode enable"]
+            pub fn set_lptim4amen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
+            }
+            #[doc = "LPTIM5 Autonomous mode enable"]
+            pub const fn lptim5amen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "LPTIM5 Autonomous mode enable"]
+            pub fn set_lptim5amen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "COMP12 Autonomous mode enable"]
+            pub const fn comp12amen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "COMP12 Autonomous mode enable"]
+            pub fn set_comp12amen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "VREF Autonomous mode enable"]
+            pub const fn vrefamen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "VREF Autonomous mode enable"]
+            pub fn set_vrefamen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "RTC Autonomous mode enable"]
+            pub const fn rtcamen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "RTC Autonomous mode enable"]
+            pub fn set_rtcamen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "CRC Autonomous mode enable"]
+            pub const fn crcamen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 19usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "CRC Autonomous mode enable"]
+            pub fn set_crcamen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
+            }
+            #[doc = "SAI4 Autonomous mode enable"]
+            pub const fn sai4amen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 21usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "SAI4 Autonomous mode enable"]
+            pub fn set_sai4amen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
+            }
+            #[doc = "ADC3 Autonomous mode enable"]
+            pub const fn adc3amen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 24usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "ADC3 Autonomous mode enable"]
+            pub fn set_adc3amen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
+            }
+            #[doc = "Backup RAM Autonomous mode enable"]
+            pub const fn bkpramamen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "Backup RAM Autonomous mode enable"]
+            pub fn set_bkpramamen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
+            }
+            #[doc = "SRAM4 Autonomous mode enable"]
+            pub const fn sram4amen(&self) -> super::vals::Bdmaamen {
+                let val = (self.0 >> 29usize) & 0x01;
+                super::vals::Bdmaamen(val as u8)
+            }
+            #[doc = "SRAM4 Autonomous mode enable"]
+            pub fn set_sram4amen(&mut self, val: super::vals::Bdmaamen) {
+                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
+            }
+        }
+        impl Default for D3amr {
+            fn default() -> D3amr {
+                D3amr(0)
+            }
+        }
+        #[doc = "RCC AHB3 Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct C1Ahb3enr(pub u32);
+        impl C1Ahb3enr {
+            #[doc = "MDMA Peripheral Clock Enable"]
+            pub const fn mdmaen(&self) -> super::vals::C1Ahb3enrMdmaen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::C1Ahb3enrMdmaen(val as u8)
+            }
+            #[doc = "MDMA Peripheral Clock Enable"]
+            pub fn set_mdmaen(&mut self, val: super::vals::C1Ahb3enrMdmaen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "DMA2D Peripheral Clock Enable"]
+            pub const fn dma2den(&self) -> super::vals::C1Ahb3enrMdmaen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::C1Ahb3enrMdmaen(val as u8)
+            }
+            #[doc = "DMA2D Peripheral Clock Enable"]
+            pub fn set_dma2den(&mut self, val: super::vals::C1Ahb3enrMdmaen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "JPGDEC Peripheral Clock Enable"]
+            pub const fn jpgdecen(&self) -> super::vals::C1Ahb3enrMdmaen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::C1Ahb3enrMdmaen(val as u8)
+            }
+            #[doc = "JPGDEC Peripheral Clock Enable"]
+            pub fn set_jpgdecen(&mut self, val: super::vals::C1Ahb3enrMdmaen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "FMC Peripheral Clocks Enable"]
+            pub const fn fmcen(&self) -> super::vals::C1Ahb3enrMdmaen {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::C1Ahb3enrMdmaen(val as u8)
+            }
+            #[doc = "FMC Peripheral Clocks Enable"]
+            pub fn set_fmcen(&mut self, val: super::vals::C1Ahb3enrMdmaen) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "QUADSPI and QUADSPI Delay Clock Enable"]
+            pub const fn qspien(&self) -> super::vals::C1Ahb3enrMdmaen {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::C1Ahb3enrMdmaen(val as u8)
+            }
+            #[doc = "QUADSPI and QUADSPI Delay Clock Enable"]
+            pub fn set_qspien(&mut self, val: super::vals::C1Ahb3enrMdmaen) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable"]
+            pub const fn sdmmc1en(&self) -> super::vals::C1Ahb3enrMdmaen {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::C1Ahb3enrMdmaen(val as u8)
+            }
+            #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable"]
+            pub fn set_sdmmc1en(&mut self, val: super::vals::C1Ahb3enrMdmaen) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+        }
+        impl Default for C1Ahb3enr {
+            fn default() -> C1Ahb3enr {
+                C1Ahb3enr(0)
+            }
+        }
+        #[doc = "RCC APB1 Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Apb1henr(pub u32);
+        impl Apb1henr {
+            #[doc = "Clock Recovery System peripheral clock enable"]
+            pub const fn crsen(&self) -> super::vals::Apb1henrCrsen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Apb1henrCrsen(val as u8)
+            }
+            #[doc = "Clock Recovery System peripheral clock enable"]
+            pub fn set_crsen(&mut self, val: super::vals::Apb1henrCrsen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "SWPMI Peripheral Clocks Enable"]
+            pub const fn swpen(&self) -> super::vals::Apb1henrCrsen {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Apb1henrCrsen(val as u8)
+            }
+            #[doc = "SWPMI Peripheral Clocks Enable"]
+            pub fn set_swpen(&mut self, val: super::vals::Apb1henrCrsen) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "OPAMP peripheral clock enable"]
+            pub const fn opampen(&self) -> super::vals::Apb1henrCrsen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Apb1henrCrsen(val as u8)
+            }
+            #[doc = "OPAMP peripheral clock enable"]
+            pub fn set_opampen(&mut self, val: super::vals::Apb1henrCrsen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "MDIOS peripheral clock enable"]
+            pub const fn mdiosen(&self) -> super::vals::Apb1henrCrsen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Apb1henrCrsen(val as u8)
+            }
+            #[doc = "MDIOS peripheral clock enable"]
+            pub fn set_mdiosen(&mut self, val: super::vals::Apb1henrCrsen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "FDCAN Peripheral Clocks Enable"]
+            pub const fn fdcanen(&self) -> super::vals::Apb1henrCrsen {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::Apb1henrCrsen(val as u8)
+            }
+            #[doc = "FDCAN Peripheral Clocks Enable"]
+            pub fn set_fdcanen(&mut self, val: super::vals::Apb1henrCrsen) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+        }
+        impl Default for Apb1henr {
+            fn default() -> Apb1henr {
+                Apb1henr(0)
+            }
+        }
+        #[doc = "RCC Clock Control and Status Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Csr(pub u32);
+        impl Csr {
+            #[doc = "LSI oscillator enable"]
+            pub const fn lsion(&self) -> super::vals::Lsion {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Lsion(val as u8)
+            }
+            #[doc = "LSI oscillator enable"]
+            pub fn set_lsion(&mut self, val: super::vals::Lsion) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "LSI oscillator ready"]
+            pub const fn lsirdy(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LSI oscillator ready"]
+            pub fn set_lsirdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+        }
+        impl Default for Csr {
+            fn default() -> Csr {
+                Csr(0)
+            }
+        }
+        #[doc = "RCC AHB3 Sleep Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ahb3lpenr(pub u32);
+        impl Ahb3lpenr {
+            #[doc = "MDMA Clock Enable During CSleep Mode"]
+            pub const fn mdmalpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "MDMA Clock Enable During CSleep Mode"]
+            pub fn set_mdmalpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "DMA2D Clock Enable During CSleep Mode"]
+            pub const fn dma2dlpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "DMA2D Clock Enable During CSleep Mode"]
+            pub fn set_dma2dlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "JPGDEC Clock Enable During CSleep Mode"]
+            pub const fn jpgdeclpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "JPGDEC Clock Enable During CSleep Mode"]
+            pub fn set_jpgdeclpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "FLITF Clock Enable During CSleep Mode"]
+            pub const fn flashlpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "FLITF Clock Enable During CSleep Mode"]
+            pub fn set_flashlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+            #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn fmclpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_fmclpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"]
+            pub const fn qspilpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"]
+            pub fn set_qspilpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"]
+            pub const fn sdmmc1lpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"]
+            pub fn set_sdmmc1lpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"]
+            pub const fn d1dtcm1lpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"]
+            pub fn set_d1dtcm1lpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
+            }
+            #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"]
+            pub const fn dtcm2lpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 29usize) & 0x01;
+                super::vals::Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"]
+            pub fn set_dtcm2lpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
+            }
+            #[doc = "D1ITCM Block Clock Enable During CSleep mode"]
+            pub const fn itcmlpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 30usize) & 0x01;
+                super::vals::Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "D1ITCM Block Clock Enable During CSleep mode"]
+            pub fn set_itcmlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize);
+            }
+            #[doc = "AXISRAM Block Clock Enable During CSleep mode"]
+            pub const fn axisramlpen(&self) -> super::vals::Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 31usize) & 0x01;
+                super::vals::Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "AXISRAM Block Clock Enable During CSleep mode"]
+            pub fn set_axisramlpen(&mut self, val: super::vals::Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
+            }
+        }
+        impl Default for Ahb3lpenr {
+            fn default() -> Ahb3lpenr {
+                Ahb3lpenr(0)
+            }
+        }
+        #[doc = "RCC PLL3 Fractional Divider Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Pll3fracr(pub u32);
+        impl Pll3fracr {
+            #[doc = "Fractional part of the multiplication factor for PLL3 VCO"]
+            pub const fn fracn3(&self) -> u16 {
+                let val = (self.0 >> 3usize) & 0x1fff;
+                val as u16
+            }
+            #[doc = "Fractional part of the multiplication factor for PLL3 VCO"]
+            pub fn set_fracn3(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x1fff << 3usize)) | (((val as u32) & 0x1fff) << 3usize);
+            }
+        }
+        impl Default for Pll3fracr {
+            fn default() -> Pll3fracr {
+                Pll3fracr(0)
+            }
+        }
+        #[doc = "RCC PLL2 Dividers Configuration Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Pll2divr(pub u32);
+        impl Pll2divr {
+            #[doc = "Multiplication factor for PLL1 VCO"]
+            pub const fn divn2(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x01ff;
+                val as u16
+            }
+            #[doc = "Multiplication factor for PLL1 VCO"]
+            pub fn set_divn2(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize);
+            }
+            #[doc = "PLL1 DIVP division factor"]
+            pub const fn divp2(&self) -> u8 {
+                let val = (self.0 >> 9usize) & 0x7f;
+                val as u8
+            }
+            #[doc = "PLL1 DIVP division factor"]
+            pub fn set_divp2(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x7f << 9usize)) | (((val as u32) & 0x7f) << 9usize);
+            }
+            #[doc = "PLL1 DIVQ division factor"]
+            pub const fn divq2(&self) -> u8 {
+                let val = (self.0 >> 16usize) & 0x7f;
+                val as u8
+            }
+            #[doc = "PLL1 DIVQ division factor"]
+            pub fn set_divq2(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x7f << 16usize)) | (((val as u32) & 0x7f) << 16usize);
+            }
+            #[doc = "PLL1 DIVR division factor"]
+            pub const fn divr2(&self) -> u8 {
+                let val = (self.0 >> 24usize) & 0x7f;
+                val as u8
+            }
+            #[doc = "PLL1 DIVR division factor"]
+            pub fn set_divr2(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize);
+            }
+        }
+        impl Default for Pll2divr {
+            fn default() -> Pll2divr {
+                Pll2divr(0)
+            }
+        }
+        #[doc = "RCC AHB4 Sleep Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ahb4lpenr(pub u32);
+        impl Ahb4lpenr {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioalpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioalpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioblpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioblpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioclpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioclpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpiodlpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpiodlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioelpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioelpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioflpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioflpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioglpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 6usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioglpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpiohlpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpiohlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioilpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioilpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpiojlpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpiojlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioklpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioklpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "CRC peripheral clock enable during CSleep mode"]
+            pub const fn crclpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 19usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "CRC peripheral clock enable during CSleep mode"]
+            pub fn set_crclpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
+            }
+            #[doc = "BDMA Clock Enable During CSleep Mode"]
+            pub const fn bdmalpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 21usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "BDMA Clock Enable During CSleep Mode"]
+            pub fn set_bdmalpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
+            }
+            #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn adc3lpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 24usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_adc3lpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
+            }
+            #[doc = "Backup RAM Clock Enable During CSleep Mode"]
+            pub const fn bkpramlpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "Backup RAM Clock Enable During CSleep Mode"]
+            pub fn set_bkpramlpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
+            }
+            #[doc = "SRAM4 Clock Enable During CSleep Mode"]
+            pub const fn sram4lpen(&self) -> super::vals::Ahb4lpenrGpioalpen {
+                let val = (self.0 >> 29usize) & 0x01;
+                super::vals::Ahb4lpenrGpioalpen(val as u8)
+            }
+            #[doc = "SRAM4 Clock Enable During CSleep Mode"]
+            pub fn set_sram4lpen(&mut self, val: super::vals::Ahb4lpenrGpioalpen) {
+                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
+            }
+        }
+        impl Default for Ahb4lpenr {
+            fn default() -> Ahb4lpenr {
+                Ahb4lpenr(0)
+            }
+        }
+        #[doc = "RCC AHB3 Sleep Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct C1Ahb3lpenr(pub u32);
+        impl C1Ahb3lpenr {
+            #[doc = "MDMA Clock Enable During CSleep Mode"]
+            pub const fn mdmalpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "MDMA Clock Enable During CSleep Mode"]
+            pub fn set_mdmalpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "DMA2D Clock Enable During CSleep Mode"]
+            pub const fn dma2dlpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "DMA2D Clock Enable During CSleep Mode"]
+            pub fn set_dma2dlpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "JPGDEC Clock Enable During CSleep Mode"]
+            pub const fn jpgdeclpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "JPGDEC Clock Enable During CSleep Mode"]
+            pub fn set_jpgdeclpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Flash interface clock enable during csleep mode"]
+            pub const fn flashpren(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Flash interface clock enable during csleep mode"]
+            pub fn set_flashpren(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn fmclpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_fmclpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"]
+            pub const fn qspilpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"]
+            pub fn set_qspilpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"]
+            pub const fn sdmmc1lpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"]
+            pub fn set_sdmmc1lpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"]
+            pub const fn d1dtcm1lpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"]
+            pub fn set_d1dtcm1lpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
+            }
+            #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"]
+            pub const fn dtcm2lpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 29usize) & 0x01;
+                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"]
+            pub fn set_dtcm2lpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
+            }
+            #[doc = "D1ITCM Block Clock Enable During CSleep mode"]
+            pub const fn itcmlpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 30usize) & 0x01;
+                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "D1ITCM Block Clock Enable During CSleep mode"]
+            pub fn set_itcmlpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize);
+            }
+            #[doc = "AXISRAM Block Clock Enable During CSleep mode"]
+            pub const fn axisramlpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
+                let val = (self.0 >> 31usize) & 0x01;
+                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
+            }
+            #[doc = "AXISRAM Block Clock Enable During CSleep mode"]
+            pub fn set_axisramlpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
+                self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
+            }
+        }
+        impl Default for C1Ahb3lpenr {
+            fn default() -> C1Ahb3lpenr {
+                C1Ahb3lpenr(0)
+            }
+        }
+        #[doc = "RCC Clock Source Interrupt Enable Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cier(pub u32);
+        impl Cier {
+            #[doc = "LSI ready Interrupt Enable"]
+            pub const fn lsirdyie(&self) -> super::vals::Lsirdyie {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Lsirdyie(val as u8)
+            }
+            #[doc = "LSI ready Interrupt Enable"]
+            pub fn set_lsirdyie(&mut self, val: super::vals::Lsirdyie) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "LSE ready Interrupt Enable"]
+            pub const fn lserdyie(&self) -> super::vals::Lsirdyie {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Lsirdyie(val as u8)
+            }
+            #[doc = "LSE ready Interrupt Enable"]
+            pub fn set_lserdyie(&mut self, val: super::vals::Lsirdyie) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "HSI ready Interrupt Enable"]
+            pub const fn hsirdyie(&self) -> super::vals::Lsirdyie {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Lsirdyie(val as u8)
+            }
+            #[doc = "HSI ready Interrupt Enable"]
+            pub fn set_hsirdyie(&mut self, val: super::vals::Lsirdyie) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "HSE ready Interrupt Enable"]
+            pub const fn hserdyie(&self) -> super::vals::Lsirdyie {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Lsirdyie(val as u8)
+            }
+            #[doc = "HSE ready Interrupt Enable"]
+            pub fn set_hserdyie(&mut self, val: super::vals::Lsirdyie) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "CSI ready Interrupt Enable"]
+            pub const fn csirdyie(&self) -> super::vals::Lsirdyie {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Lsirdyie(val as u8)
+            }
+            #[doc = "CSI ready Interrupt Enable"]
+            pub fn set_csirdyie(&mut self, val: super::vals::Lsirdyie) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "RC48 ready Interrupt Enable"]
+            pub const fn hsi48rdyie(&self) -> super::vals::Lsirdyie {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Lsirdyie(val as u8)
+            }
+            #[doc = "RC48 ready Interrupt Enable"]
+            pub fn set_hsi48rdyie(&mut self, val: super::vals::Lsirdyie) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "PLL1 ready Interrupt Enable"]
+            pub fn pllrdyie(&self, n: usize) -> super::vals::Lsirdyie {
+                assert!(n < 3usize);
+                let offs = 6usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Lsirdyie(val as u8)
+            }
+            #[doc = "PLL1 ready Interrupt Enable"]
+            pub fn set_pllrdyie(&mut self, n: usize, val: super::vals::Lsirdyie) {
+                assert!(n < 3usize);
+                let offs = 6usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+            #[doc = "LSE clock security system Interrupt Enable"]
+            pub const fn lsecssie(&self) -> super::vals::Lsirdyie {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Lsirdyie(val as u8)
+            }
+            #[doc = "LSE clock security system Interrupt Enable"]
+            pub fn set_lsecssie(&mut self, val: super::vals::Lsirdyie) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+        }
+        impl Default for Cier {
+            fn default() -> Cier {
+                Cier(0)
+            }
+        }
+        #[doc = "RCC APB1 High Sleep Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct C1Apb1hlpenr(pub u32);
+        impl C1Apb1hlpenr {
+            #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"]
+            pub const fn crslpen(&self) -> super::vals::C1Apb1hlpenrCrslpen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::C1Apb1hlpenrCrslpen(val as u8)
+            }
+            #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"]
+            pub fn set_crslpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn swplpen(&self) -> super::vals::C1Apb1hlpenrCrslpen {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::C1Apb1hlpenrCrslpen(val as u8)
+            }
+            #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_swplpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "OPAMP peripheral clock enable during CSleep mode"]
+            pub const fn opamplpen(&self) -> super::vals::C1Apb1hlpenrCrslpen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::C1Apb1hlpenrCrslpen(val as u8)
+            }
+            #[doc = "OPAMP peripheral clock enable during CSleep mode"]
+            pub fn set_opamplpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "MDIOS peripheral clock enable during CSleep mode"]
+            pub const fn mdioslpen(&self) -> super::vals::C1Apb1hlpenrCrslpen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::C1Apb1hlpenrCrslpen(val as u8)
+            }
+            #[doc = "MDIOS peripheral clock enable during CSleep mode"]
+            pub fn set_mdioslpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn fdcanlpen(&self) -> super::vals::C1Apb1hlpenrCrslpen {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::C1Apb1hlpenrCrslpen(val as u8)
+            }
+            #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_fdcanlpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+        }
+        impl Default for C1Apb1hlpenr {
+            fn default() -> C1Apb1hlpenr {
+                C1Apb1hlpenr(0)
+            }
+        }
+        #[doc = "RCC APB4 Sleep Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct C1Apb4lpenr(pub u32);
+        impl C1Apb4lpenr {
+            #[doc = "SYSCFG peripheral clock enable during CSleep mode"]
+            pub const fn syscfglpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "SYSCFG peripheral clock enable during CSleep mode"]
+            pub fn set_syscfglpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn lpuart1lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_lpuart1lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn spi6lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_spi6lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn i2c4lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_i2c4lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn lptim2lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_lptim2lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn lptim3lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_lptim3lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn lptim4lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 11usize) & 0x01;
+                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_lptim4lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
+            }
+            #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn lptim5lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_lptim5lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "COMP1/2 peripheral clock enable during CSleep mode"]
+            pub const fn comp12lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "COMP1/2 peripheral clock enable during CSleep mode"]
+            pub fn set_comp12lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "VREF peripheral clock enable during CSleep mode"]
+            pub const fn vreflpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "VREF peripheral clock enable during CSleep mode"]
+            pub fn set_vreflpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "RTC APB Clock Enable During CSleep Mode"]
+            pub const fn rtcapblpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "RTC APB Clock Enable During CSleep Mode"]
+            pub fn set_rtcapblpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn sai4lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 21usize) & 0x01;
+                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_sai4lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
+            }
+        }
+        impl Default for C1Apb4lpenr {
+            fn default() -> C1Apb4lpenr {
+                C1Apb4lpenr(0)
+            }
+        }
+        #[doc = "RCC AHB1 Peripheral Reset Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ahb1rstr(pub u32);
+        impl Ahb1rstr {
+            #[doc = "DMA1 block reset"]
+            pub const fn dma1rst(&self) -> super::vals::Dma1rst {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Dma1rst(val as u8)
+            }
+            #[doc = "DMA1 block reset"]
+            pub fn set_dma1rst(&mut self, val: super::vals::Dma1rst) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "DMA2 block reset"]
+            pub const fn dma2rst(&self) -> super::vals::Dma1rst {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Dma1rst(val as u8)
+            }
+            #[doc = "DMA2 block reset"]
+            pub fn set_dma2rst(&mut self, val: super::vals::Dma1rst) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "ADC1&2 block reset"]
+            pub const fn adc12rst(&self) -> super::vals::Dma1rst {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Dma1rst(val as u8)
+            }
+            #[doc = "ADC1&2 block reset"]
+            pub fn set_adc12rst(&mut self, val: super::vals::Dma1rst) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "ETH1MAC block reset"]
+            pub const fn eth1macrst(&self) -> super::vals::Dma1rst {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Dma1rst(val as u8)
+            }
+            #[doc = "ETH1MAC block reset"]
+            pub fn set_eth1macrst(&mut self, val: super::vals::Dma1rst) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "USB1OTG block reset"]
+            pub const fn usb1otgrst(&self) -> super::vals::Dma1rst {
+                let val = (self.0 >> 25usize) & 0x01;
+                super::vals::Dma1rst(val as u8)
+            }
+            #[doc = "USB1OTG block reset"]
+            pub fn set_usb1otgrst(&mut self, val: super::vals::Dma1rst) {
+                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
+            }
+            #[doc = "USB2OTG block reset"]
+            pub const fn usb2otgrst(&self) -> super::vals::Dma1rst {
+                let val = (self.0 >> 27usize) & 0x01;
+                super::vals::Dma1rst(val as u8)
+            }
+            #[doc = "USB2OTG block reset"]
+            pub fn set_usb2otgrst(&mut self, val: super::vals::Dma1rst) {
+                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
+            }
+        }
+        impl Default for Ahb1rstr {
+            fn default() -> Ahb1rstr {
+                Ahb1rstr(0)
+            }
+        }
+        #[doc = "RCC APB1 Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct C1Apb1henr(pub u32);
+        impl C1Apb1henr {
+            #[doc = "Clock Recovery System peripheral clock enable"]
+            pub const fn crsen(&self) -> super::vals::C1Apb1henrCrsen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::C1Apb1henrCrsen(val as u8)
+            }
+            #[doc = "Clock Recovery System peripheral clock enable"]
+            pub fn set_crsen(&mut self, val: super::vals::C1Apb1henrCrsen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "SWPMI Peripheral Clocks Enable"]
+            pub const fn swpen(&self) -> super::vals::C1Apb1henrCrsen {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::C1Apb1henrCrsen(val as u8)
+            }
+            #[doc = "SWPMI Peripheral Clocks Enable"]
+            pub fn set_swpen(&mut self, val: super::vals::C1Apb1henrCrsen) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "OPAMP peripheral clock enable"]
+            pub const fn opampen(&self) -> super::vals::C1Apb1henrCrsen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::C1Apb1henrCrsen(val as u8)
+            }
+            #[doc = "OPAMP peripheral clock enable"]
+            pub fn set_opampen(&mut self, val: super::vals::C1Apb1henrCrsen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "MDIOS peripheral clock enable"]
+            pub const fn mdiosen(&self) -> super::vals::C1Apb1henrCrsen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::C1Apb1henrCrsen(val as u8)
+            }
+            #[doc = "MDIOS peripheral clock enable"]
+            pub fn set_mdiosen(&mut self, val: super::vals::C1Apb1henrCrsen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "FDCAN Peripheral Clocks Enable"]
+            pub const fn fdcanen(&self) -> super::vals::C1Apb1henrCrsen {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::C1Apb1henrCrsen(val as u8)
+            }
+            #[doc = "FDCAN Peripheral Clocks Enable"]
+            pub fn set_fdcanen(&mut self, val: super::vals::C1Apb1henrCrsen) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+        }
+        impl Default for C1Apb1henr {
+            fn default() -> C1Apb1henr {
+                C1Apb1henr(0)
             }
         }
         #[doc = "RCC AHB2 Sleep Clock Register"]
@@ -7837,907 +7081,405 @@ pub mod rcc_h7 {
                 C1Ahb2lpenr(0)
             }
         }
-        #[doc = "RCC APB3 Sleep Clock Register"]
+        #[doc = "RCC PLLs Configuration Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb3lpenr(pub u32);
-        impl Apb3lpenr {
-            #[doc = "LTDC peripheral clock enable during CSleep mode"]
-            pub const fn ltdclpen(&self) -> super::vals::Apb3lpenrLtdclpen {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Apb3lpenrLtdclpen(val as u8)
-            }
-            #[doc = "LTDC peripheral clock enable during CSleep mode"]
-            pub fn set_ltdclpen(&mut self, val: super::vals::Apb3lpenrLtdclpen) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "WWDG1 Clock Enable During CSleep Mode"]
-            pub const fn wwdg1lpen(&self) -> super::vals::Apb3lpenrLtdclpen {
-                let val = (self.0 >> 6usize) & 0x01;
-                super::vals::Apb3lpenrLtdclpen(val as u8)
-            }
-            #[doc = "WWDG1 Clock Enable During CSleep Mode"]
-            pub fn set_wwdg1lpen(&mut self, val: super::vals::Apb3lpenrLtdclpen) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
-            }
-        }
-        impl Default for Apb3lpenr {
-            fn default() -> Apb3lpenr {
-                Apb3lpenr(0)
-            }
-        }
-        #[doc = "RCC AHB3 Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ahb3enr(pub u32);
-        impl Ahb3enr {
-            #[doc = "MDMA Peripheral Clock Enable"]
-            pub const fn mdmaen(&self) -> super::vals::Ahb3enrMdmaen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Ahb3enrMdmaen(val as u8)
-            }
-            #[doc = "MDMA Peripheral Clock Enable"]
-            pub fn set_mdmaen(&mut self, val: super::vals::Ahb3enrMdmaen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "DMA2D Peripheral Clock Enable"]
-            pub const fn dma2den(&self) -> super::vals::Ahb3enrMdmaen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Ahb3enrMdmaen(val as u8)
-            }
-            #[doc = "DMA2D Peripheral Clock Enable"]
-            pub fn set_dma2den(&mut self, val: super::vals::Ahb3enrMdmaen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "JPGDEC Peripheral Clock Enable"]
-            pub const fn jpgdecen(&self) -> super::vals::Ahb3enrMdmaen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Ahb3enrMdmaen(val as u8)
-            }
-            #[doc = "JPGDEC Peripheral Clock Enable"]
-            pub fn set_jpgdecen(&mut self, val: super::vals::Ahb3enrMdmaen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "FMC Peripheral Clocks Enable"]
-            pub const fn fmcen(&self) -> super::vals::Ahb3enrMdmaen {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Ahb3enrMdmaen(val as u8)
-            }
-            #[doc = "FMC Peripheral Clocks Enable"]
-            pub fn set_fmcen(&mut self, val: super::vals::Ahb3enrMdmaen) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "QUADSPI and QUADSPI Delay Clock Enable"]
-            pub const fn qspien(&self) -> super::vals::Ahb3enrMdmaen {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Ahb3enrMdmaen(val as u8)
-            }
-            #[doc = "QUADSPI and QUADSPI Delay Clock Enable"]
-            pub fn set_qspien(&mut self, val: super::vals::Ahb3enrMdmaen) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable"]
-            pub const fn sdmmc1en(&self) -> super::vals::Ahb3enrMdmaen {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Ahb3enrMdmaen(val as u8)
-            }
-            #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable"]
-            pub fn set_sdmmc1en(&mut self, val: super::vals::Ahb3enrMdmaen) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-        }
-        impl Default for Ahb3enr {
-            fn default() -> Ahb3enr {
-                Ahb3enr(0)
-            }
-        }
-        #[doc = "RCC Domain 1 Kernel Clock Configuration Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct D1ccipr(pub u32);
-        impl D1ccipr {
-            #[doc = "FMC kernel clock source selection"]
-            pub const fn fmcsel(&self) -> super::vals::Fmcsel {
-                let val = (self.0 >> 0usize) & 0x03;
-                super::vals::Fmcsel(val as u8)
-            }
-            #[doc = "FMC kernel clock source selection"]
-            pub fn set_fmcsel(&mut self, val: super::vals::Fmcsel) {
-                self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize);
-            }
-            #[doc = "QUADSPI kernel clock source selection"]
-            pub const fn qspisel(&self) -> super::vals::Fmcsel {
-                let val = (self.0 >> 4usize) & 0x03;
-                super::vals::Fmcsel(val as u8)
-            }
-            #[doc = "QUADSPI kernel clock source selection"]
-            pub fn set_qspisel(&mut self, val: super::vals::Fmcsel) {
-                self.0 = (self.0 & !(0x03 << 4usize)) | (((val.0 as u32) & 0x03) << 4usize);
-            }
-            #[doc = "SDMMC kernel clock source selection"]
-            pub const fn sdmmcsel(&self) -> super::vals::Sdmmcsel {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Sdmmcsel(val as u8)
-            }
-            #[doc = "SDMMC kernel clock source selection"]
-            pub fn set_sdmmcsel(&mut self, val: super::vals::Sdmmcsel) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "per_ck clock source selection"]
-            pub const fn ckpersel(&self) -> super::vals::Ckpersel {
-                let val = (self.0 >> 28usize) & 0x03;
-                super::vals::Ckpersel(val as u8)
-            }
-            #[doc = "per_ck clock source selection"]
-            pub fn set_ckpersel(&mut self, val: super::vals::Ckpersel) {
-                self.0 = (self.0 & !(0x03 << 28usize)) | (((val.0 as u32) & 0x03) << 28usize);
-            }
-        }
-        impl Default for D1ccipr {
-            fn default() -> D1ccipr {
-                D1ccipr(0)
-            }
-        }
-        #[doc = "RCC PLL2 Fractional Divider Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Pll2fracr(pub u32);
-        impl Pll2fracr {
-            #[doc = "Fractional part of the multiplication factor for PLL VCO"]
-            pub const fn fracn2(&self) -> u16 {
-                let val = (self.0 >> 3usize) & 0x1fff;
-                val as u16
-            }
-            #[doc = "Fractional part of the multiplication factor for PLL VCO"]
-            pub fn set_fracn2(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x1fff << 3usize)) | (((val as u32) & 0x1fff) << 3usize);
-            }
-        }
-        impl Default for Pll2fracr {
-            fn default() -> Pll2fracr {
-                Pll2fracr(0)
-            }
-        }
-        #[doc = "RCC PLL1 Dividers Configuration Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Pll1divr(pub u32);
-        impl Pll1divr {
-            #[doc = "Multiplication factor for PLL1 VCO"]
-            pub const fn divn1(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x01ff;
-                val as u16
-            }
-            #[doc = "Multiplication factor for PLL1 VCO"]
-            pub fn set_divn1(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize);
-            }
-            #[doc = "PLL1 DIVP division factor"]
-            pub const fn divp1(&self) -> super::vals::Divp1 {
-                let val = (self.0 >> 9usize) & 0x7f;
-                super::vals::Divp1(val as u8)
-            }
-            #[doc = "PLL1 DIVP division factor"]
-            pub fn set_divp1(&mut self, val: super::vals::Divp1) {
-                self.0 = (self.0 & !(0x7f << 9usize)) | (((val.0 as u32) & 0x7f) << 9usize);
-            }
-            #[doc = "PLL1 DIVQ division factor"]
-            pub const fn divq1(&self) -> u8 {
-                let val = (self.0 >> 16usize) & 0x7f;
-                val as u8
-            }
-            #[doc = "PLL1 DIVQ division factor"]
-            pub fn set_divq1(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x7f << 16usize)) | (((val as u32) & 0x7f) << 16usize);
-            }
-            #[doc = "PLL1 DIVR division factor"]
-            pub const fn divr1(&self) -> u8 {
-                let val = (self.0 >> 24usize) & 0x7f;
-                val as u8
-            }
-            #[doc = "PLL1 DIVR division factor"]
-            pub fn set_divr1(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize);
-            }
-        }
-        impl Default for Pll1divr {
-            fn default() -> Pll1divr {
-                Pll1divr(0)
-            }
-        }
-        #[doc = "RCC PLL1 Fractional Divider Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Pll1fracr(pub u32);
-        impl Pll1fracr {
-            #[doc = "Fractional part of the multiplication factor for PLL1 VCO"]
-            pub const fn fracn1(&self) -> u16 {
-                let val = (self.0 >> 3usize) & 0x1fff;
-                val as u16
-            }
-            #[doc = "Fractional part of the multiplication factor for PLL1 VCO"]
-            pub fn set_fracn1(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x1fff << 3usize)) | (((val as u32) & 0x1fff) << 3usize);
-            }
-        }
-        impl Default for Pll1fracr {
-            fn default() -> Pll1fracr {
-                Pll1fracr(0)
-            }
-        }
-        #[doc = "RCC Clock Source Interrupt Flag Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cifr(pub u32);
-        impl Cifr {
-            #[doc = "LSI ready Interrupt Flag"]
-            pub const fn lsirdyf(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LSI ready Interrupt Flag"]
-            pub fn set_lsirdyf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "LSE ready Interrupt Flag"]
-            pub const fn lserdyf(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LSE ready Interrupt Flag"]
-            pub fn set_lserdyf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "HSI ready Interrupt Flag"]
-            pub const fn hsirdyf(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "HSI ready Interrupt Flag"]
-            pub fn set_hsirdyf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "HSE ready Interrupt Flag"]
-            pub const fn hserdyf(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "HSE ready Interrupt Flag"]
-            pub fn set_hserdyf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "CSI ready Interrupt Flag"]
-            pub const fn csirdy(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CSI ready Interrupt Flag"]
-            pub fn set_csirdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "RC48 ready Interrupt Flag"]
-            pub const fn hsi48rdyf(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "RC48 ready Interrupt Flag"]
-            pub fn set_hsi48rdyf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "PLL1 ready Interrupt Flag"]
-            pub fn pllrdyf(&self, n: usize) -> bool {
+        pub struct Pllcfgr(pub u32);
+        impl Pllcfgr {
+            #[doc = "PLL1 fractional latch enable"]
+            pub fn pllfracen(&self, n: usize) -> super::vals::Pll1fracen {
                 assert!(n < 3usize);
-                let offs = 6usize + n * 1usize;
+                let offs = 0usize + n * 4usize;
                 let val = (self.0 >> offs) & 0x01;
-                val != 0
+                super::vals::Pll1fracen(val as u8)
             }
-            #[doc = "PLL1 ready Interrupt Flag"]
-            pub fn set_pllrdyf(&mut self, n: usize, val: bool) {
+            #[doc = "PLL1 fractional latch enable"]
+            pub fn set_pllfracen(&mut self, n: usize, val: super::vals::Pll1fracen) {
                 assert!(n < 3usize);
-                let offs = 6usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+                let offs = 0usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
             }
-            #[doc = "LSE clock security system Interrupt Flag"]
-            pub const fn lsecssf(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
+            #[doc = "PLL1 VCO selection"]
+            pub fn pllvcosel(&self, n: usize) -> super::vals::Pll1vcosel {
+                assert!(n < 3usize);
+                let offs = 1usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Pll1vcosel(val as u8)
             }
-            #[doc = "LSE clock security system Interrupt Flag"]
-            pub fn set_lsecssf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            #[doc = "PLL1 VCO selection"]
+            pub fn set_pllvcosel(&mut self, n: usize, val: super::vals::Pll1vcosel) {
+                assert!(n < 3usize);
+                let offs = 1usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
             }
-            #[doc = "HSE clock security system Interrupt Flag"]
-            pub const fn hsecssf(&self) -> bool {
-                let val = (self.0 >> 10usize) & 0x01;
-                val != 0
+            #[doc = "PLL1 input frequency range"]
+            pub fn pllrge(&self, n: usize) -> super::vals::Pll1rge {
+                assert!(n < 3usize);
+                let offs = 2usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x03;
+                super::vals::Pll1rge(val as u8)
             }
-            #[doc = "HSE clock security system Interrupt Flag"]
-            pub fn set_hsecssf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            #[doc = "PLL1 input frequency range"]
+            pub fn set_pllrge(&mut self, n: usize, val: super::vals::Pll1rge) {
+                assert!(n < 3usize);
+                let offs = 2usize + n * 4usize;
+                self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs);
+            }
+            #[doc = "PLL1 DIVP divider output enable"]
+            pub fn divpen(&self, n: usize) -> super::vals::Divp1en {
+                assert!(n < 3usize);
+                let offs = 16usize + n * 3usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Divp1en(val as u8)
+            }
+            #[doc = "PLL1 DIVP divider output enable"]
+            pub fn set_divpen(&mut self, n: usize, val: super::vals::Divp1en) {
+                assert!(n < 3usize);
+                let offs = 16usize + n * 3usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+            #[doc = "PLL1 DIVQ divider output enable"]
+            pub fn divqen(&self, n: usize) -> super::vals::Divp1en {
+                assert!(n < 3usize);
+                let offs = 17usize + n * 3usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Divp1en(val as u8)
+            }
+            #[doc = "PLL1 DIVQ divider output enable"]
+            pub fn set_divqen(&mut self, n: usize, val: super::vals::Divp1en) {
+                assert!(n < 3usize);
+                let offs = 17usize + n * 3usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+            #[doc = "PLL1 DIVR divider output enable"]
+            pub fn divren(&self, n: usize) -> super::vals::Divp1en {
+                assert!(n < 3usize);
+                let offs = 18usize + n * 3usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Divp1en(val as u8)
+            }
+            #[doc = "PLL1 DIVR divider output enable"]
+            pub fn set_divren(&mut self, n: usize, val: super::vals::Divp1en) {
+                assert!(n < 3usize);
+                let offs = 18usize + n * 3usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
             }
         }
-        impl Default for Cifr {
-            fn default() -> Cifr {
-                Cifr(0)
+        impl Default for Pllcfgr {
+            fn default() -> Pllcfgr {
+                Pllcfgr(0)
             }
         }
-        #[doc = "RCC AHB4 Peripheral Reset Register"]
+        #[doc = "RCC AHB4 Sleep Clock Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ahb4rstr(pub u32);
-        impl Ahb4rstr {
-            #[doc = "GPIO block reset"]
-            pub const fn gpioarst(&self) -> super::vals::Gpioarst {
+        pub struct C1Ahb4lpenr(pub u32);
+        impl C1Ahb4lpenr {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioalpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Gpioarst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "GPIO block reset"]
-            pub fn set_gpioarst(&mut self, val: super::vals::Gpioarst) {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioalpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
             }
-            #[doc = "GPIO block reset"]
-            pub const fn gpiobrst(&self) -> super::vals::Gpioarst {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioblpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Gpioarst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "GPIO block reset"]
-            pub fn set_gpiobrst(&mut self, val: super::vals::Gpioarst) {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioblpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
             }
-            #[doc = "GPIO block reset"]
-            pub const fn gpiocrst(&self) -> super::vals::Gpioarst {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioclpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Gpioarst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "GPIO block reset"]
-            pub fn set_gpiocrst(&mut self, val: super::vals::Gpioarst) {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioclpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
             }
-            #[doc = "GPIO block reset"]
-            pub const fn gpiodrst(&self) -> super::vals::Gpioarst {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpiodlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Gpioarst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "GPIO block reset"]
-            pub fn set_gpiodrst(&mut self, val: super::vals::Gpioarst) {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpiodlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
             }
-            #[doc = "GPIO block reset"]
-            pub const fn gpioerst(&self) -> super::vals::Gpioarst {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioelpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Gpioarst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "GPIO block reset"]
-            pub fn set_gpioerst(&mut self, val: super::vals::Gpioarst) {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioelpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
             }
-            #[doc = "GPIO block reset"]
-            pub const fn gpiofrst(&self) -> super::vals::Gpioarst {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioflpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Gpioarst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "GPIO block reset"]
-            pub fn set_gpiofrst(&mut self, val: super::vals::Gpioarst) {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioflpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
             }
-            #[doc = "GPIO block reset"]
-            pub const fn gpiogrst(&self) -> super::vals::Gpioarst {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioglpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 6usize) & 0x01;
-                super::vals::Gpioarst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "GPIO block reset"]
-            pub fn set_gpiogrst(&mut self, val: super::vals::Gpioarst) {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioglpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
             }
-            #[doc = "GPIO block reset"]
-            pub const fn gpiohrst(&self) -> super::vals::Gpioarst {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpiohlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Gpioarst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "GPIO block reset"]
-            pub fn set_gpiohrst(&mut self, val: super::vals::Gpioarst) {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpiohlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
             }
-            #[doc = "GPIO block reset"]
-            pub const fn gpioirst(&self) -> super::vals::Gpioarst {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioilpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 8usize) & 0x01;
-                super::vals::Gpioarst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "GPIO block reset"]
-            pub fn set_gpioirst(&mut self, val: super::vals::Gpioarst) {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioilpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
             }
-            #[doc = "GPIO block reset"]
-            pub const fn gpiojrst(&self) -> super::vals::Gpioarst {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpiojlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Gpioarst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "GPIO block reset"]
-            pub fn set_gpiojrst(&mut self, val: super::vals::Gpioarst) {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpiojlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
             }
-            #[doc = "GPIO block reset"]
-            pub const fn gpiokrst(&self) -> super::vals::Gpioarst {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub const fn gpioklpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Gpioarst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "GPIO block reset"]
-            pub fn set_gpiokrst(&mut self, val: super::vals::Gpioarst) {
+            #[doc = "GPIO peripheral clock enable during CSleep mode"]
+            pub fn set_gpioklpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
             }
-            #[doc = "CRC block reset"]
-            pub const fn crcrst(&self) -> super::vals::Gpioarst {
+            #[doc = "CRC peripheral clock enable during CSleep mode"]
+            pub const fn crclpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 19usize) & 0x01;
-                super::vals::Gpioarst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "CRC block reset"]
-            pub fn set_crcrst(&mut self, val: super::vals::Gpioarst) {
+            #[doc = "CRC peripheral clock enable during CSleep mode"]
+            pub fn set_crclpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
             }
-            #[doc = "BDMA block reset"]
-            pub const fn bdmarst(&self) -> super::vals::Gpioarst {
+            #[doc = "BDMA Clock Enable During CSleep Mode"]
+            pub const fn bdmalpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 21usize) & 0x01;
-                super::vals::Gpioarst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "BDMA block reset"]
-            pub fn set_bdmarst(&mut self, val: super::vals::Gpioarst) {
+            #[doc = "BDMA Clock Enable During CSleep Mode"]
+            pub fn set_bdmalpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
             }
-            #[doc = "ADC3 block reset"]
-            pub const fn adc3rst(&self) -> super::vals::Gpioarst {
+            #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn adc3lpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 24usize) & 0x01;
-                super::vals::Gpioarst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "ADC3 block reset"]
-            pub fn set_adc3rst(&mut self, val: super::vals::Gpioarst) {
+            #[doc = "ADC3 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_adc3lpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
             }
-            #[doc = "HSEM block reset"]
-            pub const fn hsemrst(&self) -> super::vals::Gpioarst {
-                let val = (self.0 >> 25usize) & 0x01;
-                super::vals::Gpioarst(val as u8)
-            }
-            #[doc = "HSEM block reset"]
-            pub fn set_hsemrst(&mut self, val: super::vals::Gpioarst) {
-                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
-            }
-        }
-        impl Default for Ahb4rstr {
-            fn default() -> Ahb4rstr {
-                Ahb4rstr(0)
-            }
-        }
-        #[doc = "RCC APB1 High Sleep Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct C1Apb1hlpenr(pub u32);
-        impl C1Apb1hlpenr {
-            #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"]
-            pub const fn crslpen(&self) -> super::vals::C1Apb1hlpenrCrslpen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::C1Apb1hlpenrCrslpen(val as u8)
-            }
-            #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"]
-            pub fn set_crslpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn swplpen(&self) -> super::vals::C1Apb1hlpenrCrslpen {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::C1Apb1hlpenrCrslpen(val as u8)
-            }
-            #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_swplpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "OPAMP peripheral clock enable during CSleep mode"]
-            pub const fn opamplpen(&self) -> super::vals::C1Apb1hlpenrCrslpen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::C1Apb1hlpenrCrslpen(val as u8)
-            }
-            #[doc = "OPAMP peripheral clock enable during CSleep mode"]
-            pub fn set_opamplpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "MDIOS peripheral clock enable during CSleep mode"]
-            pub const fn mdioslpen(&self) -> super::vals::C1Apb1hlpenrCrslpen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::C1Apb1hlpenrCrslpen(val as u8)
-            }
-            #[doc = "MDIOS peripheral clock enable during CSleep mode"]
-            pub fn set_mdioslpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn fdcanlpen(&self) -> super::vals::C1Apb1hlpenrCrslpen {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::C1Apb1hlpenrCrslpen(val as u8)
-            }
-            #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_fdcanlpen(&mut self, val: super::vals::C1Apb1hlpenrCrslpen) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
-            }
-        }
-        impl Default for C1Apb1hlpenr {
-            fn default() -> C1Apb1hlpenr {
-                C1Apb1hlpenr(0)
-            }
-        }
-        #[doc = "RCC APB2 Peripheral Reset Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb2rstr(pub u32);
-        impl Apb2rstr {
-            #[doc = "TIM1 block reset"]
-            pub const fn tim1rst(&self) -> super::vals::Tim1rst {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Tim1rst(val as u8)
-            }
-            #[doc = "TIM1 block reset"]
-            pub fn set_tim1rst(&mut self, val: super::vals::Tim1rst) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "TIM8 block reset"]
-            pub const fn tim8rst(&self) -> super::vals::Tim1rst {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Tim1rst(val as u8)
-            }
-            #[doc = "TIM8 block reset"]
-            pub fn set_tim8rst(&mut self, val: super::vals::Tim1rst) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "USART1 block reset"]
-            pub const fn usart1rst(&self) -> super::vals::Tim1rst {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Tim1rst(val as u8)
-            }
-            #[doc = "USART1 block reset"]
-            pub fn set_usart1rst(&mut self, val: super::vals::Tim1rst) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "USART6 block reset"]
-            pub const fn usart6rst(&self) -> super::vals::Tim1rst {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Tim1rst(val as u8)
-            }
-            #[doc = "USART6 block reset"]
-            pub fn set_usart6rst(&mut self, val: super::vals::Tim1rst) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "SPI1 block reset"]
-            pub const fn spi1rst(&self) -> super::vals::Tim1rst {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Tim1rst(val as u8)
-            }
-            #[doc = "SPI1 block reset"]
-            pub fn set_spi1rst(&mut self, val: super::vals::Tim1rst) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "SPI4 block reset"]
-            pub const fn spi4rst(&self) -> super::vals::Tim1rst {
-                let val = (self.0 >> 13usize) & 0x01;
-                super::vals::Tim1rst(val as u8)
-            }
-            #[doc = "SPI4 block reset"]
-            pub fn set_spi4rst(&mut self, val: super::vals::Tim1rst) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize);
-            }
-            #[doc = "TIM15 block reset"]
-            pub const fn tim15rst(&self) -> super::vals::Tim1rst {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Tim1rst(val as u8)
-            }
-            #[doc = "TIM15 block reset"]
-            pub fn set_tim15rst(&mut self, val: super::vals::Tim1rst) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "TIM16 block reset"]
-            pub const fn tim16rst(&self) -> super::vals::Tim1rst {
-                let val = (self.0 >> 17usize) & 0x01;
-                super::vals::Tim1rst(val as u8)
-            }
-            #[doc = "TIM16 block reset"]
-            pub fn set_tim16rst(&mut self, val: super::vals::Tim1rst) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
-            }
-            #[doc = "TIM17 block reset"]
-            pub const fn tim17rst(&self) -> super::vals::Tim1rst {
-                let val = (self.0 >> 18usize) & 0x01;
-                super::vals::Tim1rst(val as u8)
-            }
-            #[doc = "TIM17 block reset"]
-            pub fn set_tim17rst(&mut self, val: super::vals::Tim1rst) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
-            }
-            #[doc = "SPI5 block reset"]
-            pub const fn spi5rst(&self) -> super::vals::Tim1rst {
-                let val = (self.0 >> 20usize) & 0x01;
-                super::vals::Tim1rst(val as u8)
-            }
-            #[doc = "SPI5 block reset"]
-            pub fn set_spi5rst(&mut self, val: super::vals::Tim1rst) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize);
-            }
-            #[doc = "SAI1 block reset"]
-            pub const fn sai1rst(&self) -> super::vals::Tim1rst {
-                let val = (self.0 >> 22usize) & 0x01;
-                super::vals::Tim1rst(val as u8)
-            }
-            #[doc = "SAI1 block reset"]
-            pub fn set_sai1rst(&mut self, val: super::vals::Tim1rst) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
-            }
-            #[doc = "SAI2 block reset"]
-            pub const fn sai2rst(&self) -> super::vals::Tim1rst {
-                let val = (self.0 >> 23usize) & 0x01;
-                super::vals::Tim1rst(val as u8)
-            }
-            #[doc = "SAI2 block reset"]
-            pub fn set_sai2rst(&mut self, val: super::vals::Tim1rst) {
-                self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize);
-            }
-            #[doc = "SAI3 block reset"]
-            pub const fn sai3rst(&self) -> super::vals::Tim1rst {
-                let val = (self.0 >> 24usize) & 0x01;
-                super::vals::Tim1rst(val as u8)
-            }
-            #[doc = "SAI3 block reset"]
-            pub fn set_sai3rst(&mut self, val: super::vals::Tim1rst) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
-            }
-            #[doc = "DFSDM1 block reset"]
-            pub const fn dfsdm1rst(&self) -> super::vals::Tim1rst {
+            #[doc = "Backup RAM Clock Enable During CSleep Mode"]
+            pub const fn bkpramlpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 28usize) & 0x01;
-                super::vals::Tim1rst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "DFSDM1 block reset"]
-            pub fn set_dfsdm1rst(&mut self, val: super::vals::Tim1rst) {
+            #[doc = "Backup RAM Clock Enable During CSleep Mode"]
+            pub fn set_bkpramlpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
             }
-            #[doc = "HRTIM block reset"]
-            pub const fn hrtimrst(&self) -> super::vals::Tim1rst {
+            #[doc = "SRAM4 Clock Enable During CSleep Mode"]
+            pub const fn sram4lpen(&self) -> super::vals::C1Ahb4lpenrGpioalpen {
                 let val = (self.0 >> 29usize) & 0x01;
-                super::vals::Tim1rst(val as u8)
+                super::vals::C1Ahb4lpenrGpioalpen(val as u8)
             }
-            #[doc = "HRTIM block reset"]
-            pub fn set_hrtimrst(&mut self, val: super::vals::Tim1rst) {
+            #[doc = "SRAM4 Clock Enable During CSleep Mode"]
+            pub fn set_sram4lpen(&mut self, val: super::vals::C1Ahb4lpenrGpioalpen) {
                 self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
             }
         }
-        impl Default for Apb2rstr {
-            fn default() -> Apb2rstr {
-                Apb2rstr(0)
+        impl Default for C1Ahb4lpenr {
+            fn default() -> C1Ahb4lpenr {
+                C1Ahb4lpenr(0)
             }
         }
-        #[doc = "RCC APB4 Clock Register"]
+        #[doc = "RCC AHB3 Reset Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct C1Apb4enr(pub u32);
-        impl C1Apb4enr {
-            #[doc = "SYSCFG peripheral clock enable"]
-            pub const fn syscfgen(&self) -> super::vals::C1Apb4enrSyscfgen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::C1Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "SYSCFG peripheral clock enable"]
-            pub fn set_syscfgen(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "LPUART1 Peripheral Clocks Enable"]
-            pub const fn lpuart1en(&self) -> super::vals::C1Apb4enrSyscfgen {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::C1Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "LPUART1 Peripheral Clocks Enable"]
-            pub fn set_lpuart1en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "SPI6 Peripheral Clocks Enable"]
-            pub const fn spi6en(&self) -> super::vals::C1Apb4enrSyscfgen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::C1Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "SPI6 Peripheral Clocks Enable"]
-            pub fn set_spi6en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "I2C4 Peripheral Clocks Enable"]
-            pub const fn i2c4en(&self) -> super::vals::C1Apb4enrSyscfgen {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::C1Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "I2C4 Peripheral Clocks Enable"]
-            pub fn set_i2c4en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "LPTIM2 Peripheral Clocks Enable"]
-            pub const fn lptim2en(&self) -> super::vals::C1Apb4enrSyscfgen {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::C1Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "LPTIM2 Peripheral Clocks Enable"]
-            pub fn set_lptim2en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "LPTIM3 Peripheral Clocks Enable"]
-            pub const fn lptim3en(&self) -> super::vals::C1Apb4enrSyscfgen {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::C1Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "LPTIM3 Peripheral Clocks Enable"]
-            pub fn set_lptim3en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "LPTIM4 Peripheral Clocks Enable"]
-            pub const fn lptim4en(&self) -> super::vals::C1Apb4enrSyscfgen {
-                let val = (self.0 >> 11usize) & 0x01;
-                super::vals::C1Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "LPTIM4 Peripheral Clocks Enable"]
-            pub fn set_lptim4en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
-            }
-            #[doc = "LPTIM5 Peripheral Clocks Enable"]
-            pub const fn lptim5en(&self) -> super::vals::C1Apb4enrSyscfgen {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::C1Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "LPTIM5 Peripheral Clocks Enable"]
-            pub fn set_lptim5en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "COMP1/2 peripheral clock enable"]
-            pub const fn comp12en(&self) -> super::vals::C1Apb4enrSyscfgen {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::C1Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "COMP1/2 peripheral clock enable"]
-            pub fn set_comp12en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "VREF peripheral clock enable"]
-            pub const fn vrefen(&self) -> super::vals::C1Apb4enrSyscfgen {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::C1Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "VREF peripheral clock enable"]
-            pub fn set_vrefen(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
-            #[doc = "RTC APB Clock Enable"]
-            pub const fn rtcapben(&self) -> super::vals::C1Apb4enrSyscfgen {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::C1Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "RTC APB Clock Enable"]
-            pub fn set_rtcapben(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "SAI4 Peripheral Clocks Enable"]
-            pub const fn sai4en(&self) -> super::vals::C1Apb4enrSyscfgen {
-                let val = (self.0 >> 21usize) & 0x01;
-                super::vals::C1Apb4enrSyscfgen(val as u8)
-            }
-            #[doc = "SAI4 Peripheral Clocks Enable"]
-            pub fn set_sai4en(&mut self, val: super::vals::C1Apb4enrSyscfgen) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
-            }
-        }
-        impl Default for C1Apb4enr {
-            fn default() -> C1Apb4enr {
-                C1Apb4enr(0)
-            }
-        }
-        #[doc = "RCC APB3 Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct C1Apb3enr(pub u32);
-        impl C1Apb3enr {
-            #[doc = "LTDC peripheral clock enable"]
-            pub const fn ltdcen(&self) -> super::vals::C1Apb3enrLtdcen {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::C1Apb3enrLtdcen(val as u8)
-            }
-            #[doc = "LTDC peripheral clock enable"]
-            pub fn set_ltdcen(&mut self, val: super::vals::C1Apb3enrLtdcen) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "WWDG1 Clock Enable"]
-            pub const fn wwdg1en(&self) -> super::vals::C1Apb3enrLtdcen {
-                let val = (self.0 >> 6usize) & 0x01;
-                super::vals::C1Apb3enrLtdcen(val as u8)
-            }
-            #[doc = "WWDG1 Clock Enable"]
-            pub fn set_wwdg1en(&mut self, val: super::vals::C1Apb3enrLtdcen) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
-            }
-        }
-        impl Default for C1Apb3enr {
-            fn default() -> C1Apb3enr {
-                C1Apb3enr(0)
-            }
-        }
-        #[doc = "RCC AHB2 Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct C1Ahb2enr(pub u32);
-        impl C1Ahb2enr {
-            #[doc = "DCMI peripheral clock"]
-            pub const fn dcmien(&self) -> super::vals::C1Ahb2enrDcmien {
+        pub struct Ahb3rstr(pub u32);
+        impl Ahb3rstr {
+            #[doc = "MDMA block reset"]
+            pub const fn mdmarst(&self) -> super::vals::Mdmarst {
                 let val = (self.0 >> 0usize) & 0x01;
-                super::vals::C1Ahb2enrDcmien(val as u8)
+                super::vals::Mdmarst(val as u8)
             }
-            #[doc = "DCMI peripheral clock"]
-            pub fn set_dcmien(&mut self, val: super::vals::C1Ahb2enrDcmien) {
+            #[doc = "MDMA block reset"]
+            pub fn set_mdmarst(&mut self, val: super::vals::Mdmarst) {
                 self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
             }
-            #[doc = "CRYPT peripheral clock enable"]
-            pub const fn crypten(&self) -> super::vals::C1Ahb2enrDcmien {
+            #[doc = "DMA2D block reset"]
+            pub const fn dma2drst(&self) -> super::vals::Mdmarst {
                 let val = (self.0 >> 4usize) & 0x01;
-                super::vals::C1Ahb2enrDcmien(val as u8)
+                super::vals::Mdmarst(val as u8)
             }
-            #[doc = "CRYPT peripheral clock enable"]
-            pub fn set_crypten(&mut self, val: super::vals::C1Ahb2enrDcmien) {
+            #[doc = "DMA2D block reset"]
+            pub fn set_dma2drst(&mut self, val: super::vals::Mdmarst) {
                 self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
             }
-            #[doc = "HASH peripheral clock enable"]
-            pub const fn hashen(&self) -> super::vals::C1Ahb2enrDcmien {
+            #[doc = "JPGDEC block reset"]
+            pub const fn jpgdecrst(&self) -> super::vals::Mdmarst {
                 let val = (self.0 >> 5usize) & 0x01;
-                super::vals::C1Ahb2enrDcmien(val as u8)
+                super::vals::Mdmarst(val as u8)
             }
-            #[doc = "HASH peripheral clock enable"]
-            pub fn set_hashen(&mut self, val: super::vals::C1Ahb2enrDcmien) {
+            #[doc = "JPGDEC block reset"]
+            pub fn set_jpgdecrst(&mut self, val: super::vals::Mdmarst) {
                 self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
             }
-            #[doc = "RNG peripheral clocks enable"]
-            pub const fn rngen(&self) -> super::vals::C1Ahb2enrDcmien {
-                let val = (self.0 >> 6usize) & 0x01;
-                super::vals::C1Ahb2enrDcmien(val as u8)
+            #[doc = "FMC block reset"]
+            pub const fn fmcrst(&self) -> super::vals::Mdmarst {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Mdmarst(val as u8)
             }
-            #[doc = "RNG peripheral clocks enable"]
-            pub fn set_rngen(&mut self, val: super::vals::C1Ahb2enrDcmien) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            #[doc = "FMC block reset"]
+            pub fn set_fmcrst(&mut self, val: super::vals::Mdmarst) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
             }
-            #[doc = "SDMMC2 and SDMMC2 delay clock enable"]
-            pub const fn sdmmc2en(&self) -> super::vals::C1Ahb2enrDcmien {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::C1Ahb2enrDcmien(val as u8)
+            #[doc = "QUADSPI and QUADSPI delay block reset"]
+            pub const fn qspirst(&self) -> super::vals::Mdmarst {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Mdmarst(val as u8)
             }
-            #[doc = "SDMMC2 and SDMMC2 delay clock enable"]
-            pub fn set_sdmmc2en(&mut self, val: super::vals::C1Ahb2enrDcmien) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            #[doc = "QUADSPI and QUADSPI delay block reset"]
+            pub fn set_qspirst(&mut self, val: super::vals::Mdmarst) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
             }
-            #[doc = "SRAM1 block enable"]
-            pub const fn sram1en(&self) -> super::vals::C1Ahb2enrDcmien {
-                let val = (self.0 >> 29usize) & 0x01;
-                super::vals::C1Ahb2enrDcmien(val as u8)
+            #[doc = "SDMMC1 and SDMMC1 delay block reset"]
+            pub const fn sdmmc1rst(&self) -> super::vals::Mdmarst {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Mdmarst(val as u8)
             }
-            #[doc = "SRAM1 block enable"]
-            pub fn set_sram1en(&mut self, val: super::vals::C1Ahb2enrDcmien) {
-                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
+            #[doc = "SDMMC1 and SDMMC1 delay block reset"]
+            pub fn set_sdmmc1rst(&mut self, val: super::vals::Mdmarst) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
             }
-            #[doc = "SRAM2 block enable"]
-            pub const fn sram2en(&self) -> super::vals::C1Ahb2enrDcmien {
-                let val = (self.0 >> 30usize) & 0x01;
-                super::vals::C1Ahb2enrDcmien(val as u8)
-            }
-            #[doc = "SRAM2 block enable"]
-            pub fn set_sram2en(&mut self, val: super::vals::C1Ahb2enrDcmien) {
-                self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize);
-            }
-            #[doc = "SRAM3 block enable"]
-            pub const fn sram3en(&self) -> super::vals::C1Ahb2enrDcmien {
+            #[doc = "CPU reset"]
+            pub const fn cpurst(&self) -> super::vals::Mdmarst {
                 let val = (self.0 >> 31usize) & 0x01;
-                super::vals::C1Ahb2enrDcmien(val as u8)
+                super::vals::Mdmarst(val as u8)
             }
-            #[doc = "SRAM3 block enable"]
-            pub fn set_sram3en(&mut self, val: super::vals::C1Ahb2enrDcmien) {
+            #[doc = "CPU reset"]
+            pub fn set_cpurst(&mut self, val: super::vals::Mdmarst) {
                 self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
             }
         }
-        impl Default for C1Ahb2enr {
-            fn default() -> C1Ahb2enr {
-                C1Ahb2enr(0)
+        impl Default for Ahb3rstr {
+            fn default() -> Ahb3rstr {
+                Ahb3rstr(0)
+            }
+        }
+        #[doc = "RCC Domain 3 Kernel Clock Configuration Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct D3ccipr(pub u32);
+        impl D3ccipr {
+            #[doc = "LPUART1 kernel clock source selection"]
+            pub const fn lpuart1sel(&self) -> super::vals::Lpuart1sel {
+                let val = (self.0 >> 0usize) & 0x07;
+                super::vals::Lpuart1sel(val as u8)
+            }
+            #[doc = "LPUART1 kernel clock source selection"]
+            pub fn set_lpuart1sel(&mut self, val: super::vals::Lpuart1sel) {
+                self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize);
+            }
+            #[doc = "I2C4 kernel clock source selection"]
+            pub const fn i2c4sel(&self) -> super::vals::I2c4sel {
+                let val = (self.0 >> 8usize) & 0x03;
+                super::vals::I2c4sel(val as u8)
+            }
+            #[doc = "I2C4 kernel clock source selection"]
+            pub fn set_i2c4sel(&mut self, val: super::vals::I2c4sel) {
+                self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize);
+            }
+            #[doc = "LPTIM2 kernel clock source selection"]
+            pub const fn lptim2sel(&self) -> super::vals::Lptim2sel {
+                let val = (self.0 >> 10usize) & 0x07;
+                super::vals::Lptim2sel(val as u8)
+            }
+            #[doc = "LPTIM2 kernel clock source selection"]
+            pub fn set_lptim2sel(&mut self, val: super::vals::Lptim2sel) {
+                self.0 = (self.0 & !(0x07 << 10usize)) | (((val.0 as u32) & 0x07) << 10usize);
+            }
+            #[doc = "LPTIM3,4,5 kernel clock source selection"]
+            pub const fn lptim345sel(&self) -> super::vals::Lptim2sel {
+                let val = (self.0 >> 13usize) & 0x07;
+                super::vals::Lptim2sel(val as u8)
+            }
+            #[doc = "LPTIM3,4,5 kernel clock source selection"]
+            pub fn set_lptim345sel(&mut self, val: super::vals::Lptim2sel) {
+                self.0 = (self.0 & !(0x07 << 13usize)) | (((val.0 as u32) & 0x07) << 13usize);
+            }
+            #[doc = "SAR ADC kernel clock source selection"]
+            pub const fn adcsel(&self) -> super::vals::Adcsel {
+                let val = (self.0 >> 16usize) & 0x03;
+                super::vals::Adcsel(val as u8)
+            }
+            #[doc = "SAR ADC kernel clock source selection"]
+            pub fn set_adcsel(&mut self, val: super::vals::Adcsel) {
+                self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize);
+            }
+            #[doc = "Sub-Block A of SAI4 kernel clock source selection"]
+            pub const fn sai4asel(&self) -> super::vals::Sai4asel {
+                let val = (self.0 >> 21usize) & 0x07;
+                super::vals::Sai4asel(val as u8)
+            }
+            #[doc = "Sub-Block A of SAI4 kernel clock source selection"]
+            pub fn set_sai4asel(&mut self, val: super::vals::Sai4asel) {
+                self.0 = (self.0 & !(0x07 << 21usize)) | (((val.0 as u32) & 0x07) << 21usize);
+            }
+            #[doc = "Sub-Block B of SAI4 kernel clock source selection"]
+            pub const fn sai4bsel(&self) -> super::vals::Sai4asel {
+                let val = (self.0 >> 24usize) & 0x07;
+                super::vals::Sai4asel(val as u8)
+            }
+            #[doc = "Sub-Block B of SAI4 kernel clock source selection"]
+            pub fn set_sai4bsel(&mut self, val: super::vals::Sai4asel) {
+                self.0 = (self.0 & !(0x07 << 24usize)) | (((val.0 as u32) & 0x07) << 24usize);
+            }
+            #[doc = "SPI6 kernel clock source selection"]
+            pub const fn spi6sel(&self) -> super::vals::Spi6sel {
+                let val = (self.0 >> 28usize) & 0x07;
+                super::vals::Spi6sel(val as u8)
+            }
+            #[doc = "SPI6 kernel clock source selection"]
+            pub fn set_spi6sel(&mut self, val: super::vals::Spi6sel) {
+                self.0 = (self.0 & !(0x07 << 28usize)) | (((val.0 as u32) & 0x07) << 28usize);
+            }
+        }
+        impl Default for D3ccipr {
+            fn default() -> D3ccipr {
+                D3ccipr(0)
             }
         }
         #[doc = "RCC APB1 Peripheral Reset Register"]
@@ -8967,293 +7709,370 @@ pub mod rcc_h7 {
                 Apb1lrstr(0)
             }
         }
-        #[doc = "RCC Domain 2 Kernel Clock Configuration Register"]
+        #[doc = "RCC APB4 Sleep Clock Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct D2ccip2r(pub u32);
-        impl D2ccip2r {
-            #[doc = "USART2/3, UART4,5, 7/8 (APB1) kernel clock source selection"]
-            pub const fn usart234578sel(&self) -> super::vals::Usart234578sel {
-                let val = (self.0 >> 0usize) & 0x07;
-                super::vals::Usart234578sel(val as u8)
+        pub struct Apb4lpenr(pub u32);
+        impl Apb4lpenr {
+            #[doc = "SYSCFG peripheral clock enable during CSleep mode"]
+            pub const fn syscfglpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Apb4lpenrSyscfglpen(val as u8)
             }
-            #[doc = "USART2/3, UART4,5, 7/8 (APB1) kernel clock source selection"]
-            pub fn set_usart234578sel(&mut self, val: super::vals::Usart234578sel) {
-                self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize);
+            #[doc = "SYSCFG peripheral clock enable during CSleep mode"]
+            pub fn set_syscfglpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
             }
-            #[doc = "USART1 and 6 kernel clock source selection"]
-            pub const fn usart16sel(&self) -> super::vals::Usart16sel {
-                let val = (self.0 >> 3usize) & 0x07;
-                super::vals::Usart16sel(val as u8)
-            }
-            #[doc = "USART1 and 6 kernel clock source selection"]
-            pub fn set_usart16sel(&mut self, val: super::vals::Usart16sel) {
-                self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize);
-            }
-            #[doc = "RNG kernel clock source selection"]
-            pub const fn rngsel(&self) -> super::vals::Rngsel {
-                let val = (self.0 >> 8usize) & 0x03;
-                super::vals::Rngsel(val as u8)
-            }
-            #[doc = "RNG kernel clock source selection"]
-            pub fn set_rngsel(&mut self, val: super::vals::Rngsel) {
-                self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize);
-            }
-            #[doc = "I2C1,2,3 kernel clock source selection"]
-            pub const fn i2c123sel(&self) -> super::vals::I2c123sel {
-                let val = (self.0 >> 12usize) & 0x03;
-                super::vals::I2c123sel(val as u8)
-            }
-            #[doc = "I2C1,2,3 kernel clock source selection"]
-            pub fn set_i2c123sel(&mut self, val: super::vals::I2c123sel) {
-                self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize);
-            }
-            #[doc = "USBOTG 1 and 2 kernel clock source selection"]
-            pub const fn usbsel(&self) -> super::vals::Usbsel {
-                let val = (self.0 >> 20usize) & 0x03;
-                super::vals::Usbsel(val as u8)
-            }
-            #[doc = "USBOTG 1 and 2 kernel clock source selection"]
-            pub fn set_usbsel(&mut self, val: super::vals::Usbsel) {
-                self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize);
-            }
-            #[doc = "HDMI-CEC kernel clock source selection"]
-            pub const fn cecsel(&self) -> super::vals::Cecsel {
-                let val = (self.0 >> 22usize) & 0x03;
-                super::vals::Cecsel(val as u8)
-            }
-            #[doc = "HDMI-CEC kernel clock source selection"]
-            pub fn set_cecsel(&mut self, val: super::vals::Cecsel) {
-                self.0 = (self.0 & !(0x03 << 22usize)) | (((val.0 as u32) & 0x03) << 22usize);
-            }
-            #[doc = "LPTIM1 kernel clock source selection"]
-            pub const fn lptim1sel(&self) -> super::vals::Lptim1sel {
-                let val = (self.0 >> 28usize) & 0x07;
-                super::vals::Lptim1sel(val as u8)
-            }
-            #[doc = "LPTIM1 kernel clock source selection"]
-            pub fn set_lptim1sel(&mut self, val: super::vals::Lptim1sel) {
-                self.0 = (self.0 & !(0x07 << 28usize)) | (((val.0 as u32) & 0x07) << 28usize);
-            }
-        }
-        impl Default for D2ccip2r {
-            fn default() -> D2ccip2r {
-                D2ccip2r(0)
-            }
-        }
-        #[doc = "RCC AHB3 Sleep Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct C1Ahb3lpenr(pub u32);
-        impl C1Ahb3lpenr {
-            #[doc = "MDMA Clock Enable During CSleep Mode"]
-            pub const fn mdmalpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
-            }
-            #[doc = "MDMA Clock Enable During CSleep Mode"]
-            pub fn set_mdmalpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "DMA2D Clock Enable During CSleep Mode"]
-            pub const fn dma2dlpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
-            }
-            #[doc = "DMA2D Clock Enable During CSleep Mode"]
-            pub fn set_dma2dlpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "JPGDEC Clock Enable During CSleep Mode"]
-            pub const fn jpgdeclpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
-            }
-            #[doc = "JPGDEC Clock Enable During CSleep Mode"]
-            pub fn set_jpgdeclpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Flash interface clock enable during csleep mode"]
-            pub const fn flashpren(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Flash interface clock enable during csleep mode"]
-            pub fn set_flashpren(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn fmclpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
-            }
-            #[doc = "FMC Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_fmclpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"]
-            pub const fn qspilpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
-            }
-            #[doc = "QUADSPI and QUADSPI Delay Clock Enable During CSleep Mode"]
-            pub fn set_qspilpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"]
-            pub const fn sdmmc1lpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
-            }
-            #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable During CSleep Mode"]
-            pub fn set_sdmmc1lpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"]
-            pub const fn d1dtcm1lpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
-            }
-            #[doc = "D1DTCM1 Block Clock Enable During CSleep mode"]
-            pub fn set_d1dtcm1lpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
-            }
-            #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"]
-            pub const fn dtcm2lpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
-                let val = (self.0 >> 29usize) & 0x01;
-                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
-            }
-            #[doc = "D1 DTCM2 Block Clock Enable During CSleep mode"]
-            pub fn set_dtcm2lpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
-                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
-            }
-            #[doc = "D1ITCM Block Clock Enable During CSleep mode"]
-            pub const fn itcmlpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
-                let val = (self.0 >> 30usize) & 0x01;
-                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
-            }
-            #[doc = "D1ITCM Block Clock Enable During CSleep mode"]
-            pub fn set_itcmlpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
-                self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize);
-            }
-            #[doc = "AXISRAM Block Clock Enable During CSleep mode"]
-            pub const fn axisramlpen(&self) -> super::vals::C1Ahb3lpenrMdmalpen {
-                let val = (self.0 >> 31usize) & 0x01;
-                super::vals::C1Ahb3lpenrMdmalpen(val as u8)
-            }
-            #[doc = "AXISRAM Block Clock Enable During CSleep mode"]
-            pub fn set_axisramlpen(&mut self, val: super::vals::C1Ahb3lpenrMdmalpen) {
-                self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
-            }
-        }
-        impl Default for C1Ahb3lpenr {
-            fn default() -> C1Ahb3lpenr {
-                C1Ahb3lpenr(0)
-            }
-        }
-        #[doc = "RCC HSI configuration register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Hsicfgr(pub u32);
-        impl Hsicfgr {
-            #[doc = "HSI clock calibration"]
-            pub const fn hsical(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x0fff;
-                val as u16
-            }
-            #[doc = "HSI clock calibration"]
-            pub fn set_hsical(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
-            }
-            #[doc = "HSI clock trimming"]
-            pub const fn hsitrim(&self) -> u8 {
-                let val = (self.0 >> 24usize) & 0x7f;
-                val as u8
-            }
-            #[doc = "HSI clock trimming"]
-            pub fn set_hsitrim(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize);
-            }
-        }
-        impl Default for Hsicfgr {
-            fn default() -> Hsicfgr {
-                Hsicfgr(0)
-            }
-        }
-        #[doc = "RCC PLL2 Dividers Configuration Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Pll2divr(pub u32);
-        impl Pll2divr {
-            #[doc = "Multiplication factor for PLL1 VCO"]
-            pub const fn divn2(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x01ff;
-                val as u16
-            }
-            #[doc = "Multiplication factor for PLL1 VCO"]
-            pub fn set_divn2(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize);
-            }
-            #[doc = "PLL1 DIVP division factor"]
-            pub const fn divp2(&self) -> u8 {
-                let val = (self.0 >> 9usize) & 0x7f;
-                val as u8
-            }
-            #[doc = "PLL1 DIVP division factor"]
-            pub fn set_divp2(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x7f << 9usize)) | (((val as u32) & 0x7f) << 9usize);
-            }
-            #[doc = "PLL1 DIVQ division factor"]
-            pub const fn divq2(&self) -> u8 {
-                let val = (self.0 >> 16usize) & 0x7f;
-                val as u8
-            }
-            #[doc = "PLL1 DIVQ division factor"]
-            pub fn set_divq2(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x7f << 16usize)) | (((val as u32) & 0x7f) << 16usize);
-            }
-            #[doc = "PLL1 DIVR division factor"]
-            pub const fn divr2(&self) -> u8 {
-                let val = (self.0 >> 24usize) & 0x7f;
-                val as u8
-            }
-            #[doc = "PLL1 DIVR division factor"]
-            pub fn set_divr2(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize);
-            }
-        }
-        impl Default for Pll2divr {
-            fn default() -> Pll2divr {
-                Pll2divr(0)
-            }
-        }
-        #[doc = "RCC APB3 Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb3enr(pub u32);
-        impl Apb3enr {
-            #[doc = "LTDC peripheral clock enable"]
-            pub const fn ltdcen(&self) -> super::vals::Apb3enrLtdcen {
+            #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn lpuart1lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
                 let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Apb3enrLtdcen(val as u8)
+                super::vals::Apb4lpenrSyscfglpen(val as u8)
             }
-            #[doc = "LTDC peripheral clock enable"]
-            pub fn set_ltdcen(&mut self, val: super::vals::Apb3enrLtdcen) {
+            #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_lpuart1lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
                 self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
             }
-            #[doc = "WWDG1 Clock Enable"]
-            pub const fn wwdg1en(&self) -> super::vals::Apb3enrLtdcen {
-                let val = (self.0 >> 6usize) & 0x01;
-                super::vals::Apb3enrLtdcen(val as u8)
+            #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn spi6lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Apb4lpenrSyscfglpen(val as u8)
             }
-            #[doc = "WWDG1 Clock Enable"]
-            pub fn set_wwdg1en(&mut self, val: super::vals::Apb3enrLtdcen) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_spi6lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn i2c4lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_i2c4lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn lptim2lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_lptim2lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn lptim3lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_lptim3lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn lptim4lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 11usize) & 0x01;
+                super::vals::Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_lptim4lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
+            }
+            #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn lptim5lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_lptim5lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "COMP1/2 peripheral clock enable during CSleep mode"]
+            pub const fn comp12lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "COMP1/2 peripheral clock enable during CSleep mode"]
+            pub fn set_comp12lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "VREF peripheral clock enable during CSleep mode"]
+            pub const fn vreflpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "VREF peripheral clock enable during CSleep mode"]
+            pub fn set_vreflpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "RTC APB Clock Enable During CSleep Mode"]
+            pub const fn rtcapblpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "RTC APB Clock Enable During CSleep Mode"]
+            pub fn set_rtcapblpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn sai4lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
+                let val = (self.0 >> 21usize) & 0x01;
+                super::vals::Apb4lpenrSyscfglpen(val as u8)
+            }
+            #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_sai4lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
             }
         }
-        impl Default for Apb3enr {
-            fn default() -> Apb3enr {
-                Apb3enr(0)
+        impl Default for Apb4lpenr {
+            fn default() -> Apb4lpenr {
+                Apb4lpenr(0)
+            }
+        }
+        #[doc = "RCC AHB1 Sleep Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct C1Ahb1lpenr(pub u32);
+        impl C1Ahb1lpenr {
+            #[doc = "DMA1 Clock Enable During CSleep Mode"]
+            pub const fn dma1lpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "DMA1 Clock Enable During CSleep Mode"]
+            pub fn set_dma1lpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "DMA2 Clock Enable During CSleep Mode"]
+            pub const fn dma2lpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "DMA2 Clock Enable During CSleep Mode"]
+            pub fn set_dma2lpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn adc12lpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "ADC1/2 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_adc12lpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"]
+            pub const fn eth1maclpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "Ethernet MAC bus interface Clock Enable During CSleep Mode"]
+            pub fn set_eth1maclpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"]
+            pub const fn eth1txlpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "Ethernet Transmission Clock Enable During CSleep Mode"]
+            pub fn set_eth1txlpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "Ethernet Reception Clock Enable During CSleep Mode"]
+            pub const fn eth1rxlpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 17usize) & 0x01;
+                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "Ethernet Reception Clock Enable During CSleep Mode"]
+            pub fn set_eth1rxlpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
+            }
+            #[doc = "USB1OTG peripheral clock enable during CSleep mode"]
+            pub const fn usb1otglpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 25usize) & 0x01;
+                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "USB1OTG peripheral clock enable during CSleep mode"]
+            pub fn set_usb1otglpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
+            }
+            #[doc = "USB_PHY1 clock enable during CSleep mode"]
+            pub const fn usb1ulpilpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 26usize) & 0x01;
+                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "USB_PHY1 clock enable during CSleep mode"]
+            pub fn set_usb1ulpilpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize);
+            }
+            #[doc = "USB2OTG peripheral clock enable during CSleep mode"]
+            pub const fn usb2otglpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 27usize) & 0x01;
+                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "USB2OTG peripheral clock enable during CSleep mode"]
+            pub fn set_usb2otglpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
+            }
+            #[doc = "USB_PHY2 clocks enable during CSleep mode"]
+            pub const fn usb2ulpilpen(&self) -> super::vals::C1Ahb1lpenrDma1lpen {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::C1Ahb1lpenrDma1lpen(val as u8)
+            }
+            #[doc = "USB_PHY2 clocks enable during CSleep mode"]
+            pub fn set_usb2ulpilpen(&mut self, val: super::vals::C1Ahb1lpenrDma1lpen) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
+            }
+        }
+        impl Default for C1Ahb1lpenr {
+            fn default() -> C1Ahb1lpenr {
+                C1Ahb1lpenr(0)
+            }
+        }
+        #[doc = "RCC APB2 Sleep Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Apb2lpenr(pub u32);
+        impl Apb2lpenr {
+            #[doc = "TIM1 peripheral clock enable during CSleep mode"]
+            pub const fn tim1lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Apb2lpenrTim1lpen(val as u8)
+            }
+            #[doc = "TIM1 peripheral clock enable during CSleep mode"]
+            pub fn set_tim1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "TIM8 peripheral clock enable during CSleep mode"]
+            pub const fn tim8lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Apb2lpenrTim1lpen(val as u8)
+            }
+            #[doc = "TIM8 peripheral clock enable during CSleep mode"]
+            pub fn set_tim8lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "USART1 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn usart1lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Apb2lpenrTim1lpen(val as u8)
+            }
+            #[doc = "USART1 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_usart1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "USART6 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn usart6lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Apb2lpenrTim1lpen(val as u8)
+            }
+            #[doc = "USART6 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_usart6lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "SPI1 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn spi1lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Apb2lpenrTim1lpen(val as u8)
+            }
+            #[doc = "SPI1 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_spi1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "SPI4 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn spi4lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
+                let val = (self.0 >> 13usize) & 0x01;
+                super::vals::Apb2lpenrTim1lpen(val as u8)
+            }
+            #[doc = "SPI4 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_spi4lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize);
+            }
+            #[doc = "TIM15 peripheral clock enable during CSleep mode"]
+            pub const fn tim15lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Apb2lpenrTim1lpen(val as u8)
+            }
+            #[doc = "TIM15 peripheral clock enable during CSleep mode"]
+            pub fn set_tim15lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "TIM16 peripheral clock enable during CSleep mode"]
+            pub const fn tim16lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
+                let val = (self.0 >> 17usize) & 0x01;
+                super::vals::Apb2lpenrTim1lpen(val as u8)
+            }
+            #[doc = "TIM16 peripheral clock enable during CSleep mode"]
+            pub fn set_tim16lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
+            }
+            #[doc = "TIM17 peripheral clock enable during CSleep mode"]
+            pub const fn tim17lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
+                let val = (self.0 >> 18usize) & 0x01;
+                super::vals::Apb2lpenrTim1lpen(val as u8)
+            }
+            #[doc = "TIM17 peripheral clock enable during CSleep mode"]
+            pub fn set_tim17lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
+            }
+            #[doc = "SPI5 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn spi5lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
+                let val = (self.0 >> 20usize) & 0x01;
+                super::vals::Apb2lpenrTim1lpen(val as u8)
+            }
+            #[doc = "SPI5 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_spi5lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize);
+            }
+            #[doc = "SAI1 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn sai1lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
+                let val = (self.0 >> 22usize) & 0x01;
+                super::vals::Apb2lpenrTim1lpen(val as u8)
+            }
+            #[doc = "SAI1 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_sai1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
+            }
+            #[doc = "SAI2 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn sai2lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
+                let val = (self.0 >> 23usize) & 0x01;
+                super::vals::Apb2lpenrTim1lpen(val as u8)
+            }
+            #[doc = "SAI2 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_sai2lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
+                self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize);
+            }
+            #[doc = "SAI3 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn sai3lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
+                let val = (self.0 >> 24usize) & 0x01;
+                super::vals::Apb2lpenrTim1lpen(val as u8)
+            }
+            #[doc = "SAI3 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_sai3lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
+            }
+            #[doc = "DFSDM1 Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn dfsdm1lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::Apb2lpenrTim1lpen(val as u8)
+            }
+            #[doc = "DFSDM1 Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_dfsdm1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
+            }
+            #[doc = "HRTIM peripheral clock enable during CSleep mode"]
+            pub const fn hrtimlpen(&self) -> super::vals::Apb2lpenrTim1lpen {
+                let val = (self.0 >> 29usize) & 0x01;
+                super::vals::Apb2lpenrTim1lpen(val as u8)
+            }
+            #[doc = "HRTIM peripheral clock enable during CSleep mode"]
+            pub fn set_hrtimlpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
+                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
+            }
+        }
+        impl Default for Apb2lpenr {
+            fn default() -> Apb2lpenr {
+                Apb2lpenr(0)
             }
         }
         #[doc = "RCC APB2 Clock Register"]
@@ -9402,354 +8221,923 @@ pub mod rcc_h7 {
                 C1Apb2enr(0)
             }
         }
-        #[doc = "RCC AHB2 Clock Register"]
+        #[doc = "RCC APB2 Peripheral Reset Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ahb2enr(pub u32);
-        impl Ahb2enr {
-            #[doc = "DCMI peripheral clock"]
-            pub const fn dcmien(&self) -> super::vals::Ahb2enrDcmien {
+        pub struct Apb2rstr(pub u32);
+        impl Apb2rstr {
+            #[doc = "TIM1 block reset"]
+            pub const fn tim1rst(&self) -> super::vals::Tim1rst {
                 let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Ahb2enrDcmien(val as u8)
+                super::vals::Tim1rst(val as u8)
             }
-            #[doc = "DCMI peripheral clock"]
-            pub fn set_dcmien(&mut self, val: super::vals::Ahb2enrDcmien) {
+            #[doc = "TIM1 block reset"]
+            pub fn set_tim1rst(&mut self, val: super::vals::Tim1rst) {
                 self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
             }
-            #[doc = "CRYPT peripheral clock enable"]
-            pub const fn crypten(&self) -> super::vals::Ahb2enrDcmien {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Ahb2enrDcmien(val as u8)
+            #[doc = "TIM8 block reset"]
+            pub const fn tim8rst(&self) -> super::vals::Tim1rst {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Tim1rst(val as u8)
             }
-            #[doc = "CRYPT peripheral clock enable"]
-            pub fn set_crypten(&mut self, val: super::vals::Ahb2enrDcmien) {
+            #[doc = "TIM8 block reset"]
+            pub fn set_tim8rst(&mut self, val: super::vals::Tim1rst) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "USART1 block reset"]
+            pub const fn usart1rst(&self) -> super::vals::Tim1rst {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Tim1rst(val as u8)
+            }
+            #[doc = "USART1 block reset"]
+            pub fn set_usart1rst(&mut self, val: super::vals::Tim1rst) {
                 self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
             }
-            #[doc = "HASH peripheral clock enable"]
-            pub const fn hashen(&self) -> super::vals::Ahb2enrDcmien {
+            #[doc = "USART6 block reset"]
+            pub const fn usart6rst(&self) -> super::vals::Tim1rst {
                 let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Ahb2enrDcmien(val as u8)
+                super::vals::Tim1rst(val as u8)
             }
-            #[doc = "HASH peripheral clock enable"]
-            pub fn set_hashen(&mut self, val: super::vals::Ahb2enrDcmien) {
+            #[doc = "USART6 block reset"]
+            pub fn set_usart6rst(&mut self, val: super::vals::Tim1rst) {
                 self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
             }
-            #[doc = "RNG peripheral clocks enable"]
-            pub const fn rngen(&self) -> super::vals::Ahb2enrDcmien {
-                let val = (self.0 >> 6usize) & 0x01;
-                super::vals::Ahb2enrDcmien(val as u8)
+            #[doc = "SPI1 block reset"]
+            pub const fn spi1rst(&self) -> super::vals::Tim1rst {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Tim1rst(val as u8)
             }
-            #[doc = "RNG peripheral clocks enable"]
-            pub fn set_rngen(&mut self, val: super::vals::Ahb2enrDcmien) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            #[doc = "SPI1 block reset"]
+            pub fn set_spi1rst(&mut self, val: super::vals::Tim1rst) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
             }
-            #[doc = "SDMMC2 and SDMMC2 delay clock enable"]
-            pub const fn sdmmc2en(&self) -> super::vals::Ahb2enrDcmien {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Ahb2enrDcmien(val as u8)
+            #[doc = "SPI4 block reset"]
+            pub const fn spi4rst(&self) -> super::vals::Tim1rst {
+                let val = (self.0 >> 13usize) & 0x01;
+                super::vals::Tim1rst(val as u8)
             }
-            #[doc = "SDMMC2 and SDMMC2 delay clock enable"]
-            pub fn set_sdmmc2en(&mut self, val: super::vals::Ahb2enrDcmien) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            #[doc = "SPI4 block reset"]
+            pub fn set_spi4rst(&mut self, val: super::vals::Tim1rst) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize);
             }
-            #[doc = "SRAM1 block enable"]
-            pub const fn sram1en(&self) -> super::vals::Ahb2enrDcmien {
+            #[doc = "TIM15 block reset"]
+            pub const fn tim15rst(&self) -> super::vals::Tim1rst {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Tim1rst(val as u8)
+            }
+            #[doc = "TIM15 block reset"]
+            pub fn set_tim15rst(&mut self, val: super::vals::Tim1rst) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "TIM16 block reset"]
+            pub const fn tim16rst(&self) -> super::vals::Tim1rst {
+                let val = (self.0 >> 17usize) & 0x01;
+                super::vals::Tim1rst(val as u8)
+            }
+            #[doc = "TIM16 block reset"]
+            pub fn set_tim16rst(&mut self, val: super::vals::Tim1rst) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
+            }
+            #[doc = "TIM17 block reset"]
+            pub const fn tim17rst(&self) -> super::vals::Tim1rst {
+                let val = (self.0 >> 18usize) & 0x01;
+                super::vals::Tim1rst(val as u8)
+            }
+            #[doc = "TIM17 block reset"]
+            pub fn set_tim17rst(&mut self, val: super::vals::Tim1rst) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
+            }
+            #[doc = "SPI5 block reset"]
+            pub const fn spi5rst(&self) -> super::vals::Tim1rst {
+                let val = (self.0 >> 20usize) & 0x01;
+                super::vals::Tim1rst(val as u8)
+            }
+            #[doc = "SPI5 block reset"]
+            pub fn set_spi5rst(&mut self, val: super::vals::Tim1rst) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize);
+            }
+            #[doc = "SAI1 block reset"]
+            pub const fn sai1rst(&self) -> super::vals::Tim1rst {
+                let val = (self.0 >> 22usize) & 0x01;
+                super::vals::Tim1rst(val as u8)
+            }
+            #[doc = "SAI1 block reset"]
+            pub fn set_sai1rst(&mut self, val: super::vals::Tim1rst) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
+            }
+            #[doc = "SAI2 block reset"]
+            pub const fn sai2rst(&self) -> super::vals::Tim1rst {
+                let val = (self.0 >> 23usize) & 0x01;
+                super::vals::Tim1rst(val as u8)
+            }
+            #[doc = "SAI2 block reset"]
+            pub fn set_sai2rst(&mut self, val: super::vals::Tim1rst) {
+                self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize);
+            }
+            #[doc = "SAI3 block reset"]
+            pub const fn sai3rst(&self) -> super::vals::Tim1rst {
+                let val = (self.0 >> 24usize) & 0x01;
+                super::vals::Tim1rst(val as u8)
+            }
+            #[doc = "SAI3 block reset"]
+            pub fn set_sai3rst(&mut self, val: super::vals::Tim1rst) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
+            }
+            #[doc = "DFSDM1 block reset"]
+            pub const fn dfsdm1rst(&self) -> super::vals::Tim1rst {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::Tim1rst(val as u8)
+            }
+            #[doc = "DFSDM1 block reset"]
+            pub fn set_dfsdm1rst(&mut self, val: super::vals::Tim1rst) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
+            }
+            #[doc = "HRTIM block reset"]
+            pub const fn hrtimrst(&self) -> super::vals::Tim1rst {
                 let val = (self.0 >> 29usize) & 0x01;
-                super::vals::Ahb2enrDcmien(val as u8)
+                super::vals::Tim1rst(val as u8)
             }
-            #[doc = "SRAM1 block enable"]
-            pub fn set_sram1en(&mut self, val: super::vals::Ahb2enrDcmien) {
+            #[doc = "HRTIM block reset"]
+            pub fn set_hrtimrst(&mut self, val: super::vals::Tim1rst) {
                 self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
             }
-            #[doc = "SRAM2 block enable"]
-            pub const fn sram2en(&self) -> super::vals::Ahb2enrDcmien {
-                let val = (self.0 >> 30usize) & 0x01;
-                super::vals::Ahb2enrDcmien(val as u8)
-            }
-            #[doc = "SRAM2 block enable"]
-            pub fn set_sram2en(&mut self, val: super::vals::Ahb2enrDcmien) {
-                self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize);
-            }
-            #[doc = "SRAM3 block enable"]
-            pub const fn sram3en(&self) -> super::vals::Ahb2enrDcmien {
-                let val = (self.0 >> 31usize) & 0x01;
-                super::vals::Ahb2enrDcmien(val as u8)
-            }
-            #[doc = "SRAM3 block enable"]
-            pub fn set_sram3en(&mut self, val: super::vals::Ahb2enrDcmien) {
-                self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
+        }
+        impl Default for Apb2rstr {
+            fn default() -> Apb2rstr {
+                Apb2rstr(0)
             }
         }
-        impl Default for Ahb2enr {
-            fn default() -> Ahb2enr {
-                Ahb2enr(0)
+        #[doc = "RCC Domain 1 Clock Configuration Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct D1cfgr(pub u32);
+        impl D1cfgr {
+            #[doc = "D1 domain AHB prescaler"]
+            pub const fn hpre(&self) -> super::vals::Hpre {
+                let val = (self.0 >> 0usize) & 0x0f;
+                super::vals::Hpre(val as u8)
+            }
+            #[doc = "D1 domain AHB prescaler"]
+            pub fn set_hpre(&mut self, val: super::vals::Hpre) {
+                self.0 = (self.0 & !(0x0f << 0usize)) | (((val.0 as u32) & 0x0f) << 0usize);
+            }
+            #[doc = "D1 domain APB3 prescaler"]
+            pub const fn d1ppre(&self) -> super::vals::D1ppre {
+                let val = (self.0 >> 4usize) & 0x07;
+                super::vals::D1ppre(val as u8)
+            }
+            #[doc = "D1 domain APB3 prescaler"]
+            pub fn set_d1ppre(&mut self, val: super::vals::D1ppre) {
+                self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize);
+            }
+            #[doc = "D1 domain Core prescaler"]
+            pub const fn d1cpre(&self) -> super::vals::Hpre {
+                let val = (self.0 >> 8usize) & 0x0f;
+                super::vals::Hpre(val as u8)
+            }
+            #[doc = "D1 domain Core prescaler"]
+            pub fn set_d1cpre(&mut self, val: super::vals::Hpre) {
+                self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize);
+            }
+        }
+        impl Default for D1cfgr {
+            fn default() -> D1cfgr {
+                D1cfgr(0)
+            }
+        }
+        #[doc = "RCC AHB1 Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct C1Ahb1enr(pub u32);
+        impl C1Ahb1enr {
+            #[doc = "DMA1 Clock Enable"]
+            pub const fn dma1en(&self) -> super::vals::C1Ahb1enrDma1en {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::C1Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "DMA1 Clock Enable"]
+            pub fn set_dma1en(&mut self, val: super::vals::C1Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "DMA2 Clock Enable"]
+            pub const fn dma2en(&self) -> super::vals::C1Ahb1enrDma1en {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::C1Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "DMA2 Clock Enable"]
+            pub fn set_dma2en(&mut self, val: super::vals::C1Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "ADC1/2 Peripheral Clocks Enable"]
+            pub const fn adc12en(&self) -> super::vals::C1Ahb1enrDma1en {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::C1Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "ADC1/2 Peripheral Clocks Enable"]
+            pub fn set_adc12en(&mut self, val: super::vals::C1Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Ethernet MAC bus interface Clock Enable"]
+            pub const fn eth1macen(&self) -> super::vals::C1Ahb1enrDma1en {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::C1Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "Ethernet MAC bus interface Clock Enable"]
+            pub fn set_eth1macen(&mut self, val: super::vals::C1Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "Ethernet Transmission Clock Enable"]
+            pub const fn eth1txen(&self) -> super::vals::C1Ahb1enrDma1en {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::C1Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "Ethernet Transmission Clock Enable"]
+            pub fn set_eth1txen(&mut self, val: super::vals::C1Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "Ethernet Reception Clock Enable"]
+            pub const fn eth1rxen(&self) -> super::vals::C1Ahb1enrDma1en {
+                let val = (self.0 >> 17usize) & 0x01;
+                super::vals::C1Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "Ethernet Reception Clock Enable"]
+            pub fn set_eth1rxen(&mut self, val: super::vals::C1Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
+            }
+            #[doc = "USB1OTG Peripheral Clocks Enable"]
+            pub const fn usb1otgen(&self) -> super::vals::C1Ahb1enrDma1en {
+                let val = (self.0 >> 25usize) & 0x01;
+                super::vals::C1Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "USB1OTG Peripheral Clocks Enable"]
+            pub fn set_usb1otgen(&mut self, val: super::vals::C1Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
+            }
+            #[doc = "USB_PHY1 Clocks Enable"]
+            pub const fn usb1ulpien(&self) -> super::vals::C1Ahb1enrDma1en {
+                let val = (self.0 >> 26usize) & 0x01;
+                super::vals::C1Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "USB_PHY1 Clocks Enable"]
+            pub fn set_usb1ulpien(&mut self, val: super::vals::C1Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize);
+            }
+            #[doc = "USB2OTG Peripheral Clocks Enable"]
+            pub const fn usb2otgen(&self) -> super::vals::C1Ahb1enrDma1en {
+                let val = (self.0 >> 27usize) & 0x01;
+                super::vals::C1Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "USB2OTG Peripheral Clocks Enable"]
+            pub fn set_usb2otgen(&mut self, val: super::vals::C1Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
+            }
+            #[doc = "USB_PHY2 Clocks Enable"]
+            pub const fn usb2ulpien(&self) -> super::vals::C1Ahb1enrDma1en {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::C1Ahb1enrDma1en(val as u8)
+            }
+            #[doc = "USB_PHY2 Clocks Enable"]
+            pub fn set_usb2ulpien(&mut self, val: super::vals::C1Ahb1enrDma1en) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
+            }
+        }
+        impl Default for C1Ahb1enr {
+            fn default() -> C1Ahb1enr {
+                C1Ahb1enr(0)
+            }
+        }
+        #[doc = "RCC PLL1 Fractional Divider Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Pll1fracr(pub u32);
+        impl Pll1fracr {
+            #[doc = "Fractional part of the multiplication factor for PLL1 VCO"]
+            pub const fn fracn1(&self) -> u16 {
+                let val = (self.0 >> 3usize) & 0x1fff;
+                val as u16
+            }
+            #[doc = "Fractional part of the multiplication factor for PLL1 VCO"]
+            pub fn set_fracn1(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x1fff << 3usize)) | (((val as u32) & 0x1fff) << 3usize);
+            }
+        }
+        impl Default for Pll1fracr {
+            fn default() -> Pll1fracr {
+                Pll1fracr(0)
+            }
+        }
+        #[doc = "RCC Reset Status Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct C1Rsr(pub u32);
+        impl C1Rsr {
+            #[doc = "Remove reset flag"]
+            pub const fn rmvf(&self) -> super::vals::C1RsrRmvf {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::C1RsrRmvf(val as u8)
+            }
+            #[doc = "Remove reset flag"]
+            pub fn set_rmvf(&mut self, val: super::vals::C1RsrRmvf) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "CPU reset flag"]
+            pub const fn cpurstf(&self) -> bool {
+                let val = (self.0 >> 17usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CPU reset flag"]
+            pub fn set_cpurstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
+            }
+            #[doc = "D1 domain power switch reset flag"]
+            pub const fn d1rstf(&self) -> bool {
+                let val = (self.0 >> 19usize) & 0x01;
+                val != 0
+            }
+            #[doc = "D1 domain power switch reset flag"]
+            pub fn set_d1rstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize);
+            }
+            #[doc = "D2 domain power switch reset flag"]
+            pub const fn d2rstf(&self) -> bool {
+                let val = (self.0 >> 20usize) & 0x01;
+                val != 0
+            }
+            #[doc = "D2 domain power switch reset flag"]
+            pub fn set_d2rstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
+            }
+            #[doc = "BOR reset flag"]
+            pub const fn borrstf(&self) -> bool {
+                let val = (self.0 >> 21usize) & 0x01;
+                val != 0
+            }
+            #[doc = "BOR reset flag"]
+            pub fn set_borrstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
+            }
+            #[doc = "Pin reset flag (NRST)"]
+            pub const fn pinrstf(&self) -> bool {
+                let val = (self.0 >> 22usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Pin reset flag (NRST)"]
+            pub fn set_pinrstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
+            }
+            #[doc = "POR/PDR reset flag"]
+            pub const fn porrstf(&self) -> bool {
+                let val = (self.0 >> 23usize) & 0x01;
+                val != 0
+            }
+            #[doc = "POR/PDR reset flag"]
+            pub fn set_porrstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
+            }
+            #[doc = "System reset from CPU reset flag"]
+            pub const fn sftrstf(&self) -> bool {
+                let val = (self.0 >> 24usize) & 0x01;
+                val != 0
+            }
+            #[doc = "System reset from CPU reset flag"]
+            pub fn set_sftrstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize);
+            }
+            #[doc = "Independent Watchdog reset flag"]
+            pub const fn iwdg1rstf(&self) -> bool {
+                let val = (self.0 >> 26usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Independent Watchdog reset flag"]
+            pub fn set_iwdg1rstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
+            }
+            #[doc = "Window Watchdog reset flag"]
+            pub const fn wwdg1rstf(&self) -> bool {
+                let val = (self.0 >> 28usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Window Watchdog reset flag"]
+            pub fn set_wwdg1rstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize);
+            }
+            #[doc = "Reset due to illegal D1 DStandby or CPU CStop flag"]
+            pub const fn lpwrrstf(&self) -> bool {
+                let val = (self.0 >> 30usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Reset due to illegal D1 DStandby or CPU CStop flag"]
+            pub fn set_lpwrrstf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize);
+            }
+        }
+        impl Default for C1Rsr {
+            fn default() -> C1Rsr {
+                C1Rsr(0)
+            }
+        }
+        #[doc = "RCC HSI configuration register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Hsicfgr(pub u32);
+        impl Hsicfgr {
+            #[doc = "HSI clock calibration"]
+            pub const fn hsical(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x0fff;
+                val as u16
+            }
+            #[doc = "HSI clock calibration"]
+            pub fn set_hsical(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
+            }
+            #[doc = "HSI clock trimming"]
+            pub const fn hsitrim(&self) -> u8 {
+                let val = (self.0 >> 24usize) & 0x7f;
+                val as u8
+            }
+            #[doc = "HSI clock trimming"]
+            pub fn set_hsitrim(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize);
+            }
+        }
+        impl Default for Hsicfgr {
+            fn default() -> Hsicfgr {
+                Hsicfgr(0)
             }
         }
         #[doc = "RCC AHB3 Clock Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct C1Ahb3enr(pub u32);
-        impl C1Ahb3enr {
+        pub struct Ahb3enr(pub u32);
+        impl Ahb3enr {
             #[doc = "MDMA Peripheral Clock Enable"]
-            pub const fn mdmaen(&self) -> super::vals::C1Ahb3enrMdmaen {
+            pub const fn mdmaen(&self) -> super::vals::Ahb3enrMdmaen {
                 let val = (self.0 >> 0usize) & 0x01;
-                super::vals::C1Ahb3enrMdmaen(val as u8)
+                super::vals::Ahb3enrMdmaen(val as u8)
             }
             #[doc = "MDMA Peripheral Clock Enable"]
-            pub fn set_mdmaen(&mut self, val: super::vals::C1Ahb3enrMdmaen) {
+            pub fn set_mdmaen(&mut self, val: super::vals::Ahb3enrMdmaen) {
                 self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
             }
             #[doc = "DMA2D Peripheral Clock Enable"]
-            pub const fn dma2den(&self) -> super::vals::C1Ahb3enrMdmaen {
+            pub const fn dma2den(&self) -> super::vals::Ahb3enrMdmaen {
                 let val = (self.0 >> 4usize) & 0x01;
-                super::vals::C1Ahb3enrMdmaen(val as u8)
+                super::vals::Ahb3enrMdmaen(val as u8)
             }
             #[doc = "DMA2D Peripheral Clock Enable"]
-            pub fn set_dma2den(&mut self, val: super::vals::C1Ahb3enrMdmaen) {
+            pub fn set_dma2den(&mut self, val: super::vals::Ahb3enrMdmaen) {
                 self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
             }
             #[doc = "JPGDEC Peripheral Clock Enable"]
-            pub const fn jpgdecen(&self) -> super::vals::C1Ahb3enrMdmaen {
+            pub const fn jpgdecen(&self) -> super::vals::Ahb3enrMdmaen {
                 let val = (self.0 >> 5usize) & 0x01;
-                super::vals::C1Ahb3enrMdmaen(val as u8)
+                super::vals::Ahb3enrMdmaen(val as u8)
             }
             #[doc = "JPGDEC Peripheral Clock Enable"]
-            pub fn set_jpgdecen(&mut self, val: super::vals::C1Ahb3enrMdmaen) {
+            pub fn set_jpgdecen(&mut self, val: super::vals::Ahb3enrMdmaen) {
                 self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
             }
             #[doc = "FMC Peripheral Clocks Enable"]
-            pub const fn fmcen(&self) -> super::vals::C1Ahb3enrMdmaen {
+            pub const fn fmcen(&self) -> super::vals::Ahb3enrMdmaen {
                 let val = (self.0 >> 12usize) & 0x01;
-                super::vals::C1Ahb3enrMdmaen(val as u8)
+                super::vals::Ahb3enrMdmaen(val as u8)
             }
             #[doc = "FMC Peripheral Clocks Enable"]
-            pub fn set_fmcen(&mut self, val: super::vals::C1Ahb3enrMdmaen) {
+            pub fn set_fmcen(&mut self, val: super::vals::Ahb3enrMdmaen) {
                 self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
             }
             #[doc = "QUADSPI and QUADSPI Delay Clock Enable"]
-            pub const fn qspien(&self) -> super::vals::C1Ahb3enrMdmaen {
+            pub const fn qspien(&self) -> super::vals::Ahb3enrMdmaen {
                 let val = (self.0 >> 14usize) & 0x01;
-                super::vals::C1Ahb3enrMdmaen(val as u8)
+                super::vals::Ahb3enrMdmaen(val as u8)
             }
             #[doc = "QUADSPI and QUADSPI Delay Clock Enable"]
-            pub fn set_qspien(&mut self, val: super::vals::C1Ahb3enrMdmaen) {
+            pub fn set_qspien(&mut self, val: super::vals::Ahb3enrMdmaen) {
                 self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
             }
             #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable"]
-            pub const fn sdmmc1en(&self) -> super::vals::C1Ahb3enrMdmaen {
+            pub const fn sdmmc1en(&self) -> super::vals::Ahb3enrMdmaen {
                 let val = (self.0 >> 16usize) & 0x01;
-                super::vals::C1Ahb3enrMdmaen(val as u8)
+                super::vals::Ahb3enrMdmaen(val as u8)
             }
             #[doc = "SDMMC1 and SDMMC1 Delay Clock Enable"]
-            pub fn set_sdmmc1en(&mut self, val: super::vals::C1Ahb3enrMdmaen) {
+            pub fn set_sdmmc1en(&mut self, val: super::vals::Ahb3enrMdmaen) {
                 self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
             }
         }
-        impl Default for C1Ahb3enr {
-            fn default() -> C1Ahb3enr {
-                C1Ahb3enr(0)
+        impl Default for Ahb3enr {
+            fn default() -> Ahb3enr {
+                Ahb3enr(0)
             }
         }
-        #[doc = "RCC Domain 3 Kernel Clock Configuration Register"]
+        #[doc = "RCC AHB4 Peripheral Reset Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct D3ccipr(pub u32);
-        impl D3ccipr {
-            #[doc = "LPUART1 kernel clock source selection"]
-            pub const fn lpuart1sel(&self) -> super::vals::Lpuart1sel {
-                let val = (self.0 >> 0usize) & 0x07;
-                super::vals::Lpuart1sel(val as u8)
+        pub struct Ahb4rstr(pub u32);
+        impl Ahb4rstr {
+            #[doc = "GPIO block reset"]
+            pub const fn gpioarst(&self) -> super::vals::Gpioarst {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Gpioarst(val as u8)
             }
-            #[doc = "LPUART1 kernel clock source selection"]
-            pub fn set_lpuart1sel(&mut self, val: super::vals::Lpuart1sel) {
-                self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize);
+            #[doc = "GPIO block reset"]
+            pub fn set_gpioarst(&mut self, val: super::vals::Gpioarst) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
             }
-            #[doc = "I2C4 kernel clock source selection"]
-            pub const fn i2c4sel(&self) -> super::vals::I2c4sel {
-                let val = (self.0 >> 8usize) & 0x03;
-                super::vals::I2c4sel(val as u8)
-            }
-            #[doc = "I2C4 kernel clock source selection"]
-            pub fn set_i2c4sel(&mut self, val: super::vals::I2c4sel) {
-                self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize);
-            }
-            #[doc = "LPTIM2 kernel clock source selection"]
-            pub const fn lptim2sel(&self) -> super::vals::Lptim2sel {
-                let val = (self.0 >> 10usize) & 0x07;
-                super::vals::Lptim2sel(val as u8)
-            }
-            #[doc = "LPTIM2 kernel clock source selection"]
-            pub fn set_lptim2sel(&mut self, val: super::vals::Lptim2sel) {
-                self.0 = (self.0 & !(0x07 << 10usize)) | (((val.0 as u32) & 0x07) << 10usize);
-            }
-            #[doc = "LPTIM3,4,5 kernel clock source selection"]
-            pub const fn lptim345sel(&self) -> super::vals::Lptim2sel {
-                let val = (self.0 >> 13usize) & 0x07;
-                super::vals::Lptim2sel(val as u8)
-            }
-            #[doc = "LPTIM3,4,5 kernel clock source selection"]
-            pub fn set_lptim345sel(&mut self, val: super::vals::Lptim2sel) {
-                self.0 = (self.0 & !(0x07 << 13usize)) | (((val.0 as u32) & 0x07) << 13usize);
-            }
-            #[doc = "SAR ADC kernel clock source selection"]
-            pub const fn adcsel(&self) -> super::vals::Adcsel {
-                let val = (self.0 >> 16usize) & 0x03;
-                super::vals::Adcsel(val as u8)
-            }
-            #[doc = "SAR ADC kernel clock source selection"]
-            pub fn set_adcsel(&mut self, val: super::vals::Adcsel) {
-                self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize);
-            }
-            #[doc = "Sub-Block A of SAI4 kernel clock source selection"]
-            pub const fn sai4asel(&self) -> super::vals::Sai4asel {
-                let val = (self.0 >> 21usize) & 0x07;
-                super::vals::Sai4asel(val as u8)
-            }
-            #[doc = "Sub-Block A of SAI4 kernel clock source selection"]
-            pub fn set_sai4asel(&mut self, val: super::vals::Sai4asel) {
-                self.0 = (self.0 & !(0x07 << 21usize)) | (((val.0 as u32) & 0x07) << 21usize);
-            }
-            #[doc = "Sub-Block B of SAI4 kernel clock source selection"]
-            pub const fn sai4bsel(&self) -> super::vals::Sai4asel {
-                let val = (self.0 >> 24usize) & 0x07;
-                super::vals::Sai4asel(val as u8)
-            }
-            #[doc = "Sub-Block B of SAI4 kernel clock source selection"]
-            pub fn set_sai4bsel(&mut self, val: super::vals::Sai4asel) {
-                self.0 = (self.0 & !(0x07 << 24usize)) | (((val.0 as u32) & 0x07) << 24usize);
-            }
-            #[doc = "SPI6 kernel clock source selection"]
-            pub const fn spi6sel(&self) -> super::vals::Spi6sel {
-                let val = (self.0 >> 28usize) & 0x07;
-                super::vals::Spi6sel(val as u8)
-            }
-            #[doc = "SPI6 kernel clock source selection"]
-            pub fn set_spi6sel(&mut self, val: super::vals::Spi6sel) {
-                self.0 = (self.0 & !(0x07 << 28usize)) | (((val.0 as u32) & 0x07) << 28usize);
-            }
-        }
-        impl Default for D3ccipr {
-            fn default() -> D3ccipr {
-                D3ccipr(0)
-            }
-        }
-        #[doc = "RCC APB4 Sleep Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct C1Apb4lpenr(pub u32);
-        impl C1Apb4lpenr {
-            #[doc = "SYSCFG peripheral clock enable during CSleep mode"]
-            pub const fn syscfglpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+            #[doc = "GPIO block reset"]
+            pub const fn gpiobrst(&self) -> super::vals::Gpioarst {
                 let val = (self.0 >> 1usize) & 0x01;
-                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+                super::vals::Gpioarst(val as u8)
             }
-            #[doc = "SYSCFG peripheral clock enable during CSleep mode"]
-            pub fn set_syscfglpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+            #[doc = "GPIO block reset"]
+            pub fn set_gpiobrst(&mut self, val: super::vals::Gpioarst) {
                 self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
             }
-            #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn lpuart1lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            #[doc = "GPIO block reset"]
+            pub const fn gpiocrst(&self) -> super::vals::Gpioarst {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Gpioarst(val as u8)
             }
-            #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_lpuart1lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+            #[doc = "GPIO block reset"]
+            pub fn set_gpiocrst(&mut self, val: super::vals::Gpioarst) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "GPIO block reset"]
+            pub const fn gpiodrst(&self) -> super::vals::Gpioarst {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Gpioarst(val as u8)
+            }
+            #[doc = "GPIO block reset"]
+            pub fn set_gpiodrst(&mut self, val: super::vals::Gpioarst) {
                 self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
             }
-            #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn spi6lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            #[doc = "GPIO block reset"]
+            pub const fn gpioerst(&self) -> super::vals::Gpioarst {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Gpioarst(val as u8)
             }
-            #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_spi6lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+            #[doc = "GPIO block reset"]
+            pub fn set_gpioerst(&mut self, val: super::vals::Gpioarst) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "GPIO block reset"]
+            pub const fn gpiofrst(&self) -> super::vals::Gpioarst {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Gpioarst(val as u8)
+            }
+            #[doc = "GPIO block reset"]
+            pub fn set_gpiofrst(&mut self, val: super::vals::Gpioarst) {
                 self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
             }
-            #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn i2c4lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            #[doc = "GPIO block reset"]
+            pub const fn gpiogrst(&self) -> super::vals::Gpioarst {
+                let val = (self.0 >> 6usize) & 0x01;
+                super::vals::Gpioarst(val as u8)
             }
-            #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_i2c4lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+            #[doc = "GPIO block reset"]
+            pub fn set_gpiogrst(&mut self, val: super::vals::Gpioarst) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            }
+            #[doc = "GPIO block reset"]
+            pub const fn gpiohrst(&self) -> super::vals::Gpioarst {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Gpioarst(val as u8)
+            }
+            #[doc = "GPIO block reset"]
+            pub fn set_gpiohrst(&mut self, val: super::vals::Gpioarst) {
                 self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
             }
-            #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn lptim2lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            #[doc = "GPIO block reset"]
+            pub const fn gpioirst(&self) -> super::vals::Gpioarst {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::Gpioarst(val as u8)
             }
-            #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_lptim2lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+            #[doc = "GPIO block reset"]
+            pub fn set_gpioirst(&mut self, val: super::vals::Gpioarst) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+            #[doc = "GPIO block reset"]
+            pub const fn gpiojrst(&self) -> super::vals::Gpioarst {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Gpioarst(val as u8)
+            }
+            #[doc = "GPIO block reset"]
+            pub fn set_gpiojrst(&mut self, val: super::vals::Gpioarst) {
                 self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
             }
-            #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn lptim3lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+            #[doc = "GPIO block reset"]
+            pub const fn gpiokrst(&self) -> super::vals::Gpioarst {
                 let val = (self.0 >> 10usize) & 0x01;
-                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+                super::vals::Gpioarst(val as u8)
             }
-            #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_lptim3lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+            #[doc = "GPIO block reset"]
+            pub fn set_gpiokrst(&mut self, val: super::vals::Gpioarst) {
                 self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
             }
-            #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn lptim4lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 11usize) & 0x01;
-                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+            #[doc = "CRC block reset"]
+            pub const fn crcrst(&self) -> super::vals::Gpioarst {
+                let val = (self.0 >> 19usize) & 0x01;
+                super::vals::Gpioarst(val as u8)
             }
-            #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_lptim4lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+            #[doc = "CRC block reset"]
+            pub fn set_crcrst(&mut self, val: super::vals::Gpioarst) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
+            }
+            #[doc = "BDMA block reset"]
+            pub const fn bdmarst(&self) -> super::vals::Gpioarst {
+                let val = (self.0 >> 21usize) & 0x01;
+                super::vals::Gpioarst(val as u8)
+            }
+            #[doc = "BDMA block reset"]
+            pub fn set_bdmarst(&mut self, val: super::vals::Gpioarst) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
+            }
+            #[doc = "ADC3 block reset"]
+            pub const fn adc3rst(&self) -> super::vals::Gpioarst {
+                let val = (self.0 >> 24usize) & 0x01;
+                super::vals::Gpioarst(val as u8)
+            }
+            #[doc = "ADC3 block reset"]
+            pub fn set_adc3rst(&mut self, val: super::vals::Gpioarst) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
+            }
+            #[doc = "HSEM block reset"]
+            pub const fn hsemrst(&self) -> super::vals::Gpioarst {
+                let val = (self.0 >> 25usize) & 0x01;
+                super::vals::Gpioarst(val as u8)
+            }
+            #[doc = "HSEM block reset"]
+            pub fn set_hsemrst(&mut self, val: super::vals::Gpioarst) {
+                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
+            }
+        }
+        impl Default for Ahb4rstr {
+            fn default() -> Ahb4rstr {
+                Ahb4rstr(0)
+            }
+        }
+        #[doc = "RCC PLLs Clock Source Selection Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Pllckselr(pub u32);
+        impl Pllckselr {
+            #[doc = "DIVMx and PLLs clock source selection"]
+            pub const fn pllsrc(&self) -> super::vals::Pllsrc {
+                let val = (self.0 >> 0usize) & 0x03;
+                super::vals::Pllsrc(val as u8)
+            }
+            #[doc = "DIVMx and PLLs clock source selection"]
+            pub fn set_pllsrc(&mut self, val: super::vals::Pllsrc) {
+                self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize);
+            }
+            #[doc = "Prescaler for PLL1"]
+            pub fn divm(&self, n: usize) -> u8 {
+                assert!(n < 3usize);
+                let offs = 4usize + n * 8usize;
+                let val = (self.0 >> offs) & 0x3f;
+                val as u8
+            }
+            #[doc = "Prescaler for PLL1"]
+            pub fn set_divm(&mut self, n: usize, val: u8) {
+                assert!(n < 3usize);
+                let offs = 4usize + n * 8usize;
+                self.0 = (self.0 & !(0x3f << offs)) | (((val as u32) & 0x3f) << offs);
+            }
+        }
+        impl Default for Pllckselr {
+            fn default() -> Pllckselr {
+                Pllckselr(0)
+            }
+        }
+        #[doc = "RCC APB4 Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Apb4enr(pub u32);
+        impl Apb4enr {
+            #[doc = "SYSCFG peripheral clock enable"]
+            pub const fn syscfgen(&self) -> super::vals::Apb4enrSyscfgen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "SYSCFG peripheral clock enable"]
+            pub fn set_syscfgen(&mut self, val: super::vals::Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "LPUART1 Peripheral Clocks Enable"]
+            pub const fn lpuart1en(&self) -> super::vals::Apb4enrSyscfgen {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "LPUART1 Peripheral Clocks Enable"]
+            pub fn set_lpuart1en(&mut self, val: super::vals::Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "SPI6 Peripheral Clocks Enable"]
+            pub const fn spi6en(&self) -> super::vals::Apb4enrSyscfgen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "SPI6 Peripheral Clocks Enable"]
+            pub fn set_spi6en(&mut self, val: super::vals::Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "I2C4 Peripheral Clocks Enable"]
+            pub const fn i2c4en(&self) -> super::vals::Apb4enrSyscfgen {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "I2C4 Peripheral Clocks Enable"]
+            pub fn set_i2c4en(&mut self, val: super::vals::Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "LPTIM2 Peripheral Clocks Enable"]
+            pub const fn lptim2en(&self) -> super::vals::Apb4enrSyscfgen {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "LPTIM2 Peripheral Clocks Enable"]
+            pub fn set_lptim2en(&mut self, val: super::vals::Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "LPTIM3 Peripheral Clocks Enable"]
+            pub const fn lptim3en(&self) -> super::vals::Apb4enrSyscfgen {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "LPTIM3 Peripheral Clocks Enable"]
+            pub fn set_lptim3en(&mut self, val: super::vals::Apb4enrSyscfgen) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "LPTIM4 Peripheral Clocks Enable"]
+            pub const fn lptim4en(&self) -> super::vals::Apb4enrSyscfgen {
+                let val = (self.0 >> 11usize) & 0x01;
+                super::vals::Apb4enrSyscfgen(val as u8)
+            }
+            #[doc = "LPTIM4 Peripheral Clocks Enable"]
+            pub fn set_lptim4en(&mut self, val: super::vals::Apb4enrSyscfgen) {
                 self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
             }
-            #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn lptim5lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+            #[doc = "LPTIM5 Peripheral Clocks Enable"]
+            pub const fn lptim5en(&self) -> super::vals::Apb4enrSyscfgen {
                 let val = (self.0 >> 12usize) & 0x01;
-                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+                super::vals::Apb4enrSyscfgen(val as u8)
             }
-            #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_lptim5lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+            #[doc = "LPTIM5 Peripheral Clocks Enable"]
+            pub fn set_lptim5en(&mut self, val: super::vals::Apb4enrSyscfgen) {
                 self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
             }
-            #[doc = "COMP1/2 peripheral clock enable during CSleep mode"]
-            pub const fn comp12lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+            #[doc = "COMP1/2 peripheral clock enable"]
+            pub const fn comp12en(&self) -> super::vals::Apb4enrSyscfgen {
                 let val = (self.0 >> 14usize) & 0x01;
-                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+                super::vals::Apb4enrSyscfgen(val as u8)
             }
-            #[doc = "COMP1/2 peripheral clock enable during CSleep mode"]
-            pub fn set_comp12lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+            #[doc = "COMP1/2 peripheral clock enable"]
+            pub fn set_comp12en(&mut self, val: super::vals::Apb4enrSyscfgen) {
                 self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
             }
-            #[doc = "VREF peripheral clock enable during CSleep mode"]
-            pub const fn vreflpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+            #[doc = "VREF peripheral clock enable"]
+            pub const fn vrefen(&self) -> super::vals::Apb4enrSyscfgen {
                 let val = (self.0 >> 15usize) & 0x01;
-                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+                super::vals::Apb4enrSyscfgen(val as u8)
             }
-            #[doc = "VREF peripheral clock enable during CSleep mode"]
-            pub fn set_vreflpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+            #[doc = "VREF peripheral clock enable"]
+            pub fn set_vrefen(&mut self, val: super::vals::Apb4enrSyscfgen) {
                 self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
             }
-            #[doc = "RTC APB Clock Enable During CSleep Mode"]
-            pub const fn rtcapblpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+            #[doc = "RTC APB Clock Enable"]
+            pub const fn rtcapben(&self) -> super::vals::Apb4enrSyscfgen {
                 let val = (self.0 >> 16usize) & 0x01;
-                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+                super::vals::Apb4enrSyscfgen(val as u8)
             }
-            #[doc = "RTC APB Clock Enable During CSleep Mode"]
-            pub fn set_rtcapblpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+            #[doc = "RTC APB Clock Enable"]
+            pub fn set_rtcapben(&mut self, val: super::vals::Apb4enrSyscfgen) {
                 self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
             }
-            #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn sai4lpen(&self) -> super::vals::C1Apb4lpenrSyscfglpen {
+            #[doc = "SAI4 Peripheral Clocks Enable"]
+            pub const fn sai4en(&self) -> super::vals::Apb4enrSyscfgen {
                 let val = (self.0 >> 21usize) & 0x01;
-                super::vals::C1Apb4lpenrSyscfglpen(val as u8)
+                super::vals::Apb4enrSyscfgen(val as u8)
             }
-            #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_sai4lpen(&mut self, val: super::vals::C1Apb4lpenrSyscfglpen) {
+            #[doc = "SAI4 Peripheral Clocks Enable"]
+            pub fn set_sai4en(&mut self, val: super::vals::Apb4enrSyscfgen) {
                 self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
             }
         }
-        impl Default for C1Apb4lpenr {
-            fn default() -> C1Apb4lpenr {
-                C1Apb4lpenr(0)
+        impl Default for Apb4enr {
+            fn default() -> Apb4enr {
+                Apb4enr(0)
+            }
+        }
+        #[doc = "RCC AHB2 Sleep Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ahb2lpenr(pub u32);
+        impl Ahb2lpenr {
+            #[doc = "DCMI peripheral clock enable during csleep mode"]
+            pub const fn dcmilpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Ahb2lpenrDcmilpen(val as u8)
+            }
+            #[doc = "DCMI peripheral clock enable during csleep mode"]
+            pub fn set_dcmilpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "CRYPT peripheral clock enable during CSleep mode"]
+            pub const fn cryptlpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Ahb2lpenrDcmilpen(val as u8)
+            }
+            #[doc = "CRYPT peripheral clock enable during CSleep mode"]
+            pub fn set_cryptlpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "HASH peripheral clock enable during CSleep mode"]
+            pub const fn hashlpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Ahb2lpenrDcmilpen(val as u8)
+            }
+            #[doc = "HASH peripheral clock enable during CSleep mode"]
+            pub fn set_hashlpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "RNG peripheral clock enable during CSleep mode"]
+            pub const fn rnglpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
+                let val = (self.0 >> 6usize) & 0x01;
+                super::vals::Ahb2lpenrDcmilpen(val as u8)
+            }
+            #[doc = "RNG peripheral clock enable during CSleep mode"]
+            pub fn set_rnglpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            }
+            #[doc = "SDMMC2 and SDMMC2 Delay Clock Enable During CSleep Mode"]
+            pub const fn sdmmc2lpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Ahb2lpenrDcmilpen(val as u8)
+            }
+            #[doc = "SDMMC2 and SDMMC2 Delay Clock Enable During CSleep Mode"]
+            pub fn set_sdmmc2lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "SRAM1 Clock Enable During CSleep Mode"]
+            pub const fn sram1lpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
+                let val = (self.0 >> 29usize) & 0x01;
+                super::vals::Ahb2lpenrDcmilpen(val as u8)
+            }
+            #[doc = "SRAM1 Clock Enable During CSleep Mode"]
+            pub fn set_sram1lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
+                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
+            }
+            #[doc = "SRAM2 Clock Enable During CSleep Mode"]
+            pub const fn sram2lpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
+                let val = (self.0 >> 30usize) & 0x01;
+                super::vals::Ahb2lpenrDcmilpen(val as u8)
+            }
+            #[doc = "SRAM2 Clock Enable During CSleep Mode"]
+            pub fn set_sram2lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
+                self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize);
+            }
+            #[doc = "SRAM3 Clock Enable During CSleep Mode"]
+            pub const fn sram3lpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
+                let val = (self.0 >> 31usize) & 0x01;
+                super::vals::Ahb2lpenrDcmilpen(val as u8)
+            }
+            #[doc = "SRAM3 Clock Enable During CSleep Mode"]
+            pub fn set_sram3lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
+                self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
+            }
+        }
+        impl Default for Ahb2lpenr {
+            fn default() -> Ahb2lpenr {
+                Ahb2lpenr(0)
+            }
+        }
+        #[doc = "RCC APB3 Sleep Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct C1Apb3lpenr(pub u32);
+        impl C1Apb3lpenr {
+            #[doc = "LTDC peripheral clock enable during CSleep mode"]
+            pub const fn ltdclpen(&self) -> super::vals::C1Apb3lpenrLtdclpen {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::C1Apb3lpenrLtdclpen(val as u8)
+            }
+            #[doc = "LTDC peripheral clock enable during CSleep mode"]
+            pub fn set_ltdclpen(&mut self, val: super::vals::C1Apb3lpenrLtdclpen) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "WWDG1 Clock Enable During CSleep Mode"]
+            pub const fn wwdg1lpen(&self) -> super::vals::C1Apb3lpenrLtdclpen {
+                let val = (self.0 >> 6usize) & 0x01;
+                super::vals::C1Apb3lpenrLtdclpen(val as u8)
+            }
+            #[doc = "WWDG1 Clock Enable During CSleep Mode"]
+            pub fn set_wwdg1lpen(&mut self, val: super::vals::C1Apb3lpenrLtdclpen) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            }
+        }
+        impl Default for C1Apb3lpenr {
+            fn default() -> C1Apb3lpenr {
+                C1Apb3lpenr(0)
             }
         }
         #[doc = "RCC APB1 Clock Register"]
@@ -9979,260 +9367,331 @@ pub mod rcc_h7 {
                 Apb1lenr(0)
             }
         }
-        #[doc = "RCC APB2 Clock Register"]
+        #[doc = "RCC APB3 Peripheral Reset Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb2enr(pub u32);
-        impl Apb2enr {
-            #[doc = "TIM1 peripheral clock enable"]
-            pub const fn tim1en(&self) -> super::vals::Apb2enrTim1en {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Apb2enrTim1en(val as u8)
+        pub struct Apb3rstr(pub u32);
+        impl Apb3rstr {
+            #[doc = "LTDC block reset"]
+            pub const fn ltdcrst(&self) -> super::vals::Ltdcrst {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Ltdcrst(val as u8)
             }
-            #[doc = "TIM1 peripheral clock enable"]
-            pub fn set_tim1en(&mut self, val: super::vals::Apb2enrTim1en) {
+            #[doc = "LTDC block reset"]
+            pub fn set_ltdcrst(&mut self, val: super::vals::Ltdcrst) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+        }
+        impl Default for Apb3rstr {
+            fn default() -> Apb3rstr {
+                Apb3rstr(0)
+            }
+        }
+        #[doc = "RCC AHB4 Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ahb4enr(pub u32);
+        impl Ahb4enr {
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpioaen(&self) -> super::vals::Ahb4enrGpioaen {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpioaen(&mut self, val: super::vals::Ahb4enrGpioaen) {
                 self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
             }
-            #[doc = "TIM8 peripheral clock enable"]
-            pub const fn tim8en(&self) -> super::vals::Apb2enrTim1en {
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpioben(&self) -> super::vals::Ahb4enrGpioaen {
                 let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Apb2enrTim1en(val as u8)
+                super::vals::Ahb4enrGpioaen(val as u8)
             }
-            #[doc = "TIM8 peripheral clock enable"]
-            pub fn set_tim8en(&mut self, val: super::vals::Apb2enrTim1en) {
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpioben(&mut self, val: super::vals::Ahb4enrGpioaen) {
                 self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
             }
-            #[doc = "USART1 Peripheral Clocks Enable"]
-            pub const fn usart1en(&self) -> super::vals::Apb2enrTim1en {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Apb2enrTim1en(val as u8)
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpiocen(&self) -> super::vals::Ahb4enrGpioaen {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Ahb4enrGpioaen(val as u8)
             }
-            #[doc = "USART1 Peripheral Clocks Enable"]
-            pub fn set_usart1en(&mut self, val: super::vals::Apb2enrTim1en) {
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpiocen(&mut self, val: super::vals::Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpioden(&self) -> super::vals::Ahb4enrGpioaen {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpioden(&mut self, val: super::vals::Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpioeen(&self) -> super::vals::Ahb4enrGpioaen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpioeen(&mut self, val: super::vals::Ahb4enrGpioaen) {
                 self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
             }
-            #[doc = "USART6 Peripheral Clocks Enable"]
-            pub const fn usart6en(&self) -> super::vals::Apb2enrTim1en {
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpiofen(&self) -> super::vals::Ahb4enrGpioaen {
                 let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Apb2enrTim1en(val as u8)
+                super::vals::Ahb4enrGpioaen(val as u8)
             }
-            #[doc = "USART6 Peripheral Clocks Enable"]
-            pub fn set_usart6en(&mut self, val: super::vals::Apb2enrTim1en) {
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpiofen(&mut self, val: super::vals::Ahb4enrGpioaen) {
                 self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
             }
-            #[doc = "SPI1 Peripheral Clocks Enable"]
-            pub const fn spi1en(&self) -> super::vals::Apb2enrTim1en {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Apb2enrTim1en(val as u8)
-            }
-            #[doc = "SPI1 Peripheral Clocks Enable"]
-            pub fn set_spi1en(&mut self, val: super::vals::Apb2enrTim1en) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "SPI4 Peripheral Clocks Enable"]
-            pub const fn spi4en(&self) -> super::vals::Apb2enrTim1en {
-                let val = (self.0 >> 13usize) & 0x01;
-                super::vals::Apb2enrTim1en(val as u8)
-            }
-            #[doc = "SPI4 Peripheral Clocks Enable"]
-            pub fn set_spi4en(&mut self, val: super::vals::Apb2enrTim1en) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize);
-            }
-            #[doc = "TIM15 peripheral clock enable"]
-            pub const fn tim15en(&self) -> super::vals::Apb2enrTim1en {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Apb2enrTim1en(val as u8)
-            }
-            #[doc = "TIM15 peripheral clock enable"]
-            pub fn set_tim15en(&mut self, val: super::vals::Apb2enrTim1en) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "TIM16 peripheral clock enable"]
-            pub const fn tim16en(&self) -> super::vals::Apb2enrTim1en {
-                let val = (self.0 >> 17usize) & 0x01;
-                super::vals::Apb2enrTim1en(val as u8)
-            }
-            #[doc = "TIM16 peripheral clock enable"]
-            pub fn set_tim16en(&mut self, val: super::vals::Apb2enrTim1en) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
-            }
-            #[doc = "TIM17 peripheral clock enable"]
-            pub const fn tim17en(&self) -> super::vals::Apb2enrTim1en {
-                let val = (self.0 >> 18usize) & 0x01;
-                super::vals::Apb2enrTim1en(val as u8)
-            }
-            #[doc = "TIM17 peripheral clock enable"]
-            pub fn set_tim17en(&mut self, val: super::vals::Apb2enrTim1en) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
-            }
-            #[doc = "SPI5 Peripheral Clocks Enable"]
-            pub const fn spi5en(&self) -> super::vals::Apb2enrTim1en {
-                let val = (self.0 >> 20usize) & 0x01;
-                super::vals::Apb2enrTim1en(val as u8)
-            }
-            #[doc = "SPI5 Peripheral Clocks Enable"]
-            pub fn set_spi5en(&mut self, val: super::vals::Apb2enrTim1en) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize);
-            }
-            #[doc = "SAI1 Peripheral Clocks Enable"]
-            pub const fn sai1en(&self) -> super::vals::Apb2enrTim1en {
-                let val = (self.0 >> 22usize) & 0x01;
-                super::vals::Apb2enrTim1en(val as u8)
-            }
-            #[doc = "SAI1 Peripheral Clocks Enable"]
-            pub fn set_sai1en(&mut self, val: super::vals::Apb2enrTim1en) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
-            }
-            #[doc = "SAI2 Peripheral Clocks Enable"]
-            pub const fn sai2en(&self) -> super::vals::Apb2enrTim1en {
-                let val = (self.0 >> 23usize) & 0x01;
-                super::vals::Apb2enrTim1en(val as u8)
-            }
-            #[doc = "SAI2 Peripheral Clocks Enable"]
-            pub fn set_sai2en(&mut self, val: super::vals::Apb2enrTim1en) {
-                self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize);
-            }
-            #[doc = "SAI3 Peripheral Clocks Enable"]
-            pub const fn sai3en(&self) -> super::vals::Apb2enrTim1en {
-                let val = (self.0 >> 24usize) & 0x01;
-                super::vals::Apb2enrTim1en(val as u8)
-            }
-            #[doc = "SAI3 Peripheral Clocks Enable"]
-            pub fn set_sai3en(&mut self, val: super::vals::Apb2enrTim1en) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
-            }
-            #[doc = "DFSDM1 Peripheral Clocks Enable"]
-            pub const fn dfsdm1en(&self) -> super::vals::Apb2enrTim1en {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::Apb2enrTim1en(val as u8)
-            }
-            #[doc = "DFSDM1 Peripheral Clocks Enable"]
-            pub fn set_dfsdm1en(&mut self, val: super::vals::Apb2enrTim1en) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
-            }
-            #[doc = "HRTIM peripheral clock enable"]
-            pub const fn hrtimen(&self) -> super::vals::Apb2enrTim1en {
-                let val = (self.0 >> 29usize) & 0x01;
-                super::vals::Apb2enrTim1en(val as u8)
-            }
-            #[doc = "HRTIM peripheral clock enable"]
-            pub fn set_hrtimen(&mut self, val: super::vals::Apb2enrTim1en) {
-                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
-            }
-        }
-        impl Default for Apb2enr {
-            fn default() -> Apb2enr {
-                Apb2enr(0)
-            }
-        }
-        #[doc = "RCC Clock Configuration Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cfgr(pub u32);
-        impl Cfgr {
-            #[doc = "System clock switch"]
-            pub const fn sw(&self) -> super::vals::Sw {
-                let val = (self.0 >> 0usize) & 0x07;
-                super::vals::Sw(val as u8)
-            }
-            #[doc = "System clock switch"]
-            pub fn set_sw(&mut self, val: super::vals::Sw) {
-                self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize);
-            }
-            #[doc = "System clock switch status"]
-            pub const fn sws(&self) -> u8 {
-                let val = (self.0 >> 3usize) & 0x07;
-                val as u8
-            }
-            #[doc = "System clock switch status"]
-            pub fn set_sws(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x07 << 3usize)) | (((val as u32) & 0x07) << 3usize);
-            }
-            #[doc = "System clock selection after a wake up from system Stop"]
-            pub const fn stopwuck(&self) -> super::vals::Stopwuck {
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpiogen(&self) -> super::vals::Ahb4enrGpioaen {
                 let val = (self.0 >> 6usize) & 0x01;
-                super::vals::Stopwuck(val as u8)
+                super::vals::Ahb4enrGpioaen(val as u8)
             }
-            #[doc = "System clock selection after a wake up from system Stop"]
-            pub fn set_stopwuck(&mut self, val: super::vals::Stopwuck) {
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpiogen(&mut self, val: super::vals::Ahb4enrGpioaen) {
                 self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
             }
-            #[doc = "Kernel clock selection after a wake up from system Stop"]
-            pub const fn stopkerwuck(&self) -> super::vals::Stopwuck {
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpiohen(&self) -> super::vals::Ahb4enrGpioaen {
                 let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Stopwuck(val as u8)
+                super::vals::Ahb4enrGpioaen(val as u8)
             }
-            #[doc = "Kernel clock selection after a wake up from system Stop"]
-            pub fn set_stopkerwuck(&mut self, val: super::vals::Stopwuck) {
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpiohen(&mut self, val: super::vals::Ahb4enrGpioaen) {
                 self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
             }
-            #[doc = "HSE division factor for RTC clock"]
-            pub const fn rtcpre(&self) -> u8 {
-                let val = (self.0 >> 8usize) & 0x3f;
-                val as u8
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpioien(&self) -> super::vals::Ahb4enrGpioaen {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::Ahb4enrGpioaen(val as u8)
             }
-            #[doc = "HSE division factor for RTC clock"]
-            pub fn set_rtcpre(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x3f << 8usize)) | (((val as u32) & 0x3f) << 8usize);
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpioien(&mut self, val: super::vals::Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
             }
-            #[doc = "High Resolution Timer clock prescaler selection"]
-            pub const fn hrtimsel(&self) -> super::vals::Hrtimsel {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Hrtimsel(val as u8)
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpiojen(&self) -> super::vals::Ahb4enrGpioaen {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Ahb4enrGpioaen(val as u8)
             }
-            #[doc = "High Resolution Timer clock prescaler selection"]
-            pub fn set_hrtimsel(&mut self, val: super::vals::Hrtimsel) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpiojen(&mut self, val: super::vals::Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
             }
-            #[doc = "Timers clocks prescaler selection"]
-            pub const fn timpre(&self) -> super::vals::Timpre {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Timpre(val as u8)
+            #[doc = "0GPIO peripheral clock enable"]
+            pub const fn gpioken(&self) -> super::vals::Ahb4enrGpioaen {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::Ahb4enrGpioaen(val as u8)
             }
-            #[doc = "Timers clocks prescaler selection"]
-            pub fn set_timpre(&mut self, val: super::vals::Timpre) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            #[doc = "0GPIO peripheral clock enable"]
+            pub fn set_gpioken(&mut self, val: super::vals::Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
             }
-            #[doc = "MCO1 prescaler"]
-            pub const fn mco1pre(&self) -> u8 {
-                let val = (self.0 >> 18usize) & 0x0f;
-                val as u8
+            #[doc = "CRC peripheral clock enable"]
+            pub const fn crcen(&self) -> super::vals::Ahb4enrGpioaen {
+                let val = (self.0 >> 19usize) & 0x01;
+                super::vals::Ahb4enrGpioaen(val as u8)
             }
-            #[doc = "MCO1 prescaler"]
-            pub fn set_mco1pre(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x0f << 18usize)) | (((val as u32) & 0x0f) << 18usize);
+            #[doc = "CRC peripheral clock enable"]
+            pub fn set_crcen(&mut self, val: super::vals::Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
             }
-            #[doc = "Micro-controller clock output 1"]
-            pub const fn mco1(&self) -> super::vals::Mco1 {
-                let val = (self.0 >> 22usize) & 0x07;
-                super::vals::Mco1(val as u8)
+            #[doc = "BDMA and DMAMUX2 Clock Enable"]
+            pub const fn bdmaen(&self) -> super::vals::Ahb4enrGpioaen {
+                let val = (self.0 >> 21usize) & 0x01;
+                super::vals::Ahb4enrGpioaen(val as u8)
             }
-            #[doc = "Micro-controller clock output 1"]
-            pub fn set_mco1(&mut self, val: super::vals::Mco1) {
-                self.0 = (self.0 & !(0x07 << 22usize)) | (((val.0 as u32) & 0x07) << 22usize);
+            #[doc = "BDMA and DMAMUX2 Clock Enable"]
+            pub fn set_bdmaen(&mut self, val: super::vals::Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
             }
-            #[doc = "MCO2 prescaler"]
-            pub const fn mco2pre(&self) -> u8 {
-                let val = (self.0 >> 25usize) & 0x0f;
-                val as u8
+            #[doc = "ADC3 Peripheral Clocks Enable"]
+            pub const fn adc3en(&self) -> super::vals::Ahb4enrGpioaen {
+                let val = (self.0 >> 24usize) & 0x01;
+                super::vals::Ahb4enrGpioaen(val as u8)
             }
-            #[doc = "MCO2 prescaler"]
-            pub fn set_mco2pre(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x0f << 25usize)) | (((val as u32) & 0x0f) << 25usize);
+            #[doc = "ADC3 Peripheral Clocks Enable"]
+            pub fn set_adc3en(&mut self, val: super::vals::Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
             }
-            #[doc = "Micro-controller clock output 2"]
-            pub const fn mco2(&self) -> super::vals::Mco2 {
-                let val = (self.0 >> 29usize) & 0x07;
-                super::vals::Mco2(val as u8)
+            #[doc = "HSEM peripheral clock enable"]
+            pub const fn hsemen(&self) -> super::vals::Ahb4enrGpioaen {
+                let val = (self.0 >> 25usize) & 0x01;
+                super::vals::Ahb4enrGpioaen(val as u8)
             }
-            #[doc = "Micro-controller clock output 2"]
-            pub fn set_mco2(&mut self, val: super::vals::Mco2) {
-                self.0 = (self.0 & !(0x07 << 29usize)) | (((val.0 as u32) & 0x07) << 29usize);
+            #[doc = "HSEM peripheral clock enable"]
+            pub fn set_hsemen(&mut self, val: super::vals::Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
+            }
+            #[doc = "Backup RAM Clock Enable"]
+            pub const fn bkpramen(&self) -> super::vals::Ahb4enrGpioaen {
+                let val = (self.0 >> 28usize) & 0x01;
+                super::vals::Ahb4enrGpioaen(val as u8)
+            }
+            #[doc = "Backup RAM Clock Enable"]
+            pub fn set_bkpramen(&mut self, val: super::vals::Ahb4enrGpioaen) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
             }
         }
-        impl Default for Cfgr {
-            fn default() -> Cfgr {
-                Cfgr(0)
+        impl Default for Ahb4enr {
+            fn default() -> Ahb4enr {
+                Ahb4enr(0)
+            }
+        }
+        #[doc = "RCC Clock Source Interrupt Clear Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cicr(pub u32);
+        impl Cicr {
+            #[doc = "LSI ready Interrupt Clear"]
+            pub const fn lsirdyc(&self) -> super::vals::Lsirdyc {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Lsirdyc(val as u8)
+            }
+            #[doc = "LSI ready Interrupt Clear"]
+            pub fn set_lsirdyc(&mut self, val: super::vals::Lsirdyc) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "LSE ready Interrupt Clear"]
+            pub const fn lserdyc(&self) -> super::vals::Lsirdyc {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Lsirdyc(val as u8)
+            }
+            #[doc = "LSE ready Interrupt Clear"]
+            pub fn set_lserdyc(&mut self, val: super::vals::Lsirdyc) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "HSI ready Interrupt Clear"]
+            pub const fn hsirdyc(&self) -> super::vals::Lsirdyc {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Lsirdyc(val as u8)
+            }
+            #[doc = "HSI ready Interrupt Clear"]
+            pub fn set_hsirdyc(&mut self, val: super::vals::Lsirdyc) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "HSE ready Interrupt Clear"]
+            pub const fn hserdyc(&self) -> super::vals::Lsirdyc {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Lsirdyc(val as u8)
+            }
+            #[doc = "HSE ready Interrupt Clear"]
+            pub fn set_hserdyc(&mut self, val: super::vals::Lsirdyc) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "CSI ready Interrupt Clear"]
+            pub const fn hse_ready_interrupt_clear(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CSI ready Interrupt Clear"]
+            pub fn set_hse_ready_interrupt_clear(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "RC48 ready Interrupt Clear"]
+            pub const fn hsi48rdyc(&self) -> super::vals::Lsirdyc {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Lsirdyc(val as u8)
+            }
+            #[doc = "RC48 ready Interrupt Clear"]
+            pub fn set_hsi48rdyc(&mut self, val: super::vals::Lsirdyc) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "PLL1 ready Interrupt Clear"]
+            pub fn pllrdyc(&self, n: usize) -> super::vals::Lsirdyc {
+                assert!(n < 3usize);
+                let offs = 6usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Lsirdyc(val as u8)
+            }
+            #[doc = "PLL1 ready Interrupt Clear"]
+            pub fn set_pllrdyc(&mut self, n: usize, val: super::vals::Lsirdyc) {
+                assert!(n < 3usize);
+                let offs = 6usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+            #[doc = "LSE clock security system Interrupt Clear"]
+            pub const fn lsecssc(&self) -> super::vals::Lsirdyc {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Lsirdyc(val as u8)
+            }
+            #[doc = "LSE clock security system Interrupt Clear"]
+            pub fn set_lsecssc(&mut self, val: super::vals::Lsirdyc) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "HSE clock security system Interrupt Clear"]
+            pub const fn hsecssc(&self) -> super::vals::Lsirdyc {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::Lsirdyc(val as u8)
+            }
+            #[doc = "HSE clock security system Interrupt Clear"]
+            pub fn set_hsecssc(&mut self, val: super::vals::Lsirdyc) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+        }
+        impl Default for Cicr {
+            fn default() -> Cicr {
+                Cicr(0)
+            }
+        }
+        #[doc = "RCC APB1 High Sleep Clock Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Apb1hlpenr(pub u32);
+        impl Apb1hlpenr {
+            #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"]
+            pub const fn crslpen(&self) -> super::vals::Apb1hlpenrCrslpen {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Apb1hlpenrCrslpen(val as u8)
+            }
+            #[doc = "Clock Recovery System peripheral clock enable during CSleep mode"]
+            pub fn set_crslpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn swplpen(&self) -> super::vals::Apb1hlpenrCrslpen {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Apb1hlpenrCrslpen(val as u8)
+            }
+            #[doc = "SWPMI Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_swplpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "OPAMP peripheral clock enable during CSleep mode"]
+            pub const fn opamplpen(&self) -> super::vals::Apb1hlpenrCrslpen {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Apb1hlpenrCrslpen(val as u8)
+            }
+            #[doc = "OPAMP peripheral clock enable during CSleep mode"]
+            pub fn set_opamplpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "MDIOS peripheral clock enable during CSleep mode"]
+            pub const fn mdioslpen(&self) -> super::vals::Apb1hlpenrCrslpen {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Apb1hlpenrCrslpen(val as u8)
+            }
+            #[doc = "MDIOS peripheral clock enable during CSleep mode"]
+            pub fn set_mdioslpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"]
+            pub const fn fdcanlpen(&self) -> super::vals::Apb1hlpenrCrslpen {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::Apb1hlpenrCrslpen(val as u8)
+            }
+            #[doc = "FDCAN Peripheral Clocks Enable During CSleep Mode"]
+            pub fn set_fdcanlpen(&mut self, val: super::vals::Apb1hlpenrCrslpen) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+        }
+        impl Default for Apb1hlpenr {
+            fn default() -> Apb1hlpenr {
+                Apb1hlpenr(0)
             }
         }
         #[doc = "RCC APB2 Sleep Clock Register"]
@@ -10381,1765 +9840,134 @@ pub mod rcc_h7 {
                 C1Apb2lpenr(0)
             }
         }
-        #[doc = "clock control register"]
+        #[doc = "RCC PLL1 Dividers Configuration Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr(pub u32);
-        impl Cr {
-            #[doc = "Internal high-speed clock enable"]
-            pub const fn hsion(&self) -> super::vals::Hsion {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Hsion(val as u8)
+        pub struct Pll1divr(pub u32);
+        impl Pll1divr {
+            #[doc = "Multiplication factor for PLL1 VCO"]
+            pub const fn divn1(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x01ff;
+                val as u16
             }
-            #[doc = "Internal high-speed clock enable"]
-            pub fn set_hsion(&mut self, val: super::vals::Hsion) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            #[doc = "Multiplication factor for PLL1 VCO"]
+            pub fn set_divn1(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize);
             }
-            #[doc = "High Speed Internal clock enable in Stop mode"]
-            pub const fn hsikeron(&self) -> super::vals::Hsion {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Hsion(val as u8)
+            #[doc = "PLL1 DIVP division factor"]
+            pub const fn divp1(&self) -> super::vals::Divp1 {
+                let val = (self.0 >> 9usize) & 0x7f;
+                super::vals::Divp1(val as u8)
             }
-            #[doc = "High Speed Internal clock enable in Stop mode"]
-            pub fn set_hsikeron(&mut self, val: super::vals::Hsion) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            #[doc = "PLL1 DIVP division factor"]
+            pub fn set_divp1(&mut self, val: super::vals::Divp1) {
+                self.0 = (self.0 & !(0x7f << 9usize)) | (((val.0 as u32) & 0x7f) << 9usize);
             }
-            #[doc = "HSI clock ready flag"]
-            pub const fn hsirdy(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
+            #[doc = "PLL1 DIVQ division factor"]
+            pub const fn divq1(&self) -> u8 {
+                let val = (self.0 >> 16usize) & 0x7f;
+                val as u8
             }
-            #[doc = "HSI clock ready flag"]
-            pub fn set_hsirdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            #[doc = "PLL1 DIVQ division factor"]
+            pub fn set_divq1(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x7f << 16usize)) | (((val as u32) & 0x7f) << 16usize);
             }
-            #[doc = "HSI clock divider"]
-            pub const fn hsidiv(&self) -> super::vals::Hsidiv {
-                let val = (self.0 >> 3usize) & 0x03;
-                super::vals::Hsidiv(val as u8)
+            #[doc = "PLL1 DIVR division factor"]
+            pub const fn divr1(&self) -> u8 {
+                let val = (self.0 >> 24usize) & 0x7f;
+                val as u8
             }
-            #[doc = "HSI clock divider"]
-            pub fn set_hsidiv(&mut self, val: super::vals::Hsidiv) {
-                self.0 = (self.0 & !(0x03 << 3usize)) | (((val.0 as u32) & 0x03) << 3usize);
-            }
-            #[doc = "HSI divider flag"]
-            pub const fn hsidivf(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "HSI divider flag"]
-            pub fn set_hsidivf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "CSI clock enable"]
-            pub const fn csion(&self) -> super::vals::Hsion {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Hsion(val as u8)
-            }
-            #[doc = "CSI clock enable"]
-            pub fn set_csion(&mut self, val: super::vals::Hsion) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "CSI clock ready flag"]
-            pub const fn csirdy(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CSI clock ready flag"]
-            pub fn set_csirdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "CSI clock enable in Stop mode"]
-            pub const fn csikeron(&self) -> super::vals::Hsion {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Hsion(val as u8)
-            }
-            #[doc = "CSI clock enable in Stop mode"]
-            pub fn set_csikeron(&mut self, val: super::vals::Hsion) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "RC48 clock enable"]
-            pub const fn hsi48on(&self) -> super::vals::Hsion {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Hsion(val as u8)
-            }
-            #[doc = "RC48 clock enable"]
-            pub fn set_hsi48on(&mut self, val: super::vals::Hsion) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "RC48 clock ready flag"]
-            pub const fn hsi48rdy(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
-                val != 0
-            }
-            #[doc = "RC48 clock ready flag"]
-            pub fn set_hsi48rdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
-            }
-            #[doc = "D1 domain clocks ready flag"]
-            pub const fn d1ckrdy(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
-                val != 0
-            }
-            #[doc = "D1 domain clocks ready flag"]
-            pub fn set_d1ckrdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
-            }
-            #[doc = "D2 domain clocks ready flag"]
-            pub const fn d2ckrdy(&self) -> bool {
-                let val = (self.0 >> 15usize) & 0x01;
-                val != 0
-            }
-            #[doc = "D2 domain clocks ready flag"]
-            pub fn set_d2ckrdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
-            }
-            #[doc = "HSE clock enable"]
-            pub const fn hseon(&self) -> super::vals::Hsion {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Hsion(val as u8)
-            }
-            #[doc = "HSE clock enable"]
-            pub fn set_hseon(&mut self, val: super::vals::Hsion) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "HSE clock ready flag"]
-            pub const fn hserdy(&self) -> bool {
-                let val = (self.0 >> 17usize) & 0x01;
-                val != 0
-            }
-            #[doc = "HSE clock ready flag"]
-            pub fn set_hserdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
-            }
-            #[doc = "HSE clock bypass"]
-            pub const fn hsebyp(&self) -> super::vals::Hsebyp {
-                let val = (self.0 >> 18usize) & 0x01;
-                super::vals::Hsebyp(val as u8)
-            }
-            #[doc = "HSE clock bypass"]
-            pub fn set_hsebyp(&mut self, val: super::vals::Hsebyp) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
-            }
-            #[doc = "HSE Clock Security System enable"]
-            pub const fn hsecsson(&self) -> super::vals::Hsion {
-                let val = (self.0 >> 19usize) & 0x01;
-                super::vals::Hsion(val as u8)
-            }
-            #[doc = "HSE Clock Security System enable"]
-            pub fn set_hsecsson(&mut self, val: super::vals::Hsion) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
-            }
-            #[doc = "PLL1 enable"]
-            pub const fn pll1on(&self) -> super::vals::Hsion {
-                let val = (self.0 >> 24usize) & 0x01;
-                super::vals::Hsion(val as u8)
-            }
-            #[doc = "PLL1 enable"]
-            pub fn set_pll1on(&mut self, val: super::vals::Hsion) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
-            }
-            #[doc = "PLL1 clock ready flag"]
-            pub const fn pll1rdy(&self) -> bool {
-                let val = (self.0 >> 25usize) & 0x01;
-                val != 0
-            }
-            #[doc = "PLL1 clock ready flag"]
-            pub fn set_pll1rdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize);
-            }
-            #[doc = "PLL2 enable"]
-            pub const fn pll2on(&self) -> super::vals::Hsion {
-                let val = (self.0 >> 26usize) & 0x01;
-                super::vals::Hsion(val as u8)
-            }
-            #[doc = "PLL2 enable"]
-            pub fn set_pll2on(&mut self, val: super::vals::Hsion) {
-                self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize);
-            }
-            #[doc = "PLL2 clock ready flag"]
-            pub const fn pll2rdy(&self) -> bool {
-                let val = (self.0 >> 27usize) & 0x01;
-                val != 0
-            }
-            #[doc = "PLL2 clock ready flag"]
-            pub fn set_pll2rdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize);
-            }
-            #[doc = "PLL3 enable"]
-            pub const fn pll3on(&self) -> super::vals::Hsion {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::Hsion(val as u8)
-            }
-            #[doc = "PLL3 enable"]
-            pub fn set_pll3on(&mut self, val: super::vals::Hsion) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
-            }
-            #[doc = "PLL3 clock ready flag"]
-            pub const fn pll3rdy(&self) -> bool {
-                let val = (self.0 >> 29usize) & 0x01;
-                val != 0
-            }
-            #[doc = "PLL3 clock ready flag"]
-            pub fn set_pll3rdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize);
+            #[doc = "PLL1 DIVR division factor"]
+            pub fn set_divr1(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x7f << 24usize)) | (((val as u32) & 0x7f) << 24usize);
             }
         }
-        impl Default for Cr {
-            fn default() -> Cr {
-                Cr(0)
+        impl Default for Pll1divr {
+            fn default() -> Pll1divr {
+                Pll1divr(0)
             }
         }
-        #[doc = "RCC AHB3 Reset Register"]
+        #[doc = "RCC AHB2 Clock Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ahb3rstr(pub u32);
-        impl Ahb3rstr {
-            #[doc = "MDMA block reset"]
-            pub const fn mdmarst(&self) -> super::vals::Mdmarst {
+        pub struct Ahb2enr(pub u32);
+        impl Ahb2enr {
+            #[doc = "DCMI peripheral clock"]
+            pub const fn dcmien(&self) -> super::vals::Ahb2enrDcmien {
                 let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Mdmarst(val as u8)
+                super::vals::Ahb2enrDcmien(val as u8)
             }
-            #[doc = "MDMA block reset"]
-            pub fn set_mdmarst(&mut self, val: super::vals::Mdmarst) {
+            #[doc = "DCMI peripheral clock"]
+            pub fn set_dcmien(&mut self, val: super::vals::Ahb2enrDcmien) {
                 self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
             }
-            #[doc = "DMA2D block reset"]
-            pub const fn dma2drst(&self) -> super::vals::Mdmarst {
+            #[doc = "CRYPT peripheral clock enable"]
+            pub const fn crypten(&self) -> super::vals::Ahb2enrDcmien {
                 let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Mdmarst(val as u8)
+                super::vals::Ahb2enrDcmien(val as u8)
             }
-            #[doc = "DMA2D block reset"]
-            pub fn set_dma2drst(&mut self, val: super::vals::Mdmarst) {
+            #[doc = "CRYPT peripheral clock enable"]
+            pub fn set_crypten(&mut self, val: super::vals::Ahb2enrDcmien) {
                 self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
             }
-            #[doc = "JPGDEC block reset"]
-            pub const fn jpgdecrst(&self) -> super::vals::Mdmarst {
+            #[doc = "HASH peripheral clock enable"]
+            pub const fn hashen(&self) -> super::vals::Ahb2enrDcmien {
                 let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Mdmarst(val as u8)
+                super::vals::Ahb2enrDcmien(val as u8)
             }
-            #[doc = "JPGDEC block reset"]
-            pub fn set_jpgdecrst(&mut self, val: super::vals::Mdmarst) {
+            #[doc = "HASH peripheral clock enable"]
+            pub fn set_hashen(&mut self, val: super::vals::Ahb2enrDcmien) {
                 self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
             }
-            #[doc = "FMC block reset"]
-            pub const fn fmcrst(&self) -> super::vals::Mdmarst {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Mdmarst(val as u8)
-            }
-            #[doc = "FMC block reset"]
-            pub fn set_fmcrst(&mut self, val: super::vals::Mdmarst) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "QUADSPI and QUADSPI delay block reset"]
-            pub const fn qspirst(&self) -> super::vals::Mdmarst {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Mdmarst(val as u8)
-            }
-            #[doc = "QUADSPI and QUADSPI delay block reset"]
-            pub fn set_qspirst(&mut self, val: super::vals::Mdmarst) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "SDMMC1 and SDMMC1 delay block reset"]
-            pub const fn sdmmc1rst(&self) -> super::vals::Mdmarst {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Mdmarst(val as u8)
-            }
-            #[doc = "SDMMC1 and SDMMC1 delay block reset"]
-            pub fn set_sdmmc1rst(&mut self, val: super::vals::Mdmarst) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "CPU reset"]
-            pub const fn cpurst(&self) -> super::vals::Mdmarst {
-                let val = (self.0 >> 31usize) & 0x01;
-                super::vals::Mdmarst(val as u8)
-            }
-            #[doc = "CPU reset"]
-            pub fn set_cpurst(&mut self, val: super::vals::Mdmarst) {
-                self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
-            }
-        }
-        impl Default for Ahb3rstr {
-            fn default() -> Ahb3rstr {
-                Ahb3rstr(0)
-            }
-        }
-        #[doc = "RCC APB4 Peripheral Reset Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb4rstr(pub u32);
-        impl Apb4rstr {
-            #[doc = "SYSCFG block reset"]
-            pub const fn syscfgrst(&self) -> super::vals::Syscfgrst {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Syscfgrst(val as u8)
-            }
-            #[doc = "SYSCFG block reset"]
-            pub fn set_syscfgrst(&mut self, val: super::vals::Syscfgrst) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "LPUART1 block reset"]
-            pub const fn lpuart1rst(&self) -> super::vals::Syscfgrst {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Syscfgrst(val as u8)
-            }
-            #[doc = "LPUART1 block reset"]
-            pub fn set_lpuart1rst(&mut self, val: super::vals::Syscfgrst) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "SPI6 block reset"]
-            pub const fn spi6rst(&self) -> super::vals::Syscfgrst {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Syscfgrst(val as u8)
-            }
-            #[doc = "SPI6 block reset"]
-            pub fn set_spi6rst(&mut self, val: super::vals::Syscfgrst) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "I2C4 block reset"]
-            pub const fn i2c4rst(&self) -> super::vals::Syscfgrst {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Syscfgrst(val as u8)
-            }
-            #[doc = "I2C4 block reset"]
-            pub fn set_i2c4rst(&mut self, val: super::vals::Syscfgrst) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "LPTIM2 block reset"]
-            pub const fn lptim2rst(&self) -> super::vals::Syscfgrst {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Syscfgrst(val as u8)
-            }
-            #[doc = "LPTIM2 block reset"]
-            pub fn set_lptim2rst(&mut self, val: super::vals::Syscfgrst) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "LPTIM3 block reset"]
-            pub const fn lptim3rst(&self) -> super::vals::Syscfgrst {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Syscfgrst(val as u8)
-            }
-            #[doc = "LPTIM3 block reset"]
-            pub fn set_lptim3rst(&mut self, val: super::vals::Syscfgrst) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "LPTIM4 block reset"]
-            pub const fn lptim4rst(&self) -> super::vals::Syscfgrst {
-                let val = (self.0 >> 11usize) & 0x01;
-                super::vals::Syscfgrst(val as u8)
-            }
-            #[doc = "LPTIM4 block reset"]
-            pub fn set_lptim4rst(&mut self, val: super::vals::Syscfgrst) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
-            }
-            #[doc = "LPTIM5 block reset"]
-            pub const fn lptim5rst(&self) -> super::vals::Syscfgrst {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Syscfgrst(val as u8)
-            }
-            #[doc = "LPTIM5 block reset"]
-            pub fn set_lptim5rst(&mut self, val: super::vals::Syscfgrst) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "COMP12 Blocks Reset"]
-            pub const fn comp12rst(&self) -> super::vals::Syscfgrst {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Syscfgrst(val as u8)
-            }
-            #[doc = "COMP12 Blocks Reset"]
-            pub fn set_comp12rst(&mut self, val: super::vals::Syscfgrst) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "VREF block reset"]
-            pub const fn vrefrst(&self) -> super::vals::Syscfgrst {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Syscfgrst(val as u8)
-            }
-            #[doc = "VREF block reset"]
-            pub fn set_vrefrst(&mut self, val: super::vals::Syscfgrst) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
-            #[doc = "SAI4 block reset"]
-            pub const fn sai4rst(&self) -> super::vals::Syscfgrst {
-                let val = (self.0 >> 21usize) & 0x01;
-                super::vals::Syscfgrst(val as u8)
-            }
-            #[doc = "SAI4 block reset"]
-            pub fn set_sai4rst(&mut self, val: super::vals::Syscfgrst) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
-            }
-        }
-        impl Default for Apb4rstr {
-            fn default() -> Apb4rstr {
-                Apb4rstr(0)
-            }
-        }
-        #[doc = "RCC AHB2 Sleep Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ahb2lpenr(pub u32);
-        impl Ahb2lpenr {
-            #[doc = "DCMI peripheral clock enable during csleep mode"]
-            pub const fn dcmilpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Ahb2lpenrDcmilpen(val as u8)
-            }
-            #[doc = "DCMI peripheral clock enable during csleep mode"]
-            pub fn set_dcmilpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "CRYPT peripheral clock enable during CSleep mode"]
-            pub const fn cryptlpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Ahb2lpenrDcmilpen(val as u8)
-            }
-            #[doc = "CRYPT peripheral clock enable during CSleep mode"]
-            pub fn set_cryptlpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "HASH peripheral clock enable during CSleep mode"]
-            pub const fn hashlpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Ahb2lpenrDcmilpen(val as u8)
-            }
-            #[doc = "HASH peripheral clock enable during CSleep mode"]
-            pub fn set_hashlpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "RNG peripheral clock enable during CSleep mode"]
-            pub const fn rnglpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
+            #[doc = "RNG peripheral clocks enable"]
+            pub const fn rngen(&self) -> super::vals::Ahb2enrDcmien {
                 let val = (self.0 >> 6usize) & 0x01;
-                super::vals::Ahb2lpenrDcmilpen(val as u8)
+                super::vals::Ahb2enrDcmien(val as u8)
             }
-            #[doc = "RNG peripheral clock enable during CSleep mode"]
-            pub fn set_rnglpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
+            #[doc = "RNG peripheral clocks enable"]
+            pub fn set_rngen(&mut self, val: super::vals::Ahb2enrDcmien) {
                 self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
             }
-            #[doc = "SDMMC2 and SDMMC2 Delay Clock Enable During CSleep Mode"]
-            pub const fn sdmmc2lpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
+            #[doc = "SDMMC2 and SDMMC2 delay clock enable"]
+            pub const fn sdmmc2en(&self) -> super::vals::Ahb2enrDcmien {
                 let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Ahb2lpenrDcmilpen(val as u8)
+                super::vals::Ahb2enrDcmien(val as u8)
             }
-            #[doc = "SDMMC2 and SDMMC2 Delay Clock Enable During CSleep Mode"]
-            pub fn set_sdmmc2lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
+            #[doc = "SDMMC2 and SDMMC2 delay clock enable"]
+            pub fn set_sdmmc2en(&mut self, val: super::vals::Ahb2enrDcmien) {
                 self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
             }
-            #[doc = "SRAM1 Clock Enable During CSleep Mode"]
-            pub const fn sram1lpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
+            #[doc = "SRAM1 block enable"]
+            pub const fn sram1en(&self) -> super::vals::Ahb2enrDcmien {
                 let val = (self.0 >> 29usize) & 0x01;
-                super::vals::Ahb2lpenrDcmilpen(val as u8)
+                super::vals::Ahb2enrDcmien(val as u8)
             }
-            #[doc = "SRAM1 Clock Enable During CSleep Mode"]
-            pub fn set_sram1lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
+            #[doc = "SRAM1 block enable"]
+            pub fn set_sram1en(&mut self, val: super::vals::Ahb2enrDcmien) {
                 self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
             }
-            #[doc = "SRAM2 Clock Enable During CSleep Mode"]
-            pub const fn sram2lpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
+            #[doc = "SRAM2 block enable"]
+            pub const fn sram2en(&self) -> super::vals::Ahb2enrDcmien {
                 let val = (self.0 >> 30usize) & 0x01;
-                super::vals::Ahb2lpenrDcmilpen(val as u8)
+                super::vals::Ahb2enrDcmien(val as u8)
             }
-            #[doc = "SRAM2 Clock Enable During CSleep Mode"]
-            pub fn set_sram2lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
+            #[doc = "SRAM2 block enable"]
+            pub fn set_sram2en(&mut self, val: super::vals::Ahb2enrDcmien) {
                 self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize);
             }
-            #[doc = "SRAM3 Clock Enable During CSleep Mode"]
-            pub const fn sram3lpen(&self) -> super::vals::Ahb2lpenrDcmilpen {
+            #[doc = "SRAM3 block enable"]
+            pub const fn sram3en(&self) -> super::vals::Ahb2enrDcmien {
                 let val = (self.0 >> 31usize) & 0x01;
-                super::vals::Ahb2lpenrDcmilpen(val as u8)
+                super::vals::Ahb2enrDcmien(val as u8)
             }
-            #[doc = "SRAM3 Clock Enable During CSleep Mode"]
-            pub fn set_sram3lpen(&mut self, val: super::vals::Ahb2lpenrDcmilpen) {
+            #[doc = "SRAM3 block enable"]
+            pub fn set_sram3en(&mut self, val: super::vals::Ahb2enrDcmien) {
                 self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
             }
         }
-        impl Default for Ahb2lpenr {
-            fn default() -> Ahb2lpenr {
-                Ahb2lpenr(0)
-            }
-        }
-        #[doc = "RCC Domain 1 Clock Configuration Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct D1cfgr(pub u32);
-        impl D1cfgr {
-            #[doc = "D1 domain AHB prescaler"]
-            pub const fn hpre(&self) -> super::vals::Hpre {
-                let val = (self.0 >> 0usize) & 0x0f;
-                super::vals::Hpre(val as u8)
-            }
-            #[doc = "D1 domain AHB prescaler"]
-            pub fn set_hpre(&mut self, val: super::vals::Hpre) {
-                self.0 = (self.0 & !(0x0f << 0usize)) | (((val.0 as u32) & 0x0f) << 0usize);
-            }
-            #[doc = "D1 domain APB3 prescaler"]
-            pub const fn d1ppre(&self) -> super::vals::D1ppre {
-                let val = (self.0 >> 4usize) & 0x07;
-                super::vals::D1ppre(val as u8)
-            }
-            #[doc = "D1 domain APB3 prescaler"]
-            pub fn set_d1ppre(&mut self, val: super::vals::D1ppre) {
-                self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize);
-            }
-            #[doc = "D1 domain Core prescaler"]
-            pub const fn d1cpre(&self) -> super::vals::Hpre {
-                let val = (self.0 >> 8usize) & 0x0f;
-                super::vals::Hpre(val as u8)
-            }
-            #[doc = "D1 domain Core prescaler"]
-            pub fn set_d1cpre(&mut self, val: super::vals::Hpre) {
-                self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize);
-            }
-        }
-        impl Default for D1cfgr {
-            fn default() -> D1cfgr {
-                D1cfgr(0)
-            }
-        }
-        #[doc = "RCC APB4 Sleep Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb4lpenr(pub u32);
-        impl Apb4lpenr {
-            #[doc = "SYSCFG peripheral clock enable during CSleep mode"]
-            pub const fn syscfglpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Apb4lpenrSyscfglpen(val as u8)
-            }
-            #[doc = "SYSCFG peripheral clock enable during CSleep mode"]
-            pub fn set_syscfglpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn lpuart1lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Apb4lpenrSyscfglpen(val as u8)
-            }
-            #[doc = "LPUART1 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_lpuart1lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn spi6lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Apb4lpenrSyscfglpen(val as u8)
-            }
-            #[doc = "SPI6 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_spi6lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn i2c4lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Apb4lpenrSyscfglpen(val as u8)
-            }
-            #[doc = "I2C4 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_i2c4lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn lptim2lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Apb4lpenrSyscfglpen(val as u8)
-            }
-            #[doc = "LPTIM2 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_lptim2lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn lptim3lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Apb4lpenrSyscfglpen(val as u8)
-            }
-            #[doc = "LPTIM3 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_lptim3lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn lptim4lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 11usize) & 0x01;
-                super::vals::Apb4lpenrSyscfglpen(val as u8)
-            }
-            #[doc = "LPTIM4 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_lptim4lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
-            }
-            #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn lptim5lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Apb4lpenrSyscfglpen(val as u8)
-            }
-            #[doc = "LPTIM5 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_lptim5lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "COMP1/2 peripheral clock enable during CSleep mode"]
-            pub const fn comp12lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Apb4lpenrSyscfglpen(val as u8)
-            }
-            #[doc = "COMP1/2 peripheral clock enable during CSleep mode"]
-            pub fn set_comp12lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "VREF peripheral clock enable during CSleep mode"]
-            pub const fn vreflpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Apb4lpenrSyscfglpen(val as u8)
-            }
-            #[doc = "VREF peripheral clock enable during CSleep mode"]
-            pub fn set_vreflpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
-            #[doc = "RTC APB Clock Enable During CSleep Mode"]
-            pub const fn rtcapblpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Apb4lpenrSyscfglpen(val as u8)
-            }
-            #[doc = "RTC APB Clock Enable During CSleep Mode"]
-            pub fn set_rtcapblpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn sai4lpen(&self) -> super::vals::Apb4lpenrSyscfglpen {
-                let val = (self.0 >> 21usize) & 0x01;
-                super::vals::Apb4lpenrSyscfglpen(val as u8)
-            }
-            #[doc = "SAI4 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_sai4lpen(&mut self, val: super::vals::Apb4lpenrSyscfglpen) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
-            }
-        }
-        impl Default for Apb4lpenr {
-            fn default() -> Apb4lpenr {
-                Apb4lpenr(0)
-            }
-        }
-        #[doc = "RCC PLL3 Fractional Divider Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Pll3fracr(pub u32);
-        impl Pll3fracr {
-            #[doc = "Fractional part of the multiplication factor for PLL3 VCO"]
-            pub const fn fracn3(&self) -> u16 {
-                let val = (self.0 >> 3usize) & 0x1fff;
-                val as u16
-            }
-            #[doc = "Fractional part of the multiplication factor for PLL3 VCO"]
-            pub fn set_fracn3(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x1fff << 3usize)) | (((val as u32) & 0x1fff) << 3usize);
-            }
-        }
-        impl Default for Pll3fracr {
-            fn default() -> Pll3fracr {
-                Pll3fracr(0)
-            }
-        }
-        #[doc = "RCC PLLs Clock Source Selection Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Pllckselr(pub u32);
-        impl Pllckselr {
-            #[doc = "DIVMx and PLLs clock source selection"]
-            pub const fn pllsrc(&self) -> super::vals::Pllsrc {
-                let val = (self.0 >> 0usize) & 0x03;
-                super::vals::Pllsrc(val as u8)
-            }
-            #[doc = "DIVMx and PLLs clock source selection"]
-            pub fn set_pllsrc(&mut self, val: super::vals::Pllsrc) {
-                self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize);
-            }
-            #[doc = "Prescaler for PLL1"]
-            pub fn divm(&self, n: usize) -> u8 {
-                assert!(n < 3usize);
-                let offs = 4usize + n * 8usize;
-                let val = (self.0 >> offs) & 0x3f;
-                val as u8
-            }
-            #[doc = "Prescaler for PLL1"]
-            pub fn set_divm(&mut self, n: usize, val: u8) {
-                assert!(n < 3usize);
-                let offs = 4usize + n * 8usize;
-                self.0 = (self.0 & !(0x3f << offs)) | (((val as u32) & 0x3f) << offs);
-            }
-        }
-        impl Default for Pllckselr {
-            fn default() -> Pllckselr {
-                Pllckselr(0)
-            }
-        }
-        #[doc = "RCC APB3 Sleep Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct C1Apb3lpenr(pub u32);
-        impl C1Apb3lpenr {
-            #[doc = "LTDC peripheral clock enable during CSleep mode"]
-            pub const fn ltdclpen(&self) -> super::vals::C1Apb3lpenrLtdclpen {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::C1Apb3lpenrLtdclpen(val as u8)
-            }
-            #[doc = "LTDC peripheral clock enable during CSleep mode"]
-            pub fn set_ltdclpen(&mut self, val: super::vals::C1Apb3lpenrLtdclpen) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "WWDG1 Clock Enable During CSleep Mode"]
-            pub const fn wwdg1lpen(&self) -> super::vals::C1Apb3lpenrLtdclpen {
-                let val = (self.0 >> 6usize) & 0x01;
-                super::vals::C1Apb3lpenrLtdclpen(val as u8)
-            }
-            #[doc = "WWDG1 Clock Enable During CSleep Mode"]
-            pub fn set_wwdg1lpen(&mut self, val: super::vals::C1Apb3lpenrLtdclpen) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
-            }
-        }
-        impl Default for C1Apb3lpenr {
-            fn default() -> C1Apb3lpenr {
-                C1Apb3lpenr(0)
-            }
-        }
-        #[doc = "RCC AHB1 Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ahb1enr(pub u32);
-        impl Ahb1enr {
-            #[doc = "DMA1 Clock Enable"]
-            pub const fn dma1en(&self) -> super::vals::Ahb1enrDma1en {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "DMA1 Clock Enable"]
-            pub fn set_dma1en(&mut self, val: super::vals::Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "DMA2 Clock Enable"]
-            pub const fn dma2en(&self) -> super::vals::Ahb1enrDma1en {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "DMA2 Clock Enable"]
-            pub fn set_dma2en(&mut self, val: super::vals::Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "ADC1/2 Peripheral Clocks Enable"]
-            pub const fn adc12en(&self) -> super::vals::Ahb1enrDma1en {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "ADC1/2 Peripheral Clocks Enable"]
-            pub fn set_adc12en(&mut self, val: super::vals::Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Ethernet MAC bus interface Clock Enable"]
-            pub const fn eth1macen(&self) -> super::vals::Ahb1enrDma1en {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "Ethernet MAC bus interface Clock Enable"]
-            pub fn set_eth1macen(&mut self, val: super::vals::Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
-            #[doc = "Ethernet Transmission Clock Enable"]
-            pub const fn eth1txen(&self) -> super::vals::Ahb1enrDma1en {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "Ethernet Transmission Clock Enable"]
-            pub fn set_eth1txen(&mut self, val: super::vals::Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "Ethernet Reception Clock Enable"]
-            pub const fn eth1rxen(&self) -> super::vals::Ahb1enrDma1en {
-                let val = (self.0 >> 17usize) & 0x01;
-                super::vals::Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "Ethernet Reception Clock Enable"]
-            pub fn set_eth1rxen(&mut self, val: super::vals::Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
-            }
-            #[doc = "Enable USB_PHY2 clocks"]
-            pub const fn usb2otghsulpien(&self) -> super::vals::Ahb1enrDma1en {
-                let val = (self.0 >> 18usize) & 0x01;
-                super::vals::Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "Enable USB_PHY2 clocks"]
-            pub fn set_usb2otghsulpien(&mut self, val: super::vals::Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
-            }
-            #[doc = "USB1OTG Peripheral Clocks Enable"]
-            pub const fn usb1otgen(&self) -> super::vals::Ahb1enrDma1en {
-                let val = (self.0 >> 25usize) & 0x01;
-                super::vals::Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "USB1OTG Peripheral Clocks Enable"]
-            pub fn set_usb1otgen(&mut self, val: super::vals::Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
-            }
-            #[doc = "USB_PHY1 Clocks Enable"]
-            pub const fn usb1ulpien(&self) -> super::vals::Ahb1enrDma1en {
-                let val = (self.0 >> 26usize) & 0x01;
-                super::vals::Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "USB_PHY1 Clocks Enable"]
-            pub fn set_usb1ulpien(&mut self, val: super::vals::Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize);
-            }
-            #[doc = "USB2OTG Peripheral Clocks Enable"]
-            pub const fn usb2otgen(&self) -> super::vals::Ahb1enrDma1en {
-                let val = (self.0 >> 27usize) & 0x01;
-                super::vals::Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "USB2OTG Peripheral Clocks Enable"]
-            pub fn set_usb2otgen(&mut self, val: super::vals::Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
-            }
-            #[doc = "USB_PHY2 Clocks Enable"]
-            pub const fn usb2ulpien(&self) -> super::vals::Ahb1enrDma1en {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::Ahb1enrDma1en(val as u8)
-            }
-            #[doc = "USB_PHY2 Clocks Enable"]
-            pub fn set_usb2ulpien(&mut self, val: super::vals::Ahb1enrDma1en) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
-            }
-        }
-        impl Default for Ahb1enr {
-            fn default() -> Ahb1enr {
-                Ahb1enr(0)
-            }
-        }
-        #[doc = "RCC D3 Autonomous mode Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct D3amr(pub u32);
-        impl D3amr {
-            #[doc = "BDMA and DMAMUX Autonomous mode enable"]
-            pub const fn bdmaamen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "BDMA and DMAMUX Autonomous mode enable"]
-            pub fn set_bdmaamen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "LPUART1 Autonomous mode enable"]
-            pub const fn lpuart1amen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "LPUART1 Autonomous mode enable"]
-            pub fn set_lpuart1amen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "SPI6 Autonomous mode enable"]
-            pub const fn spi6amen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "SPI6 Autonomous mode enable"]
-            pub fn set_spi6amen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "I2C4 Autonomous mode enable"]
-            pub const fn i2c4amen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "I2C4 Autonomous mode enable"]
-            pub fn set_i2c4amen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "LPTIM2 Autonomous mode enable"]
-            pub const fn lptim2amen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "LPTIM2 Autonomous mode enable"]
-            pub fn set_lptim2amen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "LPTIM3 Autonomous mode enable"]
-            pub const fn lptim3amen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "LPTIM3 Autonomous mode enable"]
-            pub fn set_lptim3amen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "LPTIM4 Autonomous mode enable"]
-            pub const fn lptim4amen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 11usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "LPTIM4 Autonomous mode enable"]
-            pub fn set_lptim4amen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
-            }
-            #[doc = "LPTIM5 Autonomous mode enable"]
-            pub const fn lptim5amen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "LPTIM5 Autonomous mode enable"]
-            pub fn set_lptim5amen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "COMP12 Autonomous mode enable"]
-            pub const fn comp12amen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "COMP12 Autonomous mode enable"]
-            pub fn set_comp12amen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "VREF Autonomous mode enable"]
-            pub const fn vrefamen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "VREF Autonomous mode enable"]
-            pub fn set_vrefamen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
-            #[doc = "RTC Autonomous mode enable"]
-            pub const fn rtcamen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "RTC Autonomous mode enable"]
-            pub fn set_rtcamen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "CRC Autonomous mode enable"]
-            pub const fn crcamen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 19usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "CRC Autonomous mode enable"]
-            pub fn set_crcamen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
-            }
-            #[doc = "SAI4 Autonomous mode enable"]
-            pub const fn sai4amen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 21usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "SAI4 Autonomous mode enable"]
-            pub fn set_sai4amen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
-            }
-            #[doc = "ADC3 Autonomous mode enable"]
-            pub const fn adc3amen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 24usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "ADC3 Autonomous mode enable"]
-            pub fn set_adc3amen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
-            }
-            #[doc = "Backup RAM Autonomous mode enable"]
-            pub const fn bkpramamen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "Backup RAM Autonomous mode enable"]
-            pub fn set_bkpramamen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
-            }
-            #[doc = "SRAM4 Autonomous mode enable"]
-            pub const fn sram4amen(&self) -> super::vals::Bdmaamen {
-                let val = (self.0 >> 29usize) & 0x01;
-                super::vals::Bdmaamen(val as u8)
-            }
-            #[doc = "SRAM4 Autonomous mode enable"]
-            pub fn set_sram4amen(&mut self, val: super::vals::Bdmaamen) {
-                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
-            }
-        }
-        impl Default for D3amr {
-            fn default() -> D3amr {
-                D3amr(0)
-            }
-        }
-        #[doc = "RCC Domain 2 Kernel Clock Configuration Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct D2ccip1r(pub u32);
-        impl D2ccip1r {
-            #[doc = "SAI1 and DFSDM1 kernel Aclk clock source selection"]
-            pub const fn sai1sel(&self) -> super::vals::Sai1sel {
-                let val = (self.0 >> 0usize) & 0x07;
-                super::vals::Sai1sel(val as u8)
-            }
-            #[doc = "SAI1 and DFSDM1 kernel Aclk clock source selection"]
-            pub fn set_sai1sel(&mut self, val: super::vals::Sai1sel) {
-                self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize);
-            }
-            #[doc = "SAI2 and SAI3 kernel clock source selection"]
-            pub const fn sai23sel(&self) -> super::vals::Sai1sel {
-                let val = (self.0 >> 6usize) & 0x07;
-                super::vals::Sai1sel(val as u8)
-            }
-            #[doc = "SAI2 and SAI3 kernel clock source selection"]
-            pub fn set_sai23sel(&mut self, val: super::vals::Sai1sel) {
-                self.0 = (self.0 & !(0x07 << 6usize)) | (((val.0 as u32) & 0x07) << 6usize);
-            }
-            #[doc = "SPI/I2S1,2 and 3 kernel clock source selection"]
-            pub const fn spi123sel(&self) -> super::vals::Sai1sel {
-                let val = (self.0 >> 12usize) & 0x07;
-                super::vals::Sai1sel(val as u8)
-            }
-            #[doc = "SPI/I2S1,2 and 3 kernel clock source selection"]
-            pub fn set_spi123sel(&mut self, val: super::vals::Sai1sel) {
-                self.0 = (self.0 & !(0x07 << 12usize)) | (((val.0 as u32) & 0x07) << 12usize);
-            }
-            #[doc = "SPI4 and 5 kernel clock source selection"]
-            pub const fn spi45sel(&self) -> super::vals::Spi45sel {
-                let val = (self.0 >> 16usize) & 0x07;
-                super::vals::Spi45sel(val as u8)
-            }
-            #[doc = "SPI4 and 5 kernel clock source selection"]
-            pub fn set_spi45sel(&mut self, val: super::vals::Spi45sel) {
-                self.0 = (self.0 & !(0x07 << 16usize)) | (((val.0 as u32) & 0x07) << 16usize);
-            }
-            #[doc = "SPDIFRX kernel clock source selection"]
-            pub const fn spdifsel(&self) -> super::vals::Spdifsel {
-                let val = (self.0 >> 20usize) & 0x03;
-                super::vals::Spdifsel(val as u8)
-            }
-            #[doc = "SPDIFRX kernel clock source selection"]
-            pub fn set_spdifsel(&mut self, val: super::vals::Spdifsel) {
-                self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize);
-            }
-            #[doc = "DFSDM1 kernel Clk clock source selection"]
-            pub const fn dfsdm1sel(&self) -> super::vals::Dfsdm1sel {
-                let val = (self.0 >> 24usize) & 0x01;
-                super::vals::Dfsdm1sel(val as u8)
-            }
-            #[doc = "DFSDM1 kernel Clk clock source selection"]
-            pub fn set_dfsdm1sel(&mut self, val: super::vals::Dfsdm1sel) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
-            }
-            #[doc = "FDCAN kernel clock source selection"]
-            pub const fn fdcansel(&self) -> super::vals::Fdcansel {
-                let val = (self.0 >> 28usize) & 0x03;
-                super::vals::Fdcansel(val as u8)
-            }
-            #[doc = "FDCAN kernel clock source selection"]
-            pub fn set_fdcansel(&mut self, val: super::vals::Fdcansel) {
-                self.0 = (self.0 & !(0x03 << 28usize)) | (((val.0 as u32) & 0x03) << 28usize);
-            }
-            #[doc = "SWPMI kernel clock source selection"]
-            pub const fn swpsel(&self) -> super::vals::Swpsel {
-                let val = (self.0 >> 31usize) & 0x01;
-                super::vals::Swpsel(val as u8)
-            }
-            #[doc = "SWPMI kernel clock source selection"]
-            pub fn set_swpsel(&mut self, val: super::vals::Swpsel) {
-                self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
-            }
-        }
-        impl Default for D2ccip1r {
-            fn default() -> D2ccip1r {
-                D2ccip1r(0)
-            }
-        }
-        #[doc = "RCC APB2 Sleep Clock Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb2lpenr(pub u32);
-        impl Apb2lpenr {
-            #[doc = "TIM1 peripheral clock enable during CSleep mode"]
-            pub const fn tim1lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Apb2lpenrTim1lpen(val as u8)
-            }
-            #[doc = "TIM1 peripheral clock enable during CSleep mode"]
-            pub fn set_tim1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "TIM8 peripheral clock enable during CSleep mode"]
-            pub const fn tim8lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Apb2lpenrTim1lpen(val as u8)
-            }
-            #[doc = "TIM8 peripheral clock enable during CSleep mode"]
-            pub fn set_tim8lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "USART1 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn usart1lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Apb2lpenrTim1lpen(val as u8)
-            }
-            #[doc = "USART1 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_usart1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "USART6 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn usart6lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Apb2lpenrTim1lpen(val as u8)
-            }
-            #[doc = "USART6 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_usart6lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "SPI1 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn spi1lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Apb2lpenrTim1lpen(val as u8)
-            }
-            #[doc = "SPI1 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_spi1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "SPI4 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn spi4lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
-                let val = (self.0 >> 13usize) & 0x01;
-                super::vals::Apb2lpenrTim1lpen(val as u8)
-            }
-            #[doc = "SPI4 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_spi4lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize);
-            }
-            #[doc = "TIM15 peripheral clock enable during CSleep mode"]
-            pub const fn tim15lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Apb2lpenrTim1lpen(val as u8)
-            }
-            #[doc = "TIM15 peripheral clock enable during CSleep mode"]
-            pub fn set_tim15lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "TIM16 peripheral clock enable during CSleep mode"]
-            pub const fn tim16lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
-                let val = (self.0 >> 17usize) & 0x01;
-                super::vals::Apb2lpenrTim1lpen(val as u8)
-            }
-            #[doc = "TIM16 peripheral clock enable during CSleep mode"]
-            pub fn set_tim16lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
-            }
-            #[doc = "TIM17 peripheral clock enable during CSleep mode"]
-            pub const fn tim17lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
-                let val = (self.0 >> 18usize) & 0x01;
-                super::vals::Apb2lpenrTim1lpen(val as u8)
-            }
-            #[doc = "TIM17 peripheral clock enable during CSleep mode"]
-            pub fn set_tim17lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
-            }
-            #[doc = "SPI5 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn spi5lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
-                let val = (self.0 >> 20usize) & 0x01;
-                super::vals::Apb2lpenrTim1lpen(val as u8)
-            }
-            #[doc = "SPI5 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_spi5lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize);
-            }
-            #[doc = "SAI1 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn sai1lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
-                let val = (self.0 >> 22usize) & 0x01;
-                super::vals::Apb2lpenrTim1lpen(val as u8)
-            }
-            #[doc = "SAI1 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_sai1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
-            }
-            #[doc = "SAI2 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn sai2lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
-                let val = (self.0 >> 23usize) & 0x01;
-                super::vals::Apb2lpenrTim1lpen(val as u8)
-            }
-            #[doc = "SAI2 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_sai2lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
-                self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize);
-            }
-            #[doc = "SAI3 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn sai3lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
-                let val = (self.0 >> 24usize) & 0x01;
-                super::vals::Apb2lpenrTim1lpen(val as u8)
-            }
-            #[doc = "SAI3 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_sai3lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
-            }
-            #[doc = "DFSDM1 Peripheral Clocks Enable During CSleep Mode"]
-            pub const fn dfsdm1lpen(&self) -> super::vals::Apb2lpenrTim1lpen {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::Apb2lpenrTim1lpen(val as u8)
-            }
-            #[doc = "DFSDM1 Peripheral Clocks Enable During CSleep Mode"]
-            pub fn set_dfsdm1lpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
-            }
-            #[doc = "HRTIM peripheral clock enable during CSleep mode"]
-            pub const fn hrtimlpen(&self) -> super::vals::Apb2lpenrTim1lpen {
-                let val = (self.0 >> 29usize) & 0x01;
-                super::vals::Apb2lpenrTim1lpen(val as u8)
-            }
-            #[doc = "HRTIM peripheral clock enable during CSleep mode"]
-            pub fn set_hrtimlpen(&mut self, val: super::vals::Apb2lpenrTim1lpen) {
-                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
-            }
-        }
-        impl Default for Apb2lpenr {
-            fn default() -> Apb2lpenr {
-                Apb2lpenr(0)
-            }
-        }
-    }
-}
-pub mod syscfg_f4 {
-    use crate::generic::*;
-    #[doc = "System configuration controller"]
-    #[derive(Copy, Clone)]
-    pub struct Syscfg(pub *mut u8);
-    unsafe impl Send for Syscfg {}
-    unsafe impl Sync for Syscfg {}
-    impl Syscfg {
-        #[doc = "memory remap register"]
-        pub fn memrm(self) -> Reg<regs::Memrm, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "peripheral mode configuration register"]
-        pub fn pmc(self) -> Reg<regs::Pmc, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "external interrupt configuration register"]
-        pub fn exticr(self, n: usize) -> Reg<regs::Exticr, RW> {
-            assert!(n < 4usize);
-            unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) }
-        }
-        #[doc = "Compensation cell control register"]
-        pub fn cmpcr(self) -> Reg<regs::Cmpcr, R> {
-            unsafe { Reg::from_ptr(self.0.add(32usize)) }
-        }
-    }
-    pub mod regs {
-        use crate::generic::*;
-        #[doc = "memory remap register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Memrm(pub u32);
-        impl Memrm {
-            #[doc = "Memory mapping selection"]
-            pub const fn mem_mode(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0x07;
-                val as u8
-            }
-            #[doc = "Memory mapping selection"]
-            pub fn set_mem_mode(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x07 << 0usize)) | (((val as u32) & 0x07) << 0usize);
-            }
-            #[doc = "Flash bank mode selection"]
-            pub const fn fb_mode(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Flash bank mode selection"]
-            pub fn set_fb_mode(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "FMC memory mapping swap"]
-            pub const fn swp_fmc(&self) -> u8 {
-                let val = (self.0 >> 10usize) & 0x03;
-                val as u8
-            }
-            #[doc = "FMC memory mapping swap"]
-            pub fn set_swp_fmc(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 10usize)) | (((val as u32) & 0x03) << 10usize);
-            }
-        }
-        impl Default for Memrm {
-            fn default() -> Memrm {
-                Memrm(0)
-            }
-        }
-        #[doc = "Compensation cell control register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cmpcr(pub u32);
-        impl Cmpcr {
-            #[doc = "Compensation cell power-down"]
-            pub const fn cmp_pd(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Compensation cell power-down"]
-            pub fn set_cmp_pd(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "READY"]
-            pub const fn ready(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "READY"]
-            pub fn set_ready(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-        }
-        impl Default for Cmpcr {
-            fn default() -> Cmpcr {
-                Cmpcr(0)
-            }
-        }
-        #[doc = "peripheral mode configuration register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Pmc(pub u32);
-        impl Pmc {
-            #[doc = "ADC1DC2"]
-            pub const fn adc1dc2(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "ADC1DC2"]
-            pub fn set_adc1dc2(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
-            #[doc = "ADC2DC2"]
-            pub const fn adc2dc2(&self) -> bool {
-                let val = (self.0 >> 17usize) & 0x01;
-                val != 0
-            }
-            #[doc = "ADC2DC2"]
-            pub fn set_adc2dc2(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
-            }
-            #[doc = "ADC3DC2"]
-            pub const fn adc3dc2(&self) -> bool {
-                let val = (self.0 >> 18usize) & 0x01;
-                val != 0
-            }
-            #[doc = "ADC3DC2"]
-            pub fn set_adc3dc2(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize);
-            }
-            #[doc = "Ethernet PHY interface selection"]
-            pub const fn mii_rmii_sel(&self) -> bool {
-                let val = (self.0 >> 23usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Ethernet PHY interface selection"]
-            pub fn set_mii_rmii_sel(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
-            }
-        }
-        impl Default for Pmc {
-            fn default() -> Pmc {
-                Pmc(0)
-            }
-        }
-        #[doc = "external interrupt configuration register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Exticr(pub u32);
-        impl Exticr {
-            #[doc = "EXTI x configuration"]
-            pub fn exti(&self, n: usize) -> u8 {
-                assert!(n < 4usize);
-                let offs = 0usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x0f;
-                val as u8
-            }
-            #[doc = "EXTI x configuration"]
-            pub fn set_exti(&mut self, n: usize, val: u8) {
-                assert!(n < 4usize);
-                let offs = 0usize + n * 4usize;
-                self.0 = (self.0 & !(0x0f << offs)) | (((val as u32) & 0x0f) << offs);
-            }
-        }
-        impl Default for Exticr {
-            fn default() -> Exticr {
-                Exticr(0)
-            }
-        }
-    }
-}
-pub mod dma_v2 {
-    use crate::generic::*;
-    #[doc = "Stream cluster: S?CR, S?NDTR, S?M0AR, S?M1AR and S?FCR registers"]
-    #[derive(Copy, Clone)]
-    pub struct St(pub *mut u8);
-    unsafe impl Send for St {}
-    unsafe impl Sync for St {}
-    impl St {
-        #[doc = "stream x configuration register"]
-        pub fn cr(self) -> Reg<regs::Cr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "stream x number of data register"]
-        pub fn ndtr(self) -> Reg<regs::Ndtr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "stream x peripheral address register"]
-        pub fn par(self) -> Reg<u32, RW> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
-        }
-        #[doc = "stream x memory 0 address register"]
-        pub fn m0ar(self) -> Reg<u32, RW> {
-            unsafe { Reg::from_ptr(self.0.add(12usize)) }
-        }
-        #[doc = "stream x memory 1 address register"]
-        pub fn m1ar(self) -> Reg<u32, RW> {
-            unsafe { Reg::from_ptr(self.0.add(16usize)) }
-        }
-        #[doc = "stream x FIFO control register"]
-        pub fn fcr(self) -> Reg<regs::Fcr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(20usize)) }
-        }
-    }
-    #[doc = "DMA controller"]
-    #[derive(Copy, Clone)]
-    pub struct Dma(pub *mut u8);
-    unsafe impl Send for Dma {}
-    unsafe impl Sync for Dma {}
-    impl Dma {
-        #[doc = "low interrupt status register"]
-        pub fn isr(self, n: usize) -> Reg<regs::Ixr, R> {
-            assert!(n < 2usize);
-            unsafe { Reg::from_ptr(self.0.add(0usize + n * 4usize)) }
-        }
-        #[doc = "low interrupt flag clear register"]
-        pub fn ifcr(self, n: usize) -> Reg<regs::Ixr, W> {
-            assert!(n < 2usize);
-            unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) }
-        }
-        #[doc = "Stream cluster: S?CR, S?NDTR, S?M0AR, S?M1AR and S?FCR registers"]
-        pub fn st(self, n: usize) -> St {
-            assert!(n < 8usize);
-            unsafe { St(self.0.add(16usize + n * 24usize)) }
-        }
-    }
-    pub mod regs {
-        use crate::generic::*;
-        #[doc = "stream x configuration register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr(pub u32);
-        impl Cr {
-            #[doc = "Stream enable / flag stream ready when read low"]
-            pub const fn en(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Stream enable / flag stream ready when read low"]
-            pub fn set_en(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Direct mode error interrupt enable"]
-            pub const fn dmeie(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Direct mode error interrupt enable"]
-            pub fn set_dmeie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Transfer error interrupt enable"]
-            pub const fn teie(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transfer error interrupt enable"]
-            pub fn set_teie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Half transfer interrupt enable"]
-            pub const fn htie(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Half transfer interrupt enable"]
-            pub fn set_htie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Transfer complete interrupt enable"]
-            pub const fn tcie(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transfer complete interrupt enable"]
-            pub fn set_tcie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Peripheral flow controller"]
-            pub const fn pfctrl(&self) -> super::vals::Pfctrl {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Pfctrl(val as u8)
-            }
-            #[doc = "Peripheral flow controller"]
-            pub fn set_pfctrl(&mut self, val: super::vals::Pfctrl) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Data transfer direction"]
-            pub const fn dir(&self) -> super::vals::Dir {
-                let val = (self.0 >> 6usize) & 0x03;
-                super::vals::Dir(val as u8)
-            }
-            #[doc = "Data transfer direction"]
-            pub fn set_dir(&mut self, val: super::vals::Dir) {
-                self.0 = (self.0 & !(0x03 << 6usize)) | (((val.0 as u32) & 0x03) << 6usize);
-            }
-            #[doc = "Circular mode"]
-            pub const fn circ(&self) -> super::vals::Circ {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::Circ(val as u8)
-            }
-            #[doc = "Circular mode"]
-            pub fn set_circ(&mut self, val: super::vals::Circ) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Peripheral increment mode"]
-            pub const fn pinc(&self) -> super::vals::Inc {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Inc(val as u8)
-            }
-            #[doc = "Peripheral increment mode"]
-            pub fn set_pinc(&mut self, val: super::vals::Inc) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "Memory increment mode"]
-            pub const fn minc(&self) -> super::vals::Inc {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Inc(val as u8)
-            }
-            #[doc = "Memory increment mode"]
-            pub fn set_minc(&mut self, val: super::vals::Inc) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "Peripheral data size"]
-            pub const fn psize(&self) -> super::vals::Size {
-                let val = (self.0 >> 11usize) & 0x03;
-                super::vals::Size(val as u8)
-            }
-            #[doc = "Peripheral data size"]
-            pub fn set_psize(&mut self, val: super::vals::Size) {
-                self.0 = (self.0 & !(0x03 << 11usize)) | (((val.0 as u32) & 0x03) << 11usize);
-            }
-            #[doc = "Memory data size"]
-            pub const fn msize(&self) -> super::vals::Size {
-                let val = (self.0 >> 13usize) & 0x03;
-                super::vals::Size(val as u8)
-            }
-            #[doc = "Memory data size"]
-            pub fn set_msize(&mut self, val: super::vals::Size) {
-                self.0 = (self.0 & !(0x03 << 13usize)) | (((val.0 as u32) & 0x03) << 13usize);
-            }
-            #[doc = "Peripheral increment offset size"]
-            pub const fn pincos(&self) -> super::vals::Pincos {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Pincos(val as u8)
-            }
-            #[doc = "Peripheral increment offset size"]
-            pub fn set_pincos(&mut self, val: super::vals::Pincos) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
-            #[doc = "Priority level"]
-            pub const fn pl(&self) -> super::vals::Pl {
-                let val = (self.0 >> 16usize) & 0x03;
-                super::vals::Pl(val as u8)
-            }
-            #[doc = "Priority level"]
-            pub fn set_pl(&mut self, val: super::vals::Pl) {
-                self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize);
-            }
-            #[doc = "Double buffer mode"]
-            pub const fn dbm(&self) -> super::vals::Dbm {
-                let val = (self.0 >> 18usize) & 0x01;
-                super::vals::Dbm(val as u8)
-            }
-            #[doc = "Double buffer mode"]
-            pub fn set_dbm(&mut self, val: super::vals::Dbm) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
-            }
-            #[doc = "Current target (only in double buffer mode)"]
-            pub const fn ct(&self) -> super::vals::Ct {
-                let val = (self.0 >> 19usize) & 0x01;
-                super::vals::Ct(val as u8)
-            }
-            #[doc = "Current target (only in double buffer mode)"]
-            pub fn set_ct(&mut self, val: super::vals::Ct) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
-            }
-            #[doc = "Peripheral burst transfer configuration"]
-            pub const fn pburst(&self) -> super::vals::Burst {
-                let val = (self.0 >> 21usize) & 0x03;
-                super::vals::Burst(val as u8)
-            }
-            #[doc = "Peripheral burst transfer configuration"]
-            pub fn set_pburst(&mut self, val: super::vals::Burst) {
-                self.0 = (self.0 & !(0x03 << 21usize)) | (((val.0 as u32) & 0x03) << 21usize);
-            }
-            #[doc = "Memory burst transfer configuration"]
-            pub const fn mburst(&self) -> super::vals::Burst {
-                let val = (self.0 >> 23usize) & 0x03;
-                super::vals::Burst(val as u8)
-            }
-            #[doc = "Memory burst transfer configuration"]
-            pub fn set_mburst(&mut self, val: super::vals::Burst) {
-                self.0 = (self.0 & !(0x03 << 23usize)) | (((val.0 as u32) & 0x03) << 23usize);
-            }
-            #[doc = "Channel selection"]
-            pub const fn chsel(&self) -> u8 {
-                let val = (self.0 >> 25usize) & 0x0f;
-                val as u8
-            }
-            #[doc = "Channel selection"]
-            pub fn set_chsel(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x0f << 25usize)) | (((val as u32) & 0x0f) << 25usize);
-            }
-        }
-        impl Default for Cr {
-            fn default() -> Cr {
-                Cr(0)
-            }
-        }
-        #[doc = "stream x number of data register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ndtr(pub u32);
-        impl Ndtr {
-            #[doc = "Number of data items to transfer"]
-            pub const fn ndt(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "Number of data items to transfer"]
-            pub fn set_ndt(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
-        }
-        impl Default for Ndtr {
-            fn default() -> Ndtr {
-                Ndtr(0)
-            }
-        }
-        #[doc = "stream x FIFO control register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Fcr(pub u32);
-        impl Fcr {
-            #[doc = "FIFO threshold selection"]
-            pub const fn fth(&self) -> super::vals::Fth {
-                let val = (self.0 >> 0usize) & 0x03;
-                super::vals::Fth(val as u8)
-            }
-            #[doc = "FIFO threshold selection"]
-            pub fn set_fth(&mut self, val: super::vals::Fth) {
-                self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize);
-            }
-            #[doc = "Direct mode disable"]
-            pub const fn dmdis(&self) -> super::vals::Dmdis {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Dmdis(val as u8)
-            }
-            #[doc = "Direct mode disable"]
-            pub fn set_dmdis(&mut self, val: super::vals::Dmdis) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "FIFO status"]
-            pub const fn fs(&self) -> super::vals::Fs {
-                let val = (self.0 >> 3usize) & 0x07;
-                super::vals::Fs(val as u8)
-            }
-            #[doc = "FIFO status"]
-            pub fn set_fs(&mut self, val: super::vals::Fs) {
-                self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize);
-            }
-            #[doc = "FIFO error interrupt enable"]
-            pub const fn feie(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "FIFO error interrupt enable"]
-            pub fn set_feie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-        }
-        impl Default for Fcr {
-            fn default() -> Fcr {
-                Fcr(0)
-            }
-        }
-        #[doc = "interrupt register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ixr(pub u32);
-        impl Ixr {
-            #[doc = "Stream x FIFO error interrupt flag (x=3..0)"]
-            pub fn feif(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 0usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Stream x FIFO error interrupt flag (x=3..0)"]
-            pub fn set_feif(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 0usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Stream x direct mode error interrupt flag (x=3..0)"]
-            pub fn dmeif(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 2usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Stream x direct mode error interrupt flag (x=3..0)"]
-            pub fn set_dmeif(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 2usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Stream x transfer error interrupt flag (x=3..0)"]
-            pub fn teif(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 3usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Stream x transfer error interrupt flag (x=3..0)"]
-            pub fn set_teif(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 3usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Stream x half transfer interrupt flag (x=3..0)"]
-            pub fn htif(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 4usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Stream x half transfer interrupt flag (x=3..0)"]
-            pub fn set_htif(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 4usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Stream x transfer complete interrupt flag (x = 3..0)"]
-            pub fn tcif(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 5usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Stream x transfer complete interrupt flag (x = 3..0)"]
-            pub fn set_tcif(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 5usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Ixr {
-            fn default() -> Ixr {
-                Ixr(0)
+        impl Default for Ahb2enr {
+            fn default() -> Ahb2enr {
+                Ahb2enr(0)
             }
         }
     }
@@ -12147,820 +9975,1253 @@ pub mod dma_v2 {
         use crate::generic::*;
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Dbm(pub u8);
-        impl Dbm {
-            #[doc = "No buffer switching at the end of transfer"]
+        pub struct Mco2(pub u8);
+        impl Mco2 {
+            #[doc = "System clock selected for micro-controller clock output"]
+            pub const SYSCLK: Self = Self(0);
+            #[doc = "pll2_p selected for micro-controller clock output"]
+            pub const PLL2_P: Self = Self(0x01);
+            #[doc = "HSE selected for micro-controller clock output"]
+            pub const HSE: Self = Self(0x02);
+            #[doc = "pll1_p selected for micro-controller clock output"]
+            pub const PLL1_P: Self = Self(0x03);
+            #[doc = "CSI selected for micro-controller clock output"]
+            pub const CSI: Self = Self(0x04);
+            #[doc = "LSI selected for micro-controller clock output"]
+            pub const LSI: Self = Self(0x05);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct C1Apb1lenrTim2en(pub u8);
+        impl C1Apb1lenrTim2en {
+            #[doc = "The selected clock is disabled"]
             pub const DISABLED: Self = Self(0);
-            #[doc = "Memory target switched at the end of the DMA transfer"]
+            #[doc = "The selected clock is enabled"]
             pub const ENABLED: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Dmdis(pub u8);
-        impl Dmdis {
-            #[doc = "Direct mode is enabled"]
-            pub const ENABLED: Self = Self(0);
-            #[doc = "Direct mode is disabled"]
-            pub const DISABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Burst(pub u8);
-        impl Burst {
-            #[doc = "Single transfer"]
-            pub const SINGLE: Self = Self(0);
-            #[doc = "Incremental burst of 4 beats"]
-            pub const INCR4: Self = Self(0x01);
-            #[doc = "Incremental burst of 8 beats"]
-            pub const INCR8: Self = Self(0x02);
-            #[doc = "Incremental burst of 16 beats"]
-            pub const INCR16: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Pl(pub u8);
-        impl Pl {
-            #[doc = "Low"]
-            pub const LOW: Self = Self(0);
-            #[doc = "Medium"]
-            pub const MEDIUM: Self = Self(0x01);
-            #[doc = "High"]
-            pub const HIGH: Self = Self(0x02);
-            #[doc = "Very high"]
-            pub const VERYHIGH: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Pincos(pub u8);
-        impl Pincos {
-            #[doc = "The offset size for the peripheral address calculation is linked to the PSIZE"]
-            pub const PSIZE: Self = Self(0);
-            #[doc = "The offset size for the peripheral address calculation is fixed to 4 (32-bit alignment)"]
-            pub const FIXED4: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Inc(pub u8);
-        impl Inc {
-            #[doc = "Address pointer is fixed"]
-            pub const FIXED: Self = Self(0);
-            #[doc = "Address pointer is incremented after each data transfer"]
-            pub const INCREMENTED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Fs(pub u8);
-        impl Fs {
-            #[doc = "0 < fifo_level < 1/4"]
-            pub const QUARTER1: Self = Self(0);
-            #[doc = "1/4 <= fifo_level < 1/2"]
-            pub const QUARTER2: Self = Self(0x01);
-            #[doc = "1/2 <= fifo_level < 3/4"]
-            pub const QUARTER3: Self = Self(0x02);
-            #[doc = "3/4 <= fifo_level < full"]
-            pub const QUARTER4: Self = Self(0x03);
-            #[doc = "FIFO is empty"]
-            pub const EMPTY: Self = Self(0x04);
-            #[doc = "FIFO is full"]
-            pub const FULL: Self = Self(0x05);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Size(pub u8);
-        impl Size {
-            #[doc = "Byte (8-bit)"]
-            pub const BITS8: Self = Self(0);
-            #[doc = "Half-word (16-bit)"]
-            pub const BITS16: Self = Self(0x01);
-            #[doc = "Word (32-bit)"]
-            pub const BITS32: Self = Self(0x02);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Pfctrl(pub u8);
-        impl Pfctrl {
-            #[doc = "The DMA is the flow controller"]
-            pub const DMA: Self = Self(0);
-            #[doc = "The peripheral is the flow controller"]
-            pub const PERIPHERAL: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ct(pub u8);
-        impl Ct {
-            #[doc = "The current target memory is Memory 0"]
-            pub const MEMORY0: Self = Self(0);
-            #[doc = "The current target memory is Memory 1"]
-            pub const MEMORY1: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Fth(pub u8);
-        impl Fth {
-            #[doc = "1/4 full FIFO"]
-            pub const QUARTER: Self = Self(0);
-            #[doc = "1/2 full FIFO"]
-            pub const HALF: Self = Self(0x01);
-            #[doc = "3/4 full FIFO"]
-            pub const THREEQUARTERS: Self = Self(0x02);
-            #[doc = "Full FIFO"]
-            pub const FULL: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Dir(pub u8);
-        impl Dir {
-            #[doc = "Peripheral-to-memory"]
-            pub const PERIPHERALTOMEMORY: Self = Self(0);
-            #[doc = "Memory-to-peripheral"]
-            pub const MEMORYTOPERIPHERAL: Self = Self(0x01);
-            #[doc = "Memory-to-memory"]
-            pub const MEMORYTOMEMORY: Self = Self(0x02);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Circ(pub u8);
-        impl Circ {
-            #[doc = "Circular mode disabled"]
+        pub struct C1Ahb4enrGpioaen(pub u8);
+        impl C1Ahb4enrGpioaen {
+            #[doc = "The selected clock is disabled"]
             pub const DISABLED: Self = Self(0);
-            #[doc = "Circular mode enabled"]
+            #[doc = "The selected clock is enabled"]
             pub const ENABLED: Self = Self(0x01);
         }
-    }
-}
-pub mod spi_v2 {
-    use crate::generic::*;
-    #[doc = "Serial peripheral interface"]
-    #[derive(Copy, Clone)]
-    pub struct Spi(pub *mut u8);
-    unsafe impl Send for Spi {}
-    unsafe impl Sync for Spi {}
-    impl Spi {
-        #[doc = "control register 1"]
-        pub fn cr1(self) -> Reg<regs::Cr1, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "control register 2"]
-        pub fn cr2(self) -> Reg<regs::Cr2, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "status register"]
-        pub fn sr(self) -> Reg<regs::Sr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
-        }
-        #[doc = "data register"]
-        pub fn dr(self) -> Reg<regs::Dr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(12usize)) }
-        }
-        #[doc = "CRC polynomial register"]
-        pub fn crcpr(self) -> Reg<regs::Crcpr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(16usize)) }
-        }
-        #[doc = "RX CRC register"]
-        pub fn rxcrcr(self) -> Reg<regs::Rxcrcr, R> {
-            unsafe { Reg::from_ptr(self.0.add(20usize)) }
-        }
-        #[doc = "TX CRC register"]
-        pub fn txcrcr(self) -> Reg<regs::Txcrcr, R> {
-            unsafe { Reg::from_ptr(self.0.add(24usize)) }
-        }
-    }
-    pub mod vals {
-        use crate::generic::*;
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Br(pub u8);
-        impl Br {
-            #[doc = "f_PCLK / 2"]
-            pub const DIV2: Self = Self(0);
-            #[doc = "f_PCLK / 4"]
-            pub const DIV4: Self = Self(0x01);
-            #[doc = "f_PCLK / 8"]
-            pub const DIV8: Self = Self(0x02);
-            #[doc = "f_PCLK / 16"]
-            pub const DIV16: Self = Self(0x03);
-            #[doc = "f_PCLK / 32"]
-            pub const DIV32: Self = Self(0x04);
-            #[doc = "f_PCLK / 64"]
-            pub const DIV64: Self = Self(0x05);
-            #[doc = "f_PCLK / 128"]
-            pub const DIV128: Self = Self(0x06);
-            #[doc = "f_PCLK / 256"]
-            pub const DIV256: Self = Self(0x07);
+        pub struct RsrCpurstfr(pub u8);
+        impl RsrCpurstfr {
+            #[doc = "No reset occoured for block"]
+            pub const NORESETOCCOURED: Self = Self(0);
+            #[doc = "Reset occoured for block"]
+            pub const RESETOCCOURRED: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lsbfirst(pub u8);
-        impl Lsbfirst {
-            #[doc = "Data is transmitted/received with the MSB first"]
-            pub const MSBFIRST: Self = Self(0);
-            #[doc = "Data is transmitted/received with the LSB first"]
-            pub const LSBFIRST: Self = Self(0x01);
+        pub struct Ww1rsc(pub u8);
+        impl Ww1rsc {
+            #[doc = "Clear WWDG1 scope control"]
+            pub const CLEAR: Self = Self(0);
+            #[doc = "Set WWDG1 scope control"]
+            pub const SET: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct LdmaRx(pub u8);
-        impl LdmaRx {
-            #[doc = "Number of data to transfer for receive is even"]
-            pub const EVEN: Self = Self(0);
-            #[doc = "Number of data to transfer for receive is odd"]
-            pub const ODD: Self = Self(0x01);
+        pub struct Hsion(pub u8);
+        impl Hsion {
+            #[doc = "Clock Off"]
+            pub const OFF: Self = Self(0);
+            #[doc = "Clock On"]
+            pub const ON: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Cpol(pub u8);
-        impl Cpol {
-            #[doc = "CK to 0 when idle"]
-            pub const IDLELOW: Self = Self(0);
-            #[doc = "CK to 1 when idle"]
-            pub const IDLEHIGH: Self = Self(0x01);
+        pub struct C1Ahb3enrMdmaen(pub u8);
+        impl C1Ahb3enrMdmaen {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Mstr(pub u8);
-        impl Mstr {
-            #[doc = "Slave configuration"]
-            pub const SLAVE: Self = Self(0);
-            #[doc = "Master configuration"]
-            pub const MASTER: Self = Self(0x01);
+        pub struct Lptim1sel(pub u8);
+        impl Lptim1sel {
+            #[doc = "rcc_pclk1 selected as peripheral clock"]
+            pub const RCC_PCLK1: Self = Self(0);
+            #[doc = "pll2_p selected as peripheral clock"]
+            pub const PLL2_P: Self = Self(0x01);
+            #[doc = "pll3_r selected as peripheral clock"]
+            pub const PLL3_R: Self = Self(0x02);
+            #[doc = "LSE selected as peripheral clock"]
+            pub const LSE: Self = Self(0x03);
+            #[doc = "LSI selected as peripheral clock"]
+            pub const LSI: Self = Self(0x04);
+            #[doc = "PER selected as peripheral clock"]
+            pub const PER: Self = Self(0x05);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Cpha(pub u8);
-        impl Cpha {
-            #[doc = "The first clock transition is the first data capture edge"]
-            pub const FIRSTEDGE: Self = Self(0);
-            #[doc = "The second clock transition is the first data capture edge"]
-            pub const SECONDEDGE: Self = Self(0x01);
+        pub struct Hsidiv(pub u8);
+        impl Hsidiv {
+            #[doc = "No division"]
+            pub const DIV1: Self = Self(0);
+            #[doc = "Division by 2"]
+            pub const DIV2: Self = Self(0x01);
+            #[doc = "Division by 4"]
+            pub const DIV4: Self = Self(0x02);
+            #[doc = "Division by 8"]
+            pub const DIV8: Self = Self(0x03);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ftlvlr(pub u8);
-        impl Ftlvlr {
-            #[doc = "Tx FIFO Empty"]
-            pub const EMPTY: Self = Self(0);
-            #[doc = "Tx 1/4 FIFO"]
-            pub const QUARTER: Self = Self(0x01);
-            #[doc = "Tx 1/2 FIFO"]
-            pub const HALF: Self = Self(0x02);
-            #[doc = "Tx FIFO full"]
-            pub const FULL: Self = Self(0x03);
+        pub struct Hpre(pub u8);
+        impl Hpre {
+            #[doc = "sys_ck not divided"]
+            pub const DIV1: Self = Self(0);
+            #[doc = "sys_ck divided by 2"]
+            pub const DIV2: Self = Self(0x08);
+            #[doc = "sys_ck divided by 4"]
+            pub const DIV4: Self = Self(0x09);
+            #[doc = "sys_ck divided by 8"]
+            pub const DIV8: Self = Self(0x0a);
+            #[doc = "sys_ck divided by 16"]
+            pub const DIV16: Self = Self(0x0b);
+            #[doc = "sys_ck divided by 64"]
+            pub const DIV64: Self = Self(0x0c);
+            #[doc = "sys_ck divided by 128"]
+            pub const DIV128: Self = Self(0x0d);
+            #[doc = "sys_ck divided by 256"]
+            pub const DIV256: Self = Self(0x0e);
+            #[doc = "sys_ck divided by 512"]
+            pub const DIV512: Self = Self(0x0f);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Crcl(pub u8);
-        impl Crcl {
-            #[doc = "8-bit CRC length"]
-            pub const EIGHTBIT: Self = Self(0);
-            #[doc = "16-bit CRC length"]
-            pub const SIXTEENBIT: Self = Self(0x01);
+        pub struct Ahb3enrMdmaen(pub u8);
+        impl Ahb3enrMdmaen {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Crcnext(pub u8);
-        impl Crcnext {
-            #[doc = "Next transmit value is from Tx buffer"]
-            pub const TXBUFFER: Self = Self(0);
-            #[doc = "Next transmit value is from Tx CRC register"]
-            pub const CRC: Self = Self(0x01);
+        pub struct Hsebyp(pub u8);
+        impl Hsebyp {
+            #[doc = "HSE crystal oscillator not bypassed"]
+            pub const NOTBYPASSED: Self = Self(0);
+            #[doc = "HSE crystal oscillator bypassed with external clock"]
+            pub const BYPASSED: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Frlvlr(pub u8);
-        impl Frlvlr {
-            #[doc = "Rx FIFO Empty"]
-            pub const EMPTY: Self = Self(0);
-            #[doc = "Rx 1/4 FIFO"]
-            pub const QUARTER: Self = Self(0x01);
-            #[doc = "Rx 1/2 FIFO"]
-            pub const HALF: Self = Self(0x02);
-            #[doc = "Rx FIFO full"]
-            pub const FULL: Self = Self(0x03);
+        pub struct Pll1fracen(pub u8);
+        impl Pll1fracen {
+            #[doc = "Reset latch to tranfer FRACN to the Sigma-Delta modulator"]
+            pub const RESET: Self = Self(0);
+            #[doc = "Set latch to tranfer FRACN to the Sigma-Delta modulator"]
+            pub const SET: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Bidioe(pub u8);
-        impl Bidioe {
-            #[doc = "Output disabled (receive-only mode)"]
-            pub const OUTPUTDISABLED: Self = Self(0);
-            #[doc = "Output enabled (transmit-only mode)"]
-            pub const OUTPUTENABLED: Self = Self(0x01);
+        pub struct C1RsrRmvf(pub u8);
+        impl C1RsrRmvf {
+            #[doc = "Not clearing the the reset flags"]
+            pub const NOTACTIVE: Self = Self(0);
+            #[doc = "Clear the reset flags"]
+            pub const CLEAR: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Rxonly(pub u8);
-        impl Rxonly {
-            #[doc = "Full duplex (Transmit and receive)"]
-            pub const FULLDUPLEX: Self = Self(0);
-            #[doc = "Output disabled (Receive-only mode)"]
-            pub const OUTPUTDISABLED: Self = Self(0x01);
+        pub struct C1Ahb2enrDcmien(pub u8);
+        impl C1Ahb2enrDcmien {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Frf(pub u8);
-        impl Frf {
-            #[doc = "SPI Motorola mode"]
-            pub const MOTOROLA: Self = Self(0);
-            #[doc = "SPI TI mode"]
-            pub const TI: Self = Self(0x01);
+        pub struct C1Apb1llpenrTim2lpen(pub u8);
+        impl C1Apb1llpenrTim2lpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ds(pub u8);
-        impl Ds {
-            #[doc = "4-bit"]
-            pub const FOURBIT: Self = Self(0x03);
-            #[doc = "5-bit"]
-            pub const FIVEBIT: Self = Self(0x04);
-            #[doc = "6-bit"]
-            pub const SIXBIT: Self = Self(0x05);
-            #[doc = "7-bit"]
-            pub const SEVENBIT: Self = Self(0x06);
-            #[doc = "8-bit"]
-            pub const EIGHTBIT: Self = Self(0x07);
-            #[doc = "9-bit"]
-            pub const NINEBIT: Self = Self(0x08);
-            #[doc = "10-bit"]
-            pub const TENBIT: Self = Self(0x09);
-            #[doc = "11-bit"]
-            pub const ELEVENBIT: Self = Self(0x0a);
-            #[doc = "12-bit"]
-            pub const TWELVEBIT: Self = Self(0x0b);
-            #[doc = "13-bit"]
-            pub const THIRTEENBIT: Self = Self(0x0c);
-            #[doc = "14-bit"]
-            pub const FOURTEENBIT: Self = Self(0x0d);
-            #[doc = "15-bit"]
-            pub const FIFTEENBIT: Self = Self(0x0e);
-            #[doc = "16-bit"]
-            pub const SIXTEENBIT: Self = Self(0x0f);
+        pub struct C1Apb2enrTim1en(pub u8);
+        impl C1Apb2enrTim1en {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Bidimode(pub u8);
-        impl Bidimode {
-            #[doc = "2-line unidirectional data mode selected"]
-            pub const UNIDIRECTIONAL: Self = Self(0);
-            #[doc = "1-line bidirectional data mode selected"]
-            pub const BIDIRECTIONAL: Self = Self(0x01);
+        pub struct Ahb2lpenrDcmilpen(pub u8);
+        impl Ahb2lpenrDcmilpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Frxth(pub u8);
-        impl Frxth {
-            #[doc = "RXNE event is generated if the FIFO level is greater than or equal to 1/2 (16-bit)"]
-            pub const HALF: Self = Self(0);
-            #[doc = "RXNE event is generated if the FIFO level is greater than or equal to 1/4 (8-bit)"]
-            pub const QUARTER: Self = Self(0x01);
+        pub struct Apb1lenrTim2en(pub u8);
+        impl Apb1lenrTim2en {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct LdmaTx(pub u8);
-        impl LdmaTx {
-            #[doc = "Number of data to transfer for transmit is even"]
-            pub const EVEN: Self = Self(0);
-            #[doc = "Number of data to transfer for transmit is odd"]
-            pub const ODD: Self = Self(0x01);
+        pub struct Pllsrc(pub u8);
+        impl Pllsrc {
+            #[doc = "HSI selected as PLL clock"]
+            pub const HSI: Self = Self(0);
+            #[doc = "CSI selected as PLL clock"]
+            pub const CSI: Self = Self(0x01);
+            #[doc = "HSE selected as PLL clock"]
+            pub const HSE: Self = Self(0x02);
+            #[doc = "No clock sent to DIVMx dividers and PLLs"]
+            pub const NONE: Self = Self(0x03);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Frer(pub u8);
-        impl Frer {
-            #[doc = "No frame format error"]
-            pub const NOERROR: Self = Self(0);
-            #[doc = "A frame format error occurred"]
-            pub const ERROR: Self = Self(0x01);
+        pub struct Bdrst(pub u8);
+        impl Bdrst {
+            #[doc = "Resets the entire VSW domain"]
+            pub const RESET: Self = Self(0x01);
         }
-    }
-    pub mod regs {
-        use crate::generic::*;
-        #[doc = "data register"]
         #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Dr(pub u32);
-        impl Dr {
-            #[doc = "Data register"]
-            pub const fn dr(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "Data register"]
-            pub fn set_dr(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lsirdyr(pub u8);
+        impl Lsirdyr {
+            #[doc = "LSI oscillator not ready"]
+            pub const NOTREADY: Self = Self(0);
+            #[doc = "LSI oscillator ready"]
+            pub const READY: Self = Self(0x01);
         }
-        impl Default for Dr {
-            fn default() -> Dr {
-                Dr(0)
-            }
-        }
-        #[doc = "control register 2"]
         #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr2(pub u32);
-        impl Cr2 {
-            #[doc = "Rx buffer DMA enable"]
-            pub const fn rxdmaen(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Rx buffer DMA enable"]
-            pub fn set_rxdmaen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Tx buffer DMA enable"]
-            pub const fn txdmaen(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Tx buffer DMA enable"]
-            pub fn set_txdmaen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "SS output enable"]
-            pub const fn ssoe(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SS output enable"]
-            pub fn set_ssoe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "NSS pulse management"]
-            pub const fn nssp(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "NSS pulse management"]
-            pub fn set_nssp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Frame format"]
-            pub const fn frf(&self) -> super::vals::Frf {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Frf(val as u8)
-            }
-            #[doc = "Frame format"]
-            pub fn set_frf(&mut self, val: super::vals::Frf) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Error interrupt enable"]
-            pub const fn errie(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Error interrupt enable"]
-            pub fn set_errie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "RX buffer not empty interrupt enable"]
-            pub const fn rxneie(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "RX buffer not empty interrupt enable"]
-            pub fn set_rxneie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Tx buffer empty interrupt enable"]
-            pub const fn txeie(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Tx buffer empty interrupt enable"]
-            pub fn set_txeie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Data size"]
-            pub const fn ds(&self) -> super::vals::Ds {
-                let val = (self.0 >> 8usize) & 0x0f;
-                super::vals::Ds(val as u8)
-            }
-            #[doc = "Data size"]
-            pub fn set_ds(&mut self, val: super::vals::Ds) {
-                self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize);
-            }
-            #[doc = "FIFO reception threshold"]
-            pub const fn frxth(&self) -> super::vals::Frxth {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Frxth(val as u8)
-            }
-            #[doc = "FIFO reception threshold"]
-            pub fn set_frxth(&mut self, val: super::vals::Frxth) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "Last DMA transfer for reception"]
-            pub const fn ldma_rx(&self) -> super::vals::LdmaRx {
-                let val = (self.0 >> 13usize) & 0x01;
-                super::vals::LdmaRx(val as u8)
-            }
-            #[doc = "Last DMA transfer for reception"]
-            pub fn set_ldma_rx(&mut self, val: super::vals::LdmaRx) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize);
-            }
-            #[doc = "Last DMA transfer for transmission"]
-            pub const fn ldma_tx(&self) -> super::vals::LdmaTx {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::LdmaTx(val as u8)
-            }
-            #[doc = "Last DMA transfer for transmission"]
-            pub fn set_ldma_tx(&mut self, val: super::vals::LdmaTx) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Apb4lpenrSyscfglpen(pub u8);
+        impl Apb4lpenrSyscfglpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
         }
-        impl Default for Cr2 {
-            fn default() -> Cr2 {
-                Cr2(0)
-            }
-        }
-        #[doc = "control register 1"]
         #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr1(pub u32);
-        impl Cr1 {
-            #[doc = "Clock phase"]
-            pub const fn cpha(&self) -> super::vals::Cpha {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Cpha(val as u8)
-            }
-            #[doc = "Clock phase"]
-            pub fn set_cpha(&mut self, val: super::vals::Cpha) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Clock polarity"]
-            pub const fn cpol(&self) -> super::vals::Cpol {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Cpol(val as u8)
-            }
-            #[doc = "Clock polarity"]
-            pub fn set_cpol(&mut self, val: super::vals::Cpol) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Master selection"]
-            pub const fn mstr(&self) -> super::vals::Mstr {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Mstr(val as u8)
-            }
-            #[doc = "Master selection"]
-            pub fn set_mstr(&mut self, val: super::vals::Mstr) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Baud rate control"]
-            pub const fn br(&self) -> super::vals::Br {
-                let val = (self.0 >> 3usize) & 0x07;
-                super::vals::Br(val as u8)
-            }
-            #[doc = "Baud rate control"]
-            pub fn set_br(&mut self, val: super::vals::Br) {
-                self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize);
-            }
-            #[doc = "SPI enable"]
-            pub const fn spe(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SPI enable"]
-            pub fn set_spe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Frame format"]
-            pub const fn lsbfirst(&self) -> super::vals::Lsbfirst {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Lsbfirst(val as u8)
-            }
-            #[doc = "Frame format"]
-            pub fn set_lsbfirst(&mut self, val: super::vals::Lsbfirst) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Internal slave select"]
-            pub const fn ssi(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Internal slave select"]
-            pub fn set_ssi(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Software slave management"]
-            pub const fn ssm(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Software slave management"]
-            pub fn set_ssm(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "Receive only"]
-            pub const fn rxonly(&self) -> super::vals::Rxonly {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Rxonly(val as u8)
-            }
-            #[doc = "Receive only"]
-            pub fn set_rxonly(&mut self, val: super::vals::Rxonly) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "CRC length"]
-            pub const fn crcl(&self) -> super::vals::Crcl {
-                let val = (self.0 >> 11usize) & 0x01;
-                super::vals::Crcl(val as u8)
-            }
-            #[doc = "CRC length"]
-            pub fn set_crcl(&mut self, val: super::vals::Crcl) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
-            }
-            #[doc = "CRC transfer next"]
-            pub const fn crcnext(&self) -> super::vals::Crcnext {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Crcnext(val as u8)
-            }
-            #[doc = "CRC transfer next"]
-            pub fn set_crcnext(&mut self, val: super::vals::Crcnext) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "Hardware CRC calculation enable"]
-            pub const fn crcen(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Hardware CRC calculation enable"]
-            pub fn set_crcen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
-            }
-            #[doc = "Output enable in bidirectional mode"]
-            pub const fn bidioe(&self) -> super::vals::Bidioe {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Bidioe(val as u8)
-            }
-            #[doc = "Output enable in bidirectional mode"]
-            pub fn set_bidioe(&mut self, val: super::vals::Bidioe) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "Bidirectional data mode enable"]
-            pub const fn bidimode(&self) -> super::vals::Bidimode {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Bidimode(val as u8)
-            }
-            #[doc = "Bidirectional data mode enable"]
-            pub fn set_bidimode(&mut self, val: super::vals::Bidimode) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Apb4enrSyscfgen(pub u8);
+        impl Apb4enrSyscfgen {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
         }
-        impl Default for Cr1 {
-            fn default() -> Cr1 {
-                Cr1(0)
-            }
-        }
-        #[doc = "status register"]
         #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Sr(pub u32);
-        impl Sr {
-            #[doc = "Receive buffer not empty"]
-            pub const fn rxne(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Receive buffer not empty"]
-            pub fn set_rxne(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Transmit buffer empty"]
-            pub const fn txe(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transmit buffer empty"]
-            pub fn set_txe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "CRC error flag"]
-            pub const fn crcerr(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CRC error flag"]
-            pub fn set_crcerr(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Mode fault"]
-            pub const fn modf(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Mode fault"]
-            pub fn set_modf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Overrun flag"]
-            pub const fn ovr(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Overrun flag"]
-            pub fn set_ovr(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Busy flag"]
-            pub const fn bsy(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Busy flag"]
-            pub fn set_bsy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Frame format error"]
-            pub const fn fre(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Frame format error"]
-            pub fn set_fre(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "FIFO reception level"]
-            pub const fn frlvl(&self) -> u8 {
-                let val = (self.0 >> 9usize) & 0x03;
-                val as u8
-            }
-            #[doc = "FIFO reception level"]
-            pub fn set_frlvl(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 9usize)) | (((val as u32) & 0x03) << 9usize);
-            }
-            #[doc = "FIFO Transmission Level"]
-            pub const fn ftlvl(&self) -> u8 {
-                let val = (self.0 >> 11usize) & 0x03;
-                val as u8
-            }
-            #[doc = "FIFO Transmission Level"]
-            pub fn set_ftlvl(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 11usize)) | (((val as u32) & 0x03) << 11usize);
-            }
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Rtcsel(pub u8);
+        impl Rtcsel {
+            #[doc = "No clock"]
+            pub const NOCLOCK: Self = Self(0);
+            #[doc = "LSE oscillator clock used as RTC clock"]
+            pub const LSE: Self = Self(0x01);
+            #[doc = "LSI oscillator clock used as RTC clock"]
+            pub const LSI: Self = Self(0x02);
+            #[doc = "HSE oscillator clock divided by a prescaler used as RTC clock"]
+            pub const HSE: Self = Self(0x03);
         }
-        impl Default for Sr {
-            fn default() -> Sr {
-                Sr(0)
-            }
-        }
-        #[doc = "TX CRC register"]
         #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Txcrcr(pub u32);
-        impl Txcrcr {
-            #[doc = "Tx CRC register"]
-            pub const fn tx_crc(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "Tx CRC register"]
-            pub fn set_tx_crc(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Mdmarst(pub u8);
+        impl Mdmarst {
+            #[doc = "Reset the selected module"]
+            pub const RESET: Self = Self(0x01);
         }
-        impl Default for Txcrcr {
-            fn default() -> Txcrcr {
-                Txcrcr(0)
-            }
-        }
-        #[doc = "RX CRC register"]
         #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Rxcrcr(pub u32);
-        impl Rxcrcr {
-            #[doc = "Rx CRC register"]
-            pub const fn rx_crc(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "Rx CRC register"]
-            pub fn set_rx_crc(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct C1Ahb1enrDma1en(pub u8);
+        impl C1Ahb1enrDma1en {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
         }
-        impl Default for Rxcrcr {
-            fn default() -> Rxcrcr {
-                Rxcrcr(0)
-            }
-        }
-        #[doc = "CRC polynomial register"]
         #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Crcpr(pub u32);
-        impl Crcpr {
-            #[doc = "CRC polynomial register"]
-            pub const fn crcpoly(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "CRC polynomial register"]
-            pub fn set_crcpoly(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Apb1llpenrTim2lpen(pub u8);
+        impl Apb1llpenrTim2lpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
         }
-        impl Default for Crcpr {
-            fn default() -> Crcpr {
-                Crcpr(0)
-            }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ltdcrst(pub u8);
+        impl Ltdcrst {
+            #[doc = "Reset the selected module"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Sdmmcsel(pub u8);
+        impl Sdmmcsel {
+            #[doc = "pll1_q selected as peripheral clock"]
+            pub const PLL1_Q: Self = Self(0);
+            #[doc = "pll2_r selected as peripheral clock"]
+            pub const PLL2_R: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct C1RsrCpurstfr(pub u8);
+        impl C1RsrCpurstfr {
+            #[doc = "No reset occoured for block"]
+            pub const NORESETOCCOURED: Self = Self(0);
+            #[doc = "Reset occoured for block"]
+            pub const RESETOCCOURRED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Apb2lpenrTim1lpen(pub u8);
+        impl Apb2lpenrTim1lpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct C1Apb3lpenrLtdclpen(pub u8);
+        impl C1Apb3lpenrLtdclpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Fmcsel(pub u8);
+        impl Fmcsel {
+            #[doc = "rcc_hclk3 selected as peripheral clock"]
+            pub const RCC_HCLK3: Self = Self(0);
+            #[doc = "pll1_q selected as peripheral clock"]
+            pub const PLL1_Q: Self = Self(0x01);
+            #[doc = "pll2_r selected as peripheral clock"]
+            pub const PLL2_R: Self = Self(0x02);
+            #[doc = "PER selected as peripheral clock"]
+            pub const PER: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ahb4lpenrGpioalpen(pub u8);
+        impl Ahb4lpenrGpioalpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Apb2enrTim1en(pub u8);
+        impl Apb2enrTim1en {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct C1Apb3enrLtdcen(pub u8);
+        impl C1Apb3enrLtdcen {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Rngsel(pub u8);
+        impl Rngsel {
+            #[doc = "HSI48 selected as peripheral clock"]
+            pub const HSI48: Self = Self(0);
+            #[doc = "pll1_q selected as peripheral clock"]
+            pub const PLL1_Q: Self = Self(0x01);
+            #[doc = "LSE selected as peripheral clock"]
+            pub const LSE: Self = Self(0x02);
+            #[doc = "LSI selected as peripheral clock"]
+            pub const LSI: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Usart234578sel(pub u8);
+        impl Usart234578sel {
+            #[doc = "rcc_pclk1 selected as peripheral clock"]
+            pub const RCC_PCLK1: Self = Self(0);
+            #[doc = "pll2_q selected as peripheral clock"]
+            pub const PLL2_Q: Self = Self(0x01);
+            #[doc = "pll3_q selected as peripheral clock"]
+            pub const PLL3_Q: Self = Self(0x02);
+            #[doc = "hsi_ker selected as peripheral clock"]
+            pub const HSI_KER: Self = Self(0x03);
+            #[doc = "csi_ker selected as peripheral clock"]
+            pub const CSI_KER: Self = Self(0x04);
+            #[doc = "LSE selected as peripheral clock"]
+            pub const LSE: Self = Self(0x05);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lptim2sel(pub u8);
+        impl Lptim2sel {
+            #[doc = "rcc_pclk4 selected as peripheral clock"]
+            pub const RCC_PCLK4: Self = Self(0);
+            #[doc = "pll2_p selected as peripheral clock"]
+            pub const PLL2_P: Self = Self(0x01);
+            #[doc = "pll3_r selected as peripheral clock"]
+            pub const PLL3_R: Self = Self(0x02);
+            #[doc = "LSE selected as peripheral clock"]
+            pub const LSE: Self = Self(0x03);
+            #[doc = "LSI selected as peripheral clock"]
+            pub const LSI: Self = Self(0x04);
+            #[doc = "PER selected as peripheral clock"]
+            pub const PER: Self = Self(0x05);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Tim1rst(pub u8);
+        impl Tim1rst {
+            #[doc = "Reset the selected module"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Crsrst(pub u8);
+        impl Crsrst {
+            #[doc = "Reset the selected module"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Sai4asel(pub u8);
+        impl Sai4asel {
+            #[doc = "pll1_q selected as peripheral clock"]
+            pub const PLL1_Q: Self = Self(0);
+            #[doc = "pll2_p selected as peripheral clock"]
+            pub const PLL2_P: Self = Self(0x01);
+            #[doc = "pll3_p selected as peripheral clock"]
+            pub const PLL3_P: Self = Self(0x02);
+            #[doc = "i2s_ckin selected as peripheral clock"]
+            pub const I2S_CKIN: Self = Self(0x03);
+            #[doc = "PER selected as peripheral clock"]
+            pub const PER: Self = Self(0x04);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Divp1en(pub u8);
+        impl Divp1en {
+            #[doc = "Clock ouput is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Clock output is enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct C1Apb4lpenrSyscfglpen(pub u8);
+        impl C1Apb4lpenrSyscfglpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Sw(pub u8);
+        impl Sw {
+            #[doc = "HSI selected as system clock"]
+            pub const HSI: Self = Self(0);
+            #[doc = "CSI selected as system clock"]
+            pub const CSI: Self = Self(0x01);
+            #[doc = "HSE selected as system clock"]
+            pub const HSE: Self = Self(0x02);
+            #[doc = "PLL1 selected as system clock"]
+            pub const PLL1: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Sai1sel(pub u8);
+        impl Sai1sel {
+            #[doc = "pll1_q selected as peripheral clock"]
+            pub const PLL1_Q: Self = Self(0);
+            #[doc = "pll2_p selected as peripheral clock"]
+            pub const PLL2_P: Self = Self(0x01);
+            #[doc = "pll3_p selected as peripheral clock"]
+            pub const PLL3_P: Self = Self(0x02);
+            #[doc = "I2S_CKIN selected as peripheral clock"]
+            pub const I2S_CKIN: Self = Self(0x03);
+            #[doc = "PER selected as peripheral clock"]
+            pub const PER: Self = Self(0x04);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct C1Ahb3lpenrMdmalpen(pub u8);
+        impl C1Ahb3lpenrMdmalpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lsirdyie(pub u8);
+        impl Lsirdyie {
+            #[doc = "Interrupt disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Interrupt enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lsedrv(pub u8);
+        impl Lsedrv {
+            #[doc = "Lowest LSE oscillator driving capability"]
+            pub const LOWEST: Self = Self(0);
+            #[doc = "Medium low LSE oscillator driving capability"]
+            pub const MEDIUMLOW: Self = Self(0x01);
+            #[doc = "Medium high LSE oscillator driving capability"]
+            pub const MEDIUMHIGH: Self = Self(0x02);
+            #[doc = "Highest LSE oscillator driving capability"]
+            pub const HIGHEST: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Rtcen(pub u8);
+        impl Rtcen {
+            #[doc = "RTC clock disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "RTC clock enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Adcsel(pub u8);
+        impl Adcsel {
+            #[doc = "pll2_p selected as peripheral clock"]
+            pub const PLL2_P: Self = Self(0);
+            #[doc = "pll3_r selected as peripheral clock"]
+            pub const PLL3_R: Self = Self(0x01);
+            #[doc = "PER selected as peripheral clock"]
+            pub const PER: Self = Self(0x02);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lsecssdr(pub u8);
+        impl Lsecssdr {
+            #[doc = "No failure detected on 32 kHz oscillator"]
+            pub const NOFAILURE: Self = Self(0);
+            #[doc = "Failure detected on 32 kHz oscillator"]
+            pub const FAILURE: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Syscfgrst(pub u8);
+        impl Syscfgrst {
+            #[doc = "Reset the selected module"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Camitfrst(pub u8);
+        impl Camitfrst {
+            #[doc = "Reset the selected module"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lpuart1sel(pub u8);
+        impl Lpuart1sel {
+            #[doc = "rcc_pclk_d3 selected as peripheral clock"]
+            pub const RCC_PCLK_D3: Self = Self(0);
+            #[doc = "pll2_q selected as peripheral clock"]
+            pub const PLL2_Q: Self = Self(0x01);
+            #[doc = "pll3_q selected as peripheral clock"]
+            pub const PLL3_Q: Self = Self(0x02);
+            #[doc = "hsi_ker selected as peripheral clock"]
+            pub const HSI_KER: Self = Self(0x03);
+            #[doc = "csi_ker selected as peripheral clock"]
+            pub const CSI_KER: Self = Self(0x04);
+            #[doc = "LSE selected as peripheral clock"]
+            pub const LSE: Self = Self(0x05);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Usbsel(pub u8);
+        impl Usbsel {
+            #[doc = "Disable the kernel clock"]
+            pub const DISABLE: Self = Self(0);
+            #[doc = "pll1_q selected as peripheral clock"]
+            pub const PLL1_Q: Self = Self(0x01);
+            #[doc = "pll3_q selected as peripheral clock"]
+            pub const PLL3_Q: Self = Self(0x02);
+            #[doc = "HSI48 selected as peripheral clock"]
+            pub const HSI48: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct C1Ahb2lpenrDcmilpen(pub u8);
+        impl C1Ahb2lpenrDcmilpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Stopwuck(pub u8);
+        impl Stopwuck {
+            #[doc = "HSI selected as wake up clock from system Stop"]
+            pub const HSI: Self = Self(0);
+            #[doc = "CSI selected as wake up clock from system Stop"]
+            pub const CSI: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lsion(pub u8);
+        impl Lsion {
+            #[doc = "LSI oscillator Off"]
+            pub const OFF: Self = Self(0);
+            #[doc = "LSI oscillator On"]
+            pub const ON: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Fdcansel(pub u8);
+        impl Fdcansel {
+            #[doc = "HSE selected as peripheral clock"]
+            pub const HSE: Self = Self(0);
+            #[doc = "pll1_q selected as peripheral clock"]
+            pub const PLL1_Q: Self = Self(0x01);
+            #[doc = "pll2_q selected as peripheral clock"]
+            pub const PLL2_Q: Self = Self(0x02);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Apb1hlpenrCrslpen(pub u8);
+        impl Apb1hlpenrCrslpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct C1Apb2lpenrTim1lpen(pub u8);
+        impl C1Apb2lpenrTim1lpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ahb4enrGpioaen(pub u8);
+        impl Ahb4enrGpioaen {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct C1Ahb1lpenrDma1lpen(pub u8);
+        impl C1Ahb1lpenrDma1lpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct C1Apb4enrSyscfgen(pub u8);
+        impl C1Apb4enrSyscfgen {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Apb3enrLtdcen(pub u8);
+        impl Apb3enrLtdcen {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Tim2rst(pub u8);
+        impl Tim2rst {
+            #[doc = "Reset the selected module"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Spi45sel(pub u8);
+        impl Spi45sel {
+            #[doc = "APB clock selected as peripheral clock"]
+            pub const APB: Self = Self(0);
+            #[doc = "pll2_q selected as peripheral clock"]
+            pub const PLL2_Q: Self = Self(0x01);
+            #[doc = "pll3_q selected as peripheral clock"]
+            pub const PLL3_Q: Self = Self(0x02);
+            #[doc = "hsi_ker selected as peripheral clock"]
+            pub const HSI_KER: Self = Self(0x03);
+            #[doc = "csi_ker selected as peripheral clock"]
+            pub const CSI_KER: Self = Self(0x04);
+            #[doc = "HSE selected as peripheral clock"]
+            pub const HSE: Self = Self(0x05);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Pll1vcosel(pub u8);
+        impl Pll1vcosel {
+            #[doc = "VCO frequency range 192 to 836 MHz"]
+            pub const WIDEVCO: Self = Self(0);
+            #[doc = "VCO frequency range 150 to 420 MHz"]
+            pub const MEDIUMVCO: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct C1Apb1henrCrsen(pub u8);
+        impl C1Apb1henrCrsen {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Swsr(pub u8);
+        impl Swsr {
+            #[doc = "HSI oscillator used as system clock"]
+            pub const HSI: Self = Self(0);
+            #[doc = "CSI oscillator used as system clock"]
+            pub const CSI: Self = Self(0x01);
+            #[doc = "HSE oscillator used as system clock"]
+            pub const HSE: Self = Self(0x02);
+            #[doc = "PLL1 used as system clock"]
+            pub const PLL1: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lsecsson(pub u8);
+        impl Lsecsson {
+            #[doc = "Clock security system on 32 kHz oscillator off"]
+            pub const SECURITYOFF: Self = Self(0);
+            #[doc = "Clock security system on 32 kHz oscillator on"]
+            pub const SECURITYON: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Apb1henrCrsen(pub u8);
+        impl Apb1henrCrsen {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ahb3lpenrMdmalpen(pub u8);
+        impl Ahb3lpenrMdmalpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Usart16sel(pub u8);
+        impl Usart16sel {
+            #[doc = "rcc_pclk2 selected as peripheral clock"]
+            pub const RCC_PCLK2: Self = Self(0);
+            #[doc = "pll2_q selected as peripheral clock"]
+            pub const PLL2_Q: Self = Self(0x01);
+            #[doc = "pll3_q selected as peripheral clock"]
+            pub const PLL3_Q: Self = Self(0x02);
+            #[doc = "hsi_ker selected as peripheral clock"]
+            pub const HSI_KER: Self = Self(0x03);
+            #[doc = "csi_ker selected as peripheral clock"]
+            pub const CSI_KER: Self = Self(0x04);
+            #[doc = "LSE selected as peripheral clock"]
+            pub const LSE: Self = Self(0x05);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Divp1(pub u8);
+        impl Divp1 {
+            #[doc = "pll_p_ck = vco_ck"]
+            pub const DIV1: Self = Self(0);
+            #[doc = "pll_p_ck = vco_ck / 2"]
+            pub const DIV2: Self = Self(0x01);
+            #[doc = "pll_p_ck = vco_ck / 4"]
+            pub const DIV4: Self = Self(0x03);
+            #[doc = "pll_p_ck = vco_ck / 6"]
+            pub const DIV6: Self = Self(0x05);
+            #[doc = "pll_p_ck = vco_ck / 8"]
+            pub const DIV8: Self = Self(0x07);
+            #[doc = "pll_p_ck = vco_ck / 10"]
+            pub const DIV10: Self = Self(0x09);
+            #[doc = "pll_p_ck = vco_ck / 12"]
+            pub const DIV12: Self = Self(0x0b);
+            #[doc = "pll_p_ck = vco_ck / 14"]
+            pub const DIV14: Self = Self(0x0d);
+            #[doc = "pll_p_ck = vco_ck / 16"]
+            pub const DIV16: Self = Self(0x0f);
+            #[doc = "pll_p_ck = vco_ck / 18"]
+            pub const DIV18: Self = Self(0x11);
+            #[doc = "pll_p_ck = vco_ck / 20"]
+            pub const DIV20: Self = Self(0x13);
+            #[doc = "pll_p_ck = vco_ck / 22"]
+            pub const DIV22: Self = Self(0x15);
+            #[doc = "pll_p_ck = vco_ck / 24"]
+            pub const DIV24: Self = Self(0x17);
+            #[doc = "pll_p_ck = vco_ck / 26"]
+            pub const DIV26: Self = Self(0x19);
+            #[doc = "pll_p_ck = vco_ck / 28"]
+            pub const DIV28: Self = Self(0x1b);
+            #[doc = "pll_p_ck = vco_ck / 30"]
+            pub const DIV30: Self = Self(0x1d);
+            #[doc = "pll_p_ck = vco_ck / 32"]
+            pub const DIV32: Self = Self(0x1f);
+            #[doc = "pll_p_ck = vco_ck / 34"]
+            pub const DIV34: Self = Self(0x21);
+            #[doc = "pll_p_ck = vco_ck / 36"]
+            pub const DIV36: Self = Self(0x23);
+            #[doc = "pll_p_ck = vco_ck / 38"]
+            pub const DIV38: Self = Self(0x25);
+            #[doc = "pll_p_ck = vco_ck / 40"]
+            pub const DIV40: Self = Self(0x27);
+            #[doc = "pll_p_ck = vco_ck / 42"]
+            pub const DIV42: Self = Self(0x29);
+            #[doc = "pll_p_ck = vco_ck / 44"]
+            pub const DIV44: Self = Self(0x2b);
+            #[doc = "pll_p_ck = vco_ck / 46"]
+            pub const DIV46: Self = Self(0x2d);
+            #[doc = "pll_p_ck = vco_ck / 48"]
+            pub const DIV48: Self = Self(0x2f);
+            #[doc = "pll_p_ck = vco_ck / 50"]
+            pub const DIV50: Self = Self(0x31);
+            #[doc = "pll_p_ck = vco_ck / 52"]
+            pub const DIV52: Self = Self(0x33);
+            #[doc = "pll_p_ck = vco_ck / 54"]
+            pub const DIV54: Self = Self(0x35);
+            #[doc = "pll_p_ck = vco_ck / 56"]
+            pub const DIV56: Self = Self(0x37);
+            #[doc = "pll_p_ck = vco_ck / 58"]
+            pub const DIV58: Self = Self(0x39);
+            #[doc = "pll_p_ck = vco_ck / 60"]
+            pub const DIV60: Self = Self(0x3b);
+            #[doc = "pll_p_ck = vco_ck / 62"]
+            pub const DIV62: Self = Self(0x3d);
+            #[doc = "pll_p_ck = vco_ck / 64"]
+            pub const DIV64: Self = Self(0x3f);
+            #[doc = "pll_p_ck = vco_ck / 66"]
+            pub const DIV66: Self = Self(0x41);
+            #[doc = "pll_p_ck = vco_ck / 68"]
+            pub const DIV68: Self = Self(0x43);
+            #[doc = "pll_p_ck = vco_ck / 70"]
+            pub const DIV70: Self = Self(0x45);
+            #[doc = "pll_p_ck = vco_ck / 72"]
+            pub const DIV72: Self = Self(0x47);
+            #[doc = "pll_p_ck = vco_ck / 74"]
+            pub const DIV74: Self = Self(0x49);
+            #[doc = "pll_p_ck = vco_ck / 76"]
+            pub const DIV76: Self = Self(0x4b);
+            #[doc = "pll_p_ck = vco_ck / 78"]
+            pub const DIV78: Self = Self(0x4d);
+            #[doc = "pll_p_ck = vco_ck / 80"]
+            pub const DIV80: Self = Self(0x4f);
+            #[doc = "pll_p_ck = vco_ck / 82"]
+            pub const DIV82: Self = Self(0x51);
+            #[doc = "pll_p_ck = vco_ck / 84"]
+            pub const DIV84: Self = Self(0x53);
+            #[doc = "pll_p_ck = vco_ck / 86"]
+            pub const DIV86: Self = Self(0x55);
+            #[doc = "pll_p_ck = vco_ck / 88"]
+            pub const DIV88: Self = Self(0x57);
+            #[doc = "pll_p_ck = vco_ck / 90"]
+            pub const DIV90: Self = Self(0x59);
+            #[doc = "pll_p_ck = vco_ck / 92"]
+            pub const DIV92: Self = Self(0x5b);
+            #[doc = "pll_p_ck = vco_ck / 94"]
+            pub const DIV94: Self = Self(0x5d);
+            #[doc = "pll_p_ck = vco_ck / 96"]
+            pub const DIV96: Self = Self(0x5f);
+            #[doc = "pll_p_ck = vco_ck / 98"]
+            pub const DIV98: Self = Self(0x61);
+            #[doc = "pll_p_ck = vco_ck / 100"]
+            pub const DIV100: Self = Self(0x63);
+            #[doc = "pll_p_ck = vco_ck / 102"]
+            pub const DIV102: Self = Self(0x65);
+            #[doc = "pll_p_ck = vco_ck / 104"]
+            pub const DIV104: Self = Self(0x67);
+            #[doc = "pll_p_ck = vco_ck / 106"]
+            pub const DIV106: Self = Self(0x69);
+            #[doc = "pll_p_ck = vco_ck / 108"]
+            pub const DIV108: Self = Self(0x6b);
+            #[doc = "pll_p_ck = vco_ck / 110"]
+            pub const DIV110: Self = Self(0x6d);
+            #[doc = "pll_p_ck = vco_ck / 112"]
+            pub const DIV112: Self = Self(0x6f);
+            #[doc = "pll_p_ck = vco_ck / 114"]
+            pub const DIV114: Self = Self(0x71);
+            #[doc = "pll_p_ck = vco_ck / 116"]
+            pub const DIV116: Self = Self(0x73);
+            #[doc = "pll_p_ck = vco_ck / 118"]
+            pub const DIV118: Self = Self(0x75);
+            #[doc = "pll_p_ck = vco_ck / 120"]
+            pub const DIV120: Self = Self(0x77);
+            #[doc = "pll_p_ck = vco_ck / 122"]
+            pub const DIV122: Self = Self(0x79);
+            #[doc = "pll_p_ck = vco_ck / 124"]
+            pub const DIV124: Self = Self(0x7b);
+            #[doc = "pll_p_ck = vco_ck / 126"]
+            pub const DIV126: Self = Self(0x7d);
+            #[doc = "pll_p_ck = vco_ck / 128"]
+            pub const DIV128: Self = Self(0x7f);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Pll1rge(pub u8);
+        impl Pll1rge {
+            #[doc = "Frequency is between 1 and 2 MHz"]
+            pub const RANGE1: Self = Self(0);
+            #[doc = "Frequency is between 2 and 4 MHz"]
+            pub const RANGE2: Self = Self(0x01);
+            #[doc = "Frequency is between 4 and 8 MHz"]
+            pub const RANGE4: Self = Self(0x02);
+            #[doc = "Frequency is between 8 and 16 MHz"]
+            pub const RANGE8: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Spdifsel(pub u8);
+        impl Spdifsel {
+            #[doc = "pll1_q selected as peripheral clock"]
+            pub const PLL1_Q: Self = Self(0);
+            #[doc = "pll2_r selected as peripheral clock"]
+            pub const PLL2_R: Self = Self(0x01);
+            #[doc = "pll3_r selected as peripheral clock"]
+            pub const PLL3_R: Self = Self(0x02);
+            #[doc = "hsi_ker selected as peripheral clock"]
+            pub const HSI_KER: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Dma1rst(pub u8);
+        impl Dma1rst {
+            #[doc = "Reset the selected module"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct D2ppre1(pub u8);
+        impl D2ppre1 {
+            #[doc = "rcc_hclk not divided"]
+            pub const DIV1: Self = Self(0);
+            #[doc = "rcc_hclk divided by 2"]
+            pub const DIV2: Self = Self(0x04);
+            #[doc = "rcc_hclk divided by 4"]
+            pub const DIV4: Self = Self(0x05);
+            #[doc = "rcc_hclk divided by 8"]
+            pub const DIV8: Self = Self(0x06);
+            #[doc = "rcc_hclk divided by 16"]
+            pub const DIV16: Self = Self(0x07);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ckpersel(pub u8);
+        impl Ckpersel {
+            #[doc = "HSI selected as peripheral clock"]
+            pub const HSI: Self = Self(0);
+            #[doc = "CSI selected as peripheral clock"]
+            pub const CSI: Self = Self(0x01);
+            #[doc = "HSE selected as peripheral clock"]
+            pub const HSE: Self = Self(0x02);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ahb1enrDma1en(pub u8);
+        impl Ahb1enrDma1en {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Swpsel(pub u8);
+        impl Swpsel {
+            #[doc = "pclk selected as peripheral clock"]
+            pub const PCLK: Self = Self(0);
+            #[doc = "hsi_ker selected as peripheral clock"]
+            pub const HSI_KER: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lseon(pub u8);
+        impl Lseon {
+            #[doc = "LSE oscillator Off"]
+            pub const OFF: Self = Self(0);
+            #[doc = "LSE oscillator On"]
+            pub const ON: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct C1Ahb4lpenrGpioalpen(pub u8);
+        impl C1Ahb4lpenrGpioalpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Cecsel(pub u8);
+        impl Cecsel {
+            #[doc = "LSE selected as peripheral clock"]
+            pub const LSE: Self = Self(0);
+            #[doc = "LSI selected as peripheral clock"]
+            pub const LSI: Self = Self(0x01);
+            #[doc = "csi_ker selected as peripheral clock"]
+            pub const CSI_KER: Self = Self(0x02);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct D3ppre(pub u8);
+        impl D3ppre {
+            #[doc = "rcc_hclk not divided"]
+            pub const DIV1: Self = Self(0);
+            #[doc = "rcc_hclk divided by 2"]
+            pub const DIV2: Self = Self(0x04);
+            #[doc = "rcc_hclk divided by 4"]
+            pub const DIV4: Self = Self(0x05);
+            #[doc = "rcc_hclk divided by 8"]
+            pub const DIV8: Self = Self(0x06);
+            #[doc = "rcc_hclk divided by 16"]
+            pub const DIV16: Self = Self(0x07);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Apb3lpenrLtdclpen(pub u8);
+        impl Apb3lpenrLtdclpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lsebyp(pub u8);
+        impl Lsebyp {
+            #[doc = "LSE crystal oscillator not bypassed"]
+            pub const NOTBYPASSED: Self = Self(0);
+            #[doc = "LSE crystal oscillator bypassed with external clock"]
+            pub const BYPASSED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct I2c4sel(pub u8);
+        impl I2c4sel {
+            #[doc = "rcc_pclk4 selected as peripheral clock"]
+            pub const RCC_PCLK4: Self = Self(0);
+            #[doc = "pll3_r selected as peripheral clock"]
+            pub const PLL3_R: Self = Self(0x01);
+            #[doc = "hsi_ker selected as peripheral clock"]
+            pub const HSI_KER: Self = Self(0x02);
+            #[doc = "csi_ker selected as peripheral clock"]
+            pub const CSI_KER: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct D1ppre(pub u8);
+        impl D1ppre {
+            #[doc = "rcc_hclk not divided"]
+            pub const DIV1: Self = Self(0);
+            #[doc = "rcc_hclk divided by 2"]
+            pub const DIV2: Self = Self(0x04);
+            #[doc = "rcc_hclk divided by 4"]
+            pub const DIV4: Self = Self(0x05);
+            #[doc = "rcc_hclk divided by 8"]
+            pub const DIV8: Self = Self(0x06);
+            #[doc = "rcc_hclk divided by 16"]
+            pub const DIV16: Self = Self(0x07);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ahb1lpenrDma1lpen(pub u8);
+        impl Ahb1lpenrDma1lpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Hsirdyr(pub u8);
+        impl Hsirdyr {
+            #[doc = "Clock not ready"]
+            pub const NOTREADY: Self = Self(0);
+            #[doc = "Clock ready"]
+            pub const READY: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Mco1(pub u8);
+        impl Mco1 {
+            #[doc = "HSI selected for micro-controller clock output"]
+            pub const HSI: Self = Self(0);
+            #[doc = "LSE selected for micro-controller clock output"]
+            pub const LSE: Self = Self(0x01);
+            #[doc = "HSE selected for micro-controller clock output"]
+            pub const HSE: Self = Self(0x02);
+            #[doc = "pll1_q selected for micro-controller clock output"]
+            pub const PLL1_Q: Self = Self(0x03);
+            #[doc = "HSI48 selected for micro-controller clock output"]
+            pub const HSI48: Self = Self(0x04);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ahb2enrDcmien(pub u8);
+        impl Ahb2enrDcmien {
+            #[doc = "The selected clock is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Hrtimsel(pub u8);
+        impl Hrtimsel {
+            #[doc = "The HRTIM prescaler clock source is the same as other timers (rcc_timy_ker_ck)"]
+            pub const TIMY_KER: Self = Self(0);
+            #[doc = "The HRTIM prescaler clock source is the CPU clock (c_ck)"]
+            pub const C_CK: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Timpre(pub u8);
+        impl Timpre {
+            #[doc = "Timer kernel clock equal to 2x pclk by default"]
+            pub const DEFAULTX2: Self = Self(0);
+            #[doc = "Timer kernel clock equal to 4x pclk by default"]
+            pub const DEFAULTX4: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Gpioarst(pub u8);
+        impl Gpioarst {
+            #[doc = "Reset the selected module"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct RsrRmvf(pub u8);
+        impl RsrRmvf {
+            #[doc = "Not clearing the the reset flags"]
+            pub const NOTACTIVE: Self = Self(0);
+            #[doc = "Clear the reset flags"]
+            pub const CLEAR: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lserdyr(pub u8);
+        impl Lserdyr {
+            #[doc = "LSE oscillator not ready"]
+            pub const NOTREADY: Self = Self(0);
+            #[doc = "LSE oscillator ready"]
+            pub const READY: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct C1Apb1hlpenrCrslpen(pub u8);
+        impl C1Apb1hlpenrCrslpen {
+            #[doc = "The selected clock is disabled during csleep mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "The selected clock is enabled during csleep mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Spi6sel(pub u8);
+        impl Spi6sel {
+            #[doc = "rcc_pclk4 selected as peripheral clock"]
+            pub const RCC_PCLK4: Self = Self(0);
+            #[doc = "pll2_q selected as peripheral clock"]
+            pub const PLL2_Q: Self = Self(0x01);
+            #[doc = "pll3_q selected as peripheral clock"]
+            pub const PLL3_Q: Self = Self(0x02);
+            #[doc = "hsi_ker selected as peripheral clock"]
+            pub const HSI_KER: Self = Self(0x03);
+            #[doc = "csi_ker selected as peripheral clock"]
+            pub const CSI_KER: Self = Self(0x04);
+            #[doc = "HSE selected as peripheral clock"]
+            pub const HSE: Self = Self(0x05);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lsirdyc(pub u8);
+        impl Lsirdyc {
+            #[doc = "Clear interrupt flag"]
+            pub const CLEAR: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Hsidivfr(pub u8);
+        impl Hsidivfr {
+            #[doc = "New HSIDIV ratio has not yet propagated to hsi_ck"]
+            pub const NOTPROPAGATED: Self = Self(0);
+            #[doc = "HSIDIV ratio has propagated to hsi_ck"]
+            pub const PROPAGATED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Bdmaamen(pub u8);
+        impl Bdmaamen {
+            #[doc = "Clock disabled in autonomous mode"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Clock enabled in autonomous mode"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Dfsdm1sel(pub u8);
+        impl Dfsdm1sel {
+            #[doc = "rcc_pclk2 selected as peripheral clock"]
+            pub const RCC_PCLK2: Self = Self(0);
+            #[doc = "System clock selected as peripheral clock"]
+            pub const SYS: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct I2c123sel(pub u8);
+        impl I2c123sel {
+            #[doc = "rcc_pclk1 selected as peripheral clock"]
+            pub const RCC_PCLK1: Self = Self(0);
+            #[doc = "pll3_r selected as peripheral clock"]
+            pub const PLL3_R: Self = Self(0x01);
+            #[doc = "hsi_ker selected as peripheral clock"]
+            pub const HSI_KER: Self = Self(0x02);
+            #[doc = "csi_ker selected as peripheral clock"]
+            pub const CSI_KER: Self = Self(0x03);
         }
     }
 }
@@ -13127,33 +11388,78 @@ pub mod dbgmcu_h7 {
                 Apb1lfz1(0)
             }
         }
-        #[doc = "Identity code"]
+        #[doc = "Configuration register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Idc(pub u32);
-        impl Idc {
-            #[doc = "Device ID"]
-            pub const fn dev_id(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x0fff;
-                val as u16
+        pub struct Cr(pub u32);
+        impl Cr {
+            #[doc = "Allow debug in D1 Sleep mode"]
+            pub const fn dbgsleep_d1(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
             }
-            #[doc = "Device ID"]
-            pub fn set_dev_id(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
+            #[doc = "Allow debug in D1 Sleep mode"]
+            pub fn set_dbgsleep_d1(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
             }
-            #[doc = "Revision ID"]
-            pub const fn rev_id(&self) -> u16 {
-                let val = (self.0 >> 16usize) & 0xffff;
-                val as u16
+            #[doc = "Allow debug in D1 Stop mode"]
+            pub const fn dbgstop_d1(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
             }
-            #[doc = "Revision ID"]
-            pub fn set_rev_id(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize);
+            #[doc = "Allow debug in D1 Stop mode"]
+            pub fn set_dbgstop_d1(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Allow debug in D1 Standby mode"]
+            pub const fn dbgstby_d1(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Allow debug in D1 Standby mode"]
+            pub fn set_dbgstby_d1(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Trace clock enable enable"]
+            pub const fn traceclken(&self) -> bool {
+                let val = (self.0 >> 20usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Trace clock enable enable"]
+            pub fn set_traceclken(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
+            }
+            #[doc = "D1 debug clock enable enable"]
+            pub const fn d1dbgcken(&self) -> bool {
+                let val = (self.0 >> 21usize) & 0x01;
+                val != 0
+            }
+            #[doc = "D1 debug clock enable enable"]
+            pub fn set_d1dbgcken(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
+            }
+            #[doc = "D3 debug clock enable enable"]
+            pub const fn d3dbgcken(&self) -> bool {
+                let val = (self.0 >> 22usize) & 0x01;
+                val != 0
+            }
+            #[doc = "D3 debug clock enable enable"]
+            pub fn set_d3dbgcken(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
+            }
+            #[doc = "External trigger output enable"]
+            pub const fn trgoen(&self) -> bool {
+                let val = (self.0 >> 28usize) & 0x01;
+                val != 0
+            }
+            #[doc = "External trigger output enable"]
+            pub fn set_trgoen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize);
             }
         }
-        impl Default for Idc {
-            fn default() -> Idc {
-                Idc(0)
+        impl Default for Cr {
+            fn default() -> Cr {
+                Cr(0)
             }
         }
         #[doc = "APB2 peripheral freeze register"]
@@ -13315,1368 +11621,37 @@ pub mod dbgmcu_h7 {
                 Apb4fz1(0)
             }
         }
-        #[doc = "Configuration register"]
+        #[doc = "Identity code"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr(pub u32);
-        impl Cr {
-            #[doc = "Allow debug in D1 Sleep mode"]
-            pub const fn dbgsleep_d1(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Allow debug in D1 Sleep mode"]
-            pub fn set_dbgsleep_d1(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Allow debug in D1 Stop mode"]
-            pub const fn dbgstop_d1(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Allow debug in D1 Stop mode"]
-            pub fn set_dbgstop_d1(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Allow debug in D1 Standby mode"]
-            pub const fn dbgstby_d1(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Allow debug in D1 Standby mode"]
-            pub fn set_dbgstby_d1(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Trace clock enable enable"]
-            pub const fn traceclken(&self) -> bool {
-                let val = (self.0 >> 20usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Trace clock enable enable"]
-            pub fn set_traceclken(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
-            }
-            #[doc = "D1 debug clock enable enable"]
-            pub const fn d1dbgcken(&self) -> bool {
-                let val = (self.0 >> 21usize) & 0x01;
-                val != 0
-            }
-            #[doc = "D1 debug clock enable enable"]
-            pub fn set_d1dbgcken(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
-            }
-            #[doc = "D3 debug clock enable enable"]
-            pub const fn d3dbgcken(&self) -> bool {
-                let val = (self.0 >> 22usize) & 0x01;
-                val != 0
-            }
-            #[doc = "D3 debug clock enable enable"]
-            pub fn set_d3dbgcken(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
-            }
-            #[doc = "External trigger output enable"]
-            pub const fn trgoen(&self) -> bool {
-                let val = (self.0 >> 28usize) & 0x01;
-                val != 0
-            }
-            #[doc = "External trigger output enable"]
-            pub fn set_trgoen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize);
-            }
-        }
-        impl Default for Cr {
-            fn default() -> Cr {
-                Cr(0)
-            }
-        }
-    }
-}
-pub mod usart_v1 {
-    use crate::generic::*;
-    #[doc = "Universal synchronous asynchronous receiver transmitter"]
-    #[derive(Copy, Clone)]
-    pub struct Usart(pub *mut u8);
-    unsafe impl Send for Usart {}
-    unsafe impl Sync for Usart {}
-    impl Usart {
-        #[doc = "Status register"]
-        pub fn sr(self) -> Reg<regs::Sr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "Data register"]
-        pub fn dr(self) -> Reg<regs::Dr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "Baud rate register"]
-        pub fn brr(self) -> Reg<regs::Brr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
-        }
-        #[doc = "Control register 1"]
-        pub fn cr1(self) -> Reg<regs::Cr1, RW> {
-            unsafe { Reg::from_ptr(self.0.add(12usize)) }
-        }
-        #[doc = "Control register 2"]
-        pub fn cr2(self) -> Reg<regs::Cr2Usart, RW> {
-            unsafe { Reg::from_ptr(self.0.add(16usize)) }
-        }
-        #[doc = "Control register 3"]
-        pub fn cr3(self) -> Reg<regs::Cr3Usart, RW> {
-            unsafe { Reg::from_ptr(self.0.add(20usize)) }
-        }
-        #[doc = "Guard time and prescaler register"]
-        pub fn gtpr(self) -> Reg<regs::Gtpr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(24usize)) }
-        }
-    }
-    #[doc = "Universal asynchronous receiver transmitter"]
-    #[derive(Copy, Clone)]
-    pub struct Uart(pub *mut u8);
-    unsafe impl Send for Uart {}
-    unsafe impl Sync for Uart {}
-    impl Uart {
-        #[doc = "Status register"]
-        pub fn sr(self) -> Reg<regs::Sr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "Data register"]
-        pub fn dr(self) -> Reg<regs::Dr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "Baud rate register"]
-        pub fn brr(self) -> Reg<regs::Brr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
-        }
-        #[doc = "Control register 1"]
-        pub fn cr1(self) -> Reg<regs::Cr1, RW> {
-            unsafe { Reg::from_ptr(self.0.add(12usize)) }
-        }
-        #[doc = "Control register 2"]
-        pub fn cr2(self) -> Reg<regs::Cr2, RW> {
-            unsafe { Reg::from_ptr(self.0.add(16usize)) }
-        }
-        #[doc = "Control register 3"]
-        pub fn cr3(self) -> Reg<regs::Cr3, RW> {
-            unsafe { Reg::from_ptr(self.0.add(20usize)) }
-        }
-    }
-    pub mod vals {
-        use crate::generic::*;
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lbdl(pub u8);
-        impl Lbdl {
-            #[doc = "10-bit break detection"]
-            pub const LBDL10: Self = Self(0);
-            #[doc = "11-bit break detection"]
-            pub const LBDL11: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Stop(pub u8);
-        impl Stop {
-            #[doc = "1 stop bit"]
-            pub const STOP1: Self = Self(0);
-            #[doc = "0.5 stop bits"]
-            pub const STOP0P5: Self = Self(0x01);
-            #[doc = "2 stop bits"]
-            pub const STOP2: Self = Self(0x02);
-            #[doc = "1.5 stop bits"]
-            pub const STOP1P5: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Rwu(pub u8);
-        impl Rwu {
-            #[doc = "Receiver in active mode"]
-            pub const ACTIVE: Self = Self(0);
-            #[doc = "Receiver in mute mode"]
-            pub const MUTE: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ps(pub u8);
-        impl Ps {
-            #[doc = "Even parity"]
-            pub const EVEN: Self = Self(0);
-            #[doc = "Odd parity"]
-            pub const ODD: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Wake(pub u8);
-        impl Wake {
-            #[doc = "USART wakeup on idle line"]
-            pub const IDLELINE: Self = Self(0);
-            #[doc = "USART wakeup on address mark"]
-            pub const ADDRESSMARK: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Cpha(pub u8);
-        impl Cpha {
-            #[doc = "The first clock transition is the first data capture edge"]
-            pub const FIRST: Self = Self(0);
-            #[doc = "The second clock transition is the first data capture edge"]
-            pub const SECOND: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct M(pub u8);
-        impl M {
-            #[doc = "8 data bits"]
-            pub const M8: Self = Self(0);
-            #[doc = "9 data bits"]
-            pub const M9: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Cpol(pub u8);
-        impl Cpol {
-            #[doc = "Steady low value on CK pin outside transmission window"]
-            pub const LOW: Self = Self(0);
-            #[doc = "Steady high value on CK pin outside transmission window"]
-            pub const HIGH: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Irlp(pub u8);
-        impl Irlp {
-            #[doc = "Normal mode"]
-            pub const NORMAL: Self = Self(0);
-            #[doc = "Low-power mode"]
-            pub const LOWPOWER: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hdsel(pub u8);
-        impl Hdsel {
-            #[doc = "Half duplex mode is not selected"]
-            pub const FULLDUPLEX: Self = Self(0);
-            #[doc = "Half duplex mode is selected"]
-            pub const HALFDUPLEX: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Sbk(pub u8);
-        impl Sbk {
-            #[doc = "No break character is transmitted"]
-            pub const NOBREAK: Self = Self(0);
-            #[doc = "Break character transmitted"]
-            pub const BREAK: Self = Self(0x01);
-        }
-    }
-    pub mod regs {
-        use crate::generic::*;
-        #[doc = "Control register 2"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr2Usart(pub u32);
-        impl Cr2Usart {
-            #[doc = "Address of the USART node"]
-            pub const fn add(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0x0f;
-                val as u8
-            }
-            #[doc = "Address of the USART node"]
-            pub fn set_add(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize);
-            }
-            #[doc = "lin break detection length"]
-            pub const fn lbdl(&self) -> super::vals::Lbdl {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Lbdl(val as u8)
-            }
-            #[doc = "lin break detection length"]
-            pub fn set_lbdl(&mut self, val: super::vals::Lbdl) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "LIN break detection interrupt enable"]
-            pub const fn lbdie(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LIN break detection interrupt enable"]
-            pub fn set_lbdie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Last bit clock pulse"]
-            pub const fn lbcl(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Last bit clock pulse"]
-            pub fn set_lbcl(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Clock phase"]
-            pub const fn cpha(&self) -> super::vals::Cpha {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Cpha(val as u8)
-            }
-            #[doc = "Clock phase"]
-            pub fn set_cpha(&mut self, val: super::vals::Cpha) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "Clock polarity"]
-            pub const fn cpol(&self) -> super::vals::Cpol {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Cpol(val as u8)
-            }
-            #[doc = "Clock polarity"]
-            pub fn set_cpol(&mut self, val: super::vals::Cpol) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "Clock enable"]
-            pub const fn clken(&self) -> bool {
-                let val = (self.0 >> 11usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Clock enable"]
-            pub fn set_clken(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
-            }
-            #[doc = "STOP bits"]
-            pub const fn stop(&self) -> super::vals::Stop {
-                let val = (self.0 >> 12usize) & 0x03;
-                super::vals::Stop(val as u8)
-            }
-            #[doc = "STOP bits"]
-            pub fn set_stop(&mut self, val: super::vals::Stop) {
-                self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize);
-            }
-            #[doc = "LIN mode enable"]
-            pub const fn linen(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LIN mode enable"]
-            pub fn set_linen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
-            }
-        }
-        impl Default for Cr2Usart {
-            fn default() -> Cr2Usart {
-                Cr2Usart(0)
-            }
-        }
-        #[doc = "Guard time and prescaler register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Gtpr(pub u32);
-        impl Gtpr {
-            #[doc = "Prescaler value"]
-            pub const fn psc(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0xff;
-                val as u8
-            }
-            #[doc = "Prescaler value"]
-            pub fn set_psc(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
-            }
-            #[doc = "Guard time value"]
-            pub const fn gt(&self) -> u8 {
-                let val = (self.0 >> 8usize) & 0xff;
-                val as u8
-            }
-            #[doc = "Guard time value"]
-            pub fn set_gt(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize);
-            }
-        }
-        impl Default for Gtpr {
-            fn default() -> Gtpr {
-                Gtpr(0)
-            }
-        }
-        #[doc = "Control register 2"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr2(pub u32);
-        impl Cr2 {
-            #[doc = "Address of the USART node"]
-            pub const fn add(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0x0f;
-                val as u8
-            }
-            #[doc = "Address of the USART node"]
-            pub fn set_add(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize);
-            }
-            #[doc = "lin break detection length"]
-            pub const fn lbdl(&self) -> super::vals::Lbdl {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Lbdl(val as u8)
-            }
-            #[doc = "lin break detection length"]
-            pub fn set_lbdl(&mut self, val: super::vals::Lbdl) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "LIN break detection interrupt enable"]
-            pub const fn lbdie(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LIN break detection interrupt enable"]
-            pub fn set_lbdie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "STOP bits"]
-            pub const fn stop(&self) -> super::vals::Stop {
-                let val = (self.0 >> 12usize) & 0x03;
-                super::vals::Stop(val as u8)
-            }
-            #[doc = "STOP bits"]
-            pub fn set_stop(&mut self, val: super::vals::Stop) {
-                self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize);
-            }
-            #[doc = "LIN mode enable"]
-            pub const fn linen(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LIN mode enable"]
-            pub fn set_linen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
-            }
-        }
-        impl Default for Cr2 {
-            fn default() -> Cr2 {
-                Cr2(0)
-            }
-        }
-        #[doc = "Status register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Sr(pub u32);
-        impl Sr {
-            #[doc = "Parity error"]
-            pub const fn pe(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Parity error"]
-            pub fn set_pe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Framing error"]
-            pub const fn fe(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Framing error"]
-            pub fn set_fe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Noise error flag"]
-            pub const fn ne(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Noise error flag"]
-            pub fn set_ne(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Overrun error"]
-            pub const fn ore(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Overrun error"]
-            pub fn set_ore(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "IDLE line detected"]
-            pub const fn idle(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IDLE line detected"]
-            pub fn set_idle(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Read data register not empty"]
-            pub const fn rxne(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Read data register not empty"]
-            pub fn set_rxne(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Transmission complete"]
-            pub const fn tc(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transmission complete"]
-            pub fn set_tc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Transmit data register empty"]
-            pub const fn txe(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transmit data register empty"]
-            pub fn set_txe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "LIN break detection flag"]
-            pub const fn lbd(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LIN break detection flag"]
-            pub fn set_lbd(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-        }
-        impl Default for Sr {
-            fn default() -> Sr {
-                Sr(0)
-            }
-        }
-        #[doc = "Baud rate register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Brr(pub u32);
-        impl Brr {
-            #[doc = "fraction of USARTDIV"]
-            pub const fn div_fraction(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0x0f;
-                val as u8
-            }
-            #[doc = "fraction of USARTDIV"]
-            pub fn set_div_fraction(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize);
-            }
-            #[doc = "mantissa of USARTDIV"]
-            pub const fn div_mantissa(&self) -> u16 {
-                let val = (self.0 >> 4usize) & 0x0fff;
+        pub struct Idc(pub u32);
+        impl Idc {
+            #[doc = "Device ID"]
+            pub const fn dev_id(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x0fff;
                 val as u16
             }
-            #[doc = "mantissa of USARTDIV"]
-            pub fn set_div_mantissa(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 4usize)) | (((val as u32) & 0x0fff) << 4usize);
+            #[doc = "Device ID"]
+            pub fn set_dev_id(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
             }
-        }
-        impl Default for Brr {
-            fn default() -> Brr {
-                Brr(0)
-            }
-        }
-        #[doc = "Control register 3"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr3Usart(pub u32);
-        impl Cr3Usart {
-            #[doc = "Error interrupt enable"]
-            pub const fn eie(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Error interrupt enable"]
-            pub fn set_eie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "IrDA mode enable"]
-            pub const fn iren(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IrDA mode enable"]
-            pub fn set_iren(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "IrDA low-power"]
-            pub const fn irlp(&self) -> super::vals::Irlp {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Irlp(val as u8)
-            }
-            #[doc = "IrDA low-power"]
-            pub fn set_irlp(&mut self, val: super::vals::Irlp) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Half-duplex selection"]
-            pub const fn hdsel(&self) -> super::vals::Hdsel {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Hdsel(val as u8)
-            }
-            #[doc = "Half-duplex selection"]
-            pub fn set_hdsel(&mut self, val: super::vals::Hdsel) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Smartcard NACK enable"]
-            pub const fn nack(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Smartcard NACK enable"]
-            pub fn set_nack(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Smartcard mode enable"]
-            pub const fn scen(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Smartcard mode enable"]
-            pub fn set_scen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "DMA enable receiver"]
-            pub const fn dmar(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DMA enable receiver"]
-            pub fn set_dmar(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "DMA enable transmitter"]
-            pub const fn dmat(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DMA enable transmitter"]
-            pub fn set_dmat(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "RTS enable"]
-            pub const fn rtse(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "RTS enable"]
-            pub fn set_rtse(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "CTS enable"]
-            pub const fn ctse(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CTS enable"]
-            pub fn set_ctse(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "CTS interrupt enable"]
-            pub const fn ctsie(&self) -> bool {
-                let val = (self.0 >> 10usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CTS interrupt enable"]
-            pub fn set_ctsie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
-            }
-        }
-        impl Default for Cr3Usart {
-            fn default() -> Cr3Usart {
-                Cr3Usart(0)
-            }
-        }
-        #[doc = "Status register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct SrUsart(pub u32);
-        impl SrUsart {
-            #[doc = "Parity error"]
-            pub const fn pe(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Parity error"]
-            pub fn set_pe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Framing error"]
-            pub const fn fe(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Framing error"]
-            pub fn set_fe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Noise error flag"]
-            pub const fn ne(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Noise error flag"]
-            pub fn set_ne(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Overrun error"]
-            pub const fn ore(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Overrun error"]
-            pub fn set_ore(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "IDLE line detected"]
-            pub const fn idle(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IDLE line detected"]
-            pub fn set_idle(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Read data register not empty"]
-            pub const fn rxne(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Read data register not empty"]
-            pub fn set_rxne(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Transmission complete"]
-            pub const fn tc(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transmission complete"]
-            pub fn set_tc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Transmit data register empty"]
-            pub const fn txe(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transmit data register empty"]
-            pub fn set_txe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "LIN break detection flag"]
-            pub const fn lbd(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LIN break detection flag"]
-            pub fn set_lbd(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "CTS flag"]
-            pub const fn cts(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CTS flag"]
-            pub fn set_cts(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-        }
-        impl Default for SrUsart {
-            fn default() -> SrUsart {
-                SrUsart(0)
-            }
-        }
-        #[doc = "Control register 1"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr1(pub u32);
-        impl Cr1 {
-            #[doc = "Send break"]
-            pub const fn sbk(&self) -> super::vals::Sbk {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Sbk(val as u8)
-            }
-            #[doc = "Send break"]
-            pub fn set_sbk(&mut self, val: super::vals::Sbk) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Receiver wakeup"]
-            pub const fn rwu(&self) -> super::vals::Rwu {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Rwu(val as u8)
-            }
-            #[doc = "Receiver wakeup"]
-            pub fn set_rwu(&mut self, val: super::vals::Rwu) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Receiver enable"]
-            pub const fn re(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Receiver enable"]
-            pub fn set_re(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Transmitter enable"]
-            pub const fn te(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transmitter enable"]
-            pub fn set_te(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "IDLE interrupt enable"]
-            pub const fn idleie(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IDLE interrupt enable"]
-            pub fn set_idleie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "RXNE interrupt enable"]
-            pub const fn rxneie(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "RXNE interrupt enable"]
-            pub fn set_rxneie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Transmission complete interrupt enable"]
-            pub const fn tcie(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transmission complete interrupt enable"]
-            pub fn set_tcie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "TXE interrupt enable"]
-            pub const fn txeie(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "TXE interrupt enable"]
-            pub fn set_txeie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "PE interrupt enable"]
-            pub const fn peie(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "PE interrupt enable"]
-            pub fn set_peie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Parity selection"]
-            pub const fn ps(&self) -> super::vals::Ps {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Ps(val as u8)
-            }
-            #[doc = "Parity selection"]
-            pub fn set_ps(&mut self, val: super::vals::Ps) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "Parity control enable"]
-            pub const fn pce(&self) -> bool {
-                let val = (self.0 >> 10usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Parity control enable"]
-            pub fn set_pce(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
-            }
-            #[doc = "Wakeup method"]
-            pub const fn wake(&self) -> super::vals::Wake {
-                let val = (self.0 >> 11usize) & 0x01;
-                super::vals::Wake(val as u8)
-            }
-            #[doc = "Wakeup method"]
-            pub fn set_wake(&mut self, val: super::vals::Wake) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
-            }
-            #[doc = "Word length"]
-            pub const fn m(&self) -> super::vals::M {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::M(val as u8)
-            }
-            #[doc = "Word length"]
-            pub fn set_m(&mut self, val: super::vals::M) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "USART enable"]
-            pub const fn ue(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
-                val != 0
-            }
-            #[doc = "USART enable"]
-            pub fn set_ue(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
-            }
-        }
-        impl Default for Cr1 {
-            fn default() -> Cr1 {
-                Cr1(0)
-            }
-        }
-        #[doc = "Control register 3"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr3(pub u32);
-        impl Cr3 {
-            #[doc = "Error interrupt enable"]
-            pub const fn eie(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Error interrupt enable"]
-            pub fn set_eie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "IrDA mode enable"]
-            pub const fn iren(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IrDA mode enable"]
-            pub fn set_iren(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "IrDA low-power"]
-            pub const fn irlp(&self) -> super::vals::Irlp {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Irlp(val as u8)
-            }
-            #[doc = "IrDA low-power"]
-            pub fn set_irlp(&mut self, val: super::vals::Irlp) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Half-duplex selection"]
-            pub const fn hdsel(&self) -> super::vals::Hdsel {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Hdsel(val as u8)
-            }
-            #[doc = "Half-duplex selection"]
-            pub fn set_hdsel(&mut self, val: super::vals::Hdsel) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "DMA enable receiver"]
-            pub const fn dmar(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DMA enable receiver"]
-            pub fn set_dmar(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "DMA enable transmitter"]
-            pub const fn dmat(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DMA enable transmitter"]
-            pub fn set_dmat(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-        }
-        impl Default for Cr3 {
-            fn default() -> Cr3 {
-                Cr3(0)
-            }
-        }
-        #[doc = "Data register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Dr(pub u32);
-        impl Dr {
-            #[doc = "Data value"]
-            pub const fn dr(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x01ff;
+            #[doc = "Revision ID"]
+            pub const fn rev_id(&self) -> u16 {
+                let val = (self.0 >> 16usize) & 0xffff;
                 val as u16
             }
-            #[doc = "Data value"]
-            pub fn set_dr(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize);
+            #[doc = "Revision ID"]
+            pub fn set_rev_id(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize);
             }
         }
-        impl Default for Dr {
-            fn default() -> Dr {
-                Dr(0)
+        impl Default for Idc {
+            fn default() -> Idc {
+                Idc(0)
             }
         }
     }
 }
-pub mod dma_v1 {
-    use crate::generic::*;
-    #[doc = "DMA controller"]
-    #[derive(Copy, Clone)]
-    pub struct Dma(pub *mut u8);
-    unsafe impl Send for Dma {}
-    unsafe impl Sync for Dma {}
-    impl Dma {
-        #[doc = "DMA interrupt status register (DMA_ISR)"]
-        pub fn isr(self) -> Reg<regs::Isr, R> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "DMA interrupt flag clear register (DMA_IFCR)"]
-        pub fn ifcr(self) -> Reg<regs::Ifcr, W> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "Channel cluster: CCR?, CNDTR?, CPAR?, and CMAR? registers"]
-        pub fn ch(self, n: usize) -> Ch {
-            assert!(n < 7usize);
-            unsafe { Ch(self.0.add(8usize + n * 20usize)) }
-        }
-    }
-    #[doc = "Channel cluster: CCR?, CNDTR?, CPAR?, and CMAR? registers"]
-    #[derive(Copy, Clone)]
-    pub struct Ch(pub *mut u8);
-    unsafe impl Send for Ch {}
-    unsafe impl Sync for Ch {}
-    impl Ch {
-        #[doc = "DMA channel configuration register (DMA_CCR)"]
-        pub fn cr(self) -> Reg<regs::Cr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "DMA channel 1 number of data register"]
-        pub fn ndtr(self) -> Reg<regs::Ndtr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "DMA channel 1 peripheral address register"]
-        pub fn par(self) -> Reg<u32, RW> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
-        }
-        #[doc = "DMA channel 1 memory address register"]
-        pub fn mar(self) -> Reg<u32, RW> {
-            unsafe { Reg::from_ptr(self.0.add(12usize)) }
-        }
-    }
-    pub mod regs {
-        use crate::generic::*;
-        #[doc = "DMA interrupt flag clear register (DMA_IFCR)"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ifcr(pub u32);
-        impl Ifcr {
-            #[doc = "Channel 1 Global interrupt clear"]
-            pub fn cgif(&self, n: usize) -> bool {
-                assert!(n < 7usize);
-                let offs = 0usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Channel 1 Global interrupt clear"]
-            pub fn set_cgif(&mut self, n: usize, val: bool) {
-                assert!(n < 7usize);
-                let offs = 0usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Channel 1 Transfer Complete clear"]
-            pub fn ctcif(&self, n: usize) -> bool {
-                assert!(n < 7usize);
-                let offs = 1usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Channel 1 Transfer Complete clear"]
-            pub fn set_ctcif(&mut self, n: usize, val: bool) {
-                assert!(n < 7usize);
-                let offs = 1usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Channel 1 Half Transfer clear"]
-            pub fn chtif(&self, n: usize) -> bool {
-                assert!(n < 7usize);
-                let offs = 2usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Channel 1 Half Transfer clear"]
-            pub fn set_chtif(&mut self, n: usize, val: bool) {
-                assert!(n < 7usize);
-                let offs = 2usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Channel 1 Transfer Error clear"]
-            pub fn cteif(&self, n: usize) -> bool {
-                assert!(n < 7usize);
-                let offs = 3usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Channel 1 Transfer Error clear"]
-            pub fn set_cteif(&mut self, n: usize, val: bool) {
-                assert!(n < 7usize);
-                let offs = 3usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Ifcr {
-            fn default() -> Ifcr {
-                Ifcr(0)
-            }
-        }
-        #[doc = "DMA channel configuration register (DMA_CCR)"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr(pub u32);
-        impl Cr {
-            #[doc = "Channel enable"]
-            pub const fn en(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Channel enable"]
-            pub fn set_en(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Transfer complete interrupt enable"]
-            pub const fn tcie(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transfer complete interrupt enable"]
-            pub fn set_tcie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Half Transfer interrupt enable"]
-            pub const fn htie(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Half Transfer interrupt enable"]
-            pub fn set_htie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Transfer error interrupt enable"]
-            pub const fn teie(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transfer error interrupt enable"]
-            pub fn set_teie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Data transfer direction"]
-            pub const fn dir(&self) -> super::vals::Dir {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Dir(val as u8)
-            }
-            #[doc = "Data transfer direction"]
-            pub fn set_dir(&mut self, val: super::vals::Dir) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Circular mode"]
-            pub const fn circ(&self) -> super::vals::Circ {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Circ(val as u8)
-            }
-            #[doc = "Circular mode"]
-            pub fn set_circ(&mut self, val: super::vals::Circ) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Peripheral increment mode"]
-            pub const fn pinc(&self) -> super::vals::Inc {
-                let val = (self.0 >> 6usize) & 0x01;
-                super::vals::Inc(val as u8)
-            }
-            #[doc = "Peripheral increment mode"]
-            pub fn set_pinc(&mut self, val: super::vals::Inc) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Memory increment mode"]
-            pub const fn minc(&self) -> super::vals::Inc {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Inc(val as u8)
-            }
-            #[doc = "Memory increment mode"]
-            pub fn set_minc(&mut self, val: super::vals::Inc) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Peripheral size"]
-            pub const fn psize(&self) -> super::vals::Size {
-                let val = (self.0 >> 8usize) & 0x03;
-                super::vals::Size(val as u8)
-            }
-            #[doc = "Peripheral size"]
-            pub fn set_psize(&mut self, val: super::vals::Size) {
-                self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize);
-            }
-            #[doc = "Memory size"]
-            pub const fn msize(&self) -> super::vals::Size {
-                let val = (self.0 >> 10usize) & 0x03;
-                super::vals::Size(val as u8)
-            }
-            #[doc = "Memory size"]
-            pub fn set_msize(&mut self, val: super::vals::Size) {
-                self.0 = (self.0 & !(0x03 << 10usize)) | (((val.0 as u32) & 0x03) << 10usize);
-            }
-            #[doc = "Channel Priority level"]
-            pub const fn pl(&self) -> super::vals::Pl {
-                let val = (self.0 >> 12usize) & 0x03;
-                super::vals::Pl(val as u8)
-            }
-            #[doc = "Channel Priority level"]
-            pub fn set_pl(&mut self, val: super::vals::Pl) {
-                self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize);
-            }
-            #[doc = "Memory to memory mode"]
-            pub const fn mem2mem(&self) -> super::vals::Memmem {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Memmem(val as u8)
-            }
-            #[doc = "Memory to memory mode"]
-            pub fn set_mem2mem(&mut self, val: super::vals::Memmem) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-        }
-        impl Default for Cr {
-            fn default() -> Cr {
-                Cr(0)
-            }
-        }
-        #[doc = "DMA channel 1 number of data register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ndtr(pub u32);
-        impl Ndtr {
-            #[doc = "Number of data to transfer"]
-            pub const fn ndt(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "Number of data to transfer"]
-            pub fn set_ndt(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
-        }
-        impl Default for Ndtr {
-            fn default() -> Ndtr {
-                Ndtr(0)
-            }
-        }
-        #[doc = "DMA interrupt status register (DMA_ISR)"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Isr(pub u32);
-        impl Isr {
-            #[doc = "Channel 1 Global interrupt flag"]
-            pub fn gif(&self, n: usize) -> bool {
-                assert!(n < 7usize);
-                let offs = 0usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Channel 1 Global interrupt flag"]
-            pub fn set_gif(&mut self, n: usize, val: bool) {
-                assert!(n < 7usize);
-                let offs = 0usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Channel 1 Transfer Complete flag"]
-            pub fn tcif(&self, n: usize) -> bool {
-                assert!(n < 7usize);
-                let offs = 1usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Channel 1 Transfer Complete flag"]
-            pub fn set_tcif(&mut self, n: usize, val: bool) {
-                assert!(n < 7usize);
-                let offs = 1usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Channel 1 Half Transfer Complete flag"]
-            pub fn htif(&self, n: usize) -> bool {
-                assert!(n < 7usize);
-                let offs = 2usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Channel 1 Half Transfer Complete flag"]
-            pub fn set_htif(&mut self, n: usize, val: bool) {
-                assert!(n < 7usize);
-                let offs = 2usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Channel 1 Transfer Error flag"]
-            pub fn teif(&self, n: usize) -> bool {
-                assert!(n < 7usize);
-                let offs = 3usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Channel 1 Transfer Error flag"]
-            pub fn set_teif(&mut self, n: usize, val: bool) {
-                assert!(n < 7usize);
-                let offs = 3usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Isr {
-            fn default() -> Isr {
-                Isr(0)
-            }
-        }
-    }
-    pub mod vals {
-        use crate::generic::*;
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Size(pub u8);
-        impl Size {
-            #[doc = "8-bit size"]
-            pub const BITS8: Self = Self(0);
-            #[doc = "16-bit size"]
-            pub const BITS16: Self = Self(0x01);
-            #[doc = "32-bit size"]
-            pub const BITS32: Self = Self(0x02);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Inc(pub u8);
-        impl Inc {
-            #[doc = "Increment mode disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Increment mode enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Dir(pub u8);
-        impl Dir {
-            #[doc = "Read from peripheral"]
-            pub const FROMPERIPHERAL: Self = Self(0);
-            #[doc = "Read from memory"]
-            pub const FROMMEMORY: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Pl(pub u8);
-        impl Pl {
-            #[doc = "Low priority"]
-            pub const LOW: Self = Self(0);
-            #[doc = "Medium priority"]
-            pub const MEDIUM: Self = Self(0x01);
-            #[doc = "High priority"]
-            pub const HIGH: Self = Self(0x02);
-            #[doc = "Very high priority"]
-            pub const VERYHIGH: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Memmem(pub u8);
-        impl Memmem {
-            #[doc = "Memory to memory mode disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Memory to memory mode enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Circ(pub u8);
-        impl Circ {
-            #[doc = "Circular buffer disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Circular buffer enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-    }
-}
 pub mod syscfg_h7 {
     use crate::generic::*;
     #[doc = "System configuration controller"]
@@ -14785,6 +11760,35 @@ pub mod syscfg_h7 {
     }
     pub mod regs {
         use crate::generic::*;
+        #[doc = "SYSCFG user register 9"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ur9(pub u32);
+        impl Ur9 {
+            #[doc = "Write protection for flash bank 2"]
+            pub const fn wrpn_2(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Write protection for flash bank 2"]
+            pub fn set_wrpn_2(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
+            }
+            #[doc = "Protected area start address for bank 2"]
+            pub const fn pa_beg_2(&self) -> u16 {
+                let val = (self.0 >> 16usize) & 0x0fff;
+                val as u16
+            }
+            #[doc = "Protected area start address for bank 2"]
+            pub fn set_pa_beg_2(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize);
+            }
+        }
+        impl Default for Ur9 {
+            fn default() -> Ur9 {
+                Ur9(0)
+            }
+        }
         #[doc = "SYSCFG user register 6"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -14814,6 +11818,202 @@ pub mod syscfg_h7 {
                 Ur6(0)
             }
         }
+        #[doc = "SYSCFG user register 10"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ur10(pub u32);
+        impl Ur10 {
+            #[doc = "Protected area end address for bank 2"]
+            pub const fn pa_end_2(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x0fff;
+                val as u16
+            }
+            #[doc = "Protected area end address for bank 2"]
+            pub fn set_pa_end_2(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
+            }
+            #[doc = "Secured area start address for bank 2"]
+            pub const fn sa_beg_2(&self) -> u16 {
+                let val = (self.0 >> 16usize) & 0x0fff;
+                val as u16
+            }
+            #[doc = "Secured area start address for bank 2"]
+            pub fn set_sa_beg_2(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize);
+            }
+        }
+        impl Default for Ur10 {
+            fn default() -> Ur10 {
+                Ur10(0)
+            }
+        }
+        #[doc = "SYSCFG user register 7"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ur7(pub u32);
+        impl Ur7 {
+            #[doc = "Secured area start address for bank 1"]
+            pub const fn sa_beg_1(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x0fff;
+                val as u16
+            }
+            #[doc = "Secured area start address for bank 1"]
+            pub fn set_sa_beg_1(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
+            }
+            #[doc = "Secured area end address for bank 1"]
+            pub const fn sa_end_1(&self) -> u16 {
+                let val = (self.0 >> 16usize) & 0x0fff;
+                val as u16
+            }
+            #[doc = "Secured area end address for bank 1"]
+            pub fn set_sa_end_1(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize);
+            }
+        }
+        impl Default for Ur7 {
+            fn default() -> Ur7 {
+                Ur7(0)
+            }
+        }
+        #[doc = "SYSCFG user register 17"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ur17(pub u32);
+        impl Ur17 {
+            #[doc = "I/O high speed / low voltage"]
+            pub const fn io_hslv(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "I/O high speed / low voltage"]
+            pub fn set_io_hslv(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+        }
+        impl Default for Ur17 {
+            fn default() -> Ur17 {
+                Ur17(0)
+            }
+        }
+        #[doc = "SYSCFG power control register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Pwrcr(pub u32);
+        impl Pwrcr {
+            #[doc = "Overdrive enable"]
+            pub const fn oden(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0x0f;
+                val as u8
+            }
+            #[doc = "Overdrive enable"]
+            pub fn set_oden(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize);
+            }
+        }
+        impl Default for Pwrcr {
+            fn default() -> Pwrcr {
+                Pwrcr(0)
+            }
+        }
+        #[doc = "SYSCFG user register 16"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ur16(pub u32);
+        impl Ur16 {
+            #[doc = "Freeze independent watchdog in Stop mode"]
+            pub const fn fziwdgstp(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Freeze independent watchdog in Stop mode"]
+            pub fn set_fziwdgstp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Private key programmed"]
+            pub const fn pkp(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Private key programmed"]
+            pub fn set_pkp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
+            }
+        }
+        impl Default for Ur16 {
+            fn default() -> Ur16 {
+                Ur16(0)
+            }
+        }
+        #[doc = "SYSCFG user register 15"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ur15(pub u32);
+        impl Ur15 {
+            #[doc = "Freeze independent watchdog in Standby mode"]
+            pub const fn fziwdgstb(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Freeze independent watchdog in Standby mode"]
+            pub fn set_fziwdgstb(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
+            }
+        }
+        impl Default for Ur15 {
+            fn default() -> Ur15 {
+                Ur15(0)
+            }
+        }
+        #[doc = "SYSCFG user register 4"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ur4(pub u32);
+        impl Ur4 {
+            #[doc = "Mass Erase Protected Area Disabled for bank 1"]
+            pub const fn mepad_1(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Mass Erase Protected Area Disabled for bank 1"]
+            pub fn set_mepad_1(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
+            }
+        }
+        impl Default for Ur4 {
+            fn default() -> Ur4 {
+                Ur4(0)
+            }
+        }
+        #[doc = "SYSCFG user register 13"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ur13(pub u32);
+        impl Ur13 {
+            #[doc = "Secured DTCM RAM Size"]
+            pub const fn sdrs(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0x03;
+                val as u8
+            }
+            #[doc = "Secured DTCM RAM Size"]
+            pub fn set_sdrs(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 0usize)) | (((val as u32) & 0x03) << 0usize);
+            }
+            #[doc = "D1 Standby reset"]
+            pub const fn d1sbrst(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
+            }
+            #[doc = "D1 Standby reset"]
+            pub fn set_d1sbrst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
+            }
+        }
+        impl Default for Ur13 {
+            fn default() -> Ur13 {
+                Ur13(0)
+            }
+        }
         #[doc = "SYSCFG user register 14"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -14834,91 +12034,126 @@ pub mod syscfg_h7 {
                 Ur14(0)
             }
         }
-        #[doc = "SYSCFG user register 5"]
+        #[doc = "SYSCFG package register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ur5(pub u32);
-        impl Ur5 {
-            #[doc = "Mass erase secured area disabled for bank 1"]
-            pub const fn mesad_1(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Mass erase secured area disabled for bank 1"]
-            pub fn set_mesad_1(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Write protection for flash bank 1"]
-            pub const fn wrpn_1(&self) -> u8 {
-                let val = (self.0 >> 16usize) & 0xff;
-                val as u8
-            }
-            #[doc = "Write protection for flash bank 1"]
-            pub fn set_wrpn_1(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 16usize)) | (((val as u32) & 0xff) << 16usize);
-            }
-        }
-        impl Default for Ur5 {
-            fn default() -> Ur5 {
-                Ur5(0)
-            }
-        }
-        #[doc = "SYSCFG compensation cell code register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cccr(pub u32);
-        impl Cccr {
-            #[doc = "NMOS compensation code"]
-            pub const fn ncc(&self) -> u8 {
+        pub struct Pkgr(pub u32);
+        impl Pkgr {
+            #[doc = "Package"]
+            pub const fn pkg(&self) -> u8 {
                 let val = (self.0 >> 0usize) & 0x0f;
                 val as u8
             }
-            #[doc = "NMOS compensation code"]
-            pub fn set_ncc(&mut self, val: u8) {
+            #[doc = "Package"]
+            pub fn set_pkg(&mut self, val: u8) {
                 self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize);
             }
-            #[doc = "PMOS compensation code"]
-            pub const fn pcc(&self) -> u8 {
-                let val = (self.0 >> 4usize) & 0x0f;
-                val as u8
-            }
-            #[doc = "PMOS compensation code"]
-            pub fn set_pcc(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize);
+        }
+        impl Default for Pkgr {
+            fn default() -> Pkgr {
+                Pkgr(0)
             }
         }
-        impl Default for Cccr {
-            fn default() -> Cccr {
-                Cccr(0)
-            }
-        }
-        #[doc = "SYSCFG user register 2"]
+        #[doc = "external interrupt configuration register 2"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ur2(pub u32);
-        impl Ur2 {
-            #[doc = "BOR_LVL Brownout Reset Threshold Level"]
-            pub const fn borh(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0x03;
+        pub struct Exticr(pub u32);
+        impl Exticr {
+            #[doc = "EXTI x configuration (x = 4 to 7)"]
+            pub fn exti(&self, n: usize) -> u8 {
+                assert!(n < 4usize);
+                let offs = 0usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x0f;
                 val as u8
             }
-            #[doc = "BOR_LVL Brownout Reset Threshold Level"]
-            pub fn set_borh(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 0usize)) | (((val as u32) & 0x03) << 0usize);
+            #[doc = "EXTI x configuration (x = 4 to 7)"]
+            pub fn set_exti(&mut self, n: usize, val: u8) {
+                assert!(n < 4usize);
+                let offs = 0usize + n * 4usize;
+                self.0 = (self.0 & !(0x0f << offs)) | (((val as u32) & 0x0f) << offs);
             }
-            #[doc = "Boot Address 0"]
-            pub const fn boot_add0(&self) -> u16 {
+        }
+        impl Default for Exticr {
+            fn default() -> Exticr {
+                Exticr(0)
+            }
+        }
+        #[doc = "SYSCFG user register 0"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ur0(pub u32);
+        impl Ur0 {
+            #[doc = "Bank Swap"]
+            pub const fn bks(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Bank Swap"]
+            pub fn set_bks(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Readout protection"]
+            pub const fn rdp(&self) -> u8 {
+                let val = (self.0 >> 16usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Readout protection"]
+            pub fn set_rdp(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 16usize)) | (((val as u32) & 0xff) << 16usize);
+            }
+        }
+        impl Default for Ur0 {
+            fn default() -> Ur0 {
+                Ur0(0)
+            }
+        }
+        #[doc = "SYSCFG user register 3"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ur3(pub u32);
+        impl Ur3 {
+            #[doc = "Boot Address 1"]
+            pub const fn boot_add1(&self) -> u16 {
                 let val = (self.0 >> 16usize) & 0xffff;
                 val as u16
             }
-            #[doc = "Boot Address 0"]
-            pub fn set_boot_add0(&mut self, val: u16) {
+            #[doc = "Boot Address 1"]
+            pub fn set_boot_add1(&mut self, val: u16) {
                 self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize);
             }
         }
-        impl Default for Ur2 {
-            fn default() -> Ur2 {
-                Ur2(0)
+        impl Default for Ur3 {
+            fn default() -> Ur3 {
+                Ur3(0)
+            }
+        }
+        #[doc = "SYSCFG user register 11"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ur11(pub u32);
+        impl Ur11 {
+            #[doc = "Secured area end address for bank 2"]
+            pub const fn sa_end_2(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x0fff;
+                val as u16
+            }
+            #[doc = "Secured area end address for bank 2"]
+            pub fn set_sa_end_2(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
+            }
+            #[doc = "Independent Watchdog 1 mode"]
+            pub const fn iwdg1m(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Independent Watchdog 1 mode"]
+            pub fn set_iwdg1m(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
+            }
+        }
+        impl Default for Ur11 {
+            fn default() -> Ur11 {
+                Ur11(0)
             }
         }
         #[doc = "compensation cell control/status register"]
@@ -14968,24 +12203,120 @@ pub mod syscfg_h7 {
                 Cccsr(0)
             }
         }
-        #[doc = "SYSCFG user register 4"]
+        #[doc = "SYSCFG user register 5"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ur4(pub u32);
-        impl Ur4 {
-            #[doc = "Mass Erase Protected Area Disabled for bank 1"]
-            pub const fn mepad_1(&self) -> bool {
+        pub struct Ur5(pub u32);
+        impl Ur5 {
+            #[doc = "Mass erase secured area disabled for bank 1"]
+            pub const fn mesad_1(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Mass erase secured area disabled for bank 1"]
+            pub fn set_mesad_1(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Write protection for flash bank 1"]
+            pub const fn wrpn_1(&self) -> u8 {
+                let val = (self.0 >> 16usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Write protection for flash bank 1"]
+            pub fn set_wrpn_1(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 16usize)) | (((val as u32) & 0xff) << 16usize);
+            }
+        }
+        impl Default for Ur5 {
+            fn default() -> Ur5 {
+                Ur5(0)
+            }
+        }
+        #[doc = "SYSCFG compensation cell value register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ccvr(pub u32);
+        impl Ccvr {
+            #[doc = "NMOS compensation value"]
+            pub const fn ncv(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0x0f;
+                val as u8
+            }
+            #[doc = "NMOS compensation value"]
+            pub fn set_ncv(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize);
+            }
+            #[doc = "PMOS compensation value"]
+            pub const fn pcv(&self) -> u8 {
+                let val = (self.0 >> 4usize) & 0x0f;
+                val as u8
+            }
+            #[doc = "PMOS compensation value"]
+            pub fn set_pcv(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize);
+            }
+        }
+        impl Default for Ccvr {
+            fn default() -> Ccvr {
+                Ccvr(0)
+            }
+        }
+        #[doc = "SYSCFG user register 2"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ur2(pub u32);
+        impl Ur2 {
+            #[doc = "BOR_LVL Brownout Reset Threshold Level"]
+            pub const fn borh(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0x03;
+                val as u8
+            }
+            #[doc = "BOR_LVL Brownout Reset Threshold Level"]
+            pub fn set_borh(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 0usize)) | (((val as u32) & 0x03) << 0usize);
+            }
+            #[doc = "Boot Address 0"]
+            pub const fn boot_add0(&self) -> u16 {
+                let val = (self.0 >> 16usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "Boot Address 0"]
+            pub fn set_boot_add0(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize);
+            }
+        }
+        impl Default for Ur2 {
+            fn default() -> Ur2 {
+                Ur2(0)
+            }
+        }
+        #[doc = "SYSCFG user register 8"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ur8(pub u32);
+        impl Ur8 {
+            #[doc = "Mass erase protected area disabled for bank 2"]
+            pub const fn mepad_2(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Mass erase protected area disabled for bank 2"]
+            pub fn set_mepad_2(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Mass erase secured area disabled for bank 2"]
+            pub const fn mesad_2(&self) -> bool {
                 let val = (self.0 >> 16usize) & 0x01;
                 val != 0
             }
-            #[doc = "Mass Erase Protected Area Disabled for bank 1"]
-            pub fn set_mepad_1(&mut self, val: bool) {
+            #[doc = "Mass erase secured area disabled for bank 2"]
+            pub fn set_mesad_2(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
             }
         }
-        impl Default for Ur4 {
-            fn default() -> Ur4 {
-                Ur4(0)
+        impl Default for Ur8 {
+            fn default() -> Ur8 {
+                Ur8(0)
             }
         }
         #[doc = "SYSCFG user register 12"]
@@ -15154,351 +12485,154 @@ pub mod syscfg_h7 {
                 Pmcr(0)
             }
         }
-        #[doc = "SYSCFG user register 15"]
+        #[doc = "SYSCFG compensation cell code register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ur15(pub u32);
-        impl Ur15 {
-            #[doc = "Freeze independent watchdog in Standby mode"]
-            pub const fn fziwdgstb(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Freeze independent watchdog in Standby mode"]
-            pub fn set_fziwdgstb(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
-        }
-        impl Default for Ur15 {
-            fn default() -> Ur15 {
-                Ur15(0)
-            }
-        }
-        #[doc = "SYSCFG user register 16"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ur16(pub u32);
-        impl Ur16 {
-            #[doc = "Freeze independent watchdog in Stop mode"]
-            pub const fn fziwdgstp(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Freeze independent watchdog in Stop mode"]
-            pub fn set_fziwdgstp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Private key programmed"]
-            pub const fn pkp(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Private key programmed"]
-            pub fn set_pkp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
-        }
-        impl Default for Ur16 {
-            fn default() -> Ur16 {
-                Ur16(0)
-            }
-        }
-        #[doc = "SYSCFG user register 13"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ur13(pub u32);
-        impl Ur13 {
-            #[doc = "Secured DTCM RAM Size"]
-            pub const fn sdrs(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0x03;
-                val as u8
-            }
-            #[doc = "Secured DTCM RAM Size"]
-            pub fn set_sdrs(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 0usize)) | (((val as u32) & 0x03) << 0usize);
-            }
-            #[doc = "D1 Standby reset"]
-            pub const fn d1sbrst(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "D1 Standby reset"]
-            pub fn set_d1sbrst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
-        }
-        impl Default for Ur13 {
-            fn default() -> Ur13 {
-                Ur13(0)
-            }
-        }
-        #[doc = "SYSCFG package register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Pkgr(pub u32);
-        impl Pkgr {
-            #[doc = "Package"]
-            pub const fn pkg(&self) -> u8 {
+        pub struct Cccr(pub u32);
+        impl Cccr {
+            #[doc = "NMOS compensation code"]
+            pub const fn ncc(&self) -> u8 {
                 let val = (self.0 >> 0usize) & 0x0f;
                 val as u8
             }
-            #[doc = "Package"]
-            pub fn set_pkg(&mut self, val: u8) {
+            #[doc = "NMOS compensation code"]
+            pub fn set_ncc(&mut self, val: u8) {
                 self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize);
             }
-        }
-        impl Default for Pkgr {
-            fn default() -> Pkgr {
-                Pkgr(0)
-            }
-        }
-        #[doc = "SYSCFG user register 11"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ur11(pub u32);
-        impl Ur11 {
-            #[doc = "Secured area end address for bank 2"]
-            pub const fn sa_end_2(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x0fff;
-                val as u16
-            }
-            #[doc = "Secured area end address for bank 2"]
-            pub fn set_sa_end_2(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
-            }
-            #[doc = "Independent Watchdog 1 mode"]
-            pub const fn iwdg1m(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Independent Watchdog 1 mode"]
-            pub fn set_iwdg1m(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
-        }
-        impl Default for Ur11 {
-            fn default() -> Ur11 {
-                Ur11(0)
-            }
-        }
-        #[doc = "SYSCFG user register 3"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ur3(pub u32);
-        impl Ur3 {
-            #[doc = "Boot Address 1"]
-            pub const fn boot_add1(&self) -> u16 {
-                let val = (self.0 >> 16usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "Boot Address 1"]
-            pub fn set_boot_add1(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize);
-            }
-        }
-        impl Default for Ur3 {
-            fn default() -> Ur3 {
-                Ur3(0)
-            }
-        }
-        #[doc = "SYSCFG user register 7"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ur7(pub u32);
-        impl Ur7 {
-            #[doc = "Secured area start address for bank 1"]
-            pub const fn sa_beg_1(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x0fff;
-                val as u16
-            }
-            #[doc = "Secured area start address for bank 1"]
-            pub fn set_sa_beg_1(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
-            }
-            #[doc = "Secured area end address for bank 1"]
-            pub const fn sa_end_1(&self) -> u16 {
-                let val = (self.0 >> 16usize) & 0x0fff;
-                val as u16
-            }
-            #[doc = "Secured area end address for bank 1"]
-            pub fn set_sa_end_1(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize);
-            }
-        }
-        impl Default for Ur7 {
-            fn default() -> Ur7 {
-                Ur7(0)
-            }
-        }
-        #[doc = "SYSCFG user register 10"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ur10(pub u32);
-        impl Ur10 {
-            #[doc = "Protected area end address for bank 2"]
-            pub const fn pa_end_2(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x0fff;
-                val as u16
-            }
-            #[doc = "Protected area end address for bank 2"]
-            pub fn set_pa_end_2(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
-            }
-            #[doc = "Secured area start address for bank 2"]
-            pub const fn sa_beg_2(&self) -> u16 {
-                let val = (self.0 >> 16usize) & 0x0fff;
-                val as u16
-            }
-            #[doc = "Secured area start address for bank 2"]
-            pub fn set_sa_beg_2(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize);
-            }
-        }
-        impl Default for Ur10 {
-            fn default() -> Ur10 {
-                Ur10(0)
-            }
-        }
-        #[doc = "SYSCFG user register 17"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ur17(pub u32);
-        impl Ur17 {
-            #[doc = "I/O high speed / low voltage"]
-            pub const fn io_hslv(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "I/O high speed / low voltage"]
-            pub fn set_io_hslv(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-        }
-        impl Default for Ur17 {
-            fn default() -> Ur17 {
-                Ur17(0)
-            }
-        }
-        #[doc = "SYSCFG compensation cell value register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ccvr(pub u32);
-        impl Ccvr {
-            #[doc = "NMOS compensation value"]
-            pub const fn ncv(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0x0f;
-                val as u8
-            }
-            #[doc = "NMOS compensation value"]
-            pub fn set_ncv(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize);
-            }
-            #[doc = "PMOS compensation value"]
-            pub const fn pcv(&self) -> u8 {
+            #[doc = "PMOS compensation code"]
+            pub const fn pcc(&self) -> u8 {
                 let val = (self.0 >> 4usize) & 0x0f;
                 val as u8
             }
-            #[doc = "PMOS compensation value"]
-            pub fn set_pcv(&mut self, val: u8) {
+            #[doc = "PMOS compensation code"]
+            pub fn set_pcc(&mut self, val: u8) {
                 self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize);
             }
         }
-        impl Default for Ccvr {
-            fn default() -> Ccvr {
-                Ccvr(0)
+        impl Default for Cccr {
+            fn default() -> Cccr {
+                Cccr(0)
             }
         }
-        #[doc = "SYSCFG user register 9"]
+    }
+}
+pub mod syscfg_f4 {
+    use crate::generic::*;
+    #[doc = "System configuration controller"]
+    #[derive(Copy, Clone)]
+    pub struct Syscfg(pub *mut u8);
+    unsafe impl Send for Syscfg {}
+    unsafe impl Sync for Syscfg {}
+    impl Syscfg {
+        #[doc = "memory remap register"]
+        pub fn memrm(self) -> Reg<regs::Memrm, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "peripheral mode configuration register"]
+        pub fn pmc(self) -> Reg<regs::Pmc, RW> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "external interrupt configuration register"]
+        pub fn exticr(self, n: usize) -> Reg<regs::Exticr, RW> {
+            assert!(n < 4usize);
+            unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) }
+        }
+        #[doc = "Compensation cell control register"]
+        pub fn cmpcr(self) -> Reg<regs::Cmpcr, R> {
+            unsafe { Reg::from_ptr(self.0.add(32usize)) }
+        }
+    }
+    pub mod regs {
+        use crate::generic::*;
+        #[doc = "peripheral mode configuration register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ur9(pub u32);
-        impl Ur9 {
-            #[doc = "Write protection for flash bank 2"]
-            pub const fn wrpn_2(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0xff;
-                val as u8
+        pub struct Pmc(pub u32);
+        impl Pmc {
+            #[doc = "ADC1DC2"]
+            pub const fn adc1dc2(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
             }
-            #[doc = "Write protection for flash bank 2"]
-            pub fn set_wrpn_2(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
+            #[doc = "ADC1DC2"]
+            pub fn set_adc1dc2(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
             }
-            #[doc = "Protected area start address for bank 2"]
-            pub const fn pa_beg_2(&self) -> u16 {
-                let val = (self.0 >> 16usize) & 0x0fff;
-                val as u16
+            #[doc = "ADC2DC2"]
+            pub const fn adc2dc2(&self) -> bool {
+                let val = (self.0 >> 17usize) & 0x01;
+                val != 0
             }
-            #[doc = "Protected area start address for bank 2"]
-            pub fn set_pa_beg_2(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize);
+            #[doc = "ADC2DC2"]
+            pub fn set_adc2dc2(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
+            }
+            #[doc = "ADC3DC2"]
+            pub const fn adc3dc2(&self) -> bool {
+                let val = (self.0 >> 18usize) & 0x01;
+                val != 0
+            }
+            #[doc = "ADC3DC2"]
+            pub fn set_adc3dc2(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize);
+            }
+            #[doc = "Ethernet PHY interface selection"]
+            pub const fn mii_rmii_sel(&self) -> bool {
+                let val = (self.0 >> 23usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Ethernet PHY interface selection"]
+            pub fn set_mii_rmii_sel(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
             }
         }
-        impl Default for Ur9 {
-            fn default() -> Ur9 {
-                Ur9(0)
+        impl Default for Pmc {
+            fn default() -> Pmc {
+                Pmc(0)
             }
         }
-        #[doc = "SYSCFG power control register"]
+        #[doc = "Compensation cell control register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Pwrcr(pub u32);
-        impl Pwrcr {
-            #[doc = "Overdrive enable"]
-            pub const fn oden(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0x0f;
-                val as u8
-            }
-            #[doc = "Overdrive enable"]
-            pub fn set_oden(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize);
-            }
-        }
-        impl Default for Pwrcr {
-            fn default() -> Pwrcr {
-                Pwrcr(0)
-            }
-        }
-        #[doc = "SYSCFG user register 0"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ur0(pub u32);
-        impl Ur0 {
-            #[doc = "Bank Swap"]
-            pub const fn bks(&self) -> bool {
+        pub struct Cmpcr(pub u32);
+        impl Cmpcr {
+            #[doc = "Compensation cell power-down"]
+            pub const fn cmp_pd(&self) -> bool {
                 let val = (self.0 >> 0usize) & 0x01;
                 val != 0
             }
-            #[doc = "Bank Swap"]
-            pub fn set_bks(&mut self, val: bool) {
+            #[doc = "Compensation cell power-down"]
+            pub fn set_cmp_pd(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
             }
-            #[doc = "Readout protection"]
-            pub const fn rdp(&self) -> u8 {
-                let val = (self.0 >> 16usize) & 0xff;
-                val as u8
+            #[doc = "READY"]
+            pub const fn ready(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
             }
-            #[doc = "Readout protection"]
-            pub fn set_rdp(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 16usize)) | (((val as u32) & 0xff) << 16usize);
+            #[doc = "READY"]
+            pub fn set_ready(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
             }
         }
-        impl Default for Ur0 {
-            fn default() -> Ur0 {
-                Ur0(0)
+        impl Default for Cmpcr {
+            fn default() -> Cmpcr {
+                Cmpcr(0)
             }
         }
-        #[doc = "external interrupt configuration register 2"]
+        #[doc = "external interrupt configuration register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
         pub struct Exticr(pub u32);
         impl Exticr {
-            #[doc = "EXTI x configuration (x = 4 to 7)"]
+            #[doc = "EXTI x configuration"]
             pub fn exti(&self, n: usize) -> u8 {
                 assert!(n < 4usize);
                 let offs = 0usize + n * 4usize;
                 let val = (self.0 >> offs) & 0x0f;
                 val as u8
             }
-            #[doc = "EXTI x configuration (x = 4 to 7)"]
+            #[doc = "EXTI x configuration"]
             pub fn set_exti(&mut self, n: usize, val: u8) {
                 assert!(n < 4usize);
                 let offs = 0usize + n * 4usize;
@@ -15510,5982 +12644,379 @@ pub mod syscfg_h7 {
                 Exticr(0)
             }
         }
-        #[doc = "SYSCFG user register 8"]
+        #[doc = "memory remap register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ur8(pub u32);
-        impl Ur8 {
-            #[doc = "Mass erase protected area disabled for bank 2"]
-            pub const fn mepad_2(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Mass erase protected area disabled for bank 2"]
-            pub fn set_mepad_2(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Mass erase secured area disabled for bank 2"]
-            pub const fn mesad_2(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Mass erase secured area disabled for bank 2"]
-            pub fn set_mesad_2(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
-        }
-        impl Default for Ur8 {
-            fn default() -> Ur8 {
-                Ur8(0)
-            }
-        }
-    }
-}
-pub mod timer_v1 {
-    use crate::generic::*;
-    #[doc = "General purpose 16-bit timer"]
-    #[derive(Copy, Clone)]
-    pub struct TimGp16(pub *mut u8);
-    unsafe impl Send for TimGp16 {}
-    unsafe impl Sync for TimGp16 {}
-    impl TimGp16 {
-        #[doc = "control register 1"]
-        pub fn cr1(self) -> Reg<regs::Cr1Gp, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "control register 2"]
-        pub fn cr2(self) -> Reg<regs::Cr2Gp, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "slave mode control register"]
-        pub fn smcr(self) -> Reg<regs::Smcr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
-        }
-        #[doc = "DMA/Interrupt enable register"]
-        pub fn dier(self) -> Reg<regs::DierGp, RW> {
-            unsafe { Reg::from_ptr(self.0.add(12usize)) }
-        }
-        #[doc = "status register"]
-        pub fn sr(self) -> Reg<regs::SrGp, RW> {
-            unsafe { Reg::from_ptr(self.0.add(16usize)) }
-        }
-        #[doc = "event generation register"]
-        pub fn egr(self) -> Reg<regs::EgrGp, W> {
-            unsafe { Reg::from_ptr(self.0.add(20usize)) }
-        }
-        #[doc = "capture/compare mode register 1 (input mode)"]
-        pub fn ccmr_input(self, n: usize) -> Reg<regs::CcmrInput, RW> {
-            assert!(n < 2usize);
-            unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) }
-        }
-        #[doc = "capture/compare mode register 1 (output mode)"]
-        pub fn ccmr_output(self, n: usize) -> Reg<regs::CcmrOutput, RW> {
-            assert!(n < 2usize);
-            unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) }
-        }
-        #[doc = "capture/compare enable register"]
-        pub fn ccer(self) -> Reg<regs::CcerGp, RW> {
-            unsafe { Reg::from_ptr(self.0.add(32usize)) }
-        }
-        #[doc = "counter"]
-        pub fn cnt(self) -> Reg<regs::Cnt16, RW> {
-            unsafe { Reg::from_ptr(self.0.add(36usize)) }
-        }
-        #[doc = "prescaler"]
-        pub fn psc(self) -> Reg<regs::Psc, RW> {
-            unsafe { Reg::from_ptr(self.0.add(40usize)) }
-        }
-        #[doc = "auto-reload register"]
-        pub fn arr(self) -> Reg<regs::Arr16, RW> {
-            unsafe { Reg::from_ptr(self.0.add(44usize)) }
-        }
-        #[doc = "capture/compare register"]
-        pub fn ccr(self, n: usize) -> Reg<regs::Ccr16, RW> {
-            assert!(n < 4usize);
-            unsafe { Reg::from_ptr(self.0.add(52usize + n * 4usize)) }
-        }
-        #[doc = "DMA control register"]
-        pub fn dcr(self) -> Reg<regs::Dcr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(72usize)) }
-        }
-        #[doc = "DMA address for full transfer"]
-        pub fn dmar(self) -> Reg<regs::Dmar, RW> {
-            unsafe { Reg::from_ptr(self.0.add(76usize)) }
-        }
-    }
-    #[doc = "Advanced-timers"]
-    #[derive(Copy, Clone)]
-    pub struct TimAdv(pub *mut u8);
-    unsafe impl Send for TimAdv {}
-    unsafe impl Sync for TimAdv {}
-    impl TimAdv {
-        #[doc = "control register 1"]
-        pub fn cr1(self) -> Reg<regs::Cr1Gp, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "control register 2"]
-        pub fn cr2(self) -> Reg<regs::Cr2Adv, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "slave mode control register"]
-        pub fn smcr(self) -> Reg<regs::Smcr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
-        }
-        #[doc = "DMA/Interrupt enable register"]
-        pub fn dier(self) -> Reg<regs::DierAdv, RW> {
-            unsafe { Reg::from_ptr(self.0.add(12usize)) }
-        }
-        #[doc = "status register"]
-        pub fn sr(self) -> Reg<regs::SrAdv, RW> {
-            unsafe { Reg::from_ptr(self.0.add(16usize)) }
-        }
-        #[doc = "event generation register"]
-        pub fn egr(self) -> Reg<regs::EgrAdv, W> {
-            unsafe { Reg::from_ptr(self.0.add(20usize)) }
-        }
-        #[doc = "capture/compare mode register 1 (input mode)"]
-        pub fn ccmr_input(self, n: usize) -> Reg<regs::CcmrInput, RW> {
-            assert!(n < 2usize);
-            unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) }
-        }
-        #[doc = "capture/compare mode register 1 (output mode)"]
-        pub fn ccmr_output(self, n: usize) -> Reg<regs::CcmrOutput, RW> {
-            assert!(n < 2usize);
-            unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) }
-        }
-        #[doc = "capture/compare enable register"]
-        pub fn ccer(self) -> Reg<regs::CcerAdv, RW> {
-            unsafe { Reg::from_ptr(self.0.add(32usize)) }
-        }
-        #[doc = "counter"]
-        pub fn cnt(self) -> Reg<regs::Cnt16, RW> {
-            unsafe { Reg::from_ptr(self.0.add(36usize)) }
-        }
-        #[doc = "prescaler"]
-        pub fn psc(self) -> Reg<regs::Psc, RW> {
-            unsafe { Reg::from_ptr(self.0.add(40usize)) }
-        }
-        #[doc = "auto-reload register"]
-        pub fn arr(self) -> Reg<regs::Arr16, RW> {
-            unsafe { Reg::from_ptr(self.0.add(44usize)) }
-        }
-        #[doc = "repetition counter register"]
-        pub fn rcr(self) -> Reg<regs::Rcr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(48usize)) }
-        }
-        #[doc = "capture/compare register"]
-        pub fn ccr(self, n: usize) -> Reg<regs::Ccr16, RW> {
-            assert!(n < 4usize);
-            unsafe { Reg::from_ptr(self.0.add(52usize + n * 4usize)) }
-        }
-        #[doc = "break and dead-time register"]
-        pub fn bdtr(self) -> Reg<regs::Bdtr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(68usize)) }
-        }
-        #[doc = "DMA control register"]
-        pub fn dcr(self) -> Reg<regs::Dcr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(72usize)) }
-        }
-        #[doc = "DMA address for full transfer"]
-        pub fn dmar(self) -> Reg<regs::Dmar, RW> {
-            unsafe { Reg::from_ptr(self.0.add(76usize)) }
-        }
-    }
-    #[doc = "General purpose 32-bit timer"]
-    #[derive(Copy, Clone)]
-    pub struct TimGp32(pub *mut u8);
-    unsafe impl Send for TimGp32 {}
-    unsafe impl Sync for TimGp32 {}
-    impl TimGp32 {
-        #[doc = "control register 1"]
-        pub fn cr1(self) -> Reg<regs::Cr1Gp, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "control register 2"]
-        pub fn cr2(self) -> Reg<regs::Cr2Gp, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "slave mode control register"]
-        pub fn smcr(self) -> Reg<regs::Smcr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
-        }
-        #[doc = "DMA/Interrupt enable register"]
-        pub fn dier(self) -> Reg<regs::DierGp, RW> {
-            unsafe { Reg::from_ptr(self.0.add(12usize)) }
-        }
-        #[doc = "status register"]
-        pub fn sr(self) -> Reg<regs::SrGp, RW> {
-            unsafe { Reg::from_ptr(self.0.add(16usize)) }
-        }
-        #[doc = "event generation register"]
-        pub fn egr(self) -> Reg<regs::EgrGp, W> {
-            unsafe { Reg::from_ptr(self.0.add(20usize)) }
-        }
-        #[doc = "capture/compare mode register 1 (input mode)"]
-        pub fn ccmr_input(self, n: usize) -> Reg<regs::CcmrInput, RW> {
-            assert!(n < 2usize);
-            unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) }
-        }
-        #[doc = "capture/compare mode register 1 (output mode)"]
-        pub fn ccmr_output(self, n: usize) -> Reg<regs::CcmrOutput, RW> {
-            assert!(n < 2usize);
-            unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) }
-        }
-        #[doc = "capture/compare enable register"]
-        pub fn ccer(self) -> Reg<regs::CcerGp, RW> {
-            unsafe { Reg::from_ptr(self.0.add(32usize)) }
-        }
-        #[doc = "counter"]
-        pub fn cnt(self) -> Reg<regs::Cnt32, RW> {
-            unsafe { Reg::from_ptr(self.0.add(36usize)) }
-        }
-        #[doc = "prescaler"]
-        pub fn psc(self) -> Reg<regs::Psc, RW> {
-            unsafe { Reg::from_ptr(self.0.add(40usize)) }
-        }
-        #[doc = "auto-reload register"]
-        pub fn arr(self) -> Reg<regs::Arr32, RW> {
-            unsafe { Reg::from_ptr(self.0.add(44usize)) }
-        }
-        #[doc = "capture/compare register"]
-        pub fn ccr(self, n: usize) -> Reg<regs::Ccr32, RW> {
-            assert!(n < 4usize);
-            unsafe { Reg::from_ptr(self.0.add(52usize + n * 4usize)) }
-        }
-        #[doc = "DMA control register"]
-        pub fn dcr(self) -> Reg<regs::Dcr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(72usize)) }
-        }
-        #[doc = "DMA address for full transfer"]
-        pub fn dmar(self) -> Reg<regs::Dmar, RW> {
-            unsafe { Reg::from_ptr(self.0.add(76usize)) }
-        }
-    }
-    #[doc = "Basic timer"]
-    #[derive(Copy, Clone)]
-    pub struct TimBasic(pub *mut u8);
-    unsafe impl Send for TimBasic {}
-    unsafe impl Sync for TimBasic {}
-    impl TimBasic {
-        #[doc = "control register 1"]
-        pub fn cr1(self) -> Reg<regs::Cr1Basic, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "control register 2"]
-        pub fn cr2(self) -> Reg<regs::Cr2Basic, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "DMA/Interrupt enable register"]
-        pub fn dier(self) -> Reg<regs::DierBasic, RW> {
-            unsafe { Reg::from_ptr(self.0.add(12usize)) }
-        }
-        #[doc = "status register"]
-        pub fn sr(self) -> Reg<regs::SrBasic, RW> {
-            unsafe { Reg::from_ptr(self.0.add(16usize)) }
-        }
-        #[doc = "event generation register"]
-        pub fn egr(self) -> Reg<regs::EgrBasic, W> {
-            unsafe { Reg::from_ptr(self.0.add(20usize)) }
-        }
-        #[doc = "counter"]
-        pub fn cnt(self) -> Reg<regs::Cnt16, RW> {
-            unsafe { Reg::from_ptr(self.0.add(36usize)) }
-        }
-        #[doc = "prescaler"]
-        pub fn psc(self) -> Reg<regs::Psc, RW> {
-            unsafe { Reg::from_ptr(self.0.add(40usize)) }
-        }
-        #[doc = "auto-reload register"]
-        pub fn arr(self) -> Reg<regs::Arr16, RW> {
-            unsafe { Reg::from_ptr(self.0.add(44usize)) }
-        }
-    }
-    pub mod regs {
-        use crate::generic::*;
-        #[doc = "capture/compare enable register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct CcerGp(pub u32);
-        impl CcerGp {
-            #[doc = "Capture/Compare 1 output enable"]
-            pub fn cce(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 0usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/Compare 1 output enable"]
-            pub fn set_cce(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 0usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Capture/Compare 1 output Polarity"]
-            pub fn ccp(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/Compare 1 output Polarity"]
-            pub fn set_ccp(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Capture/Compare 1 output Polarity"]
-            pub fn ccnp(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 3usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/Compare 1 output Polarity"]
-            pub fn set_ccnp(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 3usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for CcerGp {
-            fn default() -> CcerGp {
-                CcerGp(0)
-            }
-        }
-        #[doc = "status register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct SrBasic(pub u32);
-        impl SrBasic {
-            #[doc = "Update interrupt flag"]
-            pub const fn uif(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Update interrupt flag"]
-            pub fn set_uif(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-        }
-        impl Default for SrBasic {
-            fn default() -> SrBasic {
-                SrBasic(0)
-            }
-        }
-        #[doc = "control register 2"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr2Gp(pub u32);
-        impl Cr2Gp {
-            #[doc = "Capture/compare DMA selection"]
-            pub const fn ccds(&self) -> super::vals::Ccds {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Ccds(val as u8)
-            }
-            #[doc = "Capture/compare DMA selection"]
-            pub fn set_ccds(&mut self, val: super::vals::Ccds) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Master mode selection"]
-            pub const fn mms(&self) -> super::vals::Mms {
-                let val = (self.0 >> 4usize) & 0x07;
-                super::vals::Mms(val as u8)
-            }
-            #[doc = "Master mode selection"]
-            pub fn set_mms(&mut self, val: super::vals::Mms) {
-                self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize);
-            }
-            #[doc = "TI1 selection"]
-            pub const fn ti1s(&self) -> super::vals::Tis {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Tis(val as u8)
-            }
-            #[doc = "TI1 selection"]
-            pub fn set_ti1s(&mut self, val: super::vals::Tis) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-        }
-        impl Default for Cr2Gp {
-            fn default() -> Cr2Gp {
-                Cr2Gp(0)
-            }
-        }
-        #[doc = "control register 2"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr2Basic(pub u32);
-        impl Cr2Basic {
-            #[doc = "Master mode selection"]
-            pub const fn mms(&self) -> super::vals::Mms {
-                let val = (self.0 >> 4usize) & 0x07;
-                super::vals::Mms(val as u8)
-            }
-            #[doc = "Master mode selection"]
-            pub fn set_mms(&mut self, val: super::vals::Mms) {
-                self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize);
-            }
-        }
-        impl Default for Cr2Basic {
-            fn default() -> Cr2Basic {
-                Cr2Basic(0)
-            }
-        }
-        #[doc = "counter"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cnt16(pub u32);
-        impl Cnt16 {
-            #[doc = "counter value"]
-            pub const fn cnt(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "counter value"]
-            pub fn set_cnt(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
-        }
-        impl Default for Cnt16 {
-            fn default() -> Cnt16 {
-                Cnt16(0)
-            }
-        }
-        #[doc = "break and dead-time register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Bdtr(pub u32);
-        impl Bdtr {
-            #[doc = "Dead-time generator setup"]
-            pub const fn dtg(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0xff;
-                val as u8
-            }
-            #[doc = "Dead-time generator setup"]
-            pub fn set_dtg(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
-            }
-            #[doc = "Lock configuration"]
-            pub const fn lock(&self) -> u8 {
-                let val = (self.0 >> 8usize) & 0x03;
-                val as u8
-            }
-            #[doc = "Lock configuration"]
-            pub fn set_lock(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 8usize)) | (((val as u32) & 0x03) << 8usize);
-            }
-            #[doc = "Off-state selection for Idle mode"]
-            pub const fn ossi(&self) -> super::vals::Ossi {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Ossi(val as u8)
-            }
-            #[doc = "Off-state selection for Idle mode"]
-            pub fn set_ossi(&mut self, val: super::vals::Ossi) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "Off-state selection for Run mode"]
-            pub const fn ossr(&self) -> super::vals::Ossr {
-                let val = (self.0 >> 11usize) & 0x01;
-                super::vals::Ossr(val as u8)
-            }
-            #[doc = "Off-state selection for Run mode"]
-            pub fn set_ossr(&mut self, val: super::vals::Ossr) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
-            }
-            #[doc = "Break enable"]
-            pub const fn bke(&self) -> bool {
-                let val = (self.0 >> 12usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Break enable"]
-            pub fn set_bke(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
-            }
-            #[doc = "Break polarity"]
-            pub const fn bkp(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Break polarity"]
-            pub fn set_bkp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
-            }
-            #[doc = "Automatic output enable"]
-            pub const fn aoe(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Automatic output enable"]
-            pub fn set_aoe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
-            }
-            #[doc = "Main output enable"]
-            pub const fn moe(&self) -> bool {
-                let val = (self.0 >> 15usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Main output enable"]
-            pub fn set_moe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
-            }
-        }
-        impl Default for Bdtr {
-            fn default() -> Bdtr {
-                Bdtr(0)
-            }
-        }
-        #[doc = "capture/compare register 1"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ccr16(pub u32);
-        impl Ccr16 {
-            #[doc = "Capture/Compare 1 value"]
-            pub const fn ccr(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "Capture/Compare 1 value"]
-            pub fn set_ccr(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
-        }
-        impl Default for Ccr16 {
-            fn default() -> Ccr16 {
-                Ccr16(0)
-            }
-        }
-        #[doc = "capture/compare mode register 2 (output mode)"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct CcmrOutput(pub u32);
-        impl CcmrOutput {
-            #[doc = "Capture/Compare 3 selection"]
-            pub fn ccs(&self, n: usize) -> super::vals::CcmrOutputCcs {
-                assert!(n < 2usize);
-                let offs = 0usize + n * 8usize;
-                let val = (self.0 >> offs) & 0x03;
-                super::vals::CcmrOutputCcs(val as u8)
-            }
-            #[doc = "Capture/Compare 3 selection"]
-            pub fn set_ccs(&mut self, n: usize, val: super::vals::CcmrOutputCcs) {
-                assert!(n < 2usize);
-                let offs = 0usize + n * 8usize;
-                self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs);
-            }
-            #[doc = "Output compare 3 fast enable"]
-            pub fn ocfe(&self, n: usize) -> bool {
-                assert!(n < 2usize);
-                let offs = 2usize + n * 8usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Output compare 3 fast enable"]
-            pub fn set_ocfe(&mut self, n: usize, val: bool) {
-                assert!(n < 2usize);
-                let offs = 2usize + n * 8usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Output compare 3 preload enable"]
-            pub fn ocpe(&self, n: usize) -> super::vals::Ocpe {
-                assert!(n < 2usize);
-                let offs = 3usize + n * 8usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Ocpe(val as u8)
-            }
-            #[doc = "Output compare 3 preload enable"]
-            pub fn set_ocpe(&mut self, n: usize, val: super::vals::Ocpe) {
-                assert!(n < 2usize);
-                let offs = 3usize + n * 8usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-            #[doc = "Output compare 3 mode"]
-            pub fn ocm(&self, n: usize) -> super::vals::Ocm {
-                assert!(n < 2usize);
-                let offs = 4usize + n * 8usize;
-                let val = (self.0 >> offs) & 0x07;
-                super::vals::Ocm(val as u8)
-            }
-            #[doc = "Output compare 3 mode"]
-            pub fn set_ocm(&mut self, n: usize, val: super::vals::Ocm) {
-                assert!(n < 2usize);
-                let offs = 4usize + n * 8usize;
-                self.0 = (self.0 & !(0x07 << offs)) | (((val.0 as u32) & 0x07) << offs);
-            }
-            #[doc = "Output compare 3 clear enable"]
-            pub fn occe(&self, n: usize) -> bool {
-                assert!(n < 2usize);
-                let offs = 7usize + n * 8usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Output compare 3 clear enable"]
-            pub fn set_occe(&mut self, n: usize, val: bool) {
-                assert!(n < 2usize);
-                let offs = 7usize + n * 8usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for CcmrOutput {
-            fn default() -> CcmrOutput {
-                CcmrOutput(0)
-            }
-        }
-        #[doc = "counter"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cnt32(pub u32);
-        impl Cnt32 {
-            #[doc = "counter value"]
-            pub const fn cnt(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "counter value"]
-            pub fn set_cnt(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Cnt32 {
-            fn default() -> Cnt32 {
-                Cnt32(0)
-            }
-        }
-        #[doc = "capture/compare mode register 1 (input mode)"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct CcmrInput(pub u32);
-        impl CcmrInput {
-            #[doc = "Capture/Compare 1 selection"]
-            pub fn ccs(&self, n: usize) -> super::vals::CcmrInputCcs {
-                assert!(n < 2usize);
-                let offs = 0usize + n * 8usize;
-                let val = (self.0 >> offs) & 0x03;
-                super::vals::CcmrInputCcs(val as u8)
-            }
-            #[doc = "Capture/Compare 1 selection"]
-            pub fn set_ccs(&mut self, n: usize, val: super::vals::CcmrInputCcs) {
-                assert!(n < 2usize);
-                let offs = 0usize + n * 8usize;
-                self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs);
-            }
-            #[doc = "Input capture 1 prescaler"]
-            pub fn icpsc(&self, n: usize) -> u8 {
-                assert!(n < 2usize);
-                let offs = 2usize + n * 8usize;
-                let val = (self.0 >> offs) & 0x03;
-                val as u8
-            }
-            #[doc = "Input capture 1 prescaler"]
-            pub fn set_icpsc(&mut self, n: usize, val: u8) {
-                assert!(n < 2usize);
-                let offs = 2usize + n * 8usize;
-                self.0 = (self.0 & !(0x03 << offs)) | (((val as u32) & 0x03) << offs);
-            }
-            #[doc = "Input capture 1 filter"]
-            pub fn icf(&self, n: usize) -> super::vals::Icf {
-                assert!(n < 2usize);
-                let offs = 4usize + n * 8usize;
-                let val = (self.0 >> offs) & 0x0f;
-                super::vals::Icf(val as u8)
-            }
-            #[doc = "Input capture 1 filter"]
-            pub fn set_icf(&mut self, n: usize, val: super::vals::Icf) {
-                assert!(n < 2usize);
-                let offs = 4usize + n * 8usize;
-                self.0 = (self.0 & !(0x0f << offs)) | (((val.0 as u32) & 0x0f) << offs);
-            }
-        }
-        impl Default for CcmrInput {
-            fn default() -> CcmrInput {
-                CcmrInput(0)
-            }
-        }
-        #[doc = "status register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct SrAdv(pub u32);
-        impl SrAdv {
-            #[doc = "Update interrupt flag"]
-            pub const fn uif(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Update interrupt flag"]
-            pub fn set_uif(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Capture/compare 1 interrupt flag"]
-            pub fn ccif(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/compare 1 interrupt flag"]
-            pub fn set_ccif(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "COM interrupt flag"]
-            pub const fn comif(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "COM interrupt flag"]
-            pub fn set_comif(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Trigger interrupt flag"]
-            pub const fn tif(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Trigger interrupt flag"]
-            pub fn set_tif(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Break interrupt flag"]
-            pub const fn bif(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Break interrupt flag"]
-            pub fn set_bif(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Capture/Compare 1 overcapture flag"]
-            pub fn ccof(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 9usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/Compare 1 overcapture flag"]
-            pub fn set_ccof(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 9usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for SrAdv {
-            fn default() -> SrAdv {
-                SrAdv(0)
-            }
-        }
-        #[doc = "repetition counter register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Rcr(pub u32);
-        impl Rcr {
-            #[doc = "Repetition counter value"]
-            pub const fn rep(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0xff;
-                val as u8
-            }
-            #[doc = "Repetition counter value"]
-            pub fn set_rep(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
-            }
-        }
-        impl Default for Rcr {
-            fn default() -> Rcr {
-                Rcr(0)
-            }
-        }
-        #[doc = "DMA address for full transfer"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Dmar(pub u32);
-        impl Dmar {
-            #[doc = "DMA register for burst accesses"]
-            pub const fn dmab(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "DMA register for burst accesses"]
-            pub fn set_dmab(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
-        }
-        impl Default for Dmar {
-            fn default() -> Dmar {
-                Dmar(0)
-            }
-        }
-        #[doc = "auto-reload register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Arr32(pub u32);
-        impl Arr32 {
-            #[doc = "Auto-reload value"]
-            pub const fn arr(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "Auto-reload value"]
-            pub fn set_arr(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Arr32 {
-            fn default() -> Arr32 {
-                Arr32(0)
-            }
-        }
-        #[doc = "auto-reload register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Arr16(pub u32);
-        impl Arr16 {
-            #[doc = "Auto-reload value"]
-            pub const fn arr(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "Auto-reload value"]
-            pub fn set_arr(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
-        }
-        impl Default for Arr16 {
-            fn default() -> Arr16 {
-                Arr16(0)
-            }
-        }
-        #[doc = "DMA/Interrupt enable register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct DierAdv(pub u32);
-        impl DierAdv {
-            #[doc = "Update interrupt enable"]
-            pub const fn uie(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Update interrupt enable"]
-            pub fn set_uie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Capture/Compare 1 interrupt enable"]
-            pub fn ccie(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/Compare 1 interrupt enable"]
-            pub fn set_ccie(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "COM interrupt enable"]
-            pub const fn comie(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "COM interrupt enable"]
-            pub fn set_comie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Trigger interrupt enable"]
-            pub const fn tie(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Trigger interrupt enable"]
-            pub fn set_tie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Break interrupt enable"]
-            pub const fn bie(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Break interrupt enable"]
-            pub fn set_bie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Update DMA request enable"]
-            pub const fn ude(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Update DMA request enable"]
-            pub fn set_ude(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Capture/Compare 1 DMA request enable"]
-            pub fn ccde(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 9usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/Compare 1 DMA request enable"]
-            pub fn set_ccde(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 9usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "COM DMA request enable"]
-            pub const fn comde(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
-                val != 0
-            }
-            #[doc = "COM DMA request enable"]
-            pub fn set_comde(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
-            }
-            #[doc = "Trigger DMA request enable"]
-            pub const fn tde(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Trigger DMA request enable"]
-            pub fn set_tde(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
-            }
-        }
-        impl Default for DierAdv {
-            fn default() -> DierAdv {
-                DierAdv(0)
-            }
-        }
-        #[doc = "DMA/Interrupt enable register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct DierBasic(pub u32);
-        impl DierBasic {
-            #[doc = "Update interrupt enable"]
-            pub const fn uie(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Update interrupt enable"]
-            pub fn set_uie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Update DMA request enable"]
-            pub const fn ude(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Update DMA request enable"]
-            pub fn set_ude(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-        }
-        impl Default for DierBasic {
-            fn default() -> DierBasic {
-                DierBasic(0)
-            }
-        }
-        #[doc = "capture/compare enable register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct CcerAdv(pub u32);
-        impl CcerAdv {
-            #[doc = "Capture/Compare 1 output enable"]
-            pub fn cce(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 0usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/Compare 1 output enable"]
-            pub fn set_cce(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 0usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Capture/Compare 1 output Polarity"]
-            pub fn ccp(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/Compare 1 output Polarity"]
-            pub fn set_ccp(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Capture/Compare 1 complementary output enable"]
-            pub fn ccne(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 2usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/Compare 1 complementary output enable"]
-            pub fn set_ccne(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 2usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Capture/Compare 1 output Polarity"]
-            pub fn ccnp(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 3usize + n * 4usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/Compare 1 output Polarity"]
-            pub fn set_ccnp(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 3usize + n * 4usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for CcerAdv {
-            fn default() -> CcerAdv {
-                CcerAdv(0)
-            }
-        }
-        #[doc = "control register 1"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr1Gp(pub u32);
-        impl Cr1Gp {
-            #[doc = "Counter enable"]
-            pub const fn cen(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Counter enable"]
-            pub fn set_cen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Update disable"]
-            pub const fn udis(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Update disable"]
-            pub fn set_udis(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Update request source"]
-            pub const fn urs(&self) -> super::vals::Urs {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Urs(val as u8)
-            }
-            #[doc = "Update request source"]
-            pub fn set_urs(&mut self, val: super::vals::Urs) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "One-pulse mode"]
-            pub const fn opm(&self) -> super::vals::Opm {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Opm(val as u8)
-            }
-            #[doc = "One-pulse mode"]
-            pub fn set_opm(&mut self, val: super::vals::Opm) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Direction"]
-            pub const fn dir(&self) -> super::vals::Dir {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Dir(val as u8)
-            }
-            #[doc = "Direction"]
-            pub fn set_dir(&mut self, val: super::vals::Dir) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Center-aligned mode selection"]
-            pub const fn cms(&self) -> super::vals::Cms {
-                let val = (self.0 >> 5usize) & 0x03;
-                super::vals::Cms(val as u8)
-            }
-            #[doc = "Center-aligned mode selection"]
-            pub fn set_cms(&mut self, val: super::vals::Cms) {
-                self.0 = (self.0 & !(0x03 << 5usize)) | (((val.0 as u32) & 0x03) << 5usize);
-            }
-            #[doc = "Auto-reload preload enable"]
-            pub const fn arpe(&self) -> super::vals::Arpe {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Arpe(val as u8)
-            }
-            #[doc = "Auto-reload preload enable"]
-            pub fn set_arpe(&mut self, val: super::vals::Arpe) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Clock division"]
-            pub const fn ckd(&self) -> super::vals::Ckd {
-                let val = (self.0 >> 8usize) & 0x03;
-                super::vals::Ckd(val as u8)
-            }
-            #[doc = "Clock division"]
-            pub fn set_ckd(&mut self, val: super::vals::Ckd) {
-                self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize);
-            }
-        }
-        impl Default for Cr1Gp {
-            fn default() -> Cr1Gp {
-                Cr1Gp(0)
-            }
-        }
-        #[doc = "event generation register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct EgrAdv(pub u32);
-        impl EgrAdv {
-            #[doc = "Update generation"]
-            pub const fn ug(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Update generation"]
-            pub fn set_ug(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Capture/compare 1 generation"]
-            pub fn ccg(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/compare 1 generation"]
-            pub fn set_ccg(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Capture/Compare control update generation"]
-            pub const fn comg(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/Compare control update generation"]
-            pub fn set_comg(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Trigger generation"]
-            pub const fn tg(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Trigger generation"]
-            pub fn set_tg(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Break generation"]
-            pub const fn bg(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Break generation"]
-            pub fn set_bg(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-        }
-        impl Default for EgrAdv {
-            fn default() -> EgrAdv {
-                EgrAdv(0)
-            }
-        }
-        #[doc = "control register 1"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr1Basic(pub u32);
-        impl Cr1Basic {
-            #[doc = "Counter enable"]
-            pub const fn cen(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Counter enable"]
-            pub fn set_cen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Update disable"]
-            pub const fn udis(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Update disable"]
-            pub fn set_udis(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Update request source"]
-            pub const fn urs(&self) -> super::vals::Urs {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Urs(val as u8)
-            }
-            #[doc = "Update request source"]
-            pub fn set_urs(&mut self, val: super::vals::Urs) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "One-pulse mode"]
-            pub const fn opm(&self) -> super::vals::Opm {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Opm(val as u8)
-            }
-            #[doc = "One-pulse mode"]
-            pub fn set_opm(&mut self, val: super::vals::Opm) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Auto-reload preload enable"]
-            pub const fn arpe(&self) -> super::vals::Arpe {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Arpe(val as u8)
-            }
-            #[doc = "Auto-reload preload enable"]
-            pub fn set_arpe(&mut self, val: super::vals::Arpe) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-        }
-        impl Default for Cr1Basic {
-            fn default() -> Cr1Basic {
-                Cr1Basic(0)
-            }
-        }
-        #[doc = "capture/compare register 1"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ccr32(pub u32);
-        impl Ccr32 {
-            #[doc = "Capture/Compare 1 value"]
-            pub const fn ccr(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "Capture/Compare 1 value"]
-            pub fn set_ccr(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Ccr32 {
-            fn default() -> Ccr32 {
-                Ccr32(0)
-            }
-        }
-        #[doc = "status register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct SrGp(pub u32);
-        impl SrGp {
-            #[doc = "Update interrupt flag"]
-            pub const fn uif(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Update interrupt flag"]
-            pub fn set_uif(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Capture/compare 1 interrupt flag"]
-            pub fn ccif(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/compare 1 interrupt flag"]
-            pub fn set_ccif(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "COM interrupt flag"]
-            pub const fn comif(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "COM interrupt flag"]
-            pub fn set_comif(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Trigger interrupt flag"]
-            pub const fn tif(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Trigger interrupt flag"]
-            pub fn set_tif(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Break interrupt flag"]
-            pub const fn bif(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Break interrupt flag"]
-            pub fn set_bif(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Capture/Compare 1 overcapture flag"]
-            pub fn ccof(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 9usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/Compare 1 overcapture flag"]
-            pub fn set_ccof(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 9usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for SrGp {
-            fn default() -> SrGp {
-                SrGp(0)
-            }
-        }
-        #[doc = "event generation register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct EgrGp(pub u32);
-        impl EgrGp {
-            #[doc = "Update generation"]
-            pub const fn ug(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Update generation"]
-            pub fn set_ug(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Capture/compare 1 generation"]
-            pub fn ccg(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/compare 1 generation"]
-            pub fn set_ccg(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Capture/Compare control update generation"]
-            pub const fn comg(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/Compare control update generation"]
-            pub fn set_comg(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Trigger generation"]
-            pub const fn tg(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Trigger generation"]
-            pub fn set_tg(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Break generation"]
-            pub const fn bg(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Break generation"]
-            pub fn set_bg(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-        }
-        impl Default for EgrGp {
-            fn default() -> EgrGp {
-                EgrGp(0)
-            }
-        }
-        #[doc = "event generation register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct EgrBasic(pub u32);
-        impl EgrBasic {
-            #[doc = "Update generation"]
-            pub const fn ug(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Update generation"]
-            pub fn set_ug(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-        }
-        impl Default for EgrBasic {
-            fn default() -> EgrBasic {
-                EgrBasic(0)
-            }
-        }
-        #[doc = "slave mode control register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Smcr(pub u32);
-        impl Smcr {
-            #[doc = "Slave mode selection"]
-            pub const fn sms(&self) -> super::vals::Sms {
+        pub struct Memrm(pub u32);
+        impl Memrm {
+            #[doc = "Memory mapping selection"]
+            pub const fn mem_mode(&self) -> u8 {
                 let val = (self.0 >> 0usize) & 0x07;
-                super::vals::Sms(val as u8)
+                val as u8
             }
-            #[doc = "Slave mode selection"]
-            pub fn set_sms(&mut self, val: super::vals::Sms) {
-                self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize);
+            #[doc = "Memory mapping selection"]
+            pub fn set_mem_mode(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x07 << 0usize)) | (((val as u32) & 0x07) << 0usize);
             }
-            #[doc = "Trigger selection"]
-            pub const fn ts(&self) -> super::vals::Ts {
-                let val = (self.0 >> 4usize) & 0x07;
-                super::vals::Ts(val as u8)
-            }
-            #[doc = "Trigger selection"]
-            pub fn set_ts(&mut self, val: super::vals::Ts) {
-                self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize);
-            }
-            #[doc = "Master/Slave mode"]
-            pub const fn msm(&self) -> super::vals::Msm {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Msm(val as u8)
-            }
-            #[doc = "Master/Slave mode"]
-            pub fn set_msm(&mut self, val: super::vals::Msm) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "External trigger filter"]
-            pub const fn etf(&self) -> super::vals::Etf {
-                let val = (self.0 >> 8usize) & 0x0f;
-                super::vals::Etf(val as u8)
-            }
-            #[doc = "External trigger filter"]
-            pub fn set_etf(&mut self, val: super::vals::Etf) {
-                self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize);
-            }
-            #[doc = "External trigger prescaler"]
-            pub const fn etps(&self) -> super::vals::Etps {
-                let val = (self.0 >> 12usize) & 0x03;
-                super::vals::Etps(val as u8)
-            }
-            #[doc = "External trigger prescaler"]
-            pub fn set_etps(&mut self, val: super::vals::Etps) {
-                self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize);
-            }
-            #[doc = "External clock enable"]
-            pub const fn ece(&self) -> super::vals::Ece {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Ece(val as u8)
-            }
-            #[doc = "External clock enable"]
-            pub fn set_ece(&mut self, val: super::vals::Ece) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "External trigger polarity"]
-            pub const fn etp(&self) -> super::vals::Etp {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Etp(val as u8)
-            }
-            #[doc = "External trigger polarity"]
-            pub fn set_etp(&mut self, val: super::vals::Etp) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
-        }
-        impl Default for Smcr {
-            fn default() -> Smcr {
-                Smcr(0)
-            }
-        }
-        #[doc = "control register 2"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr2Adv(pub u32);
-        impl Cr2Adv {
-            #[doc = "Capture/compare preloaded control"]
-            pub const fn ccpc(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/compare preloaded control"]
-            pub fn set_ccpc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Capture/compare control update selection"]
-            pub const fn ccus(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/compare control update selection"]
-            pub fn set_ccus(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Capture/compare DMA selection"]
-            pub const fn ccds(&self) -> super::vals::Ccds {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Ccds(val as u8)
-            }
-            #[doc = "Capture/compare DMA selection"]
-            pub fn set_ccds(&mut self, val: super::vals::Ccds) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Master mode selection"]
-            pub const fn mms(&self) -> super::vals::Mms {
-                let val = (self.0 >> 4usize) & 0x07;
-                super::vals::Mms(val as u8)
-            }
-            #[doc = "Master mode selection"]
-            pub fn set_mms(&mut self, val: super::vals::Mms) {
-                self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize);
-            }
-            #[doc = "TI1 selection"]
-            pub const fn ti1s(&self) -> super::vals::Tis {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Tis(val as u8)
-            }
-            #[doc = "TI1 selection"]
-            pub fn set_ti1s(&mut self, val: super::vals::Tis) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Output Idle state 1"]
-            pub fn ois(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 8usize + n * 2usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Output Idle state 1"]
-            pub fn set_ois(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 8usize + n * 2usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Output Idle state 1"]
-            pub const fn ois1n(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Output Idle state 1"]
-            pub fn set_ois1n(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "Output Idle state 2"]
-            pub const fn ois2n(&self) -> bool {
-                let val = (self.0 >> 11usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Output Idle state 2"]
-            pub fn set_ois2n(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
-            }
-            #[doc = "Output Idle state 3"]
-            pub const fn ois3n(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Output Idle state 3"]
-            pub fn set_ois3n(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
-            }
-        }
-        impl Default for Cr2Adv {
-            fn default() -> Cr2Adv {
-                Cr2Adv(0)
-            }
-        }
-        #[doc = "DMA/Interrupt enable register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct DierGp(pub u32);
-        impl DierGp {
-            #[doc = "Update interrupt enable"]
-            pub const fn uie(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Update interrupt enable"]
-            pub fn set_uie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Capture/Compare 1 interrupt enable"]
-            pub fn ccie(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/Compare 1 interrupt enable"]
-            pub fn set_ccie(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 1usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Trigger interrupt enable"]
-            pub const fn tie(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Trigger interrupt enable"]
-            pub fn set_tie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Update DMA request enable"]
-            pub const fn ude(&self) -> bool {
+            #[doc = "Flash bank mode selection"]
+            pub const fn fb_mode(&self) -> bool {
                 let val = (self.0 >> 8usize) & 0x01;
                 val != 0
             }
-            #[doc = "Update DMA request enable"]
-            pub fn set_ude(&mut self, val: bool) {
+            #[doc = "Flash bank mode selection"]
+            pub fn set_fb_mode(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
             }
-            #[doc = "Capture/Compare 1 DMA request enable"]
-            pub fn ccde(&self, n: usize) -> bool {
-                assert!(n < 4usize);
-                let offs = 9usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Capture/Compare 1 DMA request enable"]
-            pub fn set_ccde(&mut self, n: usize, val: bool) {
-                assert!(n < 4usize);
-                let offs = 9usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Trigger DMA request enable"]
-            pub const fn tde(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Trigger DMA request enable"]
-            pub fn set_tde(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
-            }
-        }
-        impl Default for DierGp {
-            fn default() -> DierGp {
-                DierGp(0)
-            }
-        }
-        #[doc = "prescaler"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Psc(pub u32);
-        impl Psc {
-            #[doc = "Prescaler value"]
-            pub const fn psc(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "Prescaler value"]
-            pub fn set_psc(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
-        }
-        impl Default for Psc {
-            fn default() -> Psc {
-                Psc(0)
-            }
-        }
-        #[doc = "DMA control register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Dcr(pub u32);
-        impl Dcr {
-            #[doc = "DMA base address"]
-            pub const fn dba(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0x1f;
-                val as u8
-            }
-            #[doc = "DMA base address"]
-            pub fn set_dba(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x1f << 0usize)) | (((val as u32) & 0x1f) << 0usize);
-            }
-            #[doc = "DMA burst length"]
-            pub const fn dbl(&self) -> u8 {
-                let val = (self.0 >> 8usize) & 0x1f;
-                val as u8
-            }
-            #[doc = "DMA burst length"]
-            pub fn set_dbl(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x1f << 8usize)) | (((val as u32) & 0x1f) << 8usize);
-            }
-        }
-        impl Default for Dcr {
-            fn default() -> Dcr {
-                Dcr(0)
-            }
-        }
-    }
-    pub mod vals {
-        use crate::generic::*;
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Mms(pub u8);
-        impl Mms {
-            #[doc = "The UG bit from the TIMx_EGR register is used as trigger output"]
-            pub const RESET: Self = Self(0);
-            #[doc = "The counter enable signal, CNT_EN, is used as trigger output"]
-            pub const ENABLE: Self = Self(0x01);
-            #[doc = "The update event is selected as trigger output"]
-            pub const UPDATE: Self = Self(0x02);
-            #[doc = "The trigger output send a positive pulse when the CC1IF flag it to be set, as soon as a capture or a compare match occurred"]
-            pub const COMPAREPULSE: Self = Self(0x03);
-            #[doc = "OC1REF signal is used as trigger output"]
-            pub const COMPAREOC1: Self = Self(0x04);
-            #[doc = "OC2REF signal is used as trigger output"]
-            pub const COMPAREOC2: Self = Self(0x05);
-            #[doc = "OC3REF signal is used as trigger output"]
-            pub const COMPAREOC3: Self = Self(0x06);
-            #[doc = "OC4REF signal is used as trigger output"]
-            pub const COMPAREOC4: Self = Self(0x07);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Dir(pub u8);
-        impl Dir {
-            #[doc = "Counter used as upcounter"]
-            pub const UP: Self = Self(0);
-            #[doc = "Counter used as downcounter"]
-            pub const DOWN: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ckd(pub u8);
-        impl Ckd {
-            #[doc = "t_DTS = t_CK_INT"]
-            pub const DIV1: Self = Self(0);
-            #[doc = "t_DTS = 2 × t_CK_INT"]
-            pub const DIV2: Self = Self(0x01);
-            #[doc = "t_DTS = 4 × t_CK_INT"]
-            pub const DIV4: Self = Self(0x02);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ts(pub u8);
-        impl Ts {
-            #[doc = "Internal Trigger 0 (ITR0)"]
-            pub const ITR0: Self = Self(0);
-            #[doc = "Internal Trigger 1 (ITR1)"]
-            pub const ITR1: Self = Self(0x01);
-            #[doc = "Internal Trigger 2 (ITR2)"]
-            pub const ITR2: Self = Self(0x02);
-            #[doc = "TI1 Edge Detector (TI1F_ED)"]
-            pub const TI1F_ED: Self = Self(0x04);
-            #[doc = "Filtered Timer Input 1 (TI1FP1)"]
-            pub const TI1FP1: Self = Self(0x05);
-            #[doc = "Filtered Timer Input 2 (TI2FP2)"]
-            pub const TI2FP2: Self = Self(0x06);
-            #[doc = "External Trigger input (ETRF)"]
-            pub const ETRF: Self = Self(0x07);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ccds(pub u8);
-        impl Ccds {
-            #[doc = "CCx DMA request sent when CCx event occurs"]
-            pub const ONCOMPARE: Self = Self(0);
-            #[doc = "CCx DMA request sent when update event occurs"]
-            pub const ONUPDATE: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ossi(pub u8);
-        impl Ossi {
-            #[doc = "When inactive, OC/OCN outputs are disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "When inactive, OC/OCN outputs are forced to idle level"]
-            pub const IDLELEVEL: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Sms(pub u8);
-        impl Sms {
-            #[doc = "Slave mode disabled - if CEN = ‘1 then the prescaler is clocked directly by the internal clock."]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Encoder mode 1 - Counter counts up/down on TI2FP1 edge depending on TI1FP2 level."]
-            pub const ENCODER_MODE_1: Self = Self(0x01);
-            #[doc = "Encoder mode 2 - Counter counts up/down on TI1FP2 edge depending on TI2FP1 level."]
-            pub const ENCODER_MODE_2: Self = Self(0x02);
-            #[doc = "Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input."]
-            pub const ENCODER_MODE_3: Self = Self(0x03);
-            #[doc = "Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers."]
-            pub const RESET_MODE: Self = Self(0x04);
-            #[doc = "Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled."]
-            pub const GATED_MODE: Self = Self(0x05);
-            #[doc = "Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled."]
-            pub const TRIGGER_MODE: Self = Self(0x06);
-            #[doc = "External Clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter."]
-            pub const EXT_CLOCK_MODE: Self = Self(0x07);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Tis(pub u8);
-        impl Tis {
-            #[doc = "The TIMx_CH1 pin is connected to TI1 input"]
-            pub const NORMAL: Self = Self(0);
-            #[doc = "The TIMx_CH1, CH2, CH3 pins are connected to TI1 input"]
-            pub const XOR: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Etf(pub u8);
-        impl Etf {
-            #[doc = "No filter, sampling is done at fDTS"]
-            pub const NOFILTER: Self = Self(0);
-            #[doc = "fSAMPLING=fCK_INT, N=2"]
-            pub const FCK_INT_N2: Self = Self(0x01);
-            #[doc = "fSAMPLING=fCK_INT, N=4"]
-            pub const FCK_INT_N4: Self = Self(0x02);
-            #[doc = "fSAMPLING=fCK_INT, N=8"]
-            pub const FCK_INT_N8: Self = Self(0x03);
-            #[doc = "fSAMPLING=fDTS/2, N=6"]
-            pub const FDTS_DIV2_N6: Self = Self(0x04);
-            #[doc = "fSAMPLING=fDTS/2, N=8"]
-            pub const FDTS_DIV2_N8: Self = Self(0x05);
-            #[doc = "fSAMPLING=fDTS/4, N=6"]
-            pub const FDTS_DIV4_N6: Self = Self(0x06);
-            #[doc = "fSAMPLING=fDTS/4, N=8"]
-            pub const FDTS_DIV4_N8: Self = Self(0x07);
-            #[doc = "fSAMPLING=fDTS/8, N=6"]
-            pub const FDTS_DIV8_N6: Self = Self(0x08);
-            #[doc = "fSAMPLING=fDTS/8, N=8"]
-            pub const FDTS_DIV8_N8: Self = Self(0x09);
-            #[doc = "fSAMPLING=fDTS/16, N=5"]
-            pub const FDTS_DIV16_N5: Self = Self(0x0a);
-            #[doc = "fSAMPLING=fDTS/16, N=6"]
-            pub const FDTS_DIV16_N6: Self = Self(0x0b);
-            #[doc = "fSAMPLING=fDTS/16, N=8"]
-            pub const FDTS_DIV16_N8: Self = Self(0x0c);
-            #[doc = "fSAMPLING=fDTS/32, N=5"]
-            pub const FDTS_DIV32_N5: Self = Self(0x0d);
-            #[doc = "fSAMPLING=fDTS/32, N=6"]
-            pub const FDTS_DIV32_N6: Self = Self(0x0e);
-            #[doc = "fSAMPLING=fDTS/32, N=8"]
-            pub const FDTS_DIV32_N8: Self = Self(0x0f);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct CcmrInputCcs(pub u8);
-        impl CcmrInputCcs {
-            #[doc = "CCx channel is configured as input, normal mapping: ICx mapped to TIx"]
-            pub const TI4: Self = Self(0x01);
-            #[doc = "CCx channel is configured as input, alternate mapping (switches 1 with 2, 3 with 4)"]
-            pub const TI3: Self = Self(0x02);
-            #[doc = "CCx channel is configured as input, ICx is mapped on TRC"]
-            pub const TRC: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ossr(pub u8);
-        impl Ossr {
-            #[doc = "When inactive, OC/OCN outputs are disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "When inactive, OC/OCN outputs are enabled with their inactive level"]
-            pub const IDLELEVEL: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Msm(pub u8);
-        impl Msm {
-            #[doc = "No action"]
-            pub const NOSYNC: Self = Self(0);
-            #[doc = "The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event."]
-            pub const SYNC: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ocm(pub u8);
-        impl Ocm {
-            #[doc = "The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs"]
-            pub const FROZEN: Self = Self(0);
-            #[doc = "Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register"]
-            pub const ACTIVEONMATCH: Self = Self(0x01);
-            #[doc = "Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register"]
-            pub const INACTIVEONMATCH: Self = Self(0x02);
-            #[doc = "OCyREF toggles when TIMx_CNT=TIMx_CCRy"]
-            pub const TOGGLE: Self = Self(0x03);
-            #[doc = "OCyREF is forced low"]
-            pub const FORCEINACTIVE: Self = Self(0x04);
-            #[doc = "OCyREF is forced high"]
-            pub const FORCEACTIVE: Self = Self(0x05);
-            #[doc = "In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active"]
-            pub const PWMMODE1: Self = Self(0x06);
-            #[doc = "Inversely to PwmMode1"]
-            pub const PWMMODE2: Self = Self(0x07);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Icf(pub u8);
-        impl Icf {
-            #[doc = "No filter, sampling is done at fDTS"]
-            pub const NOFILTER: Self = Self(0);
-            #[doc = "fSAMPLING=fCK_INT, N=2"]
-            pub const FCK_INT_N2: Self = Self(0x01);
-            #[doc = "fSAMPLING=fCK_INT, N=4"]
-            pub const FCK_INT_N4: Self = Self(0x02);
-            #[doc = "fSAMPLING=fCK_INT, N=8"]
-            pub const FCK_INT_N8: Self = Self(0x03);
-            #[doc = "fSAMPLING=fDTS/2, N=6"]
-            pub const FDTS_DIV2_N6: Self = Self(0x04);
-            #[doc = "fSAMPLING=fDTS/2, N=8"]
-            pub const FDTS_DIV2_N8: Self = Self(0x05);
-            #[doc = "fSAMPLING=fDTS/4, N=6"]
-            pub const FDTS_DIV4_N6: Self = Self(0x06);
-            #[doc = "fSAMPLING=fDTS/4, N=8"]
-            pub const FDTS_DIV4_N8: Self = Self(0x07);
-            #[doc = "fSAMPLING=fDTS/8, N=6"]
-            pub const FDTS_DIV8_N6: Self = Self(0x08);
-            #[doc = "fSAMPLING=fDTS/8, N=8"]
-            pub const FDTS_DIV8_N8: Self = Self(0x09);
-            #[doc = "fSAMPLING=fDTS/16, N=5"]
-            pub const FDTS_DIV16_N5: Self = Self(0x0a);
-            #[doc = "fSAMPLING=fDTS/16, N=6"]
-            pub const FDTS_DIV16_N6: Self = Self(0x0b);
-            #[doc = "fSAMPLING=fDTS/16, N=8"]
-            pub const FDTS_DIV16_N8: Self = Self(0x0c);
-            #[doc = "fSAMPLING=fDTS/32, N=5"]
-            pub const FDTS_DIV32_N5: Self = Self(0x0d);
-            #[doc = "fSAMPLING=fDTS/32, N=6"]
-            pub const FDTS_DIV32_N6: Self = Self(0x0e);
-            #[doc = "fSAMPLING=fDTS/32, N=8"]
-            pub const FDTS_DIV32_N8: Self = Self(0x0f);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Etps(pub u8);
-        impl Etps {
-            #[doc = "Prescaler OFF"]
-            pub const DIV1: Self = Self(0);
-            #[doc = "ETRP frequency divided by 2"]
-            pub const DIV2: Self = Self(0x01);
-            #[doc = "ETRP frequency divided by 4"]
-            pub const DIV4: Self = Self(0x02);
-            #[doc = "ETRP frequency divided by 8"]
-            pub const DIV8: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Urs(pub u8);
-        impl Urs {
-            #[doc = "Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request"]
-            pub const ANYEVENT: Self = Self(0);
-            #[doc = "Only counter overflow/underflow generates an update interrupt or DMA request"]
-            pub const COUNTERONLY: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ece(pub u8);
-        impl Ece {
-            #[doc = "External clock mode 2 disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "External clock mode 2 enabled. The counter is clocked by any active edge on the ETRF signal."]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct CcmrOutputCcs(pub u8);
-        impl CcmrOutputCcs {
-            #[doc = "CCx channel is configured as output"]
-            pub const OUTPUT: Self = Self(0);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Etp(pub u8);
-        impl Etp {
-            #[doc = "ETR is noninverted, active at high level or rising edge"]
-            pub const NOTINVERTED: Self = Self(0);
-            #[doc = "ETR is inverted, active at low level or falling edge"]
-            pub const INVERTED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Opm(pub u8);
-        impl Opm {
-            #[doc = "Counter is not stopped at update event"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Counter stops counting at the next update event (clearing the CEN bit)"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Arpe(pub u8);
-        impl Arpe {
-            #[doc = "TIMx_APRR register is not buffered"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "TIMx_APRR register is buffered"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ocpe(pub u8);
-        impl Ocpe {
-            #[doc = "Preload register on CCR2 disabled. New values written to CCR2 are taken into account immediately"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Preload register on CCR2 enabled. Preload value is loaded into active register on each update event"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Cms(pub u8);
-        impl Cms {
-            #[doc = "The counter counts up or down depending on the direction bit"]
-            pub const EDGEALIGNED: Self = Self(0);
-            #[doc = "The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down."]
-            pub const CENTERALIGNED1: Self = Self(0x01);
-            #[doc = "The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up."]
-            pub const CENTERALIGNED2: Self = Self(0x02);
-            #[doc = "The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down."]
-            pub const CENTERALIGNED3: Self = Self(0x03);
-        }
-    }
-}
-pub mod rcc_l0 {
-    use crate::generic::*;
-    #[doc = "Reset and clock control"]
-    #[derive(Copy, Clone)]
-    pub struct Rcc(pub *mut u8);
-    unsafe impl Send for Rcc {}
-    unsafe impl Sync for Rcc {}
-    impl Rcc {
-        #[doc = "Clock control register"]
-        pub fn cr(self) -> Reg<regs::Cr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "Internal clock sources calibration register"]
-        pub fn icscr(self) -> Reg<regs::Icscr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "Clock recovery RC register"]
-        pub fn crrcr(self) -> Reg<regs::Crrcr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
-        }
-        #[doc = "Clock configuration register"]
-        pub fn cfgr(self) -> Reg<regs::Cfgr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(12usize)) }
-        }
-        #[doc = "Clock interrupt enable register"]
-        pub fn cier(self) -> Reg<regs::Cier, R> {
-            unsafe { Reg::from_ptr(self.0.add(16usize)) }
-        }
-        #[doc = "Clock interrupt flag register"]
-        pub fn cifr(self) -> Reg<regs::Cifr, R> {
-            unsafe { Reg::from_ptr(self.0.add(20usize)) }
-        }
-        #[doc = "Clock interrupt clear register"]
-        pub fn cicr(self) -> Reg<regs::Cicr, R> {
-            unsafe { Reg::from_ptr(self.0.add(24usize)) }
-        }
-        #[doc = "GPIO reset register"]
-        pub fn ioprstr(self) -> Reg<regs::Ioprstr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(28usize)) }
-        }
-        #[doc = "AHB peripheral reset register"]
-        pub fn ahbrstr(self) -> Reg<regs::Ahbrstr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(32usize)) }
-        }
-        #[doc = "APB2 peripheral reset register"]
-        pub fn apb2rstr(self) -> Reg<regs::Apb2rstr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(36usize)) }
-        }
-        #[doc = "APB1 peripheral reset register"]
-        pub fn apb1rstr(self) -> Reg<regs::Apb1rstr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(40usize)) }
-        }
-        #[doc = "GPIO clock enable register"]
-        pub fn iopenr(self) -> Reg<regs::Iopenr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(44usize)) }
-        }
-        #[doc = "AHB peripheral clock enable register"]
-        pub fn ahbenr(self) -> Reg<regs::Ahbenr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(48usize)) }
-        }
-        #[doc = "APB2 peripheral clock enable register"]
-        pub fn apb2enr(self) -> Reg<regs::Apb2enr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(52usize)) }
-        }
-        #[doc = "APB1 peripheral clock enable register"]
-        pub fn apb1enr(self) -> Reg<regs::Apb1enr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(56usize)) }
-        }
-        #[doc = "GPIO clock enable in sleep mode register"]
-        pub fn iopsmen(self) -> Reg<regs::Iopsmen, RW> {
-            unsafe { Reg::from_ptr(self.0.add(60usize)) }
-        }
-        #[doc = "AHB peripheral clock enable in sleep mode register"]
-        pub fn ahbsmenr(self) -> Reg<regs::Ahbsmenr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(64usize)) }
-        }
-        #[doc = "APB2 peripheral clock enable in sleep mode register"]
-        pub fn apb2smenr(self) -> Reg<regs::Apb2smenr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(68usize)) }
-        }
-        #[doc = "APB1 peripheral clock enable in sleep mode register"]
-        pub fn apb1smenr(self) -> Reg<regs::Apb1smenr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(72usize)) }
-        }
-        #[doc = "Clock configuration register"]
-        pub fn ccipr(self) -> Reg<regs::Ccipr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(76usize)) }
-        }
-        #[doc = "Control and status register"]
-        pub fn csr(self) -> Reg<regs::Csr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(80usize)) }
-        }
-    }
-    pub mod regs {
-        use crate::generic::*;
-        #[doc = "APB1 peripheral clock enable register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb1enr(pub u32);
-        impl Apb1enr {
-            #[doc = "Timer2 clock enable bit"]
-            pub const fn tim2en(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "Timer2 clock enable bit"]
-            pub fn set_tim2en(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Timer3 clock enable bit"]
-            pub const fn tim3en(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "Timer3 clock enable bit"]
-            pub fn set_tim3en(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Timer 6 clock enable bit"]
-            pub const fn tim6en(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "Timer 6 clock enable bit"]
-            pub fn set_tim6en(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Timer 7 clock enable bit"]
-            pub const fn tim7en(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "Timer 7 clock enable bit"]
-            pub fn set_tim7en(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Window watchdog clock enable bit"]
-            pub const fn wwdgen(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 11usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "Window watchdog clock enable bit"]
-            pub fn set_wwdgen(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
-            }
-            #[doc = "SPI2 clock enable bit"]
-            pub const fn spi2en(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "SPI2 clock enable bit"]
-            pub fn set_spi2en(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "UART2 clock enable bit"]
-            pub const fn usart2en(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 17usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "UART2 clock enable bit"]
-            pub fn set_usart2en(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
-            }
-            #[doc = "LPUART1 clock enable bit"]
-            pub const fn lpuart1en(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 18usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "LPUART1 clock enable bit"]
-            pub fn set_lpuart1en(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
-            }
-            #[doc = "USART4 clock enable bit"]
-            pub const fn usart4en(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 19usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "USART4 clock enable bit"]
-            pub fn set_usart4en(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
-            }
-            #[doc = "USART5 clock enable bit"]
-            pub const fn usart5en(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 20usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "USART5 clock enable bit"]
-            pub fn set_usart5en(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize);
-            }
-            #[doc = "I2C1 clock enable bit"]
-            pub const fn i2c1en(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 21usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "I2C1 clock enable bit"]
-            pub fn set_i2c1en(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
-            }
-            #[doc = "I2C2 clock enable bit"]
-            pub const fn i2c2en(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 22usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "I2C2 clock enable bit"]
-            pub fn set_i2c2en(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
-            }
-            #[doc = "USB clock enable bit"]
-            pub const fn usben(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 23usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "USB clock enable bit"]
-            pub fn set_usben(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize);
-            }
-            #[doc = "Clock recovery system clock enable bit"]
-            pub const fn crsen(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 27usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "Clock recovery system clock enable bit"]
-            pub fn set_crsen(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
-            }
-            #[doc = "Power interface clock enable bit"]
-            pub const fn pwren(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "Power interface clock enable bit"]
-            pub fn set_pwren(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
-            }
-            #[doc = "DAC interface clock enable bit"]
-            pub const fn dacen(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 29usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "DAC interface clock enable bit"]
-            pub fn set_dacen(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
-            }
-            #[doc = "I2C3 clock enable bit"]
-            pub const fn i2c3en(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 30usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "I2C3 clock enable bit"]
-            pub fn set_i2c3en(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize);
-            }
-            #[doc = "Low power timer clock enable bit"]
-            pub const fn lptim1en(&self) -> super::vals::Lptimen {
-                let val = (self.0 >> 31usize) & 0x01;
-                super::vals::Lptimen(val as u8)
-            }
-            #[doc = "Low power timer clock enable bit"]
-            pub fn set_lptim1en(&mut self, val: super::vals::Lptimen) {
-                self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
-            }
-        }
-        impl Default for Apb1enr {
-            fn default() -> Apb1enr {
-                Apb1enr(0)
-            }
-        }
-        #[doc = "AHB peripheral reset register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ahbrstr(pub u32);
-        impl Ahbrstr {
-            #[doc = "DMA reset"]
-            pub const fn dmarst(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DMA reset"]
-            pub fn set_dmarst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Memory interface reset"]
-            pub const fn mifrst(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Memory interface reset"]
-            pub fn set_mifrst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Test integration module reset"]
-            pub const fn crcrst(&self) -> bool {
-                let val = (self.0 >> 12usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Test integration module reset"]
-            pub fn set_crcrst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
-            }
-            #[doc = "Touch Sensing reset"]
-            pub const fn touchrst(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Touch Sensing reset"]
-            pub fn set_touchrst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
-            #[doc = "Random Number Generator module reset"]
-            pub const fn rngrst(&self) -> bool {
-                let val = (self.0 >> 20usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Random Number Generator module reset"]
-            pub fn set_rngrst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
-            }
-            #[doc = "Crypto module reset"]
-            pub const fn cryprst(&self) -> bool {
-                let val = (self.0 >> 24usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Crypto module reset"]
-            pub fn set_cryprst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize);
-            }
-        }
-        impl Default for Ahbrstr {
-            fn default() -> Ahbrstr {
-                Ahbrstr(0)
-            }
-        }
-        #[doc = "GPIO reset register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ioprstr(pub u32);
-        impl Ioprstr {
-            #[doc = "I/O port A reset"]
-            pub const fn ioparst(&self) -> super::vals::Iophrst {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Iophrst(val as u8)
-            }
-            #[doc = "I/O port A reset"]
-            pub fn set_ioparst(&mut self, val: super::vals::Iophrst) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "I/O port B reset"]
-            pub const fn iopbrst(&self) -> super::vals::Iophrst {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Iophrst(val as u8)
-            }
-            #[doc = "I/O port B reset"]
-            pub fn set_iopbrst(&mut self, val: super::vals::Iophrst) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "I/O port A reset"]
-            pub const fn iopcrst(&self) -> super::vals::Iophrst {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Iophrst(val as u8)
-            }
-            #[doc = "I/O port A reset"]
-            pub fn set_iopcrst(&mut self, val: super::vals::Iophrst) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "I/O port D reset"]
-            pub const fn iopdrst(&self) -> super::vals::Iophrst {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Iophrst(val as u8)
-            }
-            #[doc = "I/O port D reset"]
-            pub fn set_iopdrst(&mut self, val: super::vals::Iophrst) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "I/O port E reset"]
-            pub const fn ioperst(&self) -> super::vals::Iophrst {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Iophrst(val as u8)
-            }
-            #[doc = "I/O port E reset"]
-            pub fn set_ioperst(&mut self, val: super::vals::Iophrst) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "I/O port H reset"]
-            pub const fn iophrst(&self) -> super::vals::Iophrst {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Iophrst(val as u8)
-            }
-            #[doc = "I/O port H reset"]
-            pub fn set_iophrst(&mut self, val: super::vals::Iophrst) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-        }
-        impl Default for Ioprstr {
-            fn default() -> Ioprstr {
-                Ioprstr(0)
-            }
-        }
-        #[doc = "APB2 peripheral clock enable in sleep mode register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb2smenr(pub u32);
-        impl Apb2smenr {
-            #[doc = "System configuration controller clock enable during sleep mode bit"]
-            pub const fn syscfgsmen(&self) -> super::vals::Dbgsmen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Dbgsmen(val as u8)
-            }
-            #[doc = "System configuration controller clock enable during sleep mode bit"]
-            pub fn set_syscfgsmen(&mut self, val: super::vals::Dbgsmen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "TIM21 timer clock enable during sleep mode bit"]
-            pub const fn tim21smen(&self) -> super::vals::Dbgsmen {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Dbgsmen(val as u8)
-            }
-            #[doc = "TIM21 timer clock enable during sleep mode bit"]
-            pub fn set_tim21smen(&mut self, val: super::vals::Dbgsmen) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "TIM22 timer clock enable during sleep mode bit"]
-            pub const fn tim22smen(&self) -> super::vals::Dbgsmen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Dbgsmen(val as u8)
-            }
-            #[doc = "TIM22 timer clock enable during sleep mode bit"]
-            pub fn set_tim22smen(&mut self, val: super::vals::Dbgsmen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "ADC clock enable during sleep mode bit"]
-            pub const fn adcsmen(&self) -> super::vals::Dbgsmen {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Dbgsmen(val as u8)
-            }
-            #[doc = "ADC clock enable during sleep mode bit"]
-            pub fn set_adcsmen(&mut self, val: super::vals::Dbgsmen) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "SPI1 clock enable during sleep mode bit"]
-            pub const fn spi1smen(&self) -> super::vals::Dbgsmen {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Dbgsmen(val as u8)
-            }
-            #[doc = "SPI1 clock enable during sleep mode bit"]
-            pub fn set_spi1smen(&mut self, val: super::vals::Dbgsmen) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "USART1 clock enable during sleep mode bit"]
-            pub const fn usart1smen(&self) -> super::vals::Dbgsmen {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Dbgsmen(val as u8)
-            }
-            #[doc = "USART1 clock enable during sleep mode bit"]
-            pub fn set_usart1smen(&mut self, val: super::vals::Dbgsmen) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "DBG clock enable during sleep mode bit"]
-            pub const fn dbgsmen(&self) -> super::vals::Dbgsmen {
-                let val = (self.0 >> 22usize) & 0x01;
-                super::vals::Dbgsmen(val as u8)
-            }
-            #[doc = "DBG clock enable during sleep mode bit"]
-            pub fn set_dbgsmen(&mut self, val: super::vals::Dbgsmen) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
-            }
-        }
-        impl Default for Apb2smenr {
-            fn default() -> Apb2smenr {
-                Apb2smenr(0)
-            }
-        }
-        #[doc = "GPIO clock enable in sleep mode register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Iopsmen(pub u32);
-        impl Iopsmen {
-            #[doc = "IOPASMEN"]
-            pub const fn iopasmen(&self) -> super::vals::Iophsmen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Iophsmen(val as u8)
-            }
-            #[doc = "IOPASMEN"]
-            pub fn set_iopasmen(&mut self, val: super::vals::Iophsmen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "IOPBSMEN"]
-            pub const fn iopbsmen(&self) -> super::vals::Iophsmen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Iophsmen(val as u8)
-            }
-            #[doc = "IOPBSMEN"]
-            pub fn set_iopbsmen(&mut self, val: super::vals::Iophsmen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "IOPCSMEN"]
-            pub const fn iopcsmen(&self) -> super::vals::Iophsmen {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Iophsmen(val as u8)
-            }
-            #[doc = "IOPCSMEN"]
-            pub fn set_iopcsmen(&mut self, val: super::vals::Iophsmen) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "IOPDSMEN"]
-            pub const fn iopdsmen(&self) -> super::vals::Iophsmen {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Iophsmen(val as u8)
-            }
-            #[doc = "IOPDSMEN"]
-            pub fn set_iopdsmen(&mut self, val: super::vals::Iophsmen) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Port E clock enable during Sleep mode bit"]
-            pub const fn iopesmen(&self) -> super::vals::Iophsmen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Iophsmen(val as u8)
-            }
-            #[doc = "Port E clock enable during Sleep mode bit"]
-            pub fn set_iopesmen(&mut self, val: super::vals::Iophsmen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "IOPHSMEN"]
-            pub const fn iophsmen(&self) -> super::vals::Iophsmen {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Iophsmen(val as u8)
-            }
-            #[doc = "IOPHSMEN"]
-            pub fn set_iophsmen(&mut self, val: super::vals::Iophsmen) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-        }
-        impl Default for Iopsmen {
-            fn default() -> Iopsmen {
-                Iopsmen(0)
-            }
-        }
-        #[doc = "GPIO clock enable register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Iopenr(pub u32);
-        impl Iopenr {
-            #[doc = "IO port A clock enable bit"]
-            pub const fn iopaen(&self) -> super::vals::Iophen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Iophen(val as u8)
-            }
-            #[doc = "IO port A clock enable bit"]
-            pub fn set_iopaen(&mut self, val: super::vals::Iophen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "IO port B clock enable bit"]
-            pub const fn iopben(&self) -> super::vals::Iophen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Iophen(val as u8)
-            }
-            #[doc = "IO port B clock enable bit"]
-            pub fn set_iopben(&mut self, val: super::vals::Iophen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "IO port A clock enable bit"]
-            pub const fn iopcen(&self) -> super::vals::Iophen {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Iophen(val as u8)
-            }
-            #[doc = "IO port A clock enable bit"]
-            pub fn set_iopcen(&mut self, val: super::vals::Iophen) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "I/O port D clock enable bit"]
-            pub const fn iopden(&self) -> super::vals::Iophen {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Iophen(val as u8)
-            }
-            #[doc = "I/O port D clock enable bit"]
-            pub fn set_iopden(&mut self, val: super::vals::Iophen) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "I/O port E clock enable bit"]
-            pub const fn iopeen(&self) -> super::vals::Iophen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Iophen(val as u8)
-            }
-            #[doc = "I/O port E clock enable bit"]
-            pub fn set_iopeen(&mut self, val: super::vals::Iophen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "I/O port H clock enable bit"]
-            pub const fn iophen(&self) -> super::vals::Iophen {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Iophen(val as u8)
-            }
-            #[doc = "I/O port H clock enable bit"]
-            pub fn set_iophen(&mut self, val: super::vals::Iophen) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-        }
-        impl Default for Iopenr {
-            fn default() -> Iopenr {
-                Iopenr(0)
-            }
-        }
-        #[doc = "Clock interrupt enable register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cier(pub u32);
-        impl Cier {
-            #[doc = "LSI ready interrupt flag"]
-            pub const fn lsirdyie(&self) -> super::vals::Hsirdyie {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Hsirdyie(val as u8)
-            }
-            #[doc = "LSI ready interrupt flag"]
-            pub fn set_lsirdyie(&mut self, val: super::vals::Hsirdyie) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "LSE ready interrupt flag"]
-            pub const fn lserdyie(&self) -> super::vals::Hsirdyie {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Hsirdyie(val as u8)
-            }
-            #[doc = "LSE ready interrupt flag"]
-            pub fn set_lserdyie(&mut self, val: super::vals::Hsirdyie) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "HSI16 ready interrupt flag"]
-            pub const fn hsi16rdyie(&self) -> super::vals::Hsirdyie {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Hsirdyie(val as u8)
-            }
-            #[doc = "HSI16 ready interrupt flag"]
-            pub fn set_hsi16rdyie(&mut self, val: super::vals::Hsirdyie) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "HSE ready interrupt flag"]
-            pub const fn hserdyie(&self) -> super::vals::Hsirdyie {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Hsirdyie(val as u8)
-            }
-            #[doc = "HSE ready interrupt flag"]
-            pub fn set_hserdyie(&mut self, val: super::vals::Hsirdyie) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "PLL ready interrupt flag"]
-            pub const fn pllrdyie(&self) -> super::vals::Hsirdyie {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Hsirdyie(val as u8)
-            }
-            #[doc = "PLL ready interrupt flag"]
-            pub fn set_pllrdyie(&mut self, val: super::vals::Hsirdyie) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "MSI ready interrupt flag"]
-            pub const fn msirdyie(&self) -> super::vals::Hsirdyie {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Hsirdyie(val as u8)
-            }
-            #[doc = "MSI ready interrupt flag"]
-            pub fn set_msirdyie(&mut self, val: super::vals::Hsirdyie) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "HSI48 ready interrupt flag"]
-            pub const fn hsi48rdyie(&self) -> super::vals::Hsirdyie {
-                let val = (self.0 >> 6usize) & 0x01;
-                super::vals::Hsirdyie(val as u8)
-            }
-            #[doc = "HSI48 ready interrupt flag"]
-            pub fn set_hsi48rdyie(&mut self, val: super::vals::Hsirdyie) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
-            }
-            #[doc = "LSE CSS interrupt flag"]
-            pub const fn csslse(&self) -> super::vals::Csslse {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Csslse(val as u8)
-            }
-            #[doc = "LSE CSS interrupt flag"]
-            pub fn set_csslse(&mut self, val: super::vals::Csslse) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-        }
-        impl Default for Cier {
-            fn default() -> Cier {
-                Cier(0)
-            }
-        }
-        #[doc = "Clock recovery RC register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Crrcr(pub u32);
-        impl Crrcr {
-            #[doc = "48MHz HSI clock enable bit"]
-            pub const fn hsi48on(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "48MHz HSI clock enable bit"]
-            pub fn set_hsi48on(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "48MHz HSI clock ready flag"]
-            pub const fn hsi48rdy(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "48MHz HSI clock ready flag"]
-            pub fn set_hsi48rdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "48 MHz HSI clock divided by 6 output enable"]
-            pub const fn hsi48div6en(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "48 MHz HSI clock divided by 6 output enable"]
-            pub fn set_hsi48div6en(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "48 MHz HSI clock calibration"]
-            pub const fn hsi48cal(&self) -> u8 {
-                let val = (self.0 >> 8usize) & 0xff;
-                val as u8
-            }
-            #[doc = "48 MHz HSI clock calibration"]
-            pub fn set_hsi48cal(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize);
-            }
-        }
-        impl Default for Crrcr {
-            fn default() -> Crrcr {
-                Crrcr(0)
-            }
-        }
-        #[doc = "Internal clock sources calibration register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Icscr(pub u32);
-        impl Icscr {
-            #[doc = "nternal high speed clock calibration"]
-            pub const fn hsi16cal(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0xff;
-                val as u8
-            }
-            #[doc = "nternal high speed clock calibration"]
-            pub fn set_hsi16cal(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
-            }
-            #[doc = "High speed internal clock trimming"]
-            pub const fn hsi16trim(&self) -> u8 {
-                let val = (self.0 >> 8usize) & 0x1f;
-                val as u8
-            }
-            #[doc = "High speed internal clock trimming"]
-            pub fn set_hsi16trim(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x1f << 8usize)) | (((val as u32) & 0x1f) << 8usize);
-            }
-            #[doc = "MSI clock ranges"]
-            pub const fn msirange(&self) -> super::vals::Msirange {
-                let val = (self.0 >> 13usize) & 0x07;
-                super::vals::Msirange(val as u8)
-            }
-            #[doc = "MSI clock ranges"]
-            pub fn set_msirange(&mut self, val: super::vals::Msirange) {
-                self.0 = (self.0 & !(0x07 << 13usize)) | (((val.0 as u32) & 0x07) << 13usize);
-            }
-            #[doc = "MSI clock calibration"]
-            pub const fn msical(&self) -> u8 {
-                let val = (self.0 >> 16usize) & 0xff;
-                val as u8
-            }
-            #[doc = "MSI clock calibration"]
-            pub fn set_msical(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 16usize)) | (((val as u32) & 0xff) << 16usize);
-            }
-            #[doc = "MSI clock trimming"]
-            pub const fn msitrim(&self) -> u8 {
-                let val = (self.0 >> 24usize) & 0xff;
-                val as u8
-            }
-            #[doc = "MSI clock trimming"]
-            pub fn set_msitrim(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 24usize)) | (((val as u32) & 0xff) << 24usize);
-            }
-        }
-        impl Default for Icscr {
-            fn default() -> Icscr {
-                Icscr(0)
-            }
-        }
-        #[doc = "Control and status register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Csr(pub u32);
-        impl Csr {
-            #[doc = "Internal low-speed oscillator enable"]
-            pub const fn lsion(&self) -> super::vals::Csslseon {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Csslseon(val as u8)
-            }
-            #[doc = "Internal low-speed oscillator enable"]
-            pub fn set_lsion(&mut self, val: super::vals::Csslseon) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Internal low-speed oscillator ready bit"]
-            pub const fn lsirdy(&self) -> super::vals::Lserdy {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Lserdy(val as u8)
-            }
-            #[doc = "Internal low-speed oscillator ready bit"]
-            pub fn set_lsirdy(&mut self, val: super::vals::Lserdy) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "External low-speed oscillator enable bit"]
-            pub const fn lseon(&self) -> super::vals::Csslseon {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::Csslseon(val as u8)
-            }
-            #[doc = "External low-speed oscillator enable bit"]
-            pub fn set_lseon(&mut self, val: super::vals::Csslseon) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
-            }
-            #[doc = "External low-speed oscillator ready bit"]
-            pub const fn lserdy(&self) -> super::vals::Lserdy {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Lserdy(val as u8)
-            }
-            #[doc = "External low-speed oscillator ready bit"]
-            pub fn set_lserdy(&mut self, val: super::vals::Lserdy) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "External low-speed oscillator bypass bit"]
-            pub const fn lsebyp(&self) -> super::vals::Lsebyp {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Lsebyp(val as u8)
-            }
-            #[doc = "External low-speed oscillator bypass bit"]
-            pub fn set_lsebyp(&mut self, val: super::vals::Lsebyp) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "LSEDRV"]
-            pub const fn lsedrv(&self) -> super::vals::Lsedrv {
-                let val = (self.0 >> 11usize) & 0x03;
-                super::vals::Lsedrv(val as u8)
-            }
-            #[doc = "LSEDRV"]
-            pub fn set_lsedrv(&mut self, val: super::vals::Lsedrv) {
-                self.0 = (self.0 & !(0x03 << 11usize)) | (((val.0 as u32) & 0x03) << 11usize);
-            }
-            #[doc = "CSSLSEON"]
-            pub const fn csslseon(&self) -> super::vals::Csslseon {
-                let val = (self.0 >> 13usize) & 0x01;
-                super::vals::Csslseon(val as u8)
-            }
-            #[doc = "CSSLSEON"]
-            pub fn set_csslseon(&mut self, val: super::vals::Csslseon) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize);
-            }
-            #[doc = "CSS on LSE failure detection flag"]
-            pub const fn csslsed(&self) -> super::vals::Csslsed {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Csslsed(val as u8)
-            }
-            #[doc = "CSS on LSE failure detection flag"]
-            pub fn set_csslsed(&mut self, val: super::vals::Csslsed) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "RTC and LCD clock source selection bits"]
-            pub const fn rtcsel(&self) -> super::vals::Rtcsel {
-                let val = (self.0 >> 16usize) & 0x03;
-                super::vals::Rtcsel(val as u8)
-            }
-            #[doc = "RTC and LCD clock source selection bits"]
-            pub fn set_rtcsel(&mut self, val: super::vals::Rtcsel) {
-                self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize);
-            }
-            #[doc = "RTC clock enable bit"]
-            pub const fn rtcen(&self) -> super::vals::Rtcen {
-                let val = (self.0 >> 18usize) & 0x01;
-                super::vals::Rtcen(val as u8)
-            }
-            #[doc = "RTC clock enable bit"]
-            pub fn set_rtcen(&mut self, val: super::vals::Rtcen) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
-            }
-            #[doc = "RTC software reset bit"]
-            pub const fn rtcrst(&self) -> bool {
-                let val = (self.0 >> 19usize) & 0x01;
-                val != 0
-            }
-            #[doc = "RTC software reset bit"]
-            pub fn set_rtcrst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize);
-            }
-            #[doc = "Remove reset flag"]
-            pub const fn rmvf(&self) -> bool {
-                let val = (self.0 >> 24usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Remove reset flag"]
-            pub fn set_rmvf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize);
-            }
-            #[doc = "OBLRSTF"]
-            pub const fn oblrstf(&self) -> bool {
-                let val = (self.0 >> 25usize) & 0x01;
-                val != 0
-            }
-            #[doc = "OBLRSTF"]
-            pub fn set_oblrstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize);
-            }
-            #[doc = "PIN reset flag"]
-            pub const fn pinrstf(&self) -> bool {
-                let val = (self.0 >> 26usize) & 0x01;
-                val != 0
-            }
-            #[doc = "PIN reset flag"]
-            pub fn set_pinrstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
-            }
-            #[doc = "POR/PDR reset flag"]
-            pub const fn porrstf(&self) -> bool {
-                let val = (self.0 >> 27usize) & 0x01;
-                val != 0
-            }
-            #[doc = "POR/PDR reset flag"]
-            pub fn set_porrstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize);
-            }
-            #[doc = "Software reset flag"]
-            pub const fn sftrstf(&self) -> bool {
-                let val = (self.0 >> 28usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Software reset flag"]
-            pub fn set_sftrstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize);
-            }
-            #[doc = "Independent watchdog reset flag"]
-            pub const fn iwdgrstf(&self) -> bool {
-                let val = (self.0 >> 29usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Independent watchdog reset flag"]
-            pub fn set_iwdgrstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize);
-            }
-            #[doc = "Window watchdog reset flag"]
-            pub const fn wwdgrstf(&self) -> bool {
-                let val = (self.0 >> 30usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Window watchdog reset flag"]
-            pub fn set_wwdgrstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize);
-            }
-            #[doc = "Low-power reset flag"]
-            pub const fn lpwrrstf(&self) -> bool {
-                let val = (self.0 >> 31usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Low-power reset flag"]
-            pub fn set_lpwrrstf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
-            }
-        }
-        impl Default for Csr {
-            fn default() -> Csr {
-                Csr(0)
-            }
-        }
-        #[doc = "Clock configuration register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ccipr(pub u32);
-        impl Ccipr {
-            #[doc = "USART1 clock source selection bits"]
-            pub const fn usart1sel(&self) -> super::vals::Lpuartsel {
-                let val = (self.0 >> 0usize) & 0x03;
-                super::vals::Lpuartsel(val as u8)
-            }
-            #[doc = "USART1 clock source selection bits"]
-            pub fn set_usart1sel(&mut self, val: super::vals::Lpuartsel) {
-                self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize);
-            }
-            #[doc = "USART2 clock source selection bits"]
-            pub const fn usart2sel(&self) -> super::vals::Lpuartsel {
-                let val = (self.0 >> 2usize) & 0x03;
-                super::vals::Lpuartsel(val as u8)
-            }
-            #[doc = "USART2 clock source selection bits"]
-            pub fn set_usart2sel(&mut self, val: super::vals::Lpuartsel) {
-                self.0 = (self.0 & !(0x03 << 2usize)) | (((val.0 as u32) & 0x03) << 2usize);
-            }
-            #[doc = "LPUART1 clock source selection bits"]
-            pub const fn lpuart1sel(&self) -> super::vals::Lpuartsel {
+            #[doc = "FMC memory mapping swap"]
+            pub const fn swp_fmc(&self) -> u8 {
                 let val = (self.0 >> 10usize) & 0x03;
-                super::vals::Lpuartsel(val as u8)
+                val as u8
             }
-            #[doc = "LPUART1 clock source selection bits"]
-            pub fn set_lpuart1sel(&mut self, val: super::vals::Lpuartsel) {
-                self.0 = (self.0 & !(0x03 << 10usize)) | (((val.0 as u32) & 0x03) << 10usize);
-            }
-            #[doc = "I2C1 clock source selection bits"]
-            pub const fn i2c1sel(&self) -> super::vals::Icsel {
-                let val = (self.0 >> 12usize) & 0x03;
-                super::vals::Icsel(val as u8)
-            }
-            #[doc = "I2C1 clock source selection bits"]
-            pub fn set_i2c1sel(&mut self, val: super::vals::Icsel) {
-                self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize);
-            }
-            #[doc = "I2C3 clock source selection bits"]
-            pub const fn i2c3sel(&self) -> super::vals::Icsel {
-                let val = (self.0 >> 16usize) & 0x03;
-                super::vals::Icsel(val as u8)
-            }
-            #[doc = "I2C3 clock source selection bits"]
-            pub fn set_i2c3sel(&mut self, val: super::vals::Icsel) {
-                self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize);
-            }
-            #[doc = "Low Power Timer clock source selection bits"]
-            pub const fn lptim1sel(&self) -> super::vals::Lptimsel {
-                let val = (self.0 >> 18usize) & 0x03;
-                super::vals::Lptimsel(val as u8)
-            }
-            #[doc = "Low Power Timer clock source selection bits"]
-            pub fn set_lptim1sel(&mut self, val: super::vals::Lptimsel) {
-                self.0 = (self.0 & !(0x03 << 18usize)) | (((val.0 as u32) & 0x03) << 18usize);
-            }
-            #[doc = "48 MHz HSI48 clock source selection bit"]
-            pub const fn hsi48msel(&self) -> bool {
-                let val = (self.0 >> 26usize) & 0x01;
-                val != 0
-            }
-            #[doc = "48 MHz HSI48 clock source selection bit"]
-            pub fn set_hsi48msel(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
-            }
-        }
-        impl Default for Ccipr {
-            fn default() -> Ccipr {
-                Ccipr(0)
-            }
-        }
-        #[doc = "APB1 peripheral clock enable in sleep mode register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb1smenr(pub u32);
-        impl Apb1smenr {
-            #[doc = "Timer2 clock enable during sleep mode bit"]
-            pub const fn tim2smen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "Timer2 clock enable during sleep mode bit"]
-            pub fn set_tim2smen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Timer3 clock enable during Sleep mode bit"]
-            pub const fn tim3smen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "Timer3 clock enable during Sleep mode bit"]
-            pub fn set_tim3smen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Timer 6 clock enable during sleep mode bit"]
-            pub const fn tim6smen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "Timer 6 clock enable during sleep mode bit"]
-            pub fn set_tim6smen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Timer 7 clock enable during Sleep mode bit"]
-            pub const fn tim7smen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "Timer 7 clock enable during Sleep mode bit"]
-            pub fn set_tim7smen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Window watchdog clock enable during sleep mode bit"]
-            pub const fn wwdgsmen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 11usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "Window watchdog clock enable during sleep mode bit"]
-            pub fn set_wwdgsmen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
-            }
-            #[doc = "SPI2 clock enable during sleep mode bit"]
-            pub const fn spi2smen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "SPI2 clock enable during sleep mode bit"]
-            pub fn set_spi2smen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "UART2 clock enable during sleep mode bit"]
-            pub const fn usart2smen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 17usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "UART2 clock enable during sleep mode bit"]
-            pub fn set_usart2smen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
-            }
-            #[doc = "LPUART1 clock enable during sleep mode bit"]
-            pub const fn lpuart1smen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 18usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "LPUART1 clock enable during sleep mode bit"]
-            pub fn set_lpuart1smen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
-            }
-            #[doc = "USART4 clock enable during Sleep mode bit"]
-            pub const fn usart4smen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 19usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "USART4 clock enable during Sleep mode bit"]
-            pub fn set_usart4smen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
-            }
-            #[doc = "USART5 clock enable during Sleep mode bit"]
-            pub const fn usart5smen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 20usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "USART5 clock enable during Sleep mode bit"]
-            pub fn set_usart5smen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize);
-            }
-            #[doc = "I2C1 clock enable during sleep mode bit"]
-            pub const fn i2c1smen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 21usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "I2C1 clock enable during sleep mode bit"]
-            pub fn set_i2c1smen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val.0 as u32) & 0x01) << 21usize);
-            }
-            #[doc = "I2C2 clock enable during sleep mode bit"]
-            pub const fn i2c2smen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 22usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "I2C2 clock enable during sleep mode bit"]
-            pub fn set_i2c2smen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
-            }
-            #[doc = "USB clock enable during sleep mode bit"]
-            pub const fn usbsmen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 23usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "USB clock enable during sleep mode bit"]
-            pub fn set_usbsmen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 23usize)) | (((val.0 as u32) & 0x01) << 23usize);
-            }
-            #[doc = "Clock recovery system clock enable during sleep mode bit"]
-            pub const fn crssmen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 27usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "Clock recovery system clock enable during sleep mode bit"]
-            pub fn set_crssmen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 27usize)) | (((val.0 as u32) & 0x01) << 27usize);
-            }
-            #[doc = "Power interface clock enable during sleep mode bit"]
-            pub const fn pwrsmen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 28usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "Power interface clock enable during sleep mode bit"]
-            pub fn set_pwrsmen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val.0 as u32) & 0x01) << 28usize);
-            }
-            #[doc = "DAC interface clock enable during sleep mode bit"]
-            pub const fn dacsmen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 29usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "DAC interface clock enable during sleep mode bit"]
-            pub fn set_dacsmen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 29usize)) | (((val.0 as u32) & 0x01) << 29usize);
-            }
-            #[doc = "2C3 clock enable during Sleep mode bit"]
-            pub const fn i2c3smen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 30usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "2C3 clock enable during Sleep mode bit"]
-            pub fn set_i2c3smen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 30usize)) | (((val.0 as u32) & 0x01) << 30usize);
-            }
-            #[doc = "Low power timer clock enable during sleep mode bit"]
-            pub const fn lptim1smen(&self) -> super::vals::Lptimsmen {
-                let val = (self.0 >> 31usize) & 0x01;
-                super::vals::Lptimsmen(val as u8)
-            }
-            #[doc = "Low power timer clock enable during sleep mode bit"]
-            pub fn set_lptim1smen(&mut self, val: super::vals::Lptimsmen) {
-                self.0 = (self.0 & !(0x01 << 31usize)) | (((val.0 as u32) & 0x01) << 31usize);
-            }
-        }
-        impl Default for Apb1smenr {
-            fn default() -> Apb1smenr {
-                Apb1smenr(0)
-            }
-        }
-        #[doc = "AHB peripheral clock enable register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ahbenr(pub u32);
-        impl Ahbenr {
-            #[doc = "DMA clock enable bit"]
-            pub const fn dmaen(&self) -> super::vals::Crypen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Crypen(val as u8)
-            }
-            #[doc = "DMA clock enable bit"]
-            pub fn set_dmaen(&mut self, val: super::vals::Crypen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "NVM interface clock enable bit"]
-            pub const fn mifen(&self) -> super::vals::Crypen {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::Crypen(val as u8)
-            }
-            #[doc = "NVM interface clock enable bit"]
-            pub fn set_mifen(&mut self, val: super::vals::Crypen) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
-            }
-            #[doc = "CRC clock enable bit"]
-            pub const fn crcen(&self) -> super::vals::Crypen {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Crypen(val as u8)
-            }
-            #[doc = "CRC clock enable bit"]
-            pub fn set_crcen(&mut self, val: super::vals::Crypen) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "Touch Sensing clock enable bit"]
-            pub const fn touchen(&self) -> super::vals::Crypen {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Crypen(val as u8)
-            }
-            #[doc = "Touch Sensing clock enable bit"]
-            pub fn set_touchen(&mut self, val: super::vals::Crypen) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "Random Number Generator clock enable bit"]
-            pub const fn rngen(&self) -> super::vals::Crypen {
-                let val = (self.0 >> 20usize) & 0x01;
-                super::vals::Crypen(val as u8)
-            }
-            #[doc = "Random Number Generator clock enable bit"]
-            pub fn set_rngen(&mut self, val: super::vals::Crypen) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val.0 as u32) & 0x01) << 20usize);
-            }
-            #[doc = "Crypto clock enable bit"]
-            pub const fn crypen(&self) -> super::vals::Crypen {
-                let val = (self.0 >> 24usize) & 0x01;
-                super::vals::Crypen(val as u8)
-            }
-            #[doc = "Crypto clock enable bit"]
-            pub fn set_crypen(&mut self, val: super::vals::Crypen) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
-            }
-        }
-        impl Default for Ahbenr {
-            fn default() -> Ahbenr {
-                Ahbenr(0)
-            }
-        }
-        #[doc = "Clock interrupt clear register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cicr(pub u32);
-        impl Cicr {
-            #[doc = "LSI ready Interrupt clear"]
-            pub const fn lsirdyc(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LSI ready Interrupt clear"]
-            pub fn set_lsirdyc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "LSE ready Interrupt clear"]
-            pub const fn lserdyc(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LSE ready Interrupt clear"]
-            pub fn set_lserdyc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "HSI16 ready Interrupt clear"]
-            pub const fn hsi16rdyc(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "HSI16 ready Interrupt clear"]
-            pub fn set_hsi16rdyc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "HSE ready Interrupt clear"]
-            pub const fn hserdyc(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "HSE ready Interrupt clear"]
-            pub fn set_hserdyc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "PLL ready Interrupt clear"]
-            pub const fn pllrdyc(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "PLL ready Interrupt clear"]
-            pub fn set_pllrdyc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "MSI ready Interrupt clear"]
-            pub const fn msirdyc(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "MSI ready Interrupt clear"]
-            pub fn set_msirdyc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "HSI48 ready Interrupt clear"]
-            pub const fn hsi48rdyc(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "HSI48 ready Interrupt clear"]
-            pub fn set_hsi48rdyc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "LSE Clock Security System Interrupt clear"]
-            pub const fn csslsec(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LSE Clock Security System Interrupt clear"]
-            pub fn set_csslsec(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Clock Security System Interrupt clear"]
-            pub const fn csshsec(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Clock Security System Interrupt clear"]
-            pub fn set_csshsec(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-        }
-        impl Default for Cicr {
-            fn default() -> Cicr {
-                Cicr(0)
+            #[doc = "FMC memory mapping swap"]
+            pub fn set_swp_fmc(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 10usize)) | (((val as u32) & 0x03) << 10usize);
             }
         }
-        #[doc = "Clock interrupt flag register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cifr(pub u32);
-        impl Cifr {
-            #[doc = "LSI ready interrupt flag"]
-            pub const fn lsirdyf(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LSI ready interrupt flag"]
-            pub fn set_lsirdyf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "LSE ready interrupt flag"]
-            pub const fn lserdyf(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LSE ready interrupt flag"]
-            pub fn set_lserdyf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "HSI16 ready interrupt flag"]
-            pub const fn hsi16rdyf(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "HSI16 ready interrupt flag"]
-            pub fn set_hsi16rdyf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "HSE ready interrupt flag"]
-            pub const fn hserdyf(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "HSE ready interrupt flag"]
-            pub fn set_hserdyf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "PLL ready interrupt flag"]
-            pub const fn pllrdyf(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "PLL ready interrupt flag"]
-            pub fn set_pllrdyf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "MSI ready interrupt flag"]
-            pub const fn msirdyf(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "MSI ready interrupt flag"]
-            pub fn set_msirdyf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "HSI48 ready interrupt flag"]
-            pub const fn hsi48rdyf(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "HSI48 ready interrupt flag"]
-            pub fn set_hsi48rdyf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "LSE Clock Security System Interrupt flag"]
-            pub const fn csslsef(&self) -> super::vals::Csslsef {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Csslsef(val as u8)
-            }
-            #[doc = "LSE Clock Security System Interrupt flag"]
-            pub fn set_csslsef(&mut self, val: super::vals::Csslsef) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Clock Security System Interrupt flag"]
-            pub const fn csshsef(&self) -> super::vals::Csshsef {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::Csshsef(val as u8)
-            }
-            #[doc = "Clock Security System Interrupt flag"]
-            pub fn set_csshsef(&mut self, val: super::vals::Csshsef) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
-            }
-        }
-        impl Default for Cifr {
-            fn default() -> Cifr {
-                Cifr(0)
-            }
-        }
-        #[doc = "APB1 peripheral reset register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb1rstr(pub u32);
-        impl Apb1rstr {
-            #[doc = "Timer2 reset"]
-            pub const fn tim2rst(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Timer2 reset"]
-            pub fn set_tim2rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Timer3 reset"]
-            pub const fn tim3rst(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Timer3 reset"]
-            pub fn set_tim3rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Timer 6 reset"]
-            pub const fn tim6rst(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Timer 6 reset"]
-            pub fn set_tim6rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Timer 7 reset"]
-            pub const fn tim7rst(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Timer 7 reset"]
-            pub fn set_tim7rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Window watchdog reset"]
-            pub const fn wwdrst(&self) -> bool {
-                let val = (self.0 >> 11usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Window watchdog reset"]
-            pub fn set_wwdrst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
-            }
-            #[doc = "SPI2 reset"]
-            pub const fn spi2rst(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SPI2 reset"]
-            pub fn set_spi2rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
-            }
-            #[doc = "UART2 reset"]
-            pub const fn lpuart12rst(&self) -> bool {
-                let val = (self.0 >> 17usize) & 0x01;
-                val != 0
-            }
-            #[doc = "UART2 reset"]
-            pub fn set_lpuart12rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
-            }
-            #[doc = "LPUART1 reset"]
-            pub const fn lpuart1rst(&self) -> bool {
-                let val = (self.0 >> 18usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LPUART1 reset"]
-            pub fn set_lpuart1rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize);
-            }
-            #[doc = "USART4 reset"]
-            pub const fn usart4rst(&self) -> bool {
-                let val = (self.0 >> 19usize) & 0x01;
-                val != 0
-            }
-            #[doc = "USART4 reset"]
-            pub fn set_usart4rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize);
-            }
-            #[doc = "USART5 reset"]
-            pub const fn usart5rst(&self) -> bool {
-                let val = (self.0 >> 20usize) & 0x01;
-                val != 0
-            }
-            #[doc = "USART5 reset"]
-            pub fn set_usart5rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
-            }
-            #[doc = "I2C1 reset"]
-            pub const fn i2c1rst(&self) -> bool {
-                let val = (self.0 >> 21usize) & 0x01;
-                val != 0
-            }
-            #[doc = "I2C1 reset"]
-            pub fn set_i2c1rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
-            }
-            #[doc = "I2C2 reset"]
-            pub const fn i2c2rst(&self) -> bool {
-                let val = (self.0 >> 22usize) & 0x01;
-                val != 0
-            }
-            #[doc = "I2C2 reset"]
-            pub fn set_i2c2rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
-            }
-            #[doc = "USB reset"]
-            pub const fn usbrst(&self) -> bool {
-                let val = (self.0 >> 23usize) & 0x01;
-                val != 0
-            }
-            #[doc = "USB reset"]
-            pub fn set_usbrst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
-            }
-            #[doc = "Clock recovery system reset"]
-            pub const fn crsrst(&self) -> bool {
-                let val = (self.0 >> 27usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Clock recovery system reset"]
-            pub fn set_crsrst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize);
-            }
-            #[doc = "Power interface reset"]
-            pub const fn pwrrst(&self) -> bool {
-                let val = (self.0 >> 28usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Power interface reset"]
-            pub fn set_pwrrst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize);
-            }
-            #[doc = "DAC interface reset"]
-            pub const fn dacrst(&self) -> bool {
-                let val = (self.0 >> 29usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DAC interface reset"]
-            pub fn set_dacrst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize);
-            }
-            #[doc = "I2C3 reset"]
-            pub const fn i2c3rst(&self) -> bool {
-                let val = (self.0 >> 30usize) & 0x01;
-                val != 0
-            }
-            #[doc = "I2C3 reset"]
-            pub fn set_i2c3rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize);
-            }
-            #[doc = "Low power timer reset"]
-            pub const fn lptim1rst(&self) -> bool {
-                let val = (self.0 >> 31usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Low power timer reset"]
-            pub fn set_lptim1rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
-            }
-        }
-        impl Default for Apb1rstr {
-            fn default() -> Apb1rstr {
-                Apb1rstr(0)
-            }
-        }
-        #[doc = "Clock configuration register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cfgr(pub u32);
-        impl Cfgr {
-            #[doc = "System clock switch"]
-            pub const fn sw(&self) -> super::vals::Sw {
-                let val = (self.0 >> 0usize) & 0x03;
-                super::vals::Sw(val as u8)
-            }
-            #[doc = "System clock switch"]
-            pub fn set_sw(&mut self, val: super::vals::Sw) {
-                self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize);
-            }
-            #[doc = "System clock switch status"]
-            pub const fn sws(&self) -> super::vals::Sws {
-                let val = (self.0 >> 2usize) & 0x03;
-                super::vals::Sws(val as u8)
-            }
-            #[doc = "System clock switch status"]
-            pub fn set_sws(&mut self, val: super::vals::Sws) {
-                self.0 = (self.0 & !(0x03 << 2usize)) | (((val.0 as u32) & 0x03) << 2usize);
-            }
-            #[doc = "AHB prescaler"]
-            pub const fn hpre(&self) -> super::vals::Hpre {
-                let val = (self.0 >> 4usize) & 0x0f;
-                super::vals::Hpre(val as u8)
-            }
-            #[doc = "AHB prescaler"]
-            pub fn set_hpre(&mut self, val: super::vals::Hpre) {
-                self.0 = (self.0 & !(0x0f << 4usize)) | (((val.0 as u32) & 0x0f) << 4usize);
-            }
-            #[doc = "APB low-speed prescaler (APB1)"]
-            pub fn ppre(&self, n: usize) -> super::vals::Ppre {
-                assert!(n < 2usize);
-                let offs = 8usize + n * 3usize;
-                let val = (self.0 >> offs) & 0x07;
-                super::vals::Ppre(val as u8)
-            }
-            #[doc = "APB low-speed prescaler (APB1)"]
-            pub fn set_ppre(&mut self, n: usize, val: super::vals::Ppre) {
-                assert!(n < 2usize);
-                let offs = 8usize + n * 3usize;
-                self.0 = (self.0 & !(0x07 << offs)) | (((val.0 as u32) & 0x07) << offs);
-            }
-            #[doc = "Wake-up from stop clock selection"]
-            pub const fn stopwuck(&self) -> super::vals::Stopwuck {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Stopwuck(val as u8)
-            }
-            #[doc = "Wake-up from stop clock selection"]
-            pub fn set_stopwuck(&mut self, val: super::vals::Stopwuck) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+        impl Default for Memrm {
+            fn default() -> Memrm {
+                Memrm(0)
             }
-            #[doc = "PLL entry clock source"]
-            pub const fn pllsrc(&self) -> super::vals::Pllsrc {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Pllsrc(val as u8)
-            }
-            #[doc = "PLL entry clock source"]
-            pub fn set_pllsrc(&mut self, val: super::vals::Pllsrc) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "PLL multiplication factor"]
-            pub const fn pllmul(&self) -> super::vals::Pllmul {
-                let val = (self.0 >> 18usize) & 0x0f;
-                super::vals::Pllmul(val as u8)
-            }
-            #[doc = "PLL multiplication factor"]
-            pub fn set_pllmul(&mut self, val: super::vals::Pllmul) {
-                self.0 = (self.0 & !(0x0f << 18usize)) | (((val.0 as u32) & 0x0f) << 18usize);
-            }
-            #[doc = "PLL output division"]
-            pub const fn plldiv(&self) -> super::vals::Plldiv {
-                let val = (self.0 >> 22usize) & 0x03;
-                super::vals::Plldiv(val as u8)
-            }
-            #[doc = "PLL output division"]
-            pub fn set_plldiv(&mut self, val: super::vals::Plldiv) {
-                self.0 = (self.0 & !(0x03 << 22usize)) | (((val.0 as u32) & 0x03) << 22usize);
-            }
-            #[doc = "Microcontroller clock output selection"]
-            pub const fn mcosel(&self) -> super::vals::Mcosel {
-                let val = (self.0 >> 24usize) & 0x0f;
-                super::vals::Mcosel(val as u8)
-            }
-            #[doc = "Microcontroller clock output selection"]
-            pub fn set_mcosel(&mut self, val: super::vals::Mcosel) {
-                self.0 = (self.0 & !(0x0f << 24usize)) | (((val.0 as u32) & 0x0f) << 24usize);
-            }
-            #[doc = "Microcontroller clock output prescaler"]
-            pub const fn mcopre(&self) -> super::vals::Mcopre {
-                let val = (self.0 >> 28usize) & 0x07;
-                super::vals::Mcopre(val as u8)
-            }
-            #[doc = "Microcontroller clock output prescaler"]
-            pub fn set_mcopre(&mut self, val: super::vals::Mcopre) {
-                self.0 = (self.0 & !(0x07 << 28usize)) | (((val.0 as u32) & 0x07) << 28usize);
-            }
-        }
-        impl Default for Cfgr {
-            fn default() -> Cfgr {
-                Cfgr(0)
-            }
-        }
-        #[doc = "APB2 peripheral reset register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb2rstr(pub u32);
-        impl Apb2rstr {
-            #[doc = "System configuration controller reset"]
-            pub const fn syscfgrst(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "System configuration controller reset"]
-            pub fn set_syscfgrst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "TIM21 timer reset"]
-            pub const fn tim21rst(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "TIM21 timer reset"]
-            pub fn set_tim21rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "TIM22 timer reset"]
-            pub const fn tim22rst(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "TIM22 timer reset"]
-            pub fn set_tim22rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "ADC interface reset"]
-            pub const fn adcrst(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "ADC interface reset"]
-            pub fn set_adcrst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "SPI 1 reset"]
-            pub const fn spi1rst(&self) -> bool {
-                let val = (self.0 >> 12usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SPI 1 reset"]
-            pub fn set_spi1rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
-            }
-            #[doc = "USART1 reset"]
-            pub const fn usart1rst(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
-                val != 0
-            }
-            #[doc = "USART1 reset"]
-            pub fn set_usart1rst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
-            }
-            #[doc = "DBG reset"]
-            pub const fn dbgrst(&self) -> bool {
-                let val = (self.0 >> 22usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DBG reset"]
-            pub fn set_dbgrst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
-            }
-        }
-        impl Default for Apb2rstr {
-            fn default() -> Apb2rstr {
-                Apb2rstr(0)
-            }
-        }
-        #[doc = "APB2 peripheral clock enable register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Apb2enr(pub u32);
-        impl Apb2enr {
-            #[doc = "System configuration controller clock enable bit"]
-            pub const fn syscfgen(&self) -> super::vals::Dbgen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Dbgen(val as u8)
-            }
-            #[doc = "System configuration controller clock enable bit"]
-            pub fn set_syscfgen(&mut self, val: super::vals::Dbgen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "TIM21 timer clock enable bit"]
-            pub const fn tim21en(&self) -> super::vals::Dbgen {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Dbgen(val as u8)
-            }
-            #[doc = "TIM21 timer clock enable bit"]
-            pub fn set_tim21en(&mut self, val: super::vals::Dbgen) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "TIM22 timer clock enable bit"]
-            pub const fn tim22en(&self) -> super::vals::Dbgen {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Dbgen(val as u8)
-            }
-            #[doc = "TIM22 timer clock enable bit"]
-            pub fn set_tim22en(&mut self, val: super::vals::Dbgen) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "MiFaRe Firewall clock enable bit"]
-            pub const fn mifien(&self) -> super::vals::Dbgen {
-                let val = (self.0 >> 7usize) & 0x01;
-                super::vals::Dbgen(val as u8)
-            }
-            #[doc = "MiFaRe Firewall clock enable bit"]
-            pub fn set_mifien(&mut self, val: super::vals::Dbgen) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
-            }
-            #[doc = "ADC clock enable bit"]
-            pub const fn adcen(&self) -> super::vals::Dbgen {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Dbgen(val as u8)
-            }
-            #[doc = "ADC clock enable bit"]
-            pub fn set_adcen(&mut self, val: super::vals::Dbgen) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "SPI1 clock enable bit"]
-            pub const fn spi1en(&self) -> super::vals::Dbgen {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Dbgen(val as u8)
-            }
-            #[doc = "SPI1 clock enable bit"]
-            pub fn set_spi1en(&mut self, val: super::vals::Dbgen) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "USART1 clock enable bit"]
-            pub const fn usart1en(&self) -> super::vals::Dbgen {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Dbgen(val as u8)
-            }
-            #[doc = "USART1 clock enable bit"]
-            pub fn set_usart1en(&mut self, val: super::vals::Dbgen) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "DBG clock enable bit"]
-            pub const fn dbgen(&self) -> super::vals::Dbgen {
-                let val = (self.0 >> 22usize) & 0x01;
-                super::vals::Dbgen(val as u8)
-            }
-            #[doc = "DBG clock enable bit"]
-            pub fn set_dbgen(&mut self, val: super::vals::Dbgen) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val.0 as u32) & 0x01) << 22usize);
-            }
-        }
-        impl Default for Apb2enr {
-            fn default() -> Apb2enr {
-                Apb2enr(0)
-            }
-        }
-        #[doc = "AHB peripheral clock enable in sleep mode register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ahbsmenr(pub u32);
-        impl Ahbsmenr {
-            #[doc = "DMA clock enable during sleep mode bit"]
-            pub const fn dmasmen(&self) -> super::vals::Dmasmen {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Dmasmen(val as u8)
-            }
-            #[doc = "DMA clock enable during sleep mode bit"]
-            pub fn set_dmasmen(&mut self, val: super::vals::Dmasmen) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "NVM interface clock enable during sleep mode bit"]
-            pub const fn mifsmen(&self) -> super::vals::Mifsmen {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::Mifsmen(val as u8)
-            }
-            #[doc = "NVM interface clock enable during sleep mode bit"]
-            pub fn set_mifsmen(&mut self, val: super::vals::Mifsmen) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
-            }
-            #[doc = "SRAM interface clock enable during sleep mode bit"]
-            pub const fn sramsmen(&self) -> super::vals::Sramsmen {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Sramsmen(val as u8)
-            }
-            #[doc = "SRAM interface clock enable during sleep mode bit"]
-            pub fn set_sramsmen(&mut self, val: super::vals::Sramsmen) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "CRC clock enable during sleep mode bit"]
-            pub const fn crcsmen(&self) -> super::vals::Crcsmen {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Crcsmen(val as u8)
-            }
-            #[doc = "CRC clock enable during sleep mode bit"]
-            pub fn set_crcsmen(&mut self, val: super::vals::Crcsmen) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "Touch Sensing clock enable during sleep mode bit"]
-            pub const fn touchsmen(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Touch Sensing clock enable during sleep mode bit"]
-            pub fn set_touchsmen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
-            #[doc = "Random Number Generator clock enable during sleep mode bit"]
-            pub const fn rngsmen(&self) -> bool {
-                let val = (self.0 >> 20usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Random Number Generator clock enable during sleep mode bit"]
-            pub fn set_rngsmen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
-            }
-            #[doc = "Crypto clock enable during sleep mode bit"]
-            pub const fn crypsmen(&self) -> super::vals::Crypsmen {
-                let val = (self.0 >> 24usize) & 0x01;
-                super::vals::Crypsmen(val as u8)
-            }
-            #[doc = "Crypto clock enable during sleep mode bit"]
-            pub fn set_crypsmen(&mut self, val: super::vals::Crypsmen) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
-            }
-        }
-        impl Default for Ahbsmenr {
-            fn default() -> Ahbsmenr {
-                Ahbsmenr(0)
-            }
-        }
-        #[doc = "Clock control register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr(pub u32);
-        impl Cr {
-            #[doc = "16 MHz high-speed internal clock enable"]
-            pub const fn hsi16on(&self) -> super::vals::Pllon {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Pllon(val as u8)
-            }
-            #[doc = "16 MHz high-speed internal clock enable"]
-            pub fn set_hsi16on(&mut self, val: super::vals::Pllon) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "High-speed internal clock enable bit for some IP kernels"]
-            pub const fn hsi16keron(&self) -> super::vals::Pllon {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Pllon(val as u8)
-            }
-            #[doc = "High-speed internal clock enable bit for some IP kernels"]
-            pub fn set_hsi16keron(&mut self, val: super::vals::Pllon) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Internal high-speed clock ready flag"]
-            pub const fn hsi16rdyf(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Internal high-speed clock ready flag"]
-            pub fn set_hsi16rdyf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "HSI16DIVEN"]
-            pub const fn hsi16diven(&self) -> super::vals::Hsidiven {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Hsidiven(val as u8)
-            }
-            #[doc = "HSI16DIVEN"]
-            pub fn set_hsi16diven(&mut self, val: super::vals::Hsidiven) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "HSI16DIVF"]
-            pub const fn hsi16divf(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "HSI16DIVF"]
-            pub fn set_hsi16divf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "16 MHz high-speed internal clock output enable"]
-            pub const fn hsi16outen(&self) -> super::vals::Hsiouten {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Hsiouten(val as u8)
-            }
-            #[doc = "16 MHz high-speed internal clock output enable"]
-            pub fn set_hsi16outen(&mut self, val: super::vals::Hsiouten) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "MSI clock enable bit"]
-            pub const fn msion(&self) -> super::vals::Pllon {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::Pllon(val as u8)
-            }
-            #[doc = "MSI clock enable bit"]
-            pub fn set_msion(&mut self, val: super::vals::Pllon) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
-            }
-            #[doc = "MSI clock ready flag"]
-            pub const fn msirdy(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "MSI clock ready flag"]
-            pub fn set_msirdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "HSE clock enable bit"]
-            pub const fn hseon(&self) -> super::vals::Pllon {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Pllon(val as u8)
-            }
-            #[doc = "HSE clock enable bit"]
-            pub fn set_hseon(&mut self, val: super::vals::Pllon) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "HSE clock ready flag"]
-            pub const fn hserdy(&self) -> bool {
-                let val = (self.0 >> 17usize) & 0x01;
-                val != 0
-            }
-            #[doc = "HSE clock ready flag"]
-            pub fn set_hserdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
-            }
-            #[doc = "HSE clock bypass bit"]
-            pub const fn hsebyp(&self) -> super::vals::Hsebyp {
-                let val = (self.0 >> 18usize) & 0x01;
-                super::vals::Hsebyp(val as u8)
-            }
-            #[doc = "HSE clock bypass bit"]
-            pub fn set_hsebyp(&mut self, val: super::vals::Hsebyp) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
-            }
-            #[doc = "Clock security system on HSE enable bit"]
-            pub const fn csshseon(&self) -> super::vals::Pllon {
-                let val = (self.0 >> 19usize) & 0x01;
-                super::vals::Pllon(val as u8)
-            }
-            #[doc = "Clock security system on HSE enable bit"]
-            pub fn set_csshseon(&mut self, val: super::vals::Pllon) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
-            }
-            #[doc = "TC/LCD prescaler"]
-            pub const fn rtcpre(&self) -> super::vals::Rtcpre {
-                let val = (self.0 >> 20usize) & 0x03;
-                super::vals::Rtcpre(val as u8)
-            }
-            #[doc = "TC/LCD prescaler"]
-            pub fn set_rtcpre(&mut self, val: super::vals::Rtcpre) {
-                self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize);
-            }
-            #[doc = "PLL enable bit"]
-            pub const fn pllon(&self) -> super::vals::Pllon {
-                let val = (self.0 >> 24usize) & 0x01;
-                super::vals::Pllon(val as u8)
-            }
-            #[doc = "PLL enable bit"]
-            pub fn set_pllon(&mut self, val: super::vals::Pllon) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
-            }
-            #[doc = "PLL clock ready flag"]
-            pub const fn pllrdy(&self) -> bool {
-                let val = (self.0 >> 25usize) & 0x01;
-                val != 0
-            }
-            #[doc = "PLL clock ready flag"]
-            pub fn set_pllrdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize);
-            }
-        }
-        impl Default for Cr {
-            fn default() -> Cr {
-                Cr(0)
-            }
-        }
-    }
-    pub mod vals {
-        use crate::generic::*;
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lserdy(pub u8);
-        impl Lserdy {
-            #[doc = "Oscillator not ready"]
-            pub const NOTREADY: Self = Self(0);
-            #[doc = "Oscillator ready"]
-            pub const READY: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Csslsed(pub u8);
-        impl Csslsed {
-            #[doc = "No failure detected on LSE (32 kHz oscillator)"]
-            pub const NOFAILURE: Self = Self(0);
-            #[doc = "Failure detected on LSE (32 kHz oscillator)"]
-            pub const FAILURE: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hserdyr(pub u8);
-        impl Hserdyr {
-            #[doc = "Oscillator is not stable"]
-            pub const NOTREADY: Self = Self(0);
-            #[doc = "Oscillator is stable"]
-            pub const READY: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Csshsef(pub u8);
-        impl Csshsef {
-            #[doc = "No clock security interrupt caused by HSE clock failure"]
-            pub const NOCLOCK: Self = Self(0);
-            #[doc = "Clock security interrupt caused by HSE clock failure"]
-            pub const CLOCK: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Csslseon(pub u8);
-        impl Csslseon {
-            #[doc = "Oscillator OFF"]
-            pub const OFF: Self = Self(0);
-            #[doc = "Oscillator ON"]
-            pub const ON: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Mcosel(pub u8);
-        impl Mcosel {
-            #[doc = "No clock"]
-            pub const NOCLOCK: Self = Self(0);
-            #[doc = "SYSCLK clock selected"]
-            pub const SYSCLK: Self = Self(0x01);
-            #[doc = "HSI oscillator clock selected"]
-            pub const HSI16: Self = Self(0x02);
-            #[doc = "MSI oscillator clock selected"]
-            pub const MSI: Self = Self(0x03);
-            #[doc = "HSE oscillator clock selected"]
-            pub const HSE: Self = Self(0x04);
-            #[doc = "PLL clock selected"]
-            pub const PLL: Self = Self(0x05);
-            #[doc = "LSI oscillator clock selected"]
-            pub const LSI: Self = Self(0x06);
-            #[doc = "LSE oscillator clock selected"]
-            pub const LSE: Self = Self(0x07);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hsiouten(pub u8);
-        impl Hsiouten {
-            #[doc = "HSI output clock disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "HSI output clock enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lptimen(pub u8);
-        impl Lptimen {
-            #[doc = "Clock disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Clock enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hsidivfr(pub u8);
-        impl Hsidivfr {
-            #[doc = "16 MHz HSI clock not divided"]
-            pub const NOTDIVIDED: Self = Self(0);
-            #[doc = "16 MHz HSI clock divided by 4"]
-            pub const DIV4: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Csslsef(pub u8);
-        impl Csslsef {
-            #[doc = "No failure detected on LSE clock failure"]
-            pub const NOFAILURE: Self = Self(0);
-            #[doc = "Failure detected on LSE clock failure"]
-            pub const FAILURE: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lptimsel(pub u8);
-        impl Lptimsel {
-            #[doc = "APB clock selected as Timer clock"]
-            pub const APB: Self = Self(0);
-            #[doc = "LSI clock selected as Timer clock"]
-            pub const LSI: Self = Self(0x01);
-            #[doc = "HSI16 clock selected as Timer clock"]
-            pub const HSI16: Self = Self(0x02);
-            #[doc = "LSE clock selected as Timer clock"]
-            pub const LSE: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Rtcen(pub u8);
-        impl Rtcen {
-            #[doc = "RTC clock disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "RTC clock enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Iophrst(pub u8);
-        impl Iophrst {
-            #[doc = "Reset I/O port"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hsirdyie(pub u8);
-        impl Hsirdyie {
-            #[doc = "Ready interrupt disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Ready interrupt enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Iophen(pub u8);
-        impl Iophen {
-            #[doc = "Port clock disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Port clock enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Csslse(pub u8);
-        impl Csslse {
-            #[doc = "LSE CSS interrupt disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "LSE CSS interrupt enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Rtcrstw(pub u8);
-        impl Rtcrstw {
-            #[doc = "Resets the RTC peripheral"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Mifsmen(pub u8);
-        impl Mifsmen {
-            #[doc = "NVM interface clock disabled in Sleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "NVM interface clock enabled in Sleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Dmasmen(pub u8);
-        impl Dmasmen {
-            #[doc = "DMA clock disabled in Sleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "DMA clock enabled in Sleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ppre(pub u8);
-        impl Ppre {
-            #[doc = "HCLK not divided"]
-            pub const DIV1: Self = Self(0);
-            #[doc = "HCLK divided by 2"]
-            pub const DIV2: Self = Self(0x04);
-            #[doc = "HCLK divided by 4"]
-            pub const DIV4: Self = Self(0x05);
-            #[doc = "HCLK divided by 8"]
-            pub const DIV8: Self = Self(0x06);
-            #[doc = "HCLK divided by 16"]
-            pub const DIV16: Self = Self(0x07);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lsedrv(pub u8);
-        impl Lsedrv {
-            #[doc = "Lowest drive"]
-            pub const LOW: Self = Self(0);
-            #[doc = "Medium low drive"]
-            pub const MEDIUMLOW: Self = Self(0x01);
-            #[doc = "Medium high drive"]
-            pub const MEDIUMHIGH: Self = Self(0x02);
-            #[doc = "Highest drive"]
-            pub const HIGH: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hpre(pub u8);
-        impl Hpre {
-            #[doc = "system clock not divided"]
-            pub const DIV1: Self = Self(0);
-            #[doc = "system clock divided by 2"]
-            pub const DIV2: Self = Self(0x08);
-            #[doc = "system clock divided by 4"]
-            pub const DIV4: Self = Self(0x09);
-            #[doc = "system clock divided by 8"]
-            pub const DIV8: Self = Self(0x0a);
-            #[doc = "system clock divided by 16"]
-            pub const DIV16: Self = Self(0x0b);
-            #[doc = "system clock divided by 64"]
-            pub const DIV64: Self = Self(0x0c);
-            #[doc = "system clock divided by 128"]
-            pub const DIV128: Self = Self(0x0d);
-            #[doc = "system clock divided by 256"]
-            pub const DIV256: Self = Self(0x0e);
-            #[doc = "system clock divided by 512"]
-            pub const DIV512: Self = Self(0x0f);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hsi16rdyfr(pub u8);
-        impl Hsi16rdyfr {
-            #[doc = "HSI 16 MHz oscillator not ready"]
-            pub const NOTREADY: Self = Self(0);
-            #[doc = "HSI 16 MHz oscillator ready"]
-            pub const READY: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lsebyp(pub u8);
-        impl Lsebyp {
-            #[doc = "LSE oscillator not bypassed"]
-            pub const NOTBYPASSED: Self = Self(0);
-            #[doc = "LSE oscillator bypassed"]
-            pub const BYPASSED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Dbgsmen(pub u8);
-        impl Dbgsmen {
-            #[doc = "Clock disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Clock enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Msirange(pub u8);
-        impl Msirange {
-            #[doc = "range 0 around 65.536 kHz"]
-            pub const RANGE0: Self = Self(0);
-            #[doc = "range 1 around 131.072 kHz"]
-            pub const RANGE1: Self = Self(0x01);
-            #[doc = "range 2 around 262.144 kHz"]
-            pub const RANGE2: Self = Self(0x02);
-            #[doc = "range 3 around 524.288 kHz"]
-            pub const RANGE3: Self = Self(0x03);
-            #[doc = "range 4 around 1.048 MHz"]
-            pub const RANGE4: Self = Self(0x04);
-            #[doc = "range 5 around 2.097 MHz (reset value)"]
-            pub const RANGE5: Self = Self(0x05);
-            #[doc = "range 6 around 4.194 MHz"]
-            pub const RANGE6: Self = Self(0x06);
-            #[doc = "not allowed"]
-            pub const RANGE7: Self = Self(0x07);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Csshsecw(pub u8);
-        impl Csshsecw {
-            #[doc = "Clear interrupt flag"]
-            pub const CLEAR: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hsidiven(pub u8);
-        impl Hsidiven {
-            #[doc = "no 16 MHz HSI division requested"]
-            pub const NOTDIVIDED: Self = Self(0);
-            #[doc = "16 MHz HSI division by 4 requested"]
-            pub const DIV4: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Cryprstw(pub u8);
-        impl Cryprstw {
-            #[doc = "Reset the module"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Sw(pub u8);
-        impl Sw {
-            #[doc = "MSI oscillator used as system clock"]
-            pub const MSI: Self = Self(0);
-            #[doc = "HSI oscillator used as system clock"]
-            pub const HSI16: Self = Self(0x01);
-            #[doc = "HSE oscillator used as system clock"]
-            pub const HSE: Self = Self(0x02);
-            #[doc = "PLL used as system clock"]
-            pub const PLL: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Crypen(pub u8);
-        impl Crypen {
-            #[doc = "Clock disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Clock enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Dbgrstw(pub u8);
-        impl Dbgrstw {
-            #[doc = "Reset the module"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lpuartsel(pub u8);
-        impl Lpuartsel {
-            #[doc = "APB clock selected as peripheral clock"]
-            pub const APB: Self = Self(0);
-            #[doc = "System clock selected as peripheral clock"]
-            pub const SYSTEM: Self = Self(0x01);
-            #[doc = "HSI16 clock selected as peripheral clock"]
-            pub const HSI16: Self = Self(0x02);
-            #[doc = "LSE clock selected as peripheral clock"]
-            pub const LSE: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Plldiv(pub u8);
-        impl Plldiv {
-            #[doc = "PLLVCO / 2"]
-            pub const DIV2: Self = Self(0x01);
-            #[doc = "PLLVCO / 3"]
-            pub const DIV3: Self = Self(0x02);
-            #[doc = "PLLVCO / 4"]
-            pub const DIV4: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hsi48rdyfr(pub u8);
-        impl Hsi48rdyfr {
-            #[doc = "No clock ready interrupt"]
-            pub const NOTINTERRUPTED: Self = Self(0);
-            #[doc = "Clock ready interrupt"]
-            pub const INTERRUPTED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Sramsmen(pub u8);
-        impl Sramsmen {
-            #[doc = "NVM interface clock disabled in Sleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "NVM interface clock enabled in Sleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Iophsmen(pub u8);
-        impl Iophsmen {
-            #[doc = "Port x clock is disabled in Sleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Port x clock is enabled in Sleep mode (if enabled by IOPHEN)"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Icsel(pub u8);
-        impl Icsel {
-            #[doc = "APB clock selected as peripheral clock"]
-            pub const APB: Self = Self(0);
-            #[doc = "System clock selected as peripheral clock"]
-            pub const SYSTEM: Self = Self(0x01);
-            #[doc = "HSI16 clock selected as peripheral clock"]
-            pub const HSI16: Self = Self(0x02);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Rtcsel(pub u8);
-        impl Rtcsel {
-            #[doc = "No clock"]
-            pub const NOCLOCK: Self = Self(0);
-            #[doc = "LSE oscillator clock used as RTC clock"]
-            pub const LSE: Self = Self(0x01);
-            #[doc = "LSI oscillator clock used as RTC clock"]
-            pub const LSI: Self = Self(0x02);
-            #[doc = "HSE oscillator clock divided by a programmable prescaler (selection through the RTCPRE[1:0]
-bits in the RCC clock control register (RCC_CR)) used as the RTC clock"]
-            pub const HSE: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Pllsrc(pub u8);
-        impl Pllsrc {
-            #[doc = "HSI selected as PLL input clock"]
-            pub const HSI16: Self = Self(0);
-            #[doc = "HSE selected as PLL input clock"]
-            pub const HSE: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Pllon(pub u8);
-        impl Pllon {
-            #[doc = "Clock disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Clock enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hsebyp(pub u8);
-        impl Hsebyp {
-            #[doc = "HSE oscillator not bypassed"]
-            pub const NOTBYPASSED: Self = Self(0);
-            #[doc = "HSE oscillator bypassed"]
-            pub const BYPASSED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Pllmul(pub u8);
-        impl Pllmul {
-            #[doc = "PLL clock entry x 3"]
-            pub const MUL3: Self = Self(0);
-            #[doc = "PLL clock entry x 4"]
-            pub const MUL4: Self = Self(0x01);
-            #[doc = "PLL clock entry x 6"]
-            pub const MUL6: Self = Self(0x02);
-            #[doc = "PLL clock entry x 8"]
-            pub const MUL8: Self = Self(0x03);
-            #[doc = "PLL clock entry x 12"]
-            pub const MUL12: Self = Self(0x04);
-            #[doc = "PLL clock entry x 16"]
-            pub const MUL16: Self = Self(0x05);
-            #[doc = "PLL clock entry x 24"]
-            pub const MUL24: Self = Self(0x06);
-            #[doc = "PLL clock entry x 32"]
-            pub const MUL32: Self = Self(0x07);
-            #[doc = "PLL clock entry x 48"]
-            pub const MUL48: Self = Self(0x08);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Rtcpre(pub u8);
-        impl Rtcpre {
-            #[doc = "HSE divided by 2"]
-            pub const DIV2: Self = Self(0);
-            #[doc = "HSE divided by 4"]
-            pub const DIV4: Self = Self(0x01);
-            #[doc = "HSE divided by 8"]
-            pub const DIV8: Self = Self(0x02);
-            #[doc = "HSE divided by 16"]
-            pub const DIV16: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lptimsmen(pub u8);
-        impl Lptimsmen {
-            #[doc = "Clock disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Clock enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lptimrstw(pub u8);
-        impl Lptimrstw {
-            #[doc = "Reset the module"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Pllrdyr(pub u8);
-        impl Pllrdyr {
-            #[doc = "PLL unlocked"]
-            pub const UNLOCKED: Self = Self(0);
-            #[doc = "PLL locked"]
-            pub const LOCKED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lpwrrstfr(pub u8);
-        impl Lpwrrstfr {
-            #[doc = "No reset has occured"]
-            pub const NORESET: Self = Self(0);
-            #[doc = "A reset has occured"]
-            pub const RESET: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Dbgen(pub u8);
-        impl Dbgen {
-            #[doc = "Clock disabled"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Clock enabled"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Rmvfw(pub u8);
-        impl Rmvfw {
-            #[doc = "Clears the reset flag"]
-            pub const CLEAR: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Sws(pub u8);
-        impl Sws {
-            #[doc = "MSI oscillator used as system clock"]
-            pub const MSI: Self = Self(0);
-            #[doc = "HSI oscillator used as system clock"]
-            pub const HSI16: Self = Self(0x01);
-            #[doc = "HSE oscillator used as system clock"]
-            pub const HSE: Self = Self(0x02);
-            #[doc = "PLL used as system clock"]
-            pub const PLL: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Mcopre(pub u8);
-        impl Mcopre {
-            #[doc = "No division"]
-            pub const DIV1: Self = Self(0);
-            #[doc = "Division by 2"]
-            pub const DIV2: Self = Self(0x01);
-            #[doc = "Division by 4"]
-            pub const DIV4: Self = Self(0x02);
-            #[doc = "Division by 8"]
-            pub const DIV8: Self = Self(0x03);
-            #[doc = "Division by 16"]
-            pub const DIV16: Self = Self(0x04);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Crypsmen(pub u8);
-        impl Crypsmen {
-            #[doc = "Crypto clock disabled in Sleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Crypto clock enabled in Sleep mode"]
-            pub const ENABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Stopwuck(pub u8);
-        impl Stopwuck {
-            #[doc = "Internal 64 KHz to 4 MHz (MSI) oscillator selected as wake-up from Stop clock"]
-            pub const MSI: Self = Self(0);
-            #[doc = "Internal 16 MHz (HSI) oscillator selected as wake-up from Stop clock (or HSI16/4 if HSI16DIVEN=1)"]
-            pub const HSI16: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Crcsmen(pub u8);
-        impl Crcsmen {
-            #[doc = "Test integration module clock disabled in Sleep mode"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Test integration module clock enabled in Sleep mode (if enabled by CRCEN)"]
-            pub const ENABLED: Self = Self(0x01);
         }
     }
 }
-pub mod usart_v2 {
+pub mod syscfg_l4 {
     use crate::generic::*;
-    #[doc = "Universal synchronous asynchronous receiver transmitter"]
+    #[doc = "System configuration controller"]
     #[derive(Copy, Clone)]
-    pub struct Usart(pub *mut u8);
-    unsafe impl Send for Usart {}
-    unsafe impl Sync for Usart {}
-    impl Usart {
-        #[doc = "Control register 1"]
-        pub fn cr1(self) -> Reg<regs::Cr1, RW> {
+    pub struct Syscfg(pub *mut u8);
+    unsafe impl Send for Syscfg {}
+    unsafe impl Sync for Syscfg {}
+    impl Syscfg {
+        #[doc = "memory remap register"]
+        pub fn memrmp(self) -> Reg<regs::Memrmp, RW> {
             unsafe { Reg::from_ptr(self.0.add(0usize)) }
         }
-        #[doc = "Control register 2"]
-        pub fn cr2(self) -> Reg<regs::Cr2, RW> {
+        #[doc = "configuration register 1"]
+        pub fn cfgr1(self) -> Reg<regs::Cfgr1, RW> {
             unsafe { Reg::from_ptr(self.0.add(4usize)) }
         }
-        #[doc = "Control register 3"]
-        pub fn cr3(self) -> Reg<regs::Cr3, RW> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        #[doc = "external interrupt configuration register 1"]
+        pub fn exticr(self, n: usize) -> Reg<regs::Exticr, RW> {
+            assert!(n < 4usize);
+            unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) }
         }
-        #[doc = "Baud rate register"]
-        pub fn brr(self) -> Reg<regs::Brr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(12usize)) }
-        }
-        #[doc = "Guard time and prescaler register"]
-        pub fn gtpr(self) -> Reg<regs::Gtpr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(16usize)) }
-        }
-        #[doc = "Receiver timeout register"]
-        pub fn rtor(self) -> Reg<regs::Rtor, RW> {
-            unsafe { Reg::from_ptr(self.0.add(20usize)) }
-        }
-        #[doc = "Request register"]
-        pub fn rqr(self) -> Reg<regs::Rqr, W> {
+        #[doc = "SCSR"]
+        pub fn scsr(self) -> Reg<regs::Scsr, RW> {
             unsafe { Reg::from_ptr(self.0.add(24usize)) }
         }
-        #[doc = "Interrupt & status register"]
-        pub fn isr(self) -> Reg<regs::Ixr, R> {
+        #[doc = "CFGR2"]
+        pub fn cfgr2(self) -> Reg<regs::Cfgr2, RW> {
             unsafe { Reg::from_ptr(self.0.add(28usize)) }
         }
-        #[doc = "Interrupt flag clear register"]
-        pub fn icr(self) -> Reg<regs::Ixr, W> {
+        #[doc = "SWPR"]
+        pub fn swpr(self) -> Reg<regs::Swpr, W> {
             unsafe { Reg::from_ptr(self.0.add(32usize)) }
         }
-        #[doc = "Receive data register"]
-        pub fn rdr(self) -> Reg<regs::Dr, R> {
+        #[doc = "SKR"]
+        pub fn skr(self) -> Reg<regs::Skr, W> {
             unsafe { Reg::from_ptr(self.0.add(36usize)) }
         }
-        #[doc = "Transmit data register"]
-        pub fn tdr(self) -> Reg<regs::Dr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(40usize)) }
-        }
     }
     pub mod regs {
         use crate::generic::*;
-        #[doc = "Interrupt & status register"]
+        #[doc = "CFGR2"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ixr(pub u32);
-        impl Ixr {
-            #[doc = "Parity error"]
-            pub const fn pe(&self) -> bool {
+        pub struct Cfgr2(pub u32);
+        impl Cfgr2 {
+            #[doc = "Cortex LOCKUP (Hardfault) output enable bit"]
+            pub const fn cll(&self) -> bool {
                 let val = (self.0 >> 0usize) & 0x01;
                 val != 0
             }
-            #[doc = "Parity error"]
-            pub fn set_pe(&mut self, val: bool) {
+            #[doc = "Cortex LOCKUP (Hardfault) output enable bit"]
+            pub fn set_cll(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
             }
-            #[doc = "Framing error"]
-            pub const fn fe(&self) -> bool {
+            #[doc = "SRAM2 parity lock bit"]
+            pub const fn spl(&self) -> bool {
                 let val = (self.0 >> 1usize) & 0x01;
                 val != 0
             }
-            #[doc = "Framing error"]
-            pub fn set_fe(&mut self, val: bool) {
+            #[doc = "SRAM2 parity lock bit"]
+            pub fn set_spl(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
             }
-            #[doc = "Noise detected flag"]
-            pub const fn nf(&self) -> bool {
+            #[doc = "PVD lock enable bit"]
+            pub const fn pvdl(&self) -> bool {
                 let val = (self.0 >> 2usize) & 0x01;
                 val != 0
             }
-            #[doc = "Noise detected flag"]
-            pub fn set_nf(&mut self, val: bool) {
+            #[doc = "PVD lock enable bit"]
+            pub fn set_pvdl(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
             }
-            #[doc = "Overrun error"]
-            pub const fn ore(&self) -> bool {
+            #[doc = "ECC Lock"]
+            pub const fn eccl(&self) -> bool {
                 let val = (self.0 >> 3usize) & 0x01;
                 val != 0
             }
-            #[doc = "Overrun error"]
-            pub fn set_ore(&mut self, val: bool) {
+            #[doc = "ECC Lock"]
+            pub fn set_eccl(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
             }
-            #[doc = "Idle line detected"]
-            pub const fn idle(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Idle line detected"]
-            pub fn set_idle(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Read data register not empty"]
-            pub const fn rxne(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Read data register not empty"]
-            pub fn set_rxne(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Transmission complete"]
-            pub const fn tc(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transmission complete"]
-            pub fn set_tc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Transmit data register empty"]
-            pub const fn txe(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transmit data register empty"]
-            pub fn set_txe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "LIN break detection flag"]
-            pub const fn lbdf(&self) -> bool {
+            #[doc = "SRAM2 parity error flag"]
+            pub const fn spf(&self) -> bool {
                 let val = (self.0 >> 8usize) & 0x01;
                 val != 0
             }
-            #[doc = "LIN break detection flag"]
-            pub fn set_lbdf(&mut self, val: bool) {
+            #[doc = "SRAM2 parity error flag"]
+            pub fn set_spf(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
             }
-            #[doc = "CTS interrupt flag"]
-            pub const fn ctsif(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CTS interrupt flag"]
-            pub fn set_ctsif(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "CTS flag"]
-            pub const fn cts(&self) -> bool {
-                let val = (self.0 >> 10usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CTS flag"]
-            pub fn set_cts(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
-            }
-            #[doc = "Receiver timeout"]
-            pub const fn rtof(&self) -> bool {
-                let val = (self.0 >> 11usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Receiver timeout"]
-            pub fn set_rtof(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
-            }
-            #[doc = "End of block flag"]
-            pub const fn eobf(&self) -> bool {
-                let val = (self.0 >> 12usize) & 0x01;
-                val != 0
-            }
-            #[doc = "End of block flag"]
-            pub fn set_eobf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
-            }
-            #[doc = "Auto baud rate error"]
-            pub const fn abre(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Auto baud rate error"]
-            pub fn set_abre(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
-            }
-            #[doc = "Auto baud rate flag"]
-            pub const fn abrf(&self) -> bool {
-                let val = (self.0 >> 15usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Auto baud rate flag"]
-            pub fn set_abrf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
-            }
-            #[doc = "Busy flag"]
-            pub const fn busy(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Busy flag"]
-            pub fn set_busy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
-            #[doc = "character match flag"]
-            pub const fn cmf(&self) -> bool {
-                let val = (self.0 >> 17usize) & 0x01;
-                val != 0
-            }
-            #[doc = "character match flag"]
-            pub fn set_cmf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
-            }
-            #[doc = "Send break flag"]
-            pub const fn sbkf(&self) -> bool {
-                let val = (self.0 >> 18usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Send break flag"]
-            pub fn set_sbkf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize);
-            }
-            #[doc = "Receiver wakeup from Mute mode"]
-            pub const fn rwu(&self) -> bool {
-                let val = (self.0 >> 19usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Receiver wakeup from Mute mode"]
-            pub fn set_rwu(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize);
-            }
-            #[doc = "Wakeup from Stop mode flag"]
-            pub const fn wuf(&self) -> bool {
-                let val = (self.0 >> 20usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Wakeup from Stop mode flag"]
-            pub fn set_wuf(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
-            }
-            #[doc = "Transmit enable acknowledge flag"]
-            pub const fn teack(&self) -> bool {
-                let val = (self.0 >> 21usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transmit enable acknowledge flag"]
-            pub fn set_teack(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
-            }
-            #[doc = "Receive enable acknowledge flag"]
-            pub const fn reack(&self) -> bool {
-                let val = (self.0 >> 22usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Receive enable acknowledge flag"]
-            pub fn set_reack(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
+        }
+        impl Default for Cfgr2 {
+            fn default() -> Cfgr2 {
+                Cfgr2(0)
             }
         }
-        impl Default for Ixr {
-            fn default() -> Ixr {
-                Ixr(0)
-            }
-        }
-        #[doc = "Receiver timeout register"]
+        #[doc = "SKR"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Rtor(pub u32);
-        impl Rtor {
-            #[doc = "Receiver timeout value"]
-            pub const fn rto(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0x00ff_ffff;
-                val as u32
-            }
-            #[doc = "Receiver timeout value"]
-            pub fn set_rto(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0x00ff_ffff << 0usize)) | (((val as u32) & 0x00ff_ffff) << 0usize);
-            }
-            #[doc = "Block Length"]
-            pub const fn blen(&self) -> u8 {
-                let val = (self.0 >> 24usize) & 0xff;
-                val as u8
-            }
-            #[doc = "Block Length"]
-            pub fn set_blen(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 24usize)) | (((val as u32) & 0xff) << 24usize);
-            }
-        }
-        impl Default for Rtor {
-            fn default() -> Rtor {
-                Rtor(0)
-            }
-        }
-        #[doc = "Baud rate register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Brr(pub u32);
-        impl Brr {
-            #[doc = "mantissa of USARTDIV"]
-            pub const fn brr(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "mantissa of USARTDIV"]
-            pub fn set_brr(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
-        }
-        impl Default for Brr {
-            fn default() -> Brr {
-                Brr(0)
-            }
-        }
-        #[doc = "Control register 2"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr2(pub u32);
-        impl Cr2 {
-            #[doc = "7-bit Address Detection/4-bit Address Detection"]
-            pub fn addm(&self, n: usize) -> super::vals::Addm {
-                assert!(n < 1usize);
-                let offs = 4usize + n * 0usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Addm(val as u8)
-            }
-            #[doc = "7-bit Address Detection/4-bit Address Detection"]
-            pub fn set_addm(&mut self, n: usize, val: super::vals::Addm) {
-                assert!(n < 1usize);
-                let offs = 4usize + n * 0usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-            #[doc = "LIN break detection length"]
-            pub const fn lbdl(&self) -> super::vals::Lbdl {
-                let val = (self.0 >> 5usize) & 0x01;
-                super::vals::Lbdl(val as u8)
-            }
-            #[doc = "LIN break detection length"]
-            pub fn set_lbdl(&mut self, val: super::vals::Lbdl) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
-            }
-            #[doc = "LIN break detection interrupt enable"]
-            pub const fn lbdie(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LIN break detection interrupt enable"]
-            pub fn set_lbdie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Last bit clock pulse"]
-            pub const fn lbcl(&self) -> super::vals::Lbcl {
-                let val = (self.0 >> 8usize) & 0x01;
-                super::vals::Lbcl(val as u8)
-            }
-            #[doc = "Last bit clock pulse"]
-            pub fn set_lbcl(&mut self, val: super::vals::Lbcl) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Clock phase"]
-            pub const fn cpha(&self) -> super::vals::Cpha {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Cpha(val as u8)
-            }
-            #[doc = "Clock phase"]
-            pub fn set_cpha(&mut self, val: super::vals::Cpha) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "Clock polarity"]
-            pub const fn cpol(&self) -> super::vals::Cpol {
-                let val = (self.0 >> 10usize) & 0x01;
-                super::vals::Cpol(val as u8)
-            }
-            #[doc = "Clock polarity"]
-            pub fn set_cpol(&mut self, val: super::vals::Cpol) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
-            }
-            #[doc = "Clock enable"]
-            pub const fn clken(&self) -> bool {
-                let val = (self.0 >> 11usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Clock enable"]
-            pub fn set_clken(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
-            }
-            #[doc = "STOP bits"]
-            pub const fn stop(&self) -> super::vals::Stop {
-                let val = (self.0 >> 12usize) & 0x03;
-                super::vals::Stop(val as u8)
-            }
-            #[doc = "STOP bits"]
-            pub fn set_stop(&mut self, val: super::vals::Stop) {
-                self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize);
-            }
-            #[doc = "LIN mode enable"]
-            pub const fn linen(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
-                val != 0
-            }
-            #[doc = "LIN mode enable"]
-            pub fn set_linen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
-            }
-            #[doc = "Swap TX/RX pins"]
-            pub const fn swap(&self) -> super::vals::Swap {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Swap(val as u8)
-            }
-            #[doc = "Swap TX/RX pins"]
-            pub fn set_swap(&mut self, val: super::vals::Swap) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
-            #[doc = "RX pin active level inversion"]
-            pub const fn rxinv(&self) -> super::vals::Rxinv {
-                let val = (self.0 >> 16usize) & 0x01;
-                super::vals::Rxinv(val as u8)
-            }
-            #[doc = "RX pin active level inversion"]
-            pub fn set_rxinv(&mut self, val: super::vals::Rxinv) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
-            }
-            #[doc = "TX pin active level inversion"]
-            pub const fn txinv(&self) -> super::vals::Txinv {
-                let val = (self.0 >> 17usize) & 0x01;
-                super::vals::Txinv(val as u8)
-            }
-            #[doc = "TX pin active level inversion"]
-            pub fn set_txinv(&mut self, val: super::vals::Txinv) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
-            }
-            #[doc = "Binary data inversion"]
-            pub const fn datainv(&self) -> super::vals::Datainv {
-                let val = (self.0 >> 18usize) & 0x01;
-                super::vals::Datainv(val as u8)
-            }
-            #[doc = "Binary data inversion"]
-            pub fn set_datainv(&mut self, val: super::vals::Datainv) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
-            }
-            #[doc = "Most significant bit first"]
-            pub const fn msbfirst(&self) -> super::vals::Msbfirst {
-                let val = (self.0 >> 19usize) & 0x01;
-                super::vals::Msbfirst(val as u8)
-            }
-            #[doc = "Most significant bit first"]
-            pub fn set_msbfirst(&mut self, val: super::vals::Msbfirst) {
-                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
-            }
-            #[doc = "Auto baud rate enable"]
-            pub const fn abren(&self) -> bool {
-                let val = (self.0 >> 20usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Auto baud rate enable"]
-            pub fn set_abren(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
-            }
-            #[doc = "Auto baud rate mode"]
-            pub const fn abrmod(&self) -> super::vals::Abrmod {
-                let val = (self.0 >> 21usize) & 0x03;
-                super::vals::Abrmod(val as u8)
-            }
-            #[doc = "Auto baud rate mode"]
-            pub fn set_abrmod(&mut self, val: super::vals::Abrmod) {
-                self.0 = (self.0 & !(0x03 << 21usize)) | (((val.0 as u32) & 0x03) << 21usize);
-            }
-            #[doc = "Receiver timeout enable"]
-            pub const fn rtoen(&self) -> bool {
-                let val = (self.0 >> 23usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Receiver timeout enable"]
-            pub fn set_rtoen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
-            }
-            #[doc = "Address of the USART node"]
-            pub const fn add(&self) -> u8 {
-                let val = (self.0 >> 24usize) & 0xff;
-                val as u8
-            }
-            #[doc = "Address of the USART node"]
-            pub fn set_add(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 24usize)) | (((val as u32) & 0xff) << 24usize);
-            }
-        }
-        impl Default for Cr2 {
-            fn default() -> Cr2 {
-                Cr2(0)
-            }
-        }
-        #[doc = "Request register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Rqr(pub u32);
-        impl Rqr {
-            #[doc = "Auto baud rate request"]
-            pub const fn abrrq(&self) -> super::vals::Abrrq {
-                let val = (self.0 >> 0usize) & 0x01;
-                super::vals::Abrrq(val as u8)
-            }
-            #[doc = "Auto baud rate request"]
-            pub fn set_abrrq(&mut self, val: super::vals::Abrrq) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Send break request"]
-            pub const fn sbkrq(&self) -> super::vals::Sbkrq {
-                let val = (self.0 >> 1usize) & 0x01;
-                super::vals::Sbkrq(val as u8)
-            }
-            #[doc = "Send break request"]
-            pub fn set_sbkrq(&mut self, val: super::vals::Sbkrq) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Mute mode request"]
-            pub const fn mmrq(&self) -> super::vals::Mmrq {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Mmrq(val as u8)
-            }
-            #[doc = "Mute mode request"]
-            pub fn set_mmrq(&mut self, val: super::vals::Mmrq) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Receive data flush request"]
-            pub const fn rxfrq(&self) -> super::vals::Rxfrq {
-                let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Rxfrq(val as u8)
-            }
-            #[doc = "Receive data flush request"]
-            pub fn set_rxfrq(&mut self, val: super::vals::Rxfrq) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Transmit data flush request"]
-            pub const fn txfrq(&self) -> super::vals::Txfrq {
-                let val = (self.0 >> 4usize) & 0x01;
-                super::vals::Txfrq(val as u8)
-            }
-            #[doc = "Transmit data flush request"]
-            pub fn set_txfrq(&mut self, val: super::vals::Txfrq) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
-            }
-        }
-        impl Default for Rqr {
-            fn default() -> Rqr {
-                Rqr(0)
-            }
-        }
-        #[doc = "Data register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Dr(pub u32);
-        impl Dr {
-            #[doc = "data value"]
-            pub const fn dr(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x01ff;
-                val as u16
-            }
-            #[doc = "data value"]
-            pub fn set_dr(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize);
-            }
-        }
-        impl Default for Dr {
-            fn default() -> Dr {
-                Dr(0)
-            }
-        }
-        #[doc = "Guard time and prescaler register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Gtpr(pub u32);
-        impl Gtpr {
-            #[doc = "Prescaler value"]
-            pub const fn psc(&self) -> u8 {
+        pub struct Skr(pub u32);
+        impl Skr {
+            #[doc = "SRAM2 write protection key for software erase"]
+            pub const fn key(&self) -> u8 {
                 let val = (self.0 >> 0usize) & 0xff;
                 val as u8
             }
-            #[doc = "Prescaler value"]
-            pub fn set_psc(&mut self, val: u8) {
+            #[doc = "SRAM2 write protection key for software erase"]
+            pub fn set_key(&mut self, val: u8) {
                 self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
             }
-            #[doc = "Guard time value"]
-            pub const fn gt(&self) -> u8 {
-                let val = (self.0 >> 8usize) & 0xff;
-                val as u8
-            }
-            #[doc = "Guard time value"]
-            pub fn set_gt(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize);
+        }
+        impl Default for Skr {
+            fn default() -> Skr {
+                Skr(0)
             }
         }
-        impl Default for Gtpr {
-            fn default() -> Gtpr {
-                Gtpr(0)
-            }
-        }
-        #[doc = "Control register 3"]
+        #[doc = "memory remap register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr3(pub u32);
-        impl Cr3 {
-            #[doc = "Error interrupt enable"]
-            pub const fn eie(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
+        pub struct Memrmp(pub u32);
+        impl Memrmp {
+            #[doc = "Memory mapping selection"]
+            pub const fn mem_mode(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0x07;
+                val as u8
             }
-            #[doc = "Error interrupt enable"]
-            pub fn set_eie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            #[doc = "Memory mapping selection"]
+            pub fn set_mem_mode(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x07 << 0usize)) | (((val as u32) & 0x07) << 0usize);
             }
-            #[doc = "IrDA mode enable"]
-            pub const fn iren(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IrDA mode enable"]
-            pub fn set_iren(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "IrDA low-power"]
-            pub const fn irlp(&self) -> super::vals::Irlp {
-                let val = (self.0 >> 2usize) & 0x01;
-                super::vals::Irlp(val as u8)
-            }
-            #[doc = "IrDA low-power"]
-            pub fn set_irlp(&mut self, val: super::vals::Irlp) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Half-duplex selection"]
-            pub const fn hdsel(&self) -> super::vals::Hdsel {
+            #[doc = "QUADSPI memory mapping swap"]
+            pub const fn qfs(&self) -> bool {
                 let val = (self.0 >> 3usize) & 0x01;
-                super::vals::Hdsel(val as u8)
-            }
-            #[doc = "Half-duplex selection"]
-            pub fn set_hdsel(&mut self, val: super::vals::Hdsel) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Smartcard NACK enable"]
-            pub const fn nack(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
                 val != 0
             }
-            #[doc = "Smartcard NACK enable"]
-            pub fn set_nack(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            #[doc = "QUADSPI memory mapping swap"]
+            pub fn set_qfs(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
             }
-            #[doc = "Smartcard mode enable"]
-            pub const fn scen(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Smartcard mode enable"]
-            pub fn set_scen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "DMA enable receiver"]
-            pub const fn dmar(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DMA enable receiver"]
-            pub fn set_dmar(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "DMA enable transmitter"]
-            pub const fn dmat(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DMA enable transmitter"]
-            pub fn set_dmat(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "RTS enable"]
-            pub const fn rtse(&self) -> bool {
+            #[doc = "Flash Bank mode selection"]
+            pub const fn fb_mode(&self) -> bool {
                 let val = (self.0 >> 8usize) & 0x01;
                 val != 0
             }
-            #[doc = "RTS enable"]
-            pub fn set_rtse(&mut self, val: bool) {
+            #[doc = "Flash Bank mode selection"]
+            pub fn set_fb_mode(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
             }
-            #[doc = "CTS enable"]
-            pub const fn ctse(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
+        }
+        impl Default for Memrmp {
+            fn default() -> Memrmp {
+                Memrmp(0)
+            }
+        }
+        #[doc = "SCSR"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Scsr(pub u32);
+        impl Scsr {
+            #[doc = "SRAM2 Erase"]
+            pub const fn sram2er(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
                 val != 0
             }
-            #[doc = "CTS enable"]
-            pub fn set_ctse(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            #[doc = "SRAM2 Erase"]
+            pub fn set_sram2er(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
             }
-            #[doc = "CTS interrupt enable"]
-            pub const fn ctsie(&self) -> bool {
-                let val = (self.0 >> 10usize) & 0x01;
+            #[doc = "SRAM2 busy by erase operation"]
+            pub const fn sram2bsy(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
                 val != 0
             }
-            #[doc = "CTS interrupt enable"]
-            pub fn set_ctsie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            #[doc = "SRAM2 busy by erase operation"]
+            pub fn set_sram2bsy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
             }
-            #[doc = "One sample bit method enable"]
-            pub const fn onebit(&self) -> super::vals::Onebit {
-                let val = (self.0 >> 11usize) & 0x01;
-                super::vals::Onebit(val as u8)
+        }
+        impl Default for Scsr {
+            fn default() -> Scsr {
+                Scsr(0)
             }
-            #[doc = "One sample bit method enable"]
-            pub fn set_onebit(&mut self, val: super::vals::Onebit) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
-            }
-            #[doc = "Overrun Disable"]
-            pub const fn ovrdis(&self) -> super::vals::Ovrdis {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::Ovrdis(val as u8)
-            }
-            #[doc = "Overrun Disable"]
-            pub fn set_ovrdis(&mut self, val: super::vals::Ovrdis) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "DMA Disable on Reception Error"]
-            pub const fn ddre(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
+        }
+        #[doc = "configuration register 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cfgr1(pub u32);
+        impl Cfgr1 {
+            #[doc = "Firewall disable"]
+            pub const fn fwdis(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
                 val != 0
             }
-            #[doc = "DMA Disable on Reception Error"]
-            pub fn set_ddre(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            #[doc = "Firewall disable"]
+            pub fn set_fwdis(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
             }
-            #[doc = "Driver enable mode"]
-            pub const fn dem(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
+            #[doc = "I/O analog switch voltage booster enable"]
+            pub const fn boosten(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
                 val != 0
             }
-            #[doc = "Driver enable mode"]
-            pub fn set_dem(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            #[doc = "I/O analog switch voltage booster enable"]
+            pub fn set_boosten(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
             }
-            #[doc = "Driver enable polarity selection"]
-            pub const fn dep(&self) -> super::vals::Dep {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Dep(val as u8)
+            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB6"]
+            pub const fn i2c_pb6_fmp(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
             }
-            #[doc = "Driver enable polarity selection"]
-            pub fn set_dep(&mut self, val: super::vals::Dep) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB6"]
+            pub fn set_i2c_pb6_fmp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
             }
-            #[doc = "Smartcard auto-retry count"]
-            pub const fn scarcnt(&self) -> u8 {
-                let val = (self.0 >> 17usize) & 0x07;
-                val as u8
+            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB7"]
+            pub const fn i2c_pb7_fmp(&self) -> bool {
+                let val = (self.0 >> 17usize) & 0x01;
+                val != 0
             }
-            #[doc = "Smartcard auto-retry count"]
-            pub fn set_scarcnt(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x07 << 17usize)) | (((val as u32) & 0x07) << 17usize);
+            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB7"]
+            pub fn set_i2c_pb7_fmp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
             }
-            #[doc = "Wakeup from Stop mode interrupt flag selection"]
-            pub const fn wus(&self) -> super::vals::Wus {
-                let val = (self.0 >> 20usize) & 0x03;
-                super::vals::Wus(val as u8)
+            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB8"]
+            pub const fn i2c_pb8_fmp(&self) -> bool {
+                let val = (self.0 >> 18usize) & 0x01;
+                val != 0
             }
-            #[doc = "Wakeup from Stop mode interrupt flag selection"]
-            pub fn set_wus(&mut self, val: super::vals::Wus) {
-                self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize);
+            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB8"]
+            pub fn set_i2c_pb8_fmp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize);
             }
-            #[doc = "Wakeup from Stop mode interrupt enable"]
-            pub const fn wufie(&self) -> bool {
+            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB9"]
+            pub const fn i2c_pb9_fmp(&self) -> bool {
+                let val = (self.0 >> 19usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Fast-mode Plus (Fm+) driving capability activation on PB9"]
+            pub fn set_i2c_pb9_fmp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize);
+            }
+            #[doc = "I2C1 Fast-mode Plus driving capability activation"]
+            pub const fn i2c1_fmp(&self) -> bool {
+                let val = (self.0 >> 20usize) & 0x01;
+                val != 0
+            }
+            #[doc = "I2C1 Fast-mode Plus driving capability activation"]
+            pub fn set_i2c1_fmp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
+            }
+            #[doc = "I2C2 Fast-mode Plus driving capability activation"]
+            pub const fn i2c2_fmp(&self) -> bool {
+                let val = (self.0 >> 21usize) & 0x01;
+                val != 0
+            }
+            #[doc = "I2C2 Fast-mode Plus driving capability activation"]
+            pub fn set_i2c2_fmp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
+            }
+            #[doc = "I2C3 Fast-mode Plus driving capability activation"]
+            pub const fn i2c3_fmp(&self) -> bool {
                 let val = (self.0 >> 22usize) & 0x01;
                 val != 0
             }
-            #[doc = "Wakeup from Stop mode interrupt enable"]
-            pub fn set_wufie(&mut self, val: bool) {
+            #[doc = "I2C3 Fast-mode Plus driving capability activation"]
+            pub fn set_i2c3_fmp(&mut self, val: bool) {
                 self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
             }
-        }
-        impl Default for Cr3 {
-            fn default() -> Cr3 {
-                Cr3(0)
+            #[doc = "Floating Point Unit interrupts enable bits"]
+            pub const fn fpu_ie(&self) -> u8 {
+                let val = (self.0 >> 26usize) & 0x3f;
+                val as u8
+            }
+            #[doc = "Floating Point Unit interrupts enable bits"]
+            pub fn set_fpu_ie(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x3f << 26usize)) | (((val as u32) & 0x3f) << 26usize);
             }
         }
-        #[doc = "Control register 1"]
+        impl Default for Cfgr1 {
+            fn default() -> Cfgr1 {
+                Cfgr1(0)
+            }
+        }
+        #[doc = "external interrupt configuration register 4"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr1(pub u32);
-        impl Cr1 {
-            #[doc = "USART enable"]
-            pub const fn ue(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
+        pub struct Exticr(pub u32);
+        impl Exticr {
+            #[doc = "EXTI12 configuration bits"]
+            pub fn exti(&self, n: usize) -> u8 {
+                assert!(n < 4usize);
+                let offs = 0usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x0f;
+                val as u8
             }
-            #[doc = "USART enable"]
-            pub fn set_ue(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            #[doc = "EXTI12 configuration bits"]
+            pub fn set_exti(&mut self, n: usize, val: u8) {
+                assert!(n < 4usize);
+                let offs = 0usize + n * 4usize;
+                self.0 = (self.0 & !(0x0f << offs)) | (((val as u32) & 0x0f) << offs);
             }
-            #[doc = "USART enable in Stop mode"]
-            pub const fn uesm(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
+        }
+        impl Default for Exticr {
+            fn default() -> Exticr {
+                Exticr(0)
             }
-            #[doc = "USART enable in Stop mode"]
-            pub fn set_uesm(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Receiver enable"]
-            pub const fn re(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Receiver enable"]
-            pub fn set_re(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Transmitter enable"]
-            pub const fn te(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transmitter enable"]
-            pub fn set_te(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "IDLE interrupt enable"]
-            pub const fn idleie(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IDLE interrupt enable"]
-            pub fn set_idleie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "RXNE interrupt enable"]
-            pub const fn rxneie(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "RXNE interrupt enable"]
-            pub fn set_rxneie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Transmission complete interrupt enable"]
-            pub const fn tcie(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Transmission complete interrupt enable"]
-            pub fn set_tcie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "interrupt enable"]
-            pub const fn txeie(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "interrupt enable"]
-            pub fn set_txeie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "PE interrupt enable"]
-            pub const fn peie(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "PE interrupt enable"]
-            pub fn set_peie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Parity selection"]
-            pub const fn ps(&self) -> super::vals::Ps {
-                let val = (self.0 >> 9usize) & 0x01;
-                super::vals::Ps(val as u8)
-            }
-            #[doc = "Parity selection"]
-            pub fn set_ps(&mut self, val: super::vals::Ps) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
-            }
-            #[doc = "Parity control enable"]
-            pub const fn pce(&self) -> bool {
-                let val = (self.0 >> 10usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Parity control enable"]
-            pub fn set_pce(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
-            }
-            #[doc = "Receiver wakeup method"]
-            pub const fn wake(&self) -> bool {
-                let val = (self.0 >> 11usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Receiver wakeup method"]
-            pub fn set_wake(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
-            }
-            #[doc = "Word length"]
-            pub const fn m0(&self) -> super::vals::M0 {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::M0(val as u8)
-            }
-            #[doc = "Word length"]
-            pub fn set_m0(&mut self, val: super::vals::M0) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "Word length"]
-            pub const fn m1(&self) -> super::vals::M1 {
-                let val = (self.0 >> 12usize) & 0x01;
-                super::vals::M1(val as u8)
-            }
-            #[doc = "Word length"]
-            pub fn set_m1(&mut self, val: super::vals::M1) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
-            }
-            #[doc = "Mute mode enable"]
-            pub const fn mme(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Mute mode enable"]
-            pub fn set_mme(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
-            }
-            #[doc = "Character match interrupt enable"]
-            pub const fn cmie(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Character match interrupt enable"]
-            pub fn set_cmie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
-            }
-            #[doc = "Oversampling mode"]
-            pub fn over(&self, n: usize) -> super::vals::Over {
-                assert!(n < 1usize);
-                let offs = 15usize + n * 0usize;
+        }
+        #[doc = "SWPR"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Swpr(pub u32);
+        impl Swpr {
+            #[doc = "SRAWM2 write protection."]
+            pub fn pwp(&self, n: usize) -> bool {
+                assert!(n < 32usize);
+                let offs = 0usize + n * 1usize;
                 let val = (self.0 >> offs) & 0x01;
-                super::vals::Over(val as u8)
-            }
-            #[doc = "Oversampling mode"]
-            pub fn set_over(&mut self, n: usize, val: super::vals::Over) {
-                assert!(n < 1usize);
-                let offs = 15usize + n * 0usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-            #[doc = "Driver Enable deassertion time"]
-            pub const fn dedt(&self) -> u8 {
-                let val = (self.0 >> 16usize) & 0x1f;
-                val as u8
-            }
-            #[doc = "Driver Enable deassertion time"]
-            pub fn set_dedt(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x1f << 16usize)) | (((val as u32) & 0x1f) << 16usize);
-            }
-            #[doc = "Driver Enable assertion time"]
-            pub const fn deat(&self) -> u8 {
-                let val = (self.0 >> 21usize) & 0x1f;
-                val as u8
-            }
-            #[doc = "Driver Enable assertion time"]
-            pub fn set_deat(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x1f << 21usize)) | (((val as u32) & 0x1f) << 21usize);
-            }
-            #[doc = "Receiver timeout interrupt enable"]
-            pub const fn rtoie(&self) -> bool {
-                let val = (self.0 >> 26usize) & 0x01;
                 val != 0
             }
-            #[doc = "Receiver timeout interrupt enable"]
-            pub fn set_rtoie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
-            }
-            #[doc = "End of Block interrupt enable"]
-            pub const fn eobie(&self) -> bool {
-                let val = (self.0 >> 27usize) & 0x01;
-                val != 0
-            }
-            #[doc = "End of Block interrupt enable"]
-            pub fn set_eobie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize);
+            #[doc = "SRAWM2 write protection."]
+            pub fn set_pwp(&mut self, n: usize, val: bool) {
+                assert!(n < 32usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
             }
         }
-        impl Default for Cr1 {
-            fn default() -> Cr1 {
-                Cr1(0)
+        impl Default for Swpr {
+            fn default() -> Swpr {
+                Swpr(0)
             }
         }
     }
-    pub mod vals {
-        use crate::generic::*;
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Dep(pub u8);
-        impl Dep {
-            #[doc = "DE signal is active high"]
-            pub const HIGH: Self = Self(0);
-            #[doc = "DE signal is active low"]
-            pub const LOW: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Addm(pub u8);
-        impl Addm {
-            #[doc = "4-bit address detection"]
-            pub const BIT4: Self = Self(0);
-            #[doc = "7-bit address detection"]
-            pub const BIT7: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Wus(pub u8);
-        impl Wus {
-            #[doc = "WUF active on address match"]
-            pub const ADDRESS: Self = Self(0);
-            #[doc = "WuF active on Start bit detection"]
-            pub const START: Self = Self(0x02);
-            #[doc = "WUF active on RXNE"]
-            pub const RXNE: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Rxfrq(pub u8);
-        impl Rxfrq {
-            #[doc = "clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition"]
-            pub const DISCARD: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ddre(pub u8);
-        impl Ddre {
-            #[doc = "DMA is not disabled in case of reception error"]
-            pub const NOTDISABLED: Self = Self(0);
-            #[doc = "DMA is disabled following a reception error"]
-            pub const DISABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ps(pub u8);
-        impl Ps {
-            #[doc = "Even parity"]
-            pub const EVEN: Self = Self(0);
-            #[doc = "Odd parity"]
-            pub const ODD: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Cpol(pub u8);
-        impl Cpol {
-            #[doc = "Steady low value on CK pin outside transmission window"]
-            pub const LOW: Self = Self(0);
-            #[doc = "Steady high value on CK pin outside transmission window"]
-            pub const HIGH: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Onebit(pub u8);
-        impl Onebit {
-            #[doc = "Three sample bit method"]
-            pub const SAMPLE3: Self = Self(0);
-            #[doc = "One sample bit method"]
-            pub const SAMPLE1: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Msbfirst(pub u8);
-        impl Msbfirst {
-            #[doc = "data is transmitted/received with data bit 0 first, following the start bit"]
-            pub const LSB: Self = Self(0);
-            #[doc = "data is transmitted/received with MSB (bit 7/8/9) first, following the start bit"]
-            pub const MSB: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Mmrq(pub u8);
-        impl Mmrq {
-            #[doc = "Puts the USART in mute mode and sets the RWU flag"]
-            pub const MUTE: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Txinv(pub u8);
-        impl Txinv {
-            #[doc = "TX pin signal works using the standard logic levels"]
-            pub const STANDARD: Self = Self(0);
-            #[doc = "TX pin signal values are inverted"]
-            pub const INVERTED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ovrdis(pub u8);
-        impl Ovrdis {
-            #[doc = "Overrun Error Flag, ORE, is set when received data is not read before receiving new data"]
-            pub const ENABLED: Self = Self(0);
-            #[doc = "Overrun functionality is disabled. If new data is received while the RXNE flag is still set the ORE flag is not set and the new received data overwrites the previous content of the RDR register"]
-            pub const DISABLED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lbdl(pub u8);
-        impl Lbdl {
-            #[doc = "10-bit break detection"]
-            pub const BIT10: Self = Self(0);
-            #[doc = "11-bit break detection"]
-            pub const BIT11: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Sbkrq(pub u8);
-        impl Sbkrq {
-            #[doc = "sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available"]
-            pub const BREAK: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Abrrq(pub u8);
-        impl Abrrq {
-            #[doc = "resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame"]
-            pub const REQUEST: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Stop(pub u8);
-        impl Stop {
-            #[doc = "1 stop bit"]
-            pub const STOP1: Self = Self(0);
-            #[doc = "0.5 stop bit"]
-            pub const STOP0P5: Self = Self(0x01);
-            #[doc = "2 stop bit"]
-            pub const STOP2: Self = Self(0x02);
-            #[doc = "1.5 stop bit"]
-            pub const STOP1P5: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct M1(pub u8);
-        impl M1 {
-            #[doc = "Use M0 to set the data bits"]
-            pub const M0: Self = Self(0);
-            #[doc = "1 start bit, 7 data bits, n stop bits"]
-            pub const BIT7: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Cpha(pub u8);
-        impl Cpha {
-            #[doc = "The first clock transition is the first data capture edge"]
-            pub const FIRST: Self = Self(0);
-            #[doc = "The second clock transition is the first data capture edge"]
-            pub const SECOND: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct M0(pub u8);
-        impl M0 {
-            #[doc = "1 start bit, 8 data bits, n stop bits"]
-            pub const BIT8: Self = Self(0);
-            #[doc = "1 start bit, 9 data bits, n stop bits"]
-            pub const BIT9: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Irlp(pub u8);
-        impl Irlp {
-            #[doc = "Normal mode"]
-            pub const NORMAL: Self = Self(0);
-            #[doc = "Low-power mode"]
-            pub const LOWPOWER: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Over(pub u8);
-        impl Over {
-            #[doc = "Oversampling by 16"]
-            pub const OVERSAMPLING16: Self = Self(0);
-            #[doc = "Oversampling by 8"]
-            pub const OVERSAMPLING8: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Rxinv(pub u8);
-        impl Rxinv {
-            #[doc = "RX pin signal works using the standard logic levels"]
-            pub const STANDARD: Self = Self(0);
-            #[doc = "RX pin signal values are inverted"]
-            pub const INVERTED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Abrmod(pub u8);
-        impl Abrmod {
-            #[doc = "Measurement of the start bit is used to detect the baud rate"]
-            pub const START: Self = Self(0);
-            #[doc = "Falling edge to falling edge measurement"]
-            pub const EDGE: Self = Self(0x01);
-            #[doc = "0x7F frame detection"]
-            pub const FRAME7F: Self = Self(0x02);
-            #[doc = "0x55 frame detection"]
-            pub const FRAME55: Self = Self(0x03);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Datainv(pub u8);
-        impl Datainv {
-            #[doc = "Logical data from the data register are send/received in positive/direct logic"]
-            pub const POSITIVE: Self = Self(0);
-            #[doc = "Logical data from the data register are send/received in negative/inverse logic"]
-            pub const NEGATIVE: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Swap(pub u8);
-        impl Swap {
-            #[doc = "TX/RX pins are used as defined in standard pinout"]
-            pub const STANDARD: Self = Self(0);
-            #[doc = "The TX and RX pins functions are swapped"]
-            pub const SWAPPED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lbcl(pub u8);
-        impl Lbcl {
-            #[doc = "The clock pulse of the last data bit is not output to the CK pin"]
-            pub const NOTOUTPUT: Self = Self(0);
-            #[doc = "The clock pulse of the last data bit is output to the CK pin"]
-            pub const OUTPUT: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Txfrq(pub u8);
-        impl Txfrq {
-            #[doc = "Set the TXE flags. This allows to discard the transmit data"]
-            pub const DISCARD: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hdsel(pub u8);
-        impl Hdsel {
-            #[doc = "Half duplex mode is not selected"]
-            pub const NOTSELECTED: Self = Self(0);
-            #[doc = "Half duplex mode is selected"]
-            pub const SELECTED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Wake(pub u8);
-        impl Wake {
-            #[doc = "Idle line"]
-            pub const IDLE: Self = Self(0);
-            #[doc = "Address mask"]
-            pub const ADDRESS: Self = Self(0x01);
-        }
-    }
 }
 pub mod gpio_v1 {
     use crate::generic::*;
@@ -21521,117 +13052,91 @@ pub mod gpio_v1 {
             unsafe { Reg::from_ptr(self.0.add(24usize)) }
         }
     }
+    pub mod vals {
+        use crate::generic::*;
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Mode(pub u8);
+        impl Mode {
+            #[doc = "Input mode (reset state)"]
+            pub const INPUT: Self = Self(0);
+            #[doc = "Output mode 10 MHz"]
+            pub const OUTPUT: Self = Self(0x01);
+            #[doc = "Output mode 2 MHz"]
+            pub const OUTPUT2: Self = Self(0x02);
+            #[doc = "Output mode 50 MHz"]
+            pub const OUTPUT50: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lckk(pub u8);
+        impl Lckk {
+            #[doc = "Port configuration lock key not active"]
+            pub const NOTACTIVE: Self = Self(0);
+            #[doc = "Port configuration lock key active"]
+            pub const ACTIVE: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Odr(pub u8);
+        impl Odr {
+            #[doc = "Set output to logic low"]
+            pub const LOW: Self = Self(0);
+            #[doc = "Set output to logic high"]
+            pub const HIGH: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Brw(pub u8);
+        impl Brw {
+            #[doc = "No action on the corresponding ODx bit"]
+            pub const NOACTION: Self = Self(0);
+            #[doc = "Reset the ODx bit"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lck(pub u8);
+        impl Lck {
+            #[doc = "Port configuration not locked"]
+            pub const UNLOCKED: Self = Self(0);
+            #[doc = "Port configuration locked"]
+            pub const LOCKED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Cnf(pub u8);
+        impl Cnf {
+            #[doc = "Analog mode / Push-Pull mode"]
+            pub const PUSHPULL: Self = Self(0);
+            #[doc = "Floating input (reset state) / Open Drain-Mode"]
+            pub const OPENDRAIN: Self = Self(0x01);
+            #[doc = "Input with pull-up/pull-down / Alternate Function Push-Pull Mode"]
+            pub const ALTPUSHPULL: Self = Self(0x02);
+            #[doc = "Alternate Function Open-Drain Mode"]
+            pub const ALTOPENDRAIN: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Idr(pub u8);
+        impl Idr {
+            #[doc = "Input is logic low"]
+            pub const LOW: Self = Self(0);
+            #[doc = "Input is logic high"]
+            pub const HIGH: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Bsw(pub u8);
+        impl Bsw {
+            #[doc = "No action on the corresponding ODx bit"]
+            pub const NOACTION: Self = Self(0);
+            #[doc = "Sets the corresponding ODRx bit"]
+            pub const SET: Self = Self(0x01);
+        }
+    }
     pub mod regs {
         use crate::generic::*;
-        #[doc = "Port output data register (GPIOn_ODR)"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Odr(pub u32);
-        impl Odr {
-            #[doc = "Port output data"]
-            pub fn odr(&self, n: usize) -> super::vals::Odr {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Odr(val as u8)
-            }
-            #[doc = "Port output data"]
-            pub fn set_odr(&mut self, n: usize, val: super::vals::Odr) {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Odr {
-            fn default() -> Odr {
-                Odr(0)
-            }
-        }
-        #[doc = "Port input data register (GPIOn_IDR)"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Idr(pub u32);
-        impl Idr {
-            #[doc = "Port input data"]
-            pub fn idr(&self, n: usize) -> super::vals::Idr {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                super::vals::Idr(val as u8)
-            }
-            #[doc = "Port input data"]
-            pub fn set_idr(&mut self, n: usize, val: super::vals::Idr) {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Idr {
-            fn default() -> Idr {
-                Idr(0)
-            }
-        }
-        #[doc = "Port bit reset register (GPIOn_BRR)"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Brr(pub u32);
-        impl Brr {
-            #[doc = "Reset bit"]
-            pub fn br(&self, n: usize) -> bool {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Reset bit"]
-            pub fn set_br(&mut self, n: usize, val: bool) {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Brr {
-            fn default() -> Brr {
-                Brr(0)
-            }
-        }
-        #[doc = "Port bit set/reset register (GPIOn_BSRR)"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Bsrr(pub u32);
-        impl Bsrr {
-            #[doc = "Set bit"]
-            pub fn bs(&self, n: usize) -> bool {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Set bit"]
-            pub fn set_bs(&mut self, n: usize, val: bool) {
-                assert!(n < 16usize);
-                let offs = 0usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-            #[doc = "Reset bit"]
-            pub fn br(&self, n: usize) -> bool {
-                assert!(n < 16usize);
-                let offs = 16usize + n * 1usize;
-                let val = (self.0 >> offs) & 0x01;
-                val != 0
-            }
-            #[doc = "Reset bit"]
-            pub fn set_br(&mut self, n: usize, val: bool) {
-                assert!(n < 16usize);
-                let offs = 16usize + n * 1usize;
-                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
-            }
-        }
-        impl Default for Bsrr {
-            fn default() -> Bsrr {
-                Bsrr(0)
-            }
-        }
         #[doc = "Port configuration register (GPIOn_CRx)"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -21702,88 +13207,1149 @@ pub mod gpio_v1 {
                 Lckr(0)
             }
         }
+        #[doc = "Port bit reset register (GPIOn_BRR)"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Brr(pub u32);
+        impl Brr {
+            #[doc = "Reset bit"]
+            pub fn br(&self, n: usize) -> bool {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Reset bit"]
+            pub fn set_br(&mut self, n: usize, val: bool) {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Brr {
+            fn default() -> Brr {
+                Brr(0)
+            }
+        }
+        #[doc = "Port bit set/reset register (GPIOn_BSRR)"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Bsrr(pub u32);
+        impl Bsrr {
+            #[doc = "Set bit"]
+            pub fn bs(&self, n: usize) -> bool {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Set bit"]
+            pub fn set_bs(&mut self, n: usize, val: bool) {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Reset bit"]
+            pub fn br(&self, n: usize) -> bool {
+                assert!(n < 16usize);
+                let offs = 16usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Reset bit"]
+            pub fn set_br(&mut self, n: usize, val: bool) {
+                assert!(n < 16usize);
+                let offs = 16usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Bsrr {
+            fn default() -> Bsrr {
+                Bsrr(0)
+            }
+        }
+        #[doc = "Port input data register (GPIOn_IDR)"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Idr(pub u32);
+        impl Idr {
+            #[doc = "Port input data"]
+            pub fn idr(&self, n: usize) -> super::vals::Idr {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Idr(val as u8)
+            }
+            #[doc = "Port input data"]
+            pub fn set_idr(&mut self, n: usize, val: super::vals::Idr) {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Idr {
+            fn default() -> Idr {
+                Idr(0)
+            }
+        }
+        #[doc = "Port output data register (GPIOn_ODR)"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Odr(pub u32);
+        impl Odr {
+            #[doc = "Port output data"]
+            pub fn odr(&self, n: usize) -> super::vals::Odr {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Odr(val as u8)
+            }
+            #[doc = "Port output data"]
+            pub fn set_odr(&mut self, n: usize, val: super::vals::Odr) {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Odr {
+            fn default() -> Odr {
+                Odr(0)
+            }
+        }
+    }
+}
+pub mod i2c_v2 {
+    use crate::generic::*;
+    #[doc = "Inter-integrated circuit"]
+    #[derive(Copy, Clone)]
+    pub struct I2c(pub *mut u8);
+    unsafe impl Send for I2c {}
+    unsafe impl Sync for I2c {}
+    impl I2c {
+        #[doc = "Control register 1"]
+        pub fn cr1(self) -> Reg<regs::Cr1, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "Control register 2"]
+        pub fn cr2(self) -> Reg<regs::Cr2, RW> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "Own address register 1"]
+        pub fn oar1(self) -> Reg<regs::Oar1, RW> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        }
+        #[doc = "Own address register 2"]
+        pub fn oar2(self) -> Reg<regs::Oar2, RW> {
+            unsafe { Reg::from_ptr(self.0.add(12usize)) }
+        }
+        #[doc = "Timing register"]
+        pub fn timingr(self) -> Reg<regs::Timingr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(16usize)) }
+        }
+        #[doc = "Status register 1"]
+        pub fn timeoutr(self) -> Reg<regs::Timeoutr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(20usize)) }
+        }
+        #[doc = "Interrupt and Status register"]
+        pub fn isr(self) -> Reg<regs::Isr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(24usize)) }
+        }
+        #[doc = "Interrupt clear register"]
+        pub fn icr(self) -> Reg<regs::Icr, W> {
+            unsafe { Reg::from_ptr(self.0.add(28usize)) }
+        }
+        #[doc = "PEC register"]
+        pub fn pecr(self) -> Reg<regs::Pecr, R> {
+            unsafe { Reg::from_ptr(self.0.add(32usize)) }
+        }
+        #[doc = "Receive data register"]
+        pub fn rxdr(self) -> Reg<regs::Rxdr, R> {
+            unsafe { Reg::from_ptr(self.0.add(36usize)) }
+        }
+        #[doc = "Transmit data register"]
+        pub fn txdr(self) -> Reg<regs::Txdr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(40usize)) }
+        }
+    }
+    pub mod regs {
+        use crate::generic::*;
+        #[doc = "Receive data register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Rxdr(pub u32);
+        impl Rxdr {
+            #[doc = "8-bit receive data"]
+            pub const fn rxdata(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0xff;
+                val as u8
+            }
+            #[doc = "8-bit receive data"]
+            pub fn set_rxdata(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
+            }
+        }
+        impl Default for Rxdr {
+            fn default() -> Rxdr {
+                Rxdr(0)
+            }
+        }
+        #[doc = "Control register 2"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr2(pub u32);
+        impl Cr2 {
+            #[doc = "Slave address bit (master mode)"]
+            pub const fn sadd(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x03ff;
+                val as u16
+            }
+            #[doc = "Slave address bit (master mode)"]
+            pub fn set_sadd(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x03ff << 0usize)) | (((val as u32) & 0x03ff) << 0usize);
+            }
+            #[doc = "Transfer direction (master mode)"]
+            pub const fn rd_wrn(&self) -> super::vals::RdWrn {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::RdWrn(val as u8)
+            }
+            #[doc = "Transfer direction (master mode)"]
+            pub fn set_rd_wrn(&mut self, val: super::vals::RdWrn) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "10-bit addressing mode (master mode)"]
+            pub const fn add10(&self) -> super::vals::Add {
+                let val = (self.0 >> 11usize) & 0x01;
+                super::vals::Add(val as u8)
+            }
+            #[doc = "10-bit addressing mode (master mode)"]
+            pub fn set_add10(&mut self, val: super::vals::Add) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
+            }
+            #[doc = "10-bit address header only read direction (master receiver mode)"]
+            pub const fn head10r(&self) -> super::vals::Headr {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Headr(val as u8)
+            }
+            #[doc = "10-bit address header only read direction (master receiver mode)"]
+            pub fn set_head10r(&mut self, val: super::vals::Headr) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "Start generation"]
+            pub const fn start(&self) -> super::vals::Start {
+                let val = (self.0 >> 13usize) & 0x01;
+                super::vals::Start(val as u8)
+            }
+            #[doc = "Start generation"]
+            pub fn set_start(&mut self, val: super::vals::Start) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize);
+            }
+            #[doc = "Stop generation (master mode)"]
+            pub const fn stop(&self) -> super::vals::Stop {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Stop(val as u8)
+            }
+            #[doc = "Stop generation (master mode)"]
+            pub fn set_stop(&mut self, val: super::vals::Stop) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "NACK generation (slave mode)"]
+            pub const fn nack(&self) -> super::vals::Nack {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Nack(val as u8)
+            }
+            #[doc = "NACK generation (slave mode)"]
+            pub fn set_nack(&mut self, val: super::vals::Nack) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "Number of bytes"]
+            pub const fn nbytes(&self) -> u8 {
+                let val = (self.0 >> 16usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Number of bytes"]
+            pub fn set_nbytes(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 16usize)) | (((val as u32) & 0xff) << 16usize);
+            }
+            #[doc = "NBYTES reload mode"]
+            pub const fn reload(&self) -> super::vals::Reload {
+                let val = (self.0 >> 24usize) & 0x01;
+                super::vals::Reload(val as u8)
+            }
+            #[doc = "NBYTES reload mode"]
+            pub fn set_reload(&mut self, val: super::vals::Reload) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val.0 as u32) & 0x01) << 24usize);
+            }
+            #[doc = "Automatic end mode (master mode)"]
+            pub const fn autoend(&self) -> super::vals::Autoend {
+                let val = (self.0 >> 25usize) & 0x01;
+                super::vals::Autoend(val as u8)
+            }
+            #[doc = "Automatic end mode (master mode)"]
+            pub fn set_autoend(&mut self, val: super::vals::Autoend) {
+                self.0 = (self.0 & !(0x01 << 25usize)) | (((val.0 as u32) & 0x01) << 25usize);
+            }
+            #[doc = "Packet error checking byte"]
+            pub const fn pecbyte(&self) -> super::vals::Pecbyte {
+                let val = (self.0 >> 26usize) & 0x01;
+                super::vals::Pecbyte(val as u8)
+            }
+            #[doc = "Packet error checking byte"]
+            pub fn set_pecbyte(&mut self, val: super::vals::Pecbyte) {
+                self.0 = (self.0 & !(0x01 << 26usize)) | (((val.0 as u32) & 0x01) << 26usize);
+            }
+        }
+        impl Default for Cr2 {
+            fn default() -> Cr2 {
+                Cr2(0)
+            }
+        }
+        #[doc = "Control register 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr1(pub u32);
+        impl Cr1 {
+            #[doc = "Peripheral enable"]
+            pub const fn pe(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Peripheral enable"]
+            pub fn set_pe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "TX Interrupt enable"]
+            pub const fn txie(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "TX Interrupt enable"]
+            pub fn set_txie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "RX Interrupt enable"]
+            pub const fn rxie(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "RX Interrupt enable"]
+            pub fn set_rxie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Address match interrupt enable (slave only)"]
+            pub const fn addrie(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Address match interrupt enable (slave only)"]
+            pub fn set_addrie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Not acknowledge received interrupt enable"]
+            pub const fn nackie(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Not acknowledge received interrupt enable"]
+            pub fn set_nackie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "STOP detection Interrupt enable"]
+            pub const fn stopie(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "STOP detection Interrupt enable"]
+            pub fn set_stopie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Transfer Complete interrupt enable"]
+            pub const fn tcie(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transfer Complete interrupt enable"]
+            pub fn set_tcie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Error interrupts enable"]
+            pub const fn errie(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Error interrupts enable"]
+            pub fn set_errie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Digital noise filter"]
+            pub const fn dnf(&self) -> super::vals::Dnf {
+                let val = (self.0 >> 8usize) & 0x0f;
+                super::vals::Dnf(val as u8)
+            }
+            #[doc = "Digital noise filter"]
+            pub fn set_dnf(&mut self, val: super::vals::Dnf) {
+                self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize);
+            }
+            #[doc = "Analog noise filter OFF"]
+            pub const fn anfoff(&self) -> bool {
+                let val = (self.0 >> 12usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Analog noise filter OFF"]
+            pub fn set_anfoff(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
+            }
+            #[doc = "DMA transmission requests enable"]
+            pub const fn txdmaen(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DMA transmission requests enable"]
+            pub fn set_txdmaen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+            #[doc = "DMA reception requests enable"]
+            pub const fn rxdmaen(&self) -> bool {
+                let val = (self.0 >> 15usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DMA reception requests enable"]
+            pub fn set_rxdmaen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
+            }
+            #[doc = "Slave byte control"]
+            pub const fn sbc(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Slave byte control"]
+            pub fn set_sbc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
+            }
+            #[doc = "Clock stretching disable"]
+            pub const fn nostretch(&self) -> bool {
+                let val = (self.0 >> 17usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Clock stretching disable"]
+            pub fn set_nostretch(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
+            }
+            #[doc = "General call enable"]
+            pub const fn gcen(&self) -> bool {
+                let val = (self.0 >> 19usize) & 0x01;
+                val != 0
+            }
+            #[doc = "General call enable"]
+            pub fn set_gcen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize);
+            }
+            #[doc = "SMBus Host address enable"]
+            pub const fn smbhen(&self) -> bool {
+                let val = (self.0 >> 20usize) & 0x01;
+                val != 0
+            }
+            #[doc = "SMBus Host address enable"]
+            pub fn set_smbhen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
+            }
+            #[doc = "SMBus Device Default address enable"]
+            pub const fn smbden(&self) -> bool {
+                let val = (self.0 >> 21usize) & 0x01;
+                val != 0
+            }
+            #[doc = "SMBus Device Default address enable"]
+            pub fn set_smbden(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
+            }
+            #[doc = "SMBUS alert enable"]
+            pub const fn alerten(&self) -> bool {
+                let val = (self.0 >> 22usize) & 0x01;
+                val != 0
+            }
+            #[doc = "SMBUS alert enable"]
+            pub fn set_alerten(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
+            }
+            #[doc = "PEC enable"]
+            pub const fn pecen(&self) -> bool {
+                let val = (self.0 >> 23usize) & 0x01;
+                val != 0
+            }
+            #[doc = "PEC enable"]
+            pub fn set_pecen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
+            }
+        }
+        impl Default for Cr1 {
+            fn default() -> Cr1 {
+                Cr1(0)
+            }
+        }
+        #[doc = "PEC register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Pecr(pub u32);
+        impl Pecr {
+            #[doc = "Packet error checking register"]
+            pub const fn pec(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Packet error checking register"]
+            pub fn set_pec(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
+            }
+        }
+        impl Default for Pecr {
+            fn default() -> Pecr {
+                Pecr(0)
+            }
+        }
+        #[doc = "Interrupt clear register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Icr(pub u32);
+        impl Icr {
+            #[doc = "Address Matched flag clear"]
+            pub const fn addrcf(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Address Matched flag clear"]
+            pub fn set_addrcf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Not Acknowledge flag clear"]
+            pub const fn nackcf(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Not Acknowledge flag clear"]
+            pub fn set_nackcf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Stop detection flag clear"]
+            pub const fn stopcf(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Stop detection flag clear"]
+            pub fn set_stopcf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Bus error flag clear"]
+            pub const fn berrcf(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Bus error flag clear"]
+            pub fn set_berrcf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Arbitration lost flag clear"]
+            pub const fn arlocf(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Arbitration lost flag clear"]
+            pub fn set_arlocf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "Overrun/Underrun flag clear"]
+            pub const fn ovrcf(&self) -> bool {
+                let val = (self.0 >> 10usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Overrun/Underrun flag clear"]
+            pub fn set_ovrcf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            }
+            #[doc = "PEC Error flag clear"]
+            pub const fn peccf(&self) -> bool {
+                let val = (self.0 >> 11usize) & 0x01;
+                val != 0
+            }
+            #[doc = "PEC Error flag clear"]
+            pub fn set_peccf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
+            }
+            #[doc = "Timeout detection flag clear"]
+            pub const fn timoutcf(&self) -> bool {
+                let val = (self.0 >> 12usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Timeout detection flag clear"]
+            pub fn set_timoutcf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
+            }
+            #[doc = "Alert flag clear"]
+            pub const fn alertcf(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Alert flag clear"]
+            pub fn set_alertcf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+        }
+        impl Default for Icr {
+            fn default() -> Icr {
+                Icr(0)
+            }
+        }
+        #[doc = "Status register 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Timeoutr(pub u32);
+        impl Timeoutr {
+            #[doc = "Bus timeout A"]
+            pub const fn timeouta(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x0fff;
+                val as u16
+            }
+            #[doc = "Bus timeout A"]
+            pub fn set_timeouta(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
+            }
+            #[doc = "Idle clock timeout detection"]
+            pub const fn tidle(&self) -> bool {
+                let val = (self.0 >> 12usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Idle clock timeout detection"]
+            pub fn set_tidle(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
+            }
+            #[doc = "Clock timeout enable"]
+            pub const fn timouten(&self) -> bool {
+                let val = (self.0 >> 15usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Clock timeout enable"]
+            pub fn set_timouten(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
+            }
+            #[doc = "Bus timeout B"]
+            pub const fn timeoutb(&self) -> u16 {
+                let val = (self.0 >> 16usize) & 0x0fff;
+                val as u16
+            }
+            #[doc = "Bus timeout B"]
+            pub fn set_timeoutb(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize);
+            }
+            #[doc = "Extended clock timeout enable"]
+            pub const fn texten(&self) -> bool {
+                let val = (self.0 >> 31usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Extended clock timeout enable"]
+            pub fn set_texten(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
+            }
+        }
+        impl Default for Timeoutr {
+            fn default() -> Timeoutr {
+                Timeoutr(0)
+            }
+        }
+        #[doc = "Own address register 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Oar1(pub u32);
+        impl Oar1 {
+            #[doc = "Interface address"]
+            pub const fn oa1(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x03ff;
+                val as u16
+            }
+            #[doc = "Interface address"]
+            pub fn set_oa1(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x03ff << 0usize)) | (((val as u32) & 0x03ff) << 0usize);
+            }
+            #[doc = "Own Address 1 10-bit mode"]
+            pub const fn oa1mode(&self) -> super::vals::Oamode {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::Oamode(val as u8)
+            }
+            #[doc = "Own Address 1 10-bit mode"]
+            pub fn set_oa1mode(&mut self, val: super::vals::Oamode) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "Own Address 1 enable"]
+            pub const fn oa1en(&self) -> bool {
+                let val = (self.0 >> 15usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Own Address 1 enable"]
+            pub fn set_oa1en(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
+            }
+        }
+        impl Default for Oar1 {
+            fn default() -> Oar1 {
+                Oar1(0)
+            }
+        }
+        #[doc = "Own address register 2"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Oar2(pub u32);
+        impl Oar2 {
+            #[doc = "Interface address"]
+            pub const fn oa2(&self) -> u8 {
+                let val = (self.0 >> 1usize) & 0x7f;
+                val as u8
+            }
+            #[doc = "Interface address"]
+            pub fn set_oa2(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x7f << 1usize)) | (((val as u32) & 0x7f) << 1usize);
+            }
+            #[doc = "Own Address 2 masks"]
+            pub const fn oa2msk(&self) -> super::vals::Oamsk {
+                let val = (self.0 >> 8usize) & 0x07;
+                super::vals::Oamsk(val as u8)
+            }
+            #[doc = "Own Address 2 masks"]
+            pub fn set_oa2msk(&mut self, val: super::vals::Oamsk) {
+                self.0 = (self.0 & !(0x07 << 8usize)) | (((val.0 as u32) & 0x07) << 8usize);
+            }
+            #[doc = "Own Address 2 enable"]
+            pub const fn oa2en(&self) -> bool {
+                let val = (self.0 >> 15usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Own Address 2 enable"]
+            pub fn set_oa2en(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
+            }
+        }
+        impl Default for Oar2 {
+            fn default() -> Oar2 {
+                Oar2(0)
+            }
+        }
+        #[doc = "Timing register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Timingr(pub u32);
+        impl Timingr {
+            #[doc = "SCL low period (master mode)"]
+            pub const fn scll(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0xff;
+                val as u8
+            }
+            #[doc = "SCL low period (master mode)"]
+            pub fn set_scll(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
+            }
+            #[doc = "SCL high period (master mode)"]
+            pub const fn sclh(&self) -> u8 {
+                let val = (self.0 >> 8usize) & 0xff;
+                val as u8
+            }
+            #[doc = "SCL high period (master mode)"]
+            pub fn set_sclh(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize);
+            }
+            #[doc = "Data hold time"]
+            pub const fn sdadel(&self) -> u8 {
+                let val = (self.0 >> 16usize) & 0x0f;
+                val as u8
+            }
+            #[doc = "Data hold time"]
+            pub fn set_sdadel(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x0f << 16usize)) | (((val as u32) & 0x0f) << 16usize);
+            }
+            #[doc = "Data setup time"]
+            pub const fn scldel(&self) -> u8 {
+                let val = (self.0 >> 20usize) & 0x0f;
+                val as u8
+            }
+            #[doc = "Data setup time"]
+            pub fn set_scldel(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x0f << 20usize)) | (((val as u32) & 0x0f) << 20usize);
+            }
+            #[doc = "Timing prescaler"]
+            pub const fn presc(&self) -> u8 {
+                let val = (self.0 >> 28usize) & 0x0f;
+                val as u8
+            }
+            #[doc = "Timing prescaler"]
+            pub fn set_presc(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x0f << 28usize)) | (((val as u32) & 0x0f) << 28usize);
+            }
+        }
+        impl Default for Timingr {
+            fn default() -> Timingr {
+                Timingr(0)
+            }
+        }
+        #[doc = "Transmit data register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Txdr(pub u32);
+        impl Txdr {
+            #[doc = "8-bit transmit data"]
+            pub const fn txdata(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0xff;
+                val as u8
+            }
+            #[doc = "8-bit transmit data"]
+            pub fn set_txdata(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
+            }
+        }
+        impl Default for Txdr {
+            fn default() -> Txdr {
+                Txdr(0)
+            }
+        }
+        #[doc = "Interrupt and Status register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Isr(pub u32);
+        impl Isr {
+            #[doc = "Transmit data register empty (transmitters)"]
+            pub const fn txe(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transmit data register empty (transmitters)"]
+            pub fn set_txe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Transmit interrupt status (transmitters)"]
+            pub const fn txis(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transmit interrupt status (transmitters)"]
+            pub fn set_txis(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Receive data register not empty (receivers)"]
+            pub const fn rxne(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Receive data register not empty (receivers)"]
+            pub fn set_rxne(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Address matched (slave mode)"]
+            pub const fn addr(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Address matched (slave mode)"]
+            pub fn set_addr(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Not acknowledge received flag"]
+            pub const fn nackf(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Not acknowledge received flag"]
+            pub fn set_nackf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Stop detection flag"]
+            pub const fn stopf(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Stop detection flag"]
+            pub fn set_stopf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Transfer Complete (master mode)"]
+            pub const fn tc(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transfer Complete (master mode)"]
+            pub fn set_tc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Transfer Complete Reload"]
+            pub const fn tcr(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transfer Complete Reload"]
+            pub fn set_tcr(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Bus error"]
+            pub const fn berr(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Bus error"]
+            pub fn set_berr(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Arbitration lost"]
+            pub const fn arlo(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Arbitration lost"]
+            pub fn set_arlo(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "Overrun/Underrun (slave mode)"]
+            pub const fn ovr(&self) -> bool {
+                let val = (self.0 >> 10usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Overrun/Underrun (slave mode)"]
+            pub fn set_ovr(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            }
+            #[doc = "PEC Error in reception"]
+            pub const fn pecerr(&self) -> super::vals::Pecerr {
+                let val = (self.0 >> 11usize) & 0x01;
+                super::vals::Pecerr(val as u8)
+            }
+            #[doc = "PEC Error in reception"]
+            pub fn set_pecerr(&mut self, val: super::vals::Pecerr) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
+            }
+            #[doc = "Timeout or t_low detection flag"]
+            pub const fn timeout(&self) -> bool {
+                let val = (self.0 >> 12usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Timeout or t_low detection flag"]
+            pub fn set_timeout(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
+            }
+            #[doc = "SMBus alert"]
+            pub const fn alert(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "SMBus alert"]
+            pub fn set_alert(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+            #[doc = "Bus busy"]
+            pub const fn busy(&self) -> bool {
+                let val = (self.0 >> 15usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Bus busy"]
+            pub fn set_busy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
+            }
+            #[doc = "Transfer direction (Slave mode)"]
+            pub const fn dir(&self) -> super::vals::Dir {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Dir(val as u8)
+            }
+            #[doc = "Transfer direction (Slave mode)"]
+            pub fn set_dir(&mut self, val: super::vals::Dir) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "Address match code (Slave mode)"]
+            pub const fn addcode(&self) -> u8 {
+                let val = (self.0 >> 17usize) & 0x7f;
+                val as u8
+            }
+            #[doc = "Address match code (Slave mode)"]
+            pub fn set_addcode(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x7f << 17usize)) | (((val as u32) & 0x7f) << 17usize);
+            }
+        }
+        impl Default for Isr {
+            fn default() -> Isr {
+                Isr(0)
+            }
+        }
     }
     pub mod vals {
         use crate::generic::*;
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lck(pub u8);
-        impl Lck {
-            #[doc = "Port configuration not locked"]
-            pub const UNLOCKED: Self = Self(0);
-            #[doc = "Port configuration locked"]
-            pub const LOCKED: Self = Self(0x01);
+        pub struct Start(pub u8);
+        impl Start {
+            #[doc = "No Start generation"]
+            pub const NOSTART: Self = Self(0);
+            #[doc = "Restart/Start generation"]
+            pub const START: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lckk(pub u8);
-        impl Lckk {
-            #[doc = "Port configuration lock key not active"]
-            pub const NOTACTIVE: Self = Self(0);
-            #[doc = "Port configuration lock key active"]
-            pub const ACTIVE: Self = Self(0x01);
+        pub struct Nack(pub u8);
+        impl Nack {
+            #[doc = "an ACK is sent after current received byte"]
+            pub const ACK: Self = Self(0);
+            #[doc = "a NACK is sent after current received byte"]
+            pub const NACK: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Odr(pub u8);
-        impl Odr {
-            #[doc = "Set output to logic low"]
-            pub const LOW: Self = Self(0);
-            #[doc = "Set output to logic high"]
-            pub const HIGH: Self = Self(0x01);
+        pub struct Headr(pub u8);
+        impl Headr {
+            #[doc = "The master sends the complete 10 bit slave address read sequence"]
+            pub const COMPLETE: Self = Self(0);
+            #[doc = "The master only sends the 1st 7 bits of the 10 bit address, followed by Read direction"]
+            pub const PARTIAL: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Brw(pub u8);
-        impl Brw {
-            #[doc = "No action on the corresponding ODx bit"]
-            pub const NOACTION: Self = Self(0);
-            #[doc = "Reset the ODx bit"]
-            pub const RESET: Self = Self(0x01);
+        pub struct Oamsk(pub u8);
+        impl Oamsk {
+            #[doc = "No mask"]
+            pub const NOMASK: Self = Self(0);
+            #[doc = "OA2[1]
+is masked and don’t care. Only OA2[7:2]
+are compared"]
+            pub const MASK1: Self = Self(0x01);
+            #[doc = "OA2[2:1]
+are masked and don’t care. Only OA2[7:3]
+are compared"]
+            pub const MASK2: Self = Self(0x02);
+            #[doc = "OA2[3:1]
+are masked and don’t care. Only OA2[7:4]
+are compared"]
+            pub const MASK3: Self = Self(0x03);
+            #[doc = "OA2[4:1]
+are masked and don’t care. Only OA2[7:5]
+are compared"]
+            pub const MASK4: Self = Self(0x04);
+            #[doc = "OA2[5:1]
+are masked and don’t care. Only OA2[7:6]
+are compared"]
+            pub const MASK5: Self = Self(0x05);
+            #[doc = "OA2[6:1]
+are masked and don’t care. Only OA2[7]
+is compared."]
+            pub const MASK6: Self = Self(0x06);
+            #[doc = "OA2[7:1]
+are masked and don’t care. No comparison is done, and all (except reserved) 7-bit received addresses are acknowledged"]
+            pub const MASK7: Self = Self(0x07);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Bsw(pub u8);
-        impl Bsw {
-            #[doc = "No action on the corresponding ODx bit"]
-            pub const NOACTION: Self = Self(0);
-            #[doc = "Sets the corresponding ODRx bit"]
-            pub const SET: Self = Self(0x01);
+        pub struct Dnf(pub u8);
+        impl Dnf {
+            #[doc = "Digital filter disabled"]
+            pub const NOFILTER: Self = Self(0);
+            #[doc = "Digital filter enabled and filtering capability up to 1 tI2CCLK"]
+            pub const FILTER1: Self = Self(0x01);
+            #[doc = "Digital filter enabled and filtering capability up to 2 tI2CCLK"]
+            pub const FILTER2: Self = Self(0x02);
+            #[doc = "Digital filter enabled and filtering capability up to 3 tI2CCLK"]
+            pub const FILTER3: Self = Self(0x03);
+            #[doc = "Digital filter enabled and filtering capability up to 4 tI2CCLK"]
+            pub const FILTER4: Self = Self(0x04);
+            #[doc = "Digital filter enabled and filtering capability up to 5 tI2CCLK"]
+            pub const FILTER5: Self = Self(0x05);
+            #[doc = "Digital filter enabled and filtering capability up to 6 tI2CCLK"]
+            pub const FILTER6: Self = Self(0x06);
+            #[doc = "Digital filter enabled and filtering capability up to 7 tI2CCLK"]
+            pub const FILTER7: Self = Self(0x07);
+            #[doc = "Digital filter enabled and filtering capability up to 8 tI2CCLK"]
+            pub const FILTER8: Self = Self(0x08);
+            #[doc = "Digital filter enabled and filtering capability up to 9 tI2CCLK"]
+            pub const FILTER9: Self = Self(0x09);
+            #[doc = "Digital filter enabled and filtering capability up to 10 tI2CCLK"]
+            pub const FILTER10: Self = Self(0x0a);
+            #[doc = "Digital filter enabled and filtering capability up to 11 tI2CCLK"]
+            pub const FILTER11: Self = Self(0x0b);
+            #[doc = "Digital filter enabled and filtering capability up to 12 tI2CCLK"]
+            pub const FILTER12: Self = Self(0x0c);
+            #[doc = "Digital filter enabled and filtering capability up to 13 tI2CCLK"]
+            pub const FILTER13: Self = Self(0x0d);
+            #[doc = "Digital filter enabled and filtering capability up to 14 tI2CCLK"]
+            pub const FILTER14: Self = Self(0x0e);
+            #[doc = "Digital filter enabled and filtering capability up to 15 tI2CCLK"]
+            pub const FILTER15: Self = Self(0x0f);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Mode(pub u8);
-        impl Mode {
-            #[doc = "Input mode (reset state)"]
-            pub const INPUT: Self = Self(0);
-            #[doc = "Output mode 10 MHz"]
-            pub const OUTPUT: Self = Self(0x01);
-            #[doc = "Output mode 2 MHz"]
-            pub const OUTPUT2: Self = Self(0x02);
-            #[doc = "Output mode 50 MHz"]
-            pub const OUTPUT50: Self = Self(0x03);
+        pub struct Pecerr(pub u8);
+        impl Pecerr {
+            #[doc = "Received PEC does match with PEC register"]
+            pub const MATCH: Self = Self(0);
+            #[doc = "Received PEC does not match with PEC register"]
+            pub const NOMATCH: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Idr(pub u8);
-        impl Idr {
-            #[doc = "Input is logic low"]
-            pub const LOW: Self = Self(0);
-            #[doc = "Input is logic high"]
-            pub const HIGH: Self = Self(0x01);
+        pub struct Pecbyte(pub u8);
+        impl Pecbyte {
+            #[doc = "No PEC transfer"]
+            pub const NOPEC: Self = Self(0);
+            #[doc = "PEC transmission/reception is requested"]
+            pub const PEC: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Cnf(pub u8);
-        impl Cnf {
-            #[doc = "Analog mode / Push-Pull mode"]
-            pub const PUSHPULL: Self = Self(0);
-            #[doc = "Floating input (reset state) / Open Drain-Mode"]
-            pub const OPENDRAIN: Self = Self(0x01);
-            #[doc = "Input with pull-up/pull-down / Alternate Function Push-Pull Mode"]
-            pub const ALTPUSHPULL: Self = Self(0x02);
-            #[doc = "Alternate Function Open-Drain Mode"]
-            pub const ALTOPENDRAIN: Self = Self(0x03);
+        pub struct Autoend(pub u8);
+        impl Autoend {
+            #[doc = "Software end mode: TC flag is set when NBYTES data are transferred, stretching SCL low"]
+            pub const SOFTWARE: Self = Self(0);
+            #[doc = "Automatic end mode: a STOP condition is automatically sent when NBYTES data are transferred"]
+            pub const AUTOMATIC: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct RdWrn(pub u8);
+        impl RdWrn {
+            #[doc = "Master requests a write transfer"]
+            pub const WRITE: Self = Self(0);
+            #[doc = "Master requests a read transfer"]
+            pub const READ: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Stop(pub u8);
+        impl Stop {
+            #[doc = "No Stop generation"]
+            pub const NOSTOP: Self = Self(0);
+            #[doc = "Stop generation after current byte transfer"]
+            pub const STOP: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Add(pub u8);
+        impl Add {
+            #[doc = "The master operates in 7-bit addressing mode"]
+            pub const BIT7: Self = Self(0);
+            #[doc = "The master operates in 10-bit addressing mode"]
+            pub const BIT10: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Dir(pub u8);
+        impl Dir {
+            #[doc = "Write transfer, slave enters receiver mode"]
+            pub const WRITE: Self = Self(0);
+            #[doc = "Read transfer, slave enters transmitter mode"]
+            pub const READ: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Reload(pub u8);
+        impl Reload {
+            #[doc = "The transfer is completed after the NBYTES data transfer (STOP or RESTART will follow)"]
+            pub const COMPLETED: Self = Self(0);
+            #[doc = "The transfer is not completed after the NBYTES data transfer (NBYTES will be reloaded)"]
+            pub const NOTCOMPLETED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Oamode(pub u8);
+        impl Oamode {
+            #[doc = "Own address 1 is a 7-bit address"]
+            pub const BIT7: Self = Self(0);
+            #[doc = "Own address 1 is a 10-bit address"]
+            pub const BIT10: Self = Self(0x01);
         }
     }
 }
@@ -21883,6 +14449,878 @@ pub mod sdmmc_v2 {
     }
     pub mod regs {
         use crate::generic::*;
+        #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Resp2r(pub u32);
+        impl Resp2r {
+            #[doc = "see Table404."]
+            pub const fn cardstatus2(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
+            }
+            #[doc = "see Table404."]
+            pub fn set_cardstatus2(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            }
+        }
+        impl Default for Resp2r {
+            fn default() -> Resp2r {
+                Resp2r(0)
+            }
+        }
+        #[doc = "The SDMMC_ICR register is a write-only register. Writing a bit with 1 clears the corresponding bit in the SDMMC_STAR status register."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Icr(pub u32);
+        impl Icr {
+            #[doc = "CCRCFAIL flag clear bit Set by software to clear the CCRCFAIL flag."]
+            pub const fn ccrcfailc(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CCRCFAIL flag clear bit Set by software to clear the CCRCFAIL flag."]
+            pub fn set_ccrcfailc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "DCRCFAIL flag clear bit Set by software to clear the DCRCFAIL flag."]
+            pub const fn dcrcfailc(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DCRCFAIL flag clear bit Set by software to clear the DCRCFAIL flag."]
+            pub fn set_dcrcfailc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "CTIMEOUT flag clear bit Set by software to clear the CTIMEOUT flag."]
+            pub const fn ctimeoutc(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CTIMEOUT flag clear bit Set by software to clear the CTIMEOUT flag."]
+            pub fn set_ctimeoutc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "DTIMEOUT flag clear bit Set by software to clear the DTIMEOUT flag."]
+            pub const fn dtimeoutc(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DTIMEOUT flag clear bit Set by software to clear the DTIMEOUT flag."]
+            pub fn set_dtimeoutc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "TXUNDERR flag clear bit Set by software to clear TXUNDERR flag."]
+            pub const fn txunderrc(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "TXUNDERR flag clear bit Set by software to clear TXUNDERR flag."]
+            pub fn set_txunderrc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "RXOVERR flag clear bit Set by software to clear the RXOVERR flag."]
+            pub const fn rxoverrc(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "RXOVERR flag clear bit Set by software to clear the RXOVERR flag."]
+            pub fn set_rxoverrc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "CMDREND flag clear bit Set by software to clear the CMDREND flag."]
+            pub const fn cmdrendc(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CMDREND flag clear bit Set by software to clear the CMDREND flag."]
+            pub fn set_cmdrendc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "CMDSENT flag clear bit Set by software to clear the CMDSENT flag."]
+            pub const fn cmdsentc(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CMDSENT flag clear bit Set by software to clear the CMDSENT flag."]
+            pub fn set_cmdsentc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "DATAEND flag clear bit Set by software to clear the DATAEND flag."]
+            pub const fn dataendc(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DATAEND flag clear bit Set by software to clear the DATAEND flag."]
+            pub fn set_dataendc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "DHOLD flag clear bit Set by software to clear the DHOLD flag."]
+            pub const fn dholdc(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DHOLD flag clear bit Set by software to clear the DHOLD flag."]
+            pub fn set_dholdc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "DBCKEND flag clear bit Set by software to clear the DBCKEND flag."]
+            pub const fn dbckendc(&self) -> bool {
+                let val = (self.0 >> 10usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DBCKEND flag clear bit Set by software to clear the DBCKEND flag."]
+            pub fn set_dbckendc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            }
+            #[doc = "DABORT flag clear bit Set by software to clear the DABORT flag."]
+            pub const fn dabortc(&self) -> bool {
+                let val = (self.0 >> 11usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DABORT flag clear bit Set by software to clear the DABORT flag."]
+            pub fn set_dabortc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
+            }
+            #[doc = "BUSYD0END flag clear bit Set by software to clear the BUSYD0END flag."]
+            pub const fn busyd0endc(&self) -> bool {
+                let val = (self.0 >> 21usize) & 0x01;
+                val != 0
+            }
+            #[doc = "BUSYD0END flag clear bit Set by software to clear the BUSYD0END flag."]
+            pub fn set_busyd0endc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
+            }
+            #[doc = "SDIOIT flag clear bit Set by software to clear the SDIOIT flag."]
+            pub const fn sdioitc(&self) -> bool {
+                let val = (self.0 >> 22usize) & 0x01;
+                val != 0
+            }
+            #[doc = "SDIOIT flag clear bit Set by software to clear the SDIOIT flag."]
+            pub fn set_sdioitc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
+            }
+            #[doc = "ACKFAIL flag clear bit Set by software to clear the ACKFAIL flag."]
+            pub const fn ackfailc(&self) -> bool {
+                let val = (self.0 >> 23usize) & 0x01;
+                val != 0
+            }
+            #[doc = "ACKFAIL flag clear bit Set by software to clear the ACKFAIL flag."]
+            pub fn set_ackfailc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
+            }
+            #[doc = "ACKTIMEOUT flag clear bit Set by software to clear the ACKTIMEOUT flag."]
+            pub const fn acktimeoutc(&self) -> bool {
+                let val = (self.0 >> 24usize) & 0x01;
+                val != 0
+            }
+            #[doc = "ACKTIMEOUT flag clear bit Set by software to clear the ACKTIMEOUT flag."]
+            pub fn set_acktimeoutc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize);
+            }
+            #[doc = "VSWEND flag clear bit Set by software to clear the VSWEND flag."]
+            pub const fn vswendc(&self) -> bool {
+                let val = (self.0 >> 25usize) & 0x01;
+                val != 0
+            }
+            #[doc = "VSWEND flag clear bit Set by software to clear the VSWEND flag."]
+            pub fn set_vswendc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize);
+            }
+            #[doc = "CKSTOP flag clear bit Set by software to clear the CKSTOP flag."]
+            pub const fn ckstopc(&self) -> bool {
+                let val = (self.0 >> 26usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CKSTOP flag clear bit Set by software to clear the CKSTOP flag."]
+            pub fn set_ckstopc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
+            }
+            #[doc = "IDMA transfer error clear bit Set by software to clear the IDMATE flag."]
+            pub const fn idmatec(&self) -> bool {
+                let val = (self.0 >> 27usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IDMA transfer error clear bit Set by software to clear the IDMATE flag."]
+            pub fn set_idmatec(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize);
+            }
+            #[doc = "IDMA buffer transfer complete clear bit Set by software to clear the IDMABTC flag."]
+            pub const fn idmabtcc(&self) -> bool {
+                let val = (self.0 >> 28usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IDMA buffer transfer complete clear bit Set by software to clear the IDMABTC flag."]
+            pub fn set_idmabtcc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize);
+            }
+        }
+        impl Default for Icr {
+            fn default() -> Icr {
+                Icr(0)
+            }
+        }
+        #[doc = "The receive and transmit FIFOs can be read or written as 32-bit wide registers. The FIFOs contain 32 entries on 32 sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Idmactrlr(pub u32);
+        impl Idmactrlr {
+            #[doc = "IDMA enable This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
+            pub const fn idmaen(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IDMA enable This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
+            pub fn set_idmaen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Buffer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
+            pub const fn idmabmode(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Buffer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
+            pub fn set_idmabmode(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Double buffer mode active buffer indication This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). When IDMA is enabled this bit is toggled by hardware."]
+            pub const fn idmabact(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Double buffer mode active buffer indication This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). When IDMA is enabled this bit is toggled by hardware."]
+            pub fn set_idmabact(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+        }
+        impl Default for Idmactrlr {
+            fn default() -> Idmactrlr {
+                Idmactrlr(0)
+            }
+        }
+        #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Resp3r(pub u32);
+        impl Resp3r {
+            #[doc = "see Table404."]
+            pub const fn cardstatus3(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
+            }
+            #[doc = "see Table404."]
+            pub fn set_cardstatus3(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            }
+        }
+        impl Default for Resp3r {
+            fn default() -> Resp3r {
+                Resp3r(0)
+            }
+        }
+        #[doc = "The SDMMC_DTIMER register contains the data timeout period, in card bus clock periods. A counter loads the value from the SDMMC_DTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_R or Busy state. If the timer reaches 0 while the DPSM is in either of these states, the timeout status flag is set."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Dtimer(pub u32);
+        impl Dtimer {
+            #[doc = "Data and R1b busy timeout period This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). Data and R1b busy timeout period expressed in card bus clock periods."]
+            pub const fn datatime(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
+            }
+            #[doc = "Data and R1b busy timeout period This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). Data and R1b busy timeout period expressed in card bus clock periods."]
+            pub fn set_datatime(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            }
+        }
+        impl Default for Dtimer {
+            fn default() -> Dtimer {
+                Dtimer(0)
+            }
+        }
+        #[doc = "SDMMC power control register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Power(pub u32);
+        impl Power {
+            #[doc = "SDMMC state control bits. These bits can only be written when the SDMMC is not in the power-on state (PWRCTRL?11). These bits are used to define the functional state of the SDMMC signals: Any further write will be ignored, PWRCTRL value will keep 11."]
+            pub const fn pwrctrl(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0x03;
+                val as u8
+            }
+            #[doc = "SDMMC state control bits. These bits can only be written when the SDMMC is not in the power-on state (PWRCTRL?11). These bits are used to define the functional state of the SDMMC signals: Any further write will be ignored, PWRCTRL value will keep 11."]
+            pub fn set_pwrctrl(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 0usize)) | (((val as u32) & 0x03) << 0usize);
+            }
+            #[doc = "Voltage switch sequence start. This bit is used to start the timing critical section of the voltage switch sequence:"]
+            pub const fn vswitch(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Voltage switch sequence start. This bit is used to start the timing critical section of the voltage switch sequence:"]
+            pub fn set_vswitch(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Voltage switch procedure enable. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). This bit is used to stop the SDMMC_CK after the voltage switch command response:"]
+            pub const fn vswitchen(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Voltage switch procedure enable. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). This bit is used to stop the SDMMC_CK after the voltage switch command response:"]
+            pub fn set_vswitchen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Data and command direction signals polarity selection. This bit can only be written when the SDMMC is in the power-off state (PWRCTRL = 00)."]
+            pub const fn dirpol(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Data and command direction signals polarity selection. This bit can only be written when the SDMMC is in the power-off state (PWRCTRL = 00)."]
+            pub fn set_dirpol(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+        }
+        impl Default for Power {
+            fn default() -> Power {
+                Power(0)
+            }
+        }
+        #[doc = "The SDMMC_ARGR register contains a 32-bit command argument, which is sent to a card as part of a command message."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Argr(pub u32);
+        impl Argr {
+            #[doc = "Command argument. These bits can only be written by firmware when CPSM is disabled (CPSMEN = 0). Command argument sent to a card as part of a command message. If a command contains an argument, it must be loaded into this register before writing a command to the command register."]
+            pub const fn cmdarg(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
+            }
+            #[doc = "Command argument. These bits can only be written by firmware when CPSM is disabled (CPSMEN = 0). Command argument sent to a card as part of a command message. If a command contains an argument, it must be loaded into this register before writing a command to the command register."]
+            pub fn set_cmdarg(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            }
+        }
+        impl Default for Argr {
+            fn default() -> Argr {
+                Argr(0)
+            }
+        }
+        #[doc = "The SDMMC_DCNTR register loads the value from the data length register (see SDMMC_DLENR) when the DPSM moves from the Idle state to the Wait_R or Wait_S state. As data is transferred, the counter decrements the value until it reaches 0. The DPSM then moves to the Idle state and when there has been no error, the data status end flag (DATAEND) is set."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Dcntr(pub u32);
+        impl Dcntr {
+            #[doc = "Data count value When read, the number of remaining data bytes to be transferred is returned. Write has no effect."]
+            pub const fn datacount(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0x01ff_ffff;
+                val as u32
+            }
+            #[doc = "Data count value When read, the number of remaining data bytes to be transferred is returned. Write has no effect."]
+            pub fn set_datacount(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0x01ff_ffff << 0usize)) | (((val as u32) & 0x01ff_ffff) << 0usize);
+            }
+        }
+        impl Default for Dcntr {
+            fn default() -> Dcntr {
+                Dcntr(0)
+            }
+        }
+        #[doc = "The SDMMC_DCTRL register control the data path state machine (DPSM)."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Dctrl(pub u32);
+        impl Dctrl {
+            #[doc = "Data transfer enable bit This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). This bit is cleared by Hardware when data transfer completes. This bit shall only be used to transfer data when no associated data transfer command is used, i.e. shall not be used with SD or eMMC cards."]
+            pub const fn dten(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Data transfer enable bit This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). This bit is cleared by Hardware when data transfer completes. This bit shall only be used to transfer data when no associated data transfer command is used, i.e. shall not be used with SD or eMMC cards."]
+            pub fn set_dten(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Data transfer direction selection This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
+            pub const fn dtdir(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Data transfer direction selection This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
+            pub fn set_dtdir(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Data transfer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
+            pub const fn dtmode(&self) -> u8 {
+                let val = (self.0 >> 2usize) & 0x03;
+                val as u8
+            }
+            #[doc = "Data transfer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
+            pub fn set_dtmode(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 2usize)) | (((val as u32) & 0x03) << 2usize);
+            }
+            #[doc = "Data block size This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). Define the data block length when the block data transfer mode is selected: When DATALENGTH is not a multiple of DBLOCKSIZE, the transfered data is truncated at a multiple of DBLOCKSIZE. (Any remain data will not be transfered.) When DDR = 1, DBLOCKSIZE = 0000 shall not be used. (No data will be transfered)"]
+            pub const fn dblocksize(&self) -> u8 {
+                let val = (self.0 >> 4usize) & 0x0f;
+                val as u8
+            }
+            #[doc = "Data block size This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). Define the data block length when the block data transfer mode is selected: When DATALENGTH is not a multiple of DBLOCKSIZE, the transfered data is truncated at a multiple of DBLOCKSIZE. (Any remain data will not be transfered.) When DDR = 1, DBLOCKSIZE = 0000 shall not be used. (No data will be transfered)"]
+            pub fn set_dblocksize(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize);
+            }
+            #[doc = "Read wait start. If this bit is set, read wait operation starts."]
+            pub const fn rwstart(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Read wait start. If this bit is set, read wait operation starts."]
+            pub fn set_rwstart(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Read wait stop This bit is written by firmware and auto cleared by hardware when the DPSM moves from the READ_WAIT state to the WAIT_R or IDLE state."]
+            pub const fn rwstop(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Read wait stop This bit is written by firmware and auto cleared by hardware when the DPSM moves from the READ_WAIT state to the WAIT_R or IDLE state."]
+            pub fn set_rwstop(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "Read wait mode. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
+            pub const fn rwmod(&self) -> bool {
+                let val = (self.0 >> 10usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Read wait mode. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
+            pub fn set_rwmod(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            }
+            #[doc = "SD I/O interrupt enable functions This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). If this bit is set, the DPSM enables the SD I/O card specific interrupt operation."]
+            pub const fn sdioen(&self) -> bool {
+                let val = (self.0 >> 11usize) & 0x01;
+                val != 0
+            }
+            #[doc = "SD I/O interrupt enable functions This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). If this bit is set, the DPSM enables the SD I/O card specific interrupt operation."]
+            pub fn set_sdioen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
+            }
+            #[doc = "Enable the reception of the boot acknowledgment. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
+            pub const fn bootacken(&self) -> bool {
+                let val = (self.0 >> 12usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Enable the reception of the boot acknowledgment. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
+            pub fn set_bootacken(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
+            }
+            #[doc = "FIFO reset, will flush any remaining data. This bit can only be written by firmware when IDMAEN= 0 and DPSM is active (DPSMACT = 1). This bit will only take effect when a transfer error or transfer hold occurs."]
+            pub const fn fiforst(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "FIFO reset, will flush any remaining data. This bit can only be written by firmware when IDMAEN= 0 and DPSM is active (DPSMACT = 1). This bit will only take effect when a transfer error or transfer hold occurs."]
+            pub fn set_fiforst(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+        }
+        impl Default for Dctrl {
+            fn default() -> Dctrl {
+                Dctrl(0)
+            }
+        }
+        #[doc = "The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO.When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Fifor(pub u32);
+        impl Fifor {
+            #[doc = "Receive and transmit FIFO data This register can only be read or written by firmware when the DPSM is active (DPSMACT=1). The FIFO data occupies 16 entries of 32-bit words."]
+            pub const fn fifodata(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
+            }
+            #[doc = "Receive and transmit FIFO data This register can only be read or written by firmware when the DPSM is active (DPSMACT=1). The FIFO data occupies 16 entries of 32-bit words."]
+            pub fn set_fifodata(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            }
+        }
+        impl Default for Fifor {
+            fn default() -> Fifor {
+                Fifor(0)
+            }
+        }
+        #[doc = "The interrupt mask register determines which status flags generate an interrupt request by setting the corresponding bit to 1."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Maskr(pub u32);
+        impl Maskr {
+            #[doc = "Command CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by command CRC failure."]
+            pub const fn ccrcfailie(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Command CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by command CRC failure."]
+            pub fn set_ccrcfailie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Data CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by data CRC failure."]
+            pub const fn dcrcfailie(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Data CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by data CRC failure."]
+            pub fn set_dcrcfailie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Command timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by command timeout."]
+            pub const fn ctimeoutie(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Command timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by command timeout."]
+            pub fn set_ctimeoutie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Data timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by data timeout."]
+            pub const fn dtimeoutie(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Data timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by data timeout."]
+            pub fn set_dtimeoutie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Tx FIFO underrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO underrun error."]
+            pub const fn txunderrie(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Tx FIFO underrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO underrun error."]
+            pub fn set_txunderrie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Rx FIFO overrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO overrun error."]
+            pub const fn rxoverrie(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Rx FIFO overrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO overrun error."]
+            pub fn set_rxoverrie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Command response received interrupt enable Set and cleared by software to enable/disable interrupt caused by receiving command response."]
+            pub const fn cmdrendie(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Command response received interrupt enable Set and cleared by software to enable/disable interrupt caused by receiving command response."]
+            pub fn set_cmdrendie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Command sent interrupt enable Set and cleared by software to enable/disable interrupt caused by sending command."]
+            pub const fn cmdsentie(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Command sent interrupt enable Set and cleared by software to enable/disable interrupt caused by sending command."]
+            pub fn set_cmdsentie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Data end interrupt enable Set and cleared by software to enable/disable interrupt caused by data end."]
+            pub const fn dataendie(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Data end interrupt enable Set and cleared by software to enable/disable interrupt caused by data end."]
+            pub fn set_dataendie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Data hold interrupt enable Set and cleared by software to enable/disable the interrupt generated when sending new data is hold in the DPSM Wait_S state."]
+            pub const fn dholdie(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Data hold interrupt enable Set and cleared by software to enable/disable the interrupt generated when sending new data is hold in the DPSM Wait_S state."]
+            pub fn set_dholdie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "Data block end interrupt enable Set and cleared by software to enable/disable interrupt caused by data block end."]
+            pub const fn dbckendie(&self) -> bool {
+                let val = (self.0 >> 10usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Data block end interrupt enable Set and cleared by software to enable/disable interrupt caused by data block end."]
+            pub fn set_dbckendie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            }
+            #[doc = "Data transfer aborted interrupt enable Set and cleared by software to enable/disable interrupt caused by a data transfer being aborted."]
+            pub const fn dabortie(&self) -> bool {
+                let val = (self.0 >> 11usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Data transfer aborted interrupt enable Set and cleared by software to enable/disable interrupt caused by a data transfer being aborted."]
+            pub fn set_dabortie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
+            }
+            #[doc = "Tx FIFO half empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO half empty."]
+            pub const fn txfifoheie(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Tx FIFO half empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO half empty."]
+            pub fn set_txfifoheie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+            #[doc = "Rx FIFO half full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO half full."]
+            pub const fn rxfifohfie(&self) -> bool {
+                let val = (self.0 >> 15usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Rx FIFO half full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO half full."]
+            pub fn set_rxfifohfie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
+            }
+            #[doc = "Rx FIFO full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO full."]
+            pub const fn rxfifofie(&self) -> bool {
+                let val = (self.0 >> 17usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Rx FIFO full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO full."]
+            pub fn set_rxfifofie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
+            }
+            #[doc = "Tx FIFO empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO empty."]
+            pub const fn txfifoeie(&self) -> bool {
+                let val = (self.0 >> 18usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Tx FIFO empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO empty."]
+            pub fn set_txfifoeie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize);
+            }
+            #[doc = "BUSYD0END interrupt enable Set and cleared by software to enable/disable the interrupt generated when SDMMC_D0 signal changes from busy to NOT busy following a CMD response."]
+            pub const fn busyd0endie(&self) -> bool {
+                let val = (self.0 >> 21usize) & 0x01;
+                val != 0
+            }
+            #[doc = "BUSYD0END interrupt enable Set and cleared by software to enable/disable the interrupt generated when SDMMC_D0 signal changes from busy to NOT busy following a CMD response."]
+            pub fn set_busyd0endie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
+            }
+            #[doc = "SDIO mode interrupt received interrupt enable Set and cleared by software to enable/disable the interrupt generated when receiving the SDIO mode interrupt."]
+            pub const fn sdioitie(&self) -> bool {
+                let val = (self.0 >> 22usize) & 0x01;
+                val != 0
+            }
+            #[doc = "SDIO mode interrupt received interrupt enable Set and cleared by software to enable/disable the interrupt generated when receiving the SDIO mode interrupt."]
+            pub fn set_sdioitie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
+            }
+            #[doc = "Acknowledgment Fail interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment Fail."]
+            pub const fn ackfailie(&self) -> bool {
+                let val = (self.0 >> 23usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Acknowledgment Fail interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment Fail."]
+            pub fn set_ackfailie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
+            }
+            #[doc = "Acknowledgment timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment timeout."]
+            pub const fn acktimeoutie(&self) -> bool {
+                let val = (self.0 >> 24usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Acknowledgment timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment timeout."]
+            pub fn set_acktimeoutie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize);
+            }
+            #[doc = "Voltage switch critical timing section completion interrupt enable Set and cleared by software to enable/disable the interrupt generated when voltage switch critical timing section completion."]
+            pub const fn vswendie(&self) -> bool {
+                let val = (self.0 >> 25usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Voltage switch critical timing section completion interrupt enable Set and cleared by software to enable/disable the interrupt generated when voltage switch critical timing section completion."]
+            pub fn set_vswendie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize);
+            }
+            #[doc = "Voltage Switch clock stopped interrupt enable Set and cleared by software to enable/disable interrupt caused by Voltage Switch clock stopped."]
+            pub const fn ckstopie(&self) -> bool {
+                let val = (self.0 >> 26usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Voltage Switch clock stopped interrupt enable Set and cleared by software to enable/disable interrupt caused by Voltage Switch clock stopped."]
+            pub fn set_ckstopie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
+            }
+            #[doc = "IDMA buffer transfer complete interrupt enable Set and cleared by software to enable/disable the interrupt generated when the IDMA has transferred all data belonging to a memory buffer."]
+            pub const fn idmabtcie(&self) -> bool {
+                let val = (self.0 >> 28usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IDMA buffer transfer complete interrupt enable Set and cleared by software to enable/disable the interrupt generated when the IDMA has transferred all data belonging to a memory buffer."]
+            pub fn set_idmabtcie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize);
+            }
+        }
+        impl Default for Maskr {
+            fn default() -> Maskr {
+                Maskr(0)
+            }
+        }
+        #[doc = "The SDMMC_CMDR register contains the command index and command type bits. The command index is sent to a card as part of a command message. The command type bits control the command path state machine (CPSM)."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cmdr(pub u32);
+        impl Cmdr {
+            #[doc = "Command index. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). The command index is sent to the card as part of a command message."]
+            pub const fn cmdindex(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0x3f;
+                val as u8
+            }
+            #[doc = "Command index. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). The command index is sent to the card as part of a command message."]
+            pub fn set_cmdindex(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x3f << 0usize)) | (((val as u32) & 0x3f) << 0usize);
+            }
+            #[doc = "The CPSM treats the command as a data transfer command, stops the interrupt period, and signals DataEnable to the DPSM This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues an end of interrupt period and issues DataEnable signal to the DPSM when the command is sent."]
+            pub const fn cmdtrans(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "The CPSM treats the command as a data transfer command, stops the interrupt period, and signals DataEnable to the DPSM This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues an end of interrupt period and issues DataEnable signal to the DPSM when the command is sent."]
+            pub fn set_cmdtrans(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "The CPSM treats the command as a Stop Transmission command and signals Abort to the DPSM. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues the Abort signal to the DPSM when the command is sent."]
+            pub const fn cmdstop(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "The CPSM treats the command as a Stop Transmission command and signals Abort to the DPSM. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues the Abort signal to the DPSM when the command is sent."]
+            pub fn set_cmdstop(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Wait for response bits. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). They are used to configure whether the CPSM is to wait for a response, and if yes, which kind of response."]
+            pub const fn waitresp(&self) -> u8 {
+                let val = (self.0 >> 8usize) & 0x03;
+                val as u8
+            }
+            #[doc = "Wait for response bits. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). They are used to configure whether the CPSM is to wait for a response, and if yes, which kind of response."]
+            pub fn set_waitresp(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 8usize)) | (((val as u32) & 0x03) << 8usize);
+            }
+            #[doc = "CPSM waits for interrupt request. If this bit is set, the CPSM disables command timeout and waits for an card interrupt request (Response). If this bit is cleared in the CPSM Wait state, will cause the abort of the interrupt mode."]
+            pub const fn waitint(&self) -> bool {
+                let val = (self.0 >> 10usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CPSM waits for interrupt request. If this bit is set, the CPSM disables command timeout and waits for an card interrupt request (Response). If this bit is cleared in the CPSM Wait state, will cause the abort of the interrupt mode."]
+            pub fn set_waitint(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            }
+            #[doc = "CPSM Waits for end of data transfer (CmdPend internal signal) from DPSM. This bit when set, the CPSM waits for the end of data transfer trigger before it starts sending a command. WAITPEND is only taken into account when DTMODE = MMC stream data transfer, WIDBUS = 1-bit wide bus mode, DPSMACT = 1 and DTDIR = from host to card."]
+            pub const fn waitpend(&self) -> bool {
+                let val = (self.0 >> 11usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CPSM Waits for end of data transfer (CmdPend internal signal) from DPSM. This bit when set, the CPSM waits for the end of data transfer trigger before it starts sending a command. WAITPEND is only taken into account when DTMODE = MMC stream data transfer, WIDBUS = 1-bit wide bus mode, DPSMACT = 1 and DTDIR = from host to card."]
+            pub fn set_waitpend(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
+            }
+            #[doc = "Command path state machine (CPSM) Enable bit This bit is written 1 by firmware, and cleared by hardware when the CPSM enters the Idle state. If this bit is set, the CPSM is enabled. When DTEN = 1, no command will be transfered nor boot procedure will be started. CPSMEN is cleared to 0."]
+            pub const fn cpsmen(&self) -> bool {
+                let val = (self.0 >> 12usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Command path state machine (CPSM) Enable bit This bit is written 1 by firmware, and cleared by hardware when the CPSM enters the Idle state. If this bit is set, the CPSM is enabled. When DTEN = 1, no command will be transfered nor boot procedure will be started. CPSMEN is cleared to 0."]
+            pub fn set_cpsmen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
+            }
+            #[doc = "Hold new data block transmission and reception in the DPSM. If this bit is set, the DPSM will not move from the Wait_S state to the Send state or from the Wait_R state to the Receive state."]
+            pub const fn dthold(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Hold new data block transmission and reception in the DPSM. If this bit is set, the DPSM will not move from the Wait_S state to the Send state or from the Wait_R state to the Receive state."]
+            pub fn set_dthold(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+            #[doc = "Select the boot mode procedure to be used. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0)"]
+            pub const fn bootmode(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Select the boot mode procedure to be used. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0)"]
+            pub fn set_bootmode(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+            #[doc = "Enable boot mode procedure."]
+            pub const fn booten(&self) -> bool {
+                let val = (self.0 >> 15usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Enable boot mode procedure."]
+            pub fn set_booten(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
+            }
+            #[doc = "The CPSM treats the command as a Suspend or Resume command and signals interrupt period start/end. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). CMDSUSPEND = 1 and CMDTRANS = 0 Suspend command, start interrupt period when response bit BS=0. CMDSUSPEND = 1 and CMDTRANS = 1 Resume command with data, end interrupt period when response bit DF=1."]
+            pub const fn cmdsuspend(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
+            }
+            #[doc = "The CPSM treats the command as a Suspend or Resume command and signals interrupt period start/end. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). CMDSUSPEND = 1 and CMDTRANS = 0 Suspend command, start interrupt period when response bit BS=0. CMDSUSPEND = 1 and CMDTRANS = 1 Resume command with data, end interrupt period when response bit DF=1."]
+            pub fn set_cmdsuspend(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
+            }
+        }
+        impl Default for Cmdr {
+            fn default() -> Cmdr {
+                Cmdr(0)
+            }
+        }
+        #[doc = "The SDMMC_IDMABSIZER register contains the buffers size when in double buffer configuration."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Idmabsizer(pub u32);
+        impl Idmabsizer {
+            #[doc = "Number of transfers per buffer. This 8-bit value shall be multiplied by 8 to get the size of the buffer in 32-bit words and by 32 to get the size of the buffer in bytes. Example: IDMABNDT = 0x01: buffer size = 8 words = 32 bytes. These bits can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
+            pub const fn idmabndt(&self) -> u8 {
+                let val = (self.0 >> 5usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Number of transfers per buffer. This 8-bit value shall be multiplied by 8 to get the size of the buffer in 32-bit words and by 32 to get the size of the buffer in bytes. Example: IDMABNDT = 0x01: buffer size = 8 words = 32 bytes. These bits can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
+            pub fn set_idmabndt(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 5usize)) | (((val as u32) & 0xff) << 5usize);
+            }
+        }
+        impl Default for Idmabsizer {
+            fn default() -> Idmabsizer {
+                Idmabsizer(0)
+            }
+        }
+        #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Resp1r(pub u32);
+        impl Resp1r {
+            #[doc = "see Table 432"]
+            pub const fn cardstatus1(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
+            }
+            #[doc = "see Table 432"]
+            pub fn set_cardstatus1(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            }
+        }
+        impl Default for Resp1r {
+            fn default() -> Resp1r {
+                Resp1r(0)
+            }
+        }
         #[doc = "The SDMMC_STAR register is a read-only register. It contains two types of flag:Static flags (bits [29,21,11:0]): these bits remain asserted until they are cleared by writing to the SDMMC interrupt Clear register (see SDMMC_ICR)Dynamic flags (bits [20:12]): these bits change state depending on the state of the underlying logic (for example, FIFO full and empty flags are asserted and de-asserted as data while written to the FIFO)"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -22155,6 +15593,79 @@ pub mod sdmmc_v2 {
                 Star(0)
             }
         }
+        #[doc = "The SDMMC_IDMABASE0R register contains the memory buffer base address in single buffer configuration and the buffer 0 base address in double buffer configuration."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Idmabase0r(pub u32);
+        impl Idmabase0r {
+            #[doc = "Buffer 0 memory base address bits [31:2], shall be word aligned (bit [1:0]
+are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 0 is inactive (IDMABACT = 1)."]
+            pub const fn idmabase0(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
+            }
+            #[doc = "Buffer 0 memory base address bits [31:2], shall be word aligned (bit [1:0]
+are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 0 is inactive (IDMABACT = 1)."]
+            pub fn set_idmabase0(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            }
+        }
+        impl Default for Idmabase0r {
+            fn default() -> Idmabase0r {
+                Idmabase0r(0)
+            }
+        }
+        #[doc = "SDMMC IP version register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ver(pub u32);
+        impl Ver {
+            #[doc = "IP minor revision number."]
+            pub const fn minrev(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0x0f;
+                val as u8
+            }
+            #[doc = "IP minor revision number."]
+            pub fn set_minrev(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize);
+            }
+            #[doc = "IP major revision number."]
+            pub const fn majrev(&self) -> u8 {
+                let val = (self.0 >> 4usize) & 0x0f;
+                val as u8
+            }
+            #[doc = "IP major revision number."]
+            pub fn set_majrev(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize);
+            }
+        }
+        impl Default for Ver {
+            fn default() -> Ver {
+                Ver(0)
+            }
+        }
+        #[doc = "The SDMMC_ACKTIMER register contains the acknowledgment timeout period, in SDMMC_CK bus clock periods. A counter loads the value from the SDMMC_ACKTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_Ack state. If the timer reaches 0 while the DPSM is in this states, the acknowledgment timeout status flag is set."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Acktimer(pub u32);
+        impl Acktimer {
+            #[doc = "Boot acknowledgment timeout period This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). Boot acknowledgment timeout period expressed in card bus clock periods."]
+            pub const fn acktime(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0x01ff_ffff;
+                val as u32
+            }
+            #[doc = "Boot acknowledgment timeout period This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). Boot acknowledgment timeout period expressed in card bus clock periods."]
+            pub fn set_acktime(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0x01ff_ffff << 0usize)) | (((val as u32) & 0x01ff_ffff) << 0usize);
+            }
+        }
+        impl Default for Acktimer {
+            fn default() -> Acktimer {
+                Acktimer(0)
+            }
+        }
         #[doc = "SDMMC IP identification register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -22176,87 +15687,47 @@ pub mod sdmmc_v2 {
                 Id(0)
             }
         }
-        #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."]
+        #[doc = "The SDMMC_IDMABASE1R register contains the double buffer configuration second buffer memory base address."]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Resp2r(pub u32);
-        impl Resp2r {
-            #[doc = "see Table404."]
-            pub const fn cardstatus2(&self) -> u32 {
+        pub struct Idmabase1r(pub u32);
+        impl Idmabase1r {
+            #[doc = "Buffer 1 memory base address, shall be word aligned (bit [1:0]
+are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 1 is inactive (IDMABACT = 0)."]
+            pub const fn idmabase1(&self) -> u32 {
                 let val = (self.0 >> 0usize) & 0xffff_ffff;
                 val as u32
             }
-            #[doc = "see Table404."]
-            pub fn set_cardstatus2(&mut self, val: u32) {
+            #[doc = "Buffer 1 memory base address, shall be word aligned (bit [1:0]
+are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 1 is inactive (IDMABACT = 0)."]
+            pub fn set_idmabase1(&mut self, val: u32) {
                 self.0 =
                     (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
             }
         }
-        impl Default for Resp2r {
-            fn default() -> Resp2r {
-                Resp2r(0)
+        impl Default for Idmabase1r {
+            fn default() -> Idmabase1r {
+                Idmabase1r(0)
             }
         }
-        #[doc = "The SDMMC_IDMABSIZER register contains the buffers size when in double buffer configuration."]
+        #[doc = "SDMMC command response register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Idmabsizer(pub u32);
-        impl Idmabsizer {
-            #[doc = "Number of transfers per buffer. This 8-bit value shall be multiplied by 8 to get the size of the buffer in 32-bit words and by 32 to get the size of the buffer in bytes. Example: IDMABNDT = 0x01: buffer size = 8 words = 32 bytes. These bits can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
-            pub const fn idmabndt(&self) -> u8 {
-                let val = (self.0 >> 5usize) & 0xff;
+        pub struct Respcmdr(pub u32);
+        impl Respcmdr {
+            #[doc = "Response command index"]
+            pub const fn respcmd(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0x3f;
                 val as u8
             }
-            #[doc = "Number of transfers per buffer. This 8-bit value shall be multiplied by 8 to get the size of the buffer in 32-bit words and by 32 to get the size of the buffer in bytes. Example: IDMABNDT = 0x01: buffer size = 8 words = 32 bytes. These bits can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
-            pub fn set_idmabndt(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 5usize)) | (((val as u32) & 0xff) << 5usize);
+            #[doc = "Response command index"]
+            pub fn set_respcmd(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x3f << 0usize)) | (((val as u32) & 0x3f) << 0usize);
             }
         }
-        impl Default for Idmabsizer {
-            fn default() -> Idmabsizer {
-                Idmabsizer(0)
-            }
-        }
-        #[doc = "The SDMMC_ARGR register contains a 32-bit command argument, which is sent to a card as part of a command message."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Argr(pub u32);
-        impl Argr {
-            #[doc = "Command argument. These bits can only be written by firmware when CPSM is disabled (CPSMEN = 0). Command argument sent to a card as part of a command message. If a command contains an argument, it must be loaded into this register before writing a command to the command register."]
-            pub const fn cmdarg(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "Command argument. These bits can only be written by firmware when CPSM is disabled (CPSMEN = 0). Command argument sent to a card as part of a command message. If a command contains an argument, it must be loaded into this register before writing a command to the command register."]
-            pub fn set_cmdarg(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Argr {
-            fn default() -> Argr {
-                Argr(0)
-            }
-        }
-        #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Resp4r(pub u32);
-        impl Resp4r {
-            #[doc = "see Table404."]
-            pub const fn cardstatus4(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "see Table404."]
-            pub fn set_cardstatus4(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Resp4r {
-            fn default() -> Resp4r {
-                Resp4r(0)
+        impl Default for Respcmdr {
+            fn default() -> Respcmdr {
+                Respcmdr(0)
             }
         }
         #[doc = "The SDMMC_CLKCR register controls the SDMMC_CK output clock, the SDMMC_RX_CLK receive clock, and the bus width."]
@@ -22342,50 +15813,6 @@ pub mod sdmmc_v2 {
                 Clkcr(0)
             }
         }
-        #[doc = "The SDMMC_IDMABASE1R register contains the double buffer configuration second buffer memory base address."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Idmabase1r(pub u32);
-        impl Idmabase1r {
-            #[doc = "Buffer 1 memory base address, shall be word aligned (bit [1:0]
-are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 1 is inactive (IDMABACT = 0)."]
-            pub const fn idmabase1(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "Buffer 1 memory base address, shall be word aligned (bit [1:0]
-are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 1 is inactive (IDMABACT = 0)."]
-            pub fn set_idmabase1(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Idmabase1r {
-            fn default() -> Idmabase1r {
-                Idmabase1r(0)
-            }
-        }
-        #[doc = "The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO.When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Fifor(pub u32);
-        impl Fifor {
-            #[doc = "Receive and transmit FIFO data This register can only be read or written by firmware when the DPSM is active (DPSMACT=1). The FIFO data occupies 16 entries of 32-bit words."]
-            pub const fn fifodata(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "Receive and transmit FIFO data This register can only be read or written by firmware when the DPSM is active (DPSMACT=1). The FIFO data occupies 16 entries of 32-bit words."]
-            pub fn set_fifodata(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Fifor {
-            fn default() -> Fifor {
-                Fifor(0)
-            }
-        }
         #[doc = "The SDMMC_DLENR register contains the number of data bytes to be transferred. The value is loaded into the data counter when data transfer starts."]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -22407,1002 +15834,79 @@ are always 0 and read only). This register can be written by firmware when DPSM
                 Dlenr(0)
             }
         }
-        #[doc = "The SDMMC_DTIMER register contains the data timeout period, in card bus clock periods. A counter loads the value from the SDMMC_DTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_R or Busy state. If the timer reaches 0 while the DPSM is in either of these states, the timeout status flag is set."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Dtimer(pub u32);
-        impl Dtimer {
-            #[doc = "Data and R1b busy timeout period This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). Data and R1b busy timeout period expressed in card bus clock periods."]
-            pub const fn datatime(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "Data and R1b busy timeout period This bit can only be written when the CPSM and DPSM are not active (CPSMACT = 0 and DPSMACT = 0). Data and R1b busy timeout period expressed in card bus clock periods."]
-            pub fn set_datatime(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Dtimer {
-            fn default() -> Dtimer {
-                Dtimer(0)
-            }
-        }
-        #[doc = "The SDMMC_ACKTIMER register contains the acknowledgment timeout period, in SDMMC_CK bus clock periods. A counter loads the value from the SDMMC_ACKTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_Ack state. If the timer reaches 0 while the DPSM is in this states, the acknowledgment timeout status flag is set."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Acktimer(pub u32);
-        impl Acktimer {
-            #[doc = "Boot acknowledgment timeout period This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). Boot acknowledgment timeout period expressed in card bus clock periods."]
-            pub const fn acktime(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0x01ff_ffff;
-                val as u32
-            }
-            #[doc = "Boot acknowledgment timeout period This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). Boot acknowledgment timeout period expressed in card bus clock periods."]
-            pub fn set_acktime(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0x01ff_ffff << 0usize)) | (((val as u32) & 0x01ff_ffff) << 0usize);
-            }
-        }
-        impl Default for Acktimer {
-            fn default() -> Acktimer {
-                Acktimer(0)
-            }
-        }
         #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Resp1r(pub u32);
-        impl Resp1r {
-            #[doc = "see Table 432"]
-            pub const fn cardstatus1(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "see Table 432"]
-            pub fn set_cardstatus1(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Resp1r {
-            fn default() -> Resp1r {
-                Resp1r(0)
-            }
-        }
-        #[doc = "SDMMC power control register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Power(pub u32);
-        impl Power {
-            #[doc = "SDMMC state control bits. These bits can only be written when the SDMMC is not in the power-on state (PWRCTRL?11). These bits are used to define the functional state of the SDMMC signals: Any further write will be ignored, PWRCTRL value will keep 11."]
-            pub const fn pwrctrl(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0x03;
-                val as u8
-            }
-            #[doc = "SDMMC state control bits. These bits can only be written when the SDMMC is not in the power-on state (PWRCTRL?11). These bits are used to define the functional state of the SDMMC signals: Any further write will be ignored, PWRCTRL value will keep 11."]
-            pub fn set_pwrctrl(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 0usize)) | (((val as u32) & 0x03) << 0usize);
-            }
-            #[doc = "Voltage switch sequence start. This bit is used to start the timing critical section of the voltage switch sequence:"]
-            pub const fn vswitch(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Voltage switch sequence start. This bit is used to start the timing critical section of the voltage switch sequence:"]
-            pub fn set_vswitch(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Voltage switch procedure enable. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). This bit is used to stop the SDMMC_CK after the voltage switch command response:"]
-            pub const fn vswitchen(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Voltage switch procedure enable. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). This bit is used to stop the SDMMC_CK after the voltage switch command response:"]
-            pub fn set_vswitchen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Data and command direction signals polarity selection. This bit can only be written when the SDMMC is in the power-off state (PWRCTRL = 00)."]
-            pub const fn dirpol(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Data and command direction signals polarity selection. This bit can only be written when the SDMMC is in the power-off state (PWRCTRL = 00)."]
-            pub fn set_dirpol(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-        }
-        impl Default for Power {
-            fn default() -> Power {
-                Power(0)
-            }
-        }
-        #[doc = "The SDMMC_IDMABASE0R register contains the memory buffer base address in single buffer configuration and the buffer 0 base address in double buffer configuration."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Idmabase0r(pub u32);
-        impl Idmabase0r {
-            #[doc = "Buffer 0 memory base address bits [31:2], shall be word aligned (bit [1:0]
-are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 0 is inactive (IDMABACT = 1)."]
-            pub const fn idmabase0(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "Buffer 0 memory base address bits [31:2], shall be word aligned (bit [1:0]
-are always 0 and read only). This register can be written by firmware when DPSM is inactive (DPSMACT = 0), and can dynamically be written by firmware when DPSM active (DPSMACT = 1) and memory buffer 0 is inactive (IDMABACT = 1)."]
-            pub fn set_idmabase0(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Idmabase0r {
-            fn default() -> Idmabase0r {
-                Idmabase0r(0)
-            }
-        }
-        #[doc = "The SDMMC_CMDR register contains the command index and command type bits. The command index is sent to a card as part of a command message. The command type bits control the command path state machine (CPSM)."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cmdr(pub u32);
-        impl Cmdr {
-            #[doc = "Command index. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). The command index is sent to the card as part of a command message."]
-            pub const fn cmdindex(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0x3f;
-                val as u8
-            }
-            #[doc = "Command index. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). The command index is sent to the card as part of a command message."]
-            pub fn set_cmdindex(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x3f << 0usize)) | (((val as u32) & 0x3f) << 0usize);
-            }
-            #[doc = "The CPSM treats the command as a data transfer command, stops the interrupt period, and signals DataEnable to the DPSM This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues an end of interrupt period and issues DataEnable signal to the DPSM when the command is sent."]
-            pub const fn cmdtrans(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "The CPSM treats the command as a data transfer command, stops the interrupt period, and signals DataEnable to the DPSM This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues an end of interrupt period and issues DataEnable signal to the DPSM when the command is sent."]
-            pub fn set_cmdtrans(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "The CPSM treats the command as a Stop Transmission command and signals Abort to the DPSM. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues the Abort signal to the DPSM when the command is sent."]
-            pub const fn cmdstop(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "The CPSM treats the command as a Stop Transmission command and signals Abort to the DPSM. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). If this bit is set, the CPSM issues the Abort signal to the DPSM when the command is sent."]
-            pub fn set_cmdstop(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Wait for response bits. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). They are used to configure whether the CPSM is to wait for a response, and if yes, which kind of response."]
-            pub const fn waitresp(&self) -> u8 {
-                let val = (self.0 >> 8usize) & 0x03;
-                val as u8
-            }
-            #[doc = "Wait for response bits. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). They are used to configure whether the CPSM is to wait for a response, and if yes, which kind of response."]
-            pub fn set_waitresp(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 8usize)) | (((val as u32) & 0x03) << 8usize);
-            }
-            #[doc = "CPSM waits for interrupt request. If this bit is set, the CPSM disables command timeout and waits for an card interrupt request (Response). If this bit is cleared in the CPSM Wait state, will cause the abort of the interrupt mode."]
-            pub const fn waitint(&self) -> bool {
-                let val = (self.0 >> 10usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CPSM waits for interrupt request. If this bit is set, the CPSM disables command timeout and waits for an card interrupt request (Response). If this bit is cleared in the CPSM Wait state, will cause the abort of the interrupt mode."]
-            pub fn set_waitint(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
-            }
-            #[doc = "CPSM Waits for end of data transfer (CmdPend internal signal) from DPSM. This bit when set, the CPSM waits for the end of data transfer trigger before it starts sending a command. WAITPEND is only taken into account when DTMODE = MMC stream data transfer, WIDBUS = 1-bit wide bus mode, DPSMACT = 1 and DTDIR = from host to card."]
-            pub const fn waitpend(&self) -> bool {
-                let val = (self.0 >> 11usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CPSM Waits for end of data transfer (CmdPend internal signal) from DPSM. This bit when set, the CPSM waits for the end of data transfer trigger before it starts sending a command. WAITPEND is only taken into account when DTMODE = MMC stream data transfer, WIDBUS = 1-bit wide bus mode, DPSMACT = 1 and DTDIR = from host to card."]
-            pub fn set_waitpend(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
-            }
-            #[doc = "Command path state machine (CPSM) Enable bit This bit is written 1 by firmware, and cleared by hardware when the CPSM enters the Idle state. If this bit is set, the CPSM is enabled. When DTEN = 1, no command will be transfered nor boot procedure will be started. CPSMEN is cleared to 0."]
-            pub const fn cpsmen(&self) -> bool {
-                let val = (self.0 >> 12usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Command path state machine (CPSM) Enable bit This bit is written 1 by firmware, and cleared by hardware when the CPSM enters the Idle state. If this bit is set, the CPSM is enabled. When DTEN = 1, no command will be transfered nor boot procedure will be started. CPSMEN is cleared to 0."]
-            pub fn set_cpsmen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
-            }
-            #[doc = "Hold new data block transmission and reception in the DPSM. If this bit is set, the DPSM will not move from the Wait_S state to the Send state or from the Wait_R state to the Receive state."]
-            pub const fn dthold(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Hold new data block transmission and reception in the DPSM. If this bit is set, the DPSM will not move from the Wait_S state to the Send state or from the Wait_R state to the Receive state."]
-            pub fn set_dthold(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
-            }
-            #[doc = "Select the boot mode procedure to be used. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0)"]
-            pub const fn bootmode(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Select the boot mode procedure to be used. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0)"]
-            pub fn set_bootmode(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
-            }
-            #[doc = "Enable boot mode procedure."]
-            pub const fn booten(&self) -> bool {
-                let val = (self.0 >> 15usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Enable boot mode procedure."]
-            pub fn set_booten(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
-            }
-            #[doc = "The CPSM treats the command as a Suspend or Resume command and signals interrupt period start/end. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). CMDSUSPEND = 1 and CMDTRANS = 0 Suspend command, start interrupt period when response bit BS=0. CMDSUSPEND = 1 and CMDTRANS = 1 Resume command with data, end interrupt period when response bit DF=1."]
-            pub const fn cmdsuspend(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "The CPSM treats the command as a Suspend or Resume command and signals interrupt period start/end. This bit can only be written by firmware when CPSM is disabled (CPSMEN = 0). CMDSUSPEND = 1 and CMDTRANS = 0 Suspend command, start interrupt period when response bit BS=0. CMDSUSPEND = 1 and CMDTRANS = 1 Resume command with data, end interrupt period when response bit DF=1."]
-            pub fn set_cmdsuspend(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
-        }
-        impl Default for Cmdr {
-            fn default() -> Cmdr {
-                Cmdr(0)
-            }
-        }
-        #[doc = "The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Resp3r(pub u32);
-        impl Resp3r {
+        pub struct Resp4r(pub u32);
+        impl Resp4r {
             #[doc = "see Table404."]
-            pub const fn cardstatus3(&self) -> u32 {
+            pub const fn cardstatus4(&self) -> u32 {
                 let val = (self.0 >> 0usize) & 0xffff_ffff;
                 val as u32
             }
             #[doc = "see Table404."]
-            pub fn set_cardstatus3(&mut self, val: u32) {
+            pub fn set_cardstatus4(&mut self, val: u32) {
                 self.0 =
                     (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
             }
         }
-        impl Default for Resp3r {
-            fn default() -> Resp3r {
-                Resp3r(0)
-            }
-        }
-        #[doc = "The SDMMC_ICR register is a write-only register. Writing a bit with 1 clears the corresponding bit in the SDMMC_STAR status register."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Icr(pub u32);
-        impl Icr {
-            #[doc = "CCRCFAIL flag clear bit Set by software to clear the CCRCFAIL flag."]
-            pub const fn ccrcfailc(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CCRCFAIL flag clear bit Set by software to clear the CCRCFAIL flag."]
-            pub fn set_ccrcfailc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "DCRCFAIL flag clear bit Set by software to clear the DCRCFAIL flag."]
-            pub const fn dcrcfailc(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DCRCFAIL flag clear bit Set by software to clear the DCRCFAIL flag."]
-            pub fn set_dcrcfailc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "CTIMEOUT flag clear bit Set by software to clear the CTIMEOUT flag."]
-            pub const fn ctimeoutc(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CTIMEOUT flag clear bit Set by software to clear the CTIMEOUT flag."]
-            pub fn set_ctimeoutc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "DTIMEOUT flag clear bit Set by software to clear the DTIMEOUT flag."]
-            pub const fn dtimeoutc(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DTIMEOUT flag clear bit Set by software to clear the DTIMEOUT flag."]
-            pub fn set_dtimeoutc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "TXUNDERR flag clear bit Set by software to clear TXUNDERR flag."]
-            pub const fn txunderrc(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "TXUNDERR flag clear bit Set by software to clear TXUNDERR flag."]
-            pub fn set_txunderrc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "RXOVERR flag clear bit Set by software to clear the RXOVERR flag."]
-            pub const fn rxoverrc(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "RXOVERR flag clear bit Set by software to clear the RXOVERR flag."]
-            pub fn set_rxoverrc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "CMDREND flag clear bit Set by software to clear the CMDREND flag."]
-            pub const fn cmdrendc(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CMDREND flag clear bit Set by software to clear the CMDREND flag."]
-            pub fn set_cmdrendc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "CMDSENT flag clear bit Set by software to clear the CMDSENT flag."]
-            pub const fn cmdsentc(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CMDSENT flag clear bit Set by software to clear the CMDSENT flag."]
-            pub fn set_cmdsentc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "DATAEND flag clear bit Set by software to clear the DATAEND flag."]
-            pub const fn dataendc(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DATAEND flag clear bit Set by software to clear the DATAEND flag."]
-            pub fn set_dataendc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "DHOLD flag clear bit Set by software to clear the DHOLD flag."]
-            pub const fn dholdc(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DHOLD flag clear bit Set by software to clear the DHOLD flag."]
-            pub fn set_dholdc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "DBCKEND flag clear bit Set by software to clear the DBCKEND flag."]
-            pub const fn dbckendc(&self) -> bool {
-                let val = (self.0 >> 10usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DBCKEND flag clear bit Set by software to clear the DBCKEND flag."]
-            pub fn set_dbckendc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
-            }
-            #[doc = "DABORT flag clear bit Set by software to clear the DABORT flag."]
-            pub const fn dabortc(&self) -> bool {
-                let val = (self.0 >> 11usize) & 0x01;
-                val != 0
-            }
-            #[doc = "DABORT flag clear bit Set by software to clear the DABORT flag."]
-            pub fn set_dabortc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
-            }
-            #[doc = "BUSYD0END flag clear bit Set by software to clear the BUSYD0END flag."]
-            pub const fn busyd0endc(&self) -> bool {
-                let val = (self.0 >> 21usize) & 0x01;
-                val != 0
-            }
-            #[doc = "BUSYD0END flag clear bit Set by software to clear the BUSYD0END flag."]
-            pub fn set_busyd0endc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
-            }
-            #[doc = "SDIOIT flag clear bit Set by software to clear the SDIOIT flag."]
-            pub const fn sdioitc(&self) -> bool {
-                let val = (self.0 >> 22usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SDIOIT flag clear bit Set by software to clear the SDIOIT flag."]
-            pub fn set_sdioitc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
-            }
-            #[doc = "ACKFAIL flag clear bit Set by software to clear the ACKFAIL flag."]
-            pub const fn ackfailc(&self) -> bool {
-                let val = (self.0 >> 23usize) & 0x01;
-                val != 0
-            }
-            #[doc = "ACKFAIL flag clear bit Set by software to clear the ACKFAIL flag."]
-            pub fn set_ackfailc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
-            }
-            #[doc = "ACKTIMEOUT flag clear bit Set by software to clear the ACKTIMEOUT flag."]
-            pub const fn acktimeoutc(&self) -> bool {
-                let val = (self.0 >> 24usize) & 0x01;
-                val != 0
-            }
-            #[doc = "ACKTIMEOUT flag clear bit Set by software to clear the ACKTIMEOUT flag."]
-            pub fn set_acktimeoutc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize);
-            }
-            #[doc = "VSWEND flag clear bit Set by software to clear the VSWEND flag."]
-            pub const fn vswendc(&self) -> bool {
-                let val = (self.0 >> 25usize) & 0x01;
-                val != 0
-            }
-            #[doc = "VSWEND flag clear bit Set by software to clear the VSWEND flag."]
-            pub fn set_vswendc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize);
-            }
-            #[doc = "CKSTOP flag clear bit Set by software to clear the CKSTOP flag."]
-            pub const fn ckstopc(&self) -> bool {
-                let val = (self.0 >> 26usize) & 0x01;
-                val != 0
-            }
-            #[doc = "CKSTOP flag clear bit Set by software to clear the CKSTOP flag."]
-            pub fn set_ckstopc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
-            }
-            #[doc = "IDMA transfer error clear bit Set by software to clear the IDMATE flag."]
-            pub const fn idmatec(&self) -> bool {
-                let val = (self.0 >> 27usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IDMA transfer error clear bit Set by software to clear the IDMATE flag."]
-            pub fn set_idmatec(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize);
-            }
-            #[doc = "IDMA buffer transfer complete clear bit Set by software to clear the IDMABTC flag."]
-            pub const fn idmabtcc(&self) -> bool {
-                let val = (self.0 >> 28usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IDMA buffer transfer complete clear bit Set by software to clear the IDMABTC flag."]
-            pub fn set_idmabtcc(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize);
-            }
-        }
-        impl Default for Icr {
-            fn default() -> Icr {
-                Icr(0)
-            }
-        }
-        #[doc = "The SDMMC_DCTRL register control the data path state machine (DPSM)."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Dctrl(pub u32);
-        impl Dctrl {
-            #[doc = "Data transfer enable bit This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). This bit is cleared by Hardware when data transfer completes. This bit shall only be used to transfer data when no associated data transfer command is used, i.e. shall not be used with SD or eMMC cards."]
-            pub const fn dten(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Data transfer enable bit This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). This bit is cleared by Hardware when data transfer completes. This bit shall only be used to transfer data when no associated data transfer command is used, i.e. shall not be used with SD or eMMC cards."]
-            pub fn set_dten(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Data transfer direction selection This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
-            pub const fn dtdir(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Data transfer direction selection This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
-            pub fn set_dtdir(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Data transfer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
-            pub const fn dtmode(&self) -> u8 {
-                let val = (self.0 >> 2usize) & 0x03;
-                val as u8
-            }
-            #[doc = "Data transfer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
-            pub fn set_dtmode(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 2usize)) | (((val as u32) & 0x03) << 2usize);
-            }
-            #[doc = "Data block size This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). Define the data block length when the block data transfer mode is selected: When DATALENGTH is not a multiple of DBLOCKSIZE, the transfered data is truncated at a multiple of DBLOCKSIZE. (Any remain data will not be transfered.) When DDR = 1, DBLOCKSIZE = 0000 shall not be used. (No data will be transfered)"]
-            pub const fn dblocksize(&self) -> u8 {
-                let val = (self.0 >> 4usize) & 0x0f;
-                val as u8
-            }
-            #[doc = "Data block size This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). Define the data block length when the block data transfer mode is selected: When DATALENGTH is not a multiple of DBLOCKSIZE, the transfered data is truncated at a multiple of DBLOCKSIZE. (Any remain data will not be transfered.) When DDR = 1, DBLOCKSIZE = 0000 shall not be used. (No data will be transfered)"]
-            pub fn set_dblocksize(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize);
-            }
-            #[doc = "Read wait start. If this bit is set, read wait operation starts."]
-            pub const fn rwstart(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Read wait start. If this bit is set, read wait operation starts."]
-            pub fn set_rwstart(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Read wait stop This bit is written by firmware and auto cleared by hardware when the DPSM moves from the READ_WAIT state to the WAIT_R or IDLE state."]
-            pub const fn rwstop(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Read wait stop This bit is written by firmware and auto cleared by hardware when the DPSM moves from the READ_WAIT state to the WAIT_R or IDLE state."]
-            pub fn set_rwstop(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "Read wait mode. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
-            pub const fn rwmod(&self) -> bool {
-                let val = (self.0 >> 10usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Read wait mode. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
-            pub fn set_rwmod(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
-            }
-            #[doc = "SD I/O interrupt enable functions This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). If this bit is set, the DPSM enables the SD I/O card specific interrupt operation."]
-            pub const fn sdioen(&self) -> bool {
-                let val = (self.0 >> 11usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SD I/O interrupt enable functions This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). If this bit is set, the DPSM enables the SD I/O card specific interrupt operation."]
-            pub fn set_sdioen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
-            }
-            #[doc = "Enable the reception of the boot acknowledgment. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
-            pub const fn bootacken(&self) -> bool {
-                let val = (self.0 >> 12usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Enable the reception of the boot acknowledgment. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
-            pub fn set_bootacken(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
-            }
-            #[doc = "FIFO reset, will flush any remaining data. This bit can only be written by firmware when IDMAEN= 0 and DPSM is active (DPSMACT = 1). This bit will only take effect when a transfer error or transfer hold occurs."]
-            pub const fn fiforst(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
-                val != 0
-            }
-            #[doc = "FIFO reset, will flush any remaining data. This bit can only be written by firmware when IDMAEN= 0 and DPSM is active (DPSMACT = 1). This bit will only take effect when a transfer error or transfer hold occurs."]
-            pub fn set_fiforst(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
-            }
-        }
-        impl Default for Dctrl {
-            fn default() -> Dctrl {
-                Dctrl(0)
-            }
-        }
-        #[doc = "The interrupt mask register determines which status flags generate an interrupt request by setting the corresponding bit to 1."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Maskr(pub u32);
-        impl Maskr {
-            #[doc = "Command CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by command CRC failure."]
-            pub const fn ccrcfailie(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Command CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by command CRC failure."]
-            pub fn set_ccrcfailie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Data CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by data CRC failure."]
-            pub const fn dcrcfailie(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Data CRC fail interrupt enable Set and cleared by software to enable/disable interrupt caused by data CRC failure."]
-            pub fn set_dcrcfailie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Command timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by command timeout."]
-            pub const fn ctimeoutie(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Command timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by command timeout."]
-            pub fn set_ctimeoutie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Data timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by data timeout."]
-            pub const fn dtimeoutie(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Data timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by data timeout."]
-            pub fn set_dtimeoutie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-            #[doc = "Tx FIFO underrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO underrun error."]
-            pub const fn txunderrie(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Tx FIFO underrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO underrun error."]
-            pub fn set_txunderrie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Rx FIFO overrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO overrun error."]
-            pub const fn rxoverrie(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Rx FIFO overrun error interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO overrun error."]
-            pub fn set_rxoverrie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Command response received interrupt enable Set and cleared by software to enable/disable interrupt caused by receiving command response."]
-            pub const fn cmdrendie(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Command response received interrupt enable Set and cleared by software to enable/disable interrupt caused by receiving command response."]
-            pub fn set_cmdrendie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Command sent interrupt enable Set and cleared by software to enable/disable interrupt caused by sending command."]
-            pub const fn cmdsentie(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Command sent interrupt enable Set and cleared by software to enable/disable interrupt caused by sending command."]
-            pub fn set_cmdsentie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Data end interrupt enable Set and cleared by software to enable/disable interrupt caused by data end."]
-            pub const fn dataendie(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Data end interrupt enable Set and cleared by software to enable/disable interrupt caused by data end."]
-            pub fn set_dataendie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Data hold interrupt enable Set and cleared by software to enable/disable the interrupt generated when sending new data is hold in the DPSM Wait_S state."]
-            pub const fn dholdie(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Data hold interrupt enable Set and cleared by software to enable/disable the interrupt generated when sending new data is hold in the DPSM Wait_S state."]
-            pub fn set_dholdie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "Data block end interrupt enable Set and cleared by software to enable/disable interrupt caused by data block end."]
-            pub const fn dbckendie(&self) -> bool {
-                let val = (self.0 >> 10usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Data block end interrupt enable Set and cleared by software to enable/disable interrupt caused by data block end."]
-            pub fn set_dbckendie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
-            }
-            #[doc = "Data transfer aborted interrupt enable Set and cleared by software to enable/disable interrupt caused by a data transfer being aborted."]
-            pub const fn dabortie(&self) -> bool {
-                let val = (self.0 >> 11usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Data transfer aborted interrupt enable Set and cleared by software to enable/disable interrupt caused by a data transfer being aborted."]
-            pub fn set_dabortie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
-            }
-            #[doc = "Tx FIFO half empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO half empty."]
-            pub const fn txfifoheie(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Tx FIFO half empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO half empty."]
-            pub fn set_txfifoheie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
-            }
-            #[doc = "Rx FIFO half full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO half full."]
-            pub const fn rxfifohfie(&self) -> bool {
-                let val = (self.0 >> 15usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Rx FIFO half full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO half full."]
-            pub fn set_rxfifohfie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
-            }
-            #[doc = "Rx FIFO full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO full."]
-            pub const fn rxfifofie(&self) -> bool {
-                let val = (self.0 >> 17usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Rx FIFO full interrupt enable Set and cleared by software to enable/disable interrupt caused by Rx FIFO full."]
-            pub fn set_rxfifofie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
-            }
-            #[doc = "Tx FIFO empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO empty."]
-            pub const fn txfifoeie(&self) -> bool {
-                let val = (self.0 >> 18usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Tx FIFO empty interrupt enable Set and cleared by software to enable/disable interrupt caused by Tx FIFO empty."]
-            pub fn set_txfifoeie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize);
-            }
-            #[doc = "BUSYD0END interrupt enable Set and cleared by software to enable/disable the interrupt generated when SDMMC_D0 signal changes from busy to NOT busy following a CMD response."]
-            pub const fn busyd0endie(&self) -> bool {
-                let val = (self.0 >> 21usize) & 0x01;
-                val != 0
-            }
-            #[doc = "BUSYD0END interrupt enable Set and cleared by software to enable/disable the interrupt generated when SDMMC_D0 signal changes from busy to NOT busy following a CMD response."]
-            pub fn set_busyd0endie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
-            }
-            #[doc = "SDIO mode interrupt received interrupt enable Set and cleared by software to enable/disable the interrupt generated when receiving the SDIO mode interrupt."]
-            pub const fn sdioitie(&self) -> bool {
-                let val = (self.0 >> 22usize) & 0x01;
-                val != 0
-            }
-            #[doc = "SDIO mode interrupt received interrupt enable Set and cleared by software to enable/disable the interrupt generated when receiving the SDIO mode interrupt."]
-            pub fn set_sdioitie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
-            }
-            #[doc = "Acknowledgment Fail interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment Fail."]
-            pub const fn ackfailie(&self) -> bool {
-                let val = (self.0 >> 23usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Acknowledgment Fail interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment Fail."]
-            pub fn set_ackfailie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
-            }
-            #[doc = "Acknowledgment timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment timeout."]
-            pub const fn acktimeoutie(&self) -> bool {
-                let val = (self.0 >> 24usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Acknowledgment timeout interrupt enable Set and cleared by software to enable/disable interrupt caused by acknowledgment timeout."]
-            pub fn set_acktimeoutie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize);
-            }
-            #[doc = "Voltage switch critical timing section completion interrupt enable Set and cleared by software to enable/disable the interrupt generated when voltage switch critical timing section completion."]
-            pub const fn vswendie(&self) -> bool {
-                let val = (self.0 >> 25usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Voltage switch critical timing section completion interrupt enable Set and cleared by software to enable/disable the interrupt generated when voltage switch critical timing section completion."]
-            pub fn set_vswendie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize);
-            }
-            #[doc = "Voltage Switch clock stopped interrupt enable Set and cleared by software to enable/disable interrupt caused by Voltage Switch clock stopped."]
-            pub const fn ckstopie(&self) -> bool {
-                let val = (self.0 >> 26usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Voltage Switch clock stopped interrupt enable Set and cleared by software to enable/disable interrupt caused by Voltage Switch clock stopped."]
-            pub fn set_ckstopie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
-            }
-            #[doc = "IDMA buffer transfer complete interrupt enable Set and cleared by software to enable/disable the interrupt generated when the IDMA has transferred all data belonging to a memory buffer."]
-            pub const fn idmabtcie(&self) -> bool {
-                let val = (self.0 >> 28usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IDMA buffer transfer complete interrupt enable Set and cleared by software to enable/disable the interrupt generated when the IDMA has transferred all data belonging to a memory buffer."]
-            pub fn set_idmabtcie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize);
-            }
-        }
-        impl Default for Maskr {
-            fn default() -> Maskr {
-                Maskr(0)
-            }
-        }
-        #[doc = "SDMMC IP version register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Ver(pub u32);
-        impl Ver {
-            #[doc = "IP minor revision number."]
-            pub const fn minrev(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0x0f;
-                val as u8
-            }
-            #[doc = "IP minor revision number."]
-            pub fn set_minrev(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize);
-            }
-            #[doc = "IP major revision number."]
-            pub const fn majrev(&self) -> u8 {
-                let val = (self.0 >> 4usize) & 0x0f;
-                val as u8
-            }
-            #[doc = "IP major revision number."]
-            pub fn set_majrev(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x0f << 4usize)) | (((val as u32) & 0x0f) << 4usize);
-            }
-        }
-        impl Default for Ver {
-            fn default() -> Ver {
-                Ver(0)
-            }
-        }
-        #[doc = "The SDMMC_DCNTR register loads the value from the data length register (see SDMMC_DLENR) when the DPSM moves from the Idle state to the Wait_R or Wait_S state. As data is transferred, the counter decrements the value until it reaches 0. The DPSM then moves to the Idle state and when there has been no error, the data status end flag (DATAEND) is set."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Dcntr(pub u32);
-        impl Dcntr {
-            #[doc = "Data count value When read, the number of remaining data bytes to be transferred is returned. Write has no effect."]
-            pub const fn datacount(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0x01ff_ffff;
-                val as u32
-            }
-            #[doc = "Data count value When read, the number of remaining data bytes to be transferred is returned. Write has no effect."]
-            pub fn set_datacount(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0x01ff_ffff << 0usize)) | (((val as u32) & 0x01ff_ffff) << 0usize);
-            }
-        }
-        impl Default for Dcntr {
-            fn default() -> Dcntr {
-                Dcntr(0)
-            }
-        }
-        #[doc = "The receive and transmit FIFOs can be read or written as 32-bit wide registers. The FIFOs contain 32 entries on 32 sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO."]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Idmactrlr(pub u32);
-        impl Idmactrlr {
-            #[doc = "IDMA enable This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
-            pub const fn idmaen(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IDMA enable This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
-            pub fn set_idmaen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Buffer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
-            pub const fn idmabmode(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Buffer mode selection. This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0)."]
-            pub fn set_idmabmode(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Double buffer mode active buffer indication This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). When IDMA is enabled this bit is toggled by hardware."]
-            pub const fn idmabact(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Double buffer mode active buffer indication This bit can only be written by firmware when DPSM is inactive (DPSMACT = 0). When IDMA is enabled this bit is toggled by hardware."]
-            pub fn set_idmabact(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-        }
-        impl Default for Idmactrlr {
-            fn default() -> Idmactrlr {
-                Idmactrlr(0)
-            }
-        }
-        #[doc = "SDMMC command response register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Respcmdr(pub u32);
-        impl Respcmdr {
-            #[doc = "Response command index"]
-            pub const fn respcmd(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0x3f;
-                val as u8
-            }
-            #[doc = "Response command index"]
-            pub fn set_respcmd(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x3f << 0usize)) | (((val as u32) & 0x3f) << 0usize);
-            }
-        }
-        impl Default for Respcmdr {
-            fn default() -> Respcmdr {
-                Respcmdr(0)
-            }
-        }
-    }
-}
-pub mod rng_v1 {
-    use crate::generic::*;
-    #[doc = "Random number generator"]
-    #[derive(Copy, Clone)]
-    pub struct Rng(pub *mut u8);
-    unsafe impl Send for Rng {}
-    unsafe impl Sync for Rng {}
-    impl Rng {
-        #[doc = "control register"]
-        pub fn cr(self) -> Reg<regs::Cr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "status register"]
-        pub fn sr(self) -> Reg<regs::Sr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(4usize)) }
-        }
-        #[doc = "data register"]
-        pub fn dr(self) -> Reg<u32, R> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
-        }
-    }
-    pub mod regs {
-        use crate::generic::*;
-        #[doc = "status register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Sr(pub u32);
-        impl Sr {
-            #[doc = "Data ready"]
-            pub const fn drdy(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Data ready"]
-            pub fn set_drdy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Clock error current status"]
-            pub const fn cecs(&self) -> bool {
-                let val = (self.0 >> 1usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Clock error current status"]
-            pub fn set_cecs(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
-            }
-            #[doc = "Seed error current status"]
-            pub const fn secs(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Seed error current status"]
-            pub fn set_secs(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Clock error interrupt status"]
-            pub const fn ceis(&self) -> bool {
-                let val = (self.0 >> 5usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Clock error interrupt status"]
-            pub fn set_ceis(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
-            }
-            #[doc = "Seed error interrupt status"]
-            pub const fn seis(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Seed error interrupt status"]
-            pub fn set_seis(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-        }
-        impl Default for Sr {
-            fn default() -> Sr {
-                Sr(0)
-            }
-        }
-        #[doc = "control register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr(pub u32);
-        impl Cr {
-            #[doc = "Random number generator enable"]
-            pub const fn rngen(&self) -> bool {
-                let val = (self.0 >> 2usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Random number generator enable"]
-            pub fn set_rngen(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
-            }
-            #[doc = "Interrupt enable"]
-            pub const fn ie(&self) -> bool {
-                let val = (self.0 >> 3usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Interrupt enable"]
-            pub fn set_ie(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
-            }
-        }
-        impl Default for Cr {
-            fn default() -> Cr {
-                Cr(0)
+        impl Default for Resp4r {
+            fn default() -> Resp4r {
+                Resp4r(0)
             }
         }
     }
 }
 pub mod flash_h7 {
     use crate::generic::*;
+    #[doc = "Flash"]
+    #[derive(Copy, Clone)]
+    pub struct Flash(pub *mut u8);
+    unsafe impl Send for Flash {}
+    unsafe impl Sync for Flash {}
+    impl Flash {
+        #[doc = "Access control register"]
+        pub fn acr(self) -> Reg<regs::Acr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "Cluster BANK%s, containing KEYR?, CR?, SR?, CCR?, PRAR_CUR?, PRAR_PRG?, SCAR_CUR?, SCAR_PRG?, WPSN_CUR?R, WPSN_PRG?R, CRCCR?, CRCSADD?R, CRCEADD?R, ECC_FA?R"]
+        pub fn bank(self, n: usize) -> Bank {
+            assert!(n < 2usize);
+            unsafe { Bank(self.0.add(4usize + n * 256usize)) }
+        }
+        #[doc = "FLASH option key register"]
+        pub fn optkeyr(self) -> Reg<regs::Optkeyr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        }
+        #[doc = "FLASH option control register"]
+        pub fn optcr(self) -> Reg<regs::Optcr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(24usize)) }
+        }
+        #[doc = "FLASH option status register"]
+        pub fn optsr_cur(self) -> Reg<regs::OptsrCur, RW> {
+            unsafe { Reg::from_ptr(self.0.add(28usize)) }
+        }
+        #[doc = "FLASH option status register"]
+        pub fn optsr_prg(self) -> Reg<regs::OptsrPrg, RW> {
+            unsafe { Reg::from_ptr(self.0.add(32usize)) }
+        }
+        #[doc = "FLASH option clear control register"]
+        pub fn optccr(self) -> Reg<regs::Optccr, W> {
+            unsafe { Reg::from_ptr(self.0.add(36usize)) }
+        }
+        #[doc = "FLASH register with boot address"]
+        pub fn boot_curr(self) -> Reg<regs::BootCurr, R> {
+            unsafe { Reg::from_ptr(self.0.add(64usize)) }
+        }
+        #[doc = "FLASH register with boot address"]
+        pub fn boot_prgr(self) -> Reg<regs::BootPrgr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(68usize)) }
+        }
+        #[doc = "FLASH CRC data register"]
+        pub fn crcdatar(self) -> Reg<regs::Crcdatar, RW> {
+            unsafe { Reg::from_ptr(self.0.add(92usize)) }
+        }
+    }
     #[doc = "Cluster BANK%s, containing KEYR?, CR?, SR?, CCR?, PRAR_CUR?, PRAR_PRG?, SCAR_CUR?, SCAR_PRG?, WPSN_CUR?R, WPSN_PRG?R, CRCCR?, CRCSADD?R, CRCEADD?R, ECC_FA?R"]
     #[derive(Copy, Clone)]
     pub struct Bank(pub *mut u8);
@@ -23466,56 +15970,344 @@ pub mod flash_h7 {
             unsafe { Reg::from_ptr(self.0.add(92usize)) }
         }
     }
-    #[doc = "Flash"]
-    #[derive(Copy, Clone)]
-    pub struct Flash(pub *mut u8);
-    unsafe impl Send for Flash {}
-    unsafe impl Sync for Flash {}
-    impl Flash {
-        #[doc = "Access control register"]
-        pub fn acr(self) -> Reg<regs::Acr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(0usize)) }
-        }
-        #[doc = "Cluster BANK%s, containing KEYR?, CR?, SR?, CCR?, PRAR_CUR?, PRAR_PRG?, SCAR_CUR?, SCAR_PRG?, WPSN_CUR?R, WPSN_PRG?R, CRCCR?, CRCSADD?R, CRCEADD?R, ECC_FA?R"]
-        pub fn bank(self, n: usize) -> Bank {
-            assert!(n < 2usize);
-            unsafe { Bank(self.0.add(4usize + n * 256usize)) }
-        }
-        #[doc = "FLASH option key register"]
-        pub fn optkeyr(self) -> Reg<regs::Optkeyr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(8usize)) }
-        }
-        #[doc = "FLASH option control register"]
-        pub fn optcr(self) -> Reg<regs::Optcr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(24usize)) }
-        }
-        #[doc = "FLASH option status register"]
-        pub fn optsr_cur(self) -> Reg<regs::OptsrCur, RW> {
-            unsafe { Reg::from_ptr(self.0.add(28usize)) }
-        }
-        #[doc = "FLASH option status register"]
-        pub fn optsr_prg(self) -> Reg<regs::OptsrPrg, RW> {
-            unsafe { Reg::from_ptr(self.0.add(32usize)) }
-        }
-        #[doc = "FLASH option clear control register"]
-        pub fn optccr(self) -> Reg<regs::Optccr, W> {
-            unsafe { Reg::from_ptr(self.0.add(36usize)) }
-        }
-        #[doc = "FLASH register with boot address"]
-        pub fn boot_curr(self) -> Reg<regs::BootCurr, R> {
-            unsafe { Reg::from_ptr(self.0.add(64usize)) }
-        }
-        #[doc = "FLASH register with boot address"]
-        pub fn boot_prgr(self) -> Reg<regs::BootPrgr, RW> {
-            unsafe { Reg::from_ptr(self.0.add(68usize)) }
-        }
-        #[doc = "FLASH CRC data register"]
-        pub fn crcdatar(self) -> Reg<regs::Crcdatar, RW> {
-            unsafe { Reg::from_ptr(self.0.add(92usize)) }
-        }
-    }
     pub mod regs {
         use crate::generic::*;
+        #[doc = "FLASH CRC start address register for bank 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Crcsaddr(pub u32);
+        impl Crcsaddr {
+            #[doc = "CRC start address on bank 1"]
+            pub const fn crc_start_addr(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
+            }
+            #[doc = "CRC start address on bank 1"]
+            pub fn set_crc_start_addr(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            }
+        }
+        impl Default for Crcsaddr {
+            fn default() -> Crcsaddr {
+                Crcsaddr(0)
+            }
+        }
+        #[doc = "FLASH option status register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct OptsrPrg(pub u32);
+        impl OptsrPrg {
+            #[doc = "BOR reset level option configuration bits"]
+            pub const fn bor_lev(&self) -> u8 {
+                let val = (self.0 >> 2usize) & 0x03;
+                val as u8
+            }
+            #[doc = "BOR reset level option configuration bits"]
+            pub fn set_bor_lev(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 2usize)) | (((val as u32) & 0x03) << 2usize);
+            }
+            #[doc = "IWDG1 option configuration bit"]
+            pub const fn iwdg1_hw(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IWDG1 option configuration bit"]
+            pub fn set_iwdg1_hw(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Option byte erase after D1 DStop option configuration bit"]
+            pub const fn n_rst_stop_d1(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Option byte erase after D1 DStop option configuration bit"]
+            pub fn set_n_rst_stop_d1(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Option byte erase after D1 DStandby option configuration bit"]
+            pub const fn n_rst_stby_d1(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Option byte erase after D1 DStandby option configuration bit"]
+            pub fn set_n_rst_stby_d1(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Readout protection level option configuration byte"]
+            pub const fn rdp(&self) -> u8 {
+                let val = (self.0 >> 8usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Readout protection level option configuration byte"]
+            pub fn set_rdp(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize);
+            }
+            #[doc = "IWDG Stop mode freeze option configuration bit"]
+            pub const fn fz_iwdg_stop(&self) -> bool {
+                let val = (self.0 >> 17usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IWDG Stop mode freeze option configuration bit"]
+            pub fn set_fz_iwdg_stop(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
+            }
+            #[doc = "IWDG Standby mode freeze option configuration bit"]
+            pub const fn fz_iwdg_sdby(&self) -> bool {
+                let val = (self.0 >> 18usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IWDG Standby mode freeze option configuration bit"]
+            pub fn set_fz_iwdg_sdby(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize);
+            }
+            #[doc = "DTCM size select option configuration bits"]
+            pub const fn st_ram_size(&self) -> u8 {
+                let val = (self.0 >> 19usize) & 0x03;
+                val as u8
+            }
+            #[doc = "DTCM size select option configuration bits"]
+            pub fn set_st_ram_size(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 19usize)) | (((val as u32) & 0x03) << 19usize);
+            }
+            #[doc = "Security option configuration bit"]
+            pub const fn security(&self) -> bool {
+                let val = (self.0 >> 21usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Security option configuration bit"]
+            pub fn set_security(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
+            }
+            #[doc = "User option configuration bit 1"]
+            pub const fn rss1(&self) -> bool {
+                let val = (self.0 >> 26usize) & 0x01;
+                val != 0
+            }
+            #[doc = "User option configuration bit 1"]
+            pub fn set_rss1(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
+            }
+            #[doc = "User option configuration bit 2"]
+            pub const fn rss2(&self) -> bool {
+                let val = (self.0 >> 27usize) & 0x01;
+                val != 0
+            }
+            #[doc = "User option configuration bit 2"]
+            pub fn set_rss2(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize);
+            }
+            #[doc = "I/O high-speed at low-voltage (PRODUCT_BELOW_25V)"]
+            pub const fn io_hslv(&self) -> bool {
+                let val = (self.0 >> 29usize) & 0x01;
+                val != 0
+            }
+            #[doc = "I/O high-speed at low-voltage (PRODUCT_BELOW_25V)"]
+            pub fn set_io_hslv(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize);
+            }
+            #[doc = "Bank swapping option configuration bit"]
+            pub const fn swap_bank_opt(&self) -> bool {
+                let val = (self.0 >> 31usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Bank swapping option configuration bit"]
+            pub fn set_swap_bank_opt(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
+            }
+        }
+        impl Default for OptsrPrg {
+            fn default() -> OptsrPrg {
+                OptsrPrg(0)
+            }
+        }
+        #[doc = "FLASH option status register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct OptsrCur(pub u32);
+        impl OptsrCur {
+            #[doc = "Option byte change ongoing flag"]
+            pub const fn opt_busy(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Option byte change ongoing flag"]
+            pub fn set_opt_busy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Brownout level option status bit"]
+            pub const fn bor_lev(&self) -> u8 {
+                let val = (self.0 >> 2usize) & 0x03;
+                val as u8
+            }
+            #[doc = "Brownout level option status bit"]
+            pub fn set_bor_lev(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 2usize)) | (((val as u32) & 0x03) << 2usize);
+            }
+            #[doc = "IWDG1 control option status bit"]
+            pub const fn iwdg1_hw(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IWDG1 control option status bit"]
+            pub fn set_iwdg1_hw(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "D1 DStop entry reset option status bit"]
+            pub const fn n_rst_stop_d1(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "D1 DStop entry reset option status bit"]
+            pub fn set_n_rst_stop_d1(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "D1 DStandby entry reset option status bit"]
+            pub const fn n_rst_stby_d1(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "D1 DStandby entry reset option status bit"]
+            pub fn set_n_rst_stby_d1(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Readout protection level option status byte"]
+            pub const fn rdp(&self) -> u8 {
+                let val = (self.0 >> 8usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Readout protection level option status byte"]
+            pub fn set_rdp(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize);
+            }
+            #[doc = "IWDG Stop mode freeze option status bit"]
+            pub const fn fz_iwdg_stop(&self) -> bool {
+                let val = (self.0 >> 17usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IWDG Stop mode freeze option status bit"]
+            pub fn set_fz_iwdg_stop(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
+            }
+            #[doc = "IWDG Standby mode freeze option status bit"]
+            pub const fn fz_iwdg_sdby(&self) -> bool {
+                let val = (self.0 >> 18usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IWDG Standby mode freeze option status bit"]
+            pub fn set_fz_iwdg_sdby(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize);
+            }
+            #[doc = "DTCM RAM size option status"]
+            pub const fn st_ram_size(&self) -> u8 {
+                let val = (self.0 >> 19usize) & 0x03;
+                val as u8
+            }
+            #[doc = "DTCM RAM size option status"]
+            pub fn set_st_ram_size(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 19usize)) | (((val as u32) & 0x03) << 19usize);
+            }
+            #[doc = "Security enable option status bit"]
+            pub const fn security(&self) -> bool {
+                let val = (self.0 >> 21usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Security enable option status bit"]
+            pub fn set_security(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
+            }
+            #[doc = "User option bit 1"]
+            pub const fn rss1(&self) -> bool {
+                let val = (self.0 >> 26usize) & 0x01;
+                val != 0
+            }
+            #[doc = "User option bit 1"]
+            pub fn set_rss1(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
+            }
+            #[doc = "Device personalization status bit"]
+            pub const fn perso_ok(&self) -> bool {
+                let val = (self.0 >> 28usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Device personalization status bit"]
+            pub fn set_perso_ok(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize);
+            }
+            #[doc = "I/O high-speed at low-voltage status bit (PRODUCT_BELOW_25V)"]
+            pub const fn io_hslv(&self) -> bool {
+                let val = (self.0 >> 29usize) & 0x01;
+                val != 0
+            }
+            #[doc = "I/O high-speed at low-voltage status bit (PRODUCT_BELOW_25V)"]
+            pub fn set_io_hslv(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize);
+            }
+            #[doc = "Option byte change error flag"]
+            pub const fn optchangeerr(&self) -> bool {
+                let val = (self.0 >> 30usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Option byte change error flag"]
+            pub fn set_optchangeerr(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize);
+            }
+            #[doc = "Bank swapping option status bit"]
+            pub const fn swap_bank_opt(&self) -> bool {
+                let val = (self.0 >> 31usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Bank swapping option status bit"]
+            pub fn set_swap_bank_opt(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
+            }
+        }
+        impl Default for OptsrCur {
+            fn default() -> OptsrCur {
+                OptsrCur(0)
+            }
+        }
+        #[doc = "FLASH write sector protection for bank 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct WpsnPrgr(pub u32);
+        impl WpsnPrgr {
+            #[doc = "Bank 1 sector write protection configuration byte"]
+            pub const fn wrpsn(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Bank 1 sector write protection configuration byte"]
+            pub fn set_wrpsn(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
+            }
+        }
+        impl Default for WpsnPrgr {
+            fn default() -> WpsnPrgr {
+                WpsnPrgr(0)
+            }
+        }
+        #[doc = "FLASH CRC end address register for bank 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Crceaddr(pub u32);
+        impl Crceaddr {
+            #[doc = "CRC end address on bank 1"]
+            pub const fn crc_end_addr(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
+            }
+            #[doc = "CRC end address on bank 1"]
+            pub fn set_crc_end_addr(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            }
+        }
+        impl Default for Crceaddr {
+            fn default() -> Crceaddr {
+                Crceaddr(0)
+            }
+        }
         #[doc = "FLASH control register for bank 1"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -23707,6 +16499,26 @@ pub mod flash_h7 {
                 Cr(0)
             }
         }
+        #[doc = "FLASH option clear control register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Optccr(pub u32);
+        impl Optccr {
+            #[doc = "OPTCHANGEERR reset bit"]
+            pub const fn clr_optchangeerr(&self) -> bool {
+                let val = (self.0 >> 30usize) & 0x01;
+                val != 0
+            }
+            #[doc = "OPTCHANGEERR reset bit"]
+            pub fn set_clr_optchangeerr(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize);
+            }
+        }
+        impl Default for Optccr {
+            fn default() -> Optccr {
+                Optccr(0)
+            }
+        }
         #[doc = "FLASH CRC control register for bank 1"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -23790,69 +16602,6 @@ pub mod flash_h7 {
                 Crccr(0)
             }
         }
-        #[doc = "FLASH CRC data register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Crcdatar(pub u32);
-        impl Crcdatar {
-            #[doc = "CRC result"]
-            pub const fn crc_data(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "CRC result"]
-            pub fn set_crc_data(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Crcdatar {
-            fn default() -> Crcdatar {
-                Crcdatar(0)
-            }
-        }
-        #[doc = "FLASH CRC end address register for bank 1"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Crceaddr(pub u32);
-        impl Crceaddr {
-            #[doc = "CRC end address on bank 1"]
-            pub const fn crc_end_addr(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "CRC end address on bank 1"]
-            pub fn set_crc_end_addr(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Crceaddr {
-            fn default() -> Crceaddr {
-                Crceaddr(0)
-            }
-        }
-        #[doc = "FLASH option key register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Optkeyr(pub u32);
-        impl Optkeyr {
-            #[doc = "Unlock key option bytes"]
-            pub const fn optkeyr(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "Unlock key option bytes"]
-            pub fn set_optkeyr(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Optkeyr {
-            fn default() -> Optkeyr {
-                Optkeyr(0)
-            }
-        }
         #[doc = "FLASH clear control register for bank 1"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -23963,6 +16712,26 @@ pub mod flash_h7 {
                 Ccr(0)
             }
         }
+        #[doc = "FLASH ECC fail address for bank 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Far(pub u32);
+        impl Far {
+            #[doc = "Bank 1 ECC error address"]
+            pub const fn fail_ecc_addr(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x7fff;
+                val as u16
+            }
+            #[doc = "Bank 1 ECC error address"]
+            pub fn set_fail_ecc_addr(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x7fff << 0usize)) | (((val as u32) & 0x7fff) << 0usize);
+            }
+        }
+        impl Default for Far {
+            fn default() -> Far {
+                Far(0)
+            }
+        }
         #[doc = "FLASH register with boot address"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -23992,249 +16761,46 @@ pub mod flash_h7 {
                 BootCurr(0)
             }
         }
-        #[doc = "FLASH protection address for bank 1"]
+        #[doc = "FLASH CRC data register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct PrarPrg(pub u32);
-        impl PrarPrg {
-            #[doc = "Bank 1 lowest PCROP protected address configuration"]
-            pub const fn prot_area_start(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x0fff;
-                val as u16
-            }
-            #[doc = "Bank 1 lowest PCROP protected address configuration"]
-            pub fn set_prot_area_start(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
-            }
-            #[doc = "Bank 1 highest PCROP protected address configuration"]
-            pub const fn prot_area_end(&self) -> u16 {
-                let val = (self.0 >> 16usize) & 0x0fff;
-                val as u16
-            }
-            #[doc = "Bank 1 highest PCROP protected address configuration"]
-            pub fn set_prot_area_end(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize);
-            }
-            #[doc = "Bank 1 PCROP protected erase enable option configuration bit"]
-            pub const fn dmep(&self) -> bool {
-                let val = (self.0 >> 31usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Bank 1 PCROP protected erase enable option configuration bit"]
-            pub fn set_dmep(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
-            }
-        }
-        impl Default for PrarPrg {
-            fn default() -> PrarPrg {
-                PrarPrg(0)
-            }
-        }
-        #[doc = "FLASH write sector protection for bank 1"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct WpsnPrgr(pub u32);
-        impl WpsnPrgr {
-            #[doc = "Bank 1 sector write protection configuration byte"]
-            pub const fn wrpsn(&self) -> u8 {
-                let val = (self.0 >> 0usize) & 0xff;
-                val as u8
-            }
-            #[doc = "Bank 1 sector write protection configuration byte"]
-            pub fn set_wrpsn(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
-            }
-        }
-        impl Default for WpsnPrgr {
-            fn default() -> WpsnPrgr {
-                WpsnPrgr(0)
-            }
-        }
-        #[doc = "FLASH CRC start address register for bank 1"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Crcsaddr(pub u32);
-        impl Crcsaddr {
-            #[doc = "CRC start address on bank 1"]
-            pub const fn crc_start_addr(&self) -> u32 {
+        pub struct Crcdatar(pub u32);
+        impl Crcdatar {
+            #[doc = "CRC result"]
+            pub const fn crc_data(&self) -> u32 {
                 let val = (self.0 >> 0usize) & 0xffff_ffff;
                 val as u32
             }
-            #[doc = "CRC start address on bank 1"]
-            pub fn set_crc_start_addr(&mut self, val: u32) {
+            #[doc = "CRC result"]
+            pub fn set_crc_data(&mut self, val: u32) {
                 self.0 =
                     (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
             }
         }
-        impl Default for Crcsaddr {
-            fn default() -> Crcsaddr {
-                Crcsaddr(0)
+        impl Default for Crcdatar {
+            fn default() -> Crcdatar {
+                Crcdatar(0)
             }
         }
-        #[doc = "FLASH secure address for bank 1"]
+        #[doc = "FLASH option key register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct ScarCur(pub u32);
-        impl ScarCur {
-            #[doc = "Bank 1 lowest secure protected address"]
-            pub const fn sec_area_start(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x0fff;
-                val as u16
+        pub struct Optkeyr(pub u32);
+        impl Optkeyr {
+            #[doc = "Unlock key option bytes"]
+            pub const fn optkeyr(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
             }
-            #[doc = "Bank 1 lowest secure protected address"]
-            pub fn set_sec_area_start(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
-            }
-            #[doc = "Bank 1 highest secure protected address"]
-            pub const fn sec_area_end(&self) -> u16 {
-                let val = (self.0 >> 16usize) & 0x0fff;
-                val as u16
-            }
-            #[doc = "Bank 1 highest secure protected address"]
-            pub fn set_sec_area_end(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize);
-            }
-            #[doc = "Bank 1 secure protected erase enable option status bit"]
-            pub const fn dmes(&self) -> bool {
-                let val = (self.0 >> 31usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Bank 1 secure protected erase enable option status bit"]
-            pub fn set_dmes(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
+            #[doc = "Unlock key option bytes"]
+            pub fn set_optkeyr(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
             }
         }
-        impl Default for ScarCur {
-            fn default() -> ScarCur {
-                ScarCur(0)
-            }
-        }
-        #[doc = "FLASH option status register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct OptsrPrg(pub u32);
-        impl OptsrPrg {
-            #[doc = "BOR reset level option configuration bits"]
-            pub const fn bor_lev(&self) -> u8 {
-                let val = (self.0 >> 2usize) & 0x03;
-                val as u8
-            }
-            #[doc = "BOR reset level option configuration bits"]
-            pub fn set_bor_lev(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 2usize)) | (((val as u32) & 0x03) << 2usize);
-            }
-            #[doc = "IWDG1 option configuration bit"]
-            pub const fn iwdg1_hw(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IWDG1 option configuration bit"]
-            pub fn set_iwdg1_hw(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "Option byte erase after D1 DStop option configuration bit"]
-            pub const fn n_rst_stop_d1(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Option byte erase after D1 DStop option configuration bit"]
-            pub fn set_n_rst_stop_d1(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "Option byte erase after D1 DStandby option configuration bit"]
-            pub const fn n_rst_stby_d1(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Option byte erase after D1 DStandby option configuration bit"]
-            pub fn set_n_rst_stby_d1(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Readout protection level option configuration byte"]
-            pub const fn rdp(&self) -> u8 {
-                let val = (self.0 >> 8usize) & 0xff;
-                val as u8
-            }
-            #[doc = "Readout protection level option configuration byte"]
-            pub fn set_rdp(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize);
-            }
-            #[doc = "IWDG Stop mode freeze option configuration bit"]
-            pub const fn fz_iwdg_stop(&self) -> bool {
-                let val = (self.0 >> 17usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IWDG Stop mode freeze option configuration bit"]
-            pub fn set_fz_iwdg_stop(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
-            }
-            #[doc = "IWDG Standby mode freeze option configuration bit"]
-            pub const fn fz_iwdg_sdby(&self) -> bool {
-                let val = (self.0 >> 18usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IWDG Standby mode freeze option configuration bit"]
-            pub fn set_fz_iwdg_sdby(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize);
-            }
-            #[doc = "DTCM size select option configuration bits"]
-            pub const fn st_ram_size(&self) -> u8 {
-                let val = (self.0 >> 19usize) & 0x03;
-                val as u8
-            }
-            #[doc = "DTCM size select option configuration bits"]
-            pub fn set_st_ram_size(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 19usize)) | (((val as u32) & 0x03) << 19usize);
-            }
-            #[doc = "Security option configuration bit"]
-            pub const fn security(&self) -> bool {
-                let val = (self.0 >> 21usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Security option configuration bit"]
-            pub fn set_security(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
-            }
-            #[doc = "User option configuration bit 1"]
-            pub const fn rss1(&self) -> bool {
-                let val = (self.0 >> 26usize) & 0x01;
-                val != 0
-            }
-            #[doc = "User option configuration bit 1"]
-            pub fn set_rss1(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
-            }
-            #[doc = "User option configuration bit 2"]
-            pub const fn rss2(&self) -> bool {
-                let val = (self.0 >> 27usize) & 0x01;
-                val != 0
-            }
-            #[doc = "User option configuration bit 2"]
-            pub fn set_rss2(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize);
-            }
-            #[doc = "I/O high-speed at low-voltage (PRODUCT_BELOW_25V)"]
-            pub const fn io_hslv(&self) -> bool {
-                let val = (self.0 >> 29usize) & 0x01;
-                val != 0
-            }
-            #[doc = "I/O high-speed at low-voltage (PRODUCT_BELOW_25V)"]
-            pub fn set_io_hslv(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize);
-            }
-            #[doc = "Bank swapping option configuration bit"]
-            pub const fn swap_bank_opt(&self) -> bool {
-                let val = (self.0 >> 31usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Bank swapping option configuration bit"]
-            pub fn set_swap_bank_opt(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
-            }
-        }
-        impl Default for OptsrPrg {
-            fn default() -> OptsrPrg {
-                OptsrPrg(0)
+        impl Default for Optkeyr {
+            fn default() -> Optkeyr {
+                Optkeyr(0)
             }
         }
         #[doc = "FLASH secure address for bank 1"]
@@ -24275,188 +16841,25 @@ pub mod flash_h7 {
                 ScarPrg(0)
             }
         }
-        #[doc = "FLASH protection address for bank 1"]
+        #[doc = "FLASH key register for bank 1"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct PrarCur(pub u32);
-        impl PrarCur {
-            #[doc = "Bank 1 lowest PCROP protected address"]
-            pub const fn prot_area_start(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x0fff;
-                val as u16
+        pub struct Keyr(pub u32);
+        impl Keyr {
+            #[doc = "Bank 1 access configuration unlock key"]
+            pub const fn keyr(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
             }
-            #[doc = "Bank 1 lowest PCROP protected address"]
-            pub fn set_prot_area_start(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
-            }
-            #[doc = "Bank 1 highest PCROP protected address"]
-            pub const fn prot_area_end(&self) -> u16 {
-                let val = (self.0 >> 16usize) & 0x0fff;
-                val as u16
-            }
-            #[doc = "Bank 1 highest PCROP protected address"]
-            pub fn set_prot_area_end(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize);
-            }
-            #[doc = "Bank 1 PCROP protected erase enable option status bit"]
-            pub const fn dmep(&self) -> bool {
-                let val = (self.0 >> 31usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Bank 1 PCROP protected erase enable option status bit"]
-            pub fn set_dmep(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
+            #[doc = "Bank 1 access configuration unlock key"]
+            pub fn set_keyr(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
             }
         }
-        impl Default for PrarCur {
-            fn default() -> PrarCur {
-                PrarCur(0)
-            }
-        }
-        #[doc = "FLASH option status register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct OptsrCur(pub u32);
-        impl OptsrCur {
-            #[doc = "Option byte change ongoing flag"]
-            pub const fn opt_busy(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Option byte change ongoing flag"]
-            pub fn set_opt_busy(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Brownout level option status bit"]
-            pub const fn bor_lev(&self) -> u8 {
-                let val = (self.0 >> 2usize) & 0x03;
-                val as u8
-            }
-            #[doc = "Brownout level option status bit"]
-            pub fn set_bor_lev(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 2usize)) | (((val as u32) & 0x03) << 2usize);
-            }
-            #[doc = "IWDG1 control option status bit"]
-            pub const fn iwdg1_hw(&self) -> bool {
-                let val = (self.0 >> 4usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IWDG1 control option status bit"]
-            pub fn set_iwdg1_hw(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
-            }
-            #[doc = "D1 DStop entry reset option status bit"]
-            pub const fn n_rst_stop_d1(&self) -> bool {
-                let val = (self.0 >> 6usize) & 0x01;
-                val != 0
-            }
-            #[doc = "D1 DStop entry reset option status bit"]
-            pub fn set_n_rst_stop_d1(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
-            }
-            #[doc = "D1 DStandby entry reset option status bit"]
-            pub const fn n_rst_stby_d1(&self) -> bool {
-                let val = (self.0 >> 7usize) & 0x01;
-                val != 0
-            }
-            #[doc = "D1 DStandby entry reset option status bit"]
-            pub fn set_n_rst_stby_d1(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
-            }
-            #[doc = "Readout protection level option status byte"]
-            pub const fn rdp(&self) -> u8 {
-                let val = (self.0 >> 8usize) & 0xff;
-                val as u8
-            }
-            #[doc = "Readout protection level option status byte"]
-            pub fn set_rdp(&mut self, val: u8) {
-                self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize);
-            }
-            #[doc = "IWDG Stop mode freeze option status bit"]
-            pub const fn fz_iwdg_stop(&self) -> bool {
-                let val = (self.0 >> 17usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IWDG Stop mode freeze option status bit"]
-            pub fn set_fz_iwdg_stop(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
-            }
-            #[doc = "IWDG Standby mode freeze option status bit"]
-            pub const fn fz_iwdg_sdby(&self) -> bool {
-                let val = (self.0 >> 18usize) & 0x01;
-                val != 0
-            }
-            #[doc = "IWDG Standby mode freeze option status bit"]
-            pub fn set_fz_iwdg_sdby(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize);
-            }
-            #[doc = "DTCM RAM size option status"]
-            pub const fn st_ram_size(&self) -> u8 {
-                let val = (self.0 >> 19usize) & 0x03;
-                val as u8
-            }
-            #[doc = "DTCM RAM size option status"]
-            pub fn set_st_ram_size(&mut self, val: u8) {
-                self.0 = (self.0 & !(0x03 << 19usize)) | (((val as u32) & 0x03) << 19usize);
-            }
-            #[doc = "Security enable option status bit"]
-            pub const fn security(&self) -> bool {
-                let val = (self.0 >> 21usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Security enable option status bit"]
-            pub fn set_security(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
-            }
-            #[doc = "User option bit 1"]
-            pub const fn rss1(&self) -> bool {
-                let val = (self.0 >> 26usize) & 0x01;
-                val != 0
-            }
-            #[doc = "User option bit 1"]
-            pub fn set_rss1(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
-            }
-            #[doc = "Device personalization status bit"]
-            pub const fn perso_ok(&self) -> bool {
-                let val = (self.0 >> 28usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Device personalization status bit"]
-            pub fn set_perso_ok(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 28usize)) | (((val as u32) & 0x01) << 28usize);
-            }
-            #[doc = "I/O high-speed at low-voltage status bit (PRODUCT_BELOW_25V)"]
-            pub const fn io_hslv(&self) -> bool {
-                let val = (self.0 >> 29usize) & 0x01;
-                val != 0
-            }
-            #[doc = "I/O high-speed at low-voltage status bit (PRODUCT_BELOW_25V)"]
-            pub fn set_io_hslv(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 29usize)) | (((val as u32) & 0x01) << 29usize);
-            }
-            #[doc = "Option byte change error flag"]
-            pub const fn optchangeerr(&self) -> bool {
-                let val = (self.0 >> 30usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Option byte change error flag"]
-            pub fn set_optchangeerr(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize);
-            }
-            #[doc = "Bank swapping option status bit"]
-            pub const fn swap_bank_opt(&self) -> bool {
-                let val = (self.0 >> 31usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Bank swapping option status bit"]
-            pub fn set_swap_bank_opt(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
-            }
-        }
-        impl Default for OptsrCur {
-            fn default() -> OptsrCur {
-                OptsrCur(0)
+        impl Default for Keyr {
+            fn default() -> Keyr {
+                Keyr(0)
             }
         }
         #[doc = "Access control register"]
@@ -24634,24 +17037,71 @@ pub mod flash_h7 {
                 Sr(0)
             }
         }
-        #[doc = "FLASH ECC fail address for bank 1"]
+        #[doc = "FLASH protection address for bank 1"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Far(pub u32);
-        impl Far {
-            #[doc = "Bank 1 ECC error address"]
-            pub const fn fail_ecc_addr(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0x7fff;
+        pub struct PrarCur(pub u32);
+        impl PrarCur {
+            #[doc = "Bank 1 lowest PCROP protected address"]
+            pub const fn prot_area_start(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x0fff;
                 val as u16
             }
-            #[doc = "Bank 1 ECC error address"]
-            pub fn set_fail_ecc_addr(&mut self, val: u16) {
-                self.0 = (self.0 & !(0x7fff << 0usize)) | (((val as u32) & 0x7fff) << 0usize);
+            #[doc = "Bank 1 lowest PCROP protected address"]
+            pub fn set_prot_area_start(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
+            }
+            #[doc = "Bank 1 highest PCROP protected address"]
+            pub const fn prot_area_end(&self) -> u16 {
+                let val = (self.0 >> 16usize) & 0x0fff;
+                val as u16
+            }
+            #[doc = "Bank 1 highest PCROP protected address"]
+            pub fn set_prot_area_end(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize);
+            }
+            #[doc = "Bank 1 PCROP protected erase enable option status bit"]
+            pub const fn dmep(&self) -> bool {
+                let val = (self.0 >> 31usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Bank 1 PCROP protected erase enable option status bit"]
+            pub fn set_dmep(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
             }
         }
-        impl Default for Far {
-            fn default() -> Far {
-                Far(0)
+        impl Default for PrarCur {
+            fn default() -> PrarCur {
+                PrarCur(0)
+            }
+        }
+        #[doc = "FLASH register with boot address"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct BootPrgr(pub u32);
+        impl BootPrgr {
+            #[doc = "Boot address 0"]
+            pub const fn boot_add0(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "Boot address 0"]
+            pub fn set_boot_add0(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+            #[doc = "Boot address 1"]
+            pub const fn boot_add1(&self) -> u16 {
+                let val = (self.0 >> 16usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "Boot address 1"]
+            pub fn set_boot_add1(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize);
+            }
+        }
+        impl Default for BootPrgr {
+            fn default() -> BootPrgr {
+                BootPrgr(0)
             }
         }
         #[doc = "FLASH write sector protection for bank 1"]
@@ -24674,24 +17124,42 @@ pub mod flash_h7 {
                 WpsnCurr(0)
             }
         }
-        #[doc = "FLASH option clear control register"]
+        #[doc = "FLASH secure address for bank 1"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Optccr(pub u32);
-        impl Optccr {
-            #[doc = "OPTCHANGEERR reset bit"]
-            pub const fn clr_optchangeerr(&self) -> bool {
-                let val = (self.0 >> 30usize) & 0x01;
+        pub struct ScarCur(pub u32);
+        impl ScarCur {
+            #[doc = "Bank 1 lowest secure protected address"]
+            pub const fn sec_area_start(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x0fff;
+                val as u16
+            }
+            #[doc = "Bank 1 lowest secure protected address"]
+            pub fn set_sec_area_start(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
+            }
+            #[doc = "Bank 1 highest secure protected address"]
+            pub const fn sec_area_end(&self) -> u16 {
+                let val = (self.0 >> 16usize) & 0x0fff;
+                val as u16
+            }
+            #[doc = "Bank 1 highest secure protected address"]
+            pub fn set_sec_area_end(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize);
+            }
+            #[doc = "Bank 1 secure protected erase enable option status bit"]
+            pub const fn dmes(&self) -> bool {
+                let val = (self.0 >> 31usize) & 0x01;
                 val != 0
             }
-            #[doc = "OPTCHANGEERR reset bit"]
-            pub fn set_clr_optchangeerr(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 30usize)) | (((val as u32) & 0x01) << 30usize);
+            #[doc = "Bank 1 secure protected erase enable option status bit"]
+            pub fn set_dmes(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
             }
         }
-        impl Default for Optccr {
-            fn default() -> Optccr {
-                Optccr(0)
+        impl Default for ScarCur {
+            fn default() -> ScarCur {
+                ScarCur(0)
             }
         }
         #[doc = "FLASH option control register"]
@@ -24750,54 +17218,718 @@ pub mod flash_h7 {
                 Optcr(0)
             }
         }
-        #[doc = "FLASH key register for bank 1"]
+        #[doc = "FLASH protection address for bank 1"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Keyr(pub u32);
-        impl Keyr {
-            #[doc = "Bank 1 access configuration unlock key"]
-            pub const fn keyr(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
+        pub struct PrarPrg(pub u32);
+        impl PrarPrg {
+            #[doc = "Bank 1 lowest PCROP protected address configuration"]
+            pub const fn prot_area_start(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x0fff;
+                val as u16
             }
-            #[doc = "Bank 1 access configuration unlock key"]
-            pub fn set_keyr(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            #[doc = "Bank 1 lowest PCROP protected address configuration"]
+            pub fn set_prot_area_start(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 0usize)) | (((val as u32) & 0x0fff) << 0usize);
+            }
+            #[doc = "Bank 1 highest PCROP protected address configuration"]
+            pub const fn prot_area_end(&self) -> u16 {
+                let val = (self.0 >> 16usize) & 0x0fff;
+                val as u16
+            }
+            #[doc = "Bank 1 highest PCROP protected address configuration"]
+            pub fn set_prot_area_end(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 16usize)) | (((val as u32) & 0x0fff) << 16usize);
+            }
+            #[doc = "Bank 1 PCROP protected erase enable option configuration bit"]
+            pub const fn dmep(&self) -> bool {
+                let val = (self.0 >> 31usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Bank 1 PCROP protected erase enable option configuration bit"]
+            pub fn set_dmep(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 31usize)) | (((val as u32) & 0x01) << 31usize);
             }
         }
-        impl Default for Keyr {
-            fn default() -> Keyr {
-                Keyr(0)
+        impl Default for PrarPrg {
+            fn default() -> PrarPrg {
+                PrarPrg(0)
             }
         }
-        #[doc = "FLASH register with boot address"]
+    }
+}
+pub mod spi_v2 {
+    use crate::generic::*;
+    #[doc = "Serial peripheral interface"]
+    #[derive(Copy, Clone)]
+    pub struct Spi(pub *mut u8);
+    unsafe impl Send for Spi {}
+    unsafe impl Sync for Spi {}
+    impl Spi {
+        #[doc = "control register 1"]
+        pub fn cr1(self) -> Reg<regs::Cr1, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "control register 2"]
+        pub fn cr2(self) -> Reg<regs::Cr2, RW> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "status register"]
+        pub fn sr(self) -> Reg<regs::Sr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        }
+        #[doc = "data register"]
+        pub fn dr(self) -> Reg<regs::Dr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(12usize)) }
+        }
+        #[doc = "CRC polynomial register"]
+        pub fn crcpr(self) -> Reg<regs::Crcpr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(16usize)) }
+        }
+        #[doc = "RX CRC register"]
+        pub fn rxcrcr(self) -> Reg<regs::Rxcrcr, R> {
+            unsafe { Reg::from_ptr(self.0.add(20usize)) }
+        }
+        #[doc = "TX CRC register"]
+        pub fn txcrcr(self) -> Reg<regs::Txcrcr, R> {
+            unsafe { Reg::from_ptr(self.0.add(24usize)) }
+        }
+    }
+    pub mod vals {
+        use crate::generic::*;
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct LdmaTx(pub u8);
+        impl LdmaTx {
+            #[doc = "Number of data to transfer for transmit is even"]
+            pub const EVEN: Self = Self(0);
+            #[doc = "Number of data to transfer for transmit is odd"]
+            pub const ODD: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct LdmaRx(pub u8);
+        impl LdmaRx {
+            #[doc = "Number of data to transfer for receive is even"]
+            pub const EVEN: Self = Self(0);
+            #[doc = "Number of data to transfer for receive is odd"]
+            pub const ODD: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Crcl(pub u8);
+        impl Crcl {
+            #[doc = "8-bit CRC length"]
+            pub const EIGHTBIT: Self = Self(0);
+            #[doc = "16-bit CRC length"]
+            pub const SIXTEENBIT: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Rxonly(pub u8);
+        impl Rxonly {
+            #[doc = "Full duplex (Transmit and receive)"]
+            pub const FULLDUPLEX: Self = Self(0);
+            #[doc = "Output disabled (Receive-only mode)"]
+            pub const OUTPUTDISABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lsbfirst(pub u8);
+        impl Lsbfirst {
+            #[doc = "Data is transmitted/received with the MSB first"]
+            pub const MSBFIRST: Self = Self(0);
+            #[doc = "Data is transmitted/received with the LSB first"]
+            pub const LSBFIRST: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ftlvlr(pub u8);
+        impl Ftlvlr {
+            #[doc = "Tx FIFO Empty"]
+            pub const EMPTY: Self = Self(0);
+            #[doc = "Tx 1/4 FIFO"]
+            pub const QUARTER: Self = Self(0x01);
+            #[doc = "Tx 1/2 FIFO"]
+            pub const HALF: Self = Self(0x02);
+            #[doc = "Tx FIFO full"]
+            pub const FULL: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Frlvlr(pub u8);
+        impl Frlvlr {
+            #[doc = "Rx FIFO Empty"]
+            pub const EMPTY: Self = Self(0);
+            #[doc = "Rx 1/4 FIFO"]
+            pub const QUARTER: Self = Self(0x01);
+            #[doc = "Rx 1/2 FIFO"]
+            pub const HALF: Self = Self(0x02);
+            #[doc = "Rx FIFO full"]
+            pub const FULL: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Cpol(pub u8);
+        impl Cpol {
+            #[doc = "CK to 0 when idle"]
+            pub const IDLELOW: Self = Self(0);
+            #[doc = "CK to 1 when idle"]
+            pub const IDLEHIGH: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Bidimode(pub u8);
+        impl Bidimode {
+            #[doc = "2-line unidirectional data mode selected"]
+            pub const UNIDIRECTIONAL: Self = Self(0);
+            #[doc = "1-line bidirectional data mode selected"]
+            pub const BIDIRECTIONAL: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ds(pub u8);
+        impl Ds {
+            #[doc = "4-bit"]
+            pub const FOURBIT: Self = Self(0x03);
+            #[doc = "5-bit"]
+            pub const FIVEBIT: Self = Self(0x04);
+            #[doc = "6-bit"]
+            pub const SIXBIT: Self = Self(0x05);
+            #[doc = "7-bit"]
+            pub const SEVENBIT: Self = Self(0x06);
+            #[doc = "8-bit"]
+            pub const EIGHTBIT: Self = Self(0x07);
+            #[doc = "9-bit"]
+            pub const NINEBIT: Self = Self(0x08);
+            #[doc = "10-bit"]
+            pub const TENBIT: Self = Self(0x09);
+            #[doc = "11-bit"]
+            pub const ELEVENBIT: Self = Self(0x0a);
+            #[doc = "12-bit"]
+            pub const TWELVEBIT: Self = Self(0x0b);
+            #[doc = "13-bit"]
+            pub const THIRTEENBIT: Self = Self(0x0c);
+            #[doc = "14-bit"]
+            pub const FOURTEENBIT: Self = Self(0x0d);
+            #[doc = "15-bit"]
+            pub const FIFTEENBIT: Self = Self(0x0e);
+            #[doc = "16-bit"]
+            pub const SIXTEENBIT: Self = Self(0x0f);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Crcnext(pub u8);
+        impl Crcnext {
+            #[doc = "Next transmit value is from Tx buffer"]
+            pub const TXBUFFER: Self = Self(0);
+            #[doc = "Next transmit value is from Tx CRC register"]
+            pub const CRC: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Frer(pub u8);
+        impl Frer {
+            #[doc = "No frame format error"]
+            pub const NOERROR: Self = Self(0);
+            #[doc = "A frame format error occurred"]
+            pub const ERROR: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Mstr(pub u8);
+        impl Mstr {
+            #[doc = "Slave configuration"]
+            pub const SLAVE: Self = Self(0);
+            #[doc = "Master configuration"]
+            pub const MASTER: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Br(pub u8);
+        impl Br {
+            #[doc = "f_PCLK / 2"]
+            pub const DIV2: Self = Self(0);
+            #[doc = "f_PCLK / 4"]
+            pub const DIV4: Self = Self(0x01);
+            #[doc = "f_PCLK / 8"]
+            pub const DIV8: Self = Self(0x02);
+            #[doc = "f_PCLK / 16"]
+            pub const DIV16: Self = Self(0x03);
+            #[doc = "f_PCLK / 32"]
+            pub const DIV32: Self = Self(0x04);
+            #[doc = "f_PCLK / 64"]
+            pub const DIV64: Self = Self(0x05);
+            #[doc = "f_PCLK / 128"]
+            pub const DIV128: Self = Self(0x06);
+            #[doc = "f_PCLK / 256"]
+            pub const DIV256: Self = Self(0x07);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Cpha(pub u8);
+        impl Cpha {
+            #[doc = "The first clock transition is the first data capture edge"]
+            pub const FIRSTEDGE: Self = Self(0);
+            #[doc = "The second clock transition is the first data capture edge"]
+            pub const SECONDEDGE: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Frf(pub u8);
+        impl Frf {
+            #[doc = "SPI Motorola mode"]
+            pub const MOTOROLA: Self = Self(0);
+            #[doc = "SPI TI mode"]
+            pub const TI: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Frxth(pub u8);
+        impl Frxth {
+            #[doc = "RXNE event is generated if the FIFO level is greater than or equal to 1/2 (16-bit)"]
+            pub const HALF: Self = Self(0);
+            #[doc = "RXNE event is generated if the FIFO level is greater than or equal to 1/4 (8-bit)"]
+            pub const QUARTER: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Bidioe(pub u8);
+        impl Bidioe {
+            #[doc = "Output disabled (receive-only mode)"]
+            pub const OUTPUTDISABLED: Self = Self(0);
+            #[doc = "Output enabled (transmit-only mode)"]
+            pub const OUTPUTENABLED: Self = Self(0x01);
+        }
+    }
+    pub mod regs {
+        use crate::generic::*;
+        #[doc = "RX CRC register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct BootPrgr(pub u32);
-        impl BootPrgr {
-            #[doc = "Boot address 0"]
-            pub const fn boot_add0(&self) -> u16 {
+        pub struct Rxcrcr(pub u32);
+        impl Rxcrcr {
+            #[doc = "Rx CRC register"]
+            pub const fn rx_crc(&self) -> u16 {
                 let val = (self.0 >> 0usize) & 0xffff;
                 val as u16
             }
-            #[doc = "Boot address 0"]
-            pub fn set_boot_add0(&mut self, val: u16) {
+            #[doc = "Rx CRC register"]
+            pub fn set_rx_crc(&mut self, val: u16) {
                 self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
             }
-            #[doc = "Boot address 1"]
-            pub const fn boot_add1(&self) -> u16 {
-                let val = (self.0 >> 16usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "Boot address 1"]
-            pub fn set_boot_add1(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize);
+        }
+        impl Default for Rxcrcr {
+            fn default() -> Rxcrcr {
+                Rxcrcr(0)
             }
         }
-        impl Default for BootPrgr {
-            fn default() -> BootPrgr {
-                BootPrgr(0)
+        #[doc = "CRC polynomial register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Crcpr(pub u32);
+        impl Crcpr {
+            #[doc = "CRC polynomial register"]
+            pub const fn crcpoly(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "CRC polynomial register"]
+            pub fn set_crcpoly(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+        }
+        impl Default for Crcpr {
+            fn default() -> Crcpr {
+                Crcpr(0)
+            }
+        }
+        #[doc = "control register 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr1(pub u32);
+        impl Cr1 {
+            #[doc = "Clock phase"]
+            pub const fn cpha(&self) -> super::vals::Cpha {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Cpha(val as u8)
+            }
+            #[doc = "Clock phase"]
+            pub fn set_cpha(&mut self, val: super::vals::Cpha) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Clock polarity"]
+            pub const fn cpol(&self) -> super::vals::Cpol {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Cpol(val as u8)
+            }
+            #[doc = "Clock polarity"]
+            pub fn set_cpol(&mut self, val: super::vals::Cpol) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Master selection"]
+            pub const fn mstr(&self) -> super::vals::Mstr {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Mstr(val as u8)
+            }
+            #[doc = "Master selection"]
+            pub fn set_mstr(&mut self, val: super::vals::Mstr) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Baud rate control"]
+            pub const fn br(&self) -> super::vals::Br {
+                let val = (self.0 >> 3usize) & 0x07;
+                super::vals::Br(val as u8)
+            }
+            #[doc = "Baud rate control"]
+            pub fn set_br(&mut self, val: super::vals::Br) {
+                self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize);
+            }
+            #[doc = "SPI enable"]
+            pub const fn spe(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "SPI enable"]
+            pub fn set_spe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Frame format"]
+            pub const fn lsbfirst(&self) -> super::vals::Lsbfirst {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Lsbfirst(val as u8)
+            }
+            #[doc = "Frame format"]
+            pub fn set_lsbfirst(&mut self, val: super::vals::Lsbfirst) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Internal slave select"]
+            pub const fn ssi(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Internal slave select"]
+            pub fn set_ssi(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Software slave management"]
+            pub const fn ssm(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Software slave management"]
+            pub fn set_ssm(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "Receive only"]
+            pub const fn rxonly(&self) -> super::vals::Rxonly {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::Rxonly(val as u8)
+            }
+            #[doc = "Receive only"]
+            pub fn set_rxonly(&mut self, val: super::vals::Rxonly) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "CRC length"]
+            pub const fn crcl(&self) -> super::vals::Crcl {
+                let val = (self.0 >> 11usize) & 0x01;
+                super::vals::Crcl(val as u8)
+            }
+            #[doc = "CRC length"]
+            pub fn set_crcl(&mut self, val: super::vals::Crcl) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
+            }
+            #[doc = "CRC transfer next"]
+            pub const fn crcnext(&self) -> super::vals::Crcnext {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Crcnext(val as u8)
+            }
+            #[doc = "CRC transfer next"]
+            pub fn set_crcnext(&mut self, val: super::vals::Crcnext) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "Hardware CRC calculation enable"]
+            pub const fn crcen(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Hardware CRC calculation enable"]
+            pub fn set_crcen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+            #[doc = "Output enable in bidirectional mode"]
+            pub const fn bidioe(&self) -> super::vals::Bidioe {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Bidioe(val as u8)
+            }
+            #[doc = "Output enable in bidirectional mode"]
+            pub fn set_bidioe(&mut self, val: super::vals::Bidioe) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "Bidirectional data mode enable"]
+            pub const fn bidimode(&self) -> super::vals::Bidimode {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Bidimode(val as u8)
+            }
+            #[doc = "Bidirectional data mode enable"]
+            pub fn set_bidimode(&mut self, val: super::vals::Bidimode) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+        }
+        impl Default for Cr1 {
+            fn default() -> Cr1 {
+                Cr1(0)
+            }
+        }
+        #[doc = "control register 2"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr2(pub u32);
+        impl Cr2 {
+            #[doc = "Rx buffer DMA enable"]
+            pub const fn rxdmaen(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Rx buffer DMA enable"]
+            pub fn set_rxdmaen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Tx buffer DMA enable"]
+            pub const fn txdmaen(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Tx buffer DMA enable"]
+            pub fn set_txdmaen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "SS output enable"]
+            pub const fn ssoe(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "SS output enable"]
+            pub fn set_ssoe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "NSS pulse management"]
+            pub const fn nssp(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "NSS pulse management"]
+            pub fn set_nssp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Frame format"]
+            pub const fn frf(&self) -> super::vals::Frf {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Frf(val as u8)
+            }
+            #[doc = "Frame format"]
+            pub fn set_frf(&mut self, val: super::vals::Frf) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Error interrupt enable"]
+            pub const fn errie(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Error interrupt enable"]
+            pub fn set_errie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "RX buffer not empty interrupt enable"]
+            pub const fn rxneie(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "RX buffer not empty interrupt enable"]
+            pub fn set_rxneie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Tx buffer empty interrupt enable"]
+            pub const fn txeie(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Tx buffer empty interrupt enable"]
+            pub fn set_txeie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Data size"]
+            pub const fn ds(&self) -> super::vals::Ds {
+                let val = (self.0 >> 8usize) & 0x0f;
+                super::vals::Ds(val as u8)
+            }
+            #[doc = "Data size"]
+            pub fn set_ds(&mut self, val: super::vals::Ds) {
+                self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize);
+            }
+            #[doc = "FIFO reception threshold"]
+            pub const fn frxth(&self) -> super::vals::Frxth {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Frxth(val as u8)
+            }
+            #[doc = "FIFO reception threshold"]
+            pub fn set_frxth(&mut self, val: super::vals::Frxth) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "Last DMA transfer for reception"]
+            pub const fn ldma_rx(&self) -> super::vals::LdmaRx {
+                let val = (self.0 >> 13usize) & 0x01;
+                super::vals::LdmaRx(val as u8)
+            }
+            #[doc = "Last DMA transfer for reception"]
+            pub fn set_ldma_rx(&mut self, val: super::vals::LdmaRx) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize);
+            }
+            #[doc = "Last DMA transfer for transmission"]
+            pub const fn ldma_tx(&self) -> super::vals::LdmaTx {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::LdmaTx(val as u8)
+            }
+            #[doc = "Last DMA transfer for transmission"]
+            pub fn set_ldma_tx(&mut self, val: super::vals::LdmaTx) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+        }
+        impl Default for Cr2 {
+            fn default() -> Cr2 {
+                Cr2(0)
+            }
+        }
+        #[doc = "status register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Sr(pub u32);
+        impl Sr {
+            #[doc = "Receive buffer not empty"]
+            pub const fn rxne(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Receive buffer not empty"]
+            pub fn set_rxne(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Transmit buffer empty"]
+            pub const fn txe(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transmit buffer empty"]
+            pub fn set_txe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "CRC error flag"]
+            pub const fn crcerr(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CRC error flag"]
+            pub fn set_crcerr(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Mode fault"]
+            pub const fn modf(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Mode fault"]
+            pub fn set_modf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Overrun flag"]
+            pub const fn ovr(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Overrun flag"]
+            pub fn set_ovr(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Busy flag"]
+            pub const fn bsy(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Busy flag"]
+            pub fn set_bsy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Frame format error"]
+            pub const fn fre(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Frame format error"]
+            pub fn set_fre(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "FIFO reception level"]
+            pub const fn frlvl(&self) -> u8 {
+                let val = (self.0 >> 9usize) & 0x03;
+                val as u8
+            }
+            #[doc = "FIFO reception level"]
+            pub fn set_frlvl(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 9usize)) | (((val as u32) & 0x03) << 9usize);
+            }
+            #[doc = "FIFO Transmission Level"]
+            pub const fn ftlvl(&self) -> u8 {
+                let val = (self.0 >> 11usize) & 0x03;
+                val as u8
+            }
+            #[doc = "FIFO Transmission Level"]
+            pub fn set_ftlvl(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 11usize)) | (((val as u32) & 0x03) << 11usize);
+            }
+        }
+        impl Default for Sr {
+            fn default() -> Sr {
+                Sr(0)
+            }
+        }
+        #[doc = "TX CRC register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Txcrcr(pub u32);
+        impl Txcrcr {
+            #[doc = "Tx CRC register"]
+            pub const fn tx_crc(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "Tx CRC register"]
+            pub fn set_tx_crc(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+        }
+        impl Default for Txcrcr {
+            fn default() -> Txcrcr {
+                Txcrcr(0)
+            }
+        }
+        #[doc = "data register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Dr(pub u32);
+        impl Dr {
+            #[doc = "Data register"]
+            pub const fn dr(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "Data register"]
+            pub fn set_dr(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+        }
+        impl Default for Dr {
+            fn default() -> Dr {
+                Dr(0)
             }
         }
     }
@@ -24830,6 +17962,89 @@ pub mod syscfg_l0 {
     }
     pub mod regs {
         use crate::generic::*;
+        #[doc = "CFGR2"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cfgr2(pub u32);
+        impl Cfgr2 {
+            #[doc = "Firewall disable bit"]
+            pub const fn fwdis(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Firewall disable bit"]
+            pub fn set_fwdis(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Fm+ drive capability on PB6 enable bit"]
+            pub const fn i2c_pb6_fmp(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Fm+ drive capability on PB6 enable bit"]
+            pub fn set_i2c_pb6_fmp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Fm+ drive capability on PB7 enable bit"]
+            pub const fn i2c_pb7_fmp(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Fm+ drive capability on PB7 enable bit"]
+            pub fn set_i2c_pb7_fmp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "Fm+ drive capability on PB8 enable bit"]
+            pub const fn i2c_pb8_fmp(&self) -> bool {
+                let val = (self.0 >> 10usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Fm+ drive capability on PB8 enable bit"]
+            pub fn set_i2c_pb8_fmp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            }
+            #[doc = "Fm+ drive capability on PB9 enable bit"]
+            pub const fn i2c_pb9_fmp(&self) -> bool {
+                let val = (self.0 >> 11usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Fm+ drive capability on PB9 enable bit"]
+            pub fn set_i2c_pb9_fmp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
+            }
+            #[doc = "I2C1 Fm+ drive capability enable bit"]
+            pub const fn i2c1_fmp(&self) -> bool {
+                let val = (self.0 >> 12usize) & 0x01;
+                val != 0
+            }
+            #[doc = "I2C1 Fm+ drive capability enable bit"]
+            pub fn set_i2c1_fmp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
+            }
+            #[doc = "I2C2 Fm+ drive capability enable bit"]
+            pub const fn i2c2_fmp(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "I2C2 Fm+ drive capability enable bit"]
+            pub fn set_i2c2_fmp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+            #[doc = "I2C3 Fm+ drive capability enable bit"]
+            pub const fn i2c3_fmp(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "I2C3 Fm+ drive capability enable bit"]
+            pub fn set_i2c3_fmp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+        }
+        impl Default for Cfgr2 {
+            fn default() -> Cfgr2 {
+                Cfgr2(0)
+            }
+        }
         #[doc = "external interrupt configuration register 1-4"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -24937,89 +18152,6 @@ pub mod syscfg_l0 {
                 Cfgr3(0)
             }
         }
-        #[doc = "CFGR2"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cfgr2(pub u32);
-        impl Cfgr2 {
-            #[doc = "Firewall disable bit"]
-            pub const fn fwdis(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Firewall disable bit"]
-            pub fn set_fwdis(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Fm+ drive capability on PB6 enable bit"]
-            pub const fn i2c_pb6_fmp(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Fm+ drive capability on PB6 enable bit"]
-            pub fn set_i2c_pb6_fmp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Fm+ drive capability on PB7 enable bit"]
-            pub const fn i2c_pb7_fmp(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Fm+ drive capability on PB7 enable bit"]
-            pub fn set_i2c_pb7_fmp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "Fm+ drive capability on PB8 enable bit"]
-            pub const fn i2c_pb8_fmp(&self) -> bool {
-                let val = (self.0 >> 10usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Fm+ drive capability on PB8 enable bit"]
-            pub fn set_i2c_pb8_fmp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
-            }
-            #[doc = "Fm+ drive capability on PB9 enable bit"]
-            pub const fn i2c_pb9_fmp(&self) -> bool {
-                let val = (self.0 >> 11usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Fm+ drive capability on PB9 enable bit"]
-            pub fn set_i2c_pb9_fmp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
-            }
-            #[doc = "I2C1 Fm+ drive capability enable bit"]
-            pub const fn i2c1_fmp(&self) -> bool {
-                let val = (self.0 >> 12usize) & 0x01;
-                val != 0
-            }
-            #[doc = "I2C1 Fm+ drive capability enable bit"]
-            pub fn set_i2c1_fmp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
-            }
-            #[doc = "I2C2 Fm+ drive capability enable bit"]
-            pub const fn i2c2_fmp(&self) -> bool {
-                let val = (self.0 >> 13usize) & 0x01;
-                val != 0
-            }
-            #[doc = "I2C2 Fm+ drive capability enable bit"]
-            pub fn set_i2c2_fmp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
-            }
-            #[doc = "I2C3 Fm+ drive capability enable bit"]
-            pub const fn i2c3_fmp(&self) -> bool {
-                let val = (self.0 >> 14usize) & 0x01;
-                val != 0
-            }
-            #[doc = "I2C3 Fm+ drive capability enable bit"]
-            pub fn set_i2c3_fmp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
-            }
-        }
-        impl Default for Cfgr2 {
-            fn default() -> Cfgr2 {
-                Cfgr2(0)
-            }
-        }
         #[doc = "configuration register 1"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -25060,6 +18192,5401 @@ pub mod syscfg_l0 {
         }
     }
 }
+pub mod usart_v1 {
+    use crate::generic::*;
+    #[doc = "Universal asynchronous receiver transmitter"]
+    #[derive(Copy, Clone)]
+    pub struct Uart(pub *mut u8);
+    unsafe impl Send for Uart {}
+    unsafe impl Sync for Uart {}
+    impl Uart {
+        #[doc = "Status register"]
+        pub fn sr(self) -> Reg<regs::Sr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "Data register"]
+        pub fn dr(self) -> Reg<regs::Dr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "Baud rate register"]
+        pub fn brr(self) -> Reg<regs::Brr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        }
+        #[doc = "Control register 1"]
+        pub fn cr1(self) -> Reg<regs::Cr1, RW> {
+            unsafe { Reg::from_ptr(self.0.add(12usize)) }
+        }
+        #[doc = "Control register 2"]
+        pub fn cr2(self) -> Reg<regs::Cr2, RW> {
+            unsafe { Reg::from_ptr(self.0.add(16usize)) }
+        }
+        #[doc = "Control register 3"]
+        pub fn cr3(self) -> Reg<regs::Cr3, RW> {
+            unsafe { Reg::from_ptr(self.0.add(20usize)) }
+        }
+    }
+    #[doc = "Universal synchronous asynchronous receiver transmitter"]
+    #[derive(Copy, Clone)]
+    pub struct Usart(pub *mut u8);
+    unsafe impl Send for Usart {}
+    unsafe impl Sync for Usart {}
+    impl Usart {
+        #[doc = "Status register"]
+        pub fn sr(self) -> Reg<regs::Sr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "Data register"]
+        pub fn dr(self) -> Reg<regs::Dr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "Baud rate register"]
+        pub fn brr(self) -> Reg<regs::Brr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        }
+        #[doc = "Control register 1"]
+        pub fn cr1(self) -> Reg<regs::Cr1, RW> {
+            unsafe { Reg::from_ptr(self.0.add(12usize)) }
+        }
+        #[doc = "Control register 2"]
+        pub fn cr2(self) -> Reg<regs::Cr2Usart, RW> {
+            unsafe { Reg::from_ptr(self.0.add(16usize)) }
+        }
+        #[doc = "Control register 3"]
+        pub fn cr3(self) -> Reg<regs::Cr3Usart, RW> {
+            unsafe { Reg::from_ptr(self.0.add(20usize)) }
+        }
+        #[doc = "Guard time and prescaler register"]
+        pub fn gtpr(self) -> Reg<regs::Gtpr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(24usize)) }
+        }
+    }
+    pub mod regs {
+        use crate::generic::*;
+        #[doc = "Control register 2"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr2(pub u32);
+        impl Cr2 {
+            #[doc = "Address of the USART node"]
+            pub const fn add(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0x0f;
+                val as u8
+            }
+            #[doc = "Address of the USART node"]
+            pub fn set_add(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize);
+            }
+            #[doc = "lin break detection length"]
+            pub const fn lbdl(&self) -> super::vals::Lbdl {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Lbdl(val as u8)
+            }
+            #[doc = "lin break detection length"]
+            pub fn set_lbdl(&mut self, val: super::vals::Lbdl) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "LIN break detection interrupt enable"]
+            pub const fn lbdie(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LIN break detection interrupt enable"]
+            pub fn set_lbdie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "STOP bits"]
+            pub const fn stop(&self) -> super::vals::Stop {
+                let val = (self.0 >> 12usize) & 0x03;
+                super::vals::Stop(val as u8)
+            }
+            #[doc = "STOP bits"]
+            pub fn set_stop(&mut self, val: super::vals::Stop) {
+                self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize);
+            }
+            #[doc = "LIN mode enable"]
+            pub const fn linen(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LIN mode enable"]
+            pub fn set_linen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+        }
+        impl Default for Cr2 {
+            fn default() -> Cr2 {
+                Cr2(0)
+            }
+        }
+        #[doc = "Guard time and prescaler register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Gtpr(pub u32);
+        impl Gtpr {
+            #[doc = "Prescaler value"]
+            pub const fn psc(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Prescaler value"]
+            pub fn set_psc(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
+            }
+            #[doc = "Guard time value"]
+            pub const fn gt(&self) -> u8 {
+                let val = (self.0 >> 8usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Guard time value"]
+            pub fn set_gt(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize);
+            }
+        }
+        impl Default for Gtpr {
+            fn default() -> Gtpr {
+                Gtpr(0)
+            }
+        }
+        #[doc = "Data register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Dr(pub u32);
+        impl Dr {
+            #[doc = "Data value"]
+            pub const fn dr(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x01ff;
+                val as u16
+            }
+            #[doc = "Data value"]
+            pub fn set_dr(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize);
+            }
+        }
+        impl Default for Dr {
+            fn default() -> Dr {
+                Dr(0)
+            }
+        }
+        #[doc = "Control register 2"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr2Usart(pub u32);
+        impl Cr2Usart {
+            #[doc = "Address of the USART node"]
+            pub const fn add(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0x0f;
+                val as u8
+            }
+            #[doc = "Address of the USART node"]
+            pub fn set_add(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize);
+            }
+            #[doc = "lin break detection length"]
+            pub const fn lbdl(&self) -> super::vals::Lbdl {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Lbdl(val as u8)
+            }
+            #[doc = "lin break detection length"]
+            pub fn set_lbdl(&mut self, val: super::vals::Lbdl) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "LIN break detection interrupt enable"]
+            pub const fn lbdie(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LIN break detection interrupt enable"]
+            pub fn set_lbdie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Last bit clock pulse"]
+            pub const fn lbcl(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Last bit clock pulse"]
+            pub fn set_lbcl(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Clock phase"]
+            pub const fn cpha(&self) -> super::vals::Cpha {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Cpha(val as u8)
+            }
+            #[doc = "Clock phase"]
+            pub fn set_cpha(&mut self, val: super::vals::Cpha) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "Clock polarity"]
+            pub const fn cpol(&self) -> super::vals::Cpol {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::Cpol(val as u8)
+            }
+            #[doc = "Clock polarity"]
+            pub fn set_cpol(&mut self, val: super::vals::Cpol) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "Clock enable"]
+            pub const fn clken(&self) -> bool {
+                let val = (self.0 >> 11usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Clock enable"]
+            pub fn set_clken(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
+            }
+            #[doc = "STOP bits"]
+            pub const fn stop(&self) -> super::vals::Stop {
+                let val = (self.0 >> 12usize) & 0x03;
+                super::vals::Stop(val as u8)
+            }
+            #[doc = "STOP bits"]
+            pub fn set_stop(&mut self, val: super::vals::Stop) {
+                self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize);
+            }
+            #[doc = "LIN mode enable"]
+            pub const fn linen(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LIN mode enable"]
+            pub fn set_linen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+        }
+        impl Default for Cr2Usart {
+            fn default() -> Cr2Usart {
+                Cr2Usart(0)
+            }
+        }
+        #[doc = "Control register 3"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr3Usart(pub u32);
+        impl Cr3Usart {
+            #[doc = "Error interrupt enable"]
+            pub const fn eie(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Error interrupt enable"]
+            pub fn set_eie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "IrDA mode enable"]
+            pub const fn iren(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IrDA mode enable"]
+            pub fn set_iren(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "IrDA low-power"]
+            pub const fn irlp(&self) -> super::vals::Irlp {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Irlp(val as u8)
+            }
+            #[doc = "IrDA low-power"]
+            pub fn set_irlp(&mut self, val: super::vals::Irlp) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Half-duplex selection"]
+            pub const fn hdsel(&self) -> super::vals::Hdsel {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Hdsel(val as u8)
+            }
+            #[doc = "Half-duplex selection"]
+            pub fn set_hdsel(&mut self, val: super::vals::Hdsel) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Smartcard NACK enable"]
+            pub const fn nack(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Smartcard NACK enable"]
+            pub fn set_nack(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Smartcard mode enable"]
+            pub const fn scen(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Smartcard mode enable"]
+            pub fn set_scen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "DMA enable receiver"]
+            pub const fn dmar(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DMA enable receiver"]
+            pub fn set_dmar(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "DMA enable transmitter"]
+            pub const fn dmat(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DMA enable transmitter"]
+            pub fn set_dmat(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "RTS enable"]
+            pub const fn rtse(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "RTS enable"]
+            pub fn set_rtse(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "CTS enable"]
+            pub const fn ctse(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CTS enable"]
+            pub fn set_ctse(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "CTS interrupt enable"]
+            pub const fn ctsie(&self) -> bool {
+                let val = (self.0 >> 10usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CTS interrupt enable"]
+            pub fn set_ctsie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            }
+        }
+        impl Default for Cr3Usart {
+            fn default() -> Cr3Usart {
+                Cr3Usart(0)
+            }
+        }
+        #[doc = "Status register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Sr(pub u32);
+        impl Sr {
+            #[doc = "Parity error"]
+            pub const fn pe(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Parity error"]
+            pub fn set_pe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Framing error"]
+            pub const fn fe(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Framing error"]
+            pub fn set_fe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Noise error flag"]
+            pub const fn ne(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Noise error flag"]
+            pub fn set_ne(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Overrun error"]
+            pub const fn ore(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Overrun error"]
+            pub fn set_ore(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "IDLE line detected"]
+            pub const fn idle(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IDLE line detected"]
+            pub fn set_idle(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Read data register not empty"]
+            pub const fn rxne(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Read data register not empty"]
+            pub fn set_rxne(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Transmission complete"]
+            pub const fn tc(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transmission complete"]
+            pub fn set_tc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Transmit data register empty"]
+            pub const fn txe(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transmit data register empty"]
+            pub fn set_txe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "LIN break detection flag"]
+            pub const fn lbd(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LIN break detection flag"]
+            pub fn set_lbd(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+        }
+        impl Default for Sr {
+            fn default() -> Sr {
+                Sr(0)
+            }
+        }
+        #[doc = "Status register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct SrUsart(pub u32);
+        impl SrUsart {
+            #[doc = "Parity error"]
+            pub const fn pe(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Parity error"]
+            pub fn set_pe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Framing error"]
+            pub const fn fe(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Framing error"]
+            pub fn set_fe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Noise error flag"]
+            pub const fn ne(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Noise error flag"]
+            pub fn set_ne(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Overrun error"]
+            pub const fn ore(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Overrun error"]
+            pub fn set_ore(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "IDLE line detected"]
+            pub const fn idle(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IDLE line detected"]
+            pub fn set_idle(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Read data register not empty"]
+            pub const fn rxne(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Read data register not empty"]
+            pub fn set_rxne(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Transmission complete"]
+            pub const fn tc(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transmission complete"]
+            pub fn set_tc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Transmit data register empty"]
+            pub const fn txe(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transmit data register empty"]
+            pub fn set_txe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "LIN break detection flag"]
+            pub const fn lbd(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LIN break detection flag"]
+            pub fn set_lbd(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "CTS flag"]
+            pub const fn cts(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CTS flag"]
+            pub fn set_cts(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+        }
+        impl Default for SrUsart {
+            fn default() -> SrUsart {
+                SrUsart(0)
+            }
+        }
+        #[doc = "Control register 3"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr3(pub u32);
+        impl Cr3 {
+            #[doc = "Error interrupt enable"]
+            pub const fn eie(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Error interrupt enable"]
+            pub fn set_eie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "IrDA mode enable"]
+            pub const fn iren(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IrDA mode enable"]
+            pub fn set_iren(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "IrDA low-power"]
+            pub const fn irlp(&self) -> super::vals::Irlp {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Irlp(val as u8)
+            }
+            #[doc = "IrDA low-power"]
+            pub fn set_irlp(&mut self, val: super::vals::Irlp) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Half-duplex selection"]
+            pub const fn hdsel(&self) -> super::vals::Hdsel {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Hdsel(val as u8)
+            }
+            #[doc = "Half-duplex selection"]
+            pub fn set_hdsel(&mut self, val: super::vals::Hdsel) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "DMA enable receiver"]
+            pub const fn dmar(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DMA enable receiver"]
+            pub fn set_dmar(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "DMA enable transmitter"]
+            pub const fn dmat(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DMA enable transmitter"]
+            pub fn set_dmat(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+        }
+        impl Default for Cr3 {
+            fn default() -> Cr3 {
+                Cr3(0)
+            }
+        }
+        #[doc = "Control register 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr1(pub u32);
+        impl Cr1 {
+            #[doc = "Send break"]
+            pub const fn sbk(&self) -> super::vals::Sbk {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Sbk(val as u8)
+            }
+            #[doc = "Send break"]
+            pub fn set_sbk(&mut self, val: super::vals::Sbk) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Receiver wakeup"]
+            pub const fn rwu(&self) -> super::vals::Rwu {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Rwu(val as u8)
+            }
+            #[doc = "Receiver wakeup"]
+            pub fn set_rwu(&mut self, val: super::vals::Rwu) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Receiver enable"]
+            pub const fn re(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Receiver enable"]
+            pub fn set_re(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Transmitter enable"]
+            pub const fn te(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transmitter enable"]
+            pub fn set_te(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "IDLE interrupt enable"]
+            pub const fn idleie(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IDLE interrupt enable"]
+            pub fn set_idleie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "RXNE interrupt enable"]
+            pub const fn rxneie(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "RXNE interrupt enable"]
+            pub fn set_rxneie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Transmission complete interrupt enable"]
+            pub const fn tcie(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transmission complete interrupt enable"]
+            pub fn set_tcie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "TXE interrupt enable"]
+            pub const fn txeie(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "TXE interrupt enable"]
+            pub fn set_txeie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "PE interrupt enable"]
+            pub const fn peie(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "PE interrupt enable"]
+            pub fn set_peie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Parity selection"]
+            pub const fn ps(&self) -> super::vals::Ps {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Ps(val as u8)
+            }
+            #[doc = "Parity selection"]
+            pub fn set_ps(&mut self, val: super::vals::Ps) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "Parity control enable"]
+            pub const fn pce(&self) -> bool {
+                let val = (self.0 >> 10usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Parity control enable"]
+            pub fn set_pce(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            }
+            #[doc = "Wakeup method"]
+            pub const fn wake(&self) -> super::vals::Wake {
+                let val = (self.0 >> 11usize) & 0x01;
+                super::vals::Wake(val as u8)
+            }
+            #[doc = "Wakeup method"]
+            pub fn set_wake(&mut self, val: super::vals::Wake) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
+            }
+            #[doc = "Word length"]
+            pub const fn m(&self) -> super::vals::M {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::M(val as u8)
+            }
+            #[doc = "Word length"]
+            pub fn set_m(&mut self, val: super::vals::M) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "USART enable"]
+            pub const fn ue(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "USART enable"]
+            pub fn set_ue(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+        }
+        impl Default for Cr1 {
+            fn default() -> Cr1 {
+                Cr1(0)
+            }
+        }
+        #[doc = "Baud rate register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Brr(pub u32);
+        impl Brr {
+            #[doc = "fraction of USARTDIV"]
+            pub const fn div_fraction(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0x0f;
+                val as u8
+            }
+            #[doc = "fraction of USARTDIV"]
+            pub fn set_div_fraction(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x0f << 0usize)) | (((val as u32) & 0x0f) << 0usize);
+            }
+            #[doc = "mantissa of USARTDIV"]
+            pub const fn div_mantissa(&self) -> u16 {
+                let val = (self.0 >> 4usize) & 0x0fff;
+                val as u16
+            }
+            #[doc = "mantissa of USARTDIV"]
+            pub fn set_div_mantissa(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x0fff << 4usize)) | (((val as u32) & 0x0fff) << 4usize);
+            }
+        }
+        impl Default for Brr {
+            fn default() -> Brr {
+                Brr(0)
+            }
+        }
+    }
+    pub mod vals {
+        use crate::generic::*;
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct M(pub u8);
+        impl M {
+            #[doc = "8 data bits"]
+            pub const M8: Self = Self(0);
+            #[doc = "9 data bits"]
+            pub const M9: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lbdl(pub u8);
+        impl Lbdl {
+            #[doc = "10-bit break detection"]
+            pub const LBDL10: Self = Self(0);
+            #[doc = "11-bit break detection"]
+            pub const LBDL11: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Irlp(pub u8);
+        impl Irlp {
+            #[doc = "Normal mode"]
+            pub const NORMAL: Self = Self(0);
+            #[doc = "Low-power mode"]
+            pub const LOWPOWER: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Rwu(pub u8);
+        impl Rwu {
+            #[doc = "Receiver in active mode"]
+            pub const ACTIVE: Self = Self(0);
+            #[doc = "Receiver in mute mode"]
+            pub const MUTE: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Hdsel(pub u8);
+        impl Hdsel {
+            #[doc = "Half duplex mode is not selected"]
+            pub const FULLDUPLEX: Self = Self(0);
+            #[doc = "Half duplex mode is selected"]
+            pub const HALFDUPLEX: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Sbk(pub u8);
+        impl Sbk {
+            #[doc = "No break character is transmitted"]
+            pub const NOBREAK: Self = Self(0);
+            #[doc = "Break character transmitted"]
+            pub const BREAK: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Wake(pub u8);
+        impl Wake {
+            #[doc = "USART wakeup on idle line"]
+            pub const IDLELINE: Self = Self(0);
+            #[doc = "USART wakeup on address mark"]
+            pub const ADDRESSMARK: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Stop(pub u8);
+        impl Stop {
+            #[doc = "1 stop bit"]
+            pub const STOP1: Self = Self(0);
+            #[doc = "0.5 stop bits"]
+            pub const STOP0P5: Self = Self(0x01);
+            #[doc = "2 stop bits"]
+            pub const STOP2: Self = Self(0x02);
+            #[doc = "1.5 stop bits"]
+            pub const STOP1P5: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Cpha(pub u8);
+        impl Cpha {
+            #[doc = "The first clock transition is the first data capture edge"]
+            pub const FIRST: Self = Self(0);
+            #[doc = "The second clock transition is the first data capture edge"]
+            pub const SECOND: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Cpol(pub u8);
+        impl Cpol {
+            #[doc = "Steady low value on CK pin outside transmission window"]
+            pub const LOW: Self = Self(0);
+            #[doc = "Steady high value on CK pin outside transmission window"]
+            pub const HIGH: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ps(pub u8);
+        impl Ps {
+            #[doc = "Even parity"]
+            pub const EVEN: Self = Self(0);
+            #[doc = "Odd parity"]
+            pub const ODD: Self = Self(0x01);
+        }
+    }
+}
+pub mod gpio_v2 {
+    use crate::generic::*;
+    #[doc = "General-purpose I/Os"]
+    #[derive(Copy, Clone)]
+    pub struct Gpio(pub *mut u8);
+    unsafe impl Send for Gpio {}
+    unsafe impl Sync for Gpio {}
+    impl Gpio {
+        #[doc = "GPIO port mode register"]
+        pub fn moder(self) -> Reg<regs::Moder, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "GPIO port output type register"]
+        pub fn otyper(self) -> Reg<regs::Otyper, RW> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "GPIO port output speed register"]
+        pub fn ospeedr(self) -> Reg<regs::Ospeedr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        }
+        #[doc = "GPIO port pull-up/pull-down register"]
+        pub fn pupdr(self) -> Reg<regs::Pupdr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(12usize)) }
+        }
+        #[doc = "GPIO port input data register"]
+        pub fn idr(self) -> Reg<regs::Idr, R> {
+            unsafe { Reg::from_ptr(self.0.add(16usize)) }
+        }
+        #[doc = "GPIO port output data register"]
+        pub fn odr(self) -> Reg<regs::Odr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(20usize)) }
+        }
+        #[doc = "GPIO port bit set/reset register"]
+        pub fn bsrr(self) -> Reg<regs::Bsrr, W> {
+            unsafe { Reg::from_ptr(self.0.add(24usize)) }
+        }
+        #[doc = "GPIO port configuration lock register"]
+        pub fn lckr(self) -> Reg<regs::Lckr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(28usize)) }
+        }
+        #[doc = "GPIO alternate function register (low, high)"]
+        pub fn afr(self, n: usize) -> Reg<regs::Afr, RW> {
+            assert!(n < 2usize);
+            unsafe { Reg::from_ptr(self.0.add(32usize + n * 4usize)) }
+        }
+    }
+    pub mod vals {
+        use crate::generic::*;
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Moder(pub u8);
+        impl Moder {
+            #[doc = "Input mode (reset state)"]
+            pub const INPUT: Self = Self(0);
+            #[doc = "General purpose output mode"]
+            pub const OUTPUT: Self = Self(0x01);
+            #[doc = "Alternate function mode"]
+            pub const ALTERNATE: Self = Self(0x02);
+            #[doc = "Analog mode"]
+            pub const ANALOG: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Odr(pub u8);
+        impl Odr {
+            #[doc = "Set output to logic low"]
+            pub const LOW: Self = Self(0);
+            #[doc = "Set output to logic high"]
+            pub const HIGH: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ot(pub u8);
+        impl Ot {
+            #[doc = "Output push-pull (reset state)"]
+            pub const PUSHPULL: Self = Self(0);
+            #[doc = "Output open-drain"]
+            pub const OPENDRAIN: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Brw(pub u8);
+        impl Brw {
+            #[doc = "Resets the corresponding ODRx bit"]
+            pub const RESET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lck(pub u8);
+        impl Lck {
+            #[doc = "Port configuration not locked"]
+            pub const UNLOCKED: Self = Self(0);
+            #[doc = "Port configuration locked"]
+            pub const LOCKED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Idr(pub u8);
+        impl Idr {
+            #[doc = "Input is logic low"]
+            pub const LOW: Self = Self(0);
+            #[doc = "Input is logic high"]
+            pub const HIGH: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ospeedr(pub u8);
+        impl Ospeedr {
+            #[doc = "Low speed"]
+            pub const LOWSPEED: Self = Self(0);
+            #[doc = "Medium speed"]
+            pub const MEDIUMSPEED: Self = Self(0x01);
+            #[doc = "High speed"]
+            pub const HIGHSPEED: Self = Self(0x02);
+            #[doc = "Very high speed"]
+            pub const VERYHIGHSPEED: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Afr(pub u8);
+        impl Afr {
+            #[doc = "AF0"]
+            pub const AF0: Self = Self(0);
+            #[doc = "AF1"]
+            pub const AF1: Self = Self(0x01);
+            #[doc = "AF2"]
+            pub const AF2: Self = Self(0x02);
+            #[doc = "AF3"]
+            pub const AF3: Self = Self(0x03);
+            #[doc = "AF4"]
+            pub const AF4: Self = Self(0x04);
+            #[doc = "AF5"]
+            pub const AF5: Self = Self(0x05);
+            #[doc = "AF6"]
+            pub const AF6: Self = Self(0x06);
+            #[doc = "AF7"]
+            pub const AF7: Self = Self(0x07);
+            #[doc = "AF8"]
+            pub const AF8: Self = Self(0x08);
+            #[doc = "AF9"]
+            pub const AF9: Self = Self(0x09);
+            #[doc = "AF10"]
+            pub const AF10: Self = Self(0x0a);
+            #[doc = "AF11"]
+            pub const AF11: Self = Self(0x0b);
+            #[doc = "AF12"]
+            pub const AF12: Self = Self(0x0c);
+            #[doc = "AF13"]
+            pub const AF13: Self = Self(0x0d);
+            #[doc = "AF14"]
+            pub const AF14: Self = Self(0x0e);
+            #[doc = "AF15"]
+            pub const AF15: Self = Self(0x0f);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lckk(pub u8);
+        impl Lckk {
+            #[doc = "Port configuration lock key not active"]
+            pub const NOTACTIVE: Self = Self(0);
+            #[doc = "Port configuration lock key active"]
+            pub const ACTIVE: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Bsw(pub u8);
+        impl Bsw {
+            #[doc = "Sets the corresponding ODRx bit"]
+            pub const SET: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Pupdr(pub u8);
+        impl Pupdr {
+            #[doc = "No pull-up, pull-down"]
+            pub const FLOATING: Self = Self(0);
+            #[doc = "Pull-up"]
+            pub const PULLUP: Self = Self(0x01);
+            #[doc = "Pull-down"]
+            pub const PULLDOWN: Self = Self(0x02);
+        }
+    }
+    pub mod regs {
+        use crate::generic::*;
+        #[doc = "GPIO port output speed register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ospeedr(pub u32);
+        impl Ospeedr {
+            #[doc = "Port x configuration bits (y = 0..15)"]
+            pub fn ospeedr(&self, n: usize) -> super::vals::Ospeedr {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 2usize;
+                let val = (self.0 >> offs) & 0x03;
+                super::vals::Ospeedr(val as u8)
+            }
+            #[doc = "Port x configuration bits (y = 0..15)"]
+            pub fn set_ospeedr(&mut self, n: usize, val: super::vals::Ospeedr) {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 2usize;
+                self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs);
+            }
+        }
+        impl Default for Ospeedr {
+            fn default() -> Ospeedr {
+                Ospeedr(0)
+            }
+        }
+        #[doc = "GPIO port input data register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Idr(pub u32);
+        impl Idr {
+            #[doc = "Port input data (y = 0..15)"]
+            pub fn idr(&self, n: usize) -> super::vals::Idr {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Idr(val as u8)
+            }
+            #[doc = "Port input data (y = 0..15)"]
+            pub fn set_idr(&mut self, n: usize, val: super::vals::Idr) {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Idr {
+            fn default() -> Idr {
+                Idr(0)
+            }
+        }
+        #[doc = "GPIO port mode register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Moder(pub u32);
+        impl Moder {
+            #[doc = "Port x configuration bits (y = 0..15)"]
+            pub fn moder(&self, n: usize) -> super::vals::Moder {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 2usize;
+                let val = (self.0 >> offs) & 0x03;
+                super::vals::Moder(val as u8)
+            }
+            #[doc = "Port x configuration bits (y = 0..15)"]
+            pub fn set_moder(&mut self, n: usize, val: super::vals::Moder) {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 2usize;
+                self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs);
+            }
+        }
+        impl Default for Moder {
+            fn default() -> Moder {
+                Moder(0)
+            }
+        }
+        #[doc = "GPIO port bit set/reset register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Bsrr(pub u32);
+        impl Bsrr {
+            #[doc = "Port x set bit y (y= 0..15)"]
+            pub fn bs(&self, n: usize) -> bool {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Port x set bit y (y= 0..15)"]
+            pub fn set_bs(&mut self, n: usize, val: bool) {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Port x set bit y (y= 0..15)"]
+            pub fn br(&self, n: usize) -> bool {
+                assert!(n < 16usize);
+                let offs = 16usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Port x set bit y (y= 0..15)"]
+            pub fn set_br(&mut self, n: usize, val: bool) {
+                assert!(n < 16usize);
+                let offs = 16usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Bsrr {
+            fn default() -> Bsrr {
+                Bsrr(0)
+            }
+        }
+        #[doc = "GPIO port output type register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Otyper(pub u32);
+        impl Otyper {
+            #[doc = "Port x configuration bits (y = 0..15)"]
+            pub fn ot(&self, n: usize) -> super::vals::Ot {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Ot(val as u8)
+            }
+            #[doc = "Port x configuration bits (y = 0..15)"]
+            pub fn set_ot(&mut self, n: usize, val: super::vals::Ot) {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Otyper {
+            fn default() -> Otyper {
+                Otyper(0)
+            }
+        }
+        #[doc = "GPIO port pull-up/pull-down register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Pupdr(pub u32);
+        impl Pupdr {
+            #[doc = "Port x configuration bits (y = 0..15)"]
+            pub fn pupdr(&self, n: usize) -> super::vals::Pupdr {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 2usize;
+                let val = (self.0 >> offs) & 0x03;
+                super::vals::Pupdr(val as u8)
+            }
+            #[doc = "Port x configuration bits (y = 0..15)"]
+            pub fn set_pupdr(&mut self, n: usize, val: super::vals::Pupdr) {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 2usize;
+                self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs);
+            }
+        }
+        impl Default for Pupdr {
+            fn default() -> Pupdr {
+                Pupdr(0)
+            }
+        }
+        #[doc = "GPIO alternate function register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Afr(pub u32);
+        impl Afr {
+            #[doc = "Alternate function selection for port x bit y (y = 0..15)"]
+            pub fn afr(&self, n: usize) -> super::vals::Afr {
+                assert!(n < 8usize);
+                let offs = 0usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x0f;
+                super::vals::Afr(val as u8)
+            }
+            #[doc = "Alternate function selection for port x bit y (y = 0..15)"]
+            pub fn set_afr(&mut self, n: usize, val: super::vals::Afr) {
+                assert!(n < 8usize);
+                let offs = 0usize + n * 4usize;
+                self.0 = (self.0 & !(0x0f << offs)) | (((val.0 as u32) & 0x0f) << offs);
+            }
+        }
+        impl Default for Afr {
+            fn default() -> Afr {
+                Afr(0)
+            }
+        }
+        #[doc = "GPIO port configuration lock register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Lckr(pub u32);
+        impl Lckr {
+            #[doc = "Port x lock bit y (y= 0..15)"]
+            pub fn lck(&self, n: usize) -> super::vals::Lck {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Lck(val as u8)
+            }
+            #[doc = "Port x lock bit y (y= 0..15)"]
+            pub fn set_lck(&mut self, n: usize, val: super::vals::Lck) {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+            #[doc = "Port x lock bit y (y= 0..15)"]
+            pub const fn lckk(&self) -> super::vals::Lckk {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Lckk(val as u8)
+            }
+            #[doc = "Port x lock bit y (y= 0..15)"]
+            pub fn set_lckk(&mut self, val: super::vals::Lckk) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+        }
+        impl Default for Lckr {
+            fn default() -> Lckr {
+                Lckr(0)
+            }
+        }
+        #[doc = "GPIO port output data register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Odr(pub u32);
+        impl Odr {
+            #[doc = "Port output data (y = 0..15)"]
+            pub fn odr(&self, n: usize) -> super::vals::Odr {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Odr(val as u8)
+            }
+            #[doc = "Port output data (y = 0..15)"]
+            pub fn set_odr(&mut self, n: usize, val: super::vals::Odr) {
+                assert!(n < 16usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Odr {
+            fn default() -> Odr {
+                Odr(0)
+            }
+        }
+    }
+}
+pub mod spi_v1 {
+    use crate::generic::*;
+    #[doc = "Serial peripheral interface"]
+    #[derive(Copy, Clone)]
+    pub struct Spi(pub *mut u8);
+    unsafe impl Send for Spi {}
+    unsafe impl Sync for Spi {}
+    impl Spi {
+        #[doc = "control register 1"]
+        pub fn cr1(self) -> Reg<regs::Cr1, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "control register 2"]
+        pub fn cr2(self) -> Reg<regs::Cr2, RW> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "status register"]
+        pub fn sr(self) -> Reg<regs::Sr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        }
+        #[doc = "data register"]
+        pub fn dr(self) -> Reg<regs::Dr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(12usize)) }
+        }
+        #[doc = "CRC polynomial register"]
+        pub fn crcpr(self) -> Reg<regs::Crcpr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(16usize)) }
+        }
+        #[doc = "RX CRC register"]
+        pub fn rxcrcr(self) -> Reg<regs::Rxcrcr, R> {
+            unsafe { Reg::from_ptr(self.0.add(20usize)) }
+        }
+        #[doc = "TX CRC register"]
+        pub fn txcrcr(self) -> Reg<regs::Txcrcr, R> {
+            unsafe { Reg::from_ptr(self.0.add(24usize)) }
+        }
+    }
+    pub mod regs {
+        use crate::generic::*;
+        #[doc = "status register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Sr(pub u32);
+        impl Sr {
+            #[doc = "Receive buffer not empty"]
+            pub const fn rxne(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Receive buffer not empty"]
+            pub fn set_rxne(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Transmit buffer empty"]
+            pub const fn txe(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transmit buffer empty"]
+            pub fn set_txe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "CRC error flag"]
+            pub const fn crcerr(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CRC error flag"]
+            pub fn set_crcerr(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Mode fault"]
+            pub const fn modf(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Mode fault"]
+            pub fn set_modf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Overrun flag"]
+            pub const fn ovr(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Overrun flag"]
+            pub fn set_ovr(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Busy flag"]
+            pub const fn bsy(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Busy flag"]
+            pub fn set_bsy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "TI frame format error"]
+            pub const fn fre(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "TI frame format error"]
+            pub fn set_fre(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+        }
+        impl Default for Sr {
+            fn default() -> Sr {
+                Sr(0)
+            }
+        }
+        #[doc = "control register 2"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr2(pub u32);
+        impl Cr2 {
+            #[doc = "Rx buffer DMA enable"]
+            pub const fn rxdmaen(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Rx buffer DMA enable"]
+            pub fn set_rxdmaen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Tx buffer DMA enable"]
+            pub const fn txdmaen(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Tx buffer DMA enable"]
+            pub fn set_txdmaen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "SS output enable"]
+            pub const fn ssoe(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "SS output enable"]
+            pub fn set_ssoe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Frame format"]
+            pub const fn frf(&self) -> super::vals::Frf {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Frf(val as u8)
+            }
+            #[doc = "Frame format"]
+            pub fn set_frf(&mut self, val: super::vals::Frf) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Error interrupt enable"]
+            pub const fn errie(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Error interrupt enable"]
+            pub fn set_errie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "RX buffer not empty interrupt enable"]
+            pub const fn rxneie(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "RX buffer not empty interrupt enable"]
+            pub fn set_rxneie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Tx buffer empty interrupt enable"]
+            pub const fn txeie(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Tx buffer empty interrupt enable"]
+            pub fn set_txeie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+        }
+        impl Default for Cr2 {
+            fn default() -> Cr2 {
+                Cr2(0)
+            }
+        }
+        #[doc = "RX CRC register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Rxcrcr(pub u32);
+        impl Rxcrcr {
+            #[doc = "Rx CRC register"]
+            pub const fn rx_crc(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "Rx CRC register"]
+            pub fn set_rx_crc(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+        }
+        impl Default for Rxcrcr {
+            fn default() -> Rxcrcr {
+                Rxcrcr(0)
+            }
+        }
+        #[doc = "control register 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr1(pub u32);
+        impl Cr1 {
+            #[doc = "Clock phase"]
+            pub const fn cpha(&self) -> super::vals::Cpha {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Cpha(val as u8)
+            }
+            #[doc = "Clock phase"]
+            pub fn set_cpha(&mut self, val: super::vals::Cpha) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Clock polarity"]
+            pub const fn cpol(&self) -> super::vals::Cpol {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Cpol(val as u8)
+            }
+            #[doc = "Clock polarity"]
+            pub fn set_cpol(&mut self, val: super::vals::Cpol) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Master selection"]
+            pub const fn mstr(&self) -> super::vals::Mstr {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Mstr(val as u8)
+            }
+            #[doc = "Master selection"]
+            pub fn set_mstr(&mut self, val: super::vals::Mstr) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Baud rate control"]
+            pub const fn br(&self) -> super::vals::Br {
+                let val = (self.0 >> 3usize) & 0x07;
+                super::vals::Br(val as u8)
+            }
+            #[doc = "Baud rate control"]
+            pub fn set_br(&mut self, val: super::vals::Br) {
+                self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize);
+            }
+            #[doc = "SPI enable"]
+            pub const fn spe(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "SPI enable"]
+            pub fn set_spe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Frame format"]
+            pub const fn lsbfirst(&self) -> super::vals::Lsbfirst {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Lsbfirst(val as u8)
+            }
+            #[doc = "Frame format"]
+            pub fn set_lsbfirst(&mut self, val: super::vals::Lsbfirst) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Internal slave select"]
+            pub const fn ssi(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Internal slave select"]
+            pub fn set_ssi(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Software slave management"]
+            pub const fn ssm(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Software slave management"]
+            pub fn set_ssm(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "Receive only"]
+            pub const fn rxonly(&self) -> super::vals::Rxonly {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::Rxonly(val as u8)
+            }
+            #[doc = "Receive only"]
+            pub fn set_rxonly(&mut self, val: super::vals::Rxonly) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "Data frame format"]
+            pub const fn dff(&self) -> super::vals::Dff {
+                let val = (self.0 >> 11usize) & 0x01;
+                super::vals::Dff(val as u8)
+            }
+            #[doc = "Data frame format"]
+            pub fn set_dff(&mut self, val: super::vals::Dff) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
+            }
+            #[doc = "CRC transfer next"]
+            pub const fn crcnext(&self) -> super::vals::Crcnext {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Crcnext(val as u8)
+            }
+            #[doc = "CRC transfer next"]
+            pub fn set_crcnext(&mut self, val: super::vals::Crcnext) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "Hardware CRC calculation enable"]
+            pub const fn crcen(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Hardware CRC calculation enable"]
+            pub fn set_crcen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+            #[doc = "Output enable in bidirectional mode"]
+            pub const fn bidioe(&self) -> super::vals::Bidioe {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Bidioe(val as u8)
+            }
+            #[doc = "Output enable in bidirectional mode"]
+            pub fn set_bidioe(&mut self, val: super::vals::Bidioe) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "Bidirectional data mode enable"]
+            pub const fn bidimode(&self) -> super::vals::Bidimode {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Bidimode(val as u8)
+            }
+            #[doc = "Bidirectional data mode enable"]
+            pub fn set_bidimode(&mut self, val: super::vals::Bidimode) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+        }
+        impl Default for Cr1 {
+            fn default() -> Cr1 {
+                Cr1(0)
+            }
+        }
+        #[doc = "CRC polynomial register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Crcpr(pub u32);
+        impl Crcpr {
+            #[doc = "CRC polynomial register"]
+            pub const fn crcpoly(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "CRC polynomial register"]
+            pub fn set_crcpoly(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+        }
+        impl Default for Crcpr {
+            fn default() -> Crcpr {
+                Crcpr(0)
+            }
+        }
+        #[doc = "TX CRC register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Txcrcr(pub u32);
+        impl Txcrcr {
+            #[doc = "Tx CRC register"]
+            pub const fn tx_crc(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "Tx CRC register"]
+            pub fn set_tx_crc(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+        }
+        impl Default for Txcrcr {
+            fn default() -> Txcrcr {
+                Txcrcr(0)
+            }
+        }
+        #[doc = "data register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Dr(pub u32);
+        impl Dr {
+            #[doc = "Data register"]
+            pub const fn dr(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "Data register"]
+            pub fn set_dr(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+        }
+        impl Default for Dr {
+            fn default() -> Dr {
+                Dr(0)
+            }
+        }
+    }
+    pub mod vals {
+        use crate::generic::*;
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Cpha(pub u8);
+        impl Cpha {
+            #[doc = "The first clock transition is the first data capture edge"]
+            pub const FIRSTEDGE: Self = Self(0);
+            #[doc = "The second clock transition is the first data capture edge"]
+            pub const SECONDEDGE: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Bidimode(pub u8);
+        impl Bidimode {
+            #[doc = "2-line unidirectional data mode selected"]
+            pub const UNIDIRECTIONAL: Self = Self(0);
+            #[doc = "1-line bidirectional data mode selected"]
+            pub const BIDIRECTIONAL: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Iscfg(pub u8);
+        impl Iscfg {
+            #[doc = "Slave - transmit"]
+            pub const SLAVETX: Self = Self(0);
+            #[doc = "Slave - receive"]
+            pub const SLAVERX: Self = Self(0x01);
+            #[doc = "Master - transmit"]
+            pub const MASTERTX: Self = Self(0x02);
+            #[doc = "Master - receive"]
+            pub const MASTERRX: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Cpol(pub u8);
+        impl Cpol {
+            #[doc = "CK to 0 when idle"]
+            pub const IDLELOW: Self = Self(0);
+            #[doc = "CK to 1 when idle"]
+            pub const IDLEHIGH: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Crcnext(pub u8);
+        impl Crcnext {
+            #[doc = "Next transmit value is from Tx buffer"]
+            pub const TXBUFFER: Self = Self(0);
+            #[doc = "Next transmit value is from Tx CRC register"]
+            pub const CRC: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Br(pub u8);
+        impl Br {
+            #[doc = "f_PCLK / 2"]
+            pub const DIV2: Self = Self(0);
+            #[doc = "f_PCLK / 4"]
+            pub const DIV4: Self = Self(0x01);
+            #[doc = "f_PCLK / 8"]
+            pub const DIV8: Self = Self(0x02);
+            #[doc = "f_PCLK / 16"]
+            pub const DIV16: Self = Self(0x03);
+            #[doc = "f_PCLK / 32"]
+            pub const DIV32: Self = Self(0x04);
+            #[doc = "f_PCLK / 64"]
+            pub const DIV64: Self = Self(0x05);
+            #[doc = "f_PCLK / 128"]
+            pub const DIV128: Self = Self(0x06);
+            #[doc = "f_PCLK / 256"]
+            pub const DIV256: Self = Self(0x07);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Mstr(pub u8);
+        impl Mstr {
+            #[doc = "Slave configuration"]
+            pub const SLAVE: Self = Self(0);
+            #[doc = "Master configuration"]
+            pub const MASTER: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lsbfirst(pub u8);
+        impl Lsbfirst {
+            #[doc = "Data is transmitted/received with the MSB first"]
+            pub const MSBFIRST: Self = Self(0);
+            #[doc = "Data is transmitted/received with the LSB first"]
+            pub const LSBFIRST: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Rxonly(pub u8);
+        impl Rxonly {
+            #[doc = "Full duplex (Transmit and receive)"]
+            pub const FULLDUPLEX: Self = Self(0);
+            #[doc = "Output disabled (Receive-only mode)"]
+            pub const OUTPUTDISABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Frf(pub u8);
+        impl Frf {
+            #[doc = "SPI Motorola mode"]
+            pub const MOTOROLA: Self = Self(0);
+            #[doc = "SPI TI mode"]
+            pub const TI: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Dff(pub u8);
+        impl Dff {
+            #[doc = "8-bit data frame format is selected for transmission/reception"]
+            pub const EIGHTBIT: Self = Self(0);
+            #[doc = "16-bit data frame format is selected for transmission/reception"]
+            pub const SIXTEENBIT: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Frer(pub u8);
+        impl Frer {
+            #[doc = "No frame format error"]
+            pub const NOERROR: Self = Self(0);
+            #[doc = "A frame format error occurred"]
+            pub const ERROR: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Bidioe(pub u8);
+        impl Bidioe {
+            #[doc = "Output disabled (receive-only mode)"]
+            pub const OUTPUTDISABLED: Self = Self(0);
+            #[doc = "Output enabled (transmit-only mode)"]
+            pub const OUTPUTENABLED: Self = Self(0x01);
+        }
+    }
+}
+pub mod generic {
+    use core::marker::PhantomData;
+    #[derive(Copy, Clone)]
+    pub struct RW;
+    #[derive(Copy, Clone)]
+    pub struct R;
+    #[derive(Copy, Clone)]
+    pub struct W;
+    mod sealed {
+        use super::*;
+        pub trait Access {}
+        impl Access for R {}
+        impl Access for W {}
+        impl Access for RW {}
+    }
+    pub trait Access: sealed::Access + Copy {}
+    impl Access for R {}
+    impl Access for W {}
+    impl Access for RW {}
+    pub trait Read: Access {}
+    impl Read for RW {}
+    impl Read for R {}
+    pub trait Write: Access {}
+    impl Write for RW {}
+    impl Write for W {}
+    #[derive(Copy, Clone)]
+    pub struct Reg<T: Copy, A: Access> {
+        ptr: *mut u8,
+        phantom: PhantomData<*mut (T, A)>,
+    }
+    unsafe impl<T: Copy, A: Access> Send for Reg<T, A> {}
+    unsafe impl<T: Copy, A: Access> Sync for Reg<T, A> {}
+    impl<T: Copy, A: Access> Reg<T, A> {
+        pub fn from_ptr(ptr: *mut u8) -> Self {
+            Self {
+                ptr,
+                phantom: PhantomData,
+            }
+        }
+        pub fn ptr(&self) -> *mut T {
+            self.ptr as _
+        }
+    }
+    impl<T: Copy, A: Read> Reg<T, A> {
+        pub unsafe fn read(&self) -> T {
+            (self.ptr as *mut T).read_volatile()
+        }
+    }
+    impl<T: Copy, A: Write> Reg<T, A> {
+        pub unsafe fn write_value(&self, val: T) {
+            (self.ptr as *mut T).write_volatile(val)
+        }
+    }
+    impl<T: Default + Copy, A: Write> Reg<T, A> {
+        pub unsafe fn write<R>(&self, f: impl FnOnce(&mut T) -> R) -> R {
+            let mut val = Default::default();
+            let res = f(&mut val);
+            self.write_value(val);
+            res
+        }
+    }
+    impl<T: Copy, A: Read + Write> Reg<T, A> {
+        pub unsafe fn modify<R>(&self, f: impl FnOnce(&mut T) -> R) -> R {
+            let mut val = self.read();
+            let res = f(&mut val);
+            self.write_value(val);
+            res
+        }
+    }
+}
+pub mod dma_v2 {
+    use crate::generic::*;
+    #[doc = "DMA controller"]
+    #[derive(Copy, Clone)]
+    pub struct Dma(pub *mut u8);
+    unsafe impl Send for Dma {}
+    unsafe impl Sync for Dma {}
+    impl Dma {
+        #[doc = "low interrupt status register"]
+        pub fn isr(self, n: usize) -> Reg<regs::Ixr, R> {
+            assert!(n < 2usize);
+            unsafe { Reg::from_ptr(self.0.add(0usize + n * 4usize)) }
+        }
+        #[doc = "low interrupt flag clear register"]
+        pub fn ifcr(self, n: usize) -> Reg<regs::Ixr, W> {
+            assert!(n < 2usize);
+            unsafe { Reg::from_ptr(self.0.add(8usize + n * 4usize)) }
+        }
+        #[doc = "Stream cluster: S?CR, S?NDTR, S?M0AR, S?M1AR and S?FCR registers"]
+        pub fn st(self, n: usize) -> St {
+            assert!(n < 8usize);
+            unsafe { St(self.0.add(16usize + n * 24usize)) }
+        }
+    }
+    #[doc = "Stream cluster: S?CR, S?NDTR, S?M0AR, S?M1AR and S?FCR registers"]
+    #[derive(Copy, Clone)]
+    pub struct St(pub *mut u8);
+    unsafe impl Send for St {}
+    unsafe impl Sync for St {}
+    impl St {
+        #[doc = "stream x configuration register"]
+        pub fn cr(self) -> Reg<regs::Cr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "stream x number of data register"]
+        pub fn ndtr(self) -> Reg<regs::Ndtr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "stream x peripheral address register"]
+        pub fn par(self) -> Reg<u32, RW> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        }
+        #[doc = "stream x memory 0 address register"]
+        pub fn m0ar(self) -> Reg<u32, RW> {
+            unsafe { Reg::from_ptr(self.0.add(12usize)) }
+        }
+        #[doc = "stream x memory 1 address register"]
+        pub fn m1ar(self) -> Reg<u32, RW> {
+            unsafe { Reg::from_ptr(self.0.add(16usize)) }
+        }
+        #[doc = "stream x FIFO control register"]
+        pub fn fcr(self) -> Reg<regs::Fcr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(20usize)) }
+        }
+    }
+    pub mod regs {
+        use crate::generic::*;
+        #[doc = "interrupt register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ixr(pub u32);
+        impl Ixr {
+            #[doc = "Stream x FIFO error interrupt flag (x=3..0)"]
+            pub fn feif(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 0usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Stream x FIFO error interrupt flag (x=3..0)"]
+            pub fn set_feif(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 0usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Stream x direct mode error interrupt flag (x=3..0)"]
+            pub fn dmeif(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 2usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Stream x direct mode error interrupt flag (x=3..0)"]
+            pub fn set_dmeif(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 2usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Stream x transfer error interrupt flag (x=3..0)"]
+            pub fn teif(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 3usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Stream x transfer error interrupt flag (x=3..0)"]
+            pub fn set_teif(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 3usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Stream x half transfer interrupt flag (x=3..0)"]
+            pub fn htif(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 4usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Stream x half transfer interrupt flag (x=3..0)"]
+            pub fn set_htif(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 4usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Stream x transfer complete interrupt flag (x = 3..0)"]
+            pub fn tcif(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 5usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Stream x transfer complete interrupt flag (x = 3..0)"]
+            pub fn set_tcif(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 5usize + ([0usize, 6usize, 16usize, 22usize][n] as usize);
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Ixr {
+            fn default() -> Ixr {
+                Ixr(0)
+            }
+        }
+        #[doc = "stream x number of data register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ndtr(pub u32);
+        impl Ndtr {
+            #[doc = "Number of data items to transfer"]
+            pub const fn ndt(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "Number of data items to transfer"]
+            pub fn set_ndt(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+        }
+        impl Default for Ndtr {
+            fn default() -> Ndtr {
+                Ndtr(0)
+            }
+        }
+        #[doc = "stream x FIFO control register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Fcr(pub u32);
+        impl Fcr {
+            #[doc = "FIFO threshold selection"]
+            pub const fn fth(&self) -> super::vals::Fth {
+                let val = (self.0 >> 0usize) & 0x03;
+                super::vals::Fth(val as u8)
+            }
+            #[doc = "FIFO threshold selection"]
+            pub fn set_fth(&mut self, val: super::vals::Fth) {
+                self.0 = (self.0 & !(0x03 << 0usize)) | (((val.0 as u32) & 0x03) << 0usize);
+            }
+            #[doc = "Direct mode disable"]
+            pub const fn dmdis(&self) -> super::vals::Dmdis {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Dmdis(val as u8)
+            }
+            #[doc = "Direct mode disable"]
+            pub fn set_dmdis(&mut self, val: super::vals::Dmdis) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "FIFO status"]
+            pub const fn fs(&self) -> super::vals::Fs {
+                let val = (self.0 >> 3usize) & 0x07;
+                super::vals::Fs(val as u8)
+            }
+            #[doc = "FIFO status"]
+            pub fn set_fs(&mut self, val: super::vals::Fs) {
+                self.0 = (self.0 & !(0x07 << 3usize)) | (((val.0 as u32) & 0x07) << 3usize);
+            }
+            #[doc = "FIFO error interrupt enable"]
+            pub const fn feie(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "FIFO error interrupt enable"]
+            pub fn set_feie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+        }
+        impl Default for Fcr {
+            fn default() -> Fcr {
+                Fcr(0)
+            }
+        }
+        #[doc = "stream x configuration register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr(pub u32);
+        impl Cr {
+            #[doc = "Stream enable / flag stream ready when read low"]
+            pub const fn en(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Stream enable / flag stream ready when read low"]
+            pub fn set_en(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Direct mode error interrupt enable"]
+            pub const fn dmeie(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Direct mode error interrupt enable"]
+            pub fn set_dmeie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Transfer error interrupt enable"]
+            pub const fn teie(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transfer error interrupt enable"]
+            pub fn set_teie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Half transfer interrupt enable"]
+            pub const fn htie(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Half transfer interrupt enable"]
+            pub fn set_htie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Transfer complete interrupt enable"]
+            pub const fn tcie(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transfer complete interrupt enable"]
+            pub fn set_tcie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Peripheral flow controller"]
+            pub const fn pfctrl(&self) -> super::vals::Pfctrl {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Pfctrl(val as u8)
+            }
+            #[doc = "Peripheral flow controller"]
+            pub fn set_pfctrl(&mut self, val: super::vals::Pfctrl) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Data transfer direction"]
+            pub const fn dir(&self) -> super::vals::Dir {
+                let val = (self.0 >> 6usize) & 0x03;
+                super::vals::Dir(val as u8)
+            }
+            #[doc = "Data transfer direction"]
+            pub fn set_dir(&mut self, val: super::vals::Dir) {
+                self.0 = (self.0 & !(0x03 << 6usize)) | (((val.0 as u32) & 0x03) << 6usize);
+            }
+            #[doc = "Circular mode"]
+            pub const fn circ(&self) -> super::vals::Circ {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::Circ(val as u8)
+            }
+            #[doc = "Circular mode"]
+            pub fn set_circ(&mut self, val: super::vals::Circ) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Peripheral increment mode"]
+            pub const fn pinc(&self) -> super::vals::Inc {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Inc(val as u8)
+            }
+            #[doc = "Peripheral increment mode"]
+            pub fn set_pinc(&mut self, val: super::vals::Inc) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "Memory increment mode"]
+            pub const fn minc(&self) -> super::vals::Inc {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::Inc(val as u8)
+            }
+            #[doc = "Memory increment mode"]
+            pub fn set_minc(&mut self, val: super::vals::Inc) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "Peripheral data size"]
+            pub const fn psize(&self) -> super::vals::Size {
+                let val = (self.0 >> 11usize) & 0x03;
+                super::vals::Size(val as u8)
+            }
+            #[doc = "Peripheral data size"]
+            pub fn set_psize(&mut self, val: super::vals::Size) {
+                self.0 = (self.0 & !(0x03 << 11usize)) | (((val.0 as u32) & 0x03) << 11usize);
+            }
+            #[doc = "Memory data size"]
+            pub const fn msize(&self) -> super::vals::Size {
+                let val = (self.0 >> 13usize) & 0x03;
+                super::vals::Size(val as u8)
+            }
+            #[doc = "Memory data size"]
+            pub fn set_msize(&mut self, val: super::vals::Size) {
+                self.0 = (self.0 & !(0x03 << 13usize)) | (((val.0 as u32) & 0x03) << 13usize);
+            }
+            #[doc = "Peripheral increment offset size"]
+            pub const fn pincos(&self) -> super::vals::Pincos {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Pincos(val as u8)
+            }
+            #[doc = "Peripheral increment offset size"]
+            pub fn set_pincos(&mut self, val: super::vals::Pincos) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "Priority level"]
+            pub const fn pl(&self) -> super::vals::Pl {
+                let val = (self.0 >> 16usize) & 0x03;
+                super::vals::Pl(val as u8)
+            }
+            #[doc = "Priority level"]
+            pub fn set_pl(&mut self, val: super::vals::Pl) {
+                self.0 = (self.0 & !(0x03 << 16usize)) | (((val.0 as u32) & 0x03) << 16usize);
+            }
+            #[doc = "Double buffer mode"]
+            pub const fn dbm(&self) -> super::vals::Dbm {
+                let val = (self.0 >> 18usize) & 0x01;
+                super::vals::Dbm(val as u8)
+            }
+            #[doc = "Double buffer mode"]
+            pub fn set_dbm(&mut self, val: super::vals::Dbm) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
+            }
+            #[doc = "Current target (only in double buffer mode)"]
+            pub const fn ct(&self) -> super::vals::Ct {
+                let val = (self.0 >> 19usize) & 0x01;
+                super::vals::Ct(val as u8)
+            }
+            #[doc = "Current target (only in double buffer mode)"]
+            pub fn set_ct(&mut self, val: super::vals::Ct) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
+            }
+            #[doc = "Peripheral burst transfer configuration"]
+            pub const fn pburst(&self) -> super::vals::Burst {
+                let val = (self.0 >> 21usize) & 0x03;
+                super::vals::Burst(val as u8)
+            }
+            #[doc = "Peripheral burst transfer configuration"]
+            pub fn set_pburst(&mut self, val: super::vals::Burst) {
+                self.0 = (self.0 & !(0x03 << 21usize)) | (((val.0 as u32) & 0x03) << 21usize);
+            }
+            #[doc = "Memory burst transfer configuration"]
+            pub const fn mburst(&self) -> super::vals::Burst {
+                let val = (self.0 >> 23usize) & 0x03;
+                super::vals::Burst(val as u8)
+            }
+            #[doc = "Memory burst transfer configuration"]
+            pub fn set_mburst(&mut self, val: super::vals::Burst) {
+                self.0 = (self.0 & !(0x03 << 23usize)) | (((val.0 as u32) & 0x03) << 23usize);
+            }
+            #[doc = "Channel selection"]
+            pub const fn chsel(&self) -> u8 {
+                let val = (self.0 >> 25usize) & 0x0f;
+                val as u8
+            }
+            #[doc = "Channel selection"]
+            pub fn set_chsel(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x0f << 25usize)) | (((val as u32) & 0x0f) << 25usize);
+            }
+        }
+        impl Default for Cr {
+            fn default() -> Cr {
+                Cr(0)
+            }
+        }
+    }
+    pub mod vals {
+        use crate::generic::*;
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Dbm(pub u8);
+        impl Dbm {
+            #[doc = "No buffer switching at the end of transfer"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Memory target switched at the end of the DMA transfer"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Fth(pub u8);
+        impl Fth {
+            #[doc = "1/4 full FIFO"]
+            pub const QUARTER: Self = Self(0);
+            #[doc = "1/2 full FIFO"]
+            pub const HALF: Self = Self(0x01);
+            #[doc = "3/4 full FIFO"]
+            pub const THREEQUARTERS: Self = Self(0x02);
+            #[doc = "Full FIFO"]
+            pub const FULL: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Inc(pub u8);
+        impl Inc {
+            #[doc = "Address pointer is fixed"]
+            pub const FIXED: Self = Self(0);
+            #[doc = "Address pointer is incremented after each data transfer"]
+            pub const INCREMENTED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Circ(pub u8);
+        impl Circ {
+            #[doc = "Circular mode disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Circular mode enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Pfctrl(pub u8);
+        impl Pfctrl {
+            #[doc = "The DMA is the flow controller"]
+            pub const DMA: Self = Self(0);
+            #[doc = "The peripheral is the flow controller"]
+            pub const PERIPHERAL: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Pincos(pub u8);
+        impl Pincos {
+            #[doc = "The offset size for the peripheral address calculation is linked to the PSIZE"]
+            pub const PSIZE: Self = Self(0);
+            #[doc = "The offset size for the peripheral address calculation is fixed to 4 (32-bit alignment)"]
+            pub const FIXED4: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Dir(pub u8);
+        impl Dir {
+            #[doc = "Peripheral-to-memory"]
+            pub const PERIPHERALTOMEMORY: Self = Self(0);
+            #[doc = "Memory-to-peripheral"]
+            pub const MEMORYTOPERIPHERAL: Self = Self(0x01);
+            #[doc = "Memory-to-memory"]
+            pub const MEMORYTOMEMORY: Self = Self(0x02);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Size(pub u8);
+        impl Size {
+            #[doc = "Byte (8-bit)"]
+            pub const BITS8: Self = Self(0);
+            #[doc = "Half-word (16-bit)"]
+            pub const BITS16: Self = Self(0x01);
+            #[doc = "Word (32-bit)"]
+            pub const BITS32: Self = Self(0x02);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ct(pub u8);
+        impl Ct {
+            #[doc = "The current target memory is Memory 0"]
+            pub const MEMORY0: Self = Self(0);
+            #[doc = "The current target memory is Memory 1"]
+            pub const MEMORY1: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Burst(pub u8);
+        impl Burst {
+            #[doc = "Single transfer"]
+            pub const SINGLE: Self = Self(0);
+            #[doc = "Incremental burst of 4 beats"]
+            pub const INCR4: Self = Self(0x01);
+            #[doc = "Incremental burst of 8 beats"]
+            pub const INCR8: Self = Self(0x02);
+            #[doc = "Incremental burst of 16 beats"]
+            pub const INCR16: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Fs(pub u8);
+        impl Fs {
+            #[doc = "0 < fifo_level < 1/4"]
+            pub const QUARTER1: Self = Self(0);
+            #[doc = "1/4 <= fifo_level < 1/2"]
+            pub const QUARTER2: Self = Self(0x01);
+            #[doc = "1/2 <= fifo_level < 3/4"]
+            pub const QUARTER3: Self = Self(0x02);
+            #[doc = "3/4 <= fifo_level < full"]
+            pub const QUARTER4: Self = Self(0x03);
+            #[doc = "FIFO is empty"]
+            pub const EMPTY: Self = Self(0x04);
+            #[doc = "FIFO is full"]
+            pub const FULL: Self = Self(0x05);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Dmdis(pub u8);
+        impl Dmdis {
+            #[doc = "Direct mode is enabled"]
+            pub const ENABLED: Self = Self(0);
+            #[doc = "Direct mode is disabled"]
+            pub const DISABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Pl(pub u8);
+        impl Pl {
+            #[doc = "Low"]
+            pub const LOW: Self = Self(0);
+            #[doc = "Medium"]
+            pub const MEDIUM: Self = Self(0x01);
+            #[doc = "High"]
+            pub const HIGH: Self = Self(0x02);
+            #[doc = "Very high"]
+            pub const VERYHIGH: Self = Self(0x03);
+        }
+    }
+}
+pub mod dma_v1 {
+    use crate::generic::*;
+    #[doc = "DMA controller"]
+    #[derive(Copy, Clone)]
+    pub struct Dma(pub *mut u8);
+    unsafe impl Send for Dma {}
+    unsafe impl Sync for Dma {}
+    impl Dma {
+        #[doc = "DMA interrupt status register (DMA_ISR)"]
+        pub fn isr(self) -> Reg<regs::Isr, R> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "DMA interrupt flag clear register (DMA_IFCR)"]
+        pub fn ifcr(self) -> Reg<regs::Ifcr, W> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "Channel cluster: CCR?, CNDTR?, CPAR?, and CMAR? registers"]
+        pub fn ch(self, n: usize) -> Ch {
+            assert!(n < 7usize);
+            unsafe { Ch(self.0.add(8usize + n * 20usize)) }
+        }
+    }
+    #[doc = "Channel cluster: CCR?, CNDTR?, CPAR?, and CMAR? registers"]
+    #[derive(Copy, Clone)]
+    pub struct Ch(pub *mut u8);
+    unsafe impl Send for Ch {}
+    unsafe impl Sync for Ch {}
+    impl Ch {
+        #[doc = "DMA channel configuration register (DMA_CCR)"]
+        pub fn cr(self) -> Reg<regs::Cr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "DMA channel 1 number of data register"]
+        pub fn ndtr(self) -> Reg<regs::Ndtr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "DMA channel 1 peripheral address register"]
+        pub fn par(self) -> Reg<u32, RW> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        }
+        #[doc = "DMA channel 1 memory address register"]
+        pub fn mar(self) -> Reg<u32, RW> {
+            unsafe { Reg::from_ptr(self.0.add(12usize)) }
+        }
+    }
+    pub mod regs {
+        use crate::generic::*;
+        #[doc = "DMA channel 1 number of data register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ndtr(pub u32);
+        impl Ndtr {
+            #[doc = "Number of data to transfer"]
+            pub const fn ndt(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "Number of data to transfer"]
+            pub fn set_ndt(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+        }
+        impl Default for Ndtr {
+            fn default() -> Ndtr {
+                Ndtr(0)
+            }
+        }
+        #[doc = "DMA channel configuration register (DMA_CCR)"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr(pub u32);
+        impl Cr {
+            #[doc = "Channel enable"]
+            pub const fn en(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Channel enable"]
+            pub fn set_en(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Transfer complete interrupt enable"]
+            pub const fn tcie(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transfer complete interrupt enable"]
+            pub fn set_tcie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Half Transfer interrupt enable"]
+            pub const fn htie(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Half Transfer interrupt enable"]
+            pub fn set_htie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Transfer error interrupt enable"]
+            pub const fn teie(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transfer error interrupt enable"]
+            pub fn set_teie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Data transfer direction"]
+            pub const fn dir(&self) -> super::vals::Dir {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Dir(val as u8)
+            }
+            #[doc = "Data transfer direction"]
+            pub fn set_dir(&mut self, val: super::vals::Dir) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Circular mode"]
+            pub const fn circ(&self) -> super::vals::Circ {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Circ(val as u8)
+            }
+            #[doc = "Circular mode"]
+            pub fn set_circ(&mut self, val: super::vals::Circ) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Peripheral increment mode"]
+            pub const fn pinc(&self) -> super::vals::Inc {
+                let val = (self.0 >> 6usize) & 0x01;
+                super::vals::Inc(val as u8)
+            }
+            #[doc = "Peripheral increment mode"]
+            pub fn set_pinc(&mut self, val: super::vals::Inc) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val.0 as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Memory increment mode"]
+            pub const fn minc(&self) -> super::vals::Inc {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Inc(val as u8)
+            }
+            #[doc = "Memory increment mode"]
+            pub fn set_minc(&mut self, val: super::vals::Inc) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Peripheral size"]
+            pub const fn psize(&self) -> super::vals::Size {
+                let val = (self.0 >> 8usize) & 0x03;
+                super::vals::Size(val as u8)
+            }
+            #[doc = "Peripheral size"]
+            pub fn set_psize(&mut self, val: super::vals::Size) {
+                self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize);
+            }
+            #[doc = "Memory size"]
+            pub const fn msize(&self) -> super::vals::Size {
+                let val = (self.0 >> 10usize) & 0x03;
+                super::vals::Size(val as u8)
+            }
+            #[doc = "Memory size"]
+            pub fn set_msize(&mut self, val: super::vals::Size) {
+                self.0 = (self.0 & !(0x03 << 10usize)) | (((val.0 as u32) & 0x03) << 10usize);
+            }
+            #[doc = "Channel Priority level"]
+            pub const fn pl(&self) -> super::vals::Pl {
+                let val = (self.0 >> 12usize) & 0x03;
+                super::vals::Pl(val as u8)
+            }
+            #[doc = "Channel Priority level"]
+            pub fn set_pl(&mut self, val: super::vals::Pl) {
+                self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize);
+            }
+            #[doc = "Memory to memory mode"]
+            pub const fn mem2mem(&self) -> super::vals::Memmem {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Memmem(val as u8)
+            }
+            #[doc = "Memory to memory mode"]
+            pub fn set_mem2mem(&mut self, val: super::vals::Memmem) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+        }
+        impl Default for Cr {
+            fn default() -> Cr {
+                Cr(0)
+            }
+        }
+        #[doc = "DMA interrupt flag clear register (DMA_IFCR)"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ifcr(pub u32);
+        impl Ifcr {
+            #[doc = "Channel 1 Global interrupt clear"]
+            pub fn cgif(&self, n: usize) -> bool {
+                assert!(n < 7usize);
+                let offs = 0usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Channel 1 Global interrupt clear"]
+            pub fn set_cgif(&mut self, n: usize, val: bool) {
+                assert!(n < 7usize);
+                let offs = 0usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Channel 1 Transfer Complete clear"]
+            pub fn ctcif(&self, n: usize) -> bool {
+                assert!(n < 7usize);
+                let offs = 1usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Channel 1 Transfer Complete clear"]
+            pub fn set_ctcif(&mut self, n: usize, val: bool) {
+                assert!(n < 7usize);
+                let offs = 1usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Channel 1 Half Transfer clear"]
+            pub fn chtif(&self, n: usize) -> bool {
+                assert!(n < 7usize);
+                let offs = 2usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Channel 1 Half Transfer clear"]
+            pub fn set_chtif(&mut self, n: usize, val: bool) {
+                assert!(n < 7usize);
+                let offs = 2usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Channel 1 Transfer Error clear"]
+            pub fn cteif(&self, n: usize) -> bool {
+                assert!(n < 7usize);
+                let offs = 3usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Channel 1 Transfer Error clear"]
+            pub fn set_cteif(&mut self, n: usize, val: bool) {
+                assert!(n < 7usize);
+                let offs = 3usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Ifcr {
+            fn default() -> Ifcr {
+                Ifcr(0)
+            }
+        }
+        #[doc = "DMA interrupt status register (DMA_ISR)"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Isr(pub u32);
+        impl Isr {
+            #[doc = "Channel 1 Global interrupt flag"]
+            pub fn gif(&self, n: usize) -> bool {
+                assert!(n < 7usize);
+                let offs = 0usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Channel 1 Global interrupt flag"]
+            pub fn set_gif(&mut self, n: usize, val: bool) {
+                assert!(n < 7usize);
+                let offs = 0usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Channel 1 Transfer Complete flag"]
+            pub fn tcif(&self, n: usize) -> bool {
+                assert!(n < 7usize);
+                let offs = 1usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Channel 1 Transfer Complete flag"]
+            pub fn set_tcif(&mut self, n: usize, val: bool) {
+                assert!(n < 7usize);
+                let offs = 1usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Channel 1 Half Transfer Complete flag"]
+            pub fn htif(&self, n: usize) -> bool {
+                assert!(n < 7usize);
+                let offs = 2usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Channel 1 Half Transfer Complete flag"]
+            pub fn set_htif(&mut self, n: usize, val: bool) {
+                assert!(n < 7usize);
+                let offs = 2usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Channel 1 Transfer Error flag"]
+            pub fn teif(&self, n: usize) -> bool {
+                assert!(n < 7usize);
+                let offs = 3usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Channel 1 Transfer Error flag"]
+            pub fn set_teif(&mut self, n: usize, val: bool) {
+                assert!(n < 7usize);
+                let offs = 3usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Isr {
+            fn default() -> Isr {
+                Isr(0)
+            }
+        }
+    }
+    pub mod vals {
+        use crate::generic::*;
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Pl(pub u8);
+        impl Pl {
+            #[doc = "Low priority"]
+            pub const LOW: Self = Self(0);
+            #[doc = "Medium priority"]
+            pub const MEDIUM: Self = Self(0x01);
+            #[doc = "High priority"]
+            pub const HIGH: Self = Self(0x02);
+            #[doc = "Very high priority"]
+            pub const VERYHIGH: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Inc(pub u8);
+        impl Inc {
+            #[doc = "Increment mode disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Increment mode enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Size(pub u8);
+        impl Size {
+            #[doc = "8-bit size"]
+            pub const BITS8: Self = Self(0);
+            #[doc = "16-bit size"]
+            pub const BITS16: Self = Self(0x01);
+            #[doc = "32-bit size"]
+            pub const BITS32: Self = Self(0x02);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Memmem(pub u8);
+        impl Memmem {
+            #[doc = "Memory to memory mode disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Memory to memory mode enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Dir(pub u8);
+        impl Dir {
+            #[doc = "Read from peripheral"]
+            pub const FROMPERIPHERAL: Self = Self(0);
+            #[doc = "Read from memory"]
+            pub const FROMMEMORY: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Circ(pub u8);
+        impl Circ {
+            #[doc = "Circular buffer disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Circular buffer enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+    }
+}
+pub mod timer_v1 {
+    use crate::generic::*;
+    #[doc = "General purpose 32-bit timer"]
+    #[derive(Copy, Clone)]
+    pub struct TimGp32(pub *mut u8);
+    unsafe impl Send for TimGp32 {}
+    unsafe impl Sync for TimGp32 {}
+    impl TimGp32 {
+        #[doc = "control register 1"]
+        pub fn cr1(self) -> Reg<regs::Cr1Gp, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "control register 2"]
+        pub fn cr2(self) -> Reg<regs::Cr2Gp, RW> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "slave mode control register"]
+        pub fn smcr(self) -> Reg<regs::Smcr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        }
+        #[doc = "DMA/Interrupt enable register"]
+        pub fn dier(self) -> Reg<regs::DierGp, RW> {
+            unsafe { Reg::from_ptr(self.0.add(12usize)) }
+        }
+        #[doc = "status register"]
+        pub fn sr(self) -> Reg<regs::SrGp, RW> {
+            unsafe { Reg::from_ptr(self.0.add(16usize)) }
+        }
+        #[doc = "event generation register"]
+        pub fn egr(self) -> Reg<regs::EgrGp, W> {
+            unsafe { Reg::from_ptr(self.0.add(20usize)) }
+        }
+        #[doc = "capture/compare mode register 1 (input mode)"]
+        pub fn ccmr_input(self, n: usize) -> Reg<regs::CcmrInput, RW> {
+            assert!(n < 2usize);
+            unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) }
+        }
+        #[doc = "capture/compare mode register 1 (output mode)"]
+        pub fn ccmr_output(self, n: usize) -> Reg<regs::CcmrOutput, RW> {
+            assert!(n < 2usize);
+            unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) }
+        }
+        #[doc = "capture/compare enable register"]
+        pub fn ccer(self) -> Reg<regs::CcerGp, RW> {
+            unsafe { Reg::from_ptr(self.0.add(32usize)) }
+        }
+        #[doc = "counter"]
+        pub fn cnt(self) -> Reg<regs::Cnt32, RW> {
+            unsafe { Reg::from_ptr(self.0.add(36usize)) }
+        }
+        #[doc = "prescaler"]
+        pub fn psc(self) -> Reg<regs::Psc, RW> {
+            unsafe { Reg::from_ptr(self.0.add(40usize)) }
+        }
+        #[doc = "auto-reload register"]
+        pub fn arr(self) -> Reg<regs::Arr32, RW> {
+            unsafe { Reg::from_ptr(self.0.add(44usize)) }
+        }
+        #[doc = "capture/compare register"]
+        pub fn ccr(self, n: usize) -> Reg<regs::Ccr32, RW> {
+            assert!(n < 4usize);
+            unsafe { Reg::from_ptr(self.0.add(52usize + n * 4usize)) }
+        }
+        #[doc = "DMA control register"]
+        pub fn dcr(self) -> Reg<regs::Dcr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(72usize)) }
+        }
+        #[doc = "DMA address for full transfer"]
+        pub fn dmar(self) -> Reg<regs::Dmar, RW> {
+            unsafe { Reg::from_ptr(self.0.add(76usize)) }
+        }
+    }
+    #[doc = "Advanced-timers"]
+    #[derive(Copy, Clone)]
+    pub struct TimAdv(pub *mut u8);
+    unsafe impl Send for TimAdv {}
+    unsafe impl Sync for TimAdv {}
+    impl TimAdv {
+        #[doc = "control register 1"]
+        pub fn cr1(self) -> Reg<regs::Cr1Gp, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "control register 2"]
+        pub fn cr2(self) -> Reg<regs::Cr2Adv, RW> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "slave mode control register"]
+        pub fn smcr(self) -> Reg<regs::Smcr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        }
+        #[doc = "DMA/Interrupt enable register"]
+        pub fn dier(self) -> Reg<regs::DierAdv, RW> {
+            unsafe { Reg::from_ptr(self.0.add(12usize)) }
+        }
+        #[doc = "status register"]
+        pub fn sr(self) -> Reg<regs::SrAdv, RW> {
+            unsafe { Reg::from_ptr(self.0.add(16usize)) }
+        }
+        #[doc = "event generation register"]
+        pub fn egr(self) -> Reg<regs::EgrAdv, W> {
+            unsafe { Reg::from_ptr(self.0.add(20usize)) }
+        }
+        #[doc = "capture/compare mode register 1 (input mode)"]
+        pub fn ccmr_input(self, n: usize) -> Reg<regs::CcmrInput, RW> {
+            assert!(n < 2usize);
+            unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) }
+        }
+        #[doc = "capture/compare mode register 1 (output mode)"]
+        pub fn ccmr_output(self, n: usize) -> Reg<regs::CcmrOutput, RW> {
+            assert!(n < 2usize);
+            unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) }
+        }
+        #[doc = "capture/compare enable register"]
+        pub fn ccer(self) -> Reg<regs::CcerAdv, RW> {
+            unsafe { Reg::from_ptr(self.0.add(32usize)) }
+        }
+        #[doc = "counter"]
+        pub fn cnt(self) -> Reg<regs::Cnt16, RW> {
+            unsafe { Reg::from_ptr(self.0.add(36usize)) }
+        }
+        #[doc = "prescaler"]
+        pub fn psc(self) -> Reg<regs::Psc, RW> {
+            unsafe { Reg::from_ptr(self.0.add(40usize)) }
+        }
+        #[doc = "auto-reload register"]
+        pub fn arr(self) -> Reg<regs::Arr16, RW> {
+            unsafe { Reg::from_ptr(self.0.add(44usize)) }
+        }
+        #[doc = "repetition counter register"]
+        pub fn rcr(self) -> Reg<regs::Rcr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(48usize)) }
+        }
+        #[doc = "capture/compare register"]
+        pub fn ccr(self, n: usize) -> Reg<regs::Ccr16, RW> {
+            assert!(n < 4usize);
+            unsafe { Reg::from_ptr(self.0.add(52usize + n * 4usize)) }
+        }
+        #[doc = "break and dead-time register"]
+        pub fn bdtr(self) -> Reg<regs::Bdtr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(68usize)) }
+        }
+        #[doc = "DMA control register"]
+        pub fn dcr(self) -> Reg<regs::Dcr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(72usize)) }
+        }
+        #[doc = "DMA address for full transfer"]
+        pub fn dmar(self) -> Reg<regs::Dmar, RW> {
+            unsafe { Reg::from_ptr(self.0.add(76usize)) }
+        }
+    }
+    #[doc = "Basic timer"]
+    #[derive(Copy, Clone)]
+    pub struct TimBasic(pub *mut u8);
+    unsafe impl Send for TimBasic {}
+    unsafe impl Sync for TimBasic {}
+    impl TimBasic {
+        #[doc = "control register 1"]
+        pub fn cr1(self) -> Reg<regs::Cr1Basic, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "control register 2"]
+        pub fn cr2(self) -> Reg<regs::Cr2Basic, RW> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "DMA/Interrupt enable register"]
+        pub fn dier(self) -> Reg<regs::DierBasic, RW> {
+            unsafe { Reg::from_ptr(self.0.add(12usize)) }
+        }
+        #[doc = "status register"]
+        pub fn sr(self) -> Reg<regs::SrBasic, RW> {
+            unsafe { Reg::from_ptr(self.0.add(16usize)) }
+        }
+        #[doc = "event generation register"]
+        pub fn egr(self) -> Reg<regs::EgrBasic, W> {
+            unsafe { Reg::from_ptr(self.0.add(20usize)) }
+        }
+        #[doc = "counter"]
+        pub fn cnt(self) -> Reg<regs::Cnt16, RW> {
+            unsafe { Reg::from_ptr(self.0.add(36usize)) }
+        }
+        #[doc = "prescaler"]
+        pub fn psc(self) -> Reg<regs::Psc, RW> {
+            unsafe { Reg::from_ptr(self.0.add(40usize)) }
+        }
+        #[doc = "auto-reload register"]
+        pub fn arr(self) -> Reg<regs::Arr16, RW> {
+            unsafe { Reg::from_ptr(self.0.add(44usize)) }
+        }
+    }
+    #[doc = "General purpose 16-bit timer"]
+    #[derive(Copy, Clone)]
+    pub struct TimGp16(pub *mut u8);
+    unsafe impl Send for TimGp16 {}
+    unsafe impl Sync for TimGp16 {}
+    impl TimGp16 {
+        #[doc = "control register 1"]
+        pub fn cr1(self) -> Reg<regs::Cr1Gp, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "control register 2"]
+        pub fn cr2(self) -> Reg<regs::Cr2Gp, RW> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "slave mode control register"]
+        pub fn smcr(self) -> Reg<regs::Smcr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        }
+        #[doc = "DMA/Interrupt enable register"]
+        pub fn dier(self) -> Reg<regs::DierGp, RW> {
+            unsafe { Reg::from_ptr(self.0.add(12usize)) }
+        }
+        #[doc = "status register"]
+        pub fn sr(self) -> Reg<regs::SrGp, RW> {
+            unsafe { Reg::from_ptr(self.0.add(16usize)) }
+        }
+        #[doc = "event generation register"]
+        pub fn egr(self) -> Reg<regs::EgrGp, W> {
+            unsafe { Reg::from_ptr(self.0.add(20usize)) }
+        }
+        #[doc = "capture/compare mode register 1 (input mode)"]
+        pub fn ccmr_input(self, n: usize) -> Reg<regs::CcmrInput, RW> {
+            assert!(n < 2usize);
+            unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) }
+        }
+        #[doc = "capture/compare mode register 1 (output mode)"]
+        pub fn ccmr_output(self, n: usize) -> Reg<regs::CcmrOutput, RW> {
+            assert!(n < 2usize);
+            unsafe { Reg::from_ptr(self.0.add(24usize + n * 4usize)) }
+        }
+        #[doc = "capture/compare enable register"]
+        pub fn ccer(self) -> Reg<regs::CcerGp, RW> {
+            unsafe { Reg::from_ptr(self.0.add(32usize)) }
+        }
+        #[doc = "counter"]
+        pub fn cnt(self) -> Reg<regs::Cnt16, RW> {
+            unsafe { Reg::from_ptr(self.0.add(36usize)) }
+        }
+        #[doc = "prescaler"]
+        pub fn psc(self) -> Reg<regs::Psc, RW> {
+            unsafe { Reg::from_ptr(self.0.add(40usize)) }
+        }
+        #[doc = "auto-reload register"]
+        pub fn arr(self) -> Reg<regs::Arr16, RW> {
+            unsafe { Reg::from_ptr(self.0.add(44usize)) }
+        }
+        #[doc = "capture/compare register"]
+        pub fn ccr(self, n: usize) -> Reg<regs::Ccr16, RW> {
+            assert!(n < 4usize);
+            unsafe { Reg::from_ptr(self.0.add(52usize + n * 4usize)) }
+        }
+        #[doc = "DMA control register"]
+        pub fn dcr(self) -> Reg<regs::Dcr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(72usize)) }
+        }
+        #[doc = "DMA address for full transfer"]
+        pub fn dmar(self) -> Reg<regs::Dmar, RW> {
+            unsafe { Reg::from_ptr(self.0.add(76usize)) }
+        }
+    }
+    pub mod vals {
+        use crate::generic::*;
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Sms(pub u8);
+        impl Sms {
+            #[doc = "Slave mode disabled - if CEN = ‘1 then the prescaler is clocked directly by the internal clock."]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Encoder mode 1 - Counter counts up/down on TI2FP1 edge depending on TI1FP2 level."]
+            pub const ENCODER_MODE_1: Self = Self(0x01);
+            #[doc = "Encoder mode 2 - Counter counts up/down on TI1FP2 edge depending on TI2FP1 level."]
+            pub const ENCODER_MODE_2: Self = Self(0x02);
+            #[doc = "Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input."]
+            pub const ENCODER_MODE_3: Self = Self(0x03);
+            #[doc = "Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers."]
+            pub const RESET_MODE: Self = Self(0x04);
+            #[doc = "Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled."]
+            pub const GATED_MODE: Self = Self(0x05);
+            #[doc = "Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled."]
+            pub const TRIGGER_MODE: Self = Self(0x06);
+            #[doc = "External Clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter."]
+            pub const EXT_CLOCK_MODE: Self = Self(0x07);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ckd(pub u8);
+        impl Ckd {
+            #[doc = "t_DTS = t_CK_INT"]
+            pub const DIV1: Self = Self(0);
+            #[doc = "t_DTS = 2 × t_CK_INT"]
+            pub const DIV2: Self = Self(0x01);
+            #[doc = "t_DTS = 4 × t_CK_INT"]
+            pub const DIV4: Self = Self(0x02);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ocpe(pub u8);
+        impl Ocpe {
+            #[doc = "Preload register on CCR2 disabled. New values written to CCR2 are taken into account immediately"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Preload register on CCR2 enabled. Preload value is loaded into active register on each update event"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Opm(pub u8);
+        impl Opm {
+            #[doc = "Counter is not stopped at update event"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Counter stops counting at the next update event (clearing the CEN bit)"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Msm(pub u8);
+        impl Msm {
+            #[doc = "No action"]
+            pub const NOSYNC: Self = Self(0);
+            #[doc = "The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event."]
+            pub const SYNC: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ossi(pub u8);
+        impl Ossi {
+            #[doc = "When inactive, OC/OCN outputs are disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "When inactive, OC/OCN outputs are forced to idle level"]
+            pub const IDLELEVEL: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Icf(pub u8);
+        impl Icf {
+            #[doc = "No filter, sampling is done at fDTS"]
+            pub const NOFILTER: Self = Self(0);
+            #[doc = "fSAMPLING=fCK_INT, N=2"]
+            pub const FCK_INT_N2: Self = Self(0x01);
+            #[doc = "fSAMPLING=fCK_INT, N=4"]
+            pub const FCK_INT_N4: Self = Self(0x02);
+            #[doc = "fSAMPLING=fCK_INT, N=8"]
+            pub const FCK_INT_N8: Self = Self(0x03);
+            #[doc = "fSAMPLING=fDTS/2, N=6"]
+            pub const FDTS_DIV2_N6: Self = Self(0x04);
+            #[doc = "fSAMPLING=fDTS/2, N=8"]
+            pub const FDTS_DIV2_N8: Self = Self(0x05);
+            #[doc = "fSAMPLING=fDTS/4, N=6"]
+            pub const FDTS_DIV4_N6: Self = Self(0x06);
+            #[doc = "fSAMPLING=fDTS/4, N=8"]
+            pub const FDTS_DIV4_N8: Self = Self(0x07);
+            #[doc = "fSAMPLING=fDTS/8, N=6"]
+            pub const FDTS_DIV8_N6: Self = Self(0x08);
+            #[doc = "fSAMPLING=fDTS/8, N=8"]
+            pub const FDTS_DIV8_N8: Self = Self(0x09);
+            #[doc = "fSAMPLING=fDTS/16, N=5"]
+            pub const FDTS_DIV16_N5: Self = Self(0x0a);
+            #[doc = "fSAMPLING=fDTS/16, N=6"]
+            pub const FDTS_DIV16_N6: Self = Self(0x0b);
+            #[doc = "fSAMPLING=fDTS/16, N=8"]
+            pub const FDTS_DIV16_N8: Self = Self(0x0c);
+            #[doc = "fSAMPLING=fDTS/32, N=5"]
+            pub const FDTS_DIV32_N5: Self = Self(0x0d);
+            #[doc = "fSAMPLING=fDTS/32, N=6"]
+            pub const FDTS_DIV32_N6: Self = Self(0x0e);
+            #[doc = "fSAMPLING=fDTS/32, N=8"]
+            pub const FDTS_DIV32_N8: Self = Self(0x0f);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct CcmrInputCcs(pub u8);
+        impl CcmrInputCcs {
+            #[doc = "CCx channel is configured as input, normal mapping: ICx mapped to TIx"]
+            pub const TI4: Self = Self(0x01);
+            #[doc = "CCx channel is configured as input, alternate mapping (switches 1 with 2, 3 with 4)"]
+            pub const TI3: Self = Self(0x02);
+            #[doc = "CCx channel is configured as input, ICx is mapped on TRC"]
+            pub const TRC: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Mms(pub u8);
+        impl Mms {
+            #[doc = "The UG bit from the TIMx_EGR register is used as trigger output"]
+            pub const RESET: Self = Self(0);
+            #[doc = "The counter enable signal, CNT_EN, is used as trigger output"]
+            pub const ENABLE: Self = Self(0x01);
+            #[doc = "The update event is selected as trigger output"]
+            pub const UPDATE: Self = Self(0x02);
+            #[doc = "The trigger output send a positive pulse when the CC1IF flag it to be set, as soon as a capture or a compare match occurred"]
+            pub const COMPAREPULSE: Self = Self(0x03);
+            #[doc = "OC1REF signal is used as trigger output"]
+            pub const COMPAREOC1: Self = Self(0x04);
+            #[doc = "OC2REF signal is used as trigger output"]
+            pub const COMPAREOC2: Self = Self(0x05);
+            #[doc = "OC3REF signal is used as trigger output"]
+            pub const COMPAREOC3: Self = Self(0x06);
+            #[doc = "OC4REF signal is used as trigger output"]
+            pub const COMPAREOC4: Self = Self(0x07);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct CcmrOutputCcs(pub u8);
+        impl CcmrOutputCcs {
+            #[doc = "CCx channel is configured as output"]
+            pub const OUTPUT: Self = Self(0);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Etp(pub u8);
+        impl Etp {
+            #[doc = "ETR is noninverted, active at high level or rising edge"]
+            pub const NOTINVERTED: Self = Self(0);
+            #[doc = "ETR is inverted, active at low level or falling edge"]
+            pub const INVERTED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ossr(pub u8);
+        impl Ossr {
+            #[doc = "When inactive, OC/OCN outputs are disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "When inactive, OC/OCN outputs are enabled with their inactive level"]
+            pub const IDLELEVEL: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Etf(pub u8);
+        impl Etf {
+            #[doc = "No filter, sampling is done at fDTS"]
+            pub const NOFILTER: Self = Self(0);
+            #[doc = "fSAMPLING=fCK_INT, N=2"]
+            pub const FCK_INT_N2: Self = Self(0x01);
+            #[doc = "fSAMPLING=fCK_INT, N=4"]
+            pub const FCK_INT_N4: Self = Self(0x02);
+            #[doc = "fSAMPLING=fCK_INT, N=8"]
+            pub const FCK_INT_N8: Self = Self(0x03);
+            #[doc = "fSAMPLING=fDTS/2, N=6"]
+            pub const FDTS_DIV2_N6: Self = Self(0x04);
+            #[doc = "fSAMPLING=fDTS/2, N=8"]
+            pub const FDTS_DIV2_N8: Self = Self(0x05);
+            #[doc = "fSAMPLING=fDTS/4, N=6"]
+            pub const FDTS_DIV4_N6: Self = Self(0x06);
+            #[doc = "fSAMPLING=fDTS/4, N=8"]
+            pub const FDTS_DIV4_N8: Self = Self(0x07);
+            #[doc = "fSAMPLING=fDTS/8, N=6"]
+            pub const FDTS_DIV8_N6: Self = Self(0x08);
+            #[doc = "fSAMPLING=fDTS/8, N=8"]
+            pub const FDTS_DIV8_N8: Self = Self(0x09);
+            #[doc = "fSAMPLING=fDTS/16, N=5"]
+            pub const FDTS_DIV16_N5: Self = Self(0x0a);
+            #[doc = "fSAMPLING=fDTS/16, N=6"]
+            pub const FDTS_DIV16_N6: Self = Self(0x0b);
+            #[doc = "fSAMPLING=fDTS/16, N=8"]
+            pub const FDTS_DIV16_N8: Self = Self(0x0c);
+            #[doc = "fSAMPLING=fDTS/32, N=5"]
+            pub const FDTS_DIV32_N5: Self = Self(0x0d);
+            #[doc = "fSAMPLING=fDTS/32, N=6"]
+            pub const FDTS_DIV32_N6: Self = Self(0x0e);
+            #[doc = "fSAMPLING=fDTS/32, N=8"]
+            pub const FDTS_DIV32_N8: Self = Self(0x0f);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Arpe(pub u8);
+        impl Arpe {
+            #[doc = "TIMx_APRR register is not buffered"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "TIMx_APRR register is buffered"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ts(pub u8);
+        impl Ts {
+            #[doc = "Internal Trigger 0 (ITR0)"]
+            pub const ITR0: Self = Self(0);
+            #[doc = "Internal Trigger 1 (ITR1)"]
+            pub const ITR1: Self = Self(0x01);
+            #[doc = "Internal Trigger 2 (ITR2)"]
+            pub const ITR2: Self = Self(0x02);
+            #[doc = "TI1 Edge Detector (TI1F_ED)"]
+            pub const TI1F_ED: Self = Self(0x04);
+            #[doc = "Filtered Timer Input 1 (TI1FP1)"]
+            pub const TI1FP1: Self = Self(0x05);
+            #[doc = "Filtered Timer Input 2 (TI2FP2)"]
+            pub const TI2FP2: Self = Self(0x06);
+            #[doc = "External Trigger input (ETRF)"]
+            pub const ETRF: Self = Self(0x07);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Tis(pub u8);
+        impl Tis {
+            #[doc = "The TIMx_CH1 pin is connected to TI1 input"]
+            pub const NORMAL: Self = Self(0);
+            #[doc = "The TIMx_CH1, CH2, CH3 pins are connected to TI1 input"]
+            pub const XOR: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ccds(pub u8);
+        impl Ccds {
+            #[doc = "CCx DMA request sent when CCx event occurs"]
+            pub const ONCOMPARE: Self = Self(0);
+            #[doc = "CCx DMA request sent when update event occurs"]
+            pub const ONUPDATE: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ece(pub u8);
+        impl Ece {
+            #[doc = "External clock mode 2 disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "External clock mode 2 enabled. The counter is clocked by any active edge on the ETRF signal."]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ocm(pub u8);
+        impl Ocm {
+            #[doc = "The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs"]
+            pub const FROZEN: Self = Self(0);
+            #[doc = "Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register"]
+            pub const ACTIVEONMATCH: Self = Self(0x01);
+            #[doc = "Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register"]
+            pub const INACTIVEONMATCH: Self = Self(0x02);
+            #[doc = "OCyREF toggles when TIMx_CNT=TIMx_CCRy"]
+            pub const TOGGLE: Self = Self(0x03);
+            #[doc = "OCyREF is forced low"]
+            pub const FORCEINACTIVE: Self = Self(0x04);
+            #[doc = "OCyREF is forced high"]
+            pub const FORCEACTIVE: Self = Self(0x05);
+            #[doc = "In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active"]
+            pub const PWMMODE1: Self = Self(0x06);
+            #[doc = "Inversely to PwmMode1"]
+            pub const PWMMODE2: Self = Self(0x07);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Urs(pub u8);
+        impl Urs {
+            #[doc = "Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request"]
+            pub const ANYEVENT: Self = Self(0);
+            #[doc = "Only counter overflow/underflow generates an update interrupt or DMA request"]
+            pub const COUNTERONLY: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Cms(pub u8);
+        impl Cms {
+            #[doc = "The counter counts up or down depending on the direction bit"]
+            pub const EDGEALIGNED: Self = Self(0);
+            #[doc = "The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down."]
+            pub const CENTERALIGNED1: Self = Self(0x01);
+            #[doc = "The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up."]
+            pub const CENTERALIGNED2: Self = Self(0x02);
+            #[doc = "The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down."]
+            pub const CENTERALIGNED3: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Dir(pub u8);
+        impl Dir {
+            #[doc = "Counter used as upcounter"]
+            pub const UP: Self = Self(0);
+            #[doc = "Counter used as downcounter"]
+            pub const DOWN: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Etps(pub u8);
+        impl Etps {
+            #[doc = "Prescaler OFF"]
+            pub const DIV1: Self = Self(0);
+            #[doc = "ETRP frequency divided by 2"]
+            pub const DIV2: Self = Self(0x01);
+            #[doc = "ETRP frequency divided by 4"]
+            pub const DIV4: Self = Self(0x02);
+            #[doc = "ETRP frequency divided by 8"]
+            pub const DIV8: Self = Self(0x03);
+        }
+    }
+    pub mod regs {
+        use crate::generic::*;
+        #[doc = "control register 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr1Basic(pub u32);
+        impl Cr1Basic {
+            #[doc = "Counter enable"]
+            pub const fn cen(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Counter enable"]
+            pub fn set_cen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Update disable"]
+            pub const fn udis(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Update disable"]
+            pub fn set_udis(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Update request source"]
+            pub const fn urs(&self) -> super::vals::Urs {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Urs(val as u8)
+            }
+            #[doc = "Update request source"]
+            pub fn set_urs(&mut self, val: super::vals::Urs) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "One-pulse mode"]
+            pub const fn opm(&self) -> super::vals::Opm {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Opm(val as u8)
+            }
+            #[doc = "One-pulse mode"]
+            pub fn set_opm(&mut self, val: super::vals::Opm) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Auto-reload preload enable"]
+            pub const fn arpe(&self) -> super::vals::Arpe {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Arpe(val as u8)
+            }
+            #[doc = "Auto-reload preload enable"]
+            pub fn set_arpe(&mut self, val: super::vals::Arpe) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+        }
+        impl Default for Cr1Basic {
+            fn default() -> Cr1Basic {
+                Cr1Basic(0)
+            }
+        }
+        #[doc = "slave mode control register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Smcr(pub u32);
+        impl Smcr {
+            #[doc = "Slave mode selection"]
+            pub const fn sms(&self) -> super::vals::Sms {
+                let val = (self.0 >> 0usize) & 0x07;
+                super::vals::Sms(val as u8)
+            }
+            #[doc = "Slave mode selection"]
+            pub fn set_sms(&mut self, val: super::vals::Sms) {
+                self.0 = (self.0 & !(0x07 << 0usize)) | (((val.0 as u32) & 0x07) << 0usize);
+            }
+            #[doc = "Trigger selection"]
+            pub const fn ts(&self) -> super::vals::Ts {
+                let val = (self.0 >> 4usize) & 0x07;
+                super::vals::Ts(val as u8)
+            }
+            #[doc = "Trigger selection"]
+            pub fn set_ts(&mut self, val: super::vals::Ts) {
+                self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize);
+            }
+            #[doc = "Master/Slave mode"]
+            pub const fn msm(&self) -> super::vals::Msm {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Msm(val as u8)
+            }
+            #[doc = "Master/Slave mode"]
+            pub fn set_msm(&mut self, val: super::vals::Msm) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "External trigger filter"]
+            pub const fn etf(&self) -> super::vals::Etf {
+                let val = (self.0 >> 8usize) & 0x0f;
+                super::vals::Etf(val as u8)
+            }
+            #[doc = "External trigger filter"]
+            pub fn set_etf(&mut self, val: super::vals::Etf) {
+                self.0 = (self.0 & !(0x0f << 8usize)) | (((val.0 as u32) & 0x0f) << 8usize);
+            }
+            #[doc = "External trigger prescaler"]
+            pub const fn etps(&self) -> super::vals::Etps {
+                let val = (self.0 >> 12usize) & 0x03;
+                super::vals::Etps(val as u8)
+            }
+            #[doc = "External trigger prescaler"]
+            pub fn set_etps(&mut self, val: super::vals::Etps) {
+                self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize);
+            }
+            #[doc = "External clock enable"]
+            pub const fn ece(&self) -> super::vals::Ece {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Ece(val as u8)
+            }
+            #[doc = "External clock enable"]
+            pub fn set_ece(&mut self, val: super::vals::Ece) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "External trigger polarity"]
+            pub const fn etp(&self) -> super::vals::Etp {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Etp(val as u8)
+            }
+            #[doc = "External trigger polarity"]
+            pub fn set_etp(&mut self, val: super::vals::Etp) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+        }
+        impl Default for Smcr {
+            fn default() -> Smcr {
+                Smcr(0)
+            }
+        }
+        #[doc = "DMA address for full transfer"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Dmar(pub u32);
+        impl Dmar {
+            #[doc = "DMA register for burst accesses"]
+            pub const fn dmab(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "DMA register for burst accesses"]
+            pub fn set_dmab(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+        }
+        impl Default for Dmar {
+            fn default() -> Dmar {
+                Dmar(0)
+            }
+        }
+        #[doc = "event generation register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct EgrGp(pub u32);
+        impl EgrGp {
+            #[doc = "Update generation"]
+            pub const fn ug(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Update generation"]
+            pub fn set_ug(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Capture/compare 1 generation"]
+            pub fn ccg(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/compare 1 generation"]
+            pub fn set_ccg(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Capture/Compare control update generation"]
+            pub const fn comg(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/Compare control update generation"]
+            pub fn set_comg(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Trigger generation"]
+            pub const fn tg(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Trigger generation"]
+            pub fn set_tg(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Break generation"]
+            pub const fn bg(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Break generation"]
+            pub fn set_bg(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+        }
+        impl Default for EgrGp {
+            fn default() -> EgrGp {
+                EgrGp(0)
+            }
+        }
+        #[doc = "counter"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cnt16(pub u32);
+        impl Cnt16 {
+            #[doc = "counter value"]
+            pub const fn cnt(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "counter value"]
+            pub fn set_cnt(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+        }
+        impl Default for Cnt16 {
+            fn default() -> Cnt16 {
+                Cnt16(0)
+            }
+        }
+        #[doc = "capture/compare enable register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct CcerAdv(pub u32);
+        impl CcerAdv {
+            #[doc = "Capture/Compare 1 output enable"]
+            pub fn cce(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 0usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/Compare 1 output enable"]
+            pub fn set_cce(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 0usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Capture/Compare 1 output Polarity"]
+            pub fn ccp(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/Compare 1 output Polarity"]
+            pub fn set_ccp(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Capture/Compare 1 complementary output enable"]
+            pub fn ccne(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 2usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/Compare 1 complementary output enable"]
+            pub fn set_ccne(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 2usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Capture/Compare 1 output Polarity"]
+            pub fn ccnp(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 3usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/Compare 1 output Polarity"]
+            pub fn set_ccnp(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 3usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for CcerAdv {
+            fn default() -> CcerAdv {
+                CcerAdv(0)
+            }
+        }
+        #[doc = "capture/compare mode register 2 (output mode)"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct CcmrOutput(pub u32);
+        impl CcmrOutput {
+            #[doc = "Capture/Compare 3 selection"]
+            pub fn ccs(&self, n: usize) -> super::vals::CcmrOutputCcs {
+                assert!(n < 2usize);
+                let offs = 0usize + n * 8usize;
+                let val = (self.0 >> offs) & 0x03;
+                super::vals::CcmrOutputCcs(val as u8)
+            }
+            #[doc = "Capture/Compare 3 selection"]
+            pub fn set_ccs(&mut self, n: usize, val: super::vals::CcmrOutputCcs) {
+                assert!(n < 2usize);
+                let offs = 0usize + n * 8usize;
+                self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs);
+            }
+            #[doc = "Output compare 3 fast enable"]
+            pub fn ocfe(&self, n: usize) -> bool {
+                assert!(n < 2usize);
+                let offs = 2usize + n * 8usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Output compare 3 fast enable"]
+            pub fn set_ocfe(&mut self, n: usize, val: bool) {
+                assert!(n < 2usize);
+                let offs = 2usize + n * 8usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Output compare 3 preload enable"]
+            pub fn ocpe(&self, n: usize) -> super::vals::Ocpe {
+                assert!(n < 2usize);
+                let offs = 3usize + n * 8usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Ocpe(val as u8)
+            }
+            #[doc = "Output compare 3 preload enable"]
+            pub fn set_ocpe(&mut self, n: usize, val: super::vals::Ocpe) {
+                assert!(n < 2usize);
+                let offs = 3usize + n * 8usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+            #[doc = "Output compare 3 mode"]
+            pub fn ocm(&self, n: usize) -> super::vals::Ocm {
+                assert!(n < 2usize);
+                let offs = 4usize + n * 8usize;
+                let val = (self.0 >> offs) & 0x07;
+                super::vals::Ocm(val as u8)
+            }
+            #[doc = "Output compare 3 mode"]
+            pub fn set_ocm(&mut self, n: usize, val: super::vals::Ocm) {
+                assert!(n < 2usize);
+                let offs = 4usize + n * 8usize;
+                self.0 = (self.0 & !(0x07 << offs)) | (((val.0 as u32) & 0x07) << offs);
+            }
+            #[doc = "Output compare 3 clear enable"]
+            pub fn occe(&self, n: usize) -> bool {
+                assert!(n < 2usize);
+                let offs = 7usize + n * 8usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Output compare 3 clear enable"]
+            pub fn set_occe(&mut self, n: usize, val: bool) {
+                assert!(n < 2usize);
+                let offs = 7usize + n * 8usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for CcmrOutput {
+            fn default() -> CcmrOutput {
+                CcmrOutput(0)
+            }
+        }
+        #[doc = "status register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct SrGp(pub u32);
+        impl SrGp {
+            #[doc = "Update interrupt flag"]
+            pub const fn uif(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Update interrupt flag"]
+            pub fn set_uif(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Capture/compare 1 interrupt flag"]
+            pub fn ccif(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/compare 1 interrupt flag"]
+            pub fn set_ccif(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "COM interrupt flag"]
+            pub const fn comif(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "COM interrupt flag"]
+            pub fn set_comif(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Trigger interrupt flag"]
+            pub const fn tif(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Trigger interrupt flag"]
+            pub fn set_tif(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Break interrupt flag"]
+            pub const fn bif(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Break interrupt flag"]
+            pub fn set_bif(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Capture/Compare 1 overcapture flag"]
+            pub fn ccof(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 9usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/Compare 1 overcapture flag"]
+            pub fn set_ccof(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 9usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for SrGp {
+            fn default() -> SrGp {
+                SrGp(0)
+            }
+        }
+        #[doc = "event generation register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct EgrAdv(pub u32);
+        impl EgrAdv {
+            #[doc = "Update generation"]
+            pub const fn ug(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Update generation"]
+            pub fn set_ug(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Capture/compare 1 generation"]
+            pub fn ccg(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/compare 1 generation"]
+            pub fn set_ccg(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Capture/Compare control update generation"]
+            pub const fn comg(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/Compare control update generation"]
+            pub fn set_comg(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Trigger generation"]
+            pub const fn tg(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Trigger generation"]
+            pub fn set_tg(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Break generation"]
+            pub const fn bg(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Break generation"]
+            pub fn set_bg(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+        }
+        impl Default for EgrAdv {
+            fn default() -> EgrAdv {
+                EgrAdv(0)
+            }
+        }
+        #[doc = "capture/compare register 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ccr32(pub u32);
+        impl Ccr32 {
+            #[doc = "Capture/Compare 1 value"]
+            pub const fn ccr(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
+            }
+            #[doc = "Capture/Compare 1 value"]
+            pub fn set_ccr(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            }
+        }
+        impl Default for Ccr32 {
+            fn default() -> Ccr32 {
+                Ccr32(0)
+            }
+        }
+        #[doc = "capture/compare register 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ccr16(pub u32);
+        impl Ccr16 {
+            #[doc = "Capture/Compare 1 value"]
+            pub const fn ccr(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "Capture/Compare 1 value"]
+            pub fn set_ccr(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+        }
+        impl Default for Ccr16 {
+            fn default() -> Ccr16 {
+                Ccr16(0)
+            }
+        }
+        #[doc = "break and dead-time register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Bdtr(pub u32);
+        impl Bdtr {
+            #[doc = "Dead-time generator setup"]
+            pub const fn dtg(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Dead-time generator setup"]
+            pub fn set_dtg(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
+            }
+            #[doc = "Lock configuration"]
+            pub const fn lock(&self) -> u8 {
+                let val = (self.0 >> 8usize) & 0x03;
+                val as u8
+            }
+            #[doc = "Lock configuration"]
+            pub fn set_lock(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 8usize)) | (((val as u32) & 0x03) << 8usize);
+            }
+            #[doc = "Off-state selection for Idle mode"]
+            pub const fn ossi(&self) -> super::vals::Ossi {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::Ossi(val as u8)
+            }
+            #[doc = "Off-state selection for Idle mode"]
+            pub fn set_ossi(&mut self, val: super::vals::Ossi) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "Off-state selection for Run mode"]
+            pub const fn ossr(&self) -> super::vals::Ossr {
+                let val = (self.0 >> 11usize) & 0x01;
+                super::vals::Ossr(val as u8)
+            }
+            #[doc = "Off-state selection for Run mode"]
+            pub fn set_ossr(&mut self, val: super::vals::Ossr) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
+            }
+            #[doc = "Break enable"]
+            pub const fn bke(&self) -> bool {
+                let val = (self.0 >> 12usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Break enable"]
+            pub fn set_bke(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
+            }
+            #[doc = "Break polarity"]
+            pub const fn bkp(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Break polarity"]
+            pub fn set_bkp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+            #[doc = "Automatic output enable"]
+            pub const fn aoe(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Automatic output enable"]
+            pub fn set_aoe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+            #[doc = "Main output enable"]
+            pub const fn moe(&self) -> bool {
+                let val = (self.0 >> 15usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Main output enable"]
+            pub fn set_moe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
+            }
+        }
+        impl Default for Bdtr {
+            fn default() -> Bdtr {
+                Bdtr(0)
+            }
+        }
+        #[doc = "control register 2"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr2Gp(pub u32);
+        impl Cr2Gp {
+            #[doc = "Capture/compare DMA selection"]
+            pub const fn ccds(&self) -> super::vals::Ccds {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Ccds(val as u8)
+            }
+            #[doc = "Capture/compare DMA selection"]
+            pub fn set_ccds(&mut self, val: super::vals::Ccds) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Master mode selection"]
+            pub const fn mms(&self) -> super::vals::Mms {
+                let val = (self.0 >> 4usize) & 0x07;
+                super::vals::Mms(val as u8)
+            }
+            #[doc = "Master mode selection"]
+            pub fn set_mms(&mut self, val: super::vals::Mms) {
+                self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize);
+            }
+            #[doc = "TI1 selection"]
+            pub const fn ti1s(&self) -> super::vals::Tis {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Tis(val as u8)
+            }
+            #[doc = "TI1 selection"]
+            pub fn set_ti1s(&mut self, val: super::vals::Tis) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+        }
+        impl Default for Cr2Gp {
+            fn default() -> Cr2Gp {
+                Cr2Gp(0)
+            }
+        }
+        #[doc = "DMA/Interrupt enable register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct DierAdv(pub u32);
+        impl DierAdv {
+            #[doc = "Update interrupt enable"]
+            pub const fn uie(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Update interrupt enable"]
+            pub fn set_uie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Capture/Compare 1 interrupt enable"]
+            pub fn ccie(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/Compare 1 interrupt enable"]
+            pub fn set_ccie(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "COM interrupt enable"]
+            pub const fn comie(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "COM interrupt enable"]
+            pub fn set_comie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Trigger interrupt enable"]
+            pub const fn tie(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Trigger interrupt enable"]
+            pub fn set_tie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Break interrupt enable"]
+            pub const fn bie(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Break interrupt enable"]
+            pub fn set_bie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Update DMA request enable"]
+            pub const fn ude(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Update DMA request enable"]
+            pub fn set_ude(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Capture/Compare 1 DMA request enable"]
+            pub fn ccde(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 9usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/Compare 1 DMA request enable"]
+            pub fn set_ccde(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 9usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "COM DMA request enable"]
+            pub const fn comde(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "COM DMA request enable"]
+            pub fn set_comde(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+            #[doc = "Trigger DMA request enable"]
+            pub const fn tde(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Trigger DMA request enable"]
+            pub fn set_tde(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+        }
+        impl Default for DierAdv {
+            fn default() -> DierAdv {
+                DierAdv(0)
+            }
+        }
+        #[doc = "status register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct SrBasic(pub u32);
+        impl SrBasic {
+            #[doc = "Update interrupt flag"]
+            pub const fn uif(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Update interrupt flag"]
+            pub fn set_uif(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+        }
+        impl Default for SrBasic {
+            fn default() -> SrBasic {
+                SrBasic(0)
+            }
+        }
+        #[doc = "prescaler"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Psc(pub u32);
+        impl Psc {
+            #[doc = "Prescaler value"]
+            pub const fn psc(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "Prescaler value"]
+            pub fn set_psc(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+        }
+        impl Default for Psc {
+            fn default() -> Psc {
+                Psc(0)
+            }
+        }
+        #[doc = "control register 2"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr2Basic(pub u32);
+        impl Cr2Basic {
+            #[doc = "Master mode selection"]
+            pub const fn mms(&self) -> super::vals::Mms {
+                let val = (self.0 >> 4usize) & 0x07;
+                super::vals::Mms(val as u8)
+            }
+            #[doc = "Master mode selection"]
+            pub fn set_mms(&mut self, val: super::vals::Mms) {
+                self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize);
+            }
+        }
+        impl Default for Cr2Basic {
+            fn default() -> Cr2Basic {
+                Cr2Basic(0)
+            }
+        }
+        #[doc = "control register 2"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr2Adv(pub u32);
+        impl Cr2Adv {
+            #[doc = "Capture/compare preloaded control"]
+            pub const fn ccpc(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/compare preloaded control"]
+            pub fn set_ccpc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Capture/compare control update selection"]
+            pub const fn ccus(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/compare control update selection"]
+            pub fn set_ccus(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Capture/compare DMA selection"]
+            pub const fn ccds(&self) -> super::vals::Ccds {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Ccds(val as u8)
+            }
+            #[doc = "Capture/compare DMA selection"]
+            pub fn set_ccds(&mut self, val: super::vals::Ccds) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Master mode selection"]
+            pub const fn mms(&self) -> super::vals::Mms {
+                let val = (self.0 >> 4usize) & 0x07;
+                super::vals::Mms(val as u8)
+            }
+            #[doc = "Master mode selection"]
+            pub fn set_mms(&mut self, val: super::vals::Mms) {
+                self.0 = (self.0 & !(0x07 << 4usize)) | (((val.0 as u32) & 0x07) << 4usize);
+            }
+            #[doc = "TI1 selection"]
+            pub const fn ti1s(&self) -> super::vals::Tis {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Tis(val as u8)
+            }
+            #[doc = "TI1 selection"]
+            pub fn set_ti1s(&mut self, val: super::vals::Tis) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Output Idle state 1"]
+            pub fn ois(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 8usize + n * 2usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Output Idle state 1"]
+            pub fn set_ois(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 8usize + n * 2usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Output Idle state 1"]
+            pub const fn ois1n(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Output Idle state 1"]
+            pub fn set_ois1n(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "Output Idle state 2"]
+            pub const fn ois2n(&self) -> bool {
+                let val = (self.0 >> 11usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Output Idle state 2"]
+            pub fn set_ois2n(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
+            }
+            #[doc = "Output Idle state 3"]
+            pub const fn ois3n(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Output Idle state 3"]
+            pub fn set_ois3n(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+        }
+        impl Default for Cr2Adv {
+            fn default() -> Cr2Adv {
+                Cr2Adv(0)
+            }
+        }
+        #[doc = "DMA/Interrupt enable register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct DierBasic(pub u32);
+        impl DierBasic {
+            #[doc = "Update interrupt enable"]
+            pub const fn uie(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Update interrupt enable"]
+            pub fn set_uie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Update DMA request enable"]
+            pub const fn ude(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Update DMA request enable"]
+            pub fn set_ude(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+        }
+        impl Default for DierBasic {
+            fn default() -> DierBasic {
+                DierBasic(0)
+            }
+        }
+        #[doc = "auto-reload register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Arr32(pub u32);
+        impl Arr32 {
+            #[doc = "Auto-reload value"]
+            pub const fn arr(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
+            }
+            #[doc = "Auto-reload value"]
+            pub fn set_arr(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            }
+        }
+        impl Default for Arr32 {
+            fn default() -> Arr32 {
+                Arr32(0)
+            }
+        }
+        #[doc = "capture/compare enable register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct CcerGp(pub u32);
+        impl CcerGp {
+            #[doc = "Capture/Compare 1 output enable"]
+            pub fn cce(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 0usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/Compare 1 output enable"]
+            pub fn set_cce(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 0usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Capture/Compare 1 output Polarity"]
+            pub fn ccp(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/Compare 1 output Polarity"]
+            pub fn set_ccp(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Capture/Compare 1 output Polarity"]
+            pub fn ccnp(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 3usize + n * 4usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/Compare 1 output Polarity"]
+            pub fn set_ccnp(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 3usize + n * 4usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for CcerGp {
+            fn default() -> CcerGp {
+                CcerGp(0)
+            }
+        }
+        #[doc = "event generation register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct EgrBasic(pub u32);
+        impl EgrBasic {
+            #[doc = "Update generation"]
+            pub const fn ug(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Update generation"]
+            pub fn set_ug(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+        }
+        impl Default for EgrBasic {
+            fn default() -> EgrBasic {
+                EgrBasic(0)
+            }
+        }
+        #[doc = "counter"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cnt32(pub u32);
+        impl Cnt32 {
+            #[doc = "counter value"]
+            pub const fn cnt(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
+            }
+            #[doc = "counter value"]
+            pub fn set_cnt(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            }
+        }
+        impl Default for Cnt32 {
+            fn default() -> Cnt32 {
+                Cnt32(0)
+            }
+        }
+        #[doc = "DMA/Interrupt enable register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct DierGp(pub u32);
+        impl DierGp {
+            #[doc = "Update interrupt enable"]
+            pub const fn uie(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Update interrupt enable"]
+            pub fn set_uie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Capture/Compare 1 interrupt enable"]
+            pub fn ccie(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/Compare 1 interrupt enable"]
+            pub fn set_ccie(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Trigger interrupt enable"]
+            pub const fn tie(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Trigger interrupt enable"]
+            pub fn set_tie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Update DMA request enable"]
+            pub const fn ude(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Update DMA request enable"]
+            pub fn set_ude(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Capture/Compare 1 DMA request enable"]
+            pub fn ccde(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 9usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/Compare 1 DMA request enable"]
+            pub fn set_ccde(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 9usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Trigger DMA request enable"]
+            pub const fn tde(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Trigger DMA request enable"]
+            pub fn set_tde(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+        }
+        impl Default for DierGp {
+            fn default() -> DierGp {
+                DierGp(0)
+            }
+        }
+        #[doc = "capture/compare mode register 1 (input mode)"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct CcmrInput(pub u32);
+        impl CcmrInput {
+            #[doc = "Capture/Compare 1 selection"]
+            pub fn ccs(&self, n: usize) -> super::vals::CcmrInputCcs {
+                assert!(n < 2usize);
+                let offs = 0usize + n * 8usize;
+                let val = (self.0 >> offs) & 0x03;
+                super::vals::CcmrInputCcs(val as u8)
+            }
+            #[doc = "Capture/Compare 1 selection"]
+            pub fn set_ccs(&mut self, n: usize, val: super::vals::CcmrInputCcs) {
+                assert!(n < 2usize);
+                let offs = 0usize + n * 8usize;
+                self.0 = (self.0 & !(0x03 << offs)) | (((val.0 as u32) & 0x03) << offs);
+            }
+            #[doc = "Input capture 1 prescaler"]
+            pub fn icpsc(&self, n: usize) -> u8 {
+                assert!(n < 2usize);
+                let offs = 2usize + n * 8usize;
+                let val = (self.0 >> offs) & 0x03;
+                val as u8
+            }
+            #[doc = "Input capture 1 prescaler"]
+            pub fn set_icpsc(&mut self, n: usize, val: u8) {
+                assert!(n < 2usize);
+                let offs = 2usize + n * 8usize;
+                self.0 = (self.0 & !(0x03 << offs)) | (((val as u32) & 0x03) << offs);
+            }
+            #[doc = "Input capture 1 filter"]
+            pub fn icf(&self, n: usize) -> super::vals::Icf {
+                assert!(n < 2usize);
+                let offs = 4usize + n * 8usize;
+                let val = (self.0 >> offs) & 0x0f;
+                super::vals::Icf(val as u8)
+            }
+            #[doc = "Input capture 1 filter"]
+            pub fn set_icf(&mut self, n: usize, val: super::vals::Icf) {
+                assert!(n < 2usize);
+                let offs = 4usize + n * 8usize;
+                self.0 = (self.0 & !(0x0f << offs)) | (((val.0 as u32) & 0x0f) << offs);
+            }
+        }
+        impl Default for CcmrInput {
+            fn default() -> CcmrInput {
+                CcmrInput(0)
+            }
+        }
+        #[doc = "repetition counter register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Rcr(pub u32);
+        impl Rcr {
+            #[doc = "Repetition counter value"]
+            pub const fn rep(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Repetition counter value"]
+            pub fn set_rep(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
+            }
+        }
+        impl Default for Rcr {
+            fn default() -> Rcr {
+                Rcr(0)
+            }
+        }
+        #[doc = "status register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct SrAdv(pub u32);
+        impl SrAdv {
+            #[doc = "Update interrupt flag"]
+            pub const fn uif(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Update interrupt flag"]
+            pub fn set_uif(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Capture/compare 1 interrupt flag"]
+            pub fn ccif(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/compare 1 interrupt flag"]
+            pub fn set_ccif(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 1usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "COM interrupt flag"]
+            pub const fn comif(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "COM interrupt flag"]
+            pub fn set_comif(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Trigger interrupt flag"]
+            pub const fn tif(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Trigger interrupt flag"]
+            pub fn set_tif(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Break interrupt flag"]
+            pub const fn bif(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Break interrupt flag"]
+            pub fn set_bif(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Capture/Compare 1 overcapture flag"]
+            pub fn ccof(&self, n: usize) -> bool {
+                assert!(n < 4usize);
+                let offs = 9usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Capture/Compare 1 overcapture flag"]
+            pub fn set_ccof(&mut self, n: usize, val: bool) {
+                assert!(n < 4usize);
+                let offs = 9usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for SrAdv {
+            fn default() -> SrAdv {
+                SrAdv(0)
+            }
+        }
+        #[doc = "DMA control register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Dcr(pub u32);
+        impl Dcr {
+            #[doc = "DMA base address"]
+            pub const fn dba(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0x1f;
+                val as u8
+            }
+            #[doc = "DMA base address"]
+            pub fn set_dba(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x1f << 0usize)) | (((val as u32) & 0x1f) << 0usize);
+            }
+            #[doc = "DMA burst length"]
+            pub const fn dbl(&self) -> u8 {
+                let val = (self.0 >> 8usize) & 0x1f;
+                val as u8
+            }
+            #[doc = "DMA burst length"]
+            pub fn set_dbl(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x1f << 8usize)) | (((val as u32) & 0x1f) << 8usize);
+            }
+        }
+        impl Default for Dcr {
+            fn default() -> Dcr {
+                Dcr(0)
+            }
+        }
+        #[doc = "control register 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr1Gp(pub u32);
+        impl Cr1Gp {
+            #[doc = "Counter enable"]
+            pub const fn cen(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Counter enable"]
+            pub fn set_cen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Update disable"]
+            pub const fn udis(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Update disable"]
+            pub fn set_udis(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Update request source"]
+            pub const fn urs(&self) -> super::vals::Urs {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Urs(val as u8)
+            }
+            #[doc = "Update request source"]
+            pub fn set_urs(&mut self, val: super::vals::Urs) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "One-pulse mode"]
+            pub const fn opm(&self) -> super::vals::Opm {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Opm(val as u8)
+            }
+            #[doc = "One-pulse mode"]
+            pub fn set_opm(&mut self, val: super::vals::Opm) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Direction"]
+            pub const fn dir(&self) -> super::vals::Dir {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Dir(val as u8)
+            }
+            #[doc = "Direction"]
+            pub fn set_dir(&mut self, val: super::vals::Dir) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Center-aligned mode selection"]
+            pub const fn cms(&self) -> super::vals::Cms {
+                let val = (self.0 >> 5usize) & 0x03;
+                super::vals::Cms(val as u8)
+            }
+            #[doc = "Center-aligned mode selection"]
+            pub fn set_cms(&mut self, val: super::vals::Cms) {
+                self.0 = (self.0 & !(0x03 << 5usize)) | (((val.0 as u32) & 0x03) << 5usize);
+            }
+            #[doc = "Auto-reload preload enable"]
+            pub const fn arpe(&self) -> super::vals::Arpe {
+                let val = (self.0 >> 7usize) & 0x01;
+                super::vals::Arpe(val as u8)
+            }
+            #[doc = "Auto-reload preload enable"]
+            pub fn set_arpe(&mut self, val: super::vals::Arpe) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val.0 as u32) & 0x01) << 7usize);
+            }
+            #[doc = "Clock division"]
+            pub const fn ckd(&self) -> super::vals::Ckd {
+                let val = (self.0 >> 8usize) & 0x03;
+                super::vals::Ckd(val as u8)
+            }
+            #[doc = "Clock division"]
+            pub fn set_ckd(&mut self, val: super::vals::Ckd) {
+                self.0 = (self.0 & !(0x03 << 8usize)) | (((val.0 as u32) & 0x03) << 8usize);
+            }
+        }
+        impl Default for Cr1Gp {
+            fn default() -> Cr1Gp {
+                Cr1Gp(0)
+            }
+        }
+        #[doc = "auto-reload register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Arr16(pub u32);
+        impl Arr16 {
+            #[doc = "Auto-reload value"]
+            pub const fn arr(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "Auto-reload value"]
+            pub fn set_arr(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+        }
+        impl Default for Arr16 {
+            fn default() -> Arr16 {
+                Arr16(0)
+            }
+        }
+    }
+}
+pub mod pwr_h7 {
+    use crate::generic::*;
+    #[doc = "PWR"]
+    #[derive(Copy, Clone)]
+    pub struct Pwr(pub *mut u8);
+    unsafe impl Send for Pwr {}
+    unsafe impl Sync for Pwr {}
+    impl Pwr {
+        #[doc = "PWR control register 1"]
+        pub fn cr1(self) -> Reg<regs::Cr1, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "PWR control status register 1"]
+        pub fn csr1(self) -> Reg<regs::Csr1, R> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "This register is not reset by wakeup from Standby mode, RESET signal and VDD POR. It is only reset by VSW POR and VSWRST reset. This register shall not be accessed when VSWRST bit in RCC_BDCR register resets the VSW domain.After reset, PWR_CR2 register is write-protected. Prior to modifying its content, the DBP bit in PWR_CR1 register must be set to disable the write protection."]
+        pub fn cr2(self) -> Reg<regs::Cr2, RW> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        }
+        #[doc = "Reset only by POR only, not reset by wakeup from Standby mode and RESET pad. The lower byte of this register is written once after POR and shall be written before changing VOS level or ck_sys clock frequency. No limitation applies to the upper bytes.Programming data corresponding to an invalid combination of SDLEVEL, SDEXTHP, SDEN, LDOEN and BYPASS bits (see Table9) will be ignored: data will not be written, the written-once mechanism will lock the register and any further write access will be ignored. The default supply configuration will be kept and the ACTVOSRDY bit in PWR control status register 1 (PWR_CSR1) will go on indicating invalid voltage levels. The system shall be power cycled before writing a new value."]
+        pub fn cr3(self) -> Reg<regs::Cr3, RW> {
+            unsafe { Reg::from_ptr(self.0.add(12usize)) }
+        }
+        #[doc = "This register allows controlling CPU1 power."]
+        pub fn cpucr(self) -> Reg<regs::Cpucr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(16usize)) }
+        }
+        #[doc = "This register allows controlling D3 domain power.Following reset VOSRDY will be read 1 by software"]
+        pub fn d3cr(self) -> Reg<regs::D3cr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(24usize)) }
+        }
+        #[doc = "reset only by system reset, not reset by wakeup from Standby mode5 wait states are required when writing this register (when clearing a WKUPF bit in PWR_WKUPFR, the AHB write access will complete after the WKUPF has been cleared)."]
+        pub fn wkupcr(self) -> Reg<regs::Wkupcr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(32usize)) }
+        }
+        #[doc = "reset only by system reset, not reset by wakeup from Standby mode"]
+        pub fn wkupfr(self) -> Reg<regs::Wkupfr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(36usize)) }
+        }
+        #[doc = "Reset only by system reset, not reset by wakeup from Standby mode"]
+        pub fn wkupepr(self) -> Reg<regs::Wkupepr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(40usize)) }
+        }
+    }
+    pub mod regs {
+        use crate::generic::*;
+        #[doc = "Reset only by system reset, not reset by wakeup from Standby mode"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Wkupepr(pub u32);
+        impl Wkupepr {
+            #[doc = "Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge."]
+            pub fn wkupen(&self, n: usize) -> bool {
+                assert!(n < 6usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Enable Wakeup Pin WKUPn+1 Each bit is set and cleared by software. Note: An additional wakeup event is detected if WKUPn+1 pin is enabled (by setting the WKUPENn+1 bit) when WKUPn+1 pin level is already high when WKUPPn+1 selects rising edge, or low when WKUPPn+1 selects falling edge."]
+            pub fn set_wkupen(&mut self, n: usize, val: bool) {
+                assert!(n < 6usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin."]
+            pub fn wkupp(&self, n: usize) -> bool {
+                assert!(n < 6usize);
+                let offs = 8usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Wakeup pin polarity bit for WKUPn-7 These bits define the polarity used for event detection on WKUPn-7 external wakeup pin."]
+            pub fn set_wkupp(&mut self, n: usize, val: bool) {
+                assert!(n < 6usize);
+                let offs = 8usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+            #[doc = "Wakeup pin pull configuration"]
+            pub fn wkuppupd(&self, n: usize) -> u8 {
+                assert!(n < 6usize);
+                let offs = 16usize + n * 2usize;
+                let val = (self.0 >> offs) & 0x03;
+                val as u8
+            }
+            #[doc = "Wakeup pin pull configuration"]
+            pub fn set_wkuppupd(&mut self, n: usize, val: u8) {
+                assert!(n < 6usize);
+                let offs = 16usize + n * 2usize;
+                self.0 = (self.0 & !(0x03 << offs)) | (((val as u32) & 0x03) << offs);
+            }
+        }
+        impl Default for Wkupepr {
+            fn default() -> Wkupepr {
+                Wkupepr(0)
+            }
+        }
+        #[doc = "reset only by system reset, not reset by wakeup from Standby mode5 wait states are required when writing this register (when clearing a WKUPF bit in PWR_WKUPFR, the AHB write access will complete after the WKUPF has been cleared)."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Wkupcr(pub u32);
+        impl Wkupcr {
+            #[doc = "Clear Wakeup pin flag for WKUP. These bits are always read as 0."]
+            pub const fn wkupc(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0x3f;
+                val as u8
+            }
+            #[doc = "Clear Wakeup pin flag for WKUP. These bits are always read as 0."]
+            pub fn set_wkupc(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x3f << 0usize)) | (((val as u32) & 0x3f) << 0usize);
+            }
+        }
+        impl Default for Wkupcr {
+            fn default() -> Wkupcr {
+                Wkupcr(0)
+            }
+        }
+        #[doc = "PWR control status register 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Csr1(pub u32);
+        impl Csr1 {
+            #[doc = "Programmable voltage detect output This bit is set and cleared by hardware. It is valid only if the PVD has been enabled by the PVDE bit. Note: since the PVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the PVDE bit is set."]
+            pub const fn pvdo(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Programmable voltage detect output This bit is set and cleared by hardware. It is valid only if the PVD has been enabled by the PVDE bit. Note: since the PVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the PVDE bit is set."]
+            pub fn set_pvdo(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Voltage levels ready bit for currently used VOS and SDLEVEL This bit is set to 1 by hardware when the voltage regulator and the SD converter are both disabled and Bypass mode is selected in PWR control register 3 (PWR_CR3)."]
+            pub const fn actvosrdy(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Voltage levels ready bit for currently used VOS and SDLEVEL This bit is set to 1 by hardware when the voltage regulator and the SD converter are both disabled and Bypass mode is selected in PWR control register 3 (PWR_CR3)."]
+            pub fn set_actvosrdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+            #[doc = "VOS currently applied for VCORE voltage scaling selection. These bits reflect the last VOS value applied to the PMU."]
+            pub const fn actvos(&self) -> u8 {
+                let val = (self.0 >> 14usize) & 0x03;
+                val as u8
+            }
+            #[doc = "VOS currently applied for VCORE voltage scaling selection. These bits reflect the last VOS value applied to the PMU."]
+            pub fn set_actvos(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 14usize)) | (((val as u32) & 0x03) << 14usize);
+            }
+            #[doc = "Analog voltage detector output on VDDA This bit is set and cleared by hardware. It is valid only if AVD on VDDA is enabled by the AVDEN bit. Note: Since the AVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the AVDEN bit is set."]
+            pub const fn avdo(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Analog voltage detector output on VDDA This bit is set and cleared by hardware. It is valid only if AVD on VDDA is enabled by the AVDEN bit. Note: Since the AVD is disabled in Standby mode, this bit is equal to 0 after Standby or reset until the AVDEN bit is set."]
+            pub fn set_avdo(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
+            }
+        }
+        impl Default for Csr1 {
+            fn default() -> Csr1 {
+                Csr1(0)
+            }
+        }
+        #[doc = "This register is not reset by wakeup from Standby mode, RESET signal and VDD POR. It is only reset by VSW POR and VSWRST reset. This register shall not be accessed when VSWRST bit in RCC_BDCR register resets the VSW domain.After reset, PWR_CR2 register is write-protected. Prior to modifying its content, the DBP bit in PWR_CR1 register must be set to disable the write protection."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr2(pub u32);
+        impl Cr2 {
+            #[doc = "Backup regulator enable When set, the Backup regulator (used to maintain the backup RAM content in Standby and VBAT modes) is enabled. If BREN is reset, the backup regulator is switched off. The backup RAM can still be used in Run and Stop modes. However, its content will be lost in Standby and VBAT modes. If BREN is set, the application must wait till the Backup Regulator Ready flag (BRRDY) is set to indicate that the data written into the SRAM will be maintained in Standby and VBAT modes."]
+            pub const fn bren(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Backup regulator enable When set, the Backup regulator (used to maintain the backup RAM content in Standby and VBAT modes) is enabled. If BREN is reset, the backup regulator is switched off. The backup RAM can still be used in Run and Stop modes. However, its content will be lost in Standby and VBAT modes. If BREN is set, the application must wait till the Backup Regulator Ready flag (BRRDY) is set to indicate that the data written into the SRAM will be maintained in Standby and VBAT modes."]
+            pub fn set_bren(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "VBAT and temperature monitoring enable When set, the VBAT supply and temperature monitoring is enabled."]
+            pub const fn monen(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "VBAT and temperature monitoring enable When set, the VBAT supply and temperature monitoring is enabled."]
+            pub fn set_monen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Backup regulator ready This bit is set by hardware to indicate that the Backup regulator is ready."]
+            pub const fn brrdy(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Backup regulator ready This bit is set by hardware to indicate that the Backup regulator is ready."]
+            pub fn set_brrdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
+            }
+            #[doc = "VBAT level monitoring versus low threshold"]
+            pub const fn vbatl(&self) -> bool {
+                let val = (self.0 >> 20usize) & 0x01;
+                val != 0
+            }
+            #[doc = "VBAT level monitoring versus low threshold"]
+            pub fn set_vbatl(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
+            }
+            #[doc = "VBAT level monitoring versus high threshold"]
+            pub const fn vbath(&self) -> bool {
+                let val = (self.0 >> 21usize) & 0x01;
+                val != 0
+            }
+            #[doc = "VBAT level monitoring versus high threshold"]
+            pub fn set_vbath(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
+            }
+            #[doc = "Temperature level monitoring versus low threshold"]
+            pub const fn templ(&self) -> bool {
+                let val = (self.0 >> 22usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Temperature level monitoring versus low threshold"]
+            pub fn set_templ(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
+            }
+            #[doc = "Temperature level monitoring versus high threshold"]
+            pub const fn temph(&self) -> bool {
+                let val = (self.0 >> 23usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Temperature level monitoring versus high threshold"]
+            pub fn set_temph(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
+            }
+        }
+        impl Default for Cr2 {
+            fn default() -> Cr2 {
+                Cr2(0)
+            }
+        }
+        #[doc = "reset only by system reset, not reset by wakeup from Standby mode"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Wkupfr(pub u32);
+        impl Wkupfr {
+            #[doc = "Wakeup pin WKUPF flag. This bit is set by hardware and cleared only by a Reset pin or by setting the WKUPCn+1 bit in the PWR wakeup clear register (PWR_WKUPCR)."]
+            pub fn wkupf(&self, n: usize) -> bool {
+                assert!(n < 6usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Wakeup pin WKUPF flag. This bit is set by hardware and cleared only by a Reset pin or by setting the WKUPCn+1 bit in the PWR wakeup clear register (PWR_WKUPCR)."]
+            pub fn set_wkupf(&mut self, n: usize, val: bool) {
+                assert!(n < 6usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Wkupfr {
+            fn default() -> Wkupfr {
+                Wkupfr(0)
+            }
+        }
+        #[doc = "PWR control register 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr1(pub u32);
+        impl Cr1 {
+            #[doc = "Low-power Deepsleep with SVOS3 (SVOS4 and SVOS5 always use low-power, regardless of the setting of this bit)"]
+            pub const fn lpds(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Low-power Deepsleep with SVOS3 (SVOS4 and SVOS5 always use low-power, regardless of the setting of this bit)"]
+            pub fn set_lpds(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Programmable voltage detector enable"]
+            pub const fn pvde(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Programmable voltage detector enable"]
+            pub fn set_pvde(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Programmable voltage detector level selection These bits select the voltage threshold detected by the PVD. Note: Refer to Section Electrical characteristics of the product datasheet for more details."]
+            pub const fn pls(&self) -> u8 {
+                let val = (self.0 >> 5usize) & 0x07;
+                val as u8
+            }
+            #[doc = "Programmable voltage detector level selection These bits select the voltage threshold detected by the PVD. Note: Refer to Section Electrical characteristics of the product datasheet for more details."]
+            pub fn set_pls(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x07 << 5usize)) | (((val as u32) & 0x07) << 5usize);
+            }
+            #[doc = "Disable backup domain write protection In reset state, the RCC_BDCR register, the RTC registers (including the backup registers), BREN and MOEN bits in PWR_CR2 register, are protected against parasitic write access. This bit must be set to enable write access to these registers."]
+            pub const fn dbp(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Disable backup domain write protection In reset state, the RCC_BDCR register, the RTC registers (including the backup registers), BREN and MOEN bits in PWR_CR2 register, are protected against parasitic write access. This bit must be set to enable write access to these registers."]
+            pub fn set_dbp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Flash low-power mode in DStop mode This bit allows to obtain the best trade-off between low-power consumption and restart time when exiting from DStop mode. When it is set, the Flash memory enters low-power mode when D1 domain is in DStop mode."]
+            pub const fn flps(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Flash low-power mode in DStop mode This bit allows to obtain the best trade-off between low-power consumption and restart time when exiting from DStop mode. When it is set, the Flash memory enters low-power mode when D1 domain is in DStop mode."]
+            pub fn set_flps(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "System Stop mode voltage scaling selection These bits control the VCORE voltage level in system Stop mode, to obtain the best trade-off between power consumption and performance."]
+            pub const fn svos(&self) -> u8 {
+                let val = (self.0 >> 14usize) & 0x03;
+                val as u8
+            }
+            #[doc = "System Stop mode voltage scaling selection These bits control the VCORE voltage level in system Stop mode, to obtain the best trade-off between power consumption and performance."]
+            pub fn set_svos(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 14usize)) | (((val as u32) & 0x03) << 14usize);
+            }
+            #[doc = "Peripheral voltage monitor on VDDA enable"]
+            pub const fn avden(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Peripheral voltage monitor on VDDA enable"]
+            pub fn set_avden(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
+            }
+            #[doc = "Analog voltage detector level selection These bits select the voltage threshold detected by the AVD."]
+            pub const fn als(&self) -> u8 {
+                let val = (self.0 >> 17usize) & 0x03;
+                val as u8
+            }
+            #[doc = "Analog voltage detector level selection These bits select the voltage threshold detected by the AVD."]
+            pub fn set_als(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 17usize)) | (((val as u32) & 0x03) << 17usize);
+            }
+        }
+        impl Default for Cr1 {
+            fn default() -> Cr1 {
+                Cr1(0)
+            }
+        }
+        #[doc = "This register allows controlling CPU1 power."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cpucr(pub u32);
+        impl Cpucr {
+            #[doc = "D1 domain Power Down Deepsleep selection. This bit allows CPU1 to define the Deepsleep mode for D1 domain."]
+            pub const fn pdds_d1(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "D1 domain Power Down Deepsleep selection. This bit allows CPU1 to define the Deepsleep mode for D1 domain."]
+            pub fn set_pdds_d1(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "D2 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for D2 domain."]
+            pub const fn pdds_d2(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "D2 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for D2 domain."]
+            pub fn set_pdds_d2(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "System D3 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for System D3 domain."]
+            pub const fn pdds_d3(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "System D3 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for System D3 domain."]
+            pub fn set_pdds_d3(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "STOP flag This bit is set by hardware and cleared only by any reset or by setting the CPU1 CSSF bit."]
+            pub const fn stopf(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "STOP flag This bit is set by hardware and cleared only by any reset or by setting the CPU1 CSSF bit."]
+            pub fn set_stopf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "System Standby flag This bit is set by hardware and cleared only by a POR (Power-on Reset) or by setting the CPU1 CSSF bit"]
+            pub const fn sbf(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "System Standby flag This bit is set by hardware and cleared only by a POR (Power-on Reset) or by setting the CPU1 CSSF bit"]
+            pub fn set_sbf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "D1 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D1 domain is no longer in DStandby mode."]
+            pub const fn sbf_d1(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "D1 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D1 domain is no longer in DStandby mode."]
+            pub fn set_sbf_d1(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "D2 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D2 domain is no longer in DStandby mode."]
+            pub const fn sbf_d2(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "D2 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D2 domain is no longer in DStandby mode."]
+            pub fn set_sbf_d2(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Clear D1 domain CPU1 Standby, Stop and HOLD flags (always read as 0) This bit is cleared to 0 by hardware."]
+            pub const fn cssf(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Clear D1 domain CPU1 Standby, Stop and HOLD flags (always read as 0) This bit is cleared to 0 by hardware."]
+            pub fn set_cssf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "Keep system D3 domain in Run mode regardless of the CPU sub-systems modes"]
+            pub const fn run_d3(&self) -> bool {
+                let val = (self.0 >> 11usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Keep system D3 domain in Run mode regardless of the CPU sub-systems modes"]
+            pub fn set_run_d3(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
+            }
+        }
+        impl Default for Cpucr {
+            fn default() -> Cpucr {
+                Cpucr(0)
+            }
+        }
+        #[doc = "Reset only by POR only, not reset by wakeup from Standby mode and RESET pad. The lower byte of this register is written once after POR and shall be written before changing VOS level or ck_sys clock frequency. No limitation applies to the upper bytes.Programming data corresponding to an invalid combination of SDLEVEL, SDEXTHP, SDEN, LDOEN and BYPASS bits (see Table9) will be ignored: data will not be written, the written-once mechanism will lock the register and any further write access will be ignored. The default supply configuration will be kept and the ACTVOSRDY bit in PWR control status register 1 (PWR_CSR1) will go on indicating invalid voltage levels. The system shall be power cycled before writing a new value."]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr3(pub u32);
+        impl Cr3 {
+            #[doc = "Power management unit bypass"]
+            pub const fn bypass(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Power management unit bypass"]
+            pub fn set_bypass(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Low drop-out regulator enable"]
+            pub const fn ldoen(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Low drop-out regulator enable"]
+            pub fn set_ldoen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "SD converter Enable"]
+            pub const fn scuen(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "SD converter Enable"]
+            pub fn set_scuen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "VBAT charging enable"]
+            pub const fn vbe(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "VBAT charging enable"]
+            pub fn set_vbe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "VBAT charging resistor selection"]
+            pub const fn vbrs(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "VBAT charging resistor selection"]
+            pub fn set_vbrs(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "VDD33USB voltage level detector enable."]
+            pub const fn usb33den(&self) -> bool {
+                let val = (self.0 >> 24usize) & 0x01;
+                val != 0
+            }
+            #[doc = "VDD33USB voltage level detector enable."]
+            pub fn set_usb33den(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 24usize)) | (((val as u32) & 0x01) << 24usize);
+            }
+            #[doc = "USB regulator enable."]
+            pub const fn usbregen(&self) -> bool {
+                let val = (self.0 >> 25usize) & 0x01;
+                val != 0
+            }
+            #[doc = "USB regulator enable."]
+            pub fn set_usbregen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 25usize)) | (((val as u32) & 0x01) << 25usize);
+            }
+            #[doc = "USB supply ready."]
+            pub const fn usb33rdy(&self) -> bool {
+                let val = (self.0 >> 26usize) & 0x01;
+                val != 0
+            }
+            #[doc = "USB supply ready."]
+            pub fn set_usb33rdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
+            }
+        }
+        impl Default for Cr3 {
+            fn default() -> Cr3 {
+                Cr3(0)
+            }
+        }
+        #[doc = "This register allows controlling D3 domain power.Following reset VOSRDY will be read 1 by software"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct D3cr(pub u32);
+        impl D3cr {
+            #[doc = "VOS Ready bit for VCORE voltage scaling output selection. This bit is set to 1 by hardware when Bypass mode is selected in PWR control register 3 (PWR_CR3)."]
+            pub const fn vosrdy(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "VOS Ready bit for VCORE voltage scaling output selection. This bit is set to 1 by hardware when Bypass mode is selected in PWR control register 3 (PWR_CR3)."]
+            pub fn set_vosrdy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+            #[doc = "Voltage scaling selection according to performance These bits control the VCORE voltage level and allow to obtains the best trade-off between power consumption and performance: When increasing the performance, the voltage scaling shall be changed before increasing the system frequency. When decreasing performance, the system frequency shall first be decreased before changing the voltage scaling."]
+            pub const fn vos(&self) -> u8 {
+                let val = (self.0 >> 14usize) & 0x03;
+                val as u8
+            }
+            #[doc = "Voltage scaling selection according to performance These bits control the VCORE voltage level and allow to obtains the best trade-off between power consumption and performance: When increasing the performance, the voltage scaling shall be changed before increasing the system frequency. When decreasing performance, the system frequency shall first be decreased before changing the voltage scaling."]
+            pub fn set_vos(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x03 << 14usize)) | (((val as u32) & 0x03) << 14usize);
+            }
+        }
+        impl Default for D3cr {
+            fn default() -> D3cr {
+                D3cr(0)
+            }
+        }
+    }
+}
 pub mod spi_v3 {
     use crate::generic::*;
     #[doc = "Serial peripheral interface"]
@@ -25123,6 +23650,107 @@ pub mod spi_v3 {
     }
     pub mod regs {
         use crate::generic::*;
+        #[doc = "control register 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr1(pub u32);
+        impl Cr1 {
+            #[doc = "Serial Peripheral Enable"]
+            pub const fn spe(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Serial Peripheral Enable"]
+            pub fn set_spe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Master automatic SUSP in Receive mode"]
+            pub const fn masrx(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Master automatic SUSP in Receive mode"]
+            pub fn set_masrx(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Master transfer start"]
+            pub const fn cstart(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Master transfer start"]
+            pub fn set_cstart(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "Master SUSPend request"]
+            pub const fn csusp(&self) -> bool {
+                let val = (self.0 >> 10usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Master SUSPend request"]
+            pub fn set_csusp(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            }
+            #[doc = "Rx/Tx direction at Half-duplex mode"]
+            pub const fn hddir(&self) -> super::vals::Hddir {
+                let val = (self.0 >> 11usize) & 0x01;
+                super::vals::Hddir(val as u8)
+            }
+            #[doc = "Rx/Tx direction at Half-duplex mode"]
+            pub fn set_hddir(&mut self, val: super::vals::Hddir) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
+            }
+            #[doc = "Internal SS signal input level"]
+            pub const fn ssi(&self) -> bool {
+                let val = (self.0 >> 12usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Internal SS signal input level"]
+            pub fn set_ssi(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
+            }
+            #[doc = "32-bit CRC polynomial configuration"]
+            pub const fn crc33_17(&self) -> super::vals::Crc {
+                let val = (self.0 >> 13usize) & 0x01;
+                super::vals::Crc(val as u8)
+            }
+            #[doc = "32-bit CRC polynomial configuration"]
+            pub fn set_crc33_17(&mut self, val: super::vals::Crc) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize);
+            }
+            #[doc = "CRC calculation initialization pattern control for receiver"]
+            pub const fn rcrcini(&self) -> super::vals::Rcrcini {
+                let val = (self.0 >> 14usize) & 0x01;
+                super::vals::Rcrcini(val as u8)
+            }
+            #[doc = "CRC calculation initialization pattern control for receiver"]
+            pub fn set_rcrcini(&mut self, val: super::vals::Rcrcini) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
+            }
+            #[doc = "CRC calculation initialization pattern control for transmitter"]
+            pub const fn tcrcini(&self) -> super::vals::Tcrcini {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Tcrcini(val as u8)
+            }
+            #[doc = "CRC calculation initialization pattern control for transmitter"]
+            pub fn set_tcrcini(&mut self, val: super::vals::Tcrcini) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "Locking the AF configuration of associated IOs"]
+            pub const fn iolock(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Locking the AF configuration of associated IOs"]
+            pub fn set_iolock(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
+            }
+        }
+        impl Default for Cr1 {
+            fn default() -> Cr1 {
+                Cr1(0)
+            }
+        }
         #[doc = "configuration register 1"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -25215,6 +23843,27 @@ pub mod spi_v3 {
                 Cfg1(0)
             }
         }
+        #[doc = "Transmit Data Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Txdr(pub u32);
+        impl Txdr {
+            #[doc = "Transmit data register"]
+            pub const fn txdr(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
+            }
+            #[doc = "Transmit data register"]
+            pub fn set_txdr(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            }
+        }
+        impl Default for Txdr {
+            fn default() -> Txdr {
+                Txdr(0)
+            }
+        }
         #[doc = "configuration register 2"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -25352,46 +24001,25 @@ pub mod spi_v3 {
                 Cfg2(0)
             }
         }
-        #[doc = "Underrun Data Register"]
+        #[doc = "Polynomial Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Udrdr(pub u32);
-        impl Udrdr {
-            #[doc = "Data at slave underrun condition"]
-            pub const fn udrdr(&self) -> u32 {
+        pub struct Crcpoly(pub u32);
+        impl Crcpoly {
+            #[doc = "CRC polynomial register"]
+            pub const fn crcpoly(&self) -> u32 {
                 let val = (self.0 >> 0usize) & 0xffff_ffff;
                 val as u32
             }
-            #[doc = "Data at slave underrun condition"]
-            pub fn set_udrdr(&mut self, val: u32) {
+            #[doc = "CRC polynomial register"]
+            pub fn set_crcpoly(&mut self, val: u32) {
                 self.0 =
                     (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
             }
         }
-        impl Default for Udrdr {
-            fn default() -> Udrdr {
-                Udrdr(0)
-            }
-        }
-        #[doc = "Transmit Data Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Txdr(pub u32);
-        impl Txdr {
-            #[doc = "Transmit data register"]
-            pub const fn txdr(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "Transmit data register"]
-            pub fn set_txdr(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Txdr {
-            fn default() -> Txdr {
-                Txdr(0)
+        impl Default for Crcpoly {
+            fn default() -> Crcpoly {
+                Crcpoly(0)
             }
         }
         #[doc = "Receive Data Register"]
@@ -25415,25 +24043,25 @@ pub mod spi_v3 {
                 Rxdr(0)
             }
         }
-        #[doc = "Polynomial Register"]
+        #[doc = "Receiver CRC Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Crcpoly(pub u32);
-        impl Crcpoly {
-            #[doc = "CRC polynomial register"]
-            pub const fn crcpoly(&self) -> u32 {
+        pub struct Rxcrc(pub u32);
+        impl Rxcrc {
+            #[doc = "CRC register for receiver"]
+            pub const fn rxcrc(&self) -> u32 {
                 let val = (self.0 >> 0usize) & 0xffff_ffff;
                 val as u32
             }
-            #[doc = "CRC polynomial register"]
-            pub fn set_crcpoly(&mut self, val: u32) {
+            #[doc = "CRC register for receiver"]
+            pub fn set_rxcrc(&mut self, val: u32) {
                 self.0 =
                     (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
             }
         }
-        impl Default for Crcpoly {
-            fn default() -> Crcpoly {
-                Crcpoly(0)
+        impl Default for Rxcrc {
+            fn default() -> Rxcrc {
+                Rxcrc(0)
             }
         }
         #[doc = "Interrupt/Status Flags Clear Register"]
@@ -25528,6 +24156,77 @@ pub mod spi_v3 {
                 Ifcr(0)
             }
         }
+        #[doc = "Transmitter CRC Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Txcrc(pub u32);
+        impl Txcrc {
+            #[doc = "CRC register for transmitter"]
+            pub const fn txcrc(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
+            }
+            #[doc = "CRC register for transmitter"]
+            pub fn set_txcrc(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            }
+        }
+        impl Default for Txcrc {
+            fn default() -> Txcrc {
+                Txcrc(0)
+            }
+        }
+        #[doc = "Underrun Data Register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Udrdr(pub u32);
+        impl Udrdr {
+            #[doc = "Data at slave underrun condition"]
+            pub const fn udrdr(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0xffff_ffff;
+                val as u32
+            }
+            #[doc = "Data at slave underrun condition"]
+            pub fn set_udrdr(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
+            }
+        }
+        impl Default for Udrdr {
+            fn default() -> Udrdr {
+                Udrdr(0)
+            }
+        }
+        #[doc = "control register 2"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr2(pub u32);
+        impl Cr2 {
+            #[doc = "Number of data at current transfer"]
+            pub const fn tsize(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "Number of data at current transfer"]
+            pub fn set_tsize(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+            #[doc = "Number of data transfer extension to be reload into TSIZE just when a previous"]
+            pub const fn tser(&self) -> u16 {
+                let val = (self.0 >> 16usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "Number of data transfer extension to be reload into TSIZE just when a previous"]
+            pub fn set_tser(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize);
+            }
+        }
+        impl Default for Cr2 {
+            fn default() -> Cr2 {
+                Cr2(0)
+            }
+        }
         #[doc = "Interrupt Enable Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -25638,157 +24337,6 @@ pub mod spi_v3 {
                 Ier(0)
             }
         }
-        #[doc = "control register 2"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr2(pub u32);
-        impl Cr2 {
-            #[doc = "Number of data at current transfer"]
-            pub const fn tsize(&self) -> u16 {
-                let val = (self.0 >> 0usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "Number of data at current transfer"]
-            pub fn set_tsize(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
-            }
-            #[doc = "Number of data transfer extension to be reload into TSIZE just when a previous"]
-            pub const fn tser(&self) -> u16 {
-                let val = (self.0 >> 16usize) & 0xffff;
-                val as u16
-            }
-            #[doc = "Number of data transfer extension to be reload into TSIZE just when a previous"]
-            pub fn set_tser(&mut self, val: u16) {
-                self.0 = (self.0 & !(0xffff << 16usize)) | (((val as u32) & 0xffff) << 16usize);
-            }
-        }
-        impl Default for Cr2 {
-            fn default() -> Cr2 {
-                Cr2(0)
-            }
-        }
-        #[doc = "Receiver CRC Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Rxcrc(pub u32);
-        impl Rxcrc {
-            #[doc = "CRC register for receiver"]
-            pub const fn rxcrc(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "CRC register for receiver"]
-            pub fn set_rxcrc(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Rxcrc {
-            fn default() -> Rxcrc {
-                Rxcrc(0)
-            }
-        }
-        #[doc = "control register 1"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Cr1(pub u32);
-        impl Cr1 {
-            #[doc = "Serial Peripheral Enable"]
-            pub const fn spe(&self) -> bool {
-                let val = (self.0 >> 0usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Serial Peripheral Enable"]
-            pub fn set_spe(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
-            }
-            #[doc = "Master automatic SUSP in Receive mode"]
-            pub const fn masrx(&self) -> bool {
-                let val = (self.0 >> 8usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Master automatic SUSP in Receive mode"]
-            pub fn set_masrx(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
-            }
-            #[doc = "Master transfer start"]
-            pub const fn cstart(&self) -> bool {
-                let val = (self.0 >> 9usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Master transfer start"]
-            pub fn set_cstart(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
-            }
-            #[doc = "Master SUSPend request"]
-            pub const fn csusp(&self) -> bool {
-                let val = (self.0 >> 10usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Master SUSPend request"]
-            pub fn set_csusp(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
-            }
-            #[doc = "Rx/Tx direction at Half-duplex mode"]
-            pub const fn hddir(&self) -> super::vals::Hddir {
-                let val = (self.0 >> 11usize) & 0x01;
-                super::vals::Hddir(val as u8)
-            }
-            #[doc = "Rx/Tx direction at Half-duplex mode"]
-            pub fn set_hddir(&mut self, val: super::vals::Hddir) {
-                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
-            }
-            #[doc = "Internal SS signal input level"]
-            pub const fn ssi(&self) -> bool {
-                let val = (self.0 >> 12usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Internal SS signal input level"]
-            pub fn set_ssi(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
-            }
-            #[doc = "32-bit CRC polynomial configuration"]
-            pub const fn crc33_17(&self) -> super::vals::Crc {
-                let val = (self.0 >> 13usize) & 0x01;
-                super::vals::Crc(val as u8)
-            }
-            #[doc = "32-bit CRC polynomial configuration"]
-            pub fn set_crc33_17(&mut self, val: super::vals::Crc) {
-                self.0 = (self.0 & !(0x01 << 13usize)) | (((val.0 as u32) & 0x01) << 13usize);
-            }
-            #[doc = "CRC calculation initialization pattern control for receiver"]
-            pub const fn rcrcini(&self) -> super::vals::Rcrcini {
-                let val = (self.0 >> 14usize) & 0x01;
-                super::vals::Rcrcini(val as u8)
-            }
-            #[doc = "CRC calculation initialization pattern control for receiver"]
-            pub fn set_rcrcini(&mut self, val: super::vals::Rcrcini) {
-                self.0 = (self.0 & !(0x01 << 14usize)) | (((val.0 as u32) & 0x01) << 14usize);
-            }
-            #[doc = "CRC calculation initialization pattern control for transmitter"]
-            pub const fn tcrcini(&self) -> super::vals::Tcrcini {
-                let val = (self.0 >> 15usize) & 0x01;
-                super::vals::Tcrcini(val as u8)
-            }
-            #[doc = "CRC calculation initialization pattern control for transmitter"]
-            pub fn set_tcrcini(&mut self, val: super::vals::Tcrcini) {
-                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
-            }
-            #[doc = "Locking the AF configuration of associated IOs"]
-            pub const fn iolock(&self) -> bool {
-                let val = (self.0 >> 16usize) & 0x01;
-                val != 0
-            }
-            #[doc = "Locking the AF configuration of associated IOs"]
-            pub fn set_iolock(&mut self, val: bool) {
-                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
-            }
-        }
-        impl Default for Cr1 {
-            fn default() -> Cr1 {
-                Cr1(0)
-            }
-        }
         #[doc = "Status Register"]
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq)]
@@ -25944,32 +24492,136 @@ pub mod spi_v3 {
                 Sr(0)
             }
         }
-        #[doc = "Transmitter CRC Register"]
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq)]
-        pub struct Txcrc(pub u32);
-        impl Txcrc {
-            #[doc = "CRC register for transmitter"]
-            pub const fn txcrc(&self) -> u32 {
-                let val = (self.0 >> 0usize) & 0xffff_ffff;
-                val as u32
-            }
-            #[doc = "CRC register for transmitter"]
-            pub fn set_txcrc(&mut self, val: u32) {
-                self.0 =
-                    (self.0 & !(0xffff_ffff << 0usize)) | (((val as u32) & 0xffff_ffff) << 0usize);
-            }
-        }
-        impl Default for Txcrc {
-            fn default() -> Txcrc {
-                Txcrc(0)
-            }
-        }
     }
     pub mod vals {
         use crate::generic::*;
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Udrdet(pub u8);
+        impl Udrdet {
+            #[doc = "Underrun is detected at begin of data frame"]
+            pub const STARTOFFRAME: Self = Self(0);
+            #[doc = "Underrun is detected at end of last data frame"]
+            pub const ENDOFFRAME: Self = Self(0x01);
+            #[doc = "Underrun is detected at begin of active SS signal"]
+            pub const STARTOFSLAVESELECT: Self = Self(0x02);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Sp(pub u8);
+        impl Sp {
+            #[doc = "Motorola SPI protocol"]
+            pub const MOTOROLA: Self = Self(0);
+            #[doc = "TI SPI protocol"]
+            pub const TI: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Datfmt(pub u8);
+        impl Datfmt {
+            #[doc = "The data inside RXDR and TXDR are right aligned"]
+            pub const RIGHTALIGNED: Self = Self(0);
+            #[doc = "The data inside RXDR and TXDR are left aligned"]
+            pub const LEFTALIGNED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ssom(pub u8);
+        impl Ssom {
+            #[doc = "SS is asserted until data transfer complete"]
+            pub const ASSERTED: Self = Self(0);
+            #[doc = "Data frames interleaved with SS not asserted during MIDI"]
+            pub const NOTASSERTED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Afcntr(pub u8);
+        impl Afcntr {
+            #[doc = "Peripheral takes no control of GPIOs while disabled"]
+            pub const NOTCONTROLLED: Self = Self(0);
+            #[doc = "Peripheral controls GPIOs while disabled"]
+            pub const CONTROLLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Rcrcini(pub u8);
+        impl Rcrcini {
+            #[doc = "All zeros RX CRC initialization pattern"]
+            pub const ALLZEROS: Self = Self(0);
+            #[doc = "All ones RX CRC initialization pattern"]
+            pub const ALLONES: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Crc(pub u8);
+        impl Crc {
+            #[doc = "Full size (33/17 bit) CRC polynomial is not used"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Full size (33/17 bit) CRC polynomial is used"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Udrcfg(pub u8);
+        impl Udrcfg {
+            #[doc = "Slave sends a constant underrun pattern"]
+            pub const CONSTANT: Self = Self(0);
+            #[doc = "Slave repeats last received data frame from master"]
+            pub const REPEATRECEIVED: Self = Self(0x01);
+            #[doc = "Slave repeats last transmitted data frame"]
+            pub const REPEATTRANSMITTED: Self = Self(0x02);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Rxwne(pub u8);
+        impl Rxwne {
+            #[doc = "Less than 32-bit data frame received"]
+            pub const LESSTHAN32: Self = Self(0);
+            #[doc = "At least 32-bit data frame received"]
+            pub const ATLEAST32: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ssiop(pub u8);
+        impl Ssiop {
+            #[doc = "Low level is active for SS signal"]
+            pub const ACTIVELOW: Self = Self(0);
+            #[doc = "High level is active for SS signal"]
+            pub const ACTIVEHIGH: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Comm(pub u8);
+        impl Comm {
+            #[doc = "Full duplex"]
+            pub const FULLDUPLEX: Self = Self(0);
+            #[doc = "Simplex transmitter only"]
+            pub const TRANSMITTER: Self = Self(0x01);
+            #[doc = "Simplex receiver only"]
+            pub const RECEIVER: Self = Self(0x02);
+            #[doc = "Half duplex"]
+            pub const HALFDUPLEX: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Tcrcini(pub u8);
+        impl Tcrcini {
+            #[doc = "All zeros TX CRC initialization pattern"]
+            pub const ALLZEROS: Self = Self(0);
+            #[doc = "All ones TX CRC initialization pattern"]
+            pub const ALLONES: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Lsbfrst(pub u8);
+        impl Lsbfrst {
+            #[doc = "Data is transmitted/received with the MSB first"]
+            pub const MSBFIRST: Self = Self(0);
+            #[doc = "Data is transmitted/received with the LSB first"]
+            pub const LSBFIRST: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
         pub struct Rxplvl(pub u8);
         impl Rxplvl {
             #[doc = "Zero frames beyond packing ratio available"]
@@ -25983,23 +24635,12 @@ pub mod spi_v3 {
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Udrcfg(pub u8);
-        impl Udrcfg {
-            #[doc = "Slave sends a constant underrun pattern"]
-            pub const CONSTANT: Self = Self(0);
-            #[doc = "Slave repeats last received data frame from master"]
-            pub const REPEATRECEIVED: Self = Self(0x01);
-            #[doc = "Slave repeats last transmitted data frame"]
-            pub const REPEATTRANSMITTED: Self = Self(0x02);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Hddir(pub u8);
-        impl Hddir {
-            #[doc = "Receiver in half duplex mode"]
-            pub const RECEIVER: Self = Self(0);
-            #[doc = "Transmitter in half duplex mode"]
-            pub const TRANSMITTER: Self = Self(0x01);
+        pub struct Cpol(pub u8);
+        impl Cpol {
+            #[doc = "CK to 0 when idle"]
+            pub const IDLELOW: Self = Self(0);
+            #[doc = "CK to 1 when idle"]
+            pub const IDLEHIGH: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
@@ -26024,32 +24665,14 @@ pub mod spi_v3 {
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ssom(pub u8);
-        impl Ssom {
-            #[doc = "SS is asserted until data transfer complete"]
-            pub const ASSERTED: Self = Self(0);
-            #[doc = "Data frames interleaved with SS not asserted during MIDI"]
-            pub const NOTASSERTED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Cpol(pub u8);
-        impl Cpol {
-            #[doc = "CK to 0 when idle"]
-            pub const IDLELOW: Self = Self(0);
-            #[doc = "CK to 1 when idle"]
-            pub const IDLEHIGH: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Udrdet(pub u8);
-        impl Udrdet {
-            #[doc = "Underrun is detected at begin of data frame"]
-            pub const STARTOFFRAME: Self = Self(0);
-            #[doc = "Underrun is detected at end of last data frame"]
-            pub const ENDOFFRAME: Self = Self(0x01);
-            #[doc = "Underrun is detected at begin of active SS signal"]
-            pub const STARTOFSLAVESELECT: Self = Self(0x02);
+        pub struct Datlen(pub u8);
+        impl Datlen {
+            #[doc = "16 bit data length"]
+            pub const BITS16: Self = Self(0);
+            #[doc = "24 bit data length"]
+            pub const BITS24: Self = Self(0x01);
+            #[doc = "32 bit data length"]
+            pub const BITS32: Self = Self(0x02);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
@@ -26090,50 +24713,12 @@ pub mod spi_v3 {
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Datfmt(pub u8);
-        impl Datfmt {
-            #[doc = "The data inside RXDR and TXDR are right aligned"]
-            pub const RIGHTALIGNED: Self = Self(0);
-            #[doc = "The data inside RXDR and TXDR are left aligned"]
-            pub const LEFTALIGNED: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Lsbfrst(pub u8);
-        impl Lsbfrst {
-            #[doc = "Data is transmitted/received with the MSB first"]
-            pub const MSBFIRST: Self = Self(0);
-            #[doc = "Data is transmitted/received with the LSB first"]
-            pub const LSBFIRST: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Rcrcini(pub u8);
-        impl Rcrcini {
-            #[doc = "All zeros RX CRC initialization pattern"]
-            pub const ALLZEROS: Self = Self(0);
-            #[doc = "All ones RX CRC initialization pattern"]
-            pub const ALLONES: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Sp(pub u8);
-        impl Sp {
-            #[doc = "Motorola SPI protocol"]
-            pub const MOTOROLA: Self = Self(0);
-            #[doc = "TI SPI protocol"]
-            pub const TI: Self = Self(0x01);
-        }
-        #[repr(transparent)]
-        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Datlen(pub u8);
-        impl Datlen {
-            #[doc = "16 bit data length"]
-            pub const BITS16: Self = Self(0);
-            #[doc = "24 bit data length"]
-            pub const BITS24: Self = Self(0x01);
-            #[doc = "32 bit data length"]
-            pub const BITS32: Self = Self(0x02);
+        pub struct Cpha(pub u8);
+        impl Cpha {
+            #[doc = "The first clock transition is the first data capture edge"]
+            pub const FIRSTEDGE: Self = Self(0);
+            #[doc = "The second clock transition is the first data capture edge"]
+            pub const SECONDEDGE: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
@@ -26146,70 +24731,1485 @@ pub mod spi_v3 {
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Comm(pub u8);
-        impl Comm {
-            #[doc = "Full duplex"]
-            pub const FULLDUPLEX: Self = Self(0);
-            #[doc = "Simplex transmitter only"]
+        pub struct Hddir(pub u8);
+        impl Hddir {
+            #[doc = "Receiver in half duplex mode"]
+            pub const RECEIVER: Self = Self(0);
+            #[doc = "Transmitter in half duplex mode"]
             pub const TRANSMITTER: Self = Self(0x01);
-            #[doc = "Simplex receiver only"]
-            pub const RECEIVER: Self = Self(0x02);
-            #[doc = "Half duplex"]
-            pub const HALFDUPLEX: Self = Self(0x03);
+        }
+    }
+}
+pub mod usart_v2 {
+    use crate::generic::*;
+    #[doc = "Universal synchronous asynchronous receiver transmitter"]
+    #[derive(Copy, Clone)]
+    pub struct Usart(pub *mut u8);
+    unsafe impl Send for Usart {}
+    unsafe impl Sync for Usart {}
+    impl Usart {
+        #[doc = "Control register 1"]
+        pub fn cr1(self) -> Reg<regs::Cr1, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "Control register 2"]
+        pub fn cr2(self) -> Reg<regs::Cr2, RW> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "Control register 3"]
+        pub fn cr3(self) -> Reg<regs::Cr3, RW> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        }
+        #[doc = "Baud rate register"]
+        pub fn brr(self) -> Reg<regs::Brr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(12usize)) }
+        }
+        #[doc = "Guard time and prescaler register"]
+        pub fn gtpr(self) -> Reg<regs::Gtpr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(16usize)) }
+        }
+        #[doc = "Receiver timeout register"]
+        pub fn rtor(self) -> Reg<regs::Rtor, RW> {
+            unsafe { Reg::from_ptr(self.0.add(20usize)) }
+        }
+        #[doc = "Request register"]
+        pub fn rqr(self) -> Reg<regs::Rqr, W> {
+            unsafe { Reg::from_ptr(self.0.add(24usize)) }
+        }
+        #[doc = "Interrupt & status register"]
+        pub fn isr(self) -> Reg<regs::Ixr, R> {
+            unsafe { Reg::from_ptr(self.0.add(28usize)) }
+        }
+        #[doc = "Interrupt flag clear register"]
+        pub fn icr(self) -> Reg<regs::Ixr, W> {
+            unsafe { Reg::from_ptr(self.0.add(32usize)) }
+        }
+        #[doc = "Receive data register"]
+        pub fn rdr(self) -> Reg<regs::Dr, R> {
+            unsafe { Reg::from_ptr(self.0.add(36usize)) }
+        }
+        #[doc = "Transmit data register"]
+        pub fn tdr(self) -> Reg<regs::Dr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(40usize)) }
+        }
+    }
+    pub mod vals {
+        use crate::generic::*;
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ovrdis(pub u8);
+        impl Ovrdis {
+            #[doc = "Overrun Error Flag, ORE, is set when received data is not read before receiving new data"]
+            pub const ENABLED: Self = Self(0);
+            #[doc = "Overrun functionality is disabled. If new data is received while the RXNE flag is still set the ORE flag is not set and the new received data overwrites the previous content of the RDR register"]
+            pub const DISABLED: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Ssiop(pub u8);
-        impl Ssiop {
-            #[doc = "Low level is active for SS signal"]
-            pub const ACTIVELOW: Self = Self(0);
-            #[doc = "High level is active for SS signal"]
-            pub const ACTIVEHIGH: Self = Self(0x01);
+        pub struct Sbkrq(pub u8);
+        impl Sbkrq {
+            #[doc = "sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available"]
+            pub const BREAK: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Rxwne(pub u8);
-        impl Rxwne {
-            #[doc = "Less than 32-bit data frame received"]
-            pub const LESSTHAN32: Self = Self(0);
-            #[doc = "At least 32-bit data frame received"]
-            pub const ATLEAST32: Self = Self(0x01);
+        pub struct Msbfirst(pub u8);
+        impl Msbfirst {
+            #[doc = "data is transmitted/received with data bit 0 first, following the start bit"]
+            pub const LSB: Self = Self(0);
+            #[doc = "data is transmitted/received with MSB (bit 7/8/9) first, following the start bit"]
+            pub const MSB: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Stop(pub u8);
+        impl Stop {
+            #[doc = "1 stop bit"]
+            pub const STOP1: Self = Self(0);
+            #[doc = "0.5 stop bit"]
+            pub const STOP0P5: Self = Self(0x01);
+            #[doc = "2 stop bit"]
+            pub const STOP2: Self = Self(0x02);
+            #[doc = "1.5 stop bit"]
+            pub const STOP1P5: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Abrrq(pub u8);
+        impl Abrrq {
+            #[doc = "resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame"]
+            pub const REQUEST: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Onebit(pub u8);
+        impl Onebit {
+            #[doc = "Three sample bit method"]
+            pub const SAMPLE3: Self = Self(0);
+            #[doc = "One sample bit method"]
+            pub const SAMPLE1: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
         pub struct Cpha(pub u8);
         impl Cpha {
             #[doc = "The first clock transition is the first data capture edge"]
-            pub const FIRSTEDGE: Self = Self(0);
+            pub const FIRST: Self = Self(0);
             #[doc = "The second clock transition is the first data capture edge"]
-            pub const SECONDEDGE: Self = Self(0x01);
+            pub const SECOND: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Crc(pub u8);
-        impl Crc {
-            #[doc = "Full size (33/17 bit) CRC polynomial is not used"]
-            pub const DISABLED: Self = Self(0);
-            #[doc = "Full size (33/17 bit) CRC polynomial is used"]
-            pub const ENABLED: Self = Self(0x01);
+        pub struct Lbcl(pub u8);
+        impl Lbcl {
+            #[doc = "The clock pulse of the last data bit is not output to the CK pin"]
+            pub const NOTOUTPUT: Self = Self(0);
+            #[doc = "The clock pulse of the last data bit is output to the CK pin"]
+            pub const OUTPUT: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Afcntr(pub u8);
-        impl Afcntr {
-            #[doc = "Peripheral takes no control of GPIOs while disabled"]
-            pub const NOTCONTROLLED: Self = Self(0);
-            #[doc = "Peripheral controls GPIOs while disabled"]
-            pub const CONTROLLED: Self = Self(0x01);
+        pub struct Lbdl(pub u8);
+        impl Lbdl {
+            #[doc = "10-bit break detection"]
+            pub const BIT10: Self = Self(0);
+            #[doc = "11-bit break detection"]
+            pub const BIT11: Self = Self(0x01);
         }
         #[repr(transparent)]
         #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
-        pub struct Tcrcini(pub u8);
-        impl Tcrcini {
-            #[doc = "All zeros TX CRC initialization pattern"]
-            pub const ALLZEROS: Self = Self(0);
-            #[doc = "All ones TX CRC initialization pattern"]
-            pub const ALLONES: Self = Self(0x01);
+        pub struct Rxinv(pub u8);
+        impl Rxinv {
+            #[doc = "RX pin signal works using the standard logic levels"]
+            pub const STANDARD: Self = Self(0);
+            #[doc = "RX pin signal values are inverted"]
+            pub const INVERTED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct M1(pub u8);
+        impl M1 {
+            #[doc = "Use M0 to set the data bits"]
+            pub const M0: Self = Self(0);
+            #[doc = "1 start bit, 7 data bits, n stop bits"]
+            pub const BIT7: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Swap(pub u8);
+        impl Swap {
+            #[doc = "TX/RX pins are used as defined in standard pinout"]
+            pub const STANDARD: Self = Self(0);
+            #[doc = "The TX and RX pins functions are swapped"]
+            pub const SWAPPED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ps(pub u8);
+        impl Ps {
+            #[doc = "Even parity"]
+            pub const EVEN: Self = Self(0);
+            #[doc = "Odd parity"]
+            pub const ODD: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Addm(pub u8);
+        impl Addm {
+            #[doc = "4-bit address detection"]
+            pub const BIT4: Self = Self(0);
+            #[doc = "7-bit address detection"]
+            pub const BIT7: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Over(pub u8);
+        impl Over {
+            #[doc = "Oversampling by 16"]
+            pub const OVERSAMPLING16: Self = Self(0);
+            #[doc = "Oversampling by 8"]
+            pub const OVERSAMPLING8: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Rxfrq(pub u8);
+        impl Rxfrq {
+            #[doc = "clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition"]
+            pub const DISCARD: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Txfrq(pub u8);
+        impl Txfrq {
+            #[doc = "Set the TXE flags. This allows to discard the transmit data"]
+            pub const DISCARD: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Hdsel(pub u8);
+        impl Hdsel {
+            #[doc = "Half duplex mode is not selected"]
+            pub const NOTSELECTED: Self = Self(0);
+            #[doc = "Half duplex mode is selected"]
+            pub const SELECTED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Abrmod(pub u8);
+        impl Abrmod {
+            #[doc = "Measurement of the start bit is used to detect the baud rate"]
+            pub const START: Self = Self(0);
+            #[doc = "Falling edge to falling edge measurement"]
+            pub const EDGE: Self = Self(0x01);
+            #[doc = "0x7F frame detection"]
+            pub const FRAME7F: Self = Self(0x02);
+            #[doc = "0x55 frame detection"]
+            pub const FRAME55: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Cpol(pub u8);
+        impl Cpol {
+            #[doc = "Steady low value on CK pin outside transmission window"]
+            pub const LOW: Self = Self(0);
+            #[doc = "Steady high value on CK pin outside transmission window"]
+            pub const HIGH: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct M0(pub u8);
+        impl M0 {
+            #[doc = "1 start bit, 8 data bits, n stop bits"]
+            pub const BIT8: Self = Self(0);
+            #[doc = "1 start bit, 9 data bits, n stop bits"]
+            pub const BIT9: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Wus(pub u8);
+        impl Wus {
+            #[doc = "WUF active on address match"]
+            pub const ADDRESS: Self = Self(0);
+            #[doc = "WuF active on Start bit detection"]
+            pub const START: Self = Self(0x02);
+            #[doc = "WUF active on RXNE"]
+            pub const RXNE: Self = Self(0x03);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Datainv(pub u8);
+        impl Datainv {
+            #[doc = "Logical data from the data register are send/received in positive/direct logic"]
+            pub const POSITIVE: Self = Self(0);
+            #[doc = "Logical data from the data register are send/received in negative/inverse logic"]
+            pub const NEGATIVE: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Ddre(pub u8);
+        impl Ddre {
+            #[doc = "DMA is not disabled in case of reception error"]
+            pub const NOTDISABLED: Self = Self(0);
+            #[doc = "DMA is disabled following a reception error"]
+            pub const DISABLED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Mmrq(pub u8);
+        impl Mmrq {
+            #[doc = "Puts the USART in mute mode and sets the RWU flag"]
+            pub const MUTE: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Irlp(pub u8);
+        impl Irlp {
+            #[doc = "Normal mode"]
+            pub const NORMAL: Self = Self(0);
+            #[doc = "Low-power mode"]
+            pub const LOWPOWER: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Wake(pub u8);
+        impl Wake {
+            #[doc = "Idle line"]
+            pub const IDLE: Self = Self(0);
+            #[doc = "Address mask"]
+            pub const ADDRESS: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Dep(pub u8);
+        impl Dep {
+            #[doc = "DE signal is active high"]
+            pub const HIGH: Self = Self(0);
+            #[doc = "DE signal is active low"]
+            pub const LOW: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Txinv(pub u8);
+        impl Txinv {
+            #[doc = "TX pin signal works using the standard logic levels"]
+            pub const STANDARD: Self = Self(0);
+            #[doc = "TX pin signal values are inverted"]
+            pub const INVERTED: Self = Self(0x01);
+        }
+    }
+    pub mod regs {
+        use crate::generic::*;
+        #[doc = "Request register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Rqr(pub u32);
+        impl Rqr {
+            #[doc = "Auto baud rate request"]
+            pub const fn abrrq(&self) -> super::vals::Abrrq {
+                let val = (self.0 >> 0usize) & 0x01;
+                super::vals::Abrrq(val as u8)
+            }
+            #[doc = "Auto baud rate request"]
+            pub fn set_abrrq(&mut self, val: super::vals::Abrrq) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val.0 as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Send break request"]
+            pub const fn sbkrq(&self) -> super::vals::Sbkrq {
+                let val = (self.0 >> 1usize) & 0x01;
+                super::vals::Sbkrq(val as u8)
+            }
+            #[doc = "Send break request"]
+            pub fn set_sbkrq(&mut self, val: super::vals::Sbkrq) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val.0 as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Mute mode request"]
+            pub const fn mmrq(&self) -> super::vals::Mmrq {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Mmrq(val as u8)
+            }
+            #[doc = "Mute mode request"]
+            pub fn set_mmrq(&mut self, val: super::vals::Mmrq) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Receive data flush request"]
+            pub const fn rxfrq(&self) -> super::vals::Rxfrq {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Rxfrq(val as u8)
+            }
+            #[doc = "Receive data flush request"]
+            pub fn set_rxfrq(&mut self, val: super::vals::Rxfrq) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Transmit data flush request"]
+            pub const fn txfrq(&self) -> super::vals::Txfrq {
+                let val = (self.0 >> 4usize) & 0x01;
+                super::vals::Txfrq(val as u8)
+            }
+            #[doc = "Transmit data flush request"]
+            pub fn set_txfrq(&mut self, val: super::vals::Txfrq) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val.0 as u32) & 0x01) << 4usize);
+            }
+        }
+        impl Default for Rqr {
+            fn default() -> Rqr {
+                Rqr(0)
+            }
+        }
+        #[doc = "Data register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Dr(pub u32);
+        impl Dr {
+            #[doc = "data value"]
+            pub const fn dr(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0x01ff;
+                val as u16
+            }
+            #[doc = "data value"]
+            pub fn set_dr(&mut self, val: u16) {
+                self.0 = (self.0 & !(0x01ff << 0usize)) | (((val as u32) & 0x01ff) << 0usize);
+            }
+        }
+        impl Default for Dr {
+            fn default() -> Dr {
+                Dr(0)
+            }
+        }
+        #[doc = "Control register 3"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr3(pub u32);
+        impl Cr3 {
+            #[doc = "Error interrupt enable"]
+            pub const fn eie(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Error interrupt enable"]
+            pub fn set_eie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "IrDA mode enable"]
+            pub const fn iren(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IrDA mode enable"]
+            pub fn set_iren(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "IrDA low-power"]
+            pub const fn irlp(&self) -> super::vals::Irlp {
+                let val = (self.0 >> 2usize) & 0x01;
+                super::vals::Irlp(val as u8)
+            }
+            #[doc = "IrDA low-power"]
+            pub fn set_irlp(&mut self, val: super::vals::Irlp) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val.0 as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Half-duplex selection"]
+            pub const fn hdsel(&self) -> super::vals::Hdsel {
+                let val = (self.0 >> 3usize) & 0x01;
+                super::vals::Hdsel(val as u8)
+            }
+            #[doc = "Half-duplex selection"]
+            pub fn set_hdsel(&mut self, val: super::vals::Hdsel) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val.0 as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Smartcard NACK enable"]
+            pub const fn nack(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Smartcard NACK enable"]
+            pub fn set_nack(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Smartcard mode enable"]
+            pub const fn scen(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Smartcard mode enable"]
+            pub fn set_scen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "DMA enable receiver"]
+            pub const fn dmar(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DMA enable receiver"]
+            pub fn set_dmar(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "DMA enable transmitter"]
+            pub const fn dmat(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DMA enable transmitter"]
+            pub fn set_dmat(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "RTS enable"]
+            pub const fn rtse(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "RTS enable"]
+            pub fn set_rtse(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "CTS enable"]
+            pub const fn ctse(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CTS enable"]
+            pub fn set_ctse(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "CTS interrupt enable"]
+            pub const fn ctsie(&self) -> bool {
+                let val = (self.0 >> 10usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CTS interrupt enable"]
+            pub fn set_ctsie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            }
+            #[doc = "One sample bit method enable"]
+            pub const fn onebit(&self) -> super::vals::Onebit {
+                let val = (self.0 >> 11usize) & 0x01;
+                super::vals::Onebit(val as u8)
+            }
+            #[doc = "One sample bit method enable"]
+            pub fn set_onebit(&mut self, val: super::vals::Onebit) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val.0 as u32) & 0x01) << 11usize);
+            }
+            #[doc = "Overrun Disable"]
+            pub const fn ovrdis(&self) -> super::vals::Ovrdis {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::Ovrdis(val as u8)
+            }
+            #[doc = "Overrun Disable"]
+            pub fn set_ovrdis(&mut self, val: super::vals::Ovrdis) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "DMA Disable on Reception Error"]
+            pub const fn ddre(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "DMA Disable on Reception Error"]
+            pub fn set_ddre(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+            #[doc = "Driver enable mode"]
+            pub const fn dem(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Driver enable mode"]
+            pub fn set_dem(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+            #[doc = "Driver enable polarity selection"]
+            pub const fn dep(&self) -> super::vals::Dep {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Dep(val as u8)
+            }
+            #[doc = "Driver enable polarity selection"]
+            pub fn set_dep(&mut self, val: super::vals::Dep) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "Smartcard auto-retry count"]
+            pub const fn scarcnt(&self) -> u8 {
+                let val = (self.0 >> 17usize) & 0x07;
+                val as u8
+            }
+            #[doc = "Smartcard auto-retry count"]
+            pub fn set_scarcnt(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x07 << 17usize)) | (((val as u32) & 0x07) << 17usize);
+            }
+            #[doc = "Wakeup from Stop mode interrupt flag selection"]
+            pub const fn wus(&self) -> super::vals::Wus {
+                let val = (self.0 >> 20usize) & 0x03;
+                super::vals::Wus(val as u8)
+            }
+            #[doc = "Wakeup from Stop mode interrupt flag selection"]
+            pub fn set_wus(&mut self, val: super::vals::Wus) {
+                self.0 = (self.0 & !(0x03 << 20usize)) | (((val.0 as u32) & 0x03) << 20usize);
+            }
+            #[doc = "Wakeup from Stop mode interrupt enable"]
+            pub const fn wufie(&self) -> bool {
+                let val = (self.0 >> 22usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Wakeup from Stop mode interrupt enable"]
+            pub fn set_wufie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
+            }
+        }
+        impl Default for Cr3 {
+            fn default() -> Cr3 {
+                Cr3(0)
+            }
+        }
+        #[doc = "Receiver timeout register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Rtor(pub u32);
+        impl Rtor {
+            #[doc = "Receiver timeout value"]
+            pub const fn rto(&self) -> u32 {
+                let val = (self.0 >> 0usize) & 0x00ff_ffff;
+                val as u32
+            }
+            #[doc = "Receiver timeout value"]
+            pub fn set_rto(&mut self, val: u32) {
+                self.0 =
+                    (self.0 & !(0x00ff_ffff << 0usize)) | (((val as u32) & 0x00ff_ffff) << 0usize);
+            }
+            #[doc = "Block Length"]
+            pub const fn blen(&self) -> u8 {
+                let val = (self.0 >> 24usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Block Length"]
+            pub fn set_blen(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 24usize)) | (((val as u32) & 0xff) << 24usize);
+            }
+        }
+        impl Default for Rtor {
+            fn default() -> Rtor {
+                Rtor(0)
+            }
+        }
+        #[doc = "Control register 1"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr1(pub u32);
+        impl Cr1 {
+            #[doc = "USART enable"]
+            pub const fn ue(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "USART enable"]
+            pub fn set_ue(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "USART enable in Stop mode"]
+            pub const fn uesm(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "USART enable in Stop mode"]
+            pub fn set_uesm(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Receiver enable"]
+            pub const fn re(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Receiver enable"]
+            pub fn set_re(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Transmitter enable"]
+            pub const fn te(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transmitter enable"]
+            pub fn set_te(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "IDLE interrupt enable"]
+            pub const fn idleie(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "IDLE interrupt enable"]
+            pub fn set_idleie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "RXNE interrupt enable"]
+            pub const fn rxneie(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "RXNE interrupt enable"]
+            pub fn set_rxneie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Transmission complete interrupt enable"]
+            pub const fn tcie(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transmission complete interrupt enable"]
+            pub fn set_tcie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "interrupt enable"]
+            pub const fn txeie(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "interrupt enable"]
+            pub fn set_txeie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "PE interrupt enable"]
+            pub const fn peie(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "PE interrupt enable"]
+            pub fn set_peie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Parity selection"]
+            pub const fn ps(&self) -> super::vals::Ps {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Ps(val as u8)
+            }
+            #[doc = "Parity selection"]
+            pub fn set_ps(&mut self, val: super::vals::Ps) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "Parity control enable"]
+            pub const fn pce(&self) -> bool {
+                let val = (self.0 >> 10usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Parity control enable"]
+            pub fn set_pce(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            }
+            #[doc = "Receiver wakeup method"]
+            pub const fn wake(&self) -> bool {
+                let val = (self.0 >> 11usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Receiver wakeup method"]
+            pub fn set_wake(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
+            }
+            #[doc = "Word length"]
+            pub const fn m0(&self) -> super::vals::M0 {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::M0(val as u8)
+            }
+            #[doc = "Word length"]
+            pub fn set_m0(&mut self, val: super::vals::M0) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "Word length"]
+            pub const fn m1(&self) -> super::vals::M1 {
+                let val = (self.0 >> 12usize) & 0x01;
+                super::vals::M1(val as u8)
+            }
+            #[doc = "Word length"]
+            pub fn set_m1(&mut self, val: super::vals::M1) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val.0 as u32) & 0x01) << 12usize);
+            }
+            #[doc = "Mute mode enable"]
+            pub const fn mme(&self) -> bool {
+                let val = (self.0 >> 13usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Mute mode enable"]
+            pub fn set_mme(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 13usize)) | (((val as u32) & 0x01) << 13usize);
+            }
+            #[doc = "Character match interrupt enable"]
+            pub const fn cmie(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Character match interrupt enable"]
+            pub fn set_cmie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+            #[doc = "Oversampling mode"]
+            pub fn over(&self, n: usize) -> super::vals::Over {
+                assert!(n < 1usize);
+                let offs = 15usize + n * 0usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Over(val as u8)
+            }
+            #[doc = "Oversampling mode"]
+            pub fn set_over(&mut self, n: usize, val: super::vals::Over) {
+                assert!(n < 1usize);
+                let offs = 15usize + n * 0usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+            #[doc = "Driver Enable deassertion time"]
+            pub const fn dedt(&self) -> u8 {
+                let val = (self.0 >> 16usize) & 0x1f;
+                val as u8
+            }
+            #[doc = "Driver Enable deassertion time"]
+            pub fn set_dedt(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x1f << 16usize)) | (((val as u32) & 0x1f) << 16usize);
+            }
+            #[doc = "Driver Enable assertion time"]
+            pub const fn deat(&self) -> u8 {
+                let val = (self.0 >> 21usize) & 0x1f;
+                val as u8
+            }
+            #[doc = "Driver Enable assertion time"]
+            pub fn set_deat(&mut self, val: u8) {
+                self.0 = (self.0 & !(0x1f << 21usize)) | (((val as u32) & 0x1f) << 21usize);
+            }
+            #[doc = "Receiver timeout interrupt enable"]
+            pub const fn rtoie(&self) -> bool {
+                let val = (self.0 >> 26usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Receiver timeout interrupt enable"]
+            pub fn set_rtoie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 26usize)) | (((val as u32) & 0x01) << 26usize);
+            }
+            #[doc = "End of Block interrupt enable"]
+            pub const fn eobie(&self) -> bool {
+                let val = (self.0 >> 27usize) & 0x01;
+                val != 0
+            }
+            #[doc = "End of Block interrupt enable"]
+            pub fn set_eobie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 27usize)) | (((val as u32) & 0x01) << 27usize);
+            }
+        }
+        impl Default for Cr1 {
+            fn default() -> Cr1 {
+                Cr1(0)
+            }
+        }
+        #[doc = "Guard time and prescaler register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Gtpr(pub u32);
+        impl Gtpr {
+            #[doc = "Prescaler value"]
+            pub const fn psc(&self) -> u8 {
+                let val = (self.0 >> 0usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Prescaler value"]
+            pub fn set_psc(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 0usize)) | (((val as u32) & 0xff) << 0usize);
+            }
+            #[doc = "Guard time value"]
+            pub const fn gt(&self) -> u8 {
+                let val = (self.0 >> 8usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Guard time value"]
+            pub fn set_gt(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 8usize)) | (((val as u32) & 0xff) << 8usize);
+            }
+        }
+        impl Default for Gtpr {
+            fn default() -> Gtpr {
+                Gtpr(0)
+            }
+        }
+        #[doc = "Interrupt & status register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ixr(pub u32);
+        impl Ixr {
+            #[doc = "Parity error"]
+            pub const fn pe(&self) -> bool {
+                let val = (self.0 >> 0usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Parity error"]
+            pub fn set_pe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 0usize)) | (((val as u32) & 0x01) << 0usize);
+            }
+            #[doc = "Framing error"]
+            pub const fn fe(&self) -> bool {
+                let val = (self.0 >> 1usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Framing error"]
+            pub fn set_fe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 1usize)) | (((val as u32) & 0x01) << 1usize);
+            }
+            #[doc = "Noise detected flag"]
+            pub const fn nf(&self) -> bool {
+                let val = (self.0 >> 2usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Noise detected flag"]
+            pub fn set_nf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 2usize)) | (((val as u32) & 0x01) << 2usize);
+            }
+            #[doc = "Overrun error"]
+            pub const fn ore(&self) -> bool {
+                let val = (self.0 >> 3usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Overrun error"]
+            pub fn set_ore(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 3usize)) | (((val as u32) & 0x01) << 3usize);
+            }
+            #[doc = "Idle line detected"]
+            pub const fn idle(&self) -> bool {
+                let val = (self.0 >> 4usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Idle line detected"]
+            pub fn set_idle(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 4usize)) | (((val as u32) & 0x01) << 4usize);
+            }
+            #[doc = "Read data register not empty"]
+            pub const fn rxne(&self) -> bool {
+                let val = (self.0 >> 5usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Read data register not empty"]
+            pub fn set_rxne(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val as u32) & 0x01) << 5usize);
+            }
+            #[doc = "Transmission complete"]
+            pub const fn tc(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transmission complete"]
+            pub fn set_tc(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Transmit data register empty"]
+            pub const fn txe(&self) -> bool {
+                let val = (self.0 >> 7usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transmit data register empty"]
+            pub fn set_txe(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 7usize)) | (((val as u32) & 0x01) << 7usize);
+            }
+            #[doc = "LIN break detection flag"]
+            pub const fn lbdf(&self) -> bool {
+                let val = (self.0 >> 8usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LIN break detection flag"]
+            pub fn set_lbdf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val as u32) & 0x01) << 8usize);
+            }
+            #[doc = "CTS interrupt flag"]
+            pub const fn ctsif(&self) -> bool {
+                let val = (self.0 >> 9usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CTS interrupt flag"]
+            pub fn set_ctsif(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val as u32) & 0x01) << 9usize);
+            }
+            #[doc = "CTS flag"]
+            pub const fn cts(&self) -> bool {
+                let val = (self.0 >> 10usize) & 0x01;
+                val != 0
+            }
+            #[doc = "CTS flag"]
+            pub fn set_cts(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val as u32) & 0x01) << 10usize);
+            }
+            #[doc = "Receiver timeout"]
+            pub const fn rtof(&self) -> bool {
+                let val = (self.0 >> 11usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Receiver timeout"]
+            pub fn set_rtof(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
+            }
+            #[doc = "End of block flag"]
+            pub const fn eobf(&self) -> bool {
+                let val = (self.0 >> 12usize) & 0x01;
+                val != 0
+            }
+            #[doc = "End of block flag"]
+            pub fn set_eobf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 12usize)) | (((val as u32) & 0x01) << 12usize);
+            }
+            #[doc = "Auto baud rate error"]
+            pub const fn abre(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Auto baud rate error"]
+            pub fn set_abre(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+            #[doc = "Auto baud rate flag"]
+            pub const fn abrf(&self) -> bool {
+                let val = (self.0 >> 15usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Auto baud rate flag"]
+            pub fn set_abrf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val as u32) & 0x01) << 15usize);
+            }
+            #[doc = "Busy flag"]
+            pub const fn busy(&self) -> bool {
+                let val = (self.0 >> 16usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Busy flag"]
+            pub fn set_busy(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val as u32) & 0x01) << 16usize);
+            }
+            #[doc = "character match flag"]
+            pub const fn cmf(&self) -> bool {
+                let val = (self.0 >> 17usize) & 0x01;
+                val != 0
+            }
+            #[doc = "character match flag"]
+            pub fn set_cmf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val as u32) & 0x01) << 17usize);
+            }
+            #[doc = "Send break flag"]
+            pub const fn sbkf(&self) -> bool {
+                let val = (self.0 >> 18usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Send break flag"]
+            pub fn set_sbkf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val as u32) & 0x01) << 18usize);
+            }
+            #[doc = "Receiver wakeup from Mute mode"]
+            pub const fn rwu(&self) -> bool {
+                let val = (self.0 >> 19usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Receiver wakeup from Mute mode"]
+            pub fn set_rwu(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val as u32) & 0x01) << 19usize);
+            }
+            #[doc = "Wakeup from Stop mode flag"]
+            pub const fn wuf(&self) -> bool {
+                let val = (self.0 >> 20usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Wakeup from Stop mode flag"]
+            pub fn set_wuf(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
+            }
+            #[doc = "Transmit enable acknowledge flag"]
+            pub const fn teack(&self) -> bool {
+                let val = (self.0 >> 21usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Transmit enable acknowledge flag"]
+            pub fn set_teack(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 21usize)) | (((val as u32) & 0x01) << 21usize);
+            }
+            #[doc = "Receive enable acknowledge flag"]
+            pub const fn reack(&self) -> bool {
+                let val = (self.0 >> 22usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Receive enable acknowledge flag"]
+            pub fn set_reack(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 22usize)) | (((val as u32) & 0x01) << 22usize);
+            }
+        }
+        impl Default for Ixr {
+            fn default() -> Ixr {
+                Ixr(0)
+            }
+        }
+        #[doc = "Control register 2"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Cr2(pub u32);
+        impl Cr2 {
+            #[doc = "7-bit Address Detection/4-bit Address Detection"]
+            pub fn addm(&self, n: usize) -> super::vals::Addm {
+                assert!(n < 1usize);
+                let offs = 4usize + n * 0usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Addm(val as u8)
+            }
+            #[doc = "7-bit Address Detection/4-bit Address Detection"]
+            pub fn set_addm(&mut self, n: usize, val: super::vals::Addm) {
+                assert!(n < 1usize);
+                let offs = 4usize + n * 0usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+            #[doc = "LIN break detection length"]
+            pub const fn lbdl(&self) -> super::vals::Lbdl {
+                let val = (self.0 >> 5usize) & 0x01;
+                super::vals::Lbdl(val as u8)
+            }
+            #[doc = "LIN break detection length"]
+            pub fn set_lbdl(&mut self, val: super::vals::Lbdl) {
+                self.0 = (self.0 & !(0x01 << 5usize)) | (((val.0 as u32) & 0x01) << 5usize);
+            }
+            #[doc = "LIN break detection interrupt enable"]
+            pub const fn lbdie(&self) -> bool {
+                let val = (self.0 >> 6usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LIN break detection interrupt enable"]
+            pub fn set_lbdie(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 6usize)) | (((val as u32) & 0x01) << 6usize);
+            }
+            #[doc = "Last bit clock pulse"]
+            pub const fn lbcl(&self) -> super::vals::Lbcl {
+                let val = (self.0 >> 8usize) & 0x01;
+                super::vals::Lbcl(val as u8)
+            }
+            #[doc = "Last bit clock pulse"]
+            pub fn set_lbcl(&mut self, val: super::vals::Lbcl) {
+                self.0 = (self.0 & !(0x01 << 8usize)) | (((val.0 as u32) & 0x01) << 8usize);
+            }
+            #[doc = "Clock phase"]
+            pub const fn cpha(&self) -> super::vals::Cpha {
+                let val = (self.0 >> 9usize) & 0x01;
+                super::vals::Cpha(val as u8)
+            }
+            #[doc = "Clock phase"]
+            pub fn set_cpha(&mut self, val: super::vals::Cpha) {
+                self.0 = (self.0 & !(0x01 << 9usize)) | (((val.0 as u32) & 0x01) << 9usize);
+            }
+            #[doc = "Clock polarity"]
+            pub const fn cpol(&self) -> super::vals::Cpol {
+                let val = (self.0 >> 10usize) & 0x01;
+                super::vals::Cpol(val as u8)
+            }
+            #[doc = "Clock polarity"]
+            pub fn set_cpol(&mut self, val: super::vals::Cpol) {
+                self.0 = (self.0 & !(0x01 << 10usize)) | (((val.0 as u32) & 0x01) << 10usize);
+            }
+            #[doc = "Clock enable"]
+            pub const fn clken(&self) -> bool {
+                let val = (self.0 >> 11usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Clock enable"]
+            pub fn set_clken(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 11usize)) | (((val as u32) & 0x01) << 11usize);
+            }
+            #[doc = "STOP bits"]
+            pub const fn stop(&self) -> super::vals::Stop {
+                let val = (self.0 >> 12usize) & 0x03;
+                super::vals::Stop(val as u8)
+            }
+            #[doc = "STOP bits"]
+            pub fn set_stop(&mut self, val: super::vals::Stop) {
+                self.0 = (self.0 & !(0x03 << 12usize)) | (((val.0 as u32) & 0x03) << 12usize);
+            }
+            #[doc = "LIN mode enable"]
+            pub const fn linen(&self) -> bool {
+                let val = (self.0 >> 14usize) & 0x01;
+                val != 0
+            }
+            #[doc = "LIN mode enable"]
+            pub fn set_linen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 14usize)) | (((val as u32) & 0x01) << 14usize);
+            }
+            #[doc = "Swap TX/RX pins"]
+            pub const fn swap(&self) -> super::vals::Swap {
+                let val = (self.0 >> 15usize) & 0x01;
+                super::vals::Swap(val as u8)
+            }
+            #[doc = "Swap TX/RX pins"]
+            pub fn set_swap(&mut self, val: super::vals::Swap) {
+                self.0 = (self.0 & !(0x01 << 15usize)) | (((val.0 as u32) & 0x01) << 15usize);
+            }
+            #[doc = "RX pin active level inversion"]
+            pub const fn rxinv(&self) -> super::vals::Rxinv {
+                let val = (self.0 >> 16usize) & 0x01;
+                super::vals::Rxinv(val as u8)
+            }
+            #[doc = "RX pin active level inversion"]
+            pub fn set_rxinv(&mut self, val: super::vals::Rxinv) {
+                self.0 = (self.0 & !(0x01 << 16usize)) | (((val.0 as u32) & 0x01) << 16usize);
+            }
+            #[doc = "TX pin active level inversion"]
+            pub const fn txinv(&self) -> super::vals::Txinv {
+                let val = (self.0 >> 17usize) & 0x01;
+                super::vals::Txinv(val as u8)
+            }
+            #[doc = "TX pin active level inversion"]
+            pub fn set_txinv(&mut self, val: super::vals::Txinv) {
+                self.0 = (self.0 & !(0x01 << 17usize)) | (((val.0 as u32) & 0x01) << 17usize);
+            }
+            #[doc = "Binary data inversion"]
+            pub const fn datainv(&self) -> super::vals::Datainv {
+                let val = (self.0 >> 18usize) & 0x01;
+                super::vals::Datainv(val as u8)
+            }
+            #[doc = "Binary data inversion"]
+            pub fn set_datainv(&mut self, val: super::vals::Datainv) {
+                self.0 = (self.0 & !(0x01 << 18usize)) | (((val.0 as u32) & 0x01) << 18usize);
+            }
+            #[doc = "Most significant bit first"]
+            pub const fn msbfirst(&self) -> super::vals::Msbfirst {
+                let val = (self.0 >> 19usize) & 0x01;
+                super::vals::Msbfirst(val as u8)
+            }
+            #[doc = "Most significant bit first"]
+            pub fn set_msbfirst(&mut self, val: super::vals::Msbfirst) {
+                self.0 = (self.0 & !(0x01 << 19usize)) | (((val.0 as u32) & 0x01) << 19usize);
+            }
+            #[doc = "Auto baud rate enable"]
+            pub const fn abren(&self) -> bool {
+                let val = (self.0 >> 20usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Auto baud rate enable"]
+            pub fn set_abren(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 20usize)) | (((val as u32) & 0x01) << 20usize);
+            }
+            #[doc = "Auto baud rate mode"]
+            pub const fn abrmod(&self) -> super::vals::Abrmod {
+                let val = (self.0 >> 21usize) & 0x03;
+                super::vals::Abrmod(val as u8)
+            }
+            #[doc = "Auto baud rate mode"]
+            pub fn set_abrmod(&mut self, val: super::vals::Abrmod) {
+                self.0 = (self.0 & !(0x03 << 21usize)) | (((val.0 as u32) & 0x03) << 21usize);
+            }
+            #[doc = "Receiver timeout enable"]
+            pub const fn rtoen(&self) -> bool {
+                let val = (self.0 >> 23usize) & 0x01;
+                val != 0
+            }
+            #[doc = "Receiver timeout enable"]
+            pub fn set_rtoen(&mut self, val: bool) {
+                self.0 = (self.0 & !(0x01 << 23usize)) | (((val as u32) & 0x01) << 23usize);
+            }
+            #[doc = "Address of the USART node"]
+            pub const fn add(&self) -> u8 {
+                let val = (self.0 >> 24usize) & 0xff;
+                val as u8
+            }
+            #[doc = "Address of the USART node"]
+            pub fn set_add(&mut self, val: u8) {
+                self.0 = (self.0 & !(0xff << 24usize)) | (((val as u32) & 0xff) << 24usize);
+            }
+        }
+        impl Default for Cr2 {
+            fn default() -> Cr2 {
+                Cr2(0)
+            }
+        }
+        #[doc = "Baud rate register"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Brr(pub u32);
+        impl Brr {
+            #[doc = "mantissa of USARTDIV"]
+            pub const fn brr(&self) -> u16 {
+                let val = (self.0 >> 0usize) & 0xffff;
+                val as u16
+            }
+            #[doc = "mantissa of USARTDIV"]
+            pub fn set_brr(&mut self, val: u16) {
+                self.0 = (self.0 & !(0xffff << 0usize)) | (((val as u32) & 0xffff) << 0usize);
+            }
+        }
+        impl Default for Brr {
+            fn default() -> Brr {
+                Brr(0)
+            }
+        }
+    }
+}
+pub mod exti_v1 {
+    use crate::generic::*;
+    #[doc = "External interrupt/event controller"]
+    #[derive(Copy, Clone)]
+    pub struct Exti(pub *mut u8);
+    unsafe impl Send for Exti {}
+    unsafe impl Sync for Exti {}
+    impl Exti {
+        #[doc = "Interrupt mask register (EXTI_IMR)"]
+        pub fn imr(self) -> Reg<regs::Imr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(0usize)) }
+        }
+        #[doc = "Event mask register (EXTI_EMR)"]
+        pub fn emr(self) -> Reg<regs::Emr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(4usize)) }
+        }
+        #[doc = "Rising Trigger selection register (EXTI_RTSR)"]
+        pub fn rtsr(self) -> Reg<regs::Rtsr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(8usize)) }
+        }
+        #[doc = "Falling Trigger selection register (EXTI_FTSR)"]
+        pub fn ftsr(self) -> Reg<regs::Ftsr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(12usize)) }
+        }
+        #[doc = "Software interrupt event register (EXTI_SWIER)"]
+        pub fn swier(self) -> Reg<regs::Swier, RW> {
+            unsafe { Reg::from_ptr(self.0.add(16usize)) }
+        }
+        #[doc = "Pending register (EXTI_PR)"]
+        pub fn pr(self) -> Reg<regs::Pr, RW> {
+            unsafe { Reg::from_ptr(self.0.add(20usize)) }
+        }
+    }
+    pub mod vals {
+        use crate::generic::*;
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Mr(pub u8);
+        impl Mr {
+            #[doc = "Interrupt request line is masked"]
+            pub const MASKED: Self = Self(0);
+            #[doc = "Interrupt request line is unmasked"]
+            pub const UNMASKED: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Swierw(pub u8);
+        impl Swierw {
+            #[doc = "Generates an interrupt request"]
+            pub const PEND: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Prw(pub u8);
+        impl Prw {
+            #[doc = "Clears pending bit"]
+            pub const CLEAR: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Prr(pub u8);
+        impl Prr {
+            #[doc = "No trigger request occurred"]
+            pub const NOTPENDING: Self = Self(0);
+            #[doc = "Selected trigger request occurred"]
+            pub const PENDING: Self = Self(0x01);
+        }
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
+        pub struct Tr(pub u8);
+        impl Tr {
+            #[doc = "Falling edge trigger is disabled"]
+            pub const DISABLED: Self = Self(0);
+            #[doc = "Falling edge trigger is enabled"]
+            pub const ENABLED: Self = Self(0x01);
+        }
+    }
+    pub mod regs {
+        use crate::generic::*;
+        #[doc = "Software interrupt event register (EXTI_SWIER)"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Swier(pub u32);
+        impl Swier {
+            #[doc = "Software Interrupt on line 0"]
+            pub fn swier(&self, n: usize) -> bool {
+                assert!(n < 23usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Software Interrupt on line 0"]
+            pub fn set_swier(&mut self, n: usize, val: bool) {
+                assert!(n < 23usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Swier {
+            fn default() -> Swier {
+                Swier(0)
+            }
+        }
+        #[doc = "Pending register (EXTI_PR)"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Pr(pub u32);
+        impl Pr {
+            #[doc = "Pending bit 0"]
+            pub fn pr(&self, n: usize) -> bool {
+                assert!(n < 23usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                val != 0
+            }
+            #[doc = "Pending bit 0"]
+            pub fn set_pr(&mut self, n: usize, val: bool) {
+                assert!(n < 23usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Pr {
+            fn default() -> Pr {
+                Pr(0)
+            }
+        }
+        #[doc = "Falling Trigger selection register (EXTI_FTSR)"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Ftsr(pub u32);
+        impl Ftsr {
+            #[doc = "Falling trigger event configuration of line 0"]
+            pub fn tr(&self, n: usize) -> super::vals::Tr {
+                assert!(n < 23usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Tr(val as u8)
+            }
+            #[doc = "Falling trigger event configuration of line 0"]
+            pub fn set_tr(&mut self, n: usize, val: super::vals::Tr) {
+                assert!(n < 23usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Ftsr {
+            fn default() -> Ftsr {
+                Ftsr(0)
+            }
+        }
+        #[doc = "Event mask register (EXTI_EMR)"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Emr(pub u32);
+        impl Emr {
+            #[doc = "Event Mask on line 0"]
+            pub fn mr(&self, n: usize) -> super::vals::Mr {
+                assert!(n < 23usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Mr(val as u8)
+            }
+            #[doc = "Event Mask on line 0"]
+            pub fn set_mr(&mut self, n: usize, val: super::vals::Mr) {
+                assert!(n < 23usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Emr {
+            fn default() -> Emr {
+                Emr(0)
+            }
+        }
+        #[doc = "Interrupt mask register (EXTI_IMR)"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Imr(pub u32);
+        impl Imr {
+            #[doc = "Interrupt Mask on line 0"]
+            pub fn mr(&self, n: usize) -> super::vals::Mr {
+                assert!(n < 23usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Mr(val as u8)
+            }
+            #[doc = "Interrupt Mask on line 0"]
+            pub fn set_mr(&mut self, n: usize, val: super::vals::Mr) {
+                assert!(n < 23usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Imr {
+            fn default() -> Imr {
+                Imr(0)
+            }
+        }
+        #[doc = "Rising Trigger selection register (EXTI_RTSR)"]
+        #[repr(transparent)]
+        #[derive(Copy, Clone, Eq, PartialEq)]
+        pub struct Rtsr(pub u32);
+        impl Rtsr {
+            #[doc = "Rising trigger event configuration of line 0"]
+            pub fn tr(&self, n: usize) -> super::vals::Tr {
+                assert!(n < 23usize);
+                let offs = 0usize + n * 1usize;
+                let val = (self.0 >> offs) & 0x01;
+                super::vals::Tr(val as u8)
+            }
+            #[doc = "Rising trigger event configuration of line 0"]
+            pub fn set_tr(&mut self, n: usize, val: super::vals::Tr) {
+                assert!(n < 23usize);
+                let offs = 0usize + n * 1usize;
+                self.0 = (self.0 & !(0x01 << offs)) | (((val.0 as u32) & 0x01) << offs);
+            }
+        }
+        impl Default for Rtsr {
+            fn default() -> Rtsr {
+                Rtsr(0)
+            }
         }
     }
 }
diff --git a/embassy-stm32/src/pac/stm32f401cb.rs b/embassy-stm32/src/pac/stm32f401cb.rs
index 75324f9f..2409425c 100644
--- a/embassy-stm32/src/pac/stm32f401cb.rs
+++ b/embassy-stm32/src/pac/stm32f401cb.rs
@@ -153,14 +153,14 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 impl_spi_pin!(SPI3, MosiPin, PD6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f401cc.rs b/embassy-stm32/src/pac/stm32f401cc.rs
index 75324f9f..2409425c 100644
--- a/embassy-stm32/src/pac/stm32f401cc.rs
+++ b/embassy-stm32/src/pac/stm32f401cc.rs
@@ -153,14 +153,14 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 impl_spi_pin!(SPI3, MosiPin, PD6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f401cd.rs b/embassy-stm32/src/pac/stm32f401cd.rs
index 75324f9f..2409425c 100644
--- a/embassy-stm32/src/pac/stm32f401cd.rs
+++ b/embassy-stm32/src/pac/stm32f401cd.rs
@@ -153,14 +153,14 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 impl_spi_pin!(SPI3, MosiPin, PD6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f401ce.rs b/embassy-stm32/src/pac/stm32f401ce.rs
index 75324f9f..2409425c 100644
--- a/embassy-stm32/src/pac/stm32f401ce.rs
+++ b/embassy-stm32/src/pac/stm32f401ce.rs
@@ -153,14 +153,14 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 impl_spi_pin!(SPI3, MosiPin, PD6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f401rb.rs b/embassy-stm32/src/pac/stm32f401rb.rs
index 75324f9f..2409425c 100644
--- a/embassy-stm32/src/pac/stm32f401rb.rs
+++ b/embassy-stm32/src/pac/stm32f401rb.rs
@@ -153,14 +153,14 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 impl_spi_pin!(SPI3, MosiPin, PD6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f401rc.rs b/embassy-stm32/src/pac/stm32f401rc.rs
index 75324f9f..2409425c 100644
--- a/embassy-stm32/src/pac/stm32f401rc.rs
+++ b/embassy-stm32/src/pac/stm32f401rc.rs
@@ -153,14 +153,14 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 impl_spi_pin!(SPI3, MosiPin, PD6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f401rd.rs b/embassy-stm32/src/pac/stm32f401rd.rs
index 75324f9f..2409425c 100644
--- a/embassy-stm32/src/pac/stm32f401rd.rs
+++ b/embassy-stm32/src/pac/stm32f401rd.rs
@@ -153,14 +153,14 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 impl_spi_pin!(SPI3, MosiPin, PD6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f401re.rs b/embassy-stm32/src/pac/stm32f401re.rs
index 75324f9f..2409425c 100644
--- a/embassy-stm32/src/pac/stm32f401re.rs
+++ b/embassy-stm32/src/pac/stm32f401re.rs
@@ -153,14 +153,14 @@ impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 impl_spi_pin!(SPI3, MosiPin, PD6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f401vb.rs b/embassy-stm32/src/pac/stm32f401vb.rs
index 223e4d97..c4a1bdc7 100644
--- a/embassy-stm32/src/pac/stm32f401vb.rs
+++ b/embassy-stm32/src/pac/stm32f401vb.rs
@@ -161,14 +161,14 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5);
 impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f401vc.rs b/embassy-stm32/src/pac/stm32f401vc.rs
index 223e4d97..c4a1bdc7 100644
--- a/embassy-stm32/src/pac/stm32f401vc.rs
+++ b/embassy-stm32/src/pac/stm32f401vc.rs
@@ -161,14 +161,14 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5);
 impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f401vd.rs b/embassy-stm32/src/pac/stm32f401vd.rs
index 223e4d97..c4a1bdc7 100644
--- a/embassy-stm32/src/pac/stm32f401vd.rs
+++ b/embassy-stm32/src/pac/stm32f401vd.rs
@@ -161,14 +161,14 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5);
 impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f401ve.rs b/embassy-stm32/src/pac/stm32f401ve.rs
index 223e4d97..c4a1bdc7 100644
--- a/embassy-stm32/src/pac/stm32f401ve.rs
+++ b/embassy-stm32/src/pac/stm32f401ve.rs
@@ -161,14 +161,14 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5);
 impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f405oe.rs b/embassy-stm32/src/pac/stm32f405oe.rs
index 600deddf..28687020 100644
--- a/embassy-stm32/src/pac/stm32f405oe.rs
+++ b/embassy-stm32/src/pac/stm32f405oe.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f405og.rs b/embassy-stm32/src/pac/stm32f405og.rs
index 600deddf..28687020 100644
--- a/embassy-stm32/src/pac/stm32f405og.rs
+++ b/embassy-stm32/src/pac/stm32f405og.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f405rg.rs b/embassy-stm32/src/pac/stm32f405rg.rs
index 600deddf..28687020 100644
--- a/embassy-stm32/src/pac/stm32f405rg.rs
+++ b/embassy-stm32/src/pac/stm32f405rg.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f405vg.rs b/embassy-stm32/src/pac/stm32f405vg.rs
index 600deddf..28687020 100644
--- a/embassy-stm32/src/pac/stm32f405vg.rs
+++ b/embassy-stm32/src/pac/stm32f405vg.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f405zg.rs b/embassy-stm32/src/pac/stm32f405zg.rs
index 600deddf..28687020 100644
--- a/embassy-stm32/src/pac/stm32f405zg.rs
+++ b/embassy-stm32/src/pac/stm32f405zg.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f407ie.rs b/embassy-stm32/src/pac/stm32f407ie.rs
index fb6563f7..a13b237e 100644
--- a/embassy-stm32/src/pac/stm32f407ie.rs
+++ b/embassy-stm32/src/pac/stm32f407ie.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f407ig.rs b/embassy-stm32/src/pac/stm32f407ig.rs
index fb6563f7..a13b237e 100644
--- a/embassy-stm32/src/pac/stm32f407ig.rs
+++ b/embassy-stm32/src/pac/stm32f407ig.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f407ve.rs b/embassy-stm32/src/pac/stm32f407ve.rs
index fb6563f7..a13b237e 100644
--- a/embassy-stm32/src/pac/stm32f407ve.rs
+++ b/embassy-stm32/src/pac/stm32f407ve.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f407vg.rs b/embassy-stm32/src/pac/stm32f407vg.rs
index fb6563f7..a13b237e 100644
--- a/embassy-stm32/src/pac/stm32f407vg.rs
+++ b/embassy-stm32/src/pac/stm32f407vg.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f407ze.rs b/embassy-stm32/src/pac/stm32f407ze.rs
index fb6563f7..a13b237e 100644
--- a/embassy-stm32/src/pac/stm32f407ze.rs
+++ b/embassy-stm32/src/pac/stm32f407ze.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f407zg.rs b/embassy-stm32/src/pac/stm32f407zg.rs
index fb6563f7..a13b237e 100644
--- a/embassy-stm32/src/pac/stm32f407zg.rs
+++ b/embassy-stm32/src/pac/stm32f407zg.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f410c8.rs b/embassy-stm32/src/pac/stm32f410c8.rs
index 9a864a95..fa240cb6 100644
--- a/embassy-stm32/src/pac/stm32f410c8.rs
+++ b/embassy-stm32/src/pac/stm32f410c8.rs
@@ -95,11 +95,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x40080000 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f410cb.rs b/embassy-stm32/src/pac/stm32f410cb.rs
index 9a864a95..fa240cb6 100644
--- a/embassy-stm32/src/pac/stm32f410cb.rs
+++ b/embassy-stm32/src/pac/stm32f410cb.rs
@@ -95,11 +95,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x40080000 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f410r8.rs b/embassy-stm32/src/pac/stm32f410r8.rs
index 9a864a95..fa240cb6 100644
--- a/embassy-stm32/src/pac/stm32f410r8.rs
+++ b/embassy-stm32/src/pac/stm32f410r8.rs
@@ -95,11 +95,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x40080000 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f410rb.rs b/embassy-stm32/src/pac/stm32f410rb.rs
index 9a864a95..fa240cb6 100644
--- a/embassy-stm32/src/pac/stm32f410rb.rs
+++ b/embassy-stm32/src/pac/stm32f410rb.rs
@@ -95,11 +95,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x40080000 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f410t8.rs b/embassy-stm32/src/pac/stm32f410t8.rs
index 4d504953..428c005c 100644
--- a/embassy-stm32/src/pac/stm32f410t8.rs
+++ b/embassy-stm32/src/pac/stm32f410t8.rs
@@ -95,11 +95,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x40080000 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f410tb.rs b/embassy-stm32/src/pac/stm32f410tb.rs
index 4d504953..428c005c 100644
--- a/embassy-stm32/src/pac/stm32f410tb.rs
+++ b/embassy-stm32/src/pac/stm32f410tb.rs
@@ -95,11 +95,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x40080000 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f411cc.rs b/embassy-stm32/src/pac/stm32f411cc.rs
index 1b74230b..93e5b1f3 100644
--- a/embassy-stm32/src/pac/stm32f411cc.rs
+++ b/embassy-stm32/src/pac/stm32f411cc.rs
@@ -178,14 +178,14 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f411ce.rs b/embassy-stm32/src/pac/stm32f411ce.rs
index 1b74230b..93e5b1f3 100644
--- a/embassy-stm32/src/pac/stm32f411ce.rs
+++ b/embassy-stm32/src/pac/stm32f411ce.rs
@@ -178,14 +178,14 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f411rc.rs b/embassy-stm32/src/pac/stm32f411rc.rs
index 1b74230b..93e5b1f3 100644
--- a/embassy-stm32/src/pac/stm32f411rc.rs
+++ b/embassy-stm32/src/pac/stm32f411rc.rs
@@ -178,14 +178,14 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f411re.rs b/embassy-stm32/src/pac/stm32f411re.rs
index 1b74230b..93e5b1f3 100644
--- a/embassy-stm32/src/pac/stm32f411re.rs
+++ b/embassy-stm32/src/pac/stm32f411re.rs
@@ -178,14 +178,14 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f411vc.rs b/embassy-stm32/src/pac/stm32f411vc.rs
index 1b74230b..93e5b1f3 100644
--- a/embassy-stm32/src/pac/stm32f411vc.rs
+++ b/embassy-stm32/src/pac/stm32f411vc.rs
@@ -178,14 +178,14 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f411ve.rs b/embassy-stm32/src/pac/stm32f411ve.rs
index 1b74230b..93e5b1f3 100644
--- a/embassy-stm32/src/pac/stm32f411ve.rs
+++ b/embassy-stm32/src/pac/stm32f411ve.rs
@@ -178,14 +178,14 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f412ce.rs b/embassy-stm32/src/pac/stm32f412ce.rs
index 980b49b9..112091bd 100644
--- a/embassy-stm32/src/pac/stm32f412ce.rs
+++ b/embassy-stm32/src/pac/stm32f412ce.rs
@@ -132,20 +132,20 @@ impl_spi_pin!(SPI5, MisoPin, PA12, 6);
 impl_spi_pin!(SPI5, SckPin, PB0, 6);
 impl_spi_pin!(SPI5, MosiPin, PB8, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f412cg.rs b/embassy-stm32/src/pac/stm32f412cg.rs
index 980b49b9..112091bd 100644
--- a/embassy-stm32/src/pac/stm32f412cg.rs
+++ b/embassy-stm32/src/pac/stm32f412cg.rs
@@ -132,20 +132,20 @@ impl_spi_pin!(SPI5, MisoPin, PA12, 6);
 impl_spi_pin!(SPI5, SckPin, PB0, 6);
 impl_spi_pin!(SPI5, MosiPin, PB8, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f412re.rs b/embassy-stm32/src/pac/stm32f412re.rs
index 418913aa..84b094e5 100644
--- a/embassy-stm32/src/pac/stm32f412re.rs
+++ b/embassy-stm32/src/pac/stm32f412re.rs
@@ -151,20 +151,20 @@ impl_spi_pin!(SPI5, MisoPin, PA12, 6);
 impl_spi_pin!(SPI5, SckPin, PB0, 6);
 impl_spi_pin!(SPI5, MosiPin, PB8, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f412rg.rs b/embassy-stm32/src/pac/stm32f412rg.rs
index 418913aa..84b094e5 100644
--- a/embassy-stm32/src/pac/stm32f412rg.rs
+++ b/embassy-stm32/src/pac/stm32f412rg.rs
@@ -151,20 +151,20 @@ impl_spi_pin!(SPI5, MisoPin, PA12, 6);
 impl_spi_pin!(SPI5, SckPin, PB0, 6);
 impl_spi_pin!(SPI5, MosiPin, PB8, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f412ve.rs b/embassy-stm32/src/pac/stm32f412ve.rs
index 87c54e36..82162fff 100644
--- a/embassy-stm32/src/pac/stm32f412ve.rs
+++ b/embassy-stm32/src/pac/stm32f412ve.rs
@@ -214,20 +214,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f412vg.rs b/embassy-stm32/src/pac/stm32f412vg.rs
index 87c54e36..82162fff 100644
--- a/embassy-stm32/src/pac/stm32f412vg.rs
+++ b/embassy-stm32/src/pac/stm32f412vg.rs
@@ -214,20 +214,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f412ze.rs b/embassy-stm32/src/pac/stm32f412ze.rs
index 87c54e36..82162fff 100644
--- a/embassy-stm32/src/pac/stm32f412ze.rs
+++ b/embassy-stm32/src/pac/stm32f412ze.rs
@@ -214,20 +214,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f412zg.rs b/embassy-stm32/src/pac/stm32f412zg.rs
index 87c54e36..82162fff 100644
--- a/embassy-stm32/src/pac/stm32f412zg.rs
+++ b/embassy-stm32/src/pac/stm32f412zg.rs
@@ -214,20 +214,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f413cg.rs b/embassy-stm32/src/pac/stm32f413cg.rs
index e75301ba..8bee7e46 100644
--- a/embassy-stm32/src/pac/stm32f413cg.rs
+++ b/embassy-stm32/src/pac/stm32f413cg.rs
@@ -217,20 +217,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f413ch.rs b/embassy-stm32/src/pac/stm32f413ch.rs
index e75301ba..8bee7e46 100644
--- a/embassy-stm32/src/pac/stm32f413ch.rs
+++ b/embassy-stm32/src/pac/stm32f413ch.rs
@@ -217,20 +217,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f413mg.rs b/embassy-stm32/src/pac/stm32f413mg.rs
index e43cac1d..bf9db32b 100644
--- a/embassy-stm32/src/pac/stm32f413mg.rs
+++ b/embassy-stm32/src/pac/stm32f413mg.rs
@@ -217,20 +217,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f413mh.rs b/embassy-stm32/src/pac/stm32f413mh.rs
index e43cac1d..bf9db32b 100644
--- a/embassy-stm32/src/pac/stm32f413mh.rs
+++ b/embassy-stm32/src/pac/stm32f413mh.rs
@@ -217,20 +217,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f413rg.rs b/embassy-stm32/src/pac/stm32f413rg.rs
index e43cac1d..bf9db32b 100644
--- a/embassy-stm32/src/pac/stm32f413rg.rs
+++ b/embassy-stm32/src/pac/stm32f413rg.rs
@@ -217,20 +217,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f413rh.rs b/embassy-stm32/src/pac/stm32f413rh.rs
index e43cac1d..bf9db32b 100644
--- a/embassy-stm32/src/pac/stm32f413rh.rs
+++ b/embassy-stm32/src/pac/stm32f413rh.rs
@@ -217,20 +217,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f413vg.rs b/embassy-stm32/src/pac/stm32f413vg.rs
index e43cac1d..bf9db32b 100644
--- a/embassy-stm32/src/pac/stm32f413vg.rs
+++ b/embassy-stm32/src/pac/stm32f413vg.rs
@@ -217,20 +217,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f413vh.rs b/embassy-stm32/src/pac/stm32f413vh.rs
index e43cac1d..bf9db32b 100644
--- a/embassy-stm32/src/pac/stm32f413vh.rs
+++ b/embassy-stm32/src/pac/stm32f413vh.rs
@@ -217,20 +217,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f413zg.rs b/embassy-stm32/src/pac/stm32f413zg.rs
index e43cac1d..bf9db32b 100644
--- a/embassy-stm32/src/pac/stm32f413zg.rs
+++ b/embassy-stm32/src/pac/stm32f413zg.rs
@@ -217,20 +217,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f413zh.rs b/embassy-stm32/src/pac/stm32f413zh.rs
index e43cac1d..bf9db32b 100644
--- a/embassy-stm32/src/pac/stm32f413zh.rs
+++ b/embassy-stm32/src/pac/stm32f413zh.rs
@@ -217,20 +217,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f415og.rs b/embassy-stm32/src/pac/stm32f415og.rs
index 44361b42..c71590f0 100644
--- a/embassy-stm32/src/pac/stm32f415og.rs
+++ b/embassy-stm32/src/pac/stm32f415og.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f415rg.rs b/embassy-stm32/src/pac/stm32f415rg.rs
index 44361b42..c71590f0 100644
--- a/embassy-stm32/src/pac/stm32f415rg.rs
+++ b/embassy-stm32/src/pac/stm32f415rg.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f415vg.rs b/embassy-stm32/src/pac/stm32f415vg.rs
index 44361b42..c71590f0 100644
--- a/embassy-stm32/src/pac/stm32f415vg.rs
+++ b/embassy-stm32/src/pac/stm32f415vg.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f415zg.rs b/embassy-stm32/src/pac/stm32f415zg.rs
index 44361b42..c71590f0 100644
--- a/embassy-stm32/src/pac/stm32f415zg.rs
+++ b/embassy-stm32/src/pac/stm32f415zg.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f417ie.rs b/embassy-stm32/src/pac/stm32f417ie.rs
index 0ad3be7a..4bef5073 100644
--- a/embassy-stm32/src/pac/stm32f417ie.rs
+++ b/embassy-stm32/src/pac/stm32f417ie.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f417ig.rs b/embassy-stm32/src/pac/stm32f417ig.rs
index 0ad3be7a..4bef5073 100644
--- a/embassy-stm32/src/pac/stm32f417ig.rs
+++ b/embassy-stm32/src/pac/stm32f417ig.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f417ve.rs b/embassy-stm32/src/pac/stm32f417ve.rs
index 0ad3be7a..4bef5073 100644
--- a/embassy-stm32/src/pac/stm32f417ve.rs
+++ b/embassy-stm32/src/pac/stm32f417ve.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f417vg.rs b/embassy-stm32/src/pac/stm32f417vg.rs
index 0ad3be7a..4bef5073 100644
--- a/embassy-stm32/src/pac/stm32f417vg.rs
+++ b/embassy-stm32/src/pac/stm32f417vg.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f417ze.rs b/embassy-stm32/src/pac/stm32f417ze.rs
index 0ad3be7a..4bef5073 100644
--- a/embassy-stm32/src/pac/stm32f417ze.rs
+++ b/embassy-stm32/src/pac/stm32f417ze.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f417zg.rs b/embassy-stm32/src/pac/stm32f417zg.rs
index 0ad3be7a..4bef5073 100644
--- a/embassy-stm32/src/pac/stm32f417zg.rs
+++ b/embassy-stm32/src/pac/stm32f417zg.rs
@@ -207,20 +207,20 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f423ch.rs b/embassy-stm32/src/pac/stm32f423ch.rs
index 0069f840..7f2ac67d 100644
--- a/embassy-stm32/src/pac/stm32f423ch.rs
+++ b/embassy-stm32/src/pac/stm32f423ch.rs
@@ -217,20 +217,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f423mh.rs b/embassy-stm32/src/pac/stm32f423mh.rs
index d1a4de47..d895ec6e 100644
--- a/embassy-stm32/src/pac/stm32f423mh.rs
+++ b/embassy-stm32/src/pac/stm32f423mh.rs
@@ -217,20 +217,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f423rh.rs b/embassy-stm32/src/pac/stm32f423rh.rs
index d1a4de47..d895ec6e 100644
--- a/embassy-stm32/src/pac/stm32f423rh.rs
+++ b/embassy-stm32/src/pac/stm32f423rh.rs
@@ -217,20 +217,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f423vh.rs b/embassy-stm32/src/pac/stm32f423vh.rs
index d1a4de47..d895ec6e 100644
--- a/embassy-stm32/src/pac/stm32f423vh.rs
+++ b/embassy-stm32/src/pac/stm32f423vh.rs
@@ -217,20 +217,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f423zh.rs b/embassy-stm32/src/pac/stm32f423zh.rs
index d1a4de47..d895ec6e 100644
--- a/embassy-stm32/src/pac/stm32f423zh.rs
+++ b/embassy-stm32/src/pac/stm32f423zh.rs
@@ -217,20 +217,20 @@ impl_spi_pin!(SPI5, SckPin, PE2, 6);
 impl_spi_pin!(SPI5, MisoPin, PE5, 6);
 impl_spi_pin!(SPI5, MosiPin, PE6, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f427ag.rs b/embassy-stm32/src/pac/stm32f427ag.rs
index fb2ddfad..d2740500 100644
--- a/embassy-stm32/src/pac/stm32f427ag.rs
+++ b/embassy-stm32/src/pac/stm32f427ag.rs
@@ -259,20 +259,20 @@ impl_spi_pin!(SPI5, MosiPin, PF9, 5);
 impl_spi_pin!(SPI5, SckPin, PH6, 5);
 impl_spi_pin!(SPI5, MisoPin, PH7, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f427ai.rs b/embassy-stm32/src/pac/stm32f427ai.rs
index fb2ddfad..d2740500 100644
--- a/embassy-stm32/src/pac/stm32f427ai.rs
+++ b/embassy-stm32/src/pac/stm32f427ai.rs
@@ -259,20 +259,20 @@ impl_spi_pin!(SPI5, MosiPin, PF9, 5);
 impl_spi_pin!(SPI5, SckPin, PH6, 5);
 impl_spi_pin!(SPI5, MisoPin, PH7, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f427ig.rs b/embassy-stm32/src/pac/stm32f427ig.rs
index a25dce0e..1e756275 100644
--- a/embassy-stm32/src/pac/stm32f427ig.rs
+++ b/embassy-stm32/src/pac/stm32f427ig.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f427ii.rs b/embassy-stm32/src/pac/stm32f427ii.rs
index a25dce0e..1e756275 100644
--- a/embassy-stm32/src/pac/stm32f427ii.rs
+++ b/embassy-stm32/src/pac/stm32f427ii.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f427vg.rs b/embassy-stm32/src/pac/stm32f427vg.rs
index da56f07d..5f047069 100644
--- a/embassy-stm32/src/pac/stm32f427vg.rs
+++ b/embassy-stm32/src/pac/stm32f427vg.rs
@@ -251,20 +251,20 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5);
 impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f427vi.rs b/embassy-stm32/src/pac/stm32f427vi.rs
index da56f07d..5f047069 100644
--- a/embassy-stm32/src/pac/stm32f427vi.rs
+++ b/embassy-stm32/src/pac/stm32f427vi.rs
@@ -251,20 +251,20 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5);
 impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f427zg.rs b/embassy-stm32/src/pac/stm32f427zg.rs
index a25dce0e..1e756275 100644
--- a/embassy-stm32/src/pac/stm32f427zg.rs
+++ b/embassy-stm32/src/pac/stm32f427zg.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f427zi.rs b/embassy-stm32/src/pac/stm32f427zi.rs
index a25dce0e..1e756275 100644
--- a/embassy-stm32/src/pac/stm32f427zi.rs
+++ b/embassy-stm32/src/pac/stm32f427zi.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429ag.rs b/embassy-stm32/src/pac/stm32f429ag.rs
index 2dc4fc73..253eb847 100644
--- a/embassy-stm32/src/pac/stm32f429ag.rs
+++ b/embassy-stm32/src/pac/stm32f429ag.rs
@@ -259,20 +259,20 @@ impl_spi_pin!(SPI5, MosiPin, PF9, 5);
 impl_spi_pin!(SPI5, SckPin, PH6, 5);
 impl_spi_pin!(SPI5, MisoPin, PH7, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429ai.rs b/embassy-stm32/src/pac/stm32f429ai.rs
index 2dc4fc73..253eb847 100644
--- a/embassy-stm32/src/pac/stm32f429ai.rs
+++ b/embassy-stm32/src/pac/stm32f429ai.rs
@@ -259,20 +259,20 @@ impl_spi_pin!(SPI5, MosiPin, PF9, 5);
 impl_spi_pin!(SPI5, SckPin, PH6, 5);
 impl_spi_pin!(SPI5, MisoPin, PH7, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429be.rs b/embassy-stm32/src/pac/stm32f429be.rs
index c89bbc0b..231f7e0d 100644
--- a/embassy-stm32/src/pac/stm32f429be.rs
+++ b/embassy-stm32/src/pac/stm32f429be.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429bg.rs b/embassy-stm32/src/pac/stm32f429bg.rs
index c89bbc0b..231f7e0d 100644
--- a/embassy-stm32/src/pac/stm32f429bg.rs
+++ b/embassy-stm32/src/pac/stm32f429bg.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429bi.rs b/embassy-stm32/src/pac/stm32f429bi.rs
index c89bbc0b..231f7e0d 100644
--- a/embassy-stm32/src/pac/stm32f429bi.rs
+++ b/embassy-stm32/src/pac/stm32f429bi.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429ie.rs b/embassy-stm32/src/pac/stm32f429ie.rs
index c89bbc0b..231f7e0d 100644
--- a/embassy-stm32/src/pac/stm32f429ie.rs
+++ b/embassy-stm32/src/pac/stm32f429ie.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429ig.rs b/embassy-stm32/src/pac/stm32f429ig.rs
index c89bbc0b..231f7e0d 100644
--- a/embassy-stm32/src/pac/stm32f429ig.rs
+++ b/embassy-stm32/src/pac/stm32f429ig.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429ii.rs b/embassy-stm32/src/pac/stm32f429ii.rs
index c89bbc0b..231f7e0d 100644
--- a/embassy-stm32/src/pac/stm32f429ii.rs
+++ b/embassy-stm32/src/pac/stm32f429ii.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429ne.rs b/embassy-stm32/src/pac/stm32f429ne.rs
index c89bbc0b..231f7e0d 100644
--- a/embassy-stm32/src/pac/stm32f429ne.rs
+++ b/embassy-stm32/src/pac/stm32f429ne.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429ng.rs b/embassy-stm32/src/pac/stm32f429ng.rs
index c89bbc0b..231f7e0d 100644
--- a/embassy-stm32/src/pac/stm32f429ng.rs
+++ b/embassy-stm32/src/pac/stm32f429ng.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429ni.rs b/embassy-stm32/src/pac/stm32f429ni.rs
index c89bbc0b..231f7e0d 100644
--- a/embassy-stm32/src/pac/stm32f429ni.rs
+++ b/embassy-stm32/src/pac/stm32f429ni.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429ve.rs b/embassy-stm32/src/pac/stm32f429ve.rs
index 32f08b8a..a02c86ff 100644
--- a/embassy-stm32/src/pac/stm32f429ve.rs
+++ b/embassy-stm32/src/pac/stm32f429ve.rs
@@ -251,20 +251,20 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5);
 impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429vg.rs b/embassy-stm32/src/pac/stm32f429vg.rs
index 32f08b8a..a02c86ff 100644
--- a/embassy-stm32/src/pac/stm32f429vg.rs
+++ b/embassy-stm32/src/pac/stm32f429vg.rs
@@ -251,20 +251,20 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5);
 impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429vi.rs b/embassy-stm32/src/pac/stm32f429vi.rs
index 32f08b8a..a02c86ff 100644
--- a/embassy-stm32/src/pac/stm32f429vi.rs
+++ b/embassy-stm32/src/pac/stm32f429vi.rs
@@ -251,20 +251,20 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5);
 impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429ze.rs b/embassy-stm32/src/pac/stm32f429ze.rs
index c89bbc0b..231f7e0d 100644
--- a/embassy-stm32/src/pac/stm32f429ze.rs
+++ b/embassy-stm32/src/pac/stm32f429ze.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429zg.rs b/embassy-stm32/src/pac/stm32f429zg.rs
index c89bbc0b..231f7e0d 100644
--- a/embassy-stm32/src/pac/stm32f429zg.rs
+++ b/embassy-stm32/src/pac/stm32f429zg.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f429zi.rs b/embassy-stm32/src/pac/stm32f429zi.rs
index c89bbc0b..231f7e0d 100644
--- a/embassy-stm32/src/pac/stm32f429zi.rs
+++ b/embassy-stm32/src/pac/stm32f429zi.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f437ai.rs b/embassy-stm32/src/pac/stm32f437ai.rs
index 32a212e4..07e90668 100644
--- a/embassy-stm32/src/pac/stm32f437ai.rs
+++ b/embassy-stm32/src/pac/stm32f437ai.rs
@@ -259,20 +259,20 @@ impl_spi_pin!(SPI5, MosiPin, PF9, 5);
 impl_spi_pin!(SPI5, SckPin, PH6, 5);
 impl_spi_pin!(SPI5, MisoPin, PH7, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f437ig.rs b/embassy-stm32/src/pac/stm32f437ig.rs
index 4f0c7659..8a9a1e31 100644
--- a/embassy-stm32/src/pac/stm32f437ig.rs
+++ b/embassy-stm32/src/pac/stm32f437ig.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f437ii.rs b/embassy-stm32/src/pac/stm32f437ii.rs
index 4f0c7659..8a9a1e31 100644
--- a/embassy-stm32/src/pac/stm32f437ii.rs
+++ b/embassy-stm32/src/pac/stm32f437ii.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f437vg.rs b/embassy-stm32/src/pac/stm32f437vg.rs
index 01b39c85..0341208c 100644
--- a/embassy-stm32/src/pac/stm32f437vg.rs
+++ b/embassy-stm32/src/pac/stm32f437vg.rs
@@ -251,20 +251,20 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5);
 impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f437vi.rs b/embassy-stm32/src/pac/stm32f437vi.rs
index 01b39c85..0341208c 100644
--- a/embassy-stm32/src/pac/stm32f437vi.rs
+++ b/embassy-stm32/src/pac/stm32f437vi.rs
@@ -251,20 +251,20 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5);
 impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f437zg.rs b/embassy-stm32/src/pac/stm32f437zg.rs
index 4f0c7659..8a9a1e31 100644
--- a/embassy-stm32/src/pac/stm32f437zg.rs
+++ b/embassy-stm32/src/pac/stm32f437zg.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f437zi.rs b/embassy-stm32/src/pac/stm32f437zi.rs
index 4f0c7659..8a9a1e31 100644
--- a/embassy-stm32/src/pac/stm32f437zi.rs
+++ b/embassy-stm32/src/pac/stm32f437zi.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f439ai.rs b/embassy-stm32/src/pac/stm32f439ai.rs
index 43f48313..608697e1 100644
--- a/embassy-stm32/src/pac/stm32f439ai.rs
+++ b/embassy-stm32/src/pac/stm32f439ai.rs
@@ -259,20 +259,20 @@ impl_spi_pin!(SPI5, MosiPin, PF9, 5);
 impl_spi_pin!(SPI5, SckPin, PH6, 5);
 impl_spi_pin!(SPI5, MisoPin, PH7, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f439bg.rs b/embassy-stm32/src/pac/stm32f439bg.rs
index 09944129..319d4cbb 100644
--- a/embassy-stm32/src/pac/stm32f439bg.rs
+++ b/embassy-stm32/src/pac/stm32f439bg.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f439bi.rs b/embassy-stm32/src/pac/stm32f439bi.rs
index 09944129..319d4cbb 100644
--- a/embassy-stm32/src/pac/stm32f439bi.rs
+++ b/embassy-stm32/src/pac/stm32f439bi.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f439ig.rs b/embassy-stm32/src/pac/stm32f439ig.rs
index 09944129..319d4cbb 100644
--- a/embassy-stm32/src/pac/stm32f439ig.rs
+++ b/embassy-stm32/src/pac/stm32f439ig.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f439ii.rs b/embassy-stm32/src/pac/stm32f439ii.rs
index 09944129..319d4cbb 100644
--- a/embassy-stm32/src/pac/stm32f439ii.rs
+++ b/embassy-stm32/src/pac/stm32f439ii.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f439ng.rs b/embassy-stm32/src/pac/stm32f439ng.rs
index 09944129..319d4cbb 100644
--- a/embassy-stm32/src/pac/stm32f439ng.rs
+++ b/embassy-stm32/src/pac/stm32f439ng.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f439ni.rs b/embassy-stm32/src/pac/stm32f439ni.rs
index 09944129..319d4cbb 100644
--- a/embassy-stm32/src/pac/stm32f439ni.rs
+++ b/embassy-stm32/src/pac/stm32f439ni.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f439vg.rs b/embassy-stm32/src/pac/stm32f439vg.rs
index 14667064..753ff257 100644
--- a/embassy-stm32/src/pac/stm32f439vg.rs
+++ b/embassy-stm32/src/pac/stm32f439vg.rs
@@ -251,20 +251,20 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5);
 impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f439vi.rs b/embassy-stm32/src/pac/stm32f439vi.rs
index 14667064..753ff257 100644
--- a/embassy-stm32/src/pac/stm32f439vi.rs
+++ b/embassy-stm32/src/pac/stm32f439vi.rs
@@ -251,20 +251,20 @@ impl_spi_pin!(SPI4, SckPin, PE2, 5);
 impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f439zg.rs b/embassy-stm32/src/pac/stm32f439zg.rs
index 09944129..319d4cbb 100644
--- a/embassy-stm32/src/pac/stm32f439zg.rs
+++ b/embassy-stm32/src/pac/stm32f439zg.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f439zi.rs b/embassy-stm32/src/pac/stm32f439zi.rs
index 09944129..319d4cbb 100644
--- a/embassy-stm32/src/pac/stm32f439zi.rs
+++ b/embassy-stm32/src/pac/stm32f439zi.rs
@@ -264,20 +264,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f446mc.rs b/embassy-stm32/src/pac/stm32f446mc.rs
index a3d7e020..040b3d66 100644
--- a/embassy-stm32/src/pac/stm32f446mc.rs
+++ b/embassy-stm32/src/pac/stm32f446mc.rs
@@ -206,20 +206,20 @@ impl_spi_pin!(SPI4, SckPin, PG11, 6);
 impl_spi_pin!(SPI4, MisoPin, PG12, 6);
 impl_spi_pin!(SPI4, MosiPin, PG13, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f446me.rs b/embassy-stm32/src/pac/stm32f446me.rs
index a3d7e020..040b3d66 100644
--- a/embassy-stm32/src/pac/stm32f446me.rs
+++ b/embassy-stm32/src/pac/stm32f446me.rs
@@ -206,20 +206,20 @@ impl_spi_pin!(SPI4, SckPin, PG11, 6);
 impl_spi_pin!(SPI4, MisoPin, PG12, 6);
 impl_spi_pin!(SPI4, MosiPin, PG13, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f446rc.rs b/embassy-stm32/src/pac/stm32f446rc.rs
index 60a7e17f..cae71b06 100644
--- a/embassy-stm32/src/pac/stm32f446rc.rs
+++ b/embassy-stm32/src/pac/stm32f446rc.rs
@@ -194,20 +194,20 @@ impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 impl_spi_pin!(SPI3, MosiPin, PD0, 6);
 impl_spi_pin!(SPI3, MosiPin, PD6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f446re.rs b/embassy-stm32/src/pac/stm32f446re.rs
index 60a7e17f..cae71b06 100644
--- a/embassy-stm32/src/pac/stm32f446re.rs
+++ b/embassy-stm32/src/pac/stm32f446re.rs
@@ -194,20 +194,20 @@ impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 impl_spi_pin!(SPI3, MosiPin, PD0, 6);
 impl_spi_pin!(SPI3, MosiPin, PD6, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f446vc.rs b/embassy-stm32/src/pac/stm32f446vc.rs
index a3d7e020..040b3d66 100644
--- a/embassy-stm32/src/pac/stm32f446vc.rs
+++ b/embassy-stm32/src/pac/stm32f446vc.rs
@@ -206,20 +206,20 @@ impl_spi_pin!(SPI4, SckPin, PG11, 6);
 impl_spi_pin!(SPI4, MisoPin, PG12, 6);
 impl_spi_pin!(SPI4, MosiPin, PG13, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f446ve.rs b/embassy-stm32/src/pac/stm32f446ve.rs
index a3d7e020..040b3d66 100644
--- a/embassy-stm32/src/pac/stm32f446ve.rs
+++ b/embassy-stm32/src/pac/stm32f446ve.rs
@@ -206,20 +206,20 @@ impl_spi_pin!(SPI4, SckPin, PG11, 6);
 impl_spi_pin!(SPI4, MisoPin, PG12, 6);
 impl_spi_pin!(SPI4, MosiPin, PG13, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f446zc.rs b/embassy-stm32/src/pac/stm32f446zc.rs
index a3d7e020..040b3d66 100644
--- a/embassy-stm32/src/pac/stm32f446zc.rs
+++ b/embassy-stm32/src/pac/stm32f446zc.rs
@@ -206,20 +206,20 @@ impl_spi_pin!(SPI4, SckPin, PG11, 6);
 impl_spi_pin!(SPI4, MisoPin, PG12, 6);
 impl_spi_pin!(SPI4, MosiPin, PG13, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f446ze.rs b/embassy-stm32/src/pac/stm32f446ze.rs
index a3d7e020..040b3d66 100644
--- a/embassy-stm32/src/pac/stm32f446ze.rs
+++ b/embassy-stm32/src/pac/stm32f446ze.rs
@@ -206,20 +206,20 @@ impl_spi_pin!(SPI4, SckPin, PG11, 6);
 impl_spi_pin!(SPI4, MisoPin, PG12, 6);
 impl_spi_pin!(SPI4, MosiPin, PG13, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469ae.rs b/embassy-stm32/src/pac/stm32f469ae.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469ae.rs
+++ b/embassy-stm32/src/pac/stm32f469ae.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469ag.rs b/embassy-stm32/src/pac/stm32f469ag.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469ag.rs
+++ b/embassy-stm32/src/pac/stm32f469ag.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469ai.rs b/embassy-stm32/src/pac/stm32f469ai.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469ai.rs
+++ b/embassy-stm32/src/pac/stm32f469ai.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469be.rs b/embassy-stm32/src/pac/stm32f469be.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469be.rs
+++ b/embassy-stm32/src/pac/stm32f469be.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469bg.rs b/embassy-stm32/src/pac/stm32f469bg.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469bg.rs
+++ b/embassy-stm32/src/pac/stm32f469bg.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469bi.rs b/embassy-stm32/src/pac/stm32f469bi.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469bi.rs
+++ b/embassy-stm32/src/pac/stm32f469bi.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469ie.rs b/embassy-stm32/src/pac/stm32f469ie.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469ie.rs
+++ b/embassy-stm32/src/pac/stm32f469ie.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469ig.rs b/embassy-stm32/src/pac/stm32f469ig.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469ig.rs
+++ b/embassy-stm32/src/pac/stm32f469ig.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469ii.rs b/embassy-stm32/src/pac/stm32f469ii.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469ii.rs
+++ b/embassy-stm32/src/pac/stm32f469ii.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469ne.rs b/embassy-stm32/src/pac/stm32f469ne.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469ne.rs
+++ b/embassy-stm32/src/pac/stm32f469ne.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469ng.rs b/embassy-stm32/src/pac/stm32f469ng.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469ng.rs
+++ b/embassy-stm32/src/pac/stm32f469ng.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469ni.rs b/embassy-stm32/src/pac/stm32f469ni.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469ni.rs
+++ b/embassy-stm32/src/pac/stm32f469ni.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469ve.rs b/embassy-stm32/src/pac/stm32f469ve.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469ve.rs
+++ b/embassy-stm32/src/pac/stm32f469ve.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469vg.rs b/embassy-stm32/src/pac/stm32f469vg.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469vg.rs
+++ b/embassy-stm32/src/pac/stm32f469vg.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469vi.rs b/embassy-stm32/src/pac/stm32f469vi.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469vi.rs
+++ b/embassy-stm32/src/pac/stm32f469vi.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469ze.rs b/embassy-stm32/src/pac/stm32f469ze.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469ze.rs
+++ b/embassy-stm32/src/pac/stm32f469ze.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469zg.rs b/embassy-stm32/src/pac/stm32f469zg.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469zg.rs
+++ b/embassy-stm32/src/pac/stm32f469zg.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f469zi.rs b/embassy-stm32/src/pac/stm32f469zi.rs
index 76ac7943..90bd2b15 100644
--- a/embassy-stm32/src/pac/stm32f469zi.rs
+++ b/embassy-stm32/src/pac/stm32f469zi.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f479ag.rs b/embassy-stm32/src/pac/stm32f479ag.rs
index 36f35ba2..c27b82ae 100644
--- a/embassy-stm32/src/pac/stm32f479ag.rs
+++ b/embassy-stm32/src/pac/stm32f479ag.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f479ai.rs b/embassy-stm32/src/pac/stm32f479ai.rs
index 36f35ba2..c27b82ae 100644
--- a/embassy-stm32/src/pac/stm32f479ai.rs
+++ b/embassy-stm32/src/pac/stm32f479ai.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f479bg.rs b/embassy-stm32/src/pac/stm32f479bg.rs
index 36f35ba2..c27b82ae 100644
--- a/embassy-stm32/src/pac/stm32f479bg.rs
+++ b/embassy-stm32/src/pac/stm32f479bg.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f479bi.rs b/embassy-stm32/src/pac/stm32f479bi.rs
index 36f35ba2..c27b82ae 100644
--- a/embassy-stm32/src/pac/stm32f479bi.rs
+++ b/embassy-stm32/src/pac/stm32f479bi.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f479ig.rs b/embassy-stm32/src/pac/stm32f479ig.rs
index 36f35ba2..c27b82ae 100644
--- a/embassy-stm32/src/pac/stm32f479ig.rs
+++ b/embassy-stm32/src/pac/stm32f479ig.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f479ii.rs b/embassy-stm32/src/pac/stm32f479ii.rs
index 36f35ba2..c27b82ae 100644
--- a/embassy-stm32/src/pac/stm32f479ii.rs
+++ b/embassy-stm32/src/pac/stm32f479ii.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f479ng.rs b/embassy-stm32/src/pac/stm32f479ng.rs
index 36f35ba2..c27b82ae 100644
--- a/embassy-stm32/src/pac/stm32f479ng.rs
+++ b/embassy-stm32/src/pac/stm32f479ng.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f479ni.rs b/embassy-stm32/src/pac/stm32f479ni.rs
index 36f35ba2..c27b82ae 100644
--- a/embassy-stm32/src/pac/stm32f479ni.rs
+++ b/embassy-stm32/src/pac/stm32f479ni.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f479vg.rs b/embassy-stm32/src/pac/stm32f479vg.rs
index 36f35ba2..c27b82ae 100644
--- a/embassy-stm32/src/pac/stm32f479vg.rs
+++ b/embassy-stm32/src/pac/stm32f479vg.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f479vi.rs b/embassy-stm32/src/pac/stm32f479vi.rs
index 36f35ba2..c27b82ae 100644
--- a/embassy-stm32/src/pac/stm32f479vi.rs
+++ b/embassy-stm32/src/pac/stm32f479vi.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f479zg.rs b/embassy-stm32/src/pac/stm32f479zg.rs
index 36f35ba2..c27b82ae 100644
--- a/embassy-stm32/src/pac/stm32f479zg.rs
+++ b/embassy-stm32/src/pac/stm32f479zg.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32f479zi.rs b/embassy-stm32/src/pac/stm32f479zi.rs
index 36f35ba2..c27b82ae 100644
--- a/embassy-stm32/src/pac/stm32f479zi.rs
+++ b/embassy-stm32/src/pac/stm32f479zi.rs
@@ -214,20 +214,20 @@ impl_gpio_pin!(PK15, 10, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, HASH_RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40013800 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM10: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM11: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
-pub const TIM9: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM10: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM11: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
+pub const TIM9: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40011000 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32h723ve.rs b/embassy-stm32/src/pac/stm32h723ve.rs
index f9d3dc7c..7e939d57 100644
--- a/embassy-stm32/src/pac/stm32h723ve.rs
+++ b/embassy-stm32/src/pac/stm32h723ve.rs
@@ -291,22 +291,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h723vg.rs b/embassy-stm32/src/pac/stm32h723vg.rs
index f9d3dc7c..7e939d57 100644
--- a/embassy-stm32/src/pac/stm32h723vg.rs
+++ b/embassy-stm32/src/pac/stm32h723vg.rs
@@ -291,22 +291,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h723ze.rs b/embassy-stm32/src/pac/stm32h723ze.rs
index fd84abb0..5cc424b6 100644
--- a/embassy-stm32/src/pac/stm32h723ze.rs
+++ b/embassy-stm32/src/pac/stm32h723ze.rs
@@ -302,22 +302,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h723zg.rs b/embassy-stm32/src/pac/stm32h723zg.rs
index fd84abb0..5cc424b6 100644
--- a/embassy-stm32/src/pac/stm32h723zg.rs
+++ b/embassy-stm32/src/pac/stm32h723zg.rs
@@ -302,22 +302,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h725ae.rs b/embassy-stm32/src/pac/stm32h725ae.rs
index fd84abb0..5cc424b6 100644
--- a/embassy-stm32/src/pac/stm32h725ae.rs
+++ b/embassy-stm32/src/pac/stm32h725ae.rs
@@ -302,22 +302,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h725ag.rs b/embassy-stm32/src/pac/stm32h725ag.rs
index fd84abb0..5cc424b6 100644
--- a/embassy-stm32/src/pac/stm32h725ag.rs
+++ b/embassy-stm32/src/pac/stm32h725ag.rs
@@ -302,22 +302,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h725ie.rs b/embassy-stm32/src/pac/stm32h725ie.rs
index fd84abb0..5cc424b6 100644
--- a/embassy-stm32/src/pac/stm32h725ie.rs
+++ b/embassy-stm32/src/pac/stm32h725ie.rs
@@ -302,22 +302,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h725ig.rs b/embassy-stm32/src/pac/stm32h725ig.rs
index fd84abb0..5cc424b6 100644
--- a/embassy-stm32/src/pac/stm32h725ig.rs
+++ b/embassy-stm32/src/pac/stm32h725ig.rs
@@ -302,22 +302,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h725re.rs b/embassy-stm32/src/pac/stm32h725re.rs
index c59d5704..615397e1 100644
--- a/embassy-stm32/src/pac/stm32h725re.rs
+++ b/embassy-stm32/src/pac/stm32h725re.rs
@@ -282,22 +282,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h725rg.rs b/embassy-stm32/src/pac/stm32h725rg.rs
index c59d5704..615397e1 100644
--- a/embassy-stm32/src/pac/stm32h725rg.rs
+++ b/embassy-stm32/src/pac/stm32h725rg.rs
@@ -282,22 +282,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h725ve.rs b/embassy-stm32/src/pac/stm32h725ve.rs
index f9d3dc7c..7e939d57 100644
--- a/embassy-stm32/src/pac/stm32h725ve.rs
+++ b/embassy-stm32/src/pac/stm32h725ve.rs
@@ -291,22 +291,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h725vg.rs b/embassy-stm32/src/pac/stm32h725vg.rs
index f9d3dc7c..7e939d57 100644
--- a/embassy-stm32/src/pac/stm32h725vg.rs
+++ b/embassy-stm32/src/pac/stm32h725vg.rs
@@ -291,22 +291,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h725ze.rs b/embassy-stm32/src/pac/stm32h725ze.rs
index fd84abb0..5cc424b6 100644
--- a/embassy-stm32/src/pac/stm32h725ze.rs
+++ b/embassy-stm32/src/pac/stm32h725ze.rs
@@ -302,22 +302,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h725zg.rs b/embassy-stm32/src/pac/stm32h725zg.rs
index fd84abb0..5cc424b6 100644
--- a/embassy-stm32/src/pac/stm32h725zg.rs
+++ b/embassy-stm32/src/pac/stm32h725zg.rs
@@ -302,22 +302,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h730ab.rs b/embassy-stm32/src/pac/stm32h730ab.rs
index 1abd0fc4..1455ce73 100644
--- a/embassy-stm32/src/pac/stm32h730ab.rs
+++ b/embassy-stm32/src/pac/stm32h730ab.rs
@@ -302,22 +302,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h730ib.rs b/embassy-stm32/src/pac/stm32h730ib.rs
index 1abd0fc4..1455ce73 100644
--- a/embassy-stm32/src/pac/stm32h730ib.rs
+++ b/embassy-stm32/src/pac/stm32h730ib.rs
@@ -302,22 +302,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h730vb.rs b/embassy-stm32/src/pac/stm32h730vb.rs
index 51645eb9..d050e001 100644
--- a/embassy-stm32/src/pac/stm32h730vb.rs
+++ b/embassy-stm32/src/pac/stm32h730vb.rs
@@ -291,22 +291,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h730zb.rs b/embassy-stm32/src/pac/stm32h730zb.rs
index 1abd0fc4..1455ce73 100644
--- a/embassy-stm32/src/pac/stm32h730zb.rs
+++ b/embassy-stm32/src/pac/stm32h730zb.rs
@@ -302,22 +302,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h733vg.rs b/embassy-stm32/src/pac/stm32h733vg.rs
index 51645eb9..d050e001 100644
--- a/embassy-stm32/src/pac/stm32h733vg.rs
+++ b/embassy-stm32/src/pac/stm32h733vg.rs
@@ -291,22 +291,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h733zg.rs b/embassy-stm32/src/pac/stm32h733zg.rs
index 1abd0fc4..1455ce73 100644
--- a/embassy-stm32/src/pac/stm32h733zg.rs
+++ b/embassy-stm32/src/pac/stm32h733zg.rs
@@ -302,22 +302,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h735ag.rs b/embassy-stm32/src/pac/stm32h735ag.rs
index 1abd0fc4..1455ce73 100644
--- a/embassy-stm32/src/pac/stm32h735ag.rs
+++ b/embassy-stm32/src/pac/stm32h735ag.rs
@@ -302,22 +302,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h735ig.rs b/embassy-stm32/src/pac/stm32h735ig.rs
index 1abd0fc4..1455ce73 100644
--- a/embassy-stm32/src/pac/stm32h735ig.rs
+++ b/embassy-stm32/src/pac/stm32h735ig.rs
@@ -302,22 +302,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h735rg.rs b/embassy-stm32/src/pac/stm32h735rg.rs
index d74eda8e..4f990915 100644
--- a/embassy-stm32/src/pac/stm32h735rg.rs
+++ b/embassy-stm32/src/pac/stm32h735rg.rs
@@ -282,22 +282,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h735vg.rs b/embassy-stm32/src/pac/stm32h735vg.rs
index 51645eb9..d050e001 100644
--- a/embassy-stm32/src/pac/stm32h735vg.rs
+++ b/embassy-stm32/src/pac/stm32h735vg.rs
@@ -291,22 +291,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h735zg.rs b/embassy-stm32/src/pac/stm32h735zg.rs
index 1abd0fc4..1455ce73 100644
--- a/embassy-stm32/src/pac/stm32h735zg.rs
+++ b/embassy-stm32/src/pac/stm32h735zg.rs
@@ -302,22 +302,22 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM23: timer::Tim_gp16 = timer::Tim_gp16(0x4000e000 as _);
-pub const TIM24: timer::Tim_gp16 = timer::Tim_gp16(0x4000e400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM23: timer::TimGp16 = timer::TimGp16(0x4000e000 as _);
+pub const TIM24: timer::TimGp16 = timer::TimGp16(0x4000e400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h742ag.rs b/embassy-stm32/src/pac/stm32h742ag.rs
index 456a94cb..5d346ec5 100644
--- a/embassy-stm32/src/pac/stm32h742ag.rs
+++ b/embassy-stm32/src/pac/stm32h742ag.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h742ai.rs b/embassy-stm32/src/pac/stm32h742ai.rs
index 456a94cb..5d346ec5 100644
--- a/embassy-stm32/src/pac/stm32h742ai.rs
+++ b/embassy-stm32/src/pac/stm32h742ai.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h742bg.rs b/embassy-stm32/src/pac/stm32h742bg.rs
index 456a94cb..5d346ec5 100644
--- a/embassy-stm32/src/pac/stm32h742bg.rs
+++ b/embassy-stm32/src/pac/stm32h742bg.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h742bi.rs b/embassy-stm32/src/pac/stm32h742bi.rs
index 456a94cb..5d346ec5 100644
--- a/embassy-stm32/src/pac/stm32h742bi.rs
+++ b/embassy-stm32/src/pac/stm32h742bi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h742ig.rs b/embassy-stm32/src/pac/stm32h742ig.rs
index 456a94cb..5d346ec5 100644
--- a/embassy-stm32/src/pac/stm32h742ig.rs
+++ b/embassy-stm32/src/pac/stm32h742ig.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h742ii.rs b/embassy-stm32/src/pac/stm32h742ii.rs
index 456a94cb..5d346ec5 100644
--- a/embassy-stm32/src/pac/stm32h742ii.rs
+++ b/embassy-stm32/src/pac/stm32h742ii.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h742vg.rs b/embassy-stm32/src/pac/stm32h742vg.rs
index 7f684aa6..d76e5ce7 100644
--- a/embassy-stm32/src/pac/stm32h742vg.rs
+++ b/embassy-stm32/src/pac/stm32h742vg.rs
@@ -293,20 +293,20 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h742vi.rs b/embassy-stm32/src/pac/stm32h742vi.rs
index 7f684aa6..d76e5ce7 100644
--- a/embassy-stm32/src/pac/stm32h742vi.rs
+++ b/embassy-stm32/src/pac/stm32h742vi.rs
@@ -293,20 +293,20 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h742xg.rs b/embassy-stm32/src/pac/stm32h742xg.rs
index 456a94cb..5d346ec5 100644
--- a/embassy-stm32/src/pac/stm32h742xg.rs
+++ b/embassy-stm32/src/pac/stm32h742xg.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h742xi.rs b/embassy-stm32/src/pac/stm32h742xi.rs
index 456a94cb..5d346ec5 100644
--- a/embassy-stm32/src/pac/stm32h742xi.rs
+++ b/embassy-stm32/src/pac/stm32h742xi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h742zg.rs b/embassy-stm32/src/pac/stm32h742zg.rs
index 456a94cb..5d346ec5 100644
--- a/embassy-stm32/src/pac/stm32h742zg.rs
+++ b/embassy-stm32/src/pac/stm32h742zg.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h742zi.rs b/embassy-stm32/src/pac/stm32h742zi.rs
index 456a94cb..5d346ec5 100644
--- a/embassy-stm32/src/pac/stm32h742zi.rs
+++ b/embassy-stm32/src/pac/stm32h742zi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h743ag.rs b/embassy-stm32/src/pac/stm32h743ag.rs
index ff0ce96d..9fe2ac31 100644
--- a/embassy-stm32/src/pac/stm32h743ag.rs
+++ b/embassy-stm32/src/pac/stm32h743ag.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h743ai.rs b/embassy-stm32/src/pac/stm32h743ai.rs
index ff0ce96d..9fe2ac31 100644
--- a/embassy-stm32/src/pac/stm32h743ai.rs
+++ b/embassy-stm32/src/pac/stm32h743ai.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h743bg.rs b/embassy-stm32/src/pac/stm32h743bg.rs
index ff0ce96d..9fe2ac31 100644
--- a/embassy-stm32/src/pac/stm32h743bg.rs
+++ b/embassy-stm32/src/pac/stm32h743bg.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h743bi.rs b/embassy-stm32/src/pac/stm32h743bi.rs
index ff0ce96d..9fe2ac31 100644
--- a/embassy-stm32/src/pac/stm32h743bi.rs
+++ b/embassy-stm32/src/pac/stm32h743bi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h743ig.rs b/embassy-stm32/src/pac/stm32h743ig.rs
index ff0ce96d..9fe2ac31 100644
--- a/embassy-stm32/src/pac/stm32h743ig.rs
+++ b/embassy-stm32/src/pac/stm32h743ig.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h743ii.rs b/embassy-stm32/src/pac/stm32h743ii.rs
index ff0ce96d..9fe2ac31 100644
--- a/embassy-stm32/src/pac/stm32h743ii.rs
+++ b/embassy-stm32/src/pac/stm32h743ii.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h743vg.rs b/embassy-stm32/src/pac/stm32h743vg.rs
index e181dd23..33eb0495 100644
--- a/embassy-stm32/src/pac/stm32h743vg.rs
+++ b/embassy-stm32/src/pac/stm32h743vg.rs
@@ -293,20 +293,20 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h743vi.rs b/embassy-stm32/src/pac/stm32h743vi.rs
index e181dd23..33eb0495 100644
--- a/embassy-stm32/src/pac/stm32h743vi.rs
+++ b/embassy-stm32/src/pac/stm32h743vi.rs
@@ -293,20 +293,20 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h743xg.rs b/embassy-stm32/src/pac/stm32h743xg.rs
index ff0ce96d..9fe2ac31 100644
--- a/embassy-stm32/src/pac/stm32h743xg.rs
+++ b/embassy-stm32/src/pac/stm32h743xg.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h743xi.rs b/embassy-stm32/src/pac/stm32h743xi.rs
index ff0ce96d..9fe2ac31 100644
--- a/embassy-stm32/src/pac/stm32h743xi.rs
+++ b/embassy-stm32/src/pac/stm32h743xi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h743zg.rs b/embassy-stm32/src/pac/stm32h743zg.rs
index ff0ce96d..9fe2ac31 100644
--- a/embassy-stm32/src/pac/stm32h743zg.rs
+++ b/embassy-stm32/src/pac/stm32h743zg.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h743zi.rs b/embassy-stm32/src/pac/stm32h743zi.rs
index ff0ce96d..9fe2ac31 100644
--- a/embassy-stm32/src/pac/stm32h743zi.rs
+++ b/embassy-stm32/src/pac/stm32h743zi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h745bg.rs b/embassy-stm32/src/pac/stm32h745bg.rs
index 21baa735..0046f7c8 100644
--- a/embassy-stm32/src/pac/stm32h745bg.rs
+++ b/embassy-stm32/src/pac/stm32h745bg.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h745bi.rs b/embassy-stm32/src/pac/stm32h745bi.rs
index 21baa735..0046f7c8 100644
--- a/embassy-stm32/src/pac/stm32h745bi.rs
+++ b/embassy-stm32/src/pac/stm32h745bi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h745ig.rs b/embassy-stm32/src/pac/stm32h745ig.rs
index 21baa735..0046f7c8 100644
--- a/embassy-stm32/src/pac/stm32h745ig.rs
+++ b/embassy-stm32/src/pac/stm32h745ig.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h745ii.rs b/embassy-stm32/src/pac/stm32h745ii.rs
index 21baa735..0046f7c8 100644
--- a/embassy-stm32/src/pac/stm32h745ii.rs
+++ b/embassy-stm32/src/pac/stm32h745ii.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h745xg.rs b/embassy-stm32/src/pac/stm32h745xg.rs
index 21baa735..0046f7c8 100644
--- a/embassy-stm32/src/pac/stm32h745xg.rs
+++ b/embassy-stm32/src/pac/stm32h745xg.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h745xi.rs b/embassy-stm32/src/pac/stm32h745xi.rs
index 21baa735..0046f7c8 100644
--- a/embassy-stm32/src/pac/stm32h745xi.rs
+++ b/embassy-stm32/src/pac/stm32h745xi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h745zg.rs b/embassy-stm32/src/pac/stm32h745zg.rs
index 21baa735..0046f7c8 100644
--- a/embassy-stm32/src/pac/stm32h745zg.rs
+++ b/embassy-stm32/src/pac/stm32h745zg.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h745zi.rs b/embassy-stm32/src/pac/stm32h745zi.rs
index 21baa735..0046f7c8 100644
--- a/embassy-stm32/src/pac/stm32h745zi.rs
+++ b/embassy-stm32/src/pac/stm32h745zi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h747ag.rs b/embassy-stm32/src/pac/stm32h747ag.rs
index 836d34bc..6aaf81d5 100644
--- a/embassy-stm32/src/pac/stm32h747ag.rs
+++ b/embassy-stm32/src/pac/stm32h747ag.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h747ai.rs b/embassy-stm32/src/pac/stm32h747ai.rs
index 836d34bc..6aaf81d5 100644
--- a/embassy-stm32/src/pac/stm32h747ai.rs
+++ b/embassy-stm32/src/pac/stm32h747ai.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h747bg.rs b/embassy-stm32/src/pac/stm32h747bg.rs
index 836d34bc..6aaf81d5 100644
--- a/embassy-stm32/src/pac/stm32h747bg.rs
+++ b/embassy-stm32/src/pac/stm32h747bg.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h747bi.rs b/embassy-stm32/src/pac/stm32h747bi.rs
index 836d34bc..6aaf81d5 100644
--- a/embassy-stm32/src/pac/stm32h747bi.rs
+++ b/embassy-stm32/src/pac/stm32h747bi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h747ig.rs b/embassy-stm32/src/pac/stm32h747ig.rs
index 836d34bc..6aaf81d5 100644
--- a/embassy-stm32/src/pac/stm32h747ig.rs
+++ b/embassy-stm32/src/pac/stm32h747ig.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h747ii.rs b/embassy-stm32/src/pac/stm32h747ii.rs
index 836d34bc..6aaf81d5 100644
--- a/embassy-stm32/src/pac/stm32h747ii.rs
+++ b/embassy-stm32/src/pac/stm32h747ii.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h747xg.rs b/embassy-stm32/src/pac/stm32h747xg.rs
index 836d34bc..6aaf81d5 100644
--- a/embassy-stm32/src/pac/stm32h747xg.rs
+++ b/embassy-stm32/src/pac/stm32h747xg.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h747xi.rs b/embassy-stm32/src/pac/stm32h747xi.rs
index 836d34bc..6aaf81d5 100644
--- a/embassy-stm32/src/pac/stm32h747xi.rs
+++ b/embassy-stm32/src/pac/stm32h747xi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h747zi.rs b/embassy-stm32/src/pac/stm32h747zi.rs
index 7eb311db..34b29684 100644
--- a/embassy-stm32/src/pac/stm32h747zi.rs
+++ b/embassy-stm32/src/pac/stm32h747zi.rs
@@ -293,20 +293,20 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h750ib.rs b/embassy-stm32/src/pac/stm32h750ib.rs
index 3841e0a0..b4b74d73 100644
--- a/embassy-stm32/src/pac/stm32h750ib.rs
+++ b/embassy-stm32/src/pac/stm32h750ib.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h750vb.rs b/embassy-stm32/src/pac/stm32h750vb.rs
index cc150b59..18abcb5d 100644
--- a/embassy-stm32/src/pac/stm32h750vb.rs
+++ b/embassy-stm32/src/pac/stm32h750vb.rs
@@ -293,20 +293,20 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h750xb.rs b/embassy-stm32/src/pac/stm32h750xb.rs
index 3841e0a0..b4b74d73 100644
--- a/embassy-stm32/src/pac/stm32h750xb.rs
+++ b/embassy-stm32/src/pac/stm32h750xb.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h750zb.rs b/embassy-stm32/src/pac/stm32h750zb.rs
index 3841e0a0..b4b74d73 100644
--- a/embassy-stm32/src/pac/stm32h750zb.rs
+++ b/embassy-stm32/src/pac/stm32h750zb.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h753ai.rs b/embassy-stm32/src/pac/stm32h753ai.rs
index 3841e0a0..b4b74d73 100644
--- a/embassy-stm32/src/pac/stm32h753ai.rs
+++ b/embassy-stm32/src/pac/stm32h753ai.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h753bi.rs b/embassy-stm32/src/pac/stm32h753bi.rs
index 3841e0a0..b4b74d73 100644
--- a/embassy-stm32/src/pac/stm32h753bi.rs
+++ b/embassy-stm32/src/pac/stm32h753bi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h753ii.rs b/embassy-stm32/src/pac/stm32h753ii.rs
index 3841e0a0..b4b74d73 100644
--- a/embassy-stm32/src/pac/stm32h753ii.rs
+++ b/embassy-stm32/src/pac/stm32h753ii.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h753vi.rs b/embassy-stm32/src/pac/stm32h753vi.rs
index cc150b59..18abcb5d 100644
--- a/embassy-stm32/src/pac/stm32h753vi.rs
+++ b/embassy-stm32/src/pac/stm32h753vi.rs
@@ -293,20 +293,20 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h753xi.rs b/embassy-stm32/src/pac/stm32h753xi.rs
index 3841e0a0..b4b74d73 100644
--- a/embassy-stm32/src/pac/stm32h753xi.rs
+++ b/embassy-stm32/src/pac/stm32h753xi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h753zi.rs b/embassy-stm32/src/pac/stm32h753zi.rs
index 3841e0a0..b4b74d73 100644
--- a/embassy-stm32/src/pac/stm32h753zi.rs
+++ b/embassy-stm32/src/pac/stm32h753zi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h755bi.rs b/embassy-stm32/src/pac/stm32h755bi.rs
index 0f318b34..43609a48 100644
--- a/embassy-stm32/src/pac/stm32h755bi.rs
+++ b/embassy-stm32/src/pac/stm32h755bi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h755ii.rs b/embassy-stm32/src/pac/stm32h755ii.rs
index 0f318b34..43609a48 100644
--- a/embassy-stm32/src/pac/stm32h755ii.rs
+++ b/embassy-stm32/src/pac/stm32h755ii.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h755xi.rs b/embassy-stm32/src/pac/stm32h755xi.rs
index 0f318b34..43609a48 100644
--- a/embassy-stm32/src/pac/stm32h755xi.rs
+++ b/embassy-stm32/src/pac/stm32h755xi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h755zi.rs b/embassy-stm32/src/pac/stm32h755zi.rs
index 0f318b34..43609a48 100644
--- a/embassy-stm32/src/pac/stm32h755zi.rs
+++ b/embassy-stm32/src/pac/stm32h755zi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h757ai.rs b/embassy-stm32/src/pac/stm32h757ai.rs
index b645ce26..8a66fdb8 100644
--- a/embassy-stm32/src/pac/stm32h757ai.rs
+++ b/embassy-stm32/src/pac/stm32h757ai.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h757bi.rs b/embassy-stm32/src/pac/stm32h757bi.rs
index b645ce26..8a66fdb8 100644
--- a/embassy-stm32/src/pac/stm32h757bi.rs
+++ b/embassy-stm32/src/pac/stm32h757bi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h757ii.rs b/embassy-stm32/src/pac/stm32h757ii.rs
index b645ce26..8a66fdb8 100644
--- a/embassy-stm32/src/pac/stm32h757ii.rs
+++ b/embassy-stm32/src/pac/stm32h757ii.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h757xi.rs b/embassy-stm32/src/pac/stm32h757xi.rs
index b645ce26..8a66fdb8 100644
--- a/embassy-stm32/src/pac/stm32h757xi.rs
+++ b/embassy-stm32/src/pac/stm32h757xi.rs
@@ -304,20 +304,20 @@ impl_spi_pin!(SPI5, MisoPin, PJ11, 5);
 impl_spi_pin!(SPI5, SckPin, PK0, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h757zi.rs b/embassy-stm32/src/pac/stm32h757zi.rs
index 73e59f4d..a63a12b7 100644
--- a/embassy-stm32/src/pac/stm32h757zi.rs
+++ b/embassy-stm32/src/pac/stm32h757zi.rs
@@ -293,20 +293,20 @@ impl_spi_pin!(SPI4, MisoPin, PE5, 5);
 impl_spi_pin!(SPI4, MosiPin, PE6, 5);
 pub const SPI6: spi::Spi = spi::Spi(0x58001400 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7a3ag.rs b/embassy-stm32/src/pac/stm32h7a3ag.rs
index 88d82787..84068029 100644
--- a/embassy-stm32/src/pac/stm32h7a3ag.rs
+++ b/embassy-stm32/src/pac/stm32h7a3ag.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7a3ai.rs b/embassy-stm32/src/pac/stm32h7a3ai.rs
index 88d82787..84068029 100644
--- a/embassy-stm32/src/pac/stm32h7a3ai.rs
+++ b/embassy-stm32/src/pac/stm32h7a3ai.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7a3ig.rs b/embassy-stm32/src/pac/stm32h7a3ig.rs
index 88d82787..84068029 100644
--- a/embassy-stm32/src/pac/stm32h7a3ig.rs
+++ b/embassy-stm32/src/pac/stm32h7a3ig.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7a3ii.rs b/embassy-stm32/src/pac/stm32h7a3ii.rs
index 88d82787..84068029 100644
--- a/embassy-stm32/src/pac/stm32h7a3ii.rs
+++ b/embassy-stm32/src/pac/stm32h7a3ii.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7a3lg.rs b/embassy-stm32/src/pac/stm32h7a3lg.rs
index 88d82787..84068029 100644
--- a/embassy-stm32/src/pac/stm32h7a3lg.rs
+++ b/embassy-stm32/src/pac/stm32h7a3lg.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7a3li.rs b/embassy-stm32/src/pac/stm32h7a3li.rs
index 88d82787..84068029 100644
--- a/embassy-stm32/src/pac/stm32h7a3li.rs
+++ b/embassy-stm32/src/pac/stm32h7a3li.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7a3ng.rs b/embassy-stm32/src/pac/stm32h7a3ng.rs
index 88d82787..84068029 100644
--- a/embassy-stm32/src/pac/stm32h7a3ng.rs
+++ b/embassy-stm32/src/pac/stm32h7a3ng.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7a3ni.rs b/embassy-stm32/src/pac/stm32h7a3ni.rs
index 88d82787..84068029 100644
--- a/embassy-stm32/src/pac/stm32h7a3ni.rs
+++ b/embassy-stm32/src/pac/stm32h7a3ni.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7a3qi.rs b/embassy-stm32/src/pac/stm32h7a3qi.rs
index 755fb5bc..f31b0bd7 100644
--- a/embassy-stm32/src/pac/stm32h7a3qi.rs
+++ b/embassy-stm32/src/pac/stm32h7a3qi.rs
@@ -310,20 +310,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7a3rg.rs b/embassy-stm32/src/pac/stm32h7a3rg.rs
index 91376f8f..1e44f955 100644
--- a/embassy-stm32/src/pac/stm32h7a3rg.rs
+++ b/embassy-stm32/src/pac/stm32h7a3rg.rs
@@ -301,20 +301,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7a3ri.rs b/embassy-stm32/src/pac/stm32h7a3ri.rs
index 91376f8f..1e44f955 100644
--- a/embassy-stm32/src/pac/stm32h7a3ri.rs
+++ b/embassy-stm32/src/pac/stm32h7a3ri.rs
@@ -301,20 +301,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7a3vg.rs b/embassy-stm32/src/pac/stm32h7a3vg.rs
index 755fb5bc..f31b0bd7 100644
--- a/embassy-stm32/src/pac/stm32h7a3vg.rs
+++ b/embassy-stm32/src/pac/stm32h7a3vg.rs
@@ -310,20 +310,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7a3vi.rs b/embassy-stm32/src/pac/stm32h7a3vi.rs
index 755fb5bc..f31b0bd7 100644
--- a/embassy-stm32/src/pac/stm32h7a3vi.rs
+++ b/embassy-stm32/src/pac/stm32h7a3vi.rs
@@ -310,20 +310,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7a3zg.rs b/embassy-stm32/src/pac/stm32h7a3zg.rs
index 88d82787..84068029 100644
--- a/embassy-stm32/src/pac/stm32h7a3zg.rs
+++ b/embassy-stm32/src/pac/stm32h7a3zg.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7a3zi.rs b/embassy-stm32/src/pac/stm32h7a3zi.rs
index 88d82787..84068029 100644
--- a/embassy-stm32/src/pac/stm32h7a3zi.rs
+++ b/embassy-stm32/src/pac/stm32h7a3zi.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7b0ab.rs b/embassy-stm32/src/pac/stm32h7b0ab.rs
index 2e7400b4..9c2bd127 100644
--- a/embassy-stm32/src/pac/stm32h7b0ab.rs
+++ b/embassy-stm32/src/pac/stm32h7b0ab.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7b0ib.rs b/embassy-stm32/src/pac/stm32h7b0ib.rs
index 2e7400b4..9c2bd127 100644
--- a/embassy-stm32/src/pac/stm32h7b0ib.rs
+++ b/embassy-stm32/src/pac/stm32h7b0ib.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7b0rb.rs b/embassy-stm32/src/pac/stm32h7b0rb.rs
index 1eb43a8c..e323f816 100644
--- a/embassy-stm32/src/pac/stm32h7b0rb.rs
+++ b/embassy-stm32/src/pac/stm32h7b0rb.rs
@@ -301,20 +301,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7b0vb.rs b/embassy-stm32/src/pac/stm32h7b0vb.rs
index a226fe7f..0fa2b45a 100644
--- a/embassy-stm32/src/pac/stm32h7b0vb.rs
+++ b/embassy-stm32/src/pac/stm32h7b0vb.rs
@@ -310,20 +310,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7b0zb.rs b/embassy-stm32/src/pac/stm32h7b0zb.rs
index 2e7400b4..9c2bd127 100644
--- a/embassy-stm32/src/pac/stm32h7b0zb.rs
+++ b/embassy-stm32/src/pac/stm32h7b0zb.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7b3ai.rs b/embassy-stm32/src/pac/stm32h7b3ai.rs
index 2e7400b4..9c2bd127 100644
--- a/embassy-stm32/src/pac/stm32h7b3ai.rs
+++ b/embassy-stm32/src/pac/stm32h7b3ai.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7b3ii.rs b/embassy-stm32/src/pac/stm32h7b3ii.rs
index 2e7400b4..9c2bd127 100644
--- a/embassy-stm32/src/pac/stm32h7b3ii.rs
+++ b/embassy-stm32/src/pac/stm32h7b3ii.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7b3li.rs b/embassy-stm32/src/pac/stm32h7b3li.rs
index 2e7400b4..9c2bd127 100644
--- a/embassy-stm32/src/pac/stm32h7b3li.rs
+++ b/embassy-stm32/src/pac/stm32h7b3li.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7b3ni.rs b/embassy-stm32/src/pac/stm32h7b3ni.rs
index 2e7400b4..9c2bd127 100644
--- a/embassy-stm32/src/pac/stm32h7b3ni.rs
+++ b/embassy-stm32/src/pac/stm32h7b3ni.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7b3qi.rs b/embassy-stm32/src/pac/stm32h7b3qi.rs
index a226fe7f..0fa2b45a 100644
--- a/embassy-stm32/src/pac/stm32h7b3qi.rs
+++ b/embassy-stm32/src/pac/stm32h7b3qi.rs
@@ -310,20 +310,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7b3ri.rs b/embassy-stm32/src/pac/stm32h7b3ri.rs
index 1eb43a8c..e323f816 100644
--- a/embassy-stm32/src/pac/stm32h7b3ri.rs
+++ b/embassy-stm32/src/pac/stm32h7b3ri.rs
@@ -301,20 +301,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7b3vi.rs b/embassy-stm32/src/pac/stm32h7b3vi.rs
index a226fe7f..0fa2b45a 100644
--- a/embassy-stm32/src/pac/stm32h7b3vi.rs
+++ b/embassy-stm32/src/pac/stm32h7b3vi.rs
@@ -310,20 +310,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32h7b3zi.rs b/embassy-stm32/src/pac/stm32h7b3zi.rs
index 2e7400b4..9c2bd127 100644
--- a/embassy-stm32/src/pac/stm32h7b3zi.rs
+++ b/embassy-stm32/src/pac/stm32h7b3zi.rs
@@ -321,20 +321,20 @@ impl_spi_pin!(SPI6, MisoPin, PG12, 5);
 impl_spi_pin!(SPI6, SckPin, PG13, 5);
 impl_spi_pin!(SPI6, MosiPin, PG14, 5);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x58000400 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40010000 as _);
-pub const TIM12: timer::Tim_gp16 = timer::Tim_gp16(0x40001800 as _);
-pub const TIM13: timer::Tim_gp16 = timer::Tim_gp16(0x40001c00 as _);
-pub const TIM14: timer::Tim_gp16 = timer::Tim_gp16(0x40002000 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40010400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40010000 as _);
+pub const TIM12: timer::TimGp16 = timer::TimGp16(0x40001800 as _);
+pub const TIM13: timer::TimGp16 = timer::TimGp16(0x40001c00 as _);
+pub const TIM14: timer::TimGp16 = timer::TimGp16(0x40002000 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40010400 as _);
 pub use super::regs::dbgmcu_h7 as dbgmcu;
 pub use super::regs::dma_v2 as dma;
 pub use super::regs::exti_v1 as exti;
diff --git a/embassy-stm32/src/pac/stm32l010c6.rs b/embassy-stm32/src/pac/stm32l010c6.rs
index 98bf7218..2de9ec66 100644
--- a/embassy-stm32/src/pac/stm32l010c6.rs
+++ b/embassy-stm32/src/pac/stm32l010c6.rs
@@ -85,8 +85,8 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l010f4.rs b/embassy-stm32/src/pac/stm32l010f4.rs
index 078cb2e4..8ea81b4e 100644
--- a/embassy-stm32/src/pac/stm32l010f4.rs
+++ b/embassy-stm32/src/pac/stm32l010f4.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l010k4.rs b/embassy-stm32/src/pac/stm32l010k4.rs
index 078cb2e4..8ea81b4e 100644
--- a/embassy-stm32/src/pac/stm32l010k4.rs
+++ b/embassy-stm32/src/pac/stm32l010k4.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l010k8.rs b/embassy-stm32/src/pac/stm32l010k8.rs
index a0e59141..555485c8 100644
--- a/embassy-stm32/src/pac/stm32l010k8.rs
+++ b/embassy-stm32/src/pac/stm32l010k8.rs
@@ -102,8 +102,8 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l010r8.rs b/embassy-stm32/src/pac/stm32l010r8.rs
index a0e59141..555485c8 100644
--- a/embassy-stm32/src/pac/stm32l010r8.rs
+++ b/embassy-stm32/src/pac/stm32l010r8.rs
@@ -102,8 +102,8 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l010rb.rs b/embassy-stm32/src/pac/stm32l010rb.rs
index 9a2bdeff..0c591c0a 100644
--- a/embassy-stm32/src/pac/stm32l010rb.rs
+++ b/embassy-stm32/src/pac/stm32l010rb.rs
@@ -119,9 +119,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l011d3.rs b/embassy-stm32/src/pac/stm32l011d3.rs
index 75db9b82..b944b6d1 100644
--- a/embassy-stm32/src/pac/stm32l011d3.rs
+++ b/embassy-stm32/src/pac/stm32l011d3.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l011d4.rs b/embassy-stm32/src/pac/stm32l011d4.rs
index 75db9b82..b944b6d1 100644
--- a/embassy-stm32/src/pac/stm32l011d4.rs
+++ b/embassy-stm32/src/pac/stm32l011d4.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l011e3.rs b/embassy-stm32/src/pac/stm32l011e3.rs
index 75db9b82..b944b6d1 100644
--- a/embassy-stm32/src/pac/stm32l011e3.rs
+++ b/embassy-stm32/src/pac/stm32l011e3.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l011e4.rs b/embassy-stm32/src/pac/stm32l011e4.rs
index 75db9b82..b944b6d1 100644
--- a/embassy-stm32/src/pac/stm32l011e4.rs
+++ b/embassy-stm32/src/pac/stm32l011e4.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l011f3.rs b/embassy-stm32/src/pac/stm32l011f3.rs
index 75db9b82..b944b6d1 100644
--- a/embassy-stm32/src/pac/stm32l011f3.rs
+++ b/embassy-stm32/src/pac/stm32l011f3.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l011f4.rs b/embassy-stm32/src/pac/stm32l011f4.rs
index 75db9b82..b944b6d1 100644
--- a/embassy-stm32/src/pac/stm32l011f4.rs
+++ b/embassy-stm32/src/pac/stm32l011f4.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l011g3.rs b/embassy-stm32/src/pac/stm32l011g3.rs
index 75db9b82..b944b6d1 100644
--- a/embassy-stm32/src/pac/stm32l011g3.rs
+++ b/embassy-stm32/src/pac/stm32l011g3.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l011g4.rs b/embassy-stm32/src/pac/stm32l011g4.rs
index 75db9b82..b944b6d1 100644
--- a/embassy-stm32/src/pac/stm32l011g4.rs
+++ b/embassy-stm32/src/pac/stm32l011g4.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l011k3.rs b/embassy-stm32/src/pac/stm32l011k3.rs
index 75db9b82..b944b6d1 100644
--- a/embassy-stm32/src/pac/stm32l011k3.rs
+++ b/embassy-stm32/src/pac/stm32l011k3.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l011k4.rs b/embassy-stm32/src/pac/stm32l011k4.rs
index 75db9b82..b944b6d1 100644
--- a/embassy-stm32/src/pac/stm32l011k4.rs
+++ b/embassy-stm32/src/pac/stm32l011k4.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l021d4.rs b/embassy-stm32/src/pac/stm32l021d4.rs
index dca3597d..96050273 100644
--- a/embassy-stm32/src/pac/stm32l021d4.rs
+++ b/embassy-stm32/src/pac/stm32l021d4.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l021f4.rs b/embassy-stm32/src/pac/stm32l021f4.rs
index dca3597d..96050273 100644
--- a/embassy-stm32/src/pac/stm32l021f4.rs
+++ b/embassy-stm32/src/pac/stm32l021f4.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l021g4.rs b/embassy-stm32/src/pac/stm32l021g4.rs
index dca3597d..96050273 100644
--- a/embassy-stm32/src/pac/stm32l021g4.rs
+++ b/embassy-stm32/src/pac/stm32l021g4.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l021k4.rs b/embassy-stm32/src/pac/stm32l021k4.rs
index dca3597d..96050273 100644
--- a/embassy-stm32/src/pac/stm32l021k4.rs
+++ b/embassy-stm32/src/pac/stm32l021k4.rs
@@ -68,8 +68,8 @@ impl_gpio_pin!(PC14, 2, 14, EXTI14);
 impl_gpio_pin!(PC15, 2, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l031c4.rs b/embassy-stm32/src/pac/stm32l031c4.rs
index a7c9d0ba..d070eb34 100644
--- a/embassy-stm32/src/pac/stm32l031c4.rs
+++ b/embassy-stm32/src/pac/stm32l031c4.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l031c6.rs b/embassy-stm32/src/pac/stm32l031c6.rs
index a7c9d0ba..d070eb34 100644
--- a/embassy-stm32/src/pac/stm32l031c6.rs
+++ b/embassy-stm32/src/pac/stm32l031c6.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l031e4.rs b/embassy-stm32/src/pac/stm32l031e4.rs
index a7c9d0ba..d070eb34 100644
--- a/embassy-stm32/src/pac/stm32l031e4.rs
+++ b/embassy-stm32/src/pac/stm32l031e4.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l031e6.rs b/embassy-stm32/src/pac/stm32l031e6.rs
index a7c9d0ba..d070eb34 100644
--- a/embassy-stm32/src/pac/stm32l031e6.rs
+++ b/embassy-stm32/src/pac/stm32l031e6.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l031f4.rs b/embassy-stm32/src/pac/stm32l031f4.rs
index a7c9d0ba..d070eb34 100644
--- a/embassy-stm32/src/pac/stm32l031f4.rs
+++ b/embassy-stm32/src/pac/stm32l031f4.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l031f6.rs b/embassy-stm32/src/pac/stm32l031f6.rs
index a7c9d0ba..d070eb34 100644
--- a/embassy-stm32/src/pac/stm32l031f6.rs
+++ b/embassy-stm32/src/pac/stm32l031f6.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l031g4.rs b/embassy-stm32/src/pac/stm32l031g4.rs
index a7c9d0ba..d070eb34 100644
--- a/embassy-stm32/src/pac/stm32l031g4.rs
+++ b/embassy-stm32/src/pac/stm32l031g4.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l031g6.rs b/embassy-stm32/src/pac/stm32l031g6.rs
index a7c9d0ba..d070eb34 100644
--- a/embassy-stm32/src/pac/stm32l031g6.rs
+++ b/embassy-stm32/src/pac/stm32l031g6.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l031k4.rs b/embassy-stm32/src/pac/stm32l031k4.rs
index a7c9d0ba..d070eb34 100644
--- a/embassy-stm32/src/pac/stm32l031k4.rs
+++ b/embassy-stm32/src/pac/stm32l031k4.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l031k6.rs b/embassy-stm32/src/pac/stm32l031k6.rs
index a7c9d0ba..d070eb34 100644
--- a/embassy-stm32/src/pac/stm32l031k6.rs
+++ b/embassy-stm32/src/pac/stm32l031k6.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l041c4.rs b/embassy-stm32/src/pac/stm32l041c4.rs
index e01af0c7..c505a3c6 100644
--- a/embassy-stm32/src/pac/stm32l041c4.rs
+++ b/embassy-stm32/src/pac/stm32l041c4.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l041c6.rs b/embassy-stm32/src/pac/stm32l041c6.rs
index e01af0c7..c505a3c6 100644
--- a/embassy-stm32/src/pac/stm32l041c6.rs
+++ b/embassy-stm32/src/pac/stm32l041c6.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l041e6.rs b/embassy-stm32/src/pac/stm32l041e6.rs
index e01af0c7..c505a3c6 100644
--- a/embassy-stm32/src/pac/stm32l041e6.rs
+++ b/embassy-stm32/src/pac/stm32l041e6.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l041f6.rs b/embassy-stm32/src/pac/stm32l041f6.rs
index e01af0c7..c505a3c6 100644
--- a/embassy-stm32/src/pac/stm32l041f6.rs
+++ b/embassy-stm32/src/pac/stm32l041f6.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l041g6.rs b/embassy-stm32/src/pac/stm32l041g6.rs
index e01af0c7..c505a3c6 100644
--- a/embassy-stm32/src/pac/stm32l041g6.rs
+++ b/embassy-stm32/src/pac/stm32l041g6.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l041k6.rs b/embassy-stm32/src/pac/stm32l041k6.rs
index e01af0c7..c505a3c6 100644
--- a/embassy-stm32/src/pac/stm32l041k6.rs
+++ b/embassy-stm32/src/pac/stm32l041k6.rs
@@ -85,9 +85,9 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
 pub const USART2: usart::Usart = usart::Usart(0x40004400 as _);
 impl_usart!(USART2);
 impl_usart_pin!(USART2, CtsPin, PA0, 4);
diff --git a/embassy-stm32/src/pac/stm32l051c6.rs b/embassy-stm32/src/pac/stm32l051c6.rs
index e4c273ed..9fdbc2c8 100644
--- a/embassy-stm32/src/pac/stm32l051c6.rs
+++ b/embassy-stm32/src/pac/stm32l051c6.rs
@@ -102,10 +102,10 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l051c8.rs b/embassy-stm32/src/pac/stm32l051c8.rs
index e4c273ed..9fdbc2c8 100644
--- a/embassy-stm32/src/pac/stm32l051c8.rs
+++ b/embassy-stm32/src/pac/stm32l051c8.rs
@@ -102,10 +102,10 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l051k6.rs b/embassy-stm32/src/pac/stm32l051k6.rs
index e4c273ed..9fdbc2c8 100644
--- a/embassy-stm32/src/pac/stm32l051k6.rs
+++ b/embassy-stm32/src/pac/stm32l051k6.rs
@@ -102,10 +102,10 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l051k8.rs b/embassy-stm32/src/pac/stm32l051k8.rs
index e4c273ed..9fdbc2c8 100644
--- a/embassy-stm32/src/pac/stm32l051k8.rs
+++ b/embassy-stm32/src/pac/stm32l051k8.rs
@@ -102,10 +102,10 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l051r6.rs b/embassy-stm32/src/pac/stm32l051r6.rs
index e4c273ed..9fdbc2c8 100644
--- a/embassy-stm32/src/pac/stm32l051r6.rs
+++ b/embassy-stm32/src/pac/stm32l051r6.rs
@@ -102,10 +102,10 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l051r8.rs b/embassy-stm32/src/pac/stm32l051r8.rs
index e4c273ed..9fdbc2c8 100644
--- a/embassy-stm32/src/pac/stm32l051r8.rs
+++ b/embassy-stm32/src/pac/stm32l051r8.rs
@@ -102,10 +102,10 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l051t6.rs b/embassy-stm32/src/pac/stm32l051t6.rs
index e4c273ed..9fdbc2c8 100644
--- a/embassy-stm32/src/pac/stm32l051t6.rs
+++ b/embassy-stm32/src/pac/stm32l051t6.rs
@@ -102,10 +102,10 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l051t8.rs b/embassy-stm32/src/pac/stm32l051t8.rs
index e4c273ed..9fdbc2c8 100644
--- a/embassy-stm32/src/pac/stm32l051t8.rs
+++ b/embassy-stm32/src/pac/stm32l051t8.rs
@@ -102,10 +102,10 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l052c6.rs b/embassy-stm32/src/pac/stm32l052c6.rs
index 3c8d2a6a..e55ac1e9 100644
--- a/embassy-stm32/src/pac/stm32l052c6.rs
+++ b/embassy-stm32/src/pac/stm32l052c6.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l052c8.rs b/embassy-stm32/src/pac/stm32l052c8.rs
index 3c8d2a6a..e55ac1e9 100644
--- a/embassy-stm32/src/pac/stm32l052c8.rs
+++ b/embassy-stm32/src/pac/stm32l052c8.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l052k6.rs b/embassy-stm32/src/pac/stm32l052k6.rs
index 3c8d2a6a..e55ac1e9 100644
--- a/embassy-stm32/src/pac/stm32l052k6.rs
+++ b/embassy-stm32/src/pac/stm32l052k6.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l052k8.rs b/embassy-stm32/src/pac/stm32l052k8.rs
index 3c8d2a6a..e55ac1e9 100644
--- a/embassy-stm32/src/pac/stm32l052k8.rs
+++ b/embassy-stm32/src/pac/stm32l052k8.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l052r6.rs b/embassy-stm32/src/pac/stm32l052r6.rs
index 3c8d2a6a..e55ac1e9 100644
--- a/embassy-stm32/src/pac/stm32l052r6.rs
+++ b/embassy-stm32/src/pac/stm32l052r6.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l052r8.rs b/embassy-stm32/src/pac/stm32l052r8.rs
index 3c8d2a6a..e55ac1e9 100644
--- a/embassy-stm32/src/pac/stm32l052r8.rs
+++ b/embassy-stm32/src/pac/stm32l052r8.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l052t6.rs b/embassy-stm32/src/pac/stm32l052t6.rs
index 3c8d2a6a..e55ac1e9 100644
--- a/embassy-stm32/src/pac/stm32l052t6.rs
+++ b/embassy-stm32/src/pac/stm32l052t6.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l052t8.rs b/embassy-stm32/src/pac/stm32l052t8.rs
index 3c8d2a6a..e55ac1e9 100644
--- a/embassy-stm32/src/pac/stm32l052t8.rs
+++ b/embassy-stm32/src/pac/stm32l052t8.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l053c6.rs b/embassy-stm32/src/pac/stm32l053c6.rs
index bcfea502..3e505b02 100644
--- a/embassy-stm32/src/pac/stm32l053c6.rs
+++ b/embassy-stm32/src/pac/stm32l053c6.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l053c8.rs b/embassy-stm32/src/pac/stm32l053c8.rs
index bcfea502..3e505b02 100644
--- a/embassy-stm32/src/pac/stm32l053c8.rs
+++ b/embassy-stm32/src/pac/stm32l053c8.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l053r6.rs b/embassy-stm32/src/pac/stm32l053r6.rs
index bcfea502..3e505b02 100644
--- a/embassy-stm32/src/pac/stm32l053r6.rs
+++ b/embassy-stm32/src/pac/stm32l053r6.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l053r8.rs b/embassy-stm32/src/pac/stm32l053r8.rs
index bcfea502..3e505b02 100644
--- a/embassy-stm32/src/pac/stm32l053r8.rs
+++ b/embassy-stm32/src/pac/stm32l053r8.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l062c8.rs b/embassy-stm32/src/pac/stm32l062c8.rs
index 371b50c4..8e8a1b6c 100644
--- a/embassy-stm32/src/pac/stm32l062c8.rs
+++ b/embassy-stm32/src/pac/stm32l062c8.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, AES_RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l062k8.rs b/embassy-stm32/src/pac/stm32l062k8.rs
index 371b50c4..8e8a1b6c 100644
--- a/embassy-stm32/src/pac/stm32l062k8.rs
+++ b/embassy-stm32/src/pac/stm32l062k8.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, AES_RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l063c8.rs b/embassy-stm32/src/pac/stm32l063c8.rs
index 511b1d4b..6d62f31d 100644
--- a/embassy-stm32/src/pac/stm32l063c8.rs
+++ b/embassy-stm32/src/pac/stm32l063c8.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, AES_RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l063r8.rs b/embassy-stm32/src/pac/stm32l063r8.rs
index 511b1d4b..6d62f31d 100644
--- a/embassy-stm32/src/pac/stm32l063r8.rs
+++ b/embassy-stm32/src/pac/stm32l063r8.rs
@@ -104,10 +104,10 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, AES_RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l071c8.rs b/embassy-stm32/src/pac/stm32l071c8.rs
index ef09c081..81106041 100644
--- a/embassy-stm32/src/pac/stm32l071c8.rs
+++ b/embassy-stm32/src/pac/stm32l071c8.rs
@@ -119,12 +119,12 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l071cb.rs b/embassy-stm32/src/pac/stm32l071cb.rs
index ef09c081..81106041 100644
--- a/embassy-stm32/src/pac/stm32l071cb.rs
+++ b/embassy-stm32/src/pac/stm32l071cb.rs
@@ -119,12 +119,12 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l071cz.rs b/embassy-stm32/src/pac/stm32l071cz.rs
index ef09c081..81106041 100644
--- a/embassy-stm32/src/pac/stm32l071cz.rs
+++ b/embassy-stm32/src/pac/stm32l071cz.rs
@@ -119,12 +119,12 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l071k8.rs b/embassy-stm32/src/pac/stm32l071k8.rs
index e3245b64..504f13af 100644
--- a/embassy-stm32/src/pac/stm32l071k8.rs
+++ b/embassy-stm32/src/pac/stm32l071k8.rs
@@ -119,12 +119,12 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l071kb.rs b/embassy-stm32/src/pac/stm32l071kb.rs
index ef09c081..81106041 100644
--- a/embassy-stm32/src/pac/stm32l071kb.rs
+++ b/embassy-stm32/src/pac/stm32l071kb.rs
@@ -119,12 +119,12 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l071kz.rs b/embassy-stm32/src/pac/stm32l071kz.rs
index ef09c081..81106041 100644
--- a/embassy-stm32/src/pac/stm32l071kz.rs
+++ b/embassy-stm32/src/pac/stm32l071kz.rs
@@ -119,12 +119,12 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l071rb.rs b/embassy-stm32/src/pac/stm32l071rb.rs
index ef09c081..81106041 100644
--- a/embassy-stm32/src/pac/stm32l071rb.rs
+++ b/embassy-stm32/src/pac/stm32l071rb.rs
@@ -119,12 +119,12 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l071rz.rs b/embassy-stm32/src/pac/stm32l071rz.rs
index ef09c081..81106041 100644
--- a/embassy-stm32/src/pac/stm32l071rz.rs
+++ b/embassy-stm32/src/pac/stm32l071rz.rs
@@ -119,12 +119,12 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l071v8.rs b/embassy-stm32/src/pac/stm32l071v8.rs
index ef09c081..81106041 100644
--- a/embassy-stm32/src/pac/stm32l071v8.rs
+++ b/embassy-stm32/src/pac/stm32l071v8.rs
@@ -119,12 +119,12 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l071vb.rs b/embassy-stm32/src/pac/stm32l071vb.rs
index ef09c081..81106041 100644
--- a/embassy-stm32/src/pac/stm32l071vb.rs
+++ b/embassy-stm32/src/pac/stm32l071vb.rs
@@ -119,12 +119,12 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l071vz.rs b/embassy-stm32/src/pac/stm32l071vz.rs
index ef09c081..81106041 100644
--- a/embassy-stm32/src/pac/stm32l071vz.rs
+++ b/embassy-stm32/src/pac/stm32l071vz.rs
@@ -119,12 +119,12 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l072cb.rs b/embassy-stm32/src/pac/stm32l072cb.rs
index aeb87bfb..b9d53465 100644
--- a/embassy-stm32/src/pac/stm32l072cb.rs
+++ b/embassy-stm32/src/pac/stm32l072cb.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l072cz.rs b/embassy-stm32/src/pac/stm32l072cz.rs
index aeb87bfb..b9d53465 100644
--- a/embassy-stm32/src/pac/stm32l072cz.rs
+++ b/embassy-stm32/src/pac/stm32l072cz.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l072kb.rs b/embassy-stm32/src/pac/stm32l072kb.rs
index aeb87bfb..b9d53465 100644
--- a/embassy-stm32/src/pac/stm32l072kb.rs
+++ b/embassy-stm32/src/pac/stm32l072kb.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l072kz.rs b/embassy-stm32/src/pac/stm32l072kz.rs
index aeb87bfb..b9d53465 100644
--- a/embassy-stm32/src/pac/stm32l072kz.rs
+++ b/embassy-stm32/src/pac/stm32l072kz.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l072rb.rs b/embassy-stm32/src/pac/stm32l072rb.rs
index aeb87bfb..b9d53465 100644
--- a/embassy-stm32/src/pac/stm32l072rb.rs
+++ b/embassy-stm32/src/pac/stm32l072rb.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l072rz.rs b/embassy-stm32/src/pac/stm32l072rz.rs
index aeb87bfb..b9d53465 100644
--- a/embassy-stm32/src/pac/stm32l072rz.rs
+++ b/embassy-stm32/src/pac/stm32l072rz.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l072v8.rs b/embassy-stm32/src/pac/stm32l072v8.rs
index aeb87bfb..b9d53465 100644
--- a/embassy-stm32/src/pac/stm32l072v8.rs
+++ b/embassy-stm32/src/pac/stm32l072v8.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l072vb.rs b/embassy-stm32/src/pac/stm32l072vb.rs
index aeb87bfb..b9d53465 100644
--- a/embassy-stm32/src/pac/stm32l072vb.rs
+++ b/embassy-stm32/src/pac/stm32l072vb.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l072vz.rs b/embassy-stm32/src/pac/stm32l072vz.rs
index aeb87bfb..b9d53465 100644
--- a/embassy-stm32/src/pac/stm32l072vz.rs
+++ b/embassy-stm32/src/pac/stm32l072vz.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l073cb.rs b/embassy-stm32/src/pac/stm32l073cb.rs
index b3b4cf34..25b11f15 100644
--- a/embassy-stm32/src/pac/stm32l073cb.rs
+++ b/embassy-stm32/src/pac/stm32l073cb.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l073cz.rs b/embassy-stm32/src/pac/stm32l073cz.rs
index b3b4cf34..25b11f15 100644
--- a/embassy-stm32/src/pac/stm32l073cz.rs
+++ b/embassy-stm32/src/pac/stm32l073cz.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l073rb.rs b/embassy-stm32/src/pac/stm32l073rb.rs
index b3b4cf34..25b11f15 100644
--- a/embassy-stm32/src/pac/stm32l073rb.rs
+++ b/embassy-stm32/src/pac/stm32l073rb.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l073rz.rs b/embassy-stm32/src/pac/stm32l073rz.rs
index b3b4cf34..25b11f15 100644
--- a/embassy-stm32/src/pac/stm32l073rz.rs
+++ b/embassy-stm32/src/pac/stm32l073rz.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l073v8.rs b/embassy-stm32/src/pac/stm32l073v8.rs
index b3b4cf34..25b11f15 100644
--- a/embassy-stm32/src/pac/stm32l073v8.rs
+++ b/embassy-stm32/src/pac/stm32l073v8.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l073vb.rs b/embassy-stm32/src/pac/stm32l073vb.rs
index b3b4cf34..25b11f15 100644
--- a/embassy-stm32/src/pac/stm32l073vb.rs
+++ b/embassy-stm32/src/pac/stm32l073vb.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l073vz.rs b/embassy-stm32/src/pac/stm32l073vz.rs
index b3b4cf34..25b11f15 100644
--- a/embassy-stm32/src/pac/stm32l073vz.rs
+++ b/embassy-stm32/src/pac/stm32l073vz.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l081cb.rs b/embassy-stm32/src/pac/stm32l081cb.rs
index a62dc5b4..a7c14d8f 100644
--- a/embassy-stm32/src/pac/stm32l081cb.rs
+++ b/embassy-stm32/src/pac/stm32l081cb.rs
@@ -119,12 +119,12 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l081cz.rs b/embassy-stm32/src/pac/stm32l081cz.rs
index a62dc5b4..a7c14d8f 100644
--- a/embassy-stm32/src/pac/stm32l081cz.rs
+++ b/embassy-stm32/src/pac/stm32l081cz.rs
@@ -119,12 +119,12 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l081kz.rs b/embassy-stm32/src/pac/stm32l081kz.rs
index a62dc5b4..a7c14d8f 100644
--- a/embassy-stm32/src/pac/stm32l081kz.rs
+++ b/embassy-stm32/src/pac/stm32l081kz.rs
@@ -119,12 +119,12 @@ impl_gpio_pin!(PH14, 7, 14, EXTI14);
 impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l082cz.rs b/embassy-stm32/src/pac/stm32l082cz.rs
index bf0d7120..3684dc3c 100644
--- a/embassy-stm32/src/pac/stm32l082cz.rs
+++ b/embassy-stm32/src/pac/stm32l082cz.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, AES_RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l082kb.rs b/embassy-stm32/src/pac/stm32l082kb.rs
index bf0d7120..3684dc3c 100644
--- a/embassy-stm32/src/pac/stm32l082kb.rs
+++ b/embassy-stm32/src/pac/stm32l082kb.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, AES_RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l082kz.rs b/embassy-stm32/src/pac/stm32l082kz.rs
index bf0d7120..3684dc3c 100644
--- a/embassy-stm32/src/pac/stm32l082kz.rs
+++ b/embassy-stm32/src/pac/stm32l082kz.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, AES_RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l083cb.rs b/embassy-stm32/src/pac/stm32l083cb.rs
index 41466f94..533bfb65 100644
--- a/embassy-stm32/src/pac/stm32l083cb.rs
+++ b/embassy-stm32/src/pac/stm32l083cb.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, AES_RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l083cz.rs b/embassy-stm32/src/pac/stm32l083cz.rs
index 41466f94..533bfb65 100644
--- a/embassy-stm32/src/pac/stm32l083cz.rs
+++ b/embassy-stm32/src/pac/stm32l083cz.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, AES_RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l083rb.rs b/embassy-stm32/src/pac/stm32l083rb.rs
index 41466f94..533bfb65 100644
--- a/embassy-stm32/src/pac/stm32l083rb.rs
+++ b/embassy-stm32/src/pac/stm32l083rb.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, AES_RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l083rz.rs b/embassy-stm32/src/pac/stm32l083rz.rs
index 41466f94..533bfb65 100644
--- a/embassy-stm32/src/pac/stm32l083rz.rs
+++ b/embassy-stm32/src/pac/stm32l083rz.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, AES_RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l083v8.rs b/embassy-stm32/src/pac/stm32l083v8.rs
index 41466f94..533bfb65 100644
--- a/embassy-stm32/src/pac/stm32l083v8.rs
+++ b/embassy-stm32/src/pac/stm32l083v8.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, AES_RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l083vb.rs b/embassy-stm32/src/pac/stm32l083vb.rs
index 41466f94..533bfb65 100644
--- a/embassy-stm32/src/pac/stm32l083vb.rs
+++ b/embassy-stm32/src/pac/stm32l083vb.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, AES_RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l083vz.rs b/embassy-stm32/src/pac/stm32l083vz.rs
index 41466f94..533bfb65 100644
--- a/embassy-stm32/src/pac/stm32l083vz.rs
+++ b/embassy-stm32/src/pac/stm32l083vz.rs
@@ -121,12 +121,12 @@ pub const RCC: rcc::Rcc = rcc::Rcc(0x40021000 as _);
 pub const RNG: rng::Rng = rng::Rng(0x40025000 as _);
 impl_rng!(RNG, AES_RNG_LPUART1);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM21: timer::Tim_gp16 = timer::Tim_gp16(0x40010800 as _);
-pub const TIM22: timer::Tim_gp16 = timer::Tim_gp16(0x40011400 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM21: timer::TimGp16 = timer::TimGp16(0x40010800 as _);
+pub const TIM22: timer::TimGp16 = timer::TimGp16(0x40011400 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 4);
diff --git a/embassy-stm32/src/pac/stm32l412c8.rs b/embassy-stm32/src/pac/stm32l412c8.rs
index 857dc928..bf67a1d6 100644
--- a/embassy-stm32/src/pac/stm32l412c8.rs
+++ b/embassy-stm32/src/pac/stm32l412c8.rs
@@ -112,11 +112,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l412cb.rs b/embassy-stm32/src/pac/stm32l412cb.rs
index 857dc928..bf67a1d6 100644
--- a/embassy-stm32/src/pac/stm32l412cb.rs
+++ b/embassy-stm32/src/pac/stm32l412cb.rs
@@ -112,11 +112,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l412k8.rs b/embassy-stm32/src/pac/stm32l412k8.rs
index fa5fee18..28b67bb6 100644
--- a/embassy-stm32/src/pac/stm32l412k8.rs
+++ b/embassy-stm32/src/pac/stm32l412k8.rs
@@ -112,11 +112,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l412kb.rs b/embassy-stm32/src/pac/stm32l412kb.rs
index fa5fee18..28b67bb6 100644
--- a/embassy-stm32/src/pac/stm32l412kb.rs
+++ b/embassy-stm32/src/pac/stm32l412kb.rs
@@ -112,11 +112,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l412r8.rs b/embassy-stm32/src/pac/stm32l412r8.rs
index 857dc928..bf67a1d6 100644
--- a/embassy-stm32/src/pac/stm32l412r8.rs
+++ b/embassy-stm32/src/pac/stm32l412r8.rs
@@ -112,11 +112,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l412rb.rs b/embassy-stm32/src/pac/stm32l412rb.rs
index 857dc928..bf67a1d6 100644
--- a/embassy-stm32/src/pac/stm32l412rb.rs
+++ b/embassy-stm32/src/pac/stm32l412rb.rs
@@ -112,11 +112,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l412t8.rs b/embassy-stm32/src/pac/stm32l412t8.rs
index fa5fee18..28b67bb6 100644
--- a/embassy-stm32/src/pac/stm32l412t8.rs
+++ b/embassy-stm32/src/pac/stm32l412t8.rs
@@ -112,11 +112,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l412tb.rs b/embassy-stm32/src/pac/stm32l412tb.rs
index fa5fee18..28b67bb6 100644
--- a/embassy-stm32/src/pac/stm32l412tb.rs
+++ b/embassy-stm32/src/pac/stm32l412tb.rs
@@ -112,11 +112,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l422cb.rs b/embassy-stm32/src/pac/stm32l422cb.rs
index 6d93bda8..3ea0d809 100644
--- a/embassy-stm32/src/pac/stm32l422cb.rs
+++ b/embassy-stm32/src/pac/stm32l422cb.rs
@@ -112,11 +112,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l422kb.rs b/embassy-stm32/src/pac/stm32l422kb.rs
index 1f873e72..a0d343d5 100644
--- a/embassy-stm32/src/pac/stm32l422kb.rs
+++ b/embassy-stm32/src/pac/stm32l422kb.rs
@@ -112,11 +112,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l422rb.rs b/embassy-stm32/src/pac/stm32l422rb.rs
index 6d93bda8..3ea0d809 100644
--- a/embassy-stm32/src/pac/stm32l422rb.rs
+++ b/embassy-stm32/src/pac/stm32l422rb.rs
@@ -112,11 +112,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l422tb.rs b/embassy-stm32/src/pac/stm32l422tb.rs
index 1f873e72..a0d343d5 100644
--- a/embassy-stm32/src/pac/stm32l422tb.rs
+++ b/embassy-stm32/src/pac/stm32l422tb.rs
@@ -112,11 +112,11 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l431cb.rs b/embassy-stm32/src/pac/stm32l431cb.rs
index 16d890fd..6e586525 100644
--- a/embassy-stm32/src/pac/stm32l431cb.rs
+++ b/embassy-stm32/src/pac/stm32l431cb.rs
@@ -162,12 +162,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l431cc.rs b/embassy-stm32/src/pac/stm32l431cc.rs
index 16d890fd..6e586525 100644
--- a/embassy-stm32/src/pac/stm32l431cc.rs
+++ b/embassy-stm32/src/pac/stm32l431cc.rs
@@ -162,12 +162,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l431kb.rs b/embassy-stm32/src/pac/stm32l431kb.rs
index ee8ad2f0..d1fe0d06 100644
--- a/embassy-stm32/src/pac/stm32l431kb.rs
+++ b/embassy-stm32/src/pac/stm32l431kb.rs
@@ -151,12 +151,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l431kc.rs b/embassy-stm32/src/pac/stm32l431kc.rs
index ee8ad2f0..d1fe0d06 100644
--- a/embassy-stm32/src/pac/stm32l431kc.rs
+++ b/embassy-stm32/src/pac/stm32l431kc.rs
@@ -151,12 +151,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l431rb.rs b/embassy-stm32/src/pac/stm32l431rb.rs
index 16d890fd..6e586525 100644
--- a/embassy-stm32/src/pac/stm32l431rb.rs
+++ b/embassy-stm32/src/pac/stm32l431rb.rs
@@ -162,12 +162,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l431rc.rs b/embassy-stm32/src/pac/stm32l431rc.rs
index 16d890fd..6e586525 100644
--- a/embassy-stm32/src/pac/stm32l431rc.rs
+++ b/embassy-stm32/src/pac/stm32l431rc.rs
@@ -162,12 +162,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l431vc.rs b/embassy-stm32/src/pac/stm32l431vc.rs
index 16d890fd..6e586525 100644
--- a/embassy-stm32/src/pac/stm32l431vc.rs
+++ b/embassy-stm32/src/pac/stm32l431vc.rs
@@ -162,12 +162,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l432kb.rs b/embassy-stm32/src/pac/stm32l432kb.rs
index 20b44715..2d7310cf 100644
--- a/embassy-stm32/src/pac/stm32l432kb.rs
+++ b/embassy-stm32/src/pac/stm32l432kb.rs
@@ -114,12 +114,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l432kc.rs b/embassy-stm32/src/pac/stm32l432kc.rs
index 20b44715..2d7310cf 100644
--- a/embassy-stm32/src/pac/stm32l432kc.rs
+++ b/embassy-stm32/src/pac/stm32l432kc.rs
@@ -114,12 +114,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l433cb.rs b/embassy-stm32/src/pac/stm32l433cb.rs
index d349166f..96394b96 100644
--- a/embassy-stm32/src/pac/stm32l433cb.rs
+++ b/embassy-stm32/src/pac/stm32l433cb.rs
@@ -162,12 +162,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l433cc.rs b/embassy-stm32/src/pac/stm32l433cc.rs
index d349166f..96394b96 100644
--- a/embassy-stm32/src/pac/stm32l433cc.rs
+++ b/embassy-stm32/src/pac/stm32l433cc.rs
@@ -162,12 +162,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l433rb.rs b/embassy-stm32/src/pac/stm32l433rb.rs
index d349166f..96394b96 100644
--- a/embassy-stm32/src/pac/stm32l433rb.rs
+++ b/embassy-stm32/src/pac/stm32l433rb.rs
@@ -162,12 +162,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l433rc.rs b/embassy-stm32/src/pac/stm32l433rc.rs
index d349166f..96394b96 100644
--- a/embassy-stm32/src/pac/stm32l433rc.rs
+++ b/embassy-stm32/src/pac/stm32l433rc.rs
@@ -162,12 +162,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l433vc.rs b/embassy-stm32/src/pac/stm32l433vc.rs
index d349166f..96394b96 100644
--- a/embassy-stm32/src/pac/stm32l433vc.rs
+++ b/embassy-stm32/src/pac/stm32l433vc.rs
@@ -162,12 +162,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l442kc.rs b/embassy-stm32/src/pac/stm32l442kc.rs
index c6decbcb..52b41cc2 100644
--- a/embassy-stm32/src/pac/stm32l442kc.rs
+++ b/embassy-stm32/src/pac/stm32l442kc.rs
@@ -114,12 +114,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l443cc.rs b/embassy-stm32/src/pac/stm32l443cc.rs
index 524dc89f..d0afc1d4 100644
--- a/embassy-stm32/src/pac/stm32l443cc.rs
+++ b/embassy-stm32/src/pac/stm32l443cc.rs
@@ -162,12 +162,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l443rc.rs b/embassy-stm32/src/pac/stm32l443rc.rs
index 524dc89f..d0afc1d4 100644
--- a/embassy-stm32/src/pac/stm32l443rc.rs
+++ b/embassy-stm32/src/pac/stm32l443rc.rs
@@ -162,12 +162,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l443vc.rs b/embassy-stm32/src/pac/stm32l443vc.rs
index 524dc89f..d0afc1d4 100644
--- a/embassy-stm32/src/pac/stm32l443vc.rs
+++ b/embassy-stm32/src/pac/stm32l443vc.rs
@@ -162,12 +162,12 @@ impl_spi_pin!(SPI3, SckPin, PC10, 6);
 impl_spi_pin!(SPI3, MisoPin, PC11, 6);
 impl_spi_pin!(SPI3, MosiPin, PC12, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l451cc.rs b/embassy-stm32/src/pac/stm32l451cc.rs
index afa3ff55..6a417b52 100644
--- a/embassy-stm32/src/pac/stm32l451cc.rs
+++ b/embassy-stm32/src/pac/stm32l451cc.rs
@@ -129,12 +129,12 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l451ce.rs b/embassy-stm32/src/pac/stm32l451ce.rs
index afa3ff55..6a417b52 100644
--- a/embassy-stm32/src/pac/stm32l451ce.rs
+++ b/embassy-stm32/src/pac/stm32l451ce.rs
@@ -129,12 +129,12 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l451rc.rs b/embassy-stm32/src/pac/stm32l451rc.rs
index afa3ff55..6a417b52 100644
--- a/embassy-stm32/src/pac/stm32l451rc.rs
+++ b/embassy-stm32/src/pac/stm32l451rc.rs
@@ -129,12 +129,12 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l451re.rs b/embassy-stm32/src/pac/stm32l451re.rs
index afa3ff55..6a417b52 100644
--- a/embassy-stm32/src/pac/stm32l451re.rs
+++ b/embassy-stm32/src/pac/stm32l451re.rs
@@ -129,12 +129,12 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l451vc.rs b/embassy-stm32/src/pac/stm32l451vc.rs
index afa3ff55..6a417b52 100644
--- a/embassy-stm32/src/pac/stm32l451vc.rs
+++ b/embassy-stm32/src/pac/stm32l451vc.rs
@@ -129,12 +129,12 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l451ve.rs b/embassy-stm32/src/pac/stm32l451ve.rs
index afa3ff55..6a417b52 100644
--- a/embassy-stm32/src/pac/stm32l451ve.rs
+++ b/embassy-stm32/src/pac/stm32l451ve.rs
@@ -129,12 +129,12 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l452cc.rs b/embassy-stm32/src/pac/stm32l452cc.rs
index 0c225463..03d0cab2 100644
--- a/embassy-stm32/src/pac/stm32l452cc.rs
+++ b/embassy-stm32/src/pac/stm32l452cc.rs
@@ -129,12 +129,12 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l452ce.rs b/embassy-stm32/src/pac/stm32l452ce.rs
index 0c225463..03d0cab2 100644
--- a/embassy-stm32/src/pac/stm32l452ce.rs
+++ b/embassy-stm32/src/pac/stm32l452ce.rs
@@ -129,12 +129,12 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l452rc.rs b/embassy-stm32/src/pac/stm32l452rc.rs
index 0c225463..03d0cab2 100644
--- a/embassy-stm32/src/pac/stm32l452rc.rs
+++ b/embassy-stm32/src/pac/stm32l452rc.rs
@@ -129,12 +129,12 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l452re.rs b/embassy-stm32/src/pac/stm32l452re.rs
index 0c225463..03d0cab2 100644
--- a/embassy-stm32/src/pac/stm32l452re.rs
+++ b/embassy-stm32/src/pac/stm32l452re.rs
@@ -129,12 +129,12 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l452vc.rs b/embassy-stm32/src/pac/stm32l452vc.rs
index 0c225463..03d0cab2 100644
--- a/embassy-stm32/src/pac/stm32l452vc.rs
+++ b/embassy-stm32/src/pac/stm32l452vc.rs
@@ -129,12 +129,12 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l452ve.rs b/embassy-stm32/src/pac/stm32l452ve.rs
index 0c225463..03d0cab2 100644
--- a/embassy-stm32/src/pac/stm32l452ve.rs
+++ b/embassy-stm32/src/pac/stm32l452ve.rs
@@ -129,12 +129,12 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l462ce.rs b/embassy-stm32/src/pac/stm32l462ce.rs
index 00469cdb..1e207754 100644
--- a/embassy-stm32/src/pac/stm32l462ce.rs
+++ b/embassy-stm32/src/pac/stm32l462ce.rs
@@ -129,12 +129,12 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l462re.rs b/embassy-stm32/src/pac/stm32l462re.rs
index 00469cdb..1e207754 100644
--- a/embassy-stm32/src/pac/stm32l462re.rs
+++ b/embassy-stm32/src/pac/stm32l462re.rs
@@ -129,12 +129,12 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l462ve.rs b/embassy-stm32/src/pac/stm32l462ve.rs
index 00469cdb..1e207754 100644
--- a/embassy-stm32/src/pac/stm32l462ve.rs
+++ b/embassy-stm32/src/pac/stm32l462ve.rs
@@ -129,12 +129,12 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l471qe.rs b/embassy-stm32/src/pac/stm32l471qe.rs
index 96c4f100..f171d99e 100644
--- a/embassy-stm32/src/pac/stm32l471qe.rs
+++ b/embassy-stm32/src/pac/stm32l471qe.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l471qg.rs b/embassy-stm32/src/pac/stm32l471qg.rs
index 96c4f100..f171d99e 100644
--- a/embassy-stm32/src/pac/stm32l471qg.rs
+++ b/embassy-stm32/src/pac/stm32l471qg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l471re.rs b/embassy-stm32/src/pac/stm32l471re.rs
index 96c4f100..f171d99e 100644
--- a/embassy-stm32/src/pac/stm32l471re.rs
+++ b/embassy-stm32/src/pac/stm32l471re.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l471rg.rs b/embassy-stm32/src/pac/stm32l471rg.rs
index 96c4f100..f171d99e 100644
--- a/embassy-stm32/src/pac/stm32l471rg.rs
+++ b/embassy-stm32/src/pac/stm32l471rg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l471ve.rs b/embassy-stm32/src/pac/stm32l471ve.rs
index 96c4f100..f171d99e 100644
--- a/embassy-stm32/src/pac/stm32l471ve.rs
+++ b/embassy-stm32/src/pac/stm32l471ve.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l471vg.rs b/embassy-stm32/src/pac/stm32l471vg.rs
index 96c4f100..f171d99e 100644
--- a/embassy-stm32/src/pac/stm32l471vg.rs
+++ b/embassy-stm32/src/pac/stm32l471vg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l471ze.rs b/embassy-stm32/src/pac/stm32l471ze.rs
index 96c4f100..f171d99e 100644
--- a/embassy-stm32/src/pac/stm32l471ze.rs
+++ b/embassy-stm32/src/pac/stm32l471ze.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l471zg.rs b/embassy-stm32/src/pac/stm32l471zg.rs
index 96c4f100..f171d99e 100644
--- a/embassy-stm32/src/pac/stm32l471zg.rs
+++ b/embassy-stm32/src/pac/stm32l471zg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l475rc.rs b/embassy-stm32/src/pac/stm32l475rc.rs
index 85bff804..9b939a28 100644
--- a/embassy-stm32/src/pac/stm32l475rc.rs
+++ b/embassy-stm32/src/pac/stm32l475rc.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l475re.rs b/embassy-stm32/src/pac/stm32l475re.rs
index 85bff804..9b939a28 100644
--- a/embassy-stm32/src/pac/stm32l475re.rs
+++ b/embassy-stm32/src/pac/stm32l475re.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l475rg.rs b/embassy-stm32/src/pac/stm32l475rg.rs
index 85bff804..9b939a28 100644
--- a/embassy-stm32/src/pac/stm32l475rg.rs
+++ b/embassy-stm32/src/pac/stm32l475rg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l475vc.rs b/embassy-stm32/src/pac/stm32l475vc.rs
index 85bff804..9b939a28 100644
--- a/embassy-stm32/src/pac/stm32l475vc.rs
+++ b/embassy-stm32/src/pac/stm32l475vc.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l475ve.rs b/embassy-stm32/src/pac/stm32l475ve.rs
index 85bff804..9b939a28 100644
--- a/embassy-stm32/src/pac/stm32l475ve.rs
+++ b/embassy-stm32/src/pac/stm32l475ve.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l475vg.rs b/embassy-stm32/src/pac/stm32l475vg.rs
index 85bff804..9b939a28 100644
--- a/embassy-stm32/src/pac/stm32l475vg.rs
+++ b/embassy-stm32/src/pac/stm32l475vg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l476je.rs b/embassy-stm32/src/pac/stm32l476je.rs
index e9e0e201..e16e6958 100644
--- a/embassy-stm32/src/pac/stm32l476je.rs
+++ b/embassy-stm32/src/pac/stm32l476je.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l476jg.rs b/embassy-stm32/src/pac/stm32l476jg.rs
index e9e0e201..e16e6958 100644
--- a/embassy-stm32/src/pac/stm32l476jg.rs
+++ b/embassy-stm32/src/pac/stm32l476jg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l476me.rs b/embassy-stm32/src/pac/stm32l476me.rs
index e9e0e201..e16e6958 100644
--- a/embassy-stm32/src/pac/stm32l476me.rs
+++ b/embassy-stm32/src/pac/stm32l476me.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l476mg.rs b/embassy-stm32/src/pac/stm32l476mg.rs
index e9e0e201..e16e6958 100644
--- a/embassy-stm32/src/pac/stm32l476mg.rs
+++ b/embassy-stm32/src/pac/stm32l476mg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l476qe.rs b/embassy-stm32/src/pac/stm32l476qe.rs
index e9e0e201..e16e6958 100644
--- a/embassy-stm32/src/pac/stm32l476qe.rs
+++ b/embassy-stm32/src/pac/stm32l476qe.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l476qg.rs b/embassy-stm32/src/pac/stm32l476qg.rs
index e9e0e201..e16e6958 100644
--- a/embassy-stm32/src/pac/stm32l476qg.rs
+++ b/embassy-stm32/src/pac/stm32l476qg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l476rc.rs b/embassy-stm32/src/pac/stm32l476rc.rs
index e9e0e201..e16e6958 100644
--- a/embassy-stm32/src/pac/stm32l476rc.rs
+++ b/embassy-stm32/src/pac/stm32l476rc.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l476re.rs b/embassy-stm32/src/pac/stm32l476re.rs
index e9e0e201..e16e6958 100644
--- a/embassy-stm32/src/pac/stm32l476re.rs
+++ b/embassy-stm32/src/pac/stm32l476re.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l476rg.rs b/embassy-stm32/src/pac/stm32l476rg.rs
index e9e0e201..e16e6958 100644
--- a/embassy-stm32/src/pac/stm32l476rg.rs
+++ b/embassy-stm32/src/pac/stm32l476rg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l476vc.rs b/embassy-stm32/src/pac/stm32l476vc.rs
index e9e0e201..e16e6958 100644
--- a/embassy-stm32/src/pac/stm32l476vc.rs
+++ b/embassy-stm32/src/pac/stm32l476vc.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l476ve.rs b/embassy-stm32/src/pac/stm32l476ve.rs
index e9e0e201..e16e6958 100644
--- a/embassy-stm32/src/pac/stm32l476ve.rs
+++ b/embassy-stm32/src/pac/stm32l476ve.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l476vg.rs b/embassy-stm32/src/pac/stm32l476vg.rs
index e9e0e201..e16e6958 100644
--- a/embassy-stm32/src/pac/stm32l476vg.rs
+++ b/embassy-stm32/src/pac/stm32l476vg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l476ze.rs b/embassy-stm32/src/pac/stm32l476ze.rs
index e9e0e201..e16e6958 100644
--- a/embassy-stm32/src/pac/stm32l476ze.rs
+++ b/embassy-stm32/src/pac/stm32l476ze.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l476zg.rs b/embassy-stm32/src/pac/stm32l476zg.rs
index e9e0e201..e16e6958 100644
--- a/embassy-stm32/src/pac/stm32l476zg.rs
+++ b/embassy-stm32/src/pac/stm32l476zg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l485jc.rs b/embassy-stm32/src/pac/stm32l485jc.rs
index 0bd47429..ded29d55 100644
--- a/embassy-stm32/src/pac/stm32l485jc.rs
+++ b/embassy-stm32/src/pac/stm32l485jc.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l485je.rs b/embassy-stm32/src/pac/stm32l485je.rs
index 0bd47429..ded29d55 100644
--- a/embassy-stm32/src/pac/stm32l485je.rs
+++ b/embassy-stm32/src/pac/stm32l485je.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l486jg.rs b/embassy-stm32/src/pac/stm32l486jg.rs
index fb0f3f73..203b2bb7 100644
--- a/embassy-stm32/src/pac/stm32l486jg.rs
+++ b/embassy-stm32/src/pac/stm32l486jg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l486qg.rs b/embassy-stm32/src/pac/stm32l486qg.rs
index fb0f3f73..203b2bb7 100644
--- a/embassy-stm32/src/pac/stm32l486qg.rs
+++ b/embassy-stm32/src/pac/stm32l486qg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l486rg.rs b/embassy-stm32/src/pac/stm32l486rg.rs
index fb0f3f73..203b2bb7 100644
--- a/embassy-stm32/src/pac/stm32l486rg.rs
+++ b/embassy-stm32/src/pac/stm32l486rg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l486vg.rs b/embassy-stm32/src/pac/stm32l486vg.rs
index fb0f3f73..203b2bb7 100644
--- a/embassy-stm32/src/pac/stm32l486vg.rs
+++ b/embassy-stm32/src/pac/stm32l486vg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l486zg.rs b/embassy-stm32/src/pac/stm32l486zg.rs
index fb0f3f73..203b2bb7 100644
--- a/embassy-stm32/src/pac/stm32l486zg.rs
+++ b/embassy-stm32/src/pac/stm32l486zg.rs
@@ -163,17 +163,17 @@ impl_gpio_pin!(PH15, 7, 15, EXTI15);
 pub const RNG: rng::Rng = rng::Rng(0x50060800 as _);
 impl_rng!(RNG, RNG);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l496ae.rs b/embassy-stm32/src/pac/stm32l496ae.rs
index 04398757..f659db6d 100644
--- a/embassy-stm32/src/pac/stm32l496ae.rs
+++ b/embassy-stm32/src/pac/stm32l496ae.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l496ag.rs b/embassy-stm32/src/pac/stm32l496ag.rs
index 04398757..f659db6d 100644
--- a/embassy-stm32/src/pac/stm32l496ag.rs
+++ b/embassy-stm32/src/pac/stm32l496ag.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l496qe.rs b/embassy-stm32/src/pac/stm32l496qe.rs
index 04398757..f659db6d 100644
--- a/embassy-stm32/src/pac/stm32l496qe.rs
+++ b/embassy-stm32/src/pac/stm32l496qe.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l496qg.rs b/embassy-stm32/src/pac/stm32l496qg.rs
index 04398757..f659db6d 100644
--- a/embassy-stm32/src/pac/stm32l496qg.rs
+++ b/embassy-stm32/src/pac/stm32l496qg.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l496re.rs b/embassy-stm32/src/pac/stm32l496re.rs
index 04398757..f659db6d 100644
--- a/embassy-stm32/src/pac/stm32l496re.rs
+++ b/embassy-stm32/src/pac/stm32l496re.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l496rg.rs b/embassy-stm32/src/pac/stm32l496rg.rs
index 04398757..f659db6d 100644
--- a/embassy-stm32/src/pac/stm32l496rg.rs
+++ b/embassy-stm32/src/pac/stm32l496rg.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l496ve.rs b/embassy-stm32/src/pac/stm32l496ve.rs
index 04398757..f659db6d 100644
--- a/embassy-stm32/src/pac/stm32l496ve.rs
+++ b/embassy-stm32/src/pac/stm32l496ve.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l496vg.rs b/embassy-stm32/src/pac/stm32l496vg.rs
index 04398757..f659db6d 100644
--- a/embassy-stm32/src/pac/stm32l496vg.rs
+++ b/embassy-stm32/src/pac/stm32l496vg.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l496wg.rs b/embassy-stm32/src/pac/stm32l496wg.rs
index 04398757..f659db6d 100644
--- a/embassy-stm32/src/pac/stm32l496wg.rs
+++ b/embassy-stm32/src/pac/stm32l496wg.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l496ze.rs b/embassy-stm32/src/pac/stm32l496ze.rs
index 04398757..f659db6d 100644
--- a/embassy-stm32/src/pac/stm32l496ze.rs
+++ b/embassy-stm32/src/pac/stm32l496ze.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l496zg.rs b/embassy-stm32/src/pac/stm32l496zg.rs
index 04398757..f659db6d 100644
--- a/embassy-stm32/src/pac/stm32l496zg.rs
+++ b/embassy-stm32/src/pac/stm32l496zg.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l4a6ag.rs b/embassy-stm32/src/pac/stm32l4a6ag.rs
index 44f3d855..d6c79ee3 100644
--- a/embassy-stm32/src/pac/stm32l4a6ag.rs
+++ b/embassy-stm32/src/pac/stm32l4a6ag.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l4a6qg.rs b/embassy-stm32/src/pac/stm32l4a6qg.rs
index 44f3d855..d6c79ee3 100644
--- a/embassy-stm32/src/pac/stm32l4a6qg.rs
+++ b/embassy-stm32/src/pac/stm32l4a6qg.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l4a6rg.rs b/embassy-stm32/src/pac/stm32l4a6rg.rs
index 44f3d855..d6c79ee3 100644
--- a/embassy-stm32/src/pac/stm32l4a6rg.rs
+++ b/embassy-stm32/src/pac/stm32l4a6rg.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l4a6vg.rs b/embassy-stm32/src/pac/stm32l4a6vg.rs
index 44f3d855..d6c79ee3 100644
--- a/embassy-stm32/src/pac/stm32l4a6vg.rs
+++ b/embassy-stm32/src/pac/stm32l4a6vg.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l4a6zg.rs b/embassy-stm32/src/pac/stm32l4a6zg.rs
index 44f3d855..d6c79ee3 100644
--- a/embassy-stm32/src/pac/stm32l4a6zg.rs
+++ b/embassy-stm32/src/pac/stm32l4a6zg.rs
@@ -225,17 +225,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub const USART1: usart::Usart = usart::Usart(0x40013800 as _);
 impl_usart!(USART1);
 impl_usart_pin!(USART1, RxPin, PA10, 7);
diff --git a/embassy-stm32/src/pac/stm32l4p5ae.rs b/embassy-stm32/src/pac/stm32l4p5ae.rs
index 4b4b2ab1..a51beb95 100644
--- a/embassy-stm32/src/pac/stm32l4p5ae.rs
+++ b/embassy-stm32/src/pac/stm32l4p5ae.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4p5ag.rs b/embassy-stm32/src/pac/stm32l4p5ag.rs
index 4b4b2ab1..a51beb95 100644
--- a/embassy-stm32/src/pac/stm32l4p5ag.rs
+++ b/embassy-stm32/src/pac/stm32l4p5ag.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4p5ce.rs b/embassy-stm32/src/pac/stm32l4p5ce.rs
index 4b4b2ab1..a51beb95 100644
--- a/embassy-stm32/src/pac/stm32l4p5ce.rs
+++ b/embassy-stm32/src/pac/stm32l4p5ce.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4p5cg.rs b/embassy-stm32/src/pac/stm32l4p5cg.rs
index 4b4b2ab1..a51beb95 100644
--- a/embassy-stm32/src/pac/stm32l4p5cg.rs
+++ b/embassy-stm32/src/pac/stm32l4p5cg.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4p5qe.rs b/embassy-stm32/src/pac/stm32l4p5qe.rs
index 4b4b2ab1..a51beb95 100644
--- a/embassy-stm32/src/pac/stm32l4p5qe.rs
+++ b/embassy-stm32/src/pac/stm32l4p5qe.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4p5qg.rs b/embassy-stm32/src/pac/stm32l4p5qg.rs
index 4b4b2ab1..a51beb95 100644
--- a/embassy-stm32/src/pac/stm32l4p5qg.rs
+++ b/embassy-stm32/src/pac/stm32l4p5qg.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4p5re.rs b/embassy-stm32/src/pac/stm32l4p5re.rs
index 4b4b2ab1..a51beb95 100644
--- a/embassy-stm32/src/pac/stm32l4p5re.rs
+++ b/embassy-stm32/src/pac/stm32l4p5re.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4p5rg.rs b/embassy-stm32/src/pac/stm32l4p5rg.rs
index 4b4b2ab1..a51beb95 100644
--- a/embassy-stm32/src/pac/stm32l4p5rg.rs
+++ b/embassy-stm32/src/pac/stm32l4p5rg.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4p5ve.rs b/embassy-stm32/src/pac/stm32l4p5ve.rs
index 4b4b2ab1..a51beb95 100644
--- a/embassy-stm32/src/pac/stm32l4p5ve.rs
+++ b/embassy-stm32/src/pac/stm32l4p5ve.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4p5vg.rs b/embassy-stm32/src/pac/stm32l4p5vg.rs
index 4b4b2ab1..a51beb95 100644
--- a/embassy-stm32/src/pac/stm32l4p5vg.rs
+++ b/embassy-stm32/src/pac/stm32l4p5vg.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4p5ze.rs b/embassy-stm32/src/pac/stm32l4p5ze.rs
index 4b4b2ab1..a51beb95 100644
--- a/embassy-stm32/src/pac/stm32l4p5ze.rs
+++ b/embassy-stm32/src/pac/stm32l4p5ze.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4p5zg.rs b/embassy-stm32/src/pac/stm32l4p5zg.rs
index 4b4b2ab1..a51beb95 100644
--- a/embassy-stm32/src/pac/stm32l4p5zg.rs
+++ b/embassy-stm32/src/pac/stm32l4p5zg.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4q5ag.rs b/embassy-stm32/src/pac/stm32l4q5ag.rs
index b94a3883..1c673c33 100644
--- a/embassy-stm32/src/pac/stm32l4q5ag.rs
+++ b/embassy-stm32/src/pac/stm32l4q5ag.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4q5cg.rs b/embassy-stm32/src/pac/stm32l4q5cg.rs
index b94a3883..1c673c33 100644
--- a/embassy-stm32/src/pac/stm32l4q5cg.rs
+++ b/embassy-stm32/src/pac/stm32l4q5cg.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4q5qg.rs b/embassy-stm32/src/pac/stm32l4q5qg.rs
index b94a3883..1c673c33 100644
--- a/embassy-stm32/src/pac/stm32l4q5qg.rs
+++ b/embassy-stm32/src/pac/stm32l4q5qg.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4q5rg.rs b/embassy-stm32/src/pac/stm32l4q5rg.rs
index b94a3883..1c673c33 100644
--- a/embassy-stm32/src/pac/stm32l4q5rg.rs
+++ b/embassy-stm32/src/pac/stm32l4q5rg.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4q5vg.rs b/embassy-stm32/src/pac/stm32l4q5vg.rs
index b94a3883..1c673c33 100644
--- a/embassy-stm32/src/pac/stm32l4q5vg.rs
+++ b/embassy-stm32/src/pac/stm32l4q5vg.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4q5zg.rs b/embassy-stm32/src/pac/stm32l4q5zg.rs
index b94a3883..1c673c33 100644
--- a/embassy-stm32/src/pac/stm32l4q5zg.rs
+++ b/embassy-stm32/src/pac/stm32l4q5zg.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r5ag.rs b/embassy-stm32/src/pac/stm32l4r5ag.rs
index 38616f42..c9aa447b 100644
--- a/embassy-stm32/src/pac/stm32l4r5ag.rs
+++ b/embassy-stm32/src/pac/stm32l4r5ag.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r5ai.rs b/embassy-stm32/src/pac/stm32l4r5ai.rs
index 38616f42..c9aa447b 100644
--- a/embassy-stm32/src/pac/stm32l4r5ai.rs
+++ b/embassy-stm32/src/pac/stm32l4r5ai.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r5qg.rs b/embassy-stm32/src/pac/stm32l4r5qg.rs
index 38616f42..c9aa447b 100644
--- a/embassy-stm32/src/pac/stm32l4r5qg.rs
+++ b/embassy-stm32/src/pac/stm32l4r5qg.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r5qi.rs b/embassy-stm32/src/pac/stm32l4r5qi.rs
index 38616f42..c9aa447b 100644
--- a/embassy-stm32/src/pac/stm32l4r5qi.rs
+++ b/embassy-stm32/src/pac/stm32l4r5qi.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r5vg.rs b/embassy-stm32/src/pac/stm32l4r5vg.rs
index 38616f42..c9aa447b 100644
--- a/embassy-stm32/src/pac/stm32l4r5vg.rs
+++ b/embassy-stm32/src/pac/stm32l4r5vg.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r5vi.rs b/embassy-stm32/src/pac/stm32l4r5vi.rs
index 38616f42..c9aa447b 100644
--- a/embassy-stm32/src/pac/stm32l4r5vi.rs
+++ b/embassy-stm32/src/pac/stm32l4r5vi.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r5zg.rs b/embassy-stm32/src/pac/stm32l4r5zg.rs
index 38616f42..c9aa447b 100644
--- a/embassy-stm32/src/pac/stm32l4r5zg.rs
+++ b/embassy-stm32/src/pac/stm32l4r5zg.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r5zi.rs b/embassy-stm32/src/pac/stm32l4r5zi.rs
index 38616f42..c9aa447b 100644
--- a/embassy-stm32/src/pac/stm32l4r5zi.rs
+++ b/embassy-stm32/src/pac/stm32l4r5zi.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r7ai.rs b/embassy-stm32/src/pac/stm32l4r7ai.rs
index 2aa99881..a53b7786 100644
--- a/embassy-stm32/src/pac/stm32l4r7ai.rs
+++ b/embassy-stm32/src/pac/stm32l4r7ai.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r7vi.rs b/embassy-stm32/src/pac/stm32l4r7vi.rs
index 2aa99881..a53b7786 100644
--- a/embassy-stm32/src/pac/stm32l4r7vi.rs
+++ b/embassy-stm32/src/pac/stm32l4r7vi.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r7zi.rs b/embassy-stm32/src/pac/stm32l4r7zi.rs
index 2aa99881..a53b7786 100644
--- a/embassy-stm32/src/pac/stm32l4r7zi.rs
+++ b/embassy-stm32/src/pac/stm32l4r7zi.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r9ag.rs b/embassy-stm32/src/pac/stm32l4r9ag.rs
index d3b33aed..8a58b8bb 100644
--- a/embassy-stm32/src/pac/stm32l4r9ag.rs
+++ b/embassy-stm32/src/pac/stm32l4r9ag.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r9ai.rs b/embassy-stm32/src/pac/stm32l4r9ai.rs
index d3b33aed..8a58b8bb 100644
--- a/embassy-stm32/src/pac/stm32l4r9ai.rs
+++ b/embassy-stm32/src/pac/stm32l4r9ai.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r9vg.rs b/embassy-stm32/src/pac/stm32l4r9vg.rs
index d3b33aed..8a58b8bb 100644
--- a/embassy-stm32/src/pac/stm32l4r9vg.rs
+++ b/embassy-stm32/src/pac/stm32l4r9vg.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r9vi.rs b/embassy-stm32/src/pac/stm32l4r9vi.rs
index d3b33aed..8a58b8bb 100644
--- a/embassy-stm32/src/pac/stm32l4r9vi.rs
+++ b/embassy-stm32/src/pac/stm32l4r9vi.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r9zg.rs b/embassy-stm32/src/pac/stm32l4r9zg.rs
index d3b33aed..8a58b8bb 100644
--- a/embassy-stm32/src/pac/stm32l4r9zg.rs
+++ b/embassy-stm32/src/pac/stm32l4r9zg.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4r9zi.rs b/embassy-stm32/src/pac/stm32l4r9zi.rs
index d3b33aed..8a58b8bb 100644
--- a/embassy-stm32/src/pac/stm32l4r9zi.rs
+++ b/embassy-stm32/src/pac/stm32l4r9zi.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4s5ai.rs b/embassy-stm32/src/pac/stm32l4s5ai.rs
index 4bf3c6ad..54f890c7 100644
--- a/embassy-stm32/src/pac/stm32l4s5ai.rs
+++ b/embassy-stm32/src/pac/stm32l4s5ai.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4s5qi.rs b/embassy-stm32/src/pac/stm32l4s5qi.rs
index 4bf3c6ad..54f890c7 100644
--- a/embassy-stm32/src/pac/stm32l4s5qi.rs
+++ b/embassy-stm32/src/pac/stm32l4s5qi.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4s5vi.rs b/embassy-stm32/src/pac/stm32l4s5vi.rs
index 4bf3c6ad..54f890c7 100644
--- a/embassy-stm32/src/pac/stm32l4s5vi.rs
+++ b/embassy-stm32/src/pac/stm32l4s5vi.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4s5zi.rs b/embassy-stm32/src/pac/stm32l4s5zi.rs
index 4bf3c6ad..54f890c7 100644
--- a/embassy-stm32/src/pac/stm32l4s5zi.rs
+++ b/embassy-stm32/src/pac/stm32l4s5zi.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4s7ai.rs b/embassy-stm32/src/pac/stm32l4s7ai.rs
index 01416875..8a4d962b 100644
--- a/embassy-stm32/src/pac/stm32l4s7ai.rs
+++ b/embassy-stm32/src/pac/stm32l4s7ai.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4s7vi.rs b/embassy-stm32/src/pac/stm32l4s7vi.rs
index 01416875..8a4d962b 100644
--- a/embassy-stm32/src/pac/stm32l4s7vi.rs
+++ b/embassy-stm32/src/pac/stm32l4s7vi.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4s7zi.rs b/embassy-stm32/src/pac/stm32l4s7zi.rs
index 01416875..8a4d962b 100644
--- a/embassy-stm32/src/pac/stm32l4s7zi.rs
+++ b/embassy-stm32/src/pac/stm32l4s7zi.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4s9ai.rs b/embassy-stm32/src/pac/stm32l4s9ai.rs
index d9e6bd3d..14b880e1 100644
--- a/embassy-stm32/src/pac/stm32l4s9ai.rs
+++ b/embassy-stm32/src/pac/stm32l4s9ai.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4s9vi.rs b/embassy-stm32/src/pac/stm32l4s9vi.rs
index d9e6bd3d..14b880e1 100644
--- a/embassy-stm32/src/pac/stm32l4s9vi.rs
+++ b/embassy-stm32/src/pac/stm32l4s9vi.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;
diff --git a/embassy-stm32/src/pac/stm32l4s9zi.rs b/embassy-stm32/src/pac/stm32l4s9zi.rs
index d9e6bd3d..14b880e1 100644
--- a/embassy-stm32/src/pac/stm32l4s9zi.rs
+++ b/embassy-stm32/src/pac/stm32l4s9zi.rs
@@ -226,17 +226,17 @@ impl_spi_pin!(SPI3, MisoPin, PG10, 6);
 impl_spi_pin!(SPI3, MosiPin, PG11, 6);
 impl_spi_pin!(SPI3, SckPin, PG9, 6);
 pub const SYSCFG: syscfg::Syscfg = syscfg::Syscfg(0x40010000 as _);
-pub const TIM1: timer::Tim_gp16 = timer::Tim_gp16(0x40012c00 as _);
-pub const TIM15: timer::Tim_gp16 = timer::Tim_gp16(0x40014000 as _);
-pub const TIM16: timer::Tim_gp16 = timer::Tim_gp16(0x40014400 as _);
-pub const TIM17: timer::Tim_gp16 = timer::Tim_gp16(0x40014800 as _);
-pub const TIM2: timer::Tim_gp16 = timer::Tim_gp16(0x40000000 as _);
-pub const TIM3: timer::Tim_gp16 = timer::Tim_gp16(0x40000400 as _);
-pub const TIM4: timer::Tim_gp16 = timer::Tim_gp16(0x40000800 as _);
-pub const TIM5: timer::Tim_gp16 = timer::Tim_gp16(0x40000c00 as _);
-pub const TIM6: timer::Tim_gp16 = timer::Tim_gp16(0x40001000 as _);
-pub const TIM7: timer::Tim_gp16 = timer::Tim_gp16(0x40001400 as _);
-pub const TIM8: timer::Tim_gp16 = timer::Tim_gp16(0x40013400 as _);
+pub const TIM1: timer::TimGp16 = timer::TimGp16(0x40012c00 as _);
+pub const TIM15: timer::TimGp16 = timer::TimGp16(0x40014000 as _);
+pub const TIM16: timer::TimGp16 = timer::TimGp16(0x40014400 as _);
+pub const TIM17: timer::TimGp16 = timer::TimGp16(0x40014800 as _);
+pub const TIM2: timer::TimGp16 = timer::TimGp16(0x40000000 as _);
+pub const TIM3: timer::TimGp16 = timer::TimGp16(0x40000400 as _);
+pub const TIM4: timer::TimGp16 = timer::TimGp16(0x40000800 as _);
+pub const TIM5: timer::TimGp16 = timer::TimGp16(0x40000c00 as _);
+pub const TIM6: timer::TimGp16 = timer::TimGp16(0x40001000 as _);
+pub const TIM7: timer::TimGp16 = timer::TimGp16(0x40001400 as _);
+pub const TIM8: timer::TimGp16 = timer::TimGp16(0x40013400 as _);
 pub use super::regs::dma_v1 as dma;
 pub use super::regs::exti_v1 as exti;
 pub use super::regs::gpio_v2 as gpio;