rp/spi: add write-only spi driver
This commit is contained in:
parent
9cf1d5b29c
commit
88bc2972f6
@ -22,5 +22,6 @@ cortex-m-rt = "0.6.13"
|
||||
cortex-m = "0.7.1"
|
||||
critical-section = "0.2.1"
|
||||
|
||||
rp2040-pac2 = { git = "https://github.com/embassy-rs/rp2040-pac2", rev="e8635fd05f43b6c21ec462fb8c06140e1fb26961", features = ["rt"] }
|
||||
rp2040-pac2 = { git = "https://github.com/embassy-rs/rp2040-pac2", rev="fbb1004086225c74ff3c02db9309767cebef5dce", features = ["rt"] }
|
||||
#rp2040-pac2 = { path = "../../rp/rp2040-pac2" }
|
||||
embedded-hal = { version = "0.2.4", features = [ "unproven" ] }
|
||||
|
@ -14,6 +14,7 @@ pub mod interrupt;
|
||||
|
||||
pub mod dma;
|
||||
pub mod gpio;
|
||||
pub mod spi;
|
||||
pub mod uart;
|
||||
|
||||
mod clocks;
|
||||
@ -60,6 +61,9 @@ embassy_extras::peripherals! {
|
||||
UART0,
|
||||
UART1,
|
||||
|
||||
SPI0,
|
||||
SPI1,
|
||||
|
||||
DMA_CH0,
|
||||
DMA_CH1,
|
||||
DMA_CH2,
|
||||
|
179
embassy-rp/src/spi.rs
Normal file
179
embassy-rp/src/spi.rs
Normal file
@ -0,0 +1,179 @@
|
||||
use core::marker::PhantomData;
|
||||
|
||||
use embassy::util::Unborrow;
|
||||
use embassy_extras::unborrow;
|
||||
use embedded_hal::blocking::spi as eh;
|
||||
use gpio::Pin;
|
||||
|
||||
use crate::{gpio, pac, peripherals};
|
||||
|
||||
#[non_exhaustive]
|
||||
pub struct Config {
|
||||
pub frequency: u32,
|
||||
}
|
||||
|
||||
impl Default for Config {
|
||||
fn default() -> Self {
|
||||
Self {
|
||||
frequency: 1_000_000,
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
pub struct Spi<'d, T: Instance> {
|
||||
inner: T,
|
||||
phantom: PhantomData<&'d mut T>,
|
||||
}
|
||||
|
||||
impl<'d, T: Instance> Spi<'d, T> {
|
||||
pub fn new(
|
||||
inner: impl Unborrow<Target = T>,
|
||||
clk: impl Unborrow<Target = impl ClkPin<T>>,
|
||||
mosi: impl Unborrow<Target = impl MosiPin<T>>,
|
||||
miso: impl Unborrow<Target = impl MisoPin<T>>,
|
||||
config: Config,
|
||||
) -> Self {
|
||||
unborrow!(inner, clk, mosi, miso);
|
||||
|
||||
unsafe {
|
||||
let p = inner.regs();
|
||||
|
||||
let clk_peri = crate::clocks::clk_peri_freq();
|
||||
assert!(config.frequency <= clk_peri);
|
||||
|
||||
// Find smallest prescale value which puts output frequency in range of
|
||||
// post-divide. Prescale is an even number from 2 to 254 inclusive.
|
||||
let presc = (2u32..=254).step_by(2).find(|&presc| {
|
||||
(clk_peri as u64) < (presc as u64 + 2) * 256 * config.frequency as u64
|
||||
});
|
||||
|
||||
// if this fails, frequency is too low.
|
||||
let presc = unwrap!(presc);
|
||||
|
||||
// Find largest post-divide which makes output <= baudrate. Post-divide is
|
||||
// an integer in the range 1 to 256 inclusive.
|
||||
let postdiv = (1u32..=256)
|
||||
.rev()
|
||||
.find(|&postdiv| clk_peri / (presc * (postdiv - 1)) > config.frequency);
|
||||
let postdiv = unwrap!(postdiv);
|
||||
|
||||
p.cpsr().write(|w| w.set_cpsdvsr(presc as _));
|
||||
p.cr0().write(|w| {
|
||||
w.set_dss(0b0111); // 8bit
|
||||
w.set_spo(false);
|
||||
w.set_sph(false);
|
||||
w.set_scr((postdiv - 1) as u8);
|
||||
});
|
||||
p.cr1().write(|w| {
|
||||
w.set_sse(true); // enable
|
||||
});
|
||||
|
||||
info!("SPI freq: {=u32}", clk_peri / (presc * postdiv));
|
||||
|
||||
clk.io().ctrl().write(|w| w.set_funcsel(1));
|
||||
mosi.io().ctrl().write(|w| w.set_funcsel(1));
|
||||
miso.io().ctrl().write(|w| w.set_funcsel(1));
|
||||
}
|
||||
Self {
|
||||
inner,
|
||||
phantom: PhantomData,
|
||||
}
|
||||
}
|
||||
|
||||
pub fn write(&mut self, data: &[u8]) {
|
||||
unsafe {
|
||||
let p = self.inner.regs();
|
||||
for &b in data {
|
||||
while !p.sr().read().tnf() {}
|
||||
p.dr().write(|w| w.set_data(b as _));
|
||||
}
|
||||
self.flush();
|
||||
}
|
||||
}
|
||||
|
||||
pub fn flush(&mut self) {
|
||||
unsafe {
|
||||
let p = self.inner.regs();
|
||||
while p.sr().read().bsy() {}
|
||||
}
|
||||
}
|
||||
|
||||
fn drain_rx(&mut self) {
|
||||
unsafe {
|
||||
let p = self.inner.regs();
|
||||
while !p.sr().read().rne() {
|
||||
p.dr().read();
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
impl<'d, T: Instance> eh::Write<u8> for Spi<'d, T> {
|
||||
type Error = core::convert::Infallible;
|
||||
|
||||
fn write(&mut self, words: &[u8]) -> Result<(), Self::Error> {
|
||||
self.write(words);
|
||||
Ok(())
|
||||
}
|
||||
}
|
||||
|
||||
mod sealed {
|
||||
use super::*;
|
||||
|
||||
pub trait Instance {
|
||||
fn regs(&self) -> pac::spi::Spi;
|
||||
}
|
||||
pub trait ClkPin<T: Instance> {}
|
||||
pub trait CsPin<T: Instance> {}
|
||||
pub trait MosiPin<T: Instance> {}
|
||||
pub trait MisoPin<T: Instance> {}
|
||||
}
|
||||
|
||||
pub trait Instance: sealed::Instance {}
|
||||
|
||||
macro_rules! impl_instance {
|
||||
($type:ident, $irq:ident) => {
|
||||
impl sealed::Instance for peripherals::$type {
|
||||
fn regs(&self) -> pac::spi::Spi {
|
||||
pac::$type
|
||||
}
|
||||
}
|
||||
impl Instance for peripherals::$type {}
|
||||
};
|
||||
}
|
||||
|
||||
impl_instance!(SPI0, Spi0);
|
||||
impl_instance!(SPI1, Spi1);
|
||||
|
||||
pub trait ClkPin<T: Instance>: sealed::ClkPin<T> + Pin {}
|
||||
pub trait CsPin<T: Instance>: sealed::CsPin<T> + Pin {}
|
||||
pub trait MosiPin<T: Instance>: sealed::MosiPin<T> + Pin {}
|
||||
pub trait MisoPin<T: Instance>: sealed::MisoPin<T> + Pin {}
|
||||
|
||||
macro_rules! impl_pin {
|
||||
($pin:ident, $instance:ident, $function:ident) => {
|
||||
impl sealed::$function<peripherals::$instance> for peripherals::$pin {}
|
||||
impl $function<peripherals::$instance> for peripherals::$pin {}
|
||||
};
|
||||
}
|
||||
|
||||
impl_pin!(PIN_0, SPI0, MisoPin);
|
||||
impl_pin!(PIN_1, SPI0, CsPin);
|
||||
impl_pin!(PIN_2, SPI0, ClkPin);
|
||||
impl_pin!(PIN_3, SPI0, MosiPin);
|
||||
impl_pin!(PIN_4, SPI0, MisoPin);
|
||||
impl_pin!(PIN_5, SPI0, CsPin);
|
||||
impl_pin!(PIN_6, SPI0, ClkPin);
|
||||
impl_pin!(PIN_7, SPI0, MosiPin);
|
||||
impl_pin!(PIN_8, SPI1, MisoPin);
|
||||
impl_pin!(PIN_9, SPI1, CsPin);
|
||||
impl_pin!(PIN_10, SPI1, ClkPin);
|
||||
impl_pin!(PIN_11, SPI1, MosiPin);
|
||||
impl_pin!(PIN_12, SPI1, MisoPin);
|
||||
impl_pin!(PIN_13, SPI1, CsPin);
|
||||
impl_pin!(PIN_14, SPI1, ClkPin);
|
||||
impl_pin!(PIN_15, SPI1, MosiPin);
|
||||
impl_pin!(PIN_16, SPI0, MisoPin);
|
||||
impl_pin!(PIN_17, SPI0, CsPin);
|
||||
impl_pin!(PIN_18, SPI0, ClkPin);
|
||||
impl_pin!(PIN_19, SPI0, MosiPin);
|
Loading…
Reference in New Issue
Block a user