adc: Implement support for f1 ADC block

Add basic support for the STM32F1xx ADC blocks.

embassy-stm32/src/adc/f1.rs

@@ -0,0 +1,233 @@
+use crate::adc::{AdcPin, Instance};
+use crate::rcc::get_freqs;
+use crate::time::Hertz;
+use core::marker::PhantomData;
+use embassy::util::Unborrow;
+use embassy_hal_common::unborrow;
+use embedded_hal::blocking::delay::DelayUs;
+
+pub const VDDA_CALIB_MV: u32 = 3300;
+pub const ADC_MAX: u32 = (1 << 12) - 1;
+// No calibration data for F103, voltage should be 1.2v
+pub const VREF_INT: u32 = 1200;
+
+pub struct Vref;
+impl<T: Instance> AdcPin<T> for Vref {}
+impl<T: Instance> super::sealed::AdcPin<T> for Vref {
+    fn channel(&self) -> u8 {
+        17
+    }
+}
+
+pub struct Temperature;
+impl<T: Instance> AdcPin<T> for Temperature {}
+impl<T: Instance> super::sealed::AdcPin<T> for Temperature {
+    fn channel(&self) -> u8 {
+        16
+    }
+}
+
+mod sample_time {
+    /// ADC sample time
+    ///
+    /// The default setting is 1.5 ADC clock cycles.
+    #[derive(Clone, Copy, Debug, Eq, PartialEq, Ord, PartialOrd)]
+    pub enum SampleTime {
+        /// 1.5 ADC clock cycles
+        Cycles1_5 = 0b000,
+
+        /// 7.5 ADC clock cycles
+        Cycles7_5 = 0b001,
+
+        /// 13.5 ADC clock cycles
+        Cycles13_5 = 0b010,
+
+        /// 28.5 ADC clock cycles
+        Cycles28_5 = 0b011,
+
+        /// 41.5 ADC clock cycles
+        Cycles41_5 = 0b100,
+
+        /// 55.5 ADC clock cycles
+        Cycles55_5 = 0b101,
+
+        /// 71.5 ADC clock cycles
+        Cycles71_5 = 0b110,
+
+        /// 239.5 ADC clock cycles
+        Cycles239_5 = 0b111,
+    }
+
+    impl SampleTime {
+        pub(crate) fn sample_time(&self) -> crate::pac::adc::vals::SampleTime {
+            match self {
+                SampleTime::Cycles1_5 => crate::pac::adc::vals::SampleTime::CYCLES1_5,
+                SampleTime::Cycles7_5 => crate::pac::adc::vals::SampleTime::CYCLES7_5,
+                SampleTime::Cycles13_5 => crate::pac::adc::vals::SampleTime::CYCLES13_5,
+                SampleTime::Cycles28_5 => crate::pac::adc::vals::SampleTime::CYCLES28_5,
+                SampleTime::Cycles41_5 => crate::pac::adc::vals::SampleTime::CYCLES41_5,
+                SampleTime::Cycles55_5 => crate::pac::adc::vals::SampleTime::CYCLES55_5,
+                SampleTime::Cycles71_5 => crate::pac::adc::vals::SampleTime::CYCLES71_5,
+                SampleTime::Cycles239_5 => crate::pac::adc::vals::SampleTime::CYCLES239_5,
+            }
+        }
+    }
+
+    impl Default for SampleTime {
+        fn default() -> Self {
+            Self::Cycles28_5
+        }
+    }
+}
+
+pub use sample_time::SampleTime;
+
+pub struct Adc<'d, T: Instance> {
+    sample_time: SampleTime,
+    calibrated_vdda: u32,
+    phantom: PhantomData<&'d mut T>,
+}
+
+impl<'d, T: Instance> Adc<'d, T> {
+    pub fn new(_peri: impl Unborrow<Target = T> + 'd, delay: &mut impl DelayUs<u32>) -> Self {
+        unborrow!(_peri);
+        T::enable();
+        T::reset();
+        unsafe {
+            T::regs().cr2().modify(|reg| reg.set_adon(true));
+        }
+
+        // 11.4: Before starting a calibration, the ADC must have been in power-on state (ADON bit = ‘1’)
+        // for at least two ADC clock cycles
+        delay.delay_us((1_000_000 * 2) / Self::freq().0 + 1);
+
+        unsafe {
+            // Reset calibration
+            T::regs().cr2().modify(|reg| reg.set_rstcal(true));
+            while T::regs().cr2().read().rstcal() {
+                // spin
+            }
+
+            // Calibrate
+            T::regs().cr2().modify(|reg| reg.set_cal(true));
+            while T::regs().cr2().read().cal() {
+                // spin
+            }
+        }
+
+        // One cycle after calibration
+        delay.delay_us((1_000_000) / Self::freq().0 + 1);
+
+        Self {
+            sample_time: Default::default(),
+            calibrated_vdda: VDDA_CALIB_MV,
+            phantom: PhantomData,
+        }
+    }
+
+    fn freq() -> Hertz {
+        unsafe { get_freqs() }.adc
+    }
+
+    pub fn sample_time_for_us(&self, us: u32) -> SampleTime {
+        match us * Self::freq().0 / 1_000_000 {
+            0..=1 => SampleTime::Cycles1_5,
+            2..=7 => SampleTime::Cycles7_5,
+            8..=13 => SampleTime::Cycles13_5,
+            14..=28 => SampleTime::Cycles28_5,
+            29..=41 => SampleTime::Cycles41_5,
+            42..=55 => SampleTime::Cycles55_5,
+            56..=71 => SampleTime::Cycles71_5,
+            _ => SampleTime::Cycles239_5,
+        }
+    }
+
+    pub fn enable_vref(&self, _delay: &mut impl DelayUs<u32>) -> Vref {
+        unsafe {
+            T::regs().cr2().modify(|reg| {
+                reg.set_tsvrefe(true);
+            })
+        }
+        Vref {}
+    }
+
+    pub fn enable_temperature(&self) -> Temperature {
+        unsafe {
+            T::regs().cr2().modify(|reg| {
+                reg.set_tsvrefe(true);
+            })
+        }
+        Temperature {}
+    }
+
+    /// Calculates the system VDDA by sampling the internal VREF channel and comparing
+    /// to the expected value. If the chip's VDDA is not stable, run this before each ADC
+    /// conversion.
+    pub fn calibrate(&mut self, vref: &mut Vref) -> u32 {
+        let old_sample_time = self.sample_time;
+        self.sample_time = SampleTime::Cycles239_5;
+
+        let vref_samp = self.read(vref);
+        self.sample_time = old_sample_time;
+
+        self.calibrated_vdda = (ADC_MAX * VREF_INT) / u32::from(vref_samp);
+        self.calibrated_vdda
+    }
+
+    pub fn set_sample_time(&mut self, sample_time: SampleTime) {
+        self.sample_time = sample_time;
+    }
+
+    /// Convert a measurement to millivolts
+    pub fn to_millivolts(&self, sample: u16) -> u16 {
+        ((u32::from(sample) * self.calibrated_vdda) / ADC_MAX) as u16
+    }
+
+    /// Perform a single conversion.
+    fn convert(&mut self) -> u16 {
+        unsafe {
+            T::regs().cr2().modify(|reg| {
+                reg.set_adon(true);
+                reg.set_swstart(true);
+            });
+            while T::regs().cr2().read().swstart() {}
+            while !T::regs().sr().read().eoc() {}
+
+            T::regs().dr().read().0 as u16
+        }
+    }
+
+    pub fn read(&mut self, pin: &mut impl AdcPin<T>) -> u16 {
+        unsafe {
+            Self::set_channel_sample_time(pin.channel(), self.sample_time);
+            T::regs().cr1().modify(|reg| {
+                reg.set_scan(false);
+                reg.set_discen(false);
+            });
+            T::regs().sqr1().modify(|reg| reg.set_l(0));
+
+            T::regs().cr2().modify(|reg| {
+                reg.set_cont(false);
+                reg.set_exttrig(true);
+                reg.set_swstart(false);
+                reg.set_extsel(crate::pac::adc::vals::Extsel::SWSTART);
+            });
+        }
+
+        // Configure the channel to sample
+        unsafe { T::regs().sqr3().write(|reg| reg.set_sq(0, pin.channel())) }
+        self.convert()
+    }
+
+    unsafe fn set_channel_sample_time(ch: u8, sample_time: SampleTime) {
+        if ch <= 9 {
+            T::regs()
+                .smpr2()
+                .modify(|reg| reg.set_smp(ch as _, sample_time.sample_time()));
+        } else {
+            T::regs()
+                .smpr1()
+                .modify(|reg| reg.set_smp((ch - 10) as _, sample_time.sample_time()));
+        }
+    }
+}

embassy-stm32/src/adc/mod.rs

@@ -3,6 +3,7 @@
 #[cfg_attr(adc_v3, path = "v3.rs")]
 #[cfg_attr(adc_v2, path = "v2.rs")]
 #[cfg_attr(adc_g0, path = "v3.rs")]
+#[cfg_attr(adc_f1, path = "f1.rs")]
 mod _version;
 
 #[allow(unused)]
@@ -13,9 +14,11 @@ use crate::peripherals;
 pub(crate) mod sealed {
     pub trait Instance {
         fn regs() -> &'static crate::pac::adc::Adc;
+        #[cfg(not(adc_f1))]
         fn common_regs() -> &'static crate::pac::adccommon::AdcCommon;
     }
 
+    #[cfg(not(adc_f1))]
     pub trait Common {
         fn regs() -> &'static crate::pac::adccommon::AdcCommon;
     }
@@ -25,7 +28,11 @@ pub(crate) mod sealed {
     }
 }
 
+#[cfg(not(adc_f1))]
 pub trait Instance: sealed::Instance + 'static {}
+#[cfg(adc_f1)]
+pub trait Instance: sealed::Instance + crate::rcc::RccPeripheral + 'static {}
+#[cfg(not(adc_f1))]
 pub trait Common: sealed::Common + 'static {}
 pub trait AdcPin<T: Instance>: sealed::AdcPin<T> {}
 
@@ -35,6 +42,7 @@ crate::pac::peripherals!(
             fn regs() -> &'static crate::pac::adc::Adc {
                 &crate::pac::$inst
             }
+            #[cfg(not(adc_f1))]
             fn common_regs() -> &'static crate::pac::adccommon::AdcCommon {
                 crate::pac::peripherals!{
                     (adccommon, $common_inst:ident) => {
@@ -48,6 +56,7 @@ crate::pac::peripherals!(
     };
 );
 
+#[cfg(not(adc_f1))]
 crate::pac::peripherals!(
     (adccommon, $inst:ident) => {
         impl sealed::Common for peripherals::$inst {