diff --git a/embassy-hal-common/src/macros.rs b/embassy-hal-common/src/macros.rs index 7af85f78..da791313 100644 --- a/embassy-hal-common/src/macros.rs +++ b/embassy-hal-common/src/macros.rs @@ -1,10 +1,12 @@ #[macro_export] macro_rules! peripherals { ($($(#[$cfg:meta])? $name:ident),*$(,)?) => { + /// Types for the peripheral singletons. pub mod peripherals { $( $(#[$cfg])? #[allow(non_camel_case_types)] + #[doc = concat!(stringify!($name), " peripheral")] pub struct $name { _private: () } $(#[$cfg])? @@ -25,9 +27,13 @@ macro_rules! peripherals { )* } + /// Struct containing all the peripheral singletons. + /// + /// To obtain the peripherals, you must initialize the HAL, by calling [`crate::init`]. #[allow(non_snake_case)] pub struct Peripherals { $( + #[doc = concat!(stringify!($name), " peripheral")] $(#[$cfg])? pub $name: peripherals::$name, )* diff --git a/embassy-macros/src/macros/cortex_m_interrupt_declare.rs b/embassy-macros/src/macros/cortex_m_interrupt_declare.rs index ab61ad5d..ebbb47cd 100644 --- a/embassy-macros/src/macros/cortex_m_interrupt_declare.rs +++ b/embassy-macros/src/macros/cortex_m_interrupt_declare.rs @@ -6,7 +6,10 @@ pub fn run(name: syn::Ident) -> Result { let name_interrupt = format_ident!("{}", name); let name_handler = format!("__EMBASSY_{}_HANDLER", name); + let doc = format!("{} interrupt singleton.", name); + let result = quote! { + #[doc = #doc] #[allow(non_camel_case_types)] pub struct #name_interrupt(()); unsafe impl ::embassy_cortex_m::interrupt::Interrupt for #name_interrupt { diff --git a/embassy-nrf/README.md b/embassy-nrf/README.md new file mode 100644 index 00000000..a31cfae6 --- /dev/null +++ b/embassy-nrf/README.md @@ -0,0 +1,58 @@ +# Embassy nRF HAL + +HALs implement safe, idiomatic Rust APIs to use the hardware capabilities, so raw register manipulation is not needed. + +The Embassy nRF HAL targets the Nordic Semiconductor nRF family of hardware. The HAL implements both blocking and async APIs +for many peripherals. The benefit of using the async APIs is that the HAL takes care of waiting for peripherals to +complete operations in low power mod and handling interrupts, so that applications can focus on more important matters. + +## EasyDMA considerations + +On nRF chips, peripherals can use the so called EasyDMA feature to offload the task of interacting +with peripherals. It takes care of sending/receiving data over a variety of bus protocols (TWI/I2C, UART, SPI). +However, EasyDMA requires the buffers used to transmit and receive data to reside in RAM. Unfortunately, Rust +slices will not always do so. The following example using the SPI peripheral shows a common situation where this might happen: + +```no_run +// As we pass a slice to the function whose contents will not ever change, +// the compiler writes it into the flash and thus the pointer to it will +// reference static memory. Since EasyDMA requires slices to reside in RAM, +// this function call will fail. +let result = spim.write_from_ram(&[1, 2, 3]); +assert_eq!(result, Err(Error::BufferNotInRAM)); + +// The data is still static and located in flash. However, since we are assigning +// it to a variable, the compiler will load it into memory. Passing a reference to the +// variable will yield a pointer that references dynamic memory, thus making EasyDMA happy. +// This function call succeeds. +let data = [1, 2, 3]; +let result = spim.write_from_ram(&data); +assert!(result.is_ok()); +``` + +Each peripheral struct which uses EasyDMA ([`Spim`](spim::Spim), [`Uarte`](uarte::Uarte), [`Twim`](twim::Twim)) has two variants of their mutating functions: +- Functions with the suffix (e.g. [`write_from_ram`](spim::Spim::write_from_ram), [`transfer_from_ram`](spim::Spim::transfer_from_ram)) will return an error if the passed slice does not reside in RAM. +- Functions without the suffix (e.g. [`write`](spim::Spim::write), [`transfer`](spim::Spim::transfer)) will check whether the data is in RAM and copy it into memory prior to transmission. + +Since copying incurs a overhead, you are given the option to choose from `_from_ram` variants which will +fail and notify you, or the more convenient versions without the suffix which are potentially a little bit +more inefficient. Be aware that this overhead is not only in terms of instruction count but also in terms of memory usage +as the methods without the suffix will be allocating a statically sized buffer (up to 512 bytes for the nRF52840). + +Note that the methods that read data like [`read`](spim::Spim::read) and [`transfer_in_place`](spim::Spim::transfer_in_place) do not have the corresponding `_from_ram` variants as +mutable slices always reside in RAM. + +## Minimum supported Rust version (MSRV) + +Embassy is guaranteed to compile on the latest stable Rust version at the time of release. It might compile with older versions but that may change in any new patch release. + +## License + +This work is licensed under either of + +- Apache License, Version 2.0 ([LICENSE-APACHE](LICENSE-APACHE) or + ) +- MIT license ([LICENSE-MIT](LICENSE-MIT) or ) + +at your option. + diff --git a/embassy-nrf/src/buffered_uarte.rs b/embassy-nrf/src/buffered_uarte.rs index ea25236f..112f084c 100644 --- a/embassy-nrf/src/buffered_uarte.rs +++ b/embassy-nrf/src/buffered_uarte.rs @@ -1,4 +1,4 @@ -//! Async buffered UART +//! Async buffered UART driver. //! //! WARNING!!! The functionality provided here is intended to be used only //! in situations where hardware flow control are available i.e. CTS and RTS. @@ -69,7 +69,7 @@ struct StateInner<'d, U: UarteInstance, T: TimerInstance> { tx_waker: WakerRegistration, } -/// Interface to a UARTE instance +/// Buffered UARTE driver. pub struct BufferedUarte<'d, U: UarteInstance, T: TimerInstance> { inner: RefCell>>, } @@ -199,6 +199,9 @@ impl<'d, U: UarteInstance, T: TimerInstance> BufferedUarte<'d, U, T> { }); } + /// Split the UART in reader and writer parts. + /// + /// This allows reading and writing concurrently from independent tasks. pub fn split<'u>(&'u mut self) -> (BufferedUarteRx<'u, 'd, U, T>, BufferedUarteTx<'u, 'd, U, T>) { (BufferedUarteRx { inner: self }, BufferedUarteTx { inner: self }) } @@ -320,10 +323,12 @@ impl<'d, U: UarteInstance, T: TimerInstance> BufferedUarte<'d, U, T> { } } +/// Reader part of the buffered UARTE driver. pub struct BufferedUarteTx<'u, 'd, U: UarteInstance, T: TimerInstance> { inner: &'u BufferedUarte<'d, U, T>, } +/// Writer part of the buffered UARTE driver. pub struct BufferedUarteRx<'u, 'd, U: UarteInstance, T: TimerInstance> { inner: &'u BufferedUarte<'d, U, T>, } diff --git a/embassy-nrf/src/chips/nrf5340_app.rs b/embassy-nrf/src/chips/nrf5340_app.rs index 4575f09f..c600fcbf 100644 --- a/embassy-nrf/src/chips/nrf5340_app.rs +++ b/embassy-nrf/src/chips/nrf5340_app.rs @@ -1,3 +1,4 @@ +/// Peripheral Access Crate #[allow(unused_imports)] #[rustfmt::skip] pub mod pac { diff --git a/embassy-nrf/src/chips/nrf5340_net.rs b/embassy-nrf/src/chips/nrf5340_net.rs index 54827238..a46583ec 100644 --- a/embassy-nrf/src/chips/nrf5340_net.rs +++ b/embassy-nrf/src/chips/nrf5340_net.rs @@ -1,3 +1,4 @@ +/// Peripheral Access Crate #[allow(unused_imports)] #[rustfmt::skip] pub mod pac { diff --git a/embassy-nrf/src/chips/nrf9160.rs b/embassy-nrf/src/chips/nrf9160.rs index 472ee677..e1509ddd 100644 --- a/embassy-nrf/src/chips/nrf9160.rs +++ b/embassy-nrf/src/chips/nrf9160.rs @@ -1,3 +1,4 @@ +/// Peripheral Access Crate #[allow(unused_imports)] #[rustfmt::skip] pub mod pac { diff --git a/embassy-nrf/src/gpio.rs b/embassy-nrf/src/gpio.rs index 6ef5033e..895ab934 100644 --- a/embassy-nrf/src/gpio.rs +++ b/embassy-nrf/src/gpio.rs @@ -1,4 +1,4 @@ -//! General purpose input/output for nRF. +//! General purpose input/output (GPIO) driver. #![macro_use] use core::convert::Infallible; diff --git a/embassy-nrf/src/gpiote.rs b/embassy-nrf/src/gpiote.rs index 7467dbc6..e1816eb9 100644 --- a/embassy-nrf/src/gpiote.rs +++ b/embassy-nrf/src/gpiote.rs @@ -1,3 +1,5 @@ +//! GPIO task/event (GPIOTE) driver. + use core::convert::Infallible; use core::future::{poll_fn, Future}; use core::task::{Context, Poll}; @@ -11,29 +13,38 @@ use crate::interrupt::{Interrupt, InterruptExt}; use crate::ppi::{Event, Task}; use crate::{interrupt, pac, peripherals}; -pub const CHANNEL_COUNT: usize = 8; +/// Amount of GPIOTE channels in the chip. +const CHANNEL_COUNT: usize = 8; #[cfg(any(feature = "nrf52833", feature = "nrf52840"))] -pub const PIN_COUNT: usize = 48; +const PIN_COUNT: usize = 48; #[cfg(not(any(feature = "nrf52833", feature = "nrf52840")))] -pub const PIN_COUNT: usize = 32; +const PIN_COUNT: usize = 32; #[allow(clippy::declare_interior_mutable_const)] const NEW_AW: AtomicWaker = AtomicWaker::new(); static CHANNEL_WAKERS: [AtomicWaker; CHANNEL_COUNT] = [NEW_AW; CHANNEL_COUNT]; static PORT_WAKERS: [AtomicWaker; PIN_COUNT] = [NEW_AW; PIN_COUNT]; +/// Polarity for listening to events for GPIOTE input channels. pub enum InputChannelPolarity { + /// Don't listen for any pin changes. None, + /// Listen for high to low changes. HiToLo, + /// Listen for low to high changes. LoToHi, + /// Listen for any change, either low to high or high to low. Toggle, } -/// Polarity of the `task out` operation. +/// Polarity of the OUT task operation for GPIOTE output channels. pub enum OutputChannelPolarity { + /// Set the pin high. Set, + /// Set the pin low. Clear, + /// Toggle the pin. Toggle, } @@ -162,6 +173,7 @@ impl<'d, C: Channel, T: GpioPin> Drop for InputChannel<'d, C, T> { } impl<'d, C: Channel, T: GpioPin> InputChannel<'d, C, T> { + /// Create a new GPIOTE input channel driver. pub fn new(ch: impl Peripheral

+ 'd, pin: Input<'d, T>, polarity: InputChannelPolarity) -> Self { into_ref!(ch); @@ -188,6 +200,7 @@ impl<'d, C: Channel, T: GpioPin> InputChannel<'d, C, T> { InputChannel { ch, pin } } + /// Asynchronously wait for an event in this channel. pub async fn wait(&self) { let g = regs(); let num = self.ch.number(); @@ -231,6 +244,7 @@ impl<'d, C: Channel, T: GpioPin> Drop for OutputChannel<'d, C, T> { } impl<'d, C: Channel, T: GpioPin> OutputChannel<'d, C, T> { + /// Create a new GPIOTE output channel driver. pub fn new(ch: impl Peripheral

+ 'd, pin: Output<'d, T>, polarity: OutputChannelPolarity) -> Self { into_ref!(ch); let g = regs(); @@ -258,20 +272,20 @@ impl<'d, C: Channel, T: GpioPin> OutputChannel<'d, C, T> { OutputChannel { ch, _pin: pin } } - /// Triggers `task out` (as configured with task_out_polarity, defaults to Toggle). + /// Triggers the OUT task (does the action as configured with task_out_polarity, defaults to Toggle). pub fn out(&self) { let g = regs(); g.tasks_out[self.ch.number()].write(|w| unsafe { w.bits(1) }); } - /// Triggers `task set` (set associated pin high). + /// Triggers the SET task (set associated pin high). #[cfg(not(feature = "nrf51"))] pub fn set(&self) { let g = regs(); g.tasks_set[self.ch.number()].write(|w| unsafe { w.bits(1) }); } - /// Triggers `task clear` (set associated pin low). + /// Triggers the CLEAR task (set associated pin low). #[cfg(not(feature = "nrf51"))] pub fn clear(&self) { let g = regs(); @@ -336,48 +350,58 @@ impl<'a> Future for PortInputFuture<'a> { } impl<'d, T: GpioPin> Input<'d, T> { + /// Wait until the pin is high. If it is already high, return immediately. pub async fn wait_for_high(&mut self) { self.pin.wait_for_high().await } + /// Wait until the pin is low. If it is already low, return immediately. pub async fn wait_for_low(&mut self) { self.pin.wait_for_low().await } + /// Wait for the pin to undergo a transition from low to high. pub async fn wait_for_rising_edge(&mut self) { self.pin.wait_for_rising_edge().await } + /// Wait for the pin to undergo a transition from high to low. pub async fn wait_for_falling_edge(&mut self) { self.pin.wait_for_falling_edge().await } + /// Wait for the pin to undergo any transition, i.e low to high OR high to low. pub async fn wait_for_any_edge(&mut self) { self.pin.wait_for_any_edge().await } } impl<'d, T: GpioPin> Flex<'d, T> { + /// Wait until the pin is high. If it is already high, return immediately. pub async fn wait_for_high(&mut self) { self.pin.conf().modify(|_, w| w.sense().high()); PortInputFuture::new(&mut self.pin).await } + /// Wait until the pin is low. If it is already low, return immediately. pub async fn wait_for_low(&mut self) { self.pin.conf().modify(|_, w| w.sense().low()); PortInputFuture::new(&mut self.pin).await } + /// Wait for the pin to undergo a transition from low to high. pub async fn wait_for_rising_edge(&mut self) { self.wait_for_low().await; self.wait_for_high().await; } + /// Wait for the pin to undergo a transition from high to low. pub async fn wait_for_falling_edge(&mut self) { self.wait_for_high().await; self.wait_for_low().await; } + /// Wait for the pin to undergo any transition, i.e low to high OR high to low. pub async fn wait_for_any_edge(&mut self) { if self.is_high() { self.pin.conf().modify(|_, w| w.sense().low()); @@ -394,8 +418,17 @@ mod sealed { pub trait Channel {} } +/// GPIOTE channel trait. +/// +/// Implemented by all GPIOTE channels. pub trait Channel: sealed::Channel + Sized { + /// Get the channel number. fn number(&self) -> usize; + + /// Convert this channel to a type-erased `AnyChannel`. + /// + /// This allows using several channels in situations that might require + /// them to be the same type, like putting them in an array. fn degrade(self) -> AnyChannel { AnyChannel { number: self.number() as u8, @@ -403,6 +436,12 @@ pub trait Channel: sealed::Channel + Sized { } } +/// Type-erased channel. +/// +/// Obtained by calling `Channel::degrade`. +/// +/// This allows using several channels in situations that might require +/// them to be the same type, like putting them in an array. pub struct AnyChannel { number: u8, } diff --git a/embassy-nrf/src/i2s.rs b/embassy-nrf/src/i2s.rs index 7e950775..770df7c8 100644 --- a/embassy-nrf/src/i2s.rs +++ b/embassy-nrf/src/i2s.rs @@ -1,6 +1,6 @@ -#![macro_use] +//! Inter-IC Sound (I2S) driver. -//! Support for I2S audio +#![macro_use] use core::future::poll_fn; use core::marker::PhantomData; @@ -19,16 +19,23 @@ use crate::pac::i2s::RegisterBlock; use crate::util::{slice_in_ram_or, slice_ptr_parts}; use crate::{Peripheral, EASY_DMA_SIZE}; +/// Type alias for `MultiBuffering` with 2 buffers. pub type DoubleBuffering = MultiBuffering; +/// I2S transfer error. #[derive(Debug, Clone, Copy, PartialEq, Eq)] #[cfg_attr(feature = "defmt", derive(defmt::Format))] #[non_exhaustive] pub enum Error { + /// The buffer is too long. BufferTooLong, + /// The buffer is empty. BufferZeroLength, - BufferNotInDataMemory, + /// The buffer is not in data RAM. It's most likely in flash, and nRF's DMA cannot access flash. + BufferNotInRAM, + /// The buffer address is not aligned. BufferMisaligned, + /// The buffer length is not a multiple of the alignment. BufferLengthMisaligned, } @@ -36,34 +43,16 @@ pub enum Error { #[derive(Clone)] #[non_exhaustive] pub struct Config { + /// Sample width pub sample_width: SampleWidth, + /// Alignment pub align: Align, + /// Sample format pub format: Format, + /// Channel configuration. pub channels: Channels, } -impl Config { - pub fn sample_width(mut self, sample_width: SampleWidth) -> Self { - self.sample_width = sample_width; - self - } - - pub fn align(mut self, align: Align) -> Self { - self.align = align; - self - } - - pub fn format(mut self, format: Format) -> Self { - self.format = format; - self - } - - pub fn channels(mut self, channels: Channels) -> Self { - self.channels = channels; - self - } -} - impl Default for Config { fn default() -> Self { Self { @@ -75,7 +64,7 @@ impl Default for Config { } } -/// I2S Mode +/// I2S clock configuration. #[derive(Debug, Eq, PartialEq, Clone, Copy)] pub struct MasterClock { freq: MckFreq, @@ -83,12 +72,14 @@ pub struct MasterClock { } impl MasterClock { + /// Create a new `MasterClock`. pub fn new(freq: MckFreq, ratio: Ratio) -> Self { Self { freq, ratio } } } impl MasterClock { + /// Get the sample rate for this clock configuration. pub fn sample_rate(&self) -> u32 { self.freq.to_frequency() / self.ratio.to_divisor() } @@ -97,18 +88,31 @@ impl MasterClock { /// Master clock generator frequency. #[derive(Debug, Eq, PartialEq, Clone, Copy)] pub enum MckFreq { + /// 32 Mhz / 8 = 4000.00 kHz _32MDiv8, + /// 32 Mhz / 10 = 3200.00 kHz _32MDiv10, + /// 32 Mhz / 11 = 2909.09 kHz _32MDiv11, + /// 32 Mhz / 15 = 2133.33 kHz _32MDiv15, + /// 32 Mhz / 16 = 2000.00 kHz _32MDiv16, + /// 32 Mhz / 21 = 1523.81 kHz _32MDiv21, + /// 32 Mhz / 23 = 1391.30 kHz _32MDiv23, + /// 32 Mhz / 30 = 1066.67 kHz _32MDiv30, + /// 32 Mhz / 31 = 1032.26 kHz _32MDiv31, + /// 32 Mhz / 32 = 1000.00 kHz _32MDiv32, + /// 32 Mhz / 42 = 761.90 kHz _32MDiv42, + /// 32 Mhz / 63 = 507.94 kHz _32MDiv63, + /// 32 Mhz / 125 = 256.00 kHz _32MDiv125, } @@ -146,14 +150,23 @@ impl From for usize { /// #[derive(Debug, Eq, PartialEq, Clone, Copy)] pub enum Ratio { + /// Divide by 32 _32x, + /// Divide by 48 _48x, + /// Divide by 64 _64x, + /// Divide by 96 _96x, + /// Divide by 128 _128x, + /// Divide by 192 _192x, + /// Divide by 256 _256x, + /// Divide by 384 _384x, + /// Divide by 512 _512x, } @@ -165,6 +178,7 @@ impl Ratio { usize::from(*self) as u8 } + /// Return the divisor for this ratio pub fn to_divisor(&self) -> u32 { Self::RATIOS[usize::from(*self)] } @@ -183,11 +197,17 @@ impl From for usize { /// For custom master clock configuration, please refer to [MasterClock]. #[derive(Clone, Copy)] pub enum ApproxSampleRate { + /// 11025 Hz _11025, + /// 16000 Hz _16000, + /// 22050 Hz _22050, + /// 32000 Hz _32000, + /// 44100 Hz _44100, + /// 48000 Hz _48000, } @@ -211,6 +231,7 @@ impl From for MasterClock { } impl ApproxSampleRate { + /// Get the sample rate as an integer. pub fn sample_rate(&self) -> u32 { MasterClock::from(*self).sample_rate() } @@ -223,20 +244,32 @@ impl ApproxSampleRate { /// For custom master clock configuration, please refer to [Mode]. #[derive(Clone, Copy)] pub enum ExactSampleRate { + /// 8000 Hz _8000, + /// 10582 Hz _10582, + /// 12500 Hz _12500, + /// 15625 Hz _15625, + /// 15873 Hz _15873, + /// 25000 Hz _25000, + /// 31250 Hz _31250, + /// 50000 Hz _50000, + /// 62500 Hz _62500, + /// 100000 Hz _100000, + /// 125000 Hz _125000, } impl ExactSampleRate { + /// Get the sample rate as an integer. pub fn sample_rate(&self) -> u32 { MasterClock::from(*self).sample_rate() } @@ -263,8 +296,11 @@ impl From for MasterClock { /// Sample width. #[derive(Debug, Eq, PartialEq, Clone, Copy)] pub enum SampleWidth { + /// 8 bit samples. _8bit, + /// 16 bit samples. _16bit, + /// 24 bit samples. _24bit, } @@ -277,7 +313,9 @@ impl From for u8 { /// Channel used for the most significant sample value in a frame. #[derive(Debug, Eq, PartialEq, Clone, Copy)] pub enum Align { + /// Left-align samples. Left, + /// Right-align samples. Right, } @@ -293,7 +331,9 @@ impl From for bool { /// Frame format. #[derive(Debug, Eq, PartialEq, Clone, Copy)] pub enum Format { + /// I2S frame format I2S, + /// Aligned frame format Aligned, } @@ -309,8 +349,11 @@ impl From for bool { /// Channels #[derive(Debug, Eq, PartialEq, Clone, Copy)] pub enum Channels { + /// Stereo (2 channels). Stereo, + /// Mono, left channel only. MonoLeft, + /// Mono, right channel only. MonoRight, } @@ -320,7 +363,7 @@ impl From for u8 { } } -/// Interface to the I2S peripheral using EasyDMA to offload the transmission and reception workload. +/// I2S driver. pub struct I2S<'d, T: Instance> { i2s: PeripheralRef<'d, T>, irq: PeripheralRef<'d, T::Interrupt>, @@ -566,7 +609,7 @@ impl<'d, T: Instance> I2S<'d, T> { { trace!("SEND: {}", buffer_ptr as *const S as u32); - slice_in_ram_or(buffer_ptr, Error::BufferNotInDataMemory)?; + slice_in_ram_or(buffer_ptr, Error::BufferNotInRAM)?; compiler_fence(Ordering::SeqCst); @@ -1003,7 +1046,10 @@ impl Device { /// Sample details pub trait Sample: Sized + Copy + Default { + /// Width of this sample type. const WIDTH: usize; + + /// Scale of this sample. const SCALE: Self; } @@ -1022,12 +1068,13 @@ impl Sample for i32 { const SCALE: Self = 1 << (Self::WIDTH - 1); } -/// A 4-bytes aligned buffer. +/// A 4-bytes aligned buffer. Needed for DMA access. #[derive(Clone, Copy)] #[repr(align(4))] pub struct AlignedBuffer([T; N]); impl AlignedBuffer { + /// Create a new `AlignedBuffer`. pub fn new(array: [T; N]) -> Self { Self(array) } @@ -1052,12 +1099,14 @@ impl DerefMut for AlignedBuffer { } } +/// Set of multiple buffers, for multi-buffering transfers. pub struct MultiBuffering { buffers: [AlignedBuffer; NB], index: usize, } impl MultiBuffering { + /// Create a new `MultiBuffering`. pub fn new() -> Self { assert!(NB > 1); Self { @@ -1119,7 +1168,9 @@ pub(crate) mod sealed { } } +/// I2S peripehral instance. pub trait Instance: Peripheral

+ sealed::Instance + 'static + Send { + /// Interrupt for this peripheral. type Interrupt: Interrupt; } diff --git a/embassy-nrf/src/lib.rs b/embassy-nrf/src/lib.rs index 1dd0e790..20e70a24 100644 --- a/embassy-nrf/src/lib.rs +++ b/embassy-nrf/src/lib.rs @@ -1,53 +1,11 @@ -//! # Embassy nRF HAL -//! -//! HALs implement safe, idiomatic Rust APIs to use the hardware capabilities, so raw register manipulation is not needed. -//! -//! The Embassy nRF HAL targets the Nordic Semiconductor nRF family of hardware. The HAL implements both blocking and async APIs -//! for many peripherals. The benefit of using the async APIs is that the HAL takes care of waiting for peripherals to -//! complete operations in low power mod and handling interrupts, so that applications can focus on more important matters. -//! -//! ## EasyDMA considerations -//! -//! On nRF chips, peripherals can use the so called EasyDMA feature to offload the task of interacting -//! with peripherals. It takes care of sending/receiving data over a variety of bus protocols (TWI/I2C, UART, SPI). -//! However, EasyDMA requires the buffers used to transmit and receive data to reside in RAM. Unfortunately, Rust -//! slices will not always do so. The following example using the SPI peripheral shows a common situation where this might happen: -//! -//! ```no_run -//! // As we pass a slice to the function whose contents will not ever change, -//! // the compiler writes it into the flash and thus the pointer to it will -//! // reference static memory. Since EasyDMA requires slices to reside in RAM, -//! // this function call will fail. -//! let result = spim.write_from_ram(&[1, 2, 3]); -//! assert_eq!(result, Err(Error::DMABufferNotInDataMemory)); -//! -//! // The data is still static and located in flash. However, since we are assigning -//! // it to a variable, the compiler will load it into memory. Passing a reference to the -//! // variable will yield a pointer that references dynamic memory, thus making EasyDMA happy. -//! // This function call succeeds. -//! let data = [1, 2, 3]; -//! let result = spim.write_from_ram(&data); -//! assert!(result.is_ok()); -//! ``` -//! -//! Each peripheral struct which uses EasyDMA ([`Spim`](spim::Spim), [`Uarte`](uarte::Uarte), [`Twim`](twim::Twim)) has two variants of their mutating functions: -//! - Functions with the suffix (e.g. [`write_from_ram`](spim::Spim::write_from_ram), [`transfer_from_ram`](spim::Spim::transfer_from_ram)) will return an error if the passed slice does not reside in RAM. -//! - Functions without the suffix (e.g. [`write`](spim::Spim::write), [`transfer`](spim::Spim::transfer)) will check whether the data is in RAM and copy it into memory prior to transmission. -//! -//! Since copying incurs a overhead, you are given the option to choose from `_from_ram` variants which will -//! fail and notify you, or the more convenient versions without the suffix which are potentially a little bit -//! more inefficient. Be aware that this overhead is not only in terms of instruction count but also in terms of memory usage -//! as the methods without the suffix will be allocating a statically sized buffer (up to 512 bytes for the nRF52840). -//! -//! Note that the methods that read data like [`read`](spim::Spim::read) and [`transfer_in_place`](spim::Spim::transfer_in_place) do not have the corresponding `_from_ram` variants as -//! mutable slices always reside in RAM. - #![no_std] #![cfg_attr( feature = "nightly", feature(type_alias_impl_trait, async_fn_in_trait, impl_trait_projections) )] #![cfg_attr(feature = "nightly", allow(incomplete_features))] +#![doc = include_str!("../README.md")] +#![warn(missing_docs)] #[cfg(not(any( feature = "nrf51", diff --git a/embassy-nrf/src/nvmc.rs b/embassy-nrf/src/nvmc.rs index 405ea317..c1ffa31a 100644 --- a/embassy-nrf/src/nvmc.rs +++ b/embassy-nrf/src/nvmc.rs @@ -1,4 +1,4 @@ -//! Non-Volatile Memory Controller (NVMC) module. +//! Non-Volatile Memory Controller (NVMC, AKA internal flash) driver. use core::{ptr, slice}; diff --git a/embassy-nrf/src/pdm.rs b/embassy-nrf/src/pdm.rs index b7c7022c..54feca4c 100644 --- a/embassy-nrf/src/pdm.rs +++ b/embassy-nrf/src/pdm.rs @@ -1,4 +1,4 @@ -//! PDM mirophone interface +//! Pulse Density Modulation (PDM) mirophone driver. use core::marker::PhantomData; use core::sync::atomic::{compiler_fence, Ordering}; @@ -22,12 +22,16 @@ pub struct Pdm<'d> { phantom: PhantomData<&'d PDM>, } +/// PDM error. #[derive(Debug, Clone, Copy, PartialEq, Eq)] #[cfg_attr(feature = "defmt", derive(defmt::Format))] #[non_exhaustive] pub enum Error { + /// Buffer is too long. BufferTooLong, + /// Buffer is empty BufferZeroLength, + /// PDM is not running NotRunning, } @@ -119,6 +123,7 @@ impl<'d> Pdm<'d> { r.events_started.reset(); } + /// Sample data into the given buffer. pub async fn sample(&mut self, buffer: &mut [i16]) -> Result<(), Error> { if buffer.len() == 0 { return Err(Error::BufferZeroLength); @@ -215,14 +220,21 @@ impl Default for Config { } } +/// PDM operation mode. #[derive(PartialEq)] pub enum OperationMode { + /// Mono (1 channel) Mono, + /// Stereo (2 channels) Stereo, } + +/// PDM edge polarity #[derive(PartialEq)] pub enum Edge { + /// Left edge is rising LeftRising, + /// Left edge is falling LeftFalling, } diff --git a/embassy-nrf/src/ppi/dppi.rs b/embassy-nrf/src/ppi/dppi.rs index de856c0c..0908cd7b 100644 --- a/embassy-nrf/src/ppi/dppi.rs +++ b/embassy-nrf/src/ppi/dppi.rs @@ -11,12 +11,14 @@ fn regs() -> &'static pac::dppic::RegisterBlock { } impl<'d, C: ConfigurableChannel> Ppi<'d, C, 1, 1> { + /// Configure PPI channel to trigger `task` on `event`. pub fn new_one_to_one(ch: impl Peripheral

+ 'd, event: Event, task: Task) -> Self { Ppi::new_many_to_many(ch, [event], [task]) } } impl<'d, C: ConfigurableChannel> Ppi<'d, C, 1, 2> { + /// Configure PPI channel to trigger both `task1` and `task2` on `event`. pub fn new_one_to_two(ch: impl Peripheral

+ 'd, event: Event, task1: Task, task2: Task) -> Self { Ppi::new_many_to_many(ch, [event], [task1, task2]) } @@ -25,6 +27,7 @@ impl<'d, C: ConfigurableChannel> Ppi<'d, C, 1, 2> { impl<'d, C: ConfigurableChannel, const EVENT_COUNT: usize, const TASK_COUNT: usize> Ppi<'d, C, EVENT_COUNT, TASK_COUNT> { + /// Configure a DPPI channel to trigger all `tasks` when any of the `events` fires. pub fn new_many_to_many( ch: impl Peripheral

+ 'd, events: [Event; EVENT_COUNT], diff --git a/embassy-nrf/src/ppi/mod.rs b/embassy-nrf/src/ppi/mod.rs index 8f5ed14c..b76eccf0 100644 --- a/embassy-nrf/src/ppi/mod.rs +++ b/embassy-nrf/src/ppi/mod.rs @@ -1,6 +1,6 @@ #![macro_use] -//! HAL interface for the PPI and DPPI peripheral. +//! Programmable Peripheral Interconnect (PPI/DPPI) driver. //! //! The (Distributed) Programmable Peripheral Interconnect interface allows for an autonomous interoperability //! between peripherals through their events and tasks. There are fixed PPI channels and fully diff --git a/embassy-nrf/src/ppi/ppi.rs b/embassy-nrf/src/ppi/ppi.rs index 19abc4e1..a96ab50b 100644 --- a/embassy-nrf/src/ppi/ppi.rs +++ b/embassy-nrf/src/ppi/ppi.rs @@ -48,7 +48,7 @@ impl<'d, C: ConfigurableChannel> Ppi<'d, C, 1, 1> { #[cfg(not(feature = "nrf51"))] // Not for nrf51 because of the fork task impl<'d, C: ConfigurableChannel> Ppi<'d, C, 1, 2> { - /// Configure PPI channel to trigger `task1` and `task2` on `event`. + /// Configure PPI channel to trigger both `task1` and `task2` on `event`. pub fn new_one_to_two(ch: impl Peripheral

+ 'd, event: Event, task1: Task, task2: Task) -> Self { into_ref!(ch); diff --git a/embassy-nrf/src/pwm.rs b/embassy-nrf/src/pwm.rs index 5f750a91..708f2310 100644 --- a/embassy-nrf/src/pwm.rs +++ b/embassy-nrf/src/pwm.rs @@ -1,3 +1,5 @@ +//! Pulse Width Modulation (PWM) driver. + #![macro_use] use core::sync::atomic::{compiler_fence, Ordering}; @@ -32,6 +34,7 @@ pub struct SequencePwm<'d, T: Instance> { ch3: Option>, } +/// PWM error #[derive(Debug, Clone, Copy, PartialEq, Eq)] #[cfg_attr(feature = "defmt", derive(defmt::Format))] #[non_exhaustive] @@ -41,7 +44,7 @@ pub enum Error { /// Min Sequence count is 1 SequenceTimesAtLeastOne, /// EasyDMA can only read from data memory, read only buffers in flash will fail. - DMABufferNotInDataMemory, + BufferNotInRAM, } const MAX_SEQUENCE_LEN: usize = 32767; @@ -358,6 +361,7 @@ pub struct Sequence<'s> { } impl<'s> Sequence<'s> { + /// Create a new `Sequence` pub fn new(words: &'s [u16], config: SequenceConfig) -> Self { Self { words, config } } @@ -367,7 +371,7 @@ impl<'s> Sequence<'s> { /// Takes at one sequence along with its configuration. #[non_exhaustive] pub struct SingleSequencer<'d, 's, T: Instance> { - pub sequencer: Sequencer<'d, 's, T>, + sequencer: Sequencer<'d, 's, T>, } impl<'d, 's, T: Instance> SingleSequencer<'d, 's, T> { @@ -428,8 +432,8 @@ impl<'d, 's, T: Instance> Sequencer<'d, 's, T> { let sequence0 = &self.sequence0; let alt_sequence = self.sequence1.as_ref().unwrap_or(&self.sequence0); - slice_in_ram_or(sequence0.words, Error::DMABufferNotInDataMemory)?; - slice_in_ram_or(alt_sequence.words, Error::DMABufferNotInDataMemory)?; + slice_in_ram_or(sequence0.words, Error::BufferNotInRAM)?; + slice_in_ram_or(alt_sequence.words, Error::BufferNotInRAM)?; if sequence0.words.len() > MAX_SEQUENCE_LEN || alt_sequence.words.len() > MAX_SEQUENCE_LEN { return Err(Error::SequenceTooLong); @@ -536,13 +540,21 @@ pub enum SequenceMode { /// PWM Base clock is system clock (16MHz) divided by prescaler #[derive(Debug, Eq, PartialEq, Clone, Copy)] pub enum Prescaler { + /// Divide by 1 Div1, + /// Divide by 2 Div2, + /// Divide by 4 Div4, + /// Divide by 8 Div8, + /// Divide by 16 Div16, + /// Divide by 32 Div32, + /// Divide by 64 Div64, + /// Divide by 128 Div128, } @@ -828,7 +840,9 @@ pub(crate) mod sealed { } } +/// PWM peripheral instance. pub trait Instance: Peripheral

+ sealed::Instance + 'static { + /// Interrupt for this peripheral. type Interrupt: Interrupt; } diff --git a/embassy-nrf/src/qdec.rs b/embassy-nrf/src/qdec.rs index 253c85c3..c01babca 100644 --- a/embassy-nrf/src/qdec.rs +++ b/embassy-nrf/src/qdec.rs @@ -1,4 +1,4 @@ -//! Quadrature decoder interface +//! Quadrature decoder (QDEC) driver. use core::future::poll_fn; use core::task::Poll; @@ -12,17 +12,23 @@ use crate::interrupt::InterruptExt; use crate::peripherals::QDEC; use crate::{interrupt, pac, Peripheral}; -/// Quadrature decoder +/// Quadrature decoder driver. pub struct Qdec<'d> { _p: PeripheralRef<'d, QDEC>, } +/// QDEC config #[non_exhaustive] pub struct Config { + /// Number of samples pub num_samples: NumSamples, + /// Sample period pub period: SamplePeriod, + /// Set LED output pin polarity pub led_polarity: LedPolarity, + /// Enable/disable input debounce filters pub debounce: bool, + /// Time period the LED is switched ON prior to sampling (0..511 us). pub led_pre_usecs: u16, } @@ -41,6 +47,7 @@ impl Default for Config { static WAKER: AtomicWaker = AtomicWaker::new(); impl<'d> Qdec<'d> { + /// Create a new QDEC. pub fn new( qdec: impl Peripheral

+ 'd, irq: impl Peripheral

+ 'd, @@ -52,6 +59,7 @@ impl<'d> Qdec<'d> { Self::new_inner(qdec, irq, a.map_into(), b.map_into(), None, config) } + /// Create a new QDEC, with a pin for LED output. pub fn new_with_led( qdec: impl Peripheral

+ 'd, irq: impl Peripheral

+ 'd, @@ -170,36 +178,61 @@ impl<'d> Qdec<'d> { } } +/// Sample period #[derive(Debug, Eq, PartialEq, Clone, Copy)] pub enum SamplePeriod { + /// 128 us _128us, + /// 256 us _256us, + /// 512 us _512us, + /// 1024 us _1024us, + /// 2048 us _2048us, + /// 4096 us _4096us, + /// 8192 us _8192us, + /// 16384 us _16384us, + /// 32 ms _32ms, + /// 65 ms _65ms, + /// 131 ms _131ms, } +/// Number of samples taken. #[derive(Debug, Eq, PartialEq, Clone, Copy)] pub enum NumSamples { + /// 10 samples _10smpl, + /// 40 samples _40smpl, + /// 80 samples _80smpl, + /// 120 samples _120smpl, + /// 160 samples _160smpl, + /// 200 samples _200smpl, + /// 240 samples _240smpl, + /// 280 samples _280smpl, + /// 1 sample _1smpl, } +/// LED polarity #[derive(Debug, Eq, PartialEq, Clone, Copy)] pub enum LedPolarity { + /// Active high (a high output turns on the LED). ActiveHigh, + /// Active low (a low output turns on the LED). ActiveLow, } diff --git a/embassy-nrf/src/qspi.rs b/embassy-nrf/src/qspi.rs index ea0a1703..07a97001 100644 --- a/embassy-nrf/src/qspi.rs +++ b/embassy-nrf/src/qspi.rs @@ -1,3 +1,5 @@ +//! Quad Serial Peripheral Interface (QSPI) flash driver. + #![macro_use] use core::future::poll_fn; @@ -15,6 +17,7 @@ pub use crate::pac::qspi::ifconfig0::{ pub use crate::pac::qspi::ifconfig1::SPIMODE_A as SpiMode; use crate::{pac, Peripheral}; +/// Deep power-down config. pub struct DeepPowerDownConfig { /// Time required for entering DPM, in units of 16us pub enter_time: u16, @@ -22,37 +25,62 @@ pub struct DeepPowerDownConfig { pub exit_time: u16, } +/// QSPI bus frequency. pub enum Frequency { + /// 32 Mhz M32 = 0, + /// 16 Mhz M16 = 1, + /// 10.7 Mhz M10_7 = 2, + /// 8 Mhz M8 = 3, + /// 6.4 Mhz M6_4 = 4, + /// 5.3 Mhz M5_3 = 5, + /// 4.6 Mhz M4_6 = 6, + /// 4 Mhz M4 = 7, + /// 3.6 Mhz M3_6 = 8, + /// 3.2 Mhz M3_2 = 9, + /// 2.9 Mhz M2_9 = 10, + /// 2.7 Mhz M2_7 = 11, + /// 2.5 Mhz M2_5 = 12, + /// 2.3 Mhz M2_3 = 13, + /// 2.1 Mhz M2_1 = 14, + /// 2 Mhz M2 = 15, } +/// QSPI config. #[non_exhaustive] pub struct Config { + /// XIP offset. pub xip_offset: u32, + /// Opcode used for read operations. pub read_opcode: ReadOpcode, + /// Opcode used for write operations. pub write_opcode: WriteOpcode, + /// Page size for write operations. pub write_page_size: WritePageSize, + /// Configuration for deep power down. If None, deep power down is disabled. pub deep_power_down: Option, + /// QSPI bus frequency. pub frequency: Frequency, /// Value is specified in number of 16 MHz periods (62.5 ns) pub sck_delay: u8, /// Whether data is captured on the clock rising edge and data is output on a falling edge (MODE0) or vice-versa (MODE3) pub spi_mode: SpiMode, + /// Addressing mode (24-bit or 32-bit) pub address_mode: AddressMode, } @@ -72,20 +100,24 @@ impl Default for Config { } } +/// Error #[derive(Debug, Copy, Clone, Eq, PartialEq)] #[cfg_attr(feature = "defmt", derive(defmt::Format))] #[non_exhaustive] pub enum Error { + /// Operation address was out of bounds. OutOfBounds, // TODO add "not in data memory" error and check for it } +/// QSPI flash driver. pub struct Qspi<'d, T: Instance, const FLASH_SIZE: usize> { irq: PeripheralRef<'d, T::Interrupt>, dpm_enabled: bool, } impl<'d, T: Instance, const FLASH_SIZE: usize> Qspi<'d, T, FLASH_SIZE> { + /// Create a new QSPI driver. pub fn new( _qspi: impl Peripheral

+ 'd, irq: impl Peripheral

+ 'd, @@ -183,6 +215,7 @@ impl<'d, T: Instance, const FLASH_SIZE: usize> Qspi<'d, T, FLASH_SIZE> { } } + /// Do a custom QSPI instruction. pub async fn custom_instruction(&mut self, opcode: u8, req: &[u8], resp: &mut [u8]) -> Result<(), Error> { let bomb = DropBomb::new(); @@ -198,6 +231,7 @@ impl<'d, T: Instance, const FLASH_SIZE: usize> Qspi<'d, T, FLASH_SIZE> { Ok(()) } + /// Do a custom QSPI instruction, blocking version. pub fn blocking_custom_instruction(&mut self, opcode: u8, req: &[u8], resp: &mut [u8]) -> Result<(), Error> { let len = core::cmp::max(req.len(), resp.len()) as u8; self.custom_instruction_start(opcode, req, len)?; @@ -346,6 +380,7 @@ impl<'d, T: Instance, const FLASH_SIZE: usize> Qspi<'d, T, FLASH_SIZE> { Ok(()) } + /// Read data from the flash memory. pub async fn read(&mut self, address: usize, data: &mut [u8]) -> Result<(), Error> { let bomb = DropBomb::new(); @@ -357,6 +392,7 @@ impl<'d, T: Instance, const FLASH_SIZE: usize> Qspi<'d, T, FLASH_SIZE> { Ok(()) } + /// Write data to the flash memory. pub async fn write(&mut self, address: usize, data: &[u8]) -> Result<(), Error> { let bomb = DropBomb::new(); @@ -368,6 +404,7 @@ impl<'d, T: Instance, const FLASH_SIZE: usize> Qspi<'d, T, FLASH_SIZE> { Ok(()) } + /// Erase a sector on the flash memory. pub async fn erase(&mut self, address: usize) -> Result<(), Error> { let bomb = DropBomb::new(); @@ -379,18 +416,21 @@ impl<'d, T: Instance, const FLASH_SIZE: usize> Qspi<'d, T, FLASH_SIZE> { Ok(()) } + /// Read data from the flash memory, blocking version. pub fn blocking_read(&mut self, address: usize, data: &mut [u8]) -> Result<(), Error> { self.start_read(address, data)?; self.blocking_wait_ready(); Ok(()) } + /// Write data to the flash memory, blocking version. pub fn blocking_write(&mut self, address: usize, data: &[u8]) -> Result<(), Error> { self.start_write(address, data)?; self.blocking_wait_ready(); Ok(()) } + /// Erase a sector on the flash memory, blocking version. pub fn blocking_erase(&mut self, address: usize) -> Result<(), Error> { self.start_erase(address)?; self.blocking_wait_ready(); @@ -547,7 +587,9 @@ pub(crate) mod sealed { } } +/// QSPI peripheral instance. pub trait Instance: Peripheral

+ sealed::Instance + 'static { + /// Interrupt for this peripheral. type Interrupt: Interrupt; } diff --git a/embassy-nrf/src/rng.rs b/embassy-nrf/src/rng.rs index e0caeaae..b0b3a8eb 100644 --- a/embassy-nrf/src/rng.rs +++ b/embassy-nrf/src/rng.rs @@ -1,3 +1,5 @@ +//! Random Number Generator (RNG) driver. + use core::future::poll_fn; use core::ptr; use core::sync::atomic::{AtomicPtr, Ordering}; @@ -128,10 +130,11 @@ impl<'d> Rng<'d> { /// However, this makes the generation of numbers slower. /// /// Defaults to disabled. - pub fn bias_correction(&self, enable: bool) { + pub fn set_bias_correction(&self, enable: bool) { RNG::regs().config.write(|w| w.dercen().bit(enable)) } + /// Fill the buffer with random bytes. pub async fn fill_bytes(&mut self, dest: &mut [u8]) { if dest.len() == 0 { return; // Nothing to fill @@ -175,6 +178,7 @@ impl<'d> Rng<'d> { drop(on_drop); } + /// Fill the buffer with random bytes, blocking version. pub fn blocking_fill_bytes(&mut self, dest: &mut [u8]) { self.start(); diff --git a/embassy-nrf/src/saadc.rs b/embassy-nrf/src/saadc.rs index 4592d468..2d01a3dd 100644 --- a/embassy-nrf/src/saadc.rs +++ b/embassy-nrf/src/saadc.rs @@ -1,3 +1,5 @@ +//! Successive Approximation Analog-to-Digital Converter (SAADC) driver. + #![macro_use] use core::future::poll_fn; @@ -20,6 +22,7 @@ use crate::ppi::{ConfigurableChannel, Event, Ppi, Task}; use crate::timer::{Frequency, Instance as TimerInstance, Timer}; use crate::{interrupt, pac, peripherals, Peripheral}; +/// SAADC error #[derive(Debug, Clone, Copy, PartialEq, Eq)] #[cfg_attr(feature = "defmt", derive(defmt::Format))] #[non_exhaustive] @@ -102,17 +105,17 @@ impl<'d> ChannelConfig<'d> { } } -/// The state of a continuously running sampler. While it reflects -/// the progress of a sampler, it also signals what should be done -/// next. For example, if the sampler has stopped then the Saadc implementation -/// can then tear down its infrastructure. +/// Value returned by the SAADC callback, deciding what happens next. #[derive(PartialEq)] -pub enum SamplerState { - Sampled, - Stopped, +pub enum CallbackResult { + /// The SAADC should keep sampling and calling the callback. + Continue, + /// The SAADC should stop sampling, and return. + Stop, } impl<'d, const N: usize> Saadc<'d, N> { + /// Create a new SAADC driver. pub fn new( saadc: impl Peripheral

+ 'd, irq: impl Peripheral

+ 'd, @@ -285,7 +288,7 @@ impl<'d, const N: usize> Saadc<'d, N> { /// free the buffers from being used by the peripheral. Cancellation will /// also cause the sampling to be stopped. - pub async fn run_task_sampler( + pub async fn run_task_sampler( &mut self, timer: &mut T, ppi_ch1: &mut impl ConfigurableChannel, @@ -293,9 +296,9 @@ impl<'d, const N: usize> Saadc<'d, N> { frequency: Frequency, sample_counter: u32, bufs: &mut [[[i16; N]; N0]; 2], - sampler: S, + callback: F, ) where - S: FnMut(&[[i16; N]]) -> SamplerState, + F: FnMut(&[[i16; N]]) -> CallbackResult, { let r = Self::regs(); @@ -321,20 +324,20 @@ impl<'d, const N: usize> Saadc<'d, N> { || { sample_ppi.enable(); }, - sampler, + callback, ) .await; } - async fn run_sampler( + async fn run_sampler( &mut self, bufs: &mut [[[i16; N]; N0]; 2], sample_rate_divisor: Option, mut init: I, - mut sampler: S, + mut callback: F, ) where I: FnMut(), - S: FnMut(&[[i16; N]]) -> SamplerState, + F: FnMut(&[[i16; N]]) -> CallbackResult, { // In case the future is dropped, stop the task and wait for it to end. let on_drop = OnDrop::new(Self::stop_sampling_immediately); @@ -395,12 +398,15 @@ impl<'d, const N: usize> Saadc<'d, N> { r.events_end.reset(); r.intenset.write(|w| w.end().set()); - if sampler(&bufs[current_buffer]) == SamplerState::Sampled { - let next_buffer = 1 - current_buffer; - current_buffer = next_buffer; - } else { - return Poll::Ready(()); - }; + match callback(&bufs[current_buffer]) { + CallbackResult::Continue => { + let next_buffer = 1 - current_buffer; + current_buffer = next_buffer; + } + CallbackResult::Stop => { + return Poll::Ready(()); + } + } } if r.events_started.read().bits() != 0 { @@ -458,7 +464,7 @@ impl<'d> Saadc<'d, 1> { sample_rate_divisor: u16, sampler: S, ) where - S: FnMut(&[[i16; 1]]) -> SamplerState, + S: FnMut(&[[i16; 1]]) -> CallbackResult, { self.run_sampler(bufs, Some(sample_rate_divisor), || {}, sampler).await; } @@ -658,6 +664,10 @@ pub(crate) mod sealed { /// An input that can be used as either or negative end of a ADC differential in the SAADC periperhal. pub trait Input: sealed::Input + Into + Peripheral

+ Sized + 'static { + /// Convert this SAADC input to a type-erased `AnyInput`. + /// + /// This allows using several inputs in situations that might require + /// them to be the same type, like putting them in an array. fn degrade_saadc(self) -> AnyInput { AnyInput { channel: self.channel(), @@ -665,6 +675,10 @@ pub trait Input: sealed::Input + Into + Peripheral

+ Sized + } } +/// A type-erased SAADC input. +/// +/// This allows using several inputs in situations that might require +/// them to be the same type, like putting them in an array. pub struct AnyInput { channel: InputChannel, } diff --git a/embassy-nrf/src/spim.rs b/embassy-nrf/src/spim.rs index 7bb4e39f..17e43578 100644 --- a/embassy-nrf/src/spim.rs +++ b/embassy-nrf/src/spim.rs @@ -1,3 +1,5 @@ +//! Serial Peripheral Instance in master mode (SPIM) driver. + #![macro_use] use core::future::poll_fn; @@ -16,27 +18,37 @@ use crate::interrupt::{Interrupt, InterruptExt}; use crate::util::{slice_in_ram_or, slice_ptr_parts, slice_ptr_parts_mut}; use crate::{pac, Peripheral}; +/// SPIM error #[derive(Debug, Clone, Copy, PartialEq, Eq)] #[cfg_attr(feature = "defmt", derive(defmt::Format))] #[non_exhaustive] pub enum Error { + /// TX buffer was too long. TxBufferTooLong, + /// RX buffer was too long. RxBufferTooLong, /// EasyDMA can only read from data memory, read only buffers in flash will fail. - DMABufferNotInDataMemory, + BufferNotInRAM, } -/// Interface for the SPIM peripheral using EasyDMA to offload the transmission and reception workload. -/// -/// For more details about EasyDMA, consult the module documentation. +/// SPIM driver. pub struct Spim<'d, T: Instance> { _p: PeripheralRef<'d, T>, } +/// SPIM configuration. #[non_exhaustive] pub struct Config { + /// Frequency pub frequency: Frequency, + + /// SPI mode pub mode: Mode, + + /// Overread character. + /// + /// When doing bidirectional transfers, if the TX buffer is shorter than the RX buffer, + /// this byte will be transmitted in the MOSI line for the left-over bytes. pub orc: u8, } @@ -51,6 +63,7 @@ impl Default for Config { } impl<'d, T: Instance> Spim<'d, T> { + /// Create a new SPIM driver. pub fn new( spim: impl Peripheral

+ 'd, irq: impl Peripheral

+ 'd, @@ -70,6 +83,7 @@ impl<'d, T: Instance> Spim<'d, T> { ) } + /// Create a new SPIM driver, capable of TX only (MOSI only). pub fn new_txonly( spim: impl Peripheral

+ 'd, irq: impl Peripheral

+ 'd, @@ -81,6 +95,7 @@ impl<'d, T: Instance> Spim<'d, T> { Self::new_inner(spim, irq, sck.map_into(), None, Some(mosi.map_into()), config) } + /// Create a new SPIM driver, capable of RX only (MISO only). pub fn new_rxonly( spim: impl Peripheral

+ 'd, irq: impl Peripheral

+ 'd, @@ -194,7 +209,7 @@ impl<'d, T: Instance> Spim<'d, T> { } fn prepare(&mut self, rx: *mut [u8], tx: *const [u8]) -> Result<(), Error> { - slice_in_ram_or(tx, Error::DMABufferNotInDataMemory)?; + slice_in_ram_or(tx, Error::BufferNotInRAM)?; // NOTE: RAM slice check for rx is not necessary, as a mutable // slice can only be built from data located in RAM. @@ -236,7 +251,7 @@ impl<'d, T: Instance> Spim<'d, T> { fn blocking_inner(&mut self, rx: &mut [u8], tx: &[u8]) -> Result<(), Error> { match self.blocking_inner_from_ram(rx, tx) { Ok(_) => Ok(()), - Err(Error::DMABufferNotInDataMemory) => { + Err(Error::BufferNotInRAM) => { trace!("Copying SPIM tx buffer into RAM for DMA"); let tx_ram_buf = &mut [0; FORCE_COPY_BUFFER_SIZE][..tx.len()]; tx_ram_buf.copy_from_slice(tx); @@ -268,7 +283,7 @@ impl<'d, T: Instance> Spim<'d, T> { async fn async_inner(&mut self, rx: &mut [u8], tx: &[u8]) -> Result<(), Error> { match self.async_inner_from_ram(rx, tx).await { Ok(_) => Ok(()), - Err(Error::DMABufferNotInDataMemory) => { + Err(Error::BufferNotInRAM) => { trace!("Copying SPIM tx buffer into RAM for DMA"); let tx_ram_buf = &mut [0; FORCE_COPY_BUFFER_SIZE][..tx.len()]; tx_ram_buf.copy_from_slice(tx); @@ -385,7 +400,9 @@ pub(crate) mod sealed { } } +/// SPIM peripheral instance pub trait Instance: Peripheral

+ sealed::Instance + 'static { + /// Interrupt for this peripheral. type Interrupt: Interrupt; } @@ -437,7 +454,7 @@ mod eh1 { match *self { Self::TxBufferTooLong => embedded_hal_1::spi::ErrorKind::Other, Self::RxBufferTooLong => embedded_hal_1::spi::ErrorKind::Other, - Self::DMABufferNotInDataMemory => embedded_hal_1::spi::ErrorKind::Other, + Self::BufferNotInRAM => embedded_hal_1::spi::ErrorKind::Other, } } } diff --git a/embassy-nrf/src/spis.rs b/embassy-nrf/src/spis.rs index 44af61a1..1b743647 100644 --- a/embassy-nrf/src/spis.rs +++ b/embassy-nrf/src/spis.rs @@ -1,3 +1,5 @@ +//! Serial Peripheral Instance in slave mode (SPIS) driver. + #![macro_use] use core::future::poll_fn; use core::sync::atomic::{compiler_fence, Ordering}; @@ -14,28 +16,43 @@ use crate::interrupt::{Interrupt, InterruptExt}; use crate::util::{slice_in_ram_or, slice_ptr_parts, slice_ptr_parts_mut}; use crate::{pac, Peripheral}; +/// SPIS error #[derive(Debug, Clone, Copy, PartialEq, Eq)] #[cfg_attr(feature = "defmt", derive(defmt::Format))] #[non_exhaustive] pub enum Error { + /// TX buffer was too long. TxBufferTooLong, + /// RX buffer was too long. RxBufferTooLong, /// EasyDMA can only read from data memory, read only buffers in flash will fail. - DMABufferNotInDataMemory, + BufferNotInRAM, } -/// Interface for the SPIS peripheral using EasyDMA to offload the transmission and reception workload. -/// -/// For more details about EasyDMA, consult the module documentation. +/// SPIS driver. pub struct Spis<'d, T: Instance> { _p: PeripheralRef<'d, T>, } +/// SPIS configuration. #[non_exhaustive] pub struct Config { + /// SPI mode pub mode: Mode, + + /// Overread character. + /// + /// If the master keeps clocking the bus after all the bytes in the TX buffer have + /// already been transmitted, this byte will be constantly transmitted in the MISO line. pub orc: u8, + + /// Default byte. + /// + /// This is the byte clocked out in the MISO line for ignored transactions (if the master + /// sets CSN low while the semaphore is owned by the firmware) pub def: u8, + + /// Automatically make the firmware side acquire the semaphore on transfer end. pub auto_acquire: bool, } @@ -51,6 +68,7 @@ impl Default for Config { } impl<'d, T: Instance> Spis<'d, T> { + /// Create a new SPIS driver. pub fn new( spis: impl Peripheral

+ 'd, irq: impl Peripheral

+ 'd, @@ -72,6 +90,7 @@ impl<'d, T: Instance> Spis<'d, T> { ) } + /// Create a new SPIS driver, capable of TX only (MISO only). pub fn new_txonly( spis: impl Peripheral

+ 'd, irq: impl Peripheral

+ 'd, @@ -92,6 +111,7 @@ impl<'d, T: Instance> Spis<'d, T> { ) } + /// Create a new SPIS driver, capable of RX only (MOSI only). pub fn new_rxonly( spis: impl Peripheral

+ 'd, irq: impl Peripheral

+ 'd, @@ -212,7 +232,7 @@ impl<'d, T: Instance> Spis<'d, T> { } fn prepare(&mut self, rx: *mut [u8], tx: *const [u8]) -> Result<(), Error> { - slice_in_ram_or(tx, Error::DMABufferNotInDataMemory)?; + slice_in_ram_or(tx, Error::BufferNotInRAM)?; // NOTE: RAM slice check for rx is not necessary, as a mutable // slice can only be built from data located in RAM. @@ -267,7 +287,7 @@ impl<'d, T: Instance> Spis<'d, T> { fn blocking_inner(&mut self, rx: &mut [u8], tx: &[u8]) -> Result<(usize, usize), Error> { match self.blocking_inner_from_ram(rx, tx) { Ok(n) => Ok(n), - Err(Error::DMABufferNotInDataMemory) => { + Err(Error::BufferNotInRAM) => { trace!("Copying SPIS tx buffer into RAM for DMA"); let tx_ram_buf = &mut [0; FORCE_COPY_BUFFER_SIZE][..tx.len()]; tx_ram_buf.copy_from_slice(tx); @@ -330,7 +350,7 @@ impl<'d, T: Instance> Spis<'d, T> { async fn async_inner(&mut self, rx: &mut [u8], tx: &[u8]) -> Result<(usize, usize), Error> { match self.async_inner_from_ram(rx, tx).await { Ok(n) => Ok(n), - Err(Error::DMABufferNotInDataMemory) => { + Err(Error::BufferNotInRAM) => { trace!("Copying SPIS tx buffer into RAM for DMA"); let tx_ram_buf = &mut [0; FORCE_COPY_BUFFER_SIZE][..tx.len()]; tx_ram_buf.copy_from_slice(tx); @@ -468,7 +488,9 @@ pub(crate) mod sealed { } } +/// SPIS peripheral instance pub trait Instance: Peripheral

+ sealed::Instance + 'static { + /// Interrupt for this peripheral. type Interrupt: Interrupt; } diff --git a/embassy-nrf/src/temp.rs b/embassy-nrf/src/temp.rs index 7a7f61b5..5298faab 100644 --- a/embassy-nrf/src/temp.rs +++ b/embassy-nrf/src/temp.rs @@ -1,4 +1,4 @@ -//! Temperature sensor interface. +//! Builtin temperature sensor driver. use core::future::poll_fn; use core::task::Poll; @@ -12,7 +12,7 @@ use crate::interrupt::InterruptExt; use crate::peripherals::TEMP; use crate::{interrupt, pac, Peripheral}; -/// Integrated temperature sensor. +/// Builtin temperature sensor driver. pub struct Temp<'d> { _irq: PeripheralRef<'d, interrupt::TEMP>, } @@ -20,6 +20,7 @@ pub struct Temp<'d> { static WAKER: AtomicWaker = AtomicWaker::new(); impl<'d> Temp<'d> { + /// Create a new temperature sensor driver. pub fn new(_t: impl Peripheral

+ 'd, irq: impl Peripheral

+ 'd) -> Self { into_ref!(_t, irq); diff --git a/embassy-nrf/src/timer.rs b/embassy-nrf/src/timer.rs index bc871064..d1ae5723 100644 --- a/embassy-nrf/src/timer.rs +++ b/embassy-nrf/src/timer.rs @@ -1,3 +1,9 @@ +//! Timer driver. +//! +//! Important note! This driver is very low level. For most time-related use cases, like +//! "sleep for X seconds", "do something every X seconds", or measuring time, you should +//! use [`embassy-time`](https://crates.io/crates/embassy-time) instead! + #![macro_use] use core::future::poll_fn; @@ -28,9 +34,13 @@ pub(crate) mod sealed { pub trait TimerType {} } +/// Basic Timer instance. pub trait Instance: Peripheral

+ sealed::Instance + 'static + Send { + /// Interrupt for this peripheral. type Interrupt: Interrupt; } + +/// Extended timer instance. pub trait ExtendedInstance: Instance + sealed::ExtendedInstance {} macro_rules! impl_timer { @@ -61,18 +71,28 @@ macro_rules! impl_timer { }; } +/// Timer frequency #[repr(u8)] pub enum Frequency { - // I'd prefer not to prefix these with `F`, but Rust identifiers can't start with digits. + /// 16MHz F16MHz = 0, + /// 8MHz F8MHz = 1, + /// 4MHz F4MHz = 2, + /// 2MHz F2MHz = 3, + /// 1MHz F1MHz = 4, + /// 500kHz F500kHz = 5, + /// 250kHz F250kHz = 6, + /// 125kHz F125kHz = 7, + /// 62500Hz F62500Hz = 8, + /// 31250Hz F31250Hz = 9, } @@ -86,7 +106,10 @@ pub enum Frequency { pub trait TimerType: sealed::TimerType {} +/// Marker type indicating the timer driver can await expiration (it owns the timer interrupt). pub enum Awaitable {} + +/// Marker type indicating the timer driver cannot await expiration (it does not own the timer interrupt). pub enum NotAwaitable {} impl sealed::TimerType for Awaitable {} @@ -94,12 +117,14 @@ impl sealed::TimerType for NotAwaitable {} impl TimerType for Awaitable {} impl TimerType for NotAwaitable {} +/// Timer driver. pub struct Timer<'d, T: Instance, I: TimerType = NotAwaitable> { _p: PeripheralRef<'d, T>, _i: PhantomData, } impl<'d, T: Instance> Timer<'d, T, Awaitable> { + /// Create a new async-capable timer driver. pub fn new_awaitable(timer: impl Peripheral

+ 'd, irq: impl Peripheral

+ 'd) -> Self { into_ref!(irq); @@ -107,16 +132,17 @@ impl<'d, T: Instance> Timer<'d, T, Awaitable> { irq.unpend(); irq.enable(); - Self::new_irqless(timer) + Self::new_inner(timer) } } + impl<'d, T: Instance> Timer<'d, T, NotAwaitable> { - /// Create a `Timer` without an interrupt, meaning `Cc::wait` won't work. + /// Create a `Timer` driver without an interrupt, meaning `Cc::wait` won't work. /// /// This can be useful for triggering tasks via PPI /// `Uarte` uses this internally. pub fn new(timer: impl Peripheral

+ 'd) -> Self { - Self::new_irqless(timer) + Self::new_inner(timer) } } @@ -124,7 +150,7 @@ impl<'d, T: Instance, I: TimerType> Timer<'d, T, I> { /// Create a `Timer` without an interrupt, meaning `Cc::wait` won't work. /// /// This is used by the public constructors. - fn new_irqless(timer: impl Peripheral

+ 'd) -> Self { + fn new_inner(timer: impl Peripheral

+ 'd) -> Self { into_ref!(timer); let regs = T::regs(); diff --git a/embassy-nrf/src/twim.rs b/embassy-nrf/src/twim.rs index 4eafd18c..0dcb2b0d 100644 --- a/embassy-nrf/src/twim.rs +++ b/embassy-nrf/src/twim.rs @@ -1,11 +1,7 @@ +//! I2C-compatible Two Wire Interface in master mode (TWIM) driver. + #![macro_use] -//! HAL interface to the TWIM peripheral. -//! -//! See product specification: -//! -//! - nRF52832: Section 33 -//! - nRF52840: Section 6.31 use core::future::{poll_fn, Future}; use core::sync::atomic::compiler_fence; use core::sync::atomic::Ordering::SeqCst; @@ -23,22 +19,39 @@ use crate::interrupt::{Interrupt, InterruptExt}; use crate::util::{slice_in_ram, slice_in_ram_or}; use crate::{gpio, pac, Peripheral}; +/// TWI frequency #[derive(Clone, Copy)] pub enum Frequency { - #[doc = "26738688: 100 kbps"] + /// 100 kbps K100 = 26738688, - #[doc = "67108864: 250 kbps"] + /// 250 kbps K250 = 67108864, - #[doc = "104857600: 400 kbps"] + /// 400 kbps K400 = 104857600, } +/// TWIM config. #[non_exhaustive] pub struct Config { + /// Frequency pub frequency: Frequency, + + /// Enable high drive for the SDA line. pub sda_high_drive: bool, + + /// Enable internal pullup for the SDA line. + /// + /// Note that using external pullups is recommended for I2C, and + /// most boards already have them. pub sda_pullup: bool, + + /// Enable high drive for the SCL line. pub scl_high_drive: bool, + + /// Enable internal pullup for the SCL line. + /// + /// Note that using external pullups is recommended for I2C, and + /// most boards already have them. pub scl_pullup: bool, } @@ -54,29 +67,38 @@ impl Default for Config { } } +/// TWI error. #[derive(Debug, Copy, Clone, Eq, PartialEq)] #[cfg_attr(feature = "defmt", derive(defmt::Format))] #[non_exhaustive] pub enum Error { + /// TX buffer was too long. TxBufferTooLong, + /// RX buffer was too long. RxBufferTooLong, + /// Data transmit failed. Transmit, + /// Data reception failed. Receive, - DMABufferNotInDataMemory, + /// The buffer is not in data RAM. It's most likely in flash, and nRF's DMA cannot access flash. + BufferNotInRAM, + /// Didn't receive an ACK bit after the address byte. Address might be wrong, or the i2c device chip might not be connected properly. AddressNack, + /// Didn't receive an ACK bit after a data byte. DataNack, + /// Overrun error. Overrun, + /// Timeout error. Timeout, } -/// Interface to a TWIM instance using EasyDMA to offload the transmission and reception workload. -/// -/// For more details about EasyDMA, consult the module documentation. +/// TWI driver. pub struct Twim<'d, T: Instance> { _p: PeripheralRef<'d, T>, } impl<'d, T: Instance> Twim<'d, T> { + /// Create a new TWI driver. pub fn new( twim: impl Peripheral

+ 'd, irq: impl Peripheral

+ 'd, @@ -153,7 +175,7 @@ impl<'d, T: Instance> Twim<'d, T> { /// Set TX buffer, checking that it is in RAM and has suitable length. unsafe fn set_tx_buffer(&mut self, buffer: &[u8]) -> Result<(), Error> { - slice_in_ram_or(buffer, Error::DMABufferNotInDataMemory)?; + slice_in_ram_or(buffer, Error::BufferNotInRAM)?; if buffer.len() > EASY_DMA_SIZE { return Err(Error::TxBufferTooLong); @@ -233,7 +255,7 @@ impl<'d, T: Instance> Twim<'d, T> { return Err(Error::DataNack); } if err.overrun().is_received() { - return Err(Error::DataNack); + return Err(Error::Overrun); } Ok(()) } @@ -435,7 +457,7 @@ impl<'d, T: Instance> Twim<'d, T> { ) -> Result<(), Error> { match self.setup_write_read_from_ram(address, wr_buffer, rd_buffer, inten) { Ok(_) => Ok(()), - Err(Error::DMABufferNotInDataMemory) => { + Err(Error::BufferNotInRAM) => { trace!("Copying TWIM tx buffer into RAM for DMA"); let tx_ram_buf = &mut [0; FORCE_COPY_BUFFER_SIZE][..wr_buffer.len()]; tx_ram_buf.copy_from_slice(wr_buffer); @@ -448,7 +470,7 @@ impl<'d, T: Instance> Twim<'d, T> { fn setup_write(&mut self, address: u8, wr_buffer: &[u8], inten: bool) -> Result<(), Error> { match self.setup_write_from_ram(address, wr_buffer, inten) { Ok(_) => Ok(()), - Err(Error::DMABufferNotInDataMemory) => { + Err(Error::BufferNotInRAM) => { trace!("Copying TWIM tx buffer into RAM for DMA"); let tx_ram_buf = &mut [0; FORCE_COPY_BUFFER_SIZE][..wr_buffer.len()]; tx_ram_buf.copy_from_slice(wr_buffer); @@ -612,6 +634,10 @@ impl<'d, T: Instance> Twim<'d, T> { // =========================================== + /// Read from an I2C slave. + /// + /// The buffer must have a length of at most 255 bytes on the nRF52832 + /// and at most 65535 bytes on the nRF52840. pub async fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Error> { self.setup_read(address, buffer, true)?; self.async_wait().await; @@ -621,6 +647,10 @@ impl<'d, T: Instance> Twim<'d, T> { Ok(()) } + /// Write to an I2C slave. + /// + /// The buffer must have a length of at most 255 bytes on the nRF52832 + /// and at most 65535 bytes on the nRF52840. pub async fn write(&mut self, address: u8, buffer: &[u8]) -> Result<(), Error> { self.setup_write(address, buffer, true)?; self.async_wait().await; @@ -640,6 +670,11 @@ impl<'d, T: Instance> Twim<'d, T> { Ok(()) } + /// Write data to an I2C slave, then read data from the slave without + /// triggering a stop condition between the two. + /// + /// The buffers must have a length of at most 255 bytes on the nRF52832 + /// and at most 65535 bytes on the nRF52840. pub async fn write_read(&mut self, address: u8, wr_buffer: &[u8], rd_buffer: &mut [u8]) -> Result<(), Error> { self.setup_write_read(address, wr_buffer, rd_buffer, true)?; self.async_wait().await; @@ -705,7 +740,9 @@ pub(crate) mod sealed { } } +/// TWIM peripheral instance. pub trait Instance: Peripheral

+ sealed::Instance + 'static { + /// Interrupt for this peripheral. type Interrupt: Interrupt; } @@ -776,7 +813,7 @@ mod eh1 { Self::RxBufferTooLong => embedded_hal_1::i2c::ErrorKind::Other, Self::Transmit => embedded_hal_1::i2c::ErrorKind::Other, Self::Receive => embedded_hal_1::i2c::ErrorKind::Other, - Self::DMABufferNotInDataMemory => embedded_hal_1::i2c::ErrorKind::Other, + Self::BufferNotInRAM => embedded_hal_1::i2c::ErrorKind::Other, Self::AddressNack => { embedded_hal_1::i2c::ErrorKind::NoAcknowledge(embedded_hal_1::i2c::NoAcknowledgeSource::Address) } diff --git a/embassy-nrf/src/twis.rs b/embassy-nrf/src/twis.rs index 4091b017..51a70c30 100644 --- a/embassy-nrf/src/twis.rs +++ b/embassy-nrf/src/twis.rs @@ -1,11 +1,7 @@ +//! I2C-compatible Two Wire Interface in slave mode (TWIM) driver. + #![macro_use] -//! HAL interface to the TWIS peripheral. -//! -//! See product specification: -//! -//! - nRF52832: Section 33 -//! - nRF52840: Section 6.31 use core::future::{poll_fn, Future}; use core::sync::atomic::compiler_fence; use core::sync::atomic::Ordering::SeqCst; @@ -22,14 +18,37 @@ use crate::interrupt::{Interrupt, InterruptExt}; use crate::util::slice_in_ram_or; use crate::{gpio, pac, Peripheral}; +/// TWIS config. #[non_exhaustive] pub struct Config { + /// First address pub address0: u8, + + /// Second address, optional. pub address1: Option, + + /// Overread character. + /// + /// If the master keeps clocking the bus after all the bytes in the TX buffer have + /// already been transmitted, this byte will be constantly transmitted. pub orc: u8, + + /// Enable high drive for the SDA line. pub sda_high_drive: bool, + + /// Enable internal pullup for the SDA line. + /// + /// Note that using external pullups is recommended for I2C, and + /// most boards already have them. pub sda_pullup: bool, + + /// Enable high drive for the SCL line. pub scl_high_drive: bool, + + /// Enable internal pullup for the SCL line. + /// + /// Note that using external pullups is recommended for I2C, and + /// most boards already have them. pub scl_pullup: bool, } @@ -54,36 +73,48 @@ enum Status { Write, } +/// TWIS error. #[derive(Debug, Copy, Clone, Eq, PartialEq)] #[cfg_attr(feature = "defmt", derive(defmt::Format))] #[non_exhaustive] pub enum Error { + /// TX buffer was too long. TxBufferTooLong, + /// TX buffer was too long. RxBufferTooLong, + /// Didn't receive an ACK bit after a data byte. DataNack, + /// Bus error. Bus, - DMABufferNotInDataMemory, + /// The buffer is not in data RAM. It's most likely in flash, and nRF's DMA cannot access flash. + BufferNotInRAM, + /// Overflow Overflow, + /// Overread OverRead, + /// Timeout Timeout, } +/// Received command #[derive(Debug, Copy, Clone, Eq, PartialEq)] #[cfg_attr(feature = "defmt", derive(defmt::Format))] pub enum Command { + /// Read Read, + /// Write+read WriteRead(usize), + /// Write Write(usize), } -/// Interface to a TWIS instance using EasyDMA to offload the transmission and reception workload. -/// -/// For more details about EasyDMA, consult the module documentation. +/// TWIS driver. pub struct Twis<'d, T: Instance> { _p: PeripheralRef<'d, T>, } impl<'d, T: Instance> Twis<'d, T> { + /// Create a new TWIS driver. pub fn new( twis: impl Peripheral

+ 'd, irq: impl Peripheral

+ 'd, @@ -174,7 +205,7 @@ impl<'d, T: Instance> Twis<'d, T> { /// Set TX buffer, checking that it is in RAM and has suitable length. unsafe fn set_tx_buffer(&mut self, buffer: &[u8]) -> Result<(), Error> { - slice_in_ram_or(buffer, Error::DMABufferNotInDataMemory)?; + slice_in_ram_or(buffer, Error::BufferNotInRAM)?; if buffer.len() > EASY_DMA_SIZE { return Err(Error::TxBufferTooLong); @@ -535,7 +566,7 @@ impl<'d, T: Instance> Twis<'d, T> { fn setup_respond(&mut self, wr_buffer: &[u8], inten: bool) -> Result<(), Error> { match self.setup_respond_from_ram(wr_buffer, inten) { Ok(_) => Ok(()), - Err(Error::DMABufferNotInDataMemory) => { + Err(Error::BufferNotInRAM) => { trace!("Copying TWIS tx buffer into RAM for DMA"); let tx_ram_buf = &mut [0; FORCE_COPY_BUFFER_SIZE][..wr_buffer.len()]; tx_ram_buf.copy_from_slice(wr_buffer); @@ -737,7 +768,9 @@ pub(crate) mod sealed { } } +/// TWIS peripheral instance. pub trait Instance: Peripheral

+ sealed::Instance + 'static { + /// Interrupt for this peripheral. type Interrupt: Interrupt; } diff --git a/embassy-nrf/src/uarte.rs b/embassy-nrf/src/uarte.rs index 031cf82f..48457744 100644 --- a/embassy-nrf/src/uarte.rs +++ b/embassy-nrf/src/uarte.rs @@ -1,8 +1,6 @@ -#![macro_use] - -//! Async UART +//! Universal Asynchronous Receiver Transmitter (UART) driver. //! -//! Async UART is provided in two flavors - this one and also [crate::buffered_uarte::BufferedUarte]. +//! The UART driver is provided in two flavors - this one and also [crate::buffered_uarte::BufferedUarte]. //! The [Uarte] here is useful for those use-cases where reading the UARTE peripheral is //! exclusively awaited on. If the [Uarte] is required to be awaited on with some other future, //! for example when using `futures_util::future::select`, then you should consider @@ -13,6 +11,8 @@ //! memory may be used given that buffers are passed in directly to its read and write //! methods. +#![macro_use] + use core::future::poll_fn; use core::sync::atomic::{compiler_fence, Ordering}; use core::task::Poll; @@ -32,10 +32,13 @@ use crate::timer::{Frequency, Instance as TimerInstance, Timer}; use crate::util::slice_in_ram_or; use crate::{pac, Peripheral}; +/// UARTE config. #[derive(Clone)] #[non_exhaustive] pub struct Config { + /// Parity bit. pub parity: Parity, + /// Baud rate. pub baudrate: Baudrate, } @@ -48,31 +51,33 @@ impl Default for Config { } } +/// UART error. #[derive(Debug, Clone, Copy, PartialEq, Eq)] #[cfg_attr(feature = "defmt", derive(defmt::Format))] #[non_exhaustive] pub enum Error { + /// Buffer was too long. BufferTooLong, - DMABufferNotInDataMemory, - // TODO: add other error variants. + /// The buffer is not in data RAM. It's most likely in flash, and nRF's DMA cannot access flash. + BufferNotInRAM, } -/// Interface to the UARTE peripheral using EasyDMA to offload the transmission and reception workload. -/// -/// For more details about EasyDMA, consult the module documentation. +/// UARTE driver. pub struct Uarte<'d, T: Instance> { tx: UarteTx<'d, T>, rx: UarteRx<'d, T>, } -/// Transmitter interface to the UARTE peripheral obtained -/// via [Uarte]::split. +/// Transmitter part of the UARTE driver. +/// +/// This can be obtained via [`Uarte::split`], or created directly. pub struct UarteTx<'d, T: Instance> { _p: PeripheralRef<'d, T>, } -/// Receiver interface to the UARTE peripheral obtained -/// via [Uarte]::split. +/// Receiver part of the UARTE driver. +/// +/// This can be obtained via [`Uarte::split`], or created directly. pub struct UarteRx<'d, T: Instance> { _p: PeripheralRef<'d, T>, } @@ -165,16 +170,16 @@ impl<'d, T: Instance> Uarte<'d, T> { } } - /// Split the Uarte into a transmitter and receiver, which is - /// particularly useful when having two tasks correlating to - /// transmitting and receiving. + /// Split the Uarte into the transmitter and receiver parts. + /// + /// This is useful to concurrently transmit and receive from independent tasks. pub fn split(self) -> (UarteTx<'d, T>, UarteRx<'d, T>) { (self.tx, self.rx) } - /// Split the Uarte into a transmitter and receiver that will - /// return on idle, which is determined as the time it takes - /// for two bytes to be received. + /// Split the Uarte into the transmitter and receiver with idle support parts. + /// + /// This is useful to concurrently transmit and receive from independent tasks. pub fn split_with_idle( self, timer: impl Peripheral

+ 'd, @@ -247,10 +252,12 @@ impl<'d, T: Instance> Uarte<'d, T> { } } + /// Read bytes until the buffer is filled. pub async fn read(&mut self, buffer: &mut [u8]) -> Result<(), Error> { self.rx.read(buffer).await } + /// Write all bytes in the buffer. pub async fn write(&mut self, buffer: &[u8]) -> Result<(), Error> { self.tx.write(buffer).await } @@ -260,10 +267,12 @@ impl<'d, T: Instance> Uarte<'d, T> { self.tx.write_from_ram(buffer).await } + /// Read bytes until the buffer is filled. pub fn blocking_read(&mut self, buffer: &mut [u8]) -> Result<(), Error> { self.rx.blocking_read(buffer) } + /// Write all bytes in the buffer. pub fn blocking_write(&mut self, buffer: &[u8]) -> Result<(), Error> { self.tx.blocking_write(buffer) } @@ -355,10 +364,11 @@ impl<'d, T: Instance> UarteTx<'d, T> { Self { _p: uarte } } + /// Write all bytes in the buffer. pub async fn write(&mut self, buffer: &[u8]) -> Result<(), Error> { match self.write_from_ram(buffer).await { Ok(_) => Ok(()), - Err(Error::DMABufferNotInDataMemory) => { + Err(Error::BufferNotInRAM) => { trace!("Copying UARTE tx buffer into RAM for DMA"); let ram_buf = &mut [0; FORCE_COPY_BUFFER_SIZE][..buffer.len()]; ram_buf.copy_from_slice(buffer); @@ -368,12 +378,13 @@ impl<'d, T: Instance> UarteTx<'d, T> { } } + /// Same as [`write`](Self::write) but will fail instead of copying data into RAM. Consult the module level documentation to learn more. pub async fn write_from_ram(&mut self, buffer: &[u8]) -> Result<(), Error> { if buffer.len() == 0 { return Ok(()); } - slice_in_ram_or(buffer, Error::DMABufferNotInDataMemory)?; + slice_in_ram_or(buffer, Error::BufferNotInRAM)?; if buffer.len() > EASY_DMA_SIZE { return Err(Error::BufferTooLong); } @@ -423,10 +434,11 @@ impl<'d, T: Instance> UarteTx<'d, T> { Ok(()) } + /// Write all bytes in the buffer. pub fn blocking_write(&mut self, buffer: &[u8]) -> Result<(), Error> { match self.blocking_write_from_ram(buffer) { Ok(_) => Ok(()), - Err(Error::DMABufferNotInDataMemory) => { + Err(Error::BufferNotInRAM) => { trace!("Copying UARTE tx buffer into RAM for DMA"); let ram_buf = &mut [0; FORCE_COPY_BUFFER_SIZE][..buffer.len()]; ram_buf.copy_from_slice(buffer); @@ -436,12 +448,13 @@ impl<'d, T: Instance> UarteTx<'d, T> { } } + /// Same as [`write_from_ram`](Self::write_from_ram) but will fail instead of copying data into RAM. Consult the module level documentation to learn more. pub fn blocking_write_from_ram(&mut self, buffer: &[u8]) -> Result<(), Error> { if buffer.len() == 0 { return Ok(()); } - slice_in_ram_or(buffer, Error::DMABufferNotInDataMemory)?; + slice_in_ram_or(buffer, Error::BufferNotInRAM)?; if buffer.len() > EASY_DMA_SIZE { return Err(Error::BufferTooLong); } @@ -549,6 +562,7 @@ impl<'d, T: Instance> UarteRx<'d, T> { Self { _p: uarte } } + /// Read bytes until the buffer is filled. pub async fn read(&mut self, buffer: &mut [u8]) -> Result<(), Error> { if buffer.len() == 0 { return Ok(()); @@ -602,6 +616,7 @@ impl<'d, T: Instance> UarteRx<'d, T> { Ok(()) } + /// Read bytes until the buffer is filled. pub fn blocking_read(&mut self, buffer: &mut [u8]) -> Result<(), Error> { if buffer.len() == 0 { return Ok(()); @@ -653,6 +668,9 @@ impl<'a, T: Instance> Drop for UarteRx<'a, T> { } } +/// Receiver part of the UARTE driver, with `read_until_idle` support. +/// +/// This can be obtained via [`Uarte::split_with_idle`]. pub struct UarteRxWithIdle<'d, T: Instance, U: TimerInstance> { rx: UarteRx<'d, T>, timer: Timer<'d, U>, @@ -661,16 +679,21 @@ pub struct UarteRxWithIdle<'d, T: Instance, U: TimerInstance> { } impl<'d, T: Instance, U: TimerInstance> UarteRxWithIdle<'d, T, U> { + /// Read bytes until the buffer is filled. pub async fn read(&mut self, buffer: &mut [u8]) -> Result<(), Error> { self.ppi_ch1.disable(); self.rx.read(buffer).await } + /// Read bytes until the buffer is filled. pub fn blocking_read(&mut self, buffer: &mut [u8]) -> Result<(), Error> { self.ppi_ch1.disable(); self.rx.blocking_read(buffer) } + /// Read bytes until the buffer is filled, or the line becomes idle. + /// + /// Returns the amount of bytes read. pub async fn read_until_idle(&mut self, buffer: &mut [u8]) -> Result { if buffer.len() == 0 { return Ok(0); @@ -727,6 +750,9 @@ impl<'d, T: Instance, U: TimerInstance> UarteRxWithIdle<'d, T, U> { Ok(n) } + /// Read bytes until the buffer is filled, or the line becomes idle. + /// + /// Returns the amount of bytes read. pub fn blocking_read_until_idle(&mut self, buffer: &mut [u8]) -> Result { if buffer.len() == 0 { return Ok(0); @@ -860,7 +886,9 @@ pub(crate) mod sealed { } } +/// UARTE peripheral instance. pub trait Instance: Peripheral

+ sealed::Instance + 'static + Send { + /// Interrupt for this peripheral. type Interrupt: Interrupt; } @@ -919,7 +947,7 @@ mod eh1 { fn kind(&self) -> embedded_hal_1::serial::ErrorKind { match *self { Self::BufferTooLong => embedded_hal_1::serial::ErrorKind::Other, - Self::DMABufferNotInDataMemory => embedded_hal_1::serial::ErrorKind::Other, + Self::BufferNotInRAM => embedded_hal_1::serial::ErrorKind::Other, } } } diff --git a/embassy-nrf/src/usb.rs b/embassy-nrf/src/usb.rs index f030b909..cd142f00 100644 --- a/embassy-nrf/src/usb.rs +++ b/embassy-nrf/src/usb.rs @@ -1,3 +1,5 @@ +//! Universal Serial Bus (USB) driver. + #![macro_use] use core::future::poll_fn; @@ -24,38 +26,38 @@ static EP_IN_WAKERS: [AtomicWaker; 8] = [NEW_AW; 8]; static EP_OUT_WAKERS: [AtomicWaker; 8] = [NEW_AW; 8]; static READY_ENDPOINTS: AtomicU32 = AtomicU32::new(0); +/// Trait for detecting USB VBUS power. +/// /// There are multiple ways to detect USB power. The behavior /// here provides a hook into determining whether it is. -pub trait UsbSupply { +pub trait VbusDetect { + /// Report whether power is detected. + /// + /// This is indicated by the `USBREGSTATUS.VBUSDETECT` register, or the + /// `USBDETECTED`, `USBREMOVED` events from the `POWER` peripheral. fn is_usb_detected(&self) -> bool; + + /// Wait until USB power is ready. + /// + /// USB power ready is indicated by the `USBREGSTATUS.OUTPUTRDY` register, or the + /// `USBPWRRDY` event from the `POWER` peripheral. async fn wait_power_ready(&mut self) -> Result<(), ()>; } -pub struct Driver<'d, T: Instance, P: UsbSupply> { - _p: PeripheralRef<'d, T>, - alloc_in: Allocator, - alloc_out: Allocator, - usb_supply: P, -} - -/// Uses the POWER peripheral to detect when power is available -/// for USB. Unsuitable for usage with the nRF softdevice. +/// [`VbusDetect`] implementation using the native hardware POWER peripheral. +/// +/// Unsuitable for usage with the nRF softdevice, since it reserves exclusive acces +/// to POWER. In that case, use [`VbusDetectSignal`]. #[cfg(not(feature = "_nrf5340-app"))] -pub struct PowerUsb { +pub struct HardwareVbusDetect { _private: (), } -/// Can be used to signal that power is available. Particularly suited for -/// use with the nRF softdevice. -pub struct SignalledSupply { - usb_detected: AtomicBool, - power_ready: AtomicBool, -} - static POWER_WAKER: AtomicWaker = NEW_AW; #[cfg(not(feature = "_nrf5340-app"))] -impl PowerUsb { +impl HardwareVbusDetect { + /// Create a new `VbusDetectNative`. pub fn new(power_irq: impl Interrupt) -> Self { let regs = unsafe { &*pac::POWER::ptr() }; @@ -92,7 +94,7 @@ impl PowerUsb { } #[cfg(not(feature = "_nrf5340-app"))] -impl UsbSupply for PowerUsb { +impl VbusDetect for HardwareVbusDetect { fn is_usb_detected(&self) -> bool { let regs = unsafe { &*pac::POWER::ptr() }; regs.usbregstatus.read().vbusdetect().is_vbus_present() @@ -115,7 +117,20 @@ impl UsbSupply for PowerUsb { } } -impl SignalledSupply { +/// Software-backed [`VbusDetect`] implementation. +/// +/// This implementation does not interact with the hardware, it allows user code +/// to notify the power events by calling functions instead. +/// +/// This is suitable for use with the nRF softdevice, by calling the functions +/// when the softdevice reports power-related events. +pub struct SoftwareVbusDetect { + usb_detected: AtomicBool, + power_ready: AtomicBool, +} + +impl SoftwareVbusDetect { + /// Create a new `SoftwareVbusDetect`. pub fn new(usb_detected: bool, power_ready: bool) -> Self { BUS_WAKER.wake(); @@ -125,6 +140,9 @@ impl SignalledSupply { } } + /// Report whether power was detected. + /// + /// Equivalent to the `USBDETECTED`, `USBREMOVED` events from the `POWER` peripheral. pub fn detected(&self, detected: bool) { self.usb_detected.store(detected, Ordering::Relaxed); self.power_ready.store(false, Ordering::Relaxed); @@ -132,13 +150,16 @@ impl SignalledSupply { POWER_WAKER.wake(); } + /// Report when USB power is ready. + /// + /// Equivalent to the `USBPWRRDY` event from the `POWER` peripheral. pub fn ready(&self) { self.power_ready.store(true, Ordering::Relaxed); POWER_WAKER.wake(); } } -impl UsbSupply for &SignalledSupply { +impl VbusDetect for &SoftwareVbusDetect { fn is_usb_detected(&self) -> bool { self.usb_detected.load(Ordering::Relaxed) } @@ -159,7 +180,16 @@ impl UsbSupply for &SignalledSupply { } } -impl<'d, T: Instance, P: UsbSupply> Driver<'d, T, P> { +/// USB driver. +pub struct Driver<'d, T: Instance, P: VbusDetect> { + _p: PeripheralRef<'d, T>, + alloc_in: Allocator, + alloc_out: Allocator, + usb_supply: P, +} + +impl<'d, T: Instance, P: VbusDetect> Driver<'d, T, P> { + /// Create a new USB driver. pub fn new(usb: impl Peripheral

+ 'd, irq: impl Peripheral

+ 'd, usb_supply: P) -> Self { into_ref!(usb, irq); irq.set_handler(Self::on_interrupt); @@ -225,7 +255,7 @@ impl<'d, T: Instance, P: UsbSupply> Driver<'d, T, P> { } } -impl<'d, T: Instance, P: UsbSupply + 'd> driver::Driver<'d> for Driver<'d, T, P> { +impl<'d, T: Instance, P: VbusDetect + 'd> driver::Driver<'d> for Driver<'d, T, P> { type EndpointOut = Endpoint<'d, T, Out>; type EndpointIn = Endpoint<'d, T, In>; type ControlPipe = ControlPipe<'d, T>; @@ -278,13 +308,14 @@ impl<'d, T: Instance, P: UsbSupply + 'd> driver::Driver<'d> for Driver<'d, T, P> } } -pub struct Bus<'d, T: Instance, P: UsbSupply> { +/// USB bus. +pub struct Bus<'d, T: Instance, P: VbusDetect> { _p: PeripheralRef<'d, T>, power_available: bool, usb_supply: P, } -impl<'d, T: Instance, P: UsbSupply> driver::Bus for Bus<'d, T, P> { +impl<'d, T: Instance, P: VbusDetect> driver::Bus for Bus<'d, T, P> { async fn enable(&mut self) { let regs = T::regs(); @@ -513,7 +544,10 @@ impl<'d, T: Instance, P: UsbSupply> driver::Bus for Bus<'d, T, P> { } } +/// Type-level marker for OUT endpoints. pub enum Out {} + +/// Type-level marker for IN endpoints. pub enum In {} trait EndpointDir { @@ -556,6 +590,7 @@ impl EndpointDir for Out { } } +/// USB endpoint. pub struct Endpoint<'d, T: Instance, Dir> { _phantom: PhantomData<(&'d mut T, Dir)>, info: EndpointInfo, @@ -715,6 +750,7 @@ impl<'d, T: Instance> driver::EndpointIn for Endpoint<'d, T, In> { } } +/// USB control pipe. pub struct ControlPipe<'d, T: Instance> { _p: PeripheralRef<'d, T>, max_packet_size: u16, @@ -905,7 +941,9 @@ pub(crate) mod sealed { } } +/// USB peripheral instance. pub trait Instance: Peripheral

+ sealed::Instance + 'static + Send { + /// Interrupt for this peripheral. type Interrupt: Interrupt; } diff --git a/embassy-nrf/src/wdt.rs b/embassy-nrf/src/wdt.rs index 330ca98b..40a67442 100644 --- a/embassy-nrf/src/wdt.rs +++ b/embassy-nrf/src/wdt.rs @@ -1,4 +1,4 @@ -//! HAL interface to the WDT peripheral. +//! Watchdog Timer (WDT) driver. //! //! This HAL implements a basic watchdog timer with 1..=8 handles. //! Once the watchdog has been started, it cannot be stopped. @@ -8,6 +8,7 @@ use crate::peripherals; const MIN_TICKS: u32 = 15; +/// WDT configuration. #[non_exhaustive] pub struct Config { /// Number of 32768 Hz ticks in each watchdog period. @@ -57,13 +58,13 @@ impl Default for Config { } } -/// An interface to the Watchdog. +/// Watchdog driver. pub struct Watchdog { _private: (), } impl Watchdog { - /// Try to create a new watchdog instance from the peripheral. + /// Try to create a new watchdog driver. /// /// This function will return an error if the watchdog is already active /// with a `config` different to the requested one, or a different number of @@ -155,6 +156,7 @@ impl Watchdog { } } +/// Watchdog handle. pub struct WatchdogHandle { index: u8, } diff --git a/examples/nrf52840/Cargo.toml b/examples/nrf52840/Cargo.toml index bbd8a5d2..95d93987 100644 --- a/examples/nrf52840/Cargo.toml +++ b/examples/nrf52840/Cargo.toml @@ -14,7 +14,7 @@ embassy-futures = { version = "0.1.0", path = "../../embassy-futures" } embassy-sync = { version = "0.1.0", path = "../../embassy-sync", features = ["defmt"] } embassy-executor = { version = "0.1.0", path = "../../embassy-executor", features = ["defmt", "integrated-timers"] } embassy-time = { version = "0.1.0", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime"] } -embassy-nrf = { version = "0.1.0", path = "../../embassy-nrf", features = ["defmt", "nrf52840", "time-driver-rtc1", "gpiote", "unstable-pac"] } +embassy-nrf = { version = "0.1.0", path = "../../embassy-nrf", features = ["defmt", "nrf52840", "time-driver-rtc1", "gpiote", "unstable-pac", "time"] } embassy-net = { version = "0.1.0", path = "../../embassy-net", features = ["defmt", "tcp", "dhcpv4", "medium-ethernet"], optional = true } embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"], optional = true } embedded-io = "0.4.0" diff --git a/examples/nrf52840/src/bin/i2s_effect.rs b/examples/nrf52840/src/bin/i2s_effect.rs index 3cca005b..52d46e4f 100644 --- a/examples/nrf52840/src/bin/i2s_effect.rs +++ b/examples/nrf52840/src/bin/i2s_effect.rs @@ -24,9 +24,9 @@ async fn main(_spawner: Spawner) { let sample_rate = master_clock.sample_rate(); info!("Sample rate: {}", sample_rate); - let config = Config::default() - .sample_width(SampleWidth::_16bit) - .channels(Channels::MonoLeft); + let mut config = Config::default(); + config.sample_width = SampleWidth::_16bit; + config.channels = Channels::MonoLeft; let irq = interrupt::take!(I2S); let buffers_out = MultiBuffering::::new(); diff --git a/examples/nrf52840/src/bin/i2s_monitor.rs b/examples/nrf52840/src/bin/i2s_monitor.rs index 48eb7d58..5ebfd954 100644 --- a/examples/nrf52840/src/bin/i2s_monitor.rs +++ b/examples/nrf52840/src/bin/i2s_monitor.rs @@ -22,9 +22,9 @@ async fn main(_spawner: Spawner) { let sample_rate = master_clock.sample_rate(); info!("Sample rate: {}", sample_rate); - let config = Config::default() - .sample_width(SampleWidth::_16bit) - .channels(Channels::MonoLeft); + let mut config = Config::default(); + config.sample_width = SampleWidth::_16bit; + config.channels = Channels::MonoLeft; let irq = interrupt::take!(I2S); let buffers = DoubleBuffering::::new(); diff --git a/examples/nrf52840/src/bin/i2s_waveform.rs b/examples/nrf52840/src/bin/i2s_waveform.rs index 1b0e8ebc..eda93067 100644 --- a/examples/nrf52840/src/bin/i2s_waveform.rs +++ b/examples/nrf52840/src/bin/i2s_waveform.rs @@ -23,9 +23,9 @@ async fn main(_spawner: Spawner) { let sample_rate = master_clock.sample_rate(); info!("Sample rate: {}", sample_rate); - let config = Config::default() - .sample_width(SampleWidth::_16bit) - .channels(Channels::MonoLeft); + let mut config = Config::default(); + config.sample_width = SampleWidth::_16bit; + config.channels = Channels::MonoLeft; let irq = interrupt::take!(I2S); let buffers = DoubleBuffering::::new(); diff --git a/examples/nrf52840/src/bin/saadc_continuous.rs b/examples/nrf52840/src/bin/saadc_continuous.rs index bb50ac65..2551d15f 100644 --- a/examples/nrf52840/src/bin/saadc_continuous.rs +++ b/examples/nrf52840/src/bin/saadc_continuous.rs @@ -5,7 +5,7 @@ use defmt::info; use embassy_executor::Spawner; use embassy_nrf::interrupt; -use embassy_nrf::saadc::{ChannelConfig, Config, Saadc, SamplerState}; +use embassy_nrf::saadc::{CallbackResult, ChannelConfig, Config, Saadc}; use embassy_nrf::timer::Frequency; use embassy_time::Duration; use {defmt_rtt as _, panic_probe as _}; @@ -61,7 +61,7 @@ async fn main(_p: Spawner) { c = 0; a = 0; } - SamplerState::Sampled + CallbackResult::Continue }, ) .await; diff --git a/examples/nrf52840/src/bin/usb_ethernet.rs b/examples/nrf52840/src/bin/usb_ethernet.rs index a8d53e46..699666ce 100644 --- a/examples/nrf52840/src/bin/usb_ethernet.rs +++ b/examples/nrf52840/src/bin/usb_ethernet.rs @@ -9,7 +9,7 @@ use embassy_executor::Spawner; use embassy_net::tcp::TcpSocket; use embassy_net::{Stack, StackResources}; use embassy_nrf::rng::Rng; -use embassy_nrf::usb::{Driver, PowerUsb}; +use embassy_nrf::usb::{Driver, HardwareVbusDetect}; use embassy_nrf::{interrupt, pac, peripherals}; use embassy_usb::class::cdc_ncm::embassy_net::{Device, Runner, State as NetState}; use embassy_usb::class::cdc_ncm::{CdcNcmClass, State}; @@ -18,7 +18,7 @@ use embedded_io::asynch::Write; use static_cell::StaticCell; use {defmt_rtt as _, panic_probe as _}; -type MyDriver = Driver<'static, peripherals::USBD, PowerUsb>; +type MyDriver = Driver<'static, peripherals::USBD, HardwareVbusDetect>; macro_rules! singleton { ($val:expr) => {{ @@ -58,7 +58,7 @@ async fn main(spawner: Spawner) { // Create the driver, from the HAL. let irq = interrupt::take!(USBD); let power_irq = interrupt::take!(POWER_CLOCK); - let driver = Driver::new(p.USBD, irq, PowerUsb::new(power_irq)); + let driver = Driver::new(p.USBD, irq, HardwareVbusDetect::new(power_irq)); // Create embassy-usb Config let mut config = Config::new(0xc0de, 0xcafe); diff --git a/examples/nrf52840/src/bin/usb_hid_keyboard.rs b/examples/nrf52840/src/bin/usb_hid_keyboard.rs index 76e19871..017cac19 100644 --- a/examples/nrf52840/src/bin/usb_hid_keyboard.rs +++ b/examples/nrf52840/src/bin/usb_hid_keyboard.rs @@ -10,7 +10,7 @@ use embassy_executor::Spawner; use embassy_futures::join::join; use embassy_futures::select::{select, Either}; use embassy_nrf::gpio::{Input, Pin, Pull}; -use embassy_nrf::usb::{Driver, PowerUsb}; +use embassy_nrf::usb::{Driver, HardwareVbusDetect}; use embassy_nrf::{interrupt, pac}; use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex; use embassy_sync::signal::Signal; @@ -34,7 +34,7 @@ async fn main(_spawner: Spawner) { // Create the driver, from the HAL. let irq = interrupt::take!(USBD); let power_irq = interrupt::take!(POWER_CLOCK); - let driver = Driver::new(p.USBD, irq, PowerUsb::new(power_irq)); + let driver = Driver::new(p.USBD, irq, HardwareVbusDetect::new(power_irq)); // Create embassy-usb Config let mut config = Config::new(0xc0de, 0xcafe); diff --git a/examples/nrf52840/src/bin/usb_hid_mouse.rs b/examples/nrf52840/src/bin/usb_hid_mouse.rs index 4916a38d..a5849129 100644 --- a/examples/nrf52840/src/bin/usb_hid_mouse.rs +++ b/examples/nrf52840/src/bin/usb_hid_mouse.rs @@ -7,7 +7,7 @@ use core::mem; use defmt::*; use embassy_executor::Spawner; use embassy_futures::join::join; -use embassy_nrf::usb::{Driver, PowerUsb}; +use embassy_nrf::usb::{Driver, HardwareVbusDetect}; use embassy_nrf::{interrupt, pac}; use embassy_time::{Duration, Timer}; use embassy_usb::class::hid::{HidWriter, ReportId, RequestHandler, State}; @@ -28,7 +28,7 @@ async fn main(_spawner: Spawner) { // Create the driver, from the HAL. let irq = interrupt::take!(USBD); let power_irq = interrupt::take!(POWER_CLOCK); - let driver = Driver::new(p.USBD, irq, PowerUsb::new(power_irq)); + let driver = Driver::new(p.USBD, irq, HardwareVbusDetect::new(power_irq)); // Create embassy-usb Config let mut config = Config::new(0xc0de, 0xcafe); diff --git a/examples/nrf52840/src/bin/usb_serial.rs b/examples/nrf52840/src/bin/usb_serial.rs index 7c9c4184..18b6f25b 100644 --- a/examples/nrf52840/src/bin/usb_serial.rs +++ b/examples/nrf52840/src/bin/usb_serial.rs @@ -7,7 +7,7 @@ use core::mem; use defmt::{info, panic}; use embassy_executor::Spawner; use embassy_futures::join::join; -use embassy_nrf::usb::{Driver, Instance, PowerUsb, UsbSupply}; +use embassy_nrf::usb::{Driver, HardwareVbusDetect, Instance, VbusDetect}; use embassy_nrf::{interrupt, pac}; use embassy_usb::class::cdc_acm::{CdcAcmClass, State}; use embassy_usb::driver::EndpointError; @@ -26,7 +26,7 @@ async fn main(_spawner: Spawner) { // Create the driver, from the HAL. let irq = interrupt::take!(USBD); let power_irq = interrupt::take!(POWER_CLOCK); - let driver = Driver::new(p.USBD, irq, PowerUsb::new(power_irq)); + let driver = Driver::new(p.USBD, irq, HardwareVbusDetect::new(power_irq)); // Create embassy-usb Config let mut config = Config::new(0xc0de, 0xcafe); @@ -97,7 +97,7 @@ impl From for Disconnected { } } -async fn echo<'d, T: Instance + 'd, P: UsbSupply + 'd>( +async fn echo<'d, T: Instance + 'd, P: VbusDetect + 'd>( class: &mut CdcAcmClass<'d, Driver<'d, T, P>>, ) -> Result<(), Disconnected> { let mut buf = [0; 64]; diff --git a/examples/nrf52840/src/bin/usb_serial_multitask.rs b/examples/nrf52840/src/bin/usb_serial_multitask.rs index 93efc2fe..3532d3f8 100644 --- a/examples/nrf52840/src/bin/usb_serial_multitask.rs +++ b/examples/nrf52840/src/bin/usb_serial_multitask.rs @@ -6,7 +6,7 @@ use core::mem; use defmt::{info, panic, unwrap}; use embassy_executor::Spawner; -use embassy_nrf::usb::{Driver, PowerUsb}; +use embassy_nrf::usb::{Driver, HardwareVbusDetect}; use embassy_nrf::{interrupt, pac, peripherals}; use embassy_usb::class::cdc_acm::{CdcAcmClass, State}; use embassy_usb::driver::EndpointError; @@ -14,7 +14,7 @@ use embassy_usb::{Builder, Config, UsbDevice}; use static_cell::StaticCell; use {defmt_rtt as _, panic_probe as _}; -type MyDriver = Driver<'static, peripherals::USBD, PowerUsb>; +type MyDriver = Driver<'static, peripherals::USBD, HardwareVbusDetect>; #[embassy_executor::task] async fn usb_task(mut device: UsbDevice<'static, MyDriver>) { @@ -42,7 +42,7 @@ async fn main(spawner: Spawner) { // Create the driver, from the HAL. let irq = interrupt::take!(USBD); let power_irq = interrupt::take!(POWER_CLOCK); - let driver = Driver::new(p.USBD, irq, PowerUsb::new(power_irq)); + let driver = Driver::new(p.USBD, irq, HardwareVbusDetect::new(power_irq)); // Create embassy-usb Config let mut config = Config::new(0xc0de, 0xcafe);