ADCv3 and example.

embassy-stm32/src/adc/mod.rs

@@ -0,0 +1,125 @@
+#![macro_use]
+
+#[cfg_attr(adc_v3, path = "v3.rs")]
+mod _version;
+
+#[allow(unused)]
+pub use _version::*;
+
+use crate::gpio::NoPin;
+use crate::peripherals;
+
+pub(crate) mod sealed {
+    use crate::gpio::Pin;
+
+    pub trait Instance {
+        fn regs() -> &'static crate::pac::adc::Adc;
+        fn common_regs() -> &'static crate::pac::adccommon::AdcCommon;
+    }
+
+    pub trait Common {
+        fn regs() -> &'static crate::pac::adccommon::AdcCommon;
+    }
+
+    pub trait AdcPin<T: Instance> {
+        fn channel(&self) -> u8;
+    }
+}
+
+pub trait Instance: sealed::Instance + 'static {}
+pub trait Common: sealed::Common + 'static {}
+pub trait AdcPin<T: Instance>: sealed::AdcPin<T> {}
+
+crate::pac::peripherals!(
+    (adc, $inst:ident) => {
+        impl crate::adc::sealed::Instance for peripherals::$inst {
+            fn regs() -> &'static crate::pac::adc::Adc {
+                &crate::pac::$inst
+            }
+            fn common_regs() -> &'static crate::pac::adccommon::AdcCommon {
+                crate::pac::peripherals!{
+                    (adccommon, $common_inst:ident) => {
+                        return &crate::pac::$common_inst
+                    };
+                }
+            }
+        }
+
+        impl crate::adc::Instance for peripherals::$inst {}
+    };
+);
+
+crate::pac::peripherals!(
+    (adccommon, $inst:ident) => {
+        impl sealed::Common for peripherals::$inst {
+            fn regs() -> &'static crate::pac::adccommon::AdcCommon {
+                &crate::pac::$inst
+            }
+        }
+
+        impl crate::adc::Common for peripherals::$inst {}
+    };
+);
+
+macro_rules! impl_pin {
+    ($inst:ident, $pin:ident, $ch:expr) => {
+        impl AdcPin<peripherals::$inst> for peripherals::$pin {}
+
+        impl sealed::AdcPin<peripherals::$inst> for peripherals::$pin {
+            fn channel(&self) -> u8 {
+                $ch
+            }
+        }
+    };
+}
+
+crate::pac::peripheral_pins!(
+    ($inst:ident, adc, ADC, $pin:ident, IN1) => {
+        impl_pin!($inst, $pin, 1);
+    };
+    ($inst:ident, adc, ADC, $pin:ident, IN2) => {
+        impl_pin!($inst, $pin, 2);
+    };
+    ($inst:ident, adc, ADC, $pin:ident, IN3) => {
+        impl_pin!($inst, $pin, 3);
+    };
+    ($inst:ident, adc, ADC, $pin:ident, IN4) => {
+        impl_pin!($inst, $pin, 4);
+    };
+    ($inst:ident, adc, ADC, $pin:ident, IN5) => {
+        impl_pin!($inst, $pin, 5);
+    };
+    ($inst:ident, adc, ADC, $pin:ident, IN6) => {
+        impl_pin!($inst, $pin, 6);
+    };
+    ($inst:ident, adc, ADC, $pin:ident, IN7) => {
+        impl_pin!($inst, $pin, 7);
+    };
+    ($inst:ident, adc, ADC, $pin:ident, IN8) => {
+        impl_pin!($inst, $pin, 8);
+    };
+    ($inst:ident, adc, ADC, $pin:ident, IN9) => {
+        impl_pin!($inst, $pin, 9);
+    };
+    ($inst:ident, adc, ADC, $pin:ident, IN10) => {
+        impl_pin!($inst, $pin, 10);
+    };
+    ($inst:ident, adc, ADC, $pin:ident, IN11) => {
+        impl_pin!($inst, $pin, 11);
+    };
+    ($inst:ident, adc, ADC, $pin:ident, IN12) => {
+        impl_pin!($inst, $pin, 12);
+    };
+    ($inst:ident, adc, ADC, $pin:ident, IN13) => {
+        impl_pin!($inst, $pin, 13);
+    };
+    ($inst:ident, adc, ADC, $pin:ident, IN14) => {
+        impl_pin!($inst, $pin, 14);
+    };
+    ($inst:ident, adc, ADC, $pin:ident, IN15) => {
+        impl_pin!($inst, $pin, 15);
+    };
+    ($inst:ident, adc, ADC, $pin:ident, IN16) => {
+        impl_pin!($inst, $pin, 16);
+    };
+);

embassy-stm32/src/adc/v3.rs

@@ -0,0 +1,317 @@
+use crate::adc::{AdcPin, Instance};
+use core::convert::Infallible;
+use core::marker::PhantomData;
+use cortex_m::delay::Delay;
+use embassy::util::Unborrow;
+use embassy_extras::unborrow;
+use embedded_hal::blocking::delay::{DelayMs, DelayUs};
+
+pub const VDDA_CALIB_MV: u32 = 3000;
+
+pub enum Resolution {
+    TwelveBit,
+    TenBit,
+    EightBit,
+    SixBit,
+}
+
+impl Default for Resolution {
+    fn default() -> Self {
+        Self::TwelveBit
+    }
+}
+
+impl Resolution {
+    fn res(&self) -> crate::pac::adc::vals::Res {
+        match self {
+            Resolution::TwelveBit => crate::pac::adc::vals::Res::TWELVEBIT,
+            Resolution::TenBit => crate::pac::adc::vals::Res::TENBIT,
+            Resolution::EightBit => crate::pac::adc::vals::Res::EIGHTBIT,
+            Resolution::SixBit => crate::pac::adc::vals::Res::SIXBIT,
+        }
+    }
+
+    fn to_max_count(&self) -> u32 {
+        match self {
+            Resolution::TwelveBit => (1 << 12) - 1,
+            Resolution::TenBit => (1 << 10) - 1,
+            Resolution::EightBit => (1 << 8) - 1,
+            Resolution::SixBit => (1 << 6) - 1,
+        }
+    }
+}
+
+pub struct Vref;
+impl<T: Instance> AdcPin<T> for Vref {}
+impl<T: Instance> super::sealed::AdcPin<T> for Vref {
+    fn channel(&self) -> u8 {
+        0
+    }
+}
+
+pub struct Temperature;
+impl<T: Instance> AdcPin<T> for Temperature {}
+impl<T: Instance> super::sealed::AdcPin<T> for Temperature {
+    fn channel(&self) -> u8 {
+        17
+    }
+}
+
+pub struct Vbat;
+impl<T: Instance> AdcPin<T> for Vbat {}
+impl<T: Instance> super::sealed::AdcPin<T> for Vbat {
+    fn channel(&self) -> u8 {
+        18
+    }
+}
+
+/// ADC sample time
+///
+/// The default setting is 2.5 ADC clock cycles.
+#[derive(Clone, Copy, Debug, Eq, PartialEq, Ord, PartialOrd)]
+pub enum SampleTime {
+    /// 2.5 ADC clock cycles
+    Cycles2_5 = 0b000,
+
+    /// 6.5 ADC clock cycles
+    Cycles6_5 = 0b001,
+
+    /// 12.5 ADC clock cycles
+    Cycles12_5 = 0b010,
+
+    /// 24.5 ADC clock cycles
+    Cycles24_5 = 0b011,
+
+    /// 47.5 ADC clock cycles
+    Cycles47_5 = 0b100,
+
+    /// 92.5 ADC clock cycles
+    Cycles92_5 = 0b101,
+
+    /// 247.5 ADC clock cycles
+    Cycles247_5 = 0b110,
+
+    /// 640.5 ADC clock cycles
+    Cycles640_5 = 0b111,
+}
+
+impl SampleTime {
+    fn sample_time(&self) -> crate::pac::adc::vals::SampleTime {
+        match self {
+            SampleTime::Cycles2_5 => crate::pac::adc::vals::SampleTime::CYCLES2_5,
+            SampleTime::Cycles6_5 => crate::pac::adc::vals::SampleTime::CYCLES6_5,
+            SampleTime::Cycles12_5 => crate::pac::adc::vals::SampleTime::CYCLES12_5,
+            SampleTime::Cycles24_5 => crate::pac::adc::vals::SampleTime::CYCLES24_5,
+            SampleTime::Cycles47_5 => crate::pac::adc::vals::SampleTime::CYCLES47_5,
+            SampleTime::Cycles92_5 => crate::pac::adc::vals::SampleTime::CYCLES92_5,
+            SampleTime::Cycles247_5 => crate::pac::adc::vals::SampleTime::CYCLES247_5,
+            SampleTime::Cycles640_5 => crate::pac::adc::vals::SampleTime::CYCLES640_5,
+        }
+    }
+}
+
+impl Default for SampleTime {
+    fn default() -> Self {
+        Self::Cycles2_5
+    }
+}
+
+pub struct Adc<'d, T: Instance> {
+    sample_time: SampleTime,
+    calibrated_vdda: u32,
+    resolution: Resolution,
+    phantom: PhantomData<&'d mut T>,
+}
+
+impl<'d, T: Instance> Adc<'d, T> {
+    pub fn new(_peri: impl Unborrow<Target = T> + 'd, mut delay: Delay) -> (Self, Delay) {
+        unborrow!(_peri);
+        unsafe {
+            T::regs().cr().modify(|reg| {
+                reg.set_deeppwd(false);
+                reg.set_advregen(true);
+            });
+        }
+
+        delay.delay_us(20);
+
+        unsafe {
+            while T::regs().cr().read().adcal() {
+                // spin
+            }
+        }
+
+        delay.delay_us(1);
+
+        (
+            Self {
+                sample_time: Default::default(),
+                resolution: Resolution::default(),
+                calibrated_vdda: VDDA_CALIB_MV,
+                phantom: PhantomData,
+            },
+            delay,
+        )
+    }
+
+    pub fn enable_vref(&self, mut delay: Delay) -> (Vref, Delay) {
+        unsafe {
+            T::common_regs().ccr().modify(|reg| {
+                reg.set_vrefen(true);
+            });
+        }
+
+        // "Table 24. Embedded internal voltage reference" states that it takes a maximum of 12 us
+        // to stabilize the internal voltage reference, we wait a little more.
+        // TODO: delay 15us
+        //cortex_m::asm::delay(20_000_000);
+        delay.delay_us(15);
+
+        (Vref {}, delay)
+    }
+
+    pub fn enable_temperature(&self) -> Temperature {
+        unsafe {
+            T::common_regs().ccr().modify(|reg| {
+                reg.set_ch17sel(true);
+            });
+        }
+
+        Temperature {}
+    }
+
+    pub fn enable_vbat(&self) -> Vbat {
+        unsafe {
+            T::common_regs().ccr().modify(|reg| {
+                reg.set_ch18sel(true);
+            });
+        }
+
+        Vbat {}
+    }
+
+    /// Calculates the system VDDA by sampling the internal VREF channel and comparing
+    /// the result with the value stored at the factory. If the chip's VDDA is not stable, run
+    /// this before each ADC conversion.
+    fn calibrate(&mut self, vref: &mut Vref) {
+        let vref_cal = unsafe { crate::pac::VREFINTCAL.data().read().value() };
+        let old_sample_time = self.sample_time;
+
+        // "Table 24. Embedded internal voltage reference" states that the sample time needs to be
+        // at a minimum 4 us. With 640.5 ADC cycles we have a minimum of 8 us at 80 MHz, leaving
+        // some headroom.
+        self.sample_time = SampleTime::Cycles640_5;
+
+        // This can't actually fail, it's just in a result to satisfy hal trait
+        let vref_samp = self.read(vref);
+
+        self.sample_time = old_sample_time;
+
+        self.calibrated_vdda = (VDDA_CALIB_MV * u32::from(vref_cal)) / u32::from(vref_samp);
+    }
+
+    pub fn set_sample_time(&mut self, sample_time: SampleTime) {
+        self.sample_time = sample_time;
+    }
+
+    pub fn set_resolution(&mut self, resolution: Resolution) {
+        self.resolution = resolution;
+    }
+
+    /// Convert a measurement to millivolts
+    pub fn to_millivolts(&self, sample: u16) -> u16 {
+        ((u32::from(sample) * self.calibrated_vdda) / self.resolution.to_max_count()) as u16
+    }
+
+    /*
+    /// Convert a raw sample from the `Temperature` to deg C
+    pub fn to_degrees_centigrade(sample: u16) -> f32 {
+        (130.0 - 30.0) / (VtempCal130::get().read() as f32 - VtempCal30::get().read() as f32)
+            * (sample as f32 - VtempCal30::get().read() as f32)
+            + 30.0
+    }
+     */
+
+    pub fn read(&mut self, pin: &mut impl AdcPin<T>) -> u16 {
+        let v = pin.channel();
+
+        unsafe {
+            // Make sure bits are off
+            while T::regs().cr().read().addis() {
+                // spin
+            }
+
+            // Enable ADC
+            T::regs().isr().modify(|reg| {
+                reg.set_adrdy(true);
+            });
+            T::regs().cr().modify(|reg| {
+                reg.set_aden(true);
+            });
+
+            while !T::regs().isr().read().adrdy() {
+                // spin
+            }
+
+            // Configure ADC
+            T::regs()
+                .cfgr()
+                .modify(|reg| reg.set_res(self.resolution.res()));
+
+            // Configure channel
+            Self::set_channel_sample_time(pin.channel(), self.sample_time);
+
+            // Select channel
+            T::regs().sqr1().write(|reg| reg.set_sq(0, pin.channel()));
+
+            // Start conversion
+            T::regs().isr().modify(|reg| {
+                reg.set_eos(true);
+                reg.set_eoc(true);
+            });
+            T::regs().cr().modify(|reg| {
+                reg.set_adstart(true);
+            });
+
+            while !T::regs().isr().read().eos() {
+                // spin
+            }
+
+            // Read ADC value first time and discard it, as per errata sheet.
+            // The errata states that if we do conversions slower than 1 kHz, the
+            // first read ADC value can be corrupted, so we discard it and measure again.
+
+            let _ = T::regs().dr().read();
+
+            T::regs().isr().modify(|reg| {
+                reg.set_eos(true);
+                reg.set_eoc(true);
+            });
+            T::regs().cr().modify(|reg| {
+                reg.set_adstart(true);
+            });
+
+            while !T::regs().isr().read().eos() {
+                // spin
+            }
+
+            let val = T::regs().dr().read().0 as u16;
+
+            T::regs().cr().modify(|reg| reg.set_addis(true));
+
+            val
+        }
+    }
+
+    unsafe fn set_channel_sample_time(ch: u8, sample_time: SampleTime) {
+        if ch >= 0 && ch <= 9 {
+            T::regs()
+                .smpr1()
+                .modify(|reg| reg.set_smp(ch as _, sample_time.sample_time()));
+        } else {
+            T::regs()
+                .smpr2()
+                .modify(|reg| reg.set_smp((ch - 10) as _, sample_time.sample_time()));
+        }
+    }
+}

embassy-stm32/src/lib.rs

@@ -21,6 +21,8 @@ pub mod gpio;
 pub mod rcc;
 
 // Sometimes-present hardware
+#[cfg(adc)]
+pub mod adc;
 #[cfg(timer)]
 pub mod clock;
 #[cfg(dac)]

examples/stm32l4/src/bin/adc.rs

@@ -0,0 +1,100 @@
+#![no_std]
+#![no_main]
+#![feature(trait_alias)]
+#![feature(min_type_alias_impl_trait)]
+#![feature(impl_trait_in_bindings)]
+#![feature(type_alias_impl_trait)]
+
+#[path = "../example_common.rs"]
+mod example_common;
+
+use embassy_stm32::gpio::{Input, Level, NoPin, Output, Pull};
+use embedded_hal::digital::v2::{InputPin, OutputPin};
+use example_common::*;
+
+use cortex_m_rt::entry;
+//use stm32f4::stm32f429 as pac;
+use cortex_m::delay::Delay;
+use embassy_stm32::adc::{Adc, Resolution};
+use embassy_stm32::dac::{Channel, Dac, Value};
+use embassy_stm32::spi::{ByteOrder, Config, Spi, MODE_0};
+use embassy_stm32::time::Hertz;
+use embedded_hal::blocking::spi::Transfer;
+use micromath::F32Ext;
+use stm32l4::stm32l4x5 as pac;
+use stm32l4xx_hal::gpio::PA4;
+use stm32l4xx_hal::rcc::PllSource;
+use stm32l4xx_hal::{prelude::*, rcc};
+
+#[entry]
+fn main() -> ! {
+    info!("Hello World, dude!");
+    //let pp = pac::Peripherals::take().unwrap();
+    let cp = cortex_m::Peripherals::take().unwrap();
+    let pp = stm32l4xx_hal::stm32::Peripherals::take().unwrap();
+    let mut flash = pp.FLASH.constrain();
+    let mut rcc = pp.RCC.constrain();
+    let mut pwr = pp.PWR.constrain(&mut rcc.apb1r1);
+
+    let mut delay = Delay::new(cp.SYST, 80_000_000);
+
+    // TRY the other clock configuration
+    // let clocks = rcc.cfgr.freeze(&mut flash.acr);
+    let clocks = rcc
+        .cfgr
+        .sysclk(80.mhz())
+        .pclk1(80.mhz())
+        .pclk2(80.mhz())
+        .pll_source(PllSource::HSI16)
+        .freeze(&mut flash.acr, &mut pwr);
+
+    let pp = unsafe { pac::Peripherals::steal() };
+
+    pp.RCC.ccipr.modify(|_, w| {
+        unsafe {
+            w.adcsel().bits(0b11);
+        }
+        w
+    });
+
+    pp.DBGMCU.cr.modify(|_, w| {
+        w.dbg_sleep().set_bit();
+        w.dbg_standby().set_bit();
+        w.dbg_stop().set_bit()
+    });
+
+    pp.RCC.ahb2enr.modify(|_, w| {
+        w.adcen().set_bit();
+        w.gpioaen().set_bit();
+        w.gpioben().set_bit();
+        w.gpiocen().set_bit();
+        w.gpioden().set_bit();
+        w.gpioeen().set_bit();
+        w.gpiofen().set_bit();
+        w
+    });
+
+    let p = embassy_stm32::init(Default::default());
+
+    let (mut adc, mut delay) = Adc::new(p.ADC1, delay);
+    //adc.enable_vref();
+    adc.set_resolution(Resolution::EightBit);
+    let mut channel = p.PC0;
+
+    loop {
+        let v = adc.read(&mut channel);
+        info!("--> {}", v);
+    }
+}
+
+fn to_sine_wave(v: u8) -> u8 {
+    if v >= 128 {
+        // top half
+        let r = 3.14 * ((v - 128) as f32 / 128.0);
+        (r.sin() * 128.0 + 127.0) as u8
+    } else {
+        // bottom half
+        let r = 3.14 + 3.14 * (v as f32 / 128.0);
+        (r.sin() * 128.0 + 127.0) as u8
+    }
+}

examples/stm32l4/src/bin/button.rs

@@ -15,7 +15,6 @@ use example_common::*;
 use cortex_m_rt::entry;
 use stm32l4::stm32l4x5 as pac;
 
-
 #[entry]
 fn main() -> ! {
     info!("Hello World!");

examples/stm32l4/src/bin/button_exti.rs

@@ -80,5 +80,4 @@ fn main() -> ! {
     executor.run(|spawner| {
         unwrap!(spawner.spawn(main_task()));
     })
-
 }

examples/stm32l4/src/bin/dac.rs

@@ -8,20 +8,20 @@
 #[path = "../example_common.rs"]
 mod example_common;
 
-use embassy_stm32::gpio::{Level, Output, Input, Pull, NoPin};
+use embassy_stm32::gpio::{Input, Level, NoPin, Output, Pull};
-use embedded_hal::digital::v2::{OutputPin, InputPin};
+use embedded_hal::digital::v2::{InputPin, OutputPin};
 use example_common::*;
 
 use cortex_m_rt::entry;
 //use stm32f4::stm32f429 as pac;
-use stm32l4::stm32l4x5 as pac;
+use embassy_stm32::dac::{Channel, Dac, Value};
-use embassy_stm32::spi::{Spi, MODE_0, ByteOrder, Config};
+use embassy_stm32::spi::{ByteOrder, Config, Spi, MODE_0};
 use embassy_stm32::time::Hertz;
 use embedded_hal::blocking::spi::Transfer;
-use stm32l4xx_hal::{rcc, prelude::*};
+use stm32l4::stm32l4x5 as pac;
-use stm32l4xx_hal::rcc::PllSource;
-use embassy_stm32::dac::{Dac, Value, Channel};
 use stm32l4xx_hal::gpio::PA4;
+use stm32l4xx_hal::rcc::PllSource;
+use stm32l4xx_hal::{prelude::*, rcc};
 
 #[entry]
 fn main() -> ! {

stm32-data

@@ -1 +1 @@
-Subproject commit 8f32d8e4f25276f6f2155e8dd5bbed1acefd657b
+Subproject commit 67b2029a7f203e52f6e1f68c71c7d0aacfef5795