Merge pull request #1300 from embassy-rs/h5

Add support for STM32H5.

ci.sh

@@ -66,6 +66,8 @@ cargo batch  \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f107vc,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f103re,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32f100c4,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32h503rb,defmt,exti,time-driver-any,unstable-traits \
+    --- build --release --manifest-path embassy-stm32/Cargo.toml --target thumbv7m-none-eabi --features nightly,stm32h562ag,defmt,exti,time-driver-any,unstable-traits \
     --- build --release --manifest-path embassy-boot/nrf/Cargo.toml --target thumbv7em-none-eabi --features embassy-nrf/nrf52840 \
     --- build --release --manifest-path embassy-boot/nrf/Cargo.toml --target thumbv8m.main-none-eabihf --features embassy-nrf/nrf9160-ns \
     --- build --release --manifest-path embassy-boot/rp/Cargo.toml --target thumbv6m-none-eabi \
@@ -87,6 +89,7 @@ cargo batch  \
     --- build --release --manifest-path examples/stm32c0/Cargo.toml --target thumbv6m-none-eabi --out-dir out/examples/stm32c0 \
     --- build --release --manifest-path examples/stm32g0/Cargo.toml --target thumbv6m-none-eabi --out-dir out/examples/stm32g0 \
     --- build --release --manifest-path examples/stm32g4/Cargo.toml --target thumbv7em-none-eabi --out-dir out/examples/stm32g4 \
+    --- build --release --manifest-path examples/stm32h5/Cargo.toml --target thumbv7em-none-eabi --out-dir out/examples/stm32h5 \
     --- build --release --manifest-path examples/stm32h7/Cargo.toml --target thumbv7em-none-eabi --out-dir out/examples/stm32h7 \
     --- build --release --manifest-path examples/stm32l0/Cargo.toml --target thumbv6m-none-eabi --out-dir out/examples/stm32l0 \
     --- build --release --manifest-path examples/stm32l1/Cargo.toml --target thumbv7m-none-eabi --out-dir out/examples/stm32l1 \

embassy-stm32/Cargo.toml

@@ -60,7 +60,7 @@ sdio-host = "0.5.0"
 embedded-sdmmc = { git = "https://github.com/embassy-rs/embedded-sdmmc-rs", rev = "46d1b1c2ff13e31e282ec1e352421721694f126a", optional = true }
 critical-section = "1.1"
 atomic-polyfill = "1.0.1"
-stm32-metapac = "3"
+stm32-metapac = "4"
 vcell = "0.1.3"
 bxcan = "0.7.0"
 nb = "1.0.0"
@@ -75,7 +75,7 @@ critical-section = { version = "1.1", features = ["std"] }
 [build-dependencies]
 proc-macro2 = "1.0.36"
 quote = "1.0.15"
-stm32-metapac = { version = "3", default-features = false, features = ["metadata"]}
+stm32-metapac = { version = "4", default-features = false, features = ["metadata"]}
 
 [features]
 default = ["stm32-metapac/rt"]
@@ -834,6 +834,37 @@ stm32g4a1ke = [ "stm32-metapac/stm32g4a1ke" ]
 stm32g4a1me = [ "stm32-metapac/stm32g4a1me" ]
 stm32g4a1re = [ "stm32-metapac/stm32g4a1re" ]
 stm32g4a1ve = [ "stm32-metapac/stm32g4a1ve" ]
+stm32h503cb = [ "stm32-metapac/stm32h503cb" ]
+stm32h503eb = [ "stm32-metapac/stm32h503eb" ]
+stm32h503kb = [ "stm32-metapac/stm32h503kb" ]
+stm32h503rb = [ "stm32-metapac/stm32h503rb" ]
+stm32h562ag = [ "stm32-metapac/stm32h562ag" ]
+stm32h562ai = [ "stm32-metapac/stm32h562ai" ]
+stm32h562ig = [ "stm32-metapac/stm32h562ig" ]
+stm32h562ii = [ "stm32-metapac/stm32h562ii" ]
+stm32h562rg = [ "stm32-metapac/stm32h562rg" ]
+stm32h562ri = [ "stm32-metapac/stm32h562ri" ]
+stm32h562vg = [ "stm32-metapac/stm32h562vg" ]
+stm32h562vi = [ "stm32-metapac/stm32h562vi" ]
+stm32h562zg = [ "stm32-metapac/stm32h562zg" ]
+stm32h562zi = [ "stm32-metapac/stm32h562zi" ]
+stm32h563ag = [ "stm32-metapac/stm32h563ag" ]
+stm32h563ai = [ "stm32-metapac/stm32h563ai" ]
+stm32h563ig = [ "stm32-metapac/stm32h563ig" ]
+stm32h563ii = [ "stm32-metapac/stm32h563ii" ]
+stm32h563mi = [ "stm32-metapac/stm32h563mi" ]
+stm32h563rg = [ "stm32-metapac/stm32h563rg" ]
+stm32h563ri = [ "stm32-metapac/stm32h563ri" ]
+stm32h563vg = [ "stm32-metapac/stm32h563vg" ]
+stm32h563vi = [ "stm32-metapac/stm32h563vi" ]
+stm32h563zg = [ "stm32-metapac/stm32h563zg" ]
+stm32h563zi = [ "stm32-metapac/stm32h563zi" ]
+stm32h573ai = [ "stm32-metapac/stm32h573ai" ]
+stm32h573ii = [ "stm32-metapac/stm32h573ii" ]
+stm32h573mi = [ "stm32-metapac/stm32h573mi" ]
+stm32h573ri = [ "stm32-metapac/stm32h573ri" ]
+stm32h573vi = [ "stm32-metapac/stm32h573vi" ]
+stm32h573zi = [ "stm32-metapac/stm32h573zi" ]
 stm32h723ve = [ "stm32-metapac/stm32h723ve" ]
 stm32h723vg = [ "stm32-metapac/stm32h723vg" ]
 stm32h723ze = [ "stm32-metapac/stm32h723ze" ]
@@ -1316,6 +1347,22 @@ stm32l562qe = [ "stm32-metapac/stm32l562qe" ]
 stm32l562re = [ "stm32-metapac/stm32l562re" ]
 stm32l562ve = [ "stm32-metapac/stm32l562ve" ]
 stm32l562ze = [ "stm32-metapac/stm32l562ze" ]
+stm32u535cb = [ "stm32-metapac/stm32u535cb" ]
+stm32u535cc = [ "stm32-metapac/stm32u535cc" ]
+stm32u535ce = [ "stm32-metapac/stm32u535ce" ]
+stm32u535je = [ "stm32-metapac/stm32u535je" ]
+stm32u535nc = [ "stm32-metapac/stm32u535nc" ]
+stm32u535ne = [ "stm32-metapac/stm32u535ne" ]
+stm32u535rb = [ "stm32-metapac/stm32u535rb" ]
+stm32u535rc = [ "stm32-metapac/stm32u535rc" ]
+stm32u535re = [ "stm32-metapac/stm32u535re" ]
+stm32u535vc = [ "stm32-metapac/stm32u535vc" ]
+stm32u535ve = [ "stm32-metapac/stm32u535ve" ]
+stm32u545ce = [ "stm32-metapac/stm32u545ce" ]
+stm32u545je = [ "stm32-metapac/stm32u545je" ]
+stm32u545ne = [ "stm32-metapac/stm32u545ne" ]
+stm32u545re = [ "stm32-metapac/stm32u545re" ]
+stm32u545ve = [ "stm32-metapac/stm32u545ve" ]
 stm32u575ag = [ "stm32-metapac/stm32u575ag" ]
 stm32u575ai = [ "stm32-metapac/stm32u575ai" ]
 stm32u575cg = [ "stm32-metapac/stm32u575cg" ]
@@ -1337,6 +1384,32 @@ stm32u585qi = [ "stm32-metapac/stm32u585qi" ]
 stm32u585ri = [ "stm32-metapac/stm32u585ri" ]
 stm32u585vi = [ "stm32-metapac/stm32u585vi" ]
 stm32u585zi = [ "stm32-metapac/stm32u585zi" ]
+stm32u595ai = [ "stm32-metapac/stm32u595ai" ]
+stm32u595aj = [ "stm32-metapac/stm32u595aj" ]
+stm32u595qi = [ "stm32-metapac/stm32u595qi" ]
+stm32u595qj = [ "stm32-metapac/stm32u595qj" ]
+stm32u595ri = [ "stm32-metapac/stm32u595ri" ]
+stm32u595rj = [ "stm32-metapac/stm32u595rj" ]
+stm32u595vi = [ "stm32-metapac/stm32u595vi" ]
+stm32u595vj = [ "stm32-metapac/stm32u595vj" ]
+stm32u595zi = [ "stm32-metapac/stm32u595zi" ]
+stm32u595zj = [ "stm32-metapac/stm32u595zj" ]
+stm32u599bj = [ "stm32-metapac/stm32u599bj" ]
+stm32u599ni = [ "stm32-metapac/stm32u599ni" ]
+stm32u599nj = [ "stm32-metapac/stm32u599nj" ]
+stm32u599vi = [ "stm32-metapac/stm32u599vi" ]
+stm32u599vj = [ "stm32-metapac/stm32u599vj" ]
+stm32u599zi = [ "stm32-metapac/stm32u599zi" ]
+stm32u599zj = [ "stm32-metapac/stm32u599zj" ]
+stm32u5a5aj = [ "stm32-metapac/stm32u5a5aj" ]
+stm32u5a5qj = [ "stm32-metapac/stm32u5a5qj" ]
+stm32u5a5rj = [ "stm32-metapac/stm32u5a5rj" ]
+stm32u5a5vj = [ "stm32-metapac/stm32u5a5vj" ]
+stm32u5a5zj = [ "stm32-metapac/stm32u5a5zj" ]
+stm32u5a9bj = [ "stm32-metapac/stm32u5a9bj" ]
+stm32u5a9nj = [ "stm32-metapac/stm32u5a9nj" ]
+stm32u5a9vj = [ "stm32-metapac/stm32u5a9vj" ]
+stm32u5a9zj = [ "stm32-metapac/stm32u5a9zj" ]
 stm32wb10cc = [ "stm32-metapac/stm32wb10cc" ]
 stm32wb15cc = [ "stm32-metapac/stm32wb15cc" ]
 stm32wb30ce = [ "stm32-metapac/stm32wb30ce" ]

embassy-stm32/build.rs

@@ -50,7 +50,7 @@ fn main() {
                 // We *shouldn't* have singletons for these, but the HAL currently requires
                 // singletons, for using with RccPeripheral to enable/disable clocks to them.
                 "rcc" => {
-                    if r.version.starts_with("h7") || r.version.starts_with("f4") {
+                    if r.version.starts_with("h5") || r.version.starts_with("h7") || r.version.starts_with("f4") {
                         singletons.push("MCO1".to_string());
                         singletons.push("MCO2".to_string());
                     }
@@ -539,7 +539,10 @@ fn main() {
                     // MCO is special
                     if pin.signal.starts_with("MCO_") {
                         // Supported in H7 only for now
-                        if regs.version.starts_with("h7") || regs.version.starts_with("f4") {
+                        if regs.version.starts_with("h5")
+                            || regs.version.starts_with("h7")
+                            || regs.version.starts_with("f4")
+                        {
                             peri = format_ident!("{}", pin.signal.replace("_", ""));
                         } else {
                             continue;

embassy-stm32/src/eth/v2/mod.rs

@@ -9,7 +9,7 @@ pub(crate) use self::descriptors::{RDes, RDesRing, TDes, TDesRing};
 use super::*;
 use crate::gpio::sealed::{AFType, Pin as _};
 use crate::gpio::{AnyPin, Speed};
-use crate::pac::{ETH, RCC, SYSCFG};
+use crate::pac::ETH;
 use crate::Peripheral;
 
 const MTU: usize = 1514; // 14 Ethernet header + 1500 IP packet
@@ -60,16 +60,33 @@ impl<'d, T: Instance, P: PHY> Ethernet<'d, T, P> {
         unsafe {
             // Enable the necessary Clocks
             // NOTE(unsafe) We have exclusive access to the registers
+            #[cfg(not(rcc_h5))]
             critical_section::with(|_| {
-                RCC.apb4enr().modify(|w| w.set_syscfgen(true));
+                crate::pac::RCC.apb4enr().modify(|w| w.set_syscfgen(true));
-                RCC.ahb1enr().modify(|w| {
+                crate::pac::RCC.ahb1enr().modify(|w| {
                     w.set_eth1macen(true);
                     w.set_eth1txen(true);
                     w.set_eth1rxen(true);
                 });
 
                 // RMII
-                SYSCFG.pmcr().modify(|w| w.set_epis(0b100));
+                crate::pac::SYSCFG.pmcr().modify(|w| w.set_epis(0b100));
+            });
+
+            #[cfg(rcc_h5)]
+            critical_section::with(|_| {
+                crate::pac::RCC.apb3enr().modify(|w| w.set_sbsen(true));
+
+                crate::pac::RCC.ahb1enr().modify(|w| {
+                    w.set_ethen(true);
+                    w.set_ethtxen(true);
+                    w.set_ethrxen(true);
+                });
+
+                // RMII
+                crate::pac::SBS
+                    .pmcr()
+                    .modify(|w| w.set_eth_sel_phy(crate::pac::sbs::vals::EthSelPhy::B_0X4));
             });
 
             config_pins!(ref_clk, mdio, mdc, crs, rx_d0, rx_d1, tx_d0, tx_d1, tx_en);

embassy-stm32/src/exti.rs

@@ -25,11 +25,11 @@ fn cpu_regs() -> pac::exti::Exti {
     EXTI
 }
 
-#[cfg(not(any(exti_c0, exti_g0, exti_l5, gpio_v1, exti_u5)))]
+#[cfg(not(any(exti_c0, exti_g0, exti_l5, gpio_v1, exti_u5, exti_h5, exti_h50)))]
 fn exticr_regs() -> pac::syscfg::Syscfg {
     pac::SYSCFG
 }
-#[cfg(any(exti_c0, exti_g0, exti_l5, exti_u5))]
+#[cfg(any(exti_c0, exti_g0, exti_l5, exti_u5, exti_h5, exti_h50))]
 fn exticr_regs() -> pac::exti::Exti {
     EXTI
 }
@@ -39,9 +39,9 @@ fn exticr_regs() -> pac::afio::Afio {
 }
 
 pub unsafe fn on_irq() {
-    #[cfg(not(any(exti_c0, exti_g0, exti_l5, exti_u5)))]
+    #[cfg(not(any(exti_c0, exti_g0, exti_l5, exti_u5, exti_h5, exti_h50)))]
     let bits = EXTI.pr(0).read().0;
-    #[cfg(any(exti_c0, exti_g0, exti_l5, exti_u5))]
+    #[cfg(any(exti_c0, exti_g0, exti_l5, exti_u5, exti_h5, exti_h50))]
     let bits = EXTI.rpr(0).read().0 | EXTI.fpr(0).read().0;
 
     // Mask all the channels that fired.
@@ -53,9 +53,9 @@ pub unsafe fn on_irq() {
     }
 
     // Clear pending
-    #[cfg(not(any(exti_c0, exti_g0, exti_l5, exti_u5)))]
+    #[cfg(not(any(exti_c0, exti_g0, exti_l5, exti_u5, exti_h5, exti_h50)))]
     EXTI.pr(0).write_value(Lines(bits));
-    #[cfg(any(exti_c0, exti_g0, exti_l5, exti_u5))]
+    #[cfg(any(exti_c0, exti_g0, exti_l5, exti_u5, exti_h5, exti_h50))]
     {
         EXTI.rpr(0).write_value(Lines(bits));
         EXTI.fpr(0).write_value(Lines(bits));
@@ -213,9 +213,9 @@ impl<'a> ExtiInputFuture<'a> {
             EXTI.ftsr(0).modify(|w| w.set_line(pin, falling));
 
             // clear pending bit
-            #[cfg(not(any(exti_c0, exti_g0, exti_l5, exti_u5)))]
+            #[cfg(not(any(exti_c0, exti_g0, exti_l5, exti_u5, exti_h5, exti_h50)))]
             EXTI.pr(0).write(|w| w.set_line(pin, true));
-            #[cfg(any(exti_c0, exti_g0, exti_l5, exti_u5))]
+            #[cfg(any(exti_c0, exti_g0, exti_l5, exti_u5, exti_h5, exti_h50))]
             {
                 EXTI.rpr(0).write(|w| w.set_line(pin, true));
                 EXTI.fpr(0).write(|w| w.set_line(pin, true));
@@ -364,7 +364,7 @@ pub(crate) unsafe fn init() {
 
     foreach_exti_irq!(enable_irq);
 
-    #[cfg(not(any(rcc_wb, rcc_wl5, rcc_wle, stm32f1)))]
+    #[cfg(not(any(rcc_wb, rcc_wl5, rcc_wle, stm32f1, exti_h5, exti_h50)))]
     <crate::peripherals::SYSCFG as crate::rcc::sealed::RccPeripheral>::enable();
     #[cfg(stm32f1)]
     <crate::peripherals::AFIO as crate::rcc::sealed::RccPeripheral>::enable();

embassy-stm32/src/rcc/h5.rs

@@ -0,0 +1,606 @@
+use core::marker::PhantomData;
+
+use stm32_metapac::rcc::vals::{Hpre, Ppre, Timpre};
+
+use crate::pac::pwr::vals::Vos;
+use crate::pac::rcc::vals::{Hseext, Hsidiv, Mco1, Mco2, Pllrge, Pllsrc, Pllvcosel, Sw};
+use crate::pac::{FLASH, PWR, RCC};
+use crate::rcc::{set_freqs, Clocks};
+use crate::time::Hertz;
+use crate::{peripherals, Peripheral};
+
+/// HSI speed
+pub const HSI_FREQ: Hertz = Hertz(64_000_000);
+
+/// CSI speed
+pub const CSI_FREQ: Hertz = Hertz(4_000_000);
+
+/// HSI48 speed
+pub const HSI48_FREQ: Hertz = Hertz(48_000_000);
+
+/// LSI speed
+pub const LSI_FREQ: Hertz = Hertz(32_000);
+
+const VCO_MIN: u32 = 150_000_000;
+const VCO_MAX: u32 = 420_000_000;
+const VCO_WIDE_MIN: u32 = 128_000_000;
+const VCO_WIDE_MAX: u32 = 560_000_000;
+
+/// Voltage Scale
+///
+/// Represents the voltage range feeding the CPU core. The maximum core
+/// clock frequency depends on this value.
+#[derive(Copy, Clone, PartialEq)]
+pub enum VoltageScale {
+    /// VOS 0 range VCORE 1.30V - 1.40V
+    Scale0,
+    /// VOS 1 range VCORE 1.15V - 1.26V
+    Scale1,
+    /// VOS 2 range VCORE 1.05V - 1.15V
+    Scale2,
+    /// VOS 3 range VCORE 0.95V - 1.05V
+    Scale3,
+}
+
+pub enum HseMode {
+    /// crystal/ceramic oscillator (HSEBYP=0)
+    Oscillator,
+    ///  external analog clock (low swing) (HSEBYP=1, HSEEXT=0)
+    BypassAnalog,
+    ///  external digital clock (full swing) (HSEBYP=1, HSEEXT=1)
+    BypassDigital,
+}
+
+pub struct Hse {
+    /// HSE frequency.
+    pub freq: Hertz,
+    /// HSE mode.
+    pub mode: HseMode,
+}
+
+pub enum Hsi {
+    /// 64Mhz
+    Mhz64,
+    /// 32Mhz (divided by 2)
+    Mhz32,
+    /// 16Mhz (divided by 4)
+    Mhz16,
+    /// 8Mhz (divided by 8)
+    Mhz8,
+}
+
+pub enum Sysclk {
+    /// HSI selected as sysclk
+    HSI,
+    /// HSE selected as sysclk
+    HSE,
+    /// CSI selected as sysclk
+    CSI,
+    /// PLL1_P selected as sysclk
+    Pll1P,
+}
+
+pub enum PllSource {
+    Hsi,
+    Csi,
+    Hse,
+}
+
+pub struct Pll {
+    /// Source clock selection.
+    pub source: PllSource,
+
+    /// PLL pre-divider (DIVM). Must be between 1 and 63.
+    pub prediv: u8,
+
+    /// PLL multiplication factor. Must be between 4 and 512.
+    pub mul: u16,
+
+    /// PLL P division factor. If None, PLL P output is disabled. Must be between 1 and 128.
+    /// On PLL1, it must be even (in particular, it cannot be 1.)
+    pub divp: Option<u16>,
+    /// PLL Q division factor. If None, PLL Q output is disabled. Must be between 1 and 128.
+    pub divq: Option<u16>,
+    /// PLL R division factor. If None, PLL R output is disabled. Must be between 1 and 128.
+    pub divr: Option<u16>,
+}
+
+/// AHB prescaler
+#[derive(Clone, Copy, PartialEq)]
+pub enum AHBPrescaler {
+    NotDivided,
+    Div2,
+    Div4,
+    Div8,
+    Div16,
+    Div64,
+    Div128,
+    Div256,
+    Div512,
+}
+
+impl AHBPrescaler {
+    fn div(&self, clk: Hertz) -> Hertz {
+        match self {
+            Self::NotDivided => clk,
+            Self::Div2 => clk / 2u32,
+            Self::Div4 => clk / 4u32,
+            Self::Div8 => clk / 8u32,
+            Self::Div16 => clk / 16u32,
+            Self::Div64 => clk / 64u32,
+            Self::Div128 => clk / 128u32,
+            Self::Div256 => clk / 256u32,
+            Self::Div512 => clk / 512u32,
+        }
+    }
+}
+
+/// APB prescaler
+#[derive(Clone, Copy)]
+pub enum APBPrescaler {
+    NotDivided,
+    Div2,
+    Div4,
+    Div8,
+    Div16,
+}
+
+impl APBPrescaler {
+    fn div(&self, clk: Hertz) -> Hertz {
+        match self {
+            Self::NotDivided => clk,
+            Self::Div2 => clk / 2u32,
+            Self::Div4 => clk / 4u32,
+            Self::Div8 => clk / 8u32,
+            Self::Div16 => clk / 16u32,
+        }
+    }
+
+    fn div_tim(&self, clk: Hertz, tim: TimerPrescaler) -> Hertz {
+        match (tim, self) {
+            // The timers kernel clock is equal to rcc_hclk1 if PPRE1 or PPRE2 corresponds to a
+            // division by 1 or 2, else it is equal to 2 x Frcc_pclk1 or 2 x Frcc_pclk2
+            (TimerPrescaler::DefaultX2, Self::NotDivided) => clk,
+            (TimerPrescaler::DefaultX2, Self::Div2) => clk,
+            (TimerPrescaler::DefaultX2, Self::Div4) => clk / 2u32,
+            (TimerPrescaler::DefaultX2, Self::Div8) => clk / 4u32,
+            (TimerPrescaler::DefaultX2, Self::Div16) => clk / 8u32,
+            // The timers kernel clock is equal to 2 x Frcc_pclk1 or 2 x Frcc_pclk2 if PPRE1 or PPRE2
+            // corresponds to a division by 1, 2 or 4, else it is equal to 4 x Frcc_pclk1 or 4 x Frcc_pclk2
+            // this makes NO SENSE and is different than in the H7. Mistake in the RM??
+            (TimerPrescaler::DefaultX4, Self::NotDivided) => clk * 2u32,
+            (TimerPrescaler::DefaultX4, Self::Div2) => clk,
+            (TimerPrescaler::DefaultX4, Self::Div4) => clk / 2u32,
+            (TimerPrescaler::DefaultX4, Self::Div8) => clk / 2u32,
+            (TimerPrescaler::DefaultX4, Self::Div16) => clk / 4u32,
+        }
+    }
+}
+
+/// APB prescaler
+#[derive(Clone, Copy)]
+pub enum TimerPrescaler {
+    DefaultX2,
+    DefaultX4,
+}
+
+impl From<TimerPrescaler> for Timpre {
+    fn from(value: TimerPrescaler) -> Self {
+        match value {
+            TimerPrescaler::DefaultX2 => Timpre::DEFAULTX2,
+            TimerPrescaler::DefaultX4 => Timpre::DEFAULTX4,
+        }
+    }
+}
+
+impl From<APBPrescaler> for Ppre {
+    fn from(val: APBPrescaler) -> Ppre {
+        match val {
+            APBPrescaler::NotDivided => Ppre::DIV1,
+            APBPrescaler::Div2 => Ppre::DIV2,
+            APBPrescaler::Div4 => Ppre::DIV4,
+            APBPrescaler::Div8 => Ppre::DIV8,
+            APBPrescaler::Div16 => Ppre::DIV16,
+        }
+    }
+}
+
+impl From<AHBPrescaler> for Hpre {
+    fn from(val: AHBPrescaler) -> Hpre {
+        match val {
+            AHBPrescaler::NotDivided => Hpre::DIV1,
+            AHBPrescaler::Div2 => Hpre::DIV2,
+            AHBPrescaler::Div4 => Hpre::DIV4,
+            AHBPrescaler::Div8 => Hpre::DIV8,
+            AHBPrescaler::Div16 => Hpre::DIV16,
+            AHBPrescaler::Div64 => Hpre::DIV64,
+            AHBPrescaler::Div128 => Hpre::DIV128,
+            AHBPrescaler::Div256 => Hpre::DIV256,
+            AHBPrescaler::Div512 => Hpre::DIV512,
+        }
+    }
+}
+
+/// Configuration of the core clocks
+#[non_exhaustive]
+pub struct Config {
+    pub hsi: Option<Hsi>,
+    pub hse: Option<Hse>,
+    pub csi: bool,
+    pub hsi48: bool,
+    pub sys: Sysclk,
+
+    pub pll1: Option<Pll>,
+    pub pll2: Option<Pll>,
+    #[cfg(rcc_h5)]
+    pub pll3: Option<Pll>,
+
+    pub ahb_pre: AHBPrescaler,
+    pub apb1_pre: APBPrescaler,
+    pub apb2_pre: APBPrescaler,
+    pub apb3_pre: APBPrescaler,
+    pub timer_prescaler: TimerPrescaler,
+
+    pub voltage_scale: VoltageScale,
+}
+
+impl Default for Config {
+    fn default() -> Self {
+        Self {
+            hsi: Some(Hsi::Mhz64),
+            hse: None,
+            csi: false,
+            hsi48: false,
+            sys: Sysclk::HSI,
+            pll1: None,
+            pll2: None,
+            #[cfg(rcc_h5)]
+            pll3: None,
+
+            ahb_pre: AHBPrescaler::NotDivided,
+            apb1_pre: APBPrescaler::NotDivided,
+            apb2_pre: APBPrescaler::NotDivided,
+            apb3_pre: APBPrescaler::NotDivided,
+            timer_prescaler: TimerPrescaler::DefaultX2,
+
+            voltage_scale: VoltageScale::Scale3,
+        }
+    }
+}
+
+pub(crate) mod sealed {
+    pub trait McoInstance {
+        type Source;
+        unsafe fn apply_clock_settings(source: Self::Source, prescaler: u8);
+    }
+}
+
+pub trait McoInstance: sealed::McoInstance + 'static {}
+
+pin_trait!(McoPin, McoInstance);
+
+macro_rules! impl_peri {
+    ($peri:ident, $source:ident, $set_source:ident, $set_prescaler:ident) => {
+        impl sealed::McoInstance for peripherals::$peri {
+            type Source = $source;
+
+            unsafe fn apply_clock_settings(source: Self::Source, prescaler: u8) {
+                RCC.cfgr().modify(|w| {
+                    w.$set_source(source);
+                    w.$set_prescaler(prescaler);
+                });
+            }
+        }
+
+        impl McoInstance for peripherals::$peri {}
+    };
+}
+
+impl_peri!(MCO1, Mco1, set_mco1, set_mco1pre);
+impl_peri!(MCO2, Mco2, set_mco2, set_mco2pre);
+
+pub struct Mco<'d, T: McoInstance> {
+    phantom: PhantomData<&'d mut T>,
+}
+
+impl<'d, T: McoInstance> Mco<'d, T> {
+    pub fn new(
+        _peri: impl Peripheral<P = T> + 'd,
+        _pin: impl Peripheral<P = impl McoPin<T>> + 'd,
+        _source: T::Source,
+    ) -> Self {
+        todo!();
+    }
+}
+
+pub(crate) unsafe fn init(config: Config) {
+    let (vos, max_clk) = match config.voltage_scale {
+        VoltageScale::Scale0 => (Vos::SCALE0, Hertz(250_000_000)),
+        VoltageScale::Scale1 => (Vos::SCALE1, Hertz(200_000_000)),
+        VoltageScale::Scale2 => (Vos::SCALE2, Hertz(150_000_000)),
+        VoltageScale::Scale3 => (Vos::SCALE3, Hertz(100_000_000)),
+    };
+
+    // Configure voltage scale.
+    PWR.voscr().modify(|w| w.set_vos(vos));
+    while !PWR.vossr().read().vosrdy() {}
+
+    // Configure HSI
+    let hsi = match config.hsi {
+        None => {
+            RCC.cr().modify(|w| w.set_hsion(false));
+            None
+        }
+        Some(hsi) => {
+            let (freq, hsidiv) = match hsi {
+                Hsi::Mhz64 => (HSI_FREQ / 1u32, Hsidiv::DIV1),
+                Hsi::Mhz32 => (HSI_FREQ / 2u32, Hsidiv::DIV2),
+                Hsi::Mhz16 => (HSI_FREQ / 4u32, Hsidiv::DIV4),
+                Hsi::Mhz8 => (HSI_FREQ / 8u32, Hsidiv::DIV8),
+            };
+            RCC.cr().modify(|w| {
+                w.set_hsidiv(hsidiv);
+                w.set_hsion(true);
+            });
+            while !RCC.cr().read().hsirdy() {}
+            Some(freq)
+        }
+    };
+
+    // Configure HSE
+    let hse = match config.hse {
+        None => {
+            RCC.cr().modify(|w| w.set_hseon(false));
+            None
+        }
+        Some(hse) => {
+            let (byp, ext) = match hse.mode {
+                HseMode::Oscillator => (false, Hseext::ANALOG),
+                HseMode::BypassAnalog => (true, Hseext::ANALOG),
+                HseMode::BypassDigital => (true, Hseext::DIGITAL),
+            };
+
+            RCC.cr().modify(|w| {
+                w.set_hsebyp(byp);
+                w.set_hseext(ext);
+            });
+            RCC.cr().modify(|w| w.set_hseon(true));
+            while !RCC.cr().read().hserdy() {}
+            Some(hse.freq)
+        }
+    };
+
+    // Configure HSI48.
+    RCC.cr().modify(|w| w.set_hsi48on(config.hsi48));
+    let _hsi48 = match config.hsi48 {
+        false => None,
+        true => {
+            while !RCC.cr().read().hsi48rdy() {}
+            Some(CSI_FREQ)
+        }
+    };
+
+    // Configure CSI.
+    RCC.cr().modify(|w| w.set_csion(config.csi));
+    let csi = match config.csi {
+        false => None,
+        true => {
+            while !RCC.cr().read().csirdy() {}
+            Some(CSI_FREQ)
+        }
+    };
+
+    // Configure PLLs.
+    let pll_input = PllInput { csi, hse, hsi };
+    let pll1 = init_pll(0, config.pll1, &pll_input);
+    let _pll2 = init_pll(1, config.pll2, &pll_input);
+    #[cfg(rcc_h5)]
+    let _pll3 = init_pll(2, config.pll3, &pll_input);
+
+    // Configure sysclk
+    let (sys, sw) = match config.sys {
+        Sysclk::HSI => (unwrap!(hsi), Sw::HSI),
+        Sysclk::HSE => (unwrap!(hse), Sw::HSE),
+        Sysclk::CSI => (unwrap!(csi), Sw::CSI),
+        Sysclk::Pll1P => (unwrap!(pll1.p), Sw::PLL1),
+    };
+    assert!(sys <= max_clk);
+
+    let hclk = config.ahb_pre.div(sys);
+
+    let apb1 = config.apb1_pre.div(hclk);
+    let apb1_tim = config.apb1_pre.div_tim(hclk, config.timer_prescaler);
+    let apb2 = config.apb2_pre.div(hclk);
+    let apb2_tim = config.apb2_pre.div_tim(hclk, config.timer_prescaler);
+    let apb3 = config.apb3_pre.div(hclk);
+
+    flash_setup(hclk, config.voltage_scale);
+
+    // Set hpre
+    let hpre = config.ahb_pre.into();
+    RCC.cfgr2().modify(|w| w.set_hpre(hpre));
+    while RCC.cfgr2().read().hpre() != hpre {}
+
+    // set ppre
+    RCC.cfgr2().modify(|w| {
+        w.set_ppre1(config.apb1_pre.into());
+        w.set_ppre2(config.apb2_pre.into());
+        w.set_ppre3(config.apb3_pre.into());
+    });
+
+    RCC.cfgr().modify(|w| w.set_timpre(config.timer_prescaler.into()));
+
+    RCC.cfgr().modify(|w| w.set_sw(sw));
+    while RCC.cfgr().read().sws() != sw {}
+
+    set_freqs(Clocks {
+        sys,
+        ahb1: hclk,
+        ahb2: hclk,
+        ahb3: hclk,
+        ahb4: hclk,
+        apb1,
+        apb2,
+        apb3,
+        apb1_tim,
+        apb2_tim,
+        adc: None,
+    });
+}
+
+struct PllInput {
+    hsi: Option<Hertz>,
+    hse: Option<Hertz>,
+    csi: Option<Hertz>,
+}
+
+struct PllOutput {
+    p: Option<Hertz>,
+    #[allow(dead_code)]
+    q: Option<Hertz>,
+    #[allow(dead_code)]
+    r: Option<Hertz>,
+}
+
+unsafe fn init_pll(num: usize, config: Option<Pll>, input: &PllInput) -> PllOutput {
+    let Some(config) = config else {
+        // Stop PLL
+        RCC.cr().modify(|w| w.set_pllon(num, false));
+        while RCC.cr().read().pllrdy(num) {}
+
+        // "To save power when PLL1 is not used, the value of PLL1M must be set to 0.""
+        RCC.pllcfgr(num).write(|w| {
+            w.set_divm(0);
+        });
+
+        return PllOutput{
+            p: None,
+            q: None,
+            r: None,
+        }
+    };
+
+    assert!(1 <= config.prediv && config.prediv <= 63);
+    assert!(4 <= config.mul && config.mul <= 512);
+
+    let (in_clk, src) = match config.source {
+        PllSource::Hsi => (unwrap!(input.hsi), Pllsrc::HSI),
+        PllSource::Hse => (unwrap!(input.hse), Pllsrc::HSE),
+        PllSource::Csi => (unwrap!(input.csi), Pllsrc::CSI),
+    };
+
+    let ref_clk = in_clk / config.prediv as u32;
+
+    let ref_range = match ref_clk.0 {
+        ..=1_999_999 => Pllrge::RANGE1,
+        ..=3_999_999 => Pllrge::RANGE2,
+        ..=7_999_999 => Pllrge::RANGE4,
+        ..=16_000_000 => Pllrge::RANGE8,
+        x => panic!("pll ref_clk out of range: {} mhz", x),
+    };
+
+    // The smaller range (150 to 420 MHz) must
+    // be chosen when the reference clock frequency is lower than 2 MHz.
+    let wide_allowed = ref_range != Pllrge::RANGE1;
+
+    let vco_clk = ref_clk * config.mul;
+    let vco_range = match vco_clk.0 {
+        VCO_MIN..=VCO_MAX => Pllvcosel::MEDIUMVCO,
+        VCO_WIDE_MIN..=VCO_WIDE_MAX if wide_allowed => Pllvcosel::WIDEVCO,
+        x => panic!("pll vco_clk out of range: {} mhz", x),
+    };
+
+    let p = config.divp.map(|div| {
+        assert!(1 <= div && div <= 128);
+        if num == 0 {
+            // on PLL1, DIVP must be even.
+            assert!(div % 2 == 0);
+        }
+
+        vco_clk / div
+    });
+    let q = config.divq.map(|div| {
+        assert!(1 <= div && div <= 128);
+        vco_clk / div
+    });
+    let r = config.divr.map(|div| {
+        assert!(1 <= div && div <= 128);
+        vco_clk / div
+    });
+
+    RCC.pllcfgr(num).write(|w| {
+        w.set_pllsrc(src);
+        w.set_divm(config.prediv);
+        w.set_pllvcosel(vco_range);
+        w.set_pllrge(ref_range);
+        w.set_pllfracen(false);
+        w.set_pllpen(p.is_some());
+        w.set_pllqen(q.is_some());
+        w.set_pllren(r.is_some());
+    });
+    RCC.plldivr(num).write(|w| {
+        w.set_plln(config.mul - 1);
+        w.set_pllp((config.divp.unwrap_or(1) - 1) as u8);
+        w.set_pllq((config.divq.unwrap_or(1) - 1) as u8);
+        w.set_pllr((config.divr.unwrap_or(1) - 1) as u8);
+    });
+
+    RCC.cr().modify(|w| w.set_pllon(num, true));
+    while !RCC.cr().read().pllrdy(num) {}
+
+    PllOutput { p, q, r }
+}
+
+fn flash_setup(clk: Hertz, vos: VoltageScale) {
+    // RM0481 Rev 1, table 37
+    // LATENCY  WRHIGHFREQ  VOS3           VOS2            VOS1            VOS0
+    //      0           0   0 to 20 MHz    0 to 30 MHz     0 to 34 MHz     0 to 42 MHz
+    //      1           0   20 to 40 MHz   30 to 60 MHz    34 to 68 MHz    42 to 84 MHz
+    //      2           1   40 to 60 MHz   60 to 90 MHz    68 to 102 MHz   84 to 126 MHz
+    //      3           1   60 to 80 MHz   90 to 120 MHz   102 to 136 MHz  126 to 168 MHz
+    //      4           2   80 to 100 MHz  120 to 150 MHz  136 to 170 MHz  168 to 210 MHz
+    //      5           2                                  170 to 200 MHz  210 to 250 MHz
+
+    // See RM0433 Rev 7 Table 17. FLASH recommended number of wait
+    // states and programming delay
+    let (latency, wrhighfreq) = match (vos, clk.0) {
+        (VoltageScale::Scale0, ..=42_000_000) => (0, 0),
+        (VoltageScale::Scale0, ..=84_000_000) => (1, 0),
+        (VoltageScale::Scale0, ..=126_000_000) => (2, 1),
+        (VoltageScale::Scale0, ..=168_000_000) => (3, 1),
+        (VoltageScale::Scale0, ..=210_000_000) => (4, 2),
+        (VoltageScale::Scale0, ..=250_000_000) => (5, 2),
+
+        (VoltageScale::Scale1, ..=34_000_000) => (0, 0),
+        (VoltageScale::Scale1, ..=68_000_000) => (1, 0),
+        (VoltageScale::Scale1, ..=102_000_000) => (2, 1),
+        (VoltageScale::Scale1, ..=136_000_000) => (3, 1),
+        (VoltageScale::Scale1, ..=170_000_000) => (4, 2),
+        (VoltageScale::Scale1, ..=200_000_000) => (5, 2),
+
+        (VoltageScale::Scale2, ..=30_000_000) => (0, 0),
+        (VoltageScale::Scale2, ..=60_000_000) => (1, 0),
+        (VoltageScale::Scale2, ..=90_000_000) => (2, 1),
+        (VoltageScale::Scale2, ..=120_000_000) => (3, 1),
+        (VoltageScale::Scale2, ..=150_000_000) => (4, 2),
+
+        (VoltageScale::Scale3, ..=20_000_000) => (0, 0),
+        (VoltageScale::Scale3, ..=40_000_000) => (1, 0),
+        (VoltageScale::Scale3, ..=60_000_000) => (2, 1),
+        (VoltageScale::Scale3, ..=80_000_000) => (3, 1),
+        (VoltageScale::Scale3, ..=100_000_000) => (4, 2),
+
+        _ => unreachable!(),
+    };
+
+    defmt::debug!("flash: latency={} wrhighfreq={}", latency, wrhighfreq);
+
+    // NOTE(unsafe) Atomic write
+    unsafe {
+        FLASH.acr().write(|w| {
+            w.set_wrhighfreq(wrhighfreq);
+            w.set_latency(latency);
+        });
+        while FLASH.acr().read().latency() != latency {}
+    }
+}

embassy-stm32/src/rcc/mod.rs

@@ -21,6 +21,7 @@ use crate::time::Hertz;
 #[cfg_attr(rcc_u5, path = "u5.rs")]
 #[cfg_attr(rcc_wb, path = "wb.rs")]
 #[cfg_attr(any(rcc_wl5, rcc_wle), path = "wl.rs")]
+#[cfg_attr(any(rcc_h5, rcc_h50), path = "h5.rs")]
 mod _version;
 pub use _version::*;
 
@@ -36,7 +37,7 @@ pub struct Clocks {
     pub apb2: Hertz,
     #[cfg(not(any(rcc_c0, rcc_g0)))]
     pub apb2_tim: Hertz,
-    #[cfg(any(rcc_wl5, rcc_wle, rcc_u5))]
+    #[cfg(any(rcc_wl5, rcc_wle, rcc_h5, rcc_h50, rcc_u5))]
     pub apb3: Hertz,
     #[cfg(any(rcc_h7, rcc_h7ab))]
     pub apb4: Hertz,
@@ -44,14 +45,16 @@ pub struct Clocks {
     // AHB
     pub ahb1: Hertz,
     #[cfg(any(
-        rcc_l4, rcc_l5, rcc_f2, rcc_f4, rcc_f410, rcc_f7, rcc_h7, rcc_h7ab, rcc_g4, rcc_u5, rcc_wb, rcc_wl5, rcc_wle
+        rcc_l4, rcc_l5, rcc_f2, rcc_f4, rcc_f410, rcc_f7, rcc_h5, rcc_h50, rcc_h7, rcc_h7ab, rcc_g4, rcc_u5, rcc_wb,
+        rcc_wl5, rcc_wle
     ))]
     pub ahb2: Hertz,
     #[cfg(any(
-        rcc_l4, rcc_l5, rcc_f2, rcc_f4, rcc_f410, rcc_f7, rcc_h7, rcc_h7ab, rcc_u5, rcc_wb, rcc_wl5, rcc_wle
+        rcc_l4, rcc_l5, rcc_f2, rcc_f4, rcc_f410, rcc_f7, rcc_h5, rcc_h50, rcc_h7, rcc_h7ab, rcc_u5, rcc_wb, rcc_wl5,
+        rcc_wle
     ))]
     pub ahb3: Hertz,
-    #[cfg(any(rcc_h7, rcc_h7ab))]
+    #[cfg(any(rcc_h5, rcc_h50, rcc_h7, rcc_h7ab))]
     pub ahb4: Hertz,
 
     #[cfg(any(rcc_f2, rcc_f4, rcc_f410, rcc_f7))]
@@ -60,7 +63,7 @@ pub struct Clocks {
     #[cfg(stm32f1)]
     pub adc: Hertz,
 
-    #[cfg(any(rcc_h7, rcc_h7ab))]
+    #[cfg(any(rcc_h5, rcc_h50, rcc_h7, rcc_h7ab))]
     pub adc: Option<Hertz>,
 }
 

embassy-stm32/src/time.rs

@@ -1,7 +1,9 @@
 //! Time units
 
+use core::ops::{Div, Mul};
+
 /// Hertz
-#[derive(PartialEq, PartialOrd, Clone, Copy, Debug, Eq)]
+#[derive(Eq, PartialEq, Ord, PartialOrd, Clone, Copy, Debug)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct Hertz(pub u32);
 
@@ -33,3 +35,45 @@ pub fn khz(kilohertz: u32) -> Hertz {
 pub fn mhz(megahertz: u32) -> Hertz {
     Hertz::mhz(megahertz)
 }
+
+impl Mul<u32> for Hertz {
+    type Output = Hertz;
+    fn mul(self, rhs: u32) -> Self::Output {
+        Hertz(self.0 * rhs)
+    }
+}
+
+impl Div<u32> for Hertz {
+    type Output = Hertz;
+    fn div(self, rhs: u32) -> Self::Output {
+        Hertz(self.0 / rhs)
+    }
+}
+
+impl Mul<u16> for Hertz {
+    type Output = Hertz;
+    fn mul(self, rhs: u16) -> Self::Output {
+        self * (rhs as u32)
+    }
+}
+
+impl Div<u16> for Hertz {
+    type Output = Hertz;
+    fn div(self, rhs: u16) -> Self::Output {
+        self / (rhs as u32)
+    }
+}
+
+impl Mul<u8> for Hertz {
+    type Output = Hertz;
+    fn mul(self, rhs: u8) -> Self::Output {
+        self * (rhs as u32)
+    }
+}
+
+impl Div<u8> for Hertz {
+    type Output = Hertz;
+    fn div(self, rhs: u8) -> Self::Output {
+        self / (rhs as u32)
+    }
+}

embassy-stm32/src/usb/usb.rs

@@ -12,22 +12,29 @@ use embassy_usb_driver as driver;
 use embassy_usb_driver::{
     Direction, EndpointAddress, EndpointAllocError, EndpointError, EndpointInfo, EndpointType, Event, Unsupported,
 };
-use pac::common::{Reg, RW};
-use pac::usb::vals::{EpType, Stat};
 
 use super::{DmPin, DpPin, Instance};
 use crate::gpio::sealed::AFType;
 use crate::interrupt::InterruptExt;
 use crate::pac::usb::regs;
+use crate::pac::usb::vals::{EpType, Stat};
+use crate::pac::USBRAM;
 use crate::rcc::sealed::RccPeripheral;
-use crate::{pac, Peripheral};
+use crate::Peripheral;
 
 const EP_COUNT: usize = 8;
 
-#[cfg(any(usb_v1_x1, usb_v1_x2))]
+#[cfg(any(usbram_16x1_512, usbram_16x2_512))]
-const EP_MEMORY_SIZE: usize = 512;
+const USBRAM_SIZE: usize = 512;
-#[cfg(not(any(usb_v1_x1, usb_v1_x2)))]
+#[cfg(usbram_16x2_1024)]
-const EP_MEMORY_SIZE: usize = 1024;
+const USBRAM_SIZE: usize = 1024;
+#[cfg(usbram_32_2048)]
+const USBRAM_SIZE: usize = 2048;
+
+#[cfg(not(usbram_32_2048))]
+const USBRAM_ALIGN: usize = 2;
+#[cfg(usbram_32_2048)]
+const USBRAM_ALIGN: usize = 4;
 
 const NEW_AW: AtomicWaker = AtomicWaker::new();
 static BUS_WAKER: AtomicWaker = NEW_AW;
@@ -57,25 +64,60 @@ fn invariant(mut r: regs::Epr) -> regs::Epr {
     r
 }
 
+fn align_len_up(len: u16) -> u16 {
+    ((len as usize + USBRAM_ALIGN - 1) / USBRAM_ALIGN * USBRAM_ALIGN) as u16
+}
+
 // Returns (actual_len, len_bits)
 fn calc_out_len(len: u16) -> (u16, u16) {
     match len {
-        2..=62 => ((len + 1) / 2 * 2, ((len + 1) / 2) << 10),
+        // NOTE: this could be 2..=62 with 16bit USBRAM, but not with 32bit. Limit it to 60 for simplicity.
-        63..=480 => ((len + 31) / 32 * 32, (((len + 31) / 32 - 1) << 10) | 0x8000),
+        2..=60 => (align_len_up(len), align_len_up(len) / 2 << 10),
+        61..=1024 => ((len + 31) / 32 * 32, (((len + 31) / 32 - 1) << 10) | 0x8000),
         _ => panic!("invalid OUT length {}", len),
     }
 }
-fn ep_in_addr<T: Instance>(index: usize) -> Reg<u16, RW> {
+
-    T::regs().ep_mem(index * 4 + 0)
+#[cfg(not(usbram_32_2048))]
+mod btable {
+    use super::*;
+
+    pub(super) unsafe fn write_in<T: Instance>(index: usize, addr: u16) {
+        USBRAM.mem(index * 4 + 0).write_value(addr);
+    }
+
+    pub(super) unsafe fn write_in_len<T: Instance>(index: usize, _addr: u16, len: u16) {
+        USBRAM.mem(index * 4 + 1).write_value(len);
+    }
+
+    pub(super) unsafe fn write_out<T: Instance>(index: usize, addr: u16, max_len_bits: u16) {
+        USBRAM.mem(index * 4 + 2).write_value(addr);
+        USBRAM.mem(index * 4 + 3).write_value(max_len_bits);
+    }
+
+    pub(super) unsafe fn read_out_len<T: Instance>(index: usize) -> u16 {
+        USBRAM.mem(index * 4 + 3).read()
+    }
 }
-fn ep_in_len<T: Instance>(index: usize) -> Reg<u16, RW> {
+#[cfg(usbram_32_2048)]
-    T::regs().ep_mem(index * 4 + 1)
+mod btable {
-}
+    use super::*;
-fn ep_out_addr<T: Instance>(index: usize) -> Reg<u16, RW> {
+
-    T::regs().ep_mem(index * 4 + 2)
+    pub(super) unsafe fn write_in<T: Instance>(_index: usize, _addr: u16) {}
-}
+
-fn ep_out_len<T: Instance>(index: usize) -> Reg<u16, RW> {
+    pub(super) unsafe fn write_in_len<T: Instance>(index: usize, addr: u16, len: u16) {
-    T::regs().ep_mem(index * 4 + 3)
+        USBRAM.mem(index * 2).write_value((addr as u32) | ((len as u32) << 16));
+    }
+
+    pub(super) unsafe fn write_out<T: Instance>(index: usize, addr: u16, max_len_bits: u16) {
+        USBRAM
+            .mem(index * 2 + 1)
+            .write_value((addr as u32) | ((max_len_bits as u32) << 16));
+    }
+
+    pub(super) unsafe fn read_out_len<T: Instance>(index: usize) -> u16 {
+        (USBRAM.mem(index * 2 + 1).read() >> 16) as u16
+    }
 }
 
 struct EndpointBuffer<T: Instance> {
@@ -87,23 +129,25 @@ struct EndpointBuffer<T: Instance> {
 impl<T: Instance> EndpointBuffer<T> {
     fn read(&mut self, buf: &mut [u8]) {
         assert!(buf.len() <= self.len as usize);
-        for i in 0..((buf.len() + 1) / 2) {
+        for i in 0..(buf.len() + USBRAM_ALIGN - 1) / USBRAM_ALIGN {
-            let val = unsafe { T::regs().ep_mem(self.addr as usize / 2 + i).read() };
+            let val = unsafe { USBRAM.mem(self.addr as usize / USBRAM_ALIGN + i).read() };
-            buf[i * 2] = val as u8;
+            let n = USBRAM_ALIGN.min(buf.len() - i * USBRAM_ALIGN);
-            if i * 2 + 1 < buf.len() {
+            buf[i * USBRAM_ALIGN..][..n].copy_from_slice(&val.to_le_bytes()[..n]);
-                buf[i * 2 + 1] = (val >> 8) as u8;
-            }
         }
     }
 
     fn write(&mut self, buf: &[u8]) {
         assert!(buf.len() <= self.len as usize);
-        for i in 0..((buf.len() + 1) / 2) {
+        for i in 0..(buf.len() + USBRAM_ALIGN - 1) / USBRAM_ALIGN {
-            let mut val = buf[i * 2] as u16;
+            let mut val = [0u8; USBRAM_ALIGN];
-            if i * 2 + 1 < buf.len() {
+            let n = USBRAM_ALIGN.min(buf.len() - i * USBRAM_ALIGN);
-                val |= (buf[i * 2 + 1] as u16) << 8;
+            val[..n].copy_from_slice(&buf[i * USBRAM_ALIGN..][..n]);
-            }
+
-            unsafe { T::regs().ep_mem(self.addr as usize / 2 + i).write_value(val) };
+            #[cfg(not(usbram_32_2048))]
+            let val = u16::from_le_bytes(val);
+            #[cfg(usbram_32_2048)]
+            let val = u32::from_le_bytes(val);
+            unsafe { USBRAM.mem(self.addr as usize / USBRAM_ALIGN + i).write_value(val) };
         }
     }
 }
@@ -139,8 +183,12 @@ impl<'d, T: Instance> Driver<'d, T> {
         #[cfg(stm32l5)]
         unsafe {
             crate::peripherals::PWR::enable();
+            crate::pac::PWR.cr2().modify(|w| w.set_usv(true));
+        }
 
-            pac::PWR.cr2().modify(|w| w.set_usv(true));
+        #[cfg(pwr_h5)]
+        unsafe {
+            crate::pac::PWR.usbscr().modify(|w| w.set_usb33sv(true))
         }
 
         unsafe {
@@ -256,8 +304,9 @@ impl<'d, T: Instance> Driver<'d, T> {
     }
 
     fn alloc_ep_mem(&mut self, len: u16) -> u16 {
+        assert!(len as usize % USBRAM_ALIGN == 0);
         let addr = self.ep_mem_free;
-        if addr + len > EP_MEMORY_SIZE as _ {
+        if addr + len > USBRAM_SIZE as _ {
             panic!("Endpoint memory full");
         }
         self.ep_mem_free += len;
@@ -306,10 +355,7 @@ impl<'d, T: Instance> Driver<'d, T> {
                 let addr = self.alloc_ep_mem(len);
 
                 trace!("  len_bits = {:04x}", len_bits);
-                unsafe {
+                unsafe { btable::write_out::<T>(index, addr, len_bits) }
-                    ep_out_addr::<T>(index).write_value(addr);
-                    ep_out_len::<T>(index).write_value(len_bits);
-                }
 
                 EndpointBuffer {
                     addr,
@@ -321,13 +367,11 @@ impl<'d, T: Instance> Driver<'d, T> {
                 assert!(!ep.used_in);
                 ep.used_in = true;
 
-                let len = (max_packet_size + 1) / 2 * 2;
+                let len = align_len_up(max_packet_size);
                 let addr = self.alloc_ep_mem(len);
 
-                unsafe {
+                // ep_in_len is written when actually TXing packets.
-                    ep_in_addr::<T>(index).write_value(addr);
+                unsafe { btable::write_in::<T>(index, addr) }
-                    // ep_in_len is written when actually TXing packets.
-                }
 
                 EndpointBuffer {
                     addr,
@@ -398,7 +442,7 @@ impl<'d, T: Instance> driver::Driver<'d> for Driver<'d, T> {
                 w.set_ctrm(true);
             });
 
-            #[cfg(usb_v3)]
+            #[cfg(any(usb_v3, usb_v4))]
             regs.bcdr().write(|w| w.set_dppu(true))
         }
 
@@ -633,12 +677,12 @@ impl<'d, T: Instance, D> Endpoint<'d, T, D> {
     fn write_data(&mut self, buf: &[u8]) {
         let index = self.info.addr.index();
         self.buf.write(buf);
-        unsafe { ep_in_len::<T>(index).write_value(buf.len() as _) };
+        unsafe { btable::write_in_len::<T>(index, self.buf.addr, buf.len() as _) }
     }
 
     fn read_data(&mut self, buf: &mut [u8]) -> Result<usize, EndpointError> {
         let index = self.info.addr.index();
-        let rx_len = unsafe { ep_out_len::<T>(index).read() as usize } & 0x3FF;
+        let rx_len = unsafe { btable::read_out_len::<T>(index) as usize } & 0x3FF;
         trace!("READ DONE, rx_len = {}", rx_len);
         if rx_len > buf.len() {
             return Err(EndpointError::BufferOverflow);

examples/stm32h5/.cargo/config.toml

@@ -0,0 +1,8 @@
+[target.thumbv8m.main-none-eabihf]
+runner = 'probe-rs-cli run --chip STM32H563ZITx'
+
+[build]
+target = "thumbv8m.main-none-eabihf"
+
+[env]
+DEFMT_LOG = "trace"

examples/stm32h5/Cargo.toml

@@ -0,0 +1,71 @@
+[package]
+edition = "2021"
+name = "embassy-stm32h7-examples"
+version = "0.1.0"
+license = "MIT OR Apache-2.0"
+
+[dependencies]
+embassy-sync = { version = "0.1.0", path = "../../embassy-sync", features = ["defmt"] }
+embassy-executor = { version = "0.1.0", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-time = { version = "0.1.0", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "unstable-traits", "tick-hz-32_768"] }
+embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "stm32h563zi", "time-driver-any", "exti", "unstable-pac", "unstable-traits"] }
+embassy-net = { path = "../../embassy-net", features = ["defmt", "nightly", "tcp", "dhcpv4", "medium-ethernet", "unstable-traits", "proto-ipv6"] }
+embedded-io = { version = "0.4.0", features = ["async"] }
+embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"] }
+
+defmt = "0.3"
+defmt-rtt = "0.4"
+
+cortex-m = { version = "0.7.6", features = ["critical-section-single-core"] }
+cortex-m-rt = "0.7.0"
+embedded-hal = "0.2.6"
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-alpha.9" }
+embedded-hal-async = { version = "=0.2.0-alpha.0" }
+embedded-nal-async = "0.4.0"
+panic-probe = { version = "0.3", features = ["print-defmt"] }
+futures = { version = "0.3.17", default-features = false, features = ["async-await"] }
+heapless = { version = "0.7.5", default-features = false }
+rand_core = "0.6.3"
+critical-section = "1.1"
+micromath = "2.0.0"
+stm32-fmc = "0.2.4"
+embedded-storage = "0.3.0"
+static_cell = "1.0"
+
+# cargo build/run
+[profile.dev]
+codegen-units = 1
+debug = 2
+debug-assertions = true # <-
+incremental = false
+opt-level = 3 # <-
+overflow-checks = true # <-
+
+# cargo test
+[profile.test]
+codegen-units = 1
+debug = 2
+debug-assertions = true # <-
+incremental = false
+opt-level = 3 # <-
+overflow-checks = true # <-
+
+# cargo build/run --release
+[profile.release]
+codegen-units = 1
+debug = 2
+debug-assertions = false # <-
+incremental = false
+lto = 'fat'
+opt-level = 3 # <-
+overflow-checks = false # <-
+
+# cargo test --release
+[profile.bench]
+codegen-units = 1
+debug = 2
+debug-assertions = false # <-
+incremental = false
+lto = 'fat'
+opt-level = 3 # <-
+overflow-checks = false # <-

examples/stm32h5/build.rs

@@ -0,0 +1,5 @@
+fn main() {
+    println!("cargo:rustc-link-arg-bins=--nmagic");
+    println!("cargo:rustc-link-arg-bins=-Tlink.x");
+    println!("cargo:rustc-link-arg-bins=-Tdefmt.x");
+}

examples/stm32h5/memory.x

@@ -0,0 +1,5 @@
+MEMORY
+{
+    FLASH : ORIGIN = 0x08000000, LENGTH = 0x200000
+    RAM   : ORIGIN = 0x20000000, LENGTH =  0x50000
+}

examples/stm32h5/src/bin/blinky.rs

@@ -0,0 +1,27 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::gpio::{Level, Output, Speed};
+use embassy_time::{Duration, Timer};
+use {defmt_rtt as _, panic_probe as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_stm32::init(Default::default());
+    info!("Hello World!");
+
+    let mut led = Output::new(p.PB0, Level::High, Speed::Low);
+
+    loop {
+        info!("high");
+        led.set_high();
+        Timer::after(Duration::from_millis(500)).await;
+
+        info!("low");
+        led.set_low();
+        Timer::after(Duration::from_millis(500)).await;
+    }
+}

examples/stm32h5/src/bin/button_exti.rs

@@ -0,0 +1,27 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::exti::ExtiInput;
+use embassy_stm32::gpio::{Input, Pull};
+use {defmt_rtt as _, panic_probe as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_stm32::init(Default::default());
+    info!("Hello World!");
+
+    let button = Input::new(p.PC13, Pull::Down);
+    let mut button = ExtiInput::new(button, p.EXTI13);
+
+    info!("Press the USER button...");
+
+    loop {
+        button.wait_for_rising_edge().await;
+        info!("Pressed!");
+        button.wait_for_falling_edge().await;
+        info!("Released!");
+    }
+}

examples/stm32h5/src/bin/eth.rs

@@ -0,0 +1,133 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_net::tcp::TcpSocket;
+use embassy_net::{Ipv4Address, Stack, StackResources};
+use embassy_stm32::eth::generic_smi::GenericSMI;
+use embassy_stm32::eth::{Ethernet, PacketQueue};
+use embassy_stm32::peripherals::ETH;
+use embassy_stm32::rcc::{AHBPrescaler, APBPrescaler, Hse, HseMode, Pll, PllSource, Sysclk, VoltageScale};
+use embassy_stm32::rng::Rng;
+use embassy_stm32::time::Hertz;
+use embassy_stm32::{interrupt, Config};
+use embassy_time::{Duration, Timer};
+use embedded_io::asynch::Write;
+use rand_core::RngCore;
+use static_cell::StaticCell;
+use {defmt_rtt as _, panic_probe as _};
+
+macro_rules! singleton {
+    ($val:expr) => {{
+        type T = impl Sized;
+        static STATIC_CELL: StaticCell<T> = StaticCell::new();
+        let (x,) = STATIC_CELL.init(($val,));
+        x
+    }};
+}
+
+type Device = Ethernet<'static, ETH, GenericSMI>;
+
+#[embassy_executor::task]
+async fn net_task(stack: &'static Stack<Device>) -> ! {
+    stack.run().await
+}
+
+#[embassy_executor::main]
+async fn main(spawner: Spawner) -> ! {
+    let mut config = Config::default();
+    config.rcc.hsi = None;
+    config.rcc.hsi48 = true; // needed for rng
+    config.rcc.hse = Some(Hse {
+        freq: Hertz(8_000_000),
+        mode: HseMode::BypassDigital,
+    });
+    config.rcc.pll1 = Some(Pll {
+        source: PllSource::Hse,
+        prediv: 2,
+        mul: 125,
+        divp: Some(2),
+        divq: Some(2),
+        divr: None,
+    });
+    config.rcc.ahb_pre = AHBPrescaler::NotDivided;
+    config.rcc.apb1_pre = APBPrescaler::NotDivided;
+    config.rcc.apb2_pre = APBPrescaler::NotDivided;
+    config.rcc.apb3_pre = APBPrescaler::NotDivided;
+    config.rcc.sys = Sysclk::Pll1P;
+    config.rcc.voltage_scale = VoltageScale::Scale0;
+    let p = embassy_stm32::init(config);
+    info!("Hello World!");
+
+    // Generate random seed.
+    let mut rng = Rng::new(p.RNG);
+    let mut seed = [0; 8];
+    rng.fill_bytes(&mut seed);
+    let seed = u64::from_le_bytes(seed);
+
+    let eth_int = interrupt::take!(ETH);
+    let mac_addr = [0x00, 0x00, 0xDE, 0xAD, 0xBE, 0xEF];
+
+    let device = Ethernet::new(
+        singleton!(PacketQueue::<4, 4>::new()),
+        p.ETH,
+        eth_int,
+        p.PA1,
+        p.PA2,
+        p.PC1,
+        p.PA7,
+        p.PC4,
+        p.PC5,
+        p.PG13,
+        p.PB15,
+        p.PG11,
+        GenericSMI,
+        mac_addr,
+        0,
+    );
+
+    let config = embassy_net::Config::Dhcp(Default::default());
+    //let config = embassy_net::Config::Static(embassy_net::StaticConfig {
+    //    address: Ipv4Cidr::new(Ipv4Address::new(10, 42, 0, 61), 24),
+    //    dns_servers: Vec::new(),
+    //    gateway: Some(Ipv4Address::new(10, 42, 0, 1)),
+    //});
+
+    // Init network stack
+    let stack = &*singleton!(Stack::new(device, config, singleton!(StackResources::<2>::new()), seed));
+
+    // Launch network task
+    unwrap!(spawner.spawn(net_task(&stack)));
+
+    info!("Network task initialized");
+
+    // Then we can use it!
+    let mut rx_buffer = [0; 1024];
+    let mut tx_buffer = [0; 1024];
+
+    loop {
+        let mut socket = TcpSocket::new(&stack, &mut rx_buffer, &mut tx_buffer);
+
+        socket.set_timeout(Some(embassy_net::SmolDuration::from_secs(10)));
+
+        let remote_endpoint = (Ipv4Address::new(10, 42, 0, 1), 8000);
+        info!("connecting...");
+        let r = socket.connect(remote_endpoint).await;
+        if let Err(e) = r {
+            info!("connect error: {:?}", e);
+            Timer::after(Duration::from_secs(3)).await;
+            continue;
+        }
+        info!("connected!");
+        loop {
+            let r = socket.write_all(b"Hello\n").await;
+            if let Err(e) = r {
+                info!("write error: {:?}", e);
+                continue;
+            }
+            Timer::after(Duration::from_secs(1)).await;
+        }
+    }
+}

examples/stm32h5/src/bin/i2c.rs

@@ -0,0 +1,44 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::i2c::{Error, I2c, TimeoutI2c};
+use embassy_stm32::interrupt;
+use embassy_stm32::time::Hertz;
+use embassy_time::Duration;
+use {defmt_rtt as _, panic_probe as _};
+
+const ADDRESS: u8 = 0x5F;
+const WHOAMI: u8 = 0x0F;
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    info!("Hello world!");
+    let p = embassy_stm32::init(Default::default());
+
+    let irq = interrupt::take!(I2C2_EV);
+    let mut i2c = I2c::new(
+        p.I2C2,
+        p.PB10,
+        p.PB11,
+        irq,
+        p.GPDMA1_CH4,
+        p.GPDMA1_CH5,
+        Hertz(100_000),
+        Default::default(),
+    );
+
+    // I2C bus can freeze if SCL line is shorted or due to a broken device that clock stretches for too long.
+    // TimeoutI2c allows recovering from such errors by throwing `Error::Timeout` after a given delay.
+    let mut timeout_i2c = TimeoutI2c::new(&mut i2c, Duration::from_millis(1000));
+
+    let mut data = [0u8; 1];
+
+    match timeout_i2c.blocking_write_read(ADDRESS, &[WHOAMI], &mut data) {
+        Ok(()) => info!("Whoami: {}", data[0]),
+        Err(Error::Timeout) => error!("Operation timed out"),
+        Err(e) => error!("I2c Error: {:?}", e),
+    }
+}

examples/stm32h5/src/bin/rng.rs

@@ -0,0 +1,20 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::rng::Rng;
+use {defmt_rtt as _, panic_probe as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_stm32::init(Default::default());
+    info!("Hello World!");
+
+    let mut rng = Rng::new(p.RNG);
+
+    let mut buf = [0u8; 16];
+    unwrap!(rng.async_fill_bytes(&mut buf).await);
+    info!("random bytes: {:02x}", buf);
+}

examples/stm32h5/src/bin/usart.rs

@@ -0,0 +1,43 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use cortex_m_rt::entry;
+use defmt::*;
+use embassy_executor::Executor;
+use embassy_stm32::dma::NoDma;
+use embassy_stm32::interrupt;
+use embassy_stm32::usart::{Config, Uart};
+use static_cell::StaticCell;
+use {defmt_rtt as _, panic_probe as _};
+
+#[embassy_executor::task]
+async fn main_task() {
+    let p = embassy_stm32::init(Default::default());
+
+    let config = Config::default();
+    let irq = interrupt::take!(UART7);
+    let mut usart = Uart::new(p.UART7, p.PF6, p.PF7, irq, NoDma, NoDma, config);
+
+    unwrap!(usart.blocking_write(b"Hello Embassy World!\r\n"));
+    info!("wrote Hello, starting echo");
+
+    let mut buf = [0u8; 1];
+    loop {
+        unwrap!(usart.blocking_read(&mut buf));
+        unwrap!(usart.blocking_write(&buf));
+    }
+}
+
+static EXECUTOR: StaticCell<Executor> = StaticCell::new();
+
+#[entry]
+fn main() -> ! {
+    info!("Hello World!");
+
+    let executor = EXECUTOR.init(Executor::new());
+
+    executor.run(|spawner| {
+        unwrap!(spawner.spawn(main_task()));
+    })
+}

examples/stm32h5/src/bin/usart_dma.rs

@@ -0,0 +1,46 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use core::fmt::Write;
+
+use cortex_m_rt::entry;
+use defmt::*;
+use embassy_executor::Executor;
+use embassy_stm32::dma::NoDma;
+use embassy_stm32::interrupt;
+use embassy_stm32::usart::{Config, Uart};
+use heapless::String;
+use static_cell::StaticCell;
+use {defmt_rtt as _, panic_probe as _};
+
+#[embassy_executor::task]
+async fn main_task() {
+    let p = embassy_stm32::init(Default::default());
+
+    let config = Config::default();
+    let irq = interrupt::take!(UART7);
+    let mut usart = Uart::new(p.UART7, p.PF6, p.PF7, irq, p.GPDMA1_CH0, NoDma, config);
+
+    for n in 0u32.. {
+        let mut s: String<128> = String::new();
+        core::write!(&mut s, "Hello DMA World {}!\r\n", n).unwrap();
+
+        usart.write(s.as_bytes()).await.ok();
+
+        info!("wrote DMA");
+    }
+}
+
+static EXECUTOR: StaticCell<Executor> = StaticCell::new();
+
+#[entry]
+fn main() -> ! {
+    info!("Hello World!");
+
+    let executor = EXECUTOR.init(Executor::new());
+
+    executor.run(|spawner| {
+        unwrap!(spawner.spawn(main_task()));
+    })
+}

examples/stm32h5/src/bin/usart_split.rs

@@ -0,0 +1,58 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::dma::NoDma;
+use embassy_stm32::interrupt;
+use embassy_stm32::peripherals::{GPDMA1_CH1, UART7};
+use embassy_stm32::usart::{Config, Uart, UartRx};
+use embassy_sync::blocking_mutex::raw::ThreadModeRawMutex;
+use embassy_sync::channel::Channel;
+use {defmt_rtt as _, panic_probe as _};
+
+#[embassy_executor::task]
+async fn writer(mut usart: Uart<'static, UART7, NoDma, NoDma>) {
+    unwrap!(usart.blocking_write(b"Hello Embassy World!\r\n"));
+    info!("wrote Hello, starting echo");
+
+    let mut buf = [0u8; 1];
+    loop {
+        unwrap!(usart.blocking_read(&mut buf));
+        unwrap!(usart.blocking_write(&buf));
+    }
+}
+
+static CHANNEL: Channel<ThreadModeRawMutex, [u8; 8], 1> = Channel::new();
+
+#[embassy_executor::main]
+async fn main(spawner: Spawner) -> ! {
+    let p = embassy_stm32::init(Default::default());
+    info!("Hello World!");
+
+    let config = Config::default();
+    let irq = interrupt::take!(UART7);
+    let mut usart = Uart::new(p.UART7, p.PF6, p.PF7, irq, p.GPDMA1_CH0, p.GPDMA1_CH1, config);
+    unwrap!(usart.blocking_write(b"Type 8 chars to echo!\r\n"));
+
+    let (mut tx, rx) = usart.split();
+
+    unwrap!(spawner.spawn(reader(rx)));
+
+    loop {
+        let buf = CHANNEL.recv().await;
+        info!("writing...");
+        unwrap!(tx.write(&buf).await);
+    }
+}
+
+#[embassy_executor::task]
+async fn reader(mut rx: UartRx<'static, UART7, GPDMA1_CH1>) {
+    let mut buf = [0; 8];
+    loop {
+        info!("reading...");
+        unwrap!(rx.read(&mut buf).await);
+        CHANNEL.send(buf).await;
+    }
+}

examples/stm32h5/src/bin/usb_serial.rs

@@ -0,0 +1,128 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::{panic, *};
+use embassy_executor::Spawner;
+use embassy_stm32::rcc::{AHBPrescaler, APBPrescaler, Hse, HseMode, Pll, PllSource, Sysclk, VoltageScale};
+use embassy_stm32::time::Hertz;
+use embassy_stm32::usb::{Driver, Instance};
+use embassy_stm32::{interrupt, pac, Config};
+use embassy_usb::class::cdc_acm::{CdcAcmClass, State};
+use embassy_usb::driver::EndpointError;
+use embassy_usb::Builder;
+use futures::future::join;
+use {defmt_rtt as _, panic_probe as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let mut config = Config::default();
+    config.rcc.hsi = None;
+    config.rcc.hsi48 = true; // needed for usb
+    config.rcc.hse = Some(Hse {
+        freq: Hertz(8_000_000),
+        mode: HseMode::BypassDigital,
+    });
+    config.rcc.pll1 = Some(Pll {
+        source: PllSource::Hse,
+        prediv: 2,
+        mul: 125,
+        divp: Some(2), // 250mhz
+        divq: None,
+        divr: None,
+    });
+    config.rcc.ahb_pre = AHBPrescaler::Div2;
+    config.rcc.apb1_pre = APBPrescaler::Div4;
+    config.rcc.apb2_pre = APBPrescaler::Div2;
+    config.rcc.apb3_pre = APBPrescaler::Div4;
+    config.rcc.sys = Sysclk::Pll1P;
+    config.rcc.voltage_scale = VoltageScale::Scale0;
+    let p = embassy_stm32::init(config);
+
+    info!("Hello World!");
+
+    unsafe {
+        pac::RCC.ccipr4().write(|w| {
+            w.set_usbsel(pac::rcc::vals::Usbsel::HSI48);
+        });
+    }
+
+    // Create the driver, from the HAL.
+    let irq = interrupt::take!(USB_DRD_FS);
+    let driver = Driver::new(p.USB, irq, p.PA12, p.PA11);
+
+    // Create embassy-usb Config
+    let mut config = embassy_usb::Config::new(0xc0de, 0xcafe);
+    config.manufacturer = Some("Embassy");
+    config.product = Some("USB-serial example");
+    config.serial_number = Some("12345678");
+
+    // Required for windows compatiblity.
+    // https://developer.nordicsemi.com/nRF_Connect_SDK/doc/1.9.1/kconfig/CONFIG_CDC_ACM_IAD.html#help
+    config.device_class = 0xEF;
+    config.device_sub_class = 0x02;
+    config.device_protocol = 0x01;
+    config.composite_with_iads = true;
+
+    // Create embassy-usb DeviceBuilder using the driver and config.
+    // It needs some buffers for building the descriptors.
+    let mut device_descriptor = [0; 256];
+    let mut config_descriptor = [0; 256];
+    let mut bos_descriptor = [0; 256];
+    let mut control_buf = [0; 64];
+
+    let mut state = State::new();
+
+    let mut builder = Builder::new(
+        driver,
+        config,
+        &mut device_descriptor,
+        &mut config_descriptor,
+        &mut bos_descriptor,
+        &mut control_buf,
+    );
+
+    // Create classes on the builder.
+    let mut class = CdcAcmClass::new(&mut builder, &mut state, 64);
+
+    // Build the builder.
+    let mut usb = builder.build();
+
+    // Run the USB device.
+    let usb_fut = usb.run();
+
+    // Do stuff with the class!
+    let echo_fut = async {
+        loop {
+            class.wait_connection().await;
+            info!("Connected");
+            let _ = echo(&mut class).await;
+            info!("Disconnected");
+        }
+    };
+
+    // Run everything concurrently.
+    // If we had made everything `'static` above instead, we could do this using separate tasks instead.
+    join(usb_fut, echo_fut).await;
+}
+
+struct Disconnected {}
+
+impl From<EndpointError> for Disconnected {
+    fn from(val: EndpointError) -> Self {
+        match val {
+            EndpointError::BufferOverflow => panic!("Buffer overflow"),
+            EndpointError::Disabled => Disconnected {},
+        }
+    }
+}
+
+async fn echo<'d, T: Instance + 'd>(class: &mut CdcAcmClass<'d, Driver<'d, T>>) -> Result<(), Disconnected> {
+    let mut buf = [0; 64];
+    loop {
+        let n = class.read_packet(&mut buf).await?;
+        let data = &buf[..n];
+        info!("data: {:x}", data);
+        class.write_packet(data).await?;
+    }
+}