nrf/uarte: update to new api

embassy-nrf-examples/src/bin/uart.rs

@@ -12,38 +12,26 @@ use cortex_m_rt::entry;
 use defmt::panic;
 use embassy::executor::{task, Executor};
 use embassy::time::{Duration, Timer};
-use embassy::traits::uart::Uart;
+use embassy::traits::uart::{Read, Write};
 use embassy::util::Forever;
-use embassy_nrf::{interrupt, pac, rtc, uarte};
+use embassy_nrf::{interrupt, pac, rtc, uarte, Peripherals};
 use futures::future::{select, Either};
+use futures::pin_mut;
 use nrf52840_hal::clocks;
 use nrf52840_hal::gpio;
 
 #[task]
-async fn run(uart: pac::UARTE0, port: pac::P0) {
+async fn run() {
-    // Init UART
+    let p = Peripherals::take().unwrap();
-    let port0 = gpio::p0::Parts::new(port);
 
-    let pins = uarte::Pins {
+    let mut config = uarte::Config::default();
-        rxd: port0.p0_08.into_floating_input().degrade(),
+    config.parity = uarte::Parity::EXCLUDED;
-        txd: port0
+    config.baudrate = uarte::Baudrate::BAUD115200;
-            .p0_06
-            .into_push_pull_output(gpio::Level::Low)
-            .degrade(),
-        cts: None,
-        rts: None,
-    };
 
-    // NOTE(unsafe): Safe becasue we do not use `mem::forget` anywhere.
+    let irq = interrupt::take!(UARTE0_UART0);
-    let mut uart = unsafe {
+    let uart =
-        uarte::Uarte::new(
+        unsafe { uarte::Uarte::new(p.uarte0, irq, p.p0_08, p.p0_06, p.p0_07, p.p0_05, config) };
-            uart,
+    pin_mut!(uart);
-            interrupt::take!(UARTE0_UART0),
-            pins,
-            uarte::Parity::EXCLUDED,
-            uarte::Baudrate::BAUD115200,
-        )
-    };
 
     info!("uarte initialized!");
 
@@ -51,19 +39,22 @@ async fn run(uart: pac::UARTE0, port: pac::P0) {
     let mut buf = [0; 8];
     buf.copy_from_slice(b"Hello!\r\n");
 
-    unwrap!(uart.send(&buf).await);
+    unwrap!(uart.as_mut().write(&buf).await);
     info!("wrote hello in uart!");
 
     loop {
-        let buf_len = buf.len();
         info!("reading...");
+        unwrap!(uart.as_mut().read(&mut buf).await);
+        info!("writing...");
+        unwrap!(uart.as_mut().write(&buf).await);
 
+        /*
         // `receive()` doesn't return until the buffer has been completely filled with
         // incoming data, which in this case is 8 bytes.
         //
         // This example shows how to use `select` to run an uart receive concurrently with a
         // 1 second timer, effectively adding a timeout to the receive operation.
-        let recv_fut = uart.receive(&mut buf);
+        let recv_fut = uart.read(&mut buf);
         let timer_fut = Timer::after(Duration::from_millis(1000));
         let received_len = match select(recv_fut, timer_fut).await {
             // recv_fut completed first, so we've received `buf_len` bytes.
@@ -81,8 +72,9 @@ async fn run(uart: pac::UARTE0, port: pac::P0) {
             info!("read done, got {}", received);
 
             // Echo back received data
-            unwrap!(uart.send(received).await);
+            unwrap!(uart.write(received).await);
         }
+         */
     }
 }
 
@@ -110,9 +102,7 @@ fn main() -> ! {
     let executor = EXECUTOR.put(Executor::new());
     executor.set_alarm(alarm);
 
-    let uarte0 = p.UARTE0;
-    let p0 = p.P0;
     executor.run(|spawner| {
-        unwrap!(spawner.spawn(run(uarte0, p0)));
+        unwrap!(spawner.spawn(run()));
     });
 }

embassy-nrf/src/uarte.rs

@@ -5,43 +5,49 @@
 //! are dropped correctly (e.g. not using `mem::forget()`).
 
 use core::future::Future;
-use core::ops::Deref;
+use core::marker::PhantomData;
+use core::pin::Pin;
 use core::sync::atomic::{compiler_fence, Ordering};
-use core::task::{Context, Poll};
+use core::task::Poll;
-
+use embassy::traits::uart::{Error, Read, Write};
-use embassy::interrupt::InterruptExt;
+use embassy::util::{wake_on_interrupt, OnDrop, PeripheralBorrow, Signal};
-use embassy::util::Signal;
+use embassy_extras::unborrow;
+use futures::future::poll_fn;
 
 use crate::fmt::{assert, *};
+use crate::gpio::Pin as GpioPin;
 use crate::hal::pac;
-use crate::hal::prelude::*;
 use crate::hal::target_constants::EASY_DMA_SIZE;
 use crate::interrupt;
 use crate::interrupt::Interrupt;
+use crate::peripherals;
 
-pub use crate::hal::uarte::Pins;
 // Re-export SVD variants to allow user to directly set values.
 pub use pac::uarte0::{baudrate::BAUDRATE_A as Baudrate, config::PARITY_A as Parity};
 
+#[non_exhaustive]
+pub struct Config {
+    pub parity: Parity,
+    pub baudrate: Baudrate,
+}
+
+impl Default for Config {
+    fn default() -> Self {
+        Self {
+            parity: Parity::EXCLUDED,
+            baudrate: Baudrate::BAUD115200,
+        }
+    }
+}
+
 /// Interface to the UARTE peripheral
-pub struct Uarte<T>
+pub struct Uarte<'d, T: Instance> {
-where
+    peri: T,
-    T: Instance,
-{
-    instance: T,
     irq: T::Interrupt,
-    pins: Pins,
+    phantom: PhantomData<&'d mut T>,
 }
 
-pub struct State {
+impl<'d, T: Instance> Uarte<'d, T> {
-    tx_done: Signal<()>,
-    rx_done: Signal<u32>,
-}
-
-impl<T> Uarte<T>
-where
-    T: Instance,
-{
     /// Creates the interface to a UARTE instance.
     /// Sets the baud rate, parity and assigns the pins to the UARTE peripheral.
     ///
@@ -52,85 +58,48 @@ where
     /// or [`receive`](Uarte::receive).
     #[allow(unused_unsafe)]
     pub unsafe fn new(
-        uarte: T,
+        uarte: impl PeripheralBorrow<Target = T> + 'd,
-        irq: T::Interrupt,
+        irq: impl PeripheralBorrow<Target = T::Interrupt> + 'd,
-        mut pins: Pins,
+        rxd: impl PeripheralBorrow<Target = impl GpioPin> + 'd,
-        parity: Parity,
+        txd: impl PeripheralBorrow<Target = impl GpioPin> + 'd,
-        baudrate: Baudrate,
+        cts: impl PeripheralBorrow<Target = impl GpioPin> + 'd,
+        rts: impl PeripheralBorrow<Target = impl GpioPin> + 'd,
+        config: Config,
     ) -> Self {
-        assert!(uarte.enable.read().enable().is_disabled());
+        unborrow!(uarte, irq, rxd, txd, cts, rts);
 
-        uarte.psel.rxd.write(|w| {
+        let r = uarte.regs();
-            unsafe { w.bits(pins.rxd.psel_bits()) };
-            w.connect().connected()
-        });
 
-        pins.txd.set_high().unwrap();
+        assert!(r.enable.read().enable().is_disabled());
-        uarte.psel.txd.write(|w| {
-            unsafe { w.bits(pins.txd.psel_bits()) };
-            w.connect().connected()
-        });
 
-        // Optional pins
+        // TODO OptionalPin for RTS/CTS.
-        uarte.psel.cts.write(|w| {
-            if let Some(ref pin) = pins.cts {
-                unsafe { w.bits(pin.psel_bits()) };
-                w.connect().connected()
-            } else {
-                w.connect().disconnected()
-            }
-        });
 
-        uarte.psel.rts.write(|w| {
+        txd.set_high();
-            if let Some(ref pin) = pins.rts {
+        rts.set_high();
-                unsafe { w.bits(pin.psel_bits()) };
+        rxd.conf().write(|w| w.input().connect().drive().h0h1());
-                w.connect().connected()
+        txd.conf().write(|w| w.dir().output().drive().h0h1());
-            } else {
+        //cts.conf().write(|w| w.input().connect().drive().h0h1());
-                w.connect().disconnected()
+        //rts.conf().write(|w| w.dir().output().drive().h0h1());
-            }
-        });
 
-        uarte.baudrate.write(|w| w.baudrate().variant(baudrate));
+        r.psel.rxd.write(|w| unsafe { w.bits(rxd.psel_bits()) });
-        uarte.config.write(|w| w.parity().variant(parity));
+        r.psel.txd.write(|w| unsafe { w.bits(txd.psel_bits()) });
+        //r.psel.cts.write(|w| unsafe { w.bits(cts.psel_bits()) });
+        //r.psel.rts.write(|w| unsafe { w.bits(rts.psel_bits()) });
 
-        // Enable interrupts
+        r.baudrate.write(|w| w.baudrate().variant(config.baudrate));
-        uarte.events_endtx.reset();
+        r.config.write(|w| w.parity().variant(config.parity));
-        uarte.events_endrx.reset();
-        uarte
-            .intenset
-            .write(|w| w.endtx().set().txstopped().set().endrx().set().rxto().set());
 
-        // Register ISR
+        // Enable
-        irq.set_handler(Self::on_irq);
+        r.enable.write(|w| w.enable().enabled());
-        irq.unpend();
-        irq.enable();
 
-        Uarte {
+        Self {
-            instance: uarte,
+            peri: uarte,
             irq,
-            pins,
+            phantom: PhantomData,
         }
     }
 
-    pub fn free(self) -> (T, T::Interrupt, Pins) {
+    /*
-        // Wait for the peripheral to be disabled from the ISR.
-        while self.instance.enable.read().enable().is_enabled() {}
-        (self.instance, self.irq, self.pins)
-    }
-
-    fn enable(&mut self) {
-        trace!("enable");
-        self.instance.enable.write(|w| w.enable().enabled());
-    }
-
-    fn tx_started(&self) -> bool {
-        self.instance.events_txstarted.read().bits() != 0
-    }
-
-    fn rx_started(&self) -> bool {
-        self.instance.events_rxstarted.read().bits() != 0
-    }
-
     unsafe fn on_irq(_ctx: *mut ()) {
         let uarte = &*pac::UARTE0::ptr();
 
@@ -186,54 +155,127 @@ where
             uarte.enable.write(|w| w.enable().disabled());
         }
     }
+     */
 }
 
-impl<T: Instance> embassy::traits::uart::Uart for Uarte<T> {
+impl<'d, T: Instance> Read for Uarte<'d, T> {
-    type ReceiveFuture<'a> = ReceiveFuture<'a, T>;
+    #[rustfmt::skip]
-    type SendFuture<'a> = SendFuture<'a, T>;
+    type ReadFuture<'a> where Self: 'a = impl Future<Output = Result<(), Error>> + 'a;
 
-    /// Sends serial data.
+    fn read<'a>(self: Pin<&'a mut Self>, rx_buffer: &'a mut [u8]) -> Self::ReadFuture<'a> {
-    ///
+        async move {
-    /// `tx_buffer` is marked as static as per `embedded-dma` requirements.
+            let this = unsafe { self.get_unchecked_mut() };
-    /// It it safe to use a buffer with a non static lifetime if memory is not
-    /// reused until the future has finished.
-    fn send<'a>(&'a mut self, tx_buffer: &'a [u8]) -> SendFuture<'a, T> {
-        // Panic if TX is running which can happen if the user has called
-        // `mem::forget()` on a previous future after polling it once.
-        assert!(!self.tx_started());
 
-        T::state().tx_done.reset();
+            let ptr = rx_buffer.as_ptr();
+            let len = rx_buffer.len();
+            assert!(len <= EASY_DMA_SIZE);
 
-        SendFuture {
+            let r = this.peri.regs();
-            uarte: self,
+
-            buf: tx_buffer,
+            let drop = OnDrop::new(move || {
-        }
+                info!("read drop: stopping");
+
+                r.intenclr.write(|w| w.endrx().clear());
+                r.tasks_stoprx.write(|w| unsafe { w.bits(1) });
+
+                // TX is stopped almost instantly, spinning is fine.
+                while r.events_endrx.read().bits() == 0 {}
+                info!("read drop: stopped");
+            });
+
+            r.rxd.ptr.write(|w| unsafe { w.ptr().bits(ptr as u32) });
+            r.rxd.maxcnt.write(|w| unsafe { w.maxcnt().bits(len as _) });
+
+            r.events_endrx.reset();
+            r.intenset.write(|w| w.endrx().set());
+
+            compiler_fence(Ordering::SeqCst);
+
+            trace!("startrx");
+            r.tasks_startrx.write(|w| unsafe { w.bits(1) });
+
+            let irq = &mut this.irq;
+            poll_fn(|cx| {
+                if r.events_endrx.read().bits() != 0 {
+                    r.events_endrx.reset();
+                    return Poll::Ready(());
                 }
 
-    /// Receives serial data.
+                wake_on_interrupt(irq, cx.waker());
-    ///
-    /// The future is pending until the buffer is completely filled.
-    /// A common pattern is to use [`stop()`](ReceiveFuture::stop) to cancel
-    /// unfinished transfers after a timeout to prevent lockup when no more data
-    /// is incoming.
-    ///
-    /// `rx_buffer` is marked as static as per `embedded-dma` requirements.
-    /// It it safe to use a buffer with a non static lifetime if memory is not
-    /// reused until the future has finished.
-    fn receive<'a>(&'a mut self, rx_buffer: &'a mut [u8]) -> ReceiveFuture<'a, T> {
-        // Panic if RX is running which can happen if the user has called
-        // `mem::forget()` on a previous future after polling it once.
-        assert!(!self.rx_started());
 
-        T::state().rx_done.reset();
+                Poll::Pending
+            })
+            .await;
 
-        ReceiveFuture {
+            compiler_fence(Ordering::SeqCst);
-            uarte: self,
+            r.intenclr.write(|w| w.endrx().clear());
-            buf: rx_buffer,
+            drop.defuse();
+
+            Ok(())
         }
     }
 }
 
+impl<'d, T: Instance> Write for Uarte<'d, T> {
+    #[rustfmt::skip]
+    type WriteFuture<'a> where Self: 'a = impl Future<Output = Result<(), Error>> + 'a;
+
+    fn write<'a>(self: Pin<&'a mut Self>, tx_buffer: &'a [u8]) -> Self::WriteFuture<'a> {
+        async move {
+            let this = unsafe { self.get_unchecked_mut() };
+
+            let ptr = tx_buffer.as_ptr();
+            let len = tx_buffer.len();
+            assert!(len <= EASY_DMA_SIZE);
+            // TODO: panic if buffer is not in SRAM
+
+            let r = this.peri.regs();
+
+            let drop = OnDrop::new(move || {
+                info!("write drop: stopping");
+
+                r.intenclr.write(|w| w.endtx().clear());
+                r.tasks_stoptx.write(|w| unsafe { w.bits(1) });
+
+                // TX is stopped almost instantly, spinning is fine.
+                while r.events_endtx.read().bits() == 0 {}
+                info!("write drop: stopped");
+            });
+
+            r.txd.ptr.write(|w| unsafe { w.ptr().bits(ptr as u32) });
+            r.txd.maxcnt.write(|w| unsafe { w.maxcnt().bits(len as _) });
+
+            r.events_endtx.reset();
+            r.intenset.write(|w| w.endtx().set());
+
+            compiler_fence(Ordering::SeqCst);
+
+            trace!("starttx");
+            r.tasks_starttx.write(|w| unsafe { w.bits(1) });
+
+            let irq = &mut this.irq;
+            poll_fn(|cx| {
+                if r.events_endtx.read().bits() != 0 {
+                    r.events_endtx.reset();
+                    return Poll::Ready(());
+                }
+
+                wake_on_interrupt(irq, cx.waker());
+
+                Poll::Pending
+            })
+            .await;
+
+            compiler_fence(Ordering::SeqCst);
+            r.intenclr.write(|w| w.endtx().clear());
+            drop.defuse();
+
+            Ok(())
+        }
+    }
+}
+
+/*
 /// Future for the [`Uarte::send()`] method.
 pub struct SendFuture<'a, T>
 where
@@ -252,11 +294,8 @@ where
             trace!("stoptx");
 
             // Stop the transmitter to minimize the current consumption.
-            self.uarte.instance.events_txstarted.reset();
+            self.uarte.peri.events_txstarted.reset();
-            self.uarte
+            self.uarte.peri.tasks_stoptx.write(|w| unsafe { w.bits(1) });
-                .instance
-                .tasks_stoptx
-                .write(|w| unsafe { w.bits(1) });
 
             // TX is stopped almost instantly, spinning is fine.
             while !T::state().tx_done.signaled() {}
@@ -264,46 +303,6 @@ where
     }
 }
 
-impl<'a, T> Future for SendFuture<'a, T>
-where
-    T: Instance,
-{
-    type Output = Result<(), embassy::traits::uart::Error>;
-
-    fn poll(self: core::pin::Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Self::Output> {
-        let Self { uarte, buf } = unsafe { self.get_unchecked_mut() };
-
-        if T::state().tx_done.poll_wait(cx).is_pending() {
-            let ptr = buf.as_ptr();
-            let len = buf.len();
-            assert!(len <= EASY_DMA_SIZE);
-            // TODO: panic if buffer is not in SRAM
-
-            uarte.enable();
-
-            compiler_fence(Ordering::SeqCst);
-            uarte
-                .instance
-                .txd
-                .ptr
-                .write(|w| unsafe { w.ptr().bits(ptr as u32) });
-            uarte
-                .instance
-                .txd
-                .maxcnt
-                .write(|w| unsafe { w.maxcnt().bits(len as _) });
-
-            trace!("starttx");
-            uarte.instance.tasks_starttx.write(|w| unsafe { w.bits(1) });
-            while !uarte.tx_started() {} // Make sure transmission has started
-
-            Poll::Pending
-        } else {
-            Poll::Ready(Ok(()))
-        }
-    }
-}
-
 /// Future for the [`Uarte::receive()`] method.
 pub struct ReceiveFuture<'a, T>
 where
@@ -321,11 +320,8 @@ where
         if self.uarte.rx_started() {
             trace!("stoprx (drop)");
 
-            self.uarte.instance.events_rxstarted.reset();
+            self.uarte.peri.events_rxstarted.reset();
-            self.uarte
+            self.uarte.peri.tasks_stoprx.write(|w| unsafe { w.bits(1) });
-                .instance
-                .tasks_stoprx
-                .write(|w| unsafe { w.bits(1) });
 
             embassy_extras::low_power_wait_until(|| T::state().rx_done.signaled())
         }
@@ -350,19 +346,11 @@ where
                 uarte.enable();
 
                 compiler_fence(Ordering::SeqCst);
-                uarte
+                r.rxd.ptr.write(|w| unsafe { w.ptr().bits(ptr as u32) });
-                    .instance
+                r.rxd.maxcnt.write(|w| unsafe { w.maxcnt().bits(len as _) });
-                    .rxd
-                    .ptr
-                    .write(|w| unsafe { w.ptr().bits(ptr as u32) });
-                uarte
-                    .instance
-                    .rxd
-                    .maxcnt
-                    .write(|w| unsafe { w.maxcnt().bits(len as _) });
 
                 trace!("startrx");
-                uarte.instance.tasks_startrx.write(|w| unsafe { w.bits(1) });
+                uarte.peri.tasks_startrx.write(|w| unsafe { w.bits(1) });
                 while !uarte.rx_started() {} // Make sure reception has started
 
                 Poll::Pending
@@ -383,11 +371,8 @@ where
         let len = if self.uarte.rx_started() {
             trace!("stoprx (stop)");
 
-            self.uarte.instance.events_rxstarted.reset();
+            self.uarte.peri.events_rxstarted.reset();
-            self.uarte
+            self.uarte.peri.tasks_stoprx.write(|w| unsafe { w.bits(1) });
-                .instance
-                .tasks_stoprx
-                .write(|w| unsafe { w.bits(1) });
             T::state().rx_done.wait().await
         } else {
             // Transfer was stopped before it even started. No bytes were sent.
@@ -396,45 +381,33 @@ where
         len as _
     }
 }
+ */
 
-mod private {
+mod sealed {
-    pub trait Sealed {}
+    use super::*;
+
+    pub trait Instance {
+        fn regs(&self) -> &pac::uarte0::RegisterBlock;
+    }
 }
 
-pub trait Instance:
+pub trait Instance: sealed::Instance + 'static {
-    Deref<Target = pac::uarte0::RegisterBlock> + Sized + private::Sealed + 'static
-{
     type Interrupt: Interrupt;
-
-    #[doc(hidden)]
-    fn state() -> &'static State;
 }
 
-static UARTE0_STATE: State = State {
+macro_rules! make_impl {
-    tx_done: Signal::new(),
+    ($type:ident, $irq:ident) => {
-    rx_done: Signal::new(),
+        impl sealed::Instance for peripherals::$type {
-};
+            fn regs(&self) -> &pac::uarte0::RegisterBlock {
-impl private::Sealed for pac::UARTE0 {}
+                unsafe { &*pac::$type::ptr() }
-impl Instance for pac::UARTE0 {
-    type Interrupt = interrupt::UARTE0_UART0;
-
-    fn state() -> &'static State {
-        &UARTE0_STATE
             }
-}
-
-#[cfg(any(feature = "52833", feature = "52840", feature = "9160"))]
-static UARTE1_STATE: State = State {
-    tx_done: Signal::new(),
-    rx_done: Signal::new(),
-};
-#[cfg(any(feature = "52833", feature = "52840", feature = "9160"))]
-impl private::Sealed for pac::UARTE1 {}
-#[cfg(any(feature = "52833", feature = "52840", feature = "9160"))]
-impl Instance for pac::UARTE1 {
-    type Interrupt = interrupt::UARTE1;
-
-    fn state() -> &'static State {
-        &UARTE1_STATE
         }
+        impl Instance for peripherals::$type {
+            type Interrupt = interrupt::$irq;
+        }
+    };
 }
+
+make_impl!(UARTE0, UARTE0_UART0);
+#[cfg(any(feature = "52833", feature = "52840", feature = "9160"))]
+make_impl!(UARTE1, UARTE1);

embassy-traits/src/uart.rs

@@ -1,4 +1,5 @@
 use core::future::Future;
+use core::pin::Pin;
 
 #[derive(Copy, Clone, Debug, Eq, PartialEq)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
@@ -7,18 +8,31 @@ pub enum Error {
     Other,
 }
 
-pub trait Uart {
+pub trait Read {
-    type ReceiveFuture<'a>: Future<Output = Result<(), Error>>;
+    type ReadFuture<'a>: Future<Output = Result<(), Error>>
-    type SendFuture<'a>: Future<Output = Result<(), Error>>;
+    where
-    /// Receive into the buffer until the buffer is full
+        Self: 'a;
-    fn receive<'a>(&'a mut self, buf: &'a mut [u8]) -> Self::ReceiveFuture<'a>;
+
-    /// Send the specified buffer, and return when the transmission has completed
+    fn read<'a>(self: Pin<&'a mut Self>, buf: &'a mut [u8]) -> Self::ReadFuture<'a>;
-    fn send<'a>(&'a mut self, buf: &'a [u8]) -> Self::SendFuture<'a>;
 }
 
-pub trait IdleUart {
+pub trait ReadUntilIdle {
-    type ReceiveFuture<'a>: Future<Output = Result<usize, Error>>;
+    type ReadUntilIdleFuture<'a>: Future<Output = Result<usize, Error>>
+    where
+        Self: 'a;
+
     /// Receive into the buffer until the buffer is full or the line is idle after some bytes are received
     /// Return the number of bytes received
-    fn receive_until_idle<'a>(&'a mut self, buf: &'a mut [u8]) -> Self::ReceiveFuture<'a>;
+    fn read_until_idle<'a>(
+        self: Pin<&'a mut Self>,
+        buf: &'a mut [u8],
+    ) -> Self::ReadUntilIdleFuture<'a>;
+}
+
+pub trait Write {
+    type WriteFuture<'a>: Future<Output = Result<(), Error>>
+    where
+        Self: 'a;
+
+    fn write<'a>(self: Pin<&'a mut Self>, buf: &'a [u8]) -> Self::WriteFuture<'a>;
 }

embassy/src/util/mod.rs

@@ -2,6 +2,7 @@
 mod drop_bomb;
 mod forever;
 mod mutex;
+mod on_drop;
 mod portal;
 mod signal;
 
@@ -11,6 +12,7 @@ mod waker;
 pub use drop_bomb::*;
 pub use forever::*;
 pub use mutex::*;
+pub use on_drop::*;
 pub use portal::*;
 pub use signal::*;
 pub use waker::*;

embassy/src/util/on_drop.rs

@@ -0,0 +1,24 @@
+use core::mem;
+use core::mem::MaybeUninit;
+
+pub struct OnDrop<F: FnOnce()> {
+    f: MaybeUninit<F>,
+}
+
+impl<F: FnOnce()> OnDrop<F> {
+    pub fn new(f: F) -> Self {
+        Self {
+            f: MaybeUninit::new(f),
+        }
+    }
+
+    pub fn defuse(self) {
+        mem::forget(self)
+    }
+}
+
+impl<F: FnOnce()> Drop for OnDrop<F> {
+    fn drop(&mut self) {
+        unsafe { self.f.as_ptr().read()() }
+    }
+}