Update probe-rs-cli -> probe-rs

.vscode/settings.json

@@ -6,16 +6,16 @@
   "rust-analyzer.check.allTargets": false,
   "rust-analyzer.check.noDefaultFeatures": true,
   "rust-analyzer.cargo.noDefaultFeatures": true,
-  "rust-analyzer.cargo.target": "thumbv7em-none-eabi",
+  "rust-analyzer.cargo.target": "thumbv7m-none-eabi",
   //"rust-analyzer.cargo.target": "thumbv8m.main-none-eabihf",
   "rust-analyzer.cargo.features": [
-    "nightly",
+    ///"nightly",
   ],
   "rust-analyzer.linkedProjects": [
     // Declare for the target you wish to develop
     // "embassy-executor/Cargo.toml",
     // "embassy-sync/Cargo.toml",
-    "examples/nrf52840/Cargo.toml",
+    "examples/stm32wl/Cargo.toml",
     // "examples/nrf5340/Cargo.toml",
     // "examples/nrf-rtos-trace/Cargo.toml",
     // "examples/rp/Cargo.toml",

cyw43/README.md

@@ -1,6 +1,6 @@
 # cyw43
 
-WIP driver for the CYW43439 wifi chip, used in the Raspberry Pi Pico W. Implementation based on [Infineon/wifi-host-driver](https://github.com/Infineon/wifi-host-driver).
+Rust driver for the CYW43439 wifi chip, used in the Raspberry Pi Pico W. Implementation based on [Infineon/wifi-host-driver](https://github.com/Infineon/wifi-host-driver).
 
 ## Current status
 
@@ -19,18 +19,18 @@ Working:
 TODO:
 
 - Setting a custom MAC address.
-- Bus sleep (unclear what the benefit is. Is it needed for IRQs? or is it just power consumption optimization?)
+- Bus sleep (for power consumption optimization)
 
 ## Running the examples
 
-- `cargo install probe-rs-cli`
+- `cargo install probe-rs --features cli`
-- `cd examples/rpi-pico-w`
+- `cd examples/rp`
 ### Example 1: Scan the wifi stations
 - `cargo run --release --bin wifi_scan`
 ### Example 2: Create an access point (IP and credentials in the code)
-- `cargo run --release --bin tcp_server_ap`
+- `cargo run --release --bin wifi_ap_tcp_server`
 ### Example 3: Connect to an existing network and create a server
-- `WIFI_NETWORK=MyWifiNetwork WIFI_PASSWORD=MyWifiPassword cargo run --release`
+- `WIFI_NETWORK=MyWifiNetwork WIFI_PASSWORD=MyWifiPassword cargo run --release --bin wifi_tcp_server`
 
 After a few seconds, you should see that DHCP picks up an IP address like this
 ```

embassy-nrf/src/lib.rs

@@ -410,13 +410,13 @@ pub fn init(config: config::Config) -> Peripherals {
             warn!(
                 "You have requested enabling chip reset functionality on the reset pin, by not enabling the Cargo feature `reset-pin-as-gpio`.\n\
                 However, UICR is already programmed to some other setting, and can't be changed without erasing it.\n\
-                To fix this, erase UICR manually, for example using `probe-rs-cli erase` or `nrfjprog --eraseuicr`."
+                To fix this, erase UICR manually, for example using `probe-rs erase` or `nrfjprog --eraseuicr`."
             );
             #[cfg(feature = "reset-pin-as-gpio")]
             warn!(
                 "You have requested using the reset pin as GPIO, by enabling the Cargo feature `reset-pin-as-gpio`.\n\
                 However, UICR is already programmed to some other setting, and can't be changed without erasing it.\n\
-                To fix this, erase UICR manually, for example using `probe-rs-cli erase` or `nrfjprog --eraseuicr`."
+                To fix this, erase UICR manually, for example using `probe-rs erase` or `nrfjprog --eraseuicr`."
             );
         }
     }
@@ -432,7 +432,7 @@ pub fn init(config: config::Config) -> Peripherals {
             warn!(
                 "You have requested to use P0.09 and P0.10 pins for NFC, by not enabling the Cargo feature `nfc-pins-as-gpio`.\n\
                 However, UICR is already programmed to some other setting, and can't be changed without erasing it.\n\
-                To fix this, erase UICR manually, for example using `probe-rs-cli erase` or `nrfjprog --eraseuicr`."
+                To fix this, erase UICR manually, for example using `probe-rs erase` or `nrfjprog --eraseuicr`."
             );
         }
     }

examples/boot/application/nrf/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace nRF82840_xxAA with your chip as listed in `probe-rs-cli chip list`
+# replace nRF82840_xxAA with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip nRF52840_xxAA"
+runner = "probe-rs run --chip nRF52840_xxAA"
 
 [build]
 target = "thumbv7em-none-eabi"

examples/boot/application/rp/.cargo/config.toml

@@ -3,7 +3,7 @@ build-std = ["core"]
 build-std-features = ["panic_immediate_abort"]
 
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-runner = "probe-rs-cli run --chip RP2040"
+runner = "probe-rs run --chip RP2040"
 
 [build]
 target = "thumbv6m-none-eabi"

examples/boot/application/stm32f3/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
+# replace STM32F429ZITx with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32F303VCTx"
+runner = "probe-rs run --chip STM32F303VCTx"
 
 [build]
 target = "thumbv7em-none-eabihf"

examples/boot/application/stm32f7/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
+# replace STM32F429ZITx with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32F767ZITx"
+runner = "probe-rs run --chip STM32F767ZITx"
 
 [build]
 target = "thumbv7em-none-eabihf"

examples/boot/application/stm32h7/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
+# replace STM32F429ZITx with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32H743ZITx"
+runner = "probe-rs run --chip STM32H743ZITx"
 
 [build]
 target = "thumbv7em-none-eabihf"

examples/boot/application/stm32h7/flash-boot.sh

@@ -1,5 +1,5 @@
 #!/bin/bash
-probe-rs-cli erase --chip STM32H743ZITx
+probe-rs erase --chip STM32H743ZITx
 mv ../../bootloader/stm32/memory.x ../../bootloader/stm32/memory-old.x
 cp memory-bl.x ../../bootloader/stm32/memory.x
 

examples/boot/application/stm32l0/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace your chip as listed in `probe-rs-cli chip list`
+# replace your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32L072CZTx"
+runner = "probe-rs run --chip STM32L072CZTx"
 
 [build]
 target = "thumbv6m-none-eabi"

examples/boot/application/stm32l1/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace your chip as listed in `probe-rs-cli chip list`
+# replace your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32L151CBxxA"
+runner = "probe-rs run --chip STM32L151CBxxA"
 
 [build]
 target = "thumbv7m-none-eabi"

examples/boot/application/stm32l4/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace your chip as listed in `probe-rs-cli chip list`
+# replace your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32L475VG"
+runner = "probe-rs run --chip STM32L475VG"
 
 [build]
 target = "thumbv7em-none-eabihf"

examples/boot/application/stm32wl/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace your chip as listed in `probe-rs-cli chip list`
+# replace your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32WLE5JCIx"
+runner = "probe-rs run --chip STM32WLE5JCIx"
 
 [build]
 target = "thumbv7em-none-eabihf"

examples/boot/bootloader/nrf/.cargo/config.toml

@@ -4,7 +4,7 @@ build-std-features = ["panic_immediate_abort"]
 
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
 #runner = "./fruitrunner"
-runner = "probe-rs-cli run --chip nrf52840_xxAA"
+runner = "probe-rs run --chip nrf52840_xxAA"
 
 rustflags = [
   # Code-size optimizations.

examples/boot/bootloader/rp/.cargo/config.toml

@@ -1,5 +1,5 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-runner = "probe-rs-cli run --chip RP2040"
+runner = "probe-rs run --chip RP2040"
 
 [build]
 target = "thumbv6m-none-eabi"

examples/nrf-rtos-trace/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace nRF82840_xxAA with your chip as listed in `probe-rs-cli chip list`
+# replace nRF82840_xxAA with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip nRF52840_xxAA"
+runner = "probe-rs run --chip nRF52840_xxAA"
 
 [build]
 target = "thumbv7em-none-eabi"

examples/nrf52840-rtic/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace nRF82840_xxAA with your chip as listed in `probe-rs-cli chip list`
+# replace nRF82840_xxAA with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip nRF52840_xxAA"
+runner = "probe-rs run --chip nRF52840_xxAA"
 
 [build]
 target = "thumbv7em-none-eabi"

examples/nrf52840/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace nRF82840_xxAA with your chip as listed in `probe-rs-cli chip list`
+# replace nRF82840_xxAA with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip nRF52840_xxAA"
+runner = "probe-rs run --chip nRF52840_xxAA"
 
 [build]
 target = "thumbv7em-none-eabi"

examples/nrf52840/src/bin/nvmc.rs

@@ -14,7 +14,7 @@ async fn main(_spawner: Spawner) {
     let p = embassy_nrf::init(Default::default());
     info!("Hello NVMC!");
 
-    // probe-rs-cli run breaks without this, I'm not sure why.
+    // probe-rs run breaks without this, I'm not sure why.
     Timer::after(Duration::from_secs(1)).await;
 
     let mut f = Nvmc::new(p.NVMC);

examples/nrf52840/src/bin/wdt.rs

@@ -16,7 +16,7 @@ async fn main(_spawner: Spawner) {
     let mut config = Config::default();
     config.timeout_ticks = 32768 * 3; // 3 seconds
 
-    // This is needed for `probe-rs-cli run` to be able to catch the panic message
+    // This is needed for `probe-rs run` to be able to catch the panic message
     // in the WDT interrupt. The core resets 2 ticks after firing the interrupt.
     config.run_during_debug_halt = false;
 

examples/nrf5340/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace nRF5340_xxAA with your chip as listed in `probe-rs-cli chip list`
+# replace nRF5340_xxAA with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip nRF5340_xxAA"
+runner = "probe-rs run --chip nRF5340_xxAA"
 
 [build]
 target = "thumbv8m.main-none-eabihf"

examples/rp/.cargo/config.toml

@@ -1,5 +1,5 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-runner = "probe-rs-cli run --chip RP2040"
+runner = "probe-rs run --chip RP2040"
 
 [build]
 target = "thumbv6m-none-eabi"        # Cortex-M0 and Cortex-M0+

examples/rp/src/bin/wifi_ap_tcp_server.rs

@@ -42,8 +42,8 @@ async fn main(spawner: Spawner) {
 
     // To make flashing faster for development, you may want to flash the firmwares independently
     // at hardcoded addresses, instead of baking them into the program with `include_bytes!`:
-    //     probe-rs-cli download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
+    //     probe-rs download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
-    //     probe-rs-cli download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
+    //     probe-rs download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
     //let fw = unsafe { core::slice::from_raw_parts(0x10100000 as *const u8, 224190) };
     //let clm = unsafe { core::slice::from_raw_parts(0x10140000 as *const u8, 4752) };
 

examples/rp/src/bin/wifi_blinky.rs

@@ -27,8 +27,8 @@ async fn main(spawner: Spawner) {
 
     // To make flashing faster for development, you may want to flash the firmwares independently
     // at hardcoded addresses, instead of baking them into the program with `include_bytes!`:
-    //     probe-rs-cli download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
+    //     probe-rs download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
-    //     probe-rs-cli download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
+    //     probe-rs download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
     //let fw = unsafe { core::slice::from_raw_parts(0x10100000 as *const u8, 224190) };
     //let clm = unsafe { core::slice::from_raw_parts(0x10140000 as *const u8, 4752) };
 

examples/rp/src/bin/wifi_scan.rs

@@ -39,8 +39,8 @@ async fn main(spawner: Spawner) {
 
     // To make flashing faster for development, you may want to flash the firmwares independently
     // at hardcoded addresses, instead of baking them into the program with `include_bytes!`:
-    //     probe-rs-cli download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
+    //     probe-rs download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
-    //     probe-rs-cli download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
+    //     probe-rs download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
     //let fw = unsafe { core::slice::from_raw_parts(0x10100000 as *const u8, 224190) };
     //let clm = unsafe { core::slice::from_raw_parts(0x10140000 as *const u8, 4752) };
 

examples/rp/src/bin/wifi_tcp_server.rs

@@ -42,8 +42,8 @@ async fn main(spawner: Spawner) {
 
     // To make flashing faster for development, you may want to flash the firmwares independently
     // at hardcoded addresses, instead of baking them into the program with `include_bytes!`:
-    //     probe-rs-cli download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
+    //     probe-rs download 43439A0.bin --format bin --chip RP2040 --base-address 0x10100000
-    //     probe-rs-cli download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
+    //     probe-rs download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x10140000
     //let fw = unsafe { core::slice::from_raw_parts(0x10100000 as *const u8, 224190) };
     //let clm = unsafe { core::slice::from_raw_parts(0x10140000 as *const u8, 4752) };
 

examples/stm32c0/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32G071C8Rx with your chip as listed in `probe-rs-cli chip list`
+# replace STM32G071C8Rx with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --speed 100 --chip STM32c031c6tx"
+runner = "probe-rs run --speed 100 --chip STM32c031c6tx"
 
 [build]
 target = "thumbv6m-none-eabi"

examples/stm32f0/.cargo/config.toml

@@ -1,5 +1,5 @@
 [target.thumbv6m-none-eabi]
-runner = 'probe-rs-cli run --chip STM32F091RCTX'
+runner = 'probe-rs run --chip STM32F091RCTX'
 
 [build]
 target = "thumbv6m-none-eabi"

examples/stm32f1/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F103C8 with your chip as listed in `probe-rs-cli chip list`
+# replace STM32F103C8 with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32F103C8"
+runner = "probe-rs run --chip STM32F103C8"
 
 [build]
 target = "thumbv7m-none-eabi"

examples/stm32f2/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F207ZGTx with your chip as listed in `probe-rs-cli chip list`
+# replace STM32F207ZGTx with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32F207ZGTx"
+runner = "probe-rs run --chip STM32F207ZGTx"
 
 [build]
 target = "thumbv7m-none-eabi"

examples/stm32f3/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
+# replace STM32F429ZITx with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32F303ZETx"
+runner = "probe-rs run --chip STM32F303ZETx"
 
 [build]
 target = "thumbv7em-none-eabihf"

examples/stm32f4/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
+# replace STM32F429ZITx with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32F429ZITx"
+runner = "probe-rs run --chip STM32F429ZITx"
 
 [build]
 target = "thumbv7em-none-eabi"

examples/stm32f7/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
+# replace STM32F429ZITx with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32F767ZITx"
+runner = "probe-rs run --chip STM32F767ZITx"
 
 [build]
 target = "thumbv7em-none-eabihf"

examples/stm32g0/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32G071C8Rx with your chip as listed in `probe-rs-cli chip list`
+# replace STM32G071C8Rx with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32G071RBTx"
+runner = "probe-rs run --chip STM32G071RBTx"
 
 [build]
 target = "thumbv6m-none-eabi"

examples/stm32g4/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32G071C8Rx with your chip as listed in `probe-rs-cli chip list`
+# replace STM32G071C8Rx with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32G484VETx"
+runner = "probe-rs run --chip STM32G484VETx"
 
 [build]
 target = "thumbv7em-none-eabi"

examples/stm32h5/.cargo/config.toml

@@ -1,5 +1,5 @@
 [target.thumbv8m.main-none-eabihf]
-runner = 'probe-rs-cli run --chip STM32H563ZITx'
+runner = 'probe-rs run --chip STM32H563ZITx'
 
 [build]
 target = "thumbv8m.main-none-eabihf"

examples/stm32h7/.cargo/config.toml

@@ -1,5 +1,5 @@
 [target.thumbv7em-none-eabihf]
-runner = 'probe-rs-cli run --chip STM32H743ZITx'
+runner = 'probe-rs run --chip STM32H743ZITx'
 
 [build]
 target = "thumbv7em-none-eabihf" # Cortex-M4F and Cortex-M7F (with FPU)

examples/stm32l0/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace your chip as listed in `probe-rs-cli chip list`
+# replace your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32L053R8Tx"
+runner = "probe-rs run --chip STM32L053R8Tx"
 
 [build]
 target = "thumbv6m-none-eabi"

examples/stm32l1/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace your chip as listed in `probe-rs-cli chip list`
+# replace your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32L151CBxxA"
+runner = "probe-rs run --chip STM32L151CBxxA"
 
 [build]
 target = "thumbv7m-none-eabi"

examples/stm32l4/.cargo/config.toml

@@ -1,8 +1,8 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32F429ZITx with your chip as listed in `probe-rs-cli chip list`
+# replace STM32F429ZITx with your chip as listed in `probe-rs chip list`
-#runner = "probe-rs-cli run --chip STM32L475VGT6"
+#runner = "probe-rs run --chip STM32L475VGT6"
-#runner = "probe-rs-cli run --chip STM32L475VG"
+#runner = "probe-rs run --chip STM32L475VG"
-runner = "probe-rs-cli run --chip STM32L4S5VI"
+runner = "probe-rs run --chip STM32L4S5VI"
 
 [build]
 target = "thumbv7em-none-eabi"

examples/stm32l5/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32L552ZETxQ with your chip as listed in `probe-rs-cli chip list`
+# replace STM32L552ZETxQ with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32L552ZETxQ"
+runner = "probe-rs run --chip STM32L552ZETxQ"
 
 [build]
 target = "thumbv8m.main-none-eabihf"

examples/stm32u5/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32U585AIIx with your chip as listed in `probe-rs-cli chip list`
+# replace STM32U585AIIx with your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32U585AIIx"
+runner = "probe-rs run --chip STM32U585AIIx"
 
 [build]
 target = "thumbv8m.main-none-eabihf"

examples/stm32wb/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace STM32WB55CCUx with your chip as listed in `probe-rs-cli chip list`
+# replace STM32WB55CCUx with your chip as listed in `probe-rs chip list`
-# runner = "probe-rs-cli run --chip STM32WB55RGVx --speed 1000 --connect-under-reset"
+# runner = "probe-rs run --chip STM32WB55RGVx --speed 1000 --connect-under-reset"
 runner = "teleprobe local run --chip STM32WB55RG --elf"
 
 [build]

examples/stm32wl/.cargo/config.toml

@@ -1,6 +1,6 @@
 [target.'cfg(all(target_arch = "arm", target_os = "none"))']
-# replace your chip as listed in `probe-rs-cli chip list`
+# replace your chip as listed in `probe-rs chip list`
-runner = "probe-rs-cli run --chip STM32WLE5JCIx"
+runner = "probe-rs run --chip STM32WLE5JCIx"
 
 [build]
 target = "thumbv7em-none-eabihf"

tests/rp/src/bin/cyw43-perf.rs

@@ -44,8 +44,8 @@ async fn main(spawner: Spawner) {
     }
 
     // cyw43 firmware needs to be flashed manually:
-    //     probe-rs-cli download 43439A0.bin     --format bin --chip RP2040 --base-address 0x101c0000
+    //     probe-rs download 43439A0.bin     --format bin --chip RP2040 --base-address 0x101c0000
-    //     probe-rs-cli download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x101f8000
+    //     probe-rs download 43439A0_clm.bin --format bin --chip RP2040 --base-address 0x101f8000
     let fw = unsafe { core::slice::from_raw_parts(0x101c0000 as *const u8, 224190) };
     let clm = unsafe { core::slice::from_raw_parts(0x101f8000 as *const u8, 4752) };