Commit Graph

1274 Commits

Author SHA1 Message Date
Matous Hybl
6d56f772e1 Add F7 flash and bootloader support 2022-05-06 21:57:15 +02:00
Matous Hybl
4f5088d79d Add support for F3 flash 2022-05-06 21:57:15 +02:00
Dario Nieuwenhuis
fc32b3750c Remove embassy_hal_common::usb.
The replacement is `embassy-usb`. There's a WIP driver for stm32 USBD in #709,
there's no WIP driver for stm32 USB_OTG. This means we're left without
USB_OTG support for now.

Reason for removing is I'm going to soon remove `embassy::io`, and
USB uses it. I don't want to spend time maintaining "dead" code
that is going to be removed. Volunteers welcome, either to update
old USB to the new IO, or write a USB_OTG driver fo the new USB.
2022-05-04 01:41:37 +02:00
Dario Nieuwenhuis
a5f5c3a844 net: add functions to get current Eth and IP config 2022-05-02 16:19:34 +02:00
bors[bot]
d600f39260
Merge #743
743: Add PLL config support for F2 r=Dirbaio a=Gekkio

- minor changes to make the F2 RCC API a bit more flexible
- low-level PLL config with assertions based on datasheet specs. It shouldn't be very difficult to later add a "reverse API" where you pass the clocks you want to a function and it generates a `PLLConfig` struct for you
- PLL API tested on my custom board with 12 MHz HSE as source for PLL to generate max clocks for SYSCLK/AHB/APB/APB1/PLL48
- the example *should* work but is untested since I don't have the Nucleo board 😞 

Co-authored-by: Joonas Javanainen <joonas.javanainen@gmail.com>
2022-04-30 21:08:43 +00:00
Joonas Javanainen
e88559c5ca
Use defmt-friendly error handling 2022-04-30 11:41:17 +03:00
David Lenfesty
2e7b42fc5b embassy-stm32/eth: convert LAN8742 driver to generic SMI driver
SMI Ethernet PHYs all share a common base set of registers that can do
90% of all tasks. The LAN8742 driver used some vendor-specific
registers to check link negotiation status, but the need for that was
debatable, so I migrated it to a generic driver instead, anybody who
wants extra functionality can copy it and impl their own on top of it.
2022-04-30 04:49:24 +02:00
Joonas Javanainen
1d5f9b86fb
Add PLL example for F2 2022-04-29 18:21:41 +03:00
Ulf Lilleengen
b7e7211a20 Fix linker script for nrf bootloader example 2022-04-28 14:11:01 +02:00
Ulf Lilleengen
bd237a1f96 Allow using separate page sizes for state and dfu
* Less generics on bootloader. Keep PAGE_SIZE as a common multiple of
DFU and ACTIVE page sizes.
* Document restriction
* Add unit tests for different page sizes
2022-04-28 10:38:25 +02:00
Ulf Lilleengen
da61611f8f Add bootloader to CI 2022-04-27 15:17:18 +02:00
Ulf Lilleengen
484e0acc63 Add stm32 flash + bootloader support
* Add flash drivers for L0, L1, L4, WB and WL. Not tested for WB, but
should be similar to WL.
* Add embassy-boot-stm32 for bootloading on STM32.
* Add flash examples and bootloader examples
* Update stm32-data
2022-04-27 15:17:18 +02:00
bors[bot]
df814f9bbd
Merge #734 #735
734: executor: Add `Spawner::for_current_executor`. r=Dirbaio a=Dirbaio

This is needed to spawn non-Send tasks in an InterruptExecutor, after the fixes in #730 .

`@matoushybl` could you check if this works for your use case?

735: stm32: add stm32u5 GPDMA, SPIv4 support, add HIL tests. r=Dirbaio a=Dirbaio



Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
2022-04-26 23:32:30 +00:00
Dario Nieuwenhuis
009bb8e4e1 stm32: add stm32u5 GPDMA, SPIv4 support, add HIL tests. 2022-04-27 01:16:14 +02:00
Dario Nieuwenhuis
9e897cbea9 executor: Add Spawner::for_current_executor. 2022-04-26 19:08:18 +02:00
Ulf Lilleengen
2c0e28aa0c Update to released lorawan crates 2022-04-26 19:06:15 +02:00
Dario Nieuwenhuis
2b0e8a330b examples/nrf: add self_spawn example.
This serves as a compile-test of possible typecheck loops due to
TAIT shenanigans.
2022-04-25 22:19:40 +02:00
Dario Nieuwenhuis
b27feb0619 executor: fix unsoundness in InterruptExecutor::start.
The initial closure is not actually called in the interrupt, so this is
illegally sending non-Send futures to the interrupt.

Remove the closure, and return a SendSpawner instead.
2022-04-25 22:09:04 +02:00
Matous Hybl
945fa0871f Implement giant (chunked) DMA transfers for DCMI. 2022-04-25 14:30:43 +02:00
Dario Nieuwenhuis
d409026b95 examples/nrf: add product strings to all usb examples. 2022-04-24 22:46:45 +02:00
Dario Nieuwenhuis
d57fd87ba7 Add embassy-usb-ncm. Implements USBB CDC NCM (Ethernet over USB) 2022-04-24 22:44:52 +02:00
Dario Nieuwenhuis
3251a21fb7 Switch to crates.io embedded-hal, embedded-hal-async.
This temporarily removes support for the async UART trait, since it's
not yet in embedded-hal-async.
2022-04-22 19:58:24 +02:00
Ulf Lilleengen
2afff617f6 Support multiple flash instances in embassy-boot
* Add FlashProvider and FlashConfig traits to define flash
characteristics
* Use traits in bootloader to retrieve flash handles and for
copying data between flash instances
* Add convenience implementations for using a single flash instance.
2022-04-19 20:07:06 +02:00
Ulf Lilleengen
e966125d62 Add embedded-storage trait impls for QSPI
* Adds implementations of embedded-storage and embedded-storage-async
for QSPI
* Add blocking implementations of QSPI
* Use blocking implementation in new() and embedded-storage impls
* Use async implementation in embedded-storage-async impls
* Add FLASH_SIZE const generic parameter
* Own IRQ in Qspi to disable it on drop
2022-04-19 19:06:36 +02:00
Dario Nieuwenhuis
1bf7b4d6c3 usb: rename UsbDeviceBuilder -> Builder. 2022-04-16 04:14:20 +02:00
Dario Nieuwenhuis
f35bde684a usb-hid: add Config struct, to avoid too many params. 2022-04-16 02:07:03 +02:00
Dario Nieuwenhuis
c0de54a341 usb-hid: Simplify API.
- Renamed structs to HidReaderWriter, HidReader, HidWriter.
- Removed unused const generics on `State`.
- Simplified generics on `HidReaderWriter`.
  The class type previously was `HidClass<D, Driver<'d, USBD>, ReportReader<'d, Driver<'d, USBD>, OUT_N>, IN_N>`
  It's now `HidClass<D, Driver<'d, USBD>, IN_N, OUT_N>`. Note that the driver type `Driver<'d, USBD>` is no longer repeated.
- Constructors are now: `HidWriter::new()` for IN-only, `HidReaderWriter::new()` for IN+OUT. No complicated bounds.
- HidReaderWriter has all the methods from HidReader, HidWriter.
2022-04-16 01:59:40 +02:00
bors[bot]
3a90a8eb4a
Merge #711
711: Add DeviceStateHandler, DeviceCommand channel, and remote wakeup support r=Dirbaio a=alexmoon

Apologies for the size of this PR. Once I started getting into the Vbus power management side of my device I found a couple of areas of functionality missing from embassy-usb. Specifically, I need the application to be able to respond to changes in the USB device state in order to properly control the amount of power I'm drawing from Vbus. I also wanted to enable remote wakeup support for my device.

In order to enable device state monitoring, I've created a `DeviceStateHandler` trait and made it possible to pass in an optional reference a handler implementing that trait when creating the `UsbDeviceBuilder`.

Remote wakeup required a way to send commands to the bus which is exclusively owned by the `UsbDevice::run` method. This is the same problem we were discussing for enabling/disabling the device on Vbus power events. My solution is to allow an optional `Channel` to be provided to the `UsbDeviceBuilder` (via `UsbDeviceBuilder::new_with_channel`), allowing the application to send commands into the `run` method. Right now it supports enable, disable and remote wakeup commands.

Since there's now a way to dynamically enable and disable the device, I also added `Config::start_enabled` to control whether or not the `UsbDevice` should start in the enabled state. That also allowed me to make `UsbDeviceBuilder::build` sync again and move enabling the bus into `UsbDevice::run`.

This led to a few driver changes:
1. `Driver::enable` became `Driver::into_bus`
2. `Bus::enable`, `Bus::disable`, and `Bus::remote_wakeup` were added
3. I removed `Bus::reset`, `Bus::suspend`, and `Bus::resume` because they were only ever called based on the result of `Bus::poll`. It made more sense to me to have `Bus::poll` handle the driver-specific state management itself.

I've updated the `usb_hid_keyboard` example to take advantage of all these additional features.

Let me know what you think.

Thanks!


Co-authored-by: alexmoon <alex.r.moon@gmail.com>
2022-04-14 15:16:55 +00:00
alexmoon
b0725c14d3 Split UsbDevice::run into run and run_until_suspend 2022-04-13 16:04:31 -04:00
alexmoon
ff7c6b350e Remove channel and make run future cancelable 2022-04-13 14:55:02 -04:00
alexmoon
7fde3abd5d Remote wakeup bug fixes 2022-04-13 14:55:02 -04:00
alexmoon
f5656e3544 Add DeviceStateHandler, DeviceCommand channel, and remote wakeup support 2022-04-13 14:55:02 -04:00
Dario Nieuwenhuis
e5a843dc06 net: auto-enable defmt in smoltcp using namespaced features. 2022-04-13 17:46:27 +02:00
bors[bot]
6d0e6d563d
Merge #714
714: add more clock options for l4 and l5 r=Dirbaio a=ant32

- added an assert so it panics if pll48div is not 48Mhz
- added MSI as a clock source for PLL
- removed hsi48 option for MCUs mentioned in l4 rcc presentation
- copied some code from l4 to l5, but don't have a way of testing it.

Co-authored-by: Philip A Reimer <antreimer@gmail.com>
2022-04-12 21:42:36 +00:00
Matous Hybl
371f3ef419 Add ADC support for H7 2022-04-12 22:25:00 +02:00
Philip A Reimer
8f6fccf012 fix clock in l4 rng example 2022-04-11 21:06:22 -06:00
Philip A Reimer
d8860c0b80 add stm32l4 hsi48 and usb example 2022-04-09 14:55:03 -06:00
alexmoon
e867364d42 Unify ReadError and WriteError into EndpointError 2022-04-09 01:48:17 +02:00
Ulf Lilleengen
86e52e67d0 Update to latest rust-lorawan version 2022-04-08 12:58:57 +02:00
Dario Nieuwenhuis
0c07d03754 Add missing stm32wl/stm32wb chips except stm32wle 2022-04-08 03:15:27 +02:00
bors[bot]
37da84129d
Merge #657
657: Async usb stack r=Dirbaio a=Dirbaio

TODO

- [x] Make it work on nRF
- [x] Add a way for classes to handle their own EP0 control requests - thanks `@alexmoon!`
- [x] Handle CONTROL OUT requests with data.
- [ ] Impl AsyncRead/AsyncWrite for CDC ACM -- will do later, it's not trivial
- [x] Cleanup unwraps/asserts/panics
- [x] Cleanup logs (make everything trace/debug, not info)
- [ ] Port synopsys-usb-otg
- [ ] Port stm32-usbd
- [ ] Add more classes? HID, MSD?


Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
Co-authored-by: alexmoon <alex.r.moon@gmail.com>
2022-04-07 23:03:39 +00:00
alexmoon
6abbfa9a92 Async-ify Driver::enable and UsbDeviceBuilder::build 2022-04-07 10:51:26 -04:00
Matous Hybl
eb6910fa86 Reexport unborrow macro in HALs 2022-04-07 12:57:02 +02:00
bors[bot]
fee0aef076
Merge #696
696: Add async Mutex. r=Dirbaio a=Dirbaio

What it says on the tin :) 

It allows sharing data between tasks when you want to `.await` stuff while holding it locked.

Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
2022-04-06 10:20:43 +00:00
alexmoon
a1754ac8a8 embassy-usb-hid bug fixes 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
b2e517bb28 usb/serial: add multitask example. 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
3dbb7c9e15 usb/hid: add keyboard example. 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
6d514a0b31 usb/hid: update for endpoint state changes. 2022-04-06 05:38:11 +02:00
alexmoon
2ce435dc34 Add basic device state handling for endpoints. 2022-04-06 05:38:11 +02:00
alexmoon
99f95a33c3 Simplify hid output report handling 2022-04-06 05:38:11 +02:00
alexmoon
c309531874 Remove output() and split() methods from HidClass when there is no out endpoint, and route set_report requests for output reports to RequestHandler::set_report in that case. 2022-04-06 05:38:11 +02:00
alexmoon
a51de5a39a Remove the feature report reader 2022-04-06 05:38:11 +02:00
alexmoon
5ee7a85b33 Async USB HID class 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
1672fdc666 usb-serial: make inner guts private. 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
cdb7bae51a examples/nrf: don't build usb stuff in stable. 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
d1e4b3d7d5 usb: add -usb-serial crate, fix warnings and stable build. 2022-04-06 05:38:11 +02:00
alexmoon
13370c28db Add a control_buf to UsbDevice 2022-04-06 05:38:11 +02:00
alexmoon
c53bb7394a Switch to ControlHandler owned bufs for control_in() 2022-04-06 05:38:11 +02:00
alexmoon
a22639ad92 Remove UnsafeCell from cdc_acm::Control 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
e99a3a1da4 usb: simplify buffer handling for Control IN transfers. 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
bfce731982 usb: nicer names for control structs. 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
2b547f311e usb: move all control-related stuff to mod control. 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
15cc97d794 usb: associate ControlHandlers with interfaces, automatically route requests. 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
a2f5763a67 usb: add add_class to builder, so that FooBarClass::new(&mut builder) can set up everything. 2022-04-06 05:38:11 +02:00
alexmoon
52c622b1cd Use trait objects instead of generics for UsbDevice::classes 2022-04-06 05:38:11 +02:00
alexmoon
bdc6e0481c Add support for USB classes handling control requests. 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
9a6d11281d Add some comments on the example. 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
0320500f0f Working CDC-ACM device->host 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
77ceced036 Working CDC-ACM host->device 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
37598a5b37 wip: experimental async usb stack 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
6731948056 Add async Mutex. 2022-04-06 01:39:58 +02:00
Dario Nieuwenhuis
27a1b0ea73 Simpler Channel.
- Allow initializing in a static, without Forever.
- Remove ability to close, since in embedded enviromnents channels usually live forever and don't get closed.
- Remove MPSC restriction, it's MPMC now. Rename "mpsc" to "channel".
- `Sender` and `Receiver` are still available if you want to enforce a piece of code only has send/receive access, but are optional: you can send/receive directly into the Channel if you want.
2022-04-06 01:34:08 +02:00
Dario Nieuwenhuis
82803bffda Use embassy/defmt-timestamp-uptime in all examples. 2022-04-02 04:35:06 +02:00
Joonas Javanainen
a16fef21e1
Add blinky example for STM32F2
Default configuration is for NUCLEO-F207ZG board
2022-03-27 18:45:37 +03:00
chemicstry
f87c497315 Format 2022-03-17 00:03:24 +02:00
chemicstry
9d71acc49e Cleanup 2022-03-16 23:55:07 +02:00
chemicstry
224071f08e Add F7 example 2022-03-16 23:44:02 +02:00
chemicstry
f08f4df180 Cleanup 2022-03-16 20:33:46 +02:00
chemicstry
8a8e5c4b73 Fix SDMMC v2 and add H7 example 2022-03-16 20:20:39 +02:00
chemicstry
bf4a38ac06 Use RCC frequency instead of config 2022-03-16 19:09:37 +02:00
chemicstry
6d547b1143 SDIO working on stm32f4 2022-03-16 18:52:27 +02:00
Ulf Lilleengen
e09bde9345 Add support for splitting stm32 usart into TX and RX
* Keeps existing API for usart, but wraps it in Tx and Rx sub-types
* Adds split() method similar to nRF for getting indepdendent TX and RX
  parts
* Implements e-h traits for TX and RX types
* Add stm32h7 example
2022-03-15 10:35:37 +01:00
Dario Nieuwenhuis
9bad9365dc Update rust nightly, embedded-hal 1.0, embedded-hal-async. 2022-03-11 00:38:07 +01:00
bors[bot]
3047098c55
Merge #648 #656
648: Fix nRF Saadc continuous sampling r=Dirbaio a=huntc

Starting the sampling task prior to starting the SAADC peripheral can lead to unexpected buffer behaviour with multiple channels. We now provide an init callback at the point where the SAADC has started for the first time. This callback can be used to kick off sampling via PPI.

We also need to trigger the SAADC to start sampling the next buffer when the previous one is ended so that we do not drop samples - the major benefit of double buffering.

Given these additional tasks, we now simplify the API by passing in the TIMER and two PPI channels.

As a bonus, we provide an async `calibrate` method as it is recommended to use before starting up the sampling.

The example has been updated to illustrate these new features along with the simplified API.

The changes here have been tested on my nRF52840-DK.

656: stm32: Refactor DMA interrupts r=Dirbaio a=GrantM11235

Previously, every dma interrupt handler called the same `on_irq`
function which had to check the state of every dma channel.

Now, each dma interrupt handler only calls an `on_irq` method for its
corresponding channel or channels.

Co-authored-by: huntc <huntchr@gmail.com>
Co-authored-by: Grant Miller <GrantM11235@gmail.com>
2022-03-09 00:43:17 +00:00
Grant Miller
ed84d753c7 Update examples 2022-03-08 17:12:50 -06:00
huntc
3990f09b29 Simplifies the API by taking in the TIMER and PPI channels 2022-03-07 14:51:17 +11:00
huntc
98bdac51fe Improve nRF Saadc sampling
Starting the sampling task prior to starting the SAADC peripheral can lead to unexpected buffer behaviour with multiple channels. We now provide an init callback at the point where the SAADC has started for the first time. This callback can be used to kick off sampling via PPI.

We also need to trigger the SAADC to start sampling the next buffer when the previous one is ended so that we do not drop samples - the major benefit of double buffering.

As a bonus we provide a calibrate method as it is recommended to use before starting up the sampling.

The example has been updated to illustrate these new features.
2022-03-07 14:51:17 +11:00
Timo Kröger
4c30543938 [can] Do not use wildcard reexport for bxcan 2022-03-05 09:46:06 +01:00
Matous Hybl
a88c5e716e stm32: Register access for timers now doesn't require self 2022-02-28 16:20:42 +01:00
Cristian Eigel
f4ac3cf364 Improve logic for processing button events 2022-02-16 21:22:35 +01:00
Dario Nieuwenhuis
d9aec181a4 rp: impl eh1.0 blocking traits 2022-02-15 17:29:05 +01:00
bors[bot]
eb922c4655
Merge #608
608: stm32f4: add adc + example r=Dirbaio a=ain101

Example tested on stm32f407vg Discovery Board.
minimal adc: no vref, dma, complex sequence

Co-authored-by: Frederik <frederik@frederik.at>
2022-02-13 11:44:59 +00:00
Dario Nieuwenhuis
340eb4eead stm32: add rust stable support 2022-02-12 02:45:52 +01:00
bors[bot]
f2eb438905
Merge #615
615: rp: remove OptionalPin r=Dirbaio a=Dirbaio

Mirror of https://github.com/embassy-rs/embassy/pull/605 for rp2040

Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
2022-02-12 00:46:40 +00:00
Dario Nieuwenhuis
0c9b1abb67 rp: remove OptionalPin 2022-02-12 01:34:41 +01:00
bors[bot]
e728a32672
Merge #613
613: Rust stable support r=Dirbaio a=Dirbaio

This PR adds (limited) stable Rust support!

The drawbacks are: 

- No `#[embassy::task]`, `#[embassy::main]`. (requires `type_alias_impl_trait`). You have to manually allocate the tasks somewhere they'll live forever. See [example](https://github.com/embassy-rs/embassy/blob/master/examples/nrf/src/bin/raw_spawn.rs)
- No async trait impls (requires GATs). Note that the full API surface of HALs is still available through inherent methods: #552 #581 
- Some stuff is not constructible in const (requires `const_fn_trait_bound`), although there's an (ugly) workaround for the generic `Mutex`.

So it's not that bad in the end, it's fully usable for shipping production-ready firmwares. We'll still recommend nightly as the default, until GATs and `type_alias_impl_trait` are stable.

Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
2022-02-12 00:30:47 +00:00
Dario Nieuwenhuis
20e14b8edb embassy, embassy-nrf: add nightly Cargo feature to gate nightly-only features. 2022-02-12 01:16:31 +01:00
Dario Nieuwenhuis
6c925b2342 blocking_mutex: refactor to work on stable. No GATs, and can be constructed in const. 2022-02-12 01:16:31 +01:00
Dario Nieuwenhuis
6de02bb23e nrf: remove OptionalPin 2022-02-12 01:07:02 +01:00
bors[bot]
5ae4e20f86
Merge #607
607: stm32: Add standard crate-wide macros for pin/dma traits r=Dirbaio a=Dirbaio

All drivers will declare the traits using these macros.

This has a few implications:
- ALL drivers will have an Instance trait, even for drivers that usually have only one instance (for example crc, eth)
- It's no longer possible to have a fn configure() in pin traits, drivers will have to do that some other way

In the future, build.rs will generate all the impls instead of macrotables.

Pin/Dma traits are no longer explicitly sealed, since gpio::Pin and dma::Channel are already sealed, which has the same effect. This means the `af_num()` and `request()` funcs are now public, but IMO that's okay, they're unlikely to change.

Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
2022-02-11 23:11:12 +00:00
Cristian Eigel
0e0e23c5be Add button_events example for stm32f3 2022-02-11 22:10:47 +01:00
Frederik
7a3d28ad00 stm32f4: add adc + example
Example tested on stm32f407vg Discovery Board.
minimal adc: no vref, dma, complex sequence
2022-02-10 23:28:41 +01:00
Dario Nieuwenhuis
b99ab3d5d9 stm32: Add standard crate-wide macros for pin/dma traits, switch all drivers to use them. 2022-02-10 21:38:03 +01:00
Cristian Eigel
898851ceeb Port multiprio example to stm32f3 and stm32f4 platforms 2022-02-10 19:22:32 +01:00
Dario Nieuwenhuis
550da471be stm32: Remove OptionalPin
The idea behind OptionalPin has a few problems:

- you need to impl the signal traits for NoPin which is a bit weird https://github.com/embassy-rs/embassy/blob/master/embassy-stm32/src/dcmi.rs#L413-L416
- you can pass any combination of set/unset pins, which needs checking at runtime  https://github.com/embassy-rs/embassy/blob/master/embassy-stm32/src/dcmi.rs#L130

The replacement is to do multiple `new` constructors for each combination of pins you want to take.
2022-02-10 02:38:10 +01:00
Ulf Lilleengen
ed2a87a262 Add embassy-boot
Embassy-boot is a simple bootloader that works together with an
application to provide firmware update capabilities with a minimal risk.

The bootloader consists of a platform-independent part, which implements
the swap algorithm, and a platform-dependent part (currently only for
nRF) that provides addition functionality such as watchdog timers
softdevice support.
2022-02-09 10:50:29 +01:00
bors[bot]
d91bd0b9a6
Merge #602
602: Add stm32 USB OTG peripherals r=Dirbaio a=chemicstry

Fixes #557. This is similar to #580, but for synopsys IP.

I could add examples to other chips, but I have no way of testing them. The F4 example is tested and working.

Co-authored-by: chemicstry <chemicstry@gmail.com>
2022-02-09 00:29:00 +00:00
chemicstry
a766bf635d Fix function name 2022-02-09 02:04:31 +02:00
chemicstry
1f81a69347 Merge USB FS and HS peripherals. Add ULPI. 2022-02-09 02:02:23 +02:00
Matous Hybl
d37d714314 stm32: Add support for FMC 2022-02-08 17:30:20 +01:00
chemicstry
db0d798b48 Add stm32 USB OTG peripherals 2022-02-08 01:46:32 +02:00
Ulf Lilleengen
f79624c3e6 Upgrade to embedded-storage 0.3.0 2022-02-07 12:35:58 +01:00
bors[bot]
a1d6077446
Merge #591
591: PWM WS2812B example and flexible sequence config r=Dirbaio a=huntc

I've permitted the PWM sequences to be mutated on stopping the PWM by associating them with a new  `SingleSequencer` structure. This is so that we can perform effects on the LEDs (and other use-cases, I'm sure!). The example has been updated to illustrate the use of this by flashing a WS2812B LED.

There's also a `Sequencer` structure for more sophisticated PWM interactions, along with a `pwm_double_sequence`  example to illustrate.

These changes should make it possible to attain all of the nRF PWM functionality available.

Co-authored-by: huntc <huntchr@gmail.com>
2022-02-05 02:20:13 +00:00
huntc
df5ba727f2 Further API simplification for the single seq scenario 2022-02-05 08:05:23 +11:00
huntc
81d31e43eb Removed unrequired clone 2022-02-04 19:18:10 +11:00
huntc
965a5f2c3f Introduced the SingleSequencer and a more complex Sequencer 2022-02-04 19:11:15 +11:00
huntc
9e36ede363 Small correction to times 2022-02-04 16:48:26 +11:00
huntc
e9e4d058d1 Revert the use of forever 2022-02-04 16:39:14 +11:00
huntc
81f98c32aa Update another example 2022-02-04 16:34:25 +11:00
huntc
fe5501293f Expose PWM 2022-02-04 16:26:23 +11:00
huntc
1af6b23f97 Introduces a Sequences struct 2022-02-04 13:04:55 +11:00
huntc
986295998a Some more doco 2022-01-30 16:26:09 +11:00
huntc
1c67bd4643 Revert "Own the sequence buffer"
This reverts commit 482389a691.
2022-01-30 16:21:23 +11:00
huntc
482389a691 Own the sequence buffer
This approach owns the sequence buffers which, while introducing an extra move, it eliminates the need to guard the lifetime of the sequence buffer. Given ownership, the buffer will be retained until the PWM sequence task is stopped.
2022-01-29 18:01:06 +11:00
huntc
9ac52a768b Now permits sequences to be mutated subsequently 2022-01-28 16:32:58 +11:00
huntc
12ce024574 Make the sequence a little nicer to pass around 2022-01-28 13:38:20 +11:00
huntc
47aeab152f PWM WS2812B example and per sequence config
Demonstrates how to set the colour of a WS2812B to blue using PWM, and the use of multiple sequences along with their own config. This required an API change.
2022-01-28 11:20:04 +11:00
Dario Nieuwenhuis
0719b05d63 traits: migrate Delay to embedded-hal 1.0+async, remove Rng and Flash. 2022-01-27 00:08:02 +01:00
Ulf Lilleengen
4032fc0655 Support unstable-trait feature for stm32 2022-01-26 22:39:06 +01:00
huntc
c9f29534d6 Stop PWM before assigning the new sequence
I had introduced a small bug in my last PR where I assigned the sequence before stopping the PWM. I now stop the PWM before doing that now.

Also, corrected a math comment.
2022-01-25 16:51:24 +11:00
bors[bot]
0549a9dbaa
Merge #585
585: Permit many sequences to be passed r=huntc a=huntc

Sequences are now passed in via the start method to avoid having to stop the PWM and restart it. Sequences continue to be constrained with the same lifetime of the Pwm struct itself. The pwm_sequence example has been extended to illustrate multiple sequences being passed around.

Co-authored-by: huntc <huntchr@gmail.com>
2022-01-24 21:42:01 +00:00
huntc
48afef28a0 Strengthen the borrow
The start method is now safe. Because it has the potential of borrowing the sequence and mutating itself, the sequence must outlive the Pwm struct.
2022-01-24 17:22:35 +11:00
Dario Nieuwenhuis
79f60adbfb stm32: add time-driver-any cargo feature that automatically picks one available timer. 2022-01-24 00:24:53 +01:00
huntc
7598b8a40f Permit many sequences to be passed
Sequences are now passed in via the start method to avoid having to stop the PWM and restart it. Sequences continue to be constrained with the same lifetime of the Pwm object itself. The pwm_sequence example has been extended to illustrate multiple sequences being passed around.
2022-01-23 16:29:52 +11:00
Dario Nieuwenhuis
889d757ab8 stm32/spi: expose all functionality as inherent methods. 2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
97ab859f00 stm32/i2c: expose all functionality as inherent methods. 2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
c949519714 stm32/usart: expose all functionality as inherent methods. 2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
98f24bf819 examples/stm32l0: cleanup 2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
b526addf7b stm32/exti: expose all functionality as inherent methods. 2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
58fc64722c stm32/gpio: expose all functionality as inherent methods. 2022-01-19 17:59:55 +01:00
Greg V
9fb2b5fa86 examples/stm32l1: remove memory.x, use the crate-provided one 2022-01-14 22:59:57 +03:00
Dario Nieuwenhuis
7997687f3b nrf: impl embedded-hal 1.0 and embedded-hal-async traits. 2022-01-13 23:56:39 +01:00
Dario Nieuwenhuis
6eec3d8acc nrf/rng: expose all functionality as inherent methods. 2022-01-13 23:56:39 +01:00
Dario Nieuwenhuis
df00c83984 nrf/qspi: expose all functionality as inherent methods. 2022-01-13 23:56:39 +01:00
Dario Nieuwenhuis
3e503e7335 nrf/uarte: expose all functionality as inherent methods. 2022-01-13 23:56:39 +01:00
Dario Nieuwenhuis
c432d036c7 nrf/gpiote: expose all functionality as inherent methods. 2022-01-13 23:56:39 +01:00
Dario Nieuwenhuis
ecb4f8fb00 nrf/twim: expose all functionality as inherent methods. 2022-01-13 23:56:39 +01:00
Dario Nieuwenhuis
a287fef687 nrf/spim: expose all functionality as inherent methods. 2022-01-13 23:56:39 +01:00
Matous Hybl
e056bedd55 Port the PWM example to H7, add low-level API example implementing 32-bit PWM. 2022-01-13 16:53:55 +01:00
Ulf Lilleengen
2bc105803a Make exti an optional feature
* Add embassy-stm32 build with exti
* Add exti to examples
2022-01-12 14:28:10 +01:00
huntc
d5d8897c84 Remove unsafe from new on RND
Unsafe is not required here given that all futures are required to live longer than their global peripheral instances. There are other occurrences of unsafe being used on new that should be removed. I started to do that but then went down a bit of a rabbit hole.
2022-01-06 09:59:28 +11:00
Dario Nieuwenhuis
2eb0cc5df7 stm32/rcc: remove Rcc struct, RccExt trait.
All the RCC configuration is executed in init().
2022-01-05 00:00:44 +01:00
Dario Nieuwenhuis
89b009b11d stm32h7/rcc: remove unneeded DMA enable settings.
These are automatically enabled by dma::init().
2022-01-04 13:31:30 +01:00
Dario Nieuwenhuis
cdc66e110f stm32/rcc: remove builders on Config.
This makes API consistent with other Config structs in Embassy, where
the convention is to not use builders.
2022-01-04 13:31:30 +01:00
bors[bot]
f744b74e90
Merge #539
539: nrf: async usb r=Dirbaio a=jacobrosenthal

Frankensteined together from this old pr https://github.com/embassy-rs/embassy/pull/115 and nrf-usdb

~Doesnt currently work..~

Co-authored-by: Jacob Rosenthal <jacobrosenthal@gmail.com>
2022-01-04 07:41:54 +00:00
bors[bot]
cdfd128185
Merge #545
545: Add adapter for implementing async traits for blocking types r=lulf a=lulf

This allows writing drivers relying on async traits, while still
functioning with implementations that already implement the embedded-hal
traits.

Co-authored-by: Ulf Lilleengen <lulf@redhat.com>
2022-01-03 14:17:21 +00:00
bors[bot]
c0e94a7042
Merge #563
563: Initial ADC support for on STM32F1xx  r=Dirbaio a=sjoerdsimons

Add an ADC implementation for F1 based chips. Primarily tested using ADC1, proper functionality for ADC2 probably needs some extra work as it's mainly a slave and can't e.g. measure vrefint by itself.

Needs https://github.com/embassy-rs/stm32-data/pull/115

Co-authored-by: Sjoerd Simons <sjoerd@collabora.com>
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
2022-01-01 11:45:23 +00:00
Sjoerd Simons
dafc4c54e9 examples: stm32f1: Add an example of using the ADC 2021-12-30 10:53:39 +01:00
Sjoerd Simons
f0f08f298b examples: stm32f1: Optimize for size on development builds
Even the basic examples seemingly need to be build optimized for size to
allow flashing to a bluepill
2021-12-30 10:53:01 +01:00
Robert Walker
1028b5c671 Review changes 2021-12-29 08:17:51 +01:00
Robert Walker
4271226fc0 Added and tested the usart dma example for stm32f767zi using a
Nucleo-f767zi board.
2021-12-28 08:33:34 +01:00
Dario Nieuwenhuis
22bc1e4ae1 nrf/gpio: add infallible inherent methods, remove some duplication.
This implements Input and Output using FlexPin, to avoid some code duplication.
2021-12-20 00:55:18 +01:00
Ulf Lilleengen
3811c0a401 Add adapter for implementing async traits for blocking types
This allows writing drivers relying on async traits, while still
functioning with implementations that already implement the embedded-hal
traits.

Add examples to stm32l4 for using this feature.
2021-12-17 12:54:51 +01:00
Jacob Rosenthal
e7d2c52680 example cleanup 2021-12-16 15:20:56 -07:00
Jacob Rosenthal
1d51f91368 usb_uart_io example equivilent to usb_uart 2021-12-16 14:59:35 -07:00
Jacob Rosenthal
1f2bbe3e4a simplify usb_uart example 2021-12-16 14:59:08 -07:00
Ulf Lilleengen
985c11fad5 Update rust-toolchain 2021-12-16 11:34:20 +01:00
bors[bot]
5df16c6793
Merge #544
544: Introduces split on the nRF Uarte r=Dirbaio a=huntc

A new `split` method is introduced such that the Uarte tx and rx can be used from separate tasks. An MPSC is used in an example to illustrate how data may be passed between these tasks.

The approach taken within the `Uarte` struct is to split into tx and rx fields on calling `Uarte::new`. These fields are returned given a call to `Uarte::split`, but otherwise, if that call isn't made, then the API remains as it was before.

Here's a snippet from a new example introduced:

```rust
#[embassy::main]
async fn main(spawner: Spawner, p: Peripherals) {
    // ...

    let uart = uarte::Uarte::new(p.UARTE0, irq, p.P0_08, p.P0_06, NoPin, NoPin, config);
    let (mut tx, rx) = uart.split();

    // ...

    // Spawn a task responsible purely for reading

    unwrap!(spawner.spawn(reader(rx, s)));

    // ...

    // Continue reading in this main task and write
    // back out the buffer we receive from the read
    // task.
    loop {
        if let Some(buf) = r.recv().await {
            info!("writing...");
            unwrap!(tx.write(&buf).await);
        }
    }
}

#[embassy::task]
async fn reader(mut rx: UarteRx<'static, UARTE0>, s: Sender<'static, Noop, [u8; 8], 1>) {
    let mut buf = [0; 8];
    loop {
        info!("reading...");
        unwrap!(rx.read(&mut buf).await);
        unwrap!(s.send(buf).await);
    }
}
```


Co-authored-by: huntc <huntchr@gmail.com>
2021-12-16 07:44:40 +00:00
bors[bot]
d5a3064c2c
Merge #540
540: Initial support for STM32F3 r=Dirbaio a=VasanthakumarV

The [companion PR](https://github.com/embassy-rs/stm32-data/pull/109) in `stm32-data` should be merged before this PR.
The examples were tested on an STM32F303VC MCU.

Co-authored-by: VasanthakumarV <vasanth260m12@gmail.com>
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
2021-12-16 07:30:03 +00:00
Jacob Rosenthal
5d19f87acb cleanup example 2021-12-15 12:30:48 -07:00
Jacob Rosenthal
61f12324ff enable USB peripheral for relevant chips 2021-12-15 10:23:19 -07:00
Jacob Rosenthal
79502330de rename to UsbBus 2021-12-15 09:59:56 -07:00
huntc
1374ad2ab6 Introduces split on the nRF Uarte
A new `split` method is introduced such that the Uarte tx and rx can be used from separate tasks. An MPSC is used to illustrate how data may be passed between these tasks.
2021-12-15 18:31:52 +11:00
Jacob Rosenthal
5f0fefbd25 dont rely on nrf-usdb 2021-12-14 16:51:34 -07:00
Jacob Rosenthal
3debe604fb sorta works, too many interupts? 2021-12-14 16:48:48 -07:00
Jacob Rosenthal
07cbd41131 dont expose embedded_hal_common::usb 2021-12-14 15:47:54 -07:00
Jacob Rosenthal
f31140a70b revert 2021-12-14 13:51:50 -07:00
bors[bot]
1a7b9e3279
Merge #542
542: nrf/gpiote: remove PortInput, move impls to Input/FlexPin. r=Dirbaio a=Dirbaio

`PortInput` is just a dumb wrapper around `Input`, it has no reason whatsoever to exist. This PR moves the `wait_for_x` functionality to `Input` directly.

It also adds it to `FlexPin` for completeness and consistency with `Input`.

(The reason `PortInput` exists is a while ago `GPIOTE` was an owned singleton that you had to initialize, so `PortInput::new()` would require it to enforce it's been initialized. This doesn't apply anymore now that GPIOTE is "global")

Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
2021-12-14 14:09:59 +00:00
Dario Nieuwenhuis
153b1bbdbf nrf/gpiote: remove PortInput, move impls to Input. 2021-12-14 13:23:40 +01:00
Jacob Rosenthal
535d30335a make send, consolidate usb types 2021-12-13 18:13:42 -07:00
Jacob Rosenthal
83a1237ea3 stub out the embassy registers for usbd 2021-12-13 18:04:54 -07:00
VasanthakumarV
a65c2bc2b4 [examples] Add examples for STM32F3 2021-12-13 14:50:13 +05:30
Jacob Rosenthal
e5dc63e8e9 usb feature gate 2021-12-12 21:39:59 -07:00
Jacob Rosenthal
f430c0e8c2 nrf-usbd 2021-12-12 19:20:02 -07:00
bors[bot]
052abc918a
Merge #537
537: Documents the nRF BufferedUarte problem r=Dirbaio a=huntc

Please see https://github.com/embassy-rs/embassy/issues/536 for the rationale.

Co-authored-by: huntc <huntchr@gmail.com>
2021-12-12 20:35:43 +00:00
Matous Hybl
e95b96f3a4 Use smoltcp 0.8.0 from crates.io. 2021-12-12 15:32:36 +01:00
huntc
dc3469b297 Documents the nRF BufferedUarte problem
Please see https://github.com/embassy-rs/embassy/issues/536 for the rationale.
2021-12-12 17:52:17 +11:00
Ulf Lilleengen
9b01eed195 Revert blinky changes for now 2021-12-10 12:32:20 +01:00
Ulf Lilleengen
e93f2679b1 More content 2021-12-10 12:27:44 +01:00
huntc
7256ff3e71 Provides AsyncWrite with flush
As per Tokio and others, this commit provides a `poll_flush` method on `AsyncWrite` so that a best-effort attempt at wakening once all bytes are flushed can be made.
2021-12-10 12:16:08 +11:00
Matous Hybl
484c356c03 Add DCMI example. 2021-12-09 12:56:39 +01:00
Matous Hybl
d6f3b479df Use smoltcp revision from its master branch. 2021-12-09 12:15:32 +01:00
Matous Hybl
9d62e886fb Do not use exported Result to mitigate problems with clap. 2021-12-08 22:19:13 +01:00
Dario Nieuwenhuis
00a87b9a41 Fix build examples with defmt. 2021-12-06 21:58:57 +01:00
Matous Hybl
a802fd83aa Fix embassy-net documentation of running examples. 2021-12-06 14:59:15 +01:00
Ulf Lilleengen
9a730ef692 Refactor sx127x radio to use async SPI with DMA 2021-12-03 09:53:28 +01:00
Ulf Lilleengen
b9693c0b91 Update rust-lorawan to version supporting defmt 0.3 2021-12-02 19:10:29 +01:00
huntc
469852c667 Removed unsafe from uarte
The constructors themselves are not strictly unsafe. Interactions with DMA can be generally unsafe if a future is dropped, but that's a separate issue. It is important that we use the `unsafe` keyword diligently as it can lead to confusion otherwise.
2021-12-01 09:14:24 +11:00
Dario Nieuwenhuis
3332c40705 examples: remove unused deps. 2021-11-29 02:07:48 +01:00
Dario Nieuwenhuis
e40555e245 examples/stm32g4: add pwm example 2021-11-27 03:06:46 +01:00
Dario Nieuwenhuis
88d4b0c00d stm32: add stm32g4 support. 2021-11-27 02:34:23 +01:00
bors[bot]
c7d9729028
Merge #486
486: Pwm ppi events r=Dirbaio a=jacobrosenthal

More PWM yak shaving. I was going to do some safe pwm ppi events stuff but I just dont think it fits this api design.. ppi is just very low level, im not sure how safe it will be in general

* first we should probably have borrows of handlers for ppi with lifetime of the peripheral?  hal does eb4ba6ae42/nrf-hal-common/src/pwm.rs (L714-L716)
* in general having access to tasks can put the state in some configuration the api doesnt understand anymore. for `SequencePwm` ideally id hand you back either only seq_start0 or seq_start1 because youd only use one based on if your `Times` is even or odd.. but again we only know that with this api AFTER start has been called. I dont think were ready for typestates

SO I figured why not add the pwm ppi events but make them unsafe and commit this example since I started it.

Somewhat related drop IS removing the last duty cycle from the pin correctly, but stop DOES NOT..the only thing that sets the pin back is pin.conf() as far as I can tell, so I tried to document that better and got rid of stop for the `SimplePwm` again since that doesnt need it then. However its ackward we dont have a way to unset the pwm without setting a new sequence of 0s, or dropping the peripheral


Co-authored-by: Jacob Rosenthal <jacobrosenthal@gmail.com>
2021-11-26 23:08:24 +00:00
Dario Nieuwenhuis
c257893da9 net: update smoltcp 2021-11-26 04:12:14 +01:00
Dario Nieuwenhuis
e4de15e4de net: don't depend directly on smoltcp outside embassy-net 2021-11-24 17:48:48 +01:00
bors[bot]
8fea6c94f6
Merge #501
501: stm32-metapac cleanups r=Dirbaio a=Dirbaio



Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
2021-11-24 01:00:22 +00:00
Dario Nieuwenhuis
dfb6d407a1 stm32: rename core features from _cmX to -cmX, cleanup gen. 2021-11-23 23:49:06 +01:00
Matous Hybl
0ca6060bfd Fix interrupt_take macro by specifying path to panic macro. 2021-11-23 11:00:37 +01:00
Bob McWhirter
2649984b55 Adjust the config.toml for U5.
- Correct ISA
- Remove commented-out cruft.
2021-11-17 10:35:25 -05:00
Dario Nieuwenhuis
9b17b3d721 Remove unused deps 2021-11-15 20:13:22 +01:00
Bob McWhirter
436eb81fc2 Adjust for bxcan API. 2021-11-15 12:00:26 -05:00
Bob McWhirter
57ca241658 Further cargo muckings for smol/defmt. 2021-11-15 11:40:06 -05:00
Bob McWhirter
23fdca9e52 Remove extraneous defmt-trace feature. 2021-11-15 11:33:44 -05:00
Bob McWhirter
a770fc77c9 Adjust all examples to defmt 0.3. 2021-11-15 11:19:19 -05:00
Bob McWhirter
c2da498263 Update to defmt 3.0ish.
Lots of gitrevs deps.
2021-11-15 11:09:08 -05:00
Jacob Rosenthal
2bcacd4f16 nrf: sequencepwm add events 2021-11-13 16:24:41 -07:00
Jacob Rosenthal
aca7b86c7e pwm_sequence show implicit and explicit stop functionality 2021-11-11 23:47:35 -07:00
Jacob Rosenthal
b4cb24c735 pwm_servo example comment for clarity 2021-11-11 23:32:34 -07:00
Jacob Rosenthal
67baec472d nrf: dump the pwm_sequence example for clarity
It is basically impossible to directly convert that example to a sequence for various reasons. You cant have multiple channels on same buffer with one sequence instance for starters, also at that clock rate and max_duty 1 period is far longer than the 3ms it was using, which would require using a new max_duty and thus require regenerating the sine table which makes it not representitive of the original example anymore
2021-11-11 23:31:10 -07:00
Jacob Rosenthal
937f49dead nrf: sequencepwm rename top to max_duty for consistancy 2021-11-11 22:47:57 -07:00
Jacob Rosenthal
ea1c62ff61 fix 2021-11-11 20:12:50 -07:00
Jacob Rosenthal
639034cee4 fix 2021-11-11 19:58:45 -07:00
Jacob Rosenthal
ec66fcd01a pwm_sequence consume buffer 2021-11-11 19:14:29 -07:00
bors[bot]
4112759a8f
Merge #455
455: simple_playback api from nrf sdk r=Dirbaio a=jacobrosenthal

Port of the nrf_drv_pwm_simple_playback call from the nordic sdk that allows you to set up a sequence to play across leds with no interaction necessary using the 'shorts' registers to trigger looping sequences



Co-authored-by: Jacob Rosenthal <jacobrosenthal@gmail.com>
2021-11-11 16:26:36 +00:00
bors[bot]
8193885cb5
Merge #482
482: Add MCO peripheral. r=Dirbaio a=matoushybl

This PR adds an abstraction over STM32 RCC feature called MCO (Microcontroller Clock Output). The clock output can bind to several clock sources and then can be scaled using a prescaler.

Given that from the embassy ecosystem the RCC is generaly invisible to the user, the MCO was implemented as a separate peripheral bound to the pin where the clock should appear.

Co-authored-by: Matous Hybl <hyblmatous@gmail.com>
2021-11-11 16:20:02 +00:00
Matous Hybl
c14642cffc Add MCO peripheral. 2021-11-11 11:34:09 +01:00
Jacob Rosenthal
2973ff4cf0 remove unstable feature and dependency, and make pwm_sequence a near mirror of pwm example 2021-11-10 18:49:24 -07:00
bors[bot]
96e2f0dfc5
Merge #468
468: Add v1c ethernet driver for the STM32F7 family. r=Dirbaio a=matoushybl



Co-authored-by: Matous Hybl <hyblmatous@gmail.com>
2021-11-10 22:07:38 +00:00
Jacob Rosenthal
751617c2be fix examples for mut self set_duty 2021-11-10 12:48:15 -07:00
Matous Hybl
f0ba79059e Add v1c ethernet driver for the STM32F7 family. 2021-11-10 10:16:46 +01:00
Bob McWhirter
5f124ec49f Update U5 to init RCC. 2021-11-08 14:20:51 -05:00
Dario Nieuwenhuis
2221e1fa93 Replace rustflags with build.rs extra-link-args.
Rustflags apply to ALL the crates in the graph, while we only need
them for the toplevel crate which is the only one getting linked.

Rustflags are not equal for all crates, this caused cargo to re-build the
same dependency crate multiple times uselessly. After this change, deps
are reused more, making builds faster.

Note that this only applies when sharing the target/ dir for multiple crates
in the repo which is not the default.
2021-11-07 23:52:11 +01:00
Matous Hybl
9b5d9fbfca Fix v2 ethernet pin definitions. Fix ethernet example for H7 nucleos. 2021-11-04 16:25:30 +01:00
Jacob Rosenthal
b726ef1886 make SequenceConfig struct is consistent with other Config structs, that are always non_exhaustive and have a Default 2021-11-03 18:37:54 -07:00
Jacob Rosenthal
d961fd1015 rename to SimplePwm and SequencePwm 2021-11-03 18:25:44 -07:00
Jacob Rosenthal
44375b427c restore example and add set_time_stretch api 2021-11-03 15:29:09 -07:00
bors[bot]
1bf6e646c9
Merge #465
465: Adjust for STM32U5. r=lulf a=bobmcwhirter



Co-authored-by: Bob McWhirter <bmcwhirt@redhat.com>
2021-11-02 20:42:41 +00:00
Bob McWhirter
f9c266bc10 Omg. More formatting. 2021-11-02 16:06:49 -04:00
Bob McWhirter
16c88e3094 Need to include a bit of embassy for the NVIC. 2021-11-02 15:58:40 -04:00
Bob McWhirter
9deafa8bab Remove unused imports. 2021-11-02 15:56:04 -04:00
Bob McWhirter
eaaaa2460a Formatting, per usual. 2021-11-02 14:53:53 -04:00
Bob McWhirter
3ab1775820 Add STM32U5 example. 2021-11-02 14:43:42 -04:00
Jacob Rosenthal
c939edb8d0 rename error enum again 2021-11-02 10:57:01 -07:00
Ulf Lilleengen
205a223af3 Update versions of critical-section and atomic-polyfill 2021-11-02 18:52:03 +01:00
Bob McWhirter
f12b70535b Adjust for STM32U5. 2021-11-02 12:05:24 -04:00
Jacob Rosenthal
4647792ad6 seperate start from pwmseq::new 2021-11-01 20:50:18 -07:00
Jacob Rosenthal
49253152cf seperate sequence from duty cycle pwm struct 2021-11-01 20:50:14 -07:00
Jacob Rosenthal
b297e5f7bd led dimming example, dont need to keep all examples, just covering ground to test api 2021-11-01 13:51:40 -07:00
Jacob Rosenthal
5285179218 generalize new and change pwm example to a servo 2021-11-01 13:08:51 -07:00
Jacob Rosenthal
12b2c5d5f7 better not as a constructor? 2021-11-01 08:54:07 -07:00
Jacob Rosenthal
90be851e4b reduce complexity of loopmode 2021-11-01 08:45:07 -07:00
Jacob Rosenthal
14dc524b84 documentation 2021-11-01 01:20:01 -07:00
Jacob Rosenthal
78e382c9aa stop->sequence_stop 2021-10-31 23:13:49 -07:00
Jacob Rosenthal
763e250dfe add ability to configure loop count from 1 to infinite 2021-10-30 16:16:10 -07:00
Jacob Rosenthal
ef95441442 a runtime generated sin table example 2021-10-29 17:10:37 -07:00
Jacob Rosenthal
1d1d8a848e simplify api, more interesting example 2021-10-29 16:39:41 -07:00
Jacob Rosenthal
eb0bf1fd7a simple_playback api from nrf sdk 2021-10-29 16:27:26 -07:00
Matous Hybl
015cad84dd Initial support for STM32F767ZI. 2021-10-26 17:33:28 +02:00
Dion Dokter
4d3341dbb9 Fixed examples 2021-10-26 14:47:33 +02:00
Dion Dokter
11655af034 Another redo using the feedback.
PPI is now split up into PPI and DPPI under the name 'interconnect'.
The tasks and events are tracked and reset in the drop function.
2021-10-26 14:47:12 +02:00
Dion Dokter
e6ec81b999 Fixed examples and added defmt format to the new error types 2021-10-26 14:46:39 +02:00
Dion Dokter
65628e1f15 - Added _ppi and _dppi to distinguish between the new and the old peripheral.
- Removed ConfigurableChannel and added capacity numbers to the channels
- Replaced the PPI api with a new one using the DPPI terminology (publish & subscribe)
- Updated all tasks and event registers for DPPI
2021-10-26 14:46:39 +02:00
bors[bot]
01e5376b25
Merge #456
456: Fix L4 clock setup for MSI and PLL to allow RNG operation r=Dirbaio a=lulf

Example is tested on STM32L475VG.

Co-authored-by: Ulf Lilleengen <lulf@redhat.com>
2021-10-26 11:59:14 +00:00
bors[bot]
f8bd9d2b1c
Merge #441
441: Add implementation of async trait for STM32 I2C v2 r=Dirbaio a=lulf

* Add DMA read implementation for I2C v2
* Add example using DMA for I2C

Co-authored-by: Ulf Lilleengen <ulf.lilleengen@gmail.com>
2021-10-26 11:49:45 +00:00
Ulf Lilleengen
e55726964d Fix clock setup for MSI and PLL to allow RNG opereation
Add RNG example using PLL as clock source.
2021-10-26 13:45:53 +02:00
bors[bot]
f3f3858328
Merge #444
444: nrf: add NVMC driver. r=lulf a=Dirbaio

I haven't implemented `embassy_traits::Flash` because I want to change it to match embedded_storage, which is much better designed. 

Either way, NVMC can't do async anyway, so the best we could do is implementing the async trait in a blocking way...

Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
2021-10-23 08:28:25 +00:00
Ulf Lilleengen
504655d491 Use upstream version of rust-lorawan 2021-10-22 19:33:15 +02:00
Dario Nieuwenhuis
e78d226acd nrf: add NVMC driver. 2021-10-22 02:14:33 +02:00
Ulf Lilleengen
f8ebc967a9 Add implementation of async trait for STM32 I2C v2
* Add DMA read implementation for I2C v2
* Add example using DMA for I2C
2021-10-21 12:30:02 +02:00
bors[bot]
acce0f1d25
Merge #440
440: Add i2c example for L4 r=Dirbaio a=lulf

Tested to work on STM32 IOT01A  (STM32L475VG) board.

Co-authored-by: Ulf Lilleengen <ulf.lilleengen@gmail.com>
2021-10-20 11:34:18 +00:00
Ulf Lilleengen
9e461b771a Add i2c example for L4 2021-10-20 10:11:34 +02:00
Ulf Lilleengen
e807a9eaec Specify unit in log output 2021-10-19 15:32:16 +02:00
Ulf Lilleengen
2ef4a45fa0 Add support for temperature sensor peripheral
* Add TEMP peripheral to all nRF52 chips
* Add async HAL for reading temperature values
* Add example application reading temperature values
2021-10-19 07:18:56 +02:00
bors[bot]
a5c11b1a80
Merge #425
425: Implements continuous sampling for the nRF SAADC r=huntc a=huntc

Implements continuous sampling for the nRF SAADC and also renames `OneShot` to `Saadc`. The one-shot behaviour is retained with the `sample` method and a new `run_sampler` method is provided for efficiently (i.e. zero copying) sampler processing. A double buffer is used for continuously sampling, which is swapped appropriately.

A sample frequency is provided and will set the internal timer of the SAADC when there is just one channel being sampled. Otherwise, PPI will be used to hook up the TIMER peripheral to drive the sampling task. Two methods are provided for this: `run_task_sampler` and `run_task_sampler` with the latter available where the compiler sees that just one channel is configured. Note that we set up the PPI and timer behaviour outside of the `Saadc` for maximum flexibility.

A callback is provided to the `run_sampler` method. This is a synchronous callback that should return in a reasonably short space of time. The SAADC could stall if it does not. A reasonable practice is to perform a small amount of processing within the callback to yield a signal, perhaps via `mpsc`. In the case of `mpsc`, the `try_send` method becomes useful.

A new example has been provided to illustrate continuous sampling, along with multiple channels and external timing:

```rust
#[embassy::main]
async fn main(_spawner: Spawner, mut p: Peripherals) {
    let config = Config::default();
    let channel_1_config = ChannelConfig::single_ended(&mut p.P0_02);
    let channel_2_config = ChannelConfig::single_ended(&mut p.P0_03);
    let channel_3_config = ChannelConfig::single_ended(&mut p.P0_04);
    let mut saadc = Saadc::new(
        p.SAADC,
        interrupt::take!(SAADC),
        config,
        [channel_1_config, channel_2_config, channel_3_config],
    );

    let mut timer = Timer::new(p.TIMER0);
    timer.set_frequency(Frequency::F1MHz);
    timer.cc(0).write(100); // We want to sample at 10KHz
    timer.cc(0).short_compare_clear();

    let mut ppi = Ppi::new(p.PPI_CH0);
    ppi.set_event(timer.cc(0).event_compare());
    ppi.set_task(saadc.task_sample());
    ppi.enable();

    timer.start();

    let mut bufs = [[[0; 3]; 50]; 2];

    let mut c = 0;
    let mut a: i32 = 0;

    saadc
        .run_task_sampler(&mut bufs, move |buf| {
            for b in buf {
                a += b[0] as i32;
            }
            c += buf.len();
            if c > 10000 {
                a = a / c as i32;
                info!("channel 1: {=i32}", a);
                c = 0;
                a = 0;
            }
            SamplerState::Sampled
        })
        .await;
}
```

Co-authored-by: huntc <huntchr@gmail.com>
2021-10-18 00:51:19 +00:00
Dario Nieuwenhuis
d7b768992e examples/std: fix warning 2021-10-18 01:37:35 +02:00
huntc
785030df96 Use types to strengthen the buffer dimensioning 2021-10-18 10:26:11 +11:00
huntc
cb56f52b99 Removed the Mode enum and factored out into two functions so that we can assert channel limits 2021-10-18 10:26:11 +11:00
huntc
fa82913bc3 We have to reduce the buffer size to cater for the number of channels to scan 2021-10-18 10:26:11 +11:00
huntc
3be274dc2a We must allow the run handler to mutate state
The handler may well need to close over and mutate state
2021-10-18 10:26:11 +11:00
huntc
103a3305e2 Implements continuous sampling for the nRF SAADC
Implements continuous sampling for the nRF SAADC and also renames `OneShot` to `Saadc`. The one-shot behaviour is retained with the `sample` method and a new `run_sampler` method is provided for efficiently (i.e. zero copying) sampler processing. A double buffer is used for continuously sampling, which wlll be swapped once sampling has taken place.

A sample frequency is provided and will set the internal timer of the SAADC when there is just the one channel being sampled. Otherwise, PPI will be used to hook up the TIMER peripheral to drive the sampling task.
2021-10-18 10:26:11 +11:00
Dario Nieuwenhuis
f5e251fc81 Update clap 2021-10-18 01:19:01 +02:00
Ulf Lilleengen
5ae276fe50 Update to newer revision of async lorawan stack 2021-10-11 13:51:00 +02:00
Dario Nieuwenhuis
902f566b9a
Merge pull request #417 from huntc/extend-saadc
Extend SAADC one shot support
2021-10-11 00:45:49 +02:00
Dario Nieuwenhuis
1c4c813255
Merge pull request #410 from lulf/embassy-lora
Add embassy-lora crate
2021-10-10 21:23:02 +02:00
huntc
cef6158c31 Extend SAADC one shot support
One-shot mode now permits the sampling of differential pins, and the sampling of multiple pins simultaneously.

A new ChannelConfig structure has been introduced so that multiple channels can be configured individually. Further, the `sample` method now accepts a buffer into which samples are written.

Along the way, I've reset some default configuration to align with Nordic's settings in their nrfx saadc driver. Specifically, the channel gain defaults to 6 (from 4) and the time defaults to 10us (from 20us).
2021-10-09 11:25:18 +11:00
Dario Nieuwenhuis
0e05ba688d nrf/saadc: remove Sample trait. 2021-10-07 02:10:22 +02:00
Ulf Lilleengen
16a47a0ad9 Add embassy-lora crate
This crate contains async radio drivers for various lora drivers that
work with embassy timers. The code is imported from Drogue Device (
https://github.com/drogue-iot/drogue-device)

The radio drivers integrate with the async LoRaWAN MAC layer in the
lorawan-device crate.

Also added is an example for the STM32WL55 and for STM32L0 (requires
the LoRa Discovery board) for LoRaWAN. Future work is to make the
underlying radio drivers using fully async SPI when communicating
with the peripheral.
2021-09-30 10:32:24 +02:00
Mariusz Ryndzionek
bce909ec1e Initial STM32F1 family support with two examples for STM32F103C8 (Blue Pill) 2021-09-28 18:31:04 +02:00
Ulf Lilleengen
c79485c286 Support for STM32L1
* Add RCC
* Fix more issues with dash in chip names
* Update stm32-data version
* Add blinky and spi example
2021-09-21 14:50:23 +02:00
Ulf Lilleengen
99a94f1d50 Update version of critical-section 2021-09-13 17:05:17 +02:00
Ulf Lilleengen
e24528051b Add WASM support for executor
* Adds an executor for WASM runtimes based on wasm_bindgen.
* Add time driver based on JS time handling.
* Add example that can run in browser locally.
* Update to critical-section version that supports 'std' flag
2021-09-13 16:42:39 +02:00
Dario Nieuwenhuis
70e5877d68 embassy/channel: switch to use MutexKind 2021-09-13 00:08:41 +02:00
Dario Nieuwenhuis
ead987245d embassy: Refactor module structure to remove kitchen-sink util. 2021-09-11 02:35:35 +02:00
Dario Nieuwenhuis
f2623e7e9b Update lots of deps 2021-09-11 01:35:23 +02:00
Dario Nieuwenhuis
eff8ae9c4d
Merge pull request #381 from lulf/stm32wl55-subghz
Add HAL for SubGhz peripheral for STM32 WL series
2021-09-06 00:58:42 +02:00
Dario Nieuwenhuis
de016e8456 Remove trait_alias, allow(incomplete_features).
trait_alias seems unused. no idea why it's there.
2021-09-03 17:00:58 +02:00
Ulf Lilleengen
5f04d6e6c5 Fix embassy::main macros for std target 2021-09-02 14:45:54 +02:00
Dario Nieuwenhuis
d0c8749399
Merge pull request #382 from fnafnio/typestate_nrf_timer
Typestate nrf timer
2021-09-02 13:39:55 +02:00
f_punk
34c66fa78d removed type aliases
NotAwaitable as default generic param
added awaitable_timer example
2021-09-02 12:02:31 +02:00
Ulf Lilleengen
7ad6280e65 Add HAL for SubGhz peripheral for STM32 WL series
Based on the HAL from stm32wl, the peripheral driver has been
modified to fit into embassy, using the embassy APIs, providing
operation of the radio peripheral.

The initial version does not offer any async APIs, but the example
shows how the radio IRQ can be used to perform async TX of the radio.
2021-09-02 10:39:56 +02:00
Dario Nieuwenhuis
db3cb02032
Merge pull request #383 from embassy-rs/saadc-fixes
nrf: Saadc fixes
2021-09-01 23:59:56 +02:00
Dario Nieuwenhuis
6b158ba94a nrf/saadc: add example 2021-09-01 23:55:20 +02:00
Dario Nieuwenhuis
bc68657c23
Merge pull request #379 from bobmcwhirter/random_range
Random range
2021-09-01 22:53:10 +02:00
Bob McWhirter
aaa4a477d5 Formatting. 2021-09-01 09:47:46 -04:00
Bob McWhirter
37ceae908b Rename Random impl to Rng.
Create Random struct providing next_x(range) for all T:Rng.
2021-09-01 09:39:33 -04:00
Dario Nieuwenhuis
297de612e5 Improve executor naming. Add docs. 2021-08-31 23:59:28 +02:00
Bob McWhirter
fd7a76c59e Formatting. Always formatting. 2021-08-30 09:57:31 -04:00
Bob McWhirter
7fa3b27cac Move random utils to another trait. 2021-08-30 09:55:29 -04:00
Bob McWhirter
78f7d1b786 Add example using ranged RNG. 2021-08-27 16:10:50 -04:00
Dario Nieuwenhuis
c4b9c8ac87 std: fold into embassy core, add non-hacky time driver. 2021-08-25 21:06:27 +02:00
Dario Nieuwenhuis
3457bb9f05 nrf: make gpiote and time-driver optional via cargo features. 2021-08-20 15:42:42 +02:00
Dario Nieuwenhuis
17659e2e44 nrf/wdt: add handle steal 2021-08-20 14:23:24 +02:00
Dario Nieuwenhuis
0be6e4a384
Merge pull request #333 from bgamari/stm32g0
Add support for STM32G0
2021-08-20 01:35:02 +02:00
Ben Gamari
ee841499ee Add STM32G0 examples 2021-08-20 01:28:50 +02:00
Dario Nieuwenhuis
8e5f1f4b5e
Merge pull request #367 from embassy-rs/metapac-cleanup
stm32-metapac cleanups
2021-08-20 00:05:08 +02:00
Dario Nieuwenhuis
2c992f7010 stm32: move dbgmcu stuff to toplevel config setting, defaulting to true. 2021-08-19 23:50:19 +02:00
Dario Nieuwenhuis
9f51f9a170 stm32/wl: add stub APB3 to get it to build.
Completely untested.
2021-08-19 22:51:41 +02:00
Dario Nieuwenhuis
ec51880e28 stm32/exti: unify all versions into single impl 2021-08-19 22:17:17 +02:00
Dario Nieuwenhuis
daab542fc4 wl55: update to cortex-m-rt 0.7 2021-08-19 17:11:38 +02:00
Dario Nieuwenhuis
fe355af4f0 nrf: update to cortex-m-rt 0.7 2021-08-19 17:11:17 +02:00
Dario Nieuwenhuis
d3aeb45fb3 Update cortex-m-rt to v0.7 for stm32, rp. 2021-08-19 00:56:11 +02:00
Timo Kröger
dacf75d911 bxcan: Fix the flaky CAN example 2021-08-18 21:58:50 +02:00
Timo Kröger
191a589820 bxcan: namechange "bxcan_v1" -> "can_bxcan" 2021-08-18 21:58:50 +02:00
Timo Kröger
7c405250a7 CAN support with bxcan crate 2021-08-18 21:58:50 +02:00
Bob McWhirter
5fab514f02 Remove metapac from the Cargo.toml for h7. 2021-08-18 11:44:09 -04:00
Ulf Lilleengen
919cdfe8c4
Add STM32WL55 examples to CI (#361)
* Add STM32WL55 examples to CI and fix warnings
2021-08-18 09:35:08 +02:00
Ulf Lilleengen
4df63f5379 Add per-core EXTI support
* Generate a core index put into the PAC for the peripherals to use as
  index into registers.
* Add EXTI v2 which uses CORE_INDEX to index exti registers
2021-08-17 16:22:47 +02:00
Ulf Lilleengen
61409e2fb6 Add example for STM32WL55 2021-08-17 16:22:47 +02:00
Bob McWhirter
a93ed2bed6 Add H7 exti button example using correct EXTI reg block offsets. 2021-08-16 15:15:07 -04:00
Ulf Lilleengen
cbff0398bb
Add IRQ-driven buffered USART implementation for STM32 v2 usart (#356)
* Add IRQ-driven buffered USART implementation for STM32 v2 usart

* Implementation based on nRF UARTE, but simplified to not use DMA to
  avoid complex interaction between DMA and USART.
* Implementation of AsyncBufRead and AsyncWrite traits
* Some unit tests to ring buffer
* Update polyfill version
* Update sub module to get usart IRQ fix
2021-08-16 17:16:49 +02:00
Dario Nieuwenhuis
2540a960e5 nrf: add WDT driver 2021-08-07 14:26:28 +02:00
Ben Gamari
e44acd0d56 stm32f4: Use unwrap! where possible 2021-08-05 22:39:59 +02:00
Ben Gamari
f4950c4449 examples: Consistently use unwrap! in favor of .unwrap()
Unfortunately errors from `embedded_graphics` and `core` doesn't provide
the necessary instances currently.
2021-08-05 22:39:59 +02:00
Dario Nieuwenhuis
b1d631d639 stm32/time: add Cargo features to choose tim2/tim3 2021-08-05 19:14:09 +02:00
Dario Nieuwenhuis
0ea6a2d890 time: replace dyn clock/alarm with a global Driver trait 2021-08-05 19:14:09 +02:00
Dario Nieuwenhuis
cfa1f61154
Merge pull request #344 from bobmcwhirter/remove_builders
Remove builders from Config(s) and examples.
2021-08-04 21:32:39 +02:00
Bob McWhirter
9726f77ce1 Grep fails me. 2021-08-04 15:28:08 -04:00
Bob McWhirter
97e4b89f82 Fmt giving me headaches. 2021-08-04 14:32:22 -04:00
Bob McWhirter
08e7e5a3fa Um. 2021-08-04 14:22:47 -04:00
Bob McWhirter
dc126b9ab6 Unused import. 2021-08-04 14:14:36 -04:00
Bob McWhirter
6fd8f6b79a Remove more extra vars. 2021-08-04 13:55:34 -04:00
Dario Nieuwenhuis
07d4b196f7 Update nightly, remove removed features. 2021-08-04 19:48:14 +02:00
Bob McWhirter
f91bfef799 Formatting again. 2021-08-04 13:42:06 -04:00
Bob McWhirter
f4971fbb79 Further work sharing config for example and removing duplicated code. 2021-08-04 13:39:02 -04:00
Bob McWhirter
4fe9114695 Remove unused import. 2021-08-04 11:40:47 -04:00
Bob McWhirter
0787c8f8f5 Formatting. 2021-08-04 11:35:18 -04:00
Bob McWhirter
03f15d3a60 Remove builders from Config(s) and examples. 2021-08-04 11:32:39 -04:00
Dario Nieuwenhuis
a1a5acb825 rustfmt everything 2021-08-04 15:25:21 +02:00
Dario Nieuwenhuis
5d31dd328f
Merge pull request #341 from lulf/usart-dma-read
Add uart::Read DMA-based implementation
2021-08-04 11:02:15 +02:00
Ulf Lilleengen
0d02342b2d Rename bread -> read_blocking 2021-08-04 08:34:30 +02:00
Bob McWhirter
3e6aceaaa7 Run cargo-fmt on the h7 examples. 2021-08-03 14:31:41 -04:00
Bob McWhirter
88c11a653c Formatting fixes. 2021-08-03 14:12:11 -04:00
Bob McWhirter
d7409d63e8 Enhance Rcc configuration to be more fluentish.
Clean up H7 examples to remove all vegan HALs and PACs.
2021-08-03 13:57:18 -04:00
Ulf Lilleengen
6ff0614cb6 Add uart::Read DMA-based implementation
* Rename existing read() to bread() (blocking)
2021-08-03 15:31:24 +02:00
Dario Nieuwenhuis
63ac7ac799 Mark news as unsafe due to not being leak-safe. 2021-08-02 19:55:04 +02:00
Dario Nieuwenhuis
af87031d62 hal-common: remove Pin in PeripheralMutex 2021-08-02 19:55:04 +02:00
Bob McWhirter
63b32b39e1 Use an em bikeshed instead of an underscore bikeshed. 2021-08-02 13:29:06 -04:00
Bob McWhirter
5f9447abb4 Put the implicit memory.x behind a memory_x feature on embassy-stm32. 2021-08-02 13:21:30 -04:00
Bob McWhirter
f6c5f039c8 Emit a default memory.x alongside device.x from metapac. 2021-08-02 11:23:55 -04:00
Ben Gamari
3420cbf744 examples: Drop build-std = ["core"]
Previously the cargo configurations of all of the example projects had
`build-std = ["core"]`, which forces compilation of `core` as a
code-size optimisation. However, this is strictly unnecessary and will
currently break for users who do not use `rustup` directly (e.g. nix
users).
2021-07-31 13:01:15 -04:00
Dario Nieuwenhuis
3835278567
Merge pull request #321 from thalesfragoso/f4-pll
F4 PLL
2021-07-31 11:08:46 +02:00
Thales Fragoso
5cfb9adad8 f4-pll: Add max values per chip 2021-07-29 18:43:15 -03:00
Thales Fragoso
e7714983b3 f4-rcc: Add option to enable debug_wfe and add hello example 2021-07-29 18:43:15 -03:00
Timo Kröger
895781d0d1 stm32l4: Fix examples crate name 2021-07-29 18:14:01 +02:00
Timo Kröger
cad43587e6 stm32l0: Use embassy::main for examples 2021-07-29 17:37:32 +02:00
Timo Kröger
4ccac69929 stm32l4: Cleanup examples
* Use `cortex_m_rt::entry` for sync examples
* Use `Dbgmcu::enable_all()` everywhere
2021-07-29 15:54:11 +02:00
Timo Kröger
2a4890165d stm32f0: Enable debug access in low power modes 2021-07-29 15:35:23 +02:00
Dario Nieuwenhuis
7bfb763e09 Rename embassy-extras to embassy-hal-common 2021-07-29 13:44:51 +02:00
Timo Kröger
dd1ec8ebec Use embassy::main macro for stm32f4 examples 2021-07-27 15:03:18 +02:00
Dario Nieuwenhuis
5b0ae5c25b stm32/examples: cleanup L4 2021-07-24 13:57:11 +02:00
Timo Kröger
06fb2a7a80 Enable SYSCFG clock in exti::init() 2021-07-24 11:13:49 +02:00
Bob McWhirter
67283c0cbd Reset back the memory.x also. 2021-07-23 13:22:39 -04:00
Bob McWhirter
a63847944f Reset the examples to the original F4 flavor. 2021-07-23 13:22:39 -04:00
Bob McWhirter
b07325b476 Enable DMA for SPIv1 on F4's etc. 2021-07-23 13:22:39 -04:00
Bob McWhirter
a1dac21bdf Make SPIv3 work with DMA.
Add both DMA and non-DMA example to H7.
2021-07-23 13:22:39 -04:00
Bob McWhirter
34dfe28d3a FFS warnings about unused Result<>. 2021-07-23 13:22:39 -04:00
Bob McWhirter
053e330375 Fix warnings about un-used variables. 2021-07-23 13:22:39 -04:00
Bob McWhirter
e269971597 Fix extraneous mut warnings in L4 example. 2021-07-23 13:22:39 -04:00
Bob McWhirter
638235e72d Fix up the L0 example for SPI. 2021-07-23 13:22:39 -04:00
Bob McWhirter
bee7f60f08 Improve the SPIv2 DMA example to verify it actually works. 2021-07-23 13:22:39 -04:00
Bob McWhirter
0d2051243e SPIv2 + DMA. 2021-07-23 13:22:39 -04:00
Timo Kröger
57eecd4292 Use Dbgmcu::enable_all() in stm32f4 examples 2021-07-23 17:54:14 +02:00
Timo Kröger
5ac91933ff stm32: No need to enable GPIO clocks manually 2021-07-23 17:54:13 +02:00
Bob McWhirter
13873df30b Auto-enable all GPIOs during init(). 2021-07-23 11:32:19 -04:00
Bob McWhirter
d68f2617e6 Add a Dbgmcu struct capable of enabling all relevant DBGMCU.cr fields.
Includes the addition of a `dbgmcu!(...)` macro table which currently takes
the form of

	(cr, $fn_name:ident)

where `$fn_name` is something like `set_dbgsleep_d1` etc.

The method is unsafe, since it's performing unsafe PAC operations.

Two examples modified to demonstrate its usage.
2021-07-22 14:18:48 -04:00
Dario Nieuwenhuis
3655ceff27
Merge pull request #308 from timokroeger/stmf4-example-cleanup
Cleanup stm32f4 examples
2021-07-21 23:21:28 +02:00
Timo Kröger
5e998d1a6c Cleanup stm32f4 examples
* Remove dependency on stm32f4 pac crate
* Remove unused `ZeroClock`
2021-07-21 23:12:36 +02:00
Dario Nieuwenhuis
25b870d811
Merge pull request #302 from embassy-rs/rp-spi-fixes
Rp spi fixes
2021-07-20 10:11:58 +02:00
Dario Nieuwenhuis
451e342961 rp/examples: add spi_display example 2021-07-20 10:06:57 +02:00
Dario Nieuwenhuis
b04dc7e783
Merge pull request #226 from huntc/mpsc
Multi Producer Single Consumer channel
2021-07-20 08:01:42 +02:00
Dario Nieuwenhuis
1799938187 rp/examples: add spi example 2021-07-19 23:54:18 +02:00
Dario Nieuwenhuis
d7176da37c stm32/examples: update DMA channel names 2021-07-17 08:04:33 +02:00
Bob McWhirter
0119ea809d Get DMA on H7 working, add usart_dma example for H7. 2021-07-16 14:41:20 -04:00
Dario Nieuwenhuis
63a0e188ea stm32/dma: fix h7 impls 2021-07-16 14:41:20 -04:00
Dario Nieuwenhuis
3d1391ef2d stm32/dma: impl all variants 2021-07-16 14:41:20 -04:00
Thales Fragoso
697f93ad42 stm32: Add F0 example 2021-07-15 13:50:39 -03:00
huntc
3778f55d80 Provides a cleaner construction of the channel with the common "new" naming 2021-07-15 12:31:53 +10:00
huntc
f159beec1c Use of a NoopMutex 2021-07-15 12:31:52 +10:00
huntc
5f87c7808c Remove the cell and trait
At the expense of exposing the channel types again. We do this as we want to avoid using dyn traits given their overhead for embedded environments.
2021-07-15 12:31:52 +10:00
huntc
ae62948d6c Replace UnsafeCell
Using a new ChannelCell so that there's no leaking of the abstraction
2021-07-15 12:31:52 +10:00
huntc
816b78c0d9 Reduces the types on sender and receiver
In exchange for an UnsafeCell being passed into split
2021-07-15 12:31:52 +10:00
huntc
1b9d5e5071 Multi Producer Single Consumer channel
An MPSC inspired by Tokio and Crossbeam. The MPSC is designed to support both single and multi core processors, with only single core implemented at this time. The allocation of the channel’s buffer is inspired by the const generic parameters that Heapless provides.
2021-07-15 12:31:52 +10:00
Dario Nieuwenhuis
71c8d7aa7d stm32l4/examples: remove old-pac uses. 2021-07-15 00:37:00 +02:00
Bob McWhirter
21e94972dc Fix more warnings and examples. 2021-07-14 14:55:20 -04:00
Bob McWhirter
3fd9023fce Fix the h7 example. 2021-07-14 14:45:54 -04:00
Bob McWhirter
a88f0028ef First shot at async dma usart for stm32. 2021-07-14 14:14:14 -04:00
Bob McWhirter
f01ddd5f5c Mix dmamux into bdma_v1. 2021-07-13 10:09:35 -04:00
Bob McWhirter
043f0ea508 Checkpoint DMAMUX channel setup. 2021-07-13 10:08:43 -04:00
Dario Nieuwenhuis
7547c8d8d6 rp/timer: add 2021-07-12 03:45:57 +02:00
Dario Nieuwenhuis
ecc151d4e2 stm32/adc: simplify delay handling 2021-07-05 03:18:23 +02:00
Dario Nieuwenhuis
3ce32d6624
Merge pull request #273 from rukai/fix_warnings_again
fix stm32 warnings
2021-07-05 02:00:51 +02:00
Rukai
25d4b2ea26 fix stm32 warnings 2021-07-05 01:54:29 +02:00
Rukai
56d0c5ffe1 Fix warnings in std and rp 2021-07-04 12:46:04 +10:00
Bob McWhirter
0920c0cb1d Make UART pins Rx/Tx/etc in addition to USART. 2021-07-01 11:30:54 -04:00
Bob McWhirter
54ada5bae1 Stub in the DMA bits that aren't yet there. 2021-07-01 11:30:54 -04:00
Bob McWhirter
f83559c6ab Add L4+ example for USART. 2021-07-01 11:30:54 -04:00
Dario Nieuwenhuis
e55c89f890
Merge pull request #262 from Liamolucko/nrf-rng
Add an nRF RNG driver
2021-07-01 01:55:55 +02:00
Liam Murphy
a64dec517c Update RNG example 2021-06-30 12:55:30 +10:00
Bob McWhirter
d5fb558005 Fix non-DMA USART example. 2021-06-29 13:08:18 -04:00
Bob McWhirter
24f18819c8 Adjust example for RCC and DMA. 2021-06-29 11:01:57 -04:00
Liam Murphy
8a4ab29819 Add an nRF RNG driver
Resolves #187

Like the stm32 driver, this has both a non-blocking and blocking API, and implements `rand_core::RngCore` for the blocking API.
2021-06-29 17:26:16 +10:00
Dario Nieuwenhuis
cdb0c72849
Merge pull request #255 from thalesfragoso/od-pin
stm32: Allow for open drain configuration for output pin
2021-06-27 19:29:18 +02:00
Thales Fragoso
0eaadfc125 stm32: Update gpio examples 2021-06-25 18:16:43 -03:00
Dario Nieuwenhuis
c7c897bb72 rp/gpio: add infallible inherent methods 2021-06-25 06:24:14 +02:00
Dario Nieuwenhuis
5a6384d199 rp: clock setup 2021-06-25 03:38:21 +02:00
Thales Fragoso
aca0fb1065 net: Make the user pass in the StackResources in init
By having the user pass in the resources, we can make them generic, this way
the user can choose the size of the individual resources
2021-06-20 17:15:18 -03:00
Thales Fragoso
098ce6e740 stm32h7: Add ethernet example 2021-06-16 16:48:35 +02:00
Ulf Lilleengen
b6a8703698 Add support for generating PAC for dual cores
* Chips that have multiple cores will be exposed as chipname_corename,
  i.e. stm32wl55jc_cm4
* Chips that have single cores will use the chip family as feature name
  and pick the first and only core from the list
* Add support for stm32wl55 chip family
2021-06-16 15:12:07 +02:00
Bob McWhirter
d58fb11b2e ADCv3 and example. 2021-06-14 13:20:42 -04:00
Ulf Lilleengen
95532726b2 Add minimal RCC impls for L4 and F4 2021-06-14 11:33:11 +02:00
Dario Nieuwenhuis
97e2f10665
Merge pull request #242 from Tiwalun/stm32wb55-metapac
Initial support and example for STM32WB55
2021-06-12 16:33:40 +02:00
Dominik Boehi
b82e2627aa Add STM32WB55 examples to CI, fix example crate name 2021-06-12 07:06:42 +02:00
Dominik Boehi
0eab96f573 Initial support and example for STM32WB55 2021-06-12 07:06:36 +02:00
Dario Nieuwenhuis
890e93f367 UPdate smoltcp 2021-06-12 00:50:36 +02:00
Ulf Lilleengen
1bb7123156 Add examples for STM32L0 2021-06-09 23:09:48 +02:00
Bob McWhirter
6295589467 Bring over DAC example (relies upon stm32-data update) 2021-06-08 15:25:38 -04:00
Bob McWhirter
4f1f63f336 Initial swag at h7 examples. 2021-06-08 15:25:38 -04:00
Bob McWhirter
ecd53c916c Small changes to support DAC example. 2021-06-08 14:04:56 -04:00
Bob McWhirter
cf3c021c37 Initial examples for STM32L4+ 2021-06-08 10:37:11 -04:00
Bob McWhirter
b8690e5f5d Add blinky example. 2021-06-08 10:37:11 -04:00
Rukai
010b2b9497 Fix stm32 warnings 2021-06-06 00:46:20 +10:00
Dario Nieuwenhuis
7d869bdec8 Update heapless 2021-06-04 01:35:04 +02:00
Dario Nieuwenhuis
dff03ecfc7 Move examples to a subdirectory 2021-06-02 01:32:19 +02:00
Dario Nieuwenhuis
20d3dc87f9 Rename examples -> embassy-nrf-examples 2021-01-01 22:46:32 +01:00
Timo Kröger
6695bf0f21 Low power UART driver 2020-12-30 19:24:12 +01:00
Dario Nieuwenhuis
015b6bbce4 Ensure timers always yield at least once.
This prevents a task that's constantly running late from monopolizing the CPU.
Add executor_fairness_test example showcasing it.
2020-12-30 00:57:35 +01:00
Dario Nieuwenhuis
af5454fbfe Update drivers to owned irqs. 2020-12-29 01:53:17 +01:00
Dario Nieuwenhuis
4b8d8ba87e Update RTC for owned irqs 2020-12-29 01:05:28 +01:00
Dario Nieuwenhuis
0750234fbe WIP owned irqs 2020-12-29 00:05:52 +01:00
Dario Nieuwenhuis
267ec334ac Rename Uarte -> BufferedUarte 2020-12-28 23:57:50 +01:00
Dario Nieuwenhuis
692d8bb813 More efficient timer queue, integrated into Executor directly. 2020-12-26 23:44:53 +01:00
Dario Nieuwenhuis
80c504cd95 Add std impl for rand 2020-12-14 00:36:29 +01:00
Dario Nieuwenhuis
6f76c0ebcc Add support for log+defmt again, but better. 2020-12-01 17:46:56 +01:00
Dario Nieuwenhuis
78135a81d9 Remove anyfmt 2020-11-27 18:42:59 +01:00
Dario Nieuwenhuis
2e062f5627 gpiote: change port api to directly return futures. 2020-11-09 01:04:34 +01:00
Dario Nieuwenhuis
36517fd1c5 Add gpiote port example. 2020-11-08 19:00:08 +01:00
Dario Nieuwenhuis
def225b982 gpiote: better naming 2020-11-08 17:38:45 +01:00
Dario Nieuwenhuis
5e8608c7a5 Make defmt optional with new anyfmt crate 2020-11-01 17:17:24 +01:00
Dario Nieuwenhuis
2684bf605a update multiprio example. 2020-10-31 22:45:35 +01:00
Dario Nieuwenhuis
b3858441f7 Update examples. 2020-10-31 22:37:24 +01:00
Dario Nieuwenhuis
cd9ecaef57 integrate static-executor, cleanup time module. 2020-10-19 21:25:54 +02:00
Dario Nieuwenhuis
c81d626254 gpiote: take borrow instead of owned pin.
This makes it possible to read the pin while the channel is created.
2020-09-29 04:17:32 +02:00
Dario Nieuwenhuis
68eac3a57c Add multi-priority executor example. 2020-09-26 00:36:02 +02:00
Dario Nieuwenhuis
f88f233e39 Remove executor model (it's not a nice enough abstraction). 2020-09-25 23:42:49 +02:00
Dario Nieuwenhuis
19a89b5c14 Add Clock trait 2020-09-25 23:38:42 +02:00
Dario Nieuwenhuis
cf1d604749 Add support for multi alarm to RTC. 2020-09-25 23:25:49 +02:00
Dario Nieuwenhuis
4333105341 Add Executor with timer queue, Timer, Instant, Duration, Alarm. 2020-09-25 03:25:06 +02:00
Dario Nieuwenhuis
05ca563e7d Add clock::Monotonic trait. 2020-09-24 23:26:24 +02:00
Dario Nieuwenhuis
afcf725519 Add rtc_async example 2020-09-24 22:46:00 +02:00
Dario Nieuwenhuis
82e5e3c45f rtc: Add alarm callback. 2020-09-24 22:41:52 +02:00
Dario Nieuwenhuis
f8d63b1f30 Update to static-executor "multi" 2020-09-24 22:04:45 +02:00
Dario Nieuwenhuis
3b39ab07e5 Add 64-bit rtc driver with alarm support. 2020-09-24 19:59:20 +02:00
Dario Nieuwenhuis
4e4241bf90 remove nrf prefix in features, for consistency with nrf-hal 2020-09-24 19:56:47 +02:00
Dario Nieuwenhuis
f9e2cef7f2 Add GPIOTE async hal. 2020-09-23 00:32:49 +02:00
Dario Nieuwenhuis
9a57deef9b First commit 2020-09-22 18:03:43 +02:00