Adam Greig
c83552eadc
stm32: fix DAC examples
...
The DAC driver defaults to enabling the channel trigger, but leaves it
at the default value of TIM6 TRGO, then performs a software trigger
after writing the new output value. We could change the trigger
selection to software trigger, but for this example it's simpler to just
disable the trigger.
2023-07-22 12:57:49 +01:00
Mathias
60b2f075dc
Merge branch 'main' of https://github.com/embassy-rs/embassy into embassy-stm32/rcc-rtc-l4
2023-07-03 19:33:26 +02:00
Mathias
d372df7ddb
L4: Switch to MSI to prevent problems with PLL configuration, and enable power to AHB bus clock to allow RTC to run
2023-07-01 12:16:23 +02:00
Dario Nieuwenhuis
6eb46c419c
Merge pull request #1565 from JuliDi/main
...
Implement DMA for DAC on STM32
2023-06-29 08:54:28 +00:00
JuliDi
d5898c11eb
remove need for StaticCell in dac_dma example for stm32l4
2023-06-28 16:40:50 +02:00
JuliDi
02f367f733
attempt at fixing ci
2023-06-28 15:28:10 +02:00
JuliDi
f2e7a23148
attempt at fixing ci
2023-06-28 15:25:57 +02:00
JuliDi
27a89019ad
add doc
2023-06-28 15:21:24 +02:00
JuliDi
91c31d5e43
Update DAC examples, add DAC + DMA example
2023-06-28 11:58:25 +02:00
Dario Nieuwenhuis
219ef5b37a
stm32/otg: add VBUS detection.
...
Fixes #1442 .
2023-06-27 12:52:37 +02:00
Dario Nieuwenhuis
558918651e
stm32: update stm32-metapac.
2023-06-19 03:22:12 +02:00
xoviat
316be179af
stm32: move to bind_interrupts
...
disable lora functionality for now
2023-05-24 17:29:56 -05:00
Dirk Stolle
0584312ef0
Fix some typos
2023-05-08 23:25:01 +02:00
Mathieu Dupont
4ce1c5f27d
Add MCO support for L4 and F4 families
2023-04-03 16:41:25 +02:00
Dario Nieuwenhuis
b2c6dc45e3
Fix examples broken by the macro fix.
2023-03-08 09:17:01 +01:00
Dario Nieuwenhuis
3af991ab63
usb: unify ControlHandler+DeviceStateHandler, route all control requests to all handlers.
...
- Allows classes to handle vendor requests.
- Allows classes to use a single handler for multiple interfaces.
- Allows classes to access the other events (previously only `reset` was available).
2023-02-08 00:17:08 +01:00
chemicstry
1af102a1aa
stm32 otg: add examples.
2023-01-11 17:58:15 +01:00
Guillaume MICHEL
9cac649fcf
stm32: Add support for read_until_idle on UART
2022-10-26 19:06:18 +02:00
Dario Nieuwenhuis
5daa173ce4
Split embassy-time from embassy-executor.
2022-08-18 01:22:30 +02:00
Dario Nieuwenhuis
2e85eaf7d5
examples Remove the fn config()
idiom.
...
It was only useful for doing #[embassy_executor::main(config = "config()")]`. Now that
it's gone, it makes more sense to build the config in main directly.
2022-08-17 22:25:58 +02:00
Dario Nieuwenhuis
fc6e1e06b3
Remove HAL initialization from #[embassy::main] macro.
2022-08-17 22:16:46 +02:00
chemicstry
6498324b58
Implement I2C pullup configuration
2022-08-09 22:13:35 +03:00
Dario Nieuwenhuis
a0f1b0ee01
Split embassy crate into embassy-executor, embassy-util.
2022-07-29 23:40:36 +02:00
Dario Nieuwenhuis
a8703b7598
Run rustfmt.
2022-06-12 22:22:31 +02:00
Henrik Alsér
e10fc2bada
Async shared bus for SPI & I2C + rename embassy-traits ( #769 )
...
* Rename embassy-traits to embassy-embedded-hal
* Rename embassy-traits to embassy-embedded-hal
* Add shared bus for SPI and I2C
* rustfmt
* EHA alpha 1
* Rename embedded-traits in examples
* rustfmt
* rustfmt
Co-authored-by: Henrik Alsér <henrik@mindbite.se>
2022-05-26 18:54:58 +02:00
Dario Nieuwenhuis
fc32b3750c
Remove embassy_hal_common::usb.
...
The replacement is `embassy-usb`. There's a WIP driver for stm32 USBD in #709 ,
there's no WIP driver for stm32 USB_OTG. This means we're left without
USB_OTG support for now.
Reason for removing is I'm going to soon remove `embassy::io`, and
USB uses it. I don't want to spend time maintaining "dead" code
that is going to be removed. Volunteers welcome, either to update
old USB to the new IO, or write a USB_OTG driver fo the new USB.
2022-05-04 01:41:37 +02:00
Dario Nieuwenhuis
3251a21fb7
Switch to crates.io embedded-hal, embedded-hal-async.
...
This temporarily removes support for the async UART trait, since it's
not yet in embedded-hal-async.
2022-04-22 19:58:24 +02:00
Philip A Reimer
8f6fccf012
fix clock in l4 rng example
2022-04-11 21:06:22 -06:00
Philip A Reimer
d8860c0b80
add stm32l4 hsi48 and usb example
2022-04-09 14:55:03 -06:00
Dario Nieuwenhuis
82803bffda
Use embassy/defmt-timestamp-uptime in all examples.
2022-04-02 04:35:06 +02:00
Dario Nieuwenhuis
9bad9365dc
Update rust nightly, embedded-hal 1.0, embedded-hal-async.
2022-03-11 00:38:07 +01:00
Grant Miller
ed84d753c7
Update examples
2022-03-08 17:12:50 -06:00
Dario Nieuwenhuis
550da471be
stm32: Remove OptionalPin
...
The idea behind OptionalPin has a few problems:
- you need to impl the signal traits for NoPin which is a bit weird https://github.com/embassy-rs/embassy/blob/master/embassy-stm32/src/dcmi.rs#L413-L416
- you can pass any combination of set/unset pins, which needs checking at runtime https://github.com/embassy-rs/embassy/blob/master/embassy-stm32/src/dcmi.rs#L130
The replacement is to do multiple `new` constructors for each combination of pins you want to take.
2022-02-10 02:38:10 +01:00
Dario Nieuwenhuis
0719b05d63
traits: migrate Delay to embedded-hal 1.0+async, remove Rng and Flash.
2022-01-27 00:08:02 +01:00
Ulf Lilleengen
4032fc0655
Support unstable-trait feature for stm32
2022-01-26 22:39:06 +01:00
Dario Nieuwenhuis
889d757ab8
stm32/spi: expose all functionality as inherent methods.
2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
97ab859f00
stm32/i2c: expose all functionality as inherent methods.
2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
c949519714
stm32/usart: expose all functionality as inherent methods.
2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
b526addf7b
stm32/exti: expose all functionality as inherent methods.
2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
58fc64722c
stm32/gpio: expose all functionality as inherent methods.
2022-01-19 17:59:55 +01:00
Dario Nieuwenhuis
cdc66e110f
stm32/rcc: remove builders on Config.
...
This makes API consistent with other Config structs in Embassy, where
the convention is to not use builders.
2022-01-04 13:31:30 +01:00
Ulf Lilleengen
3811c0a401
Add adapter for implementing async traits for blocking types
...
This allows writing drivers relying on async traits, while still
functioning with implementations that already implement the embedded-hal
traits.
Add examples to stm32l4 for using this feature.
2021-12-17 12:54:51 +01:00
bors[bot]
01e5376b25
Merge #456
...
456: Fix L4 clock setup for MSI and PLL to allow RNG operation r=Dirbaio a=lulf
Example is tested on STM32L475VG.
Co-authored-by: Ulf Lilleengen <lulf@redhat.com>
2021-10-26 11:59:14 +00:00
Ulf Lilleengen
e55726964d
Fix clock setup for MSI and PLL to allow RNG opereation
...
Add RNG example using PLL as clock source.
2021-10-26 13:45:53 +02:00
Ulf Lilleengen
f8ebc967a9
Add implementation of async trait for STM32 I2C v2
...
* Add DMA read implementation for I2C v2
* Add example using DMA for I2C
2021-10-21 12:30:02 +02:00
Ulf Lilleengen
9e461b771a
Add i2c example for L4
2021-10-20 10:11:34 +02:00
Dario Nieuwenhuis
de016e8456
Remove trait_alias, allow(incomplete_features).
...
trait_alias seems unused. no idea why it's there.
2021-09-03 17:00:58 +02:00
Dario Nieuwenhuis
2c992f7010
stm32: move dbgmcu stuff to toplevel config setting, defaulting to true.
2021-08-19 23:50:19 +02:00
Ben Gamari
f4950c4449
examples: Consistently use unwrap! in favor of .unwrap()
...
Unfortunately errors from `embedded_graphics` and `core` doesn't provide
the necessary instances currently.
2021-08-05 22:39:59 +02:00
Dario Nieuwenhuis
0ea6a2d890
time: replace dyn clock/alarm with a global Driver trait
2021-08-05 19:14:09 +02:00