# SPE ADIN1110 `embassy-net` integration

[`embassy-net`](https://crates.io/crates/embassy-net) integration for the `Analog ADIN1110` SPI SPE ethernet chips.

## What is SPE or Single Pair Ethernet / 10 BASE-T1L

SPE is Single Pair Ethernet, what the names implies, it uses a single twisted/differancial pair (only 2 wires) to transmit ethernet packet in full-duplex.
SPE is still ethernet, only the phissical layer is different.

SPE also supports [`PoDL(Power over Data Line)`](https://www.ti.com/lit/an/snla395/snla395.pdf), power delivery from 0.5 up to 50 Watts, similair to [`PoE`](https://en.wikipedia.org/wiki/Power_over_Ethernet), but additional hardware and handshake protocol is needed.

SPE has many link speeds but only `10 BASE-T1L` is able to reach cable length up to 1000 meters in `2.4 Vpp` transmit amplitude.
Currently in 2023, none of the standards are compatiable with eachother.
So `10 BASE-T1L` don't work with a `10 BASE-T1S` or `100 BASE-T1`.

In the industry SPE is also called [`APL(Advanced Physical Layer)`](https://www.ethernet-apl.org), it is based on the `10 BASE-T1L` standard.

APL can be use in [`intrinsic safety applications/explosion hazardous areas`](https://en.wikipedia.org/wiki/Electrical_equipment_in_hazardous_areas) which has it's own name and standard [`2-WISE(2-wire intrinsically safe ethernet) IEC TS 60079-47:2021`](https://webstore.iec.ch/publication/64292).

`10 BASE-T1L` and `ADIN1110` are designed to support intrinsic safety applications. The power supply energy is fixed and PDoL is not supported.

## Supported SPI modes

`ADIN1110` supports two SPI modes. `Generic` and [`OPEN Alliance 10BASE-T1x MAC-PHY serial interface`](https://opensig.org/download/document/OPEN_Alliance_10BASET1x_MAC-PHY_Serial_Interface_V1.1.pdf)

Both modes support with and without additional CRC.
Currently only `Generic` SPI with or without CRC is supported.

*NOTE:* SPI Mode is selected by the hardware pins `SPI_CFG0` and `SPI_CFG1`. Software can't detect nor change the mode.

## Hardware

- Testen on [`Analog Devices EVAL-ADIN1110EBZ`](https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/eval-adin1110.html) with a `STM32L4S5QII3P`, see [`spe_adin1110_http_server`](../examples/stm32l4/src/bin/spe_adin1110_http_server.rs) example.
- [`SparkFun MicroMod Single Pair Ethernet Function Board`](https://www.sparkfun.com/products/19038) or [`SparkFun MicroMod Single Pair Ethernet Kit`](https://www.sparkfun.com/products/19628), the kit supports multiple microcontrollers, please check if get the right microcontroller that is supported by Embassy!

## Other SPE chips

* [`Analog ADIN2111`](https://www.analog.com/en/products/adin2111.html) 2 Port SPI version. Can work with this driver.
* [`Analog ADIN1100`](https://www.analog.com/en/products/adin1100.html) RGMII version.

## Testing

ADIN1110 library can tested on the host with a mock SPI driver

$ `cargo test --target x86_64-unknown-linux-gnu`

## License

This work is licensed under either of

- Apache License, Version 2.0 ([LICENSE-APACHE](LICENSE-APACHE) or
  http://www.apache.org/licenses/LICENSE-2.0)
- MIT license ([LICENSE-MIT](LICENSE-MIT) or http://opensource.org/licenses/MIT)

at your option.