#![no_std]
#![no_main]
#![feature(type_alias_impl_trait)]

use defmt::*;
use embassy_executor::Spawner;
use embassy_net::tcp::TcpSocket;
use embassy_net::{Ipv4Address, Stack, StackResources};
use embassy_stm32::eth::generic_smi::GenericSMI;
use embassy_stm32::eth::{Ethernet, PacketQueue};
use embassy_stm32::peripherals::ETH;
use embassy_stm32::rcc::{AHBPrescaler, APBPrescaler, Hse, HseMode, Pll, PllSource, Sysclk, VoltageScale};
use embassy_stm32::rng::Rng;
use embassy_stm32::time::Hertz;
use embassy_stm32::{bind_interrupts, eth, Config};
use embassy_time::{Duration, Timer};
use embedded_io::asynch::Write;
use rand_core::RngCore;
use static_cell::make_static;
use {defmt_rtt as _, panic_probe as _};
bind_interrupts!(struct Irqs {
    ETH => eth::InterruptHandler;
});

type Device = Ethernet<'static, ETH, GenericSMI>;

#[embassy_executor::task]
async fn net_task(stack: &'static Stack<Device>) -> ! {
    stack.run().await
}

#[embassy_executor::main]
async fn main(spawner: Spawner) -> ! {
    let mut config = Config::default();
    config.rcc.hsi = None;
    config.rcc.hsi48 = true; // needed for rng
    config.rcc.hse = Some(Hse {
        freq: Hertz(8_000_000),
        mode: HseMode::BypassDigital,
    });
    config.rcc.pll1 = Some(Pll {
        source: PllSource::Hse,
        prediv: 2,
        mul: 125,
        divp: Some(2),
        divq: Some(2),
        divr: None,
    });
    config.rcc.ahb_pre = AHBPrescaler::NotDivided;
    config.rcc.apb1_pre = APBPrescaler::NotDivided;
    config.rcc.apb2_pre = APBPrescaler::NotDivided;
    config.rcc.apb3_pre = APBPrescaler::NotDivided;
    config.rcc.sys = Sysclk::Pll1P;
    config.rcc.voltage_scale = VoltageScale::Scale0;
    let p = embassy_stm32::init(config);
    info!("Hello World!");

    // Generate random seed.
    let mut rng = Rng::new(p.RNG);
    let mut seed = [0; 8];
    rng.fill_bytes(&mut seed);
    let seed = u64::from_le_bytes(seed);

    let mac_addr = [0x00, 0x00, 0xDE, 0xAD, 0xBE, 0xEF];

    let device = Ethernet::new(
        make_static!(PacketQueue::<4, 4>::new()),
        p.ETH,
        Irqs,
        p.PA1,
        p.PA2,
        p.PC1,
        p.PA7,
        p.PC4,
        p.PC5,
        p.PG13,
        p.PB15,
        p.PG11,
        GenericSMI,
        mac_addr,
        0,
    );

    let config = embassy_net::Config::Dhcp(Default::default());
    //let config = embassy_net::Config::StaticV4(embassy_net::StaticConfigV4 {
    //    address: Ipv4Cidr::new(Ipv4Address::new(10, 42, 0, 61), 24),
    //    dns_servers: Vec::new(),
    //    gateway: Some(Ipv4Address::new(10, 42, 0, 1)),
    //});

    // Init network stack
    let stack = &*make_static!(Stack::new(
        device,
        config,
        make_static!(StackResources::<2>::new()),
        seed
    ));

    // Launch network task
    unwrap!(spawner.spawn(net_task(&stack)));

    info!("Network task initialized");

    // Then we can use it!
    let mut rx_buffer = [0; 1024];
    let mut tx_buffer = [0; 1024];

    loop {
        let mut socket = TcpSocket::new(&stack, &mut rx_buffer, &mut tx_buffer);

        socket.set_timeout(Some(embassy_time::Duration::from_secs(10)));

        let remote_endpoint = (Ipv4Address::new(10, 42, 0, 1), 8000);
        info!("connecting...");
        let r = socket.connect(remote_endpoint).await;
        if let Err(e) = r {
            info!("connect error: {:?}", e);
            Timer::after(Duration::from_secs(3)).await;
            continue;
        }
        info!("connected!");
        loop {
            let r = socket.write_all(b"Hello\n").await;
            if let Err(e) = r {
                info!("write error: {:?}", e);
                continue;
            }
            Timer::after(Duration::from_secs(1)).await;
        }
    }
}