#![no_std] #![no_main] #![feature(type_alias_impl_trait)] teleprobe_meta::target!(b"w5100s-evb-pico"); teleprobe_meta::timeout!(120); use defmt::*; use embassy_executor::Spawner; use embassy_net::{Stack, StackResources}; use embassy_net_wiznet::chip::W5100S; use embassy_net_wiznet::*; use embassy_rp::clocks::RoscRng; use embassy_rp::gpio::{Input, Level, Output, Pull}; use embassy_rp::peripherals::{PIN_17, PIN_20, PIN_21, SPI0}; use embassy_rp::spi::{Async, Config as SpiConfig, Spi}; use embassy_time::Delay; use embedded_hal_bus::spi::ExclusiveDevice; use rand::RngCore; use static_cell::make_static; use {defmt_rtt as _, panic_probe as _}; #[embassy_executor::task] async fn ethernet_task( runner: Runner< 'static, W5100S, ExclusiveDevice, Output<'static, PIN_17>, Delay>, Input<'static, PIN_21>, Output<'static, PIN_20>, >, ) -> ! { runner.run().await } #[embassy_executor::task] async fn net_task(stack: &'static Stack>) -> ! { stack.run().await } #[embassy_executor::main] async fn main(spawner: Spawner) { let p = embassy_rp::init(Default::default()); let mut rng = RoscRng; let mut spi_cfg = SpiConfig::default(); spi_cfg.frequency = 50_000_000; let (miso, mosi, clk) = (p.PIN_16, p.PIN_19, p.PIN_18); let spi = Spi::new(p.SPI0, clk, mosi, miso, p.DMA_CH0, p.DMA_CH1, spi_cfg); let cs = Output::new(p.PIN_17, Level::High); let w5500_int = Input::new(p.PIN_21, Pull::Up); let w5500_reset = Output::new(p.PIN_20, Level::High); let mac_addr = [0x02, 0x00, 0x00, 0x00, 0x00, 0x00]; let state = make_static!(State::<8, 8>::new()); let (device, runner) = embassy_net_wiznet::new( mac_addr, state, ExclusiveDevice::new(spi, cs, Delay), w5500_int, w5500_reset, ) .await; unwrap!(spawner.spawn(ethernet_task(runner))); // Generate random seed let seed = rng.next_u64(); // Init network stack let stack = &*make_static!(Stack::new( device, embassy_net::Config::dhcpv4(Default::default()), make_static!(StackResources::<2>::new()), seed )); // Launch network task unwrap!(spawner.spawn(net_task(&stack))); perf_client::run( stack, perf_client::Expected { down_kbps: 500, up_kbps: 500, updown_kbps: 300, }, ) .await; info!("Test OK"); cortex_m::asm::bkpt(); }