//! This example runs on the Raspberry Pi Pico with a Waveshare board containing a Semtech Sx1262 radio.
//! It demonstrates LoRaWAN join functionality.

#![no_std]
#![no_main]
#![macro_use]
#![feature(type_alias_impl_trait)]

use defmt::*;
use embassy_executor::Spawner;
use embassy_lora::iv::GenericSx126xInterfaceVariant;
use embassy_lora::LoraTimer;
use embassy_rp::gpio::{Input, Level, Output, Pin, Pull};
use embassy_rp::spi::{Config, Spi};
use embassy_time::Delay;
use lora_phy::mod_params::*;
use lora_phy::sx1261_2::SX1261_2;
use lora_phy::LoRa;
use lorawan::default_crypto::DefaultFactory as Crypto;
use lorawan_device::async_device::lora_radio::LoRaRadio;
use lorawan_device::async_device::{region, Device, JoinMode};
use lorawan_device::{AppEui, AppKey, DevEui};
use {defmt_rtt as _, panic_probe as _};

const LORAWAN_REGION: region::Region = region::Region::EU868; // warning: set this appropriately for the region

#[embassy_executor::main]
async fn main(_spawner: Spawner) {
    let p = embassy_rp::init(Default::default());

    let miso = p.PIN_12;
    let mosi = p.PIN_11;
    let clk = p.PIN_10;
    let spi = Spi::new(p.SPI1, clk, mosi, miso, p.DMA_CH0, p.DMA_CH1, Config::default());

    let nss = Output::new(p.PIN_3.degrade(), Level::High);
    let reset = Output::new(p.PIN_15.degrade(), Level::High);
    let dio1 = Input::new(p.PIN_20.degrade(), Pull::None);
    let busy = Input::new(p.PIN_2.degrade(), Pull::None);

    let iv = GenericSx126xInterfaceVariant::new(nss, reset, dio1, busy, None, None).unwrap();

    let lora = {
        match LoRa::new(SX1261_2::new(BoardType::RpPicoWaveshareSx1262, spi, iv), true, Delay).await {
            Ok(l) => l,
            Err(err) => {
                info!("Radio error = {}", err);
                return;
            }
        }
    };

    let radio = LoRaRadio::new(lora);
    let region: region::Configuration = region::Configuration::new(LORAWAN_REGION);
    let mut device: Device<_, Crypto, _, _> = Device::new(region, radio, LoraTimer::new(), embassy_rp::clocks::RoscRng);

    defmt::info!("Joining LoRaWAN network");

    // TODO: Adjust the EUI and Keys according to your network credentials
    match device
        .join(&JoinMode::OTAA {
            deveui: DevEui::from([0, 0, 0, 0, 0, 0, 0, 0]),
            appeui: AppEui::from([0, 0, 0, 0, 0, 0, 0, 0]),
            appkey: AppKey::from([0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]),
        })
        .await
    {
        Ok(()) => defmt::info!("LoRaWAN network joined"),
        Err(err) => {
            info!("Radio error = {}", err);
            return;
        }
    };
}