120 lines
4.0 KiB
Rust
120 lines
4.0 KiB
Rust
//! This example runs on the RAK4631 WisBlock, which has an nRF52840 MCU and Semtech Sx126x radio.
|
|
//! Other nrf/sx126x combinations may work with appropriate pin modifications.
|
|
//! It demonstrates LORA P2P receive functionality in conjunction with the lora_p2p_send example.
|
|
#![no_std]
|
|
#![no_main]
|
|
#![macro_use]
|
|
#![feature(type_alias_impl_trait)]
|
|
|
|
use defmt::*;
|
|
use embassy_executor::Spawner;
|
|
use embassy_lora::iv::GenericSx126xInterfaceVariant;
|
|
use embassy_nrf::gpio::{Input, Level, Output, OutputDrive, Pin as _, Pull};
|
|
use embassy_nrf::{bind_interrupts, peripherals, spim};
|
|
use embassy_time::{Delay, Timer};
|
|
use lora_phy::mod_params::*;
|
|
use lora_phy::sx1261_2::SX1261_2;
|
|
use lora_phy::LoRa;
|
|
use {defmt_rtt as _, panic_probe as _};
|
|
|
|
const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
|
|
|
|
bind_interrupts!(struct Irqs {
|
|
SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1 => spim::InterruptHandler<peripherals::TWISPI1>;
|
|
});
|
|
|
|
#[embassy_executor::main]
|
|
async fn main(_spawner: Spawner) {
|
|
let p = embassy_nrf::init(Default::default());
|
|
let mut spi_config = spim::Config::default();
|
|
spi_config.frequency = spim::Frequency::M16;
|
|
|
|
let spim = spim::Spim::new(p.TWISPI1, Irqs, p.P1_11, p.P1_13, p.P1_12, spi_config);
|
|
|
|
let nss = Output::new(p.P1_10.degrade(), Level::High, OutputDrive::Standard);
|
|
let reset = Output::new(p.P1_06.degrade(), Level::High, OutputDrive::Standard);
|
|
let dio1 = Input::new(p.P1_15.degrade(), Pull::Down);
|
|
let busy = Input::new(p.P1_14.degrade(), Pull::Down);
|
|
let rf_switch_rx = Output::new(p.P1_05.degrade(), Level::Low, OutputDrive::Standard);
|
|
let rf_switch_tx = Output::new(p.P1_07.degrade(), Level::Low, OutputDrive::Standard);
|
|
|
|
let iv =
|
|
GenericSx126xInterfaceVariant::new(nss, reset, dio1, busy, Some(rf_switch_rx), Some(rf_switch_tx)).unwrap();
|
|
|
|
let mut lora = {
|
|
match LoRa::new(SX1261_2::new(BoardType::Rak4631Sx1262, spim, iv), false, Delay).await {
|
|
Ok(l) => l,
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
}
|
|
};
|
|
|
|
let mut debug_indicator = Output::new(p.P1_03, Level::Low, OutputDrive::Standard);
|
|
let mut start_indicator = Output::new(p.P1_04, Level::Low, OutputDrive::Standard);
|
|
|
|
start_indicator.set_high();
|
|
Timer::after_secs(5).await;
|
|
start_indicator.set_low();
|
|
|
|
let mut receiving_buffer = [00u8; 100];
|
|
|
|
let mdltn_params = {
|
|
match lora.create_modulation_params(
|
|
SpreadingFactor::_10,
|
|
Bandwidth::_250KHz,
|
|
CodingRate::_4_8,
|
|
LORA_FREQUENCY_IN_HZ,
|
|
) {
|
|
Ok(mp) => mp,
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
}
|
|
};
|
|
|
|
let rx_pkt_params = {
|
|
match lora.create_rx_packet_params(4, false, receiving_buffer.len() as u8, true, false, &mdltn_params) {
|
|
Ok(pp) => pp,
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
}
|
|
};
|
|
|
|
match lora
|
|
.prepare_for_rx(&mdltn_params, &rx_pkt_params, None, None, false)
|
|
.await
|
|
{
|
|
Ok(()) => {}
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
};
|
|
|
|
loop {
|
|
receiving_buffer = [00u8; 100];
|
|
match lora.rx(&rx_pkt_params, &mut receiving_buffer).await {
|
|
Ok((received_len, _rx_pkt_status)) => {
|
|
if (received_len == 3)
|
|
&& (receiving_buffer[0] == 0x01u8)
|
|
&& (receiving_buffer[1] == 0x02u8)
|
|
&& (receiving_buffer[2] == 0x03u8)
|
|
{
|
|
info!("rx successful");
|
|
debug_indicator.set_high();
|
|
Timer::after_secs(5).await;
|
|
debug_indicator.set_low();
|
|
} else {
|
|
info!("rx unknown packet");
|
|
}
|
|
}
|
|
Err(err) => info!("rx unsuccessful = {}", err),
|
|
}
|
|
}
|
|
}
|