86 lines
3.0 KiB
Rust
86 lines
3.0 KiB
Rust
//! This example runs on the STM32 LoRa Discovery board, which has a builtin Semtech Sx1276 radio.
|
|
//! It demonstrates LoRaWAN join functionality.
|
|
#![no_std]
|
|
#![no_main]
|
|
#![macro_use]
|
|
#![feature(type_alias_impl_trait)]
|
|
|
|
use defmt::*;
|
|
use embassy_executor::Spawner;
|
|
use embassy_lora::iv::Stm32l0InterfaceVariant;
|
|
use embassy_lora::LoraTimer;
|
|
use embassy_stm32::exti::{Channel, ExtiInput};
|
|
use embassy_stm32::gpio::{Input, Level, Output, Pin, Pull, Speed};
|
|
use embassy_stm32::rng::Rng;
|
|
use embassy_stm32::time::khz;
|
|
use embassy_stm32::{bind_interrupts, peripherals, rng, spi};
|
|
use embassy_time::Delay;
|
|
use lora_phy::mod_params::*;
|
|
use lora_phy::sx1276_7_8_9::SX1276_7_8_9;
|
|
use lora_phy::LoRa;
|
|
use lorawan::default_crypto::DefaultFactory as Crypto;
|
|
use lorawan_device::async_device::lora_radio::LoRaRadio;
|
|
use lorawan_device::async_device::{region, Device, JoinMode};
|
|
use lorawan_device::{AppEui, AppKey, DevEui};
|
|
use {defmt_rtt as _, panic_probe as _};
|
|
|
|
bind_interrupts!(struct Irqs {
|
|
RNG_LPUART1 => rng::InterruptHandler<peripherals::RNG>;
|
|
});
|
|
|
|
const LORAWAN_REGION: region::Region = region::Region::EU868; // warning: set this appropriately for the region
|
|
|
|
#[embassy_executor::main]
|
|
async fn main(_spawner: Spawner) {
|
|
let mut config = embassy_stm32::Config::default();
|
|
config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSI16;
|
|
config.rcc.enable_hsi48 = true;
|
|
let p = embassy_stm32::init(config);
|
|
|
|
let mut spi_config = spi::Config::default();
|
|
spi_config.frequency = khz(200);
|
|
|
|
// SPI for sx1276
|
|
let spi = spi::Spi::new(p.SPI1, p.PB3, p.PA7, p.PA6, p.DMA1_CH3, p.DMA1_CH2, spi_config);
|
|
|
|
let nss = Output::new(p.PA15.degrade(), Level::High, Speed::Low);
|
|
let reset = Output::new(p.PC0.degrade(), Level::High, Speed::Low);
|
|
|
|
let irq_pin = Input::new(p.PB4.degrade(), Pull::Up);
|
|
let irq = ExtiInput::new(irq_pin, p.EXTI4.degrade());
|
|
|
|
let iv = Stm32l0InterfaceVariant::new(nss, reset, irq, None, None).unwrap();
|
|
|
|
let lora = {
|
|
match LoRa::new(SX1276_7_8_9::new(BoardType::Stm32l0Sx1276, spi, iv), true, Delay).await {
|
|
Ok(l) => l,
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
}
|
|
};
|
|
|
|
let radio = LoRaRadio::new(lora);
|
|
let region: region::Configuration = region::Configuration::new(LORAWAN_REGION);
|
|
let mut device: Device<_, Crypto, _, _> = Device::new(region, radio, LoraTimer::new(), Rng::new(p.RNG, Irqs));
|
|
|
|
defmt::info!("Joining LoRaWAN network");
|
|
|
|
// TODO: Adjust the EUI and Keys according to your network credentials
|
|
match device
|
|
.join(&JoinMode::OTAA {
|
|
deveui: DevEui::from([0, 0, 0, 0, 0, 0, 0, 0]),
|
|
appeui: AppEui::from([0, 0, 0, 0, 0, 0, 0, 0]),
|
|
appkey: AppKey::from([0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]),
|
|
})
|
|
.await
|
|
{
|
|
Ok(()) => defmt::info!("LoRaWAN network joined"),
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
};
|
|
}
|