embassy/embassy-stm32/src/time_driver.rs
Dario Nieuwenhuis a8703b7598 Run rustfmt.
2022-06-12 22:22:31 +02:00

327 lines
10 KiB
Rust

use core::cell::Cell;
use core::convert::TryInto;
use core::sync::atomic::{compiler_fence, Ordering};
use core::{mem, ptr};
use atomic_polyfill::{AtomicU32, AtomicU8};
use embassy::blocking_mutex::raw::CriticalSectionRawMutex;
use embassy::blocking_mutex::Mutex;
use embassy::time::driver::{AlarmHandle, Driver};
use embassy::time::TICKS_PER_SECOND;
use stm32_metapac::timer::regs;
use crate::interrupt::{CriticalSection, InterruptExt};
use crate::pac::timer::vals;
use crate::rcc::sealed::RccPeripheral;
use crate::timer::sealed::{Basic16bitInstance as BasicInstance, GeneralPurpose16bitInstance as Instance};
use crate::{interrupt, peripherals};
#[cfg(not(any(time_driver_tim12, time_driver_tim15)))]
const ALARM_COUNT: usize = 3;
#[cfg(any(time_driver_tim12, time_driver_tim15))]
const ALARM_COUNT: usize = 1;
#[cfg(time_driver_tim2)]
type T = peripherals::TIM2;
#[cfg(time_driver_tim3)]
type T = peripherals::TIM3;
#[cfg(time_driver_tim4)]
type T = peripherals::TIM4;
#[cfg(time_driver_tim5)]
type T = peripherals::TIM5;
#[cfg(time_driver_tim12)]
type T = peripherals::TIM12;
#[cfg(time_driver_tim15)]
type T = peripherals::TIM15;
foreach_interrupt! {
(TIM2, timer, $block:ident, UP, $irq:ident) => {
#[cfg(time_driver_tim2)]
#[interrupt]
fn $irq() {
DRIVER.on_interrupt()
}
};
(TIM3, timer, $block:ident, UP, $irq:ident) => {
#[cfg(time_driver_tim3)]
#[interrupt]
fn $irq() {
DRIVER.on_interrupt()
}
};
(TIM4, timer, $block:ident, UP, $irq:ident) => {
#[cfg(time_driver_tim4)]
#[interrupt]
fn $irq() {
DRIVER.on_interrupt()
}
};
(TIM5, timer, $block:ident, UP, $irq:ident) => {
#[cfg(time_driver_tim5)]
#[interrupt]
fn $irq() {
DRIVER.on_interrupt()
}
};
(TIM12, timer, $block:ident, UP, $irq:ident) => {
#[cfg(time_driver_tim12)]
#[interrupt]
fn $irq() {
DRIVER.on_interrupt()
}
};
(TIM15, timer, $block:ident, UP, $irq:ident) => {
#[cfg(time_driver_tim15)]
#[interrupt]
fn $irq() {
DRIVER.on_interrupt()
}
};
}
// Clock timekeeping works with something we call "periods", which are time intervals
// of 2^15 ticks. The Clock counter value is 16 bits, so one "overflow cycle" is 2 periods.
//
// A `period` count is maintained in parallel to the Timer hardware `counter`, like this:
// - `period` and `counter` start at 0
// - `period` is incremented on overflow (at counter value 0)
// - `period` is incremented "midway" between overflows (at counter value 0x8000)
//
// Therefore, when `period` is even, counter is in 0..0x7FFF. When odd, counter is in 0x8000..0xFFFF
// This allows for now() to return the correct value even if it races an overflow.
//
// To get `now()`, `period` is read first, then `counter` is read. If the counter value matches
// the expected range for the `period` parity, we're done. If it doesn't, this means that
// a new period start has raced us between reading `period` and `counter`, so we assume the `counter` value
// corresponds to the next period.
//
// `period` is a 32bit integer, so It overflows on 2^32 * 2^15 / 32768 seconds of uptime, which is 136 years.
fn calc_now(period: u32, counter: u16) -> u64 {
((period as u64) << 15) + ((counter as u32 ^ ((period & 1) << 15)) as u64)
}
struct AlarmState {
timestamp: Cell<u64>,
// This is really a Option<(fn(*mut ()), *mut ())>
// but fn pointers aren't allowed in const yet
callback: Cell<*const ()>,
ctx: Cell<*mut ()>,
}
unsafe impl Send for AlarmState {}
impl AlarmState {
const fn new() -> Self {
Self {
timestamp: Cell::new(u64::MAX),
callback: Cell::new(ptr::null()),
ctx: Cell::new(ptr::null_mut()),
}
}
}
struct RtcDriver {
/// Number of 2^15 periods elapsed since boot.
period: AtomicU32,
alarm_count: AtomicU8,
/// Timestamp at which to fire alarm. u64::MAX if no alarm is scheduled.
alarms: Mutex<CriticalSectionRawMutex, [AlarmState; ALARM_COUNT]>,
}
const ALARM_STATE_NEW: AlarmState = AlarmState::new();
embassy::time_driver_impl!(static DRIVER: RtcDriver = RtcDriver {
period: AtomicU32::new(0),
alarm_count: AtomicU8::new(0),
alarms: Mutex::const_new(CriticalSectionRawMutex::new(), [ALARM_STATE_NEW; ALARM_COUNT]),
});
impl RtcDriver {
fn init(&'static self) {
let r = T::regs_gp16();
<T as RccPeripheral>::enable();
<T as RccPeripheral>::reset();
let timer_freq = T::frequency();
// NOTE(unsafe) Critical section to use the unsafe methods
critical_section::with(|_| unsafe {
r.cr1().modify(|w| w.set_cen(false));
r.cnt().write(|w| w.set_cnt(0));
let psc = timer_freq.0 / TICKS_PER_SECOND as u32 - 1;
let psc: u16 = match psc.try_into() {
Err(_) => panic!("psc division overflow: {}", psc),
Ok(n) => n,
};
r.psc().write(|w| w.set_psc(psc));
r.arr().write(|w| w.set_arr(u16::MAX));
// Set URS, generate update and clear URS
r.cr1().modify(|w| w.set_urs(vals::Urs::COUNTERONLY));
r.egr().write(|w| w.set_ug(true));
r.cr1().modify(|w| w.set_urs(vals::Urs::ANYEVENT));
// Mid-way point
r.ccr(0).write(|w| w.set_ccr(0x8000));
// Enable overflow and half-overflow interrupts
r.dier().write(|w| {
w.set_uie(true);
w.set_ccie(0, true);
});
let irq: <T as BasicInstance>::Interrupt = core::mem::transmute(());
irq.unpend();
irq.enable();
r.cr1().modify(|w| w.set_cen(true));
})
}
fn on_interrupt(&self) {
let r = T::regs_gp16();
// NOTE(unsafe) Use critical section to access the methods
// XXX: reduce the size of this critical section ?
critical_section::with(|cs| unsafe {
let sr = r.sr().read();
let dier = r.dier().read();
// Clear all interrupt flags. Bits in SR are "write 0 to clear", so write the bitwise NOT.
// Other approaches such as writing all zeros, or RMWing won't work, they can
// miss interrupts.
r.sr().write_value(regs::SrGp(!sr.0));
// Overflow
if sr.uif() {
self.next_period();
}
// Half overflow
if sr.ccif(0) {
self.next_period();
}
for n in 0..ALARM_COUNT {
if sr.ccif(n + 1) && dier.ccie(n + 1) {
self.trigger_alarm(n, cs);
}
}
})
}
fn next_period(&self) {
let r = T::regs_gp16();
let period = self.period.fetch_add(1, Ordering::Relaxed) + 1;
let t = (period as u64) << 15;
critical_section::with(move |cs| unsafe {
r.dier().modify(move |w| {
for n in 0..ALARM_COUNT {
let alarm = &self.alarms.borrow(cs)[n];
let at = alarm.timestamp.get();
if at < t + 0xc000 {
// just enable it. `set_alarm` has already set the correct CCR val.
w.set_ccie(n + 1, true);
}
}
})
})
}
fn get_alarm<'a>(&'a self, cs: CriticalSection<'a>, alarm: AlarmHandle) -> &'a AlarmState {
// safety: we're allowed to assume the AlarmState is created by us, and
// we never create one that's out of bounds.
unsafe { self.alarms.borrow(cs).get_unchecked(alarm.id() as usize) }
}
fn trigger_alarm(&self, n: usize, cs: CriticalSection) {
let alarm = &self.alarms.borrow(cs)[n];
alarm.timestamp.set(u64::MAX);
// Call after clearing alarm, so the callback can set another alarm.
// safety:
// - we can ignore the possiblity of `f` being unset (null) because of the safety contract of `allocate_alarm`.
// - other than that we only store valid function pointers into alarm.callback
let f: fn(*mut ()) = unsafe { mem::transmute(alarm.callback.get()) };
f(alarm.ctx.get());
}
}
impl Driver for RtcDriver {
fn now(&self) -> u64 {
let r = T::regs_gp16();
let period = self.period.load(Ordering::Relaxed);
compiler_fence(Ordering::Acquire);
// NOTE(unsafe) Atomic read with no side-effects
let counter = unsafe { r.cnt().read().cnt() };
calc_now(period, counter)
}
unsafe fn allocate_alarm(&self) -> Option<AlarmHandle> {
let id = self.alarm_count.fetch_update(Ordering::AcqRel, Ordering::Acquire, |x| {
if x < ALARM_COUNT as u8 {
Some(x + 1)
} else {
None
}
});
match id {
Ok(id) => Some(AlarmHandle::new(id)),
Err(_) => None,
}
}
fn set_alarm_callback(&self, alarm: AlarmHandle, callback: fn(*mut ()), ctx: *mut ()) {
critical_section::with(|cs| {
let alarm = self.get_alarm(cs, alarm);
alarm.callback.set(callback as *const ());
alarm.ctx.set(ctx);
})
}
fn set_alarm(&self, alarm: AlarmHandle, timestamp: u64) {
critical_section::with(|cs| {
let r = T::regs_gp16();
let n = alarm.id() as _;
let alarm = self.get_alarm(cs, alarm);
alarm.timestamp.set(timestamp);
let t = self.now();
if timestamp <= t {
unsafe { r.dier().modify(|w| w.set_ccie(n + 1, false)) };
self.trigger_alarm(n, cs);
return;
}
let safe_timestamp = timestamp.max(t + 3);
// Write the CCR value regardless of whether we're going to enable it now or not.
// This way, when we enable it later, the right value is already set.
unsafe { r.ccr(n + 1).write(|w| w.set_ccr(safe_timestamp as u16)) };
// Enable it if it'll happen soon. Otherwise, `next_period` will enable it.
let diff = timestamp - t;
// NOTE(unsafe) We're in a critical section
unsafe { r.dier().modify(|w| w.set_ccie(n + 1, diff < 0xc000)) };
})
}
}
pub(crate) fn init() {
DRIVER.init()
}