97 lines
2.8 KiB
Rust
97 lines
2.8 KiB
Rust
//! This example runs on the Raspberry Pi Pico with a Waveshare board containing a Semtech Sx1262 radio.
|
|
//! It demonstrates LORA P2P send functionality.
|
|
|
|
#![no_std]
|
|
#![no_main]
|
|
#![macro_use]
|
|
#![feature(type_alias_impl_trait)]
|
|
|
|
use defmt::*;
|
|
use embassy_executor::Spawner;
|
|
use embassy_lora::iv::GenericSx126xInterfaceVariant;
|
|
use embassy_rp::gpio::{Input, Level, Output, Pin, Pull};
|
|
use embassy_rp::spi::{Config, Spi};
|
|
use embassy_time::Delay;
|
|
use lora_phy::mod_params::*;
|
|
use lora_phy::sx1261_2::SX1261_2;
|
|
use lora_phy::LoRa;
|
|
use {defmt_rtt as _, panic_probe as _};
|
|
|
|
const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
|
|
|
|
#[embassy_executor::main]
|
|
async fn main(_spawner: Spawner) {
|
|
let p = embassy_rp::init(Default::default());
|
|
|
|
let miso = p.PIN_12;
|
|
let mosi = p.PIN_11;
|
|
let clk = p.PIN_10;
|
|
let spi = Spi::new(p.SPI1, clk, mosi, miso, p.DMA_CH0, p.DMA_CH1, Config::default());
|
|
|
|
let nss = Output::new(p.PIN_3.degrade(), Level::High);
|
|
let reset = Output::new(p.PIN_15.degrade(), Level::High);
|
|
let dio1 = Input::new(p.PIN_20.degrade(), Pull::None);
|
|
let busy = Input::new(p.PIN_2.degrade(), Pull::None);
|
|
|
|
let iv = GenericSx126xInterfaceVariant::new(nss, reset, dio1, busy, None, None).unwrap();
|
|
|
|
let mut lora = {
|
|
match LoRa::new(SX1261_2::new(BoardType::RpPicoWaveshareSx1262, spi, iv), false, Delay).await {
|
|
Ok(l) => l,
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
}
|
|
};
|
|
|
|
let mdltn_params = {
|
|
match lora.create_modulation_params(
|
|
SpreadingFactor::_10,
|
|
Bandwidth::_250KHz,
|
|
CodingRate::_4_8,
|
|
LORA_FREQUENCY_IN_HZ,
|
|
) {
|
|
Ok(mp) => mp,
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
}
|
|
};
|
|
|
|
let mut tx_pkt_params = {
|
|
match lora.create_tx_packet_params(4, false, true, false, &mdltn_params) {
|
|
Ok(pp) => pp,
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
}
|
|
};
|
|
|
|
match lora.prepare_for_tx(&mdltn_params, 20, false).await {
|
|
Ok(()) => {}
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
};
|
|
|
|
let buffer = [0x01u8, 0x02u8, 0x03u8];
|
|
match lora.tx(&mdltn_params, &mut tx_pkt_params, &buffer, 0xffffff).await {
|
|
Ok(()) => {
|
|
info!("TX DONE");
|
|
}
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
};
|
|
|
|
match lora.sleep(false).await {
|
|
Ok(()) => info!("Sleep successful"),
|
|
Err(err) => info!("Sleep unsuccessful = {}", err),
|
|
}
|
|
}
|