106 lines
3.1 KiB
Rust
106 lines
3.1 KiB
Rust
//! This example runs on the STM32 LoRa Discovery board, which has a builtin Semtech Sx1276 radio.
|
|
//! It demonstrates LORA P2P CAD functionality.
|
|
#![no_std]
|
|
#![no_main]
|
|
#![macro_use]
|
|
#![feature(type_alias_impl_trait)]
|
|
|
|
use defmt::*;
|
|
use embassy_executor::Spawner;
|
|
use embassy_lora::iv::Stm32l0InterfaceVariant;
|
|
use embassy_stm32::exti::{Channel, ExtiInput};
|
|
use embassy_stm32::gpio::{Input, Level, Output, Pin, Pull, Speed};
|
|
use embassy_stm32::spi;
|
|
use embassy_stm32::time::khz;
|
|
use embassy_time::{Delay, Duration, Timer};
|
|
use lora_phy::mod_params::*;
|
|
use lora_phy::sx1276_7_8_9::SX1276_7_8_9;
|
|
use lora_phy::LoRa;
|
|
use {defmt_rtt as _, panic_probe as _};
|
|
|
|
const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
|
|
|
|
#[embassy_executor::main]
|
|
async fn main(_spawner: Spawner) {
|
|
let mut config = embassy_stm32::Config::default();
|
|
config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSI16;
|
|
config.rcc.enable_hsi48 = true;
|
|
let p = embassy_stm32::init(config);
|
|
|
|
// SPI for sx1276
|
|
let spi = spi::Spi::new(
|
|
p.SPI1,
|
|
p.PB3,
|
|
p.PA7,
|
|
p.PA6,
|
|
p.DMA1_CH3,
|
|
p.DMA1_CH2,
|
|
khz(200),
|
|
spi::Config::default(),
|
|
);
|
|
|
|
let nss = Output::new(p.PA15.degrade(), Level::High, Speed::Low);
|
|
let reset = Output::new(p.PC0.degrade(), Level::High, Speed::Low);
|
|
|
|
let irq_pin = Input::new(p.PB4.degrade(), Pull::Up);
|
|
let irq = ExtiInput::new(irq_pin, p.EXTI4.degrade());
|
|
|
|
let iv = Stm32l0InterfaceVariant::new(nss, reset, irq, None, None).unwrap();
|
|
|
|
let mut delay = Delay;
|
|
|
|
let mut lora = {
|
|
match LoRa::new(SX1276_7_8_9::new(BoardType::Stm32l0Sx1276, spi, iv), false, &mut delay).await {
|
|
Ok(l) => l,
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
}
|
|
};
|
|
|
|
let mut debug_indicator = Output::new(p.PB5, Level::Low, Speed::Low);
|
|
let mut start_indicator = Output::new(p.PB6, Level::Low, Speed::Low);
|
|
|
|
start_indicator.set_high();
|
|
Timer::after(Duration::from_secs(5)).await;
|
|
start_indicator.set_low();
|
|
|
|
let mdltn_params = {
|
|
match lora.create_modulation_params(
|
|
SpreadingFactor::_10,
|
|
Bandwidth::_250KHz,
|
|
CodingRate::_4_8,
|
|
LORA_FREQUENCY_IN_HZ,
|
|
) {
|
|
Ok(mp) => mp,
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
}
|
|
};
|
|
|
|
match lora.prepare_for_cad(&mdltn_params, true).await {
|
|
Ok(()) => {}
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
};
|
|
|
|
match lora.cad().await {
|
|
Ok(cad_activity_detected) => {
|
|
if cad_activity_detected {
|
|
info!("cad successful with activity detected")
|
|
} else {
|
|
info!("cad successful without activity detected")
|
|
}
|
|
debug_indicator.set_high();
|
|
Timer::after(Duration::from_secs(5)).await;
|
|
debug_indicator.set_low();
|
|
}
|
|
Err(err) => info!("cad unsuccessful = {}", err),
|
|
}
|
|
}
|