921780e6bf
- Move typelevel interrupts to a special-purpose mod: `embassy_xx::interrupt::typelevel`. - Reexport the PAC interrupt enum in `embassy_xx::interrupt`. This has a few advantages: - The `embassy_xx::interrupt` module is now more "standard". - It works with `cortex-m` functions for manipulating interrupts, for example. - It works with RTIC. - the interrupt enum allows holding value that can be "any interrupt at runtime", this can't be done with typelevel irqs. - When "const-generics on enums" is stable, we can remove the typelevel interrupts without disruptive changes to `embassy_xx::interrupt`.
677 lines
22 KiB
Rust
677 lines
22 KiB
Rust
//! Async buffered UART driver.
|
|
//!
|
|
//! Note that discarding a future from a read or write operation may lead to losing
|
|
//! data. For example, when using `futures_util::future::select` and completion occurs
|
|
//! on the "other" future, you should capture the incomplete future and continue to use
|
|
//! it for the next read or write. This pattern is a consideration for all IO, and not
|
|
//! just serial communications.
|
|
//!
|
|
//! Please also see [crate::uarte] to understand when [BufferedUarte] should be used.
|
|
|
|
use core::cmp::min;
|
|
use core::future::poll_fn;
|
|
use core::marker::PhantomData;
|
|
use core::slice;
|
|
use core::sync::atomic::{compiler_fence, AtomicU8, AtomicUsize, Ordering};
|
|
use core::task::Poll;
|
|
|
|
use embassy_hal_common::atomic_ring_buffer::RingBuffer;
|
|
use embassy_hal_common::{into_ref, PeripheralRef};
|
|
use embassy_sync::waitqueue::AtomicWaker;
|
|
// Re-export SVD variants to allow user to directly set values
|
|
pub use pac::uarte0::{baudrate::BAUDRATE_A as Baudrate, config::PARITY_A as Parity};
|
|
|
|
use crate::gpio::sealed::Pin;
|
|
use crate::gpio::{self, AnyPin, Pin as GpioPin, PselBits};
|
|
use crate::interrupt::typelevel::Interrupt;
|
|
use crate::ppi::{
|
|
self, AnyConfigurableChannel, AnyGroup, Channel, ConfigurableChannel, Event, Group, Ppi, PpiGroup, Task,
|
|
};
|
|
use crate::timer::{Instance as TimerInstance, Timer};
|
|
use crate::uarte::{apply_workaround_for_enable_anomaly, Config, Instance as UarteInstance};
|
|
use crate::{interrupt, pac, Peripheral};
|
|
|
|
mod sealed {
|
|
use super::*;
|
|
|
|
pub struct State {
|
|
pub tx_waker: AtomicWaker,
|
|
pub tx_buf: RingBuffer,
|
|
pub tx_count: AtomicUsize,
|
|
|
|
pub rx_waker: AtomicWaker,
|
|
pub rx_buf: RingBuffer,
|
|
pub rx_bufs: AtomicU8,
|
|
pub rx_ppi_ch: AtomicU8,
|
|
}
|
|
}
|
|
|
|
/// UART error.
|
|
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
|
|
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
|
|
#[non_exhaustive]
|
|
pub enum Error {
|
|
// No errors for now
|
|
}
|
|
|
|
pub(crate) use sealed::State;
|
|
|
|
impl State {
|
|
pub(crate) const fn new() -> Self {
|
|
Self {
|
|
tx_waker: AtomicWaker::new(),
|
|
tx_buf: RingBuffer::new(),
|
|
tx_count: AtomicUsize::new(0),
|
|
|
|
rx_waker: AtomicWaker::new(),
|
|
rx_buf: RingBuffer::new(),
|
|
rx_bufs: AtomicU8::new(0),
|
|
rx_ppi_ch: AtomicU8::new(0),
|
|
}
|
|
}
|
|
}
|
|
|
|
/// Interrupt handler.
|
|
pub struct InterruptHandler<U: UarteInstance> {
|
|
_phantom: PhantomData<U>,
|
|
}
|
|
|
|
impl<U: UarteInstance> interrupt::typelevel::Handler<U::Interrupt> for InterruptHandler<U> {
|
|
unsafe fn on_interrupt() {
|
|
//trace!("irq: start");
|
|
let r = U::regs();
|
|
let s = U::buffered_state();
|
|
|
|
let buf_len = s.rx_buf.len();
|
|
let half_len = buf_len / 2;
|
|
let mut tx = unsafe { s.tx_buf.reader() };
|
|
let mut rx = unsafe { s.rx_buf.writer() };
|
|
|
|
if r.events_error.read().bits() != 0 {
|
|
r.events_error.reset();
|
|
let errs = r.errorsrc.read();
|
|
r.errorsrc.write(|w| unsafe { w.bits(errs.bits()) });
|
|
|
|
if errs.overrun().bit() {
|
|
panic!("BufferedUarte overrun");
|
|
}
|
|
}
|
|
|
|
// Received some bytes, wake task.
|
|
if r.inten.read().rxdrdy().bit_is_set() && r.events_rxdrdy.read().bits() != 0 {
|
|
r.intenclr.write(|w| w.rxdrdy().clear());
|
|
r.events_rxdrdy.reset();
|
|
s.rx_waker.wake();
|
|
}
|
|
|
|
// If not RXing, start.
|
|
if s.rx_bufs.load(Ordering::Relaxed) == 0 {
|
|
let (ptr, len) = rx.push_buf();
|
|
if len >= half_len {
|
|
//trace!(" irq_rx: starting {:?}", half_len);
|
|
s.rx_bufs.store(1, Ordering::Relaxed);
|
|
|
|
// Set up the DMA read
|
|
r.rxd.ptr.write(|w| unsafe { w.ptr().bits(ptr as u32) });
|
|
r.rxd.maxcnt.write(|w| unsafe { w.maxcnt().bits(half_len as _) });
|
|
|
|
// Start UARTE Receive transaction
|
|
r.tasks_startrx.write(|w| unsafe { w.bits(1) });
|
|
rx.push_done(half_len);
|
|
r.intenset.write(|w| w.rxstarted().set());
|
|
}
|
|
}
|
|
|
|
if r.events_rxstarted.read().bits() != 0 {
|
|
//trace!(" irq_rx: rxstarted");
|
|
let (ptr, len) = rx.push_buf();
|
|
if len >= half_len {
|
|
//trace!(" irq_rx: starting second {:?}", half_len);
|
|
|
|
// Set up the DMA read
|
|
r.rxd.ptr.write(|w| unsafe { w.ptr().bits(ptr as u32) });
|
|
r.rxd.maxcnt.write(|w| unsafe { w.maxcnt().bits(half_len as _) });
|
|
|
|
let chn = s.rx_ppi_ch.load(Ordering::Relaxed);
|
|
|
|
ppi::regs().chenset.write(|w| unsafe { w.bits(1 << chn) });
|
|
|
|
rx.push_done(half_len);
|
|
|
|
r.events_rxstarted.reset();
|
|
} else {
|
|
//trace!(" irq_rx: rxstarted no buf");
|
|
r.intenclr.write(|w| w.rxstarted().clear());
|
|
}
|
|
}
|
|
|
|
// =============================
|
|
|
|
// TX end
|
|
if r.events_endtx.read().bits() != 0 {
|
|
r.events_endtx.reset();
|
|
|
|
let n = s.tx_count.load(Ordering::Relaxed);
|
|
//trace!(" irq_tx: endtx {:?}", n);
|
|
tx.pop_done(n);
|
|
s.tx_waker.wake();
|
|
s.tx_count.store(0, Ordering::Relaxed);
|
|
}
|
|
|
|
// If not TXing, start.
|
|
if s.tx_count.load(Ordering::Relaxed) == 0 {
|
|
let (ptr, len) = tx.pop_buf();
|
|
if len != 0 {
|
|
//trace!(" irq_tx: starting {:?}", len);
|
|
s.tx_count.store(len, Ordering::Relaxed);
|
|
|
|
// Set up the DMA write
|
|
r.txd.ptr.write(|w| unsafe { w.ptr().bits(ptr as u32) });
|
|
r.txd.maxcnt.write(|w| unsafe { w.maxcnt().bits(len as _) });
|
|
|
|
// Start UARTE Transmit transaction
|
|
r.tasks_starttx.write(|w| unsafe { w.bits(1) });
|
|
}
|
|
}
|
|
|
|
//trace!("irq: end");
|
|
}
|
|
}
|
|
|
|
/// Buffered UARTE driver.
|
|
pub struct BufferedUarte<'d, U: UarteInstance, T: TimerInstance> {
|
|
_peri: PeripheralRef<'d, U>,
|
|
timer: Timer<'d, T>,
|
|
_ppi_ch1: Ppi<'d, AnyConfigurableChannel, 1, 1>,
|
|
_ppi_ch2: Ppi<'d, AnyConfigurableChannel, 1, 2>,
|
|
_ppi_group: PpiGroup<'d, AnyGroup>,
|
|
}
|
|
|
|
impl<'d, U: UarteInstance, T: TimerInstance> Unpin for BufferedUarte<'d, U, T> {}
|
|
|
|
impl<'d, U: UarteInstance, T: TimerInstance> BufferedUarte<'d, U, T> {
|
|
/// Create a new BufferedUarte without hardware flow control.
|
|
///
|
|
/// # Panics
|
|
///
|
|
/// Panics if `rx_buffer.len()` is odd.
|
|
pub fn new(
|
|
uarte: impl Peripheral<P = U> + 'd,
|
|
timer: impl Peripheral<P = T> + 'd,
|
|
ppi_ch1: impl Peripheral<P = impl ConfigurableChannel> + 'd,
|
|
ppi_ch2: impl Peripheral<P = impl ConfigurableChannel> + 'd,
|
|
ppi_group: impl Peripheral<P = impl Group> + 'd,
|
|
_irq: impl interrupt::typelevel::Binding<U::Interrupt, InterruptHandler<U>> + 'd,
|
|
rxd: impl Peripheral<P = impl GpioPin> + 'd,
|
|
txd: impl Peripheral<P = impl GpioPin> + 'd,
|
|
config: Config,
|
|
rx_buffer: &'d mut [u8],
|
|
tx_buffer: &'d mut [u8],
|
|
) -> Self {
|
|
into_ref!(rxd, txd, ppi_ch1, ppi_ch2, ppi_group);
|
|
Self::new_inner(
|
|
uarte,
|
|
timer,
|
|
ppi_ch1.map_into(),
|
|
ppi_ch2.map_into(),
|
|
ppi_group.map_into(),
|
|
rxd.map_into(),
|
|
txd.map_into(),
|
|
None,
|
|
None,
|
|
config,
|
|
rx_buffer,
|
|
tx_buffer,
|
|
)
|
|
}
|
|
|
|
/// Create a new BufferedUarte with hardware flow control (RTS/CTS)
|
|
///
|
|
/// # Panics
|
|
///
|
|
/// Panics if `rx_buffer.len()` is odd.
|
|
pub fn new_with_rtscts(
|
|
uarte: impl Peripheral<P = U> + 'd,
|
|
timer: impl Peripheral<P = T> + 'd,
|
|
ppi_ch1: impl Peripheral<P = impl ConfigurableChannel> + 'd,
|
|
ppi_ch2: impl Peripheral<P = impl ConfigurableChannel> + 'd,
|
|
ppi_group: impl Peripheral<P = impl Group> + 'd,
|
|
_irq: impl interrupt::typelevel::Binding<U::Interrupt, InterruptHandler<U>> + 'd,
|
|
rxd: impl Peripheral<P = impl GpioPin> + 'd,
|
|
txd: impl Peripheral<P = impl GpioPin> + 'd,
|
|
cts: impl Peripheral<P = impl GpioPin> + 'd,
|
|
rts: impl Peripheral<P = impl GpioPin> + 'd,
|
|
config: Config,
|
|
rx_buffer: &'d mut [u8],
|
|
tx_buffer: &'d mut [u8],
|
|
) -> Self {
|
|
into_ref!(rxd, txd, cts, rts, ppi_ch1, ppi_ch2, ppi_group);
|
|
Self::new_inner(
|
|
uarte,
|
|
timer,
|
|
ppi_ch1.map_into(),
|
|
ppi_ch2.map_into(),
|
|
ppi_group.map_into(),
|
|
rxd.map_into(),
|
|
txd.map_into(),
|
|
Some(cts.map_into()),
|
|
Some(rts.map_into()),
|
|
config,
|
|
rx_buffer,
|
|
tx_buffer,
|
|
)
|
|
}
|
|
|
|
fn new_inner(
|
|
peri: impl Peripheral<P = U> + 'd,
|
|
timer: impl Peripheral<P = T> + 'd,
|
|
ppi_ch1: PeripheralRef<'d, AnyConfigurableChannel>,
|
|
ppi_ch2: PeripheralRef<'d, AnyConfigurableChannel>,
|
|
ppi_group: PeripheralRef<'d, AnyGroup>,
|
|
rxd: PeripheralRef<'d, AnyPin>,
|
|
txd: PeripheralRef<'d, AnyPin>,
|
|
cts: Option<PeripheralRef<'d, AnyPin>>,
|
|
rts: Option<PeripheralRef<'d, AnyPin>>,
|
|
config: Config,
|
|
rx_buffer: &'d mut [u8],
|
|
tx_buffer: &'d mut [u8],
|
|
) -> Self {
|
|
into_ref!(peri, timer);
|
|
|
|
assert!(rx_buffer.len() % 2 == 0);
|
|
|
|
let r = U::regs();
|
|
|
|
rxd.conf().write(|w| w.input().connect().drive().h0h1());
|
|
r.psel.rxd.write(|w| unsafe { w.bits(rxd.psel_bits()) });
|
|
|
|
txd.set_high();
|
|
txd.conf().write(|w| w.dir().output().drive().h0h1());
|
|
r.psel.txd.write(|w| unsafe { w.bits(txd.psel_bits()) });
|
|
|
|
if let Some(pin) = &cts {
|
|
pin.conf().write(|w| w.input().connect().drive().h0h1());
|
|
}
|
|
r.psel.cts.write(|w| unsafe { w.bits(cts.psel_bits()) });
|
|
|
|
if let Some(pin) = &rts {
|
|
pin.set_high();
|
|
pin.conf().write(|w| w.dir().output().drive().h0h1());
|
|
}
|
|
r.psel.rts.write(|w| unsafe { w.bits(rts.psel_bits()) });
|
|
|
|
// Initialize state
|
|
let s = U::buffered_state();
|
|
s.tx_count.store(0, Ordering::Relaxed);
|
|
s.rx_bufs.store(0, Ordering::Relaxed);
|
|
let len = tx_buffer.len();
|
|
unsafe { s.tx_buf.init(tx_buffer.as_mut_ptr(), len) };
|
|
let len = rx_buffer.len();
|
|
unsafe { s.rx_buf.init(rx_buffer.as_mut_ptr(), len) };
|
|
|
|
// Configure
|
|
r.config.write(|w| {
|
|
w.hwfc().bit(false);
|
|
w.parity().variant(config.parity);
|
|
w
|
|
});
|
|
r.baudrate.write(|w| w.baudrate().variant(config.baudrate));
|
|
|
|
// clear errors
|
|
let errors = r.errorsrc.read().bits();
|
|
r.errorsrc.write(|w| unsafe { w.bits(errors) });
|
|
|
|
r.events_rxstarted.reset();
|
|
r.events_txstarted.reset();
|
|
r.events_error.reset();
|
|
r.events_endrx.reset();
|
|
r.events_endtx.reset();
|
|
|
|
// Enable interrupts
|
|
r.intenclr.write(|w| unsafe { w.bits(!0) });
|
|
r.intenset.write(|w| {
|
|
w.endtx().set();
|
|
w.rxstarted().set();
|
|
w.error().set();
|
|
w
|
|
});
|
|
|
|
// Enable UARTE instance
|
|
apply_workaround_for_enable_anomaly(&r);
|
|
r.enable.write(|w| w.enable().enabled());
|
|
|
|
// Configure byte counter.
|
|
let timer = Timer::new_counter(timer);
|
|
timer.cc(1).write(rx_buffer.len() as u32 * 2);
|
|
timer.cc(1).short_compare_clear();
|
|
timer.clear();
|
|
timer.start();
|
|
|
|
let mut ppi_ch1 = Ppi::new_one_to_one(ppi_ch1, Event::from_reg(&r.events_rxdrdy), timer.task_count());
|
|
ppi_ch1.enable();
|
|
|
|
s.rx_ppi_ch.store(ppi_ch2.number() as u8, Ordering::Relaxed);
|
|
let mut ppi_group = PpiGroup::new(ppi_group);
|
|
let mut ppi_ch2 = Ppi::new_one_to_two(
|
|
ppi_ch2,
|
|
Event::from_reg(&r.events_endrx),
|
|
Task::from_reg(&r.tasks_startrx),
|
|
ppi_group.task_disable_all(),
|
|
);
|
|
ppi_ch2.disable();
|
|
ppi_group.add_channel(&ppi_ch2);
|
|
|
|
U::Interrupt::pend();
|
|
unsafe { U::Interrupt::enable() };
|
|
|
|
Self {
|
|
_peri: peri,
|
|
timer,
|
|
_ppi_ch1: ppi_ch1,
|
|
_ppi_ch2: ppi_ch2,
|
|
_ppi_group: ppi_group,
|
|
}
|
|
}
|
|
|
|
fn pend_irq() {
|
|
U::Interrupt::pend()
|
|
}
|
|
|
|
/// Adjust the baud rate to the provided value.
|
|
pub fn set_baudrate(&mut self, baudrate: Baudrate) {
|
|
let r = U::regs();
|
|
r.baudrate.write(|w| w.baudrate().variant(baudrate));
|
|
}
|
|
|
|
/// Split the UART in reader and writer parts.
|
|
///
|
|
/// This allows reading and writing concurrently from independent tasks.
|
|
pub fn split<'u>(&'u mut self) -> (BufferedUarteRx<'u, 'd, U, T>, BufferedUarteTx<'u, 'd, U, T>) {
|
|
(BufferedUarteRx { inner: self }, BufferedUarteTx { inner: self })
|
|
}
|
|
|
|
async fn inner_read(&self, buf: &mut [u8]) -> Result<usize, Error> {
|
|
let data = self.inner_fill_buf().await?;
|
|
let n = data.len().min(buf.len());
|
|
buf[..n].copy_from_slice(&data[..n]);
|
|
self.inner_consume(n);
|
|
Ok(n)
|
|
}
|
|
|
|
async fn inner_write<'a>(&'a self, buf: &'a [u8]) -> Result<usize, Error> {
|
|
poll_fn(move |cx| {
|
|
//trace!("poll_write: {:?}", buf.len());
|
|
let s = U::buffered_state();
|
|
let mut tx = unsafe { s.tx_buf.writer() };
|
|
|
|
let tx_buf = tx.push_slice();
|
|
if tx_buf.is_empty() {
|
|
//trace!("poll_write: pending");
|
|
s.tx_waker.register(cx.waker());
|
|
return Poll::Pending;
|
|
}
|
|
|
|
let n = min(tx_buf.len(), buf.len());
|
|
tx_buf[..n].copy_from_slice(&buf[..n]);
|
|
tx.push_done(n);
|
|
|
|
//trace!("poll_write: queued {:?}", n);
|
|
|
|
compiler_fence(Ordering::SeqCst);
|
|
Self::pend_irq();
|
|
|
|
Poll::Ready(Ok(n))
|
|
})
|
|
.await
|
|
}
|
|
|
|
async fn inner_flush<'a>(&'a self) -> Result<(), Error> {
|
|
poll_fn(move |cx| {
|
|
//trace!("poll_flush");
|
|
let s = U::buffered_state();
|
|
if !s.tx_buf.is_empty() {
|
|
//trace!("poll_flush: pending");
|
|
s.tx_waker.register(cx.waker());
|
|
return Poll::Pending;
|
|
}
|
|
|
|
Poll::Ready(Ok(()))
|
|
})
|
|
.await
|
|
}
|
|
|
|
async fn inner_fill_buf<'a>(&'a self) -> Result<&'a [u8], Error> {
|
|
poll_fn(move |cx| {
|
|
compiler_fence(Ordering::SeqCst);
|
|
//trace!("poll_read");
|
|
|
|
let r = U::regs();
|
|
let s = U::buffered_state();
|
|
|
|
// Read the RXDRDY counter.
|
|
T::regs().tasks_capture[0].write(|w| unsafe { w.bits(1) });
|
|
let mut end = T::regs().cc[0].read().bits() as usize;
|
|
//trace!(" rxdrdy count = {:?}", end);
|
|
|
|
// We've set a compare channel that resets the counter to 0 when it reaches `len*2`.
|
|
// However, it's unclear if that's instant, or there's a small window where you can
|
|
// still read `len()*2`.
|
|
// This could happen if in one clock cycle the counter is updated, and in the next the
|
|
// clear takes effect. The docs are very sparse, they just say "Task delays: After TIMER
|
|
// is started, the CLEAR, COUNT, and STOP tasks are guaranteed to take effect within one
|
|
// clock cycle of the PCLK16M." :shrug:
|
|
// So, we wrap the counter ourselves, just in case.
|
|
if end > s.rx_buf.len() * 2 {
|
|
end = 0
|
|
}
|
|
|
|
// This logic mirrors `atomic_ring_buffer::Reader::pop_buf()`
|
|
let mut start = s.rx_buf.start.load(Ordering::Relaxed);
|
|
let len = s.rx_buf.len();
|
|
if start == end {
|
|
//trace!(" empty");
|
|
s.rx_waker.register(cx.waker());
|
|
r.intenset.write(|w| w.rxdrdy().set_bit());
|
|
return Poll::Pending;
|
|
}
|
|
|
|
if start >= len {
|
|
start -= len
|
|
}
|
|
if end >= len {
|
|
end -= len
|
|
}
|
|
|
|
let n = if end > start { end - start } else { len - start };
|
|
assert!(n != 0);
|
|
//trace!(" uarte ringbuf: pop_buf {:?}..{:?}", start, start + n);
|
|
|
|
let buf = s.rx_buf.buf.load(Ordering::Relaxed);
|
|
Poll::Ready(Ok(unsafe { slice::from_raw_parts(buf.add(start), n) }))
|
|
})
|
|
.await
|
|
}
|
|
|
|
fn inner_consume(&self, amt: usize) {
|
|
if amt == 0 {
|
|
return;
|
|
}
|
|
|
|
let s = U::buffered_state();
|
|
let mut rx = unsafe { s.rx_buf.reader() };
|
|
rx.pop_done(amt);
|
|
U::regs().intenset.write(|w| w.rxstarted().set());
|
|
}
|
|
|
|
/// Pull some bytes from this source into the specified buffer, returning how many bytes were read.
|
|
pub async fn read(&mut self, buf: &mut [u8]) -> Result<usize, Error> {
|
|
self.inner_read(buf).await
|
|
}
|
|
|
|
/// Return the contents of the internal buffer, filling it with more data from the inner reader if it is empty.
|
|
pub async fn fill_buf(&mut self) -> Result<&[u8], Error> {
|
|
self.inner_fill_buf().await
|
|
}
|
|
|
|
/// Tell this buffer that `amt` bytes have been consumed from the buffer, so they should no longer be returned in calls to `fill_buf`.
|
|
pub fn consume(&mut self, amt: usize) {
|
|
self.inner_consume(amt)
|
|
}
|
|
|
|
/// Write a buffer into this writer, returning how many bytes were written.
|
|
pub async fn write(&mut self, buf: &[u8]) -> Result<usize, Error> {
|
|
self.inner_write(buf).await
|
|
}
|
|
|
|
/// Flush this output stream, ensuring that all intermediately buffered contents reach their destination.
|
|
pub async fn flush(&mut self) -> Result<(), Error> {
|
|
self.inner_flush().await
|
|
}
|
|
}
|
|
|
|
/// Reader part of the buffered UARTE driver.
|
|
pub struct BufferedUarteTx<'u, 'd, U: UarteInstance, T: TimerInstance> {
|
|
inner: &'u BufferedUarte<'d, U, T>,
|
|
}
|
|
|
|
impl<'u, 'd, U: UarteInstance, T: TimerInstance> BufferedUarteTx<'u, 'd, U, T> {
|
|
/// Write a buffer into this writer, returning how many bytes were written.
|
|
pub async fn write(&mut self, buf: &[u8]) -> Result<usize, Error> {
|
|
self.inner.inner_write(buf).await
|
|
}
|
|
|
|
/// Flush this output stream, ensuring that all intermediately buffered contents reach their destination.
|
|
pub async fn flush(&mut self) -> Result<(), Error> {
|
|
self.inner.inner_flush().await
|
|
}
|
|
}
|
|
|
|
/// Writer part of the buffered UARTE driver.
|
|
pub struct BufferedUarteRx<'u, 'd, U: UarteInstance, T: TimerInstance> {
|
|
inner: &'u BufferedUarte<'d, U, T>,
|
|
}
|
|
|
|
impl<'u, 'd, U: UarteInstance, T: TimerInstance> BufferedUarteRx<'u, 'd, U, T> {
|
|
/// Pull some bytes from this source into the specified buffer, returning how many bytes were read.
|
|
pub async fn read(&mut self, buf: &mut [u8]) -> Result<usize, Error> {
|
|
self.inner.inner_read(buf).await
|
|
}
|
|
|
|
/// Return the contents of the internal buffer, filling it with more data from the inner reader if it is empty.
|
|
pub async fn fill_buf(&mut self) -> Result<&[u8], Error> {
|
|
self.inner.inner_fill_buf().await
|
|
}
|
|
|
|
/// Tell this buffer that `amt` bytes have been consumed from the buffer, so they should no longer be returned in calls to `fill_buf`.
|
|
pub fn consume(&mut self, amt: usize) {
|
|
self.inner.inner_consume(amt)
|
|
}
|
|
}
|
|
|
|
#[cfg(feature = "nightly")]
|
|
mod _embedded_io {
|
|
use super::*;
|
|
|
|
impl embedded_io::Error for Error {
|
|
fn kind(&self) -> embedded_io::ErrorKind {
|
|
match *self {}
|
|
}
|
|
}
|
|
|
|
impl<'d, U: UarteInstance, T: TimerInstance> embedded_io::Io for BufferedUarte<'d, U, T> {
|
|
type Error = Error;
|
|
}
|
|
|
|
impl<'u, 'd, U: UarteInstance, T: TimerInstance> embedded_io::Io for BufferedUarteRx<'u, 'd, U, T> {
|
|
type Error = Error;
|
|
}
|
|
|
|
impl<'u, 'd, U: UarteInstance, T: TimerInstance> embedded_io::Io for BufferedUarteTx<'u, 'd, U, T> {
|
|
type Error = Error;
|
|
}
|
|
|
|
impl<'d, U: UarteInstance, T: TimerInstance> embedded_io::asynch::Read for BufferedUarte<'d, U, T> {
|
|
async fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
|
|
self.inner_read(buf).await
|
|
}
|
|
}
|
|
|
|
impl<'u, 'd: 'u, U: UarteInstance, T: TimerInstance> embedded_io::asynch::Read for BufferedUarteRx<'u, 'd, U, T> {
|
|
async fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
|
|
self.inner.inner_read(buf).await
|
|
}
|
|
}
|
|
|
|
impl<'d, U: UarteInstance, T: TimerInstance> embedded_io::asynch::BufRead for BufferedUarte<'d, U, T> {
|
|
async fn fill_buf(&mut self) -> Result<&[u8], Self::Error> {
|
|
self.inner_fill_buf().await
|
|
}
|
|
|
|
fn consume(&mut self, amt: usize) {
|
|
self.inner_consume(amt)
|
|
}
|
|
}
|
|
|
|
impl<'u, 'd: 'u, U: UarteInstance, T: TimerInstance> embedded_io::asynch::BufRead for BufferedUarteRx<'u, 'd, U, T> {
|
|
async fn fill_buf(&mut self) -> Result<&[u8], Self::Error> {
|
|
self.inner.inner_fill_buf().await
|
|
}
|
|
|
|
fn consume(&mut self, amt: usize) {
|
|
self.inner.inner_consume(amt)
|
|
}
|
|
}
|
|
|
|
impl<'d, U: UarteInstance, T: TimerInstance> embedded_io::asynch::Write for BufferedUarte<'d, U, T> {
|
|
async fn write(&mut self, buf: &[u8]) -> Result<usize, Self::Error> {
|
|
self.inner_write(buf).await
|
|
}
|
|
|
|
async fn flush(&mut self) -> Result<(), Self::Error> {
|
|
self.inner_flush().await
|
|
}
|
|
}
|
|
|
|
impl<'u, 'd: 'u, U: UarteInstance, T: TimerInstance> embedded_io::asynch::Write for BufferedUarteTx<'u, 'd, U, T> {
|
|
async fn write(&mut self, buf: &[u8]) -> Result<usize, Self::Error> {
|
|
self.inner.inner_write(buf).await
|
|
}
|
|
|
|
async fn flush(&mut self) -> Result<(), Self::Error> {
|
|
self.inner.inner_flush().await
|
|
}
|
|
}
|
|
}
|
|
|
|
impl<'a, U: UarteInstance, T: TimerInstance> Drop for BufferedUarte<'a, U, T> {
|
|
fn drop(&mut self) {
|
|
self._ppi_group.disable_all();
|
|
|
|
let r = U::regs();
|
|
|
|
self.timer.stop();
|
|
|
|
r.inten.reset();
|
|
r.events_rxto.reset();
|
|
r.tasks_stoprx.write(|w| unsafe { w.bits(1) });
|
|
r.events_txstopped.reset();
|
|
r.tasks_stoptx.write(|w| unsafe { w.bits(1) });
|
|
|
|
while r.events_txstopped.read().bits() == 0 {}
|
|
while r.events_rxto.read().bits() == 0 {}
|
|
|
|
r.enable.write(|w| w.enable().disabled());
|
|
|
|
gpio::deconfigure_pin(r.psel.rxd.read().bits());
|
|
gpio::deconfigure_pin(r.psel.txd.read().bits());
|
|
gpio::deconfigure_pin(r.psel.rts.read().bits());
|
|
gpio::deconfigure_pin(r.psel.cts.read().bits());
|
|
|
|
let s = U::buffered_state();
|
|
unsafe {
|
|
s.rx_buf.deinit();
|
|
s.tx_buf.deinit();
|
|
}
|
|
}
|
|
}
|