105 lines
3.3 KiB
Rust
105 lines
3.3 KiB
Rust
//! This example runs on the RAK4631 WisBlock, which has an nRF52840 MCU and Semtech Sx126x radio.
|
|
//! Other nrf/sx126x combinations may work with appropriate pin modifications.
|
|
//! It demonstrates LORA P2P send functionality.
|
|
#![no_std]
|
|
#![no_main]
|
|
#![macro_use]
|
|
#![feature(type_alias_impl_trait)]
|
|
|
|
use defmt::*;
|
|
use embassy_executor::Spawner;
|
|
use embassy_lora::iv::GenericSx126xInterfaceVariant;
|
|
use embassy_nrf::gpio::{Input, Level, Output, OutputDrive, Pin as _, Pull};
|
|
use embassy_nrf::{bind_interrupts, peripherals, spim};
|
|
use embassy_time::Delay;
|
|
use lora_phy::mod_params::*;
|
|
use lora_phy::sx1261_2::SX1261_2;
|
|
use lora_phy::LoRa;
|
|
use {defmt_rtt as _, panic_probe as _};
|
|
|
|
const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
|
|
|
|
bind_interrupts!(struct Irqs {
|
|
SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1 => spim::InterruptHandler<peripherals::TWISPI1>;
|
|
});
|
|
|
|
#[embassy_executor::main]
|
|
async fn main(_spawner: Spawner) {
|
|
let p = embassy_nrf::init(Default::default());
|
|
let mut spi_config = spim::Config::default();
|
|
spi_config.frequency = spim::Frequency::M16;
|
|
|
|
let spim = spim::Spim::new(p.TWISPI1, Irqs, p.P1_11, p.P1_13, p.P1_12, spi_config);
|
|
|
|
let nss = Output::new(p.P1_10.degrade(), Level::High, OutputDrive::Standard);
|
|
let reset = Output::new(p.P1_06.degrade(), Level::High, OutputDrive::Standard);
|
|
let dio1 = Input::new(p.P1_15.degrade(), Pull::Down);
|
|
let busy = Input::new(p.P1_14.degrade(), Pull::Down);
|
|
let rf_switch_rx = Output::new(p.P1_05.degrade(), Level::Low, OutputDrive::Standard);
|
|
let rf_switch_tx = Output::new(p.P1_07.degrade(), Level::Low, OutputDrive::Standard);
|
|
|
|
let iv =
|
|
GenericSx126xInterfaceVariant::new(nss, reset, dio1, busy, Some(rf_switch_rx), Some(rf_switch_tx)).unwrap();
|
|
|
|
let mut delay = Delay;
|
|
|
|
let mut lora = {
|
|
match LoRa::new(SX1261_2::new(BoardType::Rak4631Sx1262, spim, iv), false, &mut delay).await {
|
|
Ok(l) => l,
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
}
|
|
};
|
|
|
|
let mdltn_params = {
|
|
match lora.create_modulation_params(
|
|
SpreadingFactor::_10,
|
|
Bandwidth::_250KHz,
|
|
CodingRate::_4_8,
|
|
LORA_FREQUENCY_IN_HZ,
|
|
) {
|
|
Ok(mp) => mp,
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
}
|
|
};
|
|
|
|
let mut tx_pkt_params = {
|
|
match lora.create_tx_packet_params(4, false, true, false, &mdltn_params) {
|
|
Ok(pp) => pp,
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
}
|
|
};
|
|
|
|
match lora.prepare_for_tx(&mdltn_params, 20, false).await {
|
|
Ok(()) => {}
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
};
|
|
|
|
let buffer = [0x01u8, 0x02u8, 0x03u8];
|
|
match lora.tx(&mdltn_params, &mut tx_pkt_params, &buffer, 0xffffff).await {
|
|
Ok(()) => {
|
|
info!("TX DONE");
|
|
}
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
};
|
|
|
|
match lora.sleep(&mut delay).await {
|
|
Ok(()) => info!("Sleep successful"),
|
|
Err(err) => info!("Sleep unsuccessful = {}", err),
|
|
}
|
|
}
|