56 lines
3.2 KiB
Markdown
56 lines
3.2 KiB
Markdown
|
# SPE ADIN1110 `embassy-net` integration
|
||
|
|
|
||
|
|
[`embassy-net`](https://crates.io/crates/embassy-net) integration for the `Analog ADIN1110` SPI SPE ethernet chips.
|
||
|
|
|
||
|
|
## What is SPE or Single Pair Ethernet / 10 BASE-T1L
|
||
|
|
|
||
|
|
SPE is Single Pair Ethernet, what the names implies, it uses a single twisted/differancial pair (only 2 wires) to transmit ethernet packet in full-duplex.
|
||
|
|
SPE is still ethernet, only the phissical layer is different.
|
||
|
|
|
||
|
|
SPE also supports [`PoDL(Power over Data Line)`](https://www.ti.com/lit/an/snla395/snla395.pdf), power delivery from 0.5 up to 50 Watts, similair to [`PoE`](https://en.wikipedia.org/wiki/Power_over_Ethernet), but additional hardware and handshake protocol is needed.
|
||
|
|
|
||
|
|
SPE has many link speeds but only `10 BASE-T1L` is able to reach cable length up to 1000 meters in `2.4 Vpp` transmit amplitude.
|
||
|
|
Currently in 2023, none of the standards are compatiable with eachother.
|
||
|
|
So `10 BASE-T1L` don't work with a `10 BASE-T1S` or `100 BASE-T1`.
|
||
|
|
|
||
|
|
In the industry SPE is also called [`APL(Advanced Physical Layer)`](https://www.ethernet-apl.org), it is based on the `10 BASE-T1L` standard.
|
||
|
|
|
||
|
|
APL can be use in [`intrinsic safety applications/explosion hazardous areas`](https://en.wikipedia.org/wiki/Electrical_equipment_in_hazardous_areas) which has it's own name and standard [`2-WISE(2-wire intrinsically safe ethernet) IEC TS 60079-47:2021`](https://webstore.iec.ch/publication/64292).
|
||
|
|
|
||
|
|
`10 BASE-T1L` and `ADIN1110` are designed to support intrinsic safety applications. The power supply energy is fixed and PDoL is not supported.
|
||
|
|
|
||
|
|
## Supported SPI modes
|
||
|
|
|
||
|
|
`ADIN1110` supports two SPI modes. `Generic` and [`OPEN Alliance 10BASE-T1x MAC-PHY serial interface`](https://opensig.org/download/document/OPEN_Alliance_10BASET1x_MAC-PHY_Serial_Interface_V1.1.pdf)
|
||
|
|
|
||
|
|
Both modes support with and without additional CRC.
|
||
|
|
Currently only `Generic` SPI with or without CRC is supported.
|
||
|
|
|
||
|
|
*NOTE:* SPI Mode is selected by the hardware pins `SPI_CFG0` and `SPI_CFG1`. Software can't detect nor change the mode.
|
||
|
|
|
||
|
|
## Hardware
|
||
|
|
|
||
|
|
- Testen on [`Analog Devices EVAL-ADIN1110EBZ`](https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/eval-adin1110.html) with a `STM32L4S5QII3P`, see [`spe_adin1110_http_server`](../examples/stm32l4/src/bin/spe_adin1110_http_server.rs) example.
|
||
|
|
- [`SparkFun MicroMod Single Pair Ethernet Function Board`](https://www.sparkfun.com/products/19038) or [`SparkFun MicroMod Single Pair Ethernet Kit`](https://www.sparkfun.com/products/19628), the kit supports multiple microcontrollers, please check if get the right microcontroller that is supported by Embassy!
|
||
|
|
|
||
|
|
## Other SPE chips
|
||
|
|
|
||
|
|
* [`Analog ADIN2111`](https://www.analog.com/en/products/adin2111.html) 2 Port SPI version. Can work with this driver.
|
||
|
|
* [`Analog ADIN1100`](https://www.analog.com/en/products/adin1100.html) RGMII version.
|
||
|
|
|
||
|
|
## Testing
|
||
|
|
|
||
|
|
ADIN1110 library can tested on the host with a mock SPI driver
|
||
|
|
|
||
|
|
$ `cargo test --target x86_64-unknown-linux-gnu`
|
||
|
|
|
||
|
|
## License
|
||
|
|
|
||
|
|
This work is licensed under either of
|
||
|
|
|
||
|
|
- Apache License, Version 2.0 ([LICENSE-APACHE](LICENSE-APACHE) or
|
||
|
|
http://www.apache.org/licenses/LICENSE-2.0)
|
||
|
|
- MIT license ([LICENSE-MIT](LICENSE-MIT) or http://opensource.org/licenses/MIT)
|
||
|
|
|
||
|
|
at your option.
|