max/embassy
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

better not as a constructor?

Browse Source
This commit is contained in:
Jacob Rosenthal 2021-11-01 08:54:07 -07:00
parent 90be851e4b
commit 12b2c5d5f7
3 changed files with 22 additions and 60 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

60
embassy-nrf/src/pwm.rs
View File

@ -55,7 +55,7 @@ pub struct Pwm<'d, T: Instance> {
}
#[derive(Debug, Eq, PartialEq, Clone, Copy)]
pub enum LoopMode {
pub enum SequenceMode {
/// Run sequence n Times total
Times(u16),
/// Repeat until `stop` is called.
@ -63,7 +63,7 @@ pub enum LoopMode {
}
/// Configure an infinite looping sequence for `simple_playback`
pub struct LoopingConfig<'a> {
pub struct SequenceConfig<'a> {
/// Selects up mode or up-and-down mode for the counter
pub counter_mode: CounterMode,
// Top value to be compared against buffer values
@ -79,7 +79,7 @@ pub struct LoopingConfig<'a> {
/// Number of Times PWM periods after the sequence ends before starting the next sequence
pub end_delay: u32,
/// How many times to play the sequence
pub times: LoopMode,
pub times: SequenceMode,
}
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
@ -132,6 +132,9 @@ impl<'d, T: Instance> Pwm<'d, T> {
pin.set_low();
pin.conf().write(|w| w.dir().output());
}
// if NoPin provided writes disconnected (top bit 1) 0x80000000 else
// writes pin number ex 13 (0x0D) which is connected (top bit 0)
r.psel.out[0].write(|w| unsafe { w.bits(ch0.psel_bits()) });
r.psel.out[1].write(|w| unsafe { w.bits(ch1.psel_bits()) });
r.psel.out[2].write(|w| unsafe { w.bits(ch2.psel_bits()) });
@ -166,54 +169,18 @@ impl<'d, T: Instance> Pwm<'d, T> {
}
/// Returns a configured pwm that has had start called on it
pub fn simple_playback(
_pwm: impl Unborrow<Target = T> + 'd,
ch0: impl Unborrow<Target = impl GpioOptionalPin> + 'd,
ch1: impl Unborrow<Target = impl GpioOptionalPin> + 'd,
ch2: impl Unborrow<Target = impl GpioOptionalPin> + 'd,
ch3: impl Unborrow<Target = impl GpioOptionalPin> + 'd,
config: LoopingConfig,
) -> Result<Self, Error> {
pub fn play_sequence(&self, config: SequenceConfig) -> Result<(), Error> {
slice_in_ram_or(config.sequence, Error::DMABufferNotInDataMemory)?;
if config.sequence.len() > 32767 {
return Err(Error::SequenceTooLong);
}
if let LoopMode::Times(0) = config.times {
if let SequenceMode::Times(0) = config.times {
return Err(Error::SequenceTooShort);
}
unborrow!(ch0, ch1, ch2, ch3);
let r = T::regs();
if let Some(pin) = ch0.pin_mut() {
pin.set_low();
pin.conf().write(|w| w.dir().output());
}
if let Some(pin) = ch1.pin_mut() {
pin.set_low();
pin.conf().write(|w| w.dir().output());
}
if let Some(pin) = ch2.pin_mut() {
pin.set_low();
pin.conf().write(|w| w.dir().output());
}
if let Some(pin) = ch3.pin_mut() {
pin.set_low();
pin.conf().write(|w| w.dir().output());
}
// if NoPin provided writes disconnected (top bit 1) 0x80000000 else
// writes pin number ex 13 (0x0D) which is connected (top bit 0)
r.psel.out[0].write(|w| unsafe { w.bits(ch0.psel_bits()) });
r.psel.out[1].write(|w| unsafe { w.bits(ch1.psel_bits()) });
r.psel.out[2].write(|w| unsafe { w.bits(ch2.psel_bits()) });
r.psel.out[3].write(|w| unsafe { w.bits(ch3.psel_bits()) });
r.enable.write(|w| w.enable().enabled());
r.mode
.write(|w| unsafe { w.bits(config.counter_mode as u32) });
r.prescaler
@ -250,7 +217,7 @@ impl<'d, T: Instance> Pwm<'d, T> {
match config.times {
// just the one time, no loop count
LoopMode::Times(1) => {
SequenceMode::Times(1) => {
r.loop_.write(|w| w.cnt().disabled());
// tasks_seqstart doesnt exist in all svds so write its bit instead
r.tasks_seqstart[0].write(|w| unsafe { w.bits(0x01) });
@ -258,7 +225,7 @@ impl<'d, T: Instance> Pwm<'d, T> {
// loop count is how many times to play BOTH sequences
// 2 total (1 x 2)
// 3 total, (2 x 2) - 1
LoopMode::Times(n) => {
SequenceMode::Times(n) => {
let odd = n & 1 == 1;
let times = if odd { (n / 2) + 1 } else { n / 2 };
@ -273,17 +240,14 @@ impl<'d, T: Instance> Pwm<'d, T> {
}
}
// to play infinitely, repeat the sequence one time, then have loops done self trigger seq0 again
LoopMode::Infinite => {
SequenceMode::Infinite => {
r.loop_.write(|w| unsafe { w.cnt().bits(0x1) });
r.shorts.write(|w| w.loopsdone_seqstart0().enabled());
// tasks_seqstart doesnt exist in all svds so write its bit instead
r.tasks_seqstart[0].write(|w| unsafe { w.bits(0x01) });
}
}
Ok(Self {
phantom: PhantomData,
})
Ok(())
}
/// Stop playback

11
examples/nrf/src/bin/pwm_sequence.rs
View File

@ -7,7 +7,7 @@ mod example_common;
use defmt::*;
use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_nrf::pwm::{CounterMode, LoopMode, LoopingConfig, Prescaler, Pwm, SequenceLoad};
use embassy_nrf::pwm::{CounterMode, Prescaler, Pwm, SequenceConfig, SequenceLoad, SequenceMode};
use embassy_nrf::Peripherals;
#[embassy::main]
@ -16,7 +16,7 @@ async fn main(_spawner: Spawner, p: Peripherals) {
0x8000, 0, 0, 0, 0, 0x8000, 0, 0, 0, 0, 0x8000, 0, 0, 0, 0, 0x8000,
];
let config = LoopingConfig {
let config = SequenceConfig {
counter_mode: CounterMode::Up,
top: 15625,
prescaler: Prescaler::Div128,
@ -24,12 +24,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
sequence_load: SequenceLoad::Individual,
refresh: 0,
end_delay: 0,
times: LoopMode::Times(5),
times: SequenceMode::Times(5),
};
let _pwm = unwrap!(Pwm::simple_playback(
p.PWM0, p.P0_13, p.P0_15, p.P0_16, p.P0_14, config
));
let pwm = Pwm::new(p.PWM0, p.P0_13, p.P0_15, p.P0_16, p.P0_14);
unwrap!(pwm.play_sequence(config));
info!("pwm started!");
loop {

11
examples/nrf/src/bin/pwm_simple_sin.rs
View File

@ -9,7 +9,7 @@ use defmt::*;
use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_nrf::gpio::NoPin;
use embassy_nrf::pwm::{CounterMode, LoopMode, LoopingConfig, Prescaler, Pwm, SequenceLoad};
use embassy_nrf::pwm::{CounterMode, Prescaler, Pwm, SequenceConfig, SequenceLoad, SequenceMode};
use embassy_nrf::Peripherals;
use micromath::F32Ext;
@ -20,7 +20,7 @@ async fn main(_spawner: Spawner, p: Peripherals) {
// probably not best use of resources to create the table at runtime, but makes testing fast
let seq_values: [u16; 220] = core::array::from_fn(|n| ((W1 * n as f32).sin() * 10000.0) as u16);
let config = LoopingConfig {
let config = SequenceConfig {
counter_mode: CounterMode::UpAndDown,
top: 12000,
prescaler: Prescaler::Div16,
@ -28,12 +28,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
sequence_load: SequenceLoad::Common,
refresh: 0,
end_delay: 0,
times: LoopMode::Infinite,
times: SequenceMode::Infinite,
};
let pwm = unwrap!(Pwm::simple_playback(
p.PWM0, p.P0_13, NoPin, NoPin, NoPin, config
));
let pwm = Pwm::new(p.PWM0, p.P0_13, NoPin, NoPin, NoPin);
unwrap!(pwm.play_sequence(config));
info!("pwm started!");
Timer::after(Duration::from_millis(20000)).await;