581: stm32: expose all functionality as inherent methods. r=Dirbaio a=Dirbaio

This is the previous step to implementing both the embedded-hal 0.2 and embedded-hal 1.0 + embedded-hal-async traits.

The equivalent in nrf was done in #552 

- Removes need for `unwrap` in gpio.
- Removes need for `use embedded_hal::whatever` in all cases.

Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
This commit is contained in:
bors[bot] 2022-01-19 20:47:07 +00:00 committed by GitHub
commit 6b0cb0609b
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
78 changed files with 739 additions and 587 deletions

View File

@ -16,7 +16,6 @@ use embassy_stm32::{
TxParams,
},
};
use embedded_hal::digital::v2::OutputPin;
use lorawan_device::async_device::{
radio::{Bandwidth, PhyRxTx, RfConfig, RxQuality, SpreadingFactor, TxConfig},
Timings,
@ -329,22 +328,22 @@ impl<'a> RadioSwitch<'a> {
}
pub(crate) fn set_rx(&mut self) {
self.ctrl1.set_high().unwrap();
self.ctrl2.set_low().unwrap();
self.ctrl3.set_high().unwrap();
self.ctrl1.set_high();
self.ctrl2.set_low();
self.ctrl3.set_high();
}
pub(crate) fn set_tx_lp(&mut self) {
self.ctrl1.set_high().unwrap();
self.ctrl2.set_high().unwrap();
self.ctrl3.set_high().unwrap();
self.ctrl1.set_high();
self.ctrl2.set_high();
self.ctrl3.set_high();
}
#[allow(dead_code)]
pub(crate) fn set_tx_hp(&mut self) {
self.ctrl2.set_high().unwrap();
self.ctrl1.set_low().unwrap();
self.ctrl3.set_high().unwrap();
self.ctrl2.set_high();
self.ctrl1.set_low();
self.ctrl3.set_high();
}
}

View File

@ -1,2 +0,0 @@
[pep8]
max_line_length = 255

View File

@ -89,7 +89,8 @@ pac::dma_channels! {
($channel_peri:ident, $dma_peri:ident, bdma, $channel_num:expr, $dmamux:tt) => {
impl crate::dma::sealed::Channel for crate::peripherals::$channel_peri {
unsafe fn start_write<W: Word>(&mut self, request: Request, buf: &[W], reg_addr: *mut W) {
unsafe fn start_write<W: Word>(&mut self, request: Request, buf: *const[W], reg_addr: *mut W) {
let (ptr, len) = super::slice_ptr_parts(buf);
low_level_api::start_transfer(
pac::$dma_peri,
$channel_num,
@ -97,8 +98,8 @@ pac::dma_channels! {
request,
vals::Dir::FROMMEMORY,
reg_addr as *const u32,
buf.as_ptr() as *mut u32,
buf.len(),
ptr as *mut u32,
len,
true,
vals::Size::from(W::bits()),
#[cfg(dmamux)]
@ -129,7 +130,8 @@ pac::dma_channels! {
)
}
unsafe fn start_read<W: Word>(&mut self, request: Request, reg_addr: *mut W, buf: &mut [W]) {
unsafe fn start_read<W: Word>(&mut self, request: Request, reg_addr: *const W, buf: *mut [W]) {
let (ptr, len) = super::slice_ptr_parts_mut(buf);
low_level_api::start_transfer(
pac::$dma_peri,
$channel_num,
@ -137,8 +139,8 @@ pac::dma_channels! {
request,
vals::Dir::FROMPERIPHERAL,
reg_addr as *const u32,
buf.as_ptr() as *mut u32,
buf.len(),
ptr as *mut u32,
len,
true,
vals::Size::from(W::bits()),
#[cfg(dmamux)]

View File

@ -84,15 +84,16 @@ pub(crate) unsafe fn init() {
pac::dma_channels! {
($channel_peri:ident, $dma_peri:ident, dma, $channel_num:expr, $dmamux:tt) => {
impl crate::dma::sealed::Channel for crate::peripherals::$channel_peri {
unsafe fn start_write<W: Word>(&mut self, request: Request, buf: &[W], reg_addr: *mut W) {
unsafe fn start_write<W: Word>(&mut self, request: Request, buf: *const [W], reg_addr: *mut W) {
let (ptr, len) = super::slice_ptr_parts(buf);
low_level_api::start_transfer(
pac::$dma_peri,
$channel_num,
request,
vals::Dir::MEMORYTOPERIPHERAL,
reg_addr as *const u32,
buf.as_ptr() as *mut u32,
buf.len(),
ptr as *mut u32,
len,
true,
vals::Size::from(W::bits()),
#[cfg(dmamux)]
@ -121,15 +122,16 @@ pac::dma_channels! {
)
}
unsafe fn start_read<W: Word>(&mut self, request: Request, reg_addr: *mut W, buf: &mut [W]) {
unsafe fn start_read<W: Word>(&mut self, request: Request, reg_addr: *const W, buf: *mut [W]) {
let (ptr, len) = super::slice_ptr_parts_mut(buf);
low_level_api::start_transfer(
pac::$dma_peri,
$channel_num,
request,
vals::Dir::PERIPHERALTOMEMORY,
reg_addr as *const u32,
buf.as_ptr() as *mut u32,
buf.len(),
ptr as *mut u32,
len,
true,
vals::Size::from(W::bits()),
#[cfg(dmamux)]

View File

@ -10,6 +10,7 @@ pub use dmamux::*;
use core::future::Future;
use core::marker::PhantomData;
use core::mem;
use core::pin::Pin;
use core::task::Waker;
use core::task::{Context, Poll};
@ -36,12 +37,13 @@ pub(crate) mod sealed {
/// Starts this channel for writing a stream of words.
///
/// Safety:
/// - `buf` must point to a valid buffer for DMA reading.
/// - `buf` must be alive for the entire duration of the DMA transfer.
/// - `reg_addr` must be a valid peripheral register address to write to.
unsafe fn start_write<W: super::Word>(
&mut self,
request: Request,
buf: &[W],
buf: *const [W],
reg_addr: *mut W,
);
@ -60,13 +62,14 @@ pub(crate) mod sealed {
/// Starts this channel for reading a stream of words.
///
/// Safety:
/// - `buf` must point to a valid buffer for DMA writing.
/// - `buf` must be alive for the entire duration of the DMA transfer.
/// - `reg_addr` must be a valid peripheral register address to write to.
/// - `reg_addr` must be a valid peripheral register address to read from.
unsafe fn start_read<W: super::Word>(
&mut self,
request: Request,
reg_addr: *mut W,
buf: &mut [W],
reg_addr: *const W,
buf: *mut [W],
);
/// Requests the channel to stop.
@ -132,10 +135,7 @@ mod transfers {
unsafe { channel.start_read::<W>(request, reg_addr, buf) };
Transfer {
channel,
_phantom: PhantomData,
}
Transfer::new(channel)
}
#[allow(unused)]
@ -150,10 +150,7 @@ mod transfers {
unsafe { channel.start_write::<W>(request, buf, reg_addr) };
Transfer {
channel,
_phantom: PhantomData,
}
Transfer::new(channel)
}
#[allow(unused)]
@ -168,17 +165,24 @@ mod transfers {
unsafe { channel.start_write_repeated::<W>(request, repeated, count, reg_addr) };
Transfer {
channel,
_phantom: PhantomData,
}
Transfer::new(channel)
}
struct Transfer<'a, C: Channel> {
pub(crate) struct Transfer<'a, C: Channel> {
channel: C,
_phantom: PhantomData<&'a mut C>,
}
impl<'a, C: Channel> Transfer<'a, C> {
pub(crate) fn new(channel: impl Unborrow<Target = C> + 'a) -> Self {
unborrow!(channel);
Self {
channel,
_phantom: PhantomData,
}
}
}
impl<'a, C: Channel> Drop for Transfer<'a, C> {
fn drop(&mut self) {
self.channel.request_stop();
@ -221,3 +225,14 @@ pub(crate) unsafe fn init() {
#[cfg(dmamux)]
dmamux::init();
}
// TODO: replace transmutes with core::ptr::metadata once it's stable
#[allow(unused)]
pub(crate) fn slice_ptr_parts<T>(slice: *const [T]) -> (usize, usize) {
unsafe { mem::transmute(slice) }
}
#[allow(unused)]
pub(crate) fn slice_ptr_parts_mut<T>(slice: *mut [T]) -> (usize, usize) {
unsafe { mem::transmute(slice) }
}

View File

@ -3,7 +3,9 @@ use core::future::Future;
use core::marker::PhantomData;
use core::pin::Pin;
use core::task::{Context, Poll};
use embassy::traits::gpio::{WaitForAnyEdge, WaitForFallingEdge, WaitForRisingEdge};
use embassy::traits::gpio::{
WaitForAnyEdge, WaitForFallingEdge, WaitForHigh, WaitForLow, WaitForRisingEdge,
};
use embassy::util::Unborrow;
use embassy::waitqueue::AtomicWaker;
use embassy_hal_common::unsafe_impl_unborrow;
@ -94,17 +96,75 @@ impl<'d, T: GpioPin> ExtiInput<'d, T> {
pub fn new(pin: Input<'d, T>, _ch: impl Unborrow<Target = T::ExtiChannel> + 'd) -> Self {
Self { pin }
}
pub fn is_high(&self) -> bool {
self.pin.is_high()
}
pub fn is_low(&self) -> bool {
self.pin.is_low()
}
pub async fn wait_for_high<'a>(&'a mut self) {
let fut = ExtiInputFuture::new(self.pin.pin.pin(), self.pin.pin.port(), true, false);
if self.is_high() {
return;
}
fut.await
}
pub async fn wait_for_low<'a>(&'a mut self) {
let fut = ExtiInputFuture::new(self.pin.pin.pin(), self.pin.pin.port(), false, true);
if self.is_low() {
return;
}
fut.await
}
pub async fn wait_for_rising_edge<'a>(&'a mut self) {
ExtiInputFuture::new(self.pin.pin.pin(), self.pin.pin.port(), true, false).await
}
pub async fn wait_for_falling_edge<'a>(&'a mut self) {
ExtiInputFuture::new(self.pin.pin.pin(), self.pin.pin.port(), false, true).await
}
pub async fn wait_for_any_edge<'a>(&'a mut self) {
ExtiInputFuture::new(self.pin.pin.pin(), self.pin.pin.port(), true, true).await
}
}
impl<'d, T: GpioPin> InputPin for ExtiInput<'d, T> {
type Error = Infallible;
fn is_high(&self) -> Result<bool, Self::Error> {
self.pin.is_high()
Ok(self.is_high())
}
fn is_low(&self) -> Result<bool, Self::Error> {
self.pin.is_low()
Ok(self.is_low())
}
}
impl<'d, T: GpioPin> WaitForHigh for ExtiInput<'d, T> {
type Future<'a>
where
Self: 'a,
= impl Future<Output = ()> + 'a;
fn wait_for_high<'a>(&'a mut self) -> Self::Future<'a> {
self.wait_for_high()
}
}
impl<'d, T: GpioPin> WaitForLow for ExtiInput<'d, T> {
type Future<'a>
where
Self: 'a,
= impl Future<Output = ()> + 'a;
fn wait_for_low<'a>(&'a mut self) -> Self::Future<'a> {
self.wait_for_low()
}
}
@ -112,10 +172,10 @@ impl<'d, T: GpioPin> WaitForRisingEdge for ExtiInput<'d, T> {
type Future<'a>
where
Self: 'a,
= ExtiInputFuture<'a>;
= impl Future<Output = ()> + 'a;
fn wait_for_rising_edge<'a>(&'a mut self) -> Self::Future<'a> {
ExtiInputFuture::new(self.pin.pin.pin(), self.pin.pin.port(), true, false)
self.wait_for_rising_edge()
}
}
@ -123,10 +183,10 @@ impl<'d, T: GpioPin> WaitForFallingEdge for ExtiInput<'d, T> {
type Future<'a>
where
Self: 'a,
= ExtiInputFuture<'a>;
= impl Future<Output = ()> + 'a;
fn wait_for_falling_edge<'a>(&'a mut self) -> Self::Future<'a> {
ExtiInputFuture::new(self.pin.pin.pin(), self.pin.pin.port(), false, true)
self.wait_for_falling_edge()
}
}
@ -134,21 +194,21 @@ impl<'d, T: GpioPin> WaitForAnyEdge for ExtiInput<'d, T> {
type Future<'a>
where
Self: 'a,
= ExtiInputFuture<'a>;
= impl Future<Output = ()> + 'a;
fn wait_for_any_edge<'a>(&'a mut self) -> Self::Future<'a> {
ExtiInputFuture::new(self.pin.pin.pin(), self.pin.pin.port(), true, true)
self.wait_for_any_edge()
}
}
pub struct ExtiInputFuture<'a> {
struct ExtiInputFuture<'a> {
pin: u8,
phantom: PhantomData<&'a mut AnyPin>,
}
impl<'a> ExtiInputFuture<'a> {
fn new(pin: u8, port: u8, rising: bool, falling: bool) -> Self {
cortex_m::interrupt::free(|_| unsafe {
critical_section::with(|_| unsafe {
let pin = pin as usize;
exticr_regs()
.exticr(pin / 4)
@ -177,7 +237,7 @@ impl<'a> ExtiInputFuture<'a> {
impl<'a> Drop for ExtiInputFuture<'a> {
fn drop(&mut self) {
cortex_m::interrupt::free(|_| unsafe {
critical_section::with(|_| unsafe {
let pin = self.pin as _;
cpu_regs().imr(0).modify(|w| w.set_line(pin, false));
});

View File

@ -3,7 +3,7 @@ use core::convert::Infallible;
use core::marker::PhantomData;
use embassy::util::Unborrow;
use embassy_hal_common::{unborrow, unsafe_impl_unborrow};
use embedded_hal::digital::v2::{toggleable, InputPin, OutputPin, StatefulOutputPin};
use embedded_hal::digital::v2::{InputPin, OutputPin, StatefulOutputPin, ToggleableOutputPin};
use crate::pac;
use crate::pac::gpio::{self, vals};
@ -80,7 +80,7 @@ impl<'d, T: Pin> Input<'d, T> {
pub fn new(pin: impl Unborrow<Target = T> + 'd, pull: Pull) -> Self {
unborrow!(pin);
cortex_m::interrupt::free(|_| unsafe {
critical_section::with(|_| unsafe {
let r = pin.block();
let n = pin.pin() as usize;
#[cfg(gpio_v1)]
@ -113,11 +113,20 @@ impl<'d, T: Pin> Input<'d, T> {
phantom: PhantomData,
}
}
pub fn is_high(&self) -> bool {
!self.is_low()
}
pub fn is_low(&self) -> bool {
let state = unsafe { self.pin.block().idr().read().idr(self.pin.pin() as _) };
state == vals::Idr::LOW
}
}
impl<'d, T: Pin> Drop for Input<'d, T> {
fn drop(&mut self) {
cortex_m::interrupt::free(|_| unsafe {
critical_section::with(|_| unsafe {
let r = self.pin.block();
let n = self.pin.pin() as usize;
#[cfg(gpio_v1)]
@ -132,19 +141,6 @@ impl<'d, T: Pin> Drop for Input<'d, T> {
}
}
impl<'d, T: Pin> InputPin for Input<'d, T> {
type Error = Infallible;
fn is_high(&self) -> Result<bool, Self::Error> {
self.is_low().map(|v| !v)
}
fn is_low(&self) -> Result<bool, Self::Error> {
let state = unsafe { self.pin.block().idr().read().idr(self.pin.pin() as _) };
Ok(state == vals::Idr::LOW)
}
}
/// Digital input or output level.
#[derive(Debug, Eq, PartialEq)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
@ -168,7 +164,7 @@ impl<'d, T: Pin> Output<'d, T> {
Level::Low => pin.set_low(),
}
cortex_m::interrupt::free(|_| unsafe {
critical_section::with(|_| unsafe {
let r = pin.block();
let n = pin.pin() as usize;
#[cfg(gpio_v1)]
@ -191,11 +187,41 @@ impl<'d, T: Pin> Output<'d, T> {
phantom: PhantomData,
}
}
/// Set the output as high.
pub fn set_high(&mut self) {
self.pin.set_high();
}
/// Set the output as low.
pub fn set_low(&mut self) {
self.pin.set_low();
}
/// Is the output pin set as high?
pub fn is_set_high(&self) -> bool {
!self.is_set_low()
}
/// Is the output pin set as low?
pub fn is_set_low(&self) -> bool {
let state = unsafe { self.pin.block().odr().read().odr(self.pin.pin() as _) };
state == vals::Odr::LOW
}
/// Toggle pin output
pub fn toggle(&mut self) {
if self.is_set_low() {
self.set_high()
} else {
self.set_low()
}
}
}
impl<'d, T: Pin> Drop for Output<'d, T> {
fn drop(&mut self) {
cortex_m::interrupt::free(|_| unsafe {
critical_section::with(|_| unsafe {
let r = self.pin.block();
let n = self.pin.pin() as usize;
#[cfg(gpio_v1)]
@ -214,37 +240,6 @@ impl<'d, T: Pin> Drop for Output<'d, T> {
}
}
impl<'d, T: Pin> OutputPin for Output<'d, T> {
type Error = Infallible;
/// Set the output as high.
fn set_high(&mut self) -> Result<(), Self::Error> {
self.pin.set_high();
Ok(())
}
/// Set the output as low.
fn set_low(&mut self) -> Result<(), Self::Error> {
self.pin.set_low();
Ok(())
}
}
impl<'d, T: Pin> StatefulOutputPin for Output<'d, T> {
/// Is the output pin set as high?
fn is_set_high(&self) -> Result<bool, Self::Error> {
self.is_set_low().map(|v| !v)
}
/// Is the output pin set as low?
fn is_set_low(&self) -> Result<bool, Self::Error> {
let state = unsafe { self.pin.block().odr().read().odr(self.pin.pin() as _) };
Ok(state == vals::Odr::LOW)
}
}
impl<'d, T: Pin> toggleable::Default for Output<'d, T> {}
/// GPIO output open-drain driver.
pub struct OutputOpenDrain<'d, T: Pin> {
pub(crate) pin: T,
@ -265,7 +260,7 @@ impl<'d, T: Pin> OutputOpenDrain<'d, T> {
Level::Low => pin.set_low(),
}
cortex_m::interrupt::free(|_| unsafe {
critical_section::with(|_| unsafe {
let r = pin.block();
let n = pin.pin() as usize;
#[cfg(gpio_v1)]
@ -294,11 +289,50 @@ impl<'d, T: Pin> OutputOpenDrain<'d, T> {
phantom: PhantomData,
}
}
pub fn is_high(&self) -> bool {
!self.is_low()
}
pub fn is_low(&self) -> bool {
let state = unsafe { self.pin.block().idr().read().idr(self.pin.pin() as _) };
state == vals::Idr::LOW
}
/// Set the output as high.
pub fn set_high(&mut self) {
self.pin.set_high();
}
/// Set the output as low.
pub fn set_low(&mut self) {
self.pin.set_low();
}
/// Is the output pin set as high?
pub fn is_set_high(&self) -> bool {
!self.is_set_low()
}
/// Is the output pin set as low?
pub fn is_set_low(&self) -> bool {
let state = unsafe { self.pin.block().odr().read().odr(self.pin.pin() as _) };
state == vals::Odr::LOW
}
/// Toggle pin output
pub fn toggle(&mut self) {
if self.is_set_low() {
self.set_high()
} else {
self.set_low()
}
}
}
impl<'d, T: Pin> Drop for OutputOpenDrain<'d, T> {
fn drop(&mut self) {
cortex_m::interrupt::free(|_| unsafe {
critical_section::with(|_| unsafe {
let r = self.pin.block();
let n = self.pin.pin() as usize;
#[cfg(gpio_v1)]
@ -317,36 +351,6 @@ impl<'d, T: Pin> Drop for OutputOpenDrain<'d, T> {
}
}
impl<'d, T: Pin> OutputPin for OutputOpenDrain<'d, T> {
type Error = Infallible;
/// Set the output as high.
fn set_high(&mut self) -> Result<(), Self::Error> {
self.pin.set_high();
Ok(())
}
/// Set the output as low.
fn set_low(&mut self) -> Result<(), Self::Error> {
self.pin.set_low();
Ok(())
}
}
impl<'d, T: Pin> InputPin for OutputOpenDrain<'d, T> {
type Error = Infallible;
fn is_high(&self) -> Result<bool, Self::Error> {
self.is_low().map(|v| !v)
}
fn is_low(&self) -> Result<bool, Self::Error> {
// NOTE(safety) Atomic read
let state = unsafe { self.pin.block().idr().read().idr(self.pin.pin() as usize) };
Ok(state == vals::Idr::LOW)
}
}
pub(crate) mod sealed {
use super::*;
@ -612,3 +616,79 @@ pub(crate) unsafe fn init() {
};
}
}
mod eh02 {
use super::*;
impl<'d, T: Pin> InputPin for Input<'d, T> {
type Error = Infallible;
fn is_high(&self) -> Result<bool, Self::Error> {
Ok(self.is_high())
}
fn is_low(&self) -> Result<bool, Self::Error> {
Ok(self.is_low())
}
}
impl<'d, T: Pin> OutputPin for Output<'d, T> {
type Error = Infallible;
fn set_high(&mut self) -> Result<(), Self::Error> {
Ok(self.set_high())
}
fn set_low(&mut self) -> Result<(), Self::Error> {
Ok(self.set_low())
}
}
impl<'d, T: Pin> StatefulOutputPin for Output<'d, T> {
fn is_set_high(&self) -> Result<bool, Self::Error> {
Ok(self.is_set_high())
}
/// Is the output pin set as low?
fn is_set_low(&self) -> Result<bool, Self::Error> {
Ok(self.is_set_low())
}
}
impl<'d, T: Pin> ToggleableOutputPin for Output<'d, T> {
type Error = Infallible;
fn toggle(&mut self) -> Result<(), Self::Error> {
Ok(self.toggle())
}
}
impl<'d, T: Pin> OutputPin for OutputOpenDrain<'d, T> {
type Error = Infallible;
fn set_high(&mut self) -> Result<(), Self::Error> {
Ok(self.set_high())
}
fn set_low(&mut self) -> Result<(), Self::Error> {
Ok(self.set_low())
}
}
impl<'d, T: Pin> StatefulOutputPin for OutputOpenDrain<'d, T> {
fn is_set_high(&self) -> Result<bool, Self::Error> {
Ok(self.is_set_high())
}
/// Is the output pin set as low?
fn is_set_low(&self) -> Result<bool, Self::Error> {
Ok(self.is_set_low())
}
}
impl<'d, T: Pin> ToggleableOutputPin for OutputOpenDrain<'d, T> {
type Error = Infallible;
fn toggle(&mut self) -> Result<(), Self::Error> {
Ok(self.toggle())
}
}
}

View File

@ -3,9 +3,6 @@ use crate::time::Hertz;
use core::marker::PhantomData;
use embassy::util::Unborrow;
use embassy_hal_common::unborrow;
use embedded_hal::blocking::i2c::Read;
use embedded_hal::blocking::i2c::Write;
use embedded_hal::blocking::i2c::WriteRead;
use crate::pac::i2c;
@ -179,12 +176,8 @@ impl<'d, T: Instance> I2c<'d, T> {
let value = T::regs().dr().read().dr();
Ok(value)
}
}
impl<'d, T: Instance> Read for I2c<'d, T> {
type Error = Error;
fn read(&mut self, addr: u8, buffer: &mut [u8]) -> Result<(), Self::Error> {
pub fn blocking_read(&mut self, addr: u8, buffer: &mut [u8]) -> Result<(), Error> {
if let Some((last, buffer)) = buffer.split_last_mut() {
// Send a START condition and set ACK bit
unsafe {
@ -248,12 +241,8 @@ impl<'d, T: Instance> Read for I2c<'d, T> {
Err(Error::Overrun)
}
}
}
impl<'d, T: Instance> Write for I2c<'d, T> {
type Error = Error;
fn write(&mut self, addr: u8, bytes: &[u8]) -> Result<(), Self::Error> {
pub fn blocking_write(&mut self, addr: u8, bytes: &[u8]) -> Result<(), Error> {
unsafe {
self.write_bytes(addr, bytes)?;
// Send a STOP condition
@ -267,16 +256,41 @@ impl<'d, T: Instance> Write for I2c<'d, T> {
// Fallthrough is success
Ok(())
}
pub fn blocking_write_read(
&mut self,
addr: u8,
bytes: &[u8],
buffer: &mut [u8],
) -> Result<(), Error> {
unsafe { self.write_bytes(addr, bytes)? };
self.blocking_read(addr, buffer)?;
Ok(())
}
}
impl<'d, T: Instance> WriteRead for I2c<'d, T> {
impl<'d, T: Instance> embedded_hal::blocking::i2c::Read for I2c<'d, T> {
type Error = Error;
fn read(&mut self, addr: u8, buffer: &mut [u8]) -> Result<(), Self::Error> {
self.blocking_read(addr, buffer)
}
}
impl<'d, T: Instance> embedded_hal::blocking::i2c::Write for I2c<'d, T> {
type Error = Error;
fn write(&mut self, addr: u8, bytes: &[u8]) -> Result<(), Self::Error> {
self.blocking_write(addr, bytes)
}
}
impl<'d, T: Instance> embedded_hal::blocking::i2c::WriteRead for I2c<'d, T> {
type Error = Error;
fn write_read(&mut self, addr: u8, bytes: &[u8], buffer: &mut [u8]) -> Result<(), Self::Error> {
unsafe { self.write_bytes(addr, bytes)? };
self.read(addr, buffer)?;
Ok(())
self.blocking_write_read(addr, bytes, buffer)
}
}

View File

@ -10,9 +10,6 @@ use embassy::util::Unborrow;
use embassy::waitqueue::AtomicWaker;
use embassy_hal_common::drop::OnDrop;
use embassy_hal_common::unborrow;
use embedded_hal::blocking::i2c::Read;
use embedded_hal::blocking::i2c::Write;
use embedded_hal::blocking::i2c::WriteRead;
use futures::future::poll_fn;
use crate::dma::NoDma;
@ -300,7 +297,12 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
}
}
fn read(&mut self, address: u8, buffer: &mut [u8], restart: bool) -> Result<(), Error> {
fn read_internal(
&mut self,
address: u8,
buffer: &mut [u8],
restart: bool,
) -> Result<(), Error> {
let completed_chunks = buffer.len() / 255;
let total_chunks = if completed_chunks * 255 == buffer.len() {
completed_chunks
@ -339,7 +341,7 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
Ok(())
}
fn write(&mut self, address: u8, bytes: &[u8], send_stop: bool) -> Result<(), Error> {
fn write_internal(&mut self, address: u8, bytes: &[u8], send_stop: bool) -> Result<(), Error> {
let completed_chunks = bytes.len() / 255;
let total_chunks = if completed_chunks * 255 == bytes.len() {
completed_chunks
@ -568,14 +570,17 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
Ok(())
}
pub async fn write_dma(&mut self, address: u8, bytes: &[u8]) -> Result<(), Error>
// =========================
// Async public API
pub async fn write(&mut self, address: u8, bytes: &[u8]) -> Result<(), Error>
where
TXDMA: crate::i2c::TxDma<T>,
{
self.write_dma_internal(address, bytes, true, true).await
}
pub async fn write_dma_vectored(&mut self, address: u8, bytes: &[&[u8]]) -> Result<(), Error>
pub async fn write_vectored(&mut self, address: u8, bytes: &[&[u8]]) -> Result<(), Error>
where
TXDMA: crate::i2c::TxDma<T>,
{
@ -597,19 +602,52 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
Ok(())
}
pub async fn read_dma(
&mut self,
address: u8,
buffer: &mut [u8],
restart: bool,
) -> Result<(), Error>
pub async fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Error>
where
RXDMA: crate::i2c::RxDma<T>,
{
self.read_dma_internal(address, buffer, restart).await
self.read_dma_internal(address, buffer, false).await
}
pub fn write_vectored(&mut self, address: u8, bytes: &[&[u8]]) -> Result<(), Error> {
pub async fn write_read(
&mut self,
address: u8,
bytes: &[u8],
buffer: &mut [u8],
) -> Result<(), Error>
where
TXDMA: super::TxDma<T>,
RXDMA: super::RxDma<T>,
{
self.write_dma_internal(address, bytes, true, true).await?;
self.read_dma_internal(address, buffer, true).await?;
Ok(())
}
// =========================
// Blocking public API
pub fn blocking_read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Error> {
self.read_internal(address, buffer, false)
// Automatic Stop
}
pub fn blocking_write(&mut self, address: u8, bytes: &[u8]) -> Result<(), Error> {
self.write_internal(address, bytes, true)
}
pub fn blocking_write_read(
&mut self,
address: u8,
bytes: &[u8],
buffer: &mut [u8],
) -> Result<(), Error> {
self.write_internal(address, bytes, false)?;
self.read_internal(address, buffer, true)
// Automatic Stop
}
pub fn blocking_write_vectored(&mut self, address: u8, bytes: &[&[u8]]) -> Result<(), Error> {
if bytes.is_empty() {
return Err(Error::ZeroLengthTransfer);
}
@ -679,24 +717,23 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
}
}
impl<'d, T: Instance> Read for I2c<'d, T> {
impl<'d, T: Instance> embedded_hal::blocking::i2c::Read for I2c<'d, T> {
type Error = Error;
fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Self::Error> {
self.read(address, buffer, false)
// Automatic Stop
self.blocking_read(address, buffer)
}
}
impl<'d, T: Instance> Write for I2c<'d, T> {
impl<'d, T: Instance> embedded_hal::blocking::i2c::Write for I2c<'d, T> {
type Error = Error;
fn write(&mut self, address: u8, bytes: &[u8]) -> Result<(), Self::Error> {
self.write(address, bytes, true)
self.blocking_write(address, bytes)
}
}
impl<'d, T: Instance> WriteRead for I2c<'d, T> {
impl<'d, T: Instance> embedded_hal::blocking::i2c::WriteRead for I2c<'d, T> {
type Error = Error;
fn write_read(
@ -705,9 +742,7 @@ impl<'d, T: Instance> WriteRead for I2c<'d, T> {
bytes: &[u8],
buffer: &mut [u8],
) -> Result<(), Self::Error> {
self.write(address, bytes, false)?;
self.read(address, buffer, true)
// Automatic Stop
self.blocking_write_read(address, bytes, buffer)
}
}
@ -715,7 +750,7 @@ impl<'d, T: Instance> WriteRead for I2c<'d, T> {
///
/// Peripheral options for generating the STOP condition
#[derive(Copy, Clone, PartialEq)]
pub enum Stop {
enum Stop {
/// Software end mode: Must write register to generate STOP condition
Software,
/// Automatic end mode: A STOP condition is automatically generated once the
@ -860,32 +895,23 @@ impl<'d, T: Instance, TXDMA: super::TxDma<T>, RXDMA: super::RxDma<T>> I2cTrait<u
type WriteFuture<'a>
where
'd: 'a,
T: 'a,
TXDMA: 'a,
RXDMA: 'a,
Self: 'a,
= impl Future<Output = Result<(), Self::Error>> + 'a;
type ReadFuture<'a>
where
'd: 'a,
T: 'a,
TXDMA: 'a,
RXDMA: 'a,
Self: 'a,
= impl Future<Output = Result<(), Self::Error>> + 'a;
type WriteReadFuture<'a>
where
'd: 'a,
T: 'a,
TXDMA: 'a,
RXDMA: 'a,
Self: 'a,
= impl Future<Output = Result<(), Self::Error>> + 'a;
fn read<'a>(&'a mut self, address: u8, buffer: &'a mut [u8]) -> Self::ReadFuture<'a> {
self.read_dma(address, buffer, false)
self.read(address, buffer)
}
fn write<'a>(&'a mut self, address: u8, bytes: &'a [u8]) -> Self::WriteFuture<'a> {
self.write_dma(address, bytes)
self.write(address, bytes)
}
fn write_read<'a>(
@ -894,9 +920,6 @@ impl<'d, T: Instance, TXDMA: super::TxDma<T>, RXDMA: super::RxDma<T>> I2cTrait<u
bytes: &'a [u8],
buffer: &'a mut [u8],
) -> Self::WriteReadFuture<'a> {
async move {
self.write_dma(address, bytes).await?;
self.read_dma(address, buffer, true).await
}
self.write_read(address, bytes, buffer)
}
}

View File

@ -1254,7 +1254,7 @@ where
fn configure(&mut self) {
let (clk_pin, cmd_pin, d0_pin, d1_pin, d2_pin, d3_pin) = self;
cortex_m::interrupt::free(|_| unsafe {
critical_section::with(|_| unsafe {
// clk
let block = clk_pin.block();
let n = clk_pin.pin() as usize;
@ -1298,7 +1298,7 @@ where
let (clk_pin, cmd_pin, d0_pin, d1_pin, d2_pin, d3_pin) = self;
cortex_m::interrupt::free(|_| unsafe {
critical_section::with(|_| unsafe {
// clk
let n = clk_pin.pin().into();
clk_pin
@ -1400,7 +1400,7 @@ where
fn configure(&mut self) {
let (clk_pin, cmd_pin, d0_pin) = self;
cortex_m::interrupt::free(|_| unsafe {
critical_section::with(|_| unsafe {
// clk
let block = clk_pin.block();
let n = clk_pin.pin() as usize;
@ -1426,7 +1426,7 @@ where
let (clk_pin, cmd_pin, d0_pin) = self;
cortex_m::interrupt::free(|_| unsafe {
critical_section::with(|_| unsafe {
// clk
let n = clk_pin.pin().into();
clk_pin

View File

@ -1,5 +1,13 @@
#![macro_use]
use core::future::Future;
use core::marker::PhantomData;
use core::ptr;
use embassy::util::Unborrow;
use embassy_hal_common::unborrow;
use embassy_traits::spi as traits;
use self::sealed::WordSize;
use crate::dma;
use crate::dma::NoDma;
use crate::gpio::sealed::{AFType, Pin};
@ -8,19 +16,14 @@ use crate::pac::spi::{regs, vals};
use crate::peripherals;
use crate::rcc::RccPeripheral;
use crate::time::Hertz;
use core::future::Future;
use core::marker::PhantomData;
use core::ptr;
use embassy::util::Unborrow;
use embassy_hal_common::unborrow;
use embassy_traits::spi as traits;
pub use embedded_hal::spi::{Mode, Phase, Polarity, MODE_0, MODE_1, MODE_2, MODE_3};
#[cfg_attr(spi_v1, path = "v1.rs")]
#[cfg_attr(spi_f1, path = "v1.rs")]
#[cfg_attr(spi_v2, path = "v2.rs")]
#[cfg_attr(spi_v3, path = "v3.rs")]
mod _version;
pub use _version::*;
type Regs = &'static crate::pac::spi::Spi;
@ -40,54 +43,6 @@ pub enum BitOrder {
MsbFirst,
}
#[derive(Copy, Clone, PartialOrd, PartialEq)]
enum WordSize {
EightBit,
SixteenBit,
}
impl WordSize {
#[cfg(any(spi_v1, spi_f1))]
fn dff(&self) -> vals::Dff {
match self {
WordSize::EightBit => vals::Dff::EIGHTBIT,
WordSize::SixteenBit => vals::Dff::SIXTEENBIT,
}
}
#[cfg(spi_v2)]
fn ds(&self) -> vals::Ds {
match self {
WordSize::EightBit => vals::Ds::EIGHTBIT,
WordSize::SixteenBit => vals::Ds::SIXTEENBIT,
}
}
#[cfg(spi_v2)]
fn frxth(&self) -> vals::Frxth {
match self {
WordSize::EightBit => vals::Frxth::QUARTER,
WordSize::SixteenBit => vals::Frxth::HALF,
}
}
#[cfg(spi_v3)]
fn dsize(&self) -> u8 {
match self {
WordSize::EightBit => 0b0111,
WordSize::SixteenBit => 0b1111,
}
}
#[cfg(spi_v3)]
fn _frxth(&self) -> vals::Fthlv {
match self {
WordSize::EightBit => vals::Fthlv::ONEFRAME,
WordSize::SixteenBit => vals::Fthlv::ONEFRAME,
}
}
}
#[non_exhaustive]
#[derive(Copy, Clone)]
pub struct Config {
@ -379,6 +334,47 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
self.current_word_size = word_size;
}
pub async fn write(&mut self, data: &[u8]) -> Result<(), Error>
where
Tx: TxDmaChannel<T>,
{
self.write_dma_u8(data).await
}
pub async fn read(&mut self, data: &mut [u8]) -> Result<(), Error>
where
Tx: TxDmaChannel<T>,
Rx: RxDmaChannel<T>,
{
self.read_dma_u8(data).await
}
pub async fn transfer(&mut self, read: &mut [u8], write: &[u8]) -> Result<(), Error>
where
Tx: TxDmaChannel<T>,
Rx: RxDmaChannel<T>,
{
self.transfer_dma_u8(read, write).await
}
pub fn blocking_write<W: Word>(&mut self, words: &[W]) -> Result<(), Error> {
self.set_word_size(W::WORDSIZE);
let regs = T::regs();
for word in words.iter() {
let _ = transfer_word(regs, *word)?;
}
Ok(())
}
pub fn blocking_transfer_in_place<W: Word>(&mut self, words: &mut [W]) -> Result<(), Error> {
self.set_word_size(W::WORDSIZE);
let regs = T::regs();
for word in words.iter_mut() {
*word = transfer_word(regs, *word)?;
}
Ok(())
}
}
impl<'d, T: Instance, Tx, Rx> Drop for Spi<'d, T, Tx, Rx> {
@ -537,17 +533,6 @@ fn finish_dma(regs: Regs) {
}
}
trait Word {
const WORDSIZE: WordSize;
}
impl Word for u8 {
const WORDSIZE: WordSize = WordSize::EightBit;
}
impl Word for u16 {
const WORDSIZE: WordSize = WordSize::SixteenBit;
}
fn transfer_word<W: Word>(regs: Regs, tx_word: W) -> Result<W, Error> {
spin_until_tx_ready(regs)?;
@ -572,14 +557,7 @@ macro_rules! impl_blocking {
type Error = Error;
fn write(&mut self, words: &[$w]) -> Result<(), Self::Error> {
self.set_word_size($w::WORDSIZE);
let regs = T::regs();
for word in words.iter() {
let _ = transfer_word(regs, *word)?;
}
Ok(())
self.blocking_write(words)
}
}
@ -589,13 +567,7 @@ macro_rules! impl_blocking {
type Error = Error;
fn transfer<'w>(&mut self, words: &'w mut [$w]) -> Result<&'w [$w], Self::Error> {
self.set_word_size($w::WORDSIZE);
let regs = T::regs();
for word in words.iter_mut() {
*word = transfer_word(regs, *word)?;
}
self.blocking_transfer_in_place(words)?;
Ok(words)
}
}
@ -616,7 +588,7 @@ impl<'d, T: Instance, Tx: TxDmaChannel<T>, Rx> traits::Write<u8> for Spi<'d, T,
= impl Future<Output = Result<(), Self::Error>> + 'a;
fn write<'a>(&'a mut self, data: &'a [u8]) -> Self::WriteFuture<'a> {
self.write_dma_u8(data)
self.write(data)
}
}
@ -629,7 +601,7 @@ impl<'d, T: Instance, Tx: TxDmaChannel<T>, Rx: RxDmaChannel<T>> traits::Read<u8>
= impl Future<Output = Result<(), Self::Error>> + 'a;
fn read<'a>(&'a mut self, data: &'a mut [u8]) -> Self::ReadFuture<'a> {
self.read_dma_u8(data)
self.read(data)
}
}
@ -646,7 +618,7 @@ impl<'d, T: Instance, Tx: TxDmaChannel<T>, Rx: RxDmaChannel<T>> traits::FullDupl
read: &'a mut [u8],
write: &'a [u8],
) -> Self::WriteReadFuture<'a> {
self.read_write_dma_u8(read, write)
self.transfer(read, write)
}
}
@ -676,8 +648,72 @@ pub(crate) mod sealed {
pub trait RxDmaChannel<T: Instance> {
fn request(&self) -> dma::Request;
}
pub trait Word: Copy + 'static {
const WORDSIZE: WordSize;
}
impl Word for u8 {
const WORDSIZE: WordSize = WordSize::EightBit;
}
impl Word for u16 {
const WORDSIZE: WordSize = WordSize::SixteenBit;
}
#[derive(Copy, Clone, PartialOrd, PartialEq)]
pub enum WordSize {
EightBit,
SixteenBit,
}
impl WordSize {
#[cfg(any(spi_v1, spi_f1))]
pub fn dff(&self) -> vals::Dff {
match self {
WordSize::EightBit => vals::Dff::EIGHTBIT,
WordSize::SixteenBit => vals::Dff::SIXTEENBIT,
}
}
#[cfg(spi_v2)]
pub fn ds(&self) -> vals::Ds {
match self {
WordSize::EightBit => vals::Ds::EIGHTBIT,
WordSize::SixteenBit => vals::Ds::SIXTEENBIT,
}
}
#[cfg(spi_v2)]
pub fn frxth(&self) -> vals::Frxth {
match self {
WordSize::EightBit => vals::Frxth::QUARTER,
WordSize::SixteenBit => vals::Frxth::HALF,
}
}
#[cfg(spi_v3)]
pub fn dsize(&self) -> u8 {
match self {
WordSize::EightBit => 0b0111,
WordSize::SixteenBit => 0b1111,
}
}
#[cfg(spi_v3)]
pub fn _frxth(&self) -> vals::Fthlv {
match self {
WordSize::EightBit => vals::Fthlv::ONEFRAME,
WordSize::SixteenBit => vals::Fthlv::ONEFRAME,
}
}
}
}
pub trait Word: Copy + 'static + sealed::Word {}
impl Word for u8 {}
impl Word for u16 {}
pub trait Instance: sealed::Instance + RccPeripheral {}
pub trait SckPin<T: Instance>: sealed::SckPin<T> {}
pub trait MosiPin<T: Instance>: sealed::MosiPin<T> {}

View File

@ -1,13 +1,12 @@
#![macro_use]
pub use embedded_hal::blocking;
pub use embedded_hal::spi::{Mode, Phase, Polarity, MODE_0, MODE_1, MODE_2, MODE_3};
use futures::future::join;
use super::*;
use crate::dma::{slice_ptr_parts, slice_ptr_parts_mut, Transfer};
impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
pub(super) async fn write_dma_u8(&mut self, write: &[u8]) -> Result<(), Error>
pub(super) async fn write_dma_u8(&mut self, write: *const [u8]) -> Result<(), Error>
where
Tx: TxDmaChannel<T>,
{
@ -18,9 +17,10 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
}
self.set_word_size(WordSize::EightBit);
let request = self.txdma.request();
let dst = T::regs().tx_ptr();
let f = crate::dma::write(&mut self.txdma, request, write, dst);
let tx_request = self.txdma.request();
let tx_dst = T::regs().tx_ptr();
unsafe { self.txdma.start_write(tx_request, write, tx_dst) }
let tx_f = Transfer::new(&mut self.txdma);
unsafe {
T::regs().cr2().modify(|reg| {
@ -31,14 +31,14 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
});
}
f.await;
tx_f.await;
finish_dma(T::regs());
Ok(())
}
pub(super) async fn read_dma_u8(&mut self, read: &mut [u8]) -> Result<(), Error>
pub(super) async fn read_dma_u8(&mut self, read: *mut [u8]) -> Result<(), Error>
where
Tx: TxDmaChannel<T>,
Rx: RxDmaChannel<T>,
@ -53,11 +53,12 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
}
self.set_word_size(WordSize::EightBit);
let clock_byte_count = read.len();
let (_, clock_byte_count) = slice_ptr_parts_mut(read);
let rx_request = self.rxdma.request();
let rx_src = T::regs().rx_ptr();
let rx_f = crate::dma::read(&mut self.rxdma, rx_request, rx_src, read);
unsafe { self.rxdma.start_read(rx_request, rx_src, read) };
let rx_f = Transfer::new(&mut self.rxdma);
let tx_request = self.txdma.request();
let tx_dst = T::regs().tx_ptr();
@ -86,16 +87,18 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
Ok(())
}
pub(super) async fn read_write_dma_u8(
pub(super) async fn transfer_dma_u8(
&mut self,
read: &mut [u8],
write: &[u8],
read: *mut [u8],
write: *const [u8],
) -> Result<(), Error>
where
Tx: TxDmaChannel<T>,
Rx: RxDmaChannel<T>,
{
assert!(read.len() >= write.len());
let (_, rx_len) = slice_ptr_parts(read);
let (_, tx_len) = slice_ptr_parts(write);
assert_eq!(rx_len, tx_len);
unsafe {
T::regs().cr1().modify(|w| {
@ -109,16 +112,13 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
let rx_request = self.rxdma.request();
let rx_src = T::regs().rx_ptr();
let rx_f = crate::dma::read(
&mut self.rxdma,
rx_request,
rx_src,
&mut read[0..write.len()],
);
unsafe { self.rxdma.start_read(rx_request, rx_src, read) };
let rx_f = Transfer::new(&mut self.rxdma);
let tx_request = self.txdma.request();
let tx_dst = T::regs().tx_ptr();
let tx_f = crate::dma::write(&mut self.txdma, tx_request, write, tx_dst);
unsafe { self.txdma.start_write(tx_request, write, tx_dst) }
let tx_f = Transfer::new(&mut self.txdma);
unsafe {
T::regs().cr2().modify(|reg| {

View File

@ -1,12 +1,12 @@
#![macro_use]
pub use embedded_hal::spi::{Mode, Phase, Polarity, MODE_0, MODE_1, MODE_2, MODE_3};
use futures::future::join;
use super::*;
use crate::dma::{slice_ptr_parts, slice_ptr_parts_mut, Transfer};
impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
pub(super) async fn write_dma_u8(&mut self, write: &[u8]) -> Result<(), Error>
pub(super) async fn write_dma_u8(&mut self, write: *const [u8]) -> Result<(), Error>
where
Tx: TxDmaChannel<T>,
{
@ -22,9 +22,10 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
}
self.set_word_size(WordSize::EightBit);
let request = self.txdma.request();
let dst = T::regs().tx_ptr();
let f = crate::dma::write(&mut self.txdma, request, write, dst);
let tx_request = self.txdma.request();
let tx_dst = T::regs().tx_ptr();
unsafe { self.txdma.start_write(tx_request, write, tx_dst) }
let tx_f = Transfer::new(&mut self.txdma);
unsafe {
T::regs().cr2().modify(|reg| {
@ -35,14 +36,14 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
});
}
f.await;
tx_f.await;
finish_dma(T::regs());
Ok(())
}
pub(super) async fn read_dma_u8(&mut self, read: &mut [u8]) -> Result<(), Error>
pub(super) async fn read_dma_u8(&mut self, read: *mut [u8]) -> Result<(), Error>
where
Tx: TxDmaChannel<T>,
Rx: RxDmaChannel<T>,
@ -57,11 +58,12 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
}
self.set_word_size(WordSize::EightBit);
let clock_byte_count = read.len();
let (_, clock_byte_count) = slice_ptr_parts_mut(read);
let rx_request = self.rxdma.request();
let rx_src = T::regs().rx_ptr();
let rx_f = crate::dma::read(&mut self.rxdma, rx_request, rx_src, read);
unsafe { self.rxdma.start_read(rx_request, rx_src, read) };
let rx_f = Transfer::new(&mut self.rxdma);
let tx_request = self.txdma.request();
let tx_dst = T::regs().tx_ptr();
@ -90,16 +92,18 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
Ok(())
}
pub(super) async fn read_write_dma_u8(
pub(super) async fn transfer_dma_u8(
&mut self,
read: &mut [u8],
write: &[u8],
read: *mut [u8],
write: *const [u8],
) -> Result<(), Error>
where
Tx: TxDmaChannel<T>,
Rx: RxDmaChannel<T>,
{
assert!(read.len() >= write.len());
let (_, rx_len) = slice_ptr_parts(read);
let (_, tx_len) = slice_ptr_parts(write);
assert_eq!(rx_len, tx_len);
unsafe {
T::regs().cr1().modify(|w| {
@ -118,16 +122,13 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
let rx_request = self.rxdma.request();
let rx_src = T::regs().rx_ptr();
let rx_f = crate::dma::read(
&mut self.rxdma,
rx_request,
rx_src,
&mut read[0..write.len()],
);
unsafe { self.rxdma.start_read(rx_request, rx_src, read) };
let rx_f = Transfer::new(&mut self.rxdma);
let tx_request = self.txdma.request();
let tx_dst = T::regs().tx_ptr();
let tx_f = crate::dma::write(&mut self.txdma, tx_request, write, tx_dst);
unsafe { self.txdma.start_write(tx_request, write, tx_dst) }
let tx_f = Transfer::new(&mut self.txdma);
unsafe {
T::regs().cr2().modify(|reg| {

View File

@ -1,12 +1,12 @@
#![macro_use]
pub use embedded_hal::spi::{Mode, Phase, Polarity, MODE_0, MODE_1, MODE_2, MODE_3};
use futures::future::join;
use super::*;
use crate::dma::{slice_ptr_parts, slice_ptr_parts_mut, Transfer};
impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
pub(super) async fn write_dma_u8(&mut self, write: &[u8]) -> Result<(), Error>
pub(super) async fn write_dma_u8(&mut self, write: *const [u8]) -> Result<(), Error>
where
Tx: TxDmaChannel<T>,
{
@ -22,9 +22,10 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
}
}
let request = self.txdma.request();
let dst = T::regs().tx_ptr();
let f = crate::dma::write(&mut self.txdma, request, write, dst);
let tx_request = self.txdma.request();
let tx_dst = T::regs().tx_ptr();
unsafe { self.txdma.start_write(tx_request, write, tx_dst) }
let tx_f = Transfer::new(&mut self.txdma);
unsafe {
T::regs().cfg1().modify(|reg| {
@ -38,14 +39,14 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
});
}
f.await;
tx_f.await;
finish_dma(T::regs());
Ok(())
}
pub(super) async fn read_dma_u8(&mut self, read: &mut [u8]) -> Result<(), Error>
pub(super) async fn read_dma_u8(&mut self, read: *mut [u8]) -> Result<(), Error>
where
Tx: TxDmaChannel<T>,
Rx: RxDmaChannel<T>,
@ -60,11 +61,12 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
});
}
let clock_byte_count = read.len();
let (_, clock_byte_count) = slice_ptr_parts_mut(read);
let rx_request = self.rxdma.request();
let rx_src = T::regs().rx_ptr();
let rx_f = crate::dma::read(&mut self.rxdma, rx_request, rx_src, read);
unsafe { self.rxdma.start_read(rx_request, rx_src, read) };
let rx_f = Transfer::new(&mut self.rxdma);
let tx_request = self.txdma.request();
let tx_dst = T::regs().tx_ptr();
@ -96,16 +98,18 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
Ok(())
}
pub(super) async fn read_write_dma_u8(
pub(super) async fn transfer_dma_u8(
&mut self,
read: &mut [u8],
write: &[u8],
read: *mut [u8],
write: *const [u8],
) -> Result<(), Error>
where
Tx: TxDmaChannel<T>,
Rx: RxDmaChannel<T>,
{
assert!(read.len() >= write.len());
let (_, rx_len) = slice_ptr_parts(read);
let (_, tx_len) = slice_ptr_parts(write);
assert_eq!(rx_len, tx_len);
self.set_word_size(WordSize::EightBit);
unsafe {
@ -124,16 +128,13 @@ impl<'d, T: Instance, Tx, Rx> Spi<'d, T, Tx, Rx> {
let rx_request = self.rxdma.request();
let rx_src = T::regs().rx_ptr();
let rx_f = crate::dma::read(
&mut self.rxdma,
rx_request,
rx_src,
&mut read[0..write.len()],
);
unsafe { self.rxdma.start_read(rx_request, rx_src, read) };
let rx_f = Transfer::new(&mut self.rxdma);
let tx_request = self.txdma.request();
let tx_dst = T::regs().tx_ptr();
let tx_f = crate::dma::write(&mut self.txdma, tx_request, write, tx_dst);
unsafe { self.txdma.start_write(tx_request, write, tx_dst) }
let tx_f = Transfer::new(&mut self.txdma);
unsafe {
T::regs().cfg1().modify(|reg| {

View File

@ -82,14 +82,10 @@ use crate::{
pac,
peripherals::SUBGHZSPI,
rcc::sealed::RccPeripheral,
spi::{BitOrder, Config as SpiConfig, MisoPin, MosiPin, SckPin, Spi},
spi::{BitOrder, Config as SpiConfig, MisoPin, MosiPin, SckPin, Spi, MODE_0},
time::Hertz,
};
use embassy::util::Unborrow;
use embedded_hal::{
blocking::spi::{Transfer, Write},
spi::MODE_0,
};
/// Passthrough for SPI errors (for now)
pub type Error = crate::spi::Error;
@ -255,8 +251,8 @@ impl<'d> SubGhz<'d, NoDma, NoDma> {
self.poll_not_busy();
{
let _nss: Nss = Nss::new();
self.spi.write(&[opcode as u8])?;
self.spi.transfer(data)?;
self.spi.blocking_write(&[opcode as u8])?;
self.spi.blocking_transfer_in_place(data)?;
}
self.poll_not_busy();
Ok(())
@ -280,7 +276,7 @@ impl<'d> SubGhz<'d, NoDma, NoDma> {
self.poll_not_busy();
{
let _nss: Nss = Nss::new();
self.spi.write(data)?;
self.spi.blocking_write(data)?;
}
self.poll_not_busy();
Ok(())
@ -290,8 +286,9 @@ impl<'d> SubGhz<'d, NoDma, NoDma> {
self.poll_not_busy();
{
let _nss: Nss = Nss::new();
self.spi.write(&[OpCode::WriteBuffer as u8, offset])?;
self.spi.write(data)?;
self.spi
.blocking_write(&[OpCode::WriteBuffer as u8, offset])?;
self.spi.blocking_write(data)?;
}
self.poll_not_busy();
@ -308,9 +305,10 @@ impl<'d> SubGhz<'d, NoDma, NoDma> {
self.poll_not_busy();
{
let _nss: Nss = Nss::new();
self.spi.write(&[OpCode::ReadBuffer as u8, offset])?;
self.spi.transfer(&mut status_buf)?;
self.spi.transfer(buf)?;
self.spi
.blocking_write(&[OpCode::ReadBuffer as u8, offset])?;
self.spi.blocking_transfer_in_place(&mut status_buf)?;
self.spi.blocking_transfer_in_place(buf)?;
}
self.poll_not_busy();
@ -342,8 +340,8 @@ impl<'d> SubGhz<'d, NoDma, NoDma> {
{
let _nss: Nss = Nss::new();
self.spi
.write(&[OpCode::WriteRegister as u8, addr[0], addr[1]])?;
self.spi.write(data)?;
.blocking_write(&[OpCode::WriteRegister as u8, addr[0], addr[1]])?;
self.spi.blocking_write(data)?;
}
self.poll_not_busy();

View File

@ -129,7 +129,7 @@ impl<'d, T: Instance, TxDma, RxDma> Uart<'d, T, TxDma, RxDma> {
}
}
async fn write_dma(&mut self, buffer: &[u8]) -> Result<(), Error>
pub async fn write(&mut self, buffer: &[u8]) -> Result<(), Error>
where
TxDma: crate::usart::TxDma<T>,
{
@ -146,7 +146,7 @@ impl<'d, T: Instance, TxDma, RxDma> Uart<'d, T, TxDma, RxDma> {
Ok(())
}
async fn read_dma(&mut self, buffer: &mut [u8]) -> Result<(), Error>
pub async fn read(&mut self, buffer: &mut [u8]) -> Result<(), Error>
where
RxDma: crate::usart::RxDma<T>,
{
@ -163,7 +163,7 @@ impl<'d, T: Instance, TxDma, RxDma> Uart<'d, T, TxDma, RxDma> {
Ok(())
}
pub fn read_blocking(&mut self, buffer: &mut [u8]) -> Result<(), Error> {
pub fn blocking_read(&mut self, buffer: &mut [u8]) -> Result<(), Error> {
unsafe {
let r = self.inner.regs();
for b in buffer {
@ -190,6 +190,25 @@ impl<'d, T: Instance, TxDma, RxDma> Uart<'d, T, TxDma, RxDma> {
}
Ok(())
}
pub fn blocking_write(&mut self, buffer: &[u8]) -> Result<(), Error> {
unsafe {
let r = self.inner.regs();
for &b in buffer {
while !sr(r).read().txe() {}
tdr(r).write_volatile(b);
}
}
Ok(())
}
pub fn blocking_flush(&mut self) -> Result<(), Error> {
unsafe {
let r = self.inner.regs();
while !sr(r).read().tc() {}
}
Ok(())
}
}
impl<'d, T: Instance, TxDma, RxDma> embedded_hal::serial::Read<u8> for Uart<'d, T, TxDma, RxDma> {
@ -224,21 +243,10 @@ impl<'d, T: Instance, TxDma, RxDma> embedded_hal::blocking::serial::Write<u8>
{
type Error = Error;
fn bwrite_all(&mut self, buffer: &[u8]) -> Result<(), Self::Error> {
unsafe {
let r = self.inner.regs();
for &b in buffer {
while !sr(r).read().txe() {}
tdr(r).write_volatile(b);
}
}
Ok(())
self.blocking_write(buffer)
}
fn bflush(&mut self) -> Result<(), Self::Error> {
unsafe {
let r = self.inner.regs();
while !sr(r).read().tc() {}
}
Ok(())
self.blocking_flush()
}
}
@ -252,7 +260,7 @@ where
= impl Future<Output = Result<(), embassy_traits::uart::Error>> + 'a;
fn write<'a>(&'a mut self, buf: &'a [u8]) -> Self::WriteFuture<'a> {
self.write_dma(buf)
self.write(buf)
.map_err(|_| embassy_traits::uart::Error::Other)
}
}
@ -267,7 +275,7 @@ where
= impl Future<Output = Result<(), embassy_traits::uart::Error>> + 'a;
fn read<'a>(&'a mut self, buf: &'a mut [u8]) -> Self::ReadFuture<'a> {
self.read_dma(buf)
self.read(buf)
.map_err(|_| embassy_traits::uart::Error::Other)
}
}

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[embassy::main]
@ -19,11 +18,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
loop {
info!("high");
unwrap!(led.set_high());
led.set_high();
Timer::after(Duration::from_millis(300)).await;
info!("low");
unwrap!(led.set_low());
led.set_low();
Timer::after(Duration::from_millis(300)).await;
}
}

View File

@ -9,7 +9,6 @@ use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[embassy::main]
@ -20,11 +19,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
loop {
info!("high");
unwrap!(led.set_high());
led.set_high();
Timer::after(Duration::from_millis(1000)).await;
info!("low");
unwrap!(led.set_low());
led.set_low();
Timer::after(Duration::from_millis(1000)).await;
}
}

View File

@ -6,7 +6,6 @@
mod example_common;
use cortex_m_rt::entry;
use embassy_stm32::gpio::{Input, Level, Output, Pull, Speed};
use embedded_hal::digital::v2::{InputPin, OutputPin};
use example_common::*;
#[entry]
@ -20,14 +19,14 @@ fn main() -> ! {
let mut led2 = Output::new(p.PE15, Level::High, Speed::Low);
loop {
if unwrap!(button.is_high()) {
if button.is_high() {
info!("high");
unwrap!(led1.set_high());
unwrap!(led2.set_low());
led1.set_high();
led2.set_low();
} else {
info!("low");
unwrap!(led1.set_low());
unwrap!(led2.set_high());
led1.set_low();
led2.set_high();
}
}
}

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy_stm32::exti::ExtiInput;
use embassy_stm32::gpio::{Input, Pull};
use embassy_stm32::Peripherals;
use embassy_traits::gpio::{WaitForFallingEdge, WaitForRisingEdge};
use example_common::*;
#[embassy::main]

View File

@ -9,7 +9,6 @@ use embassy::executor::Spawner;
use embassy_stm32::dma::NoDma;
use embassy_stm32::usart::{Config, Uart};
use embassy_stm32::Peripherals;
use embassy_traits::uart::Write as _;
use example_common::*;
use heapless::String;

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[embassy::main]
@ -19,11 +18,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
loop {
info!("high");
unwrap!(led.set_high());
led.set_high();
Timer::after(Duration::from_millis(300)).await;
info!("low");
unwrap!(led.set_low());
led.set_low();
Timer::after(Duration::from_millis(300)).await;
}
}

View File

@ -6,7 +6,6 @@
mod example_common;
use cortex_m_rt::entry;
use embassy_stm32::gpio::{Input, Level, Output, Pull, Speed};
use embedded_hal::digital::v2::{InputPin, OutputPin};
use example_common::*;
#[entry]
@ -21,14 +20,14 @@ fn main() -> ! {
let mut led3 = Output::new(p.PB14, Level::High, Speed::Low);
loop {
if unwrap!(button.is_high()) {
if button.is_high() {
info!("high");
unwrap!(led1.set_high());
unwrap!(led3.set_low());
led1.set_high();
led3.set_low();
} else {
info!("low");
unwrap!(led1.set_low());
unwrap!(led3.set_high());
led1.set_low();
led3.set_high();
}
}
}

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy_stm32::exti::ExtiInput;
use embassy_stm32::gpio::{Input, Pull};
use embassy_stm32::Peripherals;
use embassy_traits::gpio::{WaitForFallingEdge, WaitForRisingEdge};
use example_common::*;
#[embassy::main]

View File

@ -10,8 +10,6 @@ use embassy_stm32::dma::NoDma;
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::spi::{Config, Spi};
use embassy_stm32::time::Hertz;
use embedded_hal::blocking::spi::Transfer;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[entry]
@ -35,9 +33,9 @@ fn main() -> ! {
loop {
let mut buf = [0x0Au8; 4];
unwrap!(cs.set_low());
unwrap!(spi.transfer(&mut buf));
unwrap!(cs.set_high());
cs.set_low();
unwrap!(spi.blocking_transfer_in_place(&mut buf));
cs.set_high();
info!("xfer {=[u8]:x}", buf);
}
}

View File

@ -10,7 +10,6 @@ use embassy::executor::Spawner;
use embassy_stm32::spi::{Config, Spi};
use embassy_stm32::time::Hertz;
use embassy_stm32::Peripherals;
use embassy_traits::spi::FullDuplex;
use example_common::*;
use heapless::String;
@ -33,7 +32,7 @@ async fn main(_spawner: Spawner, p: Peripherals) {
let mut write: String<128> = String::new();
let mut read = [0; 128];
core::write!(&mut write, "Hello DMA World {}!\r\n", n).unwrap();
spi.read_write(&mut read[0..write.len()], write.as_bytes())
spi.transfer(&mut read[0..write.len()], write.as_bytes())
.await
.ok();
info!("read via spi+dma: {}", from_utf8(&read).unwrap());

View File

@ -7,7 +7,6 @@ mod example_common;
use cortex_m_rt::entry;
use embassy_stm32::dma::NoDma;
use embassy_stm32::usart::{Config, Uart};
use embedded_hal::blocking::serial::Write;
use example_common::*;
#[entry]
@ -19,12 +18,12 @@ fn main() -> ! {
let config = Config::default();
let mut usart = Uart::new(p.USART3, p.PD9, p.PD8, NoDma, NoDma, config);
unwrap!(usart.bwrite_all(b"Hello Embassy World!\r\n"));
unwrap!(usart.blocking_write(b"Hello Embassy World!\r\n"));
info!("wrote Hello, starting echo");
let mut buf = [0u8; 1];
loop {
unwrap!(usart.read_blocking(&mut buf));
unwrap!(usart.bwrite_all(&buf));
unwrap!(usart.blocking_read(&mut buf));
unwrap!(usart.blocking_write(&buf));
}
}

View File

@ -9,7 +9,6 @@ use embassy::executor::Spawner;
use embassy_stm32::dma::NoDma;
use embassy_stm32::usart::{Config, Uart};
use embassy_stm32::Peripherals;
use embassy_traits::uart::Write as _;
use example_common::*;
use heapless::String;

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[embassy::main]
@ -19,11 +18,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
loop {
info!("high");
unwrap!(led.set_high());
led.set_high();
Timer::after(Duration::from_millis(300)).await;
info!("low");
unwrap!(led.set_low());
led.set_low();
Timer::after(Duration::from_millis(300)).await;
}
}

View File

@ -6,7 +6,6 @@
mod example_common;
use cortex_m_rt::entry;
use embassy_stm32::gpio::{Input, Level, Output, Pull, Speed};
use embedded_hal::digital::v2::{InputPin, OutputPin};
use example_common::*;
#[entry]
@ -21,14 +20,14 @@ fn main() -> ! {
let mut led3 = Output::new(p.PB14, Level::High, Speed::Low);
loop {
if unwrap!(button.is_high()) {
if button.is_high() {
info!("high");
unwrap!(led1.set_high());
unwrap!(led3.set_low());
led1.set_high();
led3.set_low();
} else {
info!("low");
unwrap!(led1.set_low());
unwrap!(led3.set_high());
led1.set_low();
led3.set_high();
}
}
}

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy_stm32::exti::ExtiInput;
use embassy_stm32::gpio::{Input, Pull};
use embassy_stm32::Peripherals;
use embassy_traits::gpio::{WaitForFallingEdge, WaitForRisingEdge};
use example_common::*;
#[embassy::main]

View File

@ -9,7 +9,6 @@ use embassy::executor::Spawner;
use embassy_stm32::dma::NoDma;
use embassy_stm32::usart::{Config, Uart};
use embassy_stm32::Peripherals;
use embassy_traits::uart::Write as _Write;
use example_common::*;
use heapless::String;

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[embassy::main]
@ -19,11 +18,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
loop {
info!("high");
unwrap!(led.set_high());
led.set_high();
Timer::after(Duration::from_millis(300)).await;
info!("low");
unwrap!(led.set_low());
led.set_low();
Timer::after(Duration::from_millis(300)).await;
}
}

View File

@ -6,7 +6,6 @@
mod example_common;
use cortex_m_rt::entry;
use embassy_stm32::gpio::{Input, Pull};
use embedded_hal::digital::v2::InputPin;
use example_common::*;
#[entry]
@ -18,7 +17,7 @@ fn main() -> ! {
let button = Input::new(p.PC13, Pull::Up);
loop {
if unwrap!(button.is_high()) {
if button.is_high() {
info!("high");
} else {
info!("low");

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy_stm32::exti::ExtiInput;
use embassy_stm32::gpio::{Input, Pull};
use embassy_stm32::Peripherals;
use embassy_traits::gpio::{WaitForFallingEdge, WaitForRisingEdge};
use example_common::*;
#[embassy::main]

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[embassy::main]
@ -19,11 +18,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
loop {
info!("high");
unwrap!(led.set_high());
led.set_high();
Timer::after(Duration::from_millis(300)).await;
info!("low");
unwrap!(led.set_low());
led.set_low();
Timer::after(Duration::from_millis(300)).await;
}
}

View File

@ -6,7 +6,6 @@
mod example_common;
use cortex_m_rt::entry;
use embassy_stm32::gpio::{Input, Pull};
use embedded_hal::digital::v2::InputPin;
use example_common::*;
#[entry]
@ -18,7 +17,7 @@ fn main() -> ! {
let button = Input::new(p.PC13, Pull::Down);
loop {
if unwrap!(button.is_high()) {
if button.is_high() {
info!("high");
} else {
info!("low");

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy_stm32::exti::ExtiInput;
use embassy_stm32::gpio::{Input, Pull};
use embassy_stm32::Peripherals;
use embassy_traits::gpio::{WaitForFallingEdge, WaitForRisingEdge};
use example_common::*;
#[embassy::main]

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[embassy::main]
@ -19,11 +18,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
loop {
info!("high");
unwrap!(led.set_high());
led.set_high();
Timer::after(Duration::from_millis(500)).await;
info!("low");
unwrap!(led.set_low());
led.set_low();
Timer::after(Duration::from_millis(500)).await;
}
}

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy_stm32::exti::ExtiInput;
use embassy_stm32::gpio::{Input, Pull};
use embassy_stm32::Peripherals;
use embassy_traits::gpio::{WaitForFallingEdge, WaitForRisingEdge};
use example_common::*;
#[embassy::main]

View File

@ -11,7 +11,6 @@ use embassy_stm32::interrupt;
use embassy_stm32::rcc::{Mco, Mco1Source, McoClock};
use embassy_stm32::time::U32Ext;
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use defmt_rtt as _; // global logger
use panic_probe as _;
@ -114,11 +113,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
defmt::info!("main loop running");
loop {
defmt::info!("high");
defmt::unwrap!(led.set_high());
led.set_high();
Timer::after(Duration::from_millis(500)).await;
defmt::info!("low");
defmt::unwrap!(led.set_low());
led.set_low();
Timer::after(Duration::from_millis(500)).await;
}
}

View File

@ -9,7 +9,6 @@ use embassy::time::{Duration, Timer};
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::rcc::{Mco, Mco1Source, McoClock};
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[embassy::main]
@ -22,11 +21,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
loop {
info!("high");
unwrap!(led.set_high());
led.set_high();
Timer::after(Duration::from_millis(500)).await;
info!("low");
unwrap!(led.set_low());
led.set_low();
Timer::after(Duration::from_millis(500)).await;
}
}

View File

@ -10,7 +10,6 @@ use embassy::traits::rng::Random;
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::rng::Rng;
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[embassy::main]
@ -23,11 +22,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
loop {
info!("high {}", unwrap!(rng.next_u8(16).await));
unwrap!(led.set_high());
led.set_high();
Timer::after(Duration::from_millis(500)).await;
info!("low {}", unwrap!(rng.next_u8(16).await));
unwrap!(led.set_low());
led.set_low();
Timer::after(Duration::from_millis(500)).await;
}
}

View File

@ -10,7 +10,6 @@ use embassy::executor::Executor;
use embassy::util::Forever;
use embassy_stm32::dma::NoDma;
use embassy_stm32::spi;
use embedded_hal::blocking::spi::Transfer;
use example_common::*;
use core::str::from_utf8;
@ -25,7 +24,7 @@ async fn main_task(mut spi: spi::Spi<'static, SPI3, NoDma, NoDma>) {
let mut write: String<128> = String::new();
core::write!(&mut write, "Hello DMA World {}!\r\n", n).unwrap();
unsafe {
let result = spi.transfer(write.as_bytes_mut());
let result = spi.blocking_transfer_in_place(write.as_bytes_mut());
if let Err(_) = result {
defmt::panic!("crap");
}

View File

@ -4,7 +4,6 @@
#[path = "../example_common.rs"]
mod example_common;
use cortex_m::prelude::_embedded_hal_blocking_serial_Write;
use embassy::executor::Executor;
use embassy::util::Forever;
use embassy_stm32::dma::NoDma;
@ -20,13 +19,13 @@ async fn main_task() {
let config = Config::default();
let mut usart = Uart::new(p.UART7, p.PF6, p.PF7, NoDma, NoDma, config);
unwrap!(usart.bwrite_all(b"Hello Embassy World!\r\n"));
unwrap!(usart.blocking_write(b"Hello Embassy World!\r\n"));
info!("wrote Hello, starting echo");
let mut buf = [0u8; 1];
loop {
unwrap!(usart.read_blocking(&mut buf));
unwrap!(usart.bwrite_all(&buf));
unwrap!(usart.blocking_read(&mut buf));
unwrap!(usart.blocking_write(&buf));
}
}

View File

@ -9,7 +9,6 @@ use embassy::executor::Executor;
use embassy::util::Forever;
use embassy_stm32::dma::NoDma;
use embassy_stm32::usart::{Config, Uart};
use embassy_traits::uart::Write as _Write;
use example_common::*;
use cortex_m_rt::entry;

View File

@ -1,6 +1,6 @@
[target.'cfg(all(target_arch = "arm", target_os = "none"))']
# replace your chip as listed in `probe-run --list-chips`
runner = "probe-run --chip STM32L072CZ"
runner = "probe-run --chip STM32L072CZTx"
[build]
target = "thumbv6m-none-eabi"

View File

@ -8,7 +8,7 @@ resolver = "2"
[dependencies]
embassy = { version = "0.1.0", path = "../../embassy", features = ["defmt"] }
embassy-traits = { version = "0.1.0", path = "../../embassy-traits", features = ["defmt"] }
embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["defmt", "stm32l072cz", "time-driver-tim3", "exti"] }
embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["defmt", "stm32l072cz", "time-driver-tim3", "exti", "memory-x"] }
embassy-lora = { version = "0.1.0", path = "../../embassy-lora", features = ["sx127x", "time", "defmt"] }

View File

@ -1,34 +1,4 @@
//! This build script copies the `memory.x` file from the crate root into
//! a directory where the linker can always find it at build time.
//! For many projects this is optional, as the linker always searches the
//! project root directory -- wherever `Cargo.toml` is. However, if you
//! are using a workspace or have a more complicated build setup, this
//! build script becomes required. Additionally, by requesting that
//! Cargo re-run the build script whenever `memory.x` is changed,
//! updating `memory.x` ensures a rebuild of the application with the
//! new memory settings.
use std::env;
use std::fs::File;
use std::io::Write;
use std::path::PathBuf;
fn main() {
// Put `memory.x` in our output directory and ensure it's
// on the linker search path.
let out = &PathBuf::from(env::var_os("OUT_DIR").unwrap());
File::create(out.join("memory.x"))
.unwrap()
.write_all(include_bytes!("memory.x"))
.unwrap();
println!("cargo:rustc-link-search={}", out.display());
// By default, Cargo will re-run a build script whenever
// any file in the project changes. By specifying `memory.x`
// here, we ensure the build script is only re-run when
// `memory.x` is changed.
println!("cargo:rerun-if-changed=memory.x");
println!("cargo:rustc-link-arg-bins=--nmagic");
println!("cargo:rustc-link-arg-bins=-Tlink.x");
println!("cargo:rustc-link-arg-bins=-Tdefmt.x");

View File

@ -1,5 +0,0 @@
MEMORY
{
FLASH : ORIGIN = 0x08000000, LENGTH = 192K
RAM : ORIGIN = 0x20000000, LENGTH = 20K
}

View File

@ -9,7 +9,6 @@ use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[embassy::main]
@ -20,11 +19,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
loop {
info!("high");
unwrap!(led.set_high());
led.set_high();
Timer::after(Duration::from_millis(300)).await;
info!("low");
unwrap!(led.set_low());
led.set_low();
Timer::after(Duration::from_millis(300)).await;
}
}

View File

@ -7,7 +7,6 @@ mod example_common;
use embassy::executor::Spawner;
use embassy_stm32::gpio::{Input, Level, Output, Pull, Speed};
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::{InputPin, OutputPin};
use example_common::*;
#[embassy::main]
@ -19,14 +18,14 @@ async fn main(_spawner: Spawner, p: Peripherals) {
let mut led2 = Output::new(p.PB5, Level::High, Speed::Low);
loop {
if unwrap!(button.is_high()) {
if button.is_high() {
info!("high");
unwrap!(led1.set_high());
unwrap!(led2.set_low());
led1.set_high();
led2.set_low();
} else {
info!("low");
unwrap!(led1.set_low());
unwrap!(led2.set_high());
led1.set_low();
led2.set_high();
}
}
}

View File

@ -9,7 +9,6 @@ use embassy::executor::Spawner;
use embassy_stm32::exti::ExtiInput;
use embassy_stm32::gpio::{Input, Pull};
use embassy_stm32::Peripherals;
use embassy_traits::gpio::{WaitForFallingEdge, WaitForRisingEdge};
use example_common::*;
fn config() -> embassy_stm32::Config {

View File

@ -7,14 +7,12 @@ mod example_common;
use embassy::executor::Spawner;
use embassy_stm32::gpio::{Level, Output, Speed};
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
use embassy_stm32::dma::NoDma;
use embassy_stm32::spi::{Config, Spi};
use embassy_stm32::time::Hertz;
use embassy_stm32::Peripherals;
use embedded_hal::blocking::spi::Transfer;
#[embassy::main]
async fn main(_spawner: Spawner, p: Peripherals) {
@ -35,9 +33,9 @@ async fn main(_spawner: Spawner, p: Peripherals) {
loop {
let mut buf = [0x0Au8; 4];
unwrap!(cs.set_low());
unwrap!(spi.transfer(&mut buf));
unwrap!(cs.set_high());
cs.set_low();
unwrap!(spi.blocking_transfer_in_place(&mut buf));
cs.set_high();
info!("xfer {=[u8]:x}", buf);
}
}

View File

@ -10,7 +10,6 @@ use example_common::*;
use embassy::executor::Spawner;
use embassy_stm32::usart::{Config, Uart};
use embassy_stm32::Peripherals;
use embassy_traits::uart::{Read, Write};
#[embassy::main]
async fn main(_spawner: Spawner, p: Peripherals) {

View File

@ -9,7 +9,6 @@ use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[embassy::main]
@ -20,11 +19,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
loop {
info!("high");
unwrap!(led.set_high());
led.set_high();
Timer::after(Duration::from_millis(1000)).await;
info!("low");
unwrap!(led.set_low());
led.set_low();
Timer::after(Duration::from_millis(1000)).await;
}
}

View File

@ -7,14 +7,12 @@ mod example_common;
use embassy::executor::Spawner;
use embassy_stm32::gpio::{Level, Output, Speed};
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
use embassy_stm32::dma::NoDma;
use embassy_stm32::spi::{Config, Spi};
use embassy_stm32::time::Hertz;
use embassy_stm32::Peripherals;
use embedded_hal::blocking::spi::Transfer;
#[embassy::main]
async fn main(_spawner: Spawner, p: Peripherals) {
@ -35,9 +33,9 @@ async fn main(_spawner: Spawner, p: Peripherals) {
loop {
let mut buf = [0x0Au8; 4];
unwrap!(cs.set_low());
unwrap!(spi.transfer(&mut buf));
unwrap!(cs.set_high());
cs.set_low();
unwrap!(spi.blocking_transfer_in_place(&mut buf));
cs.set_high();
info!("xfer {=[u8]:x}", buf);
}
}

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[embassy::main]
@ -18,9 +17,9 @@ async fn main(_spawner: Spawner, p: Peripherals) {
let mut led = Output::new(p.PB14, Level::High, Speed::Low);
loop {
unwrap!(led.set_high());
led.set_high();
Timer::after(Duration::from_millis(300)).await;
unwrap!(led.set_low());
led.set_low();
Timer::after(Duration::from_millis(300)).await;
}
}

View File

@ -5,7 +5,6 @@
#[path = "../example_common.rs"]
mod example_common;
use embassy_stm32::gpio::{Input, Pull};
use embedded_hal::digital::v2::InputPin;
use example_common::*;
#[cortex_m_rt::entry]
@ -17,7 +16,7 @@ fn main() -> ! {
let button = Input::new(p.PC13, Pull::Up);
loop {
if unwrap!(button.is_high()) {
if button.is_high() {
info!("high");
} else {
info!("low");

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy_stm32::exti::ExtiInput;
use embassy_stm32::gpio::{Input, Pull};
use embassy_stm32::Peripherals;
use embassy_traits::gpio::{WaitForFallingEdge, WaitForRisingEdge};
use example_common::*;
#[embassy::main]

View File

@ -11,7 +11,6 @@ use embassy_stm32::i2c::I2c;
use embassy_stm32::interrupt;
use embassy_stm32::time::Hertz;
use embassy_stm32::Peripherals;
use embedded_hal::blocking::i2c::WriteRead;
use example_common::{info, unwrap};
const ADDRESS: u8 = 0x5F;
@ -23,6 +22,6 @@ async fn main(_spawner: Spawner, p: Peripherals) -> ! {
let mut i2c = I2c::new(p.I2C2, p.PB10, p.PB11, irq, NoDma, NoDma, Hertz(100_000));
let mut data = [0u8; 1];
unwrap!(i2c.write_read(ADDRESS, &[WHOAMI], &mut data));
unwrap!(i2c.blocking_write_read(ADDRESS, &[WHOAMI], &mut data));
info!("Whoami: {}", data[0]);
}

View File

@ -6,7 +6,6 @@
mod example_common;
use embassy::executor::Spawner;
use embassy::traits::i2c::I2c as I2cTrait;
use embassy_stm32::i2c::I2c;
use embassy_stm32::interrupt;
use embassy_stm32::time::Hertz;

View File

@ -9,8 +9,6 @@ use embassy_stm32::dma::NoDma;
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::spi::{Config, Spi};
use embassy_stm32::time::Hertz;
use embedded_hal::blocking::spi::Transfer;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[cortex_m_rt::entry]
@ -34,9 +32,9 @@ fn main() -> ! {
loop {
let mut buf = [0x0Au8; 4];
unwrap!(cs.set_low());
unwrap!(spi.transfer(&mut buf));
unwrap!(cs.set_high());
cs.set_low();
unwrap!(spi.blocking_transfer_in_place(&mut buf));
cs.set_high();
info!("xfer {=[u8]:x}", buf);
}
}

View File

@ -12,7 +12,6 @@ use embassy_stm32::spi::{Config, Spi};
use embassy_stm32::time::Hertz;
use embassy_stm32::Peripherals;
use embassy_traits::{adapter::BlockingAsync, spi::FullDuplex};
use embedded_hal::digital::v2::{InputPin, OutputPin};
use example_common::*;
#[embassy::main]
@ -41,17 +40,17 @@ async fn main(_spawner: Spawner, p: Peripherals) {
let ready = Input::new(p.PE1, Pull::Up);
cortex_m::asm::delay(100_000);
unwrap!(reset.set_high());
reset.set_high();
cortex_m::asm::delay(100_000);
while unwrap!(ready.is_low()) {
while ready.is_low() {
info!("waiting for ready");
}
let write = [0x0A; 10];
let mut read = [0; 10];
unwrap!(cs.set_low());
cs.set_low();
spi.read_write(&mut read, &write).await.ok();
unwrap!(cs.set_high());
cs.set_high();
info!("xfer {=[u8]:x}", read);
}

View File

@ -11,7 +11,6 @@ use embassy_stm32::spi::{Config, Spi};
use embassy_stm32::time::Hertz;
use embassy_stm32::Peripherals;
use embassy_traits::spi::FullDuplex;
use embedded_hal::digital::v2::{InputPin, OutputPin};
use example_common::*;
#[embassy::main]
@ -38,17 +37,17 @@ async fn main(_spawner: Spawner, p: Peripherals) {
let ready = Input::new(p.PE1, Pull::Up);
cortex_m::asm::delay(100_000);
unwrap!(reset.set_high());
reset.set_high();
cortex_m::asm::delay(100_000);
while unwrap!(ready.is_low()) {
while ready.is_low() {
info!("waiting for ready");
}
let write = [0x0A; 10];
let mut read = [0; 10];
unwrap!(cs.set_low());
cs.set_low();
spi.read_write(&mut read, &write).await.ok();
unwrap!(cs.set_high());
cs.set_high();
info!("xfer {=[u8]:x}", read);
}

View File

@ -7,7 +7,6 @@ mod example_common;
use embassy_stm32::dma::NoDma;
use embassy_stm32::usart::{Config, Uart};
use embedded_hal::blocking::serial::Write;
use example_common::*;
#[cortex_m_rt::entry]
@ -19,12 +18,12 @@ fn main() -> ! {
let config = Config::default();
let mut usart = Uart::new(p.UART4, p.PA1, p.PA0, NoDma, NoDma, config);
unwrap!(usart.bwrite_all(b"Hello Embassy World!\r\n"));
unwrap!(usart.blocking_write(b"Hello Embassy World!\r\n"));
info!("wrote Hello, starting echo");
let mut buf = [0u8; 1];
loop {
unwrap!(usart.read_blocking(&mut buf));
unwrap!(usart.bwrite_all(&buf));
unwrap!(usart.blocking_read(&mut buf));
unwrap!(usart.blocking_write(&buf));
}
}

View File

@ -9,7 +9,6 @@ use embassy::executor::Spawner;
use embassy_stm32::dma::NoDma;
use embassy_stm32::usart::{Config, Uart};
use embassy_stm32::Peripherals;
use embassy_traits::uart::Write as _;
use example_common::*;
use heapless::String;

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[embassy::main]
@ -19,11 +18,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
loop {
info!("high");
unwrap!(led.set_high());
led.set_high();
Timer::after(Duration::from_millis(500)).await;
info!("low");
unwrap!(led.set_low());
led.set_low();
Timer::after(Duration::from_millis(500)).await;
}
}

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy_stm32::exti::ExtiInput;
use embassy_stm32::gpio::{Input, Pull};
use embassy_stm32::Peripherals;
use embassy_traits::gpio::{WaitForFallingEdge, WaitForRisingEdge};
use example_common::*;
#[embassy::main]

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy::time::{Duration, Timer};
use embassy_stm32::gpio::{Level, Output, Speed};
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use example_common::*;
#[embassy::main]
@ -19,11 +18,11 @@ async fn main(_spawner: Spawner, p: Peripherals) {
loop {
info!("high");
unwrap!(led.set_high());
led.set_high();
Timer::after(Duration::from_millis(500)).await;
info!("low");
unwrap!(led.set_low());
led.set_low();
Timer::after(Duration::from_millis(500)).await;
}
}

View File

@ -5,7 +5,6 @@
#[path = "../example_common.rs"]
mod example_common;
use embassy_stm32::gpio::{Input, Level, Output, Pull, Speed};
use embedded_hal::digital::v2::{InputPin, OutputPin};
use example_common::*;
use cortex_m_rt::entry;
@ -21,12 +20,12 @@ fn main() -> ! {
let mut led2 = Output::new(p.PB9, Level::High, Speed::Low);
loop {
if button.is_high().unwrap() {
led1.set_high().unwrap();
led2.set_low().unwrap();
if button.is_high() {
led1.set_high();
led2.set_low();
} else {
led1.set_low().unwrap();
led2.set_high().unwrap();
led1.set_low();
led2.set_high();
}
}
}

View File

@ -8,7 +8,6 @@ use embassy::executor::Spawner;
use embassy_stm32::exti::ExtiInput;
use embassy_stm32::gpio::{Input, Pull};
use embassy_stm32::Peripherals;
use embassy_traits::gpio::{WaitForFallingEdge, WaitForRisingEdge};
use example_common::*;
#[embassy::main]

View File

@ -10,14 +10,12 @@ mod example_common;
use embassy::channel::signal::Signal;
use embassy::interrupt::{Interrupt, InterruptExt};
use embassy::traits::gpio::WaitForRisingEdge;
use embassy_stm32::dma::NoDma;
use embassy_stm32::exti::ExtiInput;
use embassy_stm32::gpio::{Input, Level, Output, Pull, Speed};
use embassy_stm32::interrupt;
use embassy_stm32::subghz::*;
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::OutputPin;
use example_common::unwrap;
const PING_DATA: &str = "PING";
@ -89,9 +87,9 @@ async fn main(_spawner: embassy::executor::Spawner, p: Peripherals) {
defmt::info!("Radio ready for use");
unwrap!(led1.set_low());
led1.set_low();
unwrap!(led2.set_high());
led2.set_high();
unwrap!(radio.set_standby(StandbyClk::Rc));
unwrap!(radio.set_tcxo_mode(&TCXO_MODE));
@ -110,11 +108,11 @@ async fn main(_spawner: embassy::executor::Spawner, p: Peripherals) {
defmt::info!("Status: {:?}", unwrap!(radio.status()));
unwrap!(led2.set_low());
led2.set_low();
loop {
pin.wait_for_rising_edge().await;
unwrap!(led3.set_high());
led3.set_high();
unwrap!(radio.set_irq_cfg(&CfgIrq::new().irq_enable_all(Irq::TxDone)));
unwrap!(radio.write_buffer(TX_BUF_OFFSET, PING_DATA_BYTES));
unwrap!(radio.set_tx(Timeout::DISABLED));
@ -127,6 +125,6 @@ async fn main(_spawner: embassy::executor::Spawner, p: Peripherals) {
defmt::info!("TX done");
}
unwrap!(radio.clear_irq_status(irq_status));
unwrap!(led3.set_low());
led3.set_low();
}
}

View File

@ -8,7 +8,6 @@ use defmt::assert;
use embassy::executor::Spawner;
use embassy_stm32::gpio::{Input, Level, Output, Pull, Speed};
use embassy_stm32::Peripherals;
use embedded_hal::digital::v2::{InputPin, OutputPin};
use example_common::*;
#[embassy::main(config = "config()")]
@ -35,12 +34,12 @@ async fn main(_spawner: Spawner, p: Peripherals) {
{
let _a = Output::new(&mut a, Level::Low, Speed::Low);
delay();
assert!(b.is_low().unwrap());
assert!(b.is_low());
}
{
let _a = Output::new(&mut a, Level::High, Speed::Low);
delay();
assert!(b.is_high().unwrap());
assert!(b.is_high());
}
}
@ -51,38 +50,38 @@ async fn main(_spawner: Spawner, p: Peripherals) {
let mut a = Output::new(&mut a, Level::Low, Speed::Low);
delay();
assert!(b.is_low().unwrap());
a.set_high().unwrap();
assert!(b.is_low());
a.set_high();
delay();
assert!(b.is_high().unwrap());
assert!(b.is_high());
}
// Test input pulldown
{
let b = Input::new(&mut b, Pull::Down);
delay();
assert!(b.is_low().unwrap());
assert!(b.is_low());
let mut a = Output::new(&mut a, Level::Low, Speed::Low);
delay();
assert!(b.is_low().unwrap());
a.set_high().unwrap();
assert!(b.is_low());
a.set_high();
delay();
assert!(b.is_high().unwrap());
assert!(b.is_high());
}
// Test input pullup
{
let b = Input::new(&mut b, Pull::Up);
delay();
assert!(b.is_high().unwrap());
assert!(b.is_high());
let mut a = Output::new(&mut a, Level::Low, Speed::Low);
delay();
assert!(b.is_low().unwrap());
a.set_high().unwrap();
assert!(b.is_low());
a.set_high();
delay();
assert!(b.is_high().unwrap());
assert!(b.is_high());
}
info!("Test OK");

View File

@ -10,7 +10,6 @@ use embassy_stm32::dma::NoDma;
use embassy_stm32::spi::{self, Spi};
use embassy_stm32::time::Hertz;
use embassy_stm32::Peripherals;
use embedded_hal::blocking::spi::Transfer;
use example_common::*;
#[embassy::main(config = "config()")]
@ -38,7 +37,7 @@ async fn main(_spawner: Spawner, p: Peripherals) {
// Arduino pins D11 and D12 (MOSI-MISO) are connected together with a 1K resistor.
// so we should get the data we sent back.
let mut buf = data;
spi.transfer(&mut buf).unwrap();
spi.blocking_transfer_in_place(&mut buf).unwrap();
assert_eq!(buf, data);
info!("Test OK");

View File

@ -9,7 +9,6 @@ use embassy::executor::Spawner;
use embassy_stm32::dma::NoDma;
use embassy_stm32::usart::{Config, Uart};
use embassy_stm32::Peripherals;
use embedded_hal::blocking::serial::Write;
use example_common::*;
#[embassy::main(config = "config()")]
@ -42,10 +41,10 @@ async fn main(_spawner: Spawner, p: Peripherals) {
// This is because we aren't sending+receiving at the same time.
let data = [0xC0, 0xDE];
usart.bwrite_all(&data).unwrap();
usart.blocking_write(&data).unwrap();
let mut buf = [0; 2];
usart.read_blocking(&mut buf).unwrap();
usart.blocking_read(&mut buf).unwrap();
assert_eq!(buf, data);
info!("Test OK");

View File

@ -8,7 +8,6 @@ use defmt::assert_eq;
use embassy::executor::Spawner;
use embassy_stm32::usart::{Config, Uart};
use embassy_stm32::Peripherals;
use embassy_traits::uart::{Read, Write};
use example_common::*;
#[embassy::main(config = "config()")]

12
tests/stm32/teleprobe.sh Executable file
View File

@ -0,0 +1,12 @@
echo Running target=$1 elf=$2
STATUSCODE=$(
curl \
-sS \
--output /dev/stderr \
--write-out "%{http_code}" \
-H "Authorization: Bearer $TELEPROBE_TOKEN" \
https://teleprobe.embassy.dev/targets/$1/run --data-binary @$2
)
echo
echo HTTP Status code: $STATUSCODE
test "$STATUSCODE" -eq 200