Commit Graph

754 Commits

Author SHA1 Message Date
Dario Nieuwenhuis
ada3d5be7c nrf: rename UARTETWISPIn -> SERIALn
The UARTETWISPIn naming is quite horrible. With the nRF53, Nordic realized this
and renamed the interrupts to SERIALn. Let's copy that for our peripheral names, in nrf53 and nrf91.
2023-02-21 22:41:23 +01:00
Dario Nieuwenhuis
13328c58d3
examples/stm32wb: do not reserve words at start of RAM.
They're used to communicate from the app to ST's OTA bootloader. See AN5247. 

This bootloader is optional, must be flashed by the user, and requires changing the FLASH start address as well, so the current memory regions still require modifications to use it. Therefore there's no point in reserving these words.

Thanks @adamgreig for investigating the purpose.
2023-02-20 01:01:01 +01:00
bors[bot]
1567e724f9
Merge #1218 #1219
1218: Lora: sx126x: Change timing window to match values found experimentally. r=Dirbaio a=CBJamo

As mentioned in #1188.

1219: stm32/sdmmc: Fix SDIOv1 writes r=Dirbaio a=chemicstry

This fixes writes on sdmmc v1 (SDIO). I'm pretty sure I tested writes in #669, but maybe I was just lucky or I just forgot.

There were two problems:
- Writes require DMA FIFO mode, otherwise SDIO FIFO is under/overrun depending on sdio/pclk2 clock ratio.
- Hardware flow control is broken for sdmmc v1 (I checked F1 and F4 erratas). This causes clock glitches above 12 MHz and results in write CRC errors.

Co-authored-by: Caleb Jamison <caleb@cbjamo.com>
Co-authored-by: chemicstry <chemicstry@gmail.com>
2023-02-19 23:01:44 +00:00
bors[bot]
4ad255b34b
Merge #1217
1217: Fix a typo in "PioPeripheral" r=Dirbaio a=SekoiaTree

Renames "PioPeripherial" to "PioPeripheral" (without the second i).

Co-authored-by: sekoia <sequoia.1009@gmail.com>
2023-02-19 22:46:57 +00:00
Dario Nieuwenhuis
272982ee54 examples/stm32wb: fix linker script.
cortex-m-rt 0.7.2 now enforces the stack is 8-byte aligned. Stack is placed
at `ORIGIN(RAM) + LENGTH(RAM)` by default, which wasn't 8-byte-aligned. See https://github.com/rust-embedded/cortex-m/discussions/469

ST trims 8 bytes from start of RAM, and uses the whole 192kb, so let's just
copy that:

bceb1dae09/Drivers/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb55xx_flash_cm4.ld (L48)
2023-02-19 23:02:31 +01:00
chemicstry
a53f525f51 stm32/sdmmc: Fix SDIOv1 writes 2023-02-18 01:37:06 +02:00
sekoia
e641db1f75 Fix a typo in "PioPeripheral" 2023-02-15 14:10:07 +01:00
Dario Nieuwenhuis
76642b3a3c fix h7 examples 2023-02-10 23:35:44 +01:00
Dario Nieuwenhuis
a509af4bc0 exmaples/dns: don't use the socket. 2023-02-10 23:00:16 +01:00
Ulf Lilleengen
cd440a49d6
Rewrite to use a single socket 2023-02-10 17:46:08 +01:00
Ulf Lilleengen
9cfea693ed
Add DNS socket to embassy-net 2023-02-10 17:45:03 +01:00
Dario Nieuwenhuis
86487db5d1 usb: use InterfaceNumber in msos. 2023-02-08 00:30:53 +01:00
Dario Nieuwenhuis
3af991ab63 usb: unify ControlHandler+DeviceStateHandler, route all control requests to all handlers.
- Allows classes to handle vendor requests.
- Allows classes to use a single handler for multiple interfaces.
- Allows classes to access the other events (previously only `reset` was available).
2023-02-08 00:17:08 +01:00
alexmoon
aa21aebb0b Lazily encode UTF16 values and add docs 2023-02-07 14:24:35 -05:00
alexmoon
9f9230ae7a Convert MS OS descriptor builder to a writer API
This brings it inline with the other embassy-usb descriptor APIs and allows it to integrate well with the Builder to allow class constructors to add MS OS descriptors.

Also adds a `usb_serial_winusb` example to demonstrate how to use the API.
2023-02-07 14:24:35 -05:00
Dario Nieuwenhuis
b5cf332cc0 nrf: docs. 2023-02-01 01:17:41 +01:00
bors[bot]
ffa75e1e39
Merge #1173 #1174
1173: nRF examples crates names r=lulf a=davidedellagiustina

Fixed nRF examples crates' names: they had the same names and they were conflicting during compilation (Cargo warning).

1174: add missing copy of icmpv6 checksum r=lulf a=lulf

add proto-ipv6 feature to stm32h7 example to catch issues in CI

Co-authored-by: Davide Della Giustina <davide@dellagiustina.com>
Co-authored-by: Ulf Lilleengen <lulf@redhat.com>
2023-01-24 09:26:21 +00:00
Ulf Lilleengen
2a0ea52878
add missing copy of icmpv6 checksum
add proto-ipv6 feature to stm32h7 example to catch issues in CI
2023-01-24 10:25:37 +01:00
Davide Della Giustina
32bdc54ccb
Changed crates' names for nrf examples since they were conflicting 2023-01-24 08:27:53 +00:00
Dario Nieuwenhuis
fe15a7beee net: allocate space for 2 sockets, needed for dhcp. 2023-01-19 14:44:01 +01:00
Paweł Jan Czochański
8f4fae9b36 Add smoltcp dhcp socket configuration 2023-01-19 14:44:01 +01:00
chemicstry
7d34f4f538 stm32/usb_otg: Add F4 usb_ethernet example 2023-01-18 02:37:02 +02:00
Dario Nieuwenhuis
355761fd68 stm32: add stm32c0 examples. 2023-01-17 21:28:16 +01:00
bors[bot]
b6c8505697
Merge #1142
1142: More rp2040 BufferedUart fixes r=Dirbaio a=timokroeger

* Refactor init code
* Make it possible to drop RX without breaking TX (or vice versa)
* Correctly handle RX buffer full scenario

Co-authored-by: Timo Kröger <timokroeger93@gmail.com>
2023-01-14 00:07:02 +00:00
bors[bot]
b0c8c688c7
Merge #1147
1147: Support codesigning in the firmware updater r=lulf a=huntc

This PR provides a method to verify that firmware has been SHA-512 hashed and signed with a private key given its public key. The implementation provides both [`ed25519-dalek`](https://github.com/dalek-cryptography/ed25519-dalek/blob/main/Cargo.toml) and [`salty`](https://github.com/ycrypto/salty) as the signature verifiers. Either of the `ed25519-dalek` and `ed25519-salty` features is required to enable the functionality from `embassy-boot`.

The `verify_and_mark_updated` method is used in place of `mark_updated` when signing is used via its feature. This avoids the accidental omission of validation where it has been declared as required at compile time. It also keeps the parity of calls at the same number to the previous situation.

The PR permits other types of signature verifiers in the future on the proviso that the [Signature trait](https://github.com/RustCrypto/traits/tree/master/signature) is supported.

Finally, I've updated the CI to include testing `embassy-boot`, which it was doing before. In addition, I've included a unit test for verification based on a `ed25519-dalek` documentation example. This tests both the `dalek` and `salty` implementations.

In terms of code size comparisons, `dalek` adds about 68KiB and `salty` adds about 20KiB. I'm using `salty` myself. I've also tested this out by signing my code with the OpenBSD `signify` utility and then verify it during firmware upload using `salty`.


Co-authored-by: huntc <huntchr@gmail.com>
2023-01-12 20:43:24 +00:00
huntc
b0529bc943 Support codesigning in the firmware updater
This commit provides a method to verify that firmware has been signed with a private key given its public key. The implementation uses ed25519-dalek as the signature verifier. An "ed25519" feature is required to enable the functionality. When disabled (the default), calling the firmware updater's verify method will return a failure.
2023-01-12 13:30:58 +11:00
chemicstry
1af102a1aa stm32 otg: add examples. 2023-01-11 17:58:15 +01:00
Dominik Boehi
2baebabf4d Reduce amount of samples for nrf5340 2023-01-09 22:57:40 +01:00
Dominik Boehi
0a27b6cedb Rename examples/nrf to examples/nrf52840 2023-01-09 22:30:02 +01:00
Dominik Boehi
401185b1d9 Change UART pins for nRF5340 DK 2023-01-08 16:25:51 +01:00
Dominik Boehi
f8afc3c882 Add samples for nrf5340 2023-01-08 15:36:35 +01:00
bors[bot]
3fbedd7c09
Merge #1141
1141: feat: compile bootloader examples for nRF91 r=lulf a=lulf

* Add nRF91 as target in CI builds
* Add example linker scripts for nrf91
* Make less nRF52 assumptions example config
* Add llvm-tools-preview required for cargo objcopy example

Co-authored-by: Ulf Lilleengen <lulf@redhat.com>
2023-01-05 14:06:45 +00:00
Pedro Ferreira
6d4c6e0481 rp2040: add {tx,rx}-only constructors to UART 2023-01-04 21:11:19 +01:00
Timo Kröger
a24037edf9 rp: Fix BufferedUart drop code
Only unregister the interrupt handler when both parts are inactive
2023-01-04 15:59:03 +01:00
Ulf Lilleengen
2332d8cd23
feat: compile bootloader examples for nRF91
* Add nRF91 as target in CI builds
* Add example linker scripts for nrf91
* Make less nRF52 assumptions example config
* Add llvm-tools-preview required for cargo objcopy example
2023-01-04 13:38:43 +01:00
bors[bot]
bf4c0de16a
Merge #1139
1139: Wdt config changes r=lulf a=huntc

Per commits:

* By passing WDT config around we can control it more easily and promote sharing it between files.

* The memory layout of the s140 crept into a number of memory files, which can cause confusion (well, it did for me!).

* Obtaining the current WDT config is useful so that we do not have to duplicate configurations around the place. A constructor method has been introduced that attempts to return the current running WDT config from the WDT peripheral. The bootloader example has also been updated to show how the watchdog can be obtained and used.

Co-authored-by: huntc <huntchr@gmail.com>
2023-01-04 07:44:23 +00:00
huntc
8497f98de2 Provides a means of obtaining the current WDT config
Obtaining the current WDT config is important so that we do not have to duplication configuration around the place. A constructor method has been introduced that returns WDT config in accordance with how the register is presently configured. The bootloader example has also been updated to show the watchdog can be obtained and used.
2023-01-04 12:13:44 +11:00
huntc
6e6c3cbebc Cleaned up some doc and memory layout
The memory layout of the s140 crept into a number of memory files, which can cause confusion.
2023-01-04 10:27:16 +11:00
huntc
651eec0242 Pass WDT config around
By passing WDT config around we can control it more easily and promote sharing it between files.
2023-01-04 10:19:39 +11:00
kalkyl
413f339489 Cleanup 2023-01-03 23:34:50 +01:00
kalkyl
9428c40c8d embassy-boot (rp): Add WatchdogFlash 2023-01-03 22:58:56 +01:00
bors[bot]
0aa2a9ac27
Merge #1093 #1127
1093: Add random example r=Dirbaio a=miathedev

Thanks Lulf for the help!

This should be added as example so other people can look it up easily.

With love,
Mia



1127: clean up doc comment generation r=Dirbaio a=Weshnaw

I noticed that when I created doc comments for my tasks that the doc comments got included on the inner function but not the outer functions, I personally prefer keeping the documentation as clean as possible so this PR aims to hide the inner function and then add doc comments to the outer function.

The actual changes include:
* adding #[doc(hidden)] onto the `task_inner` function
  * I flip flopped on this one because I could imagine someone may want this in their docs, but decided to include but I think arguments could be made either way
* copy the attributes from `task_inner` to `task_outer`
  * I don't work with proc_macros often so I am not entirely sure if the way I went about it is correct but it seems to work fine
    * specifically: using `parse_quote` to create the `task_outer` as a `ItemFn` then duplicating the attributes from `task_inner` to `task_outer`
  * I also am not sure if it's a good idea to duplicate all attributes over, but I honestly wasn't sure how to just get the just doc comment attributes

![OLD doc](https://user-images.githubusercontent.com/3748858/209456006-bfa6d40d-d3bf-4c1d-a2de-cf40828b58e5.png)
![NEW doc](https://user-images.githubusercontent.com/3748858/209456011-995363a3-f5b1-4ea3-9db9-1c566643efcb.png)


Co-authored-by: miathedev <mia@metzler.systems>
Co-authored-by: Brendon Fallquist <bfallquist@gmail.com>
2023-01-02 23:13:41 +00:00
Dario Nieuwenhuis
41d6316984 rp: switch to released 0.2.1 pio crate. 2022-12-26 22:30:22 +01:00
Dario Nieuwenhuis
1f033d509a net: split driver trait to a separate crate. 2022-12-26 04:49:08 +01:00
Dario Nieuwenhuis
72bb9b53a2 net: remove unused pool-x features 2022-12-26 03:34:05 +01:00
kalkyl
e090ab1915 Remove lifetime, use pac fields 2022-12-24 03:22:51 +01:00
kalkyl
eaad0cc1dc embassy-rp: Add Watchdog 2022-12-24 02:51:06 +01:00
kalkyl
787745188c Change log level to debug 2022-12-23 23:14:58 +01:00
kalkyl
aa92ce6dc7 embassy-rp: Add split() to BufferedUart 2022-12-22 23:03:05 +01:00
@imrank03
55d9af71e3 enabled interrupt feature 2022-12-21 11:56:30 +05:30