Update embedded-hal to 1.0.0-rc.3

embassy-boot: Fix formatting for tables

cyw43/Cargo.toml

@@ -23,7 +23,7 @@ cortex-m = "0.7.6"
 cortex-m-rt = "0.7.0"
 futures = { version = "0.3.17", default-features = false, features = ["async-await", "cfg-target-has-atomic", "unstable"] }
 
-embedded-hal-1 = { package = "embedded-hal", version = "1.0.0-rc.2" }
+embedded-hal-1 = { package = "embedded-hal", version = "1.0.0-rc.3" }
 num_enum = { version = "0.5.7", default-features = false }
 
 [package.metadata.embassy_docs]

docs/modules/ROOT/examples/layer-by-layer/blinky-hal/src/main.rs

@@ -9,7 +9,7 @@ use {defmt_rtt as _, panic_probe as _};
 fn main() -> ! {
     let p = embassy_stm32::init(Default::default());
     let mut led = Output::new(p.PB14, Level::High, Speed::VeryHigh);
-    let button = Input::new(p.PC13, Pull::Up);
+    let mut button = Input::new(p.PC13, Pull::Up);
 
     loop {
         if button.is_low() {

docs/modules/ROOT/pages/bootloader.adoc

@@ -45,6 +45,8 @@ The BOOTLOADER_STATE partition must be big enough to store one word per page in
 
 The bootloader has a platform-agnostic part, which implements the power fail safe swapping algorithm given the boundaries set by the partitions. The platform-specific part is a minimal shim that provides additional functionality such as watchdogs or supporting the nRF52 softdevice.
 
+NOTE: The linker scripts for the application and bootloader look similar, but the FLASH region must point to the BOOTLOADER partition for the bootloader, and the ACTIVE partition for the application.
+
 === FirmwareUpdater
 
 The `FirmwareUpdater` is an object for conveniently flashing firmware to the DFU partition and subsequently marking it as being ready for swapping with the active partition on the next reset. Its principle methods are `write_firmware`, which is called once per the size of the flash "write block" (typically 4KiB), and `mark_updated`, which is the final call.
@@ -91,4 +93,4 @@ cp $FIRMWARE_DIR/myfirmware $FIRMWARE_DIR/myfirmware+signed
 tail -n1 $SECRETS_DIR/message.txt.sig | base64 -d -i - | dd ibs=10 skip=1 >> $FIRMWARE_DIR/myfirmware+signed
 ----
 
-Remember, guard the `$SECRETS_DIR/key.sec` key as compromising it means that another party can sign your firmware.
+Remember, guard the `$SECRETS_DIR/key.sec` key as compromising it means that another party can sign your firmware.

embassy-boot/boot/README.md

@@ -8,6 +8,24 @@ The bootloader can be used either as a library or be flashed directly with the d
 
 By design, the bootloader does not provide any network capabilities. Networking capabilities for fetching new firmware can be provided by the user application, using the bootloader as a library for updating the firmware, or by using the bootloader as a library and adding this capability yourself.
 
+## Overview
+
+The bootloader divides the storage into 4 main partitions, configurable when creating the bootloader instance or via linker scripts:
+
+* BOOTLOADER - Where the bootloader is placed. The bootloader itself consumes about 8kB of flash, but if you need to debug it and have space available, increasing this to 24kB will allow you to run the bootloader with probe-rs.
+* ACTIVE - Where the main application is placed. The bootloader will attempt to load the application at the start of this partition. The minimum size required for this partition is the size of your application.
+* DFU - Where the application-to-be-swapped is placed. This partition is written to by the application. This partition must be at least 1 page bigger than the ACTIVE partition.
+* BOOTLOADER STATE - Where the bootloader stores the current state describing if the active and dfu partitions need to be swapped. 
+
+For any partition, the following preconditions are required:
+
+* Partitions must be aligned on the page size.
+* Partitions must be a multiple of the page size.
+
+The linker scripts for the application and bootloader look similar, but the FLASH region must point to the BOOTLOADER partition for the bootloader, and the ACTIVE partition for the application.
+
+For more details on the bootloader, see [the documentation](https://embassy.dev/book/dev/bootloader.html).
+
 ## Hardware support
 
 The bootloader supports different hardware in separate crates:
@@ -16,6 +34,7 @@ The bootloader supports different hardware in separate crates:
 * `embassy-boot-rp` - for the RP2040 microcontrollers.
 * `embassy-boot-stm32` - for the STM32 microcontrollers.
 
+
 ## Minimum supported Rust version (MSRV)
 
 `embassy-boot` is guaranteed to compile on the latest stable Rust version at the time of release. It might compile with older versions but that may change in any new patch release.

embassy-boot/boot/src/boot_loader.rs

@@ -135,51 +135,44 @@ impl<ACTIVE: NorFlash, DFU: NorFlash, STATE: NorFlash> BootLoader<ACTIVE, DFU, S
     /// The provided aligned_buf argument must satisfy any alignment requirements
     /// given by the partition flashes. All flash operations will use this buffer.
     ///
-    /// SWAPPING
+    /// ## SWAPPING
     ///
     /// Assume a flash size of 3 pages for the active partition, and 4 pages for the DFU partition.
     /// The swap index contains the copy progress, as to allow continuation of the copy process on
     /// power failure. The index counter is represented within 1 or more pages (depending on total
-    /// flash size), where a page X is considered swapped if index at location (X + WRITE_SIZE)
+    /// flash size), where a page X is considered swapped if index at location (`X + WRITE_SIZE`)
     /// contains a zero value. This ensures that index updates can be performed atomically and
     /// avoid a situation where the wrong index value is set (page write size is "atomic").
     ///
-    /// +-----------+------------+--------+--------+--------+--------+
+    ///
     /// | Partition | Swap Index | Page 0 | Page 1 | Page 3 | Page 4 |
-    /// +-----------+------------+--------+--------+--------+--------+
+    /// |-----------|------------|--------|--------|--------|--------|
     /// |    Active |          0 |      1 |      2 |      3 |      - |
     /// |       DFU |          0 |      3 |      2 |      1 |      X |
-    /// +-----------+------------+--------+--------+--------+--------+
     ///
     /// The algorithm starts by copying 'backwards', and after the first step, the layout is
     /// as follows:
     ///
-    /// +-----------+------------+--------+--------+--------+--------+
     /// | Partition | Swap Index | Page 0 | Page 1 | Page 3 | Page 4 |
-    /// +-----------+------------+--------+--------+--------+--------+
+    /// |-----------|------------|--------|--------|--------|--------|
     /// |    Active |          1 |      1 |      2 |      1 |      - |
     /// |       DFU |          1 |      3 |      2 |      1 |      3 |
-    /// +-----------+------------+--------+--------+--------+--------+
     ///
     /// The next iteration performs the same steps
     ///
-    /// +-----------+------------+--------+--------+--------+--------+
     /// | Partition | Swap Index | Page 0 | Page 1 | Page 3 | Page 4 |
-    /// +-----------+------------+--------+--------+--------+--------+
+    /// |-----------|------------|--------|--------|--------|--------|
     /// |    Active |          2 |      1 |      2 |      1 |      - |
     /// |       DFU |          2 |      3 |      2 |      2 |      3 |
-    /// +-----------+------------+--------+--------+--------+--------+
     ///
     /// And again until we're done
     ///
-    /// +-----------+------------+--------+--------+--------+--------+
     /// | Partition | Swap Index | Page 0 | Page 1 | Page 3 | Page 4 |
-    /// +-----------+------------+--------+--------+--------+--------+
+    /// |-----------|------------|--------|--------|--------|--------|
     /// |    Active |          3 |      3 |      2 |      1 |      - |
     /// |       DFU |          3 |      3 |      1 |      2 |      3 |
-    /// +-----------+------------+--------+--------+--------+--------+
     ///
-    /// REVERTING
+    /// ## REVERTING
     ///
     /// The reverting algorithm uses the swap index to discover that images were swapped, but that
     /// the application failed to mark the boot successful. In this case, the revert algorithm will
@@ -190,28 +183,21 @@ impl<ACTIVE: NorFlash, DFU: NorFlash, STATE: NorFlash> BootLoader<ACTIVE, DFU, S
     ///
     /// The revert algorithm works forwards, by starting copying into the 'unused' DFU page at the start.
     ///
-    /// +-----------+--------------+--------+--------+--------+--------+
     /// | Partition | Revert Index | Page 0 | Page 1 | Page 3 | Page 4 |
-    //*/
-    /// +-----------+--------------+--------+--------+--------+--------+
+    /// |-----------|--------------|--------|--------|--------|--------|
     /// |    Active |            3 |      1 |      2 |      1 |      - |
     /// |       DFU |            3 |      3 |      1 |      2 |      3 |
-    /// +-----------+--------------+--------+--------+--------+--------+
     ///
     ///
-    /// +-----------+--------------+--------+--------+--------+--------+
     /// | Partition | Revert Index | Page 0 | Page 1 | Page 3 | Page 4 |
-    /// +-----------+--------------+--------+--------+--------+--------+
+    /// |-----------|--------------|--------|--------|--------|--------|
     /// |    Active |            3 |      1 |      2 |      1 |      - |
     /// |       DFU |            3 |      3 |      2 |      2 |      3 |
-    /// +-----------+--------------+--------+--------+--------+--------+
     ///
-    /// +-----------+--------------+--------+--------+--------+--------+
     /// | Partition | Revert Index | Page 0 | Page 1 | Page 3 | Page 4 |
-    /// +-----------+--------------+--------+--------+--------+--------+
+    /// |-----------|--------------|--------|--------|--------|--------|
     /// |    Active |            3 |      1 |      2 |      3 |      - |
     /// |       DFU |            3 |      3 |      2 |      1 |      3 |
-    /// +-----------+--------------+--------+--------+--------+--------+
     ///
     pub fn prepare_boot(&mut self, aligned_buf: &mut [u8]) -> Result<State, BootError> {
         // Ensure we have enough progress pages to store copy progress
@@ -224,6 +210,7 @@ impl<ACTIVE: NorFlash, DFU: NorFlash, STATE: NorFlash> BootLoader<ACTIVE, DFU, S
         assert_eq!(0, aligned_buf.len() % ACTIVE::WRITE_SIZE);
         assert_eq!(0, aligned_buf.len() % DFU::WRITE_SIZE);
 
+        // Ensure our partitions are able to handle boot operations
         assert_partitions(&self.active, &self.dfu, &self.state, Self::PAGE_SIZE);
 
         // Copy contents from partition N to active
@@ -398,6 +385,7 @@ fn assert_partitions<ACTIVE: NorFlash, DFU: NorFlash, STATE: NorFlash>(
 ) {
     assert_eq!(active.capacity() as u32 % page_size, 0);
     assert_eq!(dfu.capacity() as u32 % page_size, 0);
+    // DFU partition has to be bigger than ACTIVE partition to handle swap algorithm
     assert!(dfu.capacity() as u32 - active.capacity() as u32 >= page_size);
     assert!(2 + 2 * (active.capacity() as u32 / page_size) <= state.capacity() as u32 / STATE::WRITE_SIZE as u32);
 }

embassy-embedded-hal/Cargo.toml

@@ -23,8 +23,8 @@ embassy-time = { version = "0.2", path = "../embassy-time", optional = true }
 embedded-hal-02 = { package = "embedded-hal", version = "0.2.6", features = [
     "unproven",
 ] }
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
-embedded-hal-async = { version = "=1.0.0-rc.2" }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.3" }
+embedded-hal-async = { version = "=1.0.0-rc.3" }
 embedded-storage = "0.3.1"
 embedded-storage-async = { version = "0.4.1" }
 nb = "1.0.0"

embassy-net-adin1110/Cargo.toml

@@ -13,16 +13,16 @@ edition = "2021"
 heapless = "0.8"
 defmt = { version = "0.3", optional = true }
 log = { version = "0.4", default-features = false, optional = true }
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
-embedded-hal-async = { version = "=1.0.0-rc.2" }
-embedded-hal-bus = { version = "=0.1.0-rc.2", features = ["async"] }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.3" }
+embedded-hal-async = { version = "=1.0.0-rc.3" }
+embedded-hal-bus = { version = "=0.1.0-rc.3", features = ["async"] }
 embassy-net-driver-channel = { version = "0.2.0", path = "../embassy-net-driver-channel" }
 embassy-time = { version = "0.2", path = "../embassy-time" }
 embassy-futures = { version = "0.1.0", path = "../embassy-futures" }
 bitfield = "0.14.0"
 
 [dev-dependencies]
-embedded-hal-mock = { git = "https://github.com/Dirbaio/embedded-hal-mock", rev = "c5c4dca18e043e6386aee02173f61a65fea3981e", features = ["embedded-hal-async", "eh1"] }
+embedded-hal-mock = { git = "https://github.com/Dirbaio/embedded-hal-mock", rev = "b5a2274759a8c484f4fae71a22f8a083fdd9d5da", features = ["embedded-hal-async", "eh1"] }
 crc = "3.0.1"
 env_logger = "0.10"
 critical-section = { version = "1.1.2", features = ["std"] }

embassy-net-enc28j60/Cargo.toml

@@ -8,8 +8,8 @@ license = "MIT OR Apache-2.0"
 edition = "2021"
 
 [dependencies]
-embedded-hal = { version = "1.0.0-rc.2" }
-embedded-hal-async = { version = "=1.0.0-rc.2" }
+embedded-hal = { version = "1.0.0-rc.3" }
+embedded-hal-async = { version = "=1.0.0-rc.3" }
 embassy-net-driver = { version = "0.2.0", path = "../embassy-net-driver" }
 embassy-time = { version = "0.2", path = "../embassy-time" }
 embassy-futures = { version = "0.1.0", path = "../embassy-futures" }

embassy-net-esp-hosted/Cargo.toml

@@ -12,8 +12,8 @@ embassy-sync = { version = "0.5.0", path = "../embassy-sync"}
 embassy-futures = { version = "0.1.0", path = "../embassy-futures"}
 embassy-net-driver-channel = { version = "0.2.0", path = "../embassy-net-driver-channel"}
 
-embedded-hal = { version = "1.0.0-rc.2" }
-embedded-hal-async = { version = "=1.0.0-rc.2" }
+embedded-hal = { version = "1.0.0-rc.3" }
+embedded-hal-async = { version = "=1.0.0-rc.3" }
 
 noproto = { git="https://github.com/embassy-rs/noproto", rev = "f5e6d1f325b6ad4e344f60452b09576e24671f62", default-features = false, features = ["derive"] }
 #noproto = { version = "0.1", path = "/home/dirbaio/noproto", default-features = false, features = ["derive"] }

embassy-net-wiznet/Cargo.toml

@@ -8,8 +8,8 @@ license = "MIT OR Apache-2.0"
 edition = "2021"
 
 [dependencies]
-embedded-hal = { version = "1.0.0-rc.2" }
-embedded-hal-async = { version = "=1.0.0-rc.2" }
+embedded-hal = { version = "1.0.0-rc.3" }
+embedded-hal-async = { version = "=1.0.0-rc.3" }
 embassy-net-driver-channel = { version = "0.2.0", path = "../embassy-net-driver-channel" }
 embassy-time = { version = "0.2", path = "../embassy-time" }
 embassy-futures = { version = "0.1.0", path = "../embassy-futures" }

embassy-nrf/Cargo.toml

@@ -94,8 +94,8 @@ embassy-embedded-hal = {version = "0.1.0", path = "../embassy-embedded-hal" }
 embassy-usb-driver = {version = "0.1.0", path = "../embassy-usb-driver" }
 
 embedded-hal-02 = { package = "embedded-hal", version = "0.2.6", features = ["unproven"] }
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
-embedded-hal-async = { version = "=1.0.0-rc.2" }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.3" }
+embedded-hal-async = { version = "=1.0.0-rc.3" }
 embedded-io = { version = "0.6.0" }
 embedded-io-async = { version = "0.6.1" }
 
@@ -120,4 +120,3 @@ nrf52840-pac = { version = "0.12.0", optional = true }
 nrf5340-app-pac = { version = "0.12.0", optional = true }
 nrf5340-net-pac = { version = "0.12.0", optional = true }
 nrf9160-pac = { version = "0.12.0", optional = true }
-

embassy-nrf/src/gpio.rs

@@ -52,19 +52,19 @@ impl<'d, T: Pin> Input<'d, T> {
 
     /// Test if current pin level is high.
     #[inline]
-    pub fn is_high(&self) -> bool {
+    pub fn is_high(&mut self) -> bool {
         self.pin.is_high()
     }
 
     /// Test if current pin level is low.
     #[inline]
-    pub fn is_low(&self) -> bool {
+    pub fn is_low(&mut self) -> bool {
         self.pin.is_low()
     }
 
     /// Returns current pin level
     #[inline]
-    pub fn get_level(&self) -> Level {
+    pub fn get_level(&mut self) -> Level {
         self.pin.get_level()
     }
 }
@@ -160,19 +160,19 @@ impl<'d, T: Pin> Output<'d, T> {
 
     /// Is the output pin set as high?
     #[inline]
-    pub fn is_set_high(&self) -> bool {
+    pub fn is_set_high(&mut self) -> bool {
         self.pin.is_set_high()
     }
 
     /// Is the output pin set as low?
     #[inline]
-    pub fn is_set_low(&self) -> bool {
+    pub fn is_set_low(&mut self) -> bool {
         self.pin.is_set_low()
     }
 
     /// What level output is set to
     #[inline]
-    pub fn get_output_level(&self) -> Level {
+    pub fn get_output_level(&mut self) -> Level {
         self.pin.get_output_level()
     }
 }
@@ -277,19 +277,24 @@ impl<'d, T: Pin> Flex<'d, T> {
 
     /// Test if current pin level is high.
     #[inline]
-    pub fn is_high(&self) -> bool {
+    pub fn is_high(&mut self) -> bool {
         !self.is_low()
     }
 
     /// Test if current pin level is low.
     #[inline]
-    pub fn is_low(&self) -> bool {
+    pub fn is_low(&mut self) -> bool {
+        self.ref_is_low()
+    }
+
+    #[inline]
+    pub(crate) fn ref_is_low(&self) -> bool {
         self.pin.block().in_.read().bits() & (1 << self.pin.pin()) == 0
     }
 
     /// Returns current pin level
     #[inline]
-    pub fn get_level(&self) -> Level {
+    pub fn get_level(&mut self) -> Level {
         self.is_high().into()
     }
 
@@ -316,19 +321,25 @@ impl<'d, T: Pin> Flex<'d, T> {
 
     /// Is the output pin set as high?
     #[inline]
-    pub fn is_set_high(&self) -> bool {
+    pub fn is_set_high(&mut self) -> bool {
         !self.is_set_low()
     }
 
     /// Is the output pin set as low?
     #[inline]
-    pub fn is_set_low(&self) -> bool {
+    pub fn is_set_low(&mut self) -> bool {
+        self.ref_is_set_low()
+    }
+
+    /// Is the output pin set as low?
+    #[inline]
+    pub(crate) fn ref_is_set_low(&self) -> bool {
         self.pin.block().out.read().bits() & (1 << self.pin.pin()) == 0
     }
 
     /// What level output is set to
     #[inline]
-    pub fn get_output_level(&self) -> Level {
+    pub fn get_output_level(&mut self) -> Level {
         self.is_set_high().into()
     }
 }
@@ -498,11 +509,11 @@ mod eh02 {
         type Error = Infallible;
 
         fn is_high(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_high())
+            Ok(!self.pin.ref_is_low())
         }
 
         fn is_low(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_low())
+            Ok(self.pin.ref_is_low())
         }
     }
 
@@ -520,11 +531,11 @@ mod eh02 {
 
     impl<'d, T: Pin> embedded_hal_02::digital::v2::StatefulOutputPin for Output<'d, T> {
         fn is_set_high(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_set_high())
+            Ok(!self.pin.ref_is_set_low())
         }
 
         fn is_set_low(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_set_low())
+            Ok(self.pin.ref_is_set_low())
         }
     }
 
@@ -535,11 +546,11 @@ mod eh02 {
         type Error = Infallible;
 
         fn is_high(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_high())
+            Ok(!self.ref_is_low())
         }
 
         fn is_low(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_low())
+            Ok(self.ref_is_low())
         }
     }
 
@@ -557,11 +568,11 @@ mod eh02 {
 
     impl<'d, T: Pin> embedded_hal_02::digital::v2::StatefulOutputPin for Flex<'d, T> {
         fn is_set_high(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_set_high())
+            Ok(!self.ref_is_set_low())
         }
 
         fn is_set_low(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_set_low())
+            Ok(self.ref_is_set_low())
         }
     }
 }
@@ -571,11 +582,11 @@ impl<'d, T: Pin> embedded_hal_1::digital::ErrorType for Input<'d, T> {
 }
 
 impl<'d, T: Pin> embedded_hal_1::digital::InputPin for Input<'d, T> {
-    fn is_high(&self) -> Result<bool, Self::Error> {
+    fn is_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_high())
     }
 
-    fn is_low(&self) -> Result<bool, Self::Error> {
+    fn is_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_low())
     }
 }
@@ -595,11 +606,11 @@ impl<'d, T: Pin> embedded_hal_1::digital::OutputPin for Output<'d, T> {
 }
 
 impl<'d, T: Pin> embedded_hal_1::digital::StatefulOutputPin for Output<'d, T> {
-    fn is_set_high(&self) -> Result<bool, Self::Error> {
+    fn is_set_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_high())
     }
 
-    fn is_set_low(&self) -> Result<bool, Self::Error> {
+    fn is_set_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_low())
     }
 }
@@ -612,11 +623,11 @@ impl<'d, T: Pin> embedded_hal_1::digital::ErrorType for Flex<'d, T> {
 ///
 /// If the pin is not in input mode the result is unspecified.
 impl<'d, T: Pin> embedded_hal_1::digital::InputPin for Flex<'d, T> {
-    fn is_high(&self) -> Result<bool, Self::Error> {
+    fn is_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_high())
     }
 
-    fn is_low(&self) -> Result<bool, Self::Error> {
+    fn is_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_low())
     }
 }
@@ -632,11 +643,11 @@ impl<'d, T: Pin> embedded_hal_1::digital::OutputPin for Flex<'d, T> {
 }
 
 impl<'d, T: Pin> embedded_hal_1::digital::StatefulOutputPin for Flex<'d, T> {
-    fn is_set_high(&self) -> Result<bool, Self::Error> {
+    fn is_set_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_high())
     }
 
-    fn is_set_low(&self) -> Result<bool, Self::Error> {
+    fn is_set_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_low())
     }
 }

embassy-nrf/src/gpiote.rs

@@ -243,7 +243,7 @@ impl<'d, C: Channel, T: GpioPin> Drop for OutputChannel<'d, C, T> {
 
 impl<'d, C: Channel, T: GpioPin> OutputChannel<'d, C, T> {
     /// Create a new GPIOTE output channel driver.
-    pub fn new(ch: impl Peripheral<P = C> + 'd, pin: Output<'d, T>, polarity: OutputChannelPolarity) -> Self {
+    pub fn new(ch: impl Peripheral<P = C> + 'd, mut pin: Output<'d, T>, polarity: OutputChannelPolarity) -> Self {
         into_ref!(ch);
         let g = regs();
         let num = ch.number();
@@ -481,11 +481,11 @@ mod eh02 {
         type Error = Infallible;
 
         fn is_high(&self) -> Result<bool, Self::Error> {
-            Ok(self.pin.is_high())
+            Ok(!self.pin.pin.ref_is_low())
         }
 
         fn is_low(&self) -> Result<bool, Self::Error> {
-            Ok(self.pin.is_low())
+            Ok(self.pin.pin.ref_is_low())
         }
     }
 }
@@ -495,11 +495,11 @@ impl<'d, C: Channel, T: GpioPin> embedded_hal_1::digital::ErrorType for InputCha
 }
 
 impl<'d, C: Channel, T: GpioPin> embedded_hal_1::digital::InputPin for InputChannel<'d, C, T> {
-    fn is_high(&self) -> Result<bool, Self::Error> {
+    fn is_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.pin.is_high())
     }
 
-    fn is_low(&self) -> Result<bool, Self::Error> {
+    fn is_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.pin.is_low())
     }
 }

embassy-rp/Cargo.toml

@@ -78,9 +78,9 @@ fixed = "1.23.1"
 rp-pac = { version = "6" }
 
 embedded-hal-02 = { package = "embedded-hal", version = "0.2.6", features = ["unproven"] }
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
-embedded-hal-async = { version = "=1.0.0-rc.2" }
-embedded-hal-nb = { version = "=1.0.0-rc.2" }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.3" }
+embedded-hal-async = { version = "=1.0.0-rc.3" }
+embedded-hal-nb = { version = "=1.0.0-rc.3" }
 
 pio-proc = {version= "0.2" }
 pio = {version= "0.2.1" }

embassy-rp/src/gpio.rs

@@ -105,18 +105,18 @@ impl<'d, T: Pin> Input<'d, T> {
     }
 
     #[inline]
-    pub fn is_high(&self) -> bool {
+    pub fn is_high(&mut self) -> bool {
         self.pin.is_high()
     }
 
     #[inline]
-    pub fn is_low(&self) -> bool {
+    pub fn is_low(&mut self) -> bool {
         self.pin.is_low()
     }
 
     /// Returns current pin level
     #[inline]
-    pub fn get_level(&self) -> Level {
+    pub fn get_level(&mut self) -> Level {
         self.pin.get_level()
     }
 
@@ -357,19 +357,19 @@ impl<'d, T: Pin> Output<'d, T> {
 
     /// Is the output pin set as high?
     #[inline]
-    pub fn is_set_high(&self) -> bool {
+    pub fn is_set_high(&mut self) -> bool {
         self.pin.is_set_high()
     }
 
     /// Is the output pin set as low?
     #[inline]
-    pub fn is_set_low(&self) -> bool {
+    pub fn is_set_low(&mut self) -> bool {
         self.pin.is_set_low()
     }
 
     /// What level output is set to
     #[inline]
-    pub fn get_output_level(&self) -> Level {
+    pub fn get_output_level(&mut self) -> Level {
         self.pin.get_output_level()
     }
 
@@ -434,19 +434,19 @@ impl<'d, T: Pin> OutputOpenDrain<'d, T> {
 
     /// Is the output level high?
     #[inline]
-    pub fn is_set_high(&self) -> bool {
+    pub fn is_set_high(&mut self) -> bool {
         !self.is_set_low()
     }
 
     /// Is the output level low?
     #[inline]
-    pub fn is_set_low(&self) -> bool {
+    pub fn is_set_low(&mut self) -> bool {
         self.pin.is_set_as_output()
     }
 
     /// What level output is set to
     #[inline]
-    pub fn get_output_level(&self) -> Level {
+    pub fn get_output_level(&mut self) -> Level {
         self.is_set_high().into()
     }
 
@@ -457,18 +457,18 @@ impl<'d, T: Pin> OutputOpenDrain<'d, T> {
     }
 
     #[inline]
-    pub fn is_high(&self) -> bool {
+    pub fn is_high(&mut self) -> bool {
         self.pin.is_high()
     }
 
     #[inline]
-    pub fn is_low(&self) -> bool {
+    pub fn is_low(&mut self) -> bool {
         self.pin.is_low()
     }
 
     /// Returns current pin level
     #[inline]
-    pub fn get_level(&self) -> Level {
+    pub fn get_level(&mut self) -> Level {
         self.is_high().into()
     }
 
@@ -590,7 +590,12 @@ impl<'d, T: Pin> Flex<'d, T> {
     }
 
     #[inline]
-    fn is_set_as_output(&self) -> bool {
+    pub fn is_set_as_output(&mut self) -> bool {
+        self.ref_is_set_as_output()
+    }
+
+    #[inline]
+    pub(crate) fn ref_is_set_as_output(&self) -> bool {
         (self.pin.sio_oe().value().read() & self.bit()) != 0
     }
 
@@ -600,18 +605,23 @@ impl<'d, T: Pin> Flex<'d, T> {
     }
 
     #[inline]
-    pub fn is_high(&self) -> bool {
+    pub fn is_high(&mut self) -> bool {
         !self.is_low()
     }
 
     #[inline]
-    pub fn is_low(&self) -> bool {
+    pub fn is_low(&mut self) -> bool {
+        self.ref_is_low()
+    }
+
+    #[inline]
+    pub(crate) fn ref_is_low(&self) -> bool {
         self.pin.sio_in().read() & self.bit() == 0
     }
 
     /// Returns current pin level
     #[inline]
-    pub fn get_level(&self) -> Level {
+    pub fn get_level(&mut self) -> Level {
         self.is_high().into()
     }
 
@@ -638,19 +648,24 @@ impl<'d, T: Pin> Flex<'d, T> {
 
     /// Is the output level high?
     #[inline]
-    pub fn is_set_high(&self) -> bool {
+    pub fn is_set_high(&mut self) -> bool {
         !self.is_set_low()
     }
 
     /// Is the output level low?
     #[inline]
-    pub fn is_set_low(&self) -> bool {
+    pub fn is_set_low(&mut self) -> bool {
+        self.ref_is_set_low()
+    }
+
+    #[inline]
+    pub(crate) fn ref_is_set_low(&self) -> bool {
         (self.pin.sio_out().value().read() & self.bit()) == 0
     }
 
     /// What level output is set to
     #[inline]
-    pub fn get_output_level(&self) -> Level {
+    pub fn get_output_level(&mut self) -> Level {
         self.is_set_high().into()
     }
 
@@ -912,11 +927,11 @@ mod eh02 {
         type Error = Infallible;
 
         fn is_high(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_high())
+            Ok(!self.pin.ref_is_low())
         }
 
         fn is_low(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_low())
+            Ok(self.pin.ref_is_low())
         }
     }
 
@@ -934,11 +949,11 @@ mod eh02 {
 
     impl<'d, T: Pin> embedded_hal_02::digital::v2::StatefulOutputPin for Output<'d, T> {
         fn is_set_high(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_set_high())
+            Ok(!self.pin.ref_is_set_low())
         }
 
         fn is_set_low(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_set_low())
+            Ok(self.pin.ref_is_set_low())
         }
     }
 
@@ -954,11 +969,11 @@ mod eh02 {
         type Error = Infallible;
 
         fn is_high(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_high())
+            Ok(!self.pin.ref_is_low())
         }
 
         fn is_low(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_low())
+            Ok(self.pin.ref_is_low())
         }
     }
 
@@ -978,11 +993,11 @@ mod eh02 {
 
     impl<'d, T: Pin> embedded_hal_02::digital::v2::StatefulOutputPin for OutputOpenDrain<'d, T> {
         fn is_set_high(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_set_high())
+            Ok(!self.pin.ref_is_set_as_output())
         }
 
         fn is_set_low(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_set_low())
+            Ok(self.pin.ref_is_set_as_output())
         }
     }
 
@@ -998,11 +1013,11 @@ mod eh02 {
         type Error = Infallible;
 
         fn is_high(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_high())
+            Ok(!self.ref_is_low())
         }
 
         fn is_low(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_low())
+            Ok(self.ref_is_low())
         }
     }
 
@@ -1020,11 +1035,11 @@ mod eh02 {
 
     impl<'d, T: Pin> embedded_hal_02::digital::v2::StatefulOutputPin for Flex<'d, T> {
         fn is_set_high(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_set_high())
+            Ok(!self.ref_is_set_low())
         }
 
         fn is_set_low(&self) -> Result<bool, Self::Error> {
-            Ok(self.is_set_low())
+            Ok(self.ref_is_set_low())
         }
     }
 
@@ -1042,11 +1057,11 @@ impl<'d, T: Pin> embedded_hal_1::digital::ErrorType for Input<'d, T> {
 }
 
 impl<'d, T: Pin> embedded_hal_1::digital::InputPin for Input<'d, T> {
-    fn is_high(&self) -> Result<bool, Self::Error> {
+    fn is_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_high())
     }
 
-    fn is_low(&self) -> Result<bool, Self::Error> {
+    fn is_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_low())
     }
 }
@@ -1066,11 +1081,11 @@ impl<'d, T: Pin> embedded_hal_1::digital::OutputPin for Output<'d, T> {
 }
 
 impl<'d, T: Pin> embedded_hal_1::digital::StatefulOutputPin for Output<'d, T> {
-    fn is_set_high(&self) -> Result<bool, Self::Error> {
+    fn is_set_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_high())
     }
 
-    fn is_set_low(&self) -> Result<bool, Self::Error> {
+    fn is_set_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_low())
     }
 }
@@ -1096,11 +1111,11 @@ impl<'d, T: Pin> embedded_hal_1::digital::OutputPin for OutputOpenDrain<'d, T> {
 }
 
 impl<'d, T: Pin> embedded_hal_1::digital::StatefulOutputPin for OutputOpenDrain<'d, T> {
-    fn is_set_high(&self) -> Result<bool, Self::Error> {
+    fn is_set_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_high())
     }
 
-    fn is_set_low(&self) -> Result<bool, Self::Error> {
+    fn is_set_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_low())
     }
 }
@@ -1112,11 +1127,11 @@ impl<'d, T: Pin> embedded_hal_1::digital::ToggleableOutputPin for OutputOpenDrai
 }
 
 impl<'d, T: Pin> embedded_hal_1::digital::InputPin for OutputOpenDrain<'d, T> {
-    fn is_high(&self) -> Result<bool, Self::Error> {
+    fn is_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_high())
     }
 
-    fn is_low(&self) -> Result<bool, Self::Error> {
+    fn is_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_low())
     }
 }
@@ -1126,11 +1141,11 @@ impl<'d, T: Pin> embedded_hal_1::digital::ErrorType for Flex<'d, T> {
 }
 
 impl<'d, T: Pin> embedded_hal_1::digital::InputPin for Flex<'d, T> {
-    fn is_high(&self) -> Result<bool, Self::Error> {
+    fn is_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_high())
     }
 
-    fn is_low(&self) -> Result<bool, Self::Error> {
+    fn is_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_low())
     }
 }
@@ -1146,11 +1161,11 @@ impl<'d, T: Pin> embedded_hal_1::digital::OutputPin for Flex<'d, T> {
 }
 
 impl<'d, T: Pin> embedded_hal_1::digital::StatefulOutputPin for Flex<'d, T> {
-    fn is_set_high(&self) -> Result<bool, Self::Error> {
+    fn is_set_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_high())
     }
 
-    fn is_set_low(&self) -> Result<bool, Self::Error> {
+    fn is_set_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_low())
     }
 }

embassy-stm32/Cargo.toml

@@ -42,9 +42,9 @@ embassy-usb-driver = {version = "0.1.0", path = "../embassy-usb-driver" }
 embassy-executor = { version = "0.4.0", path = "../embassy-executor", optional = true }
 
 embedded-hal-02 = { package = "embedded-hal", version = "0.2.6", features = ["unproven"] }
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
-embedded-hal-async = { version = "=1.0.0-rc.2" }
-embedded-hal-nb = { version = "=1.0.0-rc.2" }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.3" }
+embedded-hal-async = { version = "=1.0.0-rc.3" }
+embedded-hal-nb = { version = "=1.0.0-rc.3" }
 
 embedded-storage = "0.3.1"
 embedded-storage-async = { version = "0.4.1" }
@@ -120,6 +120,10 @@ time-driver-tim3 = ["_time-driver"]
 time-driver-tim4 = ["_time-driver"]
 ## Use TIM5 as time driver
 time-driver-tim5 = ["_time-driver"]
+## Use TIM9 as time driver
+time-driver-tim9 = ["_time-driver"]
+## Use TIM11 as time driver
+time-driver-tim11 = ["_time-driver"]
 ## Use TIM12 as time driver
 time-driver-tim12 = ["_time-driver"]
 ## Use TIM15 as time driver

embassy-stm32/build.rs

@@ -187,6 +187,8 @@ fn main() {
         Some("tim3") => "TIM3",
         Some("tim4") => "TIM4",
         Some("tim5") => "TIM5",
+        Some("tim9") => "TIM9",
+        Some("tim11") => "TIM11",
         Some("tim12") => "TIM12",
         Some("tim15") => "TIM15",
         Some("any") => {
@@ -198,12 +200,16 @@ fn main() {
                 "TIM4"
             } else if singletons.contains(&"TIM5".to_string()) {
                 "TIM5"
+            } else if singletons.contains(&"TIM9".to_string()) {
+                "TIM9"
+            } else if singletons.contains(&"TIM11".to_string()) {
+                "TIM11"
             } else if singletons.contains(&"TIM12".to_string()) {
                 "TIM12"
             } else if singletons.contains(&"TIM15".to_string()) {
                 "TIM15"
             } else {
-                panic!("time-driver-any requested, but the chip doesn't have TIM2, TIM3, TIM4, TIM5, TIM12 or TIM15.")
+                panic!("time-driver-any requested, but the chip doesn't have TIM2, TIM3, TIM4, TIM5, TIM9, TIM11, TIM12 or TIM15.")
             }
         }
         _ => panic!("unknown time_driver {:?}", time_driver),

embassy-stm32/src/exti.rs

@@ -97,15 +97,15 @@ impl<'d, T: GpioPin> ExtiInput<'d, T> {
         Self { pin }
     }
 
-    pub fn is_high(&self) -> bool {
+    pub fn is_high(&mut self) -> bool {
         self.pin.is_high()
     }
 
-    pub fn is_low(&self) -> bool {
+    pub fn is_low(&mut self) -> bool {
         self.pin.is_low()
     }
 
-    pub fn get_level(&self) -> Level {
+    pub fn get_level(&mut self) -> Level {
         self.pin.get_level()
     }
 
@@ -142,11 +142,11 @@ impl<'d, T: GpioPin> embedded_hal_02::digital::v2::InputPin for ExtiInput<'d, T>
     type Error = Infallible;
 
     fn is_high(&self) -> Result<bool, Self::Error> {
-        Ok(self.is_high())
+        Ok(!self.pin.pin.ref_is_low())
     }
 
     fn is_low(&self) -> Result<bool, Self::Error> {
-        Ok(self.is_low())
+        Ok(self.pin.pin.ref_is_low())
     }
 }
 
@@ -155,11 +155,11 @@ impl<'d, T: GpioPin> embedded_hal_1::digital::ErrorType for ExtiInput<'d, T> {
 }
 
 impl<'d, T: GpioPin> embedded_hal_1::digital::InputPin for ExtiInput<'d, T> {
-    fn is_high(&self) -> Result<bool, Self::Error> {
+    fn is_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_high())
     }
 
-    fn is_low(&self) -> Result<bool, Self::Error> {
+    fn is_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_low())
     }
 }

embassy-stm32/src/gpio.rs

@@ -142,36 +142,46 @@ impl<'d, T: Pin> Flex<'d, T> {
     }
 
     #[inline]
-    pub fn is_high(&self) -> bool {
-        !self.is_low()
+    pub fn is_high(&mut self) -> bool {
+        !self.ref_is_low()
     }
 
     #[inline]
-    pub fn is_low(&self) -> bool {
+    pub fn is_low(&mut self) -> bool {
+        self.ref_is_low()
+    }
+
+    #[inline]
+    pub(crate) fn ref_is_low(&self) -> bool {
         let state = self.pin.block().idr().read().idr(self.pin.pin() as _);
         state == vals::Idr::LOW
     }
 
     #[inline]
-    pub fn get_level(&self) -> Level {
+    pub fn get_level(&mut self) -> Level {
         self.is_high().into()
     }
 
     #[inline]
-    pub fn is_set_high(&self) -> bool {
-        !self.is_set_low()
+    pub fn is_set_high(&mut self) -> bool {
+        !self.ref_is_set_low()
     }
 
     /// Is the output pin set as low?
     #[inline]
-    pub fn is_set_low(&self) -> bool {
+    pub fn is_set_low(&mut self) -> bool {
+        self.ref_is_set_low()
+    }
+
+    #[inline]
+    pub(crate) fn ref_is_set_low(&self) -> bool {
         let state = self.pin.block().odr().read().odr(self.pin.pin() as _);
         state == vals::Odr::LOW
     }
 
     /// What level output is set to
     #[inline]
-    pub fn get_output_level(&self) -> Level {
+    pub fn get_output_level(&mut self) -> Level {
         self.is_set_high().into()
     }
 
@@ -310,17 +320,17 @@ impl<'d, T: Pin> Input<'d, T> {
     }
 
     #[inline]
-    pub fn is_high(&self) -> bool {
+    pub fn is_high(&mut self) -> bool {
         self.pin.is_high()
     }
 
     #[inline]
-    pub fn is_low(&self) -> bool {
+    pub fn is_low(&mut self) -> bool {
         self.pin.is_low()
     }
 
     #[inline]
-    pub fn get_level(&self) -> Level {
+    pub fn get_level(&mut self) -> Level {
         self.pin.get_level()
     }
 }
@@ -399,19 +409,19 @@ impl<'d, T: Pin> Output<'d, T> {
 
     /// Is the output pin set as high?
     #[inline]
-    pub fn is_set_high(&self) -> bool {
+    pub fn is_set_high(&mut self) -> bool {
         self.pin.is_set_high()
     }
 
     /// Is the output pin set as low?
     #[inline]
-    pub fn is_set_low(&self) -> bool {
+    pub fn is_set_low(&mut self) -> bool {
         self.pin.is_set_low()
     }
 
     /// What level output is set to
     #[inline]
-    pub fn get_output_level(&self) -> Level {
+    pub fn get_output_level(&mut self) -> Level {
         self.pin.get_output_level()
     }
 
@@ -453,18 +463,18 @@ impl<'d, T: Pin> OutputOpenDrain<'d, T> {
     }
 
     #[inline]
-    pub fn is_high(&self) -> bool {
+    pub fn is_high(&mut self) -> bool {
         !self.pin.is_low()
     }
 
     #[inline]
-    pub fn is_low(&self) -> bool {
+    pub fn is_low(&mut self) -> bool {
         self.pin.is_low()
     }
 
     /// Returns current pin level
     #[inline]
-    pub fn get_level(&self) -> Level {
+    pub fn get_level(&mut self) -> Level {
         self.pin.get_level()
     }
 
@@ -488,19 +498,19 @@ impl<'d, T: Pin> OutputOpenDrain<'d, T> {
 
     /// Is the output pin set as high?
     #[inline]
-    pub fn is_set_high(&self) -> bool {
+    pub fn is_set_high(&mut self) -> bool {
         self.pin.is_set_high()
     }
 
     /// Is the output pin set as low?
     #[inline]
-    pub fn is_set_low(&self) -> bool {
+    pub fn is_set_low(&mut self) -> bool {
         self.pin.is_set_low()
     }
 
     /// What level output is set to
     #[inline]
-    pub fn get_output_level(&self) -> Level {
+    pub fn get_output_level(&mut self) -> Level {
         self.pin.get_output_level()
     }
 
@@ -777,12 +787,12 @@ impl<'d, T: Pin> embedded_hal_02::digital::v2::InputPin for Input<'d, T> {
 
     #[inline]
     fn is_high(&self) -> Result<bool, Self::Error> {
-        Ok(self.is_high())
+        Ok(!self.pin.ref_is_low())
     }
 
     #[inline]
     fn is_low(&self) -> Result<bool, Self::Error> {
-        Ok(self.is_low())
+        Ok(self.pin.ref_is_low())
     }
 }
 
@@ -805,13 +815,13 @@ impl<'d, T: Pin> embedded_hal_02::digital::v2::OutputPin for Output<'d, T> {
 impl<'d, T: Pin> embedded_hal_02::digital::v2::StatefulOutputPin for Output<'d, T> {
     #[inline]
     fn is_set_high(&self) -> Result<bool, Self::Error> {
-        Ok(self.is_set_high())
+        Ok(!self.pin.ref_is_set_low())
     }
 
     /// Is the output pin set as low?
     #[inline]
     fn is_set_low(&self) -> Result<bool, Self::Error> {
-        Ok(self.is_set_low())
+        Ok(self.pin.ref_is_set_low())
     }
 }
 
@@ -843,13 +853,13 @@ impl<'d, T: Pin> embedded_hal_02::digital::v2::OutputPin for OutputOpenDrain<'d,
 impl<'d, T: Pin> embedded_hal_02::digital::v2::StatefulOutputPin for OutputOpenDrain<'d, T> {
     #[inline]
     fn is_set_high(&self) -> Result<bool, Self::Error> {
-        Ok(self.is_set_high())
+        Ok(!self.pin.ref_is_set_low())
     }
 
     /// Is the output pin set as low?
     #[inline]
     fn is_set_low(&self) -> Result<bool, Self::Error> {
-        Ok(self.is_set_low())
+        Ok(self.pin.ref_is_set_low())
     }
 }
 
@@ -867,12 +877,12 @@ impl<'d, T: Pin> embedded_hal_02::digital::v2::InputPin for Flex<'d, T> {
 
     #[inline]
     fn is_high(&self) -> Result<bool, Self::Error> {
-        Ok(self.is_high())
+        Ok(!self.ref_is_low())
     }
 
     #[inline]
     fn is_low(&self) -> Result<bool, Self::Error> {
-        Ok(self.is_low())
+        Ok(self.ref_is_low())
     }
 }
 
@@ -895,13 +905,13 @@ impl<'d, T: Pin> embedded_hal_02::digital::v2::OutputPin for Flex<'d, T> {
 impl<'d, T: Pin> embedded_hal_02::digital::v2::StatefulOutputPin for Flex<'d, T> {
     #[inline]
     fn is_set_high(&self) -> Result<bool, Self::Error> {
-        Ok(self.is_set_high())
+        Ok(!self.ref_is_set_low())
     }
 
     /// Is the output pin set as low?
     #[inline]
     fn is_set_low(&self) -> Result<bool, Self::Error> {
-        Ok(self.is_set_low())
+        Ok(self.ref_is_set_low())
     }
 }
 
@@ -920,12 +930,12 @@ impl<'d, T: Pin> embedded_hal_1::digital::ErrorType for Input<'d, T> {
 
 impl<'d, T: Pin> embedded_hal_1::digital::InputPin for Input<'d, T> {
     #[inline]
-    fn is_high(&self) -> Result<bool, Self::Error> {
+    fn is_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_high())
     }
 
     #[inline]
-    fn is_low(&self) -> Result<bool, Self::Error> {
+    fn is_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_low())
     }
 }
@@ -948,13 +958,13 @@ impl<'d, T: Pin> embedded_hal_1::digital::OutputPin for Output<'d, T> {
 
 impl<'d, T: Pin> embedded_hal_1::digital::StatefulOutputPin for Output<'d, T> {
     #[inline]
-    fn is_set_high(&self) -> Result<bool, Self::Error> {
+    fn is_set_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_high())
     }
 
     /// Is the output pin set as low?
     #[inline]
-    fn is_set_low(&self) -> Result<bool, Self::Error> {
+    fn is_set_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_low())
     }
 }
@@ -972,12 +982,12 @@ impl<'d, T: Pin> embedded_hal_1::digital::ErrorType for OutputOpenDrain<'d, T> {
 
 impl<'d, T: Pin> embedded_hal_1::digital::InputPin for OutputOpenDrain<'d, T> {
     #[inline]
-    fn is_high(&self) -> Result<bool, Self::Error> {
+    fn is_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_high())
     }
 
     #[inline]
-    fn is_low(&self) -> Result<bool, Self::Error> {
+    fn is_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_low())
     }
 }
@@ -996,13 +1006,13 @@ impl<'d, T: Pin> embedded_hal_1::digital::OutputPin for OutputOpenDrain<'d, T> {
 
 impl<'d, T: Pin> embedded_hal_1::digital::StatefulOutputPin for OutputOpenDrain<'d, T> {
     #[inline]
-    fn is_set_high(&self) -> Result<bool, Self::Error> {
+    fn is_set_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_high())
     }
 
     /// Is the output pin set as low?
     #[inline]
-    fn is_set_low(&self) -> Result<bool, Self::Error> {
+    fn is_set_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_low())
     }
 }
@@ -1016,12 +1026,12 @@ impl<'d, T: Pin> embedded_hal_1::digital::ToggleableOutputPin for OutputOpenDrai
 
 impl<'d, T: Pin> embedded_hal_1::digital::InputPin for Flex<'d, T> {
     #[inline]
-    fn is_high(&self) -> Result<bool, Self::Error> {
+    fn is_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_high())
     }
 
     #[inline]
-    fn is_low(&self) -> Result<bool, Self::Error> {
+    fn is_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_low())
     }
 }
@@ -1051,13 +1061,13 @@ impl<'d, T: Pin> embedded_hal_1::digital::ErrorType for Flex<'d, T> {
 
 impl<'d, T: Pin> embedded_hal_1::digital::StatefulOutputPin for Flex<'d, T> {
     #[inline]
-    fn is_set_high(&self) -> Result<bool, Self::Error> {
+    fn is_set_high(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_high())
     }
 
     /// Is the output pin set as low?
     #[inline]
-    fn is_set_low(&self) -> Result<bool, Self::Error> {
+    fn is_set_low(&mut self) -> Result<bool, Self::Error> {
         Ok(self.is_set_low())
     }
 }

embassy-stm32/src/time_driver.rs

@@ -43,7 +43,10 @@ type T = peripherals::TIM3;
 type T = peripherals::TIM4;
 #[cfg(time_driver_tim5)]
 type T = peripherals::TIM5;
-
+#[cfg(time_driver_tim9)]
+type T = peripherals::TIM9;
+#[cfg(time_driver_tim11)]
+type T = peripherals::TIM11;
 #[cfg(time_driver_tim12)]
 type T = peripherals::TIM12;
 #[cfg(time_driver_tim15)]
@@ -82,6 +85,22 @@ foreach_interrupt! {
             DRIVER.on_interrupt()
         }
     };
+    (TIM9, timer, $block:ident, UP, $irq:ident) => {
+        #[cfg(time_driver_tim9)]
+        #[cfg(feature = "rt")]
+        #[interrupt]
+        fn $irq() {
+            DRIVER.on_interrupt()
+        }
+    };
+    (TIM11, timer, $block:ident, UP, $irq:ident) => {
+        #[cfg(time_driver_tim11)]
+        #[cfg(feature = "rt")]
+        #[interrupt]
+        fn $irq() {
+            DRIVER.on_interrupt()
+        }
+    };
     (TIM12, timer, $block:ident, UP, $irq:ident) => {
         #[cfg(time_driver_tim12)]
         #[cfg(feature = "rt")]

embassy-stm32/src/usart/mod.rs

@@ -132,6 +132,14 @@ pub struct Config {
     /// Set this to true to swap the RX and TX pins.
     #[cfg(any(usart_v3, usart_v4))]
     pub swap_rx_tx: bool,
+
+    /// Set this to true to invert TX pin signal values (V<sub>DD</sub> =0/mark, Gnd = 1/idle).
+    #[cfg(any(usart_v3, usart_v4))]
+    pub invert_tx: bool,
+
+    /// Set this to true to invert RX pin signal values (V<sub>DD</sub> =0/mark, Gnd = 1/idle).
+    #[cfg(any(usart_v3, usart_v4))]
+    pub invert_rx: bool,
 }
 
 impl Default for Config {
@@ -147,6 +155,10 @@ impl Default for Config {
             assume_noise_free: false,
             #[cfg(any(usart_v3, usart_v4))]
             swap_rx_tx: false,
+            #[cfg(any(usart_v3, usart_v4))]
+            invert_tx: false,
+            #[cfg(any(usart_v3, usart_v4))]
+            invert_rx: false,
         }
     }
 }
@@ -972,7 +984,11 @@ fn configure(
         });
 
         #[cfg(any(usart_v3, usart_v4))]
-        w.set_swap(config.swap_rx_tx);
+        {
+            w.set_txinv(config.invert_tx);
+            w.set_rxinv(config.invert_rx);
+            w.set_swap(config.swap_rx_tx);
+        }
     });
 
     #[cfg(not(usart_v1))]

embassy-stm32/src/usb/usb.rs

@@ -263,7 +263,7 @@ impl<'d, T: Instance> Driver<'d, T> {
 
         let regs = T::regs();
 
-        #[cfg(stm32l5)]
+        #[cfg(any(stm32l5, stm32wb))]
         crate::pac::PWR.cr2().modify(|w| w.set_usv(true));
 
         #[cfg(pwr_h5)]

embassy-time/CHANGELOG.md

@@ -24,8 +24,8 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## 0.1.3 - 2023-08-28
 
-- Update `embedded-hal-async` to `1.0.0-rc.2`
-- Update `embedded-hal v1` to `1.0.0-rc.2`
+- Update `embedded-hal-async` to `1.0.0-rc.3`
+- Update `embedded-hal v1` to `1.0.0-rc.3`
 
 ## 0.1.2 - 2023-07-05
 

embassy-time/Cargo.toml

@@ -235,8 +235,8 @@ defmt = { version = "0.3", optional = true }
 log = { version = "0.4.14", optional = true }
 
 embedded-hal-02 = { package = "embedded-hal", version = "0.2.6" }
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
-embedded-hal-async = { version = "=1.0.0-rc.2" }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.3" }
+embedded-hal-async = { version = "=1.0.0-rc.3" }
 
 futures-util = { version = "0.3.17", default-features = false }
 critical-section = "1.1"

examples/nrf52840/Cargo.toml

@@ -36,9 +36,9 @@ rand = { version = "0.8.4", default-features = false }
 embedded-storage = "0.3.1"
 usbd-hid = "0.6.0"
 serde = { version = "1.0.136", default-features = false }
-embedded-hal = { version = "1.0.0-rc.2" }
-embedded-hal-async = { version = "1.0.0-rc.2" }
-embedded-hal-bus = { version = "0.1.0-rc.2", features = ["async"] }
+embedded-hal = { version = "1.0.0-rc.3" }
+embedded-hal-async = { version = "1.0.0-rc.3" }
+embedded-hal-bus = { version = "0.1.0-rc.3", features = ["async"] }
 num-integer = { version = "0.1.45", default-features = false }
 microfft = "0.5.0"
 

examples/rp/Cargo.toml

@@ -38,9 +38,9 @@ smart-leds = "0.3.0"
 heapless = "0.8"
 usbd-hid = "0.6.1"
 
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
-embedded-hal-async = "1.0.0-rc.2"
-embedded-hal-bus = { version = "0.1.0-rc.2", features = ["async"] }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.3" }
+embedded-hal-async = "1.0.0-rc.3"
+embedded-hal-bus = { version = "0.1.0-rc.3", features = ["async"] }
 embedded-io-async = { version = "0.6.1", features = ["defmt-03"] }
 embedded-storage = { version = "0.3" }
 static_cell = { version = "2", features = ["nightly"]}

examples/rp/src/bin/button.rs

@@ -17,7 +17,7 @@ async fn main(_spawner: Spawner) {
 
     // Use PIN_28, Pin34 on J0 for RP Pico, as a input.
     // You need to add your own button.
-    let button = Input::new(p.PIN_28, Pull::Up);
+    let mut button = Input::new(p.PIN_28, Pull::Up);
 
     loop {
         if button.is_high() {

examples/stm32c0/src/bin/button.rs

@@ -13,7 +13,7 @@ fn main() -> ! {
 
     let p = embassy_stm32::init(Default::default());
 
-    let button = Input::new(p.PC13, Pull::Up);
+    let mut button = Input::new(p.PC13, Pull::Up);
 
     loop {
         if button.is_high() {

examples/stm32f1/src/bin/can.rs

@@ -0,0 +1,67 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::can::bxcan::filter::Mask32;
+use embassy_stm32::can::bxcan::{Fifo, Frame, Id, StandardId};
+use embassy_stm32::can::{Can, Rx0InterruptHandler, Rx1InterruptHandler, SceInterruptHandler, TxInterruptHandler};
+use embassy_stm32::peripherals::CAN;
+use embassy_stm32::{bind_interrupts, Config};
+use {defmt_rtt as _, panic_probe as _};
+
+bind_interrupts!(struct Irqs {
+    USB_LP_CAN1_RX0 => Rx0InterruptHandler<CAN>;
+    CAN1_RX1 => Rx1InterruptHandler<CAN>;
+    CAN1_SCE => SceInterruptHandler<CAN>;
+    USB_HP_CAN1_TX => TxInterruptHandler<CAN>;
+});
+
+// This example is configured to work with real CAN transceivers on B8/B9.
+// See other examples for loopback.
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_stm32::init(Config::default());
+
+    // Set alternate pin mapping to B8/B9
+    embassy_stm32::pac::AFIO.mapr().modify(|w| w.set_can1_remap(2));
+
+    let mut can = Can::new(p.CAN, p.PB8, p.PB9, Irqs);
+
+    can.as_mut()
+        .modify_filters()
+        .enable_bank(0, Fifo::Fifo0, Mask32::accept_all());
+
+    can.as_mut()
+        .modify_config()
+        .set_loopback(false)
+        .set_silent(false)
+        .leave_disabled();
+
+    can.set_bitrate(250_000);
+
+    can.enable().await;
+
+    let mut i: u8 = 0;
+    loop {
+        let tx_frame = Frame::new_data(unwrap!(StandardId::new(i as _)), [i]);
+        can.write(&tx_frame).await;
+
+        match can.read().await {
+            Ok(env) => match env.frame.id() {
+                Id::Extended(id) => {
+                    defmt::println!("Extended Frame id={:x}", id.as_raw());
+                }
+                Id::Standard(id) => {
+                    defmt::println!("Standard Frame id={:x}", id.as_raw());
+                }
+            },
+            Err(err) => {
+                defmt::println!("Error {}", err);
+            }
+        }
+        i += 1;
+    }
+}

examples/stm32f3/src/bin/button.rs

@@ -13,7 +13,7 @@ fn main() -> ! {
 
     let p = embassy_stm32::init(Default::default());
 
-    let button = Input::new(p.PA0, Pull::Down);
+    let mut button = Input::new(p.PA0, Pull::Down);
     let mut led1 = Output::new(p.PE9, Level::High, Speed::Low);
     let mut led2 = Output::new(p.PE15, Level::High, Speed::Low);
 

examples/stm32f4/src/bin/button.rs

@@ -13,7 +13,7 @@ fn main() -> ! {
 
     let p = embassy_stm32::init(Default::default());
 
-    let button = Input::new(p.PC13, Pull::Down);
+    let mut button = Input::new(p.PC13, Pull::Down);
     let mut led1 = Output::new(p.PB0, Level::High, Speed::Low);
     let _led2 = Output::new(p.PB7, Level::High, Speed::Low);
     let mut led3 = Output::new(p.PB14, Level::High, Speed::Low);

examples/stm32f7/src/bin/button.rs

@@ -13,7 +13,7 @@ fn main() -> ! {
 
     let p = embassy_stm32::init(Default::default());
 
-    let button = Input::new(p.PC13, Pull::Down);
+    let mut button = Input::new(p.PC13, Pull::Down);
     let mut led1 = Output::new(p.PB0, Level::High, Speed::Low);
     let _led2 = Output::new(p.PB7, Level::High, Speed::Low);
     let mut led3 = Output::new(p.PB14, Level::High, Speed::Low);

examples/stm32g0/src/bin/button.rs

@@ -13,7 +13,7 @@ fn main() -> ! {
 
     let p = embassy_stm32::init(Default::default());
 
-    let button = Input::new(p.PC13, Pull::Up);
+    let mut button = Input::new(p.PC13, Pull::Up);
 
     loop {
         if button.is_high() {

examples/stm32g4/src/bin/button.rs

@@ -13,7 +13,7 @@ fn main() -> ! {
 
     let p = embassy_stm32::init(Default::default());
 
-    let button = Input::new(p.PC13, Pull::Down);
+    let mut button = Input::new(p.PC13, Pull::Down);
 
     loop {
         if button.is_high() {

examples/stm32h5/Cargo.toml

@@ -19,8 +19,8 @@ defmt-rtt = "0.4"
 cortex-m = { version = "0.7.6", features = ["inline-asm", "critical-section-single-core"] }
 cortex-m-rt = "0.7.0"
 embedded-hal = "0.2.6"
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
-embedded-hal-async = { version = "=1.0.0-rc.2" }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.3" }
+embedded-hal-async = { version = "=1.0.0-rc.3" }
 embedded-io-async = { version = "0.6.1" }
 embedded-nal-async = { version = "0.7.1" }
 panic-probe = { version = "0.3", features = ["print-defmt"] }

examples/stm32h7/Cargo.toml

@@ -19,8 +19,8 @@ defmt-rtt = "0.4"
 cortex-m = { version = "0.7.6", features = ["inline-asm", "critical-section-single-core"] }
 cortex-m-rt = "0.7.0"
 embedded-hal = "0.2.6"
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
-embedded-hal-async = { version = "=1.0.0-rc.2" }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.3" }
+embedded-hal-async = { version = "=1.0.0-rc.3" }
 embedded-nal-async = { version = "0.7.1" }
 embedded-io-async = { version = "0.6.1" }
 panic-probe = { version = "0.3", features = ["print-defmt"] }

examples/stm32l0/src/bin/button.rs

@@ -12,7 +12,7 @@ async fn main(_spawner: Spawner) {
     let p = embassy_stm32::init(Default::default());
     info!("Hello World!");
 
-    let button = Input::new(p.PB2, Pull::Up);
+    let mut button = Input::new(p.PB2, Pull::Up);
     let mut led1 = Output::new(p.PA5, Level::High, Speed::Low);
     let mut led2 = Output::new(p.PB5, Level::High, Speed::Low);
 

examples/stm32l4/Cargo.toml

@@ -24,9 +24,9 @@ defmt-rtt = "0.4"
 cortex-m = { version = "0.7.6", features = ["critical-section-single-core"] }
 cortex-m-rt = "0.7.0"
 embedded-hal = "0.2.6"
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
-embedded-hal-async = { version = "=1.0.0-rc.2" }
-embedded-hal-bus = { version = "=0.1.0-rc.2", features = ["async"] }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.3" }
+embedded-hal-async = { version = "=1.0.0-rc.3" }
+embedded-hal-bus = { version = "=0.1.0-rc.3", features = ["async"] }
 panic-probe = { version = "0.3", features = ["print-defmt"] }
 futures = { version = "0.3.17", default-features = false, features = ["async-await"] }
 heapless = { version = "0.8", default-features = false }

examples/stm32l4/src/bin/button.rs

@@ -12,7 +12,7 @@ fn main() -> ! {
 
     let p = embassy_stm32::init(Default::default());
 
-    let button = Input::new(p.PC13, Pull::Up);
+    let mut button = Input::new(p.PC13, Pull::Up);
 
     loop {
         if button.is_high() {

examples/stm32l4/src/bin/spe_adin1110_http_server.rs

@@ -114,8 +114,8 @@ async fn main(spawner: Spawner) {
     let led_uc4_blue = Output::new(dp.PG15, Level::High, Speed::Low);
 
     // Read the uc_cfg switches
-    let uc_cfg0 = Input::new(dp.PB2, Pull::None);
-    let uc_cfg1 = Input::new(dp.PF11, Pull::None);
+    let mut uc_cfg0 = Input::new(dp.PB2, Pull::None);
+    let mut uc_cfg1 = Input::new(dp.PF11, Pull::None);
     let _uc_cfg2 = Input::new(dp.PG6, Pull::None);
     let _uc_cfg3 = Input::new(dp.PG11, Pull::None);
 
@@ -133,8 +133,8 @@ async fn main(spawner: Spawner) {
 
     // Setup IO and SPI for the SPE chip
     let spe_reset_n = Output::new(dp.PC7, Level::Low, Speed::Low);
-    let spe_cfg0 = Input::new(dp.PC8, Pull::None);
-    let spe_cfg1 = Input::new(dp.PC9, Pull::None);
+    let mut spe_cfg0 = Input::new(dp.PC8, Pull::None);
+    let mut spe_cfg1 = Input::new(dp.PC9, Pull::None);
     let _spe_ts_capt = Output::new(dp.PC6, Level::Low, Speed::Low);
 
     let spe_int = Input::new(dp.PB11, Pull::None);

examples/stm32l4/src/bin/spi_blocking_async.rs

@@ -30,7 +30,7 @@ async fn main(_spawner: Spawner) {
     let _wake = Output::new(p.PB13, Level::Low, Speed::VeryHigh);
     let mut reset = Output::new(p.PE8, Level::Low, Speed::VeryHigh);
     let mut cs = Output::new(p.PE0, Level::High, Speed::VeryHigh);
-    let ready = Input::new(p.PE1, Pull::Up);
+    let mut ready = Input::new(p.PE1, Pull::Up);
 
     cortex_m::asm::delay(100_000);
     reset.set_high();

examples/stm32l4/src/bin/spi_dma.rs

@@ -25,7 +25,7 @@ async fn main(_spawner: Spawner) {
     let _wake = Output::new(p.PB13, Level::Low, Speed::VeryHigh);
     let mut reset = Output::new(p.PE8, Level::Low, Speed::VeryHigh);
     let mut cs = Output::new(p.PE0, Level::High, Speed::VeryHigh);
-    let ready = Input::new(p.PE1, Pull::Up);
+    let mut ready = Input::new(p.PE1, Pull::Up);
 
     cortex_m::asm::delay(100_000);
     reset.set_high();

examples/stm32wl/src/bin/button.rs

@@ -13,7 +13,7 @@ fn main() -> ! {
 
     let p = embassy_stm32::init(Default::default());
 
-    let button = Input::new(p.PA0, Pull::Up);
+    let mut button = Input::new(p.PA0, Pull::Up);
     let mut led1 = Output::new(p.PB15, Level::High, Speed::Low);
     let mut led2 = Output::new(p.PB9, Level::High, Speed::Low);
 

tests/nrf/Cargo.toml

@@ -16,8 +16,8 @@ embedded-io-async = { version = "0.6.1", features = ["defmt-03"] }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "tcp", "dhcpv4", "medium-ethernet", ] }
 embassy-net-esp-hosted = { version = "0.1.0", path = "../../embassy-net-esp-hosted", features = ["defmt"] }
 embassy-net-enc28j60 = { version = "0.1.0", path = "../../embassy-net-enc28j60", features = ["defmt"] }
-embedded-hal-async = { version = "1.0.0-rc.2" }
-embedded-hal-bus = { version = "0.1.0-rc.2", features = ["async"] }
+embedded-hal-async = { version = "1.0.0-rc.3" }
+embedded-hal-bus = { version = "0.1.0-rc.3", features = ["async"] }
 static_cell = { version = "2", features = [ "nightly" ] }
 perf-client = { path = "../perf-client" }
 

tests/rp/Cargo.toml

@@ -24,9 +24,9 @@ defmt-rtt = "0.4"
 cortex-m = { version = "0.7.6" }
 cortex-m-rt = "0.7.0"
 embedded-hal = "0.2.6"
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
-embedded-hal-async = { version = "=1.0.0-rc.2" }
-embedded-hal-bus = { version = "=0.1.0-rc.2", features = ["async"] }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.3" }
+embedded-hal-async = { version = "=1.0.0-rc.3" }
+embedded-hal-bus = { version = "=0.1.0-rc.3", features = ["async"] }
 panic-probe = { version = "0.3.0", features = ["print-defmt"] }
 futures = { version = "0.3.17", default-features = false, features = ["async-await"] }
 embedded-io-async = { version = "0.6.1" }

tests/rp/src/bin/gpio.rs

@@ -16,10 +16,10 @@ async fn main(_spawner: Spawner) {
 
     // Test initial output
     {
-        let b = Input::new(&mut b, Pull::None);
+        let mut b = Input::new(&mut b, Pull::None);
 
         {
-            let a = Output::new(&mut a, Level::Low);
+            let mut a = Output::new(&mut a, Level::Low);
             delay();
             assert!(b.is_low());
             assert!(!b.is_high());
@@ -64,7 +64,7 @@ async fn main(_spawner: Spawner) {
 
     // Test input no pull
     {
-        let b = Input::new(&mut b, Pull::None);
+        let mut b = Input::new(&mut b, Pull::None);
         // no pull, the status is undefined
 
         let mut a = Output::new(&mut a, Level::Low);
@@ -77,7 +77,7 @@ async fn main(_spawner: Spawner) {
 
     // Test input pulldown
     {
-        let b = Input::new(&mut b, Pull::Down);
+        let mut b = Input::new(&mut b, Pull::Down);
         delay();
         assert!(b.is_low());
 
@@ -91,7 +91,7 @@ async fn main(_spawner: Spawner) {
 
     // Test input pullup
     {
-        let b = Input::new(&mut b, Pull::Up);
+        let mut b = Input::new(&mut b, Pull::Up);
         delay();
         assert!(b.is_high());
 

tests/rp/src/bin/pwm.rs

@@ -45,7 +45,7 @@ async fn main(_spawner: Spawner) {
 
         // Test output from A
         {
-            let pin1 = Input::new(&mut p9, Pull::None);
+            let mut pin1 = Input::new(&mut p9, Pull::None);
             let _pwm = Pwm::new_output_a(&mut p.PWM_CH3, &mut p6, cfg.clone());
             Timer::after_millis(1).await;
             assert_eq!(pin1.is_low(), invert_a);
@@ -59,7 +59,7 @@ async fn main(_spawner: Spawner) {
 
         // Test output from B
         {
-            let pin2 = Input::new(&mut p11, Pull::None);
+            let mut pin2 = Input::new(&mut p11, Pull::None);
             let _pwm = Pwm::new_output_b(&mut p.PWM_CH3, &mut p7, cfg.clone());
             Timer::after_millis(1).await;
             assert_ne!(pin2.is_low(), invert_a);
@@ -73,8 +73,8 @@ async fn main(_spawner: Spawner) {
 
         // Test output from A+B
         {
-            let pin1 = Input::new(&mut p9, Pull::None);
-            let pin2 = Input::new(&mut p11, Pull::None);
+            let mut pin1 = Input::new(&mut p9, Pull::None);
+            let mut pin2 = Input::new(&mut p11, Pull::None);
             let _pwm = Pwm::new_output_ab(&mut p.PWM_CH3, &mut p6, &mut p7, cfg.clone());
             Timer::after_millis(1).await;
             assert_eq!(pin1.is_low(), invert_a);

tests/stm32/Cargo.toml

@@ -63,8 +63,8 @@ defmt-rtt = "0.4"
 cortex-m = { version = "0.7.6", features = ["critical-section-single-core"] }
 cortex-m-rt = "0.7.0"
 embedded-hal = "0.2.6"
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
-embedded-hal-async = { version = "=1.0.0-rc.2" }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.3" }
+embedded-hal-async = { version = "=1.0.0-rc.3" }
 micromath = "2.0.0"
 panic-probe = { version = "0.3.0", features = ["print-defmt"] }
 rand_core = { version = "0.6", default-features = false }

tests/stm32/src/bin/gpio.rs

@@ -20,10 +20,10 @@ async fn main(_spawner: Spawner) {
 
     // Test initial output
     {
-        let b = Input::new(&mut b, Pull::None);
+        let mut b = Input::new(&mut b, Pull::None);
 
         {
-            let a = Output::new(&mut a, Level::Low, Speed::Low);
+            let mut a = Output::new(&mut a, Level::Low, Speed::Low);
             delay();
             assert!(b.is_low());
             assert!(!b.is_high());
@@ -68,7 +68,7 @@ async fn main(_spawner: Spawner) {
 
     // Test input no pull
     {
-        let b = Input::new(&mut b, Pull::None);
+        let mut b = Input::new(&mut b, Pull::None);
         // no pull, the status is undefined
 
         let mut a = Output::new(&mut a, Level::Low, Speed::Low);
@@ -81,7 +81,7 @@ async fn main(_spawner: Spawner) {
 
     // Test input pulldown
     {
-        let b = Input::new(&mut b, Pull::Down);
+        let mut b = Input::new(&mut b, Pull::Down);
         delay();
         assert!(b.is_low());
 
@@ -95,7 +95,7 @@ async fn main(_spawner: Spawner) {
 
     // Test input pullup
     {
-        let b = Input::new(&mut b, Pull::Up);
+        let mut b = Input::new(&mut b, Pull::Up);
         delay();
         assert!(b.is_high());
 
@@ -109,7 +109,7 @@ async fn main(_spawner: Spawner) {
 
     // Test output open drain
     {
-        let b = Input::new(&mut b, Pull::Down);
+        let mut b = Input::new(&mut b, Pull::Down);
         // no pull, the status is undefined
 
         let mut a = OutputOpenDrain::new(&mut a, Level::Low, Speed::Low, Pull::None);