cyw43

WIP driver for the CYW43439 wifi chip, used in the Raspberry Pi Pico W. Implementation based on Infineon/wifi-host-driver.

Current status

Working:

Station mode (joining an AP).
AP mode (creating an AP)
Scanning
Sending and receiving Ethernet frames.
Using the default MAC address.
embassy-net integration.
RP2040 PIO driver for the nonstandard half-duplex SPI used in the Pico W.
Using IRQ for device events
GPIO support (for LED on the Pico W)

TODO:

Setting a custom MAC address.
Bus sleep (unclear what the benefit is. Is it needed for IRQs? or is it just power consumption optimization?)

Running the examples

cargo install probe-rs-cli
cd examples/rpi-pico-w

Example 1: Scan the wifi stations

cargo run --release --bin wifi_scan

Example 2: Create an access point (IP and credentials in the code)

cargo run --release --bin tcp_server_ap

Example 3: Connect to an existing network and create a server

WIFI_NETWORK=MyWifiNetwork WIFI_PASSWORD=MyWifiPassword cargo run --release

After a few seconds, you should see that DHCP picks up an IP address like this

11.944489 DEBUG Acquired IP configuration:
11.944517 DEBUG    IP address:      192.168.0.250/24
11.944620 DEBUG    Default gateway: 192.168.0.33
11.944722 DEBUG    DNS server 0:    192.168.0.33

This example implements a TCP echo server on port 1234. You can try connecting to it with:

nc 192.168.0.250 1234

Send it some data, you should see it echoed back and printed in the firmware's logs.

License

This work is licensed under either of

Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)

at your option.

1.8 KiB Raw Blame History