1.7 KiB
1.7 KiB
cyw43
WIP driver for the CYW43439 wifi chip, used in the Raspberry Pi Pico W. Implementation based on Infineon/wifi-host-driver.
Current status
Working:
- Station mode (joining an AP).
- Sending and receiving Ethernet frames.
- Using the default MAC address.
embassy-netintegration.
TODO:
- AP mode (creating an AP)
- GPIO support (used for the Pico W LED)
- Scanning
- Setting a custom MAC address.
- RP2040 PIO driver for the nonstandard half-duplex SPI used in the Pico W. Probably porting this. (Currently bitbanging is used).
- Using the IRQ pin instead of polling the bus.
- Bus sleep (unclear what the benefit is. Is it needed for IRQs? or is it just power consumption optimization?)
Running the example
cargo install probe-runcd examples/rpi-pico-wWIFI_NETWORK=MyWifiNetwork WIFI_PASSWORD=MyWifiPassword cargo run --release
After a few seconds, you should see that DHCP picks up an IP address like this
11.944489 DEBUG Acquired IP configuration:
11.944517 DEBUG IP address: 192.168.0.250/24
11.944620 DEBUG Default gateway: 192.168.0.33
11.944722 DEBUG DNS server 0: 192.168.0.33
The example implements a TCP echo server on port 1234. You can try connecting to it with:
nc 192.168.0.250 1234
Send it some data, you should see it echoed back and printed in the firmware's logs.
License
This work is licensed under either of
- Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.