Commit Graph

110 Commits

Author SHA1 Message Date
Dario Nieuwenhuis
1e69a8c484 stm32: move pin trait impls from macrotables to build.rs 2022-02-23 19:54:46 +01:00
Dario Nieuwenhuis
2abb04d4d1 stm32/rcc: fix f3 build failure. 2022-02-23 03:42:46 +01:00
Dario Nieuwenhuis
39d06b59cd Update stm32-data 2022-02-14 02:12:06 +01:00
Dario Nieuwenhuis
b99ab3d5d9 stm32: Add standard crate-wide macros for pin/dma traits, switch all drivers to use them. 2022-02-10 21:38:03 +01:00
Dario Nieuwenhuis
8160af6af9 stm32: replace peripheral_rcc! macrotable with build.rs 2022-02-09 00:58:17 +01:00
Matous Hybl
fee1de109d Fix RCC configuration for H7. 2022-02-08 14:36:53 +01:00
Greg V
8bb41a3281 stm32f3: fix nonexistent cfg tests
The rcc code was taken from stm32-rs which uses 'x' features, but
embassy uses features with full chip names.

Add these 'x' wildcards as cfgs and use them in rcc.
They will be useful for USB too.
2022-02-02 22:53:03 +03:00
Dario Nieuwenhuis
a8580ec78a stm32/rcc: fix stm32f410 2022-01-24 00:50:35 +01:00
Greg V
9fcc207629 stm32l1/rcc: fix clock frequency assertion
It was comparing a number in Hz (!) to "32" (MHz).
embassy-stm32's units don't work like those used by stm32-hal :/
2022-01-14 22:59:57 +03:00
Greg V
456b56d4fd stm32l1/rcc: set required flash bits for high frequencies
As is done for lots of other families
2022-01-14 22:59:57 +03:00
Matous Hybl
e07df92651 Make RCC accessible using low-level API. 2022-01-13 16:12:45 +01:00
Dario Nieuwenhuis
2eb0cc5df7 stm32/rcc: remove Rcc struct, RccExt trait.
All the RCC configuration is executed in init().
2022-01-05 00:00:44 +01:00
Dario Nieuwenhuis
c3fd9a0f44 stm32/rcc: f4/f7 cleanup and make a bit more consistent. 2022-01-04 21:17:17 +01:00
Dario Nieuwenhuis
b06e705a73 stm32/rcc: change family-specific code from dirs to single files.
Consistent with how other peripherals handle their versions.
2022-01-04 19:28:15 +01:00
Dario Nieuwenhuis
89b009b11d stm32h7/rcc: remove unneeded DMA enable settings.
These are automatically enabled by dma::init().
2022-01-04 13:31:30 +01:00
Dario Nieuwenhuis
5d2f40b337 stm32wl/rcc: remove unneded gpio enables in RCC.
These are already done by gpio::init().
2022-01-04 13:31:30 +01:00
Dario Nieuwenhuis
cdc66e110f stm32/rcc: remove builders on Config.
This makes API consistent with other Config structs in Embassy, where
the convention is to not use builders.
2022-01-04 13:31:30 +01:00
Sjoerd Simons
a93b1141e9 stm32f1: Store adc clock rate in Clocks struct 2021-12-30 10:50:28 +01:00
bors[bot]
d5a3064c2c
Merge #540
540: Initial support for STM32F3 r=Dirbaio a=VasanthakumarV

The [companion PR](https://github.com/embassy-rs/stm32-data/pull/109) in `stm32-data` should be merged before this PR.
The examples were tested on an STM32F303VC MCU.

Co-authored-by: VasanthakumarV <vasanth260m12@gmail.com>
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
2021-12-16 07:30:03 +00:00
VasanthakumarV
3f33d307ff [feature] Add rcc register support for F3 2021-12-13 14:50:13 +05:30
Matous Hybl
1dd5a71c07 Add DCMI peripheral support. 2021-12-09 12:56:39 +01:00
Dario Nieuwenhuis
b0fabfab5d Update stm32-data: rcc regs info comes from yamls now. 2021-11-29 02:28:02 +01:00
Ulf Lilleengen
25b49a8a2a Remove common clock types
Different STM32 RCC peripherals have different capabilities and register
values. Define types for each RCC types inside each module to ensure
full range of capabilities for each family can be used
2021-11-28 16:46:08 +01:00
Dario Nieuwenhuis
88d4b0c00d stm32: add stm32g4 support. 2021-11-27 02:34:23 +01:00
bors[bot]
8193885cb5
Merge #482
482: Add MCO peripheral. r=Dirbaio a=matoushybl

This PR adds an abstraction over STM32 RCC feature called MCO (Microcontroller Clock Output). The clock output can bind to several clock sources and then can be scaled using a prescaler.

Given that from the embassy ecosystem the RCC is generaly invisible to the user, the MCO was implemented as a separate peripheral bound to the pin where the clock should appear.

Co-authored-by: Matous Hybl <hyblmatous@gmail.com>
2021-11-11 16:20:02 +00:00
Matous Hybl
c14642cffc Add MCO peripheral. 2021-11-11 11:34:09 +01:00
Bob McWhirter
12a64b867b More support for U5 PWR (ish), RCC, and FLASH (ish). 2021-11-08 14:27:33 -05:00
Bob McWhirter
5f124ec49f Update U5 to init RCC. 2021-11-08 14:20:51 -05:00
Bob McWhirter
d1272e00bb Prefix unused variable for now. 2021-11-02 15:45:56 -04:00
Bob McWhirter
f12b70535b Adjust for STM32U5. 2021-11-02 12:05:24 -04:00
Matous Hybl
015cad84dd Initial support for STM32F767ZI. 2021-10-26 17:33:28 +02:00
Ulf Lilleengen
e55726964d Fix clock setup for MSI and PLL to allow RNG opereation
Add RNG example using PLL as clock source.
2021-10-26 13:45:53 +02:00
Ben Gamari
573e6ec373 stm32g0: Add support for low-power run 2021-09-28 21:19:10 -04:00
Ben Gamari
794798e225 stm32g0: Add support for HSI divider 2021-09-28 21:19:10 -04:00
Mariusz Ryndzionek
ce361abb1b Changing the casts (code review request) 2021-09-28 18:31:04 +02:00
Mariusz Ryndzionek
bce909ec1e Initial STM32F1 family support with two examples for STM32F103C8 (Blue Pill) 2021-09-28 18:31:04 +02:00
Vincent Stakenburg
7d6d274d55 Add MSI and PLL clock source for L4 2021-09-24 18:27:39 +02:00
Ulf Lilleengen
b6fc19182b Add pwr for L1 and update RCC to new reg block 2021-09-23 14:51:16 +02:00
Ulf Lilleengen
c79485c286 Support for STM32L1
* Add RCC
* Fix more issues with dash in chip names
* Update stm32-data version
* Add blinky and spi example
2021-09-21 14:50:23 +02:00
Ulf Lilleengen
fb697a2657 Updates 2021-09-15 12:46:20 +02:00
Ulf Lilleengen
7ad6280e65 Add HAL for SubGhz peripheral for STM32 WL series
Based on the HAL from stm32wl, the peripheral driver has been
modified to fit into embassy, using the embassy APIs, providing
operation of the radio peripheral.

The initial version does not offer any async APIs, but the example
shows how the radio IRQ can be used to perform async TX of the radio.
2021-09-02 10:39:56 +02:00
Ben Gamari
e2f71ffbbd Add support for STM32G0 2021-08-20 00:15:11 +02:00
Dario Nieuwenhuis
174c51f097 stm32/metapac: check GPIO RCC regs are always found. 2021-08-19 23:59:50 +02:00
Dario Nieuwenhuis
2c992f7010 stm32: move dbgmcu stuff to toplevel config setting, defaulting to true. 2021-08-19 23:50:19 +02:00
Dario Nieuwenhuis
9f51f9a170 stm32/wl: add stub APB3 to get it to build.
Completely untested.
2021-08-19 22:51:41 +02:00
Dario Nieuwenhuis
637fcdd316 stm32/rcc: update for new version naming 2021-08-19 22:17:45 +02:00
Ulf Lilleengen
61409e2fb6 Add example for STM32WL55 2021-08-17 16:22:47 +02:00
Ben Gamari
41aaff95f8 stm32h7: Use unwrap! 2021-08-05 22:39:59 +02:00
Ben Gamari
e44acd0d56 stm32f4: Use unwrap! where possible 2021-08-05 22:39:59 +02:00
Bob McWhirter
f4971fbb79 Further work sharing config for example and removing duplicated code. 2021-08-04 13:39:02 -04:00