SMI Ethernet PHYs all share a common base set of registers that can do
90% of all tasks. The LAN8742 driver used some vendor-specific
registers to check link negotiation status, but the need for that was
debatable, so I migrated it to a generic driver instead, anybody who
wants extra functionality can copy it and impl their own on top of it.
This makes the configuration more flexible and closer to the underlying
configuration register structure. For example, we could use HSI for the
system clock, but use HSE to output a clock with MCO.
742: Only 1 argument in embassy::main when there is no HAL r=Dirbaio a=jbeaurivage
There is a slight mistake in an error message from `[embassy::main]` macro. When there is no HAL specified, `main` should take only one argument.
Co-authored-by: Justin Beaurivage <justin@wearableavionics.com>
738: Add split method to UarteWithIdle in nrf hal r=lulf a=ZoeyR
I needed this method because I was writing a driver for the sim7000 modem. Its a line based protocol so the read until idle was very useful to me. Unfortunately unlike the primary `Uarte` struct the `UarteWithIdle` didn't have `split()`. So I added it 😄
Co-authored-by: Zoey Riordan <zoey@dos.cafe>
740: Allow using separate page sizes for state and dfu r=lulf a=lulf
* Less generics on bootloader. Keep PAGE_SIZE as a common multiple of
DFU and ACTIVE page sizes.
* Document restriction
* Add unit tests for different page sizes
Co-authored-by: Ulf Lilleengen <lulf@redhat.com>
* Less generics on bootloader. Keep PAGE_SIZE as a common multiple of
DFU and ACTIVE page sizes.
* Document restriction
* Add unit tests for different page sizes
* Add flash drivers for L0, L1, L4, WB and WL. Not tested for WB, but
should be similar to WL.
* Add embassy-boot-stm32 for bootloading on STM32.
* Add flash examples and bootloader examples
* Update stm32-data
736: executor: allow Send-spawning of tasks if their args are Send. r=Dirbaio a=Dirbaio
This allows send-spawning (spawning into an executor in another thread) tasks if their args are Send. Previously this would require the entire future to be Send.
--
When send-spawning a task, we construct the future in this thread, and effectively
"send" it to the executor thread by enqueuing it in its queue. Therefore, in theory,
send-spawning should require the future `F` to be `Send`.
The problem is this is more restrictive than needed. Once the future is executing,
it is never sent to another thread. It is only sent when spawning. It should be
enough for the task's arguments to be Send. (and in practice it's super easy to
accidentally make your futures !Send, for example by holding an `Rc` or a `&RefCell` across an `.await`.)
Luckily, an `async fn` future contains just the args when freshly constructed. So, if the
args are Send, it's OK to send a !Send future, as long as we do it before first polling it.
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
The normal `spawn()` methods can be called directly by the user, with arbitrary hand-implemented futures.
We can't enforce they're only called with `async fn` futures. Therefore, make these
require `F: Send`, and add a "private" one only for use in the macro, which can enforce it.
734: executor: Add `Spawner::for_current_executor`. r=Dirbaio a=Dirbaio
This is needed to spawn non-Send tasks in an InterruptExecutor, after the fixes in #730 .
`@matoushybl` could you check if this works for your use case?
735: stm32: add stm32u5 GPDMA, SPIv4 support, add HIL tests. r=Dirbaio a=Dirbaio
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
732: macros: simplify task macro using "TAIT laundering". r=Dirbaio a=Dirbaio
This brings the macro to the state before the nightly update #729#730, with a much cleaner workaround for the opaque type error, from https://github.com/rust-lang/rust/issues/96406
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
The initial closure is not actually called in the interrupt, so this is
illegally sending non-Send futures to the interrupt.
Remove the closure, and return a SendSpawner instead.
716: Implement giant (chunked) DMA transfers r=Dirbaio a=matoushybl
There is a breaking change in the Channel trait in the method `remaining_transfers()`, this method however hasn't been used anywhere in the codebase and the return type changed from u16 to u32, so all of the previous use cases should work.
Co-authored-by: Matous Hybl <hyblmatous@gmail.com>
717: WIP: USB CDC NCM (Ethernet over USB) r=Dirbaio a=Dirbaio
TODO:
- [x] Add support for string handling in `embassy-usb`, remove the MAC addr string hax
- [x] Harden parsing of incoming NTBs to avoid panics.
- [ ] Parse all datagrams in a NDP, not just the first. -- tricky, I've made it tell the host we support only one packet per NTB instead.
- [ ] Add support for all required control transfers. -- WONTFIX, seems no OS cares about those.
- [x] Works on Linux
- [x] Doesn't work on Android, make it work
- [x] Check if it works in Windows (Win10 has some sort of CDC NCM support afaict?) -- works on Win11, CDC-NCM not supported on Win10
- [x] Check if it works in MacOS (I don't know if it's supposed to) - WORKS
I won't add the `embassy-net` driver to `embassy-usb-ncm` for now because `embassy-net` buffer management will likely be refactored soon, so there's not much point to it.
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
Fixes a new opaque type error in the task macro.
Full error is "opaque type's hidden type cannot be another opaque type from the same scope".
This got disallwed by the lazy-TAIT PR: https://github.com/rust-lang/rust/pull/94081
Sadly there's now some weird type inference errors with pre-lazy-TAIT
nightlies, so support for those is dropped.
