591: PWM WS2812B example and flexible sequence config r=Dirbaio a=huntc
I've permitted the PWM sequences to be mutated on stopping the PWM by associating them with a new `SingleSequencer` structure. This is so that we can perform effects on the LEDs (and other use-cases, I'm sure!). The example has been updated to illustrate the use of this by flashing a WS2812B LED.
There's also a `Sequencer` structure for more sophisticated PWM interactions, along with a `pwm_double_sequence` example to illustrate.
These changes should make it possible to attain all of the nRF PWM functionality available.
Co-authored-by: huntc <huntchr@gmail.com>
This approach owns the sequence buffers which, while introducing an extra move, it eliminates the need to guard the lifetime of the sequence buffer. Given ownership, the buffer will be retained until the PWM sequence task is stopped.
Demonstrates how to set the colour of a WS2812B to blue using PWM, and the use of multiple sequences along with their own config. This required an API change.
I had introduced a small bug in my last PR where I assigned the sequence before stopping the PWM. I now stop the PWM before doing that now.
Also, corrected a math comment.
Sequences are now passed in via the start method to avoid having to stop the PWM and restart it. Sequences continue to be constrained with the same lifetime of the Pwm object itself. The pwm_sequence example has been extended to illustrate multiple sequences being passed around.
This commit allows event_endtx to be used outside of the Uarte itself. As a consequence, PPI can be used to drive tasks given the end of transmission on the Uarte. This is particularly useful for situations like RS485 where a GPIO must be set to high when transmitting then cleared when done. A non-ppi approach can cause a delay in the clearing of this GPIO as other Embassy tasks might become scheduled.
Unsafe is not required here given that all futures are required to live longer than their global peripheral instances. There are other occurrences of unsafe being used on new that should be removed. I started to do that but then went down a bit of a rabbit hole.
539: nrf: async usb r=Dirbaio a=jacobrosenthal
Frankensteined together from this old pr https://github.com/embassy-rs/embassy/pull/115 and nrf-usdb
~Doesnt currently work..~
Co-authored-by: Jacob Rosenthal <jacobrosenthal@gmail.com>
544: Introduces split on the nRF Uarte r=Dirbaio a=huntc
A new `split` method is introduced such that the Uarte tx and rx can be used from separate tasks. An MPSC is used in an example to illustrate how data may be passed between these tasks.
The approach taken within the `Uarte` struct is to split into tx and rx fields on calling `Uarte::new`. These fields are returned given a call to `Uarte::split`, but otherwise, if that call isn't made, then the API remains as it was before.
Here's a snippet from a new example introduced:
```rust
#[embassy::main]
async fn main(spawner: Spawner, p: Peripherals) {
// ...
let uart = uarte::Uarte::new(p.UARTE0, irq, p.P0_08, p.P0_06, NoPin, NoPin, config);
let (mut tx, rx) = uart.split();
// ...
// Spawn a task responsible purely for reading
unwrap!(spawner.spawn(reader(rx, s)));
// ...
// Continue reading in this main task and write
// back out the buffer we receive from the read
// task.
loop {
if let Some(buf) = r.recv().await {
info!("writing...");
unwrap!(tx.write(&buf).await);
}
}
}
#[embassy::task]
async fn reader(mut rx: UarteRx<'static, UARTE0>, s: Sender<'static, Noop, [u8; 8], 1>) {
let mut buf = [0; 8];
loop {
info!("reading...");
unwrap!(rx.read(&mut buf).await);
unwrap!(s.send(buf).await);
}
}
```
Co-authored-by: huntc <huntchr@gmail.com>
A new `split` method is introduced such that the Uarte tx and rx can be used from separate tasks. An MPSC is used to illustrate how data may be passed between these tasks.
542: nrf/gpiote: remove PortInput, move impls to Input/FlexPin. r=Dirbaio a=Dirbaio
`PortInput` is just a dumb wrapper around `Input`, it has no reason whatsoever to exist. This PR moves the `wait_for_x` functionality to `Input` directly.
It also adds it to `FlexPin` for completeness and consistency with `Input`.
(The reason `PortInput` exists is a while ago `GPIOTE` was an owned singleton that you had to initialize, so `PortInput::new()` would require it to enforce it's been initialized. This doesn't apply anymore now that GPIOTE is "global")
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
As per Tokio and others, this commit provides a `poll_flush` method on `AsyncWrite` so that a best-effort attempt at wakening once all bytes are flushed can be made.
The constructors themselves are not strictly unsafe. Interactions with DMA can be generally unsafe if a future is dropped, but that's a separate issue. It is important that we use the `unsafe` keyword diligently as it can lead to confusion otherwise.
486: Pwm ppi events r=Dirbaio a=jacobrosenthal
More PWM yak shaving. I was going to do some safe pwm ppi events stuff but I just dont think it fits this api design.. ppi is just very low level, im not sure how safe it will be in general
* first we should probably have borrows of handlers for ppi with lifetime of the peripheral? hal does eb4ba6ae42/nrf-hal-common/src/pwm.rs (L714-L716)
* in general having access to tasks can put the state in some configuration the api doesnt understand anymore. for `SequencePwm` ideally id hand you back either only seq_start0 or seq_start1 because youd only use one based on if your `Times` is even or odd.. but again we only know that with this api AFTER start has been called. I dont think were ready for typestates
SO I figured why not add the pwm ppi events but make them unsafe and commit this example since I started it.
Somewhat related drop IS removing the last duty cycle from the pin correctly, but stop DOES NOT..the only thing that sets the pin back is pin.conf() as far as I can tell, so I tried to document that better and got rid of stop for the `SimplePwm` again since that doesnt need it then. However its ackward we dont have a way to unset the pwm without setting a new sequence of 0s, or dropping the peripheral
Co-authored-by: Jacob Rosenthal <jacobrosenthal@gmail.com>
455: simple_playback api from nrf sdk r=Dirbaio a=jacobrosenthal
Port of the nrf_drv_pwm_simple_playback call from the nordic sdk that allows you to set up a sequence to play across leds with no interaction necessary using the 'shorts' registers to trigger looping sequences
Co-authored-by: Jacob Rosenthal <jacobrosenthal@gmail.com>
461: nrf: add initial nrf5340 support r=Dirbaio a=Dirbaio
Thanks to `@diondokter's` work on DPPI this was quite easy! :)
TODO:
- [ ] Add config option to enable 128mhz
- [ ] Add config option to unlock APPROTECT automatically.
- [ ] Add a way to boot net (config option or API?)
- [ ] Support WDT (there's WDT0, WDT1. Needs some refactor)
- [ ] Support NVMC
- [ ] Support TEMP
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
Moving `new_*` to the version-specific mod allows doing the correct
register writes right there in `new`, without needing abstractions
like `enable_all`/`disable_all`.
- Scary pointer math is now contained in the tasks and events
- ppi now sets the tasks and events immediately and the struct is now zero-sized
- StaticToOne is renamed to ZeroToOne
- Used DPPI tasks and events now panic when enabled twice
- Removed ConfigurableChannel and added capacity numbers to the channels
- Replaced the PPI api with a new one using the DPPI terminology (publish & subscribe)
- Updated all tasks and event registers for DPPI
The buffer will always have been filled and we never explicitly stop the task outside of this code. Thus, we can assume the number of bytes in the slice.
Implements continuous sampling for the nRF SAADC and also renames `OneShot` to `Saadc`. The one-shot behaviour is retained with the `sample` method and a new `run_sampler` method is provided for efficiently (i.e. zero copying) sampler processing. A double buffer is used for continuously sampling, which wlll be swapped once sampling has taken place.
A sample frequency is provided and will set the internal timer of the SAADC when there is just the one channel being sampled. Otherwise, PPI will be used to hook up the TIMER peripheral to drive the sampling task.
- It disturbs other stuff that uses WFE/SEV in the system. I ran into
issues with this.
- It needs the irq handler to check for RXTO/TXSTOPPED errors, which makes
it slower.
423: nRF9160 support r=Dirbaio a=diondokter
- Created a chip file with all the peripherals, interrupts and peripheral implementations.
- All peripherals now use an alias for the NS (non-secure) version of the nRF9160 version.
- Implementations of peripherals that don't exist are ignored.
- Most PPI functionality has been stubbed out because the nRF91 has the newer DPPI which is not compatible with the current API. (The channels are also set to not configurable, so they are kinda useless now, but in principle the stubs should never be called)
Co-authored-by: Dion Dokter <dion@tweedegolf.com>
One-shot mode now permits the sampling of differential pins, and the sampling of multiple pins simultaneously.
A new ChannelConfig structure has been introduced so that multiple channels can be configured individually. Further, the `sample` method now accepts a buffer into which samples are written.
Along the way, I've reset some default configuration to align with Nordic's settings in their nrfx saadc driver. Specifically, the channel gain defaults to 6 (from 4) and the time defaults to 10us (from 20us).
* Adds an executor for WASM runtimes based on wasm_bindgen.
* Add time driver based on JS time handling.
* Add example that can run in browser locally.
* Update to critical-section version that supports 'std' flag
