stm32/i2c: WIP async i2cv1

STM32 I2C: expose async API without needing "time" feature.

cyw43/src/control.rs

@@ -1,4 +1,5 @@
 use core::cmp::{max, min};
+use core::iter::zip;
 
 use embassy_net_driver_channel as ch;
 use embassy_net_driver_channel::driver::{HardwareAddress, LinkState};
@@ -16,6 +17,12 @@ pub struct Error {
     pub status: u32,
 }
 
+#[derive(Debug)]
+pub enum AddMulticastAddressError {
+    NotMulticast,
+    NoFreeSlots,
+}
+
 pub struct Control<'a> {
     state_ch: ch::StateRunner<'a>,
     events: &'a Events,
@@ -316,6 +323,54 @@ impl<'a> Control<'a> {
         self.set_iovar_u32x2("bss", 0, 1).await; // bss = BSS_UP
     }
 
+    /// Add specified address to the list of hardware addresses the device
+    /// listens on. The address must be a Group address (I/G bit set). Up
+    /// to 10 addresses are supported by the firmware. Returns the number of
+    /// address slots filled after adding, or an error.
+    pub async fn add_multicast_address(&mut self, address: [u8; 6]) -> Result<usize, AddMulticastAddressError> {
+        // The firmware seems to ignore non-multicast addresses, so let's
+        // prevent the user from adding them and wasting space.
+        if address[0] & 0x01 != 1 {
+            return Err(AddMulticastAddressError::NotMulticast);
+        }
+
+        let mut buf = [0; 64];
+        self.get_iovar("mcast_list", &mut buf).await;
+
+        let n = u32::from_le_bytes(buf[..4].try_into().unwrap()) as usize;
+        let (used, free) = buf[4..].split_at_mut(n * 6);
+
+        if used.chunks(6).any(|a| a == address) {
+            return Ok(n);
+        }
+
+        if free.len() < 6 {
+            return Err(AddMulticastAddressError::NoFreeSlots);
+        }
+
+        free[..6].copy_from_slice(&address);
+        let n = n + 1;
+        buf[..4].copy_from_slice(&(n as u32).to_le_bytes());
+
+        self.set_iovar_v::<80>("mcast_list", &buf).await;
+        Ok(n)
+    }
+
+    /// Retrieve the list of configured multicast hardware addresses.
+    pub async fn list_mulistcast_addresses(&mut self, result: &mut [[u8; 6]; 10]) -> usize {
+        let mut buf = [0; 64];
+        self.get_iovar("mcast_list", &mut buf).await;
+
+        let n = u32::from_le_bytes(buf[..4].try_into().unwrap()) as usize;
+        let used = &buf[4..][..n * 6];
+
+        for (addr, output) in zip(used.chunks(6), result.iter_mut()) {
+            output.copy_from_slice(addr)
+        }
+
+        n
+    }
+
     async fn set_iovar_u32x2(&mut self, name: &str, val1: u32, val2: u32) {
         let mut buf = [0; 8];
         buf[0..4].copy_from_slice(&val1.to_le_bytes());

cyw43/src/lib.rs

@@ -27,7 +27,7 @@ use ioctl::IoctlState;
 
 use crate::bus::Bus;
 pub use crate::bus::SpiBusCyw43;
-pub use crate::control::{Control, Error as ControlError, Scanner};
+pub use crate::control::{AddMulticastAddressError, Control, Error as ControlError, Scanner};
 pub use crate::runner::Runner;
 pub use crate::structs::BssInfo;
 

embassy-executor/CHANGELOG.md

@@ -5,6 +5,11 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+## 0.3.3 - 2023-11-15
+
+- Add `main` macro reexport for Xtensa arch.
+- Remove use of `atomic-polyfill`. The executor now has multiple implementations of its internal data structures for cases where the target supports atomics or doesn't.
+
 ## 0.3.2 - 2023-11-06
 
 - Use `atomic-polyfill` for `riscv32`

embassy-executor/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "embassy-executor"
-version = "0.3.2"
+version = "0.3.3"
 edition = "2021"
 license = "MIT OR Apache-2.0"
 description = "async/await executor designed for embedded usage"
@@ -34,7 +34,7 @@ _arch = [] # some arch was picked
 arch-std = ["_arch", "critical-section/std"]
 arch-cortex-m = ["_arch", "dep:cortex-m"]
 arch-xtensa = ["_arch"]
-arch-riscv32 = ["_arch"]
+arch-riscv32 = ["_arch", "dep:portable-atomic"]
 arch-wasm = ["_arch", "dep:wasm-bindgen", "dep:js-sys"]
 
 # Enable the thread-mode executor (using WFE/SEV in Cortex-M, WFI in other embedded archs)
@@ -59,9 +59,12 @@ rtos-trace = { version = "0.1.2", optional = true }
 
 embassy-macros = { version = "0.2.1", path = "../embassy-macros" }
 embassy-time = { version = "0.1.5", path = "../embassy-time", optional = true}
-atomic-polyfill = "1.0.1"
 critical-section = "1.1"
 
+# needed for riscv
+# remove when https://github.com/rust-lang/rust/pull/114499 is merged
+portable-atomic = { version = "1.5", optional = true }
+
 # arch-cortex-m dependencies
 cortex-m = { version = "0.7.6", optional = true }
 

embassy-executor/src/arch/cortex_m.rs

@@ -115,12 +115,12 @@ mod thread {
 pub use interrupt::*;
 #[cfg(feature = "executor-interrupt")]
 mod interrupt {
-    use core::cell::UnsafeCell;
+    use core::cell::{Cell, UnsafeCell};
     use core::mem::MaybeUninit;
 
-    use atomic_polyfill::{AtomicBool, Ordering};
     use cortex_m::interrupt::InterruptNumber;
     use cortex_m::peripheral::NVIC;
+    use critical_section::Mutex;
 
     use crate::raw;
 
@@ -146,7 +146,7 @@ mod interrupt {
     /// It is somewhat more complex to use, it's recommended to use the thread-mode
     /// [`Executor`] instead, if it works for your use case.
     pub struct InterruptExecutor {
-        started: AtomicBool,
+        started: Mutex<Cell<bool>>,
         executor: UnsafeCell<MaybeUninit<raw::Executor>>,
     }
 
@@ -158,7 +158,7 @@ mod interrupt {
         #[inline]
         pub const fn new() -> Self {
             Self {
-                started: AtomicBool::new(false),
+                started: Mutex::new(Cell::new(false)),
                 executor: UnsafeCell::new(MaybeUninit::uninit()),
             }
         }
@@ -167,7 +167,8 @@ mod interrupt {
         ///
         /// # Safety
         ///
-        /// You MUST call this from the interrupt handler, and from nowhere else.
+        /// - You MUST call this from the interrupt handler, and from nowhere else.
+        /// - You must not call this before calling `start()`.
         pub unsafe fn on_interrupt(&'static self) {
             let executor = unsafe { (&*self.executor.get()).assume_init_ref() };
             executor.poll();
@@ -196,11 +197,7 @@ mod interrupt {
         /// do it after.
         ///
         pub fn start(&'static self, irq: impl InterruptNumber) -> crate::SendSpawner {
-            if self
+            if critical_section::with(|cs| self.started.borrow(cs).replace(true)) {
-                .started
-                .compare_exchange(false, true, Ordering::Acquire, Ordering::Relaxed)
-                .is_err()
-            {
                 panic!("InterruptExecutor::start() called multiple times on the same executor.");
             }
 
@@ -222,10 +219,10 @@ mod interrupt {
         /// This returns a [`SendSpawner`] you can use to spawn tasks on this
         /// executor.
         ///
-        /// This MUST only be called on an executor that has already been spawned.
+        /// This MUST only be called on an executor that has already been started.
         /// The function will panic otherwise.
         pub fn spawner(&'static self) -> crate::SendSpawner {
-            if !self.started.load(Ordering::Acquire) {
+            if !critical_section::with(|cs| self.started.borrow(cs).get()) {
                 panic!("InterruptExecutor::spawner() called on uninitialized executor.");
             }
             let executor = unsafe { (&*self.executor.get()).assume_init_ref() };

embassy-executor/src/arch/riscv32.rs

@@ -7,9 +7,9 @@ pub use thread::*;
 mod thread {
     use core::marker::PhantomData;
 
-    use atomic_polyfill::{AtomicBool, Ordering};
     #[cfg(feature = "nightly")]
     pub use embassy_macros::main_riscv as main;
+    use portable_atomic::{AtomicBool, Ordering};
 
     use crate::{raw, Spawner};
 

embassy-executor/src/arch/xtensa.rs

@@ -8,6 +8,9 @@ mod thread {
     use core::marker::PhantomData;
     use core::sync::atomic::{AtomicBool, Ordering};
 
+    #[cfg(feature = "nightly")]
+    pub use embassy_macros::main_riscv as main;
+
     use crate::{raw, Spawner};
 
     /// global atomic used to keep track of whether there is work to do since sev() is not available on Xtensa

embassy-executor/src/raw/mod.rs

@@ -7,7 +7,15 @@
 //! Using this module requires respecting subtle safety contracts. If you can, prefer using the safe
 //! [executor wrappers](crate::Executor) and the [`embassy_executor::task`](embassy_macros::task) macro, which are fully safe.
 
+#[cfg_attr(target_has_atomic = "ptr", path = "run_queue_atomics.rs")]
+#[cfg_attr(not(target_has_atomic = "ptr"), path = "run_queue_critical_section.rs")]
 mod run_queue;
+
+#[cfg_attr(all(cortex_m, target_has_atomic = "8"), path = "state_atomics_arm.rs")]
+#[cfg_attr(all(not(cortex_m), target_has_atomic = "8"), path = "state_atomics.rs")]
+#[cfg_attr(not(target_has_atomic = "8"), path = "state_critical_section.rs")]
+mod state;
+
 #[cfg(feature = "integrated-timers")]
 mod timer_queue;
 pub(crate) mod util;
@@ -21,7 +29,6 @@ use core::pin::Pin;
 use core::ptr::NonNull;
 use core::task::{Context, Poll};
 
-use atomic_polyfill::{AtomicU32, Ordering};
 #[cfg(feature = "integrated-timers")]
 use embassy_time::driver::{self, AlarmHandle};
 #[cfg(feature = "integrated-timers")]
@@ -30,21 +37,14 @@ use embassy_time::Instant;
 use rtos_trace::trace;
 
 use self::run_queue::{RunQueue, RunQueueItem};
+use self::state::State;
 use self::util::{SyncUnsafeCell, UninitCell};
 pub use self::waker::task_from_waker;
 use super::SpawnToken;
 
-/// Task is spawned (has a future)
-pub(crate) const STATE_SPAWNED: u32 = 1 << 0;
-/// Task is in the executor run queue
-pub(crate) const STATE_RUN_QUEUED: u32 = 1 << 1;
-/// Task is in the executor timer queue
-#[cfg(feature = "integrated-timers")]
-pub(crate) const STATE_TIMER_QUEUED: u32 = 1 << 2;
-
 /// Raw task header for use in task pointers.
 pub(crate) struct TaskHeader {
-    pub(crate) state: AtomicU32,
+    pub(crate) state: State,
     pub(crate) run_queue_item: RunQueueItem,
     pub(crate) executor: SyncUnsafeCell<Option<&'static SyncExecutor>>,
     poll_fn: SyncUnsafeCell<Option<unsafe fn(TaskRef)>>,
@@ -116,7 +116,7 @@ impl<F: Future + 'static> TaskStorage<F> {
     pub const fn new() -> Self {
         Self {
             raw: TaskHeader {
-                state: AtomicU32::new(0),
+                state: State::new(),
                 run_queue_item: RunQueueItem::new(),
                 executor: SyncUnsafeCell::new(None),
                 // Note: this is lazily initialized so that a static `TaskStorage` will go in `.bss`
@@ -161,7 +161,7 @@ impl<F: Future + 'static> TaskStorage<F> {
         match future.poll(&mut cx) {
             Poll::Ready(_) => {
                 this.future.drop_in_place();
-                this.raw.state.fetch_and(!STATE_SPAWNED, Ordering::AcqRel);
+                this.raw.state.despawn();
 
                 #[cfg(feature = "integrated-timers")]
                 this.raw.expires_at.set(Instant::MAX);
@@ -193,11 +193,7 @@ impl<F: Future + 'static> AvailableTask<F> {
     ///
     /// This function returns `None` if a task has already been spawned and has not finished running.
     pub fn claim(task: &'static TaskStorage<F>) -> Option<Self> {
-        task.raw
+        task.raw.state.spawn().then(|| Self { task })
-            .state
-            .compare_exchange(0, STATE_SPAWNED | STATE_RUN_QUEUED, Ordering::AcqRel, Ordering::Acquire)
-            .ok()
-            .map(|_| Self { task })
     }
 
     fn initialize_impl<S>(self, future: impl FnOnce() -> F) -> SpawnToken<S> {
@@ -394,8 +390,7 @@ impl SyncExecutor {
                 #[cfg(feature = "integrated-timers")]
                 task.expires_at.set(Instant::MAX);
 
-                let state = task.state.fetch_and(!STATE_RUN_QUEUED, Ordering::AcqRel);
+                if !task.state.run_dequeue() {
-                if state & STATE_SPAWNED == 0 {
                     // If task is not running, ignore it. This can happen in the following scenario:
                     //   - Task gets dequeued, poll starts
                     //   - While task is being polled, it gets woken. It gets placed in the queue.
@@ -546,18 +541,7 @@ impl Executor {
 /// You can obtain a `TaskRef` from a `Waker` using [`task_from_waker`].
 pub fn wake_task(task: TaskRef) {
     let header = task.header();
-
+    if header.state.run_enqueue() {
-    let res = header.state.fetch_update(Ordering::SeqCst, Ordering::SeqCst, |state| {
-        // If already scheduled, or if not started,
-        if (state & STATE_RUN_QUEUED != 0) || (state & STATE_SPAWNED == 0) {
-            None
-        } else {
-            // Mark it as scheduled
-            Some(state | STATE_RUN_QUEUED)
-        }
-    });
-
-    if res.is_ok() {
         // We have just marked the task as scheduled, so enqueue it.
         unsafe {
             let executor = header.executor.get().unwrap_unchecked();
@@ -571,18 +555,7 @@ pub fn wake_task(task: TaskRef) {
 /// You can obtain a `TaskRef` from a `Waker` using [`task_from_waker`].
 pub fn wake_task_no_pend(task: TaskRef) {
     let header = task.header();
-
+    if header.state.run_enqueue() {
-    let res = header.state.fetch_update(Ordering::SeqCst, Ordering::SeqCst, |state| {
-        // If already scheduled, or if not started,
-        if (state & STATE_RUN_QUEUED != 0) || (state & STATE_SPAWNED == 0) {
-            None
-        } else {
-            // Mark it as scheduled
-            Some(state | STATE_RUN_QUEUED)
-        }
-    });
-
-    if res.is_ok() {
         // We have just marked the task as scheduled, so enqueue it.
         unsafe {
             let executor = header.executor.get().unwrap_unchecked();

embassy-executor/src/raw/run_queue_atomics.rs

@@ -1,7 +1,6 @@
 use core::ptr;
 use core::ptr::NonNull;
-
+use core::sync::atomic::{AtomicPtr, Ordering};
-use atomic_polyfill::{AtomicPtr, Ordering};
 
 use super::{TaskHeader, TaskRef};
 use crate::raw::util::SyncUnsafeCell;

embassy-executor/src/raw/run_queue_critical_section.rs

@@ -0,0 +1,75 @@
+use core::cell::Cell;
+
+use critical_section::{CriticalSection, Mutex};
+
+use super::TaskRef;
+
+pub(crate) struct RunQueueItem {
+    next: Mutex<Cell<Option<TaskRef>>>,
+}
+
+impl RunQueueItem {
+    pub const fn new() -> Self {
+        Self {
+            next: Mutex::new(Cell::new(None)),
+        }
+    }
+}
+
+/// Atomic task queue using a very, very simple lock-free linked-list queue:
+///
+/// To enqueue a task, task.next is set to the old head, and head is atomically set to task.
+///
+/// Dequeuing is done in batches: the queue is emptied by atomically replacing head with
+/// null. Then the batch is iterated following the next pointers until null is reached.
+///
+/// Note that batches will be iterated in the reverse order as they were enqueued. This is OK
+/// for our purposes: it can't create fairness problems since the next batch won't run until the
+/// current batch is completely processed, so even if a task enqueues itself instantly (for example
+/// by waking its own waker) can't prevent other tasks from running.
+pub(crate) struct RunQueue {
+    head: Mutex<Cell<Option<TaskRef>>>,
+}
+
+impl RunQueue {
+    pub const fn new() -> Self {
+        Self {
+            head: Mutex::new(Cell::new(None)),
+        }
+    }
+
+    /// Enqueues an item. Returns true if the queue was empty.
+    ///
+    /// # Safety
+    ///
+    /// `item` must NOT be already enqueued in any queue.
+    #[inline(always)]
+    pub(crate) unsafe fn enqueue(&self, task: TaskRef) -> bool {
+        critical_section::with(|cs| {
+            let prev = self.head.borrow(cs).replace(Some(task));
+            task.header().run_queue_item.next.borrow(cs).set(prev);
+
+            prev.is_none()
+        })
+    }
+
+    /// Empty the queue, then call `on_task` for each task that was in the queue.
+    /// NOTE: It is OK for `on_task` to enqueue more tasks. In this case they're left in the queue
+    /// and will be processed by the *next* call to `dequeue_all`, *not* the current one.
+    pub(crate) fn dequeue_all(&self, on_task: impl Fn(TaskRef)) {
+        // Atomically empty the queue.
+        let mut next = critical_section::with(|cs| self.head.borrow(cs).take());
+
+        // Iterate the linked list of tasks that were previously in the queue.
+        while let Some(task) = next {
+            // If the task re-enqueues itself, the `next` pointer will get overwritten.
+            // Therefore, first read the next pointer, and only then process the task.
+
+            // safety: we know if the task is enqueued, no one else will touch the `next` pointer.
+            let cs = unsafe { CriticalSection::new() };
+            next = task.header().run_queue_item.next.borrow(cs).get();
+
+            on_task(task);
+        }
+    }
+}

embassy-executor/src/raw/state_atomics.rs

@@ -0,0 +1,73 @@
+use core::sync::atomic::{AtomicU32, Ordering};
+
+/// Task is spawned (has a future)
+pub(crate) const STATE_SPAWNED: u32 = 1 << 0;
+/// Task is in the executor run queue
+pub(crate) const STATE_RUN_QUEUED: u32 = 1 << 1;
+/// Task is in the executor timer queue
+#[cfg(feature = "integrated-timers")]
+pub(crate) const STATE_TIMER_QUEUED: u32 = 1 << 2;
+
+pub(crate) struct State {
+    state: AtomicU32,
+}
+
+impl State {
+    pub const fn new() -> State {
+        Self {
+            state: AtomicU32::new(0),
+        }
+    }
+
+    /// If task is idle, mark it as spawned + run_queued and return true.
+    #[inline(always)]
+    pub fn spawn(&self) -> bool {
+        self.state
+            .compare_exchange(0, STATE_SPAWNED | STATE_RUN_QUEUED, Ordering::AcqRel, Ordering::Acquire)
+            .is_ok()
+    }
+
+    /// Unmark the task as spawned.
+    #[inline(always)]
+    pub fn despawn(&self) {
+        self.state.fetch_and(!STATE_SPAWNED, Ordering::AcqRel);
+    }
+
+    /// Mark the task as run-queued if it's spawned and isn't already run-queued. Return true on success.
+    #[inline(always)]
+    pub fn run_enqueue(&self) -> bool {
+        self.state
+            .fetch_update(Ordering::SeqCst, Ordering::SeqCst, |state| {
+                // If already scheduled, or if not started,
+                if (state & STATE_RUN_QUEUED != 0) || (state & STATE_SPAWNED == 0) {
+                    None
+                } else {
+                    // Mark it as scheduled
+                    Some(state | STATE_RUN_QUEUED)
+                }
+            })
+            .is_ok()
+    }
+
+    /// Unmark the task as run-queued. Return whether the task is spawned.
+    #[inline(always)]
+    pub fn run_dequeue(&self) -> bool {
+        let state = self.state.fetch_and(!STATE_RUN_QUEUED, Ordering::AcqRel);
+        state & STATE_SPAWNED != 0
+    }
+
+    /// Mark the task as timer-queued. Return whether it was newly queued (i.e. not queued before)
+    #[cfg(feature = "integrated-timers")]
+    #[inline(always)]
+    pub fn timer_enqueue(&self) -> bool {
+        let old_state = self.state.fetch_or(STATE_TIMER_QUEUED, Ordering::AcqRel);
+        old_state & STATE_TIMER_QUEUED == 0
+    }
+
+    /// Unmark the task as timer-queued.
+    #[cfg(feature = "integrated-timers")]
+    #[inline(always)]
+    pub fn timer_dequeue(&self) {
+        self.state.fetch_and(!STATE_TIMER_QUEUED, Ordering::AcqRel);
+    }
+}

embassy-executor/src/raw/state_atomics_arm.rs

@@ -0,0 +1,103 @@
+use core::arch::asm;
+use core::sync::atomic::{compiler_fence, AtomicBool, AtomicU32, Ordering};
+
+// Must be kept in sync with the layout of `State`!
+pub(crate) const STATE_SPAWNED: u32 = 1 << 0;
+pub(crate) const STATE_RUN_QUEUED: u32 = 1 << 8;
+
+#[repr(C, align(4))]
+pub(crate) struct State {
+    /// Task is spawned (has a future)
+    spawned: AtomicBool,
+    /// Task is in the executor run queue
+    run_queued: AtomicBool,
+    /// Task is in the executor timer queue
+    timer_queued: AtomicBool,
+    pad: AtomicBool,
+}
+
+impl State {
+    pub const fn new() -> State {
+        Self {
+            spawned: AtomicBool::new(false),
+            run_queued: AtomicBool::new(false),
+            timer_queued: AtomicBool::new(false),
+            pad: AtomicBool::new(false),
+        }
+    }
+
+    fn as_u32(&self) -> &AtomicU32 {
+        unsafe { &*(self as *const _ as *const AtomicU32) }
+    }
+
+    /// If task is idle, mark it as spawned + run_queued and return true.
+    #[inline(always)]
+    pub fn spawn(&self) -> bool {
+        compiler_fence(Ordering::Release);
+        let r = self
+            .as_u32()
+            .compare_exchange(
+                0,
+                STATE_SPAWNED | STATE_RUN_QUEUED,
+                Ordering::Relaxed,
+                Ordering::Relaxed,
+            )
+            .is_ok();
+        compiler_fence(Ordering::Acquire);
+        r
+    }
+
+    /// Unmark the task as spawned.
+    #[inline(always)]
+    pub fn despawn(&self) {
+        compiler_fence(Ordering::Release);
+        self.spawned.store(false, Ordering::Relaxed);
+    }
+
+    /// Mark the task as run-queued if it's spawned and isn't already run-queued. Return true on success.
+    #[inline(always)]
+    pub fn run_enqueue(&self) -> bool {
+        unsafe {
+            loop {
+                let state: u32;
+                asm!("ldrex {}, [{}]", out(reg) state, in(reg) self, options(nostack));
+
+                if (state & STATE_RUN_QUEUED != 0) || (state & STATE_SPAWNED == 0) {
+                    asm!("clrex", options(nomem, nostack));
+                    return false;
+                }
+
+                let outcome: usize;
+                let new_state = state | STATE_RUN_QUEUED;
+                asm!("strex {}, {}, [{}]", out(reg) outcome, in(reg) new_state, in(reg) self, options(nostack));
+                if outcome == 0 {
+                    return true;
+                }
+            }
+        }
+    }
+
+    /// Unmark the task as run-queued. Return whether the task is spawned.
+    #[inline(always)]
+    pub fn run_dequeue(&self) -> bool {
+        compiler_fence(Ordering::Release);
+
+        let r = self.spawned.load(Ordering::Relaxed);
+        self.run_queued.store(false, Ordering::Relaxed);
+        r
+    }
+
+    /// Mark the task as timer-queued. Return whether it was newly queued (i.e. not queued before)
+    #[cfg(feature = "integrated-timers")]
+    #[inline(always)]
+    pub fn timer_enqueue(&self) -> bool {
+        !self.timer_queued.swap(true, Ordering::Relaxed)
+    }
+
+    /// Unmark the task as timer-queued.
+    #[cfg(feature = "integrated-timers")]
+    #[inline(always)]
+    pub fn timer_dequeue(&self) {
+        self.timer_queued.store(false, Ordering::Relaxed);
+    }
+}

embassy-executor/src/raw/state_critical_section.rs

@@ -0,0 +1,93 @@
+use core::cell::Cell;
+
+use critical_section::Mutex;
+
+/// Task is spawned (has a future)
+pub(crate) const STATE_SPAWNED: u32 = 1 << 0;
+/// Task is in the executor run queue
+pub(crate) const STATE_RUN_QUEUED: u32 = 1 << 1;
+/// Task is in the executor timer queue
+#[cfg(feature = "integrated-timers")]
+pub(crate) const STATE_TIMER_QUEUED: u32 = 1 << 2;
+
+pub(crate) struct State {
+    state: Mutex<Cell<u32>>,
+}
+
+impl State {
+    pub const fn new() -> State {
+        Self {
+            state: Mutex::new(Cell::new(0)),
+        }
+    }
+
+    fn update<R>(&self, f: impl FnOnce(&mut u32) -> R) -> R {
+        critical_section::with(|cs| {
+            let s = self.state.borrow(cs);
+            let mut val = s.get();
+            let r = f(&mut val);
+            s.set(val);
+            r
+        })
+    }
+
+    /// If task is idle, mark it as spawned + run_queued and return true.
+    #[inline(always)]
+    pub fn spawn(&self) -> bool {
+        self.update(|s| {
+            if *s == 0 {
+                *s = STATE_SPAWNED | STATE_RUN_QUEUED;
+                true
+            } else {
+                false
+            }
+        })
+    }
+
+    /// Unmark the task as spawned.
+    #[inline(always)]
+    pub fn despawn(&self) {
+        self.update(|s| *s &= !STATE_SPAWNED);
+    }
+
+    /// Mark the task as run-queued if it's spawned and isn't already run-queued. Return true on success.
+    #[inline(always)]
+    pub fn run_enqueue(&self) -> bool {
+        self.update(|s| {
+            if (*s & STATE_RUN_QUEUED != 0) || (*s & STATE_SPAWNED == 0) {
+                false
+            } else {
+                *s |= STATE_RUN_QUEUED;
+                true
+            }
+        })
+    }
+
+    /// Unmark the task as run-queued. Return whether the task is spawned.
+    #[inline(always)]
+    pub fn run_dequeue(&self) -> bool {
+        self.update(|s| {
+            let ok = *s & STATE_SPAWNED != 0;
+            *s &= !STATE_RUN_QUEUED;
+            ok
+        })
+    }
+
+    /// Mark the task as timer-queued. Return whether it was newly queued (i.e. not queued before)
+    #[cfg(feature = "integrated-timers")]
+    #[inline(always)]
+    pub fn timer_enqueue(&self) -> bool {
+        self.update(|s| {
+            let ok = *s & STATE_TIMER_QUEUED == 0;
+            *s |= STATE_TIMER_QUEUED;
+            ok
+        })
+    }
+
+    /// Unmark the task as timer-queued.
+    #[cfg(feature = "integrated-timers")]
+    #[inline(always)]
+    pub fn timer_dequeue(&self) {
+        self.update(|s| *s &= !STATE_TIMER_QUEUED);
+    }
+}

embassy-executor/src/raw/timer_queue.rs

@@ -1,9 +1,8 @@
 use core::cmp::min;
 
-use atomic_polyfill::Ordering;
 use embassy_time::Instant;
 
-use super::{TaskRef, STATE_TIMER_QUEUED};
+use super::TaskRef;
 use crate::raw::util::SyncUnsafeCell;
 
 pub(crate) struct TimerQueueItem {
@@ -32,10 +31,7 @@ impl TimerQueue {
     pub(crate) unsafe fn update(&self, p: TaskRef) {
         let task = p.header();
         if task.expires_at.get() != Instant::MAX {
-            let old_state = task.state.fetch_or(STATE_TIMER_QUEUED, Ordering::AcqRel);
+            if task.state.timer_enqueue() {
-            let is_new = old_state & STATE_TIMER_QUEUED == 0;
-
-            if is_new {
                 task.timer_queue_item.next.set(self.head.get());
                 self.head.set(Some(p));
             }
@@ -75,7 +71,7 @@ impl TimerQueue {
             } else {
                 // Remove it
                 prev.set(task.timer_queue_item.next.get());
-                task.state.fetch_and(!STATE_TIMER_QUEUED, Ordering::AcqRel);
+                task.state.timer_dequeue();
             }
         }
     }

embassy-futures/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "embassy-futures"
-version = "0.1.0"
+version = "0.1.1"
 edition = "2021"
 description = "no-std, no-alloc utilities for working with futures"
 repository = "https://github.com/embassy-rs/embassy"

embassy-net/CHANGELOG.md

@@ -8,6 +8,8 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## Unreleased
 
 - Avoid never resolving `TcpIo::read` when the output buffer is empty.
+- Update to `smoltcp` git.
+- Forward constants from `smoltcp` in DNS query results so changing DNS result size in `smoltcp` properly propagates.
 
 ## 0.2.1 - 2023-10-31
 

embassy-net/Cargo.toml

@@ -25,7 +25,7 @@ features = ["nightly", "defmt", "tcp", "udp", "dns", "dhcpv4", "proto-ipv6", "me
 default = []
 std = []
 
-defmt = ["dep:defmt", "smoltcp/defmt", "embassy-net-driver/defmt"]
+defmt = ["dep:defmt", "smoltcp/defmt", "embassy-net-driver/defmt", "heapless/defmt-03"]
 
 nightly = ["dep:embedded-io-async", "dep:embedded-nal-async"]
 
@@ -46,7 +46,7 @@ igmp = ["smoltcp/proto-igmp"]
 defmt = { version = "0.3", optional = true }
 log = { version = "0.4.14", optional = true }
 
-smoltcp = { git = "https://github.com/smoltcp-rs/smoltcp", rev = "9b791ae3057e10f7afcb70c67deb5daf714293a9", default-features = false, features = [
+smoltcp = { git = "https://github.com/smoltcp-rs/smoltcp.git", rev = "b57e2f9e70e82a13f31d5ea17e55232c11cc2b2d", default-features = false, features = [
   "socket",
   "async",
 ] }

embassy-net/src/dns.rs

@@ -63,7 +63,11 @@ where
     }
 
     /// Make a query for a given name and return the corresponding IP addresses.
-    pub async fn query(&self, name: &str, qtype: DnsQueryType) -> Result<Vec<IpAddress, 1>, Error> {
+    pub async fn query(
+        &self,
+        name: &str,
+        qtype: DnsQueryType,
+    ) -> Result<Vec<IpAddress, { smoltcp::config::DNS_MAX_RESULT_COUNT }>, Error> {
         self.stack.dns_query(name, qtype).await
     }
 }

embassy-net/src/lib.rs

@@ -494,7 +494,11 @@ impl<D: Driver> Stack<D> {
 
     /// Make a query for a given name and return the corresponding IP addresses.
     #[cfg(feature = "dns")]
-    pub async fn dns_query(&self, name: &str, qtype: dns::DnsQueryType) -> Result<Vec<IpAddress, 1>, dns::Error> {
+    pub async fn dns_query(
+        &self,
+        name: &str,
+        qtype: dns::DnsQueryType,
+    ) -> Result<Vec<IpAddress, { smoltcp::config::DNS_MAX_RESULT_COUNT }>, dns::Error> {
         // For A and AAAA queries we try detect whether `name` is just an IP address
         match qtype {
             #[cfg(feature = "proto-ipv4")]

embassy-nrf/src/buffered_uarte.rs

@@ -12,7 +12,7 @@ use core::cmp::min;
 use core::future::poll_fn;
 use core::marker::PhantomData;
 use core::slice;
-use core::sync::atomic::{compiler_fence, AtomicU8, AtomicUsize, Ordering};
+use core::sync::atomic::{compiler_fence, AtomicBool, AtomicU8, AtomicUsize, Ordering};
 use core::task::Poll;
 
 use embassy_hal_internal::atomic_ring_buffer::RingBuffer;
@@ -41,7 +41,9 @@ mod sealed {
 
         pub rx_waker: AtomicWaker,
         pub rx_buf: RingBuffer,
-        pub rx_bufs: AtomicU8,
+        pub rx_started: AtomicBool,
+        pub rx_started_count: AtomicU8,
+        pub rx_ended_count: AtomicU8,
         pub rx_ppi_ch: AtomicU8,
     }
 }
@@ -65,7 +67,9 @@ impl State {
 
             rx_waker: AtomicWaker::new(),
             rx_buf: RingBuffer::new(),
-            rx_bufs: AtomicU8::new(0),
+            rx_started: AtomicBool::new(false),
+            rx_started_count: AtomicU8::new(0),
+            rx_ended_count: AtomicU8::new(0),
             rx_ppi_ch: AtomicU8::new(0),
         }
     }
@@ -104,28 +108,20 @@ impl<U: UarteInstance> interrupt::typelevel::Handler<U::Interrupt> for Interrupt
             s.rx_waker.wake();
         }
 
-        // If not RXing, start.
+        if r.events_endrx.read().bits() != 0 {
-        if s.rx_bufs.load(Ordering::Relaxed) == 0 {
+            //trace!("  irq_rx: endrx");
-            let (ptr, len) = rx.push_buf();
+            r.events_endrx.reset();
-            if len >= half_len {
-                //trace!("  irq_rx: starting {:?}", half_len);
-                s.rx_bufs.store(1, Ordering::Relaxed);
 
-                // Set up the DMA read
+            let val = s.rx_ended_count.load(Ordering::Relaxed);
-                r.rxd.ptr.write(|w| unsafe { w.ptr().bits(ptr as u32) });
+            s.rx_ended_count.store(val.wrapping_add(1), Ordering::Relaxed);
-                r.rxd.maxcnt.write(|w| unsafe { w.maxcnt().bits(half_len as _) });
-
-                // Start UARTE Receive transaction
-                r.tasks_startrx.write(|w| unsafe { w.bits(1) });
-                rx.push_done(half_len);
-                r.intenset.write(|w| w.rxstarted().set());
-            }
         }
 
-        if r.events_rxstarted.read().bits() != 0 {
+        if r.events_rxstarted.read().bits() != 0 || !s.rx_started.load(Ordering::Relaxed) {
             //trace!("  irq_rx: rxstarted");
             let (ptr, len) = rx.push_buf();
             if len >= half_len {
+                r.events_rxstarted.reset();
+
                 //trace!("  irq_rx: starting second {:?}", half_len);
 
                 // Set up the DMA read
@@ -134,11 +130,50 @@ impl<U: UarteInstance> interrupt::typelevel::Handler<U::Interrupt> for Interrupt
 
                 let chn = s.rx_ppi_ch.load(Ordering::Relaxed);
 
+                // Enable endrx -> startrx PPI channel.
+                // From this point on, if endrx happens, startrx is automatically fired.
                 ppi::regs().chenset.write(|w| unsafe { w.bits(1 << chn) });
 
+                // It is possible that endrx happened BEFORE enabling the PPI. In this case
+                // the PPI channel doesn't trigger, and we'd hang. We have to detect this
+                // and manually start.
+
+                // check again in case endrx has happened between the last check and now.
+                if r.events_endrx.read().bits() != 0 {
+                    //trace!("  irq_rx: endrx");
+                    r.events_endrx.reset();
+
+                    let val = s.rx_ended_count.load(Ordering::Relaxed);
+                    s.rx_ended_count.store(val.wrapping_add(1), Ordering::Relaxed);
+                }
+
+                let rx_ended = s.rx_ended_count.load(Ordering::Relaxed);
+                let rx_started = s.rx_started_count.load(Ordering::Relaxed);
+
+                // If we started the same amount of transfers as ended, the last rxend has
+                // already occured.
+                let rxend_happened = rx_started == rx_ended;
+
+                // Check if the PPI channel is still enabled. The PPI channel disables itself
+                // when it fires, so if it's still enabled it hasn't fired.
+                let ppi_ch_enabled = ppi::regs().chen.read().bits() & (1 << chn) != 0;
+
+                // if rxend happened, and the ppi channel hasn't fired yet, the rxend got missed.
+                // this condition also naturally matches if `!started`, needed to kickstart the DMA.
+                if rxend_happened && ppi_ch_enabled {
+                    //trace!("manually starting.");
+
+                    // disable the ppi ch, it's of no use anymore.
+                    ppi::regs().chenclr.write(|w| unsafe { w.bits(1 << chn) });
+
+                    // manually start
+                    r.tasks_startrx.write(|w| unsafe { w.bits(1) });
+                }
+
                 rx.push_done(half_len);
 
-                r.events_rxstarted.reset();
+                s.rx_started_count.store(rx_started.wrapping_add(1), Ordering::Relaxed);
+                s.rx_started.store(true, Ordering::Relaxed);
             } else {
                 //trace!("  irq_rx: rxstarted no buf");
                 r.intenclr.write(|w| w.rxstarted().clear());
@@ -282,6 +317,8 @@ impl<'d, U: UarteInstance, T: TimerInstance> BufferedUarte<'d, U, T> {
 
         let r = U::regs();
 
+        let hwfc = cts.is_some();
+
         rxd.conf().write(|w| w.input().connect().drive().h0h1());
         r.psel.rxd.write(|w| unsafe { w.bits(rxd.psel_bits()) });
 
@@ -303,7 +340,8 @@ impl<'d, U: UarteInstance, T: TimerInstance> BufferedUarte<'d, U, T> {
         // Initialize state
         let s = U::buffered_state();
         s.tx_count.store(0, Ordering::Relaxed);
-        s.rx_bufs.store(0, Ordering::Relaxed);
+        s.rx_started_count.store(0, Ordering::Relaxed);
+        s.rx_ended_count.store(0, Ordering::Relaxed);
         let len = tx_buffer.len();
         unsafe { s.tx_buf.init(tx_buffer.as_mut_ptr(), len) };
         let len = rx_buffer.len();
@@ -311,7 +349,7 @@ impl<'d, U: UarteInstance, T: TimerInstance> BufferedUarte<'d, U, T> {
 
         // Configure
         r.config.write(|w| {
-            w.hwfc().bit(false);
+            w.hwfc().bit(hwfc);
             w.parity().variant(config.parity);
             w
         });
@@ -333,6 +371,7 @@ impl<'d, U: UarteInstance, T: TimerInstance> BufferedUarte<'d, U, T> {
             w.endtx().set();
             w.rxstarted().set();
             w.error().set();
+            w.endrx().set();
             w
         });
 

embassy-rp/Cargo.toml

@@ -94,5 +94,5 @@ pio = {version= "0.2.1" }
 rp2040-boot2 = "0.3"
 
 [dev-dependencies]
-embassy-executor = { version = "0.3.1", path = "../embassy-executor", features = ["nightly", "arch-std", "executor-thread"] }
+embassy-executor = { version = "0.3.3", path = "../embassy-executor", features = ["nightly", "arch-std", "executor-thread"] }
 static_cell = { version = "2" }

embassy-stm32/Cargo.toml

@@ -39,7 +39,7 @@ embassy-hal-internal = {version = "0.1.0", path = "../embassy-hal-internal", fea
 embassy-embedded-hal = {version = "0.1.0", path = "../embassy-embedded-hal" }
 embassy-net-driver = { version = "0.2.0", path = "../embassy-net-driver" }
 embassy-usb-driver = {version = "0.1.0", path = "../embassy-usb-driver", optional = true }
-embassy-executor = { version = "0.3.1", path = "../embassy-executor", optional = true }
+embassy-executor = { version = "0.3.3", path = "../embassy-executor", optional = true }
 
 embedded-hal-02 = { package = "embedded-hal", version = "0.2.6", features = ["unproven"] }
 embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.1", optional = true}
@@ -58,7 +58,7 @@ rand_core = "0.6.3"
 sdio-host = "0.5.0"
 embedded-sdmmc = { git = "https://github.com/embassy-rs/embedded-sdmmc-rs", rev = "a4f293d3a6f72158385f79c98634cb8a14d0d2fc", optional = true }
 critical-section = "1.1"
-stm32-metapac = { git = "https://github.com/embassy-rs/stm32-data-generated", tag = "stm32-data-fbb8f77326dd066aa6c0d66b3b46e76a569dda8b" }
+stm32-metapac = { git = "https://github.com/embassy-rs/stm32-data-generated", tag = "stm32-data-f6d1ffc1a25f208b5cd6b1024bff246592da1949" }
 vcell = "0.1.3"
 bxcan = "0.7.0"
 nb = "1.0.0"
@@ -76,7 +76,7 @@ critical-section = { version = "1.1", features = ["std"] }
 [build-dependencies]
 proc-macro2 = "1.0.36"
 quote = "1.0.15"
-stm32-metapac = { git = "https://github.com/embassy-rs/stm32-data-generated", tag = "stm32-data-fbb8f77326dd066aa6c0d66b3b46e76a569dda8b", default-features = false, features = ["metadata"]}
+stm32-metapac = { git = "https://github.com/embassy-rs/stm32-data-generated", tag = "stm32-data-f6d1ffc1a25f208b5cd6b1024bff246592da1949", default-features = false, features = ["metadata"]}
 
 
 [features]

embassy-stm32/build.rs

@@ -1137,6 +1137,23 @@ fn main() {
         }
     }
 
+    // ========
+    // Write peripheral_interrupts module.
+    let mut mt = TokenStream::new();
+    for p in METADATA.peripherals {
+        let mut pt = TokenStream::new();
+
+        for irq in p.interrupts {
+            let iname = format_ident!("{}", irq.interrupt);
+            let sname = format_ident!("{}", irq.signal);
+            pt.extend(quote!(pub type #sname = crate::interrupt::typelevel::#iname;));
+        }
+
+        let pname = format_ident!("{}", p.name);
+        mt.extend(quote!(pub mod #pname { #pt }));
+    }
+    g.extend(quote!(#[allow(non_camel_case_types)] pub mod peripheral_interrupts { #mt }));
+
     // ========
     // Write foreach_foo! macrotables
 
@@ -1295,6 +1312,9 @@ fn main() {
 
     let mut m = String::new();
 
+    // DO NOT ADD more macros like these.
+    // These turned to be a bad idea!
+    // Instead, make build.rs generate the final code.
     make_table(&mut m, "foreach_flash_region", &flash_regions_table);
     make_table(&mut m, "foreach_interrupt", &interrupts_table);
     make_table(&mut m, "foreach_peripheral", &peripherals_table);

embassy-stm32/src/dma/gpdma.rs

@@ -299,19 +299,15 @@ impl<'a, C: Channel> Transfer<'a, C> {
 
     pub fn request_stop(&mut self) {
         let ch = self.channel.regs().ch(self.channel.num());
-
+        ch.cr().modify(|w| {
-        // Disable the channel. Keep the IEs enabled so the irqs still fire.
+            w.set_susp(true);
-        ch.cr().write(|w| {
-            w.set_tcie(true);
-            w.set_useie(true);
-            w.set_dteie(true);
-            w.set_suspie(true);
         })
     }
 
     pub fn is_running(&mut self) -> bool {
         let ch = self.channel.regs().ch(self.channel.num());
-        !ch.sr().read().tcf()
+        let sr = ch.sr().read();
+        !sr.tcf() && !sr.suspf()
     }
 
     /// Gets the total remaining transfers for the channel

embassy-stm32/src/i2c/mod.rs

@@ -1,11 +1,14 @@
 #![macro_use]
 
+use core::marker::PhantomData;
+
 use crate::interrupt;
 
 #[cfg_attr(i2c_v1, path = "v1.rs")]
 #[cfg_attr(i2c_v2, path = "v2.rs")]
 mod _version;
 pub use _version::*;
+use embassy_sync::waitqueue::AtomicWaker;
 
 use crate::peripherals;
 
@@ -23,6 +26,20 @@ pub enum Error {
 
 pub(crate) mod sealed {
     use super::*;
+
+    pub struct State {
+        #[allow(unused)]
+        pub waker: AtomicWaker,
+    }
+
+    impl State {
+        pub const fn new() -> Self {
+            Self {
+                waker: AtomicWaker::new(),
+            }
+        }
+    }
+
     pub trait Instance: crate::rcc::RccPeripheral {
         fn regs() -> crate::pac::i2c::I2c;
         fn state() -> &'static State;
@@ -30,7 +47,8 @@ pub(crate) mod sealed {
 }
 
 pub trait Instance: sealed::Instance + 'static {
-    type Interrupt: interrupt::typelevel::Interrupt;
+    type EventInterrupt: interrupt::typelevel::Interrupt;
+    type ErrorInterrupt: interrupt::typelevel::Interrupt;
 }
 
 pin_trait!(SclPin, Instance);
@@ -38,21 +56,148 @@ pin_trait!(SdaPin, Instance);
 dma_trait!(RxDma, Instance);
 dma_trait!(TxDma, Instance);
 
-foreach_interrupt!(
+/// Interrupt handler.
-    ($inst:ident, i2c, $block:ident, EV, $irq:ident) => {
+pub struct EventInterruptHandler<T: Instance> {
+    _phantom: PhantomData<T>,
+}
+
+impl<T: Instance> interrupt::typelevel::Handler<T::EventInterrupt> for EventInterruptHandler<T> {
+    unsafe fn on_interrupt() {
+        _version::on_interrupt::<T>()
+    }
+}
+
+pub struct ErrorInterruptHandler<T: Instance> {
+    _phantom: PhantomData<T>,
+}
+
+impl<T: Instance> interrupt::typelevel::Handler<T::ErrorInterrupt> for ErrorInterruptHandler<T> {
+    unsafe fn on_interrupt() {
+        _version::on_interrupt::<T>()
+    }
+}
+
+foreach_peripheral!(
+    (i2c, $inst:ident) => {
         impl sealed::Instance for peripherals::$inst {
             fn regs() -> crate::pac::i2c::I2c {
                 crate::pac::$inst
             }
 
-            fn state() -> &'static State {
+            fn state() -> &'static sealed::State {
-                static STATE: State = State::new();
+                static STATE: sealed::State = sealed::State::new();
                 &STATE
             }
         }
 
         impl Instance for peripherals::$inst {
-            type Interrupt = crate::interrupt::typelevel::$irq;
+            type EventInterrupt = crate::_generated::peripheral_interrupts::$inst::EV;
+            type ErrorInterrupt = crate::_generated::peripheral_interrupts::$inst::ER;
         }
     };
 );
+
+mod eh02 {
+    use super::*;
+
+    impl<'d, T: Instance> embedded_hal_02::blocking::i2c::Read for I2c<'d, T> {
+        type Error = Error;
+
+        fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Self::Error> {
+            self.blocking_read(address, buffer)
+        }
+    }
+
+    impl<'d, T: Instance> embedded_hal_02::blocking::i2c::Write for I2c<'d, T> {
+        type Error = Error;
+
+        fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Self::Error> {
+            self.blocking_write(address, write)
+        }
+    }
+
+    impl<'d, T: Instance> embedded_hal_02::blocking::i2c::WriteRead for I2c<'d, T> {
+        type Error = Error;
+
+        fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
+            self.blocking_write_read(address, write, read)
+        }
+    }
+}
+
+#[cfg(feature = "unstable-traits")]
+mod eh1 {
+    use super::*;
+    use crate::dma::NoDma;
+
+    impl embedded_hal_1::i2c::Error for Error {
+        fn kind(&self) -> embedded_hal_1::i2c::ErrorKind {
+            match *self {
+                Self::Bus => embedded_hal_1::i2c::ErrorKind::Bus,
+                Self::Arbitration => embedded_hal_1::i2c::ErrorKind::ArbitrationLoss,
+                Self::Nack => {
+                    embedded_hal_1::i2c::ErrorKind::NoAcknowledge(embedded_hal_1::i2c::NoAcknowledgeSource::Unknown)
+                }
+                Self::Timeout => embedded_hal_1::i2c::ErrorKind::Other,
+                Self::Crc => embedded_hal_1::i2c::ErrorKind::Other,
+                Self::Overrun => embedded_hal_1::i2c::ErrorKind::Overrun,
+                Self::ZeroLengthTransfer => embedded_hal_1::i2c::ErrorKind::Other,
+            }
+        }
+    }
+
+    impl<'d, T: Instance, TXDMA, RXDMA> embedded_hal_1::i2c::ErrorType for I2c<'d, T, TXDMA, RXDMA> {
+        type Error = Error;
+    }
+
+    impl<'d, T: Instance> embedded_hal_1::i2c::I2c for I2c<'d, T, NoDma, NoDma> {
+        fn read(&mut self, address: u8, read: &mut [u8]) -> Result<(), Self::Error> {
+            self.blocking_read(address, read)
+        }
+
+        fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Self::Error> {
+            self.blocking_write(address, write)
+        }
+
+        fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
+            self.blocking_write_read(address, write, read)
+        }
+
+        fn transaction(
+            &mut self,
+            _address: u8,
+            _operations: &mut [embedded_hal_1::i2c::Operation<'_>],
+        ) -> Result<(), Self::Error> {
+            todo!();
+        }
+    }
+}
+
+#[cfg(all(feature = "unstable-traits", feature = "nightly", feature = "time"))]
+mod eha {
+    use super::*;
+
+    impl<'d, T: Instance, TXDMA: TxDma<T>, RXDMA: RxDma<T>> embedded_hal_async::i2c::I2c for I2c<'d, T, TXDMA, RXDMA> {
+        async fn read(&mut self, address: u8, read: &mut [u8]) -> Result<(), Self::Error> {
+            self.read(address, read).await
+        }
+
+        async fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Self::Error> {
+            self.write(address, write).await
+        }
+
+        async fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
+            self.write_read(address, write, read).await
+        }
+
+        async fn transaction(
+            &mut self,
+            address: u8,
+            operations: &mut [embedded_hal_1::i2c::Operation<'_>],
+        ) -> Result<(), Self::Error> {
+            let _ = address;
+            let _ = operations;
+            todo!()
+        }
+    }
+}

embassy-stm32/src/i2c/v1.rs

@@ -1,23 +1,33 @@
+use core::future::poll_fn;
 use core::marker::PhantomData;
+use core::task::Poll;
 
 use embassy_embedded_hal::SetConfig;
+use embassy_futures::select::{select, Either};
+use embassy_hal_internal::drop::OnDrop;
 use embassy_hal_internal::{into_ref, PeripheralRef};
 
-use crate::dma::NoDma;
+use super::*;
+use crate::dma::{NoDma, Transfer};
 use crate::gpio::sealed::AFType;
 use crate::gpio::Pull;
-use crate::i2c::{Error, Instance, SclPin, SdaPin};
+use crate::interrupt::typelevel::Interrupt;
 use crate::pac::i2c;
 use crate::time::Hertz;
 use crate::{interrupt, Peripheral};
 
-/// Interrupt handler.
+pub unsafe fn on_interrupt<T: Instance>() {
-pub struct InterruptHandler<T: Instance> {
+    let regs = T::regs();
-    _phantom: PhantomData<T>,
+    // i2c v2 only woke the task on transfer complete interrupts. v1 uses interrupts for a bunch of
-}
+    // other stuff, so we wake the task on every interrupt.
-
+    T::state().waker.wake();
-impl<T: Instance> interrupt::typelevel::Handler<T::Interrupt> for InterruptHandler<T> {
+    critical_section::with(|_| {
-    unsafe fn on_interrupt() {}
+        // Clear event interrupt flag.
+        regs.cr2().modify(|w| {
+            w.set_itevten(false);
+            w.set_iterren(false);
+        });
+    });
 }
 
 #[non_exhaustive]
@@ -27,14 +37,6 @@ pub struct Config {
     pub scl_pullup: bool,
 }
 
-pub struct State {}
-
-impl State {
-    pub(crate) const fn new() -> Self {
-        Self {}
-    }
-}
-
 pub struct I2c<'d, T: Instance, TXDMA = NoDma, RXDMA = NoDma> {
     phantom: PhantomData<&'d mut T>,
     #[allow(dead_code)]
@@ -48,7 +50,9 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         _peri: impl Peripheral<P = T> + 'd,
         scl: impl Peripheral<P = impl SclPin<T>> + 'd,
         sda: impl Peripheral<P = impl SdaPin<T>> + 'd,
-        _irq: impl interrupt::typelevel::Binding<T::Interrupt, InterruptHandler<T>> + 'd,
+        _irq: impl interrupt::typelevel::Binding<T::EventInterrupt, EventInterruptHandler<T>>
+            + interrupt::typelevel::Binding<T::ErrorInterrupt, ErrorInterruptHandler<T>>
+            + 'd,
         tx_dma: impl Peripheral<P = TXDMA> + 'd,
         rx_dma: impl Peripheral<P = RXDMA> + 'd,
         freq: Hertz,
@@ -98,6 +102,9 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
             reg.set_pe(true);
         });
 
+        unsafe { T::EventInterrupt::enable() };
+        unsafe { T::ErrorInterrupt::enable() };
+
         Self {
             phantom: PhantomData,
             tx_dma,
@@ -105,40 +112,58 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         }
     }
 
-    fn check_and_clear_error_flags(&self) -> Result<i2c::regs::Sr1, Error> {
+    fn check_and_clear_error_flags() -> Result<i2c::regs::Sr1, Error> {
         // Note that flags should only be cleared once they have been registered. If flags are
         // cleared otherwise, there may be an inherent race condition and flags may be missed.
         let sr1 = T::regs().sr1().read();
 
         if sr1.timeout() {
-            T::regs().sr1().modify(|reg| reg.set_timeout(false));
+            T::regs().sr1().write(|reg| {
+                reg.0 = !0;
+                reg.set_timeout(false);
+            });
             return Err(Error::Timeout);
         }
 
         if sr1.pecerr() {
-            T::regs().sr1().modify(|reg| reg.set_pecerr(false));
+            T::regs().sr1().write(|reg| {
+                reg.0 = !0;
+                reg.set_pecerr(false);
+            });
             return Err(Error::Crc);
         }
 
         if sr1.ovr() {
-            T::regs().sr1().modify(|reg| reg.set_ovr(false));
+            T::regs().sr1().write(|reg| {
+                reg.0 = !0;
+                reg.set_ovr(false);
+            });
             return Err(Error::Overrun);
         }
 
         if sr1.af() {
-            T::regs().sr1().modify(|reg| reg.set_af(false));
+            T::regs().sr1().write(|reg| {
+                reg.0 = !0;
+                reg.set_af(false);
+            });
             return Err(Error::Nack);
         }
 
         if sr1.arlo() {
-            T::regs().sr1().modify(|reg| reg.set_arlo(false));
+            T::regs().sr1().write(|reg| {
+                reg.0 = !0;
+                reg.set_arlo(false);
+            });
             return Err(Error::Arbitration);
         }
 
         // The errata indicates that BERR may be incorrectly detected. It recommends ignoring and
         // clearing the BERR bit instead.
         if sr1.berr() {
-            T::regs().sr1().modify(|reg| reg.set_berr(false));
+            T::regs().sr1().write(|reg| {
+                reg.0 = !0;
+                reg.set_berr(false);
+            });
         }
 
         Ok(sr1)
@@ -157,13 +182,13 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         });
 
         // Wait until START condition was generated
-        while !self.check_and_clear_error_flags()?.start() {
+        while !Self::check_and_clear_error_flags()?.start() {
             check_timeout()?;
         }
 
         // Also wait until signalled we're master and everything is waiting for us
         while {
-            self.check_and_clear_error_flags()?;
+            Self::check_and_clear_error_flags()?;
 
             let sr2 = T::regs().sr2().read();
             !sr2.msl() && !sr2.busy()
@@ -177,7 +202,7 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         // Wait until address was sent
         // Wait for the address to be acknowledged
         // Check for any I2C errors. If a NACK occurs, the ADDR bit will never be set.
-        while !self.check_and_clear_error_flags()?.addr() {
+        while !Self::check_and_clear_error_flags()?.addr() {
             check_timeout()?;
         }
 
@@ -197,7 +222,7 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         // Wait until we're ready for sending
         while {
             // Check for any I2C errors. If a NACK occurs, the ADDR bit will never be set.
-            !self.check_and_clear_error_flags()?.txe()
+            !Self::check_and_clear_error_flags()?.txe()
         } {
             check_timeout()?;
         }
@@ -208,7 +233,7 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         // Wait until byte is transferred
         while {
             // Check for any potential error conditions.
-            !self.check_and_clear_error_flags()?.btf()
+            !Self::check_and_clear_error_flags()?.btf()
         } {
             check_timeout()?;
         }
@@ -219,7 +244,7 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
     fn recv_byte(&self, check_timeout: impl Fn() -> Result<(), Error>) -> Result<u8, Error> {
         while {
             // Check for any potential error conditions.
-            self.check_and_clear_error_flags()?;
+            Self::check_and_clear_error_flags()?;
 
             !T::regs().sr1().read().rxne()
         } {
@@ -244,7 +269,7 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
             });
 
             // Wait until START condition was generated
-            while !self.check_and_clear_error_flags()?.start() {
+            while !Self::check_and_clear_error_flags()?.start() {
                 check_timeout()?;
             }
 
@@ -261,7 +286,7 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
 
             // Wait until address was sent
             // Wait for the address to be acknowledged
-            while !self.check_and_clear_error_flags()?.addr() {
+            while !Self::check_and_clear_error_flags()?.addr() {
                 check_timeout()?;
             }
 
@@ -336,6 +361,322 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
     pub fn blocking_write_read(&mut self, addr: u8, write: &[u8], read: &mut [u8]) -> Result<(), Error> {
         self.blocking_write_read_timeout(addr, write, read, || Ok(()))
     }
+
+    // Async
+
+    #[inline] // pretty sure this should always be inlined
+    fn enable_interrupts() -> () {
+        T::regs().cr2().modify(|w| {
+            w.set_iterren(true);
+            w.set_itevten(true);
+        });
+    }
+
+    pub async fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Error>
+    where
+        TXDMA: crate::i2c::TxDma<T>,
+    {
+        let dma_transfer = unsafe {
+            let regs = T::regs();
+            regs.cr2().modify(|w| {
+                // DMA mode can be enabled for transmission by setting the DMAEN bit in the I2C_CR2 register.
+                w.set_dmaen(true);
+                w.set_itbufen(false);
+            });
+            // Set the I2C_DR register address in the DMA_SxPAR register. The data will be moved to this address from the memory after each TxE event.
+            let dst = regs.dr().as_ptr() as *mut u8;
+
+            let ch = &mut self.tx_dma;
+            let request = ch.request();
+            Transfer::new_write(ch, request, write, dst, Default::default())
+        };
+
+        let on_drop = OnDrop::new(|| {
+            let regs = T::regs();
+            regs.cr2().modify(|w| {
+                w.set_dmaen(false);
+                w.set_iterren(false);
+                w.set_itevten(false);
+            })
+        });
+
+        Self::enable_interrupts();
+
+        // Send a START condition
+        T::regs().cr1().modify(|reg| {
+            reg.set_start(true);
+        });
+
+        let state = T::state();
+
+        // Wait until START condition was generated
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err(e)),
+                Ok(sr1) => {
+                    if sr1.start() {
+                        Poll::Ready(Ok(()))
+                    } else {
+                        Poll::Pending
+                    }
+                }
+            }
+        })
+        .await?;
+
+        // Also wait until signalled we're master and everything is waiting for us
+        Self::enable_interrupts();
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err(e)),
+                Ok(_) => {
+                    let sr2 = T::regs().sr2().read();
+                    if !sr2.msl() && !sr2.busy() {
+                        Poll::Pending
+                    } else {
+                        Poll::Ready(Ok(()))
+                    }
+                }
+            }
+        })
+        .await?;
+
+        // Set up current address, we're trying to talk to
+        T::regs().dr().write(|reg| reg.set_dr(address << 1));
+        Self::enable_interrupts();
+
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err(e)),
+                Ok(sr1) => {
+                    if sr1.addr() {
+                        // Clear the ADDR condition by reading SR2.
+                        T::regs().sr2().read();
+                        Poll::Ready(Ok(()))
+                    } else {
+                        Poll::Pending
+                    }
+                }
+            }
+        })
+        .await?;
+
+        Self::enable_interrupts();
+        let poll_error = poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            match Self::check_and_clear_error_flags() {
+                // Unclear why the Err turbofish is necessary here? The compiler didn’t require it in the other
+                // identical poll_fn check_and_clear matches.
+                Err(e) => Poll::Ready(Err::<T, Error>(e)),
+                Ok(_) => Poll::Pending,
+            }
+        });
+
+        // Wait for either the DMA transfer to successfully finish, or an I2C error to occur.
+        match select(dma_transfer, poll_error).await {
+            Either::Second(Err(e)) => Err(e),
+            _ => Ok(()),
+        }?;
+
+        // The I2C transfer itself will take longer than the DMA transfer, so wait for that to finish too.
+
+        // 18.3.8 “Master transmitter: In the interrupt routine after the EOT interrupt, disable DMA
+        // requests then wait for a BTF event before programming the Stop condition.”
+
+        // TODO: If this has to be done “in the interrupt routine after the EOT interrupt”, where to put it?
+        T::regs().cr2().modify(|w| {
+            w.set_dmaen(false);
+        });
+
+        Self::enable_interrupts();
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err(e)),
+                Ok(sr1) => {
+                    if sr1.btf() {
+                        T::regs().cr1().modify(|w| {
+                            w.set_stop(true);
+                        });
+                        Poll::Ready(Ok(()))
+                    } else {
+                        Poll::Pending
+                    }
+                }
+            }
+        })
+        .await?;
+        // Wait for STOP condition to transmit.
+        Self::enable_interrupts();
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            if T::regs().cr1().read().stop() {
+                Poll::Pending
+            } else {
+                Poll::Ready(Ok(()))
+            }
+        })
+        .await?;
+
+        drop(on_drop);
+
+        // Fallthrough is success
+        Ok(())
+    }
+
+    pub async fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Error>
+    where
+        RXDMA: crate::i2c::RxDma<T>,
+    {
+        let state = T::state();
+        let buffer_len = buffer.len();
+
+        let dma_transfer = unsafe {
+            let regs = T::regs();
+            regs.cr2().modify(|w| {
+                // DMA mode can be enabled for transmission by setting the DMAEN bit in the I2C_CR2 register.
+                w.set_itbufen(false);
+                w.set_dmaen(true);
+            });
+            // Set the I2C_DR register address in the DMA_SxPAR register. The data will be moved to this address from the memory after each TxE event.
+            let src = regs.dr().as_ptr() as *mut u8;
+
+            let ch = &mut self.rx_dma;
+            let request = ch.request();
+            Transfer::new_read(ch, request, src, buffer, Default::default())
+        };
+
+        let on_drop = OnDrop::new(|| {
+            let regs = T::regs();
+            regs.cr2().modify(|w| {
+                w.set_dmaen(false);
+                w.set_iterren(false);
+                w.set_itevten(false);
+            })
+        });
+
+        Self::enable_interrupts();
+
+        // Send a START condition and set ACK bit
+        T::regs().cr1().modify(|reg| {
+            reg.set_start(true);
+            reg.set_ack(true);
+        });
+
+        // Wait until START condition was generated
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err(e)),
+                Ok(sr1) => {
+                    if sr1.start() {
+                        Poll::Ready(Ok(()))
+                    } else {
+                        Poll::Pending
+                    }
+                }
+            }
+        })
+        .await?;
+
+        // Also wait until signalled we're master and everything is waiting for us
+        Self::enable_interrupts();
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            // blocking read didn’t have a check_and_clear call here, but blocking write did so
+            // I’m adding it here in case that was an oversight.
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err(e)),
+                Ok(_) => {
+                    let sr2 = T::regs().sr2().read();
+                    if !sr2.msl() && !sr2.busy() {
+                        Poll::Pending
+                    } else {
+                        Poll::Ready(Ok(()))
+                    }
+                }
+            }
+        })
+        .await?;
+
+        // Set up current address, we're trying to talk to
+        T::regs().dr().write(|reg| reg.set_dr((address << 1) + 1));
+
+        // Wait for the address to be acknowledged
+
+        Self::enable_interrupts();
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err(e)),
+                Ok(sr1) => {
+                    if sr1.addr() {
+                        // 18.3.8: When a single byte must be received: the NACK must be programmed during EV6
+                        // event, i.e. program ACK=0 when ADDR=1, before clearing ADDR flag. Then the
+                        // user can program the STOP condition either after clearing ADDR flag, or in the
+                        // DMA Transfer Complete interrupt routine.
+                        if buffer_len == 1 {
+                            T::regs().cr1().modify(|w| {
+                                w.set_ack(false);
+                            });
+                        }
+                        Poll::Ready(Ok(()))
+                    } else {
+                        Poll::Pending
+                    }
+                }
+            }
+        })
+        .await?;
+
+        // Clear condition by reading SR2
+        T::regs().sr2().read();
+
+        // Wait for bytes to be received, or an error to occur.
+        Self::enable_interrupts();
+        let poll_error = poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err::<T, Error>(e)),
+                _ => Poll::Pending,
+            }
+        });
+
+        match select(dma_transfer, poll_error).await {
+            Either::Second(Err(e)) => Err(e),
+            _ => Ok(()),
+        };
+
+        // v1 blocking waits for STOP to be written, the manual says to write the STOP bit yourself.
+        // what to do…
+        // Wait for the STOP to be sent.
+        // while T::regs().cr1().read().stop() {
+        //     check_timeout()?;
+        // }
+
+        // Fallthrough is success
+        Ok(())
+    }
+
+    pub async fn write_read(&mut self, _address: u8, _write: &[u8], _read: &mut [u8]) -> Result<(), Error>
+    where
+        RXDMA: crate::i2c::RxDma<T>,
+        TXDMA: crate::i2c::TxDma<T>,
+    {
+        todo!()
+    }
 }
 
 impl<'d, T: Instance, TXDMA, RXDMA> Drop for I2c<'d, T, TXDMA, RXDMA> {
@@ -344,77 +685,6 @@ impl<'d, T: Instance, TXDMA, RXDMA> Drop for I2c<'d, T, TXDMA, RXDMA> {
     }
 }
 
-impl<'d, T: Instance> embedded_hal_02::blocking::i2c::Read for I2c<'d, T> {
-    type Error = Error;
-
-    fn read(&mut self, addr: u8, read: &mut [u8]) -> Result<(), Self::Error> {
-        self.blocking_read(addr, read)
-    }
-}
-
-impl<'d, T: Instance> embedded_hal_02::blocking::i2c::Write for I2c<'d, T> {
-    type Error = Error;
-
-    fn write(&mut self, addr: u8, write: &[u8]) -> Result<(), Self::Error> {
-        self.blocking_write(addr, write)
-    }
-}
-
-impl<'d, T: Instance> embedded_hal_02::blocking::i2c::WriteRead for I2c<'d, T> {
-    type Error = Error;
-
-    fn write_read(&mut self, addr: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
-        self.blocking_write_read(addr, write, read)
-    }
-}
-
-#[cfg(feature = "unstable-traits")]
-mod eh1 {
-    use super::*;
-
-    impl embedded_hal_1::i2c::Error for Error {
-        fn kind(&self) -> embedded_hal_1::i2c::ErrorKind {
-            match *self {
-                Self::Bus => embedded_hal_1::i2c::ErrorKind::Bus,
-                Self::Arbitration => embedded_hal_1::i2c::ErrorKind::ArbitrationLoss,
-                Self::Nack => {
-                    embedded_hal_1::i2c::ErrorKind::NoAcknowledge(embedded_hal_1::i2c::NoAcknowledgeSource::Unknown)
-                }
-                Self::Timeout => embedded_hal_1::i2c::ErrorKind::Other,
-                Self::Crc => embedded_hal_1::i2c::ErrorKind::Other,
-                Self::Overrun => embedded_hal_1::i2c::ErrorKind::Overrun,
-                Self::ZeroLengthTransfer => embedded_hal_1::i2c::ErrorKind::Other,
-            }
-        }
-    }
-
-    impl<'d, T: Instance> embedded_hal_1::i2c::ErrorType for I2c<'d, T> {
-        type Error = Error;
-    }
-
-    impl<'d, T: Instance> embedded_hal_1::i2c::I2c for I2c<'d, T> {
-        fn read(&mut self, address: u8, read: &mut [u8]) -> Result<(), Self::Error> {
-            self.blocking_read(address, read)
-        }
-
-        fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Self::Error> {
-            self.blocking_write(address, write)
-        }
-
-        fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
-            self.blocking_write_read(address, write, read)
-        }
-
-        fn transaction(
-            &mut self,
-            _address: u8,
-            _operations: &mut [embedded_hal_1::i2c::Operation<'_>],
-        ) -> Result<(), Self::Error> {
-            todo!();
-        }
-    }
-}
-
 enum Mode {
     Fast,
     Standard,

embassy-stm32/src/i2c/v2.rs

@@ -1,48 +1,51 @@
 use core::cmp;
-#[cfg(feature = "time")]
 use core::future::poll_fn;
-use core::marker::PhantomData;
-#[cfg(feature = "time")]
 use core::task::Poll;
 
 use embassy_embedded_hal::SetConfig;
-#[cfg(feature = "time")]
 use embassy_hal_internal::drop::OnDrop;
 use embassy_hal_internal::{into_ref, PeripheralRef};
-use embassy_sync::waitqueue::AtomicWaker;
 #[cfg(feature = "time")]
 use embassy_time::{Duration, Instant};
 
-use crate::dma::NoDma;
+use super::*;
-#[cfg(feature = "time")]
+use crate::dma::{NoDma, Transfer};
-use crate::dma::Transfer;
 use crate::gpio::sealed::AFType;
 use crate::gpio::Pull;
-use crate::i2c::{Error, Instance, SclPin, SdaPin};
 use crate::interrupt::typelevel::Interrupt;
 use crate::pac::i2c;
 use crate::time::Hertz;
 use crate::{interrupt, Peripheral};
 
-/// Interrupt handler.
+#[cfg(feature = "time")]
-pub struct InterruptHandler<T: Instance> {
+fn timeout_fn(timeout: Duration) -> impl Fn() -> Result<(), Error> {
-    _phantom: PhantomData<T>,
+    let deadline = Instant::now() + timeout;
+    move || {
+        if Instant::now() > deadline {
+            Err(Error::Timeout)
+        } else {
+            Ok(())
+        }
+    }
 }
 
-impl<T: Instance> interrupt::typelevel::Handler<T::Interrupt> for InterruptHandler<T> {
+#[cfg(not(feature = "time"))]
-    unsafe fn on_interrupt() {
+pub fn no_timeout_fn() -> impl Fn() -> Result<(), Error> {
-        let regs = T::regs();
+    move || Ok(())
-        let isr = regs.isr().read();
+}
 
-        if isr.tcr() || isr.tc() {
+pub unsafe fn on_interrupt<T: Instance>() {
-            T::state().waker.wake();
+    let regs = T::regs();
-        }
+    let isr = regs.isr().read();
-        // The flag can only be cleared by writting to nbytes, we won't do that here, so disable
+
-        // the interrupt
+    if isr.tcr() || isr.tc() {
-        critical_section::with(|_| {
+        T::state().waker.wake();
-            regs.cr1().modify(|w| w.set_tcie(false));
-        });
     }
+    // The flag can only be cleared by writting to nbytes, we won't do that here, so disable
+    // the interrupt
+    critical_section::with(|_| {
+        regs.cr1().modify(|w| w.set_tcie(false));
+    });
 }
 
 #[non_exhaustive]
@@ -65,18 +68,6 @@ impl Default for Config {
     }
 }
 
-pub struct State {
-    waker: AtomicWaker,
-}
-
-impl State {
-    pub(crate) const fn new() -> Self {
-        Self {
-            waker: AtomicWaker::new(),
-        }
-    }
-}
-
 pub struct I2c<'d, T: Instance, TXDMA = NoDma, RXDMA = NoDma> {
     _peri: PeripheralRef<'d, T>,
     #[allow(dead_code)]
@@ -92,7 +83,9 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         peri: impl Peripheral<P = T> + 'd,
         scl: impl Peripheral<P = impl SclPin<T>> + 'd,
         sda: impl Peripheral<P = impl SdaPin<T>> + 'd,
-        _irq: impl interrupt::typelevel::Binding<T::Interrupt, InterruptHandler<T>> + 'd,
+        _irq: impl interrupt::typelevel::Binding<T::EventInterrupt, EventInterruptHandler<T>>
+            + interrupt::typelevel::Binding<T::ErrorInterrupt, ErrorInterruptHandler<T>>
+            + 'd,
         tx_dma: impl Peripheral<P = TXDMA> + 'd,
         rx_dma: impl Peripheral<P = RXDMA> + 'd,
         freq: Hertz,
@@ -138,8 +131,8 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
             reg.set_pe(true);
         });
 
-        T::Interrupt::unpend();
+        unsafe { T::EventInterrupt::enable() };
-        unsafe { T::Interrupt::enable() };
+        unsafe { T::ErrorInterrupt::enable() };
 
         Self {
             _peri: peri,
@@ -260,21 +253,12 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
     }
 
     fn flush_txdr(&self) {
-        //if $i2c.isr.read().txis().bit_is_set() {
-        //$i2c.txdr.write(|w| w.txdata().bits(0));
-        //}
-
         if T::regs().isr().read().txis() {
             T::regs().txdr().write(|w| w.set_txdata(0));
         }
         if !T::regs().isr().read().txe() {
             T::regs().isr().modify(|w| w.set_txe(true))
         }
-
-        // If TXDR is not flagged as empty, write 1 to flush it
-        //if $i2c.isr.read().txe().is_not_empty() {
-        //$i2c.isr.write(|w| w.txe().set_bit());
-        //}
     }
 
     fn wait_txe(&self, check_timeout: impl Fn() -> Result<(), Error>) -> Result<(), Error> {
@@ -437,7 +421,6 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         result
     }
 
-    #[cfg(feature = "time")]
     async fn write_dma_internal(
         &mut self,
         address: u8,
@@ -528,7 +511,6 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         Ok(())
     }
 
-    #[cfg(feature = "time")]
     async fn read_dma_internal(
         &mut self,
         address: u8,
@@ -610,42 +592,38 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
 
     // =========================
     //  Async public API
-
     #[cfg(feature = "time")]
     pub async fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Error>
-    where
-        TXDMA: crate::i2c::TxDma<T>,
-    {
-        self.write_timeout(address, write, self.timeout).await
-    }
-
-    #[cfg(feature = "time")]
-    pub async fn write_timeout(&mut self, address: u8, write: &[u8], timeout: Duration) -> Result<(), Error>
     where
         TXDMA: crate::i2c::TxDma<T>,
     {
         if write.is_empty() {
-            self.write_internal(address, write, true, timeout_fn(timeout))
+            self.write_internal(address, write, true, timeout_fn(self.timeout))
         } else {
             embassy_time::with_timeout(
-                timeout,
+                self.timeout,
-                self.write_dma_internal(address, write, true, true, timeout_fn(timeout)),
+                self.write_dma_internal(address, write, true, true, timeout_fn(self.timeout)),
             )
             .await
             .unwrap_or(Err(Error::Timeout))
         }
     }
 
-    #[cfg(feature = "time")]
+    #[cfg(not(feature = "time"))]
-    pub async fn write_vectored(&mut self, address: u8, write: &[&[u8]]) -> Result<(), Error>
+    pub async fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Error>
     where
         TXDMA: crate::i2c::TxDma<T>,
     {
-        self.write_vectored_timeout(address, write, self.timeout).await
+        if write.is_empty() {
+            self.write_internal(address, write, true, no_timeout_fn())
+        } else {
+            self.write_dma_internal(address, write, true, true, no_timeout_fn())
+                .await
+        }
     }
 
     #[cfg(feature = "time")]
-    pub async fn write_vectored_timeout(&mut self, address: u8, write: &[&[u8]], timeout: Duration) -> Result<(), Error>
+    pub async fn write_vectored(&mut self, address: u8, write: &[&[u8]]) -> Result<(), Error>
     where
         TXDMA: crate::i2c::TxDma<T>,
     {
@@ -661,8 +639,8 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
             let is_last = next.is_none();
 
             embassy_time::with_timeout(
-                timeout,
+                self.timeout,
-                self.write_dma_internal(address, c, first, is_last, timeout_fn(timeout)),
+                self.write_dma_internal(address, c, first, is_last, timeout_fn(self.timeout)),
             )
             .await
             .unwrap_or(Err(Error::Timeout))?;
@@ -672,66 +650,79 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         Ok(())
     }
 
+    #[cfg(not(feature = "time"))]
+    pub async fn write_vectored(&mut self, address: u8, write: &[&[u8]]) -> Result<(), Error>
+    where
+        TXDMA: crate::i2c::TxDma<T>,
+    {
+        if write.is_empty() {
+            return Err(Error::ZeroLengthTransfer);
+        }
+        let mut iter = write.iter();
+
+        let mut first = true;
+        let mut current = iter.next();
+        while let Some(c) = current {
+            let next = iter.next();
+            let is_last = next.is_none();
+
+            self.write_dma_internal(address, c, first, is_last, no_timeout_fn())
+                .await?;
+            first = false;
+            current = next;
+        }
+        Ok(())
+    }
+
     #[cfg(feature = "time")]
     pub async fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Error>
     where
         RXDMA: crate::i2c::RxDma<T>,
     {
-        self.read_timeout(address, buffer, self.timeout).await
+        if buffer.is_empty() {
+            self.read_internal(address, buffer, false, timeout_fn(self.timeout))
+        } else {
+            embassy_time::with_timeout(
+                self.timeout,
+                self.read_dma_internal(address, buffer, false, timeout_fn(self.timeout)),
+            )
+            .await
+            .unwrap_or(Err(Error::Timeout))
+        }
     }
 
-    #[cfg(feature = "time")]
+    #[cfg(not(feature = "time"))]
-    pub async fn read_timeout(&mut self, address: u8, buffer: &mut [u8], timeout: Duration) -> Result<(), Error>
+    pub async fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Error>
     where
         RXDMA: crate::i2c::RxDma<T>,
     {
         if buffer.is_empty() {
-            self.read_internal(address, buffer, false, timeout_fn(timeout))
+            self.read_internal(address, buffer, false, no_timeout_fn())
         } else {
-            embassy_time::with_timeout(
+            self.read_dma_internal(address, buffer, false, no_timeout_fn()).await
-                timeout,
-                self.read_dma_internal(address, buffer, false, timeout_fn(timeout)),
-            )
-            .await
-            .unwrap_or(Err(Error::Timeout))
         }
     }
 
     #[cfg(feature = "time")]
     pub async fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Error>
-    where
-        TXDMA: super::TxDma<T>,
-        RXDMA: super::RxDma<T>,
-    {
-        self.write_read_timeout(address, write, read, self.timeout).await
-    }
-
-    #[cfg(feature = "time")]
-    pub async fn write_read_timeout(
-        &mut self,
-        address: u8,
-        write: &[u8],
-        read: &mut [u8],
-        timeout: Duration,
-    ) -> Result<(), Error>
     where
         TXDMA: super::TxDma<T>,
         RXDMA: super::RxDma<T>,
     {
         let start_instant = Instant::now();
-        let check_timeout = timeout_fn(timeout);
+        let check_timeout = timeout_fn(self.timeout);
         if write.is_empty() {
             self.write_internal(address, write, false, &check_timeout)?;
         } else {
             embassy_time::with_timeout(
-                timeout,
+                self.timeout,
                 self.write_dma_internal(address, write, true, true, &check_timeout),
             )
             .await
             .unwrap_or(Err(Error::Timeout))?;
         }
 
-        let time_left_until_timeout = timeout - Instant::now().duration_since(start_instant);
+        let time_left_until_timeout = self.timeout - Instant::now().duration_since(start_instant);
 
         if read.is_empty() {
             self.read_internal(address, read, true, &check_timeout)?;
@@ -747,6 +738,28 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         Ok(())
     }
 
+    #[cfg(not(feature = "time"))]
+    pub async fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Error>
+    where
+        TXDMA: super::TxDma<T>,
+        RXDMA: super::RxDma<T>,
+    {
+        let no_timeout = no_timeout_fn();
+        if write.is_empty() {
+            self.write_internal(address, write, false, &no_timeout)?;
+        } else {
+            self.write_dma_internal(address, write, true, true, &no_timeout).await?;
+        }
+
+        if read.is_empty() {
+            self.read_internal(address, read, true, &no_timeout)?;
+        } else {
+            self.read_dma_internal(address, read, true, &no_timeout).await?;
+        }
+
+        Ok(())
+    }
+
     // =========================
     //  Blocking public API
 
@@ -955,35 +968,6 @@ impl<'d, T: Instance, TXDMA, RXDMA> Drop for I2c<'d, T, TXDMA, RXDMA> {
     }
 }
 
-#[cfg(feature = "time")]
-mod eh02 {
-    use super::*;
-
-    impl<'d, T: Instance> embedded_hal_02::blocking::i2c::Read for I2c<'d, T> {
-        type Error = Error;
-
-        fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Self::Error> {
-            self.blocking_read(address, buffer)
-        }
-    }
-
-    impl<'d, T: Instance> embedded_hal_02::blocking::i2c::Write for I2c<'d, T> {
-        type Error = Error;
-
-        fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Self::Error> {
-            self.blocking_write(address, write)
-        }
-    }
-
-    impl<'d, T: Instance> embedded_hal_02::blocking::i2c::WriteRead for I2c<'d, T> {
-        type Error = Error;
-
-        fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
-            self.blocking_write_read(address, write, read)
-        }
-    }
-}
-
 /// I2C Stop Configuration
 ///
 /// Peripheral options for generating the STOP condition
@@ -1108,83 +1092,6 @@ impl Timings {
     }
 }
 
-#[cfg(feature = "unstable-traits")]
-mod eh1 {
-    use super::*;
-
-    impl embedded_hal_1::i2c::Error for Error {
-        fn kind(&self) -> embedded_hal_1::i2c::ErrorKind {
-            match *self {
-                Self::Bus => embedded_hal_1::i2c::ErrorKind::Bus,
-                Self::Arbitration => embedded_hal_1::i2c::ErrorKind::ArbitrationLoss,
-                Self::Nack => {
-                    embedded_hal_1::i2c::ErrorKind::NoAcknowledge(embedded_hal_1::i2c::NoAcknowledgeSource::Unknown)
-                }
-                Self::Timeout => embedded_hal_1::i2c::ErrorKind::Other,
-                Self::Crc => embedded_hal_1::i2c::ErrorKind::Other,
-                Self::Overrun => embedded_hal_1::i2c::ErrorKind::Overrun,
-                Self::ZeroLengthTransfer => embedded_hal_1::i2c::ErrorKind::Other,
-            }
-        }
-    }
-
-    impl<'d, T: Instance, TXDMA, RXDMA> embedded_hal_1::i2c::ErrorType for I2c<'d, T, TXDMA, RXDMA> {
-        type Error = Error;
-    }
-
-    impl<'d, T: Instance> embedded_hal_1::i2c::I2c for I2c<'d, T, NoDma, NoDma> {
-        fn read(&mut self, address: u8, read: &mut [u8]) -> Result<(), Self::Error> {
-            self.blocking_read(address, read)
-        }
-
-        fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Self::Error> {
-            self.blocking_write(address, write)
-        }
-
-        fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
-            self.blocking_write_read(address, write, read)
-        }
-
-        fn transaction(
-            &mut self,
-            _address: u8,
-            _operations: &mut [embedded_hal_1::i2c::Operation<'_>],
-        ) -> Result<(), Self::Error> {
-            todo!();
-        }
-    }
-}
-
-#[cfg(all(feature = "unstable-traits", feature = "nightly", feature = "time"))]
-mod eha {
-    use super::super::{RxDma, TxDma};
-    use super::*;
-
-    impl<'d, T: Instance, TXDMA: TxDma<T>, RXDMA: RxDma<T>> embedded_hal_async::i2c::I2c for I2c<'d, T, TXDMA, RXDMA> {
-        async fn read(&mut self, address: u8, read: &mut [u8]) -> Result<(), Self::Error> {
-            self.read(address, read).await
-        }
-
-        async fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Self::Error> {
-            self.write(address, write).await
-        }
-
-        async fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
-            self.write_read(address, write, read).await
-        }
-
-        async fn transaction(
-            &mut self,
-            address: u8,
-            operations: &mut [embedded_hal_1::i2c::Operation<'_>],
-        ) -> Result<(), Self::Error> {
-            let _ = address;
-            let _ = operations;
-            todo!()
-        }
-    }
-}
-
 impl<'d, T: Instance> SetConfig for I2c<'d, T> {
     type Config = Hertz;
     type ConfigError = ();
@@ -1201,15 +1108,3 @@ impl<'d, T: Instance> SetConfig for I2c<'d, T> {
         Ok(())
     }
 }
-
-#[cfg(feature = "time")]
-fn timeout_fn(timeout: Duration) -> impl Fn() -> Result<(), Error> {
-    let deadline = Instant::now() + timeout;
-    move || {
-        if Instant::now() > deadline {
-            Err(Error::Timeout)
-        } else {
-            Ok(())
-        }
-    }
-}

embassy-time/Cargo.toml

@@ -258,4 +258,4 @@ wasm-timer = { version = "0.2.5", optional = true }
 [dev-dependencies]
 serial_test = "0.9"
 critical-section = { version = "1.1", features = ["std"] }
-embassy-executor = { version = "0.3.1", path = "../embassy-executor", features = ["nightly"] }
+embassy-executor = { version = "0.3.3", path = "../embassy-executor", features = ["nightly"] }

examples/boot/application/nrf/Cargo.toml

@@ -6,7 +6,7 @@ license = "MIT OR Apache-2.0"
 
 [dependencies]
 embassy-sync = { version = "0.4.0", path = "../../../../embassy-sync" }
-embassy-executor = { version = "0.3.1", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers", "arch-cortex-m", "executor-thread"] }
+embassy-executor = { version = "0.3.3", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers", "arch-cortex-m", "executor-thread"] }
 embassy-time = { version = "0.1.5", path = "../../../../embassy-time", features = ["nightly"] }
 embassy-nrf = { version = "0.1.0", path = "../../../../embassy-nrf", features = ["time-driver-rtc1", "gpiote", "nightly"] }
 embassy-boot = { version = "0.1.0", path = "../../../../embassy-boot/boot", features = ["nightly"] }

examples/boot/application/rp/Cargo.toml

@@ -6,7 +6,7 @@ license = "MIT OR Apache-2.0"
 
 [dependencies]
 embassy-sync = { version = "0.4.0", path = "../../../../embassy-sync" }
-embassy-executor = { version = "0.3.1", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers", "arch-cortex-m", "executor-thread"] }
+embassy-executor = { version = "0.3.3", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers", "arch-cortex-m", "executor-thread"] }
 embassy-time = { version = "0.1.5", path = "../../../../embassy-time", features = ["nightly"] }
 embassy-rp = { version = "0.1.0", path = "../../../../embassy-rp", features = ["time-driver", "unstable-traits", "nightly"] }
 embassy-boot-rp = { version = "0.1.0", path = "../../../../embassy-boot/rp", features = ["nightly"] }

examples/boot/application/stm32f3/Cargo.toml

@@ -6,7 +6,7 @@ license = "MIT OR Apache-2.0"
 
 [dependencies]
 embassy-sync = { version = "0.4.0", path = "../../../../embassy-sync" }
-embassy-executor = { version = "0.3.1", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../../../embassy-time", features = ["nightly", "tick-hz-32_768"] }
 embassy-stm32 = { version = "0.1.0", path = "../../../../embassy-stm32", features = ["unstable-traits", "nightly", "stm32f303re", "time-driver-any", "exti"]  }
 embassy-boot-stm32 = { version = "0.1.0", path = "../../../../embassy-boot/stm32", features = ["nightly"] }

examples/boot/application/stm32f7/Cargo.toml

@@ -6,7 +6,7 @@ license = "MIT OR Apache-2.0"
 
 [dependencies]
 embassy-sync = { version = "0.4.0", path = "../../../../embassy-sync" }
-embassy-executor = { version = "0.3.1", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../../../embassy-time", features = ["nightly", "tick-hz-32_768"] }
 embassy-stm32 = { version = "0.1.0", path = "../../../../embassy-stm32", features = ["unstable-traits", "nightly", "stm32f767zi", "time-driver-any", "exti"]  }
 embassy-boot-stm32 = { version = "0.1.0", path = "../../../../embassy-boot/stm32", features = ["nightly"] }

examples/boot/application/stm32h7/Cargo.toml

@@ -6,7 +6,7 @@ license = "MIT OR Apache-2.0"
 
 [dependencies]
 embassy-sync = { version = "0.4.0", path = "../../../../embassy-sync" }
-embassy-executor = { version = "0.3.1", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../../../embassy-time", features = ["nightly", "tick-hz-32_768"] }
 embassy-stm32 = { version = "0.1.0", path = "../../../../embassy-stm32", features = ["unstable-traits", "nightly", "stm32h743zi", "time-driver-any", "exti"]  }
 embassy-boot-stm32 = { version = "0.1.0", path = "../../../../embassy-boot/stm32", features = ["nightly"] }

examples/boot/application/stm32l0/Cargo.toml

@@ -6,7 +6,7 @@ license = "MIT OR Apache-2.0"
 
 [dependencies]
 embassy-sync = { version = "0.4.0", path = "../../../../embassy-sync" }
-embassy-executor = { version = "0.3.1", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../../../embassy-time", features = ["nightly", "tick-hz-32_768"] }
 embassy-stm32 = { version = "0.1.0", path = "../../../../embassy-stm32", features = ["unstable-traits", "nightly", "stm32l072cz", "time-driver-any", "exti", "memory-x"]  }
 embassy-boot-stm32 = { version = "0.1.0", path = "../../../../embassy-boot/stm32", features = ["nightly"] }

examples/boot/application/stm32l1/Cargo.toml

@@ -6,7 +6,7 @@ license = "MIT OR Apache-2.0"
 
 [dependencies]
 embassy-sync = { version = "0.4.0", path = "../../../../embassy-sync" }
-embassy-executor = { version = "0.3.1", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../../../embassy-time", features = ["nightly", "tick-hz-32_768"] }
 embassy-stm32 = { version = "0.1.0", path = "../../../../embassy-stm32", features = ["unstable-traits", "nightly", "stm32l151cb-a", "time-driver-any", "exti"]  }
 embassy-boot-stm32 = { version = "0.1.0", path = "../../../../embassy-boot/stm32", features = ["nightly"] }

examples/boot/application/stm32l4/Cargo.toml

@@ -6,7 +6,7 @@ license = "MIT OR Apache-2.0"
 
 [dependencies]
 embassy-sync = { version = "0.4.0", path = "../../../../embassy-sync" }
-embassy-executor = { version = "0.3.1", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../../../embassy-time", features = ["nightly", "tick-hz-32_768"] }
 embassy-stm32 = { version = "0.1.0", path = "../../../../embassy-stm32", features = ["unstable-traits", "nightly", "stm32l475vg", "time-driver-any", "exti"]  }
 embassy-boot-stm32 = { version = "0.1.0", path = "../../../../embassy-boot/stm32", features = ["nightly"] }

examples/boot/application/stm32wl/Cargo.toml

@@ -6,7 +6,7 @@ license = "MIT OR Apache-2.0"
 
 [dependencies]
 embassy-sync = { version = "0.4.0", path = "../../../../embassy-sync" }
-embassy-executor = { version = "0.3.1", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "nightly", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../../../embassy-time", features = ["nightly", "tick-hz-32_768"] }
 embassy-stm32 = { version = "0.1.0", path = "../../../../embassy-stm32", features = ["unstable-traits", "nightly", "stm32wl55jc-cm4", "time-driver-any", "exti"]  }
 embassy-boot-stm32 = { version = "0.1.0", path = "../../../../embassy-boot/stm32", features = ["nightly"] }

examples/nrf-rtos-trace/Cargo.toml

@@ -17,7 +17,7 @@ log = [
 
 [dependencies]
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync" }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "rtos-trace", "rtos-trace-interrupt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "rtos-trace", "rtos-trace-interrupt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time" }
 embassy-nrf = { version = "0.1.0", path = "../../embassy-nrf", features = ["nrf52840", "time-driver-rtc1", "gpiote", "unstable-pac"] }
 

examples/nrf52840/Cargo.toml

@@ -30,7 +30,7 @@ nightly = [
 [dependencies]
 embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "executor-interrupt", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "executor-interrupt", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime"] }
 embassy-nrf = { version = "0.1.0", path = "../../embassy-nrf", features = ["defmt", "nrf52840", "time-driver-rtc1", "gpiote", "unstable-pac", "time"] }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "tcp", "dhcpv4", "medium-ethernet"], optional = true }

examples/nrf5340/Cargo.toml

@@ -9,7 +9,7 @@ embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = [
     "defmt",
 ] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", 
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", 
     "nightly",
     "defmt",
     "integrated-timers",

examples/rp/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 [dependencies]
 embassy-embedded-hal = { version = "0.1.0", path = "../../embassy-embedded-hal", features = ["defmt"] }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "executor-interrupt", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "executor-interrupt", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["nightly", "unstable-traits", "defmt", "defmt-timestamp-uptime"] }
 embassy-rp = { version = "0.1.0", path = "../../embassy-rp", features = ["defmt", "unstable-traits", "nightly", "unstable-pac", "time-driver", "critical-section-impl"] }
 embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"] }

examples/std/Cargo.toml

@@ -6,7 +6,7 @@ license = "MIT OR Apache-2.0"
 
 [dependencies]
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["log"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["arch-std", "executor-thread", "log", "nightly", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["arch-std", "executor-thread", "log", "nightly", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["log", "std", "nightly"] }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features=[ "std", "nightly", "log", "medium-ethernet", "medium-ip", "tcp", "udp", "dns", "dhcpv4", "proto-ipv6"] }
 embassy-net-tuntap = { version = "0.1.0", path = "../../embassy-net-tuntap" }

examples/stm32c0/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 # Change stm32c031c6 to your chip name, if necessary.
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "time-driver-any", "stm32c031c6", "memory-x", "unstable-pac", "exti"]  }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 
 defmt = "0.3"

examples/stm32f0/Cargo.toml

@@ -15,7 +15,7 @@ defmt = "0.3"
 defmt-rtt = "0.4"
 panic-probe = "0.3"
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "executor-interrupt", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "executor-interrupt", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 static_cell = { version = "2", features = ["nightly"]}
 portable-atomic = { version = "1.5", features = ["unsafe-assume-single-core"] }

examples/stm32f1/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 # Change stm32f103c8 to your chip name, if necessary.
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "stm32f103c8", "unstable-pac", "memory-x", "time-driver-any", "unstable-traits" ]  }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"] }
 embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }

examples/stm32f2/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 # Change stm32f207zg to your chip name, if necessary.
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "stm32f207zg", "unstable-pac", "memory-x", "time-driver-any", "exti"]  }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 
 defmt = "0.3"

examples/stm32f3/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 # Change stm32f303ze to your chip name, if necessary.
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "stm32f303ze", "unstable-pac", "memory-x", "time-driver-any", "exti"]  }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "executor-interrupt", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "executor-interrupt", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"] }
 embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }

examples/stm32f334/Cargo.toml

@@ -6,7 +6,7 @@ license = "MIT OR Apache-2.0"
 
 [dependencies]
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "executor-interrupt", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "executor-interrupt", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.0", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "stm32f334r8", "unstable-pac", "memory-x", "time-driver-any", "exti"]  }
 embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"] }

examples/stm32f4/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 # Change stm32f429zi to your chip name, if necessary.
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "unstable-traits", "defmt", "stm32f429zi", "unstable-pac", "memory-x", "time-driver-any", "exti", "embedded-sdmmc", "chrono"]  }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "executor-interrupt", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "executor-interrupt", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "unstable-traits", "tick-hz-32_768"] }
 embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt" ] }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "tcp", "dhcpv4", "medium-ethernet", "nightly"] }

examples/stm32f4/src/bin/i2c.rs

@@ -14,7 +14,8 @@ const ADDRESS: u8 = 0x5F;
 const WHOAMI: u8 = 0x0F;
 
 bind_interrupts!(struct Irqs {
-    I2C2_EV => i2c::InterruptHandler<peripherals::I2C2>;
+    I2C2_EV => i2c::EventInterruptHandler<peripherals::I2C2>;
+    I2C2_ER => i2c::ErrorInterruptHandler<peripherals::I2C2>;
 });
 
 #[embassy_executor::main]

examples/stm32f7/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 # Change stm32f767zi to your chip name, if necessary.
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "stm32f767zi", "memory-x", "unstable-pac", "time-driver-any", "exti"]  }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "nightly", "tcp", "dhcpv4", "medium-ethernet"] }
 embedded-io-async = { version = "0.6.0" }

examples/stm32g0/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 # Change stm32g071rb to your chip name, if necessary.
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "time-driver-any", "stm32g071rb", "memory-x", "unstable-pac", "exti"]  }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 
 defmt = "0.3"

examples/stm32g4/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 # Change stm32g491re to your chip name, if necessary.
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "time-driver-any", "stm32g491re", "memory-x", "unstable-pac", "exti"]  }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"] }
 embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }

examples/stm32h5/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 # Change stm32h563zi to your chip name, if necessary.
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "stm32h563zi", "memory-x", "time-driver-any", "exti", "unstable-pac", "unstable-traits"] }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "unstable-traits", "tick-hz-32_768"] }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "nightly", "tcp", "dhcpv4", "medium-ethernet", "proto-ipv6"] }
 embedded-io-async = { version = "0.6.0" }

examples/stm32h5/src/bin/i2c.rs

@@ -13,7 +13,8 @@ const ADDRESS: u8 = 0x5F;
 const WHOAMI: u8 = 0x0F;
 
 bind_interrupts!(struct Irqs {
-    I2C2_EV => i2c::InterruptHandler<peripherals::I2C2>;
+    I2C2_EV => i2c::EventInterruptHandler<peripherals::I2C2>;
+    I2C2_ER => i2c::ErrorInterruptHandler<peripherals::I2C2>;
 });
 
 #[embassy_executor::main]

examples/stm32h7/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 # Change stm32h743bi to your chip name, if necessary.
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "stm32h743bi", "time-driver-any", "exti", "memory-x", "unstable-pac", "unstable-traits", "chrono"] }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "unstable-traits", "tick-hz-32_768"] }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "nightly", "tcp", "dhcpv4", "medium-ethernet", "proto-ipv6", "dns"] }
 embedded-io-async = { version = "0.6.0" }

examples/stm32h7/src/bin/camera.rs

@@ -19,7 +19,8 @@ const HEIGHT: usize = 100;
 static mut FRAME: [u32; WIDTH * HEIGHT / 2] = [0u32; WIDTH * HEIGHT / 2];
 
 bind_interrupts!(struct Irqs {
-    I2C1_EV => i2c::InterruptHandler<peripherals::I2C1>;
+    I2C1_EV => i2c::EventInterruptHandler<peripherals::I2C1>;
+    I2C1_ER => i2c::ErrorInterruptHandler<peripherals::I2C1>;
     DCMI => dcmi::InterruptHandler<peripherals::DCMI>;
 });
 

examples/stm32h7/src/bin/i2c.rs

@@ -13,7 +13,8 @@ const ADDRESS: u8 = 0x5F;
 const WHOAMI: u8 = 0x0F;
 
 bind_interrupts!(struct Irqs {
-    I2C2_EV => i2c::InterruptHandler<peripherals::I2C2>;
+    I2C2_EV => i2c::EventInterruptHandler<peripherals::I2C2>;
+    I2C2_ER => i2c::ErrorInterruptHandler<peripherals::I2C2>;
 });
 
 #[embassy_executor::main]

examples/stm32l0/Cargo.toml

@@ -13,7 +13,7 @@ nightly = ["embassy-stm32/nightly", "embassy-time/nightly", "embassy-time/unstab
 # Change stm32l072cz to your chip name, if necessary.
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["defmt", "stm32l072cz", "time-driver-any", "exti", "unstable-traits", "memory-x"]  }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 embassy-lora = { version = "0.1.0", path = "../../embassy-lora", features = ["time", "defmt"], optional = true }
 lora-phy = { version = "2", optional = true }

examples/stm32l1/Cargo.toml

@@ -6,7 +6,7 @@ license = "MIT OR Apache-2.0"
 
 [dependencies]
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "stm32l151cb-a", "time-driver-any", "memory-x"]  }
 

examples/stm32l4/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 # Change stm32l4s5vi to your chip name, if necessary.
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "unstable-pac", "stm32l4s5qi", "memory-x", "time-driver-any", "exti", "unstable-traits", "chrono"]  }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768", "unstable-traits", "nightly"] }
 embassy-embedded-hal = { version = "0.1.0", path = "../../embassy-embedded-hal" }
 embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"] }

examples/stm32l4/src/bin/i2c.rs

@@ -14,7 +14,8 @@ const ADDRESS: u8 = 0x5F;
 const WHOAMI: u8 = 0x0F;
 
 bind_interrupts!(struct Irqs {
-    I2C2_EV => i2c::InterruptHandler<peripherals::I2C2>;
+    I2C2_EV => i2c::EventInterruptHandler<peripherals::I2C2>;
+    I2C2_ER => i2c::ErrorInterruptHandler<peripherals::I2C2>;
 });
 
 #[embassy_executor::main]

examples/stm32l4/src/bin/i2c_blocking_async.rs

@@ -16,7 +16,8 @@ const ADDRESS: u8 = 0x5F;
 const WHOAMI: u8 = 0x0F;
 
 bind_interrupts!(struct Irqs {
-    I2C2_EV => i2c::InterruptHandler<peripherals::I2C2>;
+    I2C2_EV => i2c::EventInterruptHandler<peripherals::I2C2>;
+    I2C2_ER => i2c::ErrorInterruptHandler<peripherals::I2C2>;
 });
 
 #[embassy_executor::main]

examples/stm32l4/src/bin/i2c_dma.rs

@@ -13,7 +13,8 @@ const ADDRESS: u8 = 0x5F;
 const WHOAMI: u8 = 0x0F;
 
 bind_interrupts!(struct Irqs {
-    I2C2_EV => i2c::InterruptHandler<peripherals::I2C2>;
+    I2C2_EV => i2c::EventInterruptHandler<peripherals::I2C2>;
+    I2C2_ER => i2c::ErrorInterruptHandler<peripherals::I2C2>;
 });
 
 #[embassy_executor::main]

examples/stm32l4/src/bin/spe_adin1110_http_server.rs

@@ -40,7 +40,8 @@ use static_cell::make_static;
 use {embassy_stm32 as hal, panic_probe as _};
 
 bind_interrupts!(struct Irqs {
-    I2C3_EV => i2c::InterruptHandler<peripherals::I2C3>;
+    I2C3_EV => i2c::EventInterruptHandler<peripherals::I2C3>;
+    I2C3_ER => i2c::ErrorInterruptHandler<peripherals::I2C3>;
     RNG => rng::InterruptHandler<peripherals::RNG>;
 });
 

examples/stm32l5/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 # Change stm32l552ze to your chip name, if necessary.
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "unstable-pac", "stm32l552ze", "time-driver-any", "exti", "unstable-traits", "memory-x"]  }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"] }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "nightly", "tcp", "dhcpv4", "medium-ethernet"] }

examples/stm32u5/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 # Change stm32u585ai to your chip name, if necessary.
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "unstable-pac", "stm32u585ai", "time-driver-any", "memory-x" ]  }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"] }
 

examples/stm32wb/Cargo.toml

@@ -9,7 +9,7 @@ license = "MIT OR Apache-2.0"
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "stm32wb55rg", "time-driver-any", "memory-x", "exti"]  }
 embassy-stm32-wpan = { version = "0.1.0", path = "../../embassy-stm32-wpan", features = ["defmt", "stm32wb55rg"] }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "udp", "proto-ipv6", "medium-ieee802154", "nightly"], optional=true }
 

examples/stm32wba/Cargo.toml

@@ -7,7 +7,7 @@ license = "MIT OR Apache-2.0"
 [dependencies]
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "stm32wba52cg", "time-driver-any", "memory-x", "exti"]  }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "udp", "proto-ipv6", "medium-ieee802154", "nightly"], optional=true }
 

examples/stm32wl/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 # Change stm32wl55jc-cm4 to your chip name, if necessary.
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "unstable-traits", "defmt", "stm32wl55jc-cm4", "time-driver-any", "memory-x", "unstable-pac", "exti", "chrono"] }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["nightly", "unstable-traits", "defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 embassy-embedded-hal = { version = "0.1.0", path = "../../embassy-embedded-hal" }
 embassy-lora = { version = "0.1.0", path = "../../embassy-lora", features = ["stm32wl", "time", "defmt"] }

examples/wasm/Cargo.toml

@@ -9,7 +9,7 @@ crate-type = ["cdylib"]
 
 [dependencies]
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["log"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["arch-wasm", "executor-thread", "log", "nightly", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["arch-wasm", "executor-thread", "log", "nightly", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["log", "wasm", "nightly"] }
 
 wasm-logger = "0.2.0"

tests/nrf/Cargo.toml

@@ -9,10 +9,10 @@ teleprobe-meta = "1"
 
 embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt", "nightly"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "defmt", "nightly", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "defmt", "nightly", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "nightly", "unstable-traits", "defmt-timestamp-uptime"] }
 embassy-nrf = { version = "0.1.0", path = "../../embassy-nrf", features = ["defmt", "nightly", "unstable-traits", "nrf52840", "time-driver-rtc1", "gpiote", "unstable-pac"] }
-embedded-io-async = { version = "0.6.0" }
+embedded-io-async = { version = "0.6.0", features = ["defmt-03"] }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "tcp", "dhcpv4", "medium-ethernet", "nightly"] }
 embassy-net-esp-hosted = { version = "0.1.0", path = "../../embassy-net-esp-hosted", features = ["defmt"] }
 embassy-net-enc28j60 = { version = "0.1.0", path = "../../embassy-net-enc28j60", features = ["defmt"] }

tests/nrf/src/bin/buffered_uart_full.rs

@@ -0,0 +1,72 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+teleprobe_meta::target!(b"nrf52840-dk");
+
+use defmt::{assert_eq, *};
+use embassy_executor::Spawner;
+use embassy_nrf::buffered_uarte::{self, BufferedUarte};
+use embassy_nrf::{bind_interrupts, peripherals, uarte};
+use embedded_io_async::{Read, Write};
+use {defmt_rtt as _, panic_probe as _};
+
+bind_interrupts!(struct Irqs {
+    UARTE0_UART0 => buffered_uarte::InterruptHandler<peripherals::UARTE0>;
+});
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_nrf::init(Default::default());
+    let mut config = uarte::Config::default();
+    config.parity = uarte::Parity::EXCLUDED;
+    config.baudrate = uarte::Baudrate::BAUD1M;
+
+    let mut tx_buffer = [0u8; 1024];
+    let mut rx_buffer = [0u8; 1024];
+
+    let mut u = BufferedUarte::new(
+        p.UARTE0,
+        p.TIMER0,
+        p.PPI_CH0,
+        p.PPI_CH1,
+        p.PPI_GROUP0,
+        Irqs,
+        p.P1_03,
+        p.P1_02,
+        config.clone(),
+        &mut rx_buffer,
+        &mut tx_buffer,
+    );
+
+    info!("uarte initialized!");
+
+    let (mut rx, mut tx) = u.split();
+
+    let mut buf = [0; 1024];
+    for (j, b) in buf.iter_mut().enumerate() {
+        *b = j as u8;
+    }
+
+    // Write 1024b. This causes the rx buffer to get exactly full.
+    unwrap!(tx.write_all(&buf).await);
+    unwrap!(tx.flush().await);
+
+    // Read those 1024b.
+    unwrap!(rx.read_exact(&mut buf).await);
+    for (j, b) in buf.iter().enumerate() {
+        assert_eq!(*b, j as u8);
+    }
+
+    // The buffer should now be unclogged. Write 1024b again.
+    unwrap!(tx.write_all(&buf).await);
+    unwrap!(tx.flush().await);
+
+    // Read should work again.
+    unwrap!(rx.read_exact(&mut buf).await);
+    for (j, b) in buf.iter().enumerate() {
+        assert_eq!(*b, j as u8);
+    }
+
+    info!("Test OK");
+    cortex_m::asm::bkpt();
+}

tests/riscv32/Cargo.toml

@@ -7,7 +7,7 @@ license = "MIT OR Apache-2.0"
 [dependencies]
 critical-section = { version = "1.1.1", features = ["restore-state-bool"] }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync" }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["arch-riscv32", "nightly", "executor-thread"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["arch-riscv32", "nightly", "executor-thread"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time" }
 embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }
 

tests/rp/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 teleprobe-meta = "1.1"
 
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "nightly", "unstable-traits"] }
 embassy-rp = { version = "0.1.0", path = "../../embassy-rp", features = ["nightly", "defmt", "unstable-pac", "unstable-traits", "time-driver", "critical-section-impl", "intrinsics", "rom-v2-intrinsics", "run-from-ram"]  }
 embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }

tests/stm32/Cargo.toml

@@ -48,7 +48,7 @@ cm0 = ["portable-atomic/unsafe-assume-single-core"]
 teleprobe-meta = "1"
 
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.1", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "tick-hz-131_072", "defmt-timestamp-uptime"] }
 embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["nightly", "defmt", "unstable-pac", "memory-x", "time-driver-any"]  }
 embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }