- Rename feature to `embedded-sdmmc`.
- Move embedded-sdmmc fork repo to the embassy-rs org.
- Remove unused features in the fork
- Fix impl in embassy-stm32
- Add to CI so it doesn't break again.
1161: WIP: Smoltcp socket config r=Dirbaio a=Czocher
This PR updates the smoltcp version to the newest master one as well as implements the feature specified in #1154 - to allow the dhcpv4 socket to be configured.
Currently it should be considered a WIP PR - requires testing.
`@Dirbaio` can you have a look and check if this is compatible with what we discussed on the matrix channel?
Co-authored-by: Paweł Jan Czochański <pawel@czochanski.pl>
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
1162: rp gpio: make pin_bank() inline r=Dirbaio a=mkj
This allows set_high() etc to be inlined, toggling pins should be much faster.
Co-authored-by: Matt Johnston <matt@ucc.asn.au>
1159: stm32 usb otg bug fixes r=Dirbaio a=chemicstry
This fixes a couple of usb otg bugs that surfaced with `usb_ethernet` example from nrf:
- Properly implemented `Endpoint::wait_enabled()`
- Return `EndpointError::Disabled` when neccessary in `Endpoint::write()`
Co-authored-by: chemicstry <chemicstry@gmail.com>
1160: Stop sampling when exiting the Saadc methods r=huntc a=huntc
Prior to this commit, the onDrop function was being dropped immediately and not on exiting the Saadc sampling methods.
A few other places have been corrected also.
Thanks to Peter Hansen for pointing out this issue.
Co-authored-by: huntc <huntchr@gmail.com>
1153: Documentation on verifying firmware r=lulf a=huntc
The documentation has been enhanced to describe the verification of firmware with the firmware updater. Examples have also been provided that describe how keys can be generated and how firmware can be signed.
Co-authored-by: huntc <huntchr@gmail.com>
The documentation has been enhanced to describe the verification of firmware with the firmware updater. Examples have also been provided that describe how keys can be generated and how firmware can be signed.
1142: More rp2040 BufferedUart fixes r=Dirbaio a=timokroeger
* Refactor init code
* Make it possible to drop RX without breaking TX (or vice versa)
* Correctly handle RX buffer full scenario
Co-authored-by: Timo Kröger <timokroeger93@gmail.com>
1147: Support codesigning in the firmware updater r=lulf a=huntc
This PR provides a method to verify that firmware has been SHA-512 hashed and signed with a private key given its public key. The implementation provides both [`ed25519-dalek`](https://github.com/dalek-cryptography/ed25519-dalek/blob/main/Cargo.toml) and [`salty`](https://github.com/ycrypto/salty) as the signature verifiers. Either of the `ed25519-dalek` and `ed25519-salty` features is required to enable the functionality from `embassy-boot`.
The `verify_and_mark_updated` method is used in place of `mark_updated` when signing is used via its feature. This avoids the accidental omission of validation where it has been declared as required at compile time. It also keeps the parity of calls at the same number to the previous situation.
The PR permits other types of signature verifiers in the future on the proviso that the [Signature trait](https://github.com/RustCrypto/traits/tree/master/signature) is supported.
Finally, I've updated the CI to include testing `embassy-boot`, which it was doing before. In addition, I've included a unit test for verification based on a `ed25519-dalek` documentation example. This tests both the `dalek` and `salty` implementations.
In terms of code size comparisons, `dalek` adds about 68KiB and `salty` adds about 20KiB. I'm using `salty` myself. I've also tested this out by signing my code with the OpenBSD `signify` utility and then verify it during firmware upload using `salty`.
Co-authored-by: huntc <huntchr@gmail.com>
This commit provides a method to verify that firmware has been signed with a private key given its public key. The implementation uses ed25519-dalek as the signature verifier. An "ed25519" feature is required to enable the functionality. When disabled (the default), calling the firmware updater's verify method will return a failure.
1145: STM32 USB OTG #2 r=Dirbaio a=chemicstry
This is a continuation of #799
The usb serial example is already working!
TODO:
- [x] Add critical sections to registers shared with IRQ
- [x] Fix `disable()`
- [x] ~Implement cable disconnect detection~ - postponed
- [x] Fix `endpoint_set_enabled()`
- [x] ~Endpoint `wait_enabled`~ USB OTG does not have enable delay (?)
- [x] HS internal and HS ULPI PHY - untested
Co-authored-by: chemicstry <chemicstry@gmail.com>
Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
1149: Add samples for nrf5340 r=lulf a=Tiwalun
Samples for the nrf5340, copied from the existing nrf samples.
Not sure if copying them is the best way of adding support, or using features in the existing samples would be better?
The code is mostly the same, with some different peripherals and pin mappings for the DK.
Co-authored-by: Dominik Boehi <dominik.boehi@gmail.com>
* Only clear interrupt flags that have fired (so that we do not lose any error flags)
* Enable RX interrupt when a read is requested, disable it when the RX buffer is full
* Rework TX interrupt handling: its "edge" triggered by a FIFO threshold
1141: feat: compile bootloader examples for nRF91 r=lulf a=lulf
* Add nRF91 as target in CI builds
* Add example linker scripts for nrf91
* Make less nRF52 assumptions example config
* Add llvm-tools-preview required for cargo objcopy example
Co-authored-by: Ulf Lilleengen <lulf@redhat.com>
1143: rp2040: add {tx,rx}-only constructors to UART r=Dirbaio a=pferreir
As discussed with `@henrik-alser` on Matrix. I also added an example, feel free to remove it if it's too much.
Co-authored-by: Pedro Ferreira <pedro@dete.st>
