stm32/build: deterministically generate data

stm32: fix low-power test

ci.sh

@@ -192,9 +192,13 @@ cargo batch  \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32g071rb --out-dir out/tests/stm32g071rb \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32c031c6 --out-dir out/tests/stm32c031c6 \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h755zi --out-dir out/tests/stm32h755zi \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h753zi --out-dir out/tests/stm32h753zi \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h7a3zi --out-dir out/tests/stm32h7a3zi \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32wb55rg --out-dir out/tests/stm32wb55rg \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32h563zi --out-dir out/tests/stm32h563zi \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32u585ai --out-dir out/tests/stm32u585ai \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32u5a5zj --out-dir out/tests/stm32u5a5zj \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32wba52cg --out-dir out/tests/stm32wba52cg \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32l073rz --out-dir out/tests/stm32l073rz \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32l152re --out-dir out/tests/stm32l152re \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32l4a6zg --out-dir out/tests/stm32l4a6zg \
@@ -213,8 +217,13 @@ cargo batch  \
 
 rm out/tests/stm32wb55rg/wpan_mac
 rm out/tests/stm32wb55rg/wpan_ble
+
+# unstable, I think it's running out of RAM?
 rm out/tests/stm32f207zg/eth
 
+# doesn't work, gives "noise error", no idea why. usart_dma does pass.
+rm out/tests/stm32u5a5zj/usart
+
 if [[ -z "${TELEPROBE_TOKEN-}" ]]; then
     echo No teleprobe token found, skipping running HIL tests
     exit

embassy-net-wiznet/src/lib.rs

@@ -1,14 +1,14 @@
-//! [`embassy-net`](https://crates.io/crates/embassy-net) driver for WIZnet ethernet chips.
 #![no_std]
 #![feature(async_fn_in_trait)]
+#![doc = include_str!("../README.md")]
 
 pub mod chip;
 mod device;
 
-use embassy_futures::select::{select, Either};
+use embassy_futures::select::{select3, Either3};
 use embassy_net_driver_channel as ch;
 use embassy_net_driver_channel::driver::LinkState;
-use embassy_time::Timer;
+use embassy_time::{Duration, Ticker, Timer};
 use embedded_hal::digital::OutputPin;
 use embedded_hal_async::digital::Wait;
 use embedded_hal_async::spi::SpiDevice;
@@ -49,32 +49,34 @@ pub struct Runner<'d, C: Chip, SPI: SpiDevice, INT: Wait, RST: OutputPin> {
 impl<'d, C: Chip, SPI: SpiDevice, INT: Wait, RST: OutputPin> Runner<'d, C, SPI, INT, RST> {
     pub async fn run(mut self) -> ! {
         let (state_chan, mut rx_chan, mut tx_chan) = self.ch.split();
+        let mut tick = Ticker::every(Duration::from_millis(500));
         loop {
-            if self.mac.is_link_up().await {
-                state_chan.set_link_state(LinkState::Up);
-                loop {
-                    match select(
-                        async {
-                            self.int.wait_for_low().await.ok();
-                            rx_chan.rx_buf().await
-                        },
-                        tx_chan.tx_buf(),
-                    )
-                    .await
-                    {
-                        Either::First(p) => {
-                            if let Ok(n) = self.mac.read_frame(p).await {
-                                rx_chan.rx_done(n);
-                            }
-                        }
-                        Either::Second(p) => {
-                            self.mac.write_frame(p).await.ok();
-                            tx_chan.tx_done();
-                        }
+            match select3(
+                async {
+                    self.int.wait_for_low().await.ok();
+                    rx_chan.rx_buf().await
+                },
+                tx_chan.tx_buf(),
+                tick.next(),
+            )
+            .await
+            {
+                Either3::First(p) => {
+                    if let Ok(n) = self.mac.read_frame(p).await {
+                        rx_chan.rx_done(n);
+                    }
+                }
+                Either3::Second(p) => {
+                    self.mac.write_frame(p).await.ok();
+                    tx_chan.tx_done();
+                }
+                Either3::Third(()) => {
+                    if self.mac.is_link_up().await {
+                        state_chan.set_link_state(LinkState::Up);
+                    } else {
+                        state_chan.set_link_state(LinkState::Down);
                     }
                 }
-            } else {
-                state_chan.set_link_state(LinkState::Down);
             }
         }
     }

embassy-net/src/lib.rs

@@ -860,6 +860,9 @@ impl<D: Driver> Inner<D> {
             let socket = s.sockets.get_mut::<dhcpv4::Socket>(dhcp_handle);
 
             if self.link_up {
+                if old_link_up != self.link_up {
+                    socket.reset();
+                }
                 match socket.poll() {
                     None => {}
                     Some(dhcpv4::Event::Deconfigured) => {

embassy-rp/src/adc.rs

@@ -213,6 +213,7 @@ impl<'d> Adc<'d, Async> {
         ch: &mut Channel<'_>,
         buf: &mut [W],
         fcs_err: bool,
+        div: u16,
         dma: impl Peripheral<P = impl dma::Channel>,
     ) -> Result<(), Error> {
         let r = Self::regs();
@@ -258,6 +259,7 @@ impl<'d> Adc<'d, Async> {
         // start conversions and wait for dma to finish. we can't report errors early
         // because there's no interrupt to signal them, and inspecting every element
         // of the fifo is too costly to do here.
+        r.div().write_set(|w| w.set_int(div));
         r.cs().write_set(|w| w.set_start_many(true));
         dma.await;
         mem::drop(auto_reset);
@@ -275,9 +277,10 @@ impl<'d> Adc<'d, Async> {
         &mut self,
         ch: &mut Channel<'_>,
         buf: &mut [S],
+        div: u16,
         dma: impl Peripheral<P = impl dma::Channel>,
     ) -> Result<(), Error> {
-        self.read_many_inner(ch, buf, false, dma).await
+        self.read_many_inner(ch, buf, false, div, dma).await
     }
 
     #[inline]
@@ -285,11 +288,12 @@ impl<'d> Adc<'d, Async> {
         &mut self,
         ch: &mut Channel<'_>,
         buf: &mut [Sample],
+        div: u16,
         dma: impl Peripheral<P = impl dma::Channel>,
     ) {
         // errors are reported in individual samples
         let _ = self
-            .read_many_inner(ch, unsafe { mem::transmute::<_, &mut [u16]>(buf) }, true, dma)
+            .read_many_inner(ch, unsafe { mem::transmute::<_, &mut [u16]>(buf) }, true, div, dma)
             .await;
     }
 }

embassy-rp/src/pwm.rs

@@ -10,16 +10,39 @@ use crate::gpio::sealed::Pin as _;
 use crate::gpio::{AnyPin, Pin as GpioPin};
 use crate::{pac, peripherals, RegExt};
 
+/// The configuration of a PWM slice.
+/// Note the period in clock cycles of a slice can be computed as:
+/// `(top + 1) * (phase_correct ? 1 : 2) * divider`
 #[non_exhaustive]
 #[derive(Clone)]
 pub struct Config {
+    /// Inverts the PWM output signal on channel A.
     pub invert_a: bool,
+    /// Inverts the PWM output signal on channel B.
     pub invert_b: bool,
+    /// Enables phase-correct mode for PWM operation.
+    /// In phase-correct mode, the PWM signal is generated in such a way that
+    /// the pulse is always centered regardless of the duty cycle.
+    /// The output frequency is halved when phase-correct mode is enabled.
     pub phase_correct: bool,
+    /// Enables the PWM slice, allowing it to generate an output.
     pub enable: bool,
+    /// A fractional clock divider, represented as a fixed-point number with
+    /// 8 integer bits and 4 fractional bits. It allows precise control over
+    /// the PWM output frequency by gating the PWM counter increment.
+    /// A higher value will result in a slower output frequency.
     pub divider: fixed::FixedU16<fixed::types::extra::U4>,
+    /// The output on channel A goes high when `compare_a` is higher than the
+    /// counter. A compare of 0 will produce an always low output, while a
+    /// compare of `top + 1` will produce an always high output.
     pub compare_a: u16,
+    /// The output on channel B goes high when `compare_b` is higher than the
+    /// counter. A compare of 0 will produce an always low output, while a
+    /// compare of `top + 1` will produce an always high output.
     pub compare_b: u16,
+    /// The point at which the counter wraps, representing the maximum possible
+    /// period. The counter will either wrap to 0 or reverse depending on the
+    /// setting of `phase_correct`.
     pub top: u16,
 }
 
@@ -173,6 +196,9 @@ impl<'d, T: Channel> Pwm<'d, T> {
         });
     }
 
+    /// Advances a slice’s output phase by one count while it is running
+    /// by inserting a pulse into the clock enable. The counter
+    /// will not count faster than once per cycle.
     #[inline]
     pub fn phase_advance(&mut self) {
         let p = self.inner.regs();
@@ -180,6 +206,9 @@ impl<'d, T: Channel> Pwm<'d, T> {
         while p.csr().read().ph_adv() {}
     }
 
+    /// Retards a slice’s output phase by one count while it is running
+    /// by deleting a pulse from the clock enable. The counter will not
+    /// count backward when clock enable is permenantly low.
     #[inline]
     pub fn phase_retard(&mut self) {
         let p = self.inner.regs();

embassy-stm32/Cargo.toml

@@ -58,7 +58,7 @@ rand_core = "0.6.3"
 sdio-host = "0.5.0"
 embedded-sdmmc = { git = "https://github.com/embassy-rs/embedded-sdmmc-rs", rev = "a4f293d3a6f72158385f79c98634cb8a14d0d2fc", optional = true }
 critical-section = "1.1"
-stm32-metapac = { git = "https://github.com/embassy-rs/stm32-data-generated", tag = "stm32-data-5b04234fbe61ea875f1a904cd5f68795daaeb526" }
+stm32-metapac = { git = "https://github.com/embassy-rs/stm32-data-generated", tag = "stm32-data-bcc9b6bf9fa195e91625849efc4ba473d9ace4e9" }
 vcell = "0.1.3"
 bxcan = "0.7.0"
 nb = "1.0.0"
@@ -76,7 +76,7 @@ critical-section = { version = "1.1", features = ["std"] }
 [build-dependencies]
 proc-macro2 = "1.0.36"
 quote = "1.0.15"
-stm32-metapac = { git = "https://github.com/embassy-rs/stm32-data-generated", tag = "stm32-data-5b04234fbe61ea875f1a904cd5f68795daaeb526", default-features = false, features = ["metadata"]}
+stm32-metapac = { git = "https://github.com/embassy-rs/stm32-data-generated", tag = "stm32-data-bcc9b6bf9fa195e91625849efc4ba473d9ace4e9", default-features = false, features = ["metadata"]}
 
 
 [features]

embassy-stm32/build.rs

@@ -1,4 +1,4 @@
-use std::collections::{HashMap, HashSet};
+use std::collections::{BTreeMap, BTreeSet, HashMap, HashSet};
 use std::fmt::Write as _;
 use std::path::PathBuf;
 use std::{env, fs};
@@ -352,7 +352,7 @@ fn main() {
     // ========
     // Generate DMA IRQs.
 
-    let mut dma_irqs: HashMap<&str, Vec<(&str, &str, &str)>> = HashMap::new();
+    let mut dma_irqs: BTreeMap<&str, Vec<(&str, &str, &str)>> = BTreeMap::new();
 
     for p in METADATA.peripherals {
         if let Some(r) = &p.registers {
@@ -371,22 +371,27 @@ fn main() {
         }
     }
 
-    for (irq, channels) in dma_irqs {
-        let irq = format_ident!("{}", irq);
+    let dma_irqs: TokenStream = dma_irqs
+        .iter()
+        .map(|(irq, channels)| {
+            let irq = format_ident!("{}", irq);
 
-        let xdma = format_ident!("{}", channels[0].0);
-        let channels = channels.iter().map(|(_, dma, ch)| format_ident!("{}_{}", dma, ch));
+            let xdma = format_ident!("{}", channels[0].0);
+            let channels = channels.iter().map(|(_, dma, ch)| format_ident!("{}_{}", dma, ch));
 
-        g.extend(quote! {
-            #[cfg(feature = "rt")]
-            #[crate::interrupt]
-            unsafe fn #irq () {
-                #(
-                    <crate::peripherals::#channels as crate::dma::#xdma::sealed::Channel>::on_irq();
-                )*
+            quote! {
+                #[cfg(feature = "rt")]
+                #[crate::interrupt]
+                unsafe fn #irq () {
+                    #(
+                        <crate::peripherals::#channels as crate::dma::#xdma::sealed::Channel>::on_irq();
+                    )*
+                }
             }
-        });
-    }
+        })
+        .collect();
+
+    g.extend(dma_irqs);
 
     // ========
     // Extract the rcc registers
@@ -433,7 +438,7 @@ fn main() {
     // Generate RccPeripheral impls
 
     let refcounted_peripherals = HashSet::from(["usart", "adc"]);
-    let mut refcount_statics = HashSet::new();
+    let mut refcount_statics = BTreeSet::new();
 
     for p in METADATA.peripherals {
         if !singletons.contains(&p.name.to_string()) {

embassy-stm32/src/gpio.rs

@@ -763,6 +763,13 @@ pub(crate) unsafe fn init(_cs: CriticalSection) {
     <crate::peripherals::AFIO as crate::rcc::sealed::RccPeripheral>::enable_and_reset_with_cs(_cs);
 
     crate::_generated::init_gpio();
+
+    // Setting this bit is mandatory to use PG[15:2].
+    #[cfg(stm32u5)]
+    crate::pac::PWR.svmcr().modify(|w| {
+        w.set_io2sv(true);
+        w.set_io2vmen(true);
+    });
 }
 
 mod eh02 {

embassy-stm32/src/ipcc.rs

@@ -5,6 +5,7 @@ use core::task::Poll;
 use self::sealed::Instance;
 use crate::interrupt;
 use crate::interrupt::typelevel::Interrupt;
+use crate::pac::rcc::vals::{Lptim1sel, Lptim2sel};
 use crate::peripherals::IPCC;
 use crate::rcc::sealed::RccPeripheral;
 
@@ -273,7 +274,7 @@ fn _configure_pwr() {
 
     // set LPTIM1 & LPTIM2 clock source
     rcc.ccipr().modify(|w| {
-        w.set_lptim1sel(0b00); // PCLK
-        w.set_lptim2sel(0b00); // PCLK
+        w.set_lptim1sel(Lptim1sel::PCLK1);
+        w.set_lptim2sel(Lptim2sel::PCLK1);
     });
 }

embassy-stm32/src/opamp.rs

@@ -101,18 +101,22 @@ pub trait InvertingPin<T: Instance>: sealed::InvertingPin<T> {}
 #[cfg(opamp_f3)]
 macro_rules! impl_opamp_output {
     ($inst:ident, $adc:ident, $ch:expr) => {
-        impl<'d, 'p, P: NonInvertingPin<crate::peripherals::$inst>> crate::adc::sealed::AdcPin<crate::peripherals::$adc>
-            for OpAmpOutput<'d, 'p, crate::peripherals::$inst, P>
-        {
-            fn channel(&self) -> u8 {
-                $ch
-            }
-        }
+        foreach_adc!(
+            ($adc, $common_inst:ident, $adc_clock:ident) => {
+                impl<'d, 'p, P: NonInvertingPin<crate::peripherals::$inst>> crate::adc::sealed::AdcPin<crate::peripherals::$adc>
+                    for OpAmpOutput<'d, 'p, crate::peripherals::$inst, P>
+                {
+                    fn channel(&self) -> u8 {
+                        $ch
+                    }
+                }
 
-        impl<'d, 'p, P: NonInvertingPin<crate::peripherals::$inst>> crate::adc::AdcPin<crate::peripherals::$adc>
-            for OpAmpOutput<'d, 'p, crate::peripherals::$inst, P>
-        {
-        }
+                impl<'d, 'p, P: NonInvertingPin<crate::peripherals::$inst>> crate::adc::AdcPin<crate::peripherals::$adc>
+                    for OpAmpOutput<'d, 'p, crate::peripherals::$inst, P>
+                {
+                }
+            };
+        );
     };
 }
 

embassy-stm32/src/rcc/f1.rs

@@ -169,14 +169,7 @@ pub(crate) unsafe fn init(config: Config) {
         #[cfg(not(rcc_f100))]
         w.set_usbpre(Usbpre::from_bits(usbpre as u8));
         w.set_sw(if pllmul_bits.is_some() {
-            #[cfg(not(rcc_f1cl))]
-            {
-                Sw::PLL1_P
-            }
-            #[cfg(rcc_f1cl)]
-            {
-                Sw::PLL
-            }
+            Sw::PLL1_P
         } else if config.hse.is_some() {
             Sw::HSE
         } else {

embassy-stm32/src/rcc/f4f7.rs

@@ -2,7 +2,7 @@ pub use crate::pac::rcc::vals::{
     Hpre as AHBPrescaler, Pllm as PllPreDiv, Plln as PllMul, Pllp, Pllq, Pllr, Pllsrc as PllSource,
     Ppre as APBPrescaler, Sw as Sysclk,
 };
-use crate::pac::{FLASH, PWR, RCC};
+use crate::pac::{FLASH, RCC};
 use crate::rcc::{set_freqs, Clocks};
 use crate::time::Hertz;
 
@@ -101,11 +101,17 @@ impl Default for Config {
 
 pub(crate) unsafe fn init(config: Config) {
     // always enable overdrive for now. Make it configurable in the future.
-    PWR.cr1().modify(|w| w.set_oden(true));
-    while !PWR.csr1().read().odrdy() {}
+    #[cfg(not(any(
+        stm32f401, stm32f410, stm32f411, stm32f412, stm32f413, stm32f423, stm32f405, stm32f407, stm32f415, stm32f417
+    )))]
+    {
+        use crate::pac::PWR;
+        PWR.cr1().modify(|w| w.set_oden(true));
+        while !PWR.csr1().read().odrdy() {}
 
-    PWR.cr1().modify(|w| w.set_odswen(true));
-    while !PWR.csr1().read().odswrdy() {}
+        PWR.cr1().modify(|w| w.set_odswen(true));
+        while !PWR.csr1().read().odswrdy() {}
+    }
 
     // Configure HSI
     let hsi = match config.hsi {
@@ -146,9 +152,9 @@ pub(crate) unsafe fn init(config: Config) {
         source: config.pll_src,
     };
     let pll = init_pll(PllInstance::Pll, config.pll, &pll_input);
-    #[cfg(any(all(stm32f4, not(stm32f410)), stm32f7))]
+    #[cfg(any(all(stm32f4, not(any(stm32f410, stm32f429))), stm32f7))]
     let _plli2s = init_pll(PllInstance::Plli2s, config.plli2s, &pll_input);
-    #[cfg(any(stm32f446, stm32f427, stm32f437, stm32f4x9, stm32f7))]
+    #[cfg(all(any(stm32f446, stm32f427, stm32f437, stm32f4x9, stm32f7), not(stm32f429)))]
     let _pllsai = init_pll(PllInstance::Pllsai, config.pllsai, &pll_input);
 
     // Configure sysclk
@@ -160,8 +166,8 @@ pub(crate) unsafe fn init(config: Config) {
     };
 
     let hclk = sys / config.ahb_pre;
-    let (pclk1, pclk1_tim) = calc_pclk(hclk, config.apb1_pre);
-    let (pclk2, pclk2_tim) = calc_pclk(hclk, config.apb2_pre);
+    let (pclk1, pclk1_tim) = super::util::calc_pclk(hclk, config.apb1_pre);
+    let (pclk2, pclk2_tim) = super::util::calc_pclk(hclk, config.apb2_pre);
 
     assert!(max::SYSCLK.contains(&sys));
     assert!(max::HCLK.contains(&hclk));
@@ -191,15 +197,25 @@ pub(crate) unsafe fn init(config: Config) {
         pclk2_tim,
         rtc,
         pll1_q: pll.q,
-        #[cfg(all(rcc_f4, not(stm32f410)))]
+        #[cfg(all(rcc_f4, not(any(stm32f410, stm32f429))))]
         plli2s1_q: _plli2s.q,
-        #[cfg(all(rcc_f4, not(stm32f410)))]
+        #[cfg(all(rcc_f4, not(any(stm32f410, stm32f429))))]
         plli2s1_r: _plli2s.r,
 
-        #[cfg(any(stm32f427, stm32f429, stm32f437, stm32f439, stm32f446, stm32f469, stm32f479))]
+        #[cfg(stm32f429)]
+        plli2s1_q: None,
+        #[cfg(stm32f429)]
+        plli2s1_r: None,
+
+        #[cfg(any(stm32f427, stm32f437, stm32f439, stm32f446, stm32f469, stm32f479))]
         pllsai1_q: _pllsai.q,
-        #[cfg(any(stm32f427, stm32f429, stm32f437, stm32f439, stm32f446, stm32f469, stm32f479))]
+        #[cfg(any(stm32f427, stm32f437, stm32f439, stm32f446, stm32f469, stm32f479))]
         pllsai1_r: _pllsai.r,
+
+        #[cfg(stm32f429)]
+        pllsai1_q: None,
+        #[cfg(stm32f429)]
+        pllsai1_r: None,
     });
 }
 
@@ -217,6 +233,7 @@ struct PllOutput {
     r: Option<Hertz>,
 }
 
+#[allow(dead_code)]
 #[derive(PartialEq, Eq, Clone, Copy)]
 enum PllInstance {
     Pll,
@@ -320,15 +337,6 @@ fn flash_setup(clk: Hertz) {
     while FLASH.acr().read().latency() != latency {}
 }
 
-fn calc_pclk<D>(hclk: Hertz, ppre: D) -> (Hertz, Hertz)
-where
-    Hertz: core::ops::Div<D, Output = Hertz>,
-{
-    let pclk = hclk / ppre;
-    let pclk_tim = if hclk == pclk { pclk } else { pclk * 2u32 };
-    (pclk, pclk_tim)
-}
-
 #[cfg(stm32f7)]
 mod max {
     use core::ops::RangeInclusive;

embassy-stm32/src/rcc/g0.rs

@@ -1,7 +1,7 @@
 use crate::pac::flash::vals::Latency;
 use crate::pac::rcc::vals::{self, Sw};
 pub use crate::pac::rcc::vals::{
-    Hpre as AHBPrescaler, Hsidiv as HSI16Prescaler, Pllm, Plln, Pllp, Pllq, Pllr, Ppre as APBPrescaler,
+    Hpre as AHBPrescaler, Hsidiv as HSIPrescaler, Pllm, Plln, Pllp, Pllq, Pllr, Ppre as APBPrescaler,
 };
 use crate::pac::{FLASH, PWR, RCC};
 use crate::rcc::{set_freqs, Clocks};
@@ -14,7 +14,7 @@ pub const HSI_FREQ: Hertz = Hertz(16_000_000);
 #[derive(Clone, Copy)]
 pub enum ClockSrc {
     HSE(Hertz),
-    HSI16(HSI16Prescaler),
+    HSI(HSIPrescaler),
     PLL(PllConfig),
     LSI,
 }
@@ -46,9 +46,9 @@ pub struct PllConfig {
 impl Default for PllConfig {
     #[inline]
     fn default() -> PllConfig {
-        // HSI16 / 1 * 8 / 2 = 64 MHz
+        // HSI / 1 * 8 / 2 = 64 MHz
         PllConfig {
-            source: PllSrc::HSI16,
+            source: PllSrc::HSI,
             m: Pllm::DIV1,
             n: Plln::MUL8,
             r: Pllr::DIV2,
@@ -60,7 +60,7 @@ impl Default for PllConfig {
 
 #[derive(Clone, Copy, Eq, PartialEq)]
 pub enum PllSrc {
-    HSI16,
+    HSI,
     HSE(Hertz),
 }
 
@@ -77,7 +77,7 @@ impl Default for Config {
     #[inline]
     fn default() -> Config {
         Config {
-            mux: ClockSrc::HSI16(HSI16Prescaler::DIV1),
+            mux: ClockSrc::HSI(HSIPrescaler::DIV1),
             ahb_pre: AHBPrescaler::DIV1,
             apb_pre: APBPrescaler::DIV1,
             low_power_run: false,
@@ -89,7 +89,7 @@ impl Default for Config {
 impl PllConfig {
     pub(crate) fn init(self) -> Hertz {
         let (src, input_freq) = match self.source {
-            PllSrc::HSI16 => (vals::Pllsrc::HSI, HSI_FREQ),
+            PllSrc::HSI => (vals::Pllsrc::HSI, HSI_FREQ),
             PllSrc::HSE(freq) => (vals::Pllsrc::HSE, freq),
         };
 
@@ -121,7 +121,7 @@ impl PllConfig {
         // > 3. Change the desired parameter.
         // Enable whichever clock source we're using, and wait for it to become ready
         match self.source {
-            PllSrc::HSI16 => {
+            PllSrc::HSI => {
                 RCC.cr().write(|w| w.set_hsion(true));
                 while !RCC.cr().read().hsirdy() {}
             }
@@ -167,8 +167,8 @@ impl PllConfig {
 
 pub(crate) unsafe fn init(config: Config) {
     let (sys_clk, sw) = match config.mux {
-        ClockSrc::HSI16(div) => {
-            // Enable HSI16
+        ClockSrc::HSI(div) => {
+            // Enable HSI
             RCC.cr().write(|w| {
                 w.set_hsidiv(div);
                 w.set_hsion(true)

embassy-stm32/src/rcc/g4.rs

@@ -18,14 +18,14 @@ pub const HSI_FREQ: Hertz = Hertz(16_000_000);
 #[derive(Clone, Copy)]
 pub enum ClockSrc {
     HSE(Hertz),
-    HSI16,
+    HSI,
     PLL,
 }
 
 /// PLL clock input source
 #[derive(Clone, Copy, Debug)]
 pub enum PllSrc {
-    HSI16,
+    HSI,
     HSE(Hertz),
 }
 
@@ -33,7 +33,7 @@ impl Into<Pllsrc> for PllSrc {
     fn into(self) -> Pllsrc {
         match self {
             PllSrc::HSE(..) => Pllsrc::HSE,
-            PllSrc::HSI16 => Pllsrc::HSI,
+            PllSrc::HSI => Pllsrc::HSI,
         }
     }
 }
@@ -112,7 +112,7 @@ impl Default for Config {
     #[inline]
     fn default() -> Config {
         Config {
-            mux: ClockSrc::HSI16,
+            mux: ClockSrc::HSI,
             ahb_pre: AHBPrescaler::DIV1,
             apb1_pre: APBPrescaler::DIV1,
             apb2_pre: APBPrescaler::DIV1,
@@ -135,7 +135,7 @@ pub struct PllFreq {
 pub(crate) unsafe fn init(config: Config) {
     let pll_freq = config.pll.map(|pll_config| {
         let src_freq = match pll_config.source {
-            PllSrc::HSI16 => {
+            PllSrc::HSI => {
                 RCC.cr().write(|w| w.set_hsion(true));
                 while !RCC.cr().read().hsirdy() {}
 
@@ -196,8 +196,8 @@ pub(crate) unsafe fn init(config: Config) {
     });
 
     let (sys_clk, sw) = match config.mux {
-        ClockSrc::HSI16 => {
-            // Enable HSI16
+        ClockSrc::HSI => {
+            // Enable HSI
             RCC.cr().write(|w| w.set_hsion(true));
             while !RCC.cr().read().hsirdy() {}
 

embassy-stm32/src/rcc/h.rs

@@ -6,8 +6,11 @@ use crate::pac::pwr::vals::Vos;
 pub use crate::pac::rcc::vals::Adcdacsel as AdcClockSource;
 #[cfg(stm32h7)]
 pub use crate::pac::rcc::vals::Adcsel as AdcClockSource;
-use crate::pac::rcc::vals::{Ckpersel, Hsidiv, Pllrge, Pllsrc, Pllvcosel, Sw, Timpre};
-pub use crate::pac::rcc::vals::{Ckpersel as PerClockSource, Plldiv as PllDiv, Pllm as PllPreDiv, Plln as PllMul};
+pub use crate::pac::rcc::vals::{
+    Ckpersel as PerClockSource, Hsidiv as HSIPrescaler, Plldiv as PllDiv, Pllm as PllPreDiv, Plln as PllMul,
+    Pllsrc as PllSource, Sw as Sysclk,
+};
+use crate::pac::rcc::vals::{Ckpersel, Pllrge, Pllvcosel, Timpre};
 use crate::pac::{FLASH, PWR, RCC};
 use crate::rcc::{set_freqs, Clocks};
 use crate::time::Hertz;
@@ -58,41 +61,9 @@ pub struct Hse {
     pub mode: HseMode,
 }
 
-#[derive(Clone, Copy, Eq, PartialEq)]
-pub enum Hsi {
-    /// 64Mhz
-    Mhz64,
-    /// 32Mhz (divided by 2)
-    Mhz32,
-    /// 16Mhz (divided by 4)
-    Mhz16,
-    /// 8Mhz (divided by 8)
-    Mhz8,
-}
-
-#[derive(Clone, Copy, Eq, PartialEq)]
-pub enum Sysclk {
-    /// HSI selected as sysclk
-    HSI,
-    /// HSE selected as sysclk
-    HSE,
-    /// CSI selected as sysclk
-    CSI,
-    /// PLL1_P selected as sysclk
-    Pll1P,
-}
-
-#[derive(Clone, Copy, Eq, PartialEq)]
-pub enum PllSource {
-    Hsi,
-    Csi,
-    Hse,
-}
-
 #[derive(Clone, Copy)]
 pub struct Pll {
     /// Source clock selection.
-    #[cfg(stm32h5)]
     pub source: PllSource,
 
     /// PLL pre-divider (DIVM).
@@ -152,15 +123,12 @@ impl From<TimerPrescaler> for Timpre {
 /// Configuration of the core clocks
 #[non_exhaustive]
 pub struct Config {
-    pub hsi: Option<Hsi>,
+    pub hsi: Option<HSIPrescaler>,
     pub hse: Option<Hse>,
     pub csi: bool,
     pub hsi48: bool,
     pub sys: Sysclk,
 
-    #[cfg(stm32h7)]
-    pub pll_src: PllSource,
-
     pub pll1: Option<Pll>,
     pub pll2: Option<Pll>,
     #[cfg(any(rcc_h5, stm32h7))]
@@ -184,13 +152,11 @@ pub struct Config {
 impl Default for Config {
     fn default() -> Self {
         Self {
-            hsi: Some(Hsi::Mhz64),
+            hsi: Some(HSIPrescaler::DIV1),
             hse: None,
             csi: false,
             hsi48: false,
             sys: Sysclk::HSI,
-            #[cfg(stm32h7)]
-            pll_src: PllSource::Hsi,
             pll1: None,
             pll2: None,
             #[cfg(any(rcc_h5, stm32h7))]
@@ -303,19 +269,13 @@ pub(crate) unsafe fn init(config: Config) {
             RCC.cr().modify(|w| w.set_hsion(false));
             None
         }
-        Some(hsi) => {
-            let (freq, hsidiv) = match hsi {
-                Hsi::Mhz64 => (HSI_FREQ / 1u32, Hsidiv::DIV1),
-                Hsi::Mhz32 => (HSI_FREQ / 2u32, Hsidiv::DIV2),
-                Hsi::Mhz16 => (HSI_FREQ / 4u32, Hsidiv::DIV4),
-                Hsi::Mhz8 => (HSI_FREQ / 8u32, Hsidiv::DIV8),
-            };
+        Some(hsidiv) => {
             RCC.cr().modify(|w| {
                 w.set_hsidiv(hsidiv);
                 w.set_hsion(true);
             });
             while !RCC.cr().read().hsirdy() {}
-            Some(freq)
+            Some(HSI_FREQ / hsidiv)
         }
     };
 
@@ -360,25 +320,29 @@ pub(crate) unsafe fn init(config: Config) {
         }
     };
 
+    // H7 has shared PLLSRC, check it's equal in all PLLs.
+    #[cfg(stm32h7)]
+    {
+        let plls = [&config.pll1, &config.pll2, &config.pll3];
+        if !super::util::all_equal(plls.into_iter().flatten().map(|p| p.source)) {
+            panic!("Source must be equal across all enabled PLLs.")
+        };
+    }
+
     // Configure PLLs.
-    let pll_input = PllInput {
-        csi,
-        hse,
-        hsi,
-        #[cfg(stm32h7)]
-        source: config.pll_src,
-    };
+    let pll_input = PllInput { csi, hse, hsi };
     let pll1 = init_pll(0, config.pll1, &pll_input);
     let pll2 = init_pll(1, config.pll2, &pll_input);
     #[cfg(any(rcc_h5, stm32h7))]
     let pll3 = init_pll(2, config.pll3, &pll_input);
 
     // Configure sysclk
-    let (sys, sw) = match config.sys {
-        Sysclk::HSI => (unwrap!(hsi), Sw::HSI),
-        Sysclk::HSE => (unwrap!(hse), Sw::HSE),
-        Sysclk::CSI => (unwrap!(csi), Sw::CSI),
-        Sysclk::Pll1P => (unwrap!(pll1.p), Sw::PLL1_P),
+    let sys = match config.sys {
+        Sysclk::HSI => unwrap!(hsi),
+        Sysclk::HSE => unwrap!(hse),
+        Sysclk::CSI => unwrap!(csi),
+        Sysclk::PLL1_P => unwrap!(pll1.p),
+        _ => unreachable!(),
     };
 
     // Check limits.
@@ -389,7 +353,14 @@ pub(crate) unsafe fn init(config: Config) {
         VoltageScale::Scale2 => (Hertz(150_000_000), Hertz(150_000_000)),
         VoltageScale::Scale3 => (Hertz(100_000_000), Hertz(100_000_000)),
     };
-    #[cfg(stm32h7)]
+    #[cfg(pwr_h7rm0455)]
+    let (d1cpre_clk_max, hclk_max, pclk_max) = match config.voltage_scale {
+        VoltageScale::Scale0 => (Hertz(280_000_000), Hertz(280_000_000), Hertz(140_000_000)),
+        VoltageScale::Scale1 => (Hertz(225_000_000), Hertz(225_000_000), Hertz(112_500_000)),
+        VoltageScale::Scale2 => (Hertz(160_000_000), Hertz(160_000_000), Hertz(80_000_000)),
+        VoltageScale::Scale3 => (Hertz(88_000_000), Hertz(88_000_000), Hertz(44_000_000)),
+    };
+    #[cfg(all(stm32h7, not(pwr_h7rm0455)))]
     let (d1cpre_clk_max, hclk_max, pclk_max) = match config.voltage_scale {
         VoltageScale::Scale0 => (Hertz(480_000_000), Hertz(240_000_000), Hertz(120_000_000)),
         VoltageScale::Scale1 => (Hertz(400_000_000), Hertz(200_000_000), Hertz(100_000_000)),
@@ -495,8 +466,8 @@ pub(crate) unsafe fn init(config: Config) {
 
     RCC.cfgr().modify(|w| w.set_timpre(config.timer_prescaler.into()));
 
-    RCC.cfgr().modify(|w| w.set_sw(sw));
-    while RCC.cfgr().read().sws() != sw {}
+    RCC.cfgr().modify(|w| w.set_sw(config.sys));
+    while RCC.cfgr().read().sws() != config.sys {}
 
     // IO compensation cell - Requires CSI clock and SYSCFG
     #[cfg(stm32h7)] // TODO h5
@@ -581,8 +552,6 @@ struct PllInput {
     hsi: Option<Hertz>,
     hse: Option<Hertz>,
     csi: Option<Hertz>,
-    #[cfg(stm32h7)]
-    source: PllSource,
 }
 
 struct PllOutput {
@@ -612,15 +581,11 @@ fn init_pll(num: usize, config: Option<Pll>, input: &PllInput) -> PllOutput {
         };
     };
 
-    #[cfg(stm32h5)]
-    let source = config.source;
-    #[cfg(stm32h7)]
-    let source = input.source;
-
-    let (in_clk, src) = match source {
-        PllSource::Hsi => (unwrap!(input.hsi), Pllsrc::HSI),
-        PllSource::Hse => (unwrap!(input.hse), Pllsrc::HSE),
-        PllSource::Csi => (unwrap!(input.csi), Pllsrc::CSI),
+    let in_clk = match config.source {
+        PllSource::DISABLE => panic!("must not set PllSource::Disable"),
+        PllSource::HSI => unwrap!(input.hsi),
+        PllSource::HSE => unwrap!(input.hse),
+        PllSource::CSI => unwrap!(input.csi),
     };
 
     let ref_clk = in_clk / config.prediv as u32;
@@ -660,7 +625,7 @@ fn init_pll(num: usize, config: Option<Pll>, input: &PllInput) -> PllOutput {
 
     #[cfg(stm32h5)]
     RCC.pllcfgr(num).write(|w| {
-        w.set_pllsrc(src);
+        w.set_pllsrc(config.source);
         w.set_divm(config.prediv);
         w.set_pllvcosel(vco_range);
         w.set_pllrge(ref_range);
@@ -674,7 +639,7 @@ fn init_pll(num: usize, config: Option<Pll>, input: &PllInput) -> PllOutput {
     {
         RCC.pllckselr().modify(|w| {
             w.set_divm(num, config.prediv);
-            w.set_pllsrc(src);
+            w.set_pllsrc(config.source);
         });
         RCC.pllcfgr().modify(|w| {
             w.set_pllvcosel(num, vco_range);

embassy-stm32/src/rcc/l0l1.rs

@@ -18,20 +18,20 @@ pub enum ClockSrc {
     MSI(MSIRange),
     PLL(PLLSource, PLLMul, PLLDiv),
     HSE(Hertz),
-    HSI16,
+    HSI,
 }
 
 /// PLL clock input source
 #[derive(Clone, Copy)]
 pub enum PLLSource {
-    HSI16,
+    HSI,
     HSE(Hertz),
 }
 
 impl From<PLLSource> for Pllsrc {
     fn from(val: PLLSource) -> Pllsrc {
         match val {
-            PLLSource::HSI16 => Pllsrc::HSI,
+            PLLSource::HSI => Pllsrc::HSI,
             PLLSource::HSE(_) => Pllsrc::HSE,
         }
     }
@@ -83,10 +83,10 @@ pub(crate) unsafe fn init(config: Config) {
             let freq = 32_768 * (1 << (range as u8 + 1));
             (Hertz(freq), Sw::MSI)
         }
-        ClockSrc::HSI16 => {
-            // Enable HSI16
-            RCC.cr().write(|w| w.set_hsi16on(true));
-            while !RCC.cr().read().hsi16rdy() {}
+        ClockSrc::HSI => {
+            // Enable HSI
+            RCC.cr().write(|w| w.set_hsion(true));
+            while !RCC.cr().read().hsirdy() {}
 
             (HSI_FREQ, Sw::HSI)
         }
@@ -105,10 +105,10 @@ pub(crate) unsafe fn init(config: Config) {
                     while !RCC.cr().read().hserdy() {}
                     freq
                 }
-                PLLSource::HSI16 => {
+                PLLSource::HSI => {
                     // Enable HSI
-                    RCC.cr().write(|w| w.set_hsi16on(true));
-                    while !RCC.cr().read().hsi16rdy() {}
+                    RCC.cr().write(|w| w.set_hsion(true));
+                    while !RCC.cr().read().hsirdy() {}
                     HSI_FREQ
                 }
             };
@@ -156,23 +156,9 @@ pub(crate) unsafe fn init(config: Config) {
         w.set_ppre2(config.apb2_pre);
     });
 
-    let ahb_freq = sys_clk / config.ahb_pre;
-
-    let (apb1_freq, apb1_tim_freq) = match config.apb1_pre {
-        APBPrescaler::DIV1 => (ahb_freq, ahb_freq),
-        pre => {
-            let freq = ahb_freq / pre;
-            (freq, freq * 2u32)
-        }
-    };
-
-    let (apb2_freq, apb2_tim_freq) = match config.apb2_pre {
-        APBPrescaler::DIV1 => (ahb_freq, ahb_freq),
-        pre => {
-            let freq = ahb_freq / pre;
-            (freq, freq * 2u32)
-        }
-    };
+    let hclk1 = sys_clk / config.ahb_pre;
+    let (pclk1, pclk1_tim) = super::util::calc_pclk(hclk1, config.apb1_pre);
+    let (pclk2, pclk2_tim) = super::util::calc_pclk(hclk1, config.apb2_pre);
 
     #[cfg(crs)]
     if config.enable_hsi48 {
@@ -209,11 +195,11 @@ pub(crate) unsafe fn init(config: Config) {
 
     set_freqs(Clocks {
         sys: sys_clk,
-        hclk1: ahb_freq,
-        pclk1: apb1_freq,
-        pclk2: apb2_freq,
-        pclk1_tim: apb1_tim_freq,
-        pclk2_tim: apb2_tim_freq,
+        hclk1,
+        pclk1,
+        pclk2,
+        pclk1_tim,
+        pclk2_tim,
         rtc,
     });
 }

embassy-stm32/src/rcc/l4l5.rs

@@ -1,8 +1,11 @@
 use crate::pac::rcc::regs::Cfgr;
-use crate::pac::rcc::vals::Msirgsel;
+#[cfg(any(stm32l4, stm32l5, stm32wb))]
+pub use crate::pac::rcc::vals::Clk48sel as Clk48Src;
+#[cfg(any(stm32wb, stm32wl))]
+pub use crate::pac::rcc::vals::Hsepre as HsePrescaler;
 pub use crate::pac::rcc::vals::{
-    Clk48sel as Clk48Src, Hpre as AHBPrescaler, Msirange as MSIRange, Pllm as PllPreDiv, Plln as PllMul,
-    Pllp as PllPDiv, Pllq as PllQDiv, Pllr as PllRDiv, Pllsrc as PLLSource, Ppre as APBPrescaler, Sw as ClockSrc,
+    Hpre as AHBPrescaler, Msirange as MSIRange, Pllm as PllPreDiv, Plln as PllMul, Pllp as PllPDiv, Pllq as PllQDiv,
+    Pllr as PllRDiv, Pllsrc as PLLSource, Ppre as APBPrescaler, Sw as ClockSrc,
 };
 use crate::pac::{FLASH, RCC};
 use crate::rcc::{set_freqs, Clocks};
@@ -11,6 +14,25 @@ use crate::time::Hertz;
 /// HSI speed
 pub const HSI_FREQ: Hertz = Hertz(16_000_000);
 
+#[derive(Clone, Copy, Eq, PartialEq)]
+pub enum HseMode {
+    /// crystal/ceramic oscillator (HSEBYP=0)
+    Oscillator,
+    /// external analog clock (low swing) (HSEBYP=1)
+    Bypass,
+}
+
+#[derive(Clone, Copy, Eq, PartialEq)]
+pub struct Hse {
+    /// HSE frequency.
+    pub freq: Hertz,
+    /// HSE mode.
+    pub mode: HseMode,
+    /// HSE prescaler
+    #[cfg(any(stm32wb, stm32wl))]
+    pub prescaler: HsePrescaler,
+}
+
 #[derive(Clone, Copy)]
 pub struct Pll {
     /// PLL source
@@ -34,13 +56,14 @@ pub struct Pll {
 pub struct Config {
     // base clock sources
     pub msi: Option<MSIRange>,
-    pub hsi16: bool,
-    pub hse: Option<Hertz>,
-    #[cfg(not(any(stm32l47x, stm32l48x)))]
+    pub hsi: bool,
+    pub hse: Option<Hse>,
+    #[cfg(any(all(stm32l4, not(any(stm32l47x, stm32l48x))), stm32l5, stm32wb))]
     pub hsi48: bool,
 
     // pll
     pub pll: Option<Pll>,
+    #[cfg(any(stm32l4, stm32l5, stm32wb))]
     pub pllsai1: Option<Pll>,
     #[cfg(any(stm32l47x, stm32l48x, stm32l49x, stm32l4ax, rcc_l4plus, stm32l5))]
     pub pllsai2: Option<Pll>,
@@ -50,8 +73,13 @@ pub struct Config {
     pub ahb_pre: AHBPrescaler,
     pub apb1_pre: APBPrescaler,
     pub apb2_pre: APBPrescaler,
+    #[cfg(any(stm32wl5x, stm32wb))]
+    pub core2_ahb_pre: AHBPrescaler,
+    #[cfg(any(stm32wl, stm32wb))]
+    pub shared_ahb_pre: AHBPrescaler,
 
     // muxes
+    #[cfg(any(stm32l4, stm32l5, stm32wb))]
     pub clk48_src: Clk48Src,
 
     // low speed LSI/LSE/RTC
@@ -63,30 +91,69 @@ impl Default for Config {
     fn default() -> Config {
         Config {
             hse: None,
-            hsi16: false,
+            hsi: false,
             msi: Some(MSIRange::RANGE4M),
             mux: ClockSrc::MSI,
             ahb_pre: AHBPrescaler::DIV1,
             apb1_pre: APBPrescaler::DIV1,
             apb2_pre: APBPrescaler::DIV1,
+            #[cfg(any(stm32wl5x, stm32wb))]
+            core2_ahb_pre: AHBPrescaler::DIV1,
+            #[cfg(any(stm32wl, stm32wb))]
+            shared_ahb_pre: AHBPrescaler::DIV1,
             pll: None,
+            #[cfg(any(stm32l4, stm32l5, stm32wb))]
             pllsai1: None,
             #[cfg(any(stm32l47x, stm32l48x, stm32l49x, stm32l4ax, rcc_l4plus, stm32l5))]
             pllsai2: None,
-            #[cfg(not(any(stm32l471, stm32l475, stm32l476, stm32l486)))]
+            #[cfg(any(all(stm32l4, not(any(stm32l47x, stm32l48x))), stm32l5, stm32wb))]
             hsi48: true,
+            #[cfg(any(stm32l4, stm32l5, stm32wb))]
             clk48_src: Clk48Src::HSI48,
             ls: Default::default(),
         }
     }
 }
 
+#[cfg(stm32wb)]
+pub const WPAN_DEFAULT: Config = Config {
+    hse: Some(Hse {
+        freq: Hertz(32_000_000),
+        mode: HseMode::Oscillator,
+        prescaler: HsePrescaler::DIV1,
+    }),
+    mux: ClockSrc::PLL1_R,
+    hsi48: true,
+    msi: None,
+    hsi: false,
+    clk48_src: Clk48Src::PLL1_Q,
+
+    ls: super::LsConfig::default_lse(),
+
+    pll: Some(Pll {
+        source: PLLSource::HSE,
+        prediv: PllPreDiv::DIV2,
+        mul: PllMul::MUL12,
+        divp: Some(PllPDiv::DIV3), // 32 / 2 * 12 / 3 = 64Mhz
+        divq: Some(PllQDiv::DIV4), // 32 / 2 * 12 / 4 = 48Mhz
+        divr: Some(PllRDiv::DIV3), // 32 / 2 * 12 / 3 = 64Mhz
+    }),
+    pllsai1: None,
+
+    ahb_pre: AHBPrescaler::DIV1,
+    core2_ahb_pre: AHBPrescaler::DIV2,
+    shared_ahb_pre: AHBPrescaler::DIV1,
+    apb1_pre: APBPrescaler::DIV1,
+    apb2_pre: APBPrescaler::DIV1,
+};
+
 pub(crate) unsafe fn init(config: Config) {
     // Switch to MSI to prevent problems with PLL configuration.
     if !RCC.cr().read().msion() {
         // Turn on MSI and configure it to 4MHz.
         RCC.cr().modify(|w| {
-            w.set_msirgsel(Msirgsel::CR);
+            #[cfg(not(stm32wb))]
+            w.set_msirgsel(crate::pac::rcc::vals::Msirgsel::CR);
             w.set_msirange(MSIRange::RANGE4M);
             w.set_msipllen(false);
             w.set_msion(true)
@@ -111,9 +178,10 @@ pub(crate) unsafe fn init(config: Config) {
 
     let msi = config.msi.map(|range| {
         // Enable MSI
-        RCC.cr().write(|w| {
+        RCC.cr().modify(|w| {
+            #[cfg(not(stm32wb))]
+            w.set_msirgsel(crate::pac::rcc::vals::Msirgsel::CR);
             w.set_msirange(range);
-            w.set_msirgsel(Msirgsel::CR);
             w.set_msion(true);
 
             // If LSE is enabled, enable calibration of MSI
@@ -127,21 +195,27 @@ pub(crate) unsafe fn init(config: Config) {
         msirange_to_hertz(range)
     });
 
-    let hsi16 = config.hsi16.then(|| {
-        RCC.cr().write(|w| w.set_hsion(true));
+    let hsi = config.hsi.then(|| {
+        RCC.cr().modify(|w| w.set_hsion(true));
         while !RCC.cr().read().hsirdy() {}
 
         HSI_FREQ
     });
 
-    let hse = config.hse.map(|freq| {
-        RCC.cr().write(|w| w.set_hseon(true));
+    let hse = config.hse.map(|hse| {
+        RCC.cr().modify(|w| {
+            #[cfg(stm32wl)]
+            w.set_hsebyppwr(hse.mode == HseMode::Bypass);
+            #[cfg(not(stm32wl))]
+            w.set_hsebyp(hse.mode == HseMode::Bypass);
+            w.set_hseon(true);
+        });
         while !RCC.cr().read().hserdy() {}
 
-        freq
+        hse.freq
     });
 
-    #[cfg(not(any(stm32l47x, stm32l48x)))]
+    #[cfg(any(all(stm32l4, not(any(stm32l47x, stm32l48x))), stm32l5, stm32wb))]
     let hsi48 = config.hsi48.then(|| {
         RCC.crrcr().modify(|w| w.set_hsi48on(true));
         while !RCC.crrcr().read().hsi48rdy() {}
@@ -153,6 +227,7 @@ pub(crate) unsafe fn init(config: Config) {
 
     let _plls = [
         &config.pll,
+        #[cfg(any(stm32l4, stm32l5, stm32wb))]
         &config.pllsai1,
         #[cfg(any(stm32l47x, stm32l48x, stm32l49x, stm32l4ax, rcc_l4plus, stm32l5))]
         &config.pllsai2,
@@ -160,7 +235,7 @@ pub(crate) unsafe fn init(config: Config) {
 
     // L4 has shared PLLSRC, PLLM, check it's equal in all PLLs.
     #[cfg(all(stm32l4, not(rcc_l4plus)))]
-    match get_equal(_plls.into_iter().flatten().map(|p| (p.source, p.prediv))) {
+    match super::util::get_equal(_plls.into_iter().flatten().map(|p| (p.source, p.prediv))) {
         Err(()) => panic!("Source must be equal across all enabled PLLs."),
         Ok(None) => {}
         Ok(Some((source, prediv))) => RCC.pllcfgr().write(|w| {
@@ -169,9 +244,9 @@ pub(crate) unsafe fn init(config: Config) {
         }),
     };
 
-    // L4+ has shared PLLSRC, check it's equal in all PLLs.
-    #[cfg(any(rcc_l4plus))]
-    match get_equal(_plls.into_iter().flatten().map(|p| p.source)) {
+    // L4+, WL has shared PLLSRC, check it's equal in all PLLs.
+    #[cfg(any(rcc_l4plus, stm32wl))]
+    match super::util::get_equal(_plls.into_iter().flatten().map(|p| p.source)) {
         Err(()) => panic!("Source must be equal across all enabled PLLs."),
         Ok(None) => {}
         Ok(Some(source)) => RCC.pllcfgr().write(|w| {
@@ -179,31 +254,30 @@ pub(crate) unsafe fn init(config: Config) {
         }),
     };
 
-    let pll_input = PllInput { hse, hsi16, msi };
+    let pll_input = PllInput { hse, hsi, msi };
     let pll = init_pll(PllInstance::Pll, config.pll, &pll_input);
+    #[cfg(any(stm32l4, stm32l5, stm32wb))]
     let pllsai1 = init_pll(PllInstance::Pllsai1, config.pllsai1, &pll_input);
     #[cfg(any(stm32l47x, stm32l48x, stm32l49x, stm32l4ax, rcc_l4plus, stm32l5))]
     let _pllsai2 = init_pll(PllInstance::Pllsai2, config.pllsai2, &pll_input);
 
     let sys_clk = match config.mux {
         ClockSrc::HSE => hse.unwrap(),
-        ClockSrc::HSI => hsi16.unwrap(),
+        ClockSrc::HSI => hsi.unwrap(),
         ClockSrc::MSI => msi.unwrap(),
-        #[cfg(rcc_l4)]
-        ClockSrc::PLL1_P => pll._r.unwrap(),
-        #[cfg(not(rcc_l4))]
-        ClockSrc::PLL1_R => pll._r.unwrap(),
+        ClockSrc::PLL1_R => pll.r.unwrap(),
     };
 
     #[cfg(stm32l4)]
     RCC.ccipr().modify(|w| w.set_clk48sel(config.clk48_src));
     #[cfg(stm32l5)]
     RCC.ccipr1().modify(|w| w.set_clk48sel(config.clk48_src));
+    #[cfg(any(stm32l4, stm32l5, stm32wb))]
     let _clk48 = match config.clk48_src {
         Clk48Src::HSI48 => hsi48,
         Clk48Src::MSI => msi,
-        Clk48Src::PLLSAI1_Q => pllsai1._q,
-        Clk48Src::PLL1_Q => pll._q,
+        Clk48Src::PLLSAI1_Q => pllsai1.q,
+        Clk48Src::PLL1_Q => pll.q,
     };
 
     #[cfg(rcc_l4plus)]
@@ -211,29 +285,56 @@ pub(crate) unsafe fn init(config: Config) {
     #[cfg(all(stm32l4, not(rcc_l4plus)))]
     assert!(sys_clk.0 <= 80_000_000);
 
+    let hclk1 = sys_clk / config.ahb_pre;
+    let (pclk1, pclk1_tim) = super::util::calc_pclk(hclk1, config.apb1_pre);
+    let (pclk2, pclk2_tim) = super::util::calc_pclk(hclk1, config.apb2_pre);
+    #[cfg(not(any(stm32wl5x, stm32wb)))]
+    let hclk2 = hclk1;
+    #[cfg(any(stm32wl5x, stm32wb))]
+    let hclk2 = sys_clk / config.core2_ahb_pre;
+    #[cfg(not(any(stm32wl, stm32wb)))]
+    let hclk3 = hclk1;
+    #[cfg(any(stm32wl, stm32wb))]
+    let hclk3 = sys_clk / config.shared_ahb_pre;
+
     // Set flash wait states
     #[cfg(stm32l4)]
-    FLASH.acr().modify(|w| {
-        w.set_latency(match sys_clk.0 {
-            0..=16_000_000 => 0,
-            0..=32_000_000 => 1,
-            0..=48_000_000 => 2,
-            0..=64_000_000 => 3,
-            _ => 4,
-        })
-    });
-    // VCORE Range 0 (performance), others TODO
+    let latency = match hclk1.0 {
+        0..=16_000_000 => 0,
+        0..=32_000_000 => 1,
+        0..=48_000_000 => 2,
+        0..=64_000_000 => 3,
+        _ => 4,
+    };
     #[cfg(stm32l5)]
-    FLASH.acr().modify(|w| {
-        w.set_latency(match sys_clk.0 {
-            0..=20_000_000 => 0,
-            0..=40_000_000 => 1,
-            0..=60_000_000 => 2,
-            0..=80_000_000 => 3,
-            0..=100_000_000 => 4,
-            _ => 5,
-        })
-    });
+    let latency = match hclk1.0 {
+        // VCORE Range 0 (performance), others TODO
+        0..=20_000_000 => 0,
+        0..=40_000_000 => 1,
+        0..=60_000_000 => 2,
+        0..=80_000_000 => 3,
+        0..=100_000_000 => 4,
+        _ => 5,
+    };
+    #[cfg(stm32wl)]
+    let latency = match hclk3.0 {
+        // VOS RANGE1, others TODO.
+        ..=18_000_000 => 0,
+        ..=36_000_000 => 1,
+        _ => 2,
+    };
+    #[cfg(stm32wb)]
+    let latency = match hclk3.0 {
+        // VOS RANGE1, others TODO.
+        ..=18_000_000 => 0,
+        ..=36_000_000 => 1,
+        ..=54_000_000 => 2,
+        ..=64_000_000 => 3,
+        _ => 4,
+    };
+
+    FLASH.acr().modify(|w| w.set_latency(latency));
+    while FLASH.acr().read().latency() != latency {}
 
     RCC.cfgr().modify(|w| {
         w.set_sw(config.mux);
@@ -243,33 +344,29 @@ pub(crate) unsafe fn init(config: Config) {
     });
     while RCC.cfgr().read().sws() != config.mux {}
 
-    let ahb_freq = sys_clk / config.ahb_pre;
-
-    let (apb1_freq, apb1_tim_freq) = match config.apb1_pre {
-        APBPrescaler::DIV1 => (ahb_freq, ahb_freq),
-        pre => {
-            let freq = ahb_freq / pre;
-            (freq, freq * 2u32)
-        }
-    };
-
-    let (apb2_freq, apb2_tim_freq) = match config.apb2_pre {
-        APBPrescaler::DIV1 => (ahb_freq, ahb_freq),
-        pre => {
-            let freq = ahb_freq / pre;
-            (freq, freq * 2u32)
-        }
-    };
+    #[cfg(any(stm32wl, stm32wb))]
+    {
+        RCC.extcfgr().modify(|w| {
+            w.set_shdhpre(config.shared_ahb_pre);
+            #[cfg(any(stm32wl5x, stm32wb))]
+            w.set_c2hpre(config.core2_ahb_pre);
+        });
+        while !RCC.extcfgr().read().shdhpref() {}
+        #[cfg(any(stm32wl5x, stm32wb))]
+        while !RCC.extcfgr().read().c2hpref() {}
+    }
 
     set_freqs(Clocks {
         sys: sys_clk,
-        hclk1: ahb_freq,
-        hclk2: ahb_freq,
-        hclk3: ahb_freq,
-        pclk1: apb1_freq,
-        pclk2: apb2_freq,
-        pclk1_tim: apb1_tim_freq,
-        pclk2_tim: apb2_tim_freq,
+        hclk1,
+        hclk2,
+        hclk3,
+        pclk1,
+        pclk2,
+        pclk1_tim,
+        pclk2_tim,
+        #[cfg(stm32wl)]
+        pclk3: hclk3,
         #[cfg(rcc_l4)]
         hsi: None,
         #[cfg(rcc_l4)]
@@ -308,60 +405,58 @@ fn msirange_to_hertz(range: MSIRange) -> Hertz {
     }
 }
 
-#[allow(unused)]
-fn get_equal<T: Eq>(mut iter: impl Iterator<Item = T>) -> Result<Option<T>, ()> {
-    let Some(x) = iter.next() else { return Ok(None) };
-    if !iter.all(|y| y == x) {
-        return Err(());
-    }
-    return Ok(Some(x));
-}
-
 struct PllInput {
-    hsi16: Option<Hertz>,
+    hsi: Option<Hertz>,
     hse: Option<Hertz>,
     msi: Option<Hertz>,
 }
 
+#[allow(unused)]
 #[derive(Default)]
 struct PllOutput {
-    _p: Option<Hertz>,
-    _q: Option<Hertz>,
-    _r: Option<Hertz>,
+    p: Option<Hertz>,
+    q: Option<Hertz>,
+    r: Option<Hertz>,
 }
 
 #[derive(PartialEq, Eq, Clone, Copy)]
 enum PllInstance {
     Pll,
+    #[cfg(any(stm32l4, stm32l5, stm32wb))]
     Pllsai1,
     #[cfg(any(stm32l47x, stm32l48x, stm32l49x, stm32l4ax, rcc_l4plus, stm32l5))]
     Pllsai2,
 }
 
-fn init_pll(instance: PllInstance, config: Option<Pll>, input: &PllInput) -> PllOutput {
-    // Disable PLL
+fn pll_enable(instance: PllInstance, enabled: bool) {
     match instance {
         PllInstance::Pll => {
-            RCC.cr().modify(|w| w.set_pllon(false));
-            while RCC.cr().read().pllrdy() {}
+            RCC.cr().modify(|w| w.set_pllon(enabled));
+            while RCC.cr().read().pllrdy() != enabled {}
         }
+        #[cfg(any(stm32l4, stm32l5, stm32wb))]
         PllInstance::Pllsai1 => {
-            RCC.cr().modify(|w| w.set_pllsai1on(false));
-            while RCC.cr().read().pllsai1rdy() {}
+            RCC.cr().modify(|w| w.set_pllsai1on(enabled));
+            while RCC.cr().read().pllsai1rdy() != enabled {}
         }
         #[cfg(any(stm32l47x, stm32l48x, stm32l49x, stm32l4ax, rcc_l4plus, stm32l5))]
         PllInstance::Pllsai2 => {
-            RCC.cr().modify(|w| w.set_pllsai2on(false));
-            while RCC.cr().read().pllsai2rdy() {}
+            RCC.cr().modify(|w| w.set_pllsai2on(enabled));
+            while RCC.cr().read().pllsai2rdy() != enabled {}
         }
     }
+}
+
+fn init_pll(instance: PllInstance, config: Option<Pll>, input: &PllInput) -> PllOutput {
+    // Disable PLL
+    pll_enable(instance, false);
 
     let Some(pll) = config else { return PllOutput::default() };
 
     let pll_src = match pll.source {
-        PLLSource::NONE => panic!("must not select PLL source as NONE"),
+        PLLSource::DISABLE => panic!("must not select PLL source as DISABLE"),
         PLLSource::HSE => input.hse,
-        PLLSource::HSI => input.hsi16,
+        PLLSource::HSI => input.hsi,
         PLLSource::MSI => input.msi,
     };
 
@@ -403,6 +498,7 @@ fn init_pll(instance: PllInstance, config: Option<Pll>, input: &PllInput) -> Pll
             w.set_pllsrc(pll.source);
             write_fields!(w);
         }),
+        #[cfg(any(stm32l4, stm32l5, stm32wb))]
         PllInstance::Pllsai1 => RCC.pllsai1cfgr().write(|w| {
             #[cfg(any(rcc_l4plus, stm32l5))]
             w.set_pllm(pll.prediv);
@@ -421,21 +517,7 @@ fn init_pll(instance: PllInstance, config: Option<Pll>, input: &PllInput) -> Pll
     }
 
     // Enable PLL
-    match instance {
-        PllInstance::Pll => {
-            RCC.cr().modify(|w| w.set_pllon(true));
-            while !RCC.cr().read().pllrdy() {}
-        }
-        PllInstance::Pllsai1 => {
-            RCC.cr().modify(|w| w.set_pllsai1on(true));
-            while !RCC.cr().read().pllsai1rdy() {}
-        }
-        #[cfg(any(stm32l47x, stm32l48x, stm32l49x, stm32l4ax, rcc_l4plus, stm32l5))]
-        PllInstance::Pllsai2 => {
-            RCC.cr().modify(|w| w.set_pllsai2on(true));
-            while !RCC.cr().read().pllsai2rdy() {}
-        }
-    }
+    pll_enable(instance, true);
 
-    PllOutput { _p: p, _q: q, _r: r }
+    PllOutput { p, q, r }
 }

embassy-stm32/src/rcc/mod.rs

@@ -19,11 +19,9 @@ pub use mco::*;
 #[cfg_attr(rcc_g4, path = "g4.rs")]
 #[cfg_attr(any(rcc_h5, rcc_h50, rcc_h7, rcc_h7rm0433, rcc_h7ab), path = "h.rs")]
 #[cfg_attr(any(rcc_l0, rcc_l0_v2, rcc_l1), path = "l0l1.rs")]
-#[cfg_attr(any(rcc_l4, rcc_l4plus, rcc_l5), path = "l4l5.rs")]
+#[cfg_attr(any(rcc_l4, rcc_l4plus, rcc_l5, rcc_wl5, rcc_wle, rcc_wb), path = "l4l5.rs")]
 #[cfg_attr(rcc_u5, path = "u5.rs")]
-#[cfg_attr(rcc_wb, path = "wb.rs")]
 #[cfg_attr(rcc_wba, path = "wba.rs")]
-#[cfg_attr(any(rcc_wl5, rcc_wle), path = "wl.rs")]
 mod _version;
 #[cfg(feature = "low-power")]
 use core::sync::atomic::{AtomicU32, Ordering};
@@ -248,3 +246,33 @@ pub(crate) mod sealed {
 }
 
 pub trait RccPeripheral: sealed::RccPeripheral + 'static {}
+
+#[allow(unused)]
+mod util {
+    use crate::time::Hertz;
+
+    pub fn calc_pclk<D>(hclk: Hertz, ppre: D) -> (Hertz, Hertz)
+    where
+        Hertz: core::ops::Div<D, Output = Hertz>,
+    {
+        let pclk = hclk / ppre;
+        let pclk_tim = if hclk == pclk { pclk } else { pclk * 2u32 };
+        (pclk, pclk_tim)
+    }
+
+    pub fn all_equal<T: Eq>(mut iter: impl Iterator<Item = T>) -> bool {
+        let Some(x) = iter.next() else { return true };
+        if !iter.all(|y| y == x) {
+            return false;
+        }
+        true
+    }
+
+    pub fn get_equal<T: Eq>(mut iter: impl Iterator<Item = T>) -> Result<Option<T>, ()> {
+        let Some(x) = iter.next() else { return Ok(None) };
+        if !iter.all(|y| y == x) {
+            return Err(());
+        }
+        Ok(Some(x))
+    }
+}

embassy-stm32/src/rcc/u5.rs

@@ -10,6 +10,7 @@ pub const HSI_FREQ: Hertz = Hertz(16_000_000);
 pub use crate::pac::pwr::vals::Vos as VoltageScale;
 
 #[derive(Copy, Clone)]
+#[allow(non_camel_case_types)]
 pub enum ClockSrc {
     /// Use an internal medium speed oscillator (MSIS) as the system clock.
     MSI(Msirange),
@@ -19,9 +20,9 @@ pub enum ClockSrc {
     /// never exceed 50 MHz.
     HSE(Hertz),
     /// Use the 16 MHz internal high speed oscillator as the system clock.
-    HSI16,
+    HSI,
     /// Use PLL1 as the system clock.
-    PLL1R(PllConfig),
+    PLL1_R(PllConfig),
 }
 
 impl Default for ClockSrc {
@@ -53,10 +54,10 @@ pub struct PllConfig {
 }
 
 impl PllConfig {
-    /// A configuration for HSI16 / 1 * 10 / 1 = 160 MHz
-    pub const fn hsi16_160mhz() -> Self {
+    /// A configuration for HSI / 1 * 10 / 1 = 160 MHz
+    pub const fn hsi_160mhz() -> Self {
         PllConfig {
-            source: PllSrc::HSI16,
+            source: PllSrc::HSI,
             m: Pllm::DIV1,
             n: Plln::MUL10,
             r: Plldiv::DIV1,
@@ -84,7 +85,7 @@ pub enum PllSrc {
     /// never exceed 50 MHz.
     HSE(Hertz),
     /// Use the 16 MHz internal high speed oscillator as the PLL source.
-    HSI16,
+    HSI,
 }
 
 impl Into<Pllsrc> for PllSrc {
@@ -92,7 +93,7 @@ impl Into<Pllsrc> for PllSrc {
         match self {
             PllSrc::MSIS(..) => Pllsrc::MSIS,
             PllSrc::HSE(..) => Pllsrc::HSE,
-            PllSrc::HSI16 => Pllsrc::HSI16,
+            PllSrc::HSI => Pllsrc::HSI,
         }
     }
 }
@@ -102,8 +103,8 @@ impl Into<Sw> for ClockSrc {
         match self {
             ClockSrc::MSI(..) => Sw::MSIS,
             ClockSrc::HSE(..) => Sw::HSE,
-            ClockSrc::HSI16 => Sw::HSI16,
-            ClockSrc::PLL1R(..) => Sw::PLL1_R,
+            ClockSrc::HSI => Sw::HSI,
+            ClockSrc::PLL1_R(..) => Sw::PLL1_R,
         }
     }
 }
@@ -125,7 +126,7 @@ pub struct Config {
 }
 
 impl Config {
-    unsafe fn init_hsi16(&self) -> Hertz {
+    unsafe fn init_hsi(&self) -> Hertz {
         RCC.cr().write(|w| w.set_hsion(true));
         while !RCC.cr().read().hsirdy() {}
 
@@ -169,7 +170,7 @@ impl Config {
 
         RCC.icscr1().modify(|w| {
             w.set_msisrange(range);
-            w.set_msirgsel(Msirgsel::RCC_ICSCR1);
+            w.set_msirgsel(Msirgsel::ICSCR1);
         });
         RCC.cr().write(|w| {
             w.set_msipllen(false);
@@ -211,13 +212,13 @@ pub(crate) unsafe fn init(config: Config) {
     let sys_clk = match config.mux {
         ClockSrc::MSI(range) => config.init_msis(range),
         ClockSrc::HSE(freq) => config.init_hse(freq),
-        ClockSrc::HSI16 => config.init_hsi16(),
-        ClockSrc::PLL1R(pll) => {
+        ClockSrc::HSI => config.init_hsi(),
+        ClockSrc::PLL1_R(pll) => {
             // Configure the PLL source
             let source_clk = match pll.source {
                 PllSrc::MSIS(range) => config.init_msis(range),
                 PllSrc::HSE(hertz) => config.init_hse(hertz),
-                PllSrc::HSI16 => config.init_hsi16(),
+                PllSrc::HSI => config.init_hsi(),
             };
 
             // Calculate the reference clock, which is the source divided by m
@@ -292,7 +293,7 @@ pub(crate) unsafe fn init(config: Config) {
                 // Set the prescaler for PWR EPOD
                 w.set_pllmboost(mboost);
 
-                // Enable PLL1R output
+                // Enable PLL1_R output
                 w.set_pllren(true);
             });
 

embassy-stm32/src/rcc/wb.rs

@@ -1,258 +0,0 @@
-pub use crate::pac::rcc::vals::{
-    Hpre as AHBPrescaler, Hsepre as HsePrescaler, Pllm, Plln, Pllp, Pllq, Pllr, Pllsrc as PllSource,
-    Ppre as APBPrescaler, Sw as Sysclk,
-};
-use crate::rcc::{set_freqs, Clocks};
-use crate::time::{mhz, Hertz};
-
-/// HSI speed
-pub const HSI_FREQ: Hertz = Hertz(16_000_000);
-
-pub struct Hse {
-    pub prediv: HsePrescaler,
-
-    pub frequency: Hertz,
-}
-
-pub struct PllMux {
-    /// Source clock selection.
-    pub source: PllSource,
-
-    /// PLL pre-divider (DIVM). Must be between 1 and 63.
-    pub prediv: Pllm,
-}
-
-pub struct Pll {
-    /// PLL multiplication factor. Must be between 4 and 512.
-    pub mul: Plln,
-
-    /// PLL P division factor. If None, PLL P output is disabled. Must be between 1 and 128.
-    /// On PLL1, it must be even (in particular, it cannot be 1.)
-    pub divp: Option<Pllp>,
-    /// PLL Q division factor. If None, PLL Q output is disabled. Must be between 1 and 128.
-    pub divq: Option<Pllq>,
-    /// PLL R division factor. If None, PLL R output is disabled. Must be between 1 and 128.
-    pub divr: Option<Pllr>,
-}
-
-/// Clocks configutation
-pub struct Config {
-    pub hse: Option<Hse>,
-    pub sys: Sysclk,
-    pub mux: Option<PllMux>,
-    pub hsi48: bool,
-
-    pub pll: Option<Pll>,
-    pub pllsai: Option<Pll>,
-
-    pub ahb1_pre: AHBPrescaler,
-    pub ahb2_pre: AHBPrescaler,
-    pub ahb3_pre: AHBPrescaler,
-    pub apb1_pre: APBPrescaler,
-    pub apb2_pre: APBPrescaler,
-
-    pub ls: super::LsConfig,
-}
-
-pub const WPAN_DEFAULT: Config = Config {
-    hse: Some(Hse {
-        frequency: mhz(32),
-        prediv: HsePrescaler::DIV1,
-    }),
-    sys: Sysclk::PLL,
-    mux: Some(PllMux {
-        source: PllSource::HSE,
-        prediv: Pllm::DIV2,
-    }),
-    hsi48: true,
-
-    ls: super::LsConfig::default_lse(),
-
-    pll: Some(Pll {
-        mul: Plln::MUL12,
-        divp: Some(Pllp::DIV3),
-        divq: Some(Pllq::DIV4),
-        divr: Some(Pllr::DIV3),
-    }),
-    pllsai: None,
-
-    ahb1_pre: AHBPrescaler::DIV1,
-    ahb2_pre: AHBPrescaler::DIV2,
-    ahb3_pre: AHBPrescaler::DIV1,
-    apb1_pre: APBPrescaler::DIV1,
-    apb2_pre: APBPrescaler::DIV1,
-};
-
-impl Default for Config {
-    #[inline]
-    fn default() -> Config {
-        Config {
-            hse: None,
-            sys: Sysclk::HSI16,
-            mux: None,
-            pll: None,
-            pllsai: None,
-            hsi48: true,
-
-            ls: Default::default(),
-
-            ahb1_pre: AHBPrescaler::DIV1,
-            ahb2_pre: AHBPrescaler::DIV1,
-            ahb3_pre: AHBPrescaler::DIV1,
-            apb1_pre: APBPrescaler::DIV1,
-            apb2_pre: APBPrescaler::DIV1,
-        }
-    }
-}
-
-#[cfg(stm32wb)]
-/// RCC initialization function
-pub(crate) unsafe fn init(config: Config) {
-    let hse_clk = config.hse.as_ref().map(|hse| hse.frequency / hse.prediv);
-
-    let mux_clk = config.mux.as_ref().map(|pll_mux| {
-        (match pll_mux.source {
-            PllSource::HSE => hse_clk.unwrap(),
-            PllSource::HSI16 => HSI_FREQ,
-            _ => unreachable!(),
-        } / pll_mux.prediv)
-    });
-
-    let (pll_r, _pll_q, _pll_p) = match &config.pll {
-        Some(pll) => {
-            let pll_vco = mux_clk.unwrap() * pll.mul as u32;
-
-            (
-                pll.divr.map(|divr| pll_vco / divr),
-                pll.divq.map(|divq| pll_vco / divq),
-                pll.divp.map(|divp| pll_vco / divp),
-            )
-        }
-        None => (None, None, None),
-    };
-
-    let sys_clk = match config.sys {
-        Sysclk::HSE => hse_clk.unwrap(),
-        Sysclk::HSI16 => HSI_FREQ,
-        Sysclk::PLL => pll_r.unwrap(),
-        _ => unreachable!(),
-    };
-
-    let ahb1_clk = sys_clk / config.ahb1_pre;
-    let ahb2_clk = sys_clk / config.ahb2_pre;
-    let ahb3_clk = sys_clk / config.ahb3_pre;
-
-    let (apb1_clk, apb1_tim_clk) = match config.apb1_pre {
-        APBPrescaler::DIV1 => (ahb1_clk, ahb1_clk),
-        pre => {
-            let freq = ahb1_clk / pre;
-            (freq, freq * 2u32)
-        }
-    };
-
-    let (apb2_clk, apb2_tim_clk) = match config.apb2_pre {
-        APBPrescaler::DIV1 => (ahb1_clk, ahb1_clk),
-        pre => {
-            let freq = ahb1_clk / pre;
-            (freq, freq * 2u32)
-        }
-    };
-
-    let rcc = crate::pac::RCC;
-
-    let needs_hsi = if let Some(pll_mux) = &config.mux {
-        pll_mux.source == PllSource::HSI16
-    } else {
-        false
-    };
-
-    if needs_hsi || config.sys == Sysclk::HSI16 {
-        rcc.cr().modify(|w| {
-            w.set_hsion(true);
-        });
-
-        while !rcc.cr().read().hsirdy() {}
-    }
-
-    rcc.cfgr().modify(|w| w.set_stopwuck(true));
-
-    let rtc = config.ls.init();
-
-    match &config.hse {
-        Some(hse) => {
-            rcc.cr().modify(|w| {
-                w.set_hsepre(hse.prediv);
-                w.set_hseon(true);
-            });
-
-            while !rcc.cr().read().hserdy() {}
-        }
-        _ => {}
-    }
-
-    match &config.mux {
-        Some(pll_mux) => {
-            rcc.pllcfgr().modify(|w| {
-                w.set_pllm(pll_mux.prediv);
-                w.set_pllsrc(pll_mux.source.into());
-            });
-        }
-        _ => {}
-    };
-
-    match &config.pll {
-        Some(pll) => {
-            rcc.pllcfgr().modify(|w| {
-                w.set_plln(pll.mul);
-                pll.divp.map(|divp| {
-                    w.set_pllpen(true);
-                    w.set_pllp(divp)
-                });
-                pll.divq.map(|divq| {
-                    w.set_pllqen(true);
-                    w.set_pllq(divq)
-                });
-                pll.divr.map(|divr| {
-                    w.set_pllren(true);
-                    w.set_pllr(divr);
-                });
-            });
-
-            rcc.cr().modify(|w| w.set_pllon(true));
-
-            while !rcc.cr().read().pllrdy() {}
-        }
-        _ => {}
-    }
-
-    let _hsi48 = config.hsi48.then(|| {
-        rcc.crrcr().modify(|w| w.set_hsi48on(true));
-        while !rcc.crrcr().read().hsi48rdy() {}
-
-        Hertz(48_000_000)
-    });
-
-    rcc.cfgr().modify(|w| {
-        w.set_sw(config.sys.into());
-        w.set_hpre(config.ahb1_pre);
-        w.set_ppre1(config.apb1_pre);
-        w.set_ppre2(config.apb2_pre);
-    });
-
-    rcc.extcfgr().modify(|w| {
-        w.set_c2hpre(config.ahb2_pre);
-        w.set_shdhpre(config.ahb3_pre);
-    });
-
-    set_freqs(Clocks {
-        sys: sys_clk,
-        hclk1: ahb1_clk,
-        hclk2: ahb2_clk,
-        hclk3: ahb3_clk,
-        pclk1: apb1_clk,
-        pclk2: apb2_clk,
-        pclk1_tim: apb1_tim_clk,
-        pclk2_tim: apb2_tim_clk,
-        rtc,
-    })
-}

embassy-stm32/src/rcc/wba.rs

@@ -13,20 +13,20 @@ pub use crate::pac::rcc::vals::{Hpre as AHBPrescaler, Ppre as APBPrescaler};
 #[derive(Copy, Clone)]
 pub enum ClockSrc {
     HSE(Hertz),
-    HSI16,
+    HSI,
 }
 
 #[derive(Clone, Copy, Debug)]
 pub enum PllSrc {
     HSE(Hertz),
-    HSI16,
+    HSI,
 }
 
 impl Into<Pllsrc> for PllSrc {
     fn into(self) -> Pllsrc {
         match self {
             PllSrc::HSE(..) => Pllsrc::HSE,
-            PllSrc::HSI16 => Pllsrc::HSI16,
+            PllSrc::HSI => Pllsrc::HSI,
         }
     }
 }
@@ -35,7 +35,7 @@ impl Into<Sw> for ClockSrc {
     fn into(self) -> Sw {
         match self {
             ClockSrc::HSE(..) => Sw::HSE,
-            ClockSrc::HSI16 => Sw::HSI16,
+            ClockSrc::HSI => Sw::HSI,
         }
     }
 }
@@ -52,7 +52,7 @@ pub struct Config {
 impl Default for Config {
     fn default() -> Self {
         Self {
-            mux: ClockSrc::HSI16,
+            mux: ClockSrc::HSI,
             ahb_pre: AHBPrescaler::DIV1,
             apb1_pre: APBPrescaler::DIV1,
             apb2_pre: APBPrescaler::DIV1,
@@ -70,7 +70,7 @@ pub(crate) unsafe fn init(config: Config) {
 
             freq
         }
-        ClockSrc::HSI16 => {
+        ClockSrc::HSI => {
             RCC.cr().write(|w| w.set_hsion(true));
             while !RCC.cr().read().hsirdy() {}
 

embassy-stm32/src/rcc/wl.rs

@@ -1,184 +0,0 @@
-pub use crate::pac::pwr::vals::Vos as VoltageScale;
-use crate::pac::rcc::vals::Sw;
-pub use crate::pac::rcc::vals::{
-    Adcsel as AdcClockSource, Hpre as AHBPrescaler, Msirange as MSIRange, Pllm, Plln, Pllp, Pllq, Pllr,
-    Pllsrc as PllSource, Ppre as APBPrescaler,
-};
-use crate::pac::{FLASH, RCC};
-use crate::rcc::{set_freqs, Clocks};
-use crate::time::Hertz;
-
-/// HSI speed
-pub const HSI_FREQ: Hertz = Hertz(16_000_000);
-
-/// HSE speed
-pub const HSE_FREQ: Hertz = Hertz(32_000_000);
-
-/// System clock mux source
-#[derive(Clone, Copy)]
-pub enum ClockSrc {
-    MSI(MSIRange),
-    HSE,
-    HSI16,
-}
-
-/// Clocks configutation
-pub struct Config {
-    pub mux: ClockSrc,
-    pub ahb_pre: AHBPrescaler,
-    pub shd_ahb_pre: AHBPrescaler,
-    pub apb1_pre: APBPrescaler,
-    pub apb2_pre: APBPrescaler,
-    pub adc_clock_source: AdcClockSource,
-    pub ls: super::LsConfig,
-}
-
-impl Default for Config {
-    #[inline]
-    fn default() -> Config {
-        Config {
-            mux: ClockSrc::MSI(MSIRange::RANGE4M),
-            ahb_pre: AHBPrescaler::DIV1,
-            shd_ahb_pre: AHBPrescaler::DIV1,
-            apb1_pre: APBPrescaler::DIV1,
-            apb2_pre: APBPrescaler::DIV1,
-            adc_clock_source: AdcClockSource::HSI16,
-            ls: Default::default(),
-        }
-    }
-}
-
-pub(crate) unsafe fn init(config: Config) {
-    let (sys_clk, sw, vos) = match config.mux {
-        ClockSrc::HSI16 => (HSI_FREQ, Sw::HSI16, VoltageScale::RANGE2),
-        ClockSrc::HSE => (HSE_FREQ, Sw::HSE, VoltageScale::RANGE1),
-        ClockSrc::MSI(range) => (msirange_to_hertz(range), Sw::MSI, msirange_to_vos(range)),
-    };
-
-    let ahb_freq = sys_clk / config.ahb_pre;
-    let shd_ahb_freq = sys_clk / config.shd_ahb_pre;
-
-    let (apb1_freq, apb1_tim_freq) = match config.apb1_pre {
-        APBPrescaler::DIV1 => (ahb_freq, ahb_freq),
-        pre => {
-            let freq = ahb_freq / pre;
-            (freq, freq * 2u32)
-        }
-    };
-
-    let (apb2_freq, apb2_tim_freq) = match config.apb2_pre {
-        APBPrescaler::DIV1 => (ahb_freq, ahb_freq),
-        pre => {
-            let freq = ahb_freq / pre;
-            (freq, freq * 2u32)
-        }
-    };
-
-    // Adjust flash latency
-    let flash_clk_src_freq = shd_ahb_freq;
-    let ws = match vos {
-        VoltageScale::RANGE1 => match flash_clk_src_freq.0 {
-            0..=18_000_000 => 0b000,
-            18_000_001..=36_000_000 => 0b001,
-            _ => 0b010,
-        },
-        VoltageScale::RANGE2 => match flash_clk_src_freq.0 {
-            0..=6_000_000 => 0b000,
-            6_000_001..=12_000_000 => 0b001,
-            _ => 0b010,
-        },
-        _ => unreachable!(),
-    };
-
-    FLASH.acr().modify(|w| {
-        w.set_latency(ws);
-    });
-
-    while FLASH.acr().read().latency() != ws {}
-
-    match config.mux {
-        ClockSrc::HSI16 => {
-            // Enable HSI16
-            RCC.cr().write(|w| w.set_hsion(true));
-            while !RCC.cr().read().hsirdy() {}
-        }
-        ClockSrc::HSE => {
-            // Enable HSE
-            RCC.cr().write(|w| {
-                w.set_hsebyppwr(true);
-                w.set_hseon(true);
-            });
-            while !RCC.cr().read().hserdy() {}
-        }
-        ClockSrc::MSI(range) => {
-            let cr = RCC.cr().read();
-            assert!(!cr.msion() || cr.msirdy());
-            RCC.cr().write(|w| {
-                w.set_msirgsel(true);
-                w.set_msirange(range);
-                w.set_msion(true);
-
-                // If LSE is enabled, enable calibration of MSI
-                w.set_msipllen(config.ls.lse.is_some());
-            });
-            while !RCC.cr().read().msirdy() {}
-        }
-    }
-
-    RCC.extcfgr().modify(|w| {
-        w.set_shdhpre(config.shd_ahb_pre);
-    });
-
-    RCC.cfgr().modify(|w| {
-        w.set_sw(sw.into());
-        w.set_hpre(config.ahb_pre);
-        w.set_ppre1(config.apb1_pre);
-        w.set_ppre2(config.apb2_pre);
-    });
-
-    // ADC clock MUX
-    RCC.ccipr().modify(|w| w.set_adcsel(config.adc_clock_source));
-
-    // TODO: switch voltage range
-
-    let rtc = config.ls.init();
-
-    set_freqs(Clocks {
-        sys: sys_clk,
-        hclk1: ahb_freq,
-        hclk2: ahb_freq,
-        hclk3: shd_ahb_freq,
-        pclk1: apb1_freq,
-        pclk2: apb2_freq,
-        pclk3: shd_ahb_freq,
-        pclk1_tim: apb1_tim_freq,
-        pclk2_tim: apb2_tim_freq,
-        rtc,
-    });
-}
-
-fn msirange_to_hertz(range: MSIRange) -> Hertz {
-    match range {
-        MSIRange::RANGE100K => Hertz(100_000),
-        MSIRange::RANGE200K => Hertz(200_000),
-        MSIRange::RANGE400K => Hertz(400_000),
-        MSIRange::RANGE800K => Hertz(800_000),
-        MSIRange::RANGE1M => Hertz(1_000_000),
-        MSIRange::RANGE2M => Hertz(2_000_000),
-        MSIRange::RANGE4M => Hertz(4_000_000),
-        MSIRange::RANGE8M => Hertz(8_000_000),
-        MSIRange::RANGE16M => Hertz(16_000_000),
-        MSIRange::RANGE24M => Hertz(24_000_000),
-        MSIRange::RANGE32M => Hertz(32_000_000),
-        MSIRange::RANGE48M => Hertz(48_000_000),
-        _ => unreachable!(),
-    }
-}
-
-fn msirange_to_vos(range: MSIRange) -> VoltageScale {
-    if range.to_bits() > MSIRange::RANGE16M.to_bits() {
-        VoltageScale::RANGE1
-    } else {
-        VoltageScale::RANGE2
-    }
-}

embassy-stm32/src/rtc/mod.rs

@@ -184,7 +184,11 @@ impl Default for RtcCalibrationCyclePeriod {
 impl Rtc {
     pub fn new(_rtc: impl Peripheral<P = RTC>, rtc_config: RtcConfig) -> Self {
         #[cfg(not(any(stm32l0, stm32f3, stm32l1, stm32f0, stm32f2)))]
-        <RTC as crate::rcc::sealed::RccPeripheral>::enable_and_reset();
+        critical_section::with(|cs| {
+            <RTC as crate::rcc::sealed::RccPeripheral>::enable_and_reset_with_cs(cs);
+            #[cfg(feature = "low-power")]
+            crate::rcc::clock_refcount_sub(cs);
+        });
 
         let mut this = Self {
             #[cfg(feature = "low-power")]

embassy-stm32/src/sdmmc/mod.rs

@@ -1466,7 +1466,7 @@ cfg_if::cfg_if! {
             (SDMMC1) => {
                 critical_section::with(|_| unsafe {
                     let sdmmcsel = crate::pac::RCC.dckcfgr2().read().sdmmc1sel();
-                    if sdmmcsel == crate::pac::rcc::vals::Sdmmcsel::SYSCLK {
+                    if sdmmcsel == crate::pac::rcc::vals::Sdmmcsel::SYS {
                         crate::rcc::get_freqs().sys
                     } else {
                         crate::rcc::get_freqs().pll1_q.expect("PLL48 is required for SDMMC")
@@ -1476,7 +1476,7 @@ cfg_if::cfg_if! {
             (SDMMC2) => {
                 critical_section::with(|_| unsafe {
                     let sdmmcsel = crate::pac::RCC.dckcfgr2().read().sdmmc2sel();
-                    if sdmmcsel == crate::pac::rcc::vals::Sdmmcsel::SYSCLK {
+                    if sdmmcsel == crate::pac::rcc::vals::Sdmmcsel::SYS {
                         crate::rcc::get_freqs().sys
                     } else {
                         crate::rcc::get_freqs().pll1_q.expect("PLL48 is required for SDMMC")

embassy-stm32/src/timer/complementary_pwm.rs

@@ -57,18 +57,20 @@ impl<'d, T: ComplementaryCaptureCompare16bitInstance> ComplementaryPwm<'d, T> {
         _ch4: Option<PwmPin<'d, T, Ch4>>,
         _ch4n: Option<ComplementaryPwmPin<'d, T, Ch4>>,
         freq: Hertz,
+        counting_mode: CountingMode,
     ) -> Self {
-        Self::new_inner(tim, freq)
+        Self::new_inner(tim, freq, counting_mode)
     }
 
-    fn new_inner(tim: impl Peripheral<P = T> + 'd, freq: Hertz) -> Self {
+    fn new_inner(tim: impl Peripheral<P = T> + 'd, freq: Hertz, counting_mode: CountingMode) -> Self {
         into_ref!(tim);
 
         T::enable_and_reset();
 
         let mut this = Self { inner: tim };
 
-        this.inner.set_frequency(freq);
+        this.inner.set_counting_mode(counting_mode);
+        this.set_freq(freq);
         this.inner.start();
 
         this.inner.enable_outputs();
@@ -95,7 +97,12 @@ impl<'d, T: ComplementaryCaptureCompare16bitInstance> ComplementaryPwm<'d, T> {
     }
 
     pub fn set_freq(&mut self, freq: Hertz) {
-        self.inner.set_frequency(freq);
+        let multiplier = if self.inner.get_counting_mode().is_center_aligned() {
+            2u8
+        } else {
+            1u8
+        };
+        self.inner.set_frequency(freq * multiplier);
     }
 
     pub fn get_max_duty(&self) -> u16 {

embassy-stm32/src/timer/mod.rs

@@ -29,10 +29,17 @@ pub(crate) mod sealed {
             Self::regs().cr1().modify(|r| r.set_cen(false));
         }
 
+        /// Reset the counter value to 0
         fn reset(&mut self) {
             Self::regs().cnt().write(|r| r.set_cnt(0));
         }
 
+        /// Set the frequency of how many times per second the timer counts up to the max value or down to 0.
+        ///
+        /// This means that in the default edge-aligned mode,
+        /// the timer counter will wrap around at the same frequency as is being set.
+        /// In center-aligned mode (which not all timers support), the wrap-around frequency is effectively halved
+        /// because it needs to count up and down.
         fn set_frequency(&mut self, frequency: Hertz) {
             let f = frequency.0;
             let timer_f = Self::frequency().0;
@@ -85,8 +92,21 @@ pub(crate) mod sealed {
     pub trait GeneralPurpose16bitInstance: Basic16bitInstance {
         fn regs_gp16() -> crate::pac::timer::TimGp16;
 
-        fn set_count_direction(&mut self, direction: vals::Dir) {
-            Self::regs_gp16().cr1().modify(|r| r.set_dir(direction));
+        fn set_counting_mode(&mut self, mode: CountingMode) {
+            let (cms, dir) = mode.into();
+
+            let timer_enabled = Self::regs().cr1().read().cen();
+            // Changing from edge aligned to center aligned (and vice versa) is not allowed while the timer is running.
+            // Changing direction is discouraged while the timer is running.
+            assert!(!timer_enabled);
+
+            Self::regs_gp16().cr1().modify(|r| r.set_dir(dir));
+            Self::regs_gp16().cr1().modify(|r| r.set_cms(cms))
+        }
+
+        fn get_counting_mode(&self) -> CountingMode {
+            let cr1 = Self::regs_gp16().cr1().read();
+            (cr1.cms(), cr1.dir()).into()
         }
 
         fn set_clock_division(&mut self, ckd: vals::Ckd) {
@@ -293,6 +313,73 @@ impl From<InputTISelection> for stm32_metapac::timer::vals::CcmrInputCcs {
     }
 }
 
+#[repr(u8)]
+#[derive(Debug, Clone, Copy, PartialEq, Eq, Default)]
+pub enum CountingMode {
+    #[default]
+    /// The timer counts up to the reload value and then resets back to 0.
+    EdgeAlignedUp,
+    /// The timer counts down to 0 and then resets back to the reload value.
+    EdgeAlignedDown,
+    /// The timer counts up to the reload value and then counts back to 0.
+    ///
+    /// The output compare interrupt flags of channels configured in output are
+    /// set when the counter is counting down.
+    CenterAlignedDownInterrupts,
+    /// The timer counts up to the reload value and then counts back to 0.
+    ///
+    /// The output compare interrupt flags of channels configured in output are
+    /// set when the counter is counting up.
+    CenterAlignedUpInterrupts,
+    /// The timer counts up to the reload value and then counts back to 0.
+    ///
+    /// The output compare interrupt flags of channels configured in output are
+    /// set when the counter is counting both up or down.
+    CenterAlignedBothInterrupts,
+}
+
+impl CountingMode {
+    pub fn is_edge_aligned(&self) -> bool {
+        match self {
+            CountingMode::EdgeAlignedUp | CountingMode::EdgeAlignedDown => true,
+            _ => false,
+        }
+    }
+
+    pub fn is_center_aligned(&self) -> bool {
+        match self {
+            CountingMode::CenterAlignedDownInterrupts
+            | CountingMode::CenterAlignedUpInterrupts
+            | CountingMode::CenterAlignedBothInterrupts => true,
+            _ => false,
+        }
+    }
+}
+
+impl From<CountingMode> for (vals::Cms, vals::Dir) {
+    fn from(value: CountingMode) -> Self {
+        match value {
+            CountingMode::EdgeAlignedUp => (vals::Cms::EDGEALIGNED, vals::Dir::UP),
+            CountingMode::EdgeAlignedDown => (vals::Cms::EDGEALIGNED, vals::Dir::DOWN),
+            CountingMode::CenterAlignedDownInterrupts => (vals::Cms::CENTERALIGNED1, vals::Dir::UP),
+            CountingMode::CenterAlignedUpInterrupts => (vals::Cms::CENTERALIGNED2, vals::Dir::UP),
+            CountingMode::CenterAlignedBothInterrupts => (vals::Cms::CENTERALIGNED3, vals::Dir::UP),
+        }
+    }
+}
+
+impl From<(vals::Cms, vals::Dir)> for CountingMode {
+    fn from(value: (vals::Cms, vals::Dir)) -> Self {
+        match value {
+            (vals::Cms::EDGEALIGNED, vals::Dir::UP) => CountingMode::EdgeAlignedUp,
+            (vals::Cms::EDGEALIGNED, vals::Dir::DOWN) => CountingMode::EdgeAlignedDown,
+            (vals::Cms::CENTERALIGNED1, _) => CountingMode::CenterAlignedDownInterrupts,
+            (vals::Cms::CENTERALIGNED2, _) => CountingMode::CenterAlignedUpInterrupts,
+            (vals::Cms::CENTERALIGNED3, _) => CountingMode::CenterAlignedBothInterrupts,
+        }
+    }
+}
+
 #[derive(Clone, Copy)]
 pub enum OutputCompareMode {
     Frozen,
@@ -471,9 +558,5 @@ foreach_interrupt! {
                 crate::pac::$inst
             }
         }
-
-
-
-
     };
 }

embassy-stm32/src/timer/simple_pwm.rs

@@ -56,18 +56,20 @@ impl<'d, T: CaptureCompare16bitInstance> SimplePwm<'d, T> {
         _ch3: Option<PwmPin<'d, T, Ch3>>,
         _ch4: Option<PwmPin<'d, T, Ch4>>,
         freq: Hertz,
+        counting_mode: CountingMode,
     ) -> Self {
-        Self::new_inner(tim, freq)
+        Self::new_inner(tim, freq, counting_mode)
     }
 
-    fn new_inner(tim: impl Peripheral<P = T> + 'd, freq: Hertz) -> Self {
+    fn new_inner(tim: impl Peripheral<P = T> + 'd, freq: Hertz, counting_mode: CountingMode) -> Self {
         into_ref!(tim);
 
         T::enable_and_reset();
 
         let mut this = Self { inner: tim };
 
-        this.inner.set_frequency(freq);
+        this.inner.set_counting_mode(counting_mode);
+        this.set_freq(freq);
         this.inner.start();
 
         this.inner.enable_outputs();
@@ -92,7 +94,12 @@ impl<'d, T: CaptureCompare16bitInstance> SimplePwm<'d, T> {
     }
 
     pub fn set_freq(&mut self, freq: Hertz) {
-        self.inner.set_frequency(freq);
+        let multiplier = if self.inner.get_counting_mode().is_center_aligned() {
+            2u8
+        } else {
+            1u8
+        };
+        self.inner.set_frequency(freq * multiplier);
     }
 
     pub fn get_max_duty(&self) -> u16 {

examples/nrf52840-rtic/memory.x

@@ -1,7 +1,12 @@
 MEMORY
 {
   /* NOTE 1 K = 1 KiBi = 1024 bytes */
-  /* These values correspond to the NRF52840 with Softdevices S140 7.0.1 */
   FLASH : ORIGIN = 0x00000000, LENGTH = 1024K
   RAM : ORIGIN = 0x20000000, LENGTH = 256K
+
+  /* These values correspond to the NRF52840 with Softdevices S140 7.3.0 */
+  /*
+     FLASH : ORIGIN = 0x00027000, LENGTH = 868K
+     RAM : ORIGIN = 0x20020000, LENGTH = 128K
+  */
 }

examples/nrf52840/memory.x

@@ -1,7 +1,12 @@
 MEMORY
 {
   /* NOTE 1 K = 1 KiBi = 1024 bytes */
-  /* These values correspond to the NRF52840 with Softdevices S140 7.0.1 */
   FLASH : ORIGIN = 0x00000000, LENGTH = 1024K
   RAM : ORIGIN = 0x20000000, LENGTH = 256K
+
+  /* These values correspond to the NRF52840 with Softdevices S140 7.3.0 */
+  /*
+     FLASH : ORIGIN = 0x00027000, LENGTH = 868K
+     RAM : ORIGIN = 0x20020000, LENGTH = 128K
+  */
 }

examples/stm32f4/src/bin/pwm.rs

@@ -17,7 +17,7 @@ async fn main(_spawner: Spawner) {
     info!("Hello World!");
 
     let ch1 = PwmPin::new_ch1(p.PE9, OutputType::PushPull);
-    let mut pwm = SimplePwm::new(p.TIM1, Some(ch1), None, None, None, khz(10));
+    let mut pwm = SimplePwm::new(p.TIM1, Some(ch1), None, None, None, khz(10), Default::default());
     let max = pwm.get_max_duty();
     pwm.enable(Channel::Ch1);
 

examples/stm32f4/src/bin/pwm_complementary.rs

@@ -30,6 +30,7 @@ async fn main(_spawner: Spawner) {
         None,
         None,
         khz(10),
+        Default::default(),
     );
 
     let max = pwm.get_max_duty();

examples/stm32g4/src/bin/adc.rs

@@ -15,7 +15,7 @@ async fn main(_spawner: Spawner) {
     let mut config = Config::default();
 
     config.rcc.pll = Some(Pll {
-        source: PllSrc::HSI16,
+        source: PllSrc::HSI,
         prediv_m: PllM::DIV4,
         mul_n: PllN::MUL85,
         div_p: None,

examples/stm32g4/src/bin/pll.rs

@@ -14,7 +14,7 @@ async fn main(_spawner: Spawner) {
     let mut config = Config::default();
 
     config.rcc.pll = Some(Pll {
-        source: PllSrc::HSI16,
+        source: PllSrc::HSI,
         prediv_m: PllM::DIV4,
         mul_n: PllN::MUL85,
         div_p: None,

examples/stm32g4/src/bin/pwm.rs

@@ -17,7 +17,7 @@ async fn main(_spawner: Spawner) {
     info!("Hello World!");
 
     let ch1 = PwmPin::new_ch1(p.PC0, OutputType::PushPull);
-    let mut pwm = SimplePwm::new(p.TIM1, Some(ch1), None, None, None, khz(10));
+    let mut pwm = SimplePwm::new(p.TIM1, Some(ch1), None, None, None, khz(10), Default::default());
     let max = pwm.get_max_duty();
     pwm.enable(Channel::Ch1);
 

examples/stm32h5/src/bin/eth.rs

@@ -43,7 +43,7 @@ async fn main(spawner: Spawner) -> ! {
         mode: HseMode::BypassDigital,
     });
     config.rcc.pll1 = Some(Pll {
-        source: PllSource::Hse,
+        source: PllSource::HSE,
         prediv: PllPreDiv::DIV2,
         mul: PllMul::MUL125,
         divp: Some(PllDiv::DIV2),
@@ -54,7 +54,7 @@ async fn main(spawner: Spawner) -> ! {
     config.rcc.apb1_pre = APBPrescaler::DIV1;
     config.rcc.apb2_pre = APBPrescaler::DIV1;
     config.rcc.apb3_pre = APBPrescaler::DIV1;
-    config.rcc.sys = Sysclk::Pll1P;
+    config.rcc.sys = Sysclk::PLL1_P;
     config.rcc.voltage_scale = VoltageScale::Scale0;
     let p = embassy_stm32::init(config);
     info!("Hello World!");

examples/stm32h5/src/bin/usb_serial.rs

@@ -30,7 +30,7 @@ async fn main(_spawner: Spawner) {
         mode: HseMode::BypassDigital,
     });
     config.rcc.pll1 = Some(Pll {
-        source: PllSource::Hse,
+        source: PllSource::HSE,
         prediv: PllPreDiv::DIV2,
         mul: PllMul::MUL125,
         divp: Some(PllDiv::DIV2), // 250mhz
@@ -41,7 +41,7 @@ async fn main(_spawner: Spawner) {
     config.rcc.apb1_pre = APBPrescaler::DIV4;
     config.rcc.apb2_pre = APBPrescaler::DIV2;
     config.rcc.apb3_pre = APBPrescaler::DIV4;
-    config.rcc.sys = Sysclk::Pll1P;
+    config.rcc.sys = Sysclk::PLL1_P;
     config.rcc.voltage_scale = VoltageScale::Scale0;
     let p = embassy_stm32::init(config);
 

examples/stm32h7/src/bin/adc.rs

@@ -14,10 +14,10 @@ async fn main(_spawner: Spawner) {
     let mut config = Config::default();
     {
         use embassy_stm32::rcc::*;
-        config.rcc.hsi = Some(Hsi::Mhz64);
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
         config.rcc.csi = true;
-        config.rcc.pll_src = PllSource::Hsi;
         config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV2),
@@ -25,13 +25,14 @@ async fn main(_spawner: Spawner) {
             divr: None,
         });
         config.rcc.pll2 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV8), // 100mhz
             divq: None,
             divr: None,
         });
-        config.rcc.sys = Sysclk::Pll1P; // 400 Mhz
+        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
         config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
         config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz

examples/stm32h7/src/bin/camera.rs

@@ -28,17 +28,17 @@ async fn main(_spawner: Spawner) {
     let mut config = Config::default();
     {
         use embassy_stm32::rcc::*;
-        config.rcc.hsi = Some(Hsi::Mhz64);
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
         config.rcc.csi = true;
-        config.rcc.pll_src = PllSource::Hsi;
         config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV2),
             divq: Some(PllDiv::DIV8), // 100mhz
             divr: None,
         });
-        config.rcc.sys = Sysclk::Pll1P; // 400 Mhz
+        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
         config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
         config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz

examples/stm32h7/src/bin/dac.rs

@@ -16,10 +16,10 @@ fn main() -> ! {
     let mut config = Config::default();
     {
         use embassy_stm32::rcc::*;
-        config.rcc.hsi = Some(Hsi::Mhz64);
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
         config.rcc.csi = true;
-        config.rcc.pll_src = PllSource::Hsi;
         config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV2),
@@ -27,13 +27,14 @@ fn main() -> ! {
             divr: None,
         });
         config.rcc.pll2 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV8), // 100mhz
             divq: None,
             divr: None,
         });
-        config.rcc.sys = Sysclk::Pll1P; // 400 Mhz
+        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
         config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
         config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz

examples/stm32h7/src/bin/dac_dma.rs

@@ -24,10 +24,10 @@ async fn main(spawner: Spawner) {
     let mut config = embassy_stm32::Config::default();
     {
         use embassy_stm32::rcc::*;
-        config.rcc.hsi = Some(Hsi::Mhz64);
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
         config.rcc.csi = true;
-        config.rcc.pll_src = PllSource::Hsi;
         config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV2),
@@ -35,13 +35,14 @@ async fn main(spawner: Spawner) {
             divr: None,
         });
         config.rcc.pll2 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV8), // 100mhz
             divq: None,
             divr: None,
         });
-        config.rcc.sys = Sysclk::Pll1P; // 400 Mhz
+        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
         config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
         config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz

examples/stm32h7/src/bin/eth.rs

@@ -34,18 +34,18 @@ async fn main(spawner: Spawner) -> ! {
     let mut config = Config::default();
     {
         use embassy_stm32::rcc::*;
-        config.rcc.hsi = Some(Hsi::Mhz64);
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
         config.rcc.csi = true;
         config.rcc.hsi48 = true; // needed for RNG
-        config.rcc.pll_src = PllSource::Hsi;
         config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV2),
             divq: None,
             divr: None,
         });
-        config.rcc.sys = Sysclk::Pll1P; // 400 Mhz
+        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
         config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
         config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz

examples/stm32h7/src/bin/eth_client.rs

@@ -35,18 +35,18 @@ async fn main(spawner: Spawner) -> ! {
     let mut config = Config::default();
     {
         use embassy_stm32::rcc::*;
-        config.rcc.hsi = Some(Hsi::Mhz64);
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
         config.rcc.csi = true;
         config.rcc.hsi48 = true; // needed for RNG
-        config.rcc.pll_src = PllSource::Hsi;
         config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV2),
             divq: None,
             divr: None,
         });
-        config.rcc.sys = Sysclk::Pll1P; // 400 Mhz
+        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
         config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
         config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz

examples/stm32h7/src/bin/fmc.rs

@@ -14,17 +14,17 @@ async fn main(_spawner: Spawner) {
     let mut config = Config::default();
     {
         use embassy_stm32::rcc::*;
-        config.rcc.hsi = Some(Hsi::Mhz64);
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
         config.rcc.csi = true;
-        config.rcc.pll_src = PllSource::Hsi;
         config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV2),
             divq: Some(PllDiv::DIV8), // 100mhz
             divr: None,
         });
-        config.rcc.sys = Sysclk::Pll1P; // 400 Mhz
+        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
         config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
         config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz

examples/stm32h7/src/bin/low_level_timer_api.rs

@@ -17,18 +17,18 @@ async fn main(_spawner: Spawner) {
     let mut config = Config::default();
     {
         use embassy_stm32::rcc::*;
-        config.rcc.hsi = Some(Hsi::Mhz64);
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
         config.rcc.csi = true;
         config.rcc.hsi48 = true; // needed for RNG
-        config.rcc.pll_src = PllSource::Hsi;
         config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV2),
             divq: Some(PllDiv::DIV8), // 100mhz
             divr: None,
         });
-        config.rcc.sys = Sysclk::Pll1P; // 400 Mhz
+        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
         config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
         config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz

examples/stm32h7/src/bin/pwm.rs

@@ -17,17 +17,17 @@ async fn main(_spawner: Spawner) {
     let mut config = Config::default();
     {
         use embassy_stm32::rcc::*;
-        config.rcc.hsi = Some(Hsi::Mhz64);
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
         config.rcc.csi = true;
-        config.rcc.pll_src = PllSource::Hsi;
         config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV2),
             divq: None,
             divr: None,
         });
-        config.rcc.sys = Sysclk::Pll1P; // 400 Mhz
+        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
         config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
         config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz
@@ -39,7 +39,7 @@ async fn main(_spawner: Spawner) {
     info!("Hello World!");
 
     let ch1 = PwmPin::new_ch1(p.PA6, OutputType::PushPull);
-    let mut pwm = SimplePwm::new(p.TIM3, Some(ch1), None, None, None, khz(10));
+    let mut pwm = SimplePwm::new(p.TIM3, Some(ch1), None, None, None, khz(10), Default::default());
     let max = pwm.get_max_duty();
     pwm.enable(Channel::Ch1);
 

examples/stm32h7/src/bin/sdmmc.rs

@@ -18,17 +18,17 @@ async fn main(_spawner: Spawner) -> ! {
     let mut config = Config::default();
     {
         use embassy_stm32::rcc::*;
-        config.rcc.hsi = Some(Hsi::Mhz64);
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
         config.rcc.csi = true;
-        config.rcc.pll_src = PllSource::Hsi;
         config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV2),
             divq: Some(PllDiv::DIV4), // default clock chosen by SDMMCSEL. 200 Mhz
             divr: None,
         });
-        config.rcc.sys = Sysclk::Pll1P; // 400 Mhz
+        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
         config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
         config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz

examples/stm32h7/src/bin/spi.rs

@@ -40,17 +40,17 @@ fn main() -> ! {
     let mut config = Config::default();
     {
         use embassy_stm32::rcc::*;
-        config.rcc.hsi = Some(Hsi::Mhz64);
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
         config.rcc.csi = true;
-        config.rcc.pll_src = PllSource::Hsi;
         config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV2),
             divq: Some(PllDiv::DIV8), // used by SPI3. 100Mhz.
             divr: None,
         });
-        config.rcc.sys = Sysclk::Pll1P; // 400 Mhz
+        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
         config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
         config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz

examples/stm32h7/src/bin/spi_dma.rs

@@ -36,17 +36,17 @@ fn main() -> ! {
     let mut config = Config::default();
     {
         use embassy_stm32::rcc::*;
-        config.rcc.hsi = Some(Hsi::Mhz64);
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
         config.rcc.csi = true;
-        config.rcc.pll_src = PllSource::Hsi;
         config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV2),
             divq: Some(PllDiv::DIV8), // used by SPI3. 100Mhz.
             divr: None,
         });
-        config.rcc.sys = Sysclk::Pll1P; // 400 Mhz
+        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
         config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
         config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz

examples/stm32h7/src/bin/usb_serial.rs

@@ -23,18 +23,18 @@ async fn main(_spawner: Spawner) {
     let mut config = Config::default();
     {
         use embassy_stm32::rcc::*;
-        config.rcc.hsi = Some(Hsi::Mhz64);
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
         config.rcc.csi = true;
         config.rcc.hsi48 = true; // needed for USB
-        config.rcc.pll_src = PllSource::Hsi;
         config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV2),
             divq: None,
             divr: None,
         });
-        config.rcc.sys = Sysclk::Pll1P; // 400 Mhz
+        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
         config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
         config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz

examples/stm32l0/src/bin/lora_cad.rs

@@ -23,7 +23,7 @@ const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriatel
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = embassy_stm32::Config::default();
-    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSI16;
+    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSI;
     config.rcc.enable_hsi48 = true;
     let p = embassy_stm32::init(config);
 

examples/stm32l0/src/bin/lora_lorawan.rs

@@ -33,7 +33,7 @@ const LORAWAN_REGION: region::Region = region::Region::EU868; // warning: set th
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = embassy_stm32::Config::default();
-    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSI16;
+    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSI;
     config.rcc.enable_hsi48 = true;
     let p = embassy_stm32::init(config);
 

examples/stm32l0/src/bin/lora_p2p_receive.rs

@@ -23,7 +23,7 @@ const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriatel
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = embassy_stm32::Config::default();
-    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSI16;
+    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSI;
     config.rcc.enable_hsi48 = true;
     let p = embassy_stm32::init(config);
 

examples/stm32l0/src/bin/lora_p2p_send.rs

@@ -23,7 +23,7 @@ const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriatel
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = embassy_stm32::Config::default();
-    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSI16;
+    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSI;
     config.rcc.enable_hsi48 = true;
     let p = embassy_stm32::init(config);
 

examples/stm32l4/src/bin/rng.rs

@@ -17,7 +17,7 @@ bind_interrupts!(struct Irqs {
 async fn main(_spawner: Spawner) {
     let mut config = Config::default();
     config.rcc.mux = ClockSrc::PLL1_R;
-    config.rcc.hsi16 = true;
+    config.rcc.hsi = true;
     config.rcc.pll = Some(Pll {
         source: PLLSource::HSI,
         prediv: PllPreDiv::DIV1,

examples/stm32l4/src/bin/rtc.rs

@@ -5,7 +5,6 @@
 use chrono::{NaiveDate, NaiveDateTime};
 use defmt::*;
 use embassy_executor::Spawner;
-use embassy_stm32::rcc::{ClockSrc, LsConfig, PLLSource, Pll, PllMul, PllPreDiv, PllRDiv};
 use embassy_stm32::rtc::{Rtc, RtcConfig};
 use embassy_stm32::time::Hertz;
 use embassy_stm32::Config;
@@ -15,17 +14,23 @@ use {defmt_rtt as _, panic_probe as _};
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = Config::default();
-    config.rcc.mux = ClockSrc::PLL1_R;
-    config.rcc.hse = Some(Hertz::mhz(8));
-    config.rcc.pll = Some(Pll {
-        source: PLLSource::HSE,
-        prediv: PllPreDiv::DIV1,
-        mul: PllMul::MUL20,
-        divp: None,
-        divq: None,
-        divr: Some(PllRDiv::DIV2), // sysclk 80Mhz clock (8 / 1 * 20 / 2)
-    });
-    config.rcc.ls = LsConfig::default_lse();
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.mux = ClockSrc::PLL1_R;
+        config.rcc.hse = Some(Hse {
+            freq: Hertz::mhz(8),
+            mode: HseMode::Oscillator,
+        });
+        config.rcc.pll = Some(Pll {
+            source: PLLSource::HSE,
+            prediv: PllPreDiv::DIV1,
+            mul: PllMul::MUL20,
+            divp: None,
+            divq: None,
+            divr: Some(PllRDiv::DIV2), // sysclk 80Mhz clock (8 / 1 * 20 / 2)
+        });
+        config.rcc.ls = LsConfig::default_lse();
+    }
     let p = embassy_stm32::init(config);
 
     info!("Hello World!");

examples/stm32l4/src/bin/spe_adin1110_http_server.rs

@@ -48,7 +48,6 @@ use embassy_net_adin1110::{self, Device, Runner, ADIN1110};
 use embedded_hal_bus::spi::ExclusiveDevice;
 use hal::gpio::Pull;
 use hal::i2c::Config as I2C_Config;
-use hal::rcc::{ClockSrc, PLLSource, Pll, PllMul, PllPreDiv, PllRDiv};
 use hal::spi::{Config as SPI_Config, Spi};
 use hal::time::Hertz;
 
@@ -74,20 +73,25 @@ async fn main(spawner: Spawner) {
     defmt::println!("Start main()");
 
     let mut config = embassy_stm32::Config::default();
-
-    // 80Mhz clock (Source: 8 / SrcDiv: 1 * PLLMul 20 / ClkDiv 2)
-    // 80MHz highest frequency for flash 0 wait.
-    config.rcc.mux = ClockSrc::PLL1_R;
-    config.rcc.hse = Some(Hertz::mhz(8));
-    config.rcc.pll = Some(Pll {
-        source: PLLSource::HSE,
-        prediv: PllPreDiv::DIV1,
-        mul: PllMul::MUL20,
-        divp: None,
-        divq: None,
-        divr: Some(PllRDiv::DIV2), // sysclk 80Mhz clock (8 / 1 * 20 / 2)
-    });
-    config.rcc.hsi48 = true; // needed for rng
+    {
+        use embassy_stm32::rcc::*;
+        // 80Mhz clock (Source: 8 / SrcDiv: 1 * PLLMul 20 / ClkDiv 2)
+        // 80MHz highest frequency for flash 0 wait.
+        config.rcc.mux = ClockSrc::PLL1_R;
+        config.rcc.hse = Some(Hse {
+            freq: Hertz::mhz(8),
+            mode: HseMode::Oscillator,
+        });
+        config.rcc.pll = Some(Pll {
+            source: PLLSource::HSE,
+            prediv: PllPreDiv::DIV1,
+            mul: PllMul::MUL20,
+            divp: None,
+            divq: None,
+            divr: Some(PllRDiv::DIV2), // sysclk 80Mhz clock (8 / 1 * 20 / 2)
+        });
+        config.rcc.hsi48 = true; // needed for rng
+    }
 
     let dp = embassy_stm32::init(config);
 

examples/stm32l4/src/bin/usb_serial.rs

@@ -25,7 +25,7 @@ async fn main(_spawner: Spawner) {
     let mut config = Config::default();
     config.rcc.hsi48 = true;
     config.rcc.mux = ClockSrc::PLL1_R;
-    config.rcc.hsi16 = true;
+    config.rcc.hsi = true;
     config.rcc.pll = Some(Pll {
         source: PLLSource::HSI,
         prediv: PllPreDiv::DIV1,

examples/stm32l5/src/bin/rng.rs

@@ -16,7 +16,7 @@ bind_interrupts!(struct Irqs {
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = Config::default();
-    config.rcc.hsi16 = true;
+    config.rcc.hsi = true;
     config.rcc.mux = ClockSrc::PLL1_R;
     config.rcc.pll = Some(Pll {
         // 64Mhz clock (16 / 1 * 8 / 2)

examples/stm32l5/src/bin/usb_ethernet.rs

@@ -45,7 +45,7 @@ async fn net_task(stack: &'static Stack<Device<'static, MTU>>) -> ! {
 #[embassy_executor::main]
 async fn main(spawner: Spawner) {
     let mut config = Config::default();
-    config.rcc.hsi16 = true;
+    config.rcc.hsi = true;
     config.rcc.mux = ClockSrc::PLL1_R;
     config.rcc.pll = Some(Pll {
         // 80Mhz clock (16 / 1 * 10 / 2)

examples/stm32l5/src/bin/usb_hid_mouse.rs

@@ -22,7 +22,7 @@ bind_interrupts!(struct Irqs {
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = Config::default();
-    config.rcc.hsi16 = true;
+    config.rcc.hsi = true;
     config.rcc.mux = ClockSrc::PLL1_R;
     config.rcc.pll = Some(Pll {
         // 80Mhz clock (16 / 1 * 10 / 2)

examples/stm32l5/src/bin/usb_serial.rs

@@ -20,7 +20,7 @@ bind_interrupts!(struct Irqs {
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = Config::default();
-    config.rcc.hsi16 = true;
+    config.rcc.hsi = true;
     config.rcc.mux = ClockSrc::PLL1_R;
     config.rcc.pll = Some(Pll {
         // 80Mhz clock (16 / 1 * 10 / 2)

examples/stm32u5/src/bin/usb_serial.rs

@@ -23,8 +23,8 @@ async fn main(_spawner: Spawner) {
     info!("Hello World!");
 
     let mut config = Config::default();
-    config.rcc.mux = ClockSrc::PLL1R(PllConfig {
-        source: PllSrc::HSI16,
+    config.rcc.mux = ClockSrc::PLL1_R(PllConfig {
+        source: PllSrc::HSI,
         m: Pllm::DIV2,
         n: Plln::MUL10,
         r: Plldiv::DIV1,

examples/stm32wl/src/bin/lora_lorawan.rs

@@ -12,7 +12,8 @@ use embassy_lora::LoraTimer;
 use embassy_stm32::gpio::{Level, Output, Pin, Speed};
 use embassy_stm32::rng::{self, Rng};
 use embassy_stm32::spi::Spi;
-use embassy_stm32::{bind_interrupts, pac, peripherals};
+use embassy_stm32::time::Hertz;
+use embassy_stm32::{bind_interrupts, peripherals};
 use embassy_time::Delay;
 use lora_phy::mod_params::*;
 use lora_phy::sx1261_2::SX1261_2;
@@ -33,11 +34,25 @@ bind_interrupts!(struct Irqs{
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = embassy_stm32::Config::default();
-    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSE;
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.hse = Some(Hse {
+            freq: Hertz(32_000_000),
+            mode: HseMode::Bypass,
+            prescaler: HsePrescaler::DIV1,
+        });
+        config.rcc.mux = ClockSrc::PLL1_R;
+        config.rcc.pll = Some(Pll {
+            source: PLLSource::HSE,
+            prediv: PllPreDiv::DIV2,
+            mul: PllMul::MUL6,
+            divp: None,
+            divq: Some(PllQDiv::DIV2), // PLL1_Q clock (32 / 2 * 6 / 2), used for RNG
+            divr: Some(PllRDiv::DIV2), // sysclk 48Mhz clock (32 / 2 * 6 / 2)
+        });
+    }
     let p = embassy_stm32::init(config);
 
-    pac::RCC.ccipr().modify(|w| w.set_rngsel(0b01));
-
     let spi = Spi::new_subghz(p.SUBGHZSPI, p.DMA1_CH1, p.DMA1_CH2);
 
     // Set CTRL1 and CTRL3 for high-power transmission, while CTRL2 acts as an RF switch between tx and rx

examples/stm32wl/src/bin/lora_p2p_receive.rs

@@ -11,6 +11,7 @@ use embassy_lora::iv::{InterruptHandler, Stm32wlInterfaceVariant};
 use embassy_stm32::bind_interrupts;
 use embassy_stm32::gpio::{Level, Output, Pin, Speed};
 use embassy_stm32::spi::Spi;
+use embassy_stm32::time::Hertz;
 use embassy_time::{Delay, Timer};
 use lora_phy::mod_params::*;
 use lora_phy::sx1261_2::SX1261_2;
@@ -26,7 +27,23 @@ bind_interrupts!(struct Irqs{
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = embassy_stm32::Config::default();
-    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSE;
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.hse = Some(Hse {
+            freq: Hertz(32_000_000),
+            mode: HseMode::Bypass,
+            prescaler: HsePrescaler::DIV1,
+        });
+        config.rcc.mux = ClockSrc::PLL1_R;
+        config.rcc.pll = Some(Pll {
+            source: PLLSource::HSE,
+            prediv: PllPreDiv::DIV2,
+            mul: PllMul::MUL6,
+            divp: None,
+            divq: Some(PllQDiv::DIV2), // PLL1_Q clock (32 / 2 * 6 / 2), used for RNG
+            divr: Some(PllRDiv::DIV2), // sysclk 48Mhz clock (32 / 2 * 6 / 2)
+        });
+    }
     let p = embassy_stm32::init(config);
 
     let spi = Spi::new_subghz(p.SUBGHZSPI, p.DMA1_CH1, p.DMA1_CH2);

examples/stm32wl/src/bin/lora_p2p_send.rs

@@ -11,6 +11,7 @@ use embassy_lora::iv::{InterruptHandler, Stm32wlInterfaceVariant};
 use embassy_stm32::bind_interrupts;
 use embassy_stm32::gpio::{Level, Output, Pin, Speed};
 use embassy_stm32::spi::Spi;
+use embassy_stm32::time::Hertz;
 use embassy_time::Delay;
 use lora_phy::mod_params::*;
 use lora_phy::sx1261_2::SX1261_2;
@@ -26,7 +27,23 @@ bind_interrupts!(struct Irqs{
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = embassy_stm32::Config::default();
-    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSE;
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.hse = Some(Hse {
+            freq: Hertz(32_000_000),
+            mode: HseMode::Bypass,
+            prescaler: HsePrescaler::DIV1,
+        });
+        config.rcc.mux = ClockSrc::PLL1_R;
+        config.rcc.pll = Some(Pll {
+            source: PLLSource::HSE,
+            prediv: PllPreDiv::DIV2,
+            mul: PllMul::MUL6,
+            divp: None,
+            divq: Some(PllQDiv::DIV2), // PLL1_Q clock (32 / 2 * 6 / 2), used for RNG
+            divr: Some(PllRDiv::DIV2), // sysclk 48Mhz clock (32 / 2 * 6 / 2)
+        });
+    }
     let p = embassy_stm32::init(config);
 
     let spi = Spi::new_subghz(p.SUBGHZSPI, p.DMA1_CH1, p.DMA1_CH2);

examples/stm32wl/src/bin/random.rs

@@ -4,9 +4,9 @@
 
 use defmt::*;
 use embassy_executor::Spawner;
-use embassy_stm32::rcc::{ClockSrc, MSIRange};
 use embassy_stm32::rng::{self, Rng};
-use embassy_stm32::{bind_interrupts, pac, peripherals};
+use embassy_stm32::time::Hertz;
+use embassy_stm32::{bind_interrupts, peripherals};
 use {defmt_rtt as _, panic_probe as _};
 
 bind_interrupts!(struct Irqs{
@@ -16,11 +16,25 @@ bind_interrupts!(struct Irqs{
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     let mut config = embassy_stm32::Config::default();
-    config.rcc.mux = ClockSrc::MSI(MSIRange::RANGE32M);
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.hse = Some(Hse {
+            freq: Hertz(32_000_000),
+            mode: HseMode::Bypass,
+            prescaler: HsePrescaler::DIV1,
+        });
+        config.rcc.mux = ClockSrc::PLL1_R;
+        config.rcc.pll = Some(Pll {
+            source: PLLSource::HSE,
+            prediv: PllPreDiv::DIV2,
+            mul: PllMul::MUL6,
+            divp: None,
+            divq: Some(PllQDiv::DIV2), // PLL1_Q clock (32 / 2 * 6 / 2), used for RNG
+            divr: Some(PllRDiv::DIV2), // sysclk 48Mhz clock (32 / 2 * 6 / 2)
+        });
+    }
     let p = embassy_stm32::init(config);
 
-    pac::RCC.ccipr().modify(|w| w.set_rngsel(0b11)); // msi
-
     info!("Hello World!");
 
     let mut rng = Rng::new(p.RNG, Irqs);

examples/stm32wl/src/bin/rtc.rs

@@ -5,20 +5,34 @@
 use chrono::{NaiveDate, NaiveDateTime};
 use defmt::*;
 use embassy_executor::Spawner;
-use embassy_stm32::rcc::{ClockSrc, LsConfig};
 use embassy_stm32::rtc::{Rtc, RtcConfig};
+use embassy_stm32::time::Hertz;
 use embassy_stm32::Config;
 use embassy_time::Timer;
 use {defmt_rtt as _, panic_probe as _};
 
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
-    let p = {
-        let mut config = Config::default();
-        config.rcc.mux = ClockSrc::HSE;
+    let mut config = Config::default();
+    {
+        use embassy_stm32::rcc::*;
         config.rcc.ls = LsConfig::default_lse();
-        embassy_stm32::init(config)
-    };
+        config.rcc.hse = Some(Hse {
+            freq: Hertz(32_000_000),
+            mode: HseMode::Bypass,
+            prescaler: HsePrescaler::DIV1,
+        });
+        config.rcc.mux = ClockSrc::PLL1_R;
+        config.rcc.pll = Some(Pll {
+            source: PLLSource::HSE,
+            prediv: PllPreDiv::DIV2,
+            mul: PllMul::MUL6,
+            divp: None,
+            divq: Some(PllQDiv::DIV2), // PLL1_Q clock (32 / 2 * 6 / 2), used for RNG
+            divr: Some(PllRDiv::DIV2), // sysclk 48Mhz clock (32 / 2 * 6 / 2)
+        });
+    }
+    let p = embassy_stm32::init(config);
     info!("Hello World!");
 
     let now = NaiveDate::from_ymd_opt(2020, 5, 15)

tests/rp/src/bin/adc.rs

@@ -93,6 +93,7 @@ async fn main(_spawner: Spawner) {
         adc.read_many(
             &mut Channel::new_pin(&mut p.PIN_29, Pull::Down),
             &mut low,
+            1,
             &mut p.DMA_CH0,
         )
         .await
@@ -100,12 +101,18 @@ async fn main(_spawner: Spawner) {
         adc.read_many(
             &mut Channel::new_pin(&mut p.PIN_29, Pull::None),
             &mut none,
+            1,
             &mut p.DMA_CH0,
         )
         .await
         .unwrap();
-        adc.read_many_raw(&mut Channel::new_pin(&mut p.PIN_29, Pull::Up), &mut up, &mut p.DMA_CH0)
-            .await;
+        adc.read_many_raw(
+            &mut Channel::new_pin(&mut p.PIN_29, Pull::Up),
+            &mut up,
+            1,
+            &mut p.DMA_CH0,
+        )
+        .await;
         defmt::assert!(low.iter().zip(none.iter()).all(|(l, n)| *l >> 4 < *n as u16));
         defmt::assert!(up.iter().all(|s| s.good()));
         defmt::assert!(none.iter().zip(up.iter()).all(|(n, u)| (*n as u16) < u.value()));
@@ -115,6 +122,7 @@ async fn main(_spawner: Spawner) {
         adc.read_many(
             &mut Channel::new_temp_sensor(&mut p.ADC_TEMP_SENSOR),
             &mut temp,
+            1,
             &mut p.DMA_CH0,
         )
         .await

tests/stm32/Cargo.toml

@@ -12,9 +12,13 @@ stm32g071rb = ["embassy-stm32/stm32g071rb", "not-gpdma", "dac-adc-pin"]
 stm32c031c6 = ["embassy-stm32/stm32c031c6", "not-gpdma"]
 stm32g491re = ["embassy-stm32/stm32g491re", "chrono", "not-gpdma", "rng"]
 stm32h755zi = ["embassy-stm32/stm32h755zi-cm7", "chrono", "not-gpdma", "eth", "dac-adc-pin", "rng"]
+stm32h753zi = ["embassy-stm32/stm32h753zi", "chrono", "not-gpdma", "eth", "rng"]
+stm32h7a3zi = ["embassy-stm32/stm32h7a3zi", "not-gpdma", "rng"]
 stm32wb55rg = ["embassy-stm32/stm32wb55rg", "chrono", "not-gpdma", "ble", "mac" , "rng"]
 stm32h563zi = ["embassy-stm32/stm32h563zi", "chrono", "eth", "rng"]
 stm32u585ai = ["embassy-stm32/stm32u585ai", "chrono", "rng"]
+stm32u5a5zj = ["embassy-stm32/stm32u5a5zj", "chrono", "rng"]
+stm32wba52cg = ["embassy-stm32/stm32wba52cg", "chrono", "rng"]
 stm32l073rz = ["embassy-stm32/stm32l073rz", "not-gpdma", "rng"]
 stm32l152re = ["embassy-stm32/stm32l152re", "chrono", "not-gpdma"]
 stm32l4a6zg = ["embassy-stm32/stm32l4a6zg", "chrono", "not-gpdma", "rng"]

tests/stm32/src/bin/eth.rs

@@ -60,6 +60,8 @@ async fn main(spawner: Spawner) {
     let n = 4;
     #[cfg(feature = "stm32f207zg")]
     let n = 5;
+    #[cfg(feature = "stm32h753zi")]
+    let n = 6;
 
     let mac_addr = [0x00, n, 0xDE, 0xAD, 0xBE, 0xEF];
 

tests/stm32/src/bin/gpio.rs

@@ -217,8 +217,7 @@ async fn main(_spawner: Spawner) {
 }
 
 fn delay() {
-    #[cfg(feature = "stm32h755zi")]
-    cortex_m::asm::delay(10000);
-    #[cfg(not(feature = "stm32h755zi"))]
+    #[cfg(any(feature = "stm32h755zi", feature = "stm32h753zi", feature = "stm32h7a3zi"))]
+    cortex_m::asm::delay(9000);
     cortex_m::asm::delay(1000);
 }

tests/stm32/src/bin/rng.rs

@@ -11,7 +11,12 @@ use embassy_stm32::rng::Rng;
 use embassy_stm32::{bind_interrupts, peripherals, rng};
 use {defmt_rtt as _, panic_probe as _};
 
-#[cfg(any(feature = "stm32l4a6zg", feature = "stm32h755zi", feature = "stm32f429zi"))]
+#[cfg(any(
+    feature = "stm32l4a6zg",
+    feature = "stm32h755zi",
+    feature = "stm32h753zi",
+    feature = "stm32f429zi"
+))]
 bind_interrupts!(struct Irqs {
    HASH_RNG => rng::InterruptHandler<peripherals::RNG>;
 });
@@ -23,6 +28,7 @@ bind_interrupts!(struct Irqs {
     feature = "stm32l4a6zg",
     feature = "stm32l073rz",
     feature = "stm32h755zi",
+    feature = "stm32h753zi",
     feature = "stm32f429zi"
 )))]
 bind_interrupts!(struct Irqs {

tests/stm32/src/bin/stop.rs

@@ -11,7 +11,7 @@ use common::*;
 use cortex_m_rt::entry;
 use embassy_executor::Spawner;
 use embassy_stm32::low_power::{stop_with_rtc, Executor};
-use embassy_stm32::rcc::LsConfig;
+use embassy_stm32::rcc::{low_power_ready, LsConfig};
 use embassy_stm32::rtc::{Rtc, RtcConfig};
 use embassy_stm32::Config;
 use embassy_time::Timer;
@@ -28,6 +28,7 @@ fn main() -> ! {
 async fn task_1() {
     for _ in 0..9 {
         info!("task 1: waiting for 500ms...");
+        defmt::assert!(low_power_ready());
         Timer::after_millis(500).await;
     }
 }
@@ -36,6 +37,7 @@ async fn task_1() {
 async fn task_2() {
     for _ in 0..5 {
         info!("task 2: waiting for 1000ms...");
+        defmt::assert!(low_power_ready());
         Timer::after_millis(1000).await;
     }
 

tests/stm32/src/common.rs

@@ -18,8 +18,14 @@ teleprobe_meta::target!(b"nucleo-stm32f429zi");
 teleprobe_meta::target!(b"nucleo-stm32wb55rg");
 #[cfg(feature = "stm32h755zi")]
 teleprobe_meta::target!(b"nucleo-stm32h755zi");
+#[cfg(feature = "stm32h753zi")]
+teleprobe_meta::target!(b"nucleo-stm32h753zi");
+#[cfg(feature = "stm32h7a3zi")]
+teleprobe_meta::target!(b"nucleo-stm32h7a3zi");
 #[cfg(feature = "stm32u585ai")]
 teleprobe_meta::target!(b"iot-stm32u585ai");
+#[cfg(feature = "stm32u5a5zj")]
+teleprobe_meta::target!(b"nucleo-stm32u5a5zj");
 #[cfg(feature = "stm32h563zi")]
 teleprobe_meta::target!(b"nucleo-stm32h563zi");
 #[cfg(feature = "stm32c031c6")]
@@ -44,6 +50,8 @@ teleprobe_meta::target!(b"nucleo-stm32f303ze");
 teleprobe_meta::target!(b"nucleo-stm32l496zg");
 #[cfg(feature = "stm32wl55jc")]
 teleprobe_meta::target!(b"nucleo-stm32wl55jc");
+#[cfg(feature = "stm32wba52cg")]
+teleprobe_meta::target!(b"nucleo-stm32wba52cg");
 
 macro_rules! define_peris {
     ($($name:ident = $peri:ident,)* $(@irq $irq_name:ident = $irq_code:tt,)*) => {
@@ -105,18 +113,30 @@ define_peris!(
     SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PA7, SPI_MISO = PA6, SPI_TX_DMA = DMA1_CH1, SPI_RX_DMA = DMA1_CH2,
     @irq UART = {LPUART1 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::LPUART1>;},
 );
-#[cfg(feature = "stm32h755zi")]
+#[cfg(any(feature = "stm32h755zi", feature = "stm32h753zi"))]
 define_peris!(
     UART = USART1, UART_TX = PB6, UART_RX = PB7, UART_TX_DMA = DMA1_CH0, UART_RX_DMA = DMA1_CH1,
     SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PB5, SPI_MISO = PA6, SPI_TX_DMA = DMA1_CH0, SPI_RX_DMA = DMA1_CH1,
     @irq UART = {USART1 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART1>;},
 );
+#[cfg(feature = "stm32h7a3zi")]
+define_peris!(
+    UART = USART1, UART_TX = PB6, UART_RX = PB7, UART_TX_DMA = DMA1_CH0, UART_RX_DMA = DMA1_CH1,
+    SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PA7, SPI_MISO = PA6, SPI_TX_DMA = DMA1_CH0, SPI_RX_DMA = DMA1_CH1,
+    @irq UART = {USART1 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART1>;},
+);
 #[cfg(feature = "stm32u585ai")]
 define_peris!(
     UART = USART3, UART_TX = PD8, UART_RX = PD9, UART_TX_DMA = GPDMA1_CH0, UART_RX_DMA = GPDMA1_CH1,
     SPI = SPI1, SPI_SCK = PE13, SPI_MOSI = PE15, SPI_MISO = PE14, SPI_TX_DMA = GPDMA1_CH0, SPI_RX_DMA = GPDMA1_CH1,
     @irq UART = {USART3 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART3>;},
 );
+#[cfg(feature = "stm32u5a5zj")]
+define_peris!(
+    UART = LPUART1, UART_TX = PG7, UART_RX = PG8, UART_TX_DMA = GPDMA1_CH0, UART_RX_DMA = GPDMA1_CH1,
+    SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PA7, SPI_MISO = PA6, SPI_TX_DMA = GPDMA1_CH0, SPI_RX_DMA = GPDMA1_CH1,
+    @irq UART = {LPUART1 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::LPUART1>;},
+);
 #[cfg(feature = "stm32h563zi")]
 define_peris!(
     UART = LPUART1, UART_TX = PB6, UART_RX = PB7, UART_TX_DMA = GPDMA1_CH0, UART_RX_DMA = GPDMA1_CH1,
@@ -189,11 +209,29 @@ define_peris!(
     SPI = SPI1, SPI_SCK = PA5, SPI_MOSI = PA7, SPI_MISO = PA6, SPI_TX_DMA = DMA1_CH3, SPI_RX_DMA = DMA1_CH2,
     @irq UART = {USART1 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::USART1>;},
 );
+#[cfg(feature = "stm32wba52cg")]
+define_peris!(
+    UART = LPUART1, UART_TX = PB5, UART_RX = PA10, UART_TX_DMA = GPDMA1_CH0, UART_RX_DMA = GPDMA1_CH1,
+    SPI = SPI1, SPI_SCK = PB4, SPI_MOSI = PA15, SPI_MISO = PB3, SPI_TX_DMA = GPDMA1_CH0, SPI_RX_DMA = GPDMA1_CH1,
+    @irq UART = {LPUART1 => embassy_stm32::usart::InterruptHandler<embassy_stm32::peripherals::LPUART1>;},
+);
 
 pub fn config() -> Config {
+    // Setting this bit is mandatory to use PG[15:2].
+    #[cfg(feature = "stm32u5a5zj")]
+    embassy_stm32::pac::PWR.svmcr().modify(|w| {
+        w.set_io2sv(true);
+        w.set_io2vmen(true);
+    });
+
     #[allow(unused_mut)]
     let mut config = Config::default();
 
+    #[cfg(feature = "stm32wb55rg")]
+    {
+        config.rcc = embassy_stm32::rcc::WPAN_DEFAULT;
+    }
+
     #[cfg(feature = "stm32f207zg")]
     {
         use embassy_stm32::rcc::*;
@@ -274,7 +312,7 @@ pub fn config() -> Config {
             mode: HseMode::BypassDigital,
         });
         config.rcc.pll1 = Some(Pll {
-            source: PllSource::Hse,
+            source: PllSource::HSE,
             prediv: PllPreDiv::DIV2,
             mul: PllMul::MUL125,
             divp: Some(PllDiv::DIV2),
@@ -285,18 +323,18 @@ pub fn config() -> Config {
         config.rcc.apb1_pre = APBPrescaler::DIV1;
         config.rcc.apb2_pre = APBPrescaler::DIV1;
         config.rcc.apb3_pre = APBPrescaler::DIV1;
-        config.rcc.sys = Sysclk::Pll1P;
+        config.rcc.sys = Sysclk::PLL1_P;
         config.rcc.voltage_scale = VoltageScale::Scale0;
     }
 
-    #[cfg(feature = "stm32h755zi")]
+    #[cfg(any(feature = "stm32h755zi", feature = "stm32h753zi"))]
     {
         use embassy_stm32::rcc::*;
-        config.rcc.hsi = Some(Hsi::Mhz64);
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
         config.rcc.csi = true;
         config.rcc.hsi48 = true; // needed for RNG
-        config.rcc.pll_src = PllSource::Hsi;
         config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV2),
@@ -304,13 +342,14 @@ pub fn config() -> Config {
             divr: None,
         });
         config.rcc.pll2 = Some(Pll {
+            source: PllSource::HSI,
             prediv: PllPreDiv::DIV4,
             mul: PllMul::MUL50,
             divp: Some(PllDiv::DIV8), // 100mhz
             divq: None,
             divr: None,
         });
-        config.rcc.sys = Sysclk::Pll1P; // 400 Mhz
+        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
         config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
         config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
         config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz
@@ -320,18 +359,43 @@ pub fn config() -> Config {
         config.rcc.adc_clock_source = AdcClockSource::PLL2_P;
     }
 
+    #[cfg(any(feature = "stm32h7a3zi"))]
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
+        config.rcc.csi = true;
+        config.rcc.hsi48 = true; // needed for RNG
+        config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
+            prediv: PllPreDiv::DIV4,
+            mul: PllMul::MUL35,
+            divp: Some(PllDiv::DIV2), // 280 Mhz
+            divq: Some(PllDiv::DIV8), // SPI1 cksel defaults to pll1_q
+            divr: None,
+        });
+        config.rcc.pll2 = Some(Pll {
+            source: PllSource::HSI,
+            prediv: PllPreDiv::DIV4,
+            mul: PllMul::MUL35,
+            divp: Some(PllDiv::DIV8), // 70 Mhz
+            divq: None,
+            divr: None,
+        });
+        config.rcc.sys = Sysclk::PLL1_P; // 280 Mhz
+        config.rcc.ahb_pre = AHBPrescaler::DIV1; // 280 Mhz
+        config.rcc.apb1_pre = APBPrescaler::DIV2; // 140 Mhz
+        config.rcc.apb2_pre = APBPrescaler::DIV2; // 140 Mhz
+        config.rcc.apb3_pre = APBPrescaler::DIV2; // 140 Mhz
+        config.rcc.apb4_pre = APBPrescaler::DIV2; // 140 Mhz
+        config.rcc.voltage_scale = VoltageScale::Scale0;
+        config.rcc.adc_clock_source = AdcClockSource::PLL2_P;
+    }
+
     #[cfg(any(feature = "stm32l496zg", feature = "stm32l4a6zg", feature = "stm32l4r5zi"))]
     {
         use embassy_stm32::rcc::*;
-        #[cfg(feature = "stm32l4r5zi")]
-        {
-            config.rcc.mux = ClockSrc::PLL1_R;
-        }
-        #[cfg(not(feature = "stm32l4r5zi"))]
-        {
-            config.rcc.mux = ClockSrc::PLL1_P;
-        }
-        config.rcc.hsi16 = true;
+        config.rcc.mux = ClockSrc::PLL1_R;
+        config.rcc.hsi = true;
         config.rcc.pll = Some(Pll {
             source: PLLSource::HSI,
             prediv: PllPreDiv::DIV1,
@@ -345,16 +409,26 @@ pub fn config() -> Config {
     #[cfg(feature = "stm32wl55jc")]
     {
         use embassy_stm32::rcc::*;
-        config.rcc.mux = ClockSrc::MSI(MSIRange::RANGE32M);
-        embassy_stm32::pac::RCC.ccipr().modify(|w| {
-            w.set_rngsel(0b11); // msi
+        config.rcc.hse = Some(Hse {
+            freq: Hertz(32_000_000),
+            mode: HseMode::Bypass,
+            prescaler: HsePrescaler::DIV1,
+        });
+        config.rcc.mux = ClockSrc::PLL1_R;
+        config.rcc.pll = Some(Pll {
+            source: PLLSource::HSE,
+            prediv: PllPreDiv::DIV2,
+            mul: PllMul::MUL6,
+            divp: None,
+            divq: Some(PllQDiv::DIV2), // PLL1_Q clock (32 / 2 * 6 / 2), used for RNG
+            divr: Some(PllRDiv::DIV2), // sysclk 48Mhz clock (32 / 2 * 6 / 2)
         });
     }
 
     #[cfg(any(feature = "stm32l552ze"))]
     {
         use embassy_stm32::rcc::*;
-        config.rcc.hsi16 = true;
+        config.rcc.hsi = true;
         config.rcc.mux = ClockSrc::PLL1_R;
         config.rcc.pll = Some(Pll {
             // 110Mhz clock (16 / 4 * 55 / 2)
@@ -367,18 +441,28 @@ pub fn config() -> Config {
         });
     }
 
-    #[cfg(feature = "stm32u585ai")]
+    #[cfg(any(feature = "stm32u585ai", feature = "stm32u5a5zj"))]
     {
         use embassy_stm32::rcc::*;
         config.rcc.mux = ClockSrc::MSI(Msirange::RANGE_48MHZ);
     }
 
+    #[cfg(feature = "stm32wba52cg")]
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.mux = ClockSrc::HSI;
+
+        embassy_stm32::pac::RCC.ccipr2().write(|w| {
+            w.set_rngsel(embassy_stm32::pac::rcc::vals::Rngsel::HSI);
+        });
+    }
+
     #[cfg(feature = "stm32l073rz")]
     {
         use embassy_stm32::rcc::*;
         config.rcc.mux = ClockSrc::PLL(
             // 32Mhz clock (16 * 4 / 2)
-            PLLSource::HSI16,
+            PLLSource::HSI,
             PLLMul::MUL4,
             PLLDiv::DIV2,
         );
@@ -389,7 +473,7 @@ pub fn config() -> Config {
         use embassy_stm32::rcc::*;
         config.rcc.mux = ClockSrc::PLL(
             // 32Mhz clock (16 * 4 / 2)
-            PLLSource::HSI16,
+            PLLSource::HSI,
             PLLMul::MUL4,
             PLLDiv::DIV2,
         );