Update embedded-(hal,io,nal).

(FAQ): How to fix issues with multiple crate versions

ci.sh

@@ -190,6 +190,7 @@ cargo batch  \
     --- build --release --manifest-path examples/wasm/Cargo.toml --target wasm32-unknown-unknown --out-dir out/examples/wasm \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7m-none-eabi --features stm32f103c8 --out-dir out/tests/stm32f103c8 \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f429zi --out-dir out/tests/stm32f429zi \
+    --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32f446re --out-dir out/tests/stm32f446re \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv7em-none-eabi --features stm32g491re --out-dir out/tests/stm32g491re \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32g071rb --out-dir out/tests/stm32g071rb \
     --- build --release --manifest-path tests/stm32/Cargo.toml --target thumbv6m-none-eabi --features stm32c031c6 --out-dir out/tests/stm32c031c6 \
@@ -220,6 +221,8 @@ cargo batch  \
 rm out/tests/stm32wb55rg/wpan_mac
 rm out/tests/stm32wb55rg/wpan_ble
 
+# not in CI yet.
+rm -rf out/tests/stm32f446re
 
 # unstable, I think it's running out of RAM?
 rm out/tests/stm32f207zg/eth

cyw43/Cargo.toml

@@ -23,7 +23,7 @@ cortex-m = "0.7.6"
 cortex-m-rt = "0.7.0"
 futures = { version = "0.3.17", default-features = false, features = ["async-await", "cfg-target-has-atomic", "unstable"] }
 
-embedded-hal-1 = { package = "embedded-hal", version = "1.0.0-rc.1" }
+embedded-hal-1 = { package = "embedded-hal", version = "1.0.0-rc.2" }
 num_enum = { version = "0.5.7", default-features = false }
 
 [package.metadata.embassy_docs]

cyw43/src/lib.rs

@@ -1,6 +1,6 @@
 #![no_std]
 #![no_main]
-#![feature(async_fn_in_trait, type_alias_impl_trait, concat_bytes)]
+#![feature(async_fn_in_trait, type_alias_impl_trait)]
 #![allow(stable_features, unknown_lints, async_fn_in_trait)]
 #![deny(unused_must_use)]
 

cyw43/src/nvram.rs

@@ -1,54 +1,48 @@
-macro_rules! nvram {
-    ($($s:literal,)*) => {
-        concat_bytes!($($s, b"\x00",)* b"\x00\x00")
-    };
-}
-
-pub static NVRAM: &'static [u8] = &*nvram!(
-    b"NVRAMRev=$Rev$",
-    b"manfid=0x2d0",
-    b"prodid=0x0727",
-    b"vendid=0x14e4",
-    b"devid=0x43e2",
-    b"boardtype=0x0887",
-    b"boardrev=0x1100",
-    b"boardnum=22",
-    b"macaddr=00:A0:50:b5:59:5e",
-    b"sromrev=11",
-    b"boardflags=0x00404001",
-    b"boardflags3=0x04000000",
-    b"xtalfreq=37400",
-    b"nocrc=1",
-    b"ag0=255",
-    b"aa2g=1",
-    b"ccode=ALL",
-    b"pa0itssit=0x20",
-    b"extpagain2g=0",
-    b"pa2ga0=-168,6649,-778",
-    b"AvVmid_c0=0x0,0xc8",
-    b"cckpwroffset0=5",
-    b"maxp2ga0=84",
-    b"txpwrbckof=6",
-    b"cckbw202gpo=0",
-    b"legofdmbw202gpo=0x66111111",
-    b"mcsbw202gpo=0x77711111",
-    b"propbw202gpo=0xdd",
-    b"ofdmdigfilttype=18",
-    b"ofdmdigfilttypebe=18",
-    b"papdmode=1",
-    b"papdvalidtest=1",
-    b"pacalidx2g=45",
-    b"papdepsoffset=-30",
-    b"papdendidx=58",
-    b"ltecxmux=0",
-    b"ltecxpadnum=0x0102",
-    b"ltecxfnsel=0x44",
-    b"ltecxgcigpio=0x01",
-    b"il0macaddr=00:90:4c:c5:12:38",
-    b"wl0id=0x431b",
-    b"deadman_to=0xffffffff",
-    b"muxenab=0x100",
-    b"spurconfig=0x3",
-    b"glitch_based_crsmin=1",
-    b"btc_mode=1",
-);
+pub static NVRAM: &'static [u8] = b"
+    NVRAMRev=$Rev$\x00\
+    manfid=0x2d0\x00\
+    prodid=0x0727\x00\
+    vendid=0x14e4\x00\
+    devid=0x43e2\x00\
+    boardtype=0x0887\x00\
+    boardrev=0x1100\x00\
+    boardnum=22\x00\
+    macaddr=00:A0:50:b5:59:5e\x00\
+    sromrev=11\x00\
+    boardflags=0x00404001\x00\
+    boardflags3=0x04000000\x00\
+    xtalfreq=37400\x00\
+    nocrc=1\x00\
+    ag0=255\x00\
+    aa2g=1\x00\
+    ccode=ALL\x00\
+    pa0itssit=0x20\x00\
+    extpagain2g=0\x00\
+    pa2ga0=-168,6649,-778\x00\
+    AvVmid_c0=0x0,0xc8\x00\
+    cckpwroffset0=5\x00\
+    maxp2ga0=84\x00\
+    txpwrbckof=6\x00\
+    cckbw202gpo=0\x00\
+    legofdmbw202gpo=0x66111111\x00\
+    mcsbw202gpo=0x77711111\x00\
+    propbw202gpo=0xdd\x00\
+    ofdmdigfilttype=18\x00\
+    ofdmdigfilttypebe=18\x00\
+    papdmode=1\x00\
+    papdvalidtest=1\x00\
+    pacalidx2g=45\x00\
+    papdepsoffset=-30\x00\
+    papdendidx=58\x00\
+    ltecxmux=0\x00\
+    ltecxpadnum=0x0102\x00\
+    ltecxfnsel=0x44\x00\
+    ltecxgcigpio=0x01\x00\
+    il0macaddr=00:90:4c:c5:12:38\x00\
+    wl0id=0x431b\x00\
+    deadman_to=0xffffffff\x00\
+    muxenab=0x100\x00\
+    spurconfig=0x3\x00\
+    glitch_based_crsmin=1\x00\
+    btc_mode=1\x00\
+    \x00";

docs/modules/ROOT/nav.adoc

@@ -1,5 +1,6 @@
 * xref:getting_started.adoc[Getting started]
 ** xref:basic_application.adoc[Basic application]
+** xref:project_structure.adoc[Project Structure]
 * xref:layer_by_layer.adoc[Bare metal to async]
 * xref:runtime.adoc[Executor]
 * xref:hal.adoc[HAL]

docs/modules/ROOT/pages/faq.adoc

@@ -36,3 +36,102 @@ For Cortex-M targets, consider making sure that ALL of the following features ar
 * `nightly`
 
 For Xtensa ESP32, consider using the executors and `#[main]` macro provided by your appropriate link:https://crates.io/crates/esp-hal-common[HAL crate].
+
+== Why is my binary so big?
+
+The first step to managing your binary size is to set up your link:https://doc.rust-lang.org/cargo/reference/profiles.html[profiles].
+
+[source,toml]
+----
+[profile.release]
+debug = false
+lto = true
+opt-level = "s"
+incremental = true
+----
+
+All of these flags are elaborated on in the Rust Book page linked above.
+
+=== My binary is still big... filled with `std::fmt` stuff!
+
+This means your code is sufficiently complex that `panic!` invocation's formatting requirements could not be optimized out, despite your usage of `panic-halt` or `panic-reset`.
+
+You can remedy this by adding the following to your `.cargo/config.toml`:
+
+[source,toml]
+----
+[unstable]
+build-std = ["core"]
+build-std-features = ["panic_immediate_abort"]
+----
+
+This replaces all panics with a `UDF` (undefined) instruction.
+
+Depending on your chipset, this will exhibit different behavior.
+
+Refer to the spec for your chipset, but for `thumbv6m`, it results in a hardfault. Which can be configured like so:
+
+[source,rust]
+----
+#[exception]
+unsafe fn HardFault(_frame: &ExceptionFrame) -> ! {
+    SCB::sys_reset() // <- you could do something other than reset
+}
+----
+
+Refer to cortex-m's link:https://docs.rs/cortex-m-rt/latest/cortex_m_rt/attr.exception.html[exception handling] for more info.
+
+== `embassy-time` throws linker errors
+
+If you see linker error like this:
+
+[source,text]
+----
+  = note: rust-lld: error: undefined symbol: _embassy_time_now
+          >>> referenced by driver.rs:127 (src/driver.rs:127)
+          >>>               embassy_time-846f66f1620ad42c.embassy_time.4f6a638abb75dd4c-cgu.0.rcgu.o:(embassy_time::driver::now::hefb1f99d6e069842) in archive Devel/Embedded/pogodyna/target/thumbv7em-none-eabihf/debug/deps/libembassy_time-846f66f1620ad42c.rlib
+
+          rust-lld: error: undefined symbol: _embassy_time_allocate_alarm
+          >>> referenced by driver.rs:134 (src/driver.rs:134)
+          >>>               embassy_time-846f66f1620ad42c.embassy_time.4f6a638abb75dd4c-cgu.0.rcgu.o:(embassy_time::driver::allocate_alarm::hf5145b6bd46706b2) in archive Devel/Embedded/pogodyna/target/thumbv7em-none-eabihf/debug/deps/libembassy_time-846f66f1620ad42c.rlib
+
+          rust-lld: error: undefined symbol: _embassy_time_set_alarm_callback
+          >>> referenced by driver.rs:139 (src/driver.rs:139)
+          >>>               embassy_time-846f66f1620ad42c.embassy_time.4f6a638abb75dd4c-cgu.0.rcgu.o:(embassy_time::driver::set_alarm_callback::h24f92388d96eafd2) in archive Devel/Embedded/pogodyna/target/thumbv7em-none-eabihf/debug/deps/libembassy_time-846f66f1620ad42c.rlib
+
+          rust-lld: error: undefined symbol: _embassy_time_set_alarm
+          >>> referenced by driver.rs:144 (src/driver.rs:144)
+          >>>               embassy_time-846f66f1620ad42c.embassy_time.4f6a638abb75dd4c-cgu.0.rcgu.o:(embassy_time::driver::set_alarm::h530a5b1f444a6d5b) in archive Devel/Embedded/pogodyna/target/thumbv7em-none-eabihf/debug/deps/libembassy_time-846f66f1620ad42c.rlib
+----
+
+You probably need to enable a time driver for your HAL (not in `embassy-time`!). For example with `embassy-stm32`, you might need to enable `time-driver-any`:
+
+[source,toml]
+----
+[dependencies.embassy-stm32]
+version = "0.1.0"
+features = [
+    # ...
+    "time-driver-any", # Add this line!
+    # ...
+]
+----
+
+== Error: `Only one package in the dependency graph may specify the same links value.`
+
+You have multiple versions of the same crate in your dependency tree. This means that some of your
+embassy crates are coming from crates.io, and some from git, each of them pulling in a different set
+of dependencies.
+
+To resolve this issue, make sure to only use a single source for all your embassy crates! To do this,
+you should patch your dependencies to use git sources using `[patch.crates.io]` and maybe `[patch.'https://github.com/embassy-rs/embassy.git']`.
+
+Example:
+
+[source,toml]
+----
+[patch.crates-io]
+embassy-time = { git = "https://github.com/embassy-rs/embassy.git", rev = "e5fdd35" }
+----
+
+Note that the git revision should match any other embassy patches or git dependencies that you are using!

docs/modules/ROOT/pages/project_structure.adoc

@@ -0,0 +1,80 @@
+= Project Structure
+
+There are many ways to configure embassy and its components for your exact application. The link:https://github.com/embassy-rs/embassy/tree/main/examples[examples] directory for each chipset demonstrates how your project structure should look. Let's break it down:
+
+The toplevel file structure of your project should look like this:
+[source,plain]
+----
+{} = Maybe
+
+my-project
+|- .cargo
+|  |- config.toml
+|- src
+|  |- main.rs
+|- build.rs
+|- Cargo.toml
+|- {memory.x}
+|- rust-toolchain.toml
+----
+
+=== .cargo/config.toml
+
+This directory/file describes what platform you're on, and configures link:https://github.com/probe-rs/probe-rs[probe-rs] to deploy to your device.
+
+Here is a minimal example:
+
+[source,toml]
+----
+[target.thumbv6m-none-eabi] # <-change for your platform
+runner = 'probe-rs run --chip STM32F031K6Tx' # <- change for your chip
+
+[build]
+target = "thumbv6m-none-eabi" # <-change for your platform
+
+[env]
+DEFMT_LOG = "trace" # <- can change to info, warn, or error
+----
+
+=== build.rs
+
+This is the build script for your project. It links defmt (what is defmt?) and the `memory.x` file if needed. This file is pretty specific for each chipset, just copy and paste from the corresponding link:https://github.com/embassy-rs/embassy/tree/main/examples[example].
+
+=== Cargo.toml
+
+This is your manifest file, where you can configure all of the embassy components to use the features you need.
+
+TODO: someone should exhaustively describe every feature for every component!
+
+=== memory.x
+
+This file outlines the flash/ram usage of your program. It is especially useful when using link:https://github.com/embassy-rs/nrf-softdevice[nrf-softdevice] on an nRF5x.
+
+Here is an example for using S140 with an nRF52840:
+
+[source,x]
+----
+MEMORY
+{
+  /* NOTE 1 K = 1 KiBi = 1024 bytes */
+  /* These values correspond to the NRF52840 with Softdevices S140 7.0.1 */
+  FLASH : ORIGIN = 0x00027000, LENGTH = 868K
+  RAM : ORIGIN = 0x20020000, LENGTH = 128K
+}
+----
+
+=== rust-toolchain.toml
+
+This file configures the rust version and configuration to use.
+
+A minimal example:
+
+[source,toml]
+----
+[toolchain]
+channel = "nightly-2023-08-19" # <- as of writing, this is the exact rust version embassy uses
+components = [ "rust-src", "rustfmt" ] # <- optionally add "llvm-tools-preview" for some extra features like "cargo size"
+targets = [
+    "thumbv6m-none-eabi" # <-change for your platform
+]
+----

embassy-embedded-hal/Cargo.toml

@@ -25,8 +25,8 @@ embassy-time = { version = "0.1.5", path = "../embassy-time", optional = true }
 embedded-hal-02 = { package = "embedded-hal", version = "0.2.6", features = [
     "unproven",
 ] }
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.1" }
-embedded-hal-async = { version = "=1.0.0-rc.1", optional = true }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
+embedded-hal-async = { version = "=1.0.0-rc.2", optional = true }
 embedded-storage = "0.3.0"
 embedded-storage-async = { version = "0.4.0", optional = true }
 nb = "1.0.0"

embassy-embedded-hal/src/lib.rs

@@ -1,5 +1,5 @@
 #![cfg_attr(not(feature = "std"), no_std)]
-#![cfg_attr(feature = "nightly", feature(async_fn_in_trait, impl_trait_projections, try_blocks))]
+#![cfg_attr(feature = "nightly", feature(async_fn_in_trait, impl_trait_projections))]
 #![cfg_attr(feature = "nightly", allow(stable_features, unknown_lints, async_fn_in_trait))]
 #![warn(missing_docs)]
 

embassy-embedded-hal/src/shared_bus/asynch/spi.rs

@@ -63,22 +63,36 @@ where
     CS: OutputPin,
 {
     async fn transaction(&mut self, operations: &mut [spi::Operation<'_, u8>]) -> Result<(), Self::Error> {
+        if cfg!(not(feature = "time")) && operations.iter().any(|op| matches!(op, Operation::DelayNs(_))) {
+            return Err(SpiDeviceError::DelayNotSupported);
+        }
+
         let mut bus = self.bus.lock().await;
         self.cs.set_low().map_err(SpiDeviceError::Cs)?;
 
-        let op_res: Result<(), BUS::Error> = try {
+        let op_res = 'ops: {
             for op in operations {
-                match op {
-                    Operation::Read(buf) => bus.read(buf).await?,
-                    Operation::Write(buf) => bus.write(buf).await?,
-                    Operation::Transfer(read, write) => bus.transfer(read, write).await?,
-                    Operation::TransferInPlace(buf) => bus.transfer_in_place(buf).await?,
+                let res = match op {
+                    Operation::Read(buf) => bus.read(buf).await,
+                    Operation::Write(buf) => bus.write(buf).await,
+                    Operation::Transfer(read, write) => bus.transfer(read, write).await,
+                    Operation::TransferInPlace(buf) => bus.transfer_in_place(buf).await,
                     #[cfg(not(feature = "time"))]
-                    Operation::DelayUs(_) => return Err(SpiDeviceError::DelayUsNotSupported),
+                    Operation::DelayNs(_) => unreachable!(),
                     #[cfg(feature = "time")]
-                    Operation::DelayUs(us) => embassy_time::Timer::after_micros(*us as _).await,
+                    Operation::DelayNs(ns) => match bus.flush().await {
+                        Err(e) => Err(e),
+                        Ok(()) => {
+                            embassy_time::Timer::after_nanos(*ns as _).await;
+                            Ok(())
+                        }
+                    },
+                };
+                if let Err(e) = res {
+                    break 'ops Err(e);
                 }
             }
+            Ok(())
         };
 
         // On failure, it's important to still flush and deassert CS.
@@ -127,23 +141,37 @@ where
     CS: OutputPin,
 {
     async fn transaction(&mut self, operations: &mut [spi::Operation<'_, u8>]) -> Result<(), Self::Error> {
+        if cfg!(not(feature = "time")) && operations.iter().any(|op| matches!(op, Operation::DelayNs(_))) {
+            return Err(SpiDeviceError::DelayNotSupported);
+        }
+
         let mut bus = self.bus.lock().await;
         bus.set_config(&self.config).map_err(|_| SpiDeviceError::Config)?;
         self.cs.set_low().map_err(SpiDeviceError::Cs)?;
 
-        let op_res: Result<(), BUS::Error> = try {
+        let op_res = 'ops: {
             for op in operations {
-                match op {
-                    Operation::Read(buf) => bus.read(buf).await?,
-                    Operation::Write(buf) => bus.write(buf).await?,
-                    Operation::Transfer(read, write) => bus.transfer(read, write).await?,
-                    Operation::TransferInPlace(buf) => bus.transfer_in_place(buf).await?,
+                let res = match op {
+                    Operation::Read(buf) => bus.read(buf).await,
+                    Operation::Write(buf) => bus.write(buf).await,
+                    Operation::Transfer(read, write) => bus.transfer(read, write).await,
+                    Operation::TransferInPlace(buf) => bus.transfer_in_place(buf).await,
                     #[cfg(not(feature = "time"))]
-                    Operation::DelayUs(_) => return Err(SpiDeviceError::DelayUsNotSupported),
+                    Operation::DelayNs(_) => unreachable!(),
                     #[cfg(feature = "time")]
-                    Operation::DelayUs(us) => embassy_time::Timer::after_micros(*us as _).await,
+                    Operation::DelayNs(ns) => match bus.flush().await {
+                        Err(e) => Err(e),
+                        Ok(()) => {
+                            embassy_time::Timer::after_nanos(*ns as _).await;
+                            Ok(())
+                        }
+                    },
+                };
+                if let Err(e) = res {
+                    break 'ops Err(e);
                 }
             }
+            Ok(())
         };
 
         // On failure, it's important to still flush and deassert CS.

embassy-embedded-hal/src/shared_bus/blocking/spi.rs

@@ -55,6 +55,10 @@ where
     CS: OutputPin,
 {
     fn transaction(&mut self, operations: &mut [Operation<'_, u8>]) -> Result<(), Self::Error> {
+        if cfg!(not(feature = "time")) && operations.iter().any(|op| matches!(op, Operation::DelayNs(_))) {
+            return Err(SpiDeviceError::DelayNotSupported);
+        }
+
         self.bus.lock(|bus| {
             let mut bus = bus.borrow_mut();
             self.cs.set_low().map_err(SpiDeviceError::Cs)?;
@@ -65,10 +69,10 @@ where
                 Operation::Transfer(read, write) => bus.transfer(read, write),
                 Operation::TransferInPlace(buf) => bus.transfer_in_place(buf),
                 #[cfg(not(feature = "time"))]
-                Operation::DelayUs(_) => Err(SpiDeviceError::DelayUsNotSupported),
+                Operation::DelayNs(_) => unreachable!(),
                 #[cfg(feature = "time")]
-                Operation::DelayUs(us) => {
-                    embassy_time::block_for(embassy_time::Duration::from_micros(*us as _));
+                Operation::DelayNs(ns) => {
+                    embassy_time::block_for(embassy_time::Duration::from_nanos(*ns as _));
                     Ok(())
                 }
             });
@@ -161,6 +165,10 @@ where
     CS: OutputPin,
 {
     fn transaction(&mut self, operations: &mut [Operation<'_, u8>]) -> Result<(), Self::Error> {
+        if cfg!(not(feature = "time")) && operations.iter().any(|op| matches!(op, Operation::DelayNs(_))) {
+            return Err(SpiDeviceError::DelayNotSupported);
+        }
+
         self.bus.lock(|bus| {
             let mut bus = bus.borrow_mut();
             bus.set_config(&self.config).map_err(|_| SpiDeviceError::Config)?;
@@ -172,10 +180,10 @@ where
                 Operation::Transfer(read, write) => bus.transfer(read, write),
                 Operation::TransferInPlace(buf) => bus.transfer_in_place(buf),
                 #[cfg(not(feature = "time"))]
-                Operation::DelayUs(_) => Err(SpiDeviceError::DelayUsNotSupported),
+                Operation::DelayNs(_) => unreachable!(),
                 #[cfg(feature = "time")]
-                Operation::DelayUs(us) => {
-                    embassy_time::block_for(embassy_time::Duration::from_micros(*us as _));
+                Operation::DelayNs(ns) => {
+                    embassy_time::block_for(embassy_time::Duration::from_nanos(*ns as _));
                     Ok(())
                 }
             });

embassy-embedded-hal/src/shared_bus/mod.rs

@@ -39,8 +39,8 @@ pub enum SpiDeviceError<BUS, CS> {
     Spi(BUS),
     /// Setting the value of the Chip Select (CS) pin failed.
     Cs(CS),
-    /// DelayUs operations are not supported when the `time` Cargo feature is not enabled.
-    DelayUsNotSupported,
+    /// Delay operations are not supported when the `time` Cargo feature is not enabled.
+    DelayNotSupported,
     /// The SPI bus could not be configured.
     Config,
 }
@@ -54,7 +54,7 @@ where
         match self {
             Self::Spi(e) => e.kind(),
             Self::Cs(_) => spi::ErrorKind::Other,
-            Self::DelayUsNotSupported => spi::ErrorKind::Other,
+            Self::DelayNotSupported => spi::ErrorKind::Other,
             Self::Config => spi::ErrorKind::Other,
         }
     }

embassy-lora/Cargo.toml

@@ -1,31 +0,0 @@
-[package]
-name = "embassy-lora"
-version = "0.1.0"
-edition = "2021"
-license = "MIT OR Apache-2.0"
-
-[package.metadata.embassy_docs]
-src_base = "https://github.com/embassy-rs/embassy/blob/embassy-lora-v$VERSION/embassy-lora/src/"
-src_base_git = "https://github.com/embassy-rs/embassy/blob/$COMMIT/embassy-lora/src/"
-features = ["stm32wl", "embassy-stm32?/stm32wl55jc-cm4", "embassy-stm32?/unstable-pac", "time", "defmt"]
-target = "thumbv7em-none-eabi"
-
-[features]
-stm32wl = ["dep:embassy-stm32"]
-time = ["embassy-time", "lorawan-device"]
-defmt = ["dep:defmt", "lorawan-device/defmt"]
-
-[dependencies]
-
-defmt = { version = "0.3", optional = true }
-log = { version = "0.4.14", optional = true }
-
-embassy-time = { version = "0.1.5", path = "../embassy-time", optional = true }
-embassy-sync = { version = "0.4.0", path = "../embassy-sync" }
-embassy-stm32 = { version = "0.1.0", path = "../embassy-stm32", default-features = false, optional = true }
-embedded-hal-async = { version = "=1.0.0-rc.1" }
-embedded-hal = { version = "0.2", features = ["unproven"] }
-
-futures = { version = "0.3.17", default-features = false, features = [ "async-await" ] }
-lora-phy = { version = "2" }
-lorawan-device = { version = "0.11.0", default-features = false, features = ["async"], optional = true }

embassy-lora/src/fmt.rs

@@ -1,258 +0,0 @@
-#![macro_use]
-#![allow(unused_macros)]
-
-use core::fmt::{Debug, Display, LowerHex};
-
-#[cfg(all(feature = "defmt", feature = "log"))]
-compile_error!("You may not enable both `defmt` and `log` features.");
-
-macro_rules! assert {
-    ($($x:tt)*) => {
-        {
-            #[cfg(not(feature = "defmt"))]
-            ::core::assert!($($x)*);
-            #[cfg(feature = "defmt")]
-            ::defmt::assert!($($x)*);
-        }
-    };
-}
-
-macro_rules! assert_eq {
-    ($($x:tt)*) => {
-        {
-            #[cfg(not(feature = "defmt"))]
-            ::core::assert_eq!($($x)*);
-            #[cfg(feature = "defmt")]
-            ::defmt::assert_eq!($($x)*);
-        }
-    };
-}
-
-macro_rules! assert_ne {
-    ($($x:tt)*) => {
-        {
-            #[cfg(not(feature = "defmt"))]
-            ::core::assert_ne!($($x)*);
-            #[cfg(feature = "defmt")]
-            ::defmt::assert_ne!($($x)*);
-        }
-    };
-}
-
-macro_rules! debug_assert {
-    ($($x:tt)*) => {
-        {
-            #[cfg(not(feature = "defmt"))]
-            ::core::debug_assert!($($x)*);
-            #[cfg(feature = "defmt")]
-            ::defmt::debug_assert!($($x)*);
-        }
-    };
-}
-
-macro_rules! debug_assert_eq {
-    ($($x:tt)*) => {
-        {
-            #[cfg(not(feature = "defmt"))]
-            ::core::debug_assert_eq!($($x)*);
-            #[cfg(feature = "defmt")]
-            ::defmt::debug_assert_eq!($($x)*);
-        }
-    };
-}
-
-macro_rules! debug_assert_ne {
-    ($($x:tt)*) => {
-        {
-            #[cfg(not(feature = "defmt"))]
-            ::core::debug_assert_ne!($($x)*);
-            #[cfg(feature = "defmt")]
-            ::defmt::debug_assert_ne!($($x)*);
-        }
-    };
-}
-
-macro_rules! todo {
-    ($($x:tt)*) => {
-        {
-            #[cfg(not(feature = "defmt"))]
-            ::core::todo!($($x)*);
-            #[cfg(feature = "defmt")]
-            ::defmt::todo!($($x)*);
-        }
-    };
-}
-
-#[cfg(not(feature = "defmt"))]
-macro_rules! unreachable {
-    ($($x:tt)*) => {
-        ::core::unreachable!($($x)*)
-    };
-}
-
-#[cfg(feature = "defmt")]
-macro_rules! unreachable {
-    ($($x:tt)*) => {
-        ::defmt::unreachable!($($x)*)
-    };
-}
-
-macro_rules! panic {
-    ($($x:tt)*) => {
-        {
-            #[cfg(not(feature = "defmt"))]
-            ::core::panic!($($x)*);
-            #[cfg(feature = "defmt")]
-            ::defmt::panic!($($x)*);
-        }
-    };
-}
-
-macro_rules! trace {
-    ($s:literal $(, $x:expr)* $(,)?) => {
-        {
-            #[cfg(feature = "log")]
-            ::log::trace!($s $(, $x)*);
-            #[cfg(feature = "defmt")]
-            ::defmt::trace!($s $(, $x)*);
-            #[cfg(not(any(feature = "log", feature="defmt")))]
-            let _ = ($( & $x ),*);
-        }
-    };
-}
-
-macro_rules! debug {
-    ($s:literal $(, $x:expr)* $(,)?) => {
-        {
-            #[cfg(feature = "log")]
-            ::log::debug!($s $(, $x)*);
-            #[cfg(feature = "defmt")]
-            ::defmt::debug!($s $(, $x)*);
-            #[cfg(not(any(feature = "log", feature="defmt")))]
-            let _ = ($( & $x ),*);
-        }
-    };
-}
-
-macro_rules! info {
-    ($s:literal $(, $x:expr)* $(,)?) => {
-        {
-            #[cfg(feature = "log")]
-            ::log::info!($s $(, $x)*);
-            #[cfg(feature = "defmt")]
-            ::defmt::info!($s $(, $x)*);
-            #[cfg(not(any(feature = "log", feature="defmt")))]
-            let _ = ($( & $x ),*);
-        }
-    };
-}
-
-macro_rules! warn {
-    ($s:literal $(, $x:expr)* $(,)?) => {
-        {
-            #[cfg(feature = "log")]
-            ::log::warn!($s $(, $x)*);
-            #[cfg(feature = "defmt")]
-            ::defmt::warn!($s $(, $x)*);
-            #[cfg(not(any(feature = "log", feature="defmt")))]
-            let _ = ($( & $x ),*);
-        }
-    };
-}
-
-macro_rules! error {
-    ($s:literal $(, $x:expr)* $(,)?) => {
-        {
-            #[cfg(feature = "log")]
-            ::log::error!($s $(, $x)*);
-            #[cfg(feature = "defmt")]
-            ::defmt::error!($s $(, $x)*);
-            #[cfg(not(any(feature = "log", feature="defmt")))]
-            let _ = ($( & $x ),*);
-        }
-    };
-}
-
-#[cfg(feature = "defmt")]
-macro_rules! unwrap {
-    ($($x:tt)*) => {
-        ::defmt::unwrap!($($x)*)
-    };
-}
-
-#[cfg(not(feature = "defmt"))]
-macro_rules! unwrap {
-    ($arg:expr) => {
-        match $crate::fmt::Try::into_result($arg) {
-            ::core::result::Result::Ok(t) => t,
-            ::core::result::Result::Err(e) => {
-                ::core::panic!("unwrap of `{}` failed: {:?}", ::core::stringify!($arg), e);
-            }
-        }
-    };
-    ($arg:expr, $($msg:expr),+ $(,)? ) => {
-        match $crate::fmt::Try::into_result($arg) {
-            ::core::result::Result::Ok(t) => t,
-            ::core::result::Result::Err(e) => {
-                ::core::panic!("unwrap of `{}` failed: {}: {:?}", ::core::stringify!($arg), ::core::format_args!($($msg,)*), e);
-            }
-        }
-    }
-}
-
-#[derive(Debug, Copy, Clone, Eq, PartialEq)]
-pub struct NoneError;
-
-pub trait Try {
-    type Ok;
-    type Error;
-    fn into_result(self) -> Result<Self::Ok, Self::Error>;
-}
-
-impl<T> Try for Option<T> {
-    type Ok = T;
-    type Error = NoneError;
-
-    #[inline]
-    fn into_result(self) -> Result<T, NoneError> {
-        self.ok_or(NoneError)
-    }
-}
-
-impl<T, E> Try for Result<T, E> {
-    type Ok = T;
-    type Error = E;
-
-    #[inline]
-    fn into_result(self) -> Self {
-        self
-    }
-}
-
-#[allow(unused)]
-pub(crate) struct Bytes<'a>(pub &'a [u8]);
-
-impl<'a> Debug for Bytes<'a> {
-    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
-        write!(f, "{:#02x?}", self.0)
-    }
-}
-
-impl<'a> Display for Bytes<'a> {
-    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
-        write!(f, "{:#02x?}", self.0)
-    }
-}
-
-impl<'a> LowerHex for Bytes<'a> {
-    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
-        write!(f, "{:#02x?}", self.0)
-    }
-}
-
-#[cfg(feature = "defmt")]
-impl<'a> defmt::Format for Bytes<'a> {
-    fn format(&self, fmt: defmt::Formatter) {
-        defmt::write!(fmt, "{:02x}", self.0)
-    }
-}

embassy-lora/src/iv.rs

@@ -1,317 +0,0 @@
-#[cfg(feature = "stm32wl")]
-use embassy_stm32::interrupt;
-#[cfg(feature = "stm32wl")]
-use embassy_stm32::interrupt::InterruptExt;
-#[cfg(feature = "stm32wl")]
-use embassy_stm32::pac;
-#[cfg(feature = "stm32wl")]
-use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex;
-#[cfg(feature = "stm32wl")]
-use embassy_sync::signal::Signal;
-use embedded_hal::digital::v2::OutputPin;
-use embedded_hal_async::delay::DelayUs;
-use embedded_hal_async::digital::Wait;
-use lora_phy::mod_params::RadioError::*;
-use lora_phy::mod_params::{BoardType, RadioError};
-use lora_phy::mod_traits::InterfaceVariant;
-
-/// Interrupt handler.
-#[cfg(feature = "stm32wl")]
-pub struct InterruptHandler {}
-
-#[cfg(feature = "stm32wl")]
-impl interrupt::typelevel::Handler<interrupt::typelevel::SUBGHZ_RADIO> for InterruptHandler {
-    unsafe fn on_interrupt() {
-        interrupt::SUBGHZ_RADIO.disable();
-        IRQ_SIGNAL.signal(());
-    }
-}
-
-#[cfg(feature = "stm32wl")]
-static IRQ_SIGNAL: Signal<CriticalSectionRawMutex, ()> = Signal::new();
-
-#[cfg(feature = "stm32wl")]
-/// Base for the InterfaceVariant implementation for an stm32wl/sx1262 combination
-pub struct Stm32wlInterfaceVariant<CTRL> {
-    board_type: BoardType,
-    rf_switch_rx: Option<CTRL>,
-    rf_switch_tx: Option<CTRL>,
-}
-
-#[cfg(feature = "stm32wl")]
-impl<'a, CTRL> Stm32wlInterfaceVariant<CTRL>
-where
-    CTRL: OutputPin,
-{
-    /// Create an InterfaceVariant instance for an stm32wl/sx1262 combination
-    pub fn new(
-        _irq: impl interrupt::typelevel::Binding<interrupt::typelevel::SUBGHZ_RADIO, InterruptHandler>,
-        rf_switch_rx: Option<CTRL>,
-        rf_switch_tx: Option<CTRL>,
-    ) -> Result<Self, RadioError> {
-        interrupt::SUBGHZ_RADIO.disable();
-        Ok(Self {
-            board_type: BoardType::Stm32wlSx1262, // updated when associated with a specific LoRa board
-            rf_switch_rx,
-            rf_switch_tx,
-        })
-    }
-}
-
-#[cfg(feature = "stm32wl")]
-impl<CTRL> InterfaceVariant for Stm32wlInterfaceVariant<CTRL>
-where
-    CTRL: OutputPin,
-{
-    fn set_board_type(&mut self, board_type: BoardType) {
-        self.board_type = board_type;
-    }
-    async fn set_nss_low(&mut self) -> Result<(), RadioError> {
-        pac::PWR.subghzspicr().modify(|w| w.set_nss(false));
-        Ok(())
-    }
-    async fn set_nss_high(&mut self) -> Result<(), RadioError> {
-        pac::PWR.subghzspicr().modify(|w| w.set_nss(true));
-        Ok(())
-    }
-    async fn reset(&mut self, _delay: &mut impl DelayUs) -> Result<(), RadioError> {
-        pac::RCC.csr().modify(|w| w.set_rfrst(true));
-        pac::RCC.csr().modify(|w| w.set_rfrst(false));
-        Ok(())
-    }
-    async fn wait_on_busy(&mut self) -> Result<(), RadioError> {
-        while pac::PWR.sr2().read().rfbusys() {}
-        Ok(())
-    }
-
-    async fn await_irq(&mut self) -> Result<(), RadioError> {
-        unsafe { interrupt::SUBGHZ_RADIO.enable() };
-        IRQ_SIGNAL.wait().await;
-        Ok(())
-    }
-
-    async fn enable_rf_switch_rx(&mut self) -> Result<(), RadioError> {
-        match &mut self.rf_switch_tx {
-            Some(pin) => pin.set_low().map_err(|_| RfSwitchTx)?,
-            None => (),
-        };
-        match &mut self.rf_switch_rx {
-            Some(pin) => pin.set_high().map_err(|_| RfSwitchRx),
-            None => Ok(()),
-        }
-    }
-    async fn enable_rf_switch_tx(&mut self) -> Result<(), RadioError> {
-        match &mut self.rf_switch_rx {
-            Some(pin) => pin.set_low().map_err(|_| RfSwitchRx)?,
-            None => (),
-        };
-        match &mut self.rf_switch_tx {
-            Some(pin) => pin.set_high().map_err(|_| RfSwitchTx),
-            None => Ok(()),
-        }
-    }
-    async fn disable_rf_switch(&mut self) -> Result<(), RadioError> {
-        match &mut self.rf_switch_rx {
-            Some(pin) => pin.set_low().map_err(|_| RfSwitchRx)?,
-            None => (),
-        };
-        match &mut self.rf_switch_tx {
-            Some(pin) => pin.set_low().map_err(|_| RfSwitchTx),
-            None => Ok(()),
-        }
-    }
-}
-
-/// Base for the InterfaceVariant implementation for an stm32l0/sx1276 combination
-pub struct Stm32l0InterfaceVariant<CTRL, WAIT> {
-    board_type: BoardType,
-    nss: CTRL,
-    reset: CTRL,
-    irq: WAIT,
-    rf_switch_rx: Option<CTRL>,
-    rf_switch_tx: Option<CTRL>,
-}
-
-impl<CTRL, WAIT> Stm32l0InterfaceVariant<CTRL, WAIT>
-where
-    CTRL: OutputPin,
-    WAIT: Wait,
-{
-    /// Create an InterfaceVariant instance for an stm32l0/sx1276 combination
-    pub fn new(
-        nss: CTRL,
-        reset: CTRL,
-        irq: WAIT,
-        rf_switch_rx: Option<CTRL>,
-        rf_switch_tx: Option<CTRL>,
-    ) -> Result<Self, RadioError> {
-        Ok(Self {
-            board_type: BoardType::Stm32l0Sx1276, // updated when associated with a specific LoRa board
-            nss,
-            reset,
-            irq,
-            rf_switch_rx,
-            rf_switch_tx,
-        })
-    }
-}
-
-impl<CTRL, WAIT> InterfaceVariant for Stm32l0InterfaceVariant<CTRL, WAIT>
-where
-    CTRL: OutputPin,
-    WAIT: Wait,
-{
-    fn set_board_type(&mut self, board_type: BoardType) {
-        self.board_type = board_type;
-    }
-    async fn set_nss_low(&mut self) -> Result<(), RadioError> {
-        self.nss.set_low().map_err(|_| NSS)
-    }
-    async fn set_nss_high(&mut self) -> Result<(), RadioError> {
-        self.nss.set_high().map_err(|_| NSS)
-    }
-    async fn reset(&mut self, delay: &mut impl DelayUs) -> Result<(), RadioError> {
-        delay.delay_ms(10).await;
-        self.reset.set_low().map_err(|_| Reset)?;
-        delay.delay_ms(10).await;
-        self.reset.set_high().map_err(|_| Reset)?;
-        delay.delay_ms(10).await;
-        Ok(())
-    }
-    async fn wait_on_busy(&mut self) -> Result<(), RadioError> {
-        Ok(())
-    }
-    async fn await_irq(&mut self) -> Result<(), RadioError> {
-        self.irq.wait_for_high().await.map_err(|_| Irq)
-    }
-
-    async fn enable_rf_switch_rx(&mut self) -> Result<(), RadioError> {
-        match &mut self.rf_switch_tx {
-            Some(pin) => pin.set_low().map_err(|_| RfSwitchTx)?,
-            None => (),
-        };
-        match &mut self.rf_switch_rx {
-            Some(pin) => pin.set_high().map_err(|_| RfSwitchRx),
-            None => Ok(()),
-        }
-    }
-    async fn enable_rf_switch_tx(&mut self) -> Result<(), RadioError> {
-        match &mut self.rf_switch_rx {
-            Some(pin) => pin.set_low().map_err(|_| RfSwitchRx)?,
-            None => (),
-        };
-        match &mut self.rf_switch_tx {
-            Some(pin) => pin.set_high().map_err(|_| RfSwitchTx),
-            None => Ok(()),
-        }
-    }
-    async fn disable_rf_switch(&mut self) -> Result<(), RadioError> {
-        match &mut self.rf_switch_rx {
-            Some(pin) => pin.set_low().map_err(|_| RfSwitchRx)?,
-            None => (),
-        };
-        match &mut self.rf_switch_tx {
-            Some(pin) => pin.set_low().map_err(|_| RfSwitchTx),
-            None => Ok(()),
-        }
-    }
-}
-
-/// Base for the InterfaceVariant implementation for a generic Sx126x LoRa board
-pub struct GenericSx126xInterfaceVariant<CTRL, WAIT> {
-    board_type: BoardType,
-    nss: CTRL,
-    reset: CTRL,
-    dio1: WAIT,
-    busy: WAIT,
-    rf_switch_rx: Option<CTRL>,
-    rf_switch_tx: Option<CTRL>,
-}
-
-impl<CTRL, WAIT> GenericSx126xInterfaceVariant<CTRL, WAIT>
-where
-    CTRL: OutputPin,
-    WAIT: Wait,
-{
-    /// Create an InterfaceVariant instance for an nrf52840/sx1262 combination
-    pub fn new(
-        nss: CTRL,
-        reset: CTRL,
-        dio1: WAIT,
-        busy: WAIT,
-        rf_switch_rx: Option<CTRL>,
-        rf_switch_tx: Option<CTRL>,
-    ) -> Result<Self, RadioError> {
-        Ok(Self {
-            board_type: BoardType::Rak4631Sx1262, // updated when associated with a specific LoRa board
-            nss,
-            reset,
-            dio1,
-            busy,
-            rf_switch_rx,
-            rf_switch_tx,
-        })
-    }
-}
-
-impl<CTRL, WAIT> InterfaceVariant for GenericSx126xInterfaceVariant<CTRL, WAIT>
-where
-    CTRL: OutputPin,
-    WAIT: Wait,
-{
-    fn set_board_type(&mut self, board_type: BoardType) {
-        self.board_type = board_type;
-    }
-    async fn set_nss_low(&mut self) -> Result<(), RadioError> {
-        self.nss.set_low().map_err(|_| NSS)
-    }
-    async fn set_nss_high(&mut self) -> Result<(), RadioError> {
-        self.nss.set_high().map_err(|_| NSS)
-    }
-    async fn reset(&mut self, delay: &mut impl DelayUs) -> Result<(), RadioError> {
-        delay.delay_ms(10).await;
-        self.reset.set_low().map_err(|_| Reset)?;
-        delay.delay_ms(20).await;
-        self.reset.set_high().map_err(|_| Reset)?;
-        delay.delay_ms(10).await;
-        Ok(())
-    }
-    async fn wait_on_busy(&mut self) -> Result<(), RadioError> {
-        self.busy.wait_for_low().await.map_err(|_| Busy)
-    }
-    async fn await_irq(&mut self) -> Result<(), RadioError> {
-        self.dio1.wait_for_high().await.map_err(|_| DIO1)?;
-        Ok(())
-    }
-
-    async fn enable_rf_switch_rx(&mut self) -> Result<(), RadioError> {
-        match &mut self.rf_switch_tx {
-            Some(pin) => pin.set_low().map_err(|_| RfSwitchTx)?,
-            None => (),
-        };
-        match &mut self.rf_switch_rx {
-            Some(pin) => pin.set_high().map_err(|_| RfSwitchRx),
-            None => Ok(()),
-        }
-    }
-    async fn enable_rf_switch_tx(&mut self) -> Result<(), RadioError> {
-        match &mut self.rf_switch_rx {
-            Some(pin) => pin.set_low().map_err(|_| RfSwitchRx)?,
-            None => (),
-        };
-        match &mut self.rf_switch_tx {
-            Some(pin) => pin.set_high().map_err(|_| RfSwitchTx),
-            None => Ok(()),
-        }
-    }
-    async fn disable_rf_switch(&mut self) -> Result<(), RadioError> {
-        match &mut self.rf_switch_rx {
-            Some(pin) => pin.set_low().map_err(|_| RfSwitchRx)?,
-            None => (),
-        };
-        match &mut self.rf_switch_tx {
-            Some(pin) => pin.set_low().map_err(|_| RfSwitchTx),
-            None => Ok(()),
-        }
-    }
-}

embassy-lora/src/lib.rs

@@ -1,40 +0,0 @@
-#![no_std]
-#![feature(async_fn_in_trait, impl_trait_projections)]
-#![allow(stable_features, unknown_lints, async_fn_in_trait)]
-//! embassy-lora holds LoRa-specific functionality.
-
-pub(crate) mod fmt;
-
-/// interface variants required by the external lora physical layer crate (lora-phy)
-pub mod iv;
-
-#[cfg(feature = "time")]
-use embassy_time::{Duration, Instant, Timer};
-
-/// A convenience timer to use with the LoRaWAN crate
-#[cfg(feature = "time")]
-pub struct LoraTimer {
-    start: Instant,
-}
-
-#[cfg(feature = "time")]
-impl LoraTimer {
-    pub fn new() -> Self {
-        Self { start: Instant::now() }
-    }
-}
-
-#[cfg(feature = "time")]
-impl lorawan_device::async_device::radio::Timer for LoraTimer {
-    fn reset(&mut self) {
-        self.start = Instant::now();
-    }
-
-    async fn at(&mut self, millis: u64) {
-        Timer::at(self.start + Duration::from_millis(millis)).await
-    }
-
-    async fn delay_ms(&mut self, millis: u64) {
-        Timer::after_millis(millis).await
-    }
-}

embassy-net-adin1110/Cargo.toml

@@ -13,16 +13,16 @@ edition = "2021"
 heapless = "0.8"
 defmt = { version = "0.3", optional = true }
 log = { version = "0.4", default-features = false, optional = true }
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.1" }
-embedded-hal-async = { version = "=1.0.0-rc.1" }
-embedded-hal-bus = { version = "=0.1.0-rc.1", features = ["async"] }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
+embedded-hal-async = { version = "=1.0.0-rc.2" }
+embedded-hal-bus = { version = "=0.1.0-rc.2", features = ["async"] }
 embassy-net-driver-channel = { version = "0.2.0", path = "../embassy-net-driver-channel" }
 embassy-time = { version = "0.1.5", path = "../embassy-time" }
 embassy-futures = { version = "0.1.0", path = "../embassy-futures" }
 bitfield = "0.14.0"
 
 [dev-dependencies]
-embedded-hal-mock = { version = "=0.10.0-rc.1", features = ["embedded-hal-async", "eh1"] }
+embedded-hal-mock = { git = "https://github.com/Dirbaio/embedded-hal-mock", rev = "c5c4dca18e043e6386aee02173f61a65fea3981e", features = ["embedded-hal-async", "eh1"] }
 crc = "3.0.1"
 env_logger = "0.10"
 critical-section = { version = "1.1.2", features = ["std"] }

embassy-net-adin1110/src/lib.rs

@@ -729,7 +729,7 @@ mod tests {
     use core::convert::Infallible;
 
     use embedded_hal_1::digital::{ErrorType, OutputPin};
-    use embedded_hal_async::delay::DelayUs;
+    use embedded_hal_async::delay::DelayNs;
     use embedded_hal_bus::spi::ExclusiveDevice;
     use embedded_hal_mock::common::Generic;
     use embedded_hal_mock::eh1::spi::{Mock as SpiMock, Transaction as SpiTransaction};
@@ -760,7 +760,11 @@ mod tests {
     // see https://github.com/rust-embedded/embedded-hal/pull/462#issuecomment-1560014426
     struct MockDelay {}
 
-    impl DelayUs for MockDelay {
+    impl DelayNs for MockDelay {
+        async fn delay_ns(&mut self, _ns: u32) {
+            todo!()
+        }
+
         async fn delay_us(&mut self, _us: u32) {
             todo!()
         }

embassy-net-enc28j60/Cargo.toml

@@ -8,8 +8,8 @@ license = "MIT OR Apache-2.0"
 edition = "2021"
 
 [dependencies]
-embedded-hal = { version = "1.0.0-rc.1" }
-embedded-hal-async = { version = "=1.0.0-rc.1" }
+embedded-hal = { version = "1.0.0-rc.2" }
+embedded-hal-async = { version = "=1.0.0-rc.2" }
 embassy-net-driver = { version = "0.2.0", path = "../embassy-net-driver" }
 embassy-time = { version = "0.1.5", path = "../embassy-time" }
 embassy-futures = { version = "0.1.0", path = "../embassy-futures" }

embassy-net-esp-hosted/Cargo.toml

@@ -12,8 +12,8 @@ embassy-sync = { version = "0.4.0", path = "../embassy-sync"}
 embassy-futures = { version = "0.1.0", path = "../embassy-futures"}
 embassy-net-driver-channel = { version = "0.2.0", path = "../embassy-net-driver-channel"}
 
-embedded-hal = { version = "1.0.0-rc.1" }
-embedded-hal-async = { version = "=1.0.0-rc.1" }
+embedded-hal = { version = "1.0.0-rc.2" }
+embedded-hal-async = { version = "=1.0.0-rc.2" }
 
 noproto = { git="https://github.com/embassy-rs/noproto", rev = "f5e6d1f325b6ad4e344f60452b09576e24671f62", default-features = false, features = ["derive"] }
 #noproto = { version = "0.1", path = "/home/dirbaio/noproto", default-features = false, features = ["derive"] }

embassy-net-ppp/Cargo.toml

@@ -15,7 +15,7 @@ log = ["dep:log", "ppproto/log"]
 defmt = { version = "0.3", optional = true }
 log = { version = "0.4.14", optional = true }
 
-embedded-io-async = { version = "0.6.0" }
+embedded-io-async = { version = "0.6.1" }
 embassy-net-driver-channel = { version = "0.2.0", path = "../embassy-net-driver-channel" }
 embassy-futures = { version = "0.1.0", path = "../embassy-futures" }
 ppproto = { version = "0.1.2"}

embassy-net-wiznet/Cargo.toml

@@ -8,8 +8,8 @@ license = "MIT OR Apache-2.0"
 edition = "2021"
 
 [dependencies]
-embedded-hal = { version = "1.0.0-rc.1" }
-embedded-hal-async = { version = "=1.0.0-rc.1" }
+embedded-hal = { version = "1.0.0-rc.2" }
+embedded-hal-async = { version = "=1.0.0-rc.2" }
 embassy-net-driver-channel = { version = "0.2.0", path = "../embassy-net-driver-channel" }
 embassy-time = { version = "0.1.5", path = "../embassy-time" }
 embassy-futures = { version = "0.1.0", path = "../embassy-futures" }

embassy-net/Cargo.toml

@@ -54,7 +54,7 @@ smoltcp = { git = "https://github.com/smoltcp-rs/smoltcp.git", rev = "b57e2f9e70
 embassy-net-driver = { version = "0.2.0", path = "../embassy-net-driver" }
 embassy-time = { version = "0.1.5", path = "../embassy-time" }
 embassy-sync = { version = "0.4.0", path = "../embassy-sync" }
-embedded-io-async = { version = "0.6.0", optional = true }
+embedded-io-async = { version = "0.6.1", optional = true }
 
 managed = { version = "0.8.0", default-features = false, features = [ "map" ] }
 heapless = { version = "0.8", default-features = false }
@@ -63,4 +63,4 @@ generic-array = { version = "0.14.4", default-features = false }
 stable_deref_trait = { version = "1.2.0", default-features = false }
 futures = { version = "0.3.17", default-features = false, features = [ "async-await" ] }
 atomic-pool = "1.0"
-embedded-nal-async = { version = "0.7", optional = true }
+embedded-nal-async = { version = "0.7.1", optional = true }

embassy-nrf/Cargo.toml

@@ -101,10 +101,10 @@ embassy-embedded-hal = {version = "0.1.0", path = "../embassy-embedded-hal" }
 embassy-usb-driver = {version = "0.1.0", path = "../embassy-usb-driver", optional=true }
 
 embedded-hal-02 = { package = "embedded-hal", version = "0.2.6", features = ["unproven"] }
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.1", optional = true}
-embedded-hal-async = { version = "=1.0.0-rc.1", optional = true}
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2", optional = true}
+embedded-hal-async = { version = "=1.0.0-rc.2", optional = true}
 embedded-io = { version = "0.6.0" }
-embedded-io-async = { version = "0.6.0", optional = true }
+embedded-io-async = { version = "0.6.1", optional = true }
 
 defmt = { version = "0.3", optional = true }
 log = { version = "0.4.14", optional = true }

embassy-rp/Cargo.toml

@@ -76,7 +76,7 @@ critical-section = "1.1"
 futures = { version = "0.3.17", default-features = false, features = ["async-await"] }
 chrono = { version = "0.4", default-features = false, optional = true }
 embedded-io = { version = "0.6.0" }
-embedded-io-async = { version = "0.6.0", optional = true }
+embedded-io-async = { version = "0.6.1", optional = true }
 embedded-storage = { version = "0.3" }
 embedded-storage-async = { version = "0.4.0", optional = true }
 rand_core = "0.6.4"
@@ -85,9 +85,9 @@ fixed = "1.23.1"
 rp-pac = { version = "6" }
 
 embedded-hal-02 = { package = "embedded-hal", version = "0.2.6", features = ["unproven"] }
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.1", optional = true}
-embedded-hal-async = { version = "=1.0.0-rc.1", optional = true}
-embedded-hal-nb = { version = "=1.0.0-rc.1", optional = true}
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2", optional = true}
+embedded-hal-async = { version = "=1.0.0-rc.2", optional = true}
+embedded-hal-nb = { version = "=1.0.0-rc.2", optional = true}
 
 pio-proc = {version= "0.2" }
 pio = {version= "0.2.1" }

embassy-stm32-wpan/src/lib.rs

@@ -4,7 +4,6 @@
     any(feature = "ble", feature = "mac"),
     allow(stable_features, unknown_lints, async_fn_in_trait)
 )]
-#![cfg_attr(feature = "mac", feature(type_alias_impl_trait, concat_bytes))]
 
 // This must go FIRST so that all the other modules see its macros.
 mod fmt;

embassy-stm32/Cargo.toml

@@ -42,9 +42,9 @@ embassy-usb-driver = {version = "0.1.0", path = "../embassy-usb-driver", optiona
 embassy-executor = { version = "0.3.3", path = "../embassy-executor", optional = true }
 
 embedded-hal-02 = { package = "embedded-hal", version = "0.2.6", features = ["unproven"] }
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.1", optional = true}
-embedded-hal-async = { version = "=1.0.0-rc.1", optional = true}
-embedded-hal-nb = { version = "=1.0.0-rc.1", optional = true}
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2", optional = true}
+embedded-hal-async = { version = "=1.0.0-rc.2", optional = true}
+embedded-hal-nb = { version = "=1.0.0-rc.2", optional = true}
 
 embedded-storage = "0.3.0"
 embedded-storage-async = { version = "0.4.0", optional = true }
@@ -58,14 +58,14 @@ rand_core = "0.6.3"
 sdio-host = "0.5.0"
 embedded-sdmmc = { git = "https://github.com/embassy-rs/embedded-sdmmc-rs", rev = "a4f293d3a6f72158385f79c98634cb8a14d0d2fc", optional = true }
 critical-section = "1.1"
-stm32-metapac = { git = "https://github.com/embassy-rs/stm32-data-generated", tag = "stm32-data-fbb8f77326dd066aa6c0d66b3b46e76a569dda8b" }
+stm32-metapac = { git = "https://github.com/embassy-rs/stm32-data-generated", tag = "stm32-data-7117ad49c06fa00c388130a34977e029910083bd" }
 vcell = "0.1.3"
 bxcan = "0.7.0"
 nb = "1.0.0"
 stm32-fmc = "0.3.0"
 cfg-if = "1.0.0"
 embedded-io = { version = "0.6.0" }
-embedded-io-async = { version = "0.6.0", optional = true }
+embedded-io-async = { version = "0.6.1", optional = true }
 chrono = { version = "^0.4", default-features = false, optional = true}
 bit_field = "0.10.2"
 document-features = "0.2.7"
@@ -76,7 +76,7 @@ critical-section = { version = "1.1", features = ["std"] }
 [build-dependencies]
 proc-macro2 = "1.0.36"
 quote = "1.0.15"
-stm32-metapac = { git = "https://github.com/embassy-rs/stm32-data-generated", tag = "stm32-data-fbb8f77326dd066aa6c0d66b3b46e76a569dda8b", default-features = false, features = ["metadata"]}
+stm32-metapac = { git = "https://github.com/embassy-rs/stm32-data-generated", tag = "stm32-data-7117ad49c06fa00c388130a34977e029910083bd", default-features = false, features = ["metadata"]}
 
 
 [features]

embassy-stm32/build.rs

@@ -65,7 +65,6 @@ fn main() {
             match r.kind {
                 // Generate singletons per pin, not per port
                 "gpio" => {
-                    println!("{}", p.name);
                     let port_letter = p.name.strip_prefix("GPIO").unwrap();
                     for pin_num in 0..16 {
                         singletons.push(format!("P{}{}", port_letter, pin_num));
@@ -997,8 +996,8 @@ fn main() {
         // SDMMCv1 uses the same channel for both directions, so just implement for RX
         (("sdmmc", "RX"), quote!(crate::sdmmc::SdmmcDma)),
         (("quadspi", "QUADSPI"), quote!(crate::qspi::QuadDma)),
-        (("dac", "CH1"), quote!(crate::dac::DmaCh1)),
-        (("dac", "CH2"), quote!(crate::dac::DmaCh2)),
+        (("dac", "CH1"), quote!(crate::dac::DacDma1)),
+        (("dac", "CH2"), quote!(crate::dac::DacDma2)),
     ]
     .into();
 
@@ -1138,6 +1137,23 @@ fn main() {
         }
     }
 
+    // ========
+    // Write peripheral_interrupts module.
+    let mut mt = TokenStream::new();
+    for p in METADATA.peripherals {
+        let mut pt = TokenStream::new();
+
+        for irq in p.interrupts {
+            let iname = format_ident!("{}", irq.interrupt);
+            let sname = format_ident!("{}", irq.signal);
+            pt.extend(quote!(pub type #sname = crate::interrupt::typelevel::#iname;));
+        }
+
+        let pname = format_ident!("{}", p.name);
+        mt.extend(quote!(pub mod #pname { #pt }));
+    }
+    g.extend(quote!(#[allow(non_camel_case_types)] pub mod peripheral_interrupts { #mt }));
+
     // ========
     // Write foreach_foo! macrotables
 
@@ -1296,6 +1312,9 @@ fn main() {
 
     let mut m = String::new();
 
+    // DO NOT ADD more macros like these.
+    // These turned to be a bad idea!
+    // Instead, make build.rs generate the final code.
     make_table(&mut m, "foreach_flash_region", &flash_regions_table);
     make_table(&mut m, "foreach_interrupt", &interrupts_table);
     make_table(&mut m, "foreach_peripheral", &peripherals_table);
@@ -1332,15 +1351,6 @@ fn main() {
 
     if let Some(core) = core_name {
         println!("cargo:rustc-cfg={}_{}", &chip_name[..chip_name.len() - 2], core);
-    } else {
-        println!("cargo:rustc-cfg={}", &chip_name[..chip_name.len() - 2]);
-    }
-
-    // ========
-    // stm32f3 wildcard features used in RCC
-
-    if chip_name.starts_with("stm32f3") {
-        println!("cargo:rustc-cfg={}x{}", &chip_name[..9], &chip_name[10..11]);
     }
 
     // =======
@@ -1355,16 +1365,25 @@ fn main() {
     if &chip_name[..8] == "stm32wba" {
         println!("cargo:rustc-cfg={}", &chip_name[..8]); // stm32wba
         println!("cargo:rustc-cfg={}", &chip_name[..10]); // stm32wba52
+        println!("cargo:rustc-cfg=package_{}", &chip_name[10..11]);
+        println!("cargo:rustc-cfg=flashsize_{}", &chip_name[11..12]);
     } else {
         println!("cargo:rustc-cfg={}", &chip_name[..7]); // stm32f4
         println!("cargo:rustc-cfg={}", &chip_name[..9]); // stm32f429
         println!("cargo:rustc-cfg={}x", &chip_name[..8]); // stm32f42x
         println!("cargo:rustc-cfg={}x{}", &chip_name[..7], &chip_name[8..9]); // stm32f4x9
+        println!("cargo:rustc-cfg=package_{}", &chip_name[9..10]);
+        println!("cargo:rustc-cfg=flashsize_{}", &chip_name[10..11]);
     }
 
-    // Handle time-driver-XXXX features.
-    if env::var("CARGO_FEATURE_TIME_DRIVER_ANY").is_ok() {}
-    println!("cargo:rustc-cfg={}", &chip_name[..chip_name.len() - 2]);
+    // Mark the L4+ chips as they have many differences to regular L4.
+    if &chip_name[..7] == "stm32l4" {
+        if "pqrs".contains(&chip_name[7..8]) {
+            println!("cargo:rustc-cfg=stm32l4_plus");
+        } else {
+            println!("cargo:rustc-cfg=stm32l4_nonplus");
+        }
+    }
 
     println!("cargo:rerun-if-changed=build.rs");
 }

embassy-stm32/src/dac/mod.rs

@@ -1,136 +1,66 @@
+//! Provide access to the STM32 digital-to-analog converter (DAC).
 #![macro_use]
 
-//! Provide access to the STM32 digital-to-analog converter (DAC).
 use core::marker::PhantomData;
 
 use embassy_hal_internal::{into_ref, PeripheralRef};
 
+use crate::dma::NoDma;
+#[cfg(any(dac_v3, dac_v4, dac_v5, dac_v6, dac_v7))]
 use crate::pac::dac;
 use crate::rcc::RccPeripheral;
 use crate::{peripherals, Peripheral};
 
+mod tsel;
+pub use tsel::TriggerSel;
+
+/// Operating mode for DAC channel
+#[cfg(any(dac_v3, dac_v4, dac_v5, dac_v6, dac_v7))]
 #[derive(Debug, Copy, Clone, Eq, PartialEq)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
-/// Custom Errors
-pub enum Error {
-    UnconfiguredChannel,
-    InvalidValue,
+pub enum Mode {
+    /// Normal mode, channel is connected to external pin with buffer enabled.
+    NormalExternalBuffered,
+    /// Normal mode, channel is connected to external pin and internal peripherals
+    /// with buffer enabled.
+    NormalBothBuffered,
+    /// Normal mode, channel is connected to external pin with buffer disabled.
+    NormalExternalUnbuffered,
+    /// Normal mode, channel is connected to internal peripherals with buffer disabled.
+    NormalInternalUnbuffered,
+    /// Sample-and-hold mode, channel is connected to external pin with buffer enabled.
+    SampleHoldExternalBuffered,
+    /// Sample-and-hold mode, channel is connected to external pin and internal peripherals
+    /// with buffer enabled.
+    SampleHoldBothBuffered,
+    /// Sample-and-hold mode, channel is connected to external pin and internal peripherals
+    /// with buffer disabled.
+    SampleHoldBothUnbuffered,
+    /// Sample-and-hold mode, channel is connected to internal peripherals with buffer disabled.
+    SampleHoldInternalUnbuffered,
 }
 
-#[derive(Debug, Copy, Clone, Eq, PartialEq)]
-#[cfg_attr(feature = "defmt", derive(defmt::Format))]
-/// DAC Channels
-pub enum Channel {
-    Ch1,
-    Ch2,
-}
-
-impl Channel {
-    const fn index(&self) -> usize {
+#[cfg(any(dac_v3, dac_v4, dac_v5, dac_v6, dac_v7))]
+impl Mode {
+    fn mode(&self) -> dac::vals::Mode {
         match self {
-            Channel::Ch1 => 0,
-            Channel::Ch2 => 1,
+            Mode::NormalExternalBuffered => dac::vals::Mode::NORMAL_EXT_BUFEN,
+            Mode::NormalBothBuffered => dac::vals::Mode::NORMAL_EXT_INT_BUFEN,
+            Mode::NormalExternalUnbuffered => dac::vals::Mode::NORMAL_EXT_BUFDIS,
+            Mode::NormalInternalUnbuffered => dac::vals::Mode::NORMAL_INT_BUFDIS,
+            Mode::SampleHoldExternalBuffered => dac::vals::Mode::SAMPHOLD_EXT_BUFEN,
+            Mode::SampleHoldBothBuffered => dac::vals::Mode::SAMPHOLD_EXT_INT_BUFEN,
+            Mode::SampleHoldBothUnbuffered => dac::vals::Mode::SAMPHOLD_EXT_INT_BUFDIS,
+            Mode::SampleHoldInternalUnbuffered => dac::vals::Mode::SAMPHOLD_INT_BUFDIS,
         }
     }
 }
 
 #[derive(Debug, Copy, Clone, Eq, PartialEq)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
-/// Trigger sources for CH1
-pub enum Ch1Trigger {
-    #[cfg(dac_v3)]
-    Tim1,
-    Tim2,
-    #[cfg(not(dac_v3))]
-    Tim3,
-    #[cfg(dac_v3)]
-    Tim4,
-    #[cfg(dac_v3)]
-    Tim5,
-    Tim6,
-    Tim7,
-    #[cfg(dac_v3)]
-    Tim8,
-    Tim15,
-    #[cfg(dac_v3)]
-    Hrtim1Dactrg1,
-    #[cfg(dac_v3)]
-    Hrtim1Dactrg2,
-    #[cfg(dac_v3)]
-    Lptim1,
-    #[cfg(dac_v3)]
-    Lptim2,
-    #[cfg(dac_v3)]
-    Lptim3,
-    Exti9,
-    Software,
-}
-
-impl Ch1Trigger {
-    fn tsel(&self) -> dac::vals::Tsel1 {
-        match self {
-            #[cfg(dac_v3)]
-            Ch1Trigger::Tim1 => dac::vals::Tsel1::TIM1_TRGO,
-            Ch1Trigger::Tim2 => dac::vals::Tsel1::TIM2_TRGO,
-            #[cfg(not(dac_v3))]
-            Ch1Trigger::Tim3 => dac::vals::Tsel1::TIM3_TRGO,
-            #[cfg(dac_v3)]
-            Ch1Trigger::Tim4 => dac::vals::Tsel1::TIM4_TRGO,
-            #[cfg(dac_v3)]
-            Ch1Trigger::Tim5 => dac::vals::Tsel1::TIM5_TRGO,
-            Ch1Trigger::Tim6 => dac::vals::Tsel1::TIM6_TRGO,
-            Ch1Trigger::Tim7 => dac::vals::Tsel1::TIM7_TRGO,
-            #[cfg(dac_v3)]
-            Ch1Trigger::Tim8 => dac::vals::Tsel1::TIM8_TRGO,
-            Ch1Trigger::Tim15 => dac::vals::Tsel1::TIM15_TRGO,
-            #[cfg(dac_v3)]
-            Ch1Trigger::Hrtim1Dactrg1 => dac::vals::Tsel1::HRTIM1_DACTRG1,
-            #[cfg(dac_v3)]
-            Ch1Trigger::Hrtim1Dactrg2 => dac::vals::Tsel1::HRTIM1_DACTRG2,
-            #[cfg(dac_v3)]
-            Ch1Trigger::Lptim1 => dac::vals::Tsel1::LPTIM1_OUT,
-            #[cfg(dac_v3)]
-            Ch1Trigger::Lptim2 => dac::vals::Tsel1::LPTIM2_OUT,
-            #[cfg(dac_v3)]
-            Ch1Trigger::Lptim3 => dac::vals::Tsel1::LPTIM3_OUT,
-            Ch1Trigger::Exti9 => dac::vals::Tsel1::EXTI9,
-            Ch1Trigger::Software => dac::vals::Tsel1::SOFTWARE,
-        }
-    }
-}
-
-#[derive(Debug, Copy, Clone, Eq, PartialEq)]
-#[cfg_attr(feature = "defmt", derive(defmt::Format))]
-/// Trigger sources for CH2
-pub enum Ch2Trigger {
-    Tim6,
-    Tim8,
-    Tim7,
-    Tim5,
-    Tim2,
-    Tim4,
-    Exti9,
-    Software,
-}
-
-impl Ch2Trigger {
-    fn tsel(&self) -> dac::vals::Tsel2 {
-        match self {
-            Ch2Trigger::Tim6 => dac::vals::Tsel2::TIM6_TRGO,
-            Ch2Trigger::Tim8 => dac::vals::Tsel2::TIM8_TRGO,
-            Ch2Trigger::Tim7 => dac::vals::Tsel2::TIM7_TRGO,
-            Ch2Trigger::Tim5 => dac::vals::Tsel2::TIM5_TRGO,
-            Ch2Trigger::Tim2 => dac::vals::Tsel2::TIM2_TRGO,
-            Ch2Trigger::Tim4 => dac::vals::Tsel2::TIM4_TRGO,
-            Ch2Trigger::Exti9 => dac::vals::Tsel2::EXTI9,
-            Ch2Trigger::Software => dac::vals::Tsel2::SOFTWARE,
-        }
-    }
-}
-
-#[derive(Debug, Copy, Clone, Eq, PartialEq)]
-#[cfg_attr(feature = "defmt", derive(defmt::Format))]
-/// Single 8 or 12 bit value that can be output by the DAC
+/// Single 8 or 12 bit value that can be output by the DAC.
+///
+/// 12-bit values outside the permitted range are silently truncated.
 pub enum Value {
     // 8 bit value
     Bit8(u8),
@@ -142,7 +72,21 @@ pub enum Value {
 
 #[derive(Debug, Copy, Clone, Eq, PartialEq)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
-/// Array variant of [`Value`]
+/// Dual 8 or 12 bit values that can be output by the DAC channels 1 and 2 simultaneously.
+///
+/// 12-bit values outside the permitted range are silently truncated.
+pub enum DualValue {
+    // 8 bit value
+    Bit8(u8, u8),
+    // 12 bit value stored in a u16, left-aligned
+    Bit12Left(u16, u16),
+    // 12 bit value stored in a u16, right-aligned
+    Bit12Right(u16, u16),
+}
+
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+/// Array variant of [`Value`].
 pub enum ValueArray<'a> {
     // 8 bit values
     Bit8(&'a [u8]),
@@ -151,398 +95,395 @@ pub enum ValueArray<'a> {
     // 12 bit values stored in a u16, right-aligned
     Bit12Right(&'a [u16]),
 }
-/// Provide common functions for DAC channels
-pub trait DacChannel<T: Instance, Tx> {
-    const CHANNEL: Channel;
 
-    /// Enable trigger of the given channel
-    fn set_trigger_enable(&mut self, on: bool) -> Result<(), Error> {
-        T::regs().cr().modify(|reg| {
-            reg.set_ten(Self::CHANNEL.index(), on);
-        });
-        Ok(())
-    }
-
-    /// Set mode register of the given channel
-    #[cfg(any(dac_v2, dac_v3))]
-    fn set_channel_mode(&mut self, val: u8) -> Result<(), Error> {
-        T::regs().mcr().modify(|reg| {
-            reg.set_mode(Self::CHANNEL.index(), val);
-        });
-        Ok(())
-    }
-
-    /// Set enable register of the given channel
-    fn set_channel_enable(&mut self, on: bool) -> Result<(), Error> {
-        T::regs().cr().modify(|reg| {
-            reg.set_en(Self::CHANNEL.index(), on);
-        });
-        Ok(())
-    }
-
-    /// Enable the DAC channel `ch`
-    fn enable_channel(&mut self) -> Result<(), Error> {
-        self.set_channel_enable(true)
-    }
-
-    /// Disable the DAC channel `ch`
-    fn disable_channel(&mut self) -> Result<(), Error> {
-        self.set_channel_enable(false)
-    }
-
-    /// Perform a software trigger on `ch`
-    fn trigger(&mut self) {
-        T::regs().swtrigr().write(|reg| {
-            reg.set_swtrig(Self::CHANNEL.index(), true);
-        });
-    }
-
-    /// Set a value to be output by the DAC on trigger.
-    ///
-    /// The `value` is written to the corresponding "data holding register".
-    fn set(&mut self, value: Value) -> Result<(), Error> {
-        match value {
-            Value::Bit8(v) => T::regs().dhr8r(Self::CHANNEL.index()).write(|reg| reg.set_dhr(v)),
-            Value::Bit12Left(v) => T::regs().dhr12l(Self::CHANNEL.index()).write(|reg| reg.set_dhr(v)),
-            Value::Bit12Right(v) => T::regs().dhr12r(Self::CHANNEL.index()).write(|reg| reg.set_dhr(v)),
-        }
-        Ok(())
-    }
-}
-
-/// Hold two DAC channels
+/// Driver for a single DAC channel.
 ///
-/// Note: This consumes the DAC `Instance` only once, allowing to get both channels simultaneously.
-///
-/// # Example for obtaining both DAC channels
-///
-/// ```ignore
-/// // DMA channels and pins may need to be changed for your controller
-/// let (dac_ch1, dac_ch2) =
-///     embassy_stm32::dac::Dac::new(p.DAC1, p.DMA1_CH3, p.DMA1_CH4, p.PA4, p.PA5).split();
-/// ```
-pub struct Dac<'d, T: Instance, TxCh1, TxCh2> {
-    ch1: DacCh1<'d, T, TxCh1>,
-    ch2: DacCh2<'d, T, TxCh2>,
-}
-
-/// DAC CH1
-///
-/// Note: This consumes the DAC `Instance`. Use [`Dac::new`] to get both channels simultaneously.
-pub struct DacCh1<'d, T: Instance, Tx> {
-    /// To consume T
-    _peri: PeripheralRef<'d, T>,
-    #[allow(unused)] // For chips whose DMA is not (yet) supported
-    dma: PeripheralRef<'d, Tx>,
-}
-
-/// DAC CH2
-///
-/// Note: This consumes the DAC `Instance`. Use [`Dac::new`] to get both channels simultaneously.
-pub struct DacCh2<'d, T: Instance, Tx> {
-    /// Instead of PeripheralRef to consume T
+/// If you want to use both channels, either together or independently,
+/// create a [`Dac`] first and use it to access each channel.
+pub struct DacChannel<'d, T: Instance, const N: u8, DMA = NoDma> {
     phantom: PhantomData<&'d mut T>,
-    #[allow(unused)] // For chips whose DMA is not (yet) supported
-    dma: PeripheralRef<'d, Tx>,
+    #[allow(unused)]
+    dma: PeripheralRef<'d, DMA>,
 }
 
-impl<'d, T: Instance, Tx> DacCh1<'d, T, Tx> {
-    /// Obtain DAC CH1
-    pub fn new(
-        peri: impl Peripheral<P = T> + 'd,
-        dma: impl Peripheral<P = Tx> + 'd,
-        pin: impl Peripheral<P = impl DacPin<T, 1>> + crate::gpio::sealed::Pin + 'd,
-    ) -> Self {
-        pin.set_as_analog();
-        into_ref!(peri, dma);
-        T::enable_and_reset();
+pub type DacCh1<'d, T, DMA = NoDma> = DacChannel<'d, T, 1, DMA>;
+pub type DacCh2<'d, T, DMA = NoDma> = DacChannel<'d, T, 2, DMA>;
 
-        let mut dac = Self { _peri: peri, dma };
+impl<'d, T: Instance, const N: u8, DMA> DacChannel<'d, T, N, DMA> {
+    const IDX: usize = (N - 1) as usize;
 
-        // Configure each activated channel. All results can be `unwrap`ed since they
-        // will only error if the channel is not configured (i.e. ch1, ch2 are false)
-        #[cfg(any(dac_v2, dac_v3))]
-        dac.set_channel_mode(0).unwrap();
-        dac.enable_channel().unwrap();
-        dac.set_trigger_enable(true).unwrap();
-
-        dac
-    }
-
-    /// Select a new trigger for this channel
+    /// Create a new `DacChannel` instance, consuming the underlying DAC peripheral.
     ///
-    /// **Important**: This disables the channel!
-    pub fn select_trigger(&mut self, trigger: Ch1Trigger) -> Result<(), Error> {
-        unwrap!(self.disable_channel());
-        T::regs().cr().modify(|reg| {
-            reg.set_tsel1(trigger.tsel());
-        });
-        Ok(())
-    }
-
-    /// Write `data` to the DAC CH1 via DMA.
+    /// If you're not using DMA, pass [`dma::NoDma`] for the `dma` argument.
     ///
-    /// To prevent delays/glitches when outputting a periodic waveform, the `circular` flag can be set.
-    /// This will configure a circular DMA transfer that periodically outputs the `data`.
-    /// Note that for performance reasons in circular mode the transfer complete interrupt is disabled.
+    /// The channel is enabled on creation and begins to drive the output pin.
+    /// Note that some methods, such as `set_trigger()` and `set_mode()`, will
+    /// disable the channel; you must re-enable it with `enable()`.
     ///
-    /// **Important:** Channel 1 has to be configured for the DAC instance!
-    pub async fn write(&mut self, data: ValueArray<'_>, circular: bool) -> Result<(), Error>
-    where
-        Tx: DmaCh1<T>,
-    {
-        let channel = Channel::Ch1.index();
-        debug!("Writing to channel {}", channel);
-
-        // Enable DAC and DMA
-        T::regs().cr().modify(|w| {
-            w.set_en(channel, true);
-            w.set_dmaen(channel, true);
-        });
-
-        let tx_request = self.dma.request();
-        let dma_channel = &mut self.dma;
-
-        let tx_options = crate::dma::TransferOptions {
-            circular,
-            half_transfer_ir: false,
-            complete_transfer_ir: !circular,
-            ..Default::default()
-        };
-
-        // Initiate the correct type of DMA transfer depending on what data is passed
-        let tx_f = match data {
-            ValueArray::Bit8(buf) => unsafe {
-                crate::dma::Transfer::new_write(
-                    dma_channel,
-                    tx_request,
-                    buf,
-                    T::regs().dhr8r(channel).as_ptr() as *mut u8,
-                    tx_options,
-                )
-            },
-            ValueArray::Bit12Left(buf) => unsafe {
-                crate::dma::Transfer::new_write(
-                    dma_channel,
-                    tx_request,
-                    buf,
-                    T::regs().dhr12l(channel).as_ptr() as *mut u16,
-                    tx_options,
-                )
-            },
-            ValueArray::Bit12Right(buf) => unsafe {
-                crate::dma::Transfer::new_write(
-                    dma_channel,
-                    tx_request,
-                    buf,
-                    T::regs().dhr12r(channel).as_ptr() as *mut u16,
-                    tx_options,
-                )
-            },
-        };
-
-        tx_f.await;
-
-        // finish dma
-        // TODO: Do we need to check any status registers here?
-        T::regs().cr().modify(|w| {
-            // Disable the DAC peripheral
-            w.set_en(channel, false);
-            // Disable the DMA. TODO: Is this necessary?
-            w.set_dmaen(channel, false);
-        });
-
-        Ok(())
-    }
-}
-
-impl<'d, T: Instance, Tx> DacCh2<'d, T, Tx> {
-    /// Obtain DAC CH2
+    /// By default, triggering is disabled, but it can be enabled using
+    /// [`DacChannel::set_trigger()`].
     pub fn new(
         _peri: impl Peripheral<P = T> + 'd,
-        dma: impl Peripheral<P = Tx> + 'd,
-        pin: impl Peripheral<P = impl DacPin<T, 2>> + crate::gpio::sealed::Pin + 'd,
+        dma: impl Peripheral<P = DMA> + 'd,
+        pin: impl Peripheral<P = impl DacPin<T, N> + crate::gpio::sealed::Pin> + 'd,
     ) -> Self {
+        into_ref!(dma, pin);
         pin.set_as_analog();
-        into_ref!(_peri, dma);
         T::enable_and_reset();
-
         let mut dac = Self {
             phantom: PhantomData,
             dma,
         };
-
-        // Configure each activated channel. All results can be `unwrap`ed since they
-        // will only error if the channel is not configured (i.e. ch1, ch2 are false)
-        #[cfg(any(dac_v2, dac_v3))]
-        dac.set_channel_mode(0).unwrap();
-        dac.enable_channel().unwrap();
-        dac.set_trigger_enable(true).unwrap();
-
+        #[cfg(any(dac_v5, dac_v6, dac_v7))]
+        dac.set_hfsel();
+        dac.enable();
         dac
     }
 
-    /// Select a new trigger for this channel
-    pub fn select_trigger(&mut self, trigger: Ch2Trigger) -> Result<(), Error> {
-        unwrap!(self.disable_channel());
-        T::regs().cr().modify(|reg| {
-            reg.set_tsel2(trigger.tsel());
-        });
-        Ok(())
-    }
-
-    /// Write `data` to the DAC CH2 via DMA.
+    /// Create a new `DacChannel` instance where the external output pin is not used,
+    /// so the DAC can only be used to generate internal signals.
+    /// The GPIO pin is therefore available to be used for other functions.
     ///
-    /// To prevent delays/glitches when outputting a periodic waveform, the `circular` flag can be set.
-    /// This will configure a circular DMA transfer that periodically outputs the `data`.
-    /// Note that for performance reasons in circular mode the transfer complete interrupt is disabled.
+    /// The channel is set to [`Mode::NormalInternalUnbuffered`] and enabled on creation.
+    /// Note that some methods, such as `set_trigger()` and `set_mode()`, will disable the
+    /// channel; you must re-enable it with `enable()`.
     ///
-    /// **Important:** Channel 2 has to be configured for the DAC instance!
-    pub async fn write(&mut self, data: ValueArray<'_>, circular: bool) -> Result<(), Error>
-    where
-        Tx: DmaCh2<T>,
-    {
-        let channel = Channel::Ch2.index();
-        debug!("Writing to channel {}", channel);
-
-        // Enable DAC and DMA
-        T::regs().cr().modify(|w| {
-            w.set_en(channel, true);
-            w.set_dmaen(channel, true);
-        });
-
-        let tx_request = self.dma.request();
-        let dma_channel = &mut self.dma;
-
-        let tx_options = crate::dma::TransferOptions {
-            circular,
-            half_transfer_ir: false,
-            complete_transfer_ir: !circular,
-            ..Default::default()
-        };
-
-        // Initiate the correct type of DMA transfer depending on what data is passed
-        let tx_f = match data {
-            ValueArray::Bit8(buf) => unsafe {
-                crate::dma::Transfer::new_write(
-                    dma_channel,
-                    tx_request,
-                    buf,
-                    T::regs().dhr8r(channel).as_ptr() as *mut u8,
-                    tx_options,
-                )
-            },
-            ValueArray::Bit12Left(buf) => unsafe {
-                crate::dma::Transfer::new_write(
-                    dma_channel,
-                    tx_request,
-                    buf,
-                    T::regs().dhr12l(channel).as_ptr() as *mut u16,
-                    tx_options,
-                )
-            },
-            ValueArray::Bit12Right(buf) => unsafe {
-                crate::dma::Transfer::new_write(
-                    dma_channel,
-                    tx_request,
-                    buf,
-                    T::regs().dhr12r(channel).as_ptr() as *mut u16,
-                    tx_options,
-                )
-            },
-        };
-
-        tx_f.await;
-
-        // finish dma
-        // TODO: Do we need to check any status registers here?
-        T::regs().cr().modify(|w| {
-            // Disable the DAC peripheral
-            w.set_en(channel, false);
-            // Disable the DMA. TODO: Is this necessary?
-            w.set_dmaen(channel, false);
-        });
-
-        Ok(())
-    }
-}
-
-impl<'d, T: Instance, TxCh1, TxCh2> Dac<'d, T, TxCh1, TxCh2> {
-    /// Create a new DAC instance with both channels.
+    /// If you're not using DMA, pass [`dma::NoDma`] for the `dma` argument.
     ///
-    /// This is used to obtain two independent channels via `split()` for use e.g. with DMA.
-    pub fn new(
-        peri: impl Peripheral<P = T> + 'd,
-        dma_ch1: impl Peripheral<P = TxCh1> + 'd,
-        dma_ch2: impl Peripheral<P = TxCh2> + 'd,
-        pin_ch1: impl Peripheral<P = impl DacPin<T, 1>> + crate::gpio::sealed::Pin + 'd,
-        pin_ch2: impl Peripheral<P = impl DacPin<T, 2>> + crate::gpio::sealed::Pin + 'd,
-    ) -> Self {
-        pin_ch1.set_as_analog();
-        pin_ch2.set_as_analog();
-        into_ref!(peri, dma_ch1, dma_ch2);
+    /// By default, triggering is disabled, but it can be enabled using
+    /// [`DacChannel::set_trigger()`].
+    #[cfg(all(any(dac_v3, dac_v4, dac_v5, dac_v6, dac_v7), not(any(stm32h56x, stm32h57x))))]
+    pub fn new_internal(_peri: impl Peripheral<P = T> + 'd, dma: impl Peripheral<P = DMA> + 'd) -> Self {
+        into_ref!(dma);
         T::enable_and_reset();
-
-        let mut dac_ch1 = DacCh1 {
-            _peri: peri,
-            dma: dma_ch1,
-        };
-
-        let mut dac_ch2 = DacCh2 {
+        let mut dac = Self {
             phantom: PhantomData,
-            dma: dma_ch2,
+            dma,
         };
+        #[cfg(any(dac_v5, dac_v6, dac_v7))]
+        dac.set_hfsel();
+        dac.set_mode(Mode::NormalInternalUnbuffered);
+        dac.enable();
+        dac
+    }
 
-        // Configure each activated channel. All results can be `unwrap`ed since they
-        // will only error if the channel is not configured (i.e. ch1, ch2 are false)
-        #[cfg(any(dac_v2, dac_v3))]
-        dac_ch1.set_channel_mode(0).unwrap();
-        dac_ch1.enable_channel().unwrap();
-        dac_ch1.set_trigger_enable(true).unwrap();
+    /// Enable or disable this channel.
+    pub fn set_enable(&mut self, on: bool) {
+        critical_section::with(|_| {
+            T::regs().cr().modify(|reg| {
+                reg.set_en(Self::IDX, on);
+            });
+        });
+    }
 
-        #[cfg(any(dac_v2, dac_v3))]
-        dac_ch2.set_channel_mode(0).unwrap();
-        dac_ch2.enable_channel().unwrap();
-        dac_ch2.set_trigger_enable(true).unwrap();
+    /// Enable this channel.
+    pub fn enable(&mut self) {
+        self.set_enable(true)
+    }
 
-        Self {
-            ch1: dac_ch1,
-            ch2: dac_ch2,
+    /// Disable this channel.
+    pub fn disable(&mut self) {
+        self.set_enable(false)
+    }
+
+    /// Set the trigger source for this channel.
+    ///
+    /// This method disables the channel, so you may need to re-enable afterwards.
+    pub fn set_trigger(&mut self, source: TriggerSel) {
+        critical_section::with(|_| {
+            T::regs().cr().modify(|reg| {
+                reg.set_en(Self::IDX, false);
+                reg.set_tsel(Self::IDX, source as u8);
+            });
+        });
+    }
+
+    /// Enable or disable triggering for this channel.
+    pub fn set_triggering(&mut self, on: bool) {
+        critical_section::with(|_| {
+            T::regs().cr().modify(|reg| {
+                reg.set_ten(Self::IDX, on);
+            });
+        });
+    }
+
+    /// Software trigger this channel.
+    pub fn trigger(&mut self) {
+        T::regs().swtrigr().write(|reg| {
+            reg.set_swtrig(Self::IDX, true);
+        });
+    }
+
+    /// Set mode of this channel.
+    ///
+    /// This method disables the channel, so you may need to re-enable afterwards.
+    #[cfg(any(dac_v3, dac_v4, dac_v5, dac_v6, dac_v7))]
+    pub fn set_mode(&mut self, mode: Mode) {
+        critical_section::with(|_| {
+            T::regs().cr().modify(|reg| {
+                reg.set_en(Self::IDX, false);
+            });
+            T::regs().mcr().modify(|reg| {
+                reg.set_mode(Self::IDX, mode.mode());
+            });
+        });
+    }
+
+    /// Write a new value to this channel.
+    ///
+    /// If triggering is not enabled, the new value is immediately output; otherwise,
+    /// it will be output after the next trigger.
+    pub fn set(&mut self, value: Value) {
+        match value {
+            Value::Bit8(v) => T::regs().dhr8r(Self::IDX).write(|reg| reg.set_dhr(v)),
+            Value::Bit12Left(v) => T::regs().dhr12l(Self::IDX).write(|reg| reg.set_dhr(v)),
+            Value::Bit12Right(v) => T::regs().dhr12r(Self::IDX).write(|reg| reg.set_dhr(v)),
         }
     }
 
-    /// Split the DAC into CH1 and CH2 for independent use.
-    pub fn split(self) -> (DacCh1<'d, T, TxCh1>, DacCh2<'d, T, TxCh2>) {
+    /// Read the current output value of the DAC.
+    pub fn read(&self) -> u16 {
+        T::regs().dor(Self::IDX).read().dor()
+    }
+
+    /// Set HFSEL as appropriate for the current peripheral clock frequency.
+    #[cfg(dac_v5)]
+    fn set_hfsel(&mut self) {
+        if T::frequency() >= crate::time::mhz(80) {
+            critical_section::with(|_| {
+                T::regs().cr().modify(|reg| {
+                    reg.set_hfsel(true);
+                });
+            });
+        }
+    }
+
+    /// Set HFSEL as appropriate for the current peripheral clock frequency.
+    #[cfg(any(dac_v6, dac_v7))]
+    fn set_hfsel(&mut self) {
+        if T::frequency() >= crate::time::mhz(160) {
+            critical_section::with(|_| {
+                T::regs().mcr().modify(|reg| {
+                    reg.set_hfsel(0b10);
+                });
+            });
+        } else if T::frequency() >= crate::time::mhz(80) {
+            critical_section::with(|_| {
+                T::regs().mcr().modify(|reg| {
+                    reg.set_hfsel(0b01);
+                });
+            });
+        }
+    }
+}
+
+macro_rules! impl_dma_methods {
+    ($n:literal, $trait:ident) => {
+        impl<'d, T: Instance, DMA> DacChannel<'d, T, $n, DMA>
+        where
+            DMA: $trait<T>,
+        {
+            /// Write `data` to this channel via DMA.
+            ///
+            /// To prevent delays or glitches when outputing a periodic waveform, the `circular`
+            /// flag can be set. This configures a circular DMA transfer that continually outputs
+            /// `data`. Note that for performance reasons in circular mode the transfer-complete
+            /// interrupt is disabled.
+            #[cfg(not(gpdma))]
+            pub async fn write(&mut self, data: ValueArray<'_>, circular: bool) {
+                // Enable DAC and DMA
+                T::regs().cr().modify(|w| {
+                    w.set_en(Self::IDX, true);
+                    w.set_dmaen(Self::IDX, true);
+                });
+
+                let tx_request = self.dma.request();
+                let dma_channel = &mut self.dma;
+
+                let tx_options = crate::dma::TransferOptions {
+                    circular,
+                    half_transfer_ir: false,
+                    complete_transfer_ir: !circular,
+                    ..Default::default()
+                };
+
+                // Initiate the correct type of DMA transfer depending on what data is passed
+                let tx_f = match data {
+                    ValueArray::Bit8(buf) => unsafe {
+                        crate::dma::Transfer::new_write(
+                            dma_channel,
+                            tx_request,
+                            buf,
+                            T::regs().dhr8r(Self::IDX).as_ptr() as *mut u8,
+                            tx_options,
+                        )
+                    },
+                    ValueArray::Bit12Left(buf) => unsafe {
+                        crate::dma::Transfer::new_write(
+                            dma_channel,
+                            tx_request,
+                            buf,
+                            T::regs().dhr12l(Self::IDX).as_ptr() as *mut u16,
+                            tx_options,
+                        )
+                    },
+                    ValueArray::Bit12Right(buf) => unsafe {
+                        crate::dma::Transfer::new_write(
+                            dma_channel,
+                            tx_request,
+                            buf,
+                            T::regs().dhr12r(Self::IDX).as_ptr() as *mut u16,
+                            tx_options,
+                        )
+                    },
+                };
+
+                tx_f.await;
+
+                T::regs().cr().modify(|w| {
+                    w.set_en(Self::IDX, false);
+                    w.set_dmaen(Self::IDX, false);
+                });
+            }
+        }
+    };
+}
+
+impl_dma_methods!(1, DacDma1);
+impl_dma_methods!(2, DacDma2);
+
+impl<'d, T: Instance, const N: u8, DMA> Drop for DacChannel<'d, T, N, DMA> {
+    fn drop(&mut self) {
+        T::disable();
+    }
+}
+
+/// DAC driver.
+///
+/// Use this struct when you want to use both channels, either together or independently.
+///
+/// # Example
+///
+/// ```ignore
+/// // Pins may need to be changed for your specific device.
+/// let (dac_ch1, dac_ch2) = embassy_stm32::dac::Dac::new(p.DAC, NoDma, NoDma, p.PA4, p.PA5).split();
+/// ```
+pub struct Dac<'d, T: Instance, DMACh1 = NoDma, DMACh2 = NoDma> {
+    ch1: DacChannel<'d, T, 1, DMACh1>,
+    ch2: DacChannel<'d, T, 2, DMACh2>,
+}
+
+impl<'d, T: Instance, DMACh1, DMACh2> Dac<'d, T, DMACh1, DMACh2> {
+    /// Create a new `Dac` instance, consuming the underlying DAC peripheral.
+    ///
+    /// This struct allows you to access both channels of the DAC, where available. You can either
+    /// call `split()` to obtain separate `DacChannel`s, or use methods on `Dac` to use
+    /// the two channels together.
+    ///
+    /// The channels are enabled on creation and begins to drive their output pins.
+    /// Note that some methods, such as `set_trigger()` and `set_mode()`, will
+    /// disable the channel; you must re-enable them with `enable()`.
+    ///
+    /// By default, triggering is disabled, but it can be enabled using the `set_trigger()`
+    /// method on the underlying channels.
+    pub fn new(
+        _peri: impl Peripheral<P = T> + 'd,
+        dma_ch1: impl Peripheral<P = DMACh1> + 'd,
+        dma_ch2: impl Peripheral<P = DMACh2> + 'd,
+        pin_ch1: impl Peripheral<P = impl DacPin<T, 1> + crate::gpio::sealed::Pin> + 'd,
+        pin_ch2: impl Peripheral<P = impl DacPin<T, 2> + crate::gpio::sealed::Pin> + 'd,
+    ) -> Self {
+        into_ref!(dma_ch1, dma_ch2, pin_ch1, pin_ch2);
+        pin_ch1.set_as_analog();
+        pin_ch2.set_as_analog();
+        // Enable twice to increment the DAC refcount for each channel.
+        T::enable_and_reset();
+        T::enable_and_reset();
+        Self {
+            ch1: DacCh1 {
+                phantom: PhantomData,
+                dma: dma_ch1,
+            },
+            ch2: DacCh2 {
+                phantom: PhantomData,
+                dma: dma_ch2,
+            },
+        }
+    }
+
+    /// Create a new `Dac` instance where the external output pins are not used,
+    /// so the DAC can only be used to generate internal signals but the GPIO
+    /// pins remain available for other functions.
+    ///
+    /// This struct allows you to access both channels of the DAC, where available. You can either
+    /// call `split()` to obtain separate `DacChannel`s, or use methods on `Dac` to use the two
+    /// channels together.
+    ///
+    /// The channels are set to [`Mode::NormalInternalUnbuffered`] and enabled on creation.
+    /// Note that some methods, such as `set_trigger()` and `set_mode()`, will disable the
+    /// channel; you must re-enable them with `enable()`.
+    ///
+    /// By default, triggering is disabled, but it can be enabled using the `set_trigger()`
+    /// method on the underlying channels.
+    #[cfg(all(any(dac_v3, dac_v4, dac_v5, dac_v6, dac_v7), not(any(stm32h56x, stm32h57x))))]
+    pub fn new_internal(
+        _peri: impl Peripheral<P = T> + 'd,
+        dma_ch1: impl Peripheral<P = DMACh1> + 'd,
+        dma_ch2: impl Peripheral<P = DMACh2> + 'd,
+    ) -> Self {
+        into_ref!(dma_ch1, dma_ch2);
+        // Enable twice to increment the DAC refcount for each channel.
+        T::enable_and_reset();
+        T::enable_and_reset();
+        Self {
+            ch1: DacCh1 {
+                phantom: PhantomData,
+                dma: dma_ch1,
+            },
+            ch2: DacCh2 {
+                phantom: PhantomData,
+                dma: dma_ch2,
+            },
+        }
+    }
+
+    /// Split this `Dac` into separate channels.
+    ///
+    /// You can access and move the channels around separately after splitting.
+    pub fn split(self) -> (DacCh1<'d, T, DMACh1>, DacCh2<'d, T, DMACh2>) {
         (self.ch1, self.ch2)
     }
 
-    /// Get mutable reference to CH1
-    pub fn ch1_mut(&mut self) -> &mut DacCh1<'d, T, TxCh1> {
+    /// Temporarily access channel 1.
+    pub fn ch1(&mut self) -> &mut DacCh1<'d, T, DMACh1> {
         &mut self.ch1
     }
 
-    /// Get mutable reference to CH2
-    pub fn ch2_mut(&mut self) -> &mut DacCh2<'d, T, TxCh2> {
+    /// Temporarily access channel 2.
+    pub fn ch2(&mut self) -> &mut DacCh2<'d, T, DMACh2> {
         &mut self.ch2
     }
 
-    /// Get reference to CH1
-    pub fn ch1(&mut self) -> &DacCh1<'d, T, TxCh1> {
-        &self.ch1
+    /// Simultaneously update channels 1 and 2 with a new value.
+    ///
+    /// If triggering is not enabled, the new values are immediately output;
+    /// otherwise, they will be output after the next trigger.
+    pub fn set(&mut self, values: DualValue) {
+        match values {
+            DualValue::Bit8(v1, v2) => T::regs().dhr8rd().write(|reg| {
+                reg.set_dhr(0, v1);
+                reg.set_dhr(1, v2);
+            }),
+            DualValue::Bit12Left(v1, v2) => T::regs().dhr12ld().write(|reg| {
+                reg.set_dhr(0, v1);
+                reg.set_dhr(1, v2);
+            }),
+            DualValue::Bit12Right(v1, v2) => T::regs().dhr12rd().write(|reg| {
+                reg.set_dhr(0, v1);
+                reg.set_dhr(1, v2);
+            }),
+        }
     }
-
-    /// Get reference to CH2
-    pub fn ch2(&mut self) -> &DacCh2<'d, T, TxCh2> {
-        &self.ch2
-    }
-}
-
-impl<'d, T: Instance, Tx> DacChannel<T, Tx> for DacCh1<'d, T, Tx> {
-    const CHANNEL: Channel = Channel::Ch1;
-}
-
-impl<'d, T: Instance, Tx> DacChannel<T, Tx> for DacCh2<'d, T, Tx> {
-    const CHANNEL: Channel = Channel::Ch2;
 }
 
 pub(crate) mod sealed {
@@ -552,34 +493,36 @@ pub(crate) mod sealed {
 }
 
 pub trait Instance: sealed::Instance + RccPeripheral + 'static {}
-dma_trait!(DmaCh1, Instance);
-dma_trait!(DmaCh2, Instance);
+dma_trait!(DacDma1, Instance);
+dma_trait!(DacDma2, Instance);
 
 /// Marks a pin that can be used with the DAC
 pub trait DacPin<T: Instance, const C: u8>: crate::gpio::Pin + 'static {}
 
 foreach_peripheral!(
     (dac, $inst:ident) => {
-                // H7 uses single bit for both DAC1 and DAC2, this is a hack until a proper fix is implemented
-                #[cfg(any(rcc_h7, rcc_h7rm0433))]
-                impl crate::rcc::sealed::RccPeripheral for peripherals::$inst {
-                    fn frequency() -> crate::time::Hertz {
-                        critical_section::with(|_| unsafe { crate::rcc::get_freqs().pclk1 })
-                    }
+        // H7 uses single bit for both DAC1 and DAC2, this is a hack until a proper fix is implemented
+        #[cfg(any(rcc_h7, rcc_h7rm0433))]
+        impl crate::rcc::sealed::RccPeripheral for peripherals::$inst {
+            fn frequency() -> crate::time::Hertz {
+                critical_section::with(|_| unsafe { crate::rcc::get_freqs().pclk1 })
+            }
 
-                    fn enable_and_reset_with_cs(_cs: critical_section::CriticalSection) {
-                        crate::pac::RCC.apb1lrstr().modify(|w| w.set_dac12rst(true));
-                        crate::pac::RCC.apb1lrstr().modify(|w| w.set_dac12rst(false));
-                        crate::pac::RCC.apb1lenr().modify(|w| w.set_dac12en(true));
-                    }
+            fn enable_and_reset_with_cs(_cs: critical_section::CriticalSection) {
+                // TODO: Increment refcount?
+                crate::pac::RCC.apb1lrstr().modify(|w| w.set_dac12rst(true));
+                crate::pac::RCC.apb1lrstr().modify(|w| w.set_dac12rst(false));
+                crate::pac::RCC.apb1lenr().modify(|w| w.set_dac12en(true));
+            }
 
-                    fn disable_with_cs(_cs: critical_section::CriticalSection) {
-                        crate::pac::RCC.apb1lenr().modify(|w| w.set_dac12en(false))
-                    }
-                }
+            fn disable_with_cs(_cs: critical_section::CriticalSection) {
+                // TODO: Decrement refcount?
+                crate::pac::RCC.apb1lenr().modify(|w| w.set_dac12en(false))
+            }
+        }
 
-                #[cfg(any(rcc_h7, rcc_h7rm0433))]
-                impl crate::rcc::RccPeripheral for peripherals::$inst {}
+        #[cfg(any(rcc_h7, rcc_h7rm0433))]
+        impl crate::rcc::RccPeripheral for peripherals::$inst {}
 
         impl crate::dac::sealed::Instance for peripherals::$inst {
             fn regs() -> &'static crate::pac::dac::Dac {

embassy-stm32/src/dac/tsel.rs

@@ -0,0 +1,282 @@
+/// Trigger selection for STM32F0.
+#[cfg(stm32f0)]
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum TriggerSel {
+    Tim6 = 0,
+    Tim3 = 1,
+    Tim7 = 2,
+    Tim15 = 3,
+    Tim2 = 4,
+    Exti9 = 6,
+    Software = 7,
+}
+
+/// Trigger selection for STM32F1.
+#[cfg(stm32f1)]
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum TriggerSel {
+    Tim6 = 0,
+    #[cfg(any(stm32f100, stm32f105, stm32f107))]
+    Tim3 = 1,
+    #[cfg(any(stm32f101, stm32f103))]
+    Tim8 = 1,
+    Tim7 = 2,
+    #[cfg(any(stm32f101, stm32f103, stm32f105, stm32f107))]
+    Tim5 = 3,
+    #[cfg(all(stm32f100, any(flashsize_4, flashsize_6, flashsize_8, flashsize_b)))]
+    Tim15 = 3,
+    #[cfg(all(stm32f100, any(flashsize_c, flashsize_d, flashsize_e)))]
+    /// Can be remapped to TIM15 with MISC_REMAP in AFIO_MAPR2.
+    Tim5Or15 = 3,
+    Tim2 = 4,
+    Tim4 = 5,
+    Exti9 = 6,
+    Software = 7,
+}
+
+/// Trigger selection for STM32F2/F4/F7/L4, except F410 or L4+.
+#[cfg(all(any(stm32f2, stm32f4, stm32f7, stm32l4_nonplus), not(stm32f410)))]
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum TriggerSel {
+    Tim6 = 0,
+    Tim8 = 1,
+    #[cfg(not(any(stm32l45x, stm32l46x)))]
+    Tim7 = 2,
+    Tim5 = 3,
+    Tim2 = 4,
+    Tim4 = 5,
+    Exti9 = 6,
+    Software = 7,
+}
+
+/// Trigger selection for STM32F410.
+#[cfg(stm32f410)]
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum TriggerSel {
+    Tim5 = 3,
+    Exti9 = 6,
+    Software = 7,
+}
+
+/// Trigger selection for STM32F301/2 and 318.
+#[cfg(any(stm32f301, stm32f302, stm32f318))]
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum TriggerSel {
+    Tim6 = 0,
+    #[cfg(stm32f302)]
+    /// Requires DAC_TRIG_RMP set in SYSCFG_CFGR1.
+    Tim3 = 1,
+    Tim15 = 3,
+    Tim2 = 4,
+    #[cfg(all(stm32f302, any(flashsize_6, flashsize_8)))]
+    Tim4 = 5,
+    Exti9 = 6,
+    Software = 7,
+}
+
+/// Trigger selection for STM32F303/3x8 (excluding 318 which is like 301, and 378 which is 37x).
+#[cfg(any(stm32f303, stm32f328, stm32f358, stm32f398))]
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum TriggerSel {
+    Tim6 = 0,
+    /// * DAC1: defaults to TIM8 but can be remapped to TIM3 with DAC_TRIG_RMP in SYSCFG_CFGR1
+    /// * DAC2: always TIM3
+    Tim8Or3 = 1,
+    Tim7 = 2,
+    Tim15 = 3,
+    Tim2 = 4,
+    Tim4 = 5,
+    Exti9 = 6,
+    Software = 7,
+}
+
+/// Trigger selection for STM32F37x.
+#[cfg(any(stm32f373, stm32f378))]
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum TriggerSel {
+    Tim6 = 0,
+    Tim3 = 1,
+    Tim7 = 2,
+    /// TIM5 on DAC1, TIM18 on DAC2
+    Dac1Tim5Dac2Tim18 = 3,
+    Tim2 = 4,
+    Tim4 = 5,
+    Exti9 = 6,
+    Software = 7,
+}
+
+/// Trigger selection for STM32F334.
+#[cfg(stm32f334)]
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum TriggerSel {
+    Tim6 = 0,
+    /// Requires DAC_TRIG_RMP set in SYSCFG_CFGR1.
+    Tim3 = 1,
+    Tim7 = 2,
+    /// Can be remapped to HRTIM_DACTRG1 using DAC1_TRIG3_RMP in SYSCFG_CFGR3.
+    Tim15OrHrtimDacTrg1 = 3,
+    Tim2 = 4,
+    /// Requires DAC_TRIG5_RMP set in SYSCFG_CFGR3.
+    HrtimDacTrg2 = 5,
+}
+
+/// Trigger selection for STM32L0.
+#[cfg(stm32l0)]
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum TriggerSel {
+    Tim6 = 0,
+    Tim3 = 1,
+    Tim3Ch3 = 2,
+    Tim21 = 3,
+    Tim2 = 4,
+    Tim7 = 5,
+    Exti9 = 6,
+    Software = 7,
+}
+
+/// Trigger selection for STM32L1.
+#[cfg(stm32l1)]
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum TriggerSel {
+    Tim6 = 0,
+    Tim7 = 2,
+    Tim9 = 3,
+    Tim2 = 4,
+    Tim4 = 5,
+    Exti9 = 6,
+    Software = 7,
+}
+
+/// Trigger selection for L4+, L5, U5, H7.
+#[cfg(any(stm32l4_plus, stm32l5, stm32u5, stm32h7))]
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum TriggerSel {
+    Software = 0,
+    Tim1 = 1,
+    Tim2 = 2,
+    Tim4 = 3,
+    Tim5 = 4,
+    Tim6 = 5,
+    Tim7 = 6,
+    Tim8 = 7,
+    Tim15 = 8,
+    #[cfg(all(stm32h7, hrtim))]
+    Hrtim1DacTrg1 = 9,
+    #[cfg(all(stm32h7, hrtim))]
+    Hrtim1DacTrg2 = 10,
+    Lptim1 = 11,
+    #[cfg(not(stm32u5))]
+    Lptim2 = 12,
+    #[cfg(stm32u5)]
+    Lptim3 = 12,
+    Exti9 = 13,
+    #[cfg(any(stm32h7ax, stm32h7bx))]
+    /// RM0455 suggests this might be LPTIM2 on DAC1 and LPTIM3 on DAC2,
+    /// but it's probably wrong. Please let us know if you find out.
+    Lptim3 = 14,
+    #[cfg(any(stm32h72x, stm32h73x))]
+    Tim23 = 14,
+    #[cfg(any(stm32h72x, stm32h73x))]
+    Tim24 = 15,
+}
+
+/// Trigger selection for H5.
+#[cfg(stm32h5)]
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum TriggerSel {
+    Software = 0,
+    Tim1 = 1,
+    Tim2 = 2,
+    #[cfg(any(stm32h56x, stm32h57x))]
+    Tim4 = 3,
+    #[cfg(stm32h503)]
+    Tim3 = 3,
+    #[cfg(any(stm32h56x, stm32h57x))]
+    Tim5 = 4,
+    Tim6 = 5,
+    Tim7 = 6,
+    #[cfg(any(stm32h56x, stm32h57x))]
+    Tim8 = 7,
+    #[cfg(any(stm32h56x, stm32h57x))]
+    Tim15 = 8,
+    Lptim1 = 11,
+    Lptim2 = 12,
+    Exti9 = 13,
+}
+
+/// Trigger selection for G0.
+#[cfg(stm32g0)]
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum TriggerSel {
+    Software = 0,
+    Tim1 = 1,
+    Tim2 = 2,
+    Tim3 = 3,
+    Tim6 = 5,
+    Tim7 = 6,
+    Tim15 = 8,
+    Lptim1 = 11,
+    Lptim2 = 12,
+    Exti9 = 13,
+}
+
+/// Trigger selection for G4.
+#[cfg(stm32g4)]
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum TriggerSel {
+    Software = 0,
+    /// * DAC1, DAC2, DAC4: TIM8
+    /// * DAC3: TIM1
+    Dac124Tim8Dac3Tim1 = 1,
+    Tim7 = 2,
+    Tim15 = 3,
+    Tim2 = 4,
+    Tim4 = 5,
+    Exti9 = 6,
+    Tim6 = 7,
+    Tim3 = 8,
+    HrtimDacRstTrg1 = 9,
+    HrtimDacRstTrg2 = 10,
+    HrtimDacRstTrg3 = 11,
+    HrtimDacRstTrg4 = 12,
+    HrtimDacRstTrg5 = 13,
+    HrtimDacRstTrg6 = 14,
+    /// * DAC1, DAC4: HRTIM_DAC_TRG1
+    /// * DAC2: HRTIM_DAC_TRG2
+    /// * DAC3: HRTIM_DAC_TRG3
+    HrtimDacTrg123 = 15,
+}
+
+/// Trigger selection for WL.
+#[cfg(stm32wl)]
+#[derive(Debug, Copy, Clone, Eq, PartialEq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum TriggerSel {
+    Software = 0,
+    Tim1 = 1,
+    Tim2 = 2,
+    Lptim1 = 11,
+    Lptim2 = 12,
+    Lptim3 = 13,
+    Exti9 = 14,
+}
+
+impl TriggerSel {
+    pub fn tsel(&self) -> u8 {
+        *self as u8
+    }
+}

embassy-stm32/src/i2c/mod.rs

@@ -1,11 +1,14 @@
 #![macro_use]
 
+use core::marker::PhantomData;
+
 use crate::interrupt;
 
 #[cfg_attr(i2c_v1, path = "v1.rs")]
 #[cfg_attr(i2c_v2, path = "v2.rs")]
 mod _version;
 pub use _version::*;
+use embassy_sync::waitqueue::AtomicWaker;
 
 use crate::peripherals;
 
@@ -23,6 +26,20 @@ pub enum Error {
 
 pub(crate) mod sealed {
     use super::*;
+
+    pub struct State {
+        #[allow(unused)]
+        pub waker: AtomicWaker,
+    }
+
+    impl State {
+        pub const fn new() -> Self {
+            Self {
+                waker: AtomicWaker::new(),
+            }
+        }
+    }
+
     pub trait Instance: crate::rcc::RccPeripheral {
         fn regs() -> crate::pac::i2c::I2c;
         fn state() -> &'static State;
@@ -30,7 +47,8 @@ pub(crate) mod sealed {
 }
 
 pub trait Instance: sealed::Instance + 'static {
-    type Interrupt: interrupt::typelevel::Interrupt;
+    type EventInterrupt: interrupt::typelevel::Interrupt;
+    type ErrorInterrupt: interrupt::typelevel::Interrupt;
 }
 
 pin_trait!(SclPin, Instance);
@@ -38,21 +56,148 @@ pin_trait!(SdaPin, Instance);
 dma_trait!(RxDma, Instance);
 dma_trait!(TxDma, Instance);
 
-foreach_interrupt!(
-    ($inst:ident, i2c, $block:ident, EV, $irq:ident) => {
+/// Interrupt handler.
+pub struct EventInterruptHandler<T: Instance> {
+    _phantom: PhantomData<T>,
+}
+
+impl<T: Instance> interrupt::typelevel::Handler<T::EventInterrupt> for EventInterruptHandler<T> {
+    unsafe fn on_interrupt() {
+        _version::on_interrupt::<T>()
+    }
+}
+
+pub struct ErrorInterruptHandler<T: Instance> {
+    _phantom: PhantomData<T>,
+}
+
+impl<T: Instance> interrupt::typelevel::Handler<T::ErrorInterrupt> for ErrorInterruptHandler<T> {
+    unsafe fn on_interrupt() {
+        _version::on_interrupt::<T>()
+    }
+}
+
+foreach_peripheral!(
+    (i2c, $inst:ident) => {
         impl sealed::Instance for peripherals::$inst {
             fn regs() -> crate::pac::i2c::I2c {
                 crate::pac::$inst
             }
 
-            fn state() -> &'static State {
-                static STATE: State = State::new();
+            fn state() -> &'static sealed::State {
+                static STATE: sealed::State = sealed::State::new();
                 &STATE
             }
         }
 
         impl Instance for peripherals::$inst {
-            type Interrupt = crate::interrupt::typelevel::$irq;
+            type EventInterrupt = crate::_generated::peripheral_interrupts::$inst::EV;
+            type ErrorInterrupt = crate::_generated::peripheral_interrupts::$inst::ER;
         }
     };
 );
+
+mod eh02 {
+    use super::*;
+
+    impl<'d, T: Instance> embedded_hal_02::blocking::i2c::Read for I2c<'d, T> {
+        type Error = Error;
+
+        fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Self::Error> {
+            self.blocking_read(address, buffer)
+        }
+    }
+
+    impl<'d, T: Instance> embedded_hal_02::blocking::i2c::Write for I2c<'d, T> {
+        type Error = Error;
+
+        fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Self::Error> {
+            self.blocking_write(address, write)
+        }
+    }
+
+    impl<'d, T: Instance> embedded_hal_02::blocking::i2c::WriteRead for I2c<'d, T> {
+        type Error = Error;
+
+        fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
+            self.blocking_write_read(address, write, read)
+        }
+    }
+}
+
+#[cfg(feature = "unstable-traits")]
+mod eh1 {
+    use super::*;
+    use crate::dma::NoDma;
+
+    impl embedded_hal_1::i2c::Error for Error {
+        fn kind(&self) -> embedded_hal_1::i2c::ErrorKind {
+            match *self {
+                Self::Bus => embedded_hal_1::i2c::ErrorKind::Bus,
+                Self::Arbitration => embedded_hal_1::i2c::ErrorKind::ArbitrationLoss,
+                Self::Nack => {
+                    embedded_hal_1::i2c::ErrorKind::NoAcknowledge(embedded_hal_1::i2c::NoAcknowledgeSource::Unknown)
+                }
+                Self::Timeout => embedded_hal_1::i2c::ErrorKind::Other,
+                Self::Crc => embedded_hal_1::i2c::ErrorKind::Other,
+                Self::Overrun => embedded_hal_1::i2c::ErrorKind::Overrun,
+                Self::ZeroLengthTransfer => embedded_hal_1::i2c::ErrorKind::Other,
+            }
+        }
+    }
+
+    impl<'d, T: Instance, TXDMA, RXDMA> embedded_hal_1::i2c::ErrorType for I2c<'d, T, TXDMA, RXDMA> {
+        type Error = Error;
+    }
+
+    impl<'d, T: Instance> embedded_hal_1::i2c::I2c for I2c<'d, T, NoDma, NoDma> {
+        fn read(&mut self, address: u8, read: &mut [u8]) -> Result<(), Self::Error> {
+            self.blocking_read(address, read)
+        }
+
+        fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Self::Error> {
+            self.blocking_write(address, write)
+        }
+
+        fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
+            self.blocking_write_read(address, write, read)
+        }
+
+        fn transaction(
+            &mut self,
+            _address: u8,
+            _operations: &mut [embedded_hal_1::i2c::Operation<'_>],
+        ) -> Result<(), Self::Error> {
+            todo!();
+        }
+    }
+}
+
+#[cfg(all(feature = "unstable-traits", feature = "nightly"))]
+mod eha {
+    use super::*;
+
+    impl<'d, T: Instance, TXDMA: TxDma<T>, RXDMA: RxDma<T>> embedded_hal_async::i2c::I2c for I2c<'d, T, TXDMA, RXDMA> {
+        async fn read(&mut self, address: u8, read: &mut [u8]) -> Result<(), Self::Error> {
+            self.read(address, read).await
+        }
+
+        async fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Self::Error> {
+            self.write(address, write).await
+        }
+
+        async fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
+            self.write_read(address, write, read).await
+        }
+
+        async fn transaction(
+            &mut self,
+            address: u8,
+            operations: &mut [embedded_hal_1::i2c::Operation<'_>],
+        ) -> Result<(), Self::Error> {
+            let _ = address;
+            let _ = operations;
+            todo!()
+        }
+    }
+}

embassy-stm32/src/i2c/v1.rs

@@ -1,23 +1,33 @@
+use core::future::poll_fn;
 use core::marker::PhantomData;
+use core::task::Poll;
 
 use embassy_embedded_hal::SetConfig;
+use embassy_futures::select::{select, Either};
+use embassy_hal_internal::drop::OnDrop;
 use embassy_hal_internal::{into_ref, PeripheralRef};
 
-use crate::dma::NoDma;
+use super::*;
+use crate::dma::{NoDma, Transfer};
 use crate::gpio::sealed::AFType;
 use crate::gpio::Pull;
-use crate::i2c::{Error, Instance, SclPin, SdaPin};
+use crate::interrupt::typelevel::Interrupt;
 use crate::pac::i2c;
 use crate::time::Hertz;
 use crate::{interrupt, Peripheral};
 
-/// Interrupt handler.
-pub struct InterruptHandler<T: Instance> {
-    _phantom: PhantomData<T>,
-}
-
-impl<T: Instance> interrupt::typelevel::Handler<T::Interrupt> for InterruptHandler<T> {
-    unsafe fn on_interrupt() {}
+pub unsafe fn on_interrupt<T: Instance>() {
+    let regs = T::regs();
+    // i2c v2 only woke the task on transfer complete interrupts. v1 uses interrupts for a bunch of
+    // other stuff, so we wake the task on every interrupt.
+    T::state().waker.wake();
+    critical_section::with(|_| {
+        // Clear event interrupt flag.
+        regs.cr2().modify(|w| {
+            w.set_itevten(false);
+            w.set_iterren(false);
+        });
+    });
 }
 
 #[non_exhaustive]
@@ -27,14 +37,6 @@ pub struct Config {
     pub scl_pullup: bool,
 }
 
-pub struct State {}
-
-impl State {
-    pub(crate) const fn new() -> Self {
-        Self {}
-    }
-}
-
 pub struct I2c<'d, T: Instance, TXDMA = NoDma, RXDMA = NoDma> {
     phantom: PhantomData<&'d mut T>,
     #[allow(dead_code)]
@@ -48,7 +50,9 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         _peri: impl Peripheral<P = T> + 'd,
         scl: impl Peripheral<P = impl SclPin<T>> + 'd,
         sda: impl Peripheral<P = impl SdaPin<T>> + 'd,
-        _irq: impl interrupt::typelevel::Binding<T::Interrupt, InterruptHandler<T>> + 'd,
+        _irq: impl interrupt::typelevel::Binding<T::EventInterrupt, EventInterruptHandler<T>>
+            + interrupt::typelevel::Binding<T::ErrorInterrupt, ErrorInterruptHandler<T>>
+            + 'd,
         tx_dma: impl Peripheral<P = TXDMA> + 'd,
         rx_dma: impl Peripheral<P = RXDMA> + 'd,
         freq: Hertz,
@@ -98,6 +102,9 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
             reg.set_pe(true);
         });
 
+        unsafe { T::EventInterrupt::enable() };
+        unsafe { T::ErrorInterrupt::enable() };
+
         Self {
             phantom: PhantomData,
             tx_dma,
@@ -105,40 +112,58 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         }
     }
 
-    fn check_and_clear_error_flags(&self) -> Result<i2c::regs::Sr1, Error> {
+    fn check_and_clear_error_flags() -> Result<i2c::regs::Sr1, Error> {
         // Note that flags should only be cleared once they have been registered. If flags are
         // cleared otherwise, there may be an inherent race condition and flags may be missed.
         let sr1 = T::regs().sr1().read();
 
         if sr1.timeout() {
-            T::regs().sr1().modify(|reg| reg.set_timeout(false));
+            T::regs().sr1().write(|reg| {
+                reg.0 = !0;
+                reg.set_timeout(false);
+            });
             return Err(Error::Timeout);
         }
 
         if sr1.pecerr() {
-            T::regs().sr1().modify(|reg| reg.set_pecerr(false));
+            T::regs().sr1().write(|reg| {
+                reg.0 = !0;
+                reg.set_pecerr(false);
+            });
             return Err(Error::Crc);
         }
 
         if sr1.ovr() {
-            T::regs().sr1().modify(|reg| reg.set_ovr(false));
+            T::regs().sr1().write(|reg| {
+                reg.0 = !0;
+                reg.set_ovr(false);
+            });
             return Err(Error::Overrun);
         }
 
         if sr1.af() {
-            T::regs().sr1().modify(|reg| reg.set_af(false));
+            T::regs().sr1().write(|reg| {
+                reg.0 = !0;
+                reg.set_af(false);
+            });
             return Err(Error::Nack);
         }
 
         if sr1.arlo() {
-            T::regs().sr1().modify(|reg| reg.set_arlo(false));
+            T::regs().sr1().write(|reg| {
+                reg.0 = !0;
+                reg.set_arlo(false);
+            });
             return Err(Error::Arbitration);
         }
 
         // The errata indicates that BERR may be incorrectly detected. It recommends ignoring and
         // clearing the BERR bit instead.
         if sr1.berr() {
-            T::regs().sr1().modify(|reg| reg.set_berr(false));
+            T::regs().sr1().write(|reg| {
+                reg.0 = !0;
+                reg.set_berr(false);
+            });
         }
 
         Ok(sr1)
@@ -157,13 +182,13 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         });
 
         // Wait until START condition was generated
-        while !self.check_and_clear_error_flags()?.start() {
+        while !Self::check_and_clear_error_flags()?.start() {
             check_timeout()?;
         }
 
         // Also wait until signalled we're master and everything is waiting for us
         while {
-            self.check_and_clear_error_flags()?;
+            Self::check_and_clear_error_flags()?;
 
             let sr2 = T::regs().sr2().read();
             !sr2.msl() && !sr2.busy()
@@ -177,7 +202,7 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         // Wait until address was sent
         // Wait for the address to be acknowledged
         // Check for any I2C errors. If a NACK occurs, the ADDR bit will never be set.
-        while !self.check_and_clear_error_flags()?.addr() {
+        while !Self::check_and_clear_error_flags()?.addr() {
             check_timeout()?;
         }
 
@@ -197,7 +222,7 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         // Wait until we're ready for sending
         while {
             // Check for any I2C errors. If a NACK occurs, the ADDR bit will never be set.
-            !self.check_and_clear_error_flags()?.txe()
+            !Self::check_and_clear_error_flags()?.txe()
         } {
             check_timeout()?;
         }
@@ -208,7 +233,7 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         // Wait until byte is transferred
         while {
             // Check for any potential error conditions.
-            !self.check_and_clear_error_flags()?.btf()
+            !Self::check_and_clear_error_flags()?.btf()
         } {
             check_timeout()?;
         }
@@ -219,7 +244,7 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
     fn recv_byte(&self, check_timeout: impl Fn() -> Result<(), Error>) -> Result<u8, Error> {
         while {
             // Check for any potential error conditions.
-            self.check_and_clear_error_flags()?;
+            Self::check_and_clear_error_flags()?;
 
             !T::regs().sr1().read().rxne()
         } {
@@ -244,7 +269,7 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
             });
 
             // Wait until START condition was generated
-            while !self.check_and_clear_error_flags()?.start() {
+            while !Self::check_and_clear_error_flags()?.start() {
                 check_timeout()?;
             }
 
@@ -261,7 +286,7 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
 
             // Wait until address was sent
             // Wait for the address to be acknowledged
-            while !self.check_and_clear_error_flags()?.addr() {
+            while !Self::check_and_clear_error_flags()?.addr() {
                 check_timeout()?;
             }
 
@@ -336,6 +361,356 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
     pub fn blocking_write_read(&mut self, addr: u8, write: &[u8], read: &mut [u8]) -> Result<(), Error> {
         self.blocking_write_read_timeout(addr, write, read, || Ok(()))
     }
+
+    // Async
+
+    #[inline] // pretty sure this should always be inlined
+    fn enable_interrupts() -> () {
+        T::regs().cr2().modify(|w| {
+            w.set_iterren(true);
+            w.set_itevten(true);
+        });
+    }
+
+    async fn write_with_stop(&mut self, address: u8, write: &[u8], send_stop: bool) -> Result<(), Error>
+    where
+        TXDMA: crate::i2c::TxDma<T>,
+    {
+        let dma_transfer = unsafe {
+            let regs = T::regs();
+            regs.cr2().modify(|w| {
+                // DMA mode can be enabled for transmission by setting the DMAEN bit in the I2C_CR2 register.
+                w.set_dmaen(true);
+                w.set_itbufen(false);
+            });
+            // Set the I2C_DR register address in the DMA_SxPAR register. The data will be moved to this address from the memory after each TxE event.
+            let dst = regs.dr().as_ptr() as *mut u8;
+
+            let ch = &mut self.tx_dma;
+            let request = ch.request();
+            Transfer::new_write(ch, request, write, dst, Default::default())
+        };
+
+        let on_drop = OnDrop::new(|| {
+            let regs = T::regs();
+            regs.cr2().modify(|w| {
+                w.set_dmaen(false);
+                w.set_iterren(false);
+                w.set_itevten(false);
+            })
+        });
+
+        Self::enable_interrupts();
+
+        // Send a START condition
+        T::regs().cr1().modify(|reg| {
+            reg.set_start(true);
+        });
+
+        let state = T::state();
+
+        // Wait until START condition was generated
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err(e)),
+                Ok(sr1) => {
+                    if sr1.start() {
+                        Poll::Ready(Ok(()))
+                    } else {
+                        Poll::Pending
+                    }
+                }
+            }
+        })
+        .await?;
+
+        // Also wait until signalled we're master and everything is waiting for us
+        Self::enable_interrupts();
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err(e)),
+                Ok(_) => {
+                    let sr2 = T::regs().sr2().read();
+                    if !sr2.msl() && !sr2.busy() {
+                        Poll::Pending
+                    } else {
+                        Poll::Ready(Ok(()))
+                    }
+                }
+            }
+        })
+        .await?;
+
+        // Set up current address, we're trying to talk to
+        Self::enable_interrupts();
+        T::regs().dr().write(|reg| reg.set_dr(address << 1));
+
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err(e)),
+                Ok(sr1) => {
+                    if sr1.addr() {
+                        // Clear the ADDR condition by reading SR2.
+                        T::regs().sr2().read();
+                        Poll::Ready(Ok(()))
+                    } else {
+                        Poll::Pending
+                    }
+                }
+            }
+        })
+        .await?;
+        Self::enable_interrupts();
+        let poll_error = poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            match Self::check_and_clear_error_flags() {
+                // Unclear why the Err turbofish is necessary here? The compiler didn’t require it in the other
+                // identical poll_fn check_and_clear matches.
+                Err(e) => Poll::Ready(Err::<T, Error>(e)),
+                Ok(_) => Poll::Pending,
+            }
+        });
+
+        // Wait for either the DMA transfer to successfully finish, or an I2C error to occur.
+        match select(dma_transfer, poll_error).await {
+            Either::Second(Err(e)) => Err(e),
+            _ => Ok(()),
+        }?;
+
+        // The I2C transfer itself will take longer than the DMA transfer, so wait for that to finish too.
+
+        // 18.3.8 “Master transmitter: In the interrupt routine after the EOT interrupt, disable DMA
+        // requests then wait for a BTF event before programming the Stop condition.”
+
+        // TODO: If this has to be done “in the interrupt routine after the EOT interrupt”, where to put it?
+        T::regs().cr2().modify(|w| {
+            w.set_dmaen(false);
+        });
+
+        Self::enable_interrupts();
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err(e)),
+                Ok(sr1) => {
+                    if sr1.btf() {
+                        if send_stop {
+                            T::regs().cr1().modify(|w| {
+                                w.set_stop(true);
+                            });
+                        }
+
+                        Poll::Ready(Ok(()))
+                    } else {
+                        Poll::Pending
+                    }
+                }
+            }
+        })
+        .await?;
+
+        drop(on_drop);
+
+        // Fallthrough is success
+        Ok(())
+    }
+
+    pub async fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Error>
+    where
+        TXDMA: crate::i2c::TxDma<T>,
+    {
+        self.write_with_stop(address, write, true).await?;
+
+        // Wait for STOP condition to transmit.
+        Self::enable_interrupts();
+        poll_fn(|cx| {
+            T::state().waker.register(cx.waker());
+            // TODO: error interrupts are enabled here, should we additional check for and return errors?
+            if T::regs().cr1().read().stop() {
+                Poll::Pending
+            } else {
+                Poll::Ready(Ok(()))
+            }
+        })
+        .await?;
+
+        Ok(())
+    }
+
+    pub async fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Error>
+    where
+        RXDMA: crate::i2c::RxDma<T>,
+    {
+        let state = T::state();
+        let buffer_len = buffer.len();
+
+        let dma_transfer = unsafe {
+            let regs = T::regs();
+            regs.cr2().modify(|w| {
+                // DMA mode can be enabled for transmission by setting the DMAEN bit in the I2C_CR2 register.
+                w.set_itbufen(false);
+                w.set_dmaen(true);
+            });
+            // Set the I2C_DR register address in the DMA_SxPAR register. The data will be moved to this address from the memory after each TxE event.
+            let src = regs.dr().as_ptr() as *mut u8;
+
+            let ch = &mut self.rx_dma;
+            let request = ch.request();
+            Transfer::new_read(ch, request, src, buffer, Default::default())
+        };
+
+        let on_drop = OnDrop::new(|| {
+            let regs = T::regs();
+            regs.cr2().modify(|w| {
+                w.set_dmaen(false);
+                w.set_iterren(false);
+                w.set_itevten(false);
+            })
+        });
+
+        Self::enable_interrupts();
+
+        // Send a START condition and set ACK bit
+        T::regs().cr1().modify(|reg| {
+            reg.set_start(true);
+            reg.set_ack(true);
+        });
+
+        // Wait until START condition was generated
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err(e)),
+                Ok(sr1) => {
+                    if sr1.start() {
+                        Poll::Ready(Ok(()))
+                    } else {
+                        Poll::Pending
+                    }
+                }
+            }
+        })
+        .await?;
+
+        // Also wait until signalled we're master and everything is waiting for us
+        Self::enable_interrupts();
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            // blocking read didn’t have a check_and_clear call here, but blocking write did so
+            // I’m adding it here in case that was an oversight.
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err(e)),
+                Ok(_) => {
+                    let sr2 = T::regs().sr2().read();
+                    if !sr2.msl() && !sr2.busy() {
+                        Poll::Pending
+                    } else {
+                        Poll::Ready(Ok(()))
+                    }
+                }
+            }
+        })
+        .await?;
+
+        // Set up current address, we're trying to talk to
+        T::regs().dr().write(|reg| reg.set_dr((address << 1) + 1));
+
+        // Wait for the address to be acknowledged
+
+        Self::enable_interrupts();
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err(e)),
+                Ok(sr1) => {
+                    if sr1.addr() {
+                        // 18.3.8: When a single byte must be received: the NACK must be programmed during EV6
+                        // event, i.e. program ACK=0 when ADDR=1, before clearing ADDR flag.
+                        if buffer_len == 1 {
+                            T::regs().cr1().modify(|w| {
+                                w.set_ack(false);
+                            });
+                        }
+                        Poll::Ready(Ok(()))
+                    } else {
+                        Poll::Pending
+                    }
+                }
+            }
+        })
+        .await?;
+
+        // Clear ADDR condition by reading SR2
+        T::regs().sr2().read();
+
+        // 18.3.8: When a single byte must be received: [snip] Then the
+        // user can program the STOP condition either after clearing ADDR flag, or in the
+        // DMA Transfer Complete interrupt routine.
+        if buffer_len == 1 {
+            T::regs().cr1().modify(|w| {
+                w.set_stop(true);
+            });
+        } else {
+            // If, in the I2C_CR2 register, the LAST bit is set, I2C
+            // automatically sends a NACK after the next byte following EOT_1. The user can
+            // generate a Stop condition in the DMA Transfer Complete interrupt routine if enabled.
+            T::regs().cr2().modify(|w| {
+                w.set_last(true);
+            })
+        }
+
+        // Wait for bytes to be received, or an error to occur.
+        Self::enable_interrupts();
+        let poll_error = poll_fn(|cx| {
+            state.waker.register(cx.waker());
+
+            match Self::check_and_clear_error_flags() {
+                Err(e) => Poll::Ready(Err::<T, Error>(e)),
+                _ => Poll::Pending,
+            }
+        });
+
+        match select(dma_transfer, poll_error).await {
+            Either::Second(Err(e)) => Err(e),
+            _ => Ok(()),
+        }?;
+
+        // Wait for the STOP to be sent (STOP bit cleared).
+        Self::enable_interrupts();
+        poll_fn(|cx| {
+            state.waker.register(cx.waker());
+            // TODO: error interrupts are enabled here, should we additional check for and return errors?
+            if T::regs().cr1().read().stop() {
+                Poll::Pending
+            } else {
+                Poll::Ready(Ok(()))
+            }
+        })
+        .await?;
+        drop(on_drop);
+
+        // Fallthrough is success
+        Ok(())
+    }
+
+    pub async fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Error>
+    where
+        RXDMA: crate::i2c::RxDma<T>,
+        TXDMA: crate::i2c::TxDma<T>,
+    {
+        self.write_with_stop(address, write, false).await?;
+        self.read(address, read).await
+    }
 }
 
 impl<'d, T: Instance, TXDMA, RXDMA> Drop for I2c<'d, T, TXDMA, RXDMA> {
@@ -344,77 +719,6 @@ impl<'d, T: Instance, TXDMA, RXDMA> Drop for I2c<'d, T, TXDMA, RXDMA> {
     }
 }
 
-impl<'d, T: Instance> embedded_hal_02::blocking::i2c::Read for I2c<'d, T> {
-    type Error = Error;
-
-    fn read(&mut self, addr: u8, read: &mut [u8]) -> Result<(), Self::Error> {
-        self.blocking_read(addr, read)
-    }
-}
-
-impl<'d, T: Instance> embedded_hal_02::blocking::i2c::Write for I2c<'d, T> {
-    type Error = Error;
-
-    fn write(&mut self, addr: u8, write: &[u8]) -> Result<(), Self::Error> {
-        self.blocking_write(addr, write)
-    }
-}
-
-impl<'d, T: Instance> embedded_hal_02::blocking::i2c::WriteRead for I2c<'d, T> {
-    type Error = Error;
-
-    fn write_read(&mut self, addr: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
-        self.blocking_write_read(addr, write, read)
-    }
-}
-
-#[cfg(feature = "unstable-traits")]
-mod eh1 {
-    use super::*;
-
-    impl embedded_hal_1::i2c::Error for Error {
-        fn kind(&self) -> embedded_hal_1::i2c::ErrorKind {
-            match *self {
-                Self::Bus => embedded_hal_1::i2c::ErrorKind::Bus,
-                Self::Arbitration => embedded_hal_1::i2c::ErrorKind::ArbitrationLoss,
-                Self::Nack => {
-                    embedded_hal_1::i2c::ErrorKind::NoAcknowledge(embedded_hal_1::i2c::NoAcknowledgeSource::Unknown)
-                }
-                Self::Timeout => embedded_hal_1::i2c::ErrorKind::Other,
-                Self::Crc => embedded_hal_1::i2c::ErrorKind::Other,
-                Self::Overrun => embedded_hal_1::i2c::ErrorKind::Overrun,
-                Self::ZeroLengthTransfer => embedded_hal_1::i2c::ErrorKind::Other,
-            }
-        }
-    }
-
-    impl<'d, T: Instance> embedded_hal_1::i2c::ErrorType for I2c<'d, T> {
-        type Error = Error;
-    }
-
-    impl<'d, T: Instance> embedded_hal_1::i2c::I2c for I2c<'d, T> {
-        fn read(&mut self, address: u8, read: &mut [u8]) -> Result<(), Self::Error> {
-            self.blocking_read(address, read)
-        }
-
-        fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Self::Error> {
-            self.blocking_write(address, write)
-        }
-
-        fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
-            self.blocking_write_read(address, write, read)
-        }
-
-        fn transaction(
-            &mut self,
-            _address: u8,
-            _operations: &mut [embedded_hal_1::i2c::Operation<'_>],
-        ) -> Result<(), Self::Error> {
-            todo!();
-        }
-    }
-}
-
 enum Mode {
     Fast,
     Standard,

embassy-stm32/src/i2c/v2.rs

@@ -1,19 +1,17 @@
 use core::cmp;
 use core::future::poll_fn;
-use core::marker::PhantomData;
 use core::task::Poll;
 
 use embassy_embedded_hal::SetConfig;
 use embassy_hal_internal::drop::OnDrop;
 use embassy_hal_internal::{into_ref, PeripheralRef};
-use embassy_sync::waitqueue::AtomicWaker;
 #[cfg(feature = "time")]
 use embassy_time::{Duration, Instant};
 
+use super::*;
 use crate::dma::{NoDma, Transfer};
 use crate::gpio::sealed::AFType;
 use crate::gpio::Pull;
-use crate::i2c::{Error, Instance, SclPin, SdaPin};
 use crate::interrupt::typelevel::Interrupt;
 use crate::pac::i2c;
 use crate::time::Hertz;
@@ -36,25 +34,18 @@ pub fn no_timeout_fn() -> impl Fn() -> Result<(), Error> {
     move || Ok(())
 }
 
-/// Interrupt handler.
-pub struct InterruptHandler<T: Instance> {
-    _phantom: PhantomData<T>,
-}
+pub unsafe fn on_interrupt<T: Instance>() {
+    let regs = T::regs();
+    let isr = regs.isr().read();
 
-impl<T: Instance> interrupt::typelevel::Handler<T::Interrupt> for InterruptHandler<T> {
-    unsafe fn on_interrupt() {
-        let regs = T::regs();
-        let isr = regs.isr().read();
-
-        if isr.tcr() || isr.tc() {
-            T::state().waker.wake();
-        }
-        // The flag can only be cleared by writting to nbytes, we won't do that here, so disable
-        // the interrupt
-        critical_section::with(|_| {
-            regs.cr1().modify(|w| w.set_tcie(false));
-        });
+    if isr.tcr() || isr.tc() {
+        T::state().waker.wake();
     }
+    // The flag can only be cleared by writting to nbytes, we won't do that here, so disable
+    // the interrupt
+    critical_section::with(|_| {
+        regs.cr1().modify(|w| w.set_tcie(false));
+    });
 }
 
 #[non_exhaustive]
@@ -77,18 +68,6 @@ impl Default for Config {
     }
 }
 
-pub struct State {
-    waker: AtomicWaker,
-}
-
-impl State {
-    pub(crate) const fn new() -> Self {
-        Self {
-            waker: AtomicWaker::new(),
-        }
-    }
-}
-
 pub struct I2c<'d, T: Instance, TXDMA = NoDma, RXDMA = NoDma> {
     _peri: PeripheralRef<'d, T>,
     #[allow(dead_code)]
@@ -104,7 +83,9 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
         peri: impl Peripheral<P = T> + 'd,
         scl: impl Peripheral<P = impl SclPin<T>> + 'd,
         sda: impl Peripheral<P = impl SdaPin<T>> + 'd,
-        _irq: impl interrupt::typelevel::Binding<T::Interrupt, InterruptHandler<T>> + 'd,
+        _irq: impl interrupt::typelevel::Binding<T::EventInterrupt, EventInterruptHandler<T>>
+            + interrupt::typelevel::Binding<T::ErrorInterrupt, ErrorInterruptHandler<T>>
+            + 'd,
         tx_dma: impl Peripheral<P = TXDMA> + 'd,
         rx_dma: impl Peripheral<P = RXDMA> + 'd,
         freq: Hertz,
@@ -150,8 +131,8 @@ impl<'d, T: Instance, TXDMA, RXDMA> I2c<'d, T, TXDMA, RXDMA> {
             reg.set_pe(true);
         });
 
-        T::Interrupt::unpend();
-        unsafe { T::Interrupt::enable() };
+        unsafe { T::EventInterrupt::enable() };
+        unsafe { T::ErrorInterrupt::enable() };
 
         Self {
             _peri: peri,
@@ -987,35 +968,6 @@ impl<'d, T: Instance, TXDMA, RXDMA> Drop for I2c<'d, T, TXDMA, RXDMA> {
     }
 }
 
-#[cfg(feature = "time")]
-mod eh02 {
-    use super::*;
-
-    impl<'d, T: Instance> embedded_hal_02::blocking::i2c::Read for I2c<'d, T> {
-        type Error = Error;
-
-        fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Self::Error> {
-            self.blocking_read(address, buffer)
-        }
-    }
-
-    impl<'d, T: Instance> embedded_hal_02::blocking::i2c::Write for I2c<'d, T> {
-        type Error = Error;
-
-        fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Self::Error> {
-            self.blocking_write(address, write)
-        }
-    }
-
-    impl<'d, T: Instance> embedded_hal_02::blocking::i2c::WriteRead for I2c<'d, T> {
-        type Error = Error;
-
-        fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
-            self.blocking_write_read(address, write, read)
-        }
-    }
-}
-
 /// I2C Stop Configuration
 ///
 /// Peripheral options for generating the STOP condition
@@ -1140,83 +1092,6 @@ impl Timings {
     }
 }
 
-#[cfg(feature = "unstable-traits")]
-mod eh1 {
-    use super::*;
-
-    impl embedded_hal_1::i2c::Error for Error {
-        fn kind(&self) -> embedded_hal_1::i2c::ErrorKind {
-            match *self {
-                Self::Bus => embedded_hal_1::i2c::ErrorKind::Bus,
-                Self::Arbitration => embedded_hal_1::i2c::ErrorKind::ArbitrationLoss,
-                Self::Nack => {
-                    embedded_hal_1::i2c::ErrorKind::NoAcknowledge(embedded_hal_1::i2c::NoAcknowledgeSource::Unknown)
-                }
-                Self::Timeout => embedded_hal_1::i2c::ErrorKind::Other,
-                Self::Crc => embedded_hal_1::i2c::ErrorKind::Other,
-                Self::Overrun => embedded_hal_1::i2c::ErrorKind::Overrun,
-                Self::ZeroLengthTransfer => embedded_hal_1::i2c::ErrorKind::Other,
-            }
-        }
-    }
-
-    impl<'d, T: Instance, TXDMA, RXDMA> embedded_hal_1::i2c::ErrorType for I2c<'d, T, TXDMA, RXDMA> {
-        type Error = Error;
-    }
-
-    impl<'d, T: Instance> embedded_hal_1::i2c::I2c for I2c<'d, T, NoDma, NoDma> {
-        fn read(&mut self, address: u8, read: &mut [u8]) -> Result<(), Self::Error> {
-            self.blocking_read(address, read)
-        }
-
-        fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Self::Error> {
-            self.blocking_write(address, write)
-        }
-
-        fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
-            self.blocking_write_read(address, write, read)
-        }
-
-        fn transaction(
-            &mut self,
-            _address: u8,
-            _operations: &mut [embedded_hal_1::i2c::Operation<'_>],
-        ) -> Result<(), Self::Error> {
-            todo!();
-        }
-    }
-}
-
-#[cfg(all(feature = "unstable-traits", feature = "nightly"))]
-mod eha {
-    use super::super::{RxDma, TxDma};
-    use super::*;
-
-    impl<'d, T: Instance, TXDMA: TxDma<T>, RXDMA: RxDma<T>> embedded_hal_async::i2c::I2c for I2c<'d, T, TXDMA, RXDMA> {
-        async fn read(&mut self, address: u8, read: &mut [u8]) -> Result<(), Self::Error> {
-            self.read(address, read).await
-        }
-
-        async fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Self::Error> {
-            self.write(address, write).await
-        }
-
-        async fn write_read(&mut self, address: u8, write: &[u8], read: &mut [u8]) -> Result<(), Self::Error> {
-            self.write_read(address, write, read).await
-        }
-
-        async fn transaction(
-            &mut self,
-            address: u8,
-            operations: &mut [embedded_hal_1::i2c::Operation<'_>],
-        ) -> Result<(), Self::Error> {
-            let _ = address;
-            let _ = operations;
-            todo!()
-        }
-    }
-}
-
 impl<'d, T: Instance> SetConfig for I2c<'d, T> {
     type Config = Hertz;
     type ConfigError = ();

embassy-stm32/src/rcc/f3.rs

@@ -346,10 +346,7 @@ fn calc_pll(config: &Config, Hertz(sysclk): Hertz) -> (Hertz, PllConfig) {
         None => {
             cfg_if::cfg_if! {
                 // For some chips PREDIV is always two, and cannot be changed
-                if #[cfg(any(
-                        stm32f302xd, stm32f302xe, stm32f303xd,
-                        stm32f303xe, stm32f398xe
-                    ))] {
+                if #[cfg(any(flashsize_d, flashsize_e))] {
                     let (multiplier, divisor) = get_mul_div(sysclk, HSI_FREQ.0);
                     (
                         Hertz((HSI_FREQ.0 / divisor) * multiplier),

embassy-stm32/src/sdmmc/mod.rs

@@ -1457,8 +1457,8 @@ cfg_if::cfg_if! {
         macro_rules! kernel_clk {
             ($inst:ident) => {
                 critical_section::with(|_| unsafe {
-                    crate::rcc::get_freqs().pll1_q
-                }).expect("PLL48 is required for SDIO")
+                    unwrap!(crate::rcc::get_freqs().pll1_q)
+                })
             }
         }
     } else if #[cfg(stm32f7)] {
@@ -1469,7 +1469,7 @@ cfg_if::cfg_if! {
                     if sdmmcsel == crate::pac::rcc::vals::Sdmmcsel::SYS {
                         crate::rcc::get_freqs().sys
                     } else {
-                        crate::rcc::get_freqs().pll1_q.expect("PLL48 is required for SDMMC")
+                        unwrap!(crate::rcc::get_freqs().pll1_q)
                     }
                 })
             };
@@ -1479,7 +1479,7 @@ cfg_if::cfg_if! {
                     if sdmmcsel == crate::pac::rcc::vals::Sdmmcsel::SYS {
                         crate::rcc::get_freqs().sys
                     } else {
-                        crate::rcc::get_freqs().pll1_q.expect("PLL48 is required for SDMMC")
+                        unwrap!(crate::rcc::get_freqs().pll1_q)
                     }
                 })
             };

embassy-sync/Cargo.toml

@@ -35,7 +35,7 @@ futures-util = { version = "0.3.17", default-features = false }
 critical-section = "1.1"
 heapless = "0.8"
 cfg-if = "1.0.0"
-embedded-io-async = { version = "0.6.0", optional = true }
+embedded-io-async = { version = "0.6.1", optional = true }
 
 [dev-dependencies]
 futures-executor = { version = "0.3.17", features = [ "thread-pool" ] }

embassy-time/CHANGELOG.md

@@ -22,8 +22,8 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## 0.1.3 - 2023-08-28
 
-- Update `embedded-hal-async` to `1.0.0-rc.1`
-- Update `embedded-hal v1` to `1.0.0-rc.1`
+- Update `embedded-hal-async` to `1.0.0-rc.2`
+- Update `embedded-hal v1` to `1.0.0-rc.2`
 
 ## 0.1.2 - 2023-07-05
 

embassy-time/Cargo.toml

@@ -242,8 +242,8 @@ defmt = { version = "0.3", optional = true }
 log = { version = "0.4.14", optional = true }
 
 embedded-hal-02 = { package = "embedded-hal", version = "0.2.6" }
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.1", optional = true}
-embedded-hal-async = { version = "=1.0.0-rc.1", optional = true}
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2", optional = true}
+embedded-hal-async = { version = "=1.0.0-rc.2", optional = true}
 
 futures-util = { version = "0.3.17", default-features = false }
 critical-section = "1.1"

embassy-time/src/delay.rs

@@ -18,7 +18,11 @@ pub struct Delay;
 mod eh1 {
     use super::*;
 
-    impl embedded_hal_1::delay::DelayUs for Delay {
+    impl embedded_hal_1::delay::DelayNs for Delay {
+        fn delay_ns(&mut self, ns: u32) {
+            block_for(Duration::from_nanos(ns as u64))
+        }
+
         fn delay_us(&mut self, us: u32) {
             block_for(Duration::from_micros(us as u64))
         }
@@ -34,13 +38,17 @@ mod eha {
     use super::*;
     use crate::Timer;
 
-    impl embedded_hal_async::delay::DelayUs for Delay {
-        async fn delay_us(&mut self, micros: u32) {
-            Timer::after_micros(micros as _).await
+    impl embedded_hal_async::delay::DelayNs for Delay {
+        async fn delay_ns(&mut self, ns: u32) {
+            Timer::after_nanos(ns as _).await
         }
 
-        async fn delay_ms(&mut self, millis: u32) {
-            Timer::after_millis(millis as _).await
+        async fn delay_us(&mut self, us: u32) {
+            Timer::after_micros(us as _).await
+        }
+
+        async fn delay_ms(&mut self, ms: u32) {
+            Timer::after_millis(ms as _).await
         }
     }
 }

embassy-time/src/duration.rs

@@ -2,6 +2,7 @@ use core::fmt;
 use core::ops::{Add, AddAssign, Div, DivAssign, Mul, MulAssign, Sub, SubAssign};
 
 use super::{GCD_1K, GCD_1M, TICK_HZ};
+use crate::GCD_1G;
 
 #[derive(Debug, Default, Copy, Clone, PartialEq, Eq, PartialOrd, Ord)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
@@ -61,6 +62,14 @@ impl Duration {
         }
     }
 
+    /// Creates a duration from the specified number of nanoseconds, rounding up.
+    /// NOTE: Delays this small may be inaccurate.
+    pub const fn from_nanos(micros: u64) -> Duration {
+        Duration {
+            ticks: div_ceil(micros * (TICK_HZ / GCD_1G), 1_000_000_000 / GCD_1G),
+        }
+    }
+
     /// Creates a duration from the specified number of seconds, rounding down.
     pub const fn from_secs_floor(secs: u64) -> Duration {
         Duration { ticks: secs * TICK_HZ }

embassy-time/src/lib.rs

@@ -52,6 +52,7 @@ const fn gcd(a: u64, b: u64) -> u64 {
 
 pub(crate) const GCD_1K: u64 = gcd(TICK_HZ, 1_000);
 pub(crate) const GCD_1M: u64 = gcd(TICK_HZ, 1_000_000);
+pub(crate) const GCD_1G: u64 = gcd(TICK_HZ, 1_000_000_000);
 
 #[cfg(feature = "defmt-timestamp-uptime")]
 defmt::timestamp! {"{=u64:us}", Instant::now().as_micros() }

embassy-time/src/timer.rs

@@ -74,6 +74,15 @@ impl Timer {
         Self::after(Duration::from_ticks(ticks))
     }
 
+    /// Expire after the specified number of nanoseconds.
+    ///
+    /// This method is a convenience wrapper for calling `Timer::after(Duration::from_nanos())`.
+    /// For more details, refer to [`Timer::after()`] and [`Duration::from_nanos()`].
+    #[inline]
+    pub fn after_nanos(nanos: u64) -> Self {
+        Self::after(Duration::from_nanos(nanos))
+    }
+
     /// Expire after the specified number of microseconds.
     ///
     /// This method is a convenience wrapper for calling `Timer::after(Duration::from_micros())`.

embassy-usb-driver/README.md

@@ -4,7 +4,7 @@ This crate contains the driver traits for [`embassy-usb`]. HAL/BSP crates can im
 traits to add support for using `embassy-usb` for a given chip/platform.
 
 The traits are kept in a separate crate so that breaking changes in the higher-level [`embassy-usb`]
-APIs don't cause a semver-major bump of thsi crate. This allows existing HALs/BSPs to be used
+APIs don't cause a semver-major bump of this crate. This allows existing HALs/BSPs to be used
 with the newer `embassy-usb` without needing updates.
 
 If you're writing an application using USB, you should depend on the main [`embassy-usb`] crate

examples/nrf52840/Cargo.toml

@@ -21,10 +21,6 @@ nightly = [
     "embedded-io-async",
     "embedded-hal-bus/async",
     "embassy-net",
-    "embassy-lora",
-    "lora-phy",
-    "lorawan-device",
-    "lorawan",
 ]
 
 [dependencies]
@@ -36,11 +32,7 @@ embassy-nrf = { version = "0.1.0", path = "../../embassy-nrf", features = ["defm
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "tcp", "dhcpv4", "medium-ethernet"], optional = true }
 embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"], optional = true }
 embedded-io = { version = "0.6.0", features = ["defmt-03"]  }
-embedded-io-async = { version = "0.6.0", optional = true, features = ["defmt-03"] }
-embassy-lora = { version = "0.1.0", path = "../../embassy-lora", features = ["time", "defmt"], optional = true }
-lora-phy = { version = "2", optional = true }
-lorawan-device = { version = "0.11.0", default-features = false, features = ["async", "external-lora-phy"], optional = true }
-lorawan = { version = "0.7.4", default-features = false, features = ["default-crypto"], optional = true }
+embedded-io-async = { version = "0.6.1", optional = true, features = ["defmt-03"] }
 embassy-net-esp-hosted = { version = "0.1.0", path = "../../embassy-net-esp-hosted", features = ["defmt"], optional = true }
 embassy-net-enc28j60 = { version = "0.1.0", path = "../../embassy-net-enc28j60", features = ["defmt"], optional = true }
 
@@ -57,9 +49,9 @@ rand = { version = "0.8.4", default-features = false }
 embedded-storage = "0.3.0"
 usbd-hid = "0.6.0"
 serde = { version = "1.0.136", default-features = false }
-embedded-hal = { version = "1.0.0-rc.1" }
-embedded-hal-async = { version = "1.0.0-rc.1", optional = true }
-embedded-hal-bus = { version = "0.1.0-rc.1" }
+embedded-hal = { version = "1.0.0-rc.2" }
+embedded-hal-async = { version = "1.0.0-rc.2", optional = true }
+embedded-hal-bus = { version = "0.1.0-rc.2" }
 num-integer = { version = "0.1.45", default-features = false }
 microfft = "0.5.0"
 

examples/nrf52840/src/bin/lora_cad.rs

@@ -1,97 +0,0 @@
-//! This example runs on the RAK4631 WisBlock, which has an nRF52840 MCU and Semtech Sx126x radio.
-//! Other nrf/sx126x combinations may work with appropriate pin modifications.
-//! It demonstrates LORA CAD functionality.
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait)]
-
-use defmt::*;
-use embassy_executor::Spawner;
-use embassy_lora::iv::GenericSx126xInterfaceVariant;
-use embassy_nrf::gpio::{Input, Level, Output, OutputDrive, Pin as _, Pull};
-use embassy_nrf::{bind_interrupts, peripherals, spim};
-use embassy_time::{Delay, Timer};
-use lora_phy::mod_params::*;
-use lora_phy::sx1261_2::SX1261_2;
-use lora_phy::LoRa;
-use {defmt_rtt as _, panic_probe as _};
-
-const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
-
-bind_interrupts!(struct Irqs {
-    SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1 => spim::InterruptHandler<peripherals::TWISPI1>;
-});
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let p = embassy_nrf::init(Default::default());
-    let mut spi_config = spim::Config::default();
-    spi_config.frequency = spim::Frequency::M16;
-
-    let spim = spim::Spim::new(p.TWISPI1, Irqs, p.P1_11, p.P1_13, p.P1_12, spi_config);
-
-    let nss = Output::new(p.P1_10.degrade(), Level::High, OutputDrive::Standard);
-    let reset = Output::new(p.P1_06.degrade(), Level::High, OutputDrive::Standard);
-    let dio1 = Input::new(p.P1_15.degrade(), Pull::Down);
-    let busy = Input::new(p.P1_14.degrade(), Pull::Down);
-    let rf_switch_rx = Output::new(p.P1_05.degrade(), Level::Low, OutputDrive::Standard);
-    let rf_switch_tx = Output::new(p.P1_07.degrade(), Level::Low, OutputDrive::Standard);
-
-    let iv =
-        GenericSx126xInterfaceVariant::new(nss, reset, dio1, busy, Some(rf_switch_rx), Some(rf_switch_tx)).unwrap();
-
-    let mut lora = {
-        match LoRa::new(SX1261_2::new(BoardType::Rak4631Sx1262, spim, iv), false, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mut debug_indicator = Output::new(p.P1_03, Level::Low, OutputDrive::Standard);
-    let mut start_indicator = Output::new(p.P1_04, Level::Low, OutputDrive::Standard);
-
-    start_indicator.set_high();
-    Timer::after_secs(5).await;
-    start_indicator.set_low();
-
-    let mdltn_params = {
-        match lora.create_modulation_params(
-            SpreadingFactor::_10,
-            Bandwidth::_250KHz,
-            CodingRate::_4_8,
-            LORA_FREQUENCY_IN_HZ,
-        ) {
-            Ok(mp) => mp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    match lora.prepare_for_cad(&mdltn_params, true).await {
-        Ok(()) => {}
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    match lora.cad().await {
-        Ok(cad_activity_detected) => {
-            if cad_activity_detected {
-                info!("cad successful with activity detected")
-            } else {
-                info!("cad successful without activity detected")
-            }
-            debug_indicator.set_high();
-            Timer::after_secs(5).await;
-            debug_indicator.set_low();
-        }
-        Err(err) => info!("cad unsuccessful = {}", err),
-    }
-}

examples/nrf52840/src/bin/lora_lorawan.rs

@@ -1,82 +0,0 @@
-//! This example runs on the RAK4631 WisBlock, which has an nRF52840 MCU and Semtech Sx126x radio.
-//! Other nrf/sx126x combinations may work with appropriate pin modifications.
-//! It demonstrates LoRaWAN join functionality.
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait)]
-
-use defmt::*;
-use embassy_executor::Spawner;
-use embassy_lora::iv::GenericSx126xInterfaceVariant;
-use embassy_lora::LoraTimer;
-use embassy_nrf::gpio::{Input, Level, Output, OutputDrive, Pin as _, Pull};
-use embassy_nrf::rng::Rng;
-use embassy_nrf::{bind_interrupts, peripherals, rng, spim};
-use embassy_time::Delay;
-use lora_phy::mod_params::*;
-use lora_phy::sx1261_2::SX1261_2;
-use lora_phy::LoRa;
-use lorawan::default_crypto::DefaultFactory as Crypto;
-use lorawan_device::async_device::lora_radio::LoRaRadio;
-use lorawan_device::async_device::{region, Device, JoinMode};
-use lorawan_device::{AppEui, AppKey, DevEui};
-use {defmt_rtt as _, panic_probe as _};
-
-const LORAWAN_REGION: region::Region = region::Region::EU868; // warning: set this appropriately for the region
-
-bind_interrupts!(struct Irqs {
-    SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1 => spim::InterruptHandler<peripherals::TWISPI1>;
-    RNG => rng::InterruptHandler<peripherals::RNG>;
-});
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let p = embassy_nrf::init(Default::default());
-    let mut spi_config = spim::Config::default();
-    spi_config.frequency = spim::Frequency::M16;
-
-    let spim = spim::Spim::new(p.TWISPI1, Irqs, p.P1_11, p.P1_13, p.P1_12, spi_config);
-
-    let nss = Output::new(p.P1_10.degrade(), Level::High, OutputDrive::Standard);
-    let reset = Output::new(p.P1_06.degrade(), Level::High, OutputDrive::Standard);
-    let dio1 = Input::new(p.P1_15.degrade(), Pull::Down);
-    let busy = Input::new(p.P1_14.degrade(), Pull::Down);
-    let rf_switch_rx = Output::new(p.P1_05.degrade(), Level::Low, OutputDrive::Standard);
-    let rf_switch_tx = Output::new(p.P1_07.degrade(), Level::Low, OutputDrive::Standard);
-
-    let iv =
-        GenericSx126xInterfaceVariant::new(nss, reset, dio1, busy, Some(rf_switch_rx), Some(rf_switch_tx)).unwrap();
-
-    let lora = {
-        match LoRa::new(SX1261_2::new(BoardType::Rak4631Sx1262, spim, iv), true, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let radio = LoRaRadio::new(lora);
-    let region: region::Configuration = region::Configuration::new(LORAWAN_REGION);
-    let mut device: Device<_, Crypto, _, _> = Device::new(region, radio, LoraTimer::new(), Rng::new(p.RNG, Irqs));
-
-    defmt::info!("Joining LoRaWAN network");
-
-    // TODO: Adjust the EUI and Keys according to your network credentials
-    match device
-        .join(&JoinMode::OTAA {
-            deveui: DevEui::from([0, 0, 0, 0, 0, 0, 0, 0]),
-            appeui: AppEui::from([0, 0, 0, 0, 0, 0, 0, 0]),
-            appkey: AppKey::from([0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]),
-        })
-        .await
-    {
-        Ok(()) => defmt::info!("LoRaWAN network joined"),
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-}

examples/nrf52840/src/bin/lora_p2p_receive.rs

@@ -1,119 +0,0 @@
-//! This example runs on the RAK4631 WisBlock, which has an nRF52840 MCU and Semtech Sx126x radio.
-//! Other nrf/sx126x combinations may work with appropriate pin modifications.
-//! It demonstrates LORA P2P receive functionality in conjunction with the lora_p2p_send example.
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait)]
-
-use defmt::*;
-use embassy_executor::Spawner;
-use embassy_lora::iv::GenericSx126xInterfaceVariant;
-use embassy_nrf::gpio::{Input, Level, Output, OutputDrive, Pin as _, Pull};
-use embassy_nrf::{bind_interrupts, peripherals, spim};
-use embassy_time::{Delay, Timer};
-use lora_phy::mod_params::*;
-use lora_phy::sx1261_2::SX1261_2;
-use lora_phy::LoRa;
-use {defmt_rtt as _, panic_probe as _};
-
-const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
-
-bind_interrupts!(struct Irqs {
-    SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1 => spim::InterruptHandler<peripherals::TWISPI1>;
-});
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let p = embassy_nrf::init(Default::default());
-    let mut spi_config = spim::Config::default();
-    spi_config.frequency = spim::Frequency::M16;
-
-    let spim = spim::Spim::new(p.TWISPI1, Irqs, p.P1_11, p.P1_13, p.P1_12, spi_config);
-
-    let nss = Output::new(p.P1_10.degrade(), Level::High, OutputDrive::Standard);
-    let reset = Output::new(p.P1_06.degrade(), Level::High, OutputDrive::Standard);
-    let dio1 = Input::new(p.P1_15.degrade(), Pull::Down);
-    let busy = Input::new(p.P1_14.degrade(), Pull::Down);
-    let rf_switch_rx = Output::new(p.P1_05.degrade(), Level::Low, OutputDrive::Standard);
-    let rf_switch_tx = Output::new(p.P1_07.degrade(), Level::Low, OutputDrive::Standard);
-
-    let iv =
-        GenericSx126xInterfaceVariant::new(nss, reset, dio1, busy, Some(rf_switch_rx), Some(rf_switch_tx)).unwrap();
-
-    let mut lora = {
-        match LoRa::new(SX1261_2::new(BoardType::Rak4631Sx1262, spim, iv), false, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mut debug_indicator = Output::new(p.P1_03, Level::Low, OutputDrive::Standard);
-    let mut start_indicator = Output::new(p.P1_04, Level::Low, OutputDrive::Standard);
-
-    start_indicator.set_high();
-    Timer::after_secs(5).await;
-    start_indicator.set_low();
-
-    let mut receiving_buffer = [00u8; 100];
-
-    let mdltn_params = {
-        match lora.create_modulation_params(
-            SpreadingFactor::_10,
-            Bandwidth::_250KHz,
-            CodingRate::_4_8,
-            LORA_FREQUENCY_IN_HZ,
-        ) {
-            Ok(mp) => mp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let rx_pkt_params = {
-        match lora.create_rx_packet_params(4, false, receiving_buffer.len() as u8, true, false, &mdltn_params) {
-            Ok(pp) => pp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    match lora
-        .prepare_for_rx(&mdltn_params, &rx_pkt_params, None, None, false)
-        .await
-    {
-        Ok(()) => {}
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    loop {
-        receiving_buffer = [00u8; 100];
-        match lora.rx(&rx_pkt_params, &mut receiving_buffer).await {
-            Ok((received_len, _rx_pkt_status)) => {
-                if (received_len == 3)
-                    && (receiving_buffer[0] == 0x01u8)
-                    && (receiving_buffer[1] == 0x02u8)
-                    && (receiving_buffer[2] == 0x03u8)
-                {
-                    info!("rx successful");
-                    debug_indicator.set_high();
-                    Timer::after_secs(5).await;
-                    debug_indicator.set_low();
-                } else {
-                    info!("rx unknown packet");
-                }
-            }
-            Err(err) => info!("rx unsuccessful = {}", err),
-        }
-    }
-}

examples/nrf52840/src/bin/lora_p2p_receive_duty_cycle.rs

@@ -1,127 +0,0 @@
-//! This example runs on the RAK4631 WisBlock, which has an nRF52840 MCU and Semtech Sx126x radio.
-//! Other nrf/sx126x combinations may work with appropriate pin modifications.
-//! It demonstrates LoRa Rx duty cycle functionality in conjunction with the lora_p2p_send example.
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait)]
-
-use defmt::*;
-use embassy_executor::Spawner;
-use embassy_lora::iv::GenericSx126xInterfaceVariant;
-use embassy_nrf::gpio::{Input, Level, Output, OutputDrive, Pin as _, Pull};
-use embassy_nrf::{bind_interrupts, peripherals, spim};
-use embassy_time::{Delay, Timer};
-use lora_phy::mod_params::*;
-use lora_phy::sx1261_2::SX1261_2;
-use lora_phy::LoRa;
-use {defmt_rtt as _, panic_probe as _};
-
-const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
-
-bind_interrupts!(struct Irqs {
-    SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1 => spim::InterruptHandler<peripherals::TWISPI1>;
-});
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let p = embassy_nrf::init(Default::default());
-    let mut spi_config = spim::Config::default();
-    spi_config.frequency = spim::Frequency::M16;
-
-    let spim = spim::Spim::new(p.TWISPI1, Irqs, p.P1_11, p.P1_13, p.P1_12, spi_config);
-
-    let nss = Output::new(p.P1_10.degrade(), Level::High, OutputDrive::Standard);
-    let reset = Output::new(p.P1_06.degrade(), Level::High, OutputDrive::Standard);
-    let dio1 = Input::new(p.P1_15.degrade(), Pull::Down);
-    let busy = Input::new(p.P1_14.degrade(), Pull::Down);
-    let rf_switch_rx = Output::new(p.P1_05.degrade(), Level::Low, OutputDrive::Standard);
-    let rf_switch_tx = Output::new(p.P1_07.degrade(), Level::Low, OutputDrive::Standard);
-
-    let iv =
-        GenericSx126xInterfaceVariant::new(nss, reset, dio1, busy, Some(rf_switch_rx), Some(rf_switch_tx)).unwrap();
-
-    let mut lora = {
-        match LoRa::new(SX1261_2::new(BoardType::Rak4631Sx1262, spim, iv), false, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mut debug_indicator = Output::new(p.P1_03, Level::Low, OutputDrive::Standard);
-    let mut start_indicator = Output::new(p.P1_04, Level::Low, OutputDrive::Standard);
-
-    start_indicator.set_high();
-    Timer::after_secs(5).await;
-    start_indicator.set_low();
-
-    let mut receiving_buffer = [00u8; 100];
-
-    let mdltn_params = {
-        match lora.create_modulation_params(
-            SpreadingFactor::_10,
-            Bandwidth::_250KHz,
-            CodingRate::_4_8,
-            LORA_FREQUENCY_IN_HZ,
-        ) {
-            Ok(mp) => mp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let rx_pkt_params = {
-        match lora.create_rx_packet_params(4, false, receiving_buffer.len() as u8, true, false, &mdltn_params) {
-            Ok(pp) => pp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    // See "RM0453 Reference manual STM32WL5x advanced Arm®-based 32-bit MCUs with sub-GHz radio solution" for the best explanation of Rx duty cycle processing.
-    match lora
-        .prepare_for_rx(
-            &mdltn_params,
-            &rx_pkt_params,
-            None,
-            Some(&DutyCycleParams {
-                rx_time: 300_000,    // 300_000 units * 15.625 us/unit = 4.69 s
-                sleep_time: 200_000, // 200_000 units * 15.625 us/unit = 3.13 s
-            }),
-            false,
-        )
-        .await
-    {
-        Ok(()) => {}
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    receiving_buffer = [00u8; 100];
-    match lora.rx(&rx_pkt_params, &mut receiving_buffer).await {
-        Ok((received_len, _rx_pkt_status)) => {
-            if (received_len == 3)
-                && (receiving_buffer[0] == 0x01u8)
-                && (receiving_buffer[1] == 0x02u8)
-                && (receiving_buffer[2] == 0x03u8)
-            {
-                info!("rx successful");
-                debug_indicator.set_high();
-                Timer::after_secs(5).await;
-                debug_indicator.set_low();
-            } else {
-                info!("rx unknown packet")
-            }
-        }
-        Err(err) => info!("rx unsuccessful = {}", err),
-    }
-}

examples/nrf52840/src/bin/lora_p2p_send.rs

@@ -1,102 +0,0 @@
-//! This example runs on the RAK4631 WisBlock, which has an nRF52840 MCU and Semtech Sx126x radio.
-//! Other nrf/sx126x combinations may work with appropriate pin modifications.
-//! It demonstrates LORA P2P send functionality.
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait)]
-
-use defmt::*;
-use embassy_executor::Spawner;
-use embassy_lora::iv::GenericSx126xInterfaceVariant;
-use embassy_nrf::gpio::{Input, Level, Output, OutputDrive, Pin as _, Pull};
-use embassy_nrf::{bind_interrupts, peripherals, spim};
-use embassy_time::Delay;
-use lora_phy::mod_params::*;
-use lora_phy::sx1261_2::SX1261_2;
-use lora_phy::LoRa;
-use {defmt_rtt as _, panic_probe as _};
-
-const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
-
-bind_interrupts!(struct Irqs {
-    SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1 => spim::InterruptHandler<peripherals::TWISPI1>;
-});
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let p = embassy_nrf::init(Default::default());
-    let mut spi_config = spim::Config::default();
-    spi_config.frequency = spim::Frequency::M16;
-
-    let spim = spim::Spim::new(p.TWISPI1, Irqs, p.P1_11, p.P1_13, p.P1_12, spi_config);
-
-    let nss = Output::new(p.P1_10.degrade(), Level::High, OutputDrive::Standard);
-    let reset = Output::new(p.P1_06.degrade(), Level::High, OutputDrive::Standard);
-    let dio1 = Input::new(p.P1_15.degrade(), Pull::Down);
-    let busy = Input::new(p.P1_14.degrade(), Pull::Down);
-    let rf_switch_rx = Output::new(p.P1_05.degrade(), Level::Low, OutputDrive::Standard);
-    let rf_switch_tx = Output::new(p.P1_07.degrade(), Level::Low, OutputDrive::Standard);
-
-    let iv =
-        GenericSx126xInterfaceVariant::new(nss, reset, dio1, busy, Some(rf_switch_rx), Some(rf_switch_tx)).unwrap();
-
-    let mut lora = {
-        match LoRa::new(SX1261_2::new(BoardType::Rak4631Sx1262, spim, iv), false, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mdltn_params = {
-        match lora.create_modulation_params(
-            SpreadingFactor::_10,
-            Bandwidth::_250KHz,
-            CodingRate::_4_8,
-            LORA_FREQUENCY_IN_HZ,
-        ) {
-            Ok(mp) => mp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mut tx_pkt_params = {
-        match lora.create_tx_packet_params(4, false, true, false, &mdltn_params) {
-            Ok(pp) => pp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    match lora.prepare_for_tx(&mdltn_params, 20, false).await {
-        Ok(()) => {}
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    let buffer = [0x01u8, 0x02u8, 0x03u8];
-    match lora.tx(&mdltn_params, &mut tx_pkt_params, &buffer, 0xffffff).await {
-        Ok(()) => {
-            info!("TX DONE");
-        }
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    match lora.sleep(false).await {
-        Ok(()) => info!("Sleep successful"),
-        Err(err) => info!("Sleep unsuccessful = {}", err),
-    }
-}

examples/nrf5340/Cargo.toml

@@ -37,7 +37,7 @@ embassy-net = { version = "0.2.0", path = "../../embassy-net", features = [
 embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = [
     "defmt",
 ] }
-embedded-io-async = { version = "0.6.0" }
+embedded-io-async = { version = "0.6.1" }
 
 defmt = "0.3"
 defmt-rtt = "0.4"

examples/rp/Cargo.toml

@@ -16,10 +16,6 @@ embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defm
 embassy-net-wiznet = { version = "0.1.0", path = "../../embassy-net-wiznet", features = ["defmt"] }
 embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }
 embassy-usb-logger = { version = "0.1.0", path = "../../embassy-usb-logger" }
-embassy-lora = { version = "0.1.0", path = "../../embassy-lora", features = ["time", "defmt"] }
-lora-phy = { version = "2" }
-lorawan-device = { version = "0.11.0", default-features = false, features = ["async", "external-lora-phy"] }
-lorawan = { version = "0.7.4", default-features = false, features = ["default-crypto"] }
 cyw43 = { path = "../../cyw43", features = ["defmt", "firmware-logs"] }
 cyw43-pio = { path = "../../cyw43-pio", features = ["defmt", "overclock"] }
 
@@ -42,10 +38,10 @@ smart-leds = "0.3.0"
 heapless = "0.8"
 usbd-hid = "0.6.1"
 
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.1" }
-embedded-hal-async = "1.0.0-rc.1"
-embedded-hal-bus = { version = "0.1.0-rc.1", features = ["async"] }
-embedded-io-async = { version = "0.6.0", features = ["defmt-03"] }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
+embedded-hal-async = "1.0.0-rc.2"
+embedded-hal-bus = { version = "0.1.0-rc.2", features = ["async"] }
+embedded-io-async = { version = "0.6.1", features = ["defmt-03"] }
 embedded-storage = { version = "0.3" }
 static_cell = { version = "2", features = ["nightly"]}
 portable-atomic = { version = "1.5", features = ["critical-section"] }

examples/rp/src/bin/lora_lorawan.rs

@@ -1,74 +0,0 @@
-//! This example runs on the Raspberry Pi Pico with a Waveshare board containing a Semtech Sx1262 radio.
-//! It demonstrates LoRaWAN join functionality.
-
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait)]
-
-use defmt::*;
-use embassy_executor::Spawner;
-use embassy_lora::iv::GenericSx126xInterfaceVariant;
-use embassy_lora::LoraTimer;
-use embassy_rp::gpio::{Input, Level, Output, Pin, Pull};
-use embassy_rp::spi::{Config, Spi};
-use embassy_time::Delay;
-use lora_phy::mod_params::*;
-use lora_phy::sx1261_2::SX1261_2;
-use lora_phy::LoRa;
-use lorawan::default_crypto::DefaultFactory as Crypto;
-use lorawan_device::async_device::lora_radio::LoRaRadio;
-use lorawan_device::async_device::{region, Device, JoinMode};
-use lorawan_device::{AppEui, AppKey, DevEui};
-use {defmt_rtt as _, panic_probe as _};
-
-const LORAWAN_REGION: region::Region = region::Region::EU868; // warning: set this appropriately for the region
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let p = embassy_rp::init(Default::default());
-
-    let miso = p.PIN_12;
-    let mosi = p.PIN_11;
-    let clk = p.PIN_10;
-    let spi = Spi::new(p.SPI1, clk, mosi, miso, p.DMA_CH0, p.DMA_CH1, Config::default());
-
-    let nss = Output::new(p.PIN_3.degrade(), Level::High);
-    let reset = Output::new(p.PIN_15.degrade(), Level::High);
-    let dio1 = Input::new(p.PIN_20.degrade(), Pull::None);
-    let busy = Input::new(p.PIN_2.degrade(), Pull::None);
-
-    let iv = GenericSx126xInterfaceVariant::new(nss, reset, dio1, busy, None, None).unwrap();
-
-    let lora = {
-        match LoRa::new(SX1261_2::new(BoardType::RpPicoWaveshareSx1262, spi, iv), true, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let radio = LoRaRadio::new(lora);
-    let region: region::Configuration = region::Configuration::new(LORAWAN_REGION);
-    let mut device: Device<_, Crypto, _, _> = Device::new(region, radio, LoraTimer::new(), embassy_rp::clocks::RoscRng);
-
-    defmt::info!("Joining LoRaWAN network");
-
-    // TODO: Adjust the EUI and Keys according to your network credentials
-    match device
-        .join(&JoinMode::OTAA {
-            deveui: DevEui::from([0, 0, 0, 0, 0, 0, 0, 0]),
-            appeui: AppEui::from([0, 0, 0, 0, 0, 0, 0, 0]),
-            appkey: AppKey::from([0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]),
-        })
-        .await
-    {
-        Ok(()) => defmt::info!("LoRaWAN network joined"),
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-}

examples/rp/src/bin/lora_p2p_receive.rs

@@ -1,108 +0,0 @@
-//! This example runs on the Raspberry Pi Pico with a Waveshare board containing a Semtech Sx1262 radio.
-//! It demonstrates LORA P2P receive functionality in conjunction with the lora_p2p_send example.
-
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait)]
-
-use defmt::*;
-use embassy_executor::Spawner;
-use embassy_lora::iv::GenericSx126xInterfaceVariant;
-use embassy_rp::gpio::{Input, Level, Output, Pin, Pull};
-use embassy_rp::spi::{Config, Spi};
-use embassy_time::{Delay, Timer};
-use lora_phy::mod_params::*;
-use lora_phy::sx1261_2::SX1261_2;
-use lora_phy::LoRa;
-use {defmt_rtt as _, panic_probe as _};
-
-const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let p = embassy_rp::init(Default::default());
-
-    let miso = p.PIN_12;
-    let mosi = p.PIN_11;
-    let clk = p.PIN_10;
-    let spi = Spi::new(p.SPI1, clk, mosi, miso, p.DMA_CH0, p.DMA_CH1, Config::default());
-
-    let nss = Output::new(p.PIN_3.degrade(), Level::High);
-    let reset = Output::new(p.PIN_15.degrade(), Level::High);
-    let dio1 = Input::new(p.PIN_20.degrade(), Pull::None);
-    let busy = Input::new(p.PIN_2.degrade(), Pull::None);
-
-    let iv = GenericSx126xInterfaceVariant::new(nss, reset, dio1, busy, None, None).unwrap();
-
-    let mut lora = {
-        match LoRa::new(SX1261_2::new(BoardType::RpPicoWaveshareSx1262, spi, iv), false, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mut debug_indicator = Output::new(p.PIN_25, Level::Low);
-
-    let mut receiving_buffer = [00u8; 100];
-
-    let mdltn_params = {
-        match lora.create_modulation_params(
-            SpreadingFactor::_10,
-            Bandwidth::_250KHz,
-            CodingRate::_4_8,
-            LORA_FREQUENCY_IN_HZ,
-        ) {
-            Ok(mp) => mp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let rx_pkt_params = {
-        match lora.create_rx_packet_params(4, false, receiving_buffer.len() as u8, true, false, &mdltn_params) {
-            Ok(pp) => pp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    match lora
-        .prepare_for_rx(&mdltn_params, &rx_pkt_params, None, None, false)
-        .await
-    {
-        Ok(()) => {}
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    loop {
-        receiving_buffer = [00u8; 100];
-        match lora.rx(&rx_pkt_params, &mut receiving_buffer).await {
-            Ok((received_len, _rx_pkt_status)) => {
-                if (received_len == 3)
-                    && (receiving_buffer[0] == 0x01u8)
-                    && (receiving_buffer[1] == 0x02u8)
-                    && (receiving_buffer[2] == 0x03u8)
-                {
-                    info!("rx successful");
-                    debug_indicator.set_high();
-                    Timer::after_secs(5).await;
-                    debug_indicator.set_low();
-                } else {
-                    info!("rx unknown packet");
-                }
-            }
-            Err(err) => info!("rx unsuccessful = {}", err),
-        }
-    }
-}

examples/rp/src/bin/lora_p2p_send.rs

@@ -1,96 +0,0 @@
-//! This example runs on the Raspberry Pi Pico with a Waveshare board containing a Semtech Sx1262 radio.
-//! It demonstrates LORA P2P send functionality.
-
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait)]
-
-use defmt::*;
-use embassy_executor::Spawner;
-use embassy_lora::iv::GenericSx126xInterfaceVariant;
-use embassy_rp::gpio::{Input, Level, Output, Pin, Pull};
-use embassy_rp::spi::{Config, Spi};
-use embassy_time::Delay;
-use lora_phy::mod_params::*;
-use lora_phy::sx1261_2::SX1261_2;
-use lora_phy::LoRa;
-use {defmt_rtt as _, panic_probe as _};
-
-const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let p = embassy_rp::init(Default::default());
-
-    let miso = p.PIN_12;
-    let mosi = p.PIN_11;
-    let clk = p.PIN_10;
-    let spi = Spi::new(p.SPI1, clk, mosi, miso, p.DMA_CH0, p.DMA_CH1, Config::default());
-
-    let nss = Output::new(p.PIN_3.degrade(), Level::High);
-    let reset = Output::new(p.PIN_15.degrade(), Level::High);
-    let dio1 = Input::new(p.PIN_20.degrade(), Pull::None);
-    let busy = Input::new(p.PIN_2.degrade(), Pull::None);
-
-    let iv = GenericSx126xInterfaceVariant::new(nss, reset, dio1, busy, None, None).unwrap();
-
-    let mut lora = {
-        match LoRa::new(SX1261_2::new(BoardType::RpPicoWaveshareSx1262, spi, iv), false, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mdltn_params = {
-        match lora.create_modulation_params(
-            SpreadingFactor::_10,
-            Bandwidth::_250KHz,
-            CodingRate::_4_8,
-            LORA_FREQUENCY_IN_HZ,
-        ) {
-            Ok(mp) => mp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mut tx_pkt_params = {
-        match lora.create_tx_packet_params(4, false, true, false, &mdltn_params) {
-            Ok(pp) => pp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    match lora.prepare_for_tx(&mdltn_params, 20, false).await {
-        Ok(()) => {}
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    let buffer = [0x01u8, 0x02u8, 0x03u8];
-    match lora.tx(&mdltn_params, &mut tx_pkt_params, &buffer, 0xffffff).await {
-        Ok(()) => {
-            info!("TX DONE");
-        }
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    match lora.sleep(false).await {
-        Ok(()) => info!("Sleep successful"),
-        Err(err) => info!("Sleep unsuccessful = {}", err),
-    }
-}

examples/rp/src/bin/lora_p2p_send_multicore.rs

@@ -1,133 +0,0 @@
-//! This example runs on the Raspberry Pi Pico with a Waveshare board containing a Semtech Sx1262 radio.
-//! It demonstrates LORA P2P send functionality using the second core, with data provided by the first core.
-
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait)]
-
-use defmt::*;
-use embassy_executor::Executor;
-use embassy_lora::iv::GenericSx126xInterfaceVariant;
-use embassy_rp::gpio::{AnyPin, Input, Level, Output, Pin, Pull};
-use embassy_rp::multicore::{spawn_core1, Stack};
-use embassy_rp::peripherals::SPI1;
-use embassy_rp::spi::{Async, Config, Spi};
-use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex;
-use embassy_sync::channel::Channel;
-use embassy_time::{Delay, Timer};
-use lora_phy::mod_params::*;
-use lora_phy::sx1261_2::SX1261_2;
-use lora_phy::LoRa;
-use static_cell::StaticCell;
-use {defmt_rtt as _, panic_probe as _};
-
-static mut CORE1_STACK: Stack<4096> = Stack::new();
-static EXECUTOR0: StaticCell<Executor> = StaticCell::new();
-static EXECUTOR1: StaticCell<Executor> = StaticCell::new();
-static CHANNEL: Channel<CriticalSectionRawMutex, [u8; 3], 1> = Channel::new();
-
-const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
-
-#[cortex_m_rt::entry]
-fn main() -> ! {
-    let p = embassy_rp::init(Default::default());
-
-    let miso = p.PIN_12;
-    let mosi = p.PIN_11;
-    let clk = p.PIN_10;
-    let spi = Spi::new(p.SPI1, clk, mosi, miso, p.DMA_CH0, p.DMA_CH1, Config::default());
-
-    let nss = Output::new(p.PIN_3.degrade(), Level::High);
-    let reset = Output::new(p.PIN_15.degrade(), Level::High);
-    let dio1 = Input::new(p.PIN_20.degrade(), Pull::None);
-    let busy = Input::new(p.PIN_2.degrade(), Pull::None);
-
-    let iv = GenericSx126xInterfaceVariant::new(nss, reset, dio1, busy, None, None).unwrap();
-
-    spawn_core1(p.CORE1, unsafe { &mut CORE1_STACK }, move || {
-        let executor1 = EXECUTOR1.init(Executor::new());
-        executor1.run(|spawner| unwrap!(spawner.spawn(core1_task(spi, iv))));
-    });
-
-    let executor0 = EXECUTOR0.init(Executor::new());
-    executor0.run(|spawner| unwrap!(spawner.spawn(core0_task())));
-}
-
-#[embassy_executor::task]
-async fn core0_task() {
-    info!("Hello from core 0");
-    loop {
-        CHANNEL.send([0x01u8, 0x02u8, 0x03u8]).await;
-        Timer::after_millis(60 * 1000).await;
-    }
-}
-
-#[embassy_executor::task]
-async fn core1_task(
-    spi: Spi<'static, SPI1, Async>,
-    iv: GenericSx126xInterfaceVariant<Output<'static, AnyPin>, Input<'static, AnyPin>>,
-) {
-    info!("Hello from core 1");
-
-    let mut lora = {
-        match LoRa::new(SX1261_2::new(BoardType::RpPicoWaveshareSx1262, spi, iv), false, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mdltn_params = {
-        match lora.create_modulation_params(
-            SpreadingFactor::_10,
-            Bandwidth::_250KHz,
-            CodingRate::_4_8,
-            LORA_FREQUENCY_IN_HZ,
-        ) {
-            Ok(mp) => mp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mut tx_pkt_params = {
-        match lora.create_tx_packet_params(4, false, true, false, &mdltn_params) {
-            Ok(pp) => pp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    loop {
-        let buffer: [u8; 3] = CHANNEL.receive().await;
-        match lora.prepare_for_tx(&mdltn_params, 20, false).await {
-            Ok(()) => {}
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        };
-
-        match lora.tx(&mdltn_params, &mut tx_pkt_params, &buffer, 0xffffff).await {
-            Ok(()) => {
-                info!("TX DONE");
-            }
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        };
-
-        match lora.sleep(false).await {
-            Ok(()) => info!("Sleep successful"),
-            Err(err) => info!("Sleep unsuccessful = {}", err),
-        }
-    }
-}

examples/std/Cargo.toml

@@ -11,8 +11,8 @@ embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["lo
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features=[ "std", "nightly", "log", "medium-ethernet", "medium-ip", "tcp", "udp", "dns", "dhcpv4", "proto-ipv6"] }
 embassy-net-tuntap = { version = "0.1.0", path = "../../embassy-net-tuntap" }
 embassy-net-ppp = { version = "0.1.0", path = "../../embassy-net-ppp", features = ["log"]}
-embedded-io-async = { version = "0.6.0" }
-embedded-io-adapters = { version = "0.6.0", features = ["futures-03"] }
+embedded-io-async = { version = "0.6.1" }
+embedded-io-adapters = { version = "0.6.1", features = ["futures-03"] }
 critical-section = { version = "1.1", features = ["std"] }
 
 async-io = "1.6.0"

examples/stm32f4/Cargo.toml

@@ -20,7 +20,7 @@ cortex-m = { version = "0.7.6", features = ["inline-asm", "critical-section-sing
 cortex-m-rt = "0.7.0"
 embedded-hal = "0.2.6"
 embedded-io = { version = "0.6.0" }
-embedded-io-async = { version = "0.6.0" }
+embedded-io-async = { version = "0.6.1" }
 panic-probe = { version = "0.3", features = ["print-defmt"] }
 futures = { version = "0.3.17", default-features = false, features = ["async-await"] }
 heapless = { version = "0.8", default-features = false }

examples/stm32f4/src/bin/dac.rs

@@ -4,7 +4,7 @@
 
 use defmt::*;
 use embassy_executor::Spawner;
-use embassy_stm32::dac::{DacCh1, DacChannel, Value};
+use embassy_stm32::dac::{DacCh1, Value};
 use embassy_stm32::dma::NoDma;
 use {defmt_rtt as _, panic_probe as _};
 
@@ -14,11 +14,10 @@ async fn main(_spawner: Spawner) -> ! {
     info!("Hello World, dude!");
 
     let mut dac = DacCh1::new(p.DAC, NoDma, p.PA4);
-    unwrap!(dac.set_trigger_enable(false));
 
     loop {
         for v in 0..=255 {
-            unwrap!(dac.set(Value::Bit8(to_sine_wave(v))));
+            dac.set(Value::Bit8(to_sine_wave(v)));
         }
     }
 }

examples/stm32f4/src/bin/i2c.rs

@@ -14,7 +14,8 @@ const ADDRESS: u8 = 0x5F;
 const WHOAMI: u8 = 0x0F;
 
 bind_interrupts!(struct Irqs {
-    I2C2_EV => i2c::InterruptHandler<peripherals::I2C2>;
+    I2C2_EV => i2c::EventInterruptHandler<peripherals::I2C2>;
+    I2C2_ER => i2c::ErrorInterruptHandler<peripherals::I2C2>;
 });
 
 #[embassy_executor::main]

examples/stm32f4/src/bin/i2c_async.rs

@@ -0,0 +1,62 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+// Example originally designed for stm32f411ceu6 reading an A1454 hall effect sensor on I2C1
+// DMA peripherals changed to compile for stm32f429zi, for the CI.
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::i2c::I2c;
+use embassy_stm32::time::Hertz;
+use embassy_stm32::{bind_interrupts, i2c, peripherals};
+use {defmt_rtt as _, panic_probe as _};
+
+const ADDRESS: u8 = 96;
+
+bind_interrupts!(struct Irqs {
+    I2C1_EV => i2c::EventInterruptHandler<peripherals::I2C1>;
+    I2C1_ER => i2c::ErrorInterruptHandler<peripherals::I2C1>;
+});
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    info!("Hello world!");
+    let p = embassy_stm32::init(Default::default());
+
+    let mut i2c = I2c::new(
+        p.I2C1,
+        p.PB8,
+        p.PB7,
+        Irqs,
+        p.DMA1_CH6,
+        p.DMA1_CH0,
+        Hertz(100_000),
+        Default::default(),
+    );
+
+    loop {
+        let a1454_read_sensor_command = [0x1F];
+        let mut sensor_data_buffer: [u8; 4] = [0, 0, 0, 0];
+
+        match i2c
+            .write_read(ADDRESS, &a1454_read_sensor_command, &mut sensor_data_buffer)
+            .await
+        {
+            Ok(()) => {
+                // Convert 12-bit signed integer into 16-bit signed integer.
+                // Is the 12 bit number negative?
+                if (sensor_data_buffer[2] & 0b00001000) == 0b0001000 {
+                    sensor_data_buffer[2] = sensor_data_buffer[2] | 0b11110000;
+                }
+
+                let mut sensor_value_raw: u16 = sensor_data_buffer[3].into();
+                sensor_value_raw |= (sensor_data_buffer[2] as u16) << 8;
+                let sensor_value: u16 = sensor_value_raw.into();
+                let sensor_value = sensor_value as i16;
+                info!("Data: {}", sensor_value);
+            }
+            Err(e) => error!("I2C Error during read: {:?}", e),
+        }
+    }
+}

examples/stm32f4/src/bin/i2c_comparison.rs

@@ -0,0 +1,135 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+// Example originally designed for stm32f411ceu6 with three A1454 hall effect sensors, connected to I2C1, 2 and 3
+// on the pins referenced in the peripheral definitions.
+// Pins and DMA peripherals changed to compile for stm32f429zi, to work with the CI.
+// MUST be compiled in release mode to see actual performance, otherwise the async transactions take 2x
+// as long to complete as the blocking ones!
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::i2c::I2c;
+use embassy_stm32::time::Hertz;
+use embassy_stm32::{bind_interrupts, i2c, peripherals};
+use embassy_time::Instant;
+use futures::future::try_join3;
+use {defmt_rtt as _, panic_probe as _};
+
+const ADDRESS: u8 = 96;
+
+bind_interrupts!(struct Irqs {
+    I2C1_EV => i2c::EventInterruptHandler<peripherals::I2C1>;
+    I2C1_ER => i2c::ErrorInterruptHandler<peripherals::I2C1>;
+    I2C2_EV => i2c::EventInterruptHandler<peripherals::I2C2>;
+    I2C2_ER => i2c::ErrorInterruptHandler<peripherals::I2C2>;
+    I2C3_EV => i2c::EventInterruptHandler<peripherals::I2C3>;
+    I2C3_ER => i2c::ErrorInterruptHandler<peripherals::I2C3>;
+});
+
+/// Convert 12-bit signed integer within a 4 byte long buffer into 16-bit signed integer.
+fn a1454_buf_to_i16(buffer: &[u8; 4]) -> i16 {
+    let lower = buffer[3];
+    let mut upper = buffer[2];
+    // Fill in additional 1s if the 12 bit number is negative.
+    if (upper & 0b00001000) == 0b0001000 {
+        upper = upper | 0b11110000;
+    }
+
+    let mut sensor_value_raw: u16 = lower.into();
+    sensor_value_raw |= (upper as u16) << 8;
+    let sensor_value: u16 = sensor_value_raw.into();
+    let sensor_value = sensor_value as i16;
+    sensor_value
+}
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    info!("Setting up peripherals.");
+    let p = embassy_stm32::init(Default::default());
+
+    let mut i2c1 = I2c::new(
+        p.I2C1,
+        p.PB8,
+        p.PB7,
+        Irqs,
+        p.DMA1_CH6,
+        p.DMA1_CH0,
+        Hertz(100_000),
+        Default::default(),
+    );
+
+    let mut i2c2 = I2c::new(
+        p.I2C2,
+        p.PB10,
+        p.PB11,
+        Irqs,
+        p.DMA1_CH7,
+        p.DMA1_CH3,
+        Hertz(100_000),
+        Default::default(),
+    );
+
+    let mut i2c3 = I2c::new(
+        p.I2C3,
+        p.PA8,
+        p.PC9,
+        Irqs,
+        p.DMA1_CH4,
+        p.DMA1_CH2,
+        Hertz(100_000),
+        Default::default(),
+    );
+
+    let a1454_read_sensor_command = [0x1F];
+    let mut i2c1_buffer: [u8; 4] = [0, 0, 0, 0];
+    let mut i2c2_buffer: [u8; 4] = [0, 0, 0, 0];
+    let mut i2c3_buffer: [u8; 4] = [0, 0, 0, 0];
+    loop {
+        // Blocking reads one after the other. Completes in about 2000us.
+        let blocking_read_start_us = Instant::now().as_micros();
+        match i2c1.blocking_write_read(ADDRESS, &a1454_read_sensor_command, &mut i2c1_buffer) {
+            Ok(()) => {}
+            Err(e) => error!("I2C Error: {:?}", e),
+        }
+        match i2c2.blocking_write_read(ADDRESS, &a1454_read_sensor_command, &mut i2c2_buffer) {
+            Ok(()) => {}
+            Err(e) => error!("I2C Error: {:?}", e),
+        }
+        match i2c3.blocking_write_read(ADDRESS, &a1454_read_sensor_command, &mut i2c3_buffer) {
+            Ok(()) => {}
+            Err(e) => error!("I2C Error: {:?}", e),
+        }
+        let blocking_read_total_us = Instant::now().as_micros() - blocking_read_start_us;
+        info!(
+            "Blocking reads completed in {}us: i2c1: {} i2c2: {} i2c3: {}",
+            blocking_read_total_us,
+            a1454_buf_to_i16(&i2c1_buffer),
+            a1454_buf_to_i16(&i2c2_buffer),
+            a1454_buf_to_i16(&i2c3_buffer)
+        );
+
+        // Async reads overlapping. Completes in about 1000us.
+        let async_read_start_us = Instant::now().as_micros();
+
+        let i2c1_result = i2c1.write_read(ADDRESS, &a1454_read_sensor_command, &mut i2c1_buffer);
+        let i2c2_result = i2c2.write_read(ADDRESS, &a1454_read_sensor_command, &mut i2c2_buffer);
+        let i2c3_result = i2c3.write_read(ADDRESS, &a1454_read_sensor_command, &mut i2c3_buffer);
+
+        // Wait for all three transactions to finish, or any one of them to fail.
+        match try_join3(i2c1_result, i2c2_result, i2c3_result).await {
+            Ok(_) => {
+                let async_read_total_us = Instant::now().as_micros() - async_read_start_us;
+                info!(
+                    "Async reads completed in {}us: i2c1: {} i2c2: {} i2c3: {}",
+                    async_read_total_us,
+                    a1454_buf_to_i16(&i2c1_buffer),
+                    a1454_buf_to_i16(&i2c2_buffer),
+                    a1454_buf_to_i16(&i2c3_buffer)
+                );
+            }
+            Err(e) => error!("I2C Error during async write-read: {}", e),
+        };
+    }
+}

examples/stm32f7/Cargo.toml

@@ -11,7 +11,7 @@ embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["de
 embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "nightly", "tcp", "dhcpv4", "medium-ethernet"] }
-embedded-io-async = { version = "0.6.0" }
+embedded-io-async = { version = "0.6.1" }
 embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"] }
 
 defmt = "0.3"

examples/stm32h5/Cargo.toml

@@ -11,7 +11,7 @@ embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["de
 embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "unstable-traits", "tick-hz-32_768"] }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "nightly", "tcp", "dhcpv4", "medium-ethernet", "proto-ipv6"] }
-embedded-io-async = { version = "0.6.0" }
+embedded-io-async = { version = "0.6.1" }
 embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"] }
 
 defmt = "0.3"
@@ -20,9 +20,9 @@ defmt-rtt = "0.4"
 cortex-m = { version = "0.7.6", features = ["inline-asm", "critical-section-single-core"] }
 cortex-m-rt = "0.7.0"
 embedded-hal = "0.2.6"
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.1" }
-embedded-hal-async = { version = "=1.0.0-rc.1" }
-embedded-nal-async = { version = "0.7" }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
+embedded-hal-async = { version = "=1.0.0-rc.2" }
+embedded-nal-async = { version = "0.7.1" }
 panic-probe = { version = "0.3", features = ["print-defmt"] }
 futures = { version = "0.3.17", default-features = false, features = ["async-await"] }
 heapless = { version = "0.8", default-features = false }

examples/stm32h5/src/bin/i2c.rs

@@ -13,7 +13,8 @@ const ADDRESS: u8 = 0x5F;
 const WHOAMI: u8 = 0x0F;
 
 bind_interrupts!(struct Irqs {
-    I2C2_EV => i2c::InterruptHandler<peripherals::I2C2>;
+    I2C2_EV => i2c::EventInterruptHandler<peripherals::I2C2>;
+    I2C2_ER => i2c::ErrorInterruptHandler<peripherals::I2C2>;
 });
 
 #[embassy_executor::main]

examples/stm32h7/Cargo.toml

@@ -11,7 +11,7 @@ embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["de
 embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "unstable-traits", "tick-hz-32_768"] }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "nightly", "tcp", "dhcpv4", "medium-ethernet", "proto-ipv6", "dns"] }
-embedded-io-async = { version = "0.6.0" }
+embedded-io-async = { version = "0.6.1" }
 embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defmt"] }
 
 defmt = "0.3"
@@ -20,9 +20,9 @@ defmt-rtt = "0.4"
 cortex-m = { version = "0.7.6", features = ["inline-asm", "critical-section-single-core"] }
 cortex-m-rt = "0.7.0"
 embedded-hal = "0.2.6"
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.1" }
-embedded-hal-async = { version = "=1.0.0-rc.1" }
-embedded-nal-async = { version = "0.7" }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
+embedded-hal-async = { version = "=1.0.0-rc.2" }
+embedded-nal-async = { version = "0.7.1" }
 panic-probe = { version = "0.3", features = ["print-defmt"] }
 futures = { version = "0.3.17", default-features = false, features = ["async-await"] }
 heapless = { version = "0.8", default-features = false }

examples/stm32h7/src/bin/camera.rs

@@ -19,7 +19,8 @@ const HEIGHT: usize = 100;
 static mut FRAME: [u32; WIDTH * HEIGHT / 2] = [0u32; WIDTH * HEIGHT / 2];
 
 bind_interrupts!(struct Irqs {
-    I2C1_EV => i2c::InterruptHandler<peripherals::I2C1>;
+    I2C1_EV => i2c::EventInterruptHandler<peripherals::I2C1>;
+    I2C1_ER => i2c::ErrorInterruptHandler<peripherals::I2C1>;
     DCMI => dcmi::InterruptHandler<peripherals::DCMI>;
 });
 

examples/stm32h7/src/bin/dac.rs

@@ -4,7 +4,7 @@
 
 use cortex_m_rt::entry;
 use defmt::*;
-use embassy_stm32::dac::{DacCh1, DacChannel, Value};
+use embassy_stm32::dac::{DacCh1, Value};
 use embassy_stm32::dma::NoDma;
 use embassy_stm32::Config;
 use {defmt_rtt as _, panic_probe as _};
@@ -46,11 +46,10 @@ fn main() -> ! {
     let p = embassy_stm32::init(config);
 
     let mut dac = DacCh1::new(p.DAC1, NoDma, p.PA4);
-    unwrap!(dac.set_trigger_enable(false));
 
     loop {
         for v in 0..=255 {
-            unwrap!(dac.set(Value::Bit8(to_sine_wave(v))));
+            dac.set(Value::Bit8(to_sine_wave(v)));
         }
     }
 }

examples/stm32h7/src/bin/dac_dma.rs

@@ -4,21 +4,15 @@
 
 use defmt::*;
 use embassy_executor::Spawner;
-use embassy_stm32::dac::{DacChannel, ValueArray};
+use embassy_stm32::dac::{DacCh1, DacCh2, ValueArray};
 use embassy_stm32::pac::timer::vals::{Mms, Opm};
-use embassy_stm32::peripherals::{TIM6, TIM7};
+use embassy_stm32::peripherals::{DAC1, DMA1_CH3, DMA1_CH4, TIM6, TIM7};
 use embassy_stm32::rcc::low_level::RccPeripheral;
 use embassy_stm32::time::Hertz;
 use embassy_stm32::timer::low_level::Basic16bitInstance;
 use micromath::F32Ext;
 use {defmt_rtt as _, panic_probe as _};
 
-pub type Dac1Type =
-    embassy_stm32::dac::DacCh1<'static, embassy_stm32::peripherals::DAC1, embassy_stm32::peripherals::DMA1_CH3>;
-
-pub type Dac2Type =
-    embassy_stm32::dac::DacCh2<'static, embassy_stm32::peripherals::DAC1, embassy_stm32::peripherals::DMA1_CH4>;
-
 #[embassy_executor::main]
 async fn main(spawner: Spawner) {
     let mut config = embassy_stm32::Config::default();
@@ -63,7 +57,7 @@ async fn main(spawner: Spawner) {
 }
 
 #[embassy_executor::task]
-async fn dac_task1(mut dac: Dac1Type) {
+async fn dac_task1(mut dac: DacCh1<'static, DAC1, DMA1_CH3>) {
     let data: &[u8; 256] = &calculate_array::<256>();
 
     info!("TIM6 frequency is {}", TIM6::frequency());
@@ -77,8 +71,9 @@ async fn dac_task1(mut dac: Dac1Type) {
         error!("Reload value {} below threshold!", reload);
     }
 
-    dac.select_trigger(embassy_stm32::dac::Ch1Trigger::Tim6).unwrap();
-    dac.enable_channel().unwrap();
+    dac.set_trigger(embassy_stm32::dac::TriggerSel::Tim6);
+    dac.set_triggering(true);
+    dac.enable();
 
     TIM6::enable_and_reset();
     TIM6::regs().arr().modify(|w| w.set_arr(reload as u16 - 1));
@@ -100,14 +95,12 @@ async fn dac_task1(mut dac: Dac1Type) {
     // Loop technically not necessary if DMA circular mode is enabled
     loop {
         info!("Loop DAC1");
-        if let Err(e) = dac.write(ValueArray::Bit8(data), true).await {
-            error!("Could not write to dac: {}", e);
-        }
+        dac.write(ValueArray::Bit8(data), true).await;
     }
 }
 
 #[embassy_executor::task]
-async fn dac_task2(mut dac: Dac2Type) {
+async fn dac_task2(mut dac: DacCh2<'static, DAC1, DMA1_CH4>) {
     let data: &[u8; 256] = &calculate_array::<256>();
 
     info!("TIM7 frequency is {}", TIM7::frequency());
@@ -127,7 +120,9 @@ async fn dac_task2(mut dac: Dac2Type) {
         w.set_cen(true);
     });
 
-    dac.select_trigger(embassy_stm32::dac::Ch2Trigger::Tim7).unwrap();
+    dac.set_trigger(embassy_stm32::dac::TriggerSel::Tim7);
+    dac.set_triggering(true);
+    dac.enable();
 
     debug!(
         "TIM7 Frequency {}, Target Frequency {}, Reload {}, Reload as u16 {}, Samples {}",
@@ -138,9 +133,7 @@ async fn dac_task2(mut dac: Dac2Type) {
         data.len()
     );
 
-    if let Err(e) = dac.write(ValueArray::Bit8(data), true).await {
-        error!("Could not write to dac: {}", e);
-    }
+    dac.write(ValueArray::Bit8(data), true).await;
 }
 
 fn to_sine_wave(v: u8) -> u8 {

examples/stm32h7/src/bin/i2c.rs

@@ -13,7 +13,8 @@ const ADDRESS: u8 = 0x5F;
 const WHOAMI: u8 = 0x0F;
 
 bind_interrupts!(struct Irqs {
-    I2C2_EV => i2c::InterruptHandler<peripherals::I2C2>;
+    I2C2_EV => i2c::EventInterruptHandler<peripherals::I2C2>;
+    I2C2_ER => i2c::ErrorInterruptHandler<peripherals::I2C2>;
 });
 
 #[embassy_executor::main]

examples/stm32l0/Cargo.toml

@@ -6,8 +6,7 @@ license = "MIT OR Apache-2.0"
 
 [features]
 default = ["nightly"]
-nightly = ["embassy-stm32/nightly", "embassy-time/nightly", "embassy-time/unstable-traits", "embassy-executor/nightly",
-           "embassy-lora", "lora-phy", "lorawan-device", "lorawan", "dep:embedded-io-async"]
+nightly = ["embassy-stm32/nightly", "embassy-time/nightly", "embassy-time/unstable-traits", "embassy-executor/nightly", "dep:embedded-io-async"]
 
 [dependencies]
 # Change stm32l072cz to your chip name, if necessary.
@@ -15,17 +14,13 @@ embassy-stm32 = { version = "0.1.0", path = "../../embassy-stm32", features = ["
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
 embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
-embassy-lora = { version = "0.1.0", path = "../../embassy-lora", features = ["time", "defmt"], optional = true }
-lora-phy = { version = "2", optional = true }
-lorawan-device = { version = "0.11.0", default-features = false, features = ["async", "external-lora-phy"], optional = true }
-lorawan = { version = "0.7.4", default-features = false, features = ["default-crypto"], optional = true }
 
 defmt = "0.3"
 defmt-rtt = "0.4"
 
 embedded-storage = "0.3.0"
 embedded-io = { version = "0.6.0" }
-embedded-io-async = { version = "0.6.0", optional = true }
+embedded-io-async = { version = "0.6.1", optional = true }
 
 cortex-m = { version = "0.7.6", features = ["inline-asm", "critical-section-single-core"] }
 cortex-m-rt = "0.7.0"

examples/stm32l0/src/bin/lora_cad.rs

@@ -1,97 +0,0 @@
-//! This example runs on the STM32 LoRa Discovery board, which has a builtin Semtech Sx1276 radio.
-//! It demonstrates LORA P2P CAD functionality.
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait)]
-
-use defmt::*;
-use embassy_executor::Spawner;
-use embassy_lora::iv::Stm32l0InterfaceVariant;
-use embassy_stm32::exti::{Channel, ExtiInput};
-use embassy_stm32::gpio::{Input, Level, Output, Pin, Pull, Speed};
-use embassy_stm32::spi;
-use embassy_stm32::time::khz;
-use embassy_time::{Delay, Timer};
-use lora_phy::mod_params::*;
-use lora_phy::sx1276_7_8_9::SX1276_7_8_9;
-use lora_phy::LoRa;
-use {defmt_rtt as _, panic_probe as _};
-
-const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let mut config = embassy_stm32::Config::default();
-    config.rcc.hsi = true;
-    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSI;
-    let p = embassy_stm32::init(config);
-
-    let mut spi_config = spi::Config::default();
-    spi_config.frequency = khz(200);
-
-    // SPI for sx1276
-    let spi = spi::Spi::new(p.SPI1, p.PB3, p.PA7, p.PA6, p.DMA1_CH3, p.DMA1_CH2, spi_config);
-
-    let nss = Output::new(p.PA15.degrade(), Level::High, Speed::Low);
-    let reset = Output::new(p.PC0.degrade(), Level::High, Speed::Low);
-
-    let irq_pin = Input::new(p.PB4.degrade(), Pull::Up);
-    let irq = ExtiInput::new(irq_pin, p.EXTI4.degrade());
-
-    let iv = Stm32l0InterfaceVariant::new(nss, reset, irq, None, None).unwrap();
-
-    let mut lora = {
-        match LoRa::new(SX1276_7_8_9::new(BoardType::Stm32l0Sx1276, spi, iv), false, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mut debug_indicator = Output::new(p.PB5, Level::Low, Speed::Low);
-    let mut start_indicator = Output::new(p.PB6, Level::Low, Speed::Low);
-
-    start_indicator.set_high();
-    Timer::after_secs(5).await;
-    start_indicator.set_low();
-
-    let mdltn_params = {
-        match lora.create_modulation_params(
-            SpreadingFactor::_10,
-            Bandwidth::_250KHz,
-            CodingRate::_4_8,
-            LORA_FREQUENCY_IN_HZ,
-        ) {
-            Ok(mp) => mp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    match lora.prepare_for_cad(&mdltn_params, true).await {
-        Ok(()) => {}
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    match lora.cad().await {
-        Ok(cad_activity_detected) => {
-            if cad_activity_detected {
-                info!("cad successful with activity detected")
-            } else {
-                info!("cad successful without activity detected")
-            }
-            debug_indicator.set_high();
-            Timer::after_secs(5).await;
-            debug_indicator.set_low();
-        }
-        Err(err) => info!("cad unsuccessful = {}", err),
-    }
-}

examples/stm32l0/src/bin/lora_lorawan.rs

@@ -1,85 +0,0 @@
-//! This example runs on the STM32 LoRa Discovery board, which has a builtin Semtech Sx1276 radio.
-//! It demonstrates LoRaWAN join functionality.
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait)]
-
-use defmt::*;
-use embassy_executor::Spawner;
-use embassy_lora::iv::Stm32l0InterfaceVariant;
-use embassy_lora::LoraTimer;
-use embassy_stm32::exti::{Channel, ExtiInput};
-use embassy_stm32::gpio::{Input, Level, Output, Pin, Pull, Speed};
-use embassy_stm32::rng::Rng;
-use embassy_stm32::time::khz;
-use embassy_stm32::{bind_interrupts, peripherals, rng, spi};
-use embassy_time::Delay;
-use lora_phy::mod_params::*;
-use lora_phy::sx1276_7_8_9::SX1276_7_8_9;
-use lora_phy::LoRa;
-use lorawan::default_crypto::DefaultFactory as Crypto;
-use lorawan_device::async_device::lora_radio::LoRaRadio;
-use lorawan_device::async_device::{region, Device, JoinMode};
-use lorawan_device::{AppEui, AppKey, DevEui};
-use {defmt_rtt as _, panic_probe as _};
-
-bind_interrupts!(struct Irqs {
-    RNG_LPUART1 => rng::InterruptHandler<peripherals::RNG>;
-});
-
-const LORAWAN_REGION: region::Region = region::Region::EU868; // warning: set this appropriately for the region
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let mut config = embassy_stm32::Config::default();
-    config.rcc.hsi = true;
-    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSI;
-    let p = embassy_stm32::init(config);
-
-    let mut spi_config = spi::Config::default();
-    spi_config.frequency = khz(200);
-
-    // SPI for sx1276
-    let spi = spi::Spi::new(p.SPI1, p.PB3, p.PA7, p.PA6, p.DMA1_CH3, p.DMA1_CH2, spi_config);
-
-    let nss = Output::new(p.PA15.degrade(), Level::High, Speed::Low);
-    let reset = Output::new(p.PC0.degrade(), Level::High, Speed::Low);
-
-    let irq_pin = Input::new(p.PB4.degrade(), Pull::Up);
-    let irq = ExtiInput::new(irq_pin, p.EXTI4.degrade());
-
-    let iv = Stm32l0InterfaceVariant::new(nss, reset, irq, None, None).unwrap();
-
-    let lora = {
-        match LoRa::new(SX1276_7_8_9::new(BoardType::Stm32l0Sx1276, spi, iv), true, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let radio = LoRaRadio::new(lora);
-    let region: region::Configuration = region::Configuration::new(LORAWAN_REGION);
-    let mut device: Device<_, Crypto, _, _> = Device::new(region, radio, LoraTimer::new(), Rng::new(p.RNG, Irqs));
-
-    defmt::info!("Joining LoRaWAN network");
-
-    // TODO: Adjust the EUI and Keys according to your network credentials
-    match device
-        .join(&JoinMode::OTAA {
-            deveui: DevEui::from([0, 0, 0, 0, 0, 0, 0, 0]),
-            appeui: AppEui::from([0, 0, 0, 0, 0, 0, 0, 0]),
-            appkey: AppKey::from([0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]),
-        })
-        .await
-    {
-        Ok(()) => defmt::info!("LoRaWAN network joined"),
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-}

examples/stm32l0/src/bin/lora_p2p_receive.rs

@@ -1,119 +0,0 @@
-//! This example runs on the STM32 LoRa Discovery board, which has a builtin Semtech Sx1276 radio.
-//! It demonstrates LORA P2P receive functionality in conjunction with the lora_p2p_send example.
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait)]
-
-use defmt::*;
-use embassy_executor::Spawner;
-use embassy_lora::iv::Stm32l0InterfaceVariant;
-use embassy_stm32::exti::{Channel, ExtiInput};
-use embassy_stm32::gpio::{Input, Level, Output, Pin, Pull, Speed};
-use embassy_stm32::spi;
-use embassy_stm32::time::khz;
-use embassy_time::{Delay, Timer};
-use lora_phy::mod_params::*;
-use lora_phy::sx1276_7_8_9::SX1276_7_8_9;
-use lora_phy::LoRa;
-use {defmt_rtt as _, panic_probe as _};
-
-const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let mut config = embassy_stm32::Config::default();
-    config.rcc.hsi = true;
-    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSI;
-    let p = embassy_stm32::init(config);
-
-    let mut spi_config = spi::Config::default();
-    spi_config.frequency = khz(200);
-
-    // SPI for sx1276
-    let spi = spi::Spi::new(p.SPI1, p.PB3, p.PA7, p.PA6, p.DMA1_CH3, p.DMA1_CH2, spi_config);
-
-    let nss = Output::new(p.PA15.degrade(), Level::High, Speed::Low);
-    let reset = Output::new(p.PC0.degrade(), Level::High, Speed::Low);
-
-    let irq_pin = Input::new(p.PB4.degrade(), Pull::Up);
-    let irq = ExtiInput::new(irq_pin, p.EXTI4.degrade());
-
-    let iv = Stm32l0InterfaceVariant::new(nss, reset, irq, None, None).unwrap();
-
-    let mut lora = {
-        match LoRa::new(SX1276_7_8_9::new(BoardType::Stm32l0Sx1276, spi, iv), false, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mut debug_indicator = Output::new(p.PB5, Level::Low, Speed::Low);
-    let mut start_indicator = Output::new(p.PB6, Level::Low, Speed::Low);
-
-    start_indicator.set_high();
-    Timer::after_secs(5).await;
-    start_indicator.set_low();
-
-    let mut receiving_buffer = [00u8; 100];
-
-    let mdltn_params = {
-        match lora.create_modulation_params(
-            SpreadingFactor::_10,
-            Bandwidth::_250KHz,
-            CodingRate::_4_8,
-            LORA_FREQUENCY_IN_HZ,
-        ) {
-            Ok(mp) => mp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let rx_pkt_params = {
-        match lora.create_rx_packet_params(4, false, receiving_buffer.len() as u8, true, false, &mdltn_params) {
-            Ok(pp) => pp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    match lora
-        .prepare_for_rx(&mdltn_params, &rx_pkt_params, None, None, false)
-        .await
-    {
-        Ok(()) => {}
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    loop {
-        receiving_buffer = [00u8; 100];
-        match lora.rx(&rx_pkt_params, &mut receiving_buffer).await {
-            Ok((received_len, _rx_pkt_status)) => {
-                if (received_len == 3)
-                    && (receiving_buffer[0] == 0x01u8)
-                    && (receiving_buffer[1] == 0x02u8)
-                    && (receiving_buffer[2] == 0x03u8)
-                {
-                    info!("rx successful");
-                    debug_indicator.set_high();
-                    Timer::after_secs(5).await;
-                    debug_indicator.set_low();
-                } else {
-                    info!("rx unknown packet");
-                }
-            }
-            Err(err) => info!("rx unsuccessful = {}", err),
-        }
-    }
-}

examples/stm32l0/src/bin/lora_p2p_send.rs

@@ -1,102 +0,0 @@
-//! This example runs on the STM32 LoRa Discovery board, which has a builtin Semtech Sx1276 radio.
-//! It demonstrates LORA P2P send functionality.
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait)]
-
-use defmt::*;
-use embassy_executor::Spawner;
-use embassy_lora::iv::Stm32l0InterfaceVariant;
-use embassy_stm32::exti::{Channel, ExtiInput};
-use embassy_stm32::gpio::{Input, Level, Output, Pin, Pull, Speed};
-use embassy_stm32::spi;
-use embassy_stm32::time::khz;
-use embassy_time::Delay;
-use lora_phy::mod_params::*;
-use lora_phy::sx1276_7_8_9::SX1276_7_8_9;
-use lora_phy::LoRa;
-use {defmt_rtt as _, panic_probe as _};
-
-const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let mut config = embassy_stm32::Config::default();
-    config.rcc.hsi = true;
-    config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSI;
-    let p = embassy_stm32::init(config);
-
-    let mut spi_config = spi::Config::default();
-    spi_config.frequency = khz(200);
-
-    // SPI for sx1276
-    let spi = spi::Spi::new(p.SPI1, p.PB3, p.PA7, p.PA6, p.DMA1_CH3, p.DMA1_CH2, spi_config);
-
-    let nss = Output::new(p.PA15.degrade(), Level::High, Speed::Low);
-    let reset = Output::new(p.PC0.degrade(), Level::High, Speed::Low);
-
-    let irq_pin = Input::new(p.PB4.degrade(), Pull::Up);
-    let irq = ExtiInput::new(irq_pin, p.EXTI4.degrade());
-
-    let iv = Stm32l0InterfaceVariant::new(nss, reset, irq, None, None).unwrap();
-
-    let mut lora = {
-        match LoRa::new(SX1276_7_8_9::new(BoardType::Stm32l0Sx1276, spi, iv), false, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mdltn_params = {
-        match lora.create_modulation_params(
-            SpreadingFactor::_10,
-            Bandwidth::_250KHz,
-            CodingRate::_4_8,
-            LORA_FREQUENCY_IN_HZ,
-        ) {
-            Ok(mp) => mp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mut tx_pkt_params = {
-        match lora.create_tx_packet_params(4, false, true, false, &mdltn_params) {
-            Ok(pp) => pp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    match lora.prepare_for_tx(&mdltn_params, 17, true).await {
-        Ok(()) => {}
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    let buffer = [0x01u8, 0x02u8, 0x03u8];
-    match lora.tx(&mdltn_params, &mut tx_pkt_params, &buffer, 0xffffff).await {
-        Ok(()) => {
-            info!("TX DONE");
-        }
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    match lora.sleep(false).await {
-        Ok(()) => info!("Sleep successful"),
-        Err(err) => info!("Sleep unsuccessful = {}", err),
-    }
-}

examples/stm32l4/Cargo.toml

@@ -15,7 +15,7 @@ embassy-usb = { version = "0.1.0", path = "../../embassy-usb", features = ["defm
 embassy-net-adin1110 = { version = "0.2.0", path = "../../embassy-net-adin1110" }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "nightly", "udp", "tcp", "dhcpv4", "medium-ethernet"] }
 embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }
-embedded-io-async = { version = "0.6.0", features = ["defmt-03"] }
+embedded-io-async = { version = "0.6.1", features = ["defmt-03"] }
 embedded-io = { version = "0.6.0", features = ["defmt-03"] }
 
 defmt = "0.3"
@@ -24,9 +24,9 @@ defmt-rtt = "0.4"
 cortex-m = { version = "0.7.6", features = ["critical-section-single-core"] }
 cortex-m-rt = "0.7.0"
 embedded-hal = "0.2.6"
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.1" }
-embedded-hal-async = { version = "=1.0.0-rc.1" }
-embedded-hal-bus = { version = "=0.1.0-rc.1", features = ["async"] }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
+embedded-hal-async = { version = "=1.0.0-rc.2" }
+embedded-hal-bus = { version = "=0.1.0-rc.2", features = ["async"] }
 panic-probe = { version = "0.3", features = ["print-defmt"] }
 futures = { version = "0.3.17", default-features = false, features = ["async-await"] }
 heapless = { version = "0.8", default-features = false }

examples/stm32l4/src/bin/dac.rs

@@ -3,7 +3,7 @@
 #![feature(type_alias_impl_trait)]
 
 use defmt::*;
-use embassy_stm32::dac::{DacCh1, DacChannel, Value};
+use embassy_stm32::dac::{DacCh1, Value};
 use embassy_stm32::dma::NoDma;
 use {defmt_rtt as _, panic_probe as _};
 
@@ -13,11 +13,10 @@ fn main() -> ! {
     info!("Hello World!");
 
     let mut dac = DacCh1::new(p.DAC1, NoDma, p.PA4);
-    unwrap!(dac.set_trigger_enable(false));
 
     loop {
         for v in 0..=255 {
-            unwrap!(dac.set(Value::Bit8(to_sine_wave(v))));
+            dac.set(Value::Bit8(to_sine_wave(v)));
         }
     }
 }

examples/stm32l4/src/bin/dac_dma.rs

@@ -4,21 +4,15 @@
 
 use defmt::*;
 use embassy_executor::Spawner;
-use embassy_stm32::dac::{DacChannel, ValueArray};
+use embassy_stm32::dac::{DacCh1, DacCh2, ValueArray};
 use embassy_stm32::pac::timer::vals::{Mms, Opm};
-use embassy_stm32::peripherals::{TIM6, TIM7};
+use embassy_stm32::peripherals::{DAC1, DMA1_CH3, DMA1_CH4, TIM6, TIM7};
 use embassy_stm32::rcc::low_level::RccPeripheral;
 use embassy_stm32::time::Hertz;
 use embassy_stm32::timer::low_level::Basic16bitInstance;
 use micromath::F32Ext;
 use {defmt_rtt as _, panic_probe as _};
 
-pub type Dac1Type =
-    embassy_stm32::dac::DacCh1<'static, embassy_stm32::peripherals::DAC1, embassy_stm32::peripherals::DMA1_CH3>;
-
-pub type Dac2Type =
-    embassy_stm32::dac::DacCh2<'static, embassy_stm32::peripherals::DAC1, embassy_stm32::peripherals::DMA1_CH4>;
-
 #[embassy_executor::main]
 async fn main(spawner: Spawner) {
     let config = embassy_stm32::Config::default();
@@ -34,7 +28,7 @@ async fn main(spawner: Spawner) {
 }
 
 #[embassy_executor::task]
-async fn dac_task1(mut dac: Dac1Type) {
+async fn dac_task1(mut dac: DacCh1<'static, DAC1, DMA1_CH3>) {
     let data: &[u8; 256] = &calculate_array::<256>();
 
     info!("TIM6 frequency is {}", TIM6::frequency());
@@ -48,8 +42,9 @@ async fn dac_task1(mut dac: Dac1Type) {
         error!("Reload value {} below threshold!", reload);
     }
 
-    dac.select_trigger(embassy_stm32::dac::Ch1Trigger::Tim6).unwrap();
-    dac.enable_channel().unwrap();
+    dac.set_trigger(embassy_stm32::dac::TriggerSel::Tim6);
+    dac.set_triggering(true);
+    dac.enable();
 
     TIM6::enable_and_reset();
     TIM6::regs().arr().modify(|w| w.set_arr(reload as u16 - 1));
@@ -71,14 +66,12 @@ async fn dac_task1(mut dac: Dac1Type) {
     // Loop technically not necessary if DMA circular mode is enabled
     loop {
         info!("Loop DAC1");
-        if let Err(e) = dac.write(ValueArray::Bit8(data), true).await {
-            error!("Could not write to dac: {}", e);
-        }
+        dac.write(ValueArray::Bit8(data), true).await;
     }
 }
 
 #[embassy_executor::task]
-async fn dac_task2(mut dac: Dac2Type) {
+async fn dac_task2(mut dac: DacCh2<'static, DAC1, DMA1_CH4>) {
     let data: &[u8; 256] = &calculate_array::<256>();
 
     info!("TIM7 frequency is {}", TIM7::frequency());
@@ -98,7 +91,9 @@ async fn dac_task2(mut dac: Dac2Type) {
         w.set_cen(true);
     });
 
-    dac.select_trigger(embassy_stm32::dac::Ch2Trigger::Tim7).unwrap();
+    dac.set_trigger(embassy_stm32::dac::TriggerSel::Tim7);
+    dac.set_triggering(true);
+    dac.enable();
 
     debug!(
         "TIM7 Frequency {}, Target Frequency {}, Reload {}, Reload as u16 {}, Samples {}",
@@ -109,9 +104,7 @@ async fn dac_task2(mut dac: Dac2Type) {
         data.len()
     );
 
-    if let Err(e) = dac.write(ValueArray::Bit8(data), true).await {
-        error!("Could not write to dac: {}", e);
-    }
+    dac.write(ValueArray::Bit8(data), true).await;
 }
 
 fn to_sine_wave(v: u8) -> u8 {

examples/stm32l4/src/bin/i2c.rs

@@ -14,7 +14,8 @@ const ADDRESS: u8 = 0x5F;
 const WHOAMI: u8 = 0x0F;
 
 bind_interrupts!(struct Irqs {
-    I2C2_EV => i2c::InterruptHandler<peripherals::I2C2>;
+    I2C2_EV => i2c::EventInterruptHandler<peripherals::I2C2>;
+    I2C2_ER => i2c::ErrorInterruptHandler<peripherals::I2C2>;
 });
 
 #[embassy_executor::main]

examples/stm32l4/src/bin/i2c_blocking_async.rs

@@ -16,7 +16,8 @@ const ADDRESS: u8 = 0x5F;
 const WHOAMI: u8 = 0x0F;
 
 bind_interrupts!(struct Irqs {
-    I2C2_EV => i2c::InterruptHandler<peripherals::I2C2>;
+    I2C2_EV => i2c::EventInterruptHandler<peripherals::I2C2>;
+    I2C2_ER => i2c::ErrorInterruptHandler<peripherals::I2C2>;
 });
 
 #[embassy_executor::main]

examples/stm32l4/src/bin/i2c_dma.rs

@@ -13,7 +13,8 @@ const ADDRESS: u8 = 0x5F;
 const WHOAMI: u8 = 0x0F;
 
 bind_interrupts!(struct Irqs {
-    I2C2_EV => i2c::InterruptHandler<peripherals::I2C2>;
+    I2C2_EV => i2c::EventInterruptHandler<peripherals::I2C2>;
+    I2C2_ER => i2c::ErrorInterruptHandler<peripherals::I2C2>;
 });
 
 #[embassy_executor::main]

examples/stm32l4/src/bin/spe_adin1110_http_server.rs

@@ -40,7 +40,8 @@ use static_cell::make_static;
 use {embassy_stm32 as hal, panic_probe as _};
 
 bind_interrupts!(struct Irqs {
-    I2C3_EV => i2c::InterruptHandler<peripherals::I2C3>;
+    I2C3_EV => i2c::EventInterruptHandler<peripherals::I2C3>;
+    I2C3_ER => i2c::ErrorInterruptHandler<peripherals::I2C3>;
     RNG => rng::InterruptHandler<peripherals::RNG>;
 });
 

examples/stm32l5/Cargo.toml

@@ -25,7 +25,7 @@ embedded-hal = "0.2.6"
 futures = { version = "0.3.17", default-features = false, features = ["async-await"] }
 heapless = { version = "0.8", default-features = false }
 rand_core = { version = "0.6.3", default-features = false }
-embedded-io-async = { version = "0.6.0" }
+embedded-io-async = { version = "0.6.1" }
 static_cell = { version = "2", features = ["nightly"]}
 
 [profile.release]

examples/stm32wl/Cargo.toml

@@ -11,10 +11,6 @@ embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["de
 embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["nightly", "unstable-traits", "defmt", "defmt-timestamp-uptime", "tick-hz-32_768"] }
 embassy-embedded-hal = { version = "0.1.0", path = "../../embassy-embedded-hal" }
-embassy-lora = { version = "0.1.0", path = "../../embassy-lora", features = ["stm32wl", "time", "defmt"] }
-lora-phy = { version = "2" }
-lorawan-device = { version = "0.11.0", default-features = false, features = ["async", "external-lora-phy"] }
-lorawan = { version = "0.7.4", default-features = false, features = ["default-crypto"] }
 
 defmt = "0.3"
 defmt-rtt = "0.4"

examples/stm32wl/src/bin/lora_lorawan.rs

@@ -1,95 +0,0 @@
-//! This example runs on a STM32WL board, which has a builtin Semtech Sx1262 radio.
-//! It demonstrates LoRaWAN join functionality.
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait, async_fn_in_trait)]
-#![allow(stable_features, unknown_lints, async_fn_in_trait)]
-
-use defmt::info;
-use embassy_executor::Spawner;
-use embassy_lora::iv::{InterruptHandler, Stm32wlInterfaceVariant};
-use embassy_lora::LoraTimer;
-use embassy_stm32::gpio::{Level, Output, Pin, Speed};
-use embassy_stm32::rng::{self, Rng};
-use embassy_stm32::spi::Spi;
-use embassy_stm32::time::Hertz;
-use embassy_stm32::{bind_interrupts, peripherals};
-use embassy_time::Delay;
-use lora_phy::mod_params::*;
-use lora_phy::sx1261_2::SX1261_2;
-use lora_phy::LoRa;
-use lorawan::default_crypto::DefaultFactory as Crypto;
-use lorawan_device::async_device::lora_radio::LoRaRadio;
-use lorawan_device::async_device::{region, Device, JoinMode};
-use lorawan_device::{AppEui, AppKey, DevEui};
-use {defmt_rtt as _, panic_probe as _};
-
-const LORAWAN_REGION: region::Region = region::Region::EU868; // warning: set this appropriately for the region
-
-bind_interrupts!(struct Irqs{
-    SUBGHZ_RADIO => InterruptHandler;
-    RNG => rng::InterruptHandler<peripherals::RNG>;
-});
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let mut config = embassy_stm32::Config::default();
-    {
-        use embassy_stm32::rcc::*;
-        config.rcc.hse = Some(Hse {
-            freq: Hertz(32_000_000),
-            mode: HseMode::Bypass,
-            prescaler: HsePrescaler::DIV1,
-        });
-        config.rcc.mux = ClockSrc::PLL1_R;
-        config.rcc.pll = Some(Pll {
-            source: PllSource::HSE,
-            prediv: PllPreDiv::DIV2,
-            mul: PllMul::MUL6,
-            divp: None,
-            divq: Some(PllQDiv::DIV2), // PLL1_Q clock (32 / 2 * 6 / 2), used for RNG
-            divr: Some(PllRDiv::DIV2), // sysclk 48Mhz clock (32 / 2 * 6 / 2)
-        });
-    }
-    let p = embassy_stm32::init(config);
-
-    let spi = Spi::new_subghz(p.SUBGHZSPI, p.DMA1_CH1, p.DMA1_CH2);
-
-    // Set CTRL1 and CTRL3 for high-power transmission, while CTRL2 acts as an RF switch between tx and rx
-    let _ctrl1 = Output::new(p.PC4.degrade(), Level::Low, Speed::High);
-    let ctrl2 = Output::new(p.PC5.degrade(), Level::High, Speed::High);
-    let _ctrl3 = Output::new(p.PC3.degrade(), Level::High, Speed::High);
-    let iv = Stm32wlInterfaceVariant::new(Irqs, None, Some(ctrl2)).unwrap();
-
-    let lora = {
-        match LoRa::new(SX1261_2::new(BoardType::Stm32wlSx1262, spi, iv), true, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-    let radio = LoRaRadio::new(lora);
-    let region: region::Configuration = region::Configuration::new(LORAWAN_REGION);
-    let mut device: Device<_, Crypto, _, _> = Device::new(region, radio, LoraTimer::new(), Rng::new(p.RNG, Irqs));
-
-    defmt::info!("Joining LoRaWAN network");
-
-    // TODO: Adjust the EUI and Keys according to your network credentials
-    match device
-        .join(&JoinMode::OTAA {
-            deveui: DevEui::from([0, 0, 0, 0, 0, 0, 0, 0]),
-            appeui: AppEui::from([0, 0, 0, 0, 0, 0, 0, 0]),
-            appkey: AppKey::from([0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]),
-        })
-        .await
-    {
-        Ok(()) => defmt::info!("LoRaWAN network joined"),
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-}

examples/stm32wl/src/bin/lora_p2p_receive.rs

@@ -1,133 +0,0 @@
-//! This example runs on the STM32WL board, which has a builtin Semtech Sx1262 radio.
-//! It demonstrates LORA P2P receive functionality in conjunction with the lora_p2p_send example.
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait, async_fn_in_trait)]
-#![allow(stable_features, unknown_lints, async_fn_in_trait)]
-
-use defmt::info;
-use embassy_executor::Spawner;
-use embassy_lora::iv::{InterruptHandler, Stm32wlInterfaceVariant};
-use embassy_stm32::bind_interrupts;
-use embassy_stm32::gpio::{Level, Output, Pin, Speed};
-use embassy_stm32::spi::Spi;
-use embassy_stm32::time::Hertz;
-use embassy_time::{Delay, Timer};
-use lora_phy::mod_params::*;
-use lora_phy::sx1261_2::SX1261_2;
-use lora_phy::LoRa;
-use {defmt_rtt as _, panic_probe as _};
-
-const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
-
-bind_interrupts!(struct Irqs{
-    SUBGHZ_RADIO => InterruptHandler;
-});
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let mut config = embassy_stm32::Config::default();
-    {
-        use embassy_stm32::rcc::*;
-        config.rcc.hse = Some(Hse {
-            freq: Hertz(32_000_000),
-            mode: HseMode::Bypass,
-            prescaler: HsePrescaler::DIV1,
-        });
-        config.rcc.mux = ClockSrc::PLL1_R;
-        config.rcc.pll = Some(Pll {
-            source: PllSource::HSE,
-            prediv: PllPreDiv::DIV2,
-            mul: PllMul::MUL6,
-            divp: None,
-            divq: Some(PllQDiv::DIV2), // PLL1_Q clock (32 / 2 * 6 / 2), used for RNG
-            divr: Some(PllRDiv::DIV2), // sysclk 48Mhz clock (32 / 2 * 6 / 2)
-        });
-    }
-    let p = embassy_stm32::init(config);
-
-    let spi = Spi::new_subghz(p.SUBGHZSPI, p.DMA1_CH1, p.DMA1_CH2);
-
-    // Set CTRL1 and CTRL3 for high-power transmission, while CTRL2 acts as an RF switch between tx and rx
-    let _ctrl1 = Output::new(p.PC4.degrade(), Level::Low, Speed::High);
-    let ctrl2 = Output::new(p.PC5.degrade(), Level::High, Speed::High);
-    let _ctrl3 = Output::new(p.PC3.degrade(), Level::High, Speed::High);
-    let iv = Stm32wlInterfaceVariant::new(Irqs, None, Some(ctrl2)).unwrap();
-
-    let mut lora = {
-        match LoRa::new(SX1261_2::new(BoardType::Stm32wlSx1262, spi, iv), false, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mut debug_indicator = Output::new(p.PB9, Level::Low, Speed::Low);
-    let mut start_indicator = Output::new(p.PB15, Level::Low, Speed::Low);
-
-    start_indicator.set_high();
-    Timer::after_secs(5).await;
-    start_indicator.set_low();
-
-    let mut receiving_buffer = [00u8; 100];
-
-    let mdltn_params = {
-        match lora.create_modulation_params(
-            SpreadingFactor::_10,
-            Bandwidth::_250KHz,
-            CodingRate::_4_8,
-            LORA_FREQUENCY_IN_HZ,
-        ) {
-            Ok(mp) => mp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let rx_pkt_params = {
-        match lora.create_rx_packet_params(4, false, receiving_buffer.len() as u8, true, false, &mdltn_params) {
-            Ok(pp) => pp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    match lora
-        .prepare_for_rx(&mdltn_params, &rx_pkt_params, None, None, false)
-        .await
-    {
-        Ok(()) => {}
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    loop {
-        receiving_buffer = [00u8; 100];
-        match lora.rx(&rx_pkt_params, &mut receiving_buffer).await {
-            Ok((received_len, _rx_pkt_status)) => {
-                if (received_len == 3)
-                    && (receiving_buffer[0] == 0x01u8)
-                    && (receiving_buffer[1] == 0x02u8)
-                    && (receiving_buffer[2] == 0x03u8)
-                {
-                    info!("rx successful");
-                    debug_indicator.set_high();
-                    Timer::after_secs(5).await;
-                    debug_indicator.set_low();
-                } else {
-                    info!("rx unknown packet");
-                }
-            }
-            Err(err) => info!("rx unsuccessful = {}", err),
-        }
-    }
-}

examples/stm32wl/src/bin/lora_p2p_send.rs

@@ -1,116 +0,0 @@
-//! This example runs on a STM32WL board, which has a builtin Semtech Sx1262 radio.
-//! It demonstrates LORA P2P send functionality.
-#![no_std]
-#![no_main]
-#![macro_use]
-#![feature(type_alias_impl_trait, async_fn_in_trait)]
-#![allow(stable_features, unknown_lints, async_fn_in_trait)]
-
-use defmt::info;
-use embassy_executor::Spawner;
-use embassy_lora::iv::{InterruptHandler, Stm32wlInterfaceVariant};
-use embassy_stm32::bind_interrupts;
-use embassy_stm32::gpio::{Level, Output, Pin, Speed};
-use embassy_stm32::spi::Spi;
-use embassy_stm32::time::Hertz;
-use embassy_time::Delay;
-use lora_phy::mod_params::*;
-use lora_phy::sx1261_2::SX1261_2;
-use lora_phy::LoRa;
-use {defmt_rtt as _, panic_probe as _};
-
-const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
-
-bind_interrupts!(struct Irqs{
-    SUBGHZ_RADIO => InterruptHandler;
-});
-
-#[embassy_executor::main]
-async fn main(_spawner: Spawner) {
-    let mut config = embassy_stm32::Config::default();
-    {
-        use embassy_stm32::rcc::*;
-        config.rcc.hse = Some(Hse {
-            freq: Hertz(32_000_000),
-            mode: HseMode::Bypass,
-            prescaler: HsePrescaler::DIV1,
-        });
-        config.rcc.mux = ClockSrc::PLL1_R;
-        config.rcc.pll = Some(Pll {
-            source: PllSource::HSE,
-            prediv: PllPreDiv::DIV2,
-            mul: PllMul::MUL6,
-            divp: None,
-            divq: Some(PllQDiv::DIV2), // PLL1_Q clock (32 / 2 * 6 / 2), used for RNG
-            divr: Some(PllRDiv::DIV2), // sysclk 48Mhz clock (32 / 2 * 6 / 2)
-        });
-    }
-    let p = embassy_stm32::init(config);
-
-    let spi = Spi::new_subghz(p.SUBGHZSPI, p.DMA1_CH1, p.DMA1_CH2);
-
-    // Set CTRL1 and CTRL3 for high-power transmission, while CTRL2 acts as an RF switch between tx and rx
-    let _ctrl1 = Output::new(p.PC4.degrade(), Level::Low, Speed::High);
-    let ctrl2 = Output::new(p.PC5.degrade(), Level::High, Speed::High);
-    let _ctrl3 = Output::new(p.PC3.degrade(), Level::High, Speed::High);
-    let iv = Stm32wlInterfaceVariant::new(Irqs, None, Some(ctrl2)).unwrap();
-
-    let mut lora = {
-        match LoRa::new(SX1261_2::new(BoardType::Stm32wlSx1262, spi, iv), false, Delay).await {
-            Ok(l) => l,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mdltn_params = {
-        match lora.create_modulation_params(
-            SpreadingFactor::_10,
-            Bandwidth::_250KHz,
-            CodingRate::_4_8,
-            LORA_FREQUENCY_IN_HZ,
-        ) {
-            Ok(mp) => mp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    let mut tx_pkt_params = {
-        match lora.create_tx_packet_params(4, false, true, false, &mdltn_params) {
-            Ok(pp) => pp,
-            Err(err) => {
-                info!("Radio error = {}", err);
-                return;
-            }
-        }
-    };
-
-    match lora.prepare_for_tx(&mdltn_params, 20, false).await {
-        Ok(()) => {}
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    let buffer = [0x01u8, 0x02u8, 0x03u8];
-    match lora.tx(&mdltn_params, &mut tx_pkt_params, &buffer, 0xffffff).await {
-        Ok(()) => {
-            info!("TX DONE");
-        }
-        Err(err) => {
-            info!("Radio error = {}", err);
-            return;
-        }
-    };
-
-    match lora.sleep(false).await {
-        Ok(()) => info!("Sleep successful"),
-        Err(err) => info!("Sleep unsuccessful = {}", err),
-    }
-}

tests/nrf/Cargo.toml

@@ -9,15 +9,15 @@ teleprobe-meta = "1"
 
 embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt", "nightly"] }
-embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "defmt", "nightly", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["arch-cortex-m", "executor-thread", "defmt", "task-arena-size-16384", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "nightly", "unstable-traits", "defmt-timestamp-uptime"] }
 embassy-nrf = { version = "0.1.0", path = "../../embassy-nrf", features = ["defmt", "nightly", "unstable-traits", "nrf52840", "time-driver-rtc1", "gpiote", "unstable-pac"] }
-embedded-io-async = { version = "0.6.0", features = ["defmt-03"] }
+embedded-io-async = { version = "0.6.1", features = ["defmt-03"] }
 embassy-net = { version = "0.2.0", path = "../../embassy-net", features = ["defmt", "tcp", "dhcpv4", "medium-ethernet", "nightly"] }
 embassy-net-esp-hosted = { version = "0.1.0", path = "../../embassy-net-esp-hosted", features = ["defmt"] }
 embassy-net-enc28j60 = { version = "0.1.0", path = "../../embassy-net-enc28j60", features = ["defmt"] }
-embedded-hal-async = { version = "1.0.0-rc.1" }
-embedded-hal-bus = { version = "0.1.0-rc.1", features = ["async"] }
+embedded-hal-async = { version = "1.0.0-rc.2" }
+embedded-hal-bus = { version = "0.1.0-rc.2", features = ["async"] }
 static_cell = { version = "2", features = [ "nightly" ] }
 perf-client = { path = "../perf-client" }
 

tests/nrf/src/bin/buffered_uart.rs

@@ -1,6 +1,5 @@
 #![no_std]
 #![no_main]
-#![feature(type_alias_impl_trait)]
 teleprobe_meta::target!(b"nrf52840-dk");
 
 use defmt::{assert_eq, *};

tests/nrf/src/bin/buffered_uart_full.rs

@@ -1,6 +1,5 @@
 #![no_std]
 #![no_main]
-#![feature(type_alias_impl_trait)]
 teleprobe_meta::target!(b"nrf52840-dk");
 
 use defmt::{assert_eq, *};

tests/nrf/src/bin/buffered_uart_spam.rs

@@ -1,6 +1,5 @@
 #![no_std]
 #![no_main]
-#![feature(type_alias_impl_trait)]
 teleprobe_meta::target!(b"nrf52840-dk");
 
 use core::mem;

tests/nrf/src/bin/timer.rs

@@ -1,6 +1,5 @@
 #![no_std]
 #![no_main]
-#![feature(type_alias_impl_trait)]
 teleprobe_meta::target!(b"nrf52840-dk");
 
 use defmt::{assert, info};

tests/riscv32/Cargo.toml

@@ -7,7 +7,7 @@ license = "MIT OR Apache-2.0"
 [dependencies]
 critical-section = { version = "1.1.1", features = ["restore-state-bool"] }
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync" }
-embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["arch-riscv32", "nightly", "executor-thread"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["arch-riscv32", "executor-thread"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time" }
 embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }
 

tests/riscv32/src/bin/empty.rs

@@ -1,6 +1,5 @@
 #![no_std]
 #![no_main]
-#![feature(type_alias_impl_trait)]
 
 use embassy_executor::Spawner;
 

tests/rp/Cargo.toml

@@ -8,7 +8,7 @@ license = "MIT OR Apache-2.0"
 teleprobe-meta = "1.1"
 
 embassy-sync = { version = "0.4.0", path = "../../embassy-sync", features = ["defmt"] }
-embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["nightly", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
+embassy-executor = { version = "0.3.3", path = "../../embassy-executor", features = ["task-arena-size-32768", "arch-cortex-m", "executor-thread", "defmt", "integrated-timers"] }
 embassy-time = { version = "0.1.5", path = "../../embassy-time", features = ["defmt", "nightly", "unstable-traits"] }
 embassy-rp = { version = "0.1.0", path = "../../embassy-rp", features = ["nightly", "defmt", "unstable-pac", "unstable-traits", "time-driver", "critical-section-impl", "intrinsics", "rom-v2-intrinsics", "run-from-ram"]  }
 embassy-futures = { version = "0.1.0", path = "../../embassy-futures" }
@@ -24,12 +24,12 @@ defmt-rtt = "0.4"
 cortex-m = { version = "0.7.6" }
 cortex-m-rt = "0.7.0"
 embedded-hal = "0.2.6"
-embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.1" }
-embedded-hal-async = { version = "=1.0.0-rc.1" }
-embedded-hal-bus = { version = "=0.1.0-rc.1", features = ["async"] }
+embedded-hal-1 = { package = "embedded-hal", version = "=1.0.0-rc.2" }
+embedded-hal-async = { version = "=1.0.0-rc.2" }
+embedded-hal-bus = { version = "=0.1.0-rc.2", features = ["async"] }
 panic-probe = { version = "0.3.0", features = ["print-defmt"] }
 futures = { version = "0.3.17", default-features = false, features = ["async-await"] }
-embedded-io-async = { version = "0.6.0" }
+embedded-io-async = { version = "0.6.1" }
 embedded-storage = { version = "0.3" }
 static_cell = { version = "2", features = ["nightly"]}
 portable-atomic = { version = "1.5", features = ["critical-section"] }

tests/rp/src/bin/adc.rs

@@ -1,6 +1,5 @@
 #![no_std]
 #![no_main]
-#![feature(type_alias_impl_trait)]
 teleprobe_meta::target!(b"rpi-pico");
 
 use defmt::*;

tests/rp/src/bin/bootsel.rs

@@ -1,6 +1,5 @@
 #![no_std]
 #![no_main]
-#![feature(type_alias_impl_trait)]
 teleprobe_meta::target!(b"rpi-pico");
 
 use defmt::{assert_eq, *};

tests/rp/src/bin/dma_copy_async.rs

@@ -1,6 +1,5 @@
 #![no_std]
 #![no_main]
-#![feature(type_alias_impl_trait)]
 teleprobe_meta::target!(b"rpi-pico");
 
 use defmt::{assert_eq, *};

tests/rp/src/bin/flash.rs

@@ -1,6 +1,5 @@
 #![no_std]
 #![no_main]
-#![feature(type_alias_impl_trait)]
 teleprobe_meta::target!(b"rpi-pico");
 
 use defmt::*;

tests/rp/src/bin/float.rs

@@ -1,6 +1,5 @@
 #![no_std]
 #![no_main]
-#![feature(type_alias_impl_trait)]
 teleprobe_meta::target!(b"rpi-pico");
 
 use defmt::*;

tests/rp/src/bin/gpio.rs

@@ -1,6 +1,5 @@
 #![no_std]
 #![no_main]
-#![feature(type_alias_impl_trait)]
 teleprobe_meta::target!(b"rpi-pico");
 
 use defmt::{assert, *};