Commit Graph

239 Commits

Author SHA1 Message Date
Dario Nieuwenhuis
77ceced036 Working CDC-ACM host->device 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
37598a5b37 wip: experimental async usb stack 2022-04-06 05:38:11 +02:00
Dario Nieuwenhuis
6731948056 Add async Mutex. 2022-04-06 01:39:58 +02:00
Dario Nieuwenhuis
27a1b0ea73 Simpler Channel.
- Allow initializing in a static, without Forever.
- Remove ability to close, since in embedded enviromnents channels usually live forever and don't get closed.
- Remove MPSC restriction, it's MPMC now. Rename "mpsc" to "channel".
- `Sender` and `Receiver` are still available if you want to enforce a piece of code only has send/receive access, but are optional: you can send/receive directly into the Channel if you want.
2022-04-06 01:34:08 +02:00
Dario Nieuwenhuis
82803bffda Use embassy/defmt-timestamp-uptime in all examples. 2022-04-02 04:35:06 +02:00
Dario Nieuwenhuis
9bad9365dc Update rust nightly, embedded-hal 1.0, embedded-hal-async. 2022-03-11 00:38:07 +01:00
huntc
3990f09b29 Simplifies the API by taking in the TIMER and PPI channels 2022-03-07 14:51:17 +11:00
huntc
98bdac51fe Improve nRF Saadc sampling
Starting the sampling task prior to starting the SAADC peripheral can lead to unexpected buffer behaviour with multiple channels. We now provide an init callback at the point where the SAADC has started for the first time. This callback can be used to kick off sampling via PPI.

We also need to trigger the SAADC to start sampling the next buffer when the previous one is ended so that we do not drop samples - the major benefit of double buffering.

As a bonus we provide a calibrate method as it is recommended to use before starting up the sampling.

The example has been updated to illustrate these new features.
2022-03-07 14:51:17 +11:00
bors[bot]
e728a32672
Merge #613
613: Rust stable support r=Dirbaio a=Dirbaio

This PR adds (limited) stable Rust support!

The drawbacks are: 

- No `#[embassy::task]`, `#[embassy::main]`. (requires `type_alias_impl_trait`). You have to manually allocate the tasks somewhere they'll live forever. See [example](https://github.com/embassy-rs/embassy/blob/master/examples/nrf/src/bin/raw_spawn.rs)
- No async trait impls (requires GATs). Note that the full API surface of HALs is still available through inherent methods: #552 #581 
- Some stuff is not constructible in const (requires `const_fn_trait_bound`), although there's an (ugly) workaround for the generic `Mutex`.

So it's not that bad in the end, it's fully usable for shipping production-ready firmwares. We'll still recommend nightly as the default, until GATs and `type_alias_impl_trait` are stable.

Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
2022-02-12 00:30:47 +00:00
Dario Nieuwenhuis
20e14b8edb embassy, embassy-nrf: add nightly Cargo feature to gate nightly-only features. 2022-02-12 01:16:31 +01:00
Dario Nieuwenhuis
6c925b2342 blocking_mutex: refactor to work on stable. No GATs, and can be constructed in const. 2022-02-12 01:16:31 +01:00
Dario Nieuwenhuis
6de02bb23e nrf: remove OptionalPin 2022-02-12 01:07:02 +01:00
Ulf Lilleengen
f79624c3e6 Upgrade to embedded-storage 0.3.0 2022-02-07 12:35:58 +01:00
bors[bot]
a1d6077446
Merge #591
591: PWM WS2812B example and flexible sequence config r=Dirbaio a=huntc

I've permitted the PWM sequences to be mutated on stopping the PWM by associating them with a new  `SingleSequencer` structure. This is so that we can perform effects on the LEDs (and other use-cases, I'm sure!). The example has been updated to illustrate the use of this by flashing a WS2812B LED.

There's also a `Sequencer` structure for more sophisticated PWM interactions, along with a `pwm_double_sequence`  example to illustrate.

These changes should make it possible to attain all of the nRF PWM functionality available.

Co-authored-by: huntc <huntchr@gmail.com>
2022-02-05 02:20:13 +00:00
huntc
df5ba727f2 Further API simplification for the single seq scenario 2022-02-05 08:05:23 +11:00
huntc
81d31e43eb Removed unrequired clone 2022-02-04 19:18:10 +11:00
huntc
965a5f2c3f Introduced the SingleSequencer and a more complex Sequencer 2022-02-04 19:11:15 +11:00
huntc
9e36ede363 Small correction to times 2022-02-04 16:48:26 +11:00
huntc
e9e4d058d1 Revert the use of forever 2022-02-04 16:39:14 +11:00
huntc
81f98c32aa Update another example 2022-02-04 16:34:25 +11:00
huntc
fe5501293f Expose PWM 2022-02-04 16:26:23 +11:00
huntc
1af6b23f97 Introduces a Sequences struct 2022-02-04 13:04:55 +11:00
huntc
986295998a Some more doco 2022-01-30 16:26:09 +11:00
huntc
1c67bd4643 Revert "Own the sequence buffer"
This reverts commit 482389a691.
2022-01-30 16:21:23 +11:00
huntc
482389a691 Own the sequence buffer
This approach owns the sequence buffers which, while introducing an extra move, it eliminates the need to guard the lifetime of the sequence buffer. Given ownership, the buffer will be retained until the PWM sequence task is stopped.
2022-01-29 18:01:06 +11:00
huntc
9ac52a768b Now permits sequences to be mutated subsequently 2022-01-28 16:32:58 +11:00
huntc
12ce024574 Make the sequence a little nicer to pass around 2022-01-28 13:38:20 +11:00
huntc
47aeab152f PWM WS2812B example and per sequence config
Demonstrates how to set the colour of a WS2812B to blue using PWM, and the use of multiple sequences along with their own config. This required an API change.
2022-01-28 11:20:04 +11:00
Dario Nieuwenhuis
0719b05d63 traits: migrate Delay to embedded-hal 1.0+async, remove Rng and Flash. 2022-01-27 00:08:02 +01:00
huntc
c9f29534d6 Stop PWM before assigning the new sequence
I had introduced a small bug in my last PR where I assigned the sequence before stopping the PWM. I now stop the PWM before doing that now.

Also, corrected a math comment.
2022-01-25 16:51:24 +11:00
huntc
48afef28a0 Strengthen the borrow
The start method is now safe. Because it has the potential of borrowing the sequence and mutating itself, the sequence must outlive the Pwm struct.
2022-01-24 17:22:35 +11:00
huntc
7598b8a40f Permit many sequences to be passed
Sequences are now passed in via the start method to avoid having to stop the PWM and restart it. Sequences continue to be constrained with the same lifetime of the Pwm object itself. The pwm_sequence example has been extended to illustrate multiple sequences being passed around.
2022-01-23 16:29:52 +11:00
Dario Nieuwenhuis
7997687f3b nrf: impl embedded-hal 1.0 and embedded-hal-async traits. 2022-01-13 23:56:39 +01:00
Dario Nieuwenhuis
6eec3d8acc nrf/rng: expose all functionality as inherent methods. 2022-01-13 23:56:39 +01:00
Dario Nieuwenhuis
df00c83984 nrf/qspi: expose all functionality as inherent methods. 2022-01-13 23:56:39 +01:00
Dario Nieuwenhuis
3e503e7335 nrf/uarte: expose all functionality as inherent methods. 2022-01-13 23:56:39 +01:00
Dario Nieuwenhuis
c432d036c7 nrf/gpiote: expose all functionality as inherent methods. 2022-01-13 23:56:39 +01:00
Dario Nieuwenhuis
ecb4f8fb00 nrf/twim: expose all functionality as inherent methods. 2022-01-13 23:56:39 +01:00
Dario Nieuwenhuis
a287fef687 nrf/spim: expose all functionality as inherent methods. 2022-01-13 23:56:39 +01:00
huntc
d5d8897c84 Remove unsafe from new on RND
Unsafe is not required here given that all futures are required to live longer than their global peripheral instances. There are other occurrences of unsafe being used on new that should be removed. I started to do that but then went down a bit of a rabbit hole.
2022-01-06 09:59:28 +11:00
bors[bot]
f744b74e90
Merge #539
539: nrf: async usb r=Dirbaio a=jacobrosenthal

Frankensteined together from this old pr https://github.com/embassy-rs/embassy/pull/115 and nrf-usdb

~Doesnt currently work..~

Co-authored-by: Jacob Rosenthal <jacobrosenthal@gmail.com>
2022-01-04 07:41:54 +00:00
Dario Nieuwenhuis
22bc1e4ae1 nrf/gpio: add infallible inherent methods, remove some duplication.
This implements Input and Output using FlexPin, to avoid some code duplication.
2021-12-20 00:55:18 +01:00
Jacob Rosenthal
e7d2c52680 example cleanup 2021-12-16 15:20:56 -07:00
Jacob Rosenthal
1d51f91368 usb_uart_io example equivilent to usb_uart 2021-12-16 14:59:35 -07:00
Jacob Rosenthal
1f2bbe3e4a simplify usb_uart example 2021-12-16 14:59:08 -07:00
bors[bot]
5df16c6793
Merge #544
544: Introduces split on the nRF Uarte r=Dirbaio a=huntc

A new `split` method is introduced such that the Uarte tx and rx can be used from separate tasks. An MPSC is used in an example to illustrate how data may be passed between these tasks.

The approach taken within the `Uarte` struct is to split into tx and rx fields on calling `Uarte::new`. These fields are returned given a call to `Uarte::split`, but otherwise, if that call isn't made, then the API remains as it was before.

Here's a snippet from a new example introduced:

```rust
#[embassy::main]
async fn main(spawner: Spawner, p: Peripherals) {
    // ...

    let uart = uarte::Uarte::new(p.UARTE0, irq, p.P0_08, p.P0_06, NoPin, NoPin, config);
    let (mut tx, rx) = uart.split();

    // ...

    // Spawn a task responsible purely for reading

    unwrap!(spawner.spawn(reader(rx, s)));

    // ...

    // Continue reading in this main task and write
    // back out the buffer we receive from the read
    // task.
    loop {
        if let Some(buf) = r.recv().await {
            info!("writing...");
            unwrap!(tx.write(&buf).await);
        }
    }
}

#[embassy::task]
async fn reader(mut rx: UarteRx<'static, UARTE0>, s: Sender<'static, Noop, [u8; 8], 1>) {
    let mut buf = [0; 8];
    loop {
        info!("reading...");
        unwrap!(rx.read(&mut buf).await);
        unwrap!(s.send(buf).await);
    }
}
```


Co-authored-by: huntc <huntchr@gmail.com>
2021-12-16 07:44:40 +00:00
Jacob Rosenthal
5d19f87acb cleanup example 2021-12-15 12:30:48 -07:00
Jacob Rosenthal
61f12324ff enable USB peripheral for relevant chips 2021-12-15 10:23:19 -07:00
Jacob Rosenthal
79502330de rename to UsbBus 2021-12-15 09:59:56 -07:00
huntc
1374ad2ab6 Introduces split on the nRF Uarte
A new `split` method is introduced such that the Uarte tx and rx can be used from separate tasks. An MPSC is used to illustrate how data may be passed between these tasks.
2021-12-15 18:31:52 +11:00
Jacob Rosenthal
5f0fefbd25 dont rely on nrf-usdb 2021-12-14 16:51:34 -07:00
Jacob Rosenthal
3debe604fb sorta works, too many interupts? 2021-12-14 16:48:48 -07:00
Jacob Rosenthal
07cbd41131 dont expose embedded_hal_common::usb 2021-12-14 15:47:54 -07:00
Jacob Rosenthal
f31140a70b revert 2021-12-14 13:51:50 -07:00
bors[bot]
1a7b9e3279
Merge #542
542: nrf/gpiote: remove PortInput, move impls to Input/FlexPin. r=Dirbaio a=Dirbaio

`PortInput` is just a dumb wrapper around `Input`, it has no reason whatsoever to exist. This PR moves the `wait_for_x` functionality to `Input` directly.

It also adds it to `FlexPin` for completeness and consistency with `Input`.

(The reason `PortInput` exists is a while ago `GPIOTE` was an owned singleton that you had to initialize, so `PortInput::new()` would require it to enforce it's been initialized. This doesn't apply anymore now that GPIOTE is "global")

Co-authored-by: Dario Nieuwenhuis <dirbaio@dirbaio.net>
2021-12-14 14:09:59 +00:00
Dario Nieuwenhuis
153b1bbdbf nrf/gpiote: remove PortInput, move impls to Input. 2021-12-14 13:23:40 +01:00
Jacob Rosenthal
535d30335a make send, consolidate usb types 2021-12-13 18:13:42 -07:00
Jacob Rosenthal
83a1237ea3 stub out the embassy registers for usbd 2021-12-13 18:04:54 -07:00
Jacob Rosenthal
e5dc63e8e9 usb feature gate 2021-12-12 21:39:59 -07:00
Jacob Rosenthal
f430c0e8c2 nrf-usbd 2021-12-12 19:20:02 -07:00
huntc
dc3469b297 Documents the nRF BufferedUarte problem
Please see https://github.com/embassy-rs/embassy/issues/536 for the rationale.
2021-12-12 17:52:17 +11:00
Ulf Lilleengen
9b01eed195 Revert blinky changes for now 2021-12-10 12:32:20 +01:00
Ulf Lilleengen
e93f2679b1 More content 2021-12-10 12:27:44 +01:00
huntc
7256ff3e71 Provides AsyncWrite with flush
As per Tokio and others, this commit provides a `poll_flush` method on `AsyncWrite` so that a best-effort attempt at wakening once all bytes are flushed can be made.
2021-12-10 12:16:08 +11:00
huntc
469852c667 Removed unsafe from uarte
The constructors themselves are not strictly unsafe. Interactions with DMA can be generally unsafe if a future is dropped, but that's a separate issue. It is important that we use the `unsafe` keyword diligently as it can lead to confusion otherwise.
2021-12-01 09:14:24 +11:00
bors[bot]
c7d9729028
Merge #486
486: Pwm ppi events r=Dirbaio a=jacobrosenthal

More PWM yak shaving. I was going to do some safe pwm ppi events stuff but I just dont think it fits this api design.. ppi is just very low level, im not sure how safe it will be in general

* first we should probably have borrows of handlers for ppi with lifetime of the peripheral?  hal does eb4ba6ae42/nrf-hal-common/src/pwm.rs (L714-L716)
* in general having access to tasks can put the state in some configuration the api doesnt understand anymore. for `SequencePwm` ideally id hand you back either only seq_start0 or seq_start1 because youd only use one based on if your `Times` is even or odd.. but again we only know that with this api AFTER start has been called. I dont think were ready for typestates

SO I figured why not add the pwm ppi events but make them unsafe and commit this example since I started it.

Somewhat related drop IS removing the last duty cycle from the pin correctly, but stop DOES NOT..the only thing that sets the pin back is pin.conf() as far as I can tell, so I tried to document that better and got rid of stop for the `SimplePwm` again since that doesnt need it then. However its ackward we dont have a way to unset the pwm without setting a new sequence of 0s, or dropping the peripheral


Co-authored-by: Jacob Rosenthal <jacobrosenthal@gmail.com>
2021-11-26 23:08:24 +00:00
Matous Hybl
0ca6060bfd Fix interrupt_take macro by specifying path to panic macro. 2021-11-23 11:00:37 +01:00
Dario Nieuwenhuis
9b17b3d721 Remove unused deps 2021-11-15 20:13:22 +01:00
Bob McWhirter
23fdca9e52 Remove extraneous defmt-trace feature. 2021-11-15 11:33:44 -05:00
Bob McWhirter
a770fc77c9 Adjust all examples to defmt 0.3. 2021-11-15 11:19:19 -05:00
Jacob Rosenthal
2bcacd4f16 nrf: sequencepwm add events 2021-11-13 16:24:41 -07:00
Jacob Rosenthal
aca7b86c7e pwm_sequence show implicit and explicit stop functionality 2021-11-11 23:47:35 -07:00
Jacob Rosenthal
b4cb24c735 pwm_servo example comment for clarity 2021-11-11 23:32:34 -07:00
Jacob Rosenthal
67baec472d nrf: dump the pwm_sequence example for clarity
It is basically impossible to directly convert that example to a sequence for various reasons. You cant have multiple channels on same buffer with one sequence instance for starters, also at that clock rate and max_duty 1 period is far longer than the 3ms it was using, which would require using a new max_duty and thus require regenerating the sine table which makes it not representitive of the original example anymore
2021-11-11 23:31:10 -07:00
Jacob Rosenthal
937f49dead nrf: sequencepwm rename top to max_duty for consistancy 2021-11-11 22:47:57 -07:00
Jacob Rosenthal
ea1c62ff61 fix 2021-11-11 20:12:50 -07:00
Jacob Rosenthal
639034cee4 fix 2021-11-11 19:58:45 -07:00
Jacob Rosenthal
ec66fcd01a pwm_sequence consume buffer 2021-11-11 19:14:29 -07:00
bors[bot]
4112759a8f
Merge #455
455: simple_playback api from nrf sdk r=Dirbaio a=jacobrosenthal

Port of the nrf_drv_pwm_simple_playback call from the nordic sdk that allows you to set up a sequence to play across leds with no interaction necessary using the 'shorts' registers to trigger looping sequences



Co-authored-by: Jacob Rosenthal <jacobrosenthal@gmail.com>
2021-11-11 16:26:36 +00:00
Jacob Rosenthal
2973ff4cf0 remove unstable feature and dependency, and make pwm_sequence a near mirror of pwm example 2021-11-10 18:49:24 -07:00
Jacob Rosenthal
751617c2be fix examples for mut self set_duty 2021-11-10 12:48:15 -07:00
Dario Nieuwenhuis
2221e1fa93 Replace rustflags with build.rs extra-link-args.
Rustflags apply to ALL the crates in the graph, while we only need
them for the toplevel crate which is the only one getting linked.

Rustflags are not equal for all crates, this caused cargo to re-build the
same dependency crate multiple times uselessly. After this change, deps
are reused more, making builds faster.

Note that this only applies when sharing the target/ dir for multiple crates
in the repo which is not the default.
2021-11-07 23:52:11 +01:00
Jacob Rosenthal
b726ef1886 make SequenceConfig struct is consistent with other Config structs, that are always non_exhaustive and have a Default 2021-11-03 18:37:54 -07:00
Jacob Rosenthal
d961fd1015 rename to SimplePwm and SequencePwm 2021-11-03 18:25:44 -07:00
Jacob Rosenthal
44375b427c restore example and add set_time_stretch api 2021-11-03 15:29:09 -07:00
Jacob Rosenthal
c939edb8d0 rename error enum again 2021-11-02 10:57:01 -07:00
Jacob Rosenthal
4647792ad6 seperate start from pwmseq::new 2021-11-01 20:50:18 -07:00
Jacob Rosenthal
49253152cf seperate sequence from duty cycle pwm struct 2021-11-01 20:50:14 -07:00
Jacob Rosenthal
b297e5f7bd led dimming example, dont need to keep all examples, just covering ground to test api 2021-11-01 13:51:40 -07:00
Jacob Rosenthal
5285179218 generalize new and change pwm example to a servo 2021-11-01 13:08:51 -07:00
Jacob Rosenthal
12b2c5d5f7 better not as a constructor? 2021-11-01 08:54:07 -07:00
Jacob Rosenthal
90be851e4b reduce complexity of loopmode 2021-11-01 08:45:07 -07:00
Jacob Rosenthal
14dc524b84 documentation 2021-11-01 01:20:01 -07:00
Jacob Rosenthal
78e382c9aa stop->sequence_stop 2021-10-31 23:13:49 -07:00
Jacob Rosenthal
763e250dfe add ability to configure loop count from 1 to infinite 2021-10-30 16:16:10 -07:00
Jacob Rosenthal
ef95441442 a runtime generated sin table example 2021-10-29 17:10:37 -07:00
Jacob Rosenthal
1d1d8a848e simplify api, more interesting example 2021-10-29 16:39:41 -07:00
Jacob Rosenthal
eb0bf1fd7a simple_playback api from nrf sdk 2021-10-29 16:27:26 -07:00
Dion Dokter
4d3341dbb9 Fixed examples 2021-10-26 14:47:33 +02:00
Dion Dokter
11655af034 Another redo using the feedback.
PPI is now split up into PPI and DPPI under the name 'interconnect'.
The tasks and events are tracked and reset in the drop function.
2021-10-26 14:47:12 +02:00
Dion Dokter
e6ec81b999 Fixed examples and added defmt format to the new error types 2021-10-26 14:46:39 +02:00
Dion Dokter
65628e1f15 - Added _ppi and _dppi to distinguish between the new and the old peripheral.
- Removed ConfigurableChannel and added capacity numbers to the channels
- Replaced the PPI api with a new one using the DPPI terminology (publish & subscribe)
- Updated all tasks and event registers for DPPI
2021-10-26 14:46:39 +02:00
Dario Nieuwenhuis
e78d226acd nrf: add NVMC driver. 2021-10-22 02:14:33 +02:00
Ulf Lilleengen
e807a9eaec Specify unit in log output 2021-10-19 15:32:16 +02:00
Ulf Lilleengen
2ef4a45fa0 Add support for temperature sensor peripheral
* Add TEMP peripheral to all nRF52 chips
* Add async HAL for reading temperature values
* Add example application reading temperature values
2021-10-19 07:18:56 +02:00
huntc
785030df96 Use types to strengthen the buffer dimensioning 2021-10-18 10:26:11 +11:00
huntc
cb56f52b99 Removed the Mode enum and factored out into two functions so that we can assert channel limits 2021-10-18 10:26:11 +11:00
huntc
fa82913bc3 We have to reduce the buffer size to cater for the number of channels to scan 2021-10-18 10:26:11 +11:00
huntc
3be274dc2a We must allow the run handler to mutate state
The handler may well need to close over and mutate state
2021-10-18 10:26:11 +11:00
huntc
103a3305e2 Implements continuous sampling for the nRF SAADC
Implements continuous sampling for the nRF SAADC and also renames `OneShot` to `Saadc`. The one-shot behaviour is retained with the `sample` method and a new `run_sampler` method is provided for efficiently (i.e. zero copying) sampler processing. A double buffer is used for continuously sampling, which wlll be swapped once sampling has taken place.

A sample frequency is provided and will set the internal timer of the SAADC when there is just the one channel being sampled. Otherwise, PPI will be used to hook up the TIMER peripheral to drive the sampling task.
2021-10-18 10:26:11 +11:00
huntc
cef6158c31 Extend SAADC one shot support
One-shot mode now permits the sampling of differential pins, and the sampling of multiple pins simultaneously.

A new ChannelConfig structure has been introduced so that multiple channels can be configured individually. Further, the `sample` method now accepts a buffer into which samples are written.

Along the way, I've reset some default configuration to align with Nordic's settings in their nrfx saadc driver. Specifically, the channel gain defaults to 6 (from 4) and the time defaults to 10us (from 20us).
2021-10-09 11:25:18 +11:00
Dario Nieuwenhuis
0e05ba688d nrf/saadc: remove Sample trait. 2021-10-07 02:10:22 +02:00
Dario Nieuwenhuis
70e5877d68 embassy/channel: switch to use MutexKind 2021-09-13 00:08:41 +02:00
Dario Nieuwenhuis
ead987245d embassy: Refactor module structure to remove kitchen-sink util. 2021-09-11 02:35:35 +02:00
Dario Nieuwenhuis
f2623e7e9b Update lots of deps 2021-09-11 01:35:23 +02:00
Dario Nieuwenhuis
de016e8456 Remove trait_alias, allow(incomplete_features).
trait_alias seems unused. no idea why it's there.
2021-09-03 17:00:58 +02:00
Dario Nieuwenhuis
d0c8749399
Merge pull request #382 from fnafnio/typestate_nrf_timer
Typestate nrf timer
2021-09-02 13:39:55 +02:00
f_punk
34c66fa78d removed type aliases
NotAwaitable as default generic param
added awaitable_timer example
2021-09-02 12:02:31 +02:00
Dario Nieuwenhuis
6b158ba94a nrf/saadc: add example 2021-09-01 23:55:20 +02:00
Dario Nieuwenhuis
297de612e5 Improve executor naming. Add docs. 2021-08-31 23:59:28 +02:00
Dario Nieuwenhuis
3457bb9f05 nrf: make gpiote and time-driver optional via cargo features. 2021-08-20 15:42:42 +02:00
Dario Nieuwenhuis
17659e2e44 nrf/wdt: add handle steal 2021-08-20 14:23:24 +02:00
Dario Nieuwenhuis
fe355af4f0 nrf: update to cortex-m-rt 0.7 2021-08-19 17:11:17 +02:00
Dario Nieuwenhuis
2540a960e5 nrf: add WDT driver 2021-08-07 14:26:28 +02:00
Ben Gamari
f4950c4449 examples: Consistently use unwrap! in favor of .unwrap()
Unfortunately errors from `embedded_graphics` and `core` doesn't provide
the necessary instances currently.
2021-08-05 22:39:59 +02:00
Dario Nieuwenhuis
0ea6a2d890 time: replace dyn clock/alarm with a global Driver trait 2021-08-05 19:14:09 +02:00
Dario Nieuwenhuis
07d4b196f7 Update nightly, remove removed features. 2021-08-04 19:48:14 +02:00
Dario Nieuwenhuis
a1a5acb825 rustfmt everything 2021-08-04 15:25:21 +02:00
Dario Nieuwenhuis
af87031d62 hal-common: remove Pin in PeripheralMutex 2021-08-02 19:55:04 +02:00
Ben Gamari
3420cbf744 examples: Drop build-std = ["core"]
Previously the cargo configurations of all of the example projects had
`build-std = ["core"]`, which forces compilation of `core` as a
code-size optimisation. However, this is strictly unnecessary and will
currently break for users who do not use `rustup` directly (e.g. nix
users).
2021-07-31 13:01:15 -04:00
huntc
3778f55d80 Provides a cleaner construction of the channel with the common "new" naming 2021-07-15 12:31:53 +10:00
huntc
f159beec1c Use of a NoopMutex 2021-07-15 12:31:52 +10:00
huntc
5f87c7808c Remove the cell and trait
At the expense of exposing the channel types again. We do this as we want to avoid using dyn traits given their overhead for embedded environments.
2021-07-15 12:31:52 +10:00
huntc
ae62948d6c Replace UnsafeCell
Using a new ChannelCell so that there's no leaking of the abstraction
2021-07-15 12:31:52 +10:00
huntc
816b78c0d9 Reduces the types on sender and receiver
In exchange for an UnsafeCell being passed into split
2021-07-15 12:31:52 +10:00
huntc
1b9d5e5071 Multi Producer Single Consumer channel
An MPSC inspired by Tokio and Crossbeam. The MPSC is designed to support both single and multi core processors, with only single core implemented at this time. The allocation of the channel’s buffer is inspired by the const generic parameters that Heapless provides.
2021-07-15 12:31:52 +10:00
Liam Murphy
a64dec517c Update RNG example 2021-06-30 12:55:30 +10:00
Liam Murphy
8a4ab29819 Add an nRF RNG driver
Resolves #187

Like the stm32 driver, this has both a non-blocking and blocking API, and implements `rand_core::RngCore` for the blocking API.
2021-06-29 17:26:16 +10:00
Dario Nieuwenhuis
dff03ecfc7 Move examples to a subdirectory 2021-06-02 01:32:19 +02:00